Schlage Electronics Price Book 2017

User Manual: Schlage Electronics Schlage Electronics Price Book Price Book

Open the PDF directly: View PDF PDF.
Page Count: 300 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Effective August 12, 2017 • Rev. 8/17
Schlage
Electronic
security
price book 5
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
Administrative Offices
Allegion Administrative Office
11819 N. Pennsylvania St. • Carmel, IN 46032
allegion.com/us
Customer Care
Our Customer Care Representatives are available for questions or assistance.
You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or
through the email addresses listed below:
Placing orders
You can place orders with Allegion via the fax numbers or emails listed below:
Electronic Products
(Schlage, Electronic Locks, Electromagnetic Locks,
Power Supplies and System Accessories)
Fax#: 1-800-452-0665
Email: Order_Entry_Schlage_Commercial@allegion.com
Sales Support
Carolinas
(North Carolina, South Carolina, Virginia)
Carolinas_Sales_Support@allegion.com
Central
(Arkansas, Illinois, Iowa, Kansas, Missouri,
Nebraska, Oklahoma)
Central_Sales_Support@allegion.com
Chicago
(Illinois-Northern, Wisconsin)
Chicago_Sales_Support@allegion.com
Florida
Florida_Sales_Support@allegion.com
Great Lakes
(New York, Pennsylvania)
Great_Lakes_Sales_Support@allegion.com
Metro New York
Metro_New_York_Sales_Support@allegion.com
Request for Quote
Carolinas
(North Carolina, South Carolina, Virginia)
Carolinas.Quotes@allegion.com
Central
(Arkansas, Illinois, Iowa, Kansas, Missouri,
Nebraska, Oklahoma)
Central.Quotes@allegion.com
Chicago
(Illinois-Northern, Wisconsin)
Chicago.Quotes@allegion.com
Florida
Florida.Quotes@allegion.com
Great Lakes
(New York, Pennsylvania)
GreatLakes.Quotes@allegion.com
Metro New York
Metro.Quotes@allegion.com
Technical Product Support
Schlage Electronic Locks & System Components (Electromagnetic Locks, Power Supplies and System Accessories)
Electronic_Lock_TechProdSupport@allegion.com
Readers, Credentials & Biometrics
Readers_Credentials_Biometrics_TechProdSupport@allegion.com
Von Duprin Electronics (Power Supplies, Electric Strikes, Delayed Exit System, Electrical Power Transfer)
Phone#: 1-866-422-5547
Exits_TechProdSupport@allegion.com
Michigan
Michigan_Sales_Support@allegion.com
Mid Atlantic
(Delaware, Maryland, New Jersey)
Mid_Atlantic_Sales_Support@allegion.com
Midwest
(Indiana, Kentucky, Ohio, West Virginia)
Midwest_Sales_Support@allegion.com
Mountain States
(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)
Mountain_States_Sales_Support@allegion.com
New England
(Connecticut, Main, Massachusetts, New Hampshire,
Rhode Island, Vermont)
New_England_Sales_Support@allegion.com
North Central
(Minnesota, North Dakota, South Dakota)
North_Central_Sales_Support@allegion.com
Michigan
Michigan.Quotes@allegion.com
Mid Atlantic
(Delaware, Maryland, New Jersey)
MidAtlantic.Quotes@allegion.com
Midwest
(Indiana, Kentucky, Ohio, West Virginia)
Midwest.Quotes@allegion.com
Mountain States
(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)
Mtn.States.Quotes@allegion.com
New England
(Connecticut, Main, Massachusetts, New Hampshire,
Rhode Island, Vermont)
NewEngland.Quotes@allegion.com
North Central
(Minnesota, North Dakota, South Dakota)
NorthCentral.Quotes@allegion.com
Northern California
Northern_California_Sales_Support@allegion.com
Northwest
(Alaska, Oregon, Washington)
Northwest_Sales_Support@allegion.com
South
(Alabama, Georgia, Louisiana,
Mississippi, Tennessee)
South_Sales_Support@allegion.com
Southern California
(California-Southern, Hawaii)
Southern_California_Sales_Support@allegion.com
Southwest
(Arizona, New Mexico)
Southwest_Sales_Support@allegion.com
Texas
Texas_Sales_Support@allegion.com
Northern California
NoCal.Quotes@allegion.com
Northwest
(Alaska, Oregon, Washington)
Northwest.Quotes@allegion.com
South
(Alabama, Georgia, Louisiana,
Mississippi, Tennessee)
South.Quotes@allegion.com
Southern California
(California-Southern, Hawaii)
SoCal.Quotes@allegion.com
Southwest
(Arizona, New Mexico)
Southwest.Quotes@allegion.com
Texas
Texas.Quotes@allegion.com
Price Book 5
Effective August 12, 2017 • Rev. 08/17
2
Biometric Readers
Fax#: 1-800-452-0665
Email: Sbsom@allegion.com
Readers, Credentials & Keypads
Fax#: 1-866-954-1779
Email: Readers.Credentials.Orders@allegion.com
Von Duprin Electronic Products
(Power Supplies, Electric Strikes, Delayed Exit
System and Electrical Power Transfer)
Fax#: 1-800-999-0328
Email: Order_VonDuprin@allegion.com
Price Book 5
Effective August 12, 2017 • Rev. 08/17 3
Table of Contents
Contact Information 2
Table of Contents 3
TERMS AND CONDITIONS 4
Allegion General Terms & Conditions
Product Warranties 10
Keyway and Cylinder Policies 14
Distribution Policy 19
Finish Information 19
SOLUTIONS OVERVIEW 21
CREDENTIALS 23
Smart Card Credentials 26
Proximity Credentials 29
Magnetic Stripe Credentials 30
NETWORKED READERS 33
Multi-Technology Readers 36
Magnetic Stripe Readers 36
Contacless Smart Card Readers 36
Proximity Readers 36
Magnetic Stripe Readers 39
iButton Readers 39
Scramble Keypads 40
Electronic Keypads 40
Offline Keypads 40
ENGAGE™ TECHNOLOGY LOCKS 41
LE Series How to Order 43
LE Greenwich Sectional with Rose 52
LE Addison Escutcheon 54
LE Series Parts 56
LE Series Accessories 60
NDE Series How to Order 62
NDE Series Wireless Cylindrical 68
NDE Series Parts 70
AD SERIES NETWORKED LOCKS 75
AD Series How to Order 76
AD-300 Networked Hardwired 90
AD-301 Networked Hardwired (FIPS 201-1 Compliant) 96
AD-400 Networked Wireless 102
AD-401 Networked Wireless (FIPS 201-1 Compliant) 108
AD Series 993 Dummy Trim 114
AD Series Networked Accessories 116
AD SERIES STANDALONE LOCKS 121
AD Series Standalone Locks How to Order 122
AD-201/AD-301/AD-401 Overview 123
AD-200 Standalone; Rights on Locks 134
AD-201 Standalone (FIPS 201-1 Compliant) 140
AD-250 Standalone; Rights on Card 146
AD Series 993 Dummy Trim 152
CT5000 Offline Controller 154
AD Series Standalone Accessories 156
CO SERIES STANDALONE LOCKS 159
CO Series How to Order 160
CO Series Overview 161
CO-100 Standalone; Manually Programmable 172
CO-200 Standalone; Computer or Manually
Programmable with user Rights on Locks 178
CO-220 Standalone; Classroom Lockdown Solution 184
CO-220 Classroom Lockdown Solution - Exit Trim 188
CO-993DT – Non-Functioning Dummy Trim for Exit 190
CO-250 Standalone; Computer Programmable with
user Rights on Magnetic Stripe Card 192
CO-993DT Non-functioning Dummy Trim for Exit 198
CO Series Accessories 200
CT5000 Offline Controller 202
PARTS 205
AD Series Parts 205
CO Series Parts 219
ELECTROMAGNETIC LOCKS 233
M490 Max Security 234
M450 High Security 235
M420 Traffic Control Series 236
M490DE Delayed Egress Series 237
M390RFK Retrofit Lock 238
Filler Plates and Angle Brackets 239
M490G Gate Lock 240
320M Mini Mortise Mount 240
GF3000 Shear Lock Mortise Series 241
GF-3000 Shear Lock Surface Series 242
Electromagnetic Lock Parts 243
POWER SUPPLIES 245
PS902 Power Supplies + Option Boards 246
PS904 Power Supplies + Option Boards 247
PS906 Power Supplies + Option Boards 248
SYSTEM ACCESSORIES 249
8200 Series Consoles 250
800 Series Remote and Local Monitoring Stations 250
672 TouchBar 251
692 SmartBar 252
600 Series Heavy Duty Pushbuttons 253
700 Series Entry Level Pushbutton 254
650 Series Heavy Duty Keyswitches 255
Door Position Switches 256
Door Cords 256
Electronic Horns 257
Scanners/PIRs 257
740 Series Emergency Break Glass 257
660 Series Surface Mini Box 257
442S Series Cabinet Lock 258
PB405/PB405S PowerBolts 258
VON DUPRIN ACCESS CONTROL PRODUCTS 259
4200/6400 Series Electric Strikes 260
5100/6100/6200 Series Electric Strikes 261
6300 Series Electric Strike 262
PS914 Power Supply 262
Delayed Exit System 262
Electrical Power Supply 262
BIOMETRICS 263
General Ordering Information 265
Biometric Readers 266
Biometric Options 267
Biometric Accessories 268
Biometric Parts 269
MISCELLANEOUS 273
Agency Listing 274
Door & Frame Handing Chart 276
System Design Guide 279
Key Systems Summary 281
Wiring Diagrams 295
BAA Order Transmittal Cover Letter 299
4
TERMS & CONDITIONS
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions
1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions
by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase
order” or “order” for the purposes of this Agreement include the term “request for quotation,”
as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and
conditions set forth in any purchase order issued by Customer; (d) No reference herein to
Customer’s purchase order will in any way incorporate different or additional terms and
conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY
COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON
THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS
CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in
whole or in part, for any reason.
2. ORDERS.
a. Order Processing. When Customer wishes to place an order for Deliverables, it will
deliver to Company a purchase order. All such purchase orders must (i) be in a written format
acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include
Customer’s account number, invoice address, ship to address, shipping method, shipper’s
letter of instruction for international shipments, part number, pricing, and designated contact
information, (v) include, if applicable, any special configuration ID numbers, necessary
programming information, special factory instructions, and requested specifications regarding
a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing
discounts under an ongoing buying program or based on a written quote from Company,
along with the applicable buying program number or quotation number, and (vii) not combine
buying program and quoted product on the same order.
b. Minimum Orders. In the event the order value does not meet any required minimum
net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items
in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum
order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of
a requirement for one order shall not constitute a waiver of the requirement for any future
orders.
c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt
of each purchase order issued in accordance with this Agreement, and (ii) notify Customer
whether Company accepts or rejects the purchase order. If Company fails to accept or reject
a purchase order within a reasonable time period, such failure to respond will be deemed a
rejection of the entire order.
Orders that combine buying program and quoted product on the
same order will be routed back to your local SSC office in order to review subject purchase order.
d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding
order changes and cancellations are available on the Allegion customer website, WHICH
TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise
provided herein, Customer acknowledges that (i) requesting a Change Order may cause
a delay in the scheduled shipment date, a longer lead time or result in a new scheduled
shipment date; (ii) Orders may not be changed after 48 hours of Company’s order
acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes
to an accepted purchase order will be subject to a Change Order charge of 25% of the net
Deliverable value, plus the cost of labor and fabrication or raw material that Company
incurred prior to the receipt of the Change Order from Customer, or that may be required due
to the Change Order; (iv) the requested change may result in additional charges for labor,
fabrication, and raw material, and (v) if Customer cancels an order or portion of an order
that includes Deliverables that have been manufactured and prepped for shipping, a 45%
restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel
credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or
nonstandard items once they have been placed. All cancelled orders for a Non Recurring
Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will
be subject to a cancellation charge of 100% of the acknowledged price.
e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as
separate stand-alone orders and must qualify for all terms of sale, including discounts, on an
individual basis.
f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour
Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be
requested by Customer within 24 hours of Company’s order acknowledgment if the order has
not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested
by Customer if the order has not shipped and if the request is made to Company within
48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for
Deliverables must be processed through Fast Track Customer Service.
g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without
penalty only if made within 48 hours of Company’s order acknowledgment, and provided that
the order has not shipped. Some exceptions do apply – please consult the factory. Changes
are not allowed on Rapid Program orders after the order has been entered and acknowledged.
After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject
to a charge of 25% of the order. Unless otherwise specified by Company in writing, any
changes to orders acknowledged by Company that affect the delivery date will be deemed
a new order and will require acknowledgement by Company as provided in this Section.
Additional products, features, terms and conditions regarding the Rapid Program are available
on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED
HEREIN BY REFERENCE.
3. PRICES, INVOICES AND PAYMENT.
a. Prices. The prices in Company’s Price Book are subject to change at any time, without
notice to Customer. Company may charge Customer additional amounts if Customer requests
special packing, marking, shipment, product modification, or engineering services. Oral prices
specified by Company are null and void. Quote numbers must be referenced on Customer’s
purchase order in order for the Company’s quoted pricing to apply. Orders that do not
reference a quote number will receive buy program pricing or book net pricing. Quoted prices
are for those specific products quoted for a specified job, and are subject to the Price Book in
effect at the time Company receives the order.
b. Taxes. Prices do not include any present or future federal, state or local property, license,
privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result
from transactions or any services performed in connection therewith. Any taxes, charges,
or duties imposed by any governmental authority on the sale of Deliverables will be paid by
Customer, in addition to the selling price specified by Company.
c. Payment Terms. Company will deliver to Customer an invoice with each shipment of
Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice
date (subject to any early pay discounts that may be offered to Customer by Company in
its sole discretion). Customer will make all payments in United States dollars. Past due
invoices will be subject to a late payment service charge of 1.5% per month on any overdue
unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law,
whichever is less. Customer shall reimburse Company for all costs of collection, including,
without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to
Company, and such collection costs shall also be subject to interest charges.
4. QUOTATIONS.
a. Project Quotations. Project or new construction quotes are restricted to the specific
project quoted for the quantities, finishes, and series of Deliverables referenced on the quote.
Company reserves the right to require proof of sale of Company products for any quoted
project.
b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the
following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects,
or ii) Sale to a general contractor or installer for new construction. Stock quotations may
not be used for any project containing any Company no-substitution, specified products.
Deliverables purchased under Stock Quotations cannot be redistributed to other Customer
branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual
contracts or sold over the counter to any walk in trade.
c. General. All quotes are subject to this Agreement, unless otherwise specified by
Company, and are subject to change at any time prior to Company’s acceptance of a purchase
order referencing the applicable quote number. Company, its representatives and employees
reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request
to quote a price other than the standard list price, regardless of whether Company or its
representatives or employees have previously quoted discounted prices to the Customer on
some or all of its orders. Customer’s failure to comply with this Section 4 will be considered
a material breach of this Agreement, and will entitle Company to immediately terminate any
purchase orders and/or Customer’s ability to distribute Company’s products.
5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase
money security interest and lien on any and all of Customer’s rights, title and interest in
each Deliverable sold by Company to Customer, wherever located, until the invoice for the
applicable Deliverable(s) is paid in full, including any late charges and costs of collection.
Customer authorizes Company to, and will assist Company in, taking all necessary steps to
perfect and maintain Company’s interest in such Deliverables.
6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its
purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”)
set forth in Company’s credit application, which Credit Terms Customer acknowledges are
subject to change by Company at any time. Company reserves the right to request payment in
advance of shipment or any order or to request adequate assurances for Customer’s payment
of an order and may withhold or stop shipment, without any liability to Company, until
Customer submits payment or adequate assurance of payment.
7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company
products in support of Company-written specifications and will maintain sufficient inventory
to adequately support End Users, installers, and/or general contractors’ needs. Company may
implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure
to comply with such program(s) will be considered a material breach of this Agreement,
and will entitle Company to immediately terminate any purchase order and/or Customer’s
ability to distribute Company’s products. Customer shall, at its own expense, gain and
maintain sufficient knowledge of the industry and products competitive with Deliverables so
as to be able to (a) explain in detail to End Users, installers, and/or general contractors the
differences between the Deliverables and competing products, (b) ensure that an adequate
number of trained, capable and qualified technical personnel with sufficient knowledge of the
Deliverables and who have obtained all necessary licenses and permits are available to assist
End Users, installers, and/or general contractors, and (c) respond to such End Users, installers,
and/or general contractors with respect to the general operation and use of the Deliverables
including, but not limited to, (1) acting as a liaison between the End Users, installers and/or
general contractors and Company in matters requiring Company participation, (2) providing
general product information and configuration support on standard protocols and features,
(3) collecting relevant technical problem identification information, and (4) posting and
distributing any warranty information concerning the Products in accordance with Company’s
instructions. Customer is responsible for all service and support resulting from the re-sale
of any Deliverable to End-Users, installers and/or general contractors, examples of which
may include, but are not limited to, support activities such as installation, initialization,
software set-up, training, trouble-shooting, technical support and field service. In the event
Customer is unwilling or unable to perform said support activities, Company reserves the right
to recover from Customer any and all expenses incurred by Company to resolve the afore-
mentioned End-User, installer and/or general contractor issues. Technical product training is
recommended for Customer in order to fully service and support Deliverables purchased from
Company that are resold to End-Users, installers and/or general contractors.
8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase
order or other contract with Company, Company shall have the right, in addition to all other
legal remedies and without prejudice to any of its right hereunder, to defer further shipments
under that or any other purchase order until such default is corrected and to declare all
outstanding bills of Customer to be immediately due and payable.
9. INSPECTION AND DELIVERY.
a. Inspection. Customer will inspect all Deliverables immediately after receiving them.
Customer will be deemed to have accepted the Deliverables unless Customer notifies
Company in writing of any nonconformance within 10 days of delivery and provides Company
written evidence reasonably documenting that nonconformance. Inspection of Deliverables at
Company’s facility is not permitted.
b. Delivery. Delivery schedules for Deliverables are based upon current production
capacities, material or component availability, and inventory, and may be changed by
Company as conditions require. Delivery schedules for services are based upon Company’s
prompt receipt of, and prompt access to, Customer’s equipment and all information necessary
to complete the services. In no event will any delivery date be construed as falling within the
meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid
for at the price and on the terms stated herein. Any partial delivery shall constitute a separate
sale, and payment shall be separately made when due. If any part of a delivery hereunder
is not delivered by Company in accordance with Customer’s purchase order, this Agreement
shall not be affected thereby.
10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer
is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB
Origin, Company’s factory”; and (ii) where the Customer is located outside of the United
Allegion General Terms and Conditions of Sale and Service
5
TERMS & CONDITIONS
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions
States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In
either instance, title and risk of loss will pass to Customer upon delivery to the carrier at
Company’s factory, provided, however, as set forth herein, Company shall retain a security
interest in the Deliverables until full payment has been made therefore, and Customer
agrees, upon request, to do all things and acts necessary to protect Company’s interest by
adequately insuring the Deliverables against loss or damage from any cause and to have
Company named as an additional insured. Customer will promptly provide Company with a
copy of the relevant certificate of insurance upon Company’s request.
11. SHIPPING.
a. Freight Charges. Company will ship all Deliverables in accordance with Company’s
freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping
Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.
b. Rush Charges. Expedited order options are available as set forth in Company’s Freight
Shipping Guidelines.
c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its
standard procedures for shipment, unless the parties agree, in writing, that Company will
comply with any special instructions provided by Customer. Special instructions may result
in an increased price.
d. International Shipments. For all international orders, a Shipper’s letter of instruction
must be submitted in writing with the order. Failure to do so will result in the order being
rejected. Complete adherence to this order requirement will be strictly enforced. Company
will not be held liable for any charges resulting from delays due to lack of complete
required information being supplied.
e. Once received by the Company, a purchase order cannot be combined with any other
order to increase average order size as it relates to Company’s Freight Shipping Guidelines.
However, for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available
for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day
Program (available for Ives products); or ProExpress (available for specific product lines
stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von
Duprin products), the applicable brands or product categories may, subject to certain order
requirements identified by Company, be combined on a single order to increase average
order size used in Company’s Freight Shipping Guidelines.
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims
for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims
regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days
from the date of delivery; (iii) All claims for damage to Deliverables (while in the care,
custody, and control of Company) must be submitted within thirty (30) days from the date
of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/
or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the
parties.
13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and
revision, and accordingly, Company reserves the right to change, without notice, the design
of, or the process of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable
in any manner contrary to the manner in which the Deliverable is intended to be used; and/
or (ii) not to modify the design of any Deliverable for use with another product without the
prior written consent of Company.
15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables
that are correctly furnished by Company per the purchase order may not be returned
unless Customer receives written authorization from Company. If returns are authorized
by Company, a return merchandise authorization (“RMA”) number must be provided by
Company. Deliverables identified under such RMA must be returned to Company within 90
days of issuance of the RMA. Such RMA number and any accompanying RMA documents,
the original invoice number, and a written explanation for the return must be included
with the returned Deliverables in order for Company to inspect and approve a credit for
the return. For warranty returns, a credit in the amount of the original purchase price
will only be issued if, after Company’s receipt and inspection of the returned Deliverables,
Company confirms, in its sole discretion, the defect is valid and approves the return. For
non-warranty returns/convenience returns, in the event Company approves such a
return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables
requested to be returned shall be a minimum of $250.00; (b) a credit will be made to
Customer’s account in the amount of the original purchase price less freight and a handling
charge of 45% of the net material on the original invoice; and (c) only Deliverables that are
new, current, standard, non-obsolete, non-specially manufactured, unused, in their original
condition as at the time of sale by Company to Customer, in their original packaging and in
Customer’s inventory less than 180 days from the date of shipment by the Company, and
not ordered as part of a master key solution may be considered by Company for return.
Such credit will only be issued if, after Company’s receipt and inspection of Deliverables,
Company approves the return. The amount of final credit will be determined upon receipt
at the factory and following Company’s inspection and analysis of the condition of the
returned material. Company retains the right to deny credit to anyone for any reason.
16. CONFIDENTIAL INFORMATION.
a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of
the Company except for the purpose of performing its obligations under this Agreement or
exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential
Information of the Company from disclosure and unauthorized use in the same manner
that it protects its own Confidential Information, but in no event shall such standard of
care be less than reasonable care. Customer may disclose Confidential Information of the
Company only to its employees who require such information for the Purpose and who are
subject to confidentiality obligations at least as protective as those set forth herein.
b. Proprietary Information and Advice. (a) All designs, data, and specifications provided
by Company are proprietary and may not be disclosed or reused by Customer without the
prior written consent of Company; (b) Company assumes no obligation or liability for any
advice given by Company, the results obtained, or damages incurred as a result of such
advice, and all such advice is given and accepted at Customer’s risk.
c. Return. Upon the termination or expiration of a purchase order or this Agreement
or upon the request of the Company, the Customer agrees to end all further use of, to
immediately return to the Company the original version of, and to delete or destroy all
copies of, any and all Confidential Information of the Company.
17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to
(a) use Company’s name in any form of publicity; or (b) use, create, register or market,
directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other
trademarks, or names that are now or may hereafter be owned by Company, as part of
Customer’s corporate or business name, as part of an internet domain name, uniform
resource locator (URL), or in any way connected with Customer’s business, trade address
or other designations. Upon termination of this Agreement or upon the request of
company for any reason, any use of Company’s trademarks or names will be immediately
discontinued.
18. LIMITED WARRANTY.
COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN
COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY
ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”).
THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK
AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY
INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A
HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN
THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED
BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER
THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL
AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF
SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER
THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S
OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE
DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS
OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE
DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.
a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables
that: (A) are not the proper size for the application; (B) are not installed in accordance
with Company’s published installation instructions; (C) are installed with improper or
incorrect parts and/or are used for purposes for which they are not designed or intended;
(D) have been repaired or altered without the Company’s prior written consent; (E) have
been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored,
installed, maintained or operated; (G) have been used in violation of written instructions
provided by Company to Customer; (H) have been subjected to improper temperature,
humidity, or other environmental conditions, or (I) have been affected by normal wear
and tear. In addition, the provisions of this Limited Warranty do not apply to any defects
or issues with the design or performance of equipment or products not manufactured
by Company, nor does it apply to any code compliance or permit requirements for the
assembly, installation, erection or construction of any goods. Company is not responsible
for loss or damage resulting from use of Deliverables in conjunction with parts or systems
not manufactured by Company. Accessories or products furnished by the Company, but
manufactured by others, shall carry whatever warranty the manufacturers have conveyed
to the Company and which can be passed to Customer.
b. Services. Company warrants that its services will be free from defects in material
and workmanship for a period of 12 months from the date of completion of the particular
items of service. Company’s sole obligation under this service warranty is limited to repair
or reperformance, at its option of the service, provided however, if repair or reperformance
is either impractical or impossible, the Company will refund to Customer that portion
of the price paid to Company for any defective service, provided written notice of the
defect or nonconformance is provided by Customer within 30 days of discovery of the
nonconformance.
c. Notification. Customer agrees to immediately notify Company in writing if any claim is
made against Customer for any damages caused by any modules, parts, products, service or
other Deliverables which may be the direct result of any defect in the manufacture of such
aforementioned products. Customer agrees to cooperate with Company and its counsel in
the defense of such claim and Customer agrees not to settle such claim without Company’s
written consent. If Customer fails to notify Company of such claim or fails to cooperate in
such defense as aforesaid, then Company shall be discharged from any obligations under
this Section and shall have no further liability to Customer.
d. Exceptions. The following costs and expenses are not covered by the provisions of
these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables
or other manufacturer’s products; (ii) shipping and freight expenses required to return
Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition,
the provisions of this warranty are not applicable to anything other than defects in
Company’s material (products only) or workmanship.
19. LIMITATION OF REMEDIES.
CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT
OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)
SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR
OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE
PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT
WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE
DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY
(INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER
ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND
RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS
OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT
(INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING
BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH
COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR
(II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S
SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR
RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN,
MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY
COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.
