Schlage 2020 Price Book (Effective 4/4/20) PB8
User Manual: Schlage 2020 Schlage Price Book (Effective 4/4/20) Price Book
Open the PDF directly: View PDF 
.
Page Count: 446
| Download | |
| Open PDF In Browser | View PDF |
Click next for quick tips on how to navigate Allegion Price Books quicker! Price book 8 Effective April 4, 2020 • Rev. 04/20 This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice. Administrative Offices Allegion Administrative Office 11819 N. Pennsylvania St. Carmel, IN 46032 allegion.com/us Placing orders You can place orders with Allegion via the fax numbers or emails listed below: Mechanical Locks & Key Systems Fax#: 1-800-452-0665 Email: Order_Entry_Schlage_Commercial@allegion.com Residential Locks Fax#: 1-800-366-5625 Email: Res_Contact_Center@allegion.com FastTrack Fax#: 1-800-288-4242 Email: Order_Fasttrack@allegion.com Customer Care Our Customer Care Representatives are available for questions or assistance. You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for RSO) or through the email addresses listed below: Sales Support support@allegion.com Technical Product Support Mechanical Locks/Keying Systems Mechanical_Locks_TechProdSupport@allegion.com Request for Quote Carolinas (North Carolina, South Carolina, Virginia) Carolinas.Quotes@allegion.com Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) Central.Quotes@allegion.com Chicago (Illinois-Northern, Wisconsin) Chicago.Quotes@allegion.com Florida Florida.Quotes@allegion.com Great Lakes (New York, Pennsylvania) GreatLakes.Quotes@allegion.com Metro New York Metro.Quotes@allegion.com Michigan Michigan.Quotes@allegion.com Mid Atlantic North (New York, Pennsylvania) Mid.Atlantics.north.quotes@allegion.com North Central (Minnesota, North Dakota, South Dakota) NorthCentral.Quotes@allegion.com Northern California NoCal.Quotes@allegion.com Mid Atlantic South (Delware, Maryland, New Jersey) Mid.Atlantics.south.quotes@allegion.com Northwest (Alaska, Oregon, Washington) Northwest.Quotes@allegion.com Midwest (Indiana, Kentucky, Ohio, West Virginia) Midwest.Quotes@allegion.com South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) South.Quotes@allegion.com Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) Mtn.States.Quotes@allegion.com New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) NewEngland.Quotes@allegion.com Southern California (California-Southern, Hawaii) SoCal.Quotes@allegion.com Southwest (Arizona, New Mexico) Southwest.Quotes@allegion.com Texas Texas.Quotes@allegion.com Price Book 8 2 Effective April 4, 2020 • Rev. 04/20 Table of Contents Terms & Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-28 Allegion General Terms & Conditions...........................10 Schlage Standard Terms..................................................14 Product Warranties............................................................17 Commercial Applications.................................................17 Residential Applications...................................................17 Distributor Function and Location Policy....................18 Distributor Function and Location Policy....................20 Cylinder Policies...................................................................21 Primus® Sales Policy.........................................................21 Everest® Sales Policy........................................................21 Everest Small Format Interchangeable.......................21 Core Key Control Policies..................................................21 Restricted Keyway Policy.................................................21 Construction Core Program Policy.................................21 Master Key Shipment Policy...........................................23 Hardware Finishes..............................................................24 Forms & Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-56 How To Order.......................................................................30 Ordering Examples.............................................................31 Order Forms..........................................................................32 Using Order Forms..............................................................33 Sequential List of Order Forms.......................................34 CYLINDRICAL 57-129 A-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-70 Functions...............................................................................60 Complete Locks...................................................................61 Options...................................................................................63 Parts........................................................................................65 AL-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-84 Functions...............................................................................74 Complete Locks...................................................................75 Options...................................................................................77 Parts........................................................................................79 ALX-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-98 Functions...............................................................................88 Complete Locks...................................................................89 Kit Systems...........................................................................91 Parts........................................................................................93 D-Series Knobs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-110 Functions...............................................................................102 Complete Locks...................................................................103 Options...................................................................................105 Parts........................................................................................106 ND-Series Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111-130 Functions...............................................................................114 Complete Locks...................................................................117 Options...................................................................................119 Conversion Guide.................................................................122 Parts........................................................................................124 DEADBOLT 131-164 B250-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131-140 Functions...............................................................................134 Complete Locks...................................................................135 Options...................................................................................136 Parts........................................................................................137 B500-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-152 Functions...............................................................................144 Complete Locks...................................................................145 Options...................................................................................147 Parts........................................................................................148 B600-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153-164 Functions...............................................................................156 Complete Locks...................................................................157 Options...................................................................................159 Parts........................................................................................160 MORTISE 165-212 L-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165-212 Functions...............................................................................168 Complete Locks...................................................................176 Options...................................................................................188 Distributor Pack Program.................................................194 Parts........................................................................................198 Price Book 8 Effective April 4, 2020 • Rev. 04/20 3 Table of Contents MULTIPOINT 213-236 CYLINDRICAL / KEYS / AUXILIARY LM9200-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213-236 Functions...............................................................................216 Complete Locks...................................................................218 Options...................................................................................226 Parts........................................................................................229 INTERCONNECTED 237-256 CS210-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237-246 Functions...............................................................................240 Complete Locks...................................................................241 Options...................................................................................244 Parts........................................................................................245 S200-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247-256 Functions...............................................................................250 Complete Locks...................................................................251 Options...................................................................................253 Parts........................................................................................254 TUBULAR 257-276 LT-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257-266 Functions...............................................................................260 Complete Locks...................................................................261 Options...................................................................................264 Parts........................................................................................265 S-Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267-276 Functions...............................................................................270 Complete Locks...................................................................271 Options...................................................................................273 Parts........................................................................................274 SPECIALTY 277-288 HL-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277-288 Functions...............................................................................280 Parts........................................................................................285 PORTABLE SECURITY TOOLS AND KITS 289-300 Portable Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289-300 Key-in-Lever with Cylinder...............................................292 Key-in-Lever Less Cylinder...............................................293 SFIC Less Cylinder...............................................................294 Full Size IC Core....................................................................295 Custom Engraving Brass Padlocks and Chrome Plated Brass Padlocks.......................................296 Special Security...................................................................298 415-428 Tools & Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 415-424 Keying Tools & Kits............................................................416 Tools.......................................................................................419 Kits...........................................................................................421 Merchandising Aids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425-428 Display Mounts....................................................................426 Miscellaneous.......................................................................428 PARTS INDEX 429 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429-443 Price Book 8 4 301-414 Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301-358 Multiple Tailpiece Cylinders.............................................304 Bulk Pack Cylinders............................................................305 Unassembled Multiple Tailpiece Cylinders.................306 Bulk Pack Cylinders............................................................307 Primus Cylinders-Sub Assembled..................................309 A & H, AD, AL CL, D, ND, F, FA, PL, S & S200..............310 B500.......................................................................................318 B250, B400, E/B, F100, H, MD, S200...........................320 B600/700/800...................................................................324 Mortise....................................................................................328 Schlage cylinders for Falcon & Von Duprin.................339 Rim Cylinders........................................................................341 Interchangeable Cores......................................................343 Competitor Retrofit Cylinders.........................................345 Mailbox...................................................................................350 Special Cylinders.................................................................351 Pins, Springs & Pinning Compoents..............................352 Plugs.......................................................................................355 Shells......................................................................................358 Keys & Keying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359-406 Keys Ordered Separately..................................................362 Key Stamping.......................................................................377 Cylinder Stamping..............................................................378 Construction Core Program..............................................379 Keying Charges....................................................................381 Sitemaster 200®................................................................386 CL-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407-414 Complete Locks...................................................................410 Options...................................................................................413 Parts........................................................................................414 Effective April 4, 2020 • Rev. 04/20 How to Use the Price Book Residential Keys Commercial Products * Ordering Options Form Name and Number Notes 1. Standard Orders These orders are for the comprehensive listing of the current product offering shown in this price book. Your Purchase Order See information required on your order in “Forms & Examples” price book tab. All orders will be processed based on normal factory lead times. An anticipated ship date will be included with each order acknowledgement. 2. Schlage Innovation Center Orders (RFQ) These orders are for Request For Quote (RFQ) orders which are not covered in the price book and are subject to longer lead times. These orders may not be combined with any Master Keyed or Non-Master Keyed products. Use this process for custom logo requests. Schlage Innovations Center Product Request Form See the “Innovation Center Product Request Process” on Page 6. These products are not in the price book and must be requested for consideration. Instructions are included in the Innovations Center Product Request Process in this section. Refer to FastTrack price book. See current FastTrack price book. Phone number 1-877-671-7011 or fax number 1-800-288-4242. 