20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,
defend and hold Company, and its officers, directors, employees, customers, Affiliates,
suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any
and all damages, claims, losses, expenses, costs, obligations, liabilities, including without
limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees,
suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury,
death or loss to any person, or injury to any property (collectively, “Damages”), received
6
TERMS & CONDITIONS
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions
or sustained by any person(s) or property, arising out of, occasioned by, attributable or
related to i) any breach of any representation or warranty made by Customer, its officers,
directors, employees, affiliates, users, agents, representatives or customers to Company or
any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts
and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim
by any third party relating in any way to the obligations of Customer and/or the Deliverables
sold by Company to Customer hereunder. Customer shall not consummate any settlement
of any indemnified claim without the Indemnitees’ prior written consent. Customer’s
obligation to indemnify Indemnitees will continue in full force and effect notwithstanding
the termination or expiration of any order under this Agreement. In any claim against an
Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly
employed by any of them or anyone for whose acts they may be liable, the indemnification
obligations set forth in this Section shall not be limited in any way by or for Customer or any
subcontractor under any applicable worker’s compensation act, disability or other employee
benefit act, or insurance coverage. This provision shall survive termination of any order or
Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES,
CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING,
BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION,
LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS
OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON
OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION,
OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES
ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER
BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO,
STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or
warranty to the Customer that the Deliverables shall not infringe any intellectual property
rights including, without limitations, claims arising from patent, copyright, trademark, trade
secret, or other intellectual property infringement. Customer agrees to hold Company
harmless from and defend the Company against any such claim of intellectual property
infringement, including any Damages resulting from that claim, the cost of complying
with any preliminary or permanent injunction, and all other costs of defense (including the
attorneys’ fees and costs), in connection with the foregoing.
c) To the extent that applicable law does not permit any limitations set out in this
Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will
be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or
willful misconduct. The limitations of remedy and liability herein shall not be interpreted to
affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury,
or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this
Agreement. Further, the limitations of remedy and liability herein shall not be interpreted
to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for
contribution among joint tortfeasors in connection with a claim by a person who is not a party
to this Agreement.
21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI
standards are tested and performed by third-party independent laboratories. Any field
modification or alteration of certified Deliverables will void certification and Company is not
liable to Customer to certify any modified or altered Deliverable.
22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF
THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN
ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
23. CONSUMER PRODUCTS
WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-
MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A)
SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU;
(B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED
TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C)
SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR LOCATION TO LOCATION.
24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform
its obligations hereunder will be excused to the extent that it is caused by an event or
occurrence beyond Company’s control such as, by way of example and not by way of
limitation, acts of God, acts by any governmental authority (whether valid or invalid),
governmental laws and regulations not presently in effect, fires, floods, windstorms,
explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including,
without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant
or their suppliers, inability to obtain power, material, labor equipment, or transportation, or
court injunction or order. The delivery date will be extended for a time equal to that of the
delay and the schedule for Company’s performance will be deemed adjusted to that effect.
25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the
attachments, exhibits, webpages, or supplements specifically referenced and incorporated
herein, constitute the entire agreement between Company and Customer with respect to
the matters contained herein and supersede all previous communications, representations,
or agreements, either oral or written between Company and Customer. No agreement or
understanding varying or expanding this Agreement will be binding upon either party unless it
is in writing and signed by a duly authorized representative of each party hereto.
26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any
agreement, or any part of an agreement or the various documents (including, but not
limited to, electronic documents) between Company and Customer, unless the parties
agree otherwise in writing, the various components of the agreements shall be given the
following precedence (in descending order of precedence): a) any master agreement or long
term agreement between Company and Customer; b) any specific terms, conditions and/
or warranties of the individual products or Deliverables; c) the terms and conditions of this
Agreement, and d) any purchase order.
27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.
Customer shall furnish Company with statements evidencing Customer’s financial condition
as Company may, from time to time, reasonably request, and shall notify Company
immediately of any and all events that may have a material adverse effect on Customer’s
business or financial condition. If Company determines, in its sole discretion, that Customer’s
financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to
Company’s other rights, Company may without liability or penalty, take any of the following
actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii)
cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to
Customer; or (iv) any combination of the above.
Company may immediately terminate an order from Customer by giving written notice to
Customer in the event of the happening of any of the following or any other comparable
event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the
Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an
assignment for the benefit of creditors by the Customer, all of which will allow Company to
demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to
trade; (vi) Company determines that Customer does not meet or no longer meets the credit
requirements of Company or Customer’s credit account is closed; (vii) any Customer violation
of law, specifically including, without limitation, those laws set forth in this Agreement.
In the event of termination in accordance with this section, Company will not be obligated
to accept any existing or additional orders from Customer and Company will be released
from its obligation to deliver under orders accepted prior to such termination. The rejection
or termination of any order by Company will not entitle Customer to any termination or
severance compensation, or to any payment in respect to any goodwill established by
Customer, or render Company liable for damages on account of the loss of prospective
profits, or on account of any loss, expenditure, investment or obligation incurred or made by
Customer.
No action taken under this Section 27 by Company (nor any failure of Company to act under
this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s
obligations, including the obligation of Customer to make payments as required under this
Agreement. Upon termination of any order, all amounts owed by Customer to Company will
become immediately due and payable, whether or not otherwise then due or payable.
28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit
risks with respect to, and for collecting payment for, all Deliverables sold to third parties
(including End Users, installers, and/or general contractors) whether or not Customer has
made full payment to Company for such Deliverables. The inability of Customer to collect
payment for any Deliverable shall not affect Customer’s obligation to pay Company for any
Deliverable.
29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this
Agreement shall be governed by and construed according to the laws of the State of Indiana
(excluding its conflict of laws principles); and not by the provisions of the 1980 United
Nations Convention on the International Sale of Goods. Any disputes or claims shall be
instituted and maintained in the courts of the State of Indiana. Customer consents to the
exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient
forum for any action arising from or relating to this Agreement. Customer agrees to pay for
all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees)
incurred by Company in enforcing the obligations of Customer under this Agreement.
30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document
creates an employment, partnership, joint venture, or agency relationship between Company
and Customer, including that of franchisee/franchisor. No party will have any power or
authority to enter into any commitment on behalf of or otherwise bind the any other party
on any matter. No employee of Customer will be deemed to be an employee of Company.
If any provision of this Agreement is deemed to create a franchise relationship or business
opportunity between the Parties, then Company may terminate any purchase order or
this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as
to effect the original intent of the Parties as closely as possible in a mutually acceptable
manner in order that the transactions contemplated hereby are consummated as a reseller
agreement and not a franchise or business opportunity agreement.
31. SETOFF. Customer does not have the right to setoff or to back charge against any
amounts which become payable to Company under this Agreement or otherwise. Company
will not accept responsibility for backcharges for the cost of material or labor by Customer or
any third party.
32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties
expressly agree to electronic transactions and acknowledge that documents they sign
electronically will bind them to the same extent as a paper signature. Customer represents
and warrants to Company that only employees authorized to bind Customer legally shall
electronically sign any document under this Agreement. Customer shall comply with any
method of electronic communication/payment processing specified by Company, including
electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,
electronic signature, and electronic communication systems, including, without limitation, the
use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails,
even those containing a signature block of one of Company’s representatives, shall not
constitute a signed writing.
33. COMPLIANCE WITH APPLICABLE LAWS.
a. General. Company and Customer will comply with all applicable federal, state and
municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables,
including but not limited to full compliance with any applicable provisions of The Health
Insurance Portability and Accountability Act. Where the Customer is located outside the
United States, or where the customer intends to ship the product outside the United States,
the Customer shall be responsible for compliance with all U.S. export laws, and for filing all
U.S. Electronic Export Information, as applicable.
b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws
and regulations in performing its duties under this Agreement; (ii) it does not and shall not
engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws
or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not
pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value
(including but not limited to cash, gifts and entertainment) to (a) any government official
or employee of any government; (b) any official or employee of any department, agency, or
7
TERMS & CONDITIONS
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions
instrumentality of a government; (c) any employee of any corporation or entity owned or
controlled by a government; (d) any family member of such officials or employees; (e) any
political party, party official, or political candidate; or (f) any other persons, owners, officers,
directors, employees and agents of any corporation or entity; to improperly or illegally assist
in obtaining or retaining business (including but not limited to any contracts, avoidance
of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain
regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase
of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the
Company’s Code of Conduct for Business Partners as set forth on the Allegion customer
website, WHICH IS HEREBY INCORPORATED BY REFERENCE.
c. The Customer shall indemnify and hold the Company harmless from any claim, demand,
expense or cost arising from any breach of this Article.
d. The Customer shall permit the Company to conduct an audit or review of the Customer’s
financial books and records and business operations at such other times that the Company
considers it necessary to confirm compliance with this provision. Such audit may be
conducted by representatives of the Company or, at the Company’s sole discretion, by a
certified public accounting firm selected by the Company. The Customer shall cooperate with
any inquiries from the Company’s Ethics & Compliance Group.
e. A violation of this provision constitutes a material breach of this Agreement and the
Company may terminate any purchase order or this Agreement immediately, with no
opportunity to cure, in accordance with Section 27 of this Agreement.
f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible
for obtaining or maintaining any permits for the performance of services or the verification
or compliance with any code requirements relative to the performance of services, (ii) to the
extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S.
Government, Company’s obligations under this Agreement are conditioned upon the grant of
such approval and upon compliance by Customer with any restrictions imposed by the U.S.
Government in connection with such approval, and (iii) in the event the Deliverables are to
be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or
governmental indemnity protecting Company against liability. The Customer hereby releases
and agrees to indemnify Company and its suppliers for any nuclear damage including, but not
limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be
due, in whole or in part by Company or its suppliers.
g. No Inducements. Each party represents to each other that neither it nor any person
acting on its behalf has, in contravention of any applicable law, given or offered to give or will
give or offer to give, any sum of money or other material consideration to any person, directly
or indirectly, as an inducement to obtain business hereunder or to influence the granting
of licenses or other governmental permissions to enter into this Agreement or perform
obligations hereunder.
h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies
with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1
through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C.
§ 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING
PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as
amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR
§§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration
laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and
Executive Order 13496.
i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business
Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.
34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and
covenants to Company that: (a) it has the right, power, and authority to enter into this
Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and
to its respective Content and Marks for use within the scope of this Agreement, including
the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws,
rules, and regulations in effect that are applicable to its performance under this Agreement,
including obtaining all such approvals and/or permits as may be required hereunder.
35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely
based on the representations contained herein for its own purposes and not for the benefit of
any third party.
36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under
this Agreement shall be in writing and delivered in person, or sent by receipted courier,
express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party
for whom it is intended, at the addresses set forth in this Agreement. Either party may
change its address for notice by giving written notice to the other party. Any notice or other
communication shall be deemed given no later than the date actually received. Notice by
courier, express mail, certified mail, or registered mail shall be deemed given on the date it
is officially recorded as delivered and, in the absence of such record of delivery, it shall be
rebuttably presumed to have been delivered on the third Business Day after it was deposited.
Notices sent by e-mail require tangible confirmation of receipt from addressee.
37. ASSIGNMENT. Customer may not assign this Agreement without the prior written
consent of Company. Company may assign its rights and delegate its duties under this
Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the
event of a spin-off, merger, business combination, consolidation or sale of all, or substantially
all, of its assets or business that are related to this Agreement. The rights and duties in this
Agreement shall bind and inure to the benefit of any such assignee.
38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or
unenforceable under any statute, regulation, ordinance, executive order, or other rule of law,
that provision will be deemed severed to the extent necessary to comply with such statute,
regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties
will negotiate in good faith to arrive at an alternative arrangement approximating the original
business objective of the parties. The remaining terms and conditions of this Agreement will
remain in effect.
39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by
the other party of any provision of this Agreement will in no way affect the right to require
such performance at any time thereafter, nor will the waiver of either party of a breach of any
provision of this Agreement constitute a waiver of any succeeding breach of the same or any
other provision.
40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal
representative of the other party. Neither party is authorized to create any obligation on
behalf of the other party including, but not limited to, the obligation for payment of any
service or warranty obligation hereunder; (b) The rights and remedies herein reserved to
Company are cumulative and additional to any other rights and remedies provided at law or
equity; (c) The official text of this Agreement is in the English language. If this Agreement is
translated into another language, the English text will govern any question with respect to
interpretation; (d) The headings in this Agreement are for convenience of reference only and
do not affect the meaning of this Agreement in any manner.
DEFINITIONS.
Capitalized terms have the meanings set forth in this Section, or in the Section in which they
first appear in this Agreement.
“Agreement” means these Allegion Terms and Conditions of Sale and Service, together
with any applicable Country Supplement or Region Supplement provided by Company, and
all of the documents referenced herein or therein.
“Affiliate” means any Person that directly or indirectly, through one or more intermediaries,
controls, is controlled by, or is under common control with, the Company. The term
“control” (including the terms “controlled by” and “under common control with”) means
the possession, directly or indirectly, of the power to direct or cause the direction of the
management and policies of a Person, whether through the ownership of voting securities, by
contract or otherwise.
“Business Day” means any day except Saturday, Sunday or any other day on which
commercial banks located in the United States are authorized or required by Law to be closed
for business.
“Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling
products that are part of the Allegion product portfolio. Schlage Lock Company and/or its
subsidiary or affiliates will be severally but not jointly liable under the Agreement.
“Company Marks” refers to the Marks of Company.
“Confidential Information” shall mean any and all information provided by either party
to the other party pertaining to the disclosing party’s business. Confidential Information
shall include, but not be limited to, any bitting lists, formulae for products, manufacturing
processes, production techniques, packaging processes, methods, research materials, ideas,
marketing plans and related materials, quality standards, test results and data, apparatus,
engineering drawings, contract documents, computer software, hardware, or firmware,
business activities information such as financial information, reports, projections, books
and records, customer and supplier information, and operations, customer and supplier lists
and data, specifications, know how, and other Proprietary Information or Trade Secrets (as
defined herein) that either party may furnish to the other party. Confidential Information
shall not include information that: (a) is or becomes publicly known if such public knowledge
or disclosure is not the result of any act or failure to act on the part of the receiving party;
(b) is, at the time of disclosure, already known to the Receiving Party without utilizing the
Confidential Information; (c) is information disclosed to the Receiving Party by a third party
which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty
of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving
Party without the use of Confidential Information. The Receiving Party shall have the burden
of proof as to prior knowledge and absence of breach. Confidential Information may be
furnished in any tangible or intangible form including, but not limited to, writings, drawings,
computer and other electronic media, logic diagrams, component specifications, graphs,
prototypes, samples, or verbal communications and regardless of whether such information
is marked or designated as “confidential.” For the avoidance of doubt, all information,
knowledge or data disclosed by Company to Customer, regardless of whether disclosed in
written, tangible, oral, visual or other form, including, without limitation, sample products,
equipment, software, or other objects or material, provided by Company to Customer, and all
information, knowledge or data which was obtained by Customer from visits to Company’s
facilities, shall be considered “Confidential Information” under this Agreement.
“Content” means all information (including without limitation any text, music, sound,
photographs, video, graphics, data or software), in any medium, on a particular Company
Web page or Website or in Marketing Materials.
“Customer” means the purchaser of Deliverables from Company.
“Deliverables” means any good or service or both purchased by Customer from Company
under these General Terms and Conditions of Sale and Service.
“End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i)
its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution
or (ii) incorporation into its own products and (b) is an individual or entity, other than any
federal, state or local agency, office or division.
“IP” means all intellectual property and industrial property rights comprising or relating to/
of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not
Trademarks, registered by any authorized private registrar or Governmental Authority, web
addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and
design registrations, whether or not copyrightable, including copyrights and copyrightable
works, software and firmware, application programming interfaces, architecture, files,
records, schematics, data, data files, and databases and other specifications and
documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial
property rights, and all rights, interests and protections that are associated with, equivalent
or similar to, or required for the exercise of, any of the foregoing, however arising, in each
case whether registered or unregistered and including all registrations and applications for,
and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any
jurisdiction throughout in any part of the world.
“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text,
call scripts or other material, whether in printed format, audio or audiovisual format, or in
any other format, that contain any (i) Content relating to the Company Deliverables or (ii)
Company Marks.
“Marks” means collectively the domain names, trademarks, trade names, service marks,
trade dress, logos, and the like used or provided by either party for use in connection with this
Agreement.
“Patents” means all patents (including all reissues, divisionals, provisionals, continuations
and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof),
patent applications, and other patent rights and any other Governmental Authority-issued
indicia of invention ownership (including inventor’s certificates, petty patents and patent
utility models).
“Person” means a person or entity.
“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable
being purchased by Customer.
“Trade Secrets” means and includes business or technical information of either party,
including processes, formulas, devices, techniques, compilations and other material that
a party attempts to maintain in secret and that derive commercial value for such party
from not being generally known to the public or readily ascertainable through independent
development or reverse engineering.
TERMS & CONDITIONS
8Price Book 5
Effective August 12, 2017 • Rev. 08/17
Additional Terms & Conditions
Prices:
All prices may be subject to discount. Products considered “Specials” (“X” designated part numbers) fall outside of
standard discount terms. Contact Customer Care for clarification.
Minimum Order Size for Channel Discount:
All orders less than $500.00 list shall be discounted at book net.
Commercial
The following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions con-
tained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products
identified in this Price Book.
Claims and Returns: Claims and Returns:
Due to Schlage error: Due to Customer error:
Claims for shortages and/or incorrectly filled orders must be filed with
Customer Service within 30-days of receipt of material.
Incorrect order acknowledgments must be changed by emailing request to
Customer Care territory email box upon receipt of acknowledgment.
Refer to inside cover of this book.
Invoice adjustments must be faxed to Credit Adjustments @ (317) 810-3048
within 30-days of receipt of invoice.
Returned goods will not be accepted without prior written approval from
Schlage. Credit will be based upon the Return Material Authorization (RMA)
issued by Customer Service or the
Allegion
Consultant and final acceptance by
Schlage. Returns must be prominently marked with the RMA number and fol-
low return guidelines on the RMA form.
Product considered being defective after review by the
Allegion
Consultant
must be returned to the Schlage Lock Company facility in Security, Colorado
accompanied by an RMA. Replacement orders for defective product will be
entered by Customer Service at the time of notification.
It is the policy of the Schlage Lock Company
to not accept returns of any materials that are
correctly furnished as per the dealer’s purchase
order.
Return of product due to customer order error
or accommodation must be pre-arranged with
the
Allegion
Consultant and approved by
Business Unit Manager.
Returns are subject to a minimum restocking
charge of 35% for unopened cases.
Materials are not returnable.
Product must be received in original factory
condition and certified as such by Schlage
Receiving.
Charge-backs will not be allowed.
TERMS & CONDITIONS
9
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Additional Terms & Conditions
Order Changes or Cancellations:
Type of Change
Type of Product
• Primus® Keys
Normal Factory
Lead Time items
6 Extended Factory
Lead Time items
1. Change to:
Product, creating a
different SKU number
– Keying Not Accepted
OK within first 2-days
from receipt of order.
If after 2-days, item must
be deleted from order
(see 3, 25% handling
charge will apply) and
entered as a new order
(see 2).
OK within first 10-days
from receipt of order.
If after 10-days, item must
be deleted from order
(see 3, 50% handling
charge will apply) and
entered as a new order
(see 2).
2. Change to:
Increase quantity of
existing item(s)
Add new item(s) Not Accepted
New order with normal lead-time must be generated for
additions. Same terms & conditions will be applied if
requested so long as the original order has not been shipped.
Additions received after the original order ships must be
entered as a new order and will stand-alone for lead-time
and
terms & conditions.
3. Change to:
Delete item(s)
Reduce quantity of
existing item(s)
Cancel order
Not Accepted
OK within first 2-days
from receipt of order.
If after 2-days, subject o
handling charge of 25% of
the net price of the deleted
item(s).**
OK within first 10-days
from receipt of order.
If after 10-days, subject o
handling charge of 50% of
the net price of the deleted
item(s).**
* Includes any change to key symbol, door identification and/or cylinder pinning.
** Handling charges are billed on the original order.
Notes: 1) Change orders must be emailed to your Customer Care territory email box. Please state change order request in subject
line. For questions call (877) 671-7011.
2) Customer Care will acknowledge receipt of change orders and action taken.
3) Change orders resulting in handling charges require customer review prior to change being made.
Commercial
All orders will be acknowledged with scheduled ship dates. Specific scheduled ship dates are not guaranteed by Schlage because of the
nature of product, labor, availability of product or manufacturing conditions that might be beyond our control. Schlage will not be liable for
back charges incurred based on availability of product in accordance with acknowledged ship dates. Selected Products are available to spe-
cific channels of distribution for 1 and 5-day delivery through the
Allegion
FastTrack Program. The
Allegion
FastTrack Program is subject to
separate terms and conditions.
Delivery: Claims and Returns:
For the following: Expect this delivery:
Non-Master Keyed orders Factory items will individually be assigned ship dates based on
current lead times.
Master Keyed orders
or
Non-Master Keyed orders prominently marked on the
order to “Ship Complete”
The entire order will be assigned ship dates grouped by
factory location. Items with longest current lead times determine
ship date for other items from that location.
TERMS & CONDITIONS
10 Price Book 5
Effective August 12, 2017 • Rev. 08/17
WARRANTY
Terms & Conditions
Schlage Electromagnetic Locks
Limited Lifetime Warranty:
Magnetic Coil Assembly. Schlage warrants only to the End User of electromagnetic locks that the magnetic coil assembly of the
electromagnetic locks will be free from defects in material and workmanship for the lifetime of such electromagnetic lock.
Limited 12 Month or 18 Month Warranty:
Electronic Module. Schlage warrants only to the End User of electromagnetic locks that the electronic module of the electromagnetic locks
will be free from defects in material and workmanship for a period of 12 months from the date of shipment of the electromagnetic locks from
an authorized seller to the End User or a period of 18 months from the date of shipment of such electromagnetic locks from Schlage to an
authorized seller, whichever period is shorter.
Limitations:
Schlage’s sole obligation under this warranty is limited to repairing and replacing, at its option, the defective electromagnetic locks.
If Schlage chooses to replace a defective electromagnetic lock as provided herein, Schlage may replace the defective electromagnetic lock with
an equal or upgraded electromagnetic lock, at its option.
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE ELECTROMAGNETIC LOCKS INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHLAGE DOES NOT AUTHORIZE
ANY PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH ELECTROMAGNETIC LOCKS.
This warranty is exclusive and limited to the End User of the electromagnetic locks, and terminates upon the sale or transfer of the
electromagnetic locks or the structure for which the electromagnetic locks are attached.
“End User” is defined in this limited warranty as the initial user of the products.
Exclusions to Warranty:
The provisions of this limited warranty do not apply to electromagnetic locks: (i) used for purposes for which they are not designed
or intended; (ii) which have been repaired or altered without Schlage’s prior written consent; (iii) which have been subjected to misuse, abuse,
negligence, or accident; (iv) which have been improperly stored, installed, maintained, or operated; (v) which have been used in violation of
written instructions provided by Schlage to an authorized seller and/or End User; (vi) which have been subjected to improper temperature,
humidity, or other environmental conditions; (vii) which have been affected by normal wear and tear; or (viii) which, based on Schlage’s or
authorized seller’s examination, do not disclose to Schlage’s or an authorized seller’s satisfaction
nonconformance to the warranty.
The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of
electromagnetic locks; (ii) shipping and freight expenses required to return electromagnetic locks to Schlage or an authorized seller; (iii) normal
maintenance; and (iv) economic losses.
THE PROVISIONS OF THIS LIMITED WARRANTY ARE NOT APPLICABLE TO ANYTHING OTHER THAN DEFECTS IN SCHLAGE’S MATERIAL
OR WORKMANSHIP.
End User’s Remedies:
END USER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF ELECTROMAGNETIC LOCKS THAT
DO NOT CONFORM TO THIS AGREEMENT WILL BE TO SECURE REPAIR OR REPLACEMENT OF THE ELECTROMAGNETIC LOCKS, AT SCHLAGE’S
OPTION. IN NO EVENT WILL SCHLAGE’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE NON-CONFORMING
ELECTROMAGNETIC LOCKS.
Limitation of Liability:
IN NO EVENT WILL SCHLAGE BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES INCLUDING, BUT
NOT LIMITED TO, LOSS OF USE OF THE ELECTROMAGNETIC LOCKS, LOSS OF PROFIT, LOSS OF REVENUE, INTEREST, LOST GOODWILL, WORK
STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OR OPERATION,
OR CLAIMS OF END USERS, WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR
NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Statute of Limitations:
NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY SCHLAGE MAY BE BROUGHT BY END USER MORE THAN ONE
(1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
Consumer Products:
With respect to “customer products” as defined under the Magnuson-Moss Warranty Act (“MMWA”), the following statements are made.
(a) Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to the End User. (b) This warranty gives the End User specific legal rights and the End User may also have other rights which vary from
state to state.
TERMS & CONDITIONS
11
Price Book 5
Effective August 12, 2017 • Rev. 08/17
WARRANTY
Limited Warranty - Networked Readers & Credentials
Limited Lifetime Warranty – Credentials
Schlage Lock Company, LLC (hereinafter referred to as “Company”) extends a limited lifetime warranty to the original end-user purchaser
(“Original Purchaser”) of our Credential, against defects in materials and workmanship under normal use and service.
Limited Lifetime Warranty – Networked Readers
Company extends a limited lifetime warranty to the original end-user purchaser (“Original Purchaser”) of our Networked Reader, against defects
in materials and workmanship under normal use and service.
5-Year Limited Warranty – Networked Reader Keypads
Company extends a five year limited warranty on the Networked Reader Keypad, from the date of shipment, to the original purchaser (“Original
Purchaser”) of our Networked Reader, against defects in materials and workmanship under normal use and service.
1-Year Limited Warranty – Networked Magnetic Stripe Read Head
Company extends a one year limited warranty on the Networked Magnetic Stripe Read Head, from the date of installation (not to exceed two
years from the date of shipment from the factory), to the original purchaser (“Original Purchaser”) of our Networked Reader, against defects in
materials and workmanship under normal use and service.
1-Year Limited Warranty – Magnetic Stripe Credentials
Company extends a one year limited warranty on our magnetic stripe credentials, from the date of shipment, to the original purchaser (“Original
Purchaser”) of our Magnetic Stripe Credential, against defects in materials and workmanship under normal use and service.
“Credential,” “Networked Reader,” “Networked Reader Keypad,” and “Networked Magnetic Stripe Read Head” are collectively referred
herein as “Product.” "Credential" shall not include credentials made of only PVC material.
What Company Will Do:
If a defect arises and a valid claim is determined by Company sole obligation, at its option, is to either repair or replace the Product covered
under this warranty with a new or remanufactured Product. The repair or replacement of the Product, as provided herein, is Original Purchaser’s
exclusive remedy.
Original Purchaser:
This limited warranty only applies to the Original Purchaser of the Products. It is non transferable and does not apply to any subsequent
purchaser.
How to Submit a Claim:
In order to recover under this limited warranty, Original Purchaser must make a claim to Company and, if necessary, present acceptable proof of
purchase. To start a claim submission, the Original Purchaser should contact Product Support at 1-877-671-7011 or 1-512-712-1316.
What Is Not Covered:
The following costs, expenses and damages are NOT COVERED by the provisions of this limited warranty: (1) back charges, labor costs or removal
or re-installation of said products; (2) shipping and freight expenses required to return product to Company; (3) failures, defects, or damage
(including, but not limited to, any security failure or loss of data) caused by any third party product, service, or system connected or used in
conjunction with the Products; and (4) any other incidental, consequential, indirect, special, or punitive damages including, but not limited
to, loss of use of the control panel or video recorder, loss of profit, loss of revenue, loss of interest, lost goodwill, work stoppage, impairment of
other goods, loss by reason of shutdown or non-operation, damage to property, increased expenses or operation, or third-party claims, arising
out of any theory of recovery, including warranty, contract, statutory or tort (including, but not limited to, strict liability or negligence), patent
infringement, or otherwise, even if advised of the possibility of such damages. Credentials made only of PVC material are not covered under this
warranty.
Exclusions to Warranty:
The provisions of this warranty do not apply to any Product which has been damaged due to conditions in which Company has no control
including, but not limited to, catastrophe, improper installation or maintenance, accidents, modification, misuse, abuse, negligence, alteration,
tampering or disassembly, undue electrical discharge or lightning strike, improper storage or use outside its intended and normal manner.
LIMITATION OF LIABILITY:
COMPANY MAKES NO OTHER WARRANTY, CONDITION OR REPRESENTATION OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED,
STATUTORY OR OTHERWISE, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES AND CONDITIONS RELATING TO THE MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED, WHERE ALLOWED BY LAW. IN NO EVENT WILL COMPANY BE LIABLE
FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND.
Additional Terms:
Company does not authorize any person to create for it any obligation or liability in connection with the Product. Company’s maximum liability
hereunder is limited to the original purchase price of the Product. No action arising of out any claimed breach of this warranty by Company may
be brought by the Original Purchaser more than one year after the cause of action has arisen.
Applicability of Local Laws:
This warranty gives you specific legal rights, and you may also have other rights, permitted by law, which vary from state to state. If this Product
is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or
how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this
warranty.
TERMS & CONDITIONS
12 Price Book 5
Effective August 12, 2017 • Rev. 08/17
WARRANTY
Schlage Electric Strikes, System Accessories and Power Supplies
5-Year Limited Warranty – Electric Strikes:
Schlage Lock Company, LLC (the “Company”) extends a five-year limited warranty to the original end-user purchaser (“Original Purchaser”) of
our electric strikes, against defects in materials and workmanship of the mechanical components under normal use and service and, a one-year
limited warranty on the electrical components including the solenoid and wiring.
12-18 Month Limited Warranty:
The Company extends a 12-month limited warranty from date of installation on system accessories and power supplies (not to exceed 18
months from the date of shipment from factory), to the original end-user purchaser ("Original Purchaser") of the products manufactured by
the Company against defects in material and workmanship under normal use and service.
What The Company Will Do:
Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and
encumbrances and accompanied by the statement of defects and proof of purchase, the Company will repair or replace,
at its option, the defective Product.
Original User:
These warranties only apply to the Original User of Products. These warranties are not transferable.
What Is Not Covered:
The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not
limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to
the Company; or (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty,
tort (including, but not limited to strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such
damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation
may not apply to you.
The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii)
which have been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained,
repaired or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to
improper temperature, humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not
prove to the Company’s satisfaction non-conformance to the warranties.
(a) THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND
REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, OBLIGATIONS,
REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING
NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE
OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF
COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING
FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE PRODUCT, ANY COMPONENT THEREOF.
Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection
with the Products. The Company’s maximum liability under these warranties is limited to the purchase price of the
Product that gives rise to the claim. No action arising out of any claimed breach of these warranties by the Company may
be brought by the Original User more than one (1) year after the cause of action has arisen.
CONSUMER PRODUCTS: WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT
(“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA,
IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED ABOVE. (C) SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
TERMS & CONDITIONS
13
Price Book 5
Effective August 12, 2017 • Rev. 08/17
WARRANTY
Schlage Electronic Locks
12-24 Month Limited Warranty:
Schlage Lock Company, LLC (the “Company”) extends a 12 month limited warranty from date of installation, not to exceed 24 months from the
date of shipment from factory, for LE, NDE, CO and AD Series locks and reader modules; GWE wireless gateway; and WPR400, WRI400, TK400,
CT5000, PIB300, and PIM400 wireless accessories to the original user of the products manufactured by the Company (the “Products”)
against defects in material and workmanship from the date of purchase.
What The Company Will Do:
Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and
encumbrances and accompanied by the statement of defects and proof of purchase, the Company will repair or replace,
at its option, the defective Product.
Original User:
These warranties only apply to the Original User of Products. These warranties are not transferable.
What Is Not Covered:
The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not
limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the
Company; or (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (in-
cluding, but not limited to strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not
apply to you.
The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii)
which have been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained,
repaired or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to im-
proper temperature,humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not
prove to the Company’s satisfaction non-conformance to the warranties.
(a) THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND
REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, OBLIGATIONS,
REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING
NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE
OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF
COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING
FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE PRODUCT, ANY COMPONENT THEREOF.
Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection
with the Products. The Company’s maximum liability under these warranties is limited to the purchase price of the
Product that gives rise to the claim. No action arising out of any claimed breach of these warranties by the Company may
be brought by the Original User more than one (1) year after the cause of action has arisen.
CONSUMER PRODUCTS: WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT
(“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA,
IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED ABOVE. (C) SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
TERMS & CONDITIONS
14 Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions Schlage Key Systems Sales Policy
Schlage Key Systems Sales Policy
The following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions con-
tained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products identified in this
Price Book.
Definition-
Standard keyways are C, CE, E, EF, F, FG, G, H, J, K, L. All other keyways are considered restricted.
Everest, Everest Primus, Classic Primus and all other restricted keyway products (Quad, Reversed, Numbered) manufactured by the Schlage
Lock Company are offered for sale by policies set forth per product type and security levels through specific channels of distribution.
Possession of this price book or any other Schlage price book does not constitute “the right to purchase” these products. Please refer to the
sales policy below for terms and condition. The term keyway(s) refer(s) to keyway, key sections or side bit milling.
Standard Classic (Obverse) Key Sections- no restriction
Standard keyways are Classic (Obverse) C, CE, E, EF, F, FG, G, H, J, K, L.
Everest and Everest 29 Open (C and S Key Sections)
Everest and Everest 29 Open (C & S keyways) include non-Primus products with Everest C and Everest 29 S keyways and key sections.
Schlage only sells Everest and Everest 29 Open products to commercial security professionals. Commercial security professionals purchasing
Everest and Everest 29 Open products from Schlage are permitted to stock and to originate or duplicate keys without signature verification.
Purchasers of Everest and Everest 29 open (C & S) are permitted to resell the products in accordance with their distribution agreement to end
users and to other commercial security dealers who have a professional locksmith on staff but are expressly prohibited from selling to:
i) Any residential retail outlet.
ii) Any individual or entity purchasing or selling products through any method of auction.
End User Keyways - Primus / Primus XP levels 3, 4 & 9, Everest D, Everest B, Everest 29 T, Everest 29 R, Quad, Reversed,
Numbered.
End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer or lock-
smith’s use or distribution. The facilities are described as the “ship-to” address pre-authorized by the end user via a letter of authorization
(LOA) or face sheet (depending upon the key system type).
End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Every new end
user system, using these restricted keyways, requires prior approval from the local SSC sales office management.
Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlage account
as the time of the sale, unless authorization has been granted in writing by the local SSC sales office management where the end user reside.
Locksmiths/ dealers’ keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235, Everest 29 R234 & R235.
Locksmith/ dealer key section can be sold to commercial locksmiths/ dealers only.
Right to stock and sell locksmiths/ dealers restricted keyways requires the appropriate written agreement with Schlage and approval by the
local SSC sale office management. Please contact your local SSC sale office for a copy of these contracts and additional information.
Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy.
TERMS & CONDITIONS
15
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Restricted Keyway Policy Terms & Conditions
Restricted Keyway Policy
Everest B, Everest 29 R
All Everest and Everest 29 SFIC (B and R Families) keyways are restricted.
When ordering a new keying system, include the following:
Job (end-user) name, city, state and zip code.
Letter of Authorization (LOA) – Authorized ship-to address for key blanks, cores and cut keys on end-user’s official stationery.
See Forms & Examples for sample letter of authorization.
Numerically defined specifications for expansion of all branches of the key system.
The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to an
existing keying system, include the following:
Job (end-user) name, city, state and zip code.
Facility code previously assigned by Schlage and stamped on all existing keys and blanks.
Registry number of the keying system as established by Schlage.
Letter of authorization on end-user’s official stationery is required when:
- End-user places order with new dealer.
- Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.
See Forms & Examples for sample letter of authorization.
Bitting list (transcript) orders require a letter of authorization on the end-user’s official stationery. Prevailing prices apply.
Everest D, Everest 29 T
All Everest D and Everest 29 T keyways are restricted.
When ordering a new keying system, include the following:
Job (end-user) name, city, state and zip code.
Letter of Authorization (LOA) – Authorized ship-to address for all products on end-user’s official stationery. See Forms &
Examples for sample letter of authorization.
Numerically defined specifications for expansion of all branches of the key system.
The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to an
existing keying system, include the following:
Job (end-user) name, city, state and zip code.
Facility code previously assigned by Schlage and stamped on all existing keys and blanks.
Registry number of the keying system as established by Schlage.
Letter of authorization on end-user’s official stationery is required when:
- End-user places order with new dealer.
- Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.
See Forms & Examples for sample letter of authorization.
Quad, Numbered (“Paracentric”) and Reverse Keyway Family Policy
A letter of authorization from the end-user is required for all orders for restricted keyway plugs, 0-bitted and 1-bitted products and
all key blanks. Restricted keyway products are not available keyed random. The letter of authorization must include the address in
which the materials will be shipped. Keyway or keyway family must be referenced in the letter. Letters must be dated and signed by the end
user. Letters dated more than 6 months prior to the order submission date will not be accepted. Letters for projects that are ongoing may be
older than six months if effective dates are referenced in the letter. With the exception of the signature, all other information must be typed.
Allowable End User Authorizations for Restricted Keyways:
The end user can authorize a dealer or distributor to order and inventory products if they so choose. This authorization requires the
submission of a fully completed “Letter of Authorization” or “Signature Card”, depending on the product type requirements, by the end user
to Schlage.
Construction Core Program Policy
Full size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less the
handling charge, will be issued upon their return to the factory. Please contact customer service for return authorization. Customers may not
deduct payment for construction cores prior to completion of their authorized return.
Control Keys for Interchangeable Cores
A single control key will be added to orders containing interchangeable cores where a new masterkey system, master key system expan-
sions requiring a different control key and all construction core orders are placed and does not include a control key on the purchase order.
Construction core orders will include both a control and user key.
TERMS & CONDITIONS
16 Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions Cylinder Policies
Primus®/ Primus XP Sales Policy
Primus High Security cylinder products manufactured by the Schlage Lock Company are offered for sale through specific channels of distribution, based
on stocking requirements and security levels. Possession of this price book or any other Schlage price book does not constitute “the right to purchase”
Primus products.
Important: In stocking levels where purchase agreements are required, a fully executed purchase agreement, including initial minimum inventory order,
must be in place before any Primus products may be quoted or purchased. Contact your SSC Consultant for specific details.
The prices contained herein apply to Primus Levels 1 through 9 with respect to the actual product. Availability of product is subject
to additional conditions as follows:
PRIMUS/PRIMUS XP LEVEL 1: For retail locksmiths and Schlage dealers. Standard nationwide side bitting by keyway. Stocking level requires a
separate Primus/Primus XP agreement. Initial inventory commitment required for distributors but not for participating locksmiths. Obverse keyways
only. HP, JP and LP section keys are not available.
PRIMUS LEVEL 1 PLUS: For retail locksmiths. A side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor.
Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the wholesaler and the locksmith.
Obverse keyways only. HP, JP and LP section keys are not available. Cylinders are always furnished less key blanks (LKB).
PRIMUS XP LEVEL 1 PLUS: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of the dealer physical
location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial
minimum inventory purchase. Obverse keyways only. Cylinders can be ordered LKB, KD, KA or MK.
PRIMUS/PRIMUS XP LEVEL 2: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealer by
time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum
inventory purchase. Obverse keyways only.
PRIMUS/PRIMUS XP LEVEL 3: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within 2-digit zip code (Level
3G) for orders of 60 - 1,999 Primus cylinders. Orders of fewer than 60 Primus cylinders are randomly assigned a side bitting from a small nationwide
pool of side bittings (Level 3U). Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only.
PRIMUS/PRIMUS XP LEVEL 4: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within a time zone (Level 4Z)
for orders of 2,000 - 3,999 Primus cylinders. A nationwide exclusive side biting (Level 4N) is assigned to key systems of 4,000 or more Primus cylinders.
This exclusivity can be purchased for a separate fee for smaller quantities of cylinders. This price book does not contain the fee schedule. Contact your
SSC Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only.
PRIMUS LEVEL 7: For retail locksmiths. Side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. Stocking
level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the Schlage wholesaler and the locksmith.
Same as Level 1 PLUS above, but with Everest S Family keyways only.
PRIMUS XP LEVEL 7: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of of the dealer physical location
zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum
inventory purchase. All Everest 29 key sections. Cylinders can be ordered MK, KA, KD or LKB.
PRIMUS/PRIMUS XP LEVEL 8: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealer by
time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum
inventory purchase. Equivalent to Level 2 above, but with Everest S Family keyways only.
PRIMUS/PRIMUS XP LEVEL 9: End user level not stocked by dealers. Key systems are assigned varying degrees of geographically exclusive side
bittings based on a sliding scale of purchase commitment or separate fees. This price book does not contain the fee schedule. Contact your SSC
Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Level 9U, 9G, 9Z, and 9N are equivalent to
Levels 3U, 3G, 4Z, and 4N above, but with Everest S and T Family keyways.
The following side bit milling exclusivity criteria apply to both levels 3, 4 & 9:
1- 60 cylinders-Random assignment
61-1999 cylinders-First two digits of zip-code
2000-3999 cylinders-Time-Zone Exclusivity (also available for $10,000 fee for an organization who
would like this exclusivity and doesn’t meet cylinders quantity requirement).
4000 + cylinders-Nation Wide Exclusivity.(also available for $40,000 fee for an organization who would
like this exclusivity and doesn’t meet cylinders quantity requirement).
Classic KeywaysEverest® Keyways
Important Ordering Information
See Forms & Examples: Primus and Everest 29 Primus Ordering Checklist for a checklist of information required to process a Primus order. Note that, for
security reasons, all end user Primus levels (Level 3, 4 and 9) require a Facesheet (MS-E120) bearing an original signature. Opening orders for end user Primus
levels also require a Signature Card (MS-E130) bearing original signatures. Facesheets and signature cards are used to authenticate the end user request for
product, therefore orders received without the correct supporting documents (or without original signatures) are subject to delays or cancellations. Blank
Facesheets and Signature Cards are included in the Forms & Examples section of this price book for your reference. Additionally, electronic version of these
forms are available at allegion.com/us.
The Schlage Lock Company reserves the right to make changes in designs and specifications, to make additions or improvements on its products, or to
discontinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition, or alteration to our
products by others.
Inventory commitment Requirements-Commercial Locksmiths Levels
Primus XP Everest 29 Primus XP
Level 1 None N/A N/A
Level 1+ $7,500 Level 7 XP $7,500
Level 2 25,000 Level 8 $25,000
TERMS & CONDITIONS
17
Price Book 5
Effective August 12, 2017 • Rev. 08/17
1
LEVEL
1
+
LEVEL
2
LEVEL
3
LEVEL
4
LEVEL
7
LEVEL
8
LEVEL
9
LEVEL
Strip Mall Shops
Small Businesses
Upscale Homes
Small Businesses
Restaurants
Doctor's Offices
Office Buildings
Banks
Private Schools
Healthcare Residences
Educational Facilities
Healthcare Facilities
Large Office Complexes
Government Buildings
Detention Centers
Franchises
T ypical Applications
National Non-Exclusive
Stocked by distributors and resold to
end users via commercial locksmiths;
All Level 1 Locksmiths have the same
side bittings.
Dealer Exclusive
Owned and stocked by dealers then
resold to end users. Keys bear a unique
ID based upon time-zone exclusivity of
side-bitting.
End User Exclusive
Exclusivity is based on either random
assignment, on the first 2 digits of the
zip code, on time zone, or on a
nationwide basis, depending on end
user commitment.
Dealer Exclusive
Owned and stocked by dealers then
resold to end users. Keys bear a unique
ID based upon time-zone exclusivity of
side-bitting.
End User Exclusive
Exclusivity is based on either random
assignment or on the first 2 digits of the
zip code, depending on end user
commitment.
End User Exclusive
Exclusivity is based on either a time
zone or nationwide basis, depending on
end user commitment.
Consider Everest Open for
Commercial Exclusivity
Dealer Controlled SystemsEnd User Exclusive
Dealer Controlled SystemsEnd User Exclusive
XP Dealer
Exclusive
Owned and
stocked by
dealers then
resold to end
users. Keys bear
unique ID based
upon three digits
zip-code
exclusivity of side
bitting.
Primus
Wholesaler/
Locksmith
Exclusive
Locksmiths resell
wholesaaler’s side
bitting to end
users; keys bear
locksmith ID
number.
XP Dealer
Exclusive
Owned and
stocked by
dealers then
resold to end
users. Keys bear
unique ID based
upon three digits
zip-code
exclusivity of side
bitting.
Primus
Wholesaler/
Locksmith
Exclusive
Locksmiths resell
wholesaaler’s side
bitting to end
users; keys bear
locksmith ID
number.
R
R
Cylinder Policies Terms & Conditions
Electronic Validation from Schlage
Electronic Validation (e-validation) is an online system for the use of the end user to create electronic authorizations replacing the
letter of authorization (LOA) and Primus Facesheet processes. This online validation system is designed to ease the burden of an end
user providing authorizations for ordering restricted key and cylinder products on their behalf. Through this system, the end user can regis-
ter for an online account with Schlage that will allow them to manage their shipping addresses, shipping contacts and additional autho-
rized users for their restricted products. Through this system, they can then generate an electronic Facesheet that they can provide to the
distributor of their choice to allow an order for restricted products to proceed. Enrolling in and using this feature will reduce the overall
time for an order to be processed from the time that the end user has determined the need for product. The electronic Facesheet
provided by the e-validation system can be faxed or emailed along with a distributors order reducing the time and energy required for
original copies of Facesheets previously required. The system is for both new and existing restricted key system owners. For new
restricted systems, a registration process will provide the ability to create the initiating Facesheet for the project.
Products/key systems eligible for e-validation:
Everest – B and D restricted family of keyways
Everest 29 – R and T restricted family of keyways
Primus – All keyway families that include the Primus feature
Primus XP – All keyway families that include the Primus XP feature
E-validation can be accessed at the following web address: HTTPS://mycredentials.allegion.com
TERMS & CONDITIONS
18 Price Book 5
Effective August 12, 2017 • Rev. 08/17
Terms & Conditions Cylinder Policies
All goods are shipped F.O.B. factory and become the customer’s property when they pass into the hands of the transportation company.
Schlage reserves the right to use our choice of carrier.
Keyway Family of Master Key System Standard Method of Shipment
Classic Restricted (Numbered, Quad and Reverse)
Classic Primus (Obverse and Quad)
Everest Restricted (B and D Family)
Everest 29 Restricted (R and T Family)
Everest Primus (C and D Family)
Everest 29 Primus and Primus XP (S and T Family)
Classic Open (Obverse)
Everest Open (C Family)
Everest 29 Open (S Family)
2-Day Air
Tracking number is assigned to shipment
Recipient’s signature is required upon delivery
Schlage Default Keyways
Schlage Commercial products (excluding Portable Security)
Default keyway is Everest 29 S123
For other optional keyways, please specify
Schlage Electronics
Default keyway is Everest 29 S123
For other optional keyways, please specify
Portable Security - Kryptonite:
default to C keyway KD
For made to order products, please specify the keying and keyway
Schlage Residential: (F, B60, Dexter)
Default keyway is C
Master Key Shipment Policy
TERMS & CONDITIONS
19
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Distribution Function and Location Policy
The Schlage customer relationship includes the nonexclusive area of primary sales responsibility and the channel of distribution assigned by Schlage. It is
vital to our success and for the effective management of the distribution of our products that the Schlage customer relationship, once it is satisfactorily
established between us, should not be changed without our approval. Therefore, after selection by Schlage as a distributor of one or more of Schlage
products, a customer should continue to perform that distribution function from the location of its business at the place or places utilized at the time of
selection. A customer should not change its Schlage distribution function or establish a different or additional location without the prior written consent
of Schlage.
Schlage reserves the right to discontinue, after appropriate notice, sale of its products to any customer which refuses to adhere to this policy. Schlage
also reserves the right to change, in its sole discretion, the number and locations of the distributors authorized to distribute its products in any area. This
determination will be based upon, among other considerations, the success or failure in developing the market for Schlage products.
Distribution Policy and Finishes Terms & Conditions
Hardware Finishes
Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel or other materials. Where
required, a protective clear coating is applied and cured under high temperature. It is important that climatic conditions and usage be taken under
consideration when selecting finishes. This is especially true in areas subjected to strong corrosive vapors, humid climate or sea air which, in a short time,
may have a damaging effect on metal finishes. The longevity and preservation of the finish appearance is determined by base metal and finishing
process. Clear protective coating or other organic finishing applications may require different methods of cleaning and care. As an example, non-clear
coated finishes should not be cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive
soap and buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning or
preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of
base metal of finishing process. A, AL, CS, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based material and are plated to match
finishes indicated. L-Series will utilize a brass material for 612 and 613 finishes. Finishes of latches, strikes, cylinders/cores, and visible mounting screws,
though similar in appearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders Hardware Manufacturers
Association) industry standard.
Commercial Finish Codes and Descriptions:
The nearest old U.S. equivalent code designations are shown in parenthesis ( ).
Symbol Description
605 (3) BRIGHT BRASS, Clear Coated
606 (4) SATIN BRASS, Clear Coated
609 (5) ANTIQUE BRASS, Satin Brass, Blackened,
Satin Relieved, Clear Coated
612 (10) SATIN BRONZE, Clear Coated
613* (10B) OIL RUBBED BRONZE, Oxidized Satin
Bronze, Oil Rubbed, No Coating
619 (15) SATIN NICKEL, Satin Nickel Plated,
Clear Coated
*
Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys
and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed
bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.
Symbol Description
622(19) MATTE BLACK, Coated
625 (26) BRIGHT CHROMIUM PLATED, No Coating
626 (26D) SATIN CHROMIUM PLATED, No Coating
629 (32) BRIGHT STAINLESS STEEL, No Coating
630 (32D) SATIN STAINLESS STEEL, No Coating
643e AGED BRONZE, Clear Coated
TERMS & CONDITIONS
20 Price Book 5
Effective August 12, 2017 • Rev. 08/17
Notes
TERMS & CONDITIONS
21
Price Book 5
Effective August 12, 2017 • Rev. 08/17
For more than 100 years Allegion brands have been providing innovative access control solutions. We are at
the forefront of access control innovation, including contactless smart credentials, wireless security products
and biometrics.
Allegion electronic security offers the most extensive range of access control and security management
solution on the market today. This comprehensive line of products allow you to build a complete access control
system from the ground up. For facilities with existing access control systems, the open architecture design of
Allegion electronic security products facilitates easy integration into your existing system. Because Allegion
understands that your needs will evolve over time, Allegion also provides the opportunity for an easy migration
path as technology advances.
At Allegion, we understand that each facility has unique security requirements. Our extensive line of products,
flexible options and ability to adapt to your existing environment make it easy to find a solution that will fit
your security needs...whatever they may be.
Integrated
Electronic Locks
• LE Series
• NDE Series
• AD Series
• CO Series
Biometrics
• HandReaders
• Accessories
System Components
• Electromagnetic Locks
• Power Supplies
• System Accessories
• Electric Strikes
Readers & Credentials
• Credentials
• Readers
Allegion Solutions Overview
TERMS & CONDITIONS
22 Price Book 5
Effective August 12, 2017 • Rev. 08/17
Allegion Solutions Overview
Credential Compatibility
PIN
Magnetic Stripe (1,2,3 Track)
Proximity Card (125 kHz)
Smart Card (13.56 MHz)
iButton
Biometric (Hand Geometry)
FIPS 201-1 Compliant
LE/NDE
Series
Readers
Multi-Technology Reader X X
AD Series
Readers
AD Series Keypad Reader (KP) X
AD Series Magnetic Stripe + Keypad Reader (MGK (Insert) or MSK (Swipe) X X
AD Series Magnetic Stripe Reader (MG (Insert) or MS (Swipe)) X
AD Series Multi-Technology + Keypad Reader (MTK) X X X
AD Series Multi-Technology Reader (MT) X X
AD Series Multi-Technology FIPS 201-1 Compliant Reader (FMK) X X X X
CO Series
Readers
CO Series Keypad Reader (KP) X
CO Series Magnetic Stripe (Swipe) + Keypad Reader (MSK) X X
CO Series Magnetic Stripe (Swipe) Reader (MS) X
CO Series Proximity + Keypad Reader (PRK) X X
CO Series Proximity Reader (PR) X
Networked Readers
PR10 Proximity Reader - Mini Mullion X
SM10 Contactless Smart Reader - Mini Mullion X X
MT11 Multi-Technology Reader - Mullion X X X
MT15 Multi-Technology Reader - Wall Mount X X X
MTK15 Multi-Technology Reader with Keypad - Wall Mount X X X X
MTMS15 Multi-Technology Magnetic Stripe Reader - Wall Mount X X X X
MTMSK15 Multi-Technology Magnetic Stripe Reader with Keypad - Wall Mount XXXX X
SMR5 Magnetic Stripe Card Reader X
SMR10 Magnetic Stripe Card Reader X
SMR20 Magnetic Stripe Card Reader + Keypad X X
SRT-100 iButton Mullion Mount Reader X
SERIII-W Scramble Keypad X
SERII-WB Scramble Keypad X
SEKPDMWG Electronic Keypad - Mullion Mount X
SEKPDWG Electronic Keypad X
SEKPD8B Electronic Keypad X
Biometrics
HandKey-2 (F Series) XXXX X
Allegion offers comprehensive security solutions for each facility.