1. Master Keyed Orders These orders are subject to standard lead time and process. Please attach the necessary forms if a restricted key system or Primus order. Master Keyed Order Form ms-i100.01 Rev. 3/14 ms-i100.02 Rev. 3/14 ms-i150 Rev. 3/14 Use of order forms other than Schlage order forms can result in an increased lead time. An anticipated ship date will be included with each order acknowledgement. 2. Non-Master Keyed Orders These orders are subject to standard lead time and process. If you are ordering a restricted key system or Primus order, please attach the necessary forms. Non-Master Keyed Order Form ms-i250 Rev. 3/14 ms-i300 Rev. 3/14 Use of order forms other than Schlage order forms can result in an increased lead time. 3. Primus Face Sheet Original signed form must accompany any Primus or Primus XP level 3, 4, or 9 order. Primus Face Sheet ms-e120 Rev. 3/14 Must submit original forms, copies are not accepted. 4. Primus Signature Card Original signed form must accompany any NEW Primus or Primus XP level 3, 4, or 9 order. Primus Signature Form ms-e130 Rev. 03/14 Please make sure the form identifies the key system as NEW or EXISTING If removeable cores, make sure control keys are ordered. Do not forget to mark the type of keys, stamping information, etc. 5. Key System Summary Please fill in all appropriate fields. Contact your local RSO sales office for help. Key System Summary ms-i200 Rev. 3/14 All 4 Pages All orders will be processed based on normal factory lead times. An anticipated ship date will be included with each order acknowledgement. 1. Standard Order Plan All residential Schlage, and Dexter by Schlage products currently listed in this price book. Your Purchase Order see information required on your order in “Forms & Examples” price book tab. All orders will be processed based on normal factory lead times. An anticipated ship date will be included with each order acknowledgement. 3. FastTrack Orders These orders are for products in the FastTrack price book and qualify for expedited order processing. This program includes Schlage and Allegion brand products. Please consult your sales representative for FastTrack program availability in your area. Price Book 8 Effective April 4, 2020 • Rev. 04/20 5 How to Use the Price Book Standard Products In each tabbed section of this Price Book you will find a comprehensive listing of our current offering per product series. Products should be ordered via the traditional method by designating the product, design, finish, handing, and options for each line item (refer to “How to Order” in the Forms & Examples section of the price book). All orders will be processed based on normal factory lead times. These lead times vary throughout the year and are affected by production volumes, supplier schedules and quantity demands. An anticipated ship date will be included with each order acknowledgement. Some of the products listed in these sections require extended lead times. You will find the hourglass symbol (6) associated with products that require extended lead times so that you are aware of this condition prior to placing your order. Products included in this classification are those items that represent a unique combination of product attributes (i.e. finish, trim, function, etc.) that typically require additional manufacturing care and attention. Products marked “6” will routinely exceed normal factory lead times and anticipated ship dates will be indicated with each order acknowledgement. Schlage Innovation Center Product Request Process Schlage Innovation Products are products that are not in the price book and are formally requested through the Schlage Innovation Center Product Request Process. Examples of these products include: · Products which at one time were offered for sale by Schlage but are no longer available in the current price book. · Finishes not listed as standard for a product in the price book. · “True” custom products, which are new variations on current or past products. · Custom logo requests. How to Request a Quote for a Custom Lock Product • Custom lock products can only be ordered by and shipped to current Allegion Channel Partners · Innovation Center Product Request Form can be obtained by: - Sending an email request to Mechanical_Locks_TechProdSupport@allegion.com - Searching Knowledge Center tool at http://kc.allegion.com/ for Innovation Center Product Request Form - Contact Schlage Product Support at 877-671-7011, option 2, option 1 · Send the completed request form to Mechanical_Locks_TechProdSupport@allegion.com · Upon receipt the Innovation Center Product Request Form coordinator will assign an RFQ#, review, and clarify the request as needed · Within 5-working days your request will be either denied or approved - If approved, Schlage will communicate the RFQ#, NET pricing, and lead time - If denied you will be notified with an explanation · RFQ# is valid for 6 months · To place an order submit the approved RFQ form and purchase order with the RFQ# prominently displayed to Order_Entry_Schlage_Commercial@allegion.com · Changes to the original request after a quote approval may incur additional charges and affect lead time - Prior to PO submittal send all change requests to Mechanical_Locks_TechProdSupport@allegion.com · RFQ items must be ordered on a separate stand-alone purchase order and cannot be on an order with NON-RFQ items For additional information, please contact Technical Product Support at 877-671-7011. Price Book 8 6 Effective April 4, 2020 • Rev. 04/20 How to Use the Price Book Commercial Master Keyed Orders MASTER KEYED ORDERS LEAD TIMES Schlage Forms (MS-I200, MS-I100, MS-I150) Non-Schlage Forms Factory Lead Time Extended Lead Time Additional 5 Working Days Minimum In an effort to expedite the process of managing our growing volume of Master Keyed order requests, Master Keyed orders submitted in the following choice of formats will receive factory lead times based on the following criteria: • Orders submitted on the Key System Summary form (MS-I200) and the Master Keyed Order forms (MS-I100 and MS-I150) OR • Orders submitted on the Key System Summary form (MS-I200) and your purchase order with information specified in the following sequence: Qty Product Design Door Detail Information Finish Hand Latch Strike DHI Key Symbol Add’l Details Lead times for Master Keyed orders in any other format will be extended at least 5 additional working days. In all cases, allow additional lead time for clarifications and complex keying requirements. The Master Keyed order forms are located in the Forms & Examples/Keys and Keying sections of the price book. For your convenience you can download the Master Keyed order forms from our web site at allegion.com/us Residential Keying Residential Master Key (RMK): RMK is a single key that will grant access to all opening with in the facility (i.e. master key). Additionally, each tenant would need to be provided with a key that will grant them access to their apartment only. The same keying situation would exist in any form of a multi family housing complex. Residential Construction Keying (RCK): RCK (also referred to as loss ball) by design allows the use of a temporary master key during the construction phase of a project. At the end of the construction phase, the use of the homeowner key will trigger the lost ball construction device, thus eliminating the temporary master key used during construction. Price Book 8 Effective April 4, 2020 • Rev. 04/20 7 Notes Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified with “C” keyway and KD or 0-bitted will receive 6 pin cylinders. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $17.40 per cylinder. 17. Cut keys ordered with locks are priced according to appropriate extra cut key charge listed on page Keys-26 18. Grand master sections L, LP (Primus) and Y are supplied in stainless steel only and are recommended to be cut at the factory only 18. Stamping standards and charges are listed on page Keys-18 20. Keying services and associated charges are listed on page Keys-22 21. All Primus 1+ key orders must contain the locksmith ID 22. All restricted key orders are subject to the restricted keyway sales policies are listed in Terms & Conditions 23. For hotel function cylinders: Not available in Primus. Furnished 0-bitted. Emergency keys must be ordered separately. 24. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 8 Effective April 4, 2020 • Rev. 04/20 Introduction TERMS & CONDITIONS TERMS & CONDITIONS / FORMS & EXAMPLES Table of Contents General Terms and Conditions for Sales and Service Terms-2 Standard Schlage Product Terms and Conditions Terms-6 Product Warranties Terms-9 Commercial Applications. . . . . . . . . . . . . . . . . . Terms-9 Distributor Function and Location Policy Terms-10 Terms-11 Cylinder Policies Schlage Key Systems. . . . . . . . . . . . . . . . . . . . . . Terms-11 Restricted Keyway Policy. . . . . . . . . . . . . . . . . . Terms-12 Construction Core Program Policy. . . . . . . . . Terms-13 Primus® Sales Policy . . . . . . . . . . . . . . . . . . . . . . Terms-13 Terms-15 Master Key Shipment Policy Hardware Finishes Terms-16 Forms and Examples How To Order Terms-1 Forms & Examples Price Book 8 Effective April 4, 2020 • Rev. 04/20 9 Forms & Examples Terms-2 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS Allegion General Terms and Conditions of Sale and Service 1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason. 2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number, invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number, and (vii) not combine buying program and quoted product on the same order. b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. Orders that combine buying program and quoted product on the same order will be routed back to your local RSO office in order to review subject purchase order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service. g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. 3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Company’s Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time Company receives the order. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. Credits for U.S. sales tax applied to invoices will only be granted if valid exemption documentation is provided within 30-days of the invoice date and a case is initiated by customer service. Exemption documentation may be emailed to sales.tax.certificates@allegion.com, this e-mail address cannot be used to request a credit for sales tax charged all such requests must be made with customer service. All certificates sent to the e-mail address must include the following information: (1) Customer account number(s); (2) Customer name; and (3) Allegion brand(s) the certificate should be applied to. c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date (subject to any early pay discounts that may be offered to Customer by Company in its sole discretion). Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of collection, including, without limitation, reasonable attorneys’ fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges. 4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project. b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company’s acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer’s ability to distribute Company’s products. 5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer’s rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables. 6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer’s payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment. 7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors’ needs. Company may implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to comply with such program(s) will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer’s ability to distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company’s instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/ or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors. 8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable. 9. INSPECTION AND DELIVERY. a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company’s facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affected thereby. Price Book 8 10 Effective April 4, 2020 • Rev. 04/20 TERMS & CONDITIONS 13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement. 14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company. 15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization (“RMA”) number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns, a credit in the amount of the original purchase price will only be issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns/convenience returns, in the event Company approves such a return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit will be made to Customer’s account in the amount of the original purchase price less freight and a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer’s inventory less than 180 days from the date of shipment by the Company, and not ordered as part of a master key solution may be considered by Company for return. Such credit will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company’s inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason. 16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer’s risk. c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company. 19. LIMITATION OF REMEDIES. CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE. 20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, “Damages”), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers, directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by Price Book 8 Effective April 4, 2020 • Rev. 04/20 11 Forms & Examples 12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties. 18. LIMITED WARRANTY. COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company’s published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer. b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company’s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance. c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company’s written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer. d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship. Terms-3 11. SHIPPING. a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Company’s Freight Shipping Guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price. d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the Company, a purchase order cannot be combined with any other order to increase average order size as it relates to Company’s Freight Shipping Guidelines. However, for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day Program (available for Ives products); or ProExpress (available for specific product lines stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von Duprin products), the applicable brands or product categories may, subject to certain order requirements identified by Company, be combined on a single order to increase average order size used in Company’s Freight Shipping Guidelines. 17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer’s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer’s business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company’s trademarks or names will be immediately discontinued. TERMS & CONDITIONS / FORMS & EXAMPLES 10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin, Company’s factory”; and (ii) where the Customer is located outside of the United States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company’s request. Forms & Examples Terms-4 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker’s compensation act, disability or other employee benefit act, or insurance coverage. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection with the foregoing. c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement. 21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable. 22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN. 23. CONSUMER PRODUCTS WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSONMOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION. 24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company’s control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company’s performance will be deemed adjusted to that effect. 