To help you identify which solution is right for your facility, here are
some reader technologies with their compatible credential technologies.
Allegion readers and credentials are designed on an open architecture
platform. For more details on compatibility, please refer to the data sheets.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 23
CREDENTIALS
Pricing/product description subject to change without notice.
CREDENTIALS - TABLE OF CONTENTS
Credentials Overview 24
How to Order 25
Schlage Smart Credentials 26
Schlage Smart Credentials using MIFARE® DESFire® EV1 26
Multi-Technology: Proximity and Schlage Smart Credentials
using MIFARE DESFire EV1 26
Schlage Smart Credentials using MIFARE Plus®
Multi-Technology: Proximity and Schlage Smart Credentials
using MIFARE Plus 27
Schlage Smart Credentials using MIFARE Classic® 28
Multi-Technology: Proximity and Schlage Smart Credentials
using MIFARE Classic 28
Schlage Smart Wristband using MIFARE Classic 28
Schlage Mobile Credentials 28
Schlage Proximity Credentials 29
Schlage Credentials - Other
Proximity Credentials (37 bit, Facility Code 1462) 30
Magnetic Stripe Credentials 30
iButton Credentials 30
Slot Punch Options 31
877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective
Products, General Sales Questions
Technical Questions/Issues, Returns of
Defective Products, Repairs
Email Requests to: Sales Support contact
information on Page 2.
Contact For Technical Assistance:
Readers_Credentials_Biometrics_TechProdSupport@allegion.com
Inside Sales 855-248-0302
General Sales Questions, Pre-printed cards, CardTrax Accounts
ElectronicInsideSales@allegion.com
For Credentials Warranty Information please see page 11.
Table of Contents
Special Note: As of September 2017, all aptiQ and
XceedID credentials will transition to the Schlage
brand. Although the brand name has changed,
all part numbers and products remain the same.
Forward and backward compatibility does not
change and products may be used interchangeably.
Please see chart on page 24 for transition details.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
24
CREDENTIALS
Pricing/product description subject to change without notice.
With the latest in smart card technology and traditional proximity technology, we have an option for every budget and business need.
Smart Credentials
Ideal for facilities with moderate to high security needs, Schlage smart credentials put you in control by delivering smarter solutions. Through the
use of MIFARE Classic®, MIFARE Plus® or MIFARE® DESFire® EV1 technology, these credentials protect your most sensitive data by utilizing extra layers
of security protection. Smart credentials can be used for many applications beyond access control including transit, cashless vending, and cafeteria
point of sale.
Proximity Credentials
Schlage proximity credentials are an excellent solution for facilities with less demanding security needs. Utilizing 125 kHz proximity technology, these
credentials are a cost effective solution and are able to interface with many industry leading proximity readers.
Multi-Technology Credentials
Schlage multi-technology credentials are extremely exible. Particularly useful during a transition from proximity technology to smart technology,
these cards can be read by both proximity readers and smart readers. This allows your customers to economically migrate to the latest smart
technology at their own pace.
Schlage Mobile Credentials
Schlage offers a new way of delivering mobile credentials to your students’ and employees’ phones. Through the use of near eld communication
(NFC), a smartphone app works just like an ID card, providing more for your students and employees while enhancing the security of their credential.
Easily assign credentials today using the access control software of one of our developer network partners or use our web-based portal. Schlage
mobile credentials offer a much higher level of security, based on encrypted smart card technology, featuring a 128 bit AES encrypted credential and
utilizing patent-pending anti-playback technology.
Credentials Overview
Credential Brand Transition Guide
Old Brand New Brand Part # (no change) Product Description (no change)
aptiQ Schlage 8000 Series (eg: 8520) Smart credentials using MIFARE® DESFire® EV1 technology: cards,
fobs, adhesive patches, etc.
aptiQ Schlage 9000 Series (eg: 9551) Smart credentials using MIFARE Classic® technology: cards, fobs,
adhesive patches, wristbands, etc.
aptiQ
XceedID Schlage IBF-110/151
IBWB-110/151 iButton Keyfobs using MIFARE Classic® or Proximity technology
XceedID Schlage 7000 Series (eg: 7410) Proximity credentials: cards, fobs, adhesive disks, etc.
aptiQmobile aptiQmobile
and Schlage 9100 Mobile credentials
*aptiQmobile web portal and marketing materials will be dual-branded, app will remain aptiQmobile until 2018.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 25
CREDENTIALS
Pricing/product description subject to change without notice.
Schlage Mobile Credentials Ordering Instructions
The ordering process and channels through which mobile credentials are ordered is identical to physical cards. Be sure to include the customer name
on the PO. Credential programming information is not needed on the PO.
Specify Programming Information
Part Number Bit Format Facility Code Start Number Quantity
CardTrax
Number
Special
Instructions
Internal
External
Please submit orders to Readers.Credentials.Orders@allegion.com with purchase order.
Available Bit Formats:
Bit formats
Facility Code
Range Number Range Prox Smart
26A (125kHz Standard) 0-255 0-65,535 Y Y
26A PSK Format*
Specify Cong ID 00030000 0 - 255 0 - 65,535 Y N
32X N/A 0-1,073,741,823 Y Y
34N 0-255 0-65,535 Y Y
34S 0-4,095 0-1,048,575 Y Y
35X 0-4,095 0-1,048,575 Y Y
35C 0-4,095 0-1,048,575 Y Y
36X 0-4,095 0-2,097,151 Y Y
37H Not Applicable 0-34,359,738,367 Y Y
37X 0-65,535 0-524,288 Y Y
40X (13.56MHz Standard) 0-1,023 0-268,435,455 N Y
48X 0 – 1,048,575 0-1,048,575 N Y
*Compatible with HID's 26-A bit Indala brand proximity readers
Available Form Factors:
Clamshell ISO – Glossy White Keyfob
Adhesive
PVC Disk
Adhesive
PVC Patch
Dimensions
(HWT in inches) 3.37x2.125 x0.075 3.37x2.125x0.033 2x1.24x0.038 35 mm 3.37x2.125x0.033
Programming
Information
Part number – Refer to pages 26-31
Bit Format – Example 26 bit; See bit format chart below. If you have questions, contact your sales representative.
Facility code - See bit format chart below. If you have questions, contact your sales representative
Start Number – Specify the internal and external start numbers. By default, the internal number matches the external number; please
specify if this is not your desired option.
No Programming – If you would like your smart cards blank, please make sure include NP in special instructions . If you would like your
proximity cards blank, please make sure you include either 88i or initialized as they cannot be non programmed.
Slot Punch – Punch mark guides are on all ISO cards. Clamshells are punched on the landscape prole. Please specify slot punch orientation.
Custom Artwork – Please note any custom artwork requests, and contact Inside Sales at 855-248-0302 for further instruction.
CardTrax - CardTrax format is a unique 40 bit format for smart cards and 35 bit format for prox cards. Cards will automatically be provided
as “next in line" unless otherwise specied.
How to Order
Allegion, the Allegion logo, and XceedID are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other
countries. All other trademarks are the property of their respective owners.
HID and Indala are both ® resistered.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
26
CREDENTIALS
Pricing/product description subject to change without notice.
Smart Credentials
Schlage Smart Credentials using MIFARE® DESFire® EV1 Technology
• Formerly aptiQ Smart Credentials. Part numbers and products remain the same and retain the same compatibility.
• 13.56 MHz smart technology
• Uses MIFARE DESFire EV1 Technology
• Meets ISO standard 14443A (Minimum order is 100)
8420 Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit Clamshell $7.10
8440* Schlage MIFARE DESFire EV1 Smart Card 4K byte/32k bit Clamshell $8.00
8480* Schlage MIFARE DESFire EV1 Smart Card 8K byte/64k bit Clamshell $9.80
8520 Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit ISO Glossy White $7.70
8540 Schlage MIFARE DESFire EV1 Smart Card 4K byte/32k bit ISO Glossy White $8.60
8580 Schlage MIFARE DESFire EV1 Smart Card 8K byte/64k bit ISO Glossy White $10.40
8520M1 Schlage MIFARE DESFire EV1 Smart Card 2K byte/16k bit with Magnetic Stripe ISO Glossy White $8.40
8540M1 Schlage MIFARE DESFire EV1 Smart Card 4K byte/32k bit with Magnetic Stripe ISO Glossy White $9.30
8580M1* Schlage MIFARE DESFire EV1 Smart Card 8K byte/64k bit with Magnetic Stripe ISO Glossy White $11.10
8620 Schlage MIFARE DESFire EV1 Smart 2K byte/16K bit Keyfob (minimum order of 50) $8.00
8640** Schlage MIFARE DESFire EV1 Smart 4K byte/32K bit Keyfob (minimum order of 50) $8.90
8680** Schlage MIFARE DESFire EV1 Smart 8K byte/64K bit Keyfob (minimum order of 50) $10.50
8720* Schlage MIFARE DESFire EV1 Smart 2K byte/16k bit PVC Adhesive Patch $7.00
8740* Schlage MIFARE DESFire EV1 Smart 4K byte/32k bit PVC Adhesive Patch $7.90
8780* Schlage MIFARE DESFire EV1 Smart 8K byte/64k bit PVC Adhesive Patch $9.60
Multi-Technology: Proximity and Schlage Smart Cards using MIFARE® DESFire® EV1 (Minimum order is 100)
8920* Proximity and Schlage Smart Card Combo 2K byte/16k bit ISO Glossy White $11.30
8940* Proximity and Schlage Smart Card Combo 4K byte/32k bit ISO Glossy White $12.30
8980* Proximity and Schlage Smart Card Combo 8K byte/64k bit ISO Glossy White $14.20
8920M1 * Proximity and Schlage Smart Card Combo 2K byte/16k bit with Magnetic Stripe ISO Glossy White $11.70
8940M1 * Proximity and Schlage Smart Card Combo 4K byte/32k bit with Magnetic Stripe ISO Glossy White $12.70
8980M1 * Proximity and Schlage Smart Card Combo 8K byte/64k bit with Magnetic Stripe ISO Glossy White $14.60
* Lead Time: 4-6 weeks
** Lead Time: 6-8 weeks
Custom Artwork and Laser Engraving is available for all ISO and Clamshell cards.
Contact Inside Sales at 855-248-0302 or ElectronicInsideSales@allegion.com for more information.
If there is a specific card combination that you do not see listed in the price book,
please contact your sales representative for information on special orders.
COMING Q4 2017!
Contact your Customer Care or Sales
representative for details.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 27
CREDENTIALS
Pricing/product description subject to change without notice.
Smart Credentials
Schlage Smart Credentials using MIFARE Plus® Technology
• 13.56 MHz smart technology
• Uses MIFARE Plus Technology
• Meets ISO standard 14443A (Minimum order is 100)
5451 Schlage MIFARE Plus SE Smart Card 1K byte/8k bit Clamshell $6.90
5551 Schlage MIFARE Plus SE Smart Card 1K byte/8k bit ISO Glossy White $7.00
5551M1 Schlage MIFARE Plus SE Smart Card 1K byte/8k bit with Magnetic Stripe ISO Glossy White $7.60
5540 Schlage MIFARE Plus S Smart Card 4K byte/32k bit ISO Glossy White $10.00
5540M1 Schlage MIFARE Plus S Smart Card 4K byte/32k bit with Magnetic Stripe ISO Glossy White $10.60
5951 Proximity and Schlage MIFARE Plus SE Smart Card Combo 1K byte/8k bit ISO Glossy White $10.10
5951M1 Proximity and Schlage MIFARE Plus SE Smart Card Combo 1K byte/8k bit with Magnetic stripe ISO Glossy White $10.70
5940 Proximity and Schlage MIFARE Plus S Smart Card Combo 4K byte/32k bit ISO Glossy White $11.50
5940M1 Proximity and Schlage MIFARE Plus S Smart Card Combo 4K byte/32k bit with Magnetic Stripe ISO Glossy White $12.10
5651T Schlage MIFARE Plus SE Smart 1K byte/8k bit Thin Keyfob $7.30
5691T Proximity and Schlage MIFARE Plus SE Smart Combo 1K byte/8k bit Thin Keyfob $10.60
5751 Schlage MIFARE Plus SE Smart 1K byte/8k bit PVC Adhesive Patch $6.80
Custom Artwork and Laser Engraving is available for all ISO and Clamshell cards.
Contact Inside Sales at 855-248-0302 or ElectronicInsideSales@allegion.com for more information.
If there is a specific card combination that you do not see listed in the price book,
please contact your sales representative for information on special orders.
COMING Q4 2017!
Contact your Customer Care or Sales
representative for details.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
28
CREDENTIALS
Pricing/product description subject to change without notice.
Smart Credentials
Schlage Mobile Credentials
• Formerly aptiQmobile credentials. Part numbers and products remain the same and retain the same compatibility.
Uses 13.56 MHz smart technology via near field communication (NFC)
For a list of compatible phones, visit aptiQmobile.com
For a list of available bit formats, contact your sales representative.
• Standardized discount structure to align with electronic credentials (Minimum order is 25)
9100* Schlage Mobile Credential $9.00
Schlage Smart Credentials using MIFARE Classic®
• Formerly aptiQ Smart Credentials. Part numbers and products remain
the same and retain the same compatibility.
• 13.56 MHz smart technology
• Uses MIFARE Technology
• Meets ISO standard 14443A (Minimum order is 100)
9420 Schlage MIFARE Classic Smart Card 2.5k bit Clamshell $4.30
9451 Schlage MIFARE Classic Smart Card 1K byte/8k bit Clamshell $6.60
9520 Schlage MIFARE Classic Smart Card 2.5k bit ISO Glossy White $5.30
9551 Schlage MIFARE Classic Smart Card 1K byte/8k bit ISO Glossy White $6.50
9558 Schlage MIFARE Classic Smart Card 4K byte/32k bit ISO Glossy White $9.10
9520M1 Schlage MIFARE Classic Smart Card 2.5k bit with Magnetic Stripe ISO Glossy White $5.90
9551M1 Schlage MIFARE Classic Smart Card 1K byte/8k bit and Magnetic Stripe ISO Glossy White $7.10
9558M1 Schlage MIFARE Classic Smart Card 4K byte/32k bit and Magnetic Stripe ISO Glossy White $9.80
9651 Schlage MIFARE Classic Smart 1K byte/8k bit Keyfob (minimum order is 50) $7.40
9651T Schlage MIFARE Classic Smart 1K byte/8k bit Thin Keyfob (minimum order is 50) $7.60
9751* Schlage MIFARE Classic Smart 1K byte/8k bit PVC Adhesive Patch $6.70
9758* Schlage MIFARE Classic Smart 4K byte/32k bit PVC Adhesive Patch $10.00
Multi-Technology: Proximity and Schlage Smart Credentials using MIFARE Classic®(Minimum order is 100)
9691T Proximity and Schlage Smart Combo 1K byte/8k bit Thin Keyfob (minimum order is 50) $9.95
9951* Proximity and Schlage Smart Card Combo 1K byte/8k bit ISO Glossy White $8.90
9958* Proximity and Schlage Smart Card Combo 4K byte/32k bit ISO Glossy White $10.60
9951M1* Proximity and Schlage Smart Card Combo 1K byte/8k bit with Magnetic Stripe ISO Glossy White $9.20
9958M1 * Proximity and Schlage Smart Card Combo 4K byte/32k bit with Magnetic Stripe ISO Glossy White $11.00
* Lead Time: 4-6 weeks
iButton Keyfobs using MIFARE Classic® Technology (Minimum order is 50)
IBF-151 Combo Keyfob, 13.56 MHz MIFARE Classic (1K byte/8k bit) and iButton (minimum order is 50) $16.30
IBWB-151 Combo Keyfob, 13.56 MHz MIFARE Classic (1K byte/8k bit) without iButton (minimum order is 50) $9.40
Schlage Wristbands Using MIFARE Classic® Technology (Minimum order is 100)
9351-XXX Schlage MIFARE Classic 1K byte/8k bit Silicone Wristband (minimum order is 100)
Available in eleven colors
$9.60
BLK = Black
PLE = Purple
GRN = Green
LME = Lime
BLU = Blue
CYN = Light Blue
YEL = Yellow
WHI = White
PNK = Pink
ONG = Orange
RED = Red
Custom Artwork and Laser Engraving is available for all ISO and Clamshell cards.
Contact Inside Sales at 855-248-0302 or ElectronicInsideSales@allegion.com for more information.
If there is a specific card combination that you do not see listed in the price book,
please contact your sales representative for information on special orders.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 29
CREDENTIALS
Pricing/product description subject to change without notice.
Proximity Credentials
Allegion, the Allegion logo, and XceedID are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other
countries. All other trademarks are the property of their respective owners.
HID and Indala are both ® resistered.
Schlage Proximity Credentials
Formerly XceedID proximity credentials. Part numbers and products remain the same and retain the same compatibility.
• 125 kHz proximity technology
• Compatible with most HID Proximity formats up to 37 bits
• Compatible with most HID readers (Minimum order is 100)
7410 Proximity Card Clamshell $3.35
7510 Proximity Card ISO Glossy White $5.75
7510M1 Proximity and Magnetic Stripe Card ISO Glossy White $6.40
7610 Proximity Keyfob (minimum order is 50) $5.90
7610T Proximity Thin Keyfob (minimum order is 50) $6.30
7010 Proximity PVC Adhesive Disk (35 mm Disk) (minimum order is 50) $5.40
IBF-110 Combo Keyfob, 125 kHz Proximity and iButton (minimum order is 50) $13.35
IBWB-110 Combo Keyfob, 125 kHz Proximity without iButton (minimum order 50) $7.05
Proximity Credentials Comparison Guide
Schlage Product Number HID Product Number
125 kHz Proximity Cards
7410 1326
7510M1 1336/1536
7610 1346
7510 1386/1586
7010 1391
Please Note:
This chart offers comparable part numbers, these are not direct
replacements. Please use this chart as a guide and reference the spec sheet for the
part specified to determine compatibility.
Custom Artwork and Laser Engraving is available for all ISO and Clamshell cards.
Contact Inside Sales at 855-248-0302 or ElectronicInsideSales@allegion.com for more information.
If there is a specific card combination that you do not see listed in the price book, please contact your sales
representative for information on special orders.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
30
CREDENTIALS
Pricing/product description subject to change without notice.
Credentials - Other
Proximity Credentials (37 bit, Facility Code 1462)
PRX1 Proximity Card - .075" thick Clamshell $5.20
PRX3 Proximity Card - Credit card size and .033" thick ISO Glossy White $8.30
PRX4 Proximity Card - Dual Technologies - Magnetic Stripe and Prox .033" thick $9.40
PRX5 Proximity PVC Adhesive Disk, .042” thick $9.40
PF1 Proximity Keyfob $9.40
100-pack Proximity Credentials (37 bit, Facility Code 1462)
PRX1-100 Proximity Card - .075" thick Clamshell $338.00
PRX3-100 Proximity Card - Credit card size and .033" thick ISO Glossy White $575.00
PRX4-100 Proximity Card - Dual Technologies - Magnetic Stripe and Prox .033" thick $640.00
PRX5-100 Proximity PVC Adhesive Disk, .042" thick $541.00
PF1-100 Proximity Keyfob $593.00
Magnetic Stripe Credentials
MAG1 Magnetic Stripe Card - not encoded, no logo. (minimum order is 100) $2.70
MAG2 Magnetic Stripe Card - Encoded (track 2 and track 3) with Schlage Logo. (minimum order is 100) $3.60
MAG3 Magnetic Stripe Card - Encoded, no printing. Must have an enrollment reader to use this credential. (minimum order is 100) $3.60
iButton Credentials
IBA iButton (Adhesive Back) $7.40
IBF iButton on Fob - Black $11.40
IBF -100 100 pack - iButton on keyfob - black $932.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17 31
CREDENTIALS
Pricing/product description subject to change without notice.
Slot Punch Options
Slot Punch Options
SPV Vertical Slot Punch for ISO Cards (not available for magnetic stripe cards)
MUST BE ORDERED WITH CARDS.
$0.42 per card
SPH Horizontal Slot Punch for ISO Cards, including those with Magnetic Stripe
MUST BE ORDERED WITH CARDS.
$0.42 per card
Price Book 5
Effective August 12, 2017 • Rev. 08/17
32
CREDENTIALS
Pricing/product description subject to change without notice.
Notes
Price Book 5
Effective August 12, 2017 • Rev. 08/17 33
NETWORKED READERS
Pricing/product description subject to change without notice.
Table of Contents
NETWORKED READERS - TABLE OF CONTENTS
Readers Overview 34
How to Order 35
Readers 36
Multi-Technology Readers 36
Multi-Technology Magnetic Stripe Readers 36
Smart Card Readers 36
Proximity Readers 36
Reader Parts
Reader Replacement Parts 37
Reader Covers 37
Enrollment Readers 38
Readers and Keypads - Other
Magnetic Stripe Readers 39
Enrollment Readers for Schlage Express 39
iButton Readers 39
Scramble Keypads 40
Electronic Keypads 40
Ofine Keypads 40
CONTACT INFORMATION FOR SCHLAGE READERS AND CREDENTIALS
Email Order To: Readers.Credentials.Orders@allegion.com
Fax Order To: 866-954-1779
Payment Address: XceedID Corporation
15934 Collections Center Drive
Chicago, IL 60693
For Credentials Warranty Information please see page 11.
877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective
Products, General Sales Questions
Technical Questions/Issues, Returns of
Defective Products, Repairs
Email Requests to: Sales Support contact
information on Page 2.
Contact For Technical Assistance:
Readers_Credentials_Biometrics_TechProdSupport@allegion.com
Inside Sales 855-248-0302
General Sales Questions, Pre-printed cards, CardTrax Accounts
ElectronicInsideSales@allegion.com
Special Note: As of September 2017, all aptiQ
and XceedID readers will transition to the Schlage
brand. Although the brand name has changed,
all part numbers and products remain the same.
Forward and backward compatibility does not
change and products may be used interchangeably.
Please see chart on page 36 for transition details.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
34
NETWORKED READERS
Pricing/product description subject to change without notice.
Readers Overview
With our versatile multi-technology, smart and proximity reader options, we have a solution for any physical access control need. Our
comprehensive, yet simple reader line-up is suitable for any new smart or proximity installation.
Schlage Multi-Technology Readers
Schlage multi-technology readers are ideal for any new smart, proximity, or
magnetic stripe installation—or as a cost effective way to migrate from existing
magnetic stripe or proximity to smart technology.
125 kHz proximity and 13.56 MHz contactless smart card technology in one
reader
Magnetic stripe option, reads track 2 default, tracks 1 and 3 congurable
Reads ISO 14443 A/B and 15693 credentials
Compatible with:
- Schlage smart credentials using MIFARE Classic®, MIFARE Plus® and MIFARE® DESFire® EV1
- Schlage mobile credentials using NFC technology
- Most popular proximity credentials including Schlage, XceedID, HID®, GE/Casi ProxLite®, AWID®, and LenelProx®
- CSN of most existing 13.56 MHz credentials
- Magnetic stripe
• Wiegand interface (RS-485 available)
• FIPS 201-1 compliant
• Tri-state LED (red, green, amber) and audible status alert
• Standard color is black. Gray, brown and cream colors are available, longer lead times may apply.
Schlage Smart Readers
The Schlage smart mini-mullion reader is an excellent option for a smart-only installation.
• 13.56 MHz single frequency contactless smart card technology
• Reads ISO 14443 A/B and 15693 credentials
• Compatible with:
- Schlage smart credentials using MIFARE Classic®, MIFARE Plus® and MIFARE® DESFire® EV1
- Schlage mobile credentials using NFC technology
- CSN of most existing 13.56 MHz credentials
• Wiegand interface
• FIPS 201-1 compliant
• Tri-state LED (red, green, amber) and audible status alert
• Standard color is black. Gray, brown and cream colors are available, longer lead times may apply.
Schlage Proximity Readers
This mini-mullion reader is a great solution for proximity-only facilities.
• 125 kHz single frequency proximity technology
• Compatible with:
- Most popular proximity credentials including Schlage, XceedID, HID®, GE/Casi ProxLite®, AWID®, and LenelProx®
• Tri-state LED (red, green, amber) and audible status alert
• Wiegand interface
• Standard color is black. Gray, brown, and cream colors are available, longer lead times may apply.
Allegion, the Allegion logo, and Schlage are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other
countries. All other trademarks are the property of their respective owners.
Special Note: As of September 2017, all aptiQ
and XceedID readers will transition to the Schlage
brand. Although the brand name has changed,
all part numbers and products remain the same.
Forward and backward compatibility does not
change and products may be used interchangeably.
Please see chart on page 36 for transition details.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 35
NETWORKED READERS
Pricing/product description subject to change without notice.
How To Order
How to Order:
Follow the steps below to build the full part number for the reader you wish to order. Use the sample below to determine how to write
your part number on your PO.
1. Choose Your Reader Model
See page 34 for available models.
2. RS-485 Capability
Schlage readers (multi-technology only) have been designed with an option to interface directly with controllers that utilize RS-485 protocol.
RS-485 is a communication protocol that allows a two way communication between the reader and the panel, for example OSDP protocol.
To order readers with RS-485 capability, add “-485” after the reader model number. If you are using the standard Wiegand
protocol, do not add a sufx (leave blank).
3. Reader Color Options
Schlage Readers are available in four color options. Add the appropriate sufx after the reader model number and RS-485 option (if
applicable).
Black (standard) – do not add a color sufx, leave blank
Cream – add “C”
Warm Tone Brown – add “BN”
Cool Tone Gray – add “G”
If the RS-485 option is chosen, add the color sufx after “-485.” If the RS-485 option is not chosen, add the color sufx after the reader
part number (ex: MT11BN).
4. PIV Format
75-bit PIV is the default format for all Schlage readers. Other format requirements are determined by the access control system, agency
requirements, and customer specications. The other available formatting options are listed below. Add “PIV” and the format number after
the reader model number, RS-485 option (if applicable), and color sufx (if applicable).
If you need assistance in determining the PIV format for your facility, please contact your Allegion sales representative directly.
5. Special Instructions
Please specify any other special instructions directly on your PO.
1. Reader Model Number
2. RS-485
(optional – Multi-Tech Readers Only)
3. Color Option
Black (standard) – leave blank
Cream – add “C”
Warm Tone Brown – add “BN”
Cool Tone Gray – add “G”
4. PIV Format
(optional; see chart below for formats)
MTK15 – 485 – CPIV8
Format Number Bit Information
1 75-bit PIV
2 58-bit TWIC/CAC
3 200-bit FASC-N
4 64-bit (BCD) TWIC/CAC
5 83-bit TWIC/CAC
6 66-bit (58-bit format +TSM) TWIC/CAC
7 64-bit (58-bit format (no parity) + TSM) TWIC/CAC
8 91-bit (83 bit format + TSM) TWIC/CAC
9 40–bit BCD
10 40-bit reversed BCD
11 64-bit BCD
12 64-bit reversed BCD
13 128-bit BCD
14 128-bit reversed BCD
15 58-bit HSE
Sample Part Number:
Price Book 5
Effective August 12, 2017 • Rev. 08/17
36
NETWORKED READERS
Pricing/product description subject to change without notice.
Schlage Multi-Technology Readers
• Formerly aptiQ Multi-Technology and Smart Readers. Part numbers and products remain the same and retain the same compatibility.
MT11 Multi-Technology Reader – Mullion Mount
Dimensions: 5.91" x 1.72" x 0.81". Power required: 5-16 VDC
$327.00
MT15 Multi-Technology Reader – Wall Mount
Dimensions: 5.1" x 3.25" x 0.76". Power required: 5-16 VDC
$327.00
MTK15 Multi-Technology Reader – Wall Mount with Keypad
Dimensions: 5.1" x 3.25" x 0.76". Power required: 5-16 VDC
$523.00
For RS-485 capability add -485 to part number.
Schlage Multi-Technology Magnetic Stripe Readers
MTMS15 Multi-Technology Magnetic Stripe Reader – Wall Mount
Dimensions: 4.43" x 5.17" x 1.15". Power required: 5-16 VDC
$592.00
MTMSK15 Multi-Technology Magnetic Stripe Reader – Wall Mount with Keypad
Dimensions: 4.43" x 5.17" x 1.15". Power required: 5-16 VDC
$799.00
For RS-485 capability add -485 to part number.
Schlage Contactless Smart Card Readers
SM10 Schlage Contactless Smart Card Reader – Mini-Mullion Mount
Dimensions: 4.26" x 1.72" x 0.81". Power required: 5-16 VDC
$159.00
Schlage Proximity Readers
• Formerly XceedID Proximity Readers. Part number and product remains the same and retains the same compatibility.
PR10 Proximity Reader – Mini-Mullion Mount
Dimensions: 4.26" x 1.72" x 0.81". Power required: 5-16 VDC
$159.00
Readers
MT11 MT15 MTK15
MTMSK15
MTMS15
SM10
PR10
Special Note: As of September 2017, all aptiQ and XceedID readers will transition to the Schlage brand.
Although the brand name has changed, all part numbers and product remain the same. Forward and backward
compatibility does not change and products may be used interchangeably.
Reader Transition Guide
Old Brand New Brand Part # (no change) Product Description (no change)
XceedID Schlage PR10 Mini-mullion proximity
aptiQ Schlage SM10 Mini-mullion smart
aptiQ Schlage MT11 Mullion Multi-technology
aptiQ Schlage MT15 Single gang multi-technology
aptiQ Schlage MTK15 Single gang multi-technology with keypad
aptiQ Schlage MTMS15 Single gang multi-technology with magnetic stripe
aptiQ Schlage MTMSK15 Single gang multi-technology with magnetic stripe
and keypad
Price Book 5
Effective August 12, 2017 • Rev. 08/17 37
NETWORKED READERS
Pricing/product description subject to change without notice.
Reader Parts
Reader Replacement Parts
23846462 Pigtail – 18 inch $41.50
23933104 Screw pack $11.90
21074009 Magnetic Stripe Read Head $119.00
23846355 Mini-Mullion Backplate $23.60
23846439 Single Gang Backplate $23.60
23846397 Mullion Backplate $23.60
24152654 Magnetic Stripe Backplate $47.40
CP-11 Cosmetic Backplate Cover – Mini Mullion /Mullion (6.70" x 2.50") $29.60
CP-15 Cosmetic Backplate Cover – Single Gang (5.65" x 3.85") $29.60
CP-21 Cosmetic Backplate Cover – Mid-Range (6.45" x 5.50") $29.60
Reader Covers
• Standard color for readers is black. Gray, brown and cream colors are available, longer lead times may apply.
23846520 Mini-Mullion – Black $23.60
23846546 Mini-Mullion – Warm-Tone Brown $23.60
23846538 Mini-Mullion – Cool-Tone Gray $23.60
23920648 Mini-Mullion – Cream $23.60
23846553 Mullion – Black $23.60
23846579 Mullion – Warm-Tone Brown $23.60
23846561 Mullion – Cool-Tone Gray $23.60
23920655 Mullion – Cream $23.60
23846587 Single Gang – Black $23.60
23846603 Single Gang – Warm-Tone Brown $23.60
23846595 Single Gang – Cool-Tone Gray $23.60
23920598 Single Gang – Cream $23.60
23846611 Single Gang with Keypad – Black $23.60
23846637 Single Gang with Keypad – Warm-Tone Brown $23.60
23846629 Single Gang with Keypad – Cool-Tone Gray $23.60
23920606 Single Gang with Keypad – Cream $23.60
24064149 Magnetic Stripe – Black $47.40
24064156 Magnetic Stripe – Warm-Tone Brown $47.40
24064172 Magnetic Stripe – Cool-Tone Gray $47.40
24064164 Magnetic Stripe – Cream $47.40
24064198 Magnetic Stripe with Keypad – Black $47.40
24064206 Magnetic Stripe with Keypad – Warm-Tone Brown $47.40
24064222 Magnetic Stripe with Keypad – Gray $47.40
24064214 Magnetic Stripe with Keypad – Cream $47.40
Price Book 5
Effective August 12, 2017 • Rev. 08/17
38
NETWORKED READERS
Pricing/product description subject to change without notice.
Enrollment Readers
Enrollment Readers
MT20 USB/MIFARE/EV1 Enrollment Reader $547.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17 39
NETWORKED READERS
Pricing/product description subject to change without notice.
Readers - Other
Magnetic Stripe Readers
SMR5 Magnetic Stripe Card Reader
Weatherized for outdoor use with a cast metal housing and optional wall plate. The SMR5 has one LED.
Standard color is black, also available in Beige. Standard is 5 VDC. Must specify for 12 VDC.
$420.00
SMR10 Magnetic Stripe Card Reader
Weatherized for outdoor use with a cast metal housing and optional wall plate. The SMRID has two LED’s.
Standard color is black, also available in Beige. Standard is 5 VDC. Must specify for 12 VDC.
$563.00
SMR20 Magnetic Stripe Card Reader with Keypad
Weatherized for outdoor use with a cast metal housing and optional wall plate. The SMR20 has integrated
membrane keypad. AVAILABLE IN BEIGE ONLY. Standard is 5 VDC. Must specify for 12 VDC.
$818.00
SWP10 Wall Plate for Mercury Magnetic Stripe Card Reader
Metal Wall Plate (Beige or Black) for MR5, MR10 and MR20 magnetic card readers.
$24.10
SWS10 Weather Shield for SMR5, SMR10 and SMR20 Readers
Brushed Stainless vertical mount.
$92.00
Enrollment Readers for Schlage Express
CRM2 Magstripe Enrollment Reader for Schlage Express $646.00
CRP2 Proximity Enrollment Reader for Schlage Express $521.00
iButton Readers
SRT-100 iButton Mullion Mount Reader
The SRT100 iButton Mullion-Mount Reader provides solid construction with a 1/4" thick brushed anodized
aluminum face plate and stainless steel read head. Bi-color LED and Sonalert provide users with both visual
and audible indicators. 26 bit Wiegand output.
$849.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17
40
NETWORKED READERS
Pricing/product description subject to change without notice.
Keypads
Scramble Keypads
SERIII-W-GR Scramble Keypad (Gray)
The keypad is designed to prevent onlookers from detecting the code being entered. Each key is lighted by an
LED with a different set of numbers every time the keypad is used. Weatherized for outdoor applications with a
Wiegand output. Power requirements: 8-14 VDC. Standard color is gray. Also available in black (SERIII-W-BLK).
$2,032.00
SMK-2-GR Scramble Keypad Surface Mount Kit (Gray)
Surface Mount Kit and tamper proof screws. Standard color is gray. Also available in black (SMK-2-BLK).
$265.00
SSMK-2-ADA Scramble Keypad Surface Mount Kit (ADA Compliant)
Surface Mount Kit and tamper proof screws. ADA compliant.
$509.00
PMK-2-GR Panel Mount Kit (Gray)
Standard color is gray. Also available in black (PMK-2-BLK).
$214.00
SPMK-2-GR Panel Mount Kit w/ Steel Back Box (Gray)
Steel back box with tamper proof screws.
Standard color is gray. Also available in black (SPMK-2-BLK).
$232.00
Note:: Mounting Kits are sold separately and required for usage with Scramble Keypads.
Electronic Keypads
SEKPDMWG Electronic Keypad (Mullion Mount)
Stainless faceplate with keypad. Weatherized for outdoor use - 2x6 Matrix (5 or 12 VDC)
Wiegand output.
$534.00
SEKPDWG Electronic Keypad
Stainless faceplate with keypad. Weatherized for outdoor use - 3x4 Matrix (5 or 12 VDC)
Wiegand output.
$775.00
SEKPD8B Electronic Keypad
Stainless faceplate with keypad. Weatherized for outdoor use - 3x4 Matrix (5 or 12 VDC)
Wiegand output, 8 bit word.
$758.00
Offline Keypads
KP232 Mullion-mount Keypad
Mullion style, back lighted hard plastic keys, weather resistant; indoor/outdoor, doorbell key,
main relay and three independent outputs, secured installation, aluminum nish.
$791.00
KP212 Mullion-mount Keypad
Back lighted hard plastic keys, weather resistant; indoor/outdoor, doorbell key and relay,
secured installation, aluminum nish.
$688.00
KP2000E Flush-mount Backlit Access Control Keypad
Indoor/outdoor design, single gang, illuminated backlit keys, and sounder, Wiegand and Secured
Series outputs, for stand-alone applications, 5 year warranty.
$452.00
KP2000EM Flush-mount Durable Metal Access Control Keypad
Indoor/outdoor single gang, durable metal trim, heavy duty metal keys with Braille, and sounder,
Wiegand and Secured Series outputs, for stand-alone applications, 5 year warranty.
$630.00
41
LE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Table of Contents
877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective
Products, General Sales Questions
Technical Questions/Issues, Returns of
Defective Products, Repairs
Email Orders To:
Order_Entry_Schlage_Commercial@allegion.com
Contact For Technical Assistance:
Electronic_Lock_TechProdSupport@allegion.com
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
612 (US 10) Satin Bronze
619 (US 15) Satin Nickel
622 (US19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chrome
626AM Antimicrobial Coating
on Satin Chromium
643e (US 11) Aged Bronze
CONTACT INFORMATION FOR LE SERIES LOCKS & DEVICES
Payment Address: Schlage Electronic Security
15934 Collections Center Drive
Chicago, IL 60693
COMING Q1 2017!
Contact your Customer Care or Sales
representative for details.
LE Series with ENGAGE Technology - TABLE OF CONTENTS
Finish Codes and Descriptions 41
Exploded View 42
How to Order 43
Standard Features 44
LE Functions 45
Lever Designs 46
Lever Suiting 48
Cylinder Compatibility 49
Ordering Guide 51
LE Series Greenwich Sectional 52
LE Series Addision 54
LE Series Parts 56
Price Book 5
Effective August 12, 2017 • Rev. 08/17
42
LE Series
Pricing/product description subject to change without notice.
GRADE 1 MORTISE LEVERED LOCK
Outside lever
and rose
Mounting
posts
Key
Cylinder
Compression
ring spring
Outside trim
Spring
cage
Lever
spindle
Lock Case
Armor
plate
Armor
screw
Strike
screw
Lock case
mounting screw
Strike
Strike box with
magnet tray
(MS and MB only)
DPS (MD only)
Inside
trim
Battery
cover
Battery
holder
Spring
cage
Mounting
plate
Lever
spindle
Rose
Inside lever
and bushing
Strike box
(MD only)
LE Series
43
LE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
LE Series - How to Order
How to Order: REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS
LE -MS -GRW -P-03 -626 -00A - - 612 -–-LH -10-136 -134 -S123 - –
1. Series:
2. Chassis/Function:
MS Mortise with LED indicator
MB Mortise with push button and LED
MD Mortise Deadbolt with LED
3. Style:
GRW Greenwich sectional with rose
ADD Addison escutcheon
4. Cylinder Type:
P Mortise cylinder, Schlage 6-pin
For all options see LE ordering pages
5. Outside Lever:*
03 Suites with Tubular style
LAT Latitude
For all options see LE ordering pages
*To add tactile warning, use prefix 8. Example: 803
6. Outside Finish:
626 Satin Chrome
605 Bright Brass
606 Satin Brass
612 Satin Bronze
619 Satin Nickel
622 Matte Black
625 Bright Chrome
643e Aged Bronze
626AM Satin Chrome (Antimicrobial Coating)
7. Outside Rose: Specify only for Greenwich Trim
00A 2-1/8" (54 mm) diameter (Standard)
00B 2-9/16" (65 mm) diameter
00C 2-5/8" (66 mm) diameter with bevel
AVA Decorative rose 2-5/8" (66 mm) diameter, supports ACC lever only
MER Decorative rose 2-5/8" (66 mm) diameter, supports MER lever only
8. Inside Lever: Specify only if different from outside lever
3 Suites with Tubular style
LAT Latitude
For all options see LE ordering pages
9. Inside Finish: Specify only if different from outside finish
See options under 6 above
10. Inside Rose: Specify only for Greenwich Trim and only if different from Outside Rose
See options under 7 above
11. Handing:
RH Right Handed (Standard)
LH Left Handed
RHR Right Handed Reverse
LHR Left Handed Reverse
12. Strike Plate Lip Length:
10-136 1-3/16" lip length (Standard for MS/MB)
10-136-112 1-1/2" lip length
For all options see LE ordering pages
13. Door Thickness
134 1-3/4" (Standard)
Options available up to 2-1/4" thickness - see LE ordering pages
14. Keyway Type
S123 Everest 29 S (Standard)
For all options see LE ordering pages
15. Additional Options
Price Book 5
Effective August 12, 2017 • Rev. 08/17
44
LE Series
Pricing/product description subject to change without notice.
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾"
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X” and are not subject to standard discounting.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest B, D, 29R, and 29T, also, Quad, Numbered, and Reversed) add $16.00. This does not apply to
Primus cylinders. See Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA (keyed alike), KD (keyed
different) and 0-bitted product and S145 for factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with "C" keyway and KD or 0-bitted will receive 6-pin cylinders (keyed 5) with 5-pin keys.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered
as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
Standard Features
Certification ANSI/BHMA Certified A156.25-2013 (Indoor/Outdoor), ANSI/BHMA Certified
A156.13-2012, Series 1000, Grade 1
UL 294, ULC S319, UL 10C 3-hour rated
Case Size 4-7/16" x 6-1/16" x 1"
Armor Front 1-1/4" x 8"
Deadbolt 1" throw stainless steel
Latchbolt 3/4" throw stainless steel with anti-friction tongue
Strike 1-1/4" x 4-7/8", square corner, 1-3/16" lip with box and DPS
Backset 2-3/4"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1-3/4" door thickness standard (can be ordered to accommodate doors 1-3/4" to 2-1/4" thick)
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
How to Order
Price Book 5
Effective August 12, 2017 • Rev. 08/17 45
LE Series
Pricing/product description subject to change without notice.
LE Series Wireless Lock Functions
Function Addison Escutcheon Shown
MS - Mortise with LED Indicator
Storeroom
Lockset is normally secure. Inside lever always allows free egress.
Valid toggle credentials on the exterior may be used to change to
a passage or secured status. A mechanical key will momentarily unlock
the door.
MB - Mortise with Interior Push Button and LED
Ofce
Lockset is normally secure. Inside lever always allows free egress. Interior
pushbutton on inside housing may be used to select a passage or secured
status. Meets need for lockdown function for safety and security.
NOTE: Valid toggle credentials on the exterior may also be used to change status.
Has interior pushbutton (IPB).
Privacy
Lockset is normally secure. Inside lever always allows free egress. Interior
pushbutton on inside housing may be used to select a privacy status. The
interior pushbutton will disable normal electronic access from the exterior.
Opening the door or pressing the interior pushbutton a second time on the
inside housing deactivates the privacy status. Has interior pushbutton (IPB).
Apartment
Lockset is normally secure. Inside lever always allows free egress. Interior
pushbutton on inside housing may be used to select a passage or secured
status. Opening the door or pressing the interior pushbutton causes the
lockset to toggle unsecured. While toggled unsecured, the lockset can only
be secured while the door is closed by pressing the interior pushbutton or
using a normal credential on the exterior. Normal electronic access from the
exterior is always allowed. Has interior pushbutton (IPB).
MD - Mortise Deadbolt with LED
Privacy
Lockset is normally secure from exterior. Inside lever always allows free
egress (if deadbolt is extended, inside knob/lever will simultaneously retract
latchbolt and deadbolt). The deadbolt may be used to select a privacy
status. With deadbolt extended, normal electronic access from the exterior
will be disabled. Opening the door or retracting deadbolt deactivates the
privacy status.
Apartment
Lockset is normally secure from exterior. Inside lever always allows free
egress (if deadbolt is extended, inside knob/lever will simultaneously retract
latchbolt and deadbolt). The deadbolt may be used to select a passage
or secured status. Opening the door or retracting the deadbolt causes the
lockset to toggle unsecured. While toggled unsecured, the lockset can only
be secured while the door is closed by extending the deadbolt from inside
or using a normal credential on the exterior reader. Normal electronic access
from the exterior is always allowed.
LED
Handing
RH Right Handed: Hinges on Right Opens Inward
LH Left Handed: Hinges on left Opens Inward
RHR Right Handed Reverse: Hinges on Right Opens Outward
LHR Left Handed Reverse: Hinges on Left Opens Outward
46
LE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Forged Lever Designs
01
00A 00B 00C (not available in
612 nish)
Wrought Rose Designs
06 Rhodes
18
Accent (ACC)
02
07 Athens
Latitude (LAT)
Asti (AST)
03 Tubular
AVA (ACC lever only) MER (MER lever only)
12
Longitude (LON)
Merano (MER)
41
05
17 Sparta
Omega(OME)
42
2 1/8” (54 mm) diameter 2 9/16” (65mm) diameter 2 5/8” (66mm) diameter 2 5/8” (66mm) diameter 2 5/8” (66mm) diameter
2¹¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"4³⁄₄"
2¹³⁄₁₆"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2
⁹⁄₃₂
"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
4⁵⁄₈"
2¹¹⁄₁₆"
2¹⁄₃₂"
4⁷⁄₈"
2
⁹⁄₁₆
"
4³⁄₄"
2"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4⁷⁄₈"
¹⁄₂"³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
2¹⁄₄"
2³⁄₄"
2¹⁄₈"
2³⁄₄"
Ispecify hand
Not available with C Rose
Ispecify hand Ispecify hand Ispecify hand
LE Series Standard Lever Collection
Price Book 5
Effective August 12, 2017 • Rev. 08/17 47
LE Series
Pricing/product description subject to change without notice.
Forged Lever Designs
Wrought Escutcheon Design Tactile Options
M51
4.5”
3.2”
2.4”
4.5"
2.4"
3.2"
M54
4.35”
2.3”
2.75”
2.14”
4.35”
2.3”
2.75”
2.14”
M52
4.5”
3”
2.2”
4.5"
2.2"
3"
M55
4.3”
3”
2.14”
4.3”
3”
2.14”
M53
3.2”
2.6”
4.35”
3.2”
2.6”
4.35”
M56
2.4” 4.6”
3”
2.1”
2.4” 4.6”
3”
2.1”
M82
2.2” 4.8”
2.9”
0.4”
2.2” 4.8”
2.9”
0.4”
M61
4.5”
3.2”
2.1”
4.5”
3.2”
2.1”
Ispecify hand
M85
4.9”
3.3”
0.3”
4.9”
3.3”
0.3”
Ispecify hand
M83
4.6”
2.9”
0.4”
4.6”
2.9”
0.4”
M84
5.1”
3”
0.4”
5.1”
3”
0.4”
M63
4.5”
3.2”
2.1”
4.5”
3.2”
2.1”
M81
4.8”
0.4”
2.9”
2.1”
4.8”
0.4”
2.9”
2.1”
Ispecify hand
LE Series M Lever Collection
06 lever shown
(See LE ordering pages for availability)
Price Book 5
Effective August 12, 2017 • Rev. 08/17
48
LE Series
Pricing/product description subject to change without notice.
Commercial Lever Suiting
Standard Levers
L /LE
Mortise
LT
Tubular
ND /NDE
Cylindrical
AD/CO
Series
AL
Cylindrical
S
Tubular
33A/35A, 94/95, 98/99
Exit Devices
(Von Duprin)
01 01 01
02 02 02
03 03 Tubular* Tubular 03
05 05 05
06 06 Rhodes Rhodes Saturn Saturn 06
07 07 Athens Athens Jupiter Jupiter 07
12 12 12
17 17 Sparta Sparta Neptune Neptune 17
18 18 18
Latitude Latitude Latitude
Longitude Longitude Longitude
Omega Omega Omega* Omega 16
Asti Asti Flair Asti
Merano Merano Merano
Accent Accent Accent
* Not available on NDE Series locks.
M Collection Levers
L /LE
Mortise
LT
Tubular
33A/35A, 94/95, 98/99
Exit Devices
(Von Duprin)
M51 M51 M51
M52 M52 M52
M53 M53 M53
M54 M54 M54
M55 M55 M55
M56 M56 M56
M57* M57 M57
M61 M61 M61
M62* M62 M62
M63 M63 M63
M81 M81 M81
M82 M82 M82
M83 M83 M83
M84 M84 M84
M85 M85 M85
* Not available on LE Series locks.
LE Series Lever Suiting
49
LE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Cylinder and Length Requirements, LE-Series
Cylinder
Type Cylinder
Door Thickness
(+/- 1/8")
1-3/4" 2" 2-1/4"
Mortise Cylinder 30-021* 1-1/4" (114), 1-3/8" (138),
1-1/2" (112)
1-3/8" (138), 1-1/2" (112),
1-5/8" (158)
1-1/2" (112), 1-5/8" (158),
1-3/4" (134)
FSIC 30-016** 1-1/2" (112)
SFIC 80-108** 1-3/8" (138) N/A
* 112 Standard length will ship with lock
**Product is LESS CORE, see page 58 for pricing
Notes
1. Cylinders include compression spring
2. Assumes EE (equally extended)
3. Door thickness range supported: minimum 1-5/8" to maximum 2-3/8"
4. Supports all functions (MS, MB, and MD) for both ADD and GRW
Cylinder
P
With mortise cylinder
Schlage Everest 29 S123
6-Pin
Keyed different as standard with two keys
For master keying, additional charge applies
Specify line item 50-210 per master-keyed lock
Z
With mortise cylinder
Schlage Everest SL
7-pin - factory master keyed only
LLess mortise cylinder
R
With cylinder
Schlage Everest 29 S123
6-Pin Full Size Interchangeable Core (FSIC)
Keyway one bitted as standard with two keys
J
Less cylinder
Schlage
6-Pin Full Size Interchangeable Core (FSIC)
TT Construction core
Full Size Interchangeable Core (FSIC)
GD
With cylinder
Schlage Everest 29 R
7-Pin Small Format Interchangeable Core (SFIC)
Factory master keyed with two keys as standard, master keying must be specied
BD
Less cylinder
Schlage, Falcon, Competitive OEM's
7-Pin Small Format Interchangeable Core (SFIC)
HD
Construction core
Small Format Interchangeable core (SFIC)
A non-refundable handling charge applies
BDC Disposable core
Small Format Interchangeable core (SFIC)
Notes: 1. For P, R, Z and GD, master keyed cylinders can be specified and will be shipped in lock packaging.
2. For Master Key System Summary form which should accompany the master keyed order, see Electronic Security price book pages 253-263.
3. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
4. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.
LE Series Cylinders
Cylinder with Compression Ring & Spring
Cylinder with
Compression
Ring & Spring
Cylinder with
Compression
Ring & Spring,
Blocking Ring
Cylinder with
Compression
Ring & Spring
Cylinder with
Compression
Ring & Spring,
Blocking Ring
Price Book 5
Effective August 12, 2017 • Rev. 08/17
50
LE Series
Pricing/product description subject to change without notice.
Notes
Price Book 5
Effective August 12, 2017 • Rev. 08/17 51
LE Series
Pricing/product description subject to change without notice.
LE Series Wireless Locks - Ordering Guide
Quantity
1. Series
2. Chassis/Function
3. Style
4. Cylinder
5. Outside Lever
6. Outside Finish
7. Outside Rose1
8. Inside Lever2
9. Inside Finish2
10. Inside Rose1, 2
11. Handing3
12. Strike4
13. Door Thickness5
14. Keyway
15. Options
Ex. 1 LE MS GRW P03 626 00A RH 10-136 1-3/4 S123
Please complete all information above and email order to:
Order_Entry_Schlage_Commercial@allegion.com
1. Applicable only to Greenwich sectional with rose design.
2. Specify only if different from outside.
3. Required if selecting one of the handed lever styles.
4. Strike Plate: 10-072 standard for MD and 10-136 standard for MS/MB if no selection is made.
5. Door Thickness: 1-3/4" standard if no selection is made.
Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact
(Name, Phone, Fax)
Price Book 5
Effective August 12, 2017 • Rev. 08/17
52
LE Series
Pricing/product description subject to change without notice.
LE Series Wireless Lock - Greenwich Mortise/Mortise Deadbolt
4. Select Cylinder Type Note: Maximum door thickness with SFIC Cylinder is 2”, otherwise compatible with 1-3/4” to 2-1/4” doors.
P ÅrMortise cylinder, Schlage 6-Pin (Everest 29 S123 standard)
Also available in formats to support residential customers (5-Pin cylinder with C keyways).