25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto. 26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order. 27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer’s financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer’s business or financial condition. If Company determines, in its sole discretion, that Customer’s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above. Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement. In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer. No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable. 28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable. 29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement. 30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement. 31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party. 32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company’s representatives, shall not constitute a signed writing. 33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable. b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or Price Book 8 12 Effective April 4, 2020 • Rev. 04/20 TERMS & CONDITIONS 36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee. 37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spinoff, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee. 38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect. 39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision. 40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation; Price Book 8 Effective April 4, 2020 • Rev. 04/20 13 Forms & Examples 35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party. DEFINITIONS. Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement. “Agreement” means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein. “Affiliate” means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term “control” (including the terms “controlled by” and “under common control with”) means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. “Business Day” means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. “Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement. “Company Marks” refers to the Marks of Company. “Confidential Information” shall mean any and all information provided by either party to the other party pertaining to the disclosing party’s business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as “confidential.” For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company’s facilities, shall be considered “Confidential Information” under this Agreement. “Content” means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials. “Customer” means the purchaser of Deliverables from Company. “Deliverables” means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service. “End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division. “IP” means all intellectual property and industrial property rights comprising or relating to/ of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world. “Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks. “Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement. “Patents” means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor’s certificates, petty patents and patent utility models). “Person” means a person or entity. “Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being purchased by Customer. “Trade Secrets” means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering. Terms-5 34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder. (d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner. TERMS & CONDITIONS / FORMS & EXAMPLES to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE. c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article. d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company’s sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company’s Ethics & Compliance Group. e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement. f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Forms & Examples Terms-6 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS • Standard Schlage Product Terms and Conditions Commercial The following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products identified in this Price Book. This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice. All prices may be subject to discount. Contact Customer Care for clarification. Minimum Order Size for Channel Discount: All orders less than $500.00 list shall be discounted at book net. Claims and Returns: Claims and Returns: Due to Schlage error: Due to Customer error: • Claims for shortages and/or incorrectly filled orders must be filed with Customer Service within 30-days of receipt of material. • Incorrect order acknowledgments must be changed by emailing request to Customer Care territory email box upon receipt of acknowledgment. Refer to inside cover of this book. • Invoice adjustments must be faxed to Credit Adjustments @ (317) 810-3048 within 30-days of receipt of invoice. • Returned goods will not be accepted without prior written approval from Schlage. Credit will be based upon the Return Material Authorization (RMA) issued by Customer Service or the Allegion Consultant and final acceptance by Schlage. Returns must be prominently marked with the RMA number and follow return guidelines on the RMA form. • Product considered being defective after review by the Allegion Consultant must be returned to the Schlage Lock Company facility in Security, Colorado accompanied by an RMA. Replacement orders for defective product will be entered by Customer Service at the time of notification. • It is the policy of the Schlage Lock Company to not accept returns of any materials that are correctly furnished as per the dealer’s purchase order. • Return of product due to customer order error or accommodation must be pre-arranged with the Allegion Consultant and approved by Business Unit Manager. • Returns are subject to a minimum restocking charge of 35% for unopened cases. • Materials are not returnable. • Product must be received in original factory condition and certified as such by Schlage Receiving. Under no circumstances is Schlage liable for incidental or consequential damages. Charge-backs will not be allowed. Price Book 8 14 Effective April 4, 2020 • Rev. 04/20 Standard Schlage Product Terms and Conditions • TERMS & CONDITIONS TERMS & CONDITIONS / FORMS & EXAMPLES Commercial Delivery: Claims and Returns: For the following: Expect this delivery: Non-Master Keyed orders Factory items will individually be assigned ship dates based on current lead times. Master Keyed orders or Non-Master Keyed orders prominently marked on the order to “Ship Complete” The entire order will be assigned ship dates grouped by factory location. Items with longest current lead times determine ship date for other items from that location. Order Changes or Cancellations: Terms-7 All orders will be acknowledged with scheduled ship dates. Specific scheduled ship dates are not guaranteed by Schlage because of the nature of product, labor, availability of product or manufacturing conditions that might be beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowledged ship dates. Selected Products are available to specific channels of distribution for 1 and 5-day delivery through the Allegion FastTrack Program. The Allegion FastTrack Program is subject to separate terms and conditions. Type of Product 1. Change to: – Product, creating a different SKU number – Keying Not Accepted 2. Change to: – Increase quantity of existing item(s) – Add new item(s) Not Accepted – Delete item(s) – Cancel order 6 Extended Factory • OK within first 2-days from receipt of order. • If after 2-days, item must be deleted from order (see 3, 25% handling charge will apply) and entered as a new order (see 2). • OK within first 10-days from receipt of order. • If after 10-days, item must be deleted from order (see 3, 50% handling charge will apply) and entered as a new order (see 2). Lead Time items • New order with normal lead-time must be generated for additions. Same terms & conditions will be applied if requested so long as the original order has not been shipped. 3. Change to: – Reduce quantity of existing item(s) Normal Factory Lead Time items • Primus® Keys Forms & Examples Type of Change Not Accepted • Additions received after the original order ships must be entered as a new order and will stand-alone for lead-time and terms & conditions. • OK within first 2-days from receipt of order. • If after 2-days, subject o handling charge of 25% of the net price of the deleted item(s).** • OK within first 10-days from receipt of order. • If after 10-days, subject o handling charge of 50% of the net price of the deleted item(s).** * Includes any change to key symbol, door identification and/or cylinder pinning. ** Handling charges are billed on the original order. Notes: 1) Change orders must be emailed to your Customer Care territory email box. Please state change order request in subject line. For questions call (877) 671-7011. 2) Customer Care will acknowledge receipt of change orders and action taken. 3) Change orders resulting in handling charges require customer review prior to change being made. Price Book 8 Effective April 4, 2020 • Rev. 04/20 15 Forms & Examples Terms-8 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS • Standard Schlage Product Terms and Conditions Residential The following specific product terms and conditions supersede the general terms and conditions of sale and service only to the extent provided herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this price book will govern the sale of products identified in this price book. The price list in this price book supersedes and cancels all previous price lists contained in any other price books or versions thereafter. Prices shown are subject to change without notice. All prices are subject to discount. Contact customer service for clarification. Service Charges: Service charges on past due invoices (except validly disputed items) will be assessed as follows: 1 1/2% per month or the maximum allowable by law on past due amounts open as of the last day of each calendar month until the past due amounts are paid. Changes or Cancellations: Changes or cancellations to an order must be in writing and may result in additional charges for labor and/or materials. Changes may result in a delay in the scheduled ship date. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. Changes or deletions resulting in an order size of less than our minimum will not be accepted. Orders for non-cataloged, special or nonstandard items may not be canceled. Factory orders may not be changed within 7 days. Claims and Returns: Claims for shortages and/or incorrectly filled orders must be filed with Customer Service within 10 days of receipt of material. Price adjustments must also be made in writing to Customer Service within 30 days from receipt of invoice. No returned goods will be accepted without written approval from Schlage. Credit will be based upon the written authorization of the Schlage representative and final acceptance by Schlage. Such returns must be prominently marked with the return goods authorization number and shipped prepaid. Returns, if approved, will be subject to a minimum restocking charge of 35% for unopened cases received in the same condition as when sold by Schlage. Materials are not returnable. Charge-backs will not be allowed. Taxes: Prices do not include any present or future Federal, State or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Delivery: Orders will be assigned ship dates and acknowledged accordingly, based on estimates of availability of products. Specific scheduled ship dates are not guaranteed by Schlage because of the nature of product, labor, availability of material or manufacturing conditions that might be beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowledged ship dates. Certifications: Schlage products, as noted in our catalog, are produced and tested by independent laboratories for compliance with UL and ANSI standards. Any field modification or alteration of product will void certification. Copyright 2014, Allegion All rights reserved. Printed in U.S.A. Price Book 8 16 Effective April 4, 2020 • Rev. 04/20 Complete Locks • TERMS & CONDITIONS 3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty Schlage Lock Company, LLC (the “Company”) extends a three year limited mechanical warranty and one year limited electromechanical warranty to the original user of the products manufactured by the Company (the “Products”) against defects in material and workmanship from the date of purchase. Certain Products contain restrictions to this limited warranty, additional warranties, or different warranty periods. Please see below for specific Product warranty information. What The Company Will Do: Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and encumbrances and accompanied by the statement of defects of proof of purchase, the Company will replace the Product. Original User: These warranties only apply to the Original User of Products. These warranties are not transferable. What Is Not Covered: The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the Company; or (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained, repaired or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature, humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not disclose to the Company’s satisfaction non-conformance to the warranties. Additionally, the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in educational facilities and student housing. How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state. SPECIFIC PRODUCT WARRANTY RESTRICTIONS/ADDITIONAL WARRANTIES: ND-Series Levers 10-Year Mechanical Warranty The limited warranty is for a period of seven (7) years for products shipped prior to January 2012. 10-year for products shipped after January 2012. Everest 29, Everest 29 Primus, Everest 29 Primus XP, Everest, Everest Primus, and Everest Primus XP Limited Lifetime Key Breakage Warranty A limited lifetime warranty is provided to the original user against breakage and is subject to the restrictions of these limited warranties. Portable Security Limited Lifetime Warranty A limited lifetime warranty is provided to the original user and is subject to the restrictions of these limited warranties. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Product Warranties: Residential Applications Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics warranty to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus, finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage’s maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen. How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty. Price Book 8 Effective April 4, 2020 • Rev. 04/20 17 Forms & Examples Small Format Interchangeable Core (SFIC) Warranty The limited warranty also applies to Schlage locks and housings when used with another manufacturer’s cores, or to Schlage cores (i.e, SFIC) when used in another manufacturer’s locks and housings. The use of unauthorized cylinder cams or other components with the Products shall void these warranties. Terms-9 Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximum liability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by the Company may be brought by the Original User more than one (1) year after the cause of action has arisen. TERMS & CONDITIONS / FORMS & EXAMPLES Product Warranties: Commercial Applications Forms & Examples Terms-10 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS • Product Warranties and Distribution Policy Product Warranties: Residential Applications (Cont.) Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product’s performance, the Original User may simply contact Schlage Customer Service at 888-805-9837 in the U.S. and Canada or 800-506-7866 in Mexico for assistance. Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage. Lifetime Mechanical Warranty and 5-year Finish Warranty Subject to the terms and conditions of this warranty, Schlage Lock Company (“Schlage”) extends a lifetime limited mechanical and 5-year finish warranty to the original consumer user (“Original User”) of Schlage J Series products (“Product”) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Product Warranties, Additional Terms & Conditions: Commercial and Residential Applications Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximum liability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by the Company may be brought by the Original User more than one (1) year after the cause of action has arisen. How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state. Note: Should the Product be considered a consumer product as may be covered by the Magnusson Moss Federal Warranty Act, please be advised that: (1) Some states do not allow limitations or incidental consequential damages or how long an implied warranty lasts so that the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a user may have other rights which may vary from state to state. For warranty service and shipping instructions contact: Schlage and Portable Security Commercial Customers Schlage and Portable Security Residential and Retail Customers Schlage Customer Care 3899 Hancock Expressway Colorado Springs, CO 80911 Schlage Customer Care 2119 East Kansas City Road Olathe, KS 66061 (877) 671-7011 Fax (800) 452-0665 (800) 847-1864 (option 1) Consumer Fax (800) 366-5625 The Schlage Lock Company reserves the right to make changes in designs and specifications or to make additions or improvements on its products without notice and without incurring any obligation to incorporate them on products previously manufactured. The Schlage Lock Company is not responsible for any modification, addition or alteration to our products by others. Distribution Function and Location Policy The Schlage customer relationship includes the nonexclusive area of primary sales responsibility and the channel of distribution assigned by Schlage. It is vital to our success and for the effective management of the distribution of our products that the Schlage customer relationship, once it is satisfactorily established between us, should not be changed without our approval. Therefore, after selection by Schlage as a distributor of one or more of Schlage products, a customer should continue to perform that distribution function from the location of its business at the place or places utilized at the time of selection. A customer should not change its Schlage distribution function or establish a different or additional location without the prior written consent of Schlage. Schlage reserves the right to discontinue, after appropriate notice, sale of its products to any customer which refuses to adhere to this policy. Schlage also reserves the right to change, in its sole discretion, the number and locations of the distributors authorized to distribute its products in any area. This determination will be based upon, among other considerations, the success or failure in developing the market for Schlage products. Price Book 8 18 Effective April 4, 2020 • Rev. 04/20 Schlage Key Systems Sales Policy • TERMS & CONDITIONS DefinitionStandard keyways are C, CE, E, EF, F, FG, G, H, J, K, L. All other keyways are considered restricted. Everest, Everest Primus, Classic Primus and all other restricted keyway products (Quad, Reversed, Numbered) manufactured by the Schlage Lock Company are offered for sale by policies set forth per product type and security levels through specific channels of distribution. Possession of this price book or any other Schlage price book does not constitute “the right to purchase” these products. Please refer to the sales policy below for terms and condition. The term keyway(s) refer(s) to keyway, key sections or side bit milling. Standard Classic (Obverse) Key Sections- no restriction Standard keyways are Classic (Obverse) C, CE, E, EF, F, FG, G, H, J, K, L. Everest and Everest 29 Open (C and S Key Sections) Everest and Everest 29 Open (C & S keyways) include non-Primus products with Everest C and Everest 29 S keyways and key sections. Schlage only sells Everest and Everest 29 Open products to commercial security professionals. Commercial security professionals purchasing Everest and Everest 29 Open products from Schlage are permitted to stock and to originate or duplicate keys without signature verification. TERMS & CONDITIONS / FORMS & EXAMPLES Schlage Key Systems Sales Policy Purchasers of Everest and Everest 29 open (C & S) are permitted to resell the products in accordance with their distribution agreement to end users and to other commercial security dealers who have a professional locksmith on staff but are expressly prohibited from selling to: Terms-11 i) Any residential retail outlet. ii) Any individual or entity purchasing or selling products through any method of auction. End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Every new end user system, using these restricted keyways, requires prior approval from the local RSO sales office management. Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlage account as the time of the sale, unless authorization has been granted in writing by the local RSO sales office management where the end user reside. Locksmiths/ dealers’ keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235, Everest 29 R234 & R235. Locksmith/ dealer key section can be sold to commercial locksmiths/ dealers only. Right to stock and sell locksmiths/ dealers restricted keyways requires the appropriate written agreement with Schlage and approval by the local RSO sale office management. Please contact your local RSO sale office for a copy of these contracts and additional information. Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy. Price Book 8 Effective April 4, 2020 • Rev. 04/20 19 Forms & Examples End User Keyways - Primus / Primus XP levels 3, 4 & 9, Everest D, Everest B, Everest 29 T, Everest 29 R, Quad, Reversed, Numbered. End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer or locksmith’s use or distribution. The facilities are described as the “ship-to” address pre-authorized by the end user via a letter of authorization (LOA) or face sheet (depending upon the key system type). Forms & Examples Terms-12 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS • Restricted Keyway Policy Restricted Keyway Policy Everest B, Everest 29 R All Everest and Everest 29 SFIC (B and R Families) keyways are restricted. When ordering a new keying system, include the following: • Job (end-user) name, city, state and zip code. • Letter of Authorization (LOA) – Authorized ship-to address for key blanks, cores and cut keys on end-user’s official stationery. See Forms & Examples for sample letter of authorization. • Numerically defined specifications for expansion of all branches of the key system. The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to an existing keying system, include the following: • Job (end-user) name, city, state and zip code. • Facility code previously assigned by Schlage and stamped on all existing keys and blanks. • Registry number of the keying system as established by Schlage. • Letter of authorization on end-user’s official stationery is required when: - End-user places order with new dealer. - Order is to be drop shipped to a different ship-to address than originally authorized by the end-user. See Forms & Examples for sample letter of authorization. Bitting list (transcript) orders require a letter of authorization on the end-user’s official stationery. Prevailing prices apply. Everest D, Everest 29 T All Everest D and Everest 29 T keyways are restricted. When ordering a new keying system, include the following: • Job (end-user) name, city, state and zip code. • Letter of Authorization (LOA) – Authorized ship-to address for all products on end-user’s official stationery. See Forms & Examples for sample letter of authorization. • Numerically defined specifications for expansion of all branches of the key system. The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to an existing keying system, include the following: • Job (end-user) name, city, state and zip code. • Facility code previously assigned by Schlage and stamped on all existing keys and blanks. • Registry number of the keying system as established by Schlage. • Letter of authorization on end-user’s official stationery is required when: - End-user places order with new dealer. - Order is to be drop shipped to a different ship-to address than originally authorized by the end-user. See Forms & Examples for sample letter of authorization. Quad, Numbered (“Paracentric”) and Reverse Keyway Family Policy A letter of authorization from the end-user is required for all orders for restricted keyway plugs, 0-bitted and 1-bitted products and all key blanks. Restricted keyway products are not available keyed random. The letter of authorization must include the address in which the materials will be shipped. Keyway or keyway family must be referenced in the letter. Letters must be dated and signed by the end user. Letters dated more than 6 months prior to the order submission date will not be accepted. Letters for projects that are ongoing may be older than six months if effective dates are referenced in the letter. With the exception of the signature, all other information must be typed. Allowable End User Authorizations for Restricted Keyways: The end user can authorize a dealer or distributor to order and inventory products if they so choose. This authorization requires the submission of a fully completed “Letter of Authorization” or “Signature Card”, depending on the product type requirements, by the end user to Schlage. Construction Core Program Policy Full size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less the handling charge, will be issued upon their return to the factory. Please contact customer service for return authorization. Customers may not deduct payment for construction cores prior to completion of their authorized return. Control Keys for Interchangeable Cores A single control key will be added to orders containing interchangeable cores where a new masterkey system, master key system expansions requiring a different control key and all construction core orders are placed and does not include a control key on the purchase order. Construction core orders will include both a control and user key. Price Book 8 20 Effective April 4, 2020 • Rev. 04/20 Cylinder Policies • TERMS & CONDITIONS Primus High Security cylinder products manufactured by the Schlage Lock Company are offered for sale through specific channels of distribution, based on stocking requirements and security levels. Possession of this price book or any other Schlage price book does not constitute “the right to purchase” Primus products. Important: In stocking levels where purchase agreements are required, a fully executed purchase agreement, including initial minimum inventory order, must be in place before any Primus products may be quoted or purchased. Contact your RSO Consultant for specific details. The prices contained herein apply to Primus Levels 1 through 9 with respect to the actual product. Availability of product is subject to additional conditions as follows: PRIMUS/PRIMUS XP LEVEL 1: For retail locksmiths and Schlage dealers. Standard nationwide side bitting by keyway. Stocking level requires a separate Primus/Primus XP agreement. Initial inventory commitment required for distributors but not for participating locksmiths. Obverse keyways only. HP, JP and LP section keys are not available. PRIMUS XP LEVEL 1 PLUS: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of the dealer physical location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. Obverse keyways only. Cylinders can be ordered LKB, KD, KA or MK. PRIMUS/PRIMUS XP LEVEL 2: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. Obverse keyways only. PRIMUS/PRIMUS XP LEVEL 3: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within 2-digit zip code (Level 3G) for orders of 60 - 1,999 Primus cylinders. Orders of fewer than 60 Primus cylinders are randomly assigned a side bitting from a small nationwide pool of side bittings (Level 3U). Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only. PRIMUS/PRIMUS XP LEVEL 4: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within a time zone (Level 4Z) for orders of 2,000 - 3,999 Primus cylinders. A nationwide exclusive side biting (Level 4N) is assigned to key systems of 4,000 or more Primus cylinders. This exclusivity can be purchased for a separate fee for smaller quantities of cylinders. This price book does not contain the fee schedule. Contact your RSO Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only. Everest® Keyways PRIMUS XP LEVEL 7: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of of the dealer physical location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. All Everest 29 key sections. Cylinders can be ordered MK, KA, KD or LKB. PRIMUS/PRIMUS XP LEVEL 8: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to dealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase. Equivalent to Level 2 above, but with Everest S Family keyways only. PRIMUS/PRIMUS XP LEVEL 9: End user level not stocked by dealers. Key systems are assigned varying degrees of geographically exclusive side bittings based on a sliding scale of purchase commitment or separate fees. This price book does not contain the fee schedule. Contact your RSO Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Level 9U, 9G, 9Z, and 9N are equivalent to Levels 3U, 3G, 4Z, and 4N above, but with Everest S and T Family keyways. The following side bit milling exclusivity criteria apply to both levels 3, 4 & 9: • 1- 60 cylinders-Random assignment • 61-1999 cylinders-First two digits of zip-code • 2000-3999 cylinders-Time-Zone Exclusivity (also available for $10,000 fee for an organization who would like this exclusivity and doesn’t meet cylinders quantity requirement). • 4000 + cylinders-Nation Wide Exclusivity.