N/C
Z ÅMortise cylinder, Schlage Everest SL, 7-Pin (factory master keyed only) N/C
LLess mortise cylinder DEDUCT $74.00
R ţ FSIC with cylinder, Schlage 6-Pin (Everest 29 S123 standard) $67.00
JLess FSIC, Schlage, 6-Pin N/C
TFSIC construction core $67.00
GD ţ SFIC with cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) $77.00
BD Less SFIC, Schlage, Falcon, competitive OEM's, 7-Pin N/C
HD SFIC construction core $40.00
BDC SFIC disposable N/C
50-231 Construction core handling charge (non-refundable) $9.50
Å Master keyed cylinders will be shipped in lock package. To specify, send Master Keying System Summary form (page 295 of SES price
book) with order or go to kss.allegion.com.
r For master keying, an additional charge of $18.30 each applies. Specify line item 50-210.
£ Control keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
For additional assistance on Master Keying as well as restricted keyways please contact customer service.
5. Select Outside Lever Note: Reference pages 6 and 7 to see style option images.
03 Suites with Tubular style N/C
06 Suites with Rhodes style N/C
07 Suites with Athens style N/C
17 Suites with Sparta style N/C
LAT Latitude N/C
Standard options 01, 02, 05, 12, 18, LON, OME, ACC, AST, MER, 41, and 42 (also 03, 06, 07, 17, and LAT) N/C
M Collection options M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, and M85 $30.00
8xx* Tactile Warning on standard levers available for 01 ,02, 03, 05, 06, 07, 12, 17, and 18 $41.50
8xx* Tactile Warning on M collection levers available for M51, M52, and M81 $71.50
* Ordering instructions: Preface lever design code with 8. Example: 803 for 03, 851 for M51, etc.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
6. Select Outside Finish
626 Satin Chrome N/C
605 Bright Brass $63.00
606 Satin Brass $63.00
612 Satin Bronze (00C rose not available in 612 nish) $63.00
619 Satin Nickel $63.00
622 Matte Black (Conrm availability through Customer Care prior to order.) $63.00
625 Bright Chrome $63.00
643e Aged Bronze $63.00
626AM Satin Chrome Antimicrobial $85.00
7. Select Outside Rose
00A 2-1/8" (54 mm) diameter STANDARD
00B 2-9/16" (65 mm) diameter N/C
00C 2-5/8" (66 mm) diameter with bevel (Not available in 612 nish) N/C
AVA Decorative rose 2-5/8" (66 mm) diameter, supports ACC lever only N/C
MER Decorative rose 2-5/8" (66 mm) diameter, supports MER lever only N/C
Outside
MD - Deadbolt
with LED
MB with interior push
button and LED
MS with LED
1-3. Select Chassis/Function/Style Note: Check with access control software provider to verify function is supported by software.
LEMS-GRW Mortise with LED indicator: Storeroom function $1,185.00
LEMB-GRW Mortise with push button and LED: Privacy, Ofce, Apartment functions $1,215.00
LEMD-GRW Mortise Deadbolt with LED: Privacy, Apartment functions $1,284.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17 53
LE Series
Pricing/product description subject to change without notice.
LE Series Wireless Lock - Greenwich Mortise/Mortise Deadbolt
8. Select Inside Lever Note: Specify only if different from Outside Lever.
Standard options 01, 02, 03, 05, 06, 07, 12, 17, 18, LAT, LON, OME, ACC, AST, MER, 41, and 42 N/C
M Collection options* M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, and M85 $30.00
* $30 price adder for M Collection levers only applies if outside lever is Standard.
9. Select Inside Finish Note: Specify only if different from Outside Finish.
See options in section 6. $63.00-$85.00*
* Upcharge only applies if outside finish is 626 and you are specifying a different inside finish.
10. Select Inside Rose Note: Specify only if different from Outside Rose.
See options in section 7. N/C
11. Select Handing (Field reversible)
RH Right Handed STANDARD
LH Left Handed N/C
RHR Right Handed Reverse N/C
LHR Left Handed Reverse N/C
12. Select Strike Lip Length
10-136 1-3/16" lip length (MS and MB only) STANDARD
10-136-112 1-1/2" lip length (MS and MB only) N/C
10-136-134 1-3/4" lip length (MS and MB only) $27.10
10-072 1-3/16" lip length (MD only) STANDARD
10-072-112 1-1/2" lip length (MD only) N/C
10-072-134 1-3/4" lip length (MD only) $28.50
13. Select Door Thickness
134 1-3/4" STANDARD
200 2" $51.10
214 2-1/4" $51.10
14. Select Keying Type
Open Keyway Families (Mortise cylinder or FSIC)2
S123 Everest 29 S (Key in Lever or FSIC) STANDARD
C/CE/E/EF/F/FG/G Classic Obverse N/C
Restricted Keyway Families (Mortise cylinder or FSIC)1,2,3
29T Everest 29 T $16.00
DEverest D $16.00
29R Everest 29 R (Everest SL) $16.00
BEverest 29 B (Everest SL) $16.00
Classic Restricted Quad, Numbered, Reverse $16.00
Restricted Keyway Families (SFIC)3
29R Everest 29 R N/C
BEverest B N/C
1. Everest Restricted Keyways require a Letter of Authorization submitted with the order. See sample Letter of Authorization, page 297 of SES price
book.
2. Full size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered
separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line item.
3. For restricted keyways please see terms and conditions.
54
LE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
LE Series Wireless Lock - Addison Mortise/Mortise Deadbolt
4. Select Cylinder Type Note: Maximum door thickness with SFIC Cylinder is 2”, otherwise compatible with 1-3/4” to 2-1/4” doors.
P ÅrMortise cylinder, Schlage 6-Pin (Everest 29 S123 standard)
Also available in formats to support residential customers (5-Pin cylinder with C keyways).
N/C
Z ÅMortise cylinder, Schlage 7-Pin (Everest SL standard) (factory master keyed only) N/C
LLess mortise cylinder DEDUCT $109.00
R ţ FSIC with cylinder, Schlage 6-Pin (Everest 29 S123 standard) $67.00
JLess FSIC, Schlage, 6-Pin FSIC N/C
TFSIC construction core $67.00
GD ţ SFIC with cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) $77.00
BD Less SFIC, Schlage, Falcon, competitive OEM's, 7-Pin N/C
HD SFIC construction core $40.00
BDC SFIC disposable N/C
50-231 Construction core handling charge (non-refundable) $9.50
Å Master keyed cylinders will be shipped in lock package. To specify, send Master Keying System Summary form (page 295 of SES price
book) with order or go to kss.allegion.com.
r For master keying, an additional charge of $18.30 each applies. Specify line item 50-210.
£ Control keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
For additional assistance on Master Keying as well as restricted keyways please contact customer service.
1-3. Select Chassis/Function Note: Check with access control software provider to verify function is supported by software.
LEMS-ADD Mortise with LED indicator: Storeroom function $1,225.00
LEMB-ADD Mortise with push button and LED: Privacy, Ofce, Apartment functions $1,255.00
LEMD-ADD Mortise Deadbolt with LED: Privacy, Apartment functions $1,324.00
5. Select Outside Lever* Note: Reference pages 6 and 7 to see style option images.
03 Suites with Tubular style N/C
06 Suites with Rhodes style N/C
07 Suites with Athens style N/C
17 Suites with Sparta style N/C
LAT Latitude N/C
Standard options 01, 02, 05, 12, 18, LON, OME, ACC, AST, MER, 41, and 42 (also 03, 06, 07, 17, and LAT) N/C
M Collection options M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, and M85 $30.00
8xx* Tactile Warning on standard levers available for 01 ,02, 03, 05, 06, 07, 12, 17, and 18 $41.50
8xx* Tactile Warning on M collection levers available for M51, M52, and M81 $71.50
* Ordering instructions: Predface lever design code with 8. Example: 803 for 03, 851 for M51, etc.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
6. Select Outside Finish
626 Satin Chrome N/C
605 Bright Brass $63.00
606 Satin Brass $63.00
612 Satin Bronze $63.00
619 Satin Nickel $63.00
622 Matte Black $63.00
625 Bright Chrome $63.00
643e Aged Bronze $63.00
626AM Satin Chrome Antimicrobial $85.00
7. Select Outside Rose (Not applicable to Addision)
8. Select Inside Lever Note: Specify only if different from Outside Lever.
Standard options 01, 02, 03, 05, 06, 07, 12, 17, 18, LAT, LON, OME, ACC, AST, MER, 41, and 42 N/C
M Collection options* M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, and M85 $30.00
* $30 price adder for M Collection levers only applies if outside lever is Standard.
Outside
MD - Deadbolt
with LED
MS with LED
Indicator
MB with interior push
button and LED
Price Book 5
Effective August 12, 2017 • Rev. 08/17 55
LE Series
Pricing/product description subject to change without notice.
LE Series Wireless Lock - Addison Mortise/Mortise Deadbolt
9. Select Inside Finish Note: Specify only if different from Outside Finish.
See options in section 6. $63.00-$85.00*
* Upcharge only applies if outside finish is 626 and you are specifying a different inside finish.
10. Select Inside Rose (Not applicable to Addision)
11. Select Handing (Field reversible)
RH Right Handed STANDARD
LH Left Handed N/C
RHR Right Handed Reverse N/C
LHR Left Handed Reverse N/C
12. Select Strike Lip Length
10-136 1-3/16" lip length (MS and MB only) STANDARD
10-136-112 1-1/2" lip length (MS and MB only) N/C
10-136-134 1-3/4" lip length (MS and MB only) $28.50
10-072 1-3/16" lip length (MD only) STANDARD
10-072-112 1-1/2" lip length (MD only) N/C
10-072-134 1-3/4" lip length (MD only) $28.50
13. Select Door Thickness
134 1-3/4" STANDARD
200 2" $51.10
214 2-1/4" $51.10
14. Select Keying Type
Open Keyway Families (Mortise cylinder or FSIC)2
S123 Everest 29 S (Key in Lever or FSIC) STANDARD
C/CE/E/EF/F/FG/G Classic Obverse N/C
Restricted Keyway Families (Mortise cylinder or FSIC)1,2,3
29T Everest 29 T $16.00
DEverest D $16.00
29R Everest 29 R (Everest SL) $16.00
BEverest 29 B (Everest SL) $16.00
Classic Restricted Quad, Numbered, Reverse $16.00
Restricted Keyway Families (SFIC)3
29R Everest 29 R N/C
BEverest B N/C
1. Everest Restricted Keyways require a Letter of Authorization submitted with the order. See sample Letter of Authorization, page 297.
2. Full size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered
separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line item.
3. For restricted keyways please see terms and conditions.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
56
LE Series
Pricing/product description subject to change without notice.
Lever & Knob Kits
Style Design Option 605 606 612 619 622 625 626 643e 626AM
Standard 016, 026, 03, 056, 06, 07, 12I, 17, 18, 416, 426, OME6•••••••• •
ACC6, AST6, MER6, LAT6, LON6•• ••••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, and M856I •• ••••• •
6 Extended Factory Lead Time I Specify handing
Part Number Description Standard levers/knobs Decorative levers
09-401 Outside lever/knob, retaining clip, insertion tool $165.00 $180.00
09-402 Inside lever + bushing, mounting plate, screw pack, spanner wrench
Note: Knobs and levers standard default is for 1-3/4" door. 2" and 2-1/4" door widths also available.
ORDERING INSTRUCTIONS: Specify part number, lever design, and nish. Also specify door thickness when other than 1-3/4". (Example: 09-401 03 626 214)
Rose Kits (Greenwich)
Style Design Option 605 606 612 619 622 625 626 643e 626AM
Standard 00A, 00B, 00C •••••••• •
Decorative MER, AVA •• ••••• •
Part Number Description Price Each
09-403 Inside rose (includes mounting plate and screws)
$92.70
09-404 Outside rose + bushing
09-508 Blank outside rose (not available MER or AVA)
ORDERING INSTRUCTIONS: Specify part number, lever design + rose, and nish. (Example: 09-404 03A 626. Lever design must be specied for proper bushing)
Outside Greenwich Lever/Knob and Rose Subassemblies
Style Design Option 605 606 612 619 622 625 626 643e 626AM
Standard
016, 026, 03, 056, 06, 07, 12I, 17, 18, 416, 426, OME6•••••••• •
ACC6, AST6, MER6, LAT6, LON6•• ••••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, and M856I •• ••••• •
6 Extended Factory Lead Time I Specify handing
Part Number Description Standard levers/knobs Decorative levers
09-506 Outside lever/knob assembly for 00A, 00B or 00C rose $183.00 $198.00
09-655 Outside lever assembly for AST w/Avanti rose or MER w/Merano rose
only $183.00 N/A
ORDERING INSTRUCTIONS: Specify part number, lever design, rose, and nish. (Example: 09-506 M53A 626)
Inside Subassemblies
Available Finishes - Specify for Listed Parts 605 606 612 619 622 625 626 643e 626AM
Part Number Description Contents •••••••• •
Greenwich inside trim assembly without battery cover
L483-033 Mortise deadbolt (MD) Complete trim minus battery cover,
battery holder and mounting
screws
$465.00
L483-034 Mortise with push button (MB) $460.00
L483-035 Mortise with LED (MS) $450.00
Addison inside escutcheon assembly without battery cover
L483-036 Mortise deadbolt (MD) Complete escutcheon minus
battery cover, battery holder and
mounting screws
$510.00
L483-037 Mortise with push button (MB) $505.00
L483-038 Mortise with LED (MS) $500.00
ORDERING INSTRUCTIONS: Specify nish. (Example: L483-036 626)
LE Series Parts
57
LE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Outside Subassemblies
Available Finishes - Specify for Listed Parts 605 606 612 619 622 625 626 643e 626AM
Part Number Description Contents •••••••• •
L483-016 Greenwich Trim
1) Outside reader (electronics & trim)
2) Harness
3) Cover
4) Grounding spring
5) Back plate
6) Two screws
$400.00
Part Number Description Contents Standard Levers/Knobs Decorative Levers
L483-017 Addison Escutcheon
1) Outside reader (electronics & escutcheon)
2) Harness
3) Lever
$600.00 $615.00
L483-051 Addison Escutcheon
1) Outside reader (electronics & escutcheon)
2) Harness
Lever NOT included
$460.00 $460.00
ORDERING INSTRUCTIONS: Specify nish (GRW or ADD). For Addison, also specify lever style. (Example: L483-017 03 626)
Armor Fronts
Available Finishes - Specify for Listed Parts 605 606 612 619 622 625 626 643e 626AM
•••••••• •
Part Number Description Price Each
09-666 1-1/4" wide for 1-3/4" and larger door thicknesses (for MS, MB, MD) $33.70
Strikes
Available Finishes - Specify for Listed Parts 605 606 612 619 622 625 626 643e 626AM
•••••••• •
Part Number Description Contents Price Each
10-136 1-1/4" x 4-7/8" strike, 1-3/16" lip
length, standard (MS and MB)* (1) square corner strike
(2) screws
(1) strike box (includes DPS
magnet)
$37.40
10-136-112 1-1/4" x 4-7/8" strike, 1-1/2" lip
length (MS and MB)* $37.40
10-136-134 1-1/4" x 4-7/8" strike, 1-3/4" lip
length (MS and MB)* $63.50
L583-761
Strike box with magnet tray
only (nish not applicable) -
MS and MB
$14.30
L583-760 DPS magnet for L583-761 only
(nish not applicable) $14.30
10-072 1-1/4" x 4-7/8" strike, 1-3/16" lip
length, standard (MD only)* (1) square corner strike
(2) screws
(1) strike box
$20.50
10-072-112 1-1/4" x 4-7/8" strike, 1-1/2" lip
length (MD only)* $20.50
10-072-134 1-1/4" x 4-7/8" strike, 1-3/4" lip
length (MD only)* $52.40
K510-066 Strike box only (nish not
applicable) - MD only $6.80
*ORDERING INSTRUCTIONS: Specify nish.
Battery Parts
Part Number Description Price Each
L483-039 Battery Harness $9.00
N623-006 Battery Holder $18.00
L483-025 Greenwich battery cover with screw, washer & magnet $35.20
L483-031 Addison battery cover with screw, washer & magnet $38.00
LE Series Parts
Price Book 5
Effective August 12, 2017 • Rev. 08/17
58
LE Series
Pricing/product description subject to change without notice.
Mortise Chassis and Wire Harnesses
Part Number Description Price Each
L483-000 Chassis with harness (MS and MB only) $780.00
L483-001 Chassis with harness (MD only) $940.00
L483-018 Reader harness $30.00
L483-007 Chassis harness with RX module switch $100.00
L483-055 DPS kit (external, MD only) Contains: magnet, switch, and harness $6.30
LE Series Parts
Mortise Cylinders
Available Finishes - Specify for Listed Parts 605 606 612 619 622 625 626 643e 626AM
•••••••• •
Part Number Cylinder only Price Each
Open Restricted
30-021-112 Conventional (non-Everest, non-Primus) - 1-1/2" length $109.00 $125.00
20-793-112 Primus controlled access- 1-1/2" length $181.00
20-793-112-XP Primus XP controlled access- 1-1/2" length
20-593-112 Primus UL 437- 1-1/2" length $210.00
20-593-112-XP Primus XP UL 437- 1-1/2" length
ORDERING INSTRUCTIONS: Specify nish and Cylinder Length. (Reference Cylinder and length requirement table on page 49. (ex 30-021-138-626)
Note: 1 1/2" cylinders support 1 3/4" through 2 1/4" door thickness.
If 1 3/4" thick door a 1 3/8" cylinder can be used by designating 138 in place of 112 in table above. If this is done deduct $41.00 from list price in table.
Door Parts
Part Number Description Price Each
L283-029 (2) Spacers for ANSI A115.1 metal door preparations $33.70
Knob Parts
Part Number Description Price Each
K110-550 Pack of truarc ring (1), spacer (2), knobs $7.90
L583-321 Mounting plate, inside knob $6.80
Cylinder Housing Without Core, LE-Series
Cylinder Type
Cylinder
Finishes Available: 605, 606, 609, 612, 613, 619, 625, 626, 643e
16' Price Each
Door Thickness (+/- 1/8")
1-3/4" 2" 2-1/4"
FSIC 30-016 1-1/2" (112) $55.00
SFIC 80-108* 1-3/8" (138) N/A $65.00
ORDERING INSTRUCTIONS: Specify nish (30-016-112-626)
*Cylinders include compression spring
Lever Parts
Part Number Description Price Each
L283-030 Pack of 20 truarc rings, levers $20.00
L583-212 (1) Mounting post (ferrule) for 1-3/4" door thickness $10.70
L583-213 (1) Mounting post (ferrule) for 2" door thickness $10.70
L583-214 (1) Mounting post (ferrule) for 2-1/4" door thickness $10.70
L283-031 Mounting plate, inside lever $18.30
L283-040 Spring cage (1 required per lever) $9.00
L583-066 Mounting plate screw (2 required per lock) $1.30
L283-198 Spindles and springs for 1-3/4" to 1-7/8" doors (2 each) $14.60
L283-199 Spindles and springs for 2" to 2-1/4" doors (2 each) $17.20
L283-060 Spindle and spring for 1-3/4" to 1-7/8" doors (qty: 1 – 2 required per lock) $7.30
L283-061 Spindle and spring for 2" to 2-1/4" doors (qty: 1 – 2 required per lock) $9.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17 59
LE Series
Pricing/product description subject to change without notice.
LE Series Parts
Screw Packs
Part Number Description Contains Price Each
L483-047 Greenwich screw pack
(2) Reader- mount screws (not nished)
(1) Tamper-resistant battery screw
(1) Battery cover washer
$13.00
L483-048 Addison screw pack
specify nish
(1) Each Philips and tamper-resistant bottom screw - specify nish
(2) Reader- mount screws (not nished)
(1) Tamper-resistant battery screw
(1) Battery cover washer
$21.00
C203-736 Lock Case Screws (2) C603-256, #12-24 WMS PFH $6.00
C203-736 Strike Screws (2) C603-256, #12-24 WMS PFH. $6.00
K110-020 Armor Front Screws (2) K510-210, #8-32 x 1/4" MS PFH $0.82
L483-066 Battery cover screw (10 pack) (10) 24361818 battery cover screw, #4-40 x 1/4" PH
(10) L783-036 battery cover captive washer $20.00
* Consult Customer Care.
Chassis Torx Screw Packs
Part Number Description Contains Price Each
L283-121 Tamper-resistant Torx screw pack for
standard L screws - specify nish
(2) Armor screws, #8-32 x 1/4” (T-15)
(2) Strike screws, #12-24 x 1/2” (T-20)
(1) Each T-15 and T-20 installation tool
$20.20
L483-065 Backplate screw pack w/grounding
spring - specify nish
(1) L783-029, grounding spring
(6) F605-416, #6-32 x 3/8" TFH $5.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17
60
LE Series
Pricing/product description subject to change without notice.
LE Wireless Lock Accessories
Installation Tools
Part Number Description Price Each
40-286 Universal Clamp $440.00
40-248 L/LE Series installation template $390.00
40-291 Universal mortise door position switch (DPS) installation template (For use with only LE-MD lock) $126.00
40-158 Mortise pocket ller (edge) $151.00
Note:: The universal clamp above is necessary when using the remaining products to ensure hole placement accuracy.
These installation tools function together and form a complete LE installation kit.
The "Universal" (Clamp & DPS) products are for use in all CO, AD and LE product installations.
Wood Mounts
Part Number Description Price Each
44-212 LE Series mortise mount (for display) $405.00
61
NDE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
Table of Contents
NDE-Series with ENGAGE Technology - TABLE OF CONTENTS
Finish Codes and Descriptions 61
How to Order 62
Standard Features 63
NDE Functions 64
NDE Series Wireless Lock - Cylindrical 68
NDE Parts 70
Inside Escutcheon Subassembly 70
Battery Holder Kit 70
Outside Escutcheon Subassembly 70
Reader PCBA 70
Levers and Related Components 70
Latches and Related Components 70
Strikes 71
Competitor Core/Compatability Parts 71
Reinforcements — Must be used for hollow metal doors 72
Motorized Chassis Assembly 72
Main Wire Harness 72
Miscellaneous Parts 72
Screws 73
Screw Packs 73
Torx Screw Packs 73
Cylinder Reference Table 73
877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective
Products, General Sales Questions
Technical Questions/Issues, Returns of
Defective Products, Repairs
Email Orders To:
Order_Entry_Schlage_Commercial@allegion.com
Contact For Technical Assistance:
Electronic_Lock_TechProdSupport@allegion.com
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
612 (US 10) Satin Bronze
619 (US 15) Satin Nickel
622 (US19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chrome
626AM Antimicrobial Coating
on Satin Chromium
643e (US 11) Aged Bronze
CONTACT INFORMATION FOR NDE SERIES LOCKS & DEVICES
Payment Address: Schlage Electronic Security
15934 Collections Center Drive
Chicago, IL 60693
62
NDE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS
NDE 80 PD ATH 626 SPA – — – 13-047 10-130 138 S123 – —
NDE Series - How to Order
How to Order:
1. Series:
2. Function:
80 Storeroom with Vandlgard
3. Cylinder Type:
PD Schlage 6-pin Full Cylinder
For options see NDE ordering pages
4. Outside Lever:*
LLL Less interior and exterior levers
SPA Sparta
RHO Rhodes
ATH Athens
*To add tactile warning, use prefix 8. Example: 8SPA
5. Outside Finish:
626 Satin Chrome
605 Bright Brass
606 Satin Brass
612 Satin Bronze
619 Satin Nickel
622 Matte Black
625 Bright Chrome
643e Aged Bronze
626AM Satin Chrome (Antimicrobial Coating)
6. Inside Lever:* Specify only if different from outside lever
SPA Sparta
RHO Rhodes
ATH Athens
*To add tactile warning, use prefix 8. Example: 8SPA
7. Inside Finish: Specify only if different from outside finish
626 Satin Chrome
605 Bright Brass
606 Satin Brass
612 Satin Bronze
619 Satin Nickel
625 Bright Chrome
643e Aged Bronze
626AM Satin Chrome (Antimicrobial Coating)
8. Backset and Latchbolt:
13-047 2-3/4" Backset, Deadlatch, Square Corner, 1-1/8" x 2-1/4" (Standard)
For options see individual Class/Chassis page
9. Strike Plate:
10-130 1-3/16" Lip, ANSI, DPS magnets, no box, 1-1/4" x 4-7/8" (Standard)
For options see individual Class/Chassis page
10. Strike Lip Dimension: Specify only if different from options 10-130 or 10-132 dimensions
138 1-3/8" lip length option available on 10-130 and 10-131 strike plates (normally 1-3/16")
112 1-1/2" lip length option available on 10-132 strike plate (normally 1-1/8")
11. Keyway Type:
S123 Everest 29 S (Standard)
For options see individual Class/Chassis page
12. Additional Options
Price Book 5
Effective August 12, 2017 • Rev. 08/17 63
NDE Series
Pricing/product description subject to change without notice.
How to Order
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾"
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X” and are not subject to standard discounting.
5. 6 denotes a lock or part that requires an extended lead time.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $16.00. This does not apply to Primus cylinders.
See Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with "C" keyway and KD or 0-bitted will receive 6 pin cylinders (keyed 5) with 5 pin keys.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered
as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
Standard Features
Certification ANSI/BHMA Certified A156.25-2013, A156.2-2011, Series 4000, Grade 1, UL 294,
UL 10C
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike 1 1/4" x 4 7/8", ANSI Square corner, with DPS magnets, no box
Backset 2 3/4"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range Comes set for 1-3/4" thick doors. Can be field adjusted for doors 1-5/8"-2" thick.
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
Price Book 5
Effective August 12, 2017 • Rev. 08/17
64
NDE Series
Pricing/product description subject to change without notice.
NDE Wireless Lock Functions
ANSI/BHMA Certified A156.25-2013, A156.2-2011, Series
4000, Grade 1, UL 294, UL 10C
SCHLAGE ANSI
Keyed Locks
NDE80PD F86 Storeroom Lock with Vandlgard
Lockset is normally secure with outside
lever disengaged. Valid credential or key
momentarily unlocks door. Valid credential
may be used to change to a passage or
secured state. Inside lever always allows
free egress.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 65
NDE Series
Pricing/product description subject to change without notice.