(also available for $40,000 fee for an organization who would like this exclusivity and doesn’t meet cylinders quantity requirement). Important Ordering Information See Forms & Examples: Primus and Everest 29 Primus Ordering Checklist for a checklist of information required to process a Primus order. Note that, for security reasons, all end user Primus levels (Level 3, 4 and 9) require a Facesheet (MS-E120) bearing an original signature. Opening orders for end user Primus levels also require a Signature Card (MS-E130) bearing original signatures. Facesheets and signature cards are used to authenticate the end user request for product, therefore orders received without the correct supporting documents (or without original signatures) are subject to delays or cancellations. Blank Facesheets and Signature Cards are included in the Forms & Examples section of this price book for your reference. Additionally, electronic version of these forms are available at allegion.com/us. The Schlage Lock Company reserves the right to make changes in designs and specifications, to make additions or improvements on its products, or to discontinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition, or alteration to our products by others. Inventory commitment Requirements-Commercial Locksmiths Levels Primus XP Everest 29 Primus XP Level 1 None N/A N/A Level 1+ $7,500 Level 7 XP $7,500 Level 2 25,000 Level 8 $25,000 Price Book 8 Effective April 4, 2020 • Rev. 04/20 21 Forms & Examples PRIMUS LEVEL 7: For retail locksmiths. Side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the Schlage wholesaler and the locksmith. Same as Level 1 PLUS above, but with Everest S Family keyways only. Terms-13 Classic Keyways PRIMUS LEVEL 1 PLUS: For retail locksmiths. A side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the wholesaler and the locksmith. Obverse keyways only. HP, JP and LP section keys are not available. Cylinders are always furnished less key blanks (LKB). TERMS & CONDITIONS / FORMS & EXAMPLES Primus® / Primus XP Sales Policy TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS • Cylinder Policies R Typical Applications 2 LEVEL Forms & Examples 3 LEVEL 4 Dealer Controlled Systems LEVEL End User Exclusive Terms-14 LEVEL Primus Wholesaler/ Locksmith Exclusive Locksmiths resell wholesaaler’s side bitting to end users; keys bear locksmith ID number. XP Dealer Exclusive Owned and stocked by dealers then resold to end users. Keys bear unique ID based upon three digits zip-code exclusivity of side bitting. Dealer Exclusive Owned and stocked by dealers then resold to end users. Keys bear a unique ID based upon time-zone exclusivity of side-bitting. • Strip Mall Shops • Small Businesses • Upscale Homes • Small Businesses • Restaurants • Doctor's Offices Consider Everest Open for Commercial Exclusivity Primus Wholesaler/ Locksmith Exclusive Locksmiths resell wholesaaler’s side bitting to end users; keys bear locksmith ID number. • Office Buildings • Banks • Private Schools • Healthcare Residences XP Dealer Exclusive Owned and stocked by dealers then resold to end users. Keys bear unique ID based upon three digits zip-code exclusivity of side bitting. Dealer Exclusive Owned and stocked by dealers then resold to end users. Keys bear a unique ID based upon time-zone exclusivity of side-bitting. End User Exclusive Exclusivity is based on either random assignment or on the first 2 digits of the zip code, depending on end user commitment. End User Exclusive Exclusivity is based on either a time zone or nationwide basis, depending on end user commitment. • Educational Facilities • Healthcare Facilities • Large Office Complexes • Government Buildings • Detention Centers • Franchises LEVEL Dealer Controlled Systems 1 Stocked by distributors and resold to end users via commercial locksmiths; All Level 1 Locksmiths have the same side bittings. End User Exclusive Exclusivity is based on either random assignment, on the first 2 digits of the zip code, on time zone, or on a nationwide basis, depending on end user commitment. End User Exclusive LEVEL 1+ R National Non-Exclusive 7 LEVEL 8 LEVEL 9 Electronic Validation from Schlage Electronic Validation (e-validation) is an online system for the use of the end user to create electronic authorizations replacing the letter of authorization (LOA) and Primus Facesheet processes. This online validation system is designed to ease the burden of an end user providing authorizations for ordering restricted key and cylinder products on their behalf. Through this system, the end user can register for an online account with Schlage that will allow them to manage their shipping addresses, shipping contacts and additional authorized users for their restricted products. Through this system, they can then generate an electronic Facesheet that they can provide to the distributor of their choice to allow an order for restricted products to proceed. Enrolling in and using this feature will reduce the overall time for an order to be processed from the time that the end user has determined the need for product. The electronic Facesheet provided by the e-validation system can be faxed or emailed along with a distributors order reducing the time and energy required for original copies of Facesheets previously required. The system is for both new and existing restricted key system owners. For new restricted systems, a registration process will provide the ability to create the initiating Facesheet for the project. Products/key systems eligible for e-validation: Everest – B and D restricted family of keyways Everest 29 – R and T restricted family of keyways Primus – All keyway families that include the Primus feature Primus XP – All keyway families that include the Primus XP feature E-validation can be accessed at the following web address: HTTPS://mycredentials.allegion.com Price Book 8 22 Effective April 4, 2020 • Rev. 04/20 Cylinder Policies • TERMS & CONDITIONS Master Key Shipment Policy TERMS & CONDITIONS / FORMS & EXAMPLES • • • • • • • • • 2-Day Air • Tracking number is assigned to shipment • Recipient’s signature is required upon delivery Classic Restricted (Numbered, Quad and Reverse) Classic Primus (Obverse and Quad) Everest Restricted (B and D Family) Everest 29 Restricted (R and T Family) Everest Primus (C and D Family) Everest 29 Primus and Primus XP (S and T Family) Classic Open (Obverse) Everest Open (C Family) Everest 29 Open (S Family) Forms & Examples Standard Method of Shipment Terms-15 Keyway Family of Master Key System All goods are shipped F.O.B. factory and become the customer’s property when they pass into the hands of the transportation company. Schlage reserves the right to use our choice of carrier. Note: Master keys need to be ordered separately and are not included by default, cylinders are shipped with operating keys standard. Schlage Default Keyways Schlage Commercial products (excluding Portable Security) Default keyway is Everest 29 S123 For other optional keyways, please specify Schlage Electronics Default keyway is Everest 29 S123 For other optional keyways, please specify Portable Security - Kryptonite: default to C keyway KD For made to order products, please specify the keying and keyway Schlage Residential: (F, B60, Dexter) Default keyway is C Price Book 8 Effective April 4, 2020 • Rev. 04/20 23 Terms-16 TERMS & CONDITIONS / FORMS & EXAMPLES TERMS & CONDITIONS • Hardware Finishes Hardware Finishes: Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel or other materials. Where required, a protective clear coating is applied and cured under high temperature. It is important that climatic conditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strong corrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity and preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic finishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not be cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap and buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning or preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware. In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless of base metal of finishing process. A, AL, CS, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based material and are plated to match finishes indicated. L-Series will utilize a brass material for 612 and 613 finishes. Finishes of latches, strikes, cylinders/cores, and visible mounting screws, though similar in appearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders Hardware Manufacturers Association) industry standard. Commercial Finish Codes and Descriptions: The nearest old U.S. equivalent code designations are shown in parenthesis ( ). Symbol 605 (3) 606 (4) 609 (5) 612 (10) 613* (10B) Forms & Examples 619 (15) Description Symbol Description BRIGHT BRASS, Clear Coated Matte Black 622 (19) SATIN BRASS, Clear Coated 625 (26) BRIGHT CHROMIUM PLATED, No Coating ANTIQUE BRASS, Satin Brass, Blackened, 626 (26D) SATIN CHROMIUM PLATED, No Coating Satin Relieved, Clear Coated 629 (32) BRIGHT STAINLESS STEEL, No Coating SATIN BRONZE, Clear Coated 630 (32D) SATIN STAINLESS STEEL, No Coating OIL RUBBED BRONZE, Oxidized Satin 643e AGED BRONZE, Clear Coated Bronze, Oil Rubbed, No Coating SATIN NICKEL, Satin Nickel Plated, Clear Coated * Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating. Price Book 8 24 Effective April 4, 2020 • Rev. 04/20 TERMS & CONDITIONS Notes TERMS & CONDITIONS / FORMS & EXAMPLES Terms-17 Forms & Examples Price Book 8 Effective April 4, 2020 • Rev. 04/20 25 TERMS & CONDITIONS Forms & Examples Terms-18 TERMS & CONDITIONS / FORMS & EXAMPLES Notes Price Book 8 26 Effective April 4, 2020 • Rev. 04/20 TERMS & CONDITIONS Notes TERMS & CONDITIONS / FORMS & EXAMPLES Terms-19 Forms & Examples Price Book 8 Effective April 4, 2020 • Rev. 04/20 27 TERMS & CONDITIONS Forms & Examples Terms-20 TERMS & CONDITIONS / FORMS & EXAMPLES Notes Price Book 8 28 Effective April 4, 2020 • Rev. 04/20 FORMS & EXAMPLES Introduction TERMS & CONDITIONS / FORMS & EXAMPLES Table of Contents How to Order Forms-2 How to Determine Hando of Door. . . . . . . . . Forms-2 How to Determine Hand of Parts (Handed Levers). . . . . . . . . . . . . . . . . . . . . . . . . . Forms-2 Ordering Examples Forms-3 Sample Letter of Authorization for Everest™ Restricted Products Forms-4 Primus Checklist Forms-5 Order Forms Forms-6 Using Order Forms. . . . . . . . . . . . . . . . . . . . . . . . Forms-6 Sequential List of Order Forms. . . . . . . . . . . . Forms-6 Terms & Conditions Forms-1 Price Book 8 Effective April 4, 2020 • Rev. 04/20 29 Forms-2 Terms & Conditions TERMS & CONDITIONS / FORMS & EXAMPLES FORMS & EXAMPLES • How To Order To order Schlage products, descriptive data should be in the same sequence as shown: LINE ITEM QTY 1 OUTSIDE INSIDE PRODUCT DES FIN DES FIN HAND LATCH DR STRIKE 3 4 5 6 7 8 9 10 2 1. LINE ITEM: Line item number 2. QTY: Quantity 3. PRODUCT: Complete lock product or part number 4. OUTSIDE DES: Outside design code 5. OUTSIDE FIN: Outside finish code 6. INSIDE DES: Inside design code. Leave blank if same as outside design code. 7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code. 8. HAND: Hand of door. Only one hand allowed per line item. Example: RH=Right Hand, LH=Left Hand, RR=Right Reverse, LR=Left Reverse. How to Determine Hand of Door 9. THK EXT DIM 11 12 ADDITIONAL DETAILS 13 14 How to Determine Hand of Parts (Handed Levers) LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL=Less Latch. 10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. LLL=Less Strike. 11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4", 212=2 1/2". 12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified: EE = Extended Equally EI = Extended Inside EO = Extended Outside ED = Extended Differently EI or EO assumes the latch will be centered on a 1 3/4" door, to which material has been added. 13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length. 012 = 1/8" 118 = 1 1/8" 018 = 3/16" 114 = 1 1/4" 025 = 1/4" 138 = 1 3/8" 031 = 5/16" 112 = 1 1/2" 037 = 3/8" 158 = 1 5/8" 050 = 1/2" 134 = 1 3/4" 078 = 7/8" 200 = 2" 100 = 1" 400 = 4" 14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements. Price Book 8 30 Effective April 4, 2020 • Rev. 04/20 Ordering Examples • FORMS & EXAMPLES OUTSIDE PRODUCT DES FIN INSIDE DES FIN HAND LATCH DR STRIKE THK EXT DIM TERMS & CONDITIONS / FORMS & EXAMPLES LINE ITEM QTY ADDITIONAL DETAILS One A or F-Series passage lock with a Georgian knob & rose in 609 on the outside and a Plymouth knob & rose in 605 on the inside, drive-in latch and strike. 1 1 A10S GEO 609 PLY 605 11-110 10-058 One D-Series classroom lock with Orbit interchangeable core knob for a 2 1/4˝ thick door, extended equally, E keyway. Also furnish one control key blank. 2 3 D70RD 3 1 35-056 ORB RH 214 EE E-111111 138 E section Two AL-Series entrance locks with Saturn levers in US 10B with knurling on the outside, tamper resistant screws and keyed alike. 4 2 AL53PD 8SA 613 KA Torx screws SAT 5 1 S80PD 6 2 50-215 SAT Terms & Conditions One S-Series storeroom lock with Saturn levers in 612, four keys per lock. 4 keys total 612 Charge for extra cut keys One L-Series passage lock with 05L 630 trim, with lead lined chassis. 7 1 L9010 05L 630 Lead lined per XL11-515 RH One B600-Series single cylinder deadbolt in US 26D outside, US 3 inside, less the strike, with construction core. No control or change keys. 8 1 B660T 626 ICX LLL Forms-3 9 1 Handling Charge 50-231 One ND-Series lever lock in RHO 612, classroom function on the outside, storeroom on the inside. Construction and master keyed to new system. Furnish one master key and one construction master key.* 10 1 11 1 ND70x80PD RHO Per XN12-006 612 49-101 Master Key 12 1 48-104 Construction Master Key 13 2 50-210 Master keying charge (1/cyl) 14 2 50-211 Constr. keying charge (1/cyl) One A-Series lock with an Orbit knob in US 3, entrance function, and Primus level 1 cylinder, CP keyway, 0-bitted, no keys. 15 1 A53LD 16 1 20-724 ORB 605 606 122 Primus #000367, CP-000000, LKB One mortise cylinder, 1 1/4˝ long, which will operate a Von Duprin exit device 17 1 20-001 626 114 One hotel function L-Series lock with 17B trim in 625, large bow change keys and one large bow emergency key, F section, 0-bitted. Left hand door. 18 1 L9485P 17B 625 LH 19 2 50-228 Charge for large bow keys substituted for standard bow keys 20 1 35-101 F section F-000000, 35-141 Keys * Use Master Keyed order form and Key System Summary when ordering. Price Book 8 Effective April 4, 2020 • Rev. 04/20 31 TERMS & CONDITIONS / FORMS & EXAMPLES FORMS & EXAMPLES • Sample Letter of Authorization For All Restricted Key Products DISTRICT 10 May 1, 2003 End User Letterhead - REQUIRED District 10 Schools 555 Main Street End User City, State 55555 (555) 555-5555 Date - REQUIRED To: Schlage Dealer 100 East Avenue Dealer City, State 11111 Dealer Name RECOMMENDED RE: District 10, Jones Elementary School Facility Name - REQUIRED Terms & Conditions Please consider this authorization to ship product for the above-referenced project. Include Registry Number & Facility Code (stamped on keys) for existing key systems Jones Elementary School is to be keyed using a new Everest 29 T Restricted Key System. For security reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master keyed products, however, can be shipped directly to the site. This letter authorizes Schlage to ship our restricted products to the following addresses: Forms-4 Master Keyed Products, Construction Keys, Locks Less Cylinders, and Locks with Construction Cores Attn: Building Project Manager District 10 Schools 555 Main Street End User City, State 55555 Master Keys, Change Keys, Control Keys, and Key Blanks Attn: Locksmith District 10 Lockshop 1201 Fifth Avenue End User City, State 55555 Authorized ShipTo Addresses REQUIRED These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility. We understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to add, remove, or change authorized shipping locations. Sincerely, End User Representative Facilities Manager End User Representative Signature REQUIRED Letter may be mailed or faxed to Schlage Schlage Restricted Order Processing 3899 Hancock Expressway Colorado Springs, CO 80911 Price Book 8 32 Effective April 4, 2020 • Rev. 04/20 Primus Checklist • FORMS & EXAMPLES TERMS & CONDITIONS / FORMS & EXAMPLES PRIMUS AND EVEREST 29 PRIMUS ORDERING CHECKLIST TO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDS IMPORTANT NOTES To expedite processing of all Primus orders, it is highly recommended that Primus products be ordered separately For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless Otherwise Specified For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless Otherwise Specified PRIMUS FOR LEVEL SEVEN FOR LEVEL ONE 3 3 The Distributor’s Primus number MUST be provided The Sequence number MUST be provided FOR LEVEL ONE PLUS 3 3 3 3 3 The Distributor’s Primus number MUST be provided The Locksmith’s Facility code MUST be provided The Keyway MUST be provided The Distributor’s Primus number MUST be provided The Sequence number MUST be provided The Locksmith number MUST be provided FOR LEVEL EIGHT The Dealer’s Primus number MUST be provided The Sequence number and/or Section MUST be Provided 3 3 The Distributor’s Primus number MUST be provided The Keyway MUST be provided FOR LEVEL NINE FOR LEVELS THREE & FOUR 3 3 3 FOR LEVEL TWO 3 3 Forms-5 3 3 Terms & Conditions EVEREST 29 PRIMUS Orders Originating a System MUST include both an Original Facesheet and a Signature Card An Original Facesheet MUST accompany all succeeding orders The Primus number MUST be indicated on the Facesheet ALL fields on the Facesheet MUST be completed where applicable 3 3 3 3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card An Original Primus Facesheet MUST accompany all succeeding orders The Primus number MUST be indicated on the Facesheet ALL fields on the Facesheet MUST be completed where applicable All Primus Orders & Supporting Documentation Should be Sent To: Schlage Attn: Primus Order Processing 3899 Hancock Expressway Colorado Springs, CO 80911 Price Book 8 Effective April 4, 2020 • Rev. 04/20 33 Using Order Forms We recommend using the order forms included with this price book when placing purchase orders for Schlage products. The following 14 pages of order forms are available for copying prior to placing your order. Bulk supplies of blank forms are also available upon request. Contact Customer Service to order bulk supplies of forms. Specify form number. Sequential List of Order Forms Description Form Number Rev Date Total Pages Available on allegion.com/us Non-Master Keyed Order Form, First Page MS-I250 3/14 1 page • Non-Master Keyed Order Form, Additional Page MS-I300 3/14 1 page • Master Keyed Order Form, First Page MS-I100 3/14 1 page • Master Keyed Order Form, Additional Page MS-I150 3/14 1 page • Key System Summary MS-I200 3/14 5 pages • Primus Facesheet MS-E120 3/14 1 page • Primus Signature Card MS-E130 3/14 1 page • ® ® Forms-6 Terms & Conditions TERMS & CONDITIONS / FORMS & EXAMPLES FORMS & EXAMPLES • Order Forms Price Book 8 34 Effective April 4, 2020 • Rev. 04/20 L INE ITEM Fax: Phone: Name: QTY P RODUCT OUTSIDE FIN DES INSIDE DES FIN HAND CUSTOMER NAME AND ADDRESS: ORDER WRITTEN BY FOR FURTHER INFORMATION, CONTACT: MARK CARTONS: PRICE BOOK # REQUESTED SHIPDATE SHIPPING INSTRUCTIONS QUOTE # L ATCH S TRIKE DR THK E XT SHIP TO: DIM ACCOUNT NO. ORDER P.O. NO. DATE 1 Ingersoll-Rand Rev. 3/14 2 1 250 Page 1 of A DDITIONAL DETAILS Use for Key Section and Bitting Information, KA Groups, Primus® No., Locksmith ID No., etc. Non-Master Keyed QTY Account No. L INE ITEM P RODUCT P.O. No. OUTSIDE FIN DES INSIDE DES FIN HAND L ATCH Page S TRIKE of DR THK E XT DIM © 2001 Ingersoll-Rand Non-Master Keyed Order Add’l Page Rev. 3/14 MS-I300 Rev. 2/01 A DDITIONAL DETAILS Use for Key Section and Bitting Information, KA Groups, Primus® No., Locksmith ID No., etc. LINE ITEM QTY PRODUCT Key/Label Instructions Lock Details Items Ordered FINISH OUTSIDE HAND (Only one hand per line item) QTY DESIGN Heading FINISH INSIDE Customer Name and Address: Order Written By: DESIGN Mark Cartons: Shipping Instructions: For Further Information Contact: Name: Phone: Fax: Account No.: Quote #: MASTER KEYED ORDER DOOR # KEY Symbol(s) LATCH MK Symbol(s) STRIKE DR THK Enter door thickness if not standard Ship to: Date: P.O. #: EXT Enter when door thickness is greater/ equal to 2˝ DIM Dimension for mortise cylinder, blocking ring, etc. Please provide as complete and accurate as possible so we can provide what you need for your Key System This form must be attached to the MASTER KEY SYSTEM SUMMARY FORM MS-I100 Page 1 of ___ ADDITIONAL DETAILS LINE ITEM QTY PRODUCT Key/Label Instructions Lock Details Items Ordered DESIGN FINISH OUTSIDE HAND (Only one hand per line item) QTY DESIGN FINISH Heading INSIDE DOOR # KEY Symbol(s) LATCH MK Symbol(s) STRIKE DR THK Enter door thickness if not standard EXT Enter when door thickness is greater/ equal to 2˝ DIM Dimension for mortise cylinder, blocking ring, etc. MS-I150 Page 2 of ___ ADDITIONAL DETAILS MASTER KEY SYSTEM SUMMARY This form must be attached to the Master Key Order form and P.O. Please provide as complete and accurate as possible so we can provide what you need for your Key System. Job Name Account No. Address City / State P.O.# Country For detailed instructions on how to complete this form please refer to pages 4 & 5 System Overview o o New o Attached Dealer Specified Combinations Existing (provide info below) Registry # __________________________________________ Structure or Factory Order # _____________________________________ 1. Select System Falcon Schlage o Standard o Schlage C o Restricted * o Interchangeable Core A2 o Interchangeable Core A4 o Classic o Classic Primus * Everest ® o B (Small Format IC, Restricted *) o C (Open) o Primus * o D (Restricted *) ® o Primus * ® Everest 29 key sections are backwards compatible to Everest Everest 29 ™ keyways and have the following relationships: o R (Small Format IC, Restricted *) o S (Open) o Primus * o T (Restricted *) o Primus * R family sections > B family keyways S family sections > C family keyways ® T family sections > D family keyways ® Construction Keyed Type o 5-pin o 6-pin o 7-pin See compatibility chart on page 5 Keyway Specified **: o Yes Full Size Construction Cores o o ICA No o ICB o ICC (Schlage Only) Small Format Construction Cores o Brown o Green Construction Keyed Type ** = The Commercial Master Key Department makes the final decision in the selection of key sections o Falcon o CK (BOK) o Lost Ball o Schlage o CK (Split) o RCK ( 5-Pin C only ) 1 of 5 MS-I200 2. Select Keys & Key Stamping Change Keys No. Of Keys per Symbol No. Of Keys per Cylinder Type o Standard Bow o Standard Bow o Access Bow (Unembossed) o Large Bow (Schlage Only) Key Stamp Details o Keyset Symbol o Do Not Duplicate o With Custom Die (DND) (Specify) o Non-standard Code (Specify) Change Key Packaging and Shipping Instructions *** = Furnished standard at no charge with Split-Key construction keying Pack Keys Independently (PKI) of Lock or Cylinder *** o Yes o No If PKI, ship change keys to: o Dealer o Other o See Primus Facesheet 3. Select Cylinder Stamping Cylinder Stamp Details o With Industry Standard Key Symbol o Non-Standard Code (Specify) Cylinder Stamping Location o Plug Face (N/A in Primus) - VKC o Concealed (N/A in Falcon STD) - CKC 2 of 5 MS-I200 4. Select Key Quantities Level Qty. Per Master Key Symbol (s) Total Quantity GGM GM MK or RMK Control Emergency Others Ship Master Keys To: o Dealer o See Primus Facesheet Special Function o Other Qty. Per Qty. Per RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only) CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only) Extractor Tools **** Small Format Construction Core Keys Small Format Construction Core Control Keys **** = Use with Construction Keying 5. Master Key Future Expansion List Future MK Symbols Example: 3 MK………o GGM GM MK MK MK MK Others Approx. # of Change Key Symbols Under Each Future MK BJ, BK 40 each o o o o o o o 6. Operating Instructions (Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders) Cross Keyed Cylinder is operated by these change keys Cross Keyed Cylinder X X X X X X X X 3 of 5 is operated by these change keys MS-I200 7. Instructions and Compatibility General Information If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer Service prior to placing the order: Tel. 1-877-671-7011 Fax 1-800-452-0663 • Only one structure may be ordered on the same purchase order • Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families • Classic Primus refers to Primus Obverse and Primus Quad key section families Section 1: Select System Full Size Construction Cores • Schlage only Small Format Construction Cores • 7-pin only for Schlage • 6- and 7-pin for Falcon CK (Split) • 6-pin for Schlage and Falcon • Split key construction keying is not available for Classic Primus or Everest 29 Primus RCK (Lost Ball) • 5-pin (C keyway) only for Schlage • 5-, 6-, and 7-pin for Falcon System Selection • Refer to the compatibility chart Section 2: Select Keys and Key Stamping Stamp Details • Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys • For custom die, attach RFQ approval for Schlage Section 3: Select Cylinder Stamping Type • For cylinder type refer to the compatibility chart Keyway (specify) • Schlage Commercial’s default key section for new Master Key Systems is Everest™ S145 4 of 5 MS-I200 Section 4: Key Quantities Level • Unless otherwise specified, the control key has the same cut as the highest-level key in the system (Except SFIC systems) Special Function • Construction keys are not furnished unless specified Change Keys • Unless otherwise specified 2 change keys are furnished per lock or cylinder Section 5: Master Key Future Expansion • Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols Section 6: Operating Instructions • Cross keying reduces the security and expansion of key systems • Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders Compatibility Chart 7 Pin Split Block O-Key Lost Ball Temp Core X X 5 Pin 6 Pin X X X Everest 29 S X X X Everest 29 T X X X Key A2 A4 0.025 0.018 Schlage Classic Everest 29 R X X Classic Primus (XP) X X Everest 29 Primus (XP) X X X Falcon Open X X X X X X Restricted X X X X Schlage C X SFIC Open X X X X X SFIC Restricted X X X X X X X 5 of 5 MS-I200 IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME: PRIMUS SECURITY LEVEL: 29 MS-E120 Ingersoll Rand Allegion Security Technologies Schlage Attn.: Primus Order Processing 3899 Hancock Expressway Security, CO. 80911 © 2009 Ingersoll Rand MS-E120 Rev. 3/14 6/09 Rev. PRIMUS Signature Card ® For Internal Use Only Primus# Order# G/Z/E S/M Level 3, 4, and 9 Order Authorization THIS SIGNATURE CARD ESTABLISHES AUTHORIZATION TO PURCHASE ADDITIONAL PRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INST ALLED AT THE ADDRESS BELOW. THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER – FAXED COPIES NOT ACCEPTABLE – PRIMUS SECURITY LEVEL: 3U (no exclusivity) 3G (2-digit zip exclusivity) Classic 4Z (time exclusivity) 4N (nationwide exclusivity) 9U (no exclusivity) 9G (2-digit zip exclusivity) Keyways Everest 9Z (time exclusivity) 9N (nationwide exclusivity) 29 Keyways PROJECT INFORMATION Project Name (please print or type) Street Address (no P.O. Box) City State Zip Code AUTHORIZED OWNER SIGNATURE(S): If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authority able to control other signers on this form. 1. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date State Zip Code State Zip Code State Zip Code State Zip Code State Zip Code Phone Number 2. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number 3. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number 4. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number 5. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number — OVER — MS-E130 DEALER OR LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE) Dealer or Locksmith Account # Primus # Address (no P.O. Box) City Dealer or Locksmith Company Name Phone Number State Zip Code Contact 2 (Please print or type) Fax Number Contact 2 Signature Contact 1 (Please print or type) Contact 1 Signature to Effective From: Date Date Owners Authorization By (Please print or type) Owners Authorization Signature Date SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility for validating the owner’s signature as identified on the Primus Signature Card before ordering the material. SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing additional Primus product or duplicating keys. Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letter requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributors and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of this card will not be accepted. Please mailthe theoriginal original copy Please mail copy to: to: IR Schlage Schlage Attn:Master Key Control Department Attn.: Key Control Department 3899 Hancock Expressway 2315 Briargate Parkway, Suite 700 Colorado Springs, COCO80920 Colorado Springs, 80911 – FAXED COPIES WILL NOT BE ACCEPTED – © 2002 Ingersoll-Rand MS-E130 Rev . 8/05 Rev. MS-E130 3/14 A Series GRADE 2 CYLINDRICAL KNOB LOCK A-Series Exploded View - A53PD CYLINDRICAL Inside knob Inside rose Mounting screws Mounting plate A-1 Lock chassis 6-Pin cylinder AL-Series ALX-Series Box Outside knob Strike Outside rose Reversible deadlatch 1/2" Throw D-Series Door Preparation 2-3/8" 60 mm 1" 25 mm 7/8" dia. 22 mm ND-Series 2-1/4" 57 mm 2-1/8" 54 mm Price Book 8 Effective April 4, 2020 • Rev. 04/20 57 A Series To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 10 Inside Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details A53PD PLY 626 LEV 613 - 11-085 10-001 178 EE - KA Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Line item number Quantity Product function + Cylinder code Outside lever design Outside finish Inside lever design: Specify only if different from the outside lever design Inside lever finish: Specify only if different from the outside finish Hand of door: N/A for A lock Product latch: Leave blank for standard latch or specify part number if non-standard latch is required. Product strike: Leave blank for standard strike or specify part number if non-standard strike is required. Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4" Extension: Enter for doors 1 7/8" or greater. Example: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended differently Dim: Dimension: Enter only for non-standard strike lip length Additional Details: Enter additional detail for keying information or special requirements AL-Series A-2 CYLINDRICAL Ordering Procedures ND-Series D-Series ALX-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 58 Effective April 4, 2020 • Rev. 04/20 Introduction A Product Identification Table of Contents A 53 P D Latch Suffix D S CYLINDRICAL = Deadlatch = Springlatch Cylinder Suffix P6 = 6-Pin Cylinder L = Less 6-Pin Cylinder R = FSIC J = Less FSIC M = SL - FSIC T = FSIC - Construction Core SL Conventional Cylinder, Z = 7 pin Function A-3 Lock Series Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Satin Bronze Oil Rubbed Bronze Bright Chromium Plated Satin Chromium Plated Bright Stainless Steel Satin Stainless Steel Aged Bronze ALX-Series Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US 10) 613 (US 10B) 625 (US 26) 626 (US 26D) 629 (US 32) 630 (US 32D) 643e (US 11) AL-Series Functions A-4 Complete Locks A-5 A-7 Options Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7 Lock Less Components. . . . . . . . . . . . . . . . . . . . . . . . . A-8 Non-Standard Door Thickness . . . . . . . . . . . . . . . . . A-8 Tamper Resistant Torx® Screws. . . . . . . . . . . . . . . . A-8 Special Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8 Parts A-9 Knobs and Related Components. . . . . . . . . . . . . . . A-9 Roses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9 Latches and Related Components . . . . . . . . . . . . . A-9 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10 Plunger Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11 Reinforcements and Adapters. . . . . . . . . . . . . . . . . . A-11 Finished Miscellaneous Parts. . . . . . . . . . . . . . . . . . A-12 Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . A-12 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13 Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13 Torx Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13 Cylinder Reference Table. . . . . . . . . . . . . . . . . . . . . . A-13 Complete Cylinders See Cylinders Section How To Order Forms & Examples Standard Features ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw 1 1/8" x 2 3/4", Square corner, T-strike, box 2 3/8" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/8" – 1 7/8" Two nickel silver cut keys per lock, 6-pin, S123 section D-Series Certification Latch Strike Backset Cylinder Door Range Keys ND-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 59 A • Functions CYLINDRICAL ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. Non-Keyed Locks Keyed Locks SCHLAGE ANSI SCHLAGE ANSI A10S F75 A53PD F109 Entrance Lock A70PD F84 Classroom Lock A25D Blank plate outside. Inside knob always unlocked. Specify door thickness. F77 AL-Series Turn/push-button locking; pushing and turning button locks outside knob, requiring use of key until button is manually unlocked. Push- button locking; pushing button locks outside knob until unlocked by key or by turning inside knob. Outside knob locked and unlocked by key. Inside knob always unlocked. Patio Lock Push-button locking. Turning inside knob or closing door releases button, preventing lock-out. A79PD Communicating Lock With Blank Plate Locked or unlocked by key from outside. Blank plate inside. A40S