NDE Wireless Locks
Athens (ATH) Sparta (SPA) Rhodes (RHO)
Commercial Lever Suite
NDE Levers AD/CO Levers ND Levers L Lock Levers 98/99 Exit AL Lock S Lock F Lock
Athens Athens Athens 07 07 Jupiter Jupiter
Sparta Sparta Sparta 17 17 Neptune Neptune Jazz
Rhodes Rhodes Rhodes 06 06 Saturn Saturn Elan
Tubular
Tactile Options
Rhodes Lever Shown
(also available on Athens and Sparta)
Latches
Deadlatch, 13-247 Anti-Friction Fire Door
Deadlatch, 14-042
Deadlatch, 14-047 Deadlatch, 14-048
Strikes
ANSI Strike,
10-130 ANSI Strike, standard box
10-131 T Strike,
10-132 Square corner,
T-strike, deep box,
fire door latch,
10-133
Price Book 5
Effective August 12, 2017 • Rev. 08/17
66
NDE Series
Pricing/product description subject to change without notice.
NDE Series Wireless Lock - Cylindrical
Cylinder
PD
With cylinder
Schlage- Everest 29 S123
6 Pin Key-in-Lever (KIL)
Keyed different as standard with two keys
ZD
With cylinder
Schlage Everest SL
6-pin Key-in-Lever - factory keyed only
LD
Less cylinder
Schlage, Falcon
6 Pin Key-in-Lever (KIL)
RD
With cylinder
Schlage- Everest 29 S123
6 Pin Full Size Interchangeable Core (FSIC)
Keyway one bitted as standard with two keys
JD
Less cylinder
Schlage
6 Pin Full Size Interchangeable Core (FSIC)
GD
With cylinder
Schlage Everest 29 R
7 Pin Small Format Interchangeable Core (SFIC)
Factory master keyed with two keys as standard, master keying must be specied
*Less Core
BD
Less cylinder
Schlage, Falcon, Competitive OEM's
7 Pin Small Format Interchangeable Core (SFIC)
LD SAR
Less cylinder
Sargent (10L+11L)
6 Pin Key-in-Lever (KIL)
*Less Core
JD SAR
Less cylinder
Sargent 6300
6 Pin Full Size Interchangeable Core (FSIC)
*Less Core
JD CO6
Less cylinder
Corbin 8000
6 Pin Full Size Interchangeable Core (FSIC)
JD YA6
Less cylinder
Yale 1210 or Medeco 31*0100
6 Pin Full Size Interchangeable Core (FSIC)
Notes: 1. Competitor lever designs come in finishes 626 standard, and 605, 606, 612, 619, 625, 643e, and 626AM with extended lead-times.
2. For PD, RD and GD -Master Keyed cylinders can be specified and will be shipped in lock packaging.
3. For Master Key System Summary form which should accompany the master keyed order, see pages 283-293.
4. For Master Keying, additional line item 50-210 is required for Classic and Everest cylinders.
5. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
6. Spring cages & tail pieces are different based on the type of cylinder and chassis selected. Please see the NDE-Series parts guide for more information.
7. The NDE-Series accepts many popular models of standard, SFIC, and FSIC cylinders. See pricebook for specific configurations.
8. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 67
NDE Series
Pricing/product description subject to change without notice.
NDE Series Wireless Lock - Ordering Guide
Quantity
1. Series
2. Function 80
3. Cylinder
4. Outside Lever
5. Outside Finish
6. Inside Lever1
7. Inside Finish1
8. Backset & Latch2
9. Strike3
10. Keyway
Ex. 1 NDE 80 PD SPA 626 13-047 10-130 S123
Please complete all information above and email order to:
Order_Entry_Schlage_Commercial@allegion.com
1. Specify only if different from outside
2. Backset & Latch: 13-049 standard for cylindrical if no selection is made
3. Strike Plate: 10-025 standard for cylindrical if no selection is made
Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact
(Name, Phone, Fax)
68
NDE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
NDE Series Wireless Lock - Cylindrical
Credentials available, see pages 26-31.
3. Select Cylinder Type
PD ÅWith Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard) N/C
ZD ÅWith Cylinder, Schlage- Everest SL, 6 Pin KIL (factory master keyed only) N/C
LD Less Cylinder, Schlage, Falcon, 6 Pin KIL DEDUCT $58.00
RD ţ With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC $35.00
JD Less Cylinder, Schlage, 6 Pin FSIC DEDUCT $32.00
TFSIC construction core $35.00
GD ţ With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only) N/C
BD Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC) N/C
LD COR Less Cylinder, Corbin Russwin KIL, 6 Pin FSIC DEDUCT $32.00
LD SAR 6Less Cylinder, Sargent (10L + 11L), 6 Pin KIL DEDUCT $58.00
JD SAR 6Less Cylinder, Sargent 6300, 6 Pin FSIC DEDUCT $32.00
JD CO6 6Less Cylinder, Corbin 8000, 6 Pin FSIC DEDUCT $32.00
JD CO7 Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR) DEDUCT $32.00
JD MED Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles) DEDUCT $32.00
JD YA6 6Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC DEDUCT $32.00
JD YA7 Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles) DEDUCT $32.00
HD SFIC construction core $40.00
BDC SFIC disposable N/C
50-231 Construction core handling charge (non-refundable) $9.50
Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which
should accompany the master keyed order, see page 283.
r For Master Keying, additional line item 50-210 is required $18.30 each.
£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
For additional assistance on Master Keying as well as restricted keyways please contact customer service.
6 Extended lead time on all finishes except 626
4. Select Outside Lever*
LLL Less interior and exterior levers DEDUCT $43.80
SPA Sparta N/C
RHO Rhodes N/C
ATH Athens N/C
* Tactile Warning use 8AT for Athens, 8RO for Rhodes and 8SP for Sparta. $42.80 per lever.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
5. Select Outside Finish
626 Satin Chrome N/C
605 Bright Brass $64.00
606 Satin Brass $64.00
612 Satin Bronze $64.00
619 Satin Nickel $64.00
622 Matte Black $64.00
625 Bright Chrome $64.00
643e Aged Bronze $64.00
626AM Satin Chrome Antimicrobial $87.00
6. Select Inside Lever* (Specify only if different from Outside Lever)
LLL Less interior and exterior levers N/C
SPA Sparta N/C
RHO Rhodes N/C
ATH Athens N/C
* Tactile Warning use 8AT for Athens, 8RO for Rhodes and 8SP for Sparta. $39.60 per lever.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
1-2. Select Chassis/Function
NDE-80 Cylindrical Storeroom Lock with Vandlgard $860.00
NDE-80
Small Format
Interchangeable Core
GD BD
Full Size
Interchangeable Core
RD JD JD SAR JD CO6 JD YA6
Full Cylinder
PD LD LD SAR
69
NDE Series
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
NDE Series Wireless Lock - Cylindrical
7. Select Inside Finish (Specify only if different from Outside Finish)
626 Satin Chrome N/C
605 Bright Brass $64.00*
606 Satin Brass $64.00*
612 Satin Bronze $64.00*
619 Satin Nickel $64.00*
625 Bright Chrome $64.00*
643e Aged Bronze $64.00*
626AM Satin Chrome Antimicrobial $87.00*
* Charge only applies if outside finish is 626 and you are specifying a different inside finish.
8. Select Backset & Latchbolt
LLL Less Latch DEDUCT $32.10
13-247 2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4" STANDARD
14-042 2-3/4" Backset, Deadlatch Anti-friction re door latch, Square corner, $165.00
14-047 2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4" N/C
14-048 2-3/8" Backset, Deadlatch Square corner, 1" x 2-1/4" N/C
9-10. Select Strike Plate and Strike Lip Length
10-130* 1-3/16" Lip, ANSI, DPS magnets, no box, 1-1/4" x 4-7/8" STANDARD
10-131* 1-3/16" ANSI, DPS magnets, Standard box, 1-1/4" x 4-7/8" N/C
10-132**1-1/8" Lip, Square Corner, T-strike, DPS magnets, box, 1-1/8" - 2-3/4" N/C
10-133 1-1/8" Lip, Square Corner, T-strike, DPS magnets, deep box, re door
latch
$15.20
K510-066 Box for ANSI strike (Must be specic) N/C
* 1-3/8" Lip available, must specify 1-3/8" Lip $13.70, 1-1/2" Lip available, must specify 1-1/2" Lip $13.70
** 1-1/2" Lip available, must specify 1-1/2" Lip $7.50
† DPS magnet requires prep and install beneath strike
11. Select Keying Type
Open Keyway Families: KIL or FSIC2
S123 Everest 29 S (Key in Lever or FSIC) STANDARD
C/CE/E/EF/ F/ FG/ G Classic Obverse N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T Everest 29 T $16.00
DEverest D $16.00
29R Everest 29 R (Everest SL) $16.00
BEverest B (Everest SL) $16.00
Classic Restricted Quad, Numbered, Reverse $16.00
Restricted Keyway Families: SFIC3
29R Everest 29 R $77.00
BEverest B $77.00
1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,
see page 295.
2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must
be ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.
3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which
should accompany the master keyed order, see page 283.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
70
NDE Series
Pricing/product description subject to change without notice.
NDE Wireless Lock Parts
Levers and Related Components
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
••••••• •
Part Number Description Price Each
N523-127 FSIC Core Driver $2.40
N523-091 SFIC Core Driver $11.10
09-774 SFIC Core Driver and Spacer $13.70
D500-000 SFIC Core Spacer - Spacer required for 6-pin, no spacer required for 7-pin $1.50
New product manufactured on or after November 1, 2016 (reference serial number label on product)
03-230* Lever - Closed; ATH, RHO, SPA
$124.00
03-231* Lever - Cylinder - Schlage KIL; ATH, RHO, SPA
03-232* Lever - Cylinder - Schlage FSIC; ATH, RHO, SPA
03-200* Lever - Cylinder - Schlage SFIC; ATH, RHO, SPA
Original product manufactured before November 1, 2016 (reference serial number label on product)
03-030* Lever - Closed; ATH, RHO, SPA
$124.00
03-031* Lever - Cylinder - Schlage KIL; ATH, RHO, SPA
03-032* Lever - Cylinder - Schlage FSIC; ATH, RHO, SPA
03-000* Lever - Cylinder - Schlage SFIC; ATH, RHO, SPA
*Specify part number, lever style, nish. Ex: 03-031 ATH 626 (open lever, Athens design, 626 nish)
Inside Escutcheon Subassembly
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
••••••• •
Part Number Description Contents Price Each
N223-047 Inside Escutcheon
Subassembly
(without Main PCBA)
(3) #4-40 x .25 PH PD Taptite Screw
(1) Inside Esctucheon
(1) RF Window
(1) Inside Battery Cover
$117.00
N223-048 Inside Escutcheon
Assembly
(with Main PCBA)
(3) #4-40 x .25 PH PD Taptite Screw
(1) Inside Esctucheon
(1) RF Window
(1) Inside Battery Cover
(1) Main PCB Module
(1) Inside Label
$456.00
Outside Escutcheon Subassembly
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
••••••• •
Part Number Description Contents Price Each
N223-045 Outside Escutcheon
Subassembly (without
reader PCBA)
(3) #6-32 x .25 FH PD TC Screw
(1) Outside Esctucheon
(1) Outside RF Window Assembly
(1) Adjustment Spring
(1) Outside Backplate
$96.10
Latches and Related Components
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
•••••••
Part Number Backset - Description Price Each
Dead Latch***
14-047 2 3/8" - Square corner, 1 1/8" x 2 1/4" $107.00
14-048 2 3/8" - Square corner, 1" x 2 1/4" $107.00
13-247 2 3/4" - Square corner, 1 1/8" x 2 1/4" $82.20
14-042 2 3/4" - Anti-friction Fire Door Latch 1" Square corner,
1 1/8" x 2 1/4", 3/4" Throw $327.00
*** All latches require reinforcement when used in hollow metal door applications
Battery Holder Kit
Part Number Description Contents Price Each
N223-044 Battery Holder Kit (1) Battery Tray Assembly
(1) Battery Strap $23.30
Reader PCBA
Part Number Description Price Each
N223-046 Reader PCBA $324.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17 71
NDE Series
Pricing/product description subject to change without notice.
Competitor Core/Compatability Parts
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
66666 6
Part Number Description Price Each
New product manufactured on or after November 1, 2016 (reference serial number label on product)
03-234* Lever - Cylinder - Corbin Russwin KIL (L-CO6); ATH, RHO, SPA
$230.00
03-235* Lever - Cylinder - Corbin Russwin 7-pin FSIC (J-CO7); RHO
03-236* Lever - Cylinder - Yale 7-pin FSIC (J-YA7); RHO
03-237* Lever - Cylinder - Medeco 32 (J-MED); ATH, RHO, SPA
03-244* Lever - Cylinder - Sargent KIL (L-SAR); ATH, RHO, SPA
03-255* Lever - Cylinder - Medeco 31 or Yale 1210 6-pin FSIC (J-YA6); ATH, RHO, SPA
03-266* Lever - Cylinder - Corbin Russwin 6-pin FSIC (J-CO6); ATH, RHO, SPA
03-277* Lever - Cylinder - Sargent FSIC (J-SAR); ATH, RHO, SPA
N523-218 Springcage & Lever Catch Assy. - Outside Standard
(PD, LD, ZD, RD, JD, TD, BD, BDC, GD, HD, LD SAR , LD CO6, JD C06, JD SAR, JD CO7) $63.30
N523-224
Springcage & Lever Catch Assy. - Outside Competitor Cores (JD YA6, JD YA7, JD MED)
$131.00
Original product manufactured before November 1, 2016 (reference serial number label on product)
03-044* Lever - Cylinder - Sargent KIL (L-LAR); ATH, RHO, SPA
$230.00
03-055* Lever - Cylinder - Medeco 31 or Yale 1210 6-pin FSIC (J-YA6); ATH, RHO, SPA
03-066* Lever - Cylinder - Corbin Russwin 6-pin FSIC (J-CO6); ATH, RHO, SPA
03-077* Lever - Cylinder - Sargent FSIC (J-SAR); ATH, RHO, SPA
N123-064 Outside spring cage for Sargent key in lever
$287.00 N123-065 Outside spring cage for Yale (6 pins)full size removable core
N123-066 Outside spring cage for Corbin-Russwin (6 pins) or Sargent full size removable core
N523-146 Tail piece Sargent KIL $2.60
N523-147 Tail piece Yale FSIC $21.80
N523-148 Tail piece Sargent and Corbin Russwin FSIC $11.80
XN12-292 Tail piece Sargent XC FSIC
*Specify part number, lever style, nish. Ex: 03-055 RHO 613 (Yale lever, Athens design, 613 nish)
Strikes
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
••••••• •
Part Number Description Contents Price Each
10-130-1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" (1) ANSI strike
(2) C603-256 screws
(1) ANSI strike magnet tray
(2) DPS magnet
$27.00
10-130-138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 1) ANSI strike
(2) C603-256 screws
(1) ANSI strike magnet tray
(2) DPS magnet
$52.70
10-130-112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" (1) ANSI strike
(2) C603-256 screws
(1) ANSI strike magnet tray
(2) DPS magnet
$52.70
10-131-1316 1 3/16" - ANSI, standard box, 1 1/4" x 4 7/8" (1) ANSI strike
(2) C603-256 screws
(1) Standard box
(1) ANSI strike magnet tray
(2) DPS magnet
$33.90
10-131-138 1 3/8" - ANSI, standard box, 1 1/4" x 4 7/8" (1) ANSI strike
(2) C603-256 screws
(1) Standard box
(1) ANSI strike magnet tray
(2) DPS magnet
$59.40
10-131-112 1 1/2" - ANSI, standard box, 1 1/4" x 4 7/8" (1) ANSI strike
(2) C603-256 screws
(1) Standard box
(1) ANSI strike magnet tray
(2) DPS magnet
$59.40
10-132-118 1 1/8" - Square corner, T-strike, box,
1 1/8" x 2 3/4"
(1) T-strike
(1) Standard box
(1) Door position magnet $24.60
10-132-112 1 1/2" - Square corner, T-strike, box,
1 1/8" x 2 3/4"
(1) T-strike
(1) Standard box
(1) Door position magnet $28.90
10-133-118 1 1/8" - Square corner, T-strike, deep box,
1 1/8" x 2 3/4"
Use with re door latch
(1) T-strike
(1) Deep box
(1) Door position magnet $28.90
10-133-112 1 1/2" - Square corner, T-strike, deep box,
1 1/8" x 2 3/4"
Use with re door latch
(1) T-strike
(1) Deep box
(1) Door position magnet $28.80
K510-066 Box for ANSI strike (1) Standard box $6.60
NDE Wireless Lock Parts
Price Book 5
Effective August 12, 2017 • Rev. 08/17
72
NDE Series
Pricing/product description subject to change without notice.
NDE Wireless Lock Parts
Reinforcements — Must be used for hollow metal doors
Part Number Description Price Each
37-001 Metal door reinforcer kit, ts both 7/8" and 1" diameter housings. Specify door thickness, includes A501-567 and A501-
565 or A501-566. $35.90
24483760 Latch Spacer – ts 1" diameter latch housing and 1-3/4" hollow metal doors (steel & aluminum) $4.90
A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. $18.00
Motorized Chassis Assembly
Part Number Description Contents Price Each
N223-007 Motorized Chassis Assembly (1) NDE Chassis Subassembly (1) Motor Actuator Subassembly (1) Main Wire Harness $227.00
Main Wire Harness
Part Number Description Price Each
N223-019 Main Wire Harness $34.90
Miscellaneous Parts
Part Number Description Price Each
Inside Baseplate
N623-000 Inside Baseplate $25.50
New product manufactured on or after November 1, 2016 (reference serial number label on product)
Spring Cages
N523-218 Springcage & Lever Catch Assy. - Outside Standard
(PD, LD, ZD, RD, JD, TD, BD, BDC, GD, HD, LD SAR , LD CO6, JD C06, JD SAR, JD CO7) $63.30
N523-221 Springcage & Lever Catch Assy. - Inside Less Cylinder $44.50
Original product manufactured before November 1, 2016 (reference serial number label on product)
Spring Cages
N123-022 Outside spring cage for all functions except SFIC $63.30
N123-032 Inside Spring Cage $45.60
N123-056 Outside spring cage for all SFIC functions $66.20
24341463 SDS O-Ring – 50 pack $18.90
Conversion Kits
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
••••••••• •
Part Number Backset - Description Price Each
40-400 Inside Spring Cage / Lever Conversion Kit $190.00
40-600 Outside Spring Cage / Lever Conversion Kit
Notes: All kits will contain a spring cage and lever. Some kits will contain
a button or tailpiece
Kits are limited to previously offered product - KIL, FSIC, SFIC, L-SAR, J-SAR, J-CO6, J-YA6
When ordering specify: Function, Trim, Finish and Core (if applicable)
Price Book 5
Effective August 12, 2017 • Rev. 08/17 73
NDE Series
Pricing/product description subject to change without notice.
Screws
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
A501-171, N523-092, L583-133, C603-256, C603-897 •••••••
Part
Number Description Door
Thickness Type Size Price Each
C603-256* ANSI strike PFH Combo 12-24 x 1" $0.96
C603-897* Latch and strike PFH Combo #8 x 3/4" $0.82
N523-021* Spring cage screws 1 3/8" – 2" PFH Machine #10 x 32 x 2 1/8" $1.70
* Order in multiples of 100
Screw Packs
Available Finishes - Specify for Listed Parts 605 606 612 619 625 626 643e 626AM
B202-517, C203-736, N123-020 ••••••
Part
Number Description Contents Price Each
B202-517 Latch and strike (4) C603-897 $7.60
C203-736 ANSI strike (2) C603-256 $6.00
N223-049 Mounting kit (4) C603-897
(1) N523-108
(2) 96954557
(1) N623-048
(1) N623-049
$12.30
Torx Screw Packs
Available Finishes - Specify for Listed Parts 605 606 612 613 619 625 626 643e 626AM
C203-311, C203-312 ••••••••
Part
Number Description Contents Price Each
C203-311** Latch and strike (4) C503-766 (T-15)
$19.40
C203-312** Latch and ANSI strike (2) C503-766 (T-15)
(2) L583-371 (T-20)
** Torx screw packs are furnished with appropriate T-xx installation tool(s)
Cylinder Reference Table
Available Finishes - Specify for Listed Parts 606 626
23-065, 20-765/XP, 20-565/XP, 21-000
Part
Number Cylinder Mechanism Function Design
Price Each
Open Restricted
23-065 Conventional
Standard
Functions All
$58.00 $74.00
20-765 Primus
$129.00
20-765-XP Primus XP
20-565 Primus UL437
$159.00
20-565-XP Primus UL437 XP
NDE Wireless Lock Parts
Price Book 5
Effective August 12, 2017 • Rev. 08/17
74
NDE Series
Pricing/product description subject to change without notice.
NDE Wireless Lock Accessories
Wood Mounts
Part Number Description Price Each
44-184 NDE Series cylindrical mount $375.00
Price Book 5
Effective August 12, 2017 • Rev. 08/17 75
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked Locks & Devices
AD-SERIES NETWORKED - TABLE OF CONTENTS
How to Order 76
AD-Series Networked Locks & Devices Overview 77
AD-300 Networked Hardwired 90
Cylindrical 90
Mortise/Mortise Deadbolt 92
Exit Trim 94
AD-301 Networked Hardwired (FIPS 201-1 Compliant) 96
Cylindrical 96
Mortise/Mortise Deadbolt 98
Exit Trim 100
AD-400 Networked Wireless 102
Cylindrical 102
Mortise/Mortise Deadbolt 104
Exit Trim 106
AD-401 Networked Wireless (FIPS 201-1 Compliant) 108
Cylindrical 108
Mortise/Mortise Deadbolt 110
Exit Trim 112
AD-Series 993 Non- Functioning “Dummy” Trim 114
AD-Series Networked Accessories 116
CONTACT INFORMATION FOR AD-SERIES NETWORKED LOCKS & DEVICES
Payment Address: Schlage Electronic Security
15934 Collections Center Drive
Chicago, IL 60693
877-671-7011
Customer Service: Technical Support:
Order Status, Credit Returns of Non-Defective
Products, General Sales Questions
Technical Questions/Issues, Returns of
Defective Products, Repairs
Email Orders To:
Order_Entry_Schlage_Commercial@allegion.com
Contact For Technical Assistance:
Electronic_Lock_TechProdSupport@allegion.com
For AD-Series Networked Locks & Devices Warranty Information please see page 13.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
76
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked • How to Order
How to Order:
1. Series
2. Class
300 Networked Hardwired
301 Networked Hardwired
400 Networked Wireless
401 Networked Wireless
3. Chassis:
CY Cylindrical
MS Mortise
MD Mortise Deadbolt
993R Exit Trim – Rim/CVR/CVC
993S Exit Trim – SVR
993M Exit Trim – Mortise
993DT “Dummy” Exit Trim
4. Function:
70 Classroom/Storeroom
50 Office
40 Privacy
60 Apartment
5. Reader:
KP Keypad
MGK Magnetic Stripe + Keypad (Insert)
MG Magnetic Stripe (Insert)
MSK Magnetic Stripe + Keypad (Swipe)
MS Magnetic Stripe (Swipe)
MTK Multi-Technology + Keypad
MT Multi-Technology
FMK FIPS 201-1 Compliant Multi-Technology + Keypad
6. Lever: r
SPA Sparta ATH Athens
RHO Rhodes TLR Tubular
r To add tactile warning, use prefix 8. Example 8SPA
7. Finish:
626 Satin Chrome
605 Bright Brass
606 Satin Brass
612 Satin Bronze
619 Satin Nickel
625 Bright Chrome
643e Aged Bronze
626AM Satin Chrome (Antimicrobial Coating)
8. Cylinder Type:
PD Schlage 6-pin Full Cylinder (For options see individual Class/Chassis page)
9. Keyway Type:
S123 Everest 29 (For options see individual Class/Chassis page)
10. Handing:
RH Right Handed
LH Left Handed
RHR Right Handed Reverse
LHR Left Handed Reverse
11. Battery Holder:
4B - 4AA Battery Kit 8B - 8AA Battery Kit
12. Backset and Latch or Armor Front:
13-049 2-3/4" Backset, Deadlatch, Square Corner, 1-1/8" x 2-1/4" (Standard on CY Chassis)
09-663 Armor Front, 1-1/4" Wide, Square Corner (Standard on MS Chassis)
For options see individual Class/Chassis page
13. Strike:
10-025 1-3/16" Lip, ANSI, no box, 1-1/4" x 4-7/8" (Standard on CY Chassis)
10-072 1-3/16" Lip, 1-1/4" x 4-7/8" square corner, box (Standard on MS Chassis)
For options see individual Class/Chassis page
14. Door Thickness:
1-3/4" (Standard)
For options see individual Class/Chassis page
15. Additional Options
AD – 400 – CY70 – MG – SPA626 – PD – S123 – RH – 4B – 13-049 – 10-025 – 1-3/4BAA
REQUIRED FIELDS FACTORY DEFAULT AND OPTIONS
Price Book 5
Effective August 12, 2017 • Rev. 08/17 77
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked Locks
With the AD-Series, one platform translates to an endless number of adaptable solutions. You can choose the features and functions that are right
for the application today, and upgrade to meet your evolving needs in the future.
Class
AD-300 Networked/Hardwired; Direct RS-485 connection or Wiegand or Clock & Data
AD-301 FIPS 201-1 Compliant, Networked Hardwired; Direct RS-485 connection or Wiegand or Clock & Data
AD-400 Networked/Wireless; 900 MHz, Secure encrypted data transmission
AD-401 FIPS 201-1 Compliant, Networked Wireless; 900 MHz, Secure encrypted data transmission
Note: 1. AD-Series locks are upgradable from standalone to networked by applying a communication module available in the accessories section and new firmware available on
www.schlage.com/support.
Chassis
CY: Cylindrical Bored lock installed into round hole in the door
MS: Mortise Lock case installed into a mortise rectangular “pocket” in the door
MD: Mortise
Deadbolt Mortise lock with built-in interconnected auxiliary deadbolt
993R: Exit Trim Rim/Concealed Vertical Rod* (CVR) & Concealed Vertical Cable* (CVC) *Metal door only
993M: Exit Trim Mortise
993S: Exit Trim Surface Vertical Rod (SVR)
993DT: Exit Trim Non-Functioning “Dummy” Exit Trim
Notes: 2. Mortise deadbolt requires RS-485 connection to the ACP, See pages 87-88 for system diagram. Check with access control software provider to verify function is enabled.
3. Exit trim is only available in 70 function
4. Exit trim utilizes universal hardware to simplify installation to a variety of exit device. AD-Series networked locks require a request to exit switch, please see compatibility
chart below.
Exit Device Compatibility
Exit trim utilizes universal hardware to simplify installation to a variety of exit devices*.
Exit Device Compatibility Rim SVR CVR/CVC Mortise
Von Duprin 98/99 and 98/99XP l l l l
Von Duprin 22/22F l l
Falcon 25 l
* Low current request-to-exit switch is required. Part Number for Von Duprin request to exit switch: 050281. Part Number for Falcon AE switch: 650359.
Metal door only.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
78
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Function AD-300/301 AD-400/401
70: Classroom/
Storeroom
Lockset is normally secure. Inside lever always allows free egress.
Valid toggle credentials on the exterior may be used to change to
a passage or secured status.
50: Ofce
Lockset is normally secure. Inside lever always allows free egress. Interior
pushbutton on inside housing may be used to select a passage or secured
status. Meets need for lockdown function for safety and security.
NOTE: Valid toggle credentials on the exterior may also be used to change status.
Has interior pushbutton (IPB).
40: Privacy
Lockset is normally secure. Inside lever always allows free egress. Interior
pushbutton on inside housing may be used to select a privacy status. The
interior pushbutton will disable normal electronic access from the exterior.
Opening the door or pressing the interior pushbutton a second time on the
inside housing deactivates the privacy status. Has interior pushbutton (IPB).
60: Apartment
Lockset is normally secure. Inside lever always allows free egress. Interior
pushbutton on inside housing may be used to select a passage or secured
status. Opening the door or pressing the interior pushbutton causes the
lockset to toggle unsecured. While toggled unsecured, the lockset can only
be secured while the door is closed by pressing the interior pushbutton or
using a normal credential on the exterior. Normal electronic access from the
exterior is always allowed. Has interior pushbutton.
LED LED
Privacy
button Privacy
button
Price Book 5
Effective August 12, 2017 • Rev. 08/17 79
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Reader
KP: Keypad 12 button design
MGK: Magnetic
Stripe + Keypad
(Insert)
Congurable to read the complete Track 1, 2 or 3.
Available with and without 12 button keypad.
MG: Magnetic
Stripe (Insert)
MSK: Magnetic
Stripe + Keypad
(Swipe)
MS: Magnetic
Stripe (Swipe)
MTK: Multi-
Technology +
Keypad
Single solution that reads 125 kHz proximity
and 13.56 MHz smart credentials.
Available with and without 12 button keypad
FMK: FIPS 201-1
Compliant Multi-
Technology +
Keypad
MT: Multi-
Technology
Notes: 5. Please refer to AD-Series data sheets and solution sheets prior to ordering to verify credential compatibility.
6. FMK reader now sold separately for field upgrades.
7. Must specify finish when ordering reader separately. KP, MGK, MG, MSK & MS readers available in 626, 605, 606, 612, 619, 625 & 643e. MT, MTK & FMK readers are
available in Grey (for 619, 626, 626AM & 625) and available in Brown (for 605, 606, 612 & 643e).
Price Book 5
Effective August 12, 2017 • Rev. 08/17
80
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Lever
RHO Rhodes
SPA Sparta
TLR Tubular
ATH Athens
Notes: 8. All lever designs are available in finishes 605, 606, 612, 619, 625, 626, 643E and 626AM.
9. SPA, TLR & ATH Meet California Fire Code for 1/2" or less return to the door.
10. Changing Lever Cylinder Compatibility on a device typically requires replacement of existing spring cage and tailpiece.
11. To order tactile warning levers use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
12. AD Series, CO Series & ND Series levers may be interchangeable in some cases depending whether it is an interior
or exterior lever, the type of chassis and the type of cylinder/ spring cage/ tail piece. Please consult the AD Series Parts guide for more information.
Finish
626 Satin Chrome BHMA # 626E, Government # US26D
605 Bright Brass BHMA # 605E, Government # US3
606 Satin Brass BHMA # 606E, Government # US4
612 Satin Bronze BHMA # 612E, Government # US10
619 Satin Nickel
625 Bright Chrome BHMA # 625E, Government # US26
643e Aged Bronze
626AM Satin Chrome Antimicrobial
Note: 13. Please refer to the Electronic Access Control catalog or online product information at us.allegion.com to view each finish.
5
¹⁄₈"
3⁷⁄₁₆"
5¹⁄₂"
3⁷⁄₁₆"
5¹⁄₂"
3⁷⁄₁₆"
5¹⁄₈"
3⁷⁄₁₆"
Price Book 5
Effective August 12, 2017 • Rev. 08/17 81
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
Cylinder
PD
With cylinder
Schlage- Everest 29 S123
6 Pin Key-in-Lever (KIL)
Keyed different as standard with two keys
LD
Less cylinder
Schlage, Falcon
6 Pin Key-in-Lever (KIL)
RD
With cylinder
Schlage- Everest 29 S123
6 Pin Full Size Interchangeable Core (FSIC)
Keyway one bitted as standard with two keys
JD
Less cylinder
Schlage
6 Pin Full Size Interchangeable Core (FSIC)
GD
With cylinder
Schlage Everest 29 R
7 Pin Small Format Interchangeable Core (SFIC)
Factory master keyed with two keys as standard, master keying must be specied
*Less Core
BD
Less cylinder
Schlage, Falcon, Competitive OEM's
7 Pin Small Format Interchangeable Core (SFIC)
LD SAR
Less cylinder
Sargent (10L+11L)
6 Pin Key-in-Lever (KIL)
*Less Core
JD SAR
Less cylinder
Sargent 6300
6 Pin Full Size Interchangeable Core (FSIC)
*Less Core
JD CO6
Less cylinder
Corbin 8000
6 Pin Full Size Interchangeable Core (FSIC)
JD CO7
Less cylinder
Corbin 8000-7
7 Pin Full Size Interchangeable Core (FSIC)
(Only RHO, 8RO, SPA, 8SP, TLR, 8TR)
JD MED
Less cylinder
Medeco 32*0201
6 Pin Full Size Interchangeable Core (FSIC)
JD YA6
Less cylinder
Yale 1210 or Medeco 31*0100
6 Pin Full Size Interchangeable Core (FSIC)
JD YA7
Less cylinder
Yale 1220
7 Pin Full Size Interchangeable Core (FSIC)
LD FA7
Less cylinder
Falcon
7 Pin Key-in-Lever (KIL)
(Only RHO, 8RO, SPA, 8SP lever styles) *Less Core
Notes: 14. Competitor lever designs come in finishes 626 standard, and 605, 606, 612, 619, 625, 643e, and 626AM with extended lead-times.
15. For PD, RD and GD -Master Keyed cylinders can be specified and will be shipped in lock packaging.
16. For Master Key System Summary form which should accompany the master keyed order, see pages 283-293.
17. For Master Keying, additional line item 50-210 is required for Classic and Everest cylinders.
18. Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
19. For additional assistance on Master Keying as well as restricted keyways please contact your local sales representative.
20. Spring cages & tail pieces are different based on the type of cylinder and chassis selected. Please see the AD-Series parts guide for more information.
21. The AD-Series accepts many popular models of standard, SFIC, and FSIC cylinders. Consult the Keyway/Cylinder compatibility datasheet (010432) for details. See
pricebook for specific configurations.
AD-Series Networked
Price Book 5
Effective August 12, 2017 • Rev. 08/17
82
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Key Systems Available Through Schlage
Everest 29 S
Keyway Family
Patent protected open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent protection
through 2029.
Everest 29 T
Keyway Family
Patent protected restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats. Patent
protection through 2029.
Everest D Keyway
Family Restricted keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Everest C Keyway
Family Open keyways that are available in full size key in lever and full size interchangeable core (FSIC) formats.
Schlage Classic
Open Keyways Classic (C/E/F): Open keyways available in key in lever and full size interchangeable core designs
Everest B Keyway
Family Restricted keyways that are available on small format interchangeable core (SFIC).
Everest 29 R
Keyway Family Patent protected restricted keyways that are available on small format interchangeable core (SFIC). Patent protection through 2029.
Notes: 22. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order.
23. See sample Letter of Authorization page 295.
24. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be ordered separately. Lock should
be ordered less cylinder and Primus cylinder should be a separate line..
25. Contact your local SSC representative for assistance in determining which format and level of exclusivity best suits your needs.
Handing
RH Right Handed: Hinges on Right Opens Inward
LH Left Handed: Hinges on left Opens Inward
RHR Right Handed Reverse: Hinges on Right Opens Outward
LHR Left Handed Reverse: Hinges on Left Opens Outward
Notes: 26. Exit trim 993 chassis available only with RHR or LHR option.
27. Handing is field reversible, but requires removal of the exterior escutcheon cover. Please see AD-Series installation instructions for details.
Battery
4B 4AA Battery Holder and Cover Kit
8B 8AA Battery Holder and Cover Kit
Notes: 28. AD-300/AD-301 are hardwired and therefore do not require battery power and ship standard with a cover only and no batteries.
29. AD-Series locks use standard off the shelf AA batteries.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 83
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Backset & Latchbolt (Cylindrical Chassis)
13-049 2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4"
14-049 2-3/4" Backset, Deadlatch Anti-friction re door latch,
Square corner, 1-1/8" x 2-1/4", 3/4" throw
14-051 2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
14-050 3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4"
43-001 5" Backset extension link, Deadlatch
39-030
Rabbeted latch and strike kit, 605 and 626 only.
Adapts square corner latch and 2-3/4" square corner strike to
1/2" rabbeted door and frame.
no image available
Price Book 5
Effective August 12, 2017 • Rev. 08/17
84
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
Mortise Lock Armor Front (Mortise/Mortise Deadbolt Chassis)
09-663 1-1/4" Wide Square Corner, Latch for MS
09-669 1-1/16" Wide Square Corner, Latch, options for MS
09-666 1-1/4" Wide Square Corner, Latch x Deadbolt for MD
09-672 1-1/16" Wide Square Corner, Latch x Deadbolt, Options for MD
Notes: 30. For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE), use 1-1/4" wide armor front
31. Available finishes are 605, 606, 612, 619, 625, and 626.
32. Images not shown to scale. Consult AD-Series Parts Guide for more information.
1-1/4" Wide
1-1/4" Wide
1-1/16" Wide
1-1/16" Wide
Price Book 5
Effective August 12, 2017 • Rev. 08/17 85
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
Strike Plate (Cylindrical Chassis)
10-025 1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8",
1-3/8" Lip available, must specify 1-3/8"
10-013 1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4",
1-1/2" Lip available, must specify 1-1/2" Lip
10-016 1-1/8" Lip, Square Corner, T-strike, deep box, re door latch
K510-066 Box for ANSI strike (Must be specic)
10-072 1-3/16" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-072 7/8", 1", 1-1/2", 1-3/4", or 2" Lip, 1-1/4" x 4-7/8", Square Corner, box
10-075 1/2" Rabbeted, For 1-3/4" thick doors, use wide armor front. For over 1-3/4" thick door extended equally (EE) use
1-1/4" wide armor front.
37-015 Strike Frame Reinforcer, specify 37-015
XL11-820 One hole for latching functions, RH & LHR doors Lip 1-3/16"
XL11-821 One hole for latching functions, LH & RHR doors Lip 1-3/16"
XQ07-351-134 Strike, ANSI, No Box, 1-1/4” x 4-7/8”, 1-3/4” Lip Length Image not
available
XQ03-494-134 Strike, Square Corner, T-strike, Box, 1-1/8” x 2-3/4”, 1-3/4” Lip Image not
available
Note: 33. XL11-820 & XL11-821 Extended lead time; contact customer service.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
86
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Door Thickness
1-3/4" 1-3/4"
1-3/8" 1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments)
Notes: 34. Door Thickness Kits are available on page 215 to install a lock on a door that is thicker or thinner than 1-3/4".
See AD-Series Parts guide for details. Locks cannot be installed on doors thicker than 2-3/4" or thinner than 1-3/8".
35. Thin Door Shims are available on page 215 to install a lock on a door that is thinner than 1-3/4".
36. Decorative Plates are used to cover exposed holes when retrofitting from existing locks to AD-Series locks.
The size of plate required will vary based on the size and location of holes being covered.
Retrofit information can be found at www.schlage.com/support.
37. If under the lock decorative plates are on both sides of device, then door will become 1/8" thicker.
A Door Thickness Kit of an incremental 1/8" must be ordered to accommodate under the lock plates.
Price Book 5
Effective August 12, 2017 • Rev. 08/17 87
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
System Architecture for AD-300 & AD-400
The AD-Series combines all the hardware components required at the door for a complete access control system into one integrated design to
simplify installation. This includes the electried lock, credential reader, request-to-exit and -enter sensors, door position switch, tamper guard and
more.
The AD-Series is available with exible hardwired and wireless networked options and can accommodate Wiegand, Clock & Data or RS485
connections to the access control panel or reader interface board.
The following system congurations should be utilized as a guideline for specifying the AD-Series. Datasheets with technical specications are
available for download on www.schlage.com/support. We suggest that you consult with your Access Control Provider to verify the specic features,
functions and capabilities of the AD-Series.
Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provides for details.
• PIM400-TD2 required for Wiegand or Clock & Data connection; supports up to 2 AD-400 devices
• If RS485 connection to other ACP is required , contact software provider
Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provides for details.
• PIB300-2D required for Wiegand or Clock & Data connection; supports up to 2 AD-300 devices
AD-300 Networked Hardwired Solution:
AD-400 Networked Wireless Solution:
Access Control
Management System
Access
Control Panel
(ACP)
Panel Interface
Board (PIB300-2D)
Wiegand or
Clock & Data
Directly communicates
via RS485
RS485 AD-300
AD-300
System Conguration
Access Control
Management System
Access
Control Panel
(ACP)
Access
Control Panel
(ACP)
AD-400
(up to 2 devices)
Panel Interface
Module (PIM400-TD2)
AD-400
(up to 16 devices)
Panel Interface
Module (PIM400-485)
RS485
Wiegand or
Clock & Data
AD-Series Networked
Price Book 5
Effective August 12, 2017 • Rev. 08/17
88
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked
Access Control
Management System
Access
Control Panel
(ACP)
Panel Interface
Board (PIB300-2D)
Wiegand
RS485 AD-301
System Architecture for AD-301 & AD-401
FIPS 201 Overview
• Federal Government Standard for secure and reliable form of identication
• Mandated by Homeland Security Presidential Directive 12 (HSPD 12)
• Required for all Federal Government employees and contractors
• Mandates the type of Smart Card and Card Reader per application
• The WPR401 (wireless portable reader) is available for remote credential verication
In order to meet requirements, the AD-Series can either be:
1.) Sold as a complete unit with the FMK Multi-Technology + Keypad Reader
2.) Field upgraded to a FIPS 201-1 compliant solution by adding the FMK reader (sold separately) and by utilizing the most current rmware available.
AD-301 Hardwired FIPS 201-1 compliant solution
RS-485 or Wiegand communication to access control panel (ACP must be FIPS 201-1 compliant)
FIPS 201-1 Multi-Technology Reader (FMK)
Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provider for details.
PIB300-2D required for Wiegand or Clock & Data connection; supports up to 2 AD-301 devices.
AD-401 Wireless FIPS 201-1 compliant solution
900 MHz communication between lock and PIM400-TD2
FIPS Multi-Technology Reader (FMK)
Connections other than Wiegand or Clock & Data may incur an additional fee. Consult access control software provider for details.
PIM400-TD2 required for Wiegand or Clock & Data connection; supports up to 2 AD-401 devices.
f RS485 connection to ACP is required, contact software provider
Access Control
Management System
Access Control
Panel (ACP)
Access Control Panel
(ACP)
AD-401
(up to 2 devices)
AD-401
(up to 16 devices)
Panel Interface
Module
(PIM400-485)
RS485
Wiegand or
Clock & Data
Panel Interface
Module
(PIM400-TD2)
Price Book 5
Effective August 12, 2017 • Rev. 08/17 89
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
AD-Series Networked Locks - Ordering Guide
Quantity
1. Series
2. Class
3. Chassis1
4. Function2
5. Reader3
6. Lever
7. Finish
8. Cylinder
9. Keyway
10. Handing
11. Battery4
12. Backset & Latch5
or Armor Front6
13. Strike7
14. Door Thickness8
15. Options
Ex. 1 AD 400 CY 70 KP SPA 626 PD S123 RH 4B 13-049 10-025 1-3/4 BAA
Please complete all information above and email order to:
Order_Entry_Schlage_Commercial@allegion.com
1 If Exit trim is chosen, no selections are required for options #12 & #13
2 Function: 70 classroom storeroom is standard if no selection is made
3 Reader: KP keypad is standard if no selection is made
4 Battery: Cover only standard for AD-300, 4B standard if no selection is made for AD-400
5 Backset & Latch: 13-049 standard for cylindrical if no selection is made
6 Armor Front: 09-663 standard for mortise if no selection is made, 09-666 standard for mortise deadbolt if no selection is made
7 Strike Plate: 10-025 standard for cylindrical if no selection is made, 10-072 standard for mortise/mortise deadbolt if no selection is made
8 Door Thickness: 1-3/4" standard if no selection is made
Customer Name:
Customer Address:
Ship To:
Account #:
Quote #:
PO # & Date:
Price book #:
Shipping Instructions:
Requested Ship Date:
Order Written By:
For Further Information Contact
(Name, Phone, Fax)
Price Book 5
Effective August 12, 2017 • Rev. 08/17
90
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
AD-300 Networked Hardwired - Cylindrical
5. Select Reader Note: Reflects list price adder to base keypad reader price of $489.00.
LLL Less Reader (For reader module accessories sold separately, see page 156) DEDUCT $489.00
KP Keypad STANDARD
MS Magnetic Stripe (Swipe) $91.10
MSK Magnetic Stripe (Swipe) + Keypad $151.00
MG Magnetic Stripe (Insert) $106.00
MGK Magnetic Stripe (Insert) + Keypad $168.00
MT Multi-Technology | Proximity and Smart Card $181.00
MTK Multi-Technology + Keypad | Proximity and Smart Card $240.00
FIPS 201-1 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most
current firmware available. See page 156 for the FMK reader module.
6. Select Lever*
LLL Less interior and exterior levers DEDUCT $42.30
SPA Sparta N/C
RHO Rhodes N/C
ATH Athens N/C
TLR Tubular N/C
* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $41.60 per lever.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
7. Select Finish
626 Satin Chrome N/C
605 Bright Brass $127.00
606 Satin Brass $127.00
612 Satin Bronze $127.00
619 Satin Nickel $127.00
625 Bright Chrome $127.00
643e Aged Bronze $127.00
626AM Satin Chrome Antimicrobial $164.00
8. Select Cylinder Type
PD ÅrWith Cylinder, Schlage- (Everest 29 S123, 6 Pin KIL standard) N/C
LD Less Cylinder, Schlage, Falcon, 6 Pin KIL DEDUCT $58.00
RD ţ With Cylinder, Schlage 6-Pin (Everest 29 S123 standard) FSIC $35.00
JD Less Cylinder, Schlage, 6 Pin FSIC DEDUCT $32.00
GD ţ
With Cylinder, Schlage 7-Pin (Everest 29R standard) (factory master keyed only)
SFIC N/C
BD Less Cylinder, Schlage, Falcon, Competitive OEM's, 7 Pin (SFIC) N/C
LD SAR Less Cylinder, Sargent (10L + 11L), 6 Pin KIL DEDUCT $58.00
JD SAR Less Cylinder, Sargent 6300, 6 Pin FSIC DEDUCT $32.00
JD CO6 Less Cylinder, Corbin 8000, 6 Pin FSIC DEDUCT $32.00
JD C07 Less Cylinder, Corbin 8000-7, 7 Pin FSIC, (Only RHO, 8RO, SPA, 8SP, TLR and 8TR) DEDUCT $32.00
JD MED Less Cylinder, Medeco 32*0201, 6 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles) DEDUCT $32.00
JD YA6 Less Cylinder, Yale 1210 or Medeco 31*0100, 6 Pin FSIC DEDUCT $32.00
JD YA7 Less Cylinder, Yale 1220, 7 Pin FSIC (Only RHO, 8RO, SPA, 8SP lever styles) DEDUCT $32.00
LD FA7 Less Cylinder, Falcon, 7 Pin, KIL (Only RHO, 8RO, SPA, 8SP lever styles) DEDUCT $32.00
Å Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which
should accompany the master keyed order, see page 283.
r For Master Keying, additional line item 50-210 is required, $18.30 each.
£ Control Keys for installation/removal of interchangeable cores are not furnished and must be ordered separate.
For additional assistance on Master Keying as well as restricted keyways please contact customer service.
1-4. Select Chassis/Function Note: Locking function capabilities are determined by users access control system
AD-300-CY-70* Classroom/Storeroom $1,684.00
AD-300-CY-50* Ofce r$1,694.00
AD-300-CY-40 Privacy r$1,694.00
AD-300-CY-60 Apartment r$1,694.00
* Less Door Position Switch, use suffix LDP. Deduct $17.70
r Requires RS485 connection to ACP. See page 87 for system diagram. Check with access control software provider to verify function is enabled.
MTK
MS
MSK
FMK
MGK
KP
MG
AD-300-CY-70-MT
Price Book 5
Effective August 12, 2017 • Rev. 08/17 91
StandaloneNetworked
AD-SERIES
Pricing/product description subject to change without notice.
AD-300 Networked Hardwired - Cylindrical
9. Select Keying Type
Open Keyway Families: KIL or FSIC2
S123 Everest 29 S (Key in Lever or FSIC) STANDARD
C/CE/E/EF/ F/ FG/ G Classic Obverse N/C
Restricted Keyway Families: KIL or FSIC1, 2
29 T Everest 29 T $16.00
DEverest D $16.00
Classic Restricted Quad, Numbered, Reverse $16.00
Restricted Keyway Families: SFIC3
29R Everest 29 R $77.00
BEverest B $77.00
1. Everest Restricted Keyways require a Letter of Authorization to be submitted with the order. See sample Letter of Authorization,
see page 295.
2. Full Size key systems (Everest 29 S & T, Everest C & D, Obverse & Quad) are available in Primus and Primus XP key system and must be
ordered separately. Lock should be ordered less cylinder and Primus cylinder should be a separate line.
3. Master Keyed cylinders can be specified and will be shipped in lock packaging. For Master Keying System Summary form which should
accompany the master keyed order, see page 283.
10. Select Handing (Field Reversible)
RH Right Handed N/C
LH Left Handed N/C
RHR Right Handed Reverse N/C
LHR Left Handed Reverse N/C
11. Select Battery
Cover Only No batteries or holder STANDARD
12. Select Backset & Latchbolt
LLL Less Latch DEDUCT $31.20
13-049 2-3/4" Backset, Deadlatch, Square corner, 1-1/8" x 2-1/4" STANDARD
14-049 2-3/4" Backset, Deadlatch Anti-friction re door latch, Square corner,
1-1/8" x 2-1/4", 3/4" throw
$165.00
14-051 2-3/8" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4" N/C
14-050 3-3/4" Backset, Deadlatch Square corner, 1-1/8" x 2-1/4" $9.80
43-001 5" Backset extension link, Deadlatch $30.10
39-030* Rabbeted latch and strike kit, 605 and 626 only $53.00
* Adapts square corner latch and 2-3/4" square corner strike to 1/2" rabbeted door and frame.
13. Select Strike Plate
LLL Less Strike Plate DEDUCT $4.10
10-025 1-3/16" Lip, ANSI, no box, 1-1/14" x 4-7/8" STANDARD
10-013** 1-1/8" Lip, Square Corner, T-strike, box, 1-1/8" - 2-3/4" N/C
10-016 1-1/8" Lip, Square Corner, T-strike, deep box, re door latch $14.30
K510-066 Box for ANSI strike (Must be specic) N/C
** 1-1/2" Lip available, must specify 1-1/2" Lip $7.30
14. Select Door Thickness
134 1-3/4" STANDARD
Example 138 1-3/8" to 2-3/4", Shims included (Specify in 1/8" increments) $53.70
15. Select Options
BAA BAA Compliant Product $105.00
BAA compliant products must have the cover letter on page 301 included with the order. Failure to use this cover letter will result in the
customer receiving non-BAA compliant product with no recourse for an RMA or refund. BAA compliant product requires a longer lead
time, please contact customer service for details.
Small Format
Interchangeable Core
GD BD
Full Size
Interchangeable Core
RD JD JD SAR JD CO6 JD YA6
JD C07
Full Cylinder
PD LD LD SAR LD FA7
Notes: 1) Connections other than Wiegand or Clock & Data may incur additional fee. Consult access control software provider for details.
2) Add PIB300-2D if Wiegand or Clock and Data connection to ACP is required. Sold Separately. See page 118 for details.
Accessories available, see pages 116-119.
Accessories include Panel Interface Board (PIB300-2D) Decorative Plates, Handheld Device, etc.
Credentials available, see pages 26-31.
92
Standalone Networked AD-SERIES
Pricing/product description subject to change without notice.
Price Book 5
Effective August 12, 2017 • Rev. 08/17
AD-300 Networked Hardwired - Mortise/Mortise Deadbolt
4. Select Function Note: Locking function capabilities are determined by users access control system
70* Classroom/Storeroom (Not available on mortise deadbolt) STANDARD
50* Ofce r (Not available on mortise deadbolt) $10.00
40 Privacy r$10.00
60 Apartment r$10.00
* Less Door Position Switch, use suffix LDP. Deduct $17.70
r Requires RS485 connection to ACP. See page 87 for system diagram. Check with access control software provider to verify function
is enabled.
5. Select Reader Note: Reflects list price adder to base keypad reader price of $489.00.
LLL Less Reader (For reader module accessories sold separately, see page 156) DEDUCT $489.00
KP Keypad STANDARD
MS Magnetic Stripe (Swipe) $91.10
MSK Magnetic Stripe (Swipe) + Keypad $151.00
MG Magnetic Stripe (Insert) $106.00
MGK Magnetic Stripe (Insert) + Keypad $168.00
MT Multi-Technology | Proximity and Smart Card $181.00
MTK Multi-Technology + Keypad | Proximity and Smart Card $240.00
FIPS 201-1 Compliant when applied with the FIPS Multi-Technology plus keypad reader module (FMK) and by utilizing the most current
firmware available. See page 156 for the FMK reader module.
6. Select Lever*
LLL Less interior and exterior levers DEDUCT $59.20
SPA Sparta N/C
RHO Rhodes N/C
ATH Athens N/C
TLR Tubular N/C
* Tactile Warning use 8AT for Athens, 8RO for Rhodes, 8SP for Sparta and 8TR for Tubular. $41.60 per lever.
Applied to exterior lever only unless otherwise specified. Not available with 643e finish.
7. Select Finish
626