A43D A170 F76 F79 Bath/Bedroom Privacy Lock Push-button locking. Can be unlocked from outside with small screwdriver. Turning inside knob or closing door releases button. A80PD F86 Storeroom Lock A85PD F93 Faculty Restroom Lock (with Indicator Cylinder) Turn-button in outer knob locks and unlocks knob and inside thumbturn. Outside knob fixed. Entrance by key only. Push-button in inside knob activates visual occupancy indicator, allowing only emergency master key to operate. Turning inside knob or closing door releases visual occupancy indicator. Rotation of inside spanner-button provides lock-out feature by keeping indicator activated. Single Dummy Trim Dummy trim for one side of door. Used for door pull or as matching inactive trim. ND-Series Price Book 8 60 Outside knob fixed. Entrance by key only. Inside knob always unlocked. Communicating Lock D-Series ALX-Series Both knobs always unlocked. Exit Lock A-4 A30D Passage Latch Effective April 4, 2020 • Rev. 04/20 Complete Locks • A Georgian (GEO) Levon (LEV) * Orbit (ORB) Plymouth (PLY) Tulip (TUL) CYLINDRICAL * The Levon lever is available on inside trim for the following functions: 25, 30, 53, 70, 80 & 85. Roses Outside Rose - Plymouth Knob: Plymouth & Levon Size: 2 1/2" dia. Outside Rose - Georgian Knobs: Georgian Size: 2 1/2" dia. Outside Rose - Tulip Knobs: Tulip & Orbit Size: 2 1/2" dia. A-5 Latches 11-085 Standard 11-104 41-005 AL-Series 11-068 Standard ALX-Series Strikes 10-001 Standard 10-004 10-025 10-026 10-058 D-Series ND-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 61 Complete Locks • A CYLINDRICAL Designs and Finishes Function Description ORB PLY GEO TUL LEV*** Primary Cylinder Adjustments Available Levers Available Finishes 605 6606 6609 612* 6625 643e* RD TD MD 626 613 6629** 630** Keyless A10S Passage A25D Exit, blank plate x lever A40S Privacy A30D Privacy, hospital A43D Privacy, hospital A170 Single dummy 128 140 A53PD Entrance A70PD Classroom A80PD Storeroom A79PD Communicating A85PD Faculty Restroom Lock 172 184 202 64 70 80 227 239 257 262 274 292 605 6606 6609 612 613 6625 626 6629 630 643e LD RD TD MD JD -65 39 -36 -96 N/A Everest And Restricted Keyway - does not apply to Primus AL-Series SECONDARY CYLINDER ADJUSTMENTS Everest D & T Family & Restricted Keyways (Quad, Numbered, Reverse) +18 SL Cylinder with Everest B or Everest R keyways +18 Primus/Primus XP - order the lock less cylinder and the cylinder separately (prices below) Single Kil Example: 1 Ea. A53LD & 1 Ea. 20-724(-XP) +145 Single Fsic Example: 1 Ea. A53JD & 1 Ea. 20-740(-XP) +157 * Not available for GEO LEV TUL ** Finishes only available in PLY *** The Levon lever is available on inside trim for the following functions: 25, 30, 53, 70, 80 & 85 Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. ND-Series D-Series ALX-Series **** Price Book 8 62 JD ORB 158 Keyed, Single Cylinder (P/P6/Z core options are the baseline for cylinder adjustments) A-6 LD ALL Effective April 4, 2020 • Rev. 04/20 Options• A Latches, Strikes Latches Part Number Backset - Hsg Dia. - Description Lock Adjustment Spring Latch 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-110 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 11-113 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" CYLINDRICAL 11-068 N/C +13.60 Deadlatch 11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-104 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 11-105 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" +13.60 41-005 5" - 7/8" - Backset extension link - require reinforcement when used in hollow metal door applications; must be used with 2 3/8" backset latches +21.70 N/C A-7 AL-Series Strikes Part Number Lip Length - Description 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" Lock Adjustment N/C 1" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" +7.70 ALX-Series 1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-004 10-025 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" N/C 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" N/C 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" +28.00 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-058 Circular, adjustable, 1 3/4" diameter - 605 and 626 finishes only K510-066 Box for ANSI strike, must be specified D-Series 10-026 N/C ND-Series Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 63 Locks Less Components, Non-Standard Door Thickness, Tamper Resistant Torx Screws, Special Functions A • Options Locks Less Components CYLINDRICAL Description Specify Lock Adjustment Less each knob LLL for knob design Example: A53PD LLL/PLY x PLY -8.00 Less each rose or turn LLL for rose design Example: A53PD PLY x PLY/LLL -6.30 Less springlatch LLL for latch Example: A40S PLY 605 LLL 10-004 -10.30 Less deadlatch LLL for latch Example: A53PD PLY 626 LLL 10-025 -17.20 Less strike LLL for strike Example: A53PD PLY 612 11-096 LLL -3.70 Lock chassis and spring cages only Sum of deducts Less all possible components Example: A53LD LLL 626 LLL LLL Non-Standard Door Thickness Description Specify A-8 Extended Inside (EI), 2" thru 2 1/2" Lock Adjustment Door thickness and how door is extended. Example: 2 1/2", EI +53.70 Tamper Resistant Torx® Screws Specify/ Part Number AL-Series Torx Screws Description Lock Adjustment +21.90 Screws - Latch and Strike Special Functions - Extended Lead Times Part Number “X” Number A53PD XA11-297 Description A53PD with restoring slide ND-Series D-Series ALX-Series Lock Function Price Book 8 64 Effective April 4, 2020 • Rev. 04/20 Base Lock Lock Adjustment A53PD +164.00 Parts • A Knobs and Related Components, Roses, Latches and Related Components Knobs and Related Components Available Finishes - Specify for Listed Parts 01-008 ORB PLY; 01-009 ORB PLY; 01-026 ORB 01-008 TUL GEO LEV; 01-009 TUL GEO LEV * 606 609 612 613 625 626 629 630 643e • • 6 6 • 6 • • 6 • • 6 6 • • Description Closed Knob or Lever - GEO LEV ORB PLY TUL Open Knob or Lever - GEO LEV ORB PLY TUL Open Knob - with sleeve for cylinders - GEO ORB PLY TUL Full Size Core Knob - ORB Full size core driver and retainer - finish not required Full size core retainer - finish not required Full size core driver, universal - finish not required 6 Price Each CYLINDRICAL Part Number 01-008* 01-009* 01-018* 01-026* 01-053 A501-941 C604-307 605 $42.60 59.30 79.90 13.80 5.20 10.00 Specify part number, knob style, finish. Ex: 01-009 GEO 626 (open knob, Georgian design, 626 finish) Roses Available Finishes - Specify for Listed Parts 01-001 TUL PLY, 01-002 TUL PLY, A201-558, A501-766 01-001 GEO, 01-002 GEO ** 606 609 612 613 625 626 629 630 643e • • 6 6 • 6 • • 6 • • 6 6 • • Description Outside Rose - TUL PLY GEO Inside Rose - TUL PLY GEO Rose, out. - A25 Rose, ins. - A79 6 Price Each A-9 Part Number 01-001** 01-002** A201-558 A501-766 605 $32.10 56.50 50.60 Specify part number & finish. Ex: 01-002 PLY 626 Plymouth design, 626 finish) Latches and Related Components 39-030 612 613 625 626 629 630 643e • • • • • • • 6 • • • Backset - Hsg Dia. - Description • Price Each 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 5" - Backset extension link - require reinforcement when used in hollow metal door applications; backset link must be used with 2 3/8" backset latches. Rabbeted latch and strike kit - adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations. $62.00 66.60 62.00 66.60 23.50 ND-Series 39-030 609 D-Series 41-005 606 ALX-Series Part Number Spring Latch 11-068 11-069 11-110 11-111 11-112 11-116 11-113 11-118 Dead Latch 11-085 11-088 11-104 11-091 11-092 11-096 11-105 11-103 605 AL-Series Available Finishes - Specify for Listed Parts 11-068, 11-069, 11-110, 11-111, 11-112, 11-116, 11-113, 11-118, 11-085, 11-088, 11-104, 11-091, 11-092, 11-096, 11-105, 11-103 59.90 Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 65 A • Parts Strikes Strikes Available Finishes - Specify for Listed Parts 10-001, 10-004, 10-025, 10-026, 10-027 606 609 612 613 625 626 629 630 643e • • • • • • • • • 6 • • Part Number Lip Length - Description Price Each 10-001 118 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 100 1" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 114 1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 112 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 134 1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 200 2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-004 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 11.40 10-025 1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 15.70 10-025 138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 10-025 112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" 10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 7.60 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 7.60 10-058 Circular, adjustable, 1 3/4" diameter 10.90 K510-066 Box for ANSI strike - finish not required 7.00 $6.50 14.30 45.00 ND-Series D-Series ALX-Series AL-Series A-10 CYLINDRICAL 10-058 605 Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 66 Effective April 4, 2020 • Rev. 04/20 Parts • A Plunger Parts, Reinforcements and Adapters Plunger Parts Available Finishes - Specify for Listed Parts 01-055, 01-056, 01-057, 01-058, 01-060, 01-063 Part Number 605 606 609 612 613 625 626 629 630 643e • 6 6 • • 6 • 6 • • Dimension - Design - Door Range - Description Price Each CYLINDRICAL 360 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A30 424 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A30 449 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A30 01-055* 428 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A30 492 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A30 517 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A30 360 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A40 424 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A40 449 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A40 01-056* 428 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A40 492 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A40 517 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A40 070 - Non-ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40 135 - Non-ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40 01-057* $16.80 A-11 070 - ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40 135 - ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40 281 - Non-ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43 349 - Non-ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43 01-058* 281 - ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43 349 - ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43 360 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A53 AL-Series 424 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A53 449 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A53 01-060* 428 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A53 492 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A53 517 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A53 363 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A85 427 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A85 431 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A85 34.30 ALX-Series 452 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A85 01-063* 497 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A85 520 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A85 * Specify part number, dimension, design & finish. Ex: 01-060 492 ORB 626 Reinforcements and Adapters Description 37-001 Metal door reinforcer kit, fits both 7/8" and 1" diameter housings - Specify door thickness, includes A501-567 and A501-565 or A501-566. A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold latch in metal doors. 12.70 A501-878** Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation 0.80 G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 7.10 40.50 20.40 ND-Series ** Price Each D-Series Part Number Order in multiples of 100 Price Book 8 Effective April 4, 2020 • Rev. 04/20 67 A • Parts Finished Miscellaneous Parts, Miscellaneous Parts Finished Miscellaneous Parts Available Finishes - Specify for Listed Parts 605 CYLINDRICAL 38-018, A201-330, A201-399, A201-406, A201-684, A201-688, A301-403, A301-404, A301-405, A301-406 Part Number Description 38-018 Thin door extension ring (2 required per lock) A201-330 Non-threaded chassis, less knob & rose - A170 A201-399 Hub & cap, out. (except A10, A25, A40, A43) A201-406 Hub & cap, out. - A10, A40, A43 A201-684 Threaded chassis, less knob & rose - A170 A201-688 Turn unit, ins. - A43 A301-403 Housing & cap, 1 3/8" thru 1 7/8" door (except A43, A79) A301-404 Housing & cap, 1 7/8" thru 2 1/4" door, EI (except A43, A79) A301-405 Housing & cap, 2 1/4" thru 2 1/2" door, EI (except A43, A79) A301-406 Threaded housing & cap, ins. (except A43, A79) • 606 6 609 612 613 6 • • 625 626 6 • Price Each 13.60 46.00 33.10 46.00 56.50 12.50 12.60 Miscellaneous Parts ALX-Series AL-Series A-12 Part Number A201-370 A201-377 A301-386* A301-387 A301-391* A301-402 A301-409* A301-410* A500-001 A500-002 A501-167 A501-305 A501-498 A501-499 A501-615 A501-633 A501-710 A501-721 A501-767 A501-768 A501-791 A501-874 A501-901 A508-399 A508-597 ND-Series D-Series A700-017 A508-598 A508-600 A508-605 A508-640 A508-641 A590-158* A590-159 A590-180 A590-181 C503-008** * ** Description Cam & driver - A80 Mounting plate, ins. (except A43, A79) Spindle & catch, ins. (except A43, A79) Spindle & catch, out. (except A25, A43) Cam unit - A30 Cam unit, out. - A40, A53, A85 Spindle, 1 7/8" thru 2 1/4" door, EI (except A43, A79) Spindle, 2 1/4" thru 2 1/2" door, EI (except A43, A79) Spindle, ins, 2" thru 2 1/4" door, EI - A43 Spindle, ins., 2 1/2" door, EI - A43 Threaded rod for mounting A170s as double dummy set Hub plate, ins. (except A79) Hub, 1 3/8" door - A25 Hub, 1 3/4" door - A25 Spindle wedge - A80, A85 Spindle, ins. - A43 Swivel sleeve - A85 (except ORB design) Cam plug - A70, A79 Mounting plate - A79 Hub plate, ins. - A79 Cam & plug spacer - A70, A79 Hub plate, out. - A25 Plate, out. - A80, A85 Plate, out. (except A25, A80, A85) Spring separator (except A10, A25, A40, A43) - require frame A508-598 Spiral cam - A70, A79 Frame Housing - A43, A79 Slide spring Spacer, ORB knob Slide stop - A43 Slide, restoring - A30, A85 Slide, non-restoring - A43, A53, A70, A79, A80 Slide, restoring - A40 Slide, non-restoring - A10, A25 Cotter pin Parts that are not directly interchangeable with locks manufactured before 1984 Order in multiples of 100 Price Book 8 68 Effective April 4, 2020 • Rev. 04/20 Price Each $10.10 10.30 42.70 17.40 17.40 8.10 12.30 12.50 7.60 9.10 7.70 23.40 7.70 4.70 12.30 5.50 10.40 7.70 11.50 12.50 17.20 7.70 8.70 31.50 7.70 .72 629 630 643e 6 • • Parts • A Screws, Screw Packs, Torx Screw Packs, Cylinder Reference Table Screws * 605 Size • 606 6 609 6 612 • 613 625 6 Price Each • 10-32 x 1 1/8" 1.00 10-32 x 2 1/16" 1.20 10-32 x 1 1/8" 10-32 x 2" 10-32 x 1 1/8" 10-32 x 2" 12-24 x 1" 8-32 x 3/4" 1.40 1.40 626 629 6 630 643e 626 629 6 630 643e 626 629 6 630 643e • • • CYLINDRICAL Available Finishes - Specify for Listed Parts A508-649, A508-650, C603-256, C603-897 Part Number Door Thickness - Description Type 1 3/8" – 1 7/8" - Mounting, All A501-161* POH Mach (except A43, A79) 2" – 2 1/2", EI - Mounting, All A501-818* POH Mach (except A43, A79) A501-769* 1 3/8" – 2" - Mounting, A79 POMH 1-way A501-770* 2" – 2 3/4", EI - Mounting, A79 POMH 1-way A508-649* 1 3/8" – 1 7/8" - Mounting, A43 Torx screw (T-20) A508-650* 2" – 2 1/2", EI - Mounting, A43 Torx screw (T-20) C603-256* ANSI strike PFH Combo C603-897* Latch and strike PFH Combo 2.60 1.00 0.92 Order in multiples of 100 Screw Packs 605 • 606 6 609 6 612 • 613 625 6 Price Each • • • • $8.50 6.60 5.20 A-13 Available Finishes - Specify for Listed Parts A201-811, A201-812 Part Number Description Contents Mounting, latch and strike (2) A501-161 A201-811 (except A43, A170) (4) C603-897 A201-812 Mounting, A170 (3) C603-897 A201-814 Mounting, A43 (2) A508-649 Torx Screw Packs ** 605 • 606 6 609 6 612 • 613 625 6 Price Each • • • • $21.90 AL-Series Available Finishes - Specify for Listed Parts C203-311, C203-312 Part Number Description Contents C203-311** Latch and strike (4) C503-766 (T-15) (2) C503-766 (T-15) C203-312** Latch and ANSI strike (2) L583-371 (T-20) Torx screw packs are furnished with appropriate T-xx installation tool(s) Cylinder Reference Table Price Each $65.00 Price Each - Restricted $83.00 83.00 145.00 145.00 179.00 179.00 65.00 83.00 83.00 145.00 D-Series 145.00 179.00 179.00 96.00 96.00 ND-Series Cylinder Mechanism Function Design Standard Everest SL (R/B Keyways only) Primus Primus XP Everest SL Primus XP (R/B Except Orbit 91-704-XP Keyways only) 20-524 Primus UL437 20-524-XP Primus UL437 XP Everest SL Primus XP UL 437 91-504-XP (R/B Keyways only) 21-002-122 Standard 91-005 Everest SL (R/B Keyways only) Standard 20-724-122 Primus Functions 20-724-XP-122 Primus XP Orbit Except Everest SL Primus XP (R/B 91-705-XP A73 Function Keyways only) 20-524-122 Primus UL437 20-524-XP-122 Primus UL437 XP Everest SL Primus XP UL 437 91-505-XP (R/B Keyways only) Complete cylinder Standard Primus discontinued but may be Primus XP A73 Orbit assembled in Primus UL437 the field Primus UL437 XP 21-003 Except Orbit Standard A85 21-003-168 Orbit NOTE: When ordering sold separate parts specify part number and the finish. ALX-Series Part Number 21-002 91-004 20-724 20-724-XP 114.00 114.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 69 A ND-Series D-Series ALX-Series AL-Series A-14 CYLINDRICAL Notes Price Book 8 70 Effective April 4, 2020 • Rev. 04/20 AL Series GRADE 2 CYLINDRICAL LEVERED LOCK AL-Series Exploded View - AL53PD CYLINDRICAL Inside lever Driver cap Driver Rose Castle nut Inside spring cage A-Series Plastic insert Lock chassis Mounting screws Outside lever AL-1 6-Pin cylinder ANSI strike Rose and outside spring cage ALX-Series Reversible deadlatch ¹⁄₂" Throw D-Series Door Preparation 2-3/4" 1-1/8" 70 mm 29 mm 5/16" dia. 8 mm Indicates products that have EPD documentation available and meet LEED v4. 1" dia. 25 mm ND-Series 2-3/4" 70 mm 2-1/4" 57 mm 2-1/8" 54 mm Price Book 8 Effective April 4, 2020 • Rev. 04/20 71 AL Series To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 10 Inside Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details AL53PD SAT 626 NEP 619 - 11-096 10-025 200 EE - - Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Line item number Quantity Product function + Cylinder code Outside lever design Outside finish Inside lever design: Specify only if different from the outside lever design Inside lever finish: Specify only if different from the outside finish Hand of door: N/A for AL lock Product latch: Leave blank for standard latch or specify part number if non-standard latch is required. Product strike: Leave blank for standard strike or specify part number if non-standard strike is required. Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4" Extension: Enter for doors 1 7/8" or greater. Example: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended differently Dim: Dimension: Enter only for non-standard strike lip length Additional Details: Enter additional detail for keying information or special requirements AL-2 A-Series CYLINDRICAL Ordering Procedures ND-Series D-Series ALX-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 72 Effective April 4, 2020 • Rev. 04/20 Introduction AL Table of Contents Product Identification AL 53 P D Latch Suffix D = Deadlatch S = Springlatch Function Lock Series AL-3 SFIC = Small Format (Best® Style) Interchangeable Core Finish Codes and Descriptions ALX-Series Code Description 605 (US 3) Bright Brass 606 (US 4) Satin Brass 609 (US 5) Antique Brass 612 (US 10) Satin Bronze 613 (US 10B) Oil Rubbed Bronze 619 (US 15) Satin Nickel 622 (US 19) Matte Black 625 (US 26) Bright Chromium Plated 626 (US 26D) Satin Chromium Plated 626AM Antimicrobial Coating on Satin Chromium 643e (US11) Aged Bronze D-Series Standard Features ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw 1 1/4" x 4 7/8", ANSI, Square corner, no box 2 3/4" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/8" – 1 7/8" Two nickel silver cut keys per lock, 6-pin, S123 section ND-Series Certification Latch Strike Backset Cylinder Door Range Keys A-Series Cylinder Suffix P6 = 6-Pin Cylinder L = Less 6-Pin Cylinder R = FSIC J = Less FSIC M = SL - FSIC T = FSIC Construction Core B = Less SFIC BDC = Disposable Construction SFIC G6/7 = SFIC (6 or 7 Pin) H = Refundable Construction SFIC SL Conventional Cylinder, Z = 7 pin CYLINDRICAL Functions AL-4 Complete Locks AL-5 AL-7 Options Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-7 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-7 Lock Less Components. . . . . . . . . . . . . . . . . . . . . . . . AL-8 Non-Standard Door Thickness . . . . . . . . . . . . . . . . AL-8 Miscellaneous Lock Options. . . . . . . . . . . . . . . . . . . AL-8 Special Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-8 Parts AL-9 Levers and Related Components. . . . . . . . . . . . . . AL-9 Roses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-9 Latches and Related Components . . . . . . . . . . . AL-10 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-10 Plunger Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-11 Reinforcements and Adapters. . . . . . . . . . . . . . . . . AL-11 Parts for 2" Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-11 Hub, Frame and Housing Kits — For Locks Manufactured before May, 2003 . . . . AL-11 Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . AL-12 Special Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-12 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-13 Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-13 Torx Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . AL-13 Cylinder Reference Table. . . . . . . . . . . . . . . . . . . . . AL-13 Complete Cylinders See Cylinders Section How To Order Forms & Examples Indicates products that have EPD documentation available and meet LEED v4. Price Book 8 Effective April 4, 2020 • Rev. 04/20 73 AL • Functions CYLINDRICAL ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. Non-Keyed Locks Keyed Locks SCHLAGE ANSI SCHLAGE AL10S F75 Passage Latch AL50PD F82 Entrance/Office Lock Exit Lock AL53PD Entrance Lock Bath/Bedroom Privacy Lock AL70PD F84 Classroom Lock AL44S Hospital Privacy Lock AL80PD F86 Storeroom Lock AL170 Single Dummy Trim AL85PD F93 Faculty Restroom Lock (with Indicator Cylinder) AL-4 A-Series AL25D AL40S Both levers always unlocked. Blank plate outside. Inside lever always unlocked. Specify door thickness. F76 Push-button locking. Can be unlocked from outside with small screwdriver, not included. Turning inside lever or closing door releases button. Push-button locking. Unlocked from outside by turning emergency turn-button. Turning inside lever or closing door releases button. Dummy trim for one side of door. Used for door pull or as matching inactive trim. F109 ND-Series Price Book 8 74 Push-button locking. Push-button locks outside lever until unlocked with key or by rotating inside lever. Turn/push-button locking; pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside lever until unlocked by key or by turning inside lever. Outside lever locked and unlocked by key. Inside lever always unlocked. Outside lever fixed. Entrance by key only. Inside lever always unlocked. Outside lever fixed. Entrance by key only. Push-button in inside lever activates visual occupancy indicator, allowing only emergency masterkey to operate. Turning inside lever or closing door releases visual occupancy indicator. Rotation of inside spanner-button provides lock-out feature by keeping indicator activated. D-Series ALX-Series ANSI Effective April 4, 2020 • Rev. 04/20 Complete Locks • AL Jupiter (JUP) Neptune (NEP) Omega (OME) Saturn (SAT) CYLINDRICAL Commercial Lever Suite AL Lock Jupiter Omega Neptune Saturn L Lock Levers 07 Omega 17 06 98/99 Exit 07 16 17 06 ND Levers Athens Omega Sparta Rhodes S Lock Jupiter Neptune Saturn Tactile Options A-Series Tactile Warning (knurling) Saturn Lever Shown Roses Inside/Outside Rose - Omega Levers: OME Size: 3 7/16" dia. AL-5 Inside/Outside Rose - Rhodes Levers: JUP, NEP, SAT Size: 3 7/16" dia. ALX-Series Latches 11-068 11-088 11-096 Standard 11-104 11-116 D-Series Strikes 10-001 10-025 Standard 10-027 10-058 ND-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 75 AL • Complete Locks Designs and Finishes CYLINDRICAL JUP NEP OME SAT Function 626 605 606 609 612 619 622 625 643e 613 6626AM Decription PRIMARY CYLINDER ADJUSTMENTS AVAILABLE LEVERS AVAILABLE FINISHES Keyless AL10S Passage 211 223 241 AL25D Exit, blank plate x lever 230 242 260 AL40S Privacy AL44S Privacy, hospital 240 252 270 AL170 Single dummy 122 128 138 Keyed, Single Cylinder (P/P6/Z core options are the baseline for cylinder adjustments) Entrance/Office AL53PD Entrance AL70PD Classroom AL80PD Storeroom AL85PD Faculty Restroom Lock A-Series AL50PD Secondary Cylinder Adjustments LD RD TD MD JD ALL BD BDC JUP NEP SAT LD CD RD TD MD JD BD BDC GD HD 39 -36 N/C 87 45 319 337 -96 353 365 383 -96 Not Available EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +18.00 SL Cylinder with Everest B or Everest R keyways +18.00 PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW) SINGLE KIL EXAMPLE: 1 EA. AL53LD & 1 EA. 20-728(-XP) +145.00 +157.00 * FSIC and SFIC are not offered in 609 ND-Series D-Series ALX-Series AL-6 ** Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. Price Book 8 76 Effective April 4, 2020 • Rev. 04/20 HD 605 606 6609* 612 613 619 622 625 626 643e 6626AM 307 SINGLE FSIC EXAMPLE: 1 EA. AL53JD & 1 EA. 20-740(-XP) GD Options • AL Latches, Strikes Latches Part Number Backset - Hsg Dia - Description Lock Adjustment Spring Latch 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-110 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 11-113 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" CYLINDRICAL 11-068 N/C +15.00 Deadlatch 11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-104 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 11-105 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" +15.00 41-005 5" - Backset extension link - require reinforcement when used in hollow metal door applications; backset link must be used with 2 3/8" backset latches +23.90 A-Series N/C Part Number Lip Length - Description Lock Adjustment AL-7 Strikes N/C 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" ALX-Series +8.50 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-004 10-025 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" N/C 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" N/C 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" +30.80 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-058 Circular, adjustable, 1 3/4" diameter - 605 and 626 finishes only K510-066 Box for ANSI strike, must be specified D-Series 10-026 N/C ND-Series Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 77 Lock Less Components, Non-Standard Door Thickness, Miscellaneous Lock Options, Special Functions AL • Options CYLINDRICAL Locks Less Components Description Specify Lock Adjustment Less each lever LLL for lever design Example: AL53PD LLL/JUP x SAT -10.60 Less each rose LLL for rose design Example: AL53PD SAT x SAT/LLL -13.10 Less springlatch LLL for latch Example: AL40S SAT 605 LLL 10-025 -13.10 Less deadlatch LLL for latch Example: AL53PD SAT 626 LLL 10-025 -21.20 Less strike LLL for strike Example: AL53PD ATH 612 11-096 LLL -5.10 Lock chassis and spring cages only Less all possible components Example: AL53LD LLL 626 LLL LLL, lever chassis Sum of deducts A-Series Non-Standard Door Thickness Description Specify Lock Adjustment Extended Equally (EE), over 1 7/8" – 2" (SFIC not available for 1 7/8" - 2" door thickness) Door thickness and how door is extended. Example: 2", EE +5.50 AL-8 Miscellaneous Lock Options Specify/Part Number Description 8SA Tactile Lever - Saturn +47.00* Torx Screws Screws - Latch and Strike +23.40 * Lock Adjustment Per lever Special Functions - Extended Lead Times Function - Description “X” Number AL50PD XA11-297 AL50PD with restoring slide AL50PD AL53PD XA11-297 AL53PD with restoring slide AL53PD ND-Series Price Book 8 78 Base Lock Lock Function D-Series ALX-Series Part Number Effective April 4, 2020 • Rev. 04/20 Lock Adjustment (Base Lock) 202.00 Parts • AL Levers and Related Components, Roses Levers and Related Components Available Finishes - Specify for Listed Parts 51-021, 51-023, 51-025, 51-026, 51-022 SAT, 51-024 SAT, A700-041 51-022 JUP NEP, 51-024 JUP NEP 605 606 609 612 613 619 622 625 626 • • • • 6 • • • • • • • • • • • • Description 51-021* Closed Lever - JUP NEP OME SAT - locks man. before June 2003 51-023* Open Lever - JUP NEP OME SAT - locks man. before June 2003 51-025* Closed Lever - JUP NEP OME SAT - locks man. after June 2003 51-026* Open Lever - JUP NEP OME SAT - locks man. after June 2003 51-022* Full Size Core Lever - JUP NEP SAT 89.90 51-024* Small Format Core Lever & lever insert- JUP NEP SAT 87.90 A700-041 Driver cap, 1 3/8" - 1 7/8" doors - for locks man. after May 2002 4.50 A700-039 Driver, 1 3/8" - 1 7/8" doors - for locks man. after May 2002 21.40 A700-045 Lever insert for SFIC 7.40 A700-052 FSIC Core Driver, Universal 9.80 A700-021 SFIC Core Retainer 7.60 C604-381 SFIC Core Throw Member 9.00 D500-000 SFIC Core Spacer - 2 spacers required for 6-pin, 1 spacer required for 7-pin 1.70 A700-047 Interchangeable core lever insert, 1 3/8" - 1 7/8" doors 7.40 A700-044 Lever insert, 1 3/8" - 1 7/8" doors for locks man. after May 2002 6.90 6 6 Price Each $93.10 A-Series * • • CYLINDRICAL Part Number 643e 626AM Specify part number, lever style, finish. Ex: 51-025 NEP 626 (closed lever, Jupiter design, 626 finish) Available Finishes - Specify for Listed Parts 04-060 C604-402 605 606 609 612 613 619 622 625 626 • • • • 6 • • • • • • • • • • • • 6 Part Number Description 04-060** Outside / Inside Rose - RHO OME $107.00 C604-402 Blank Plate, AL25 109.00 • • 6 Price Each ALX-Series ** 643e 626AM AL-9 Roses Specify part number, lever style, finish. Ex: 04-060 RHO 626 (Rhodes design, 626 finish) D-Series ND-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 79 AL • Parts Latches and Related Components, Strikes Latches and Related Components 605 606 609 612 613 619 622 625 626 11-068, 11-069, 11-110, 11-111, 11-112, 11-116, 11-113, 11-118, 11-085, 11-088, 11-104, 11-091, 11-092, 11-096, 11-105, 11-103 • • • • • • • • • 39-030 • ND-Series D-Series ALX-Series AL-10 A-Series CYLINDRICAL Available Finishes - Specify for Listed Parts Part Number 643e 626AM • • Backset - Hsg Dia - Description Price Each Spring Latch 11-068 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-110 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 11-113 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" $62.00 66.60 Dead Latch 11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4" 11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-104 2 3/8" - 1" - Circular drive in - 605 & 626 finishes only 11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4" 11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4" 11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 11-105 2 3/4" - 1" - Circular drive in - 605 & 626 finishes only 11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 66.60 41-005 5" - Backset extension link - require reinforcement when used in hollow metal door applications 23.50 39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations. 60.00 62.00 Strikes Available Finishes - Specify for Listed Parts 10-001, 10-004, 10-025, 10-026, 10-027 10-058 605 606 609 612 613 619 622 625 626 • • • • • • • • • • • Part Number Lip Length - Description 10-001 118 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 100 1" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 114 1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 112 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 134 1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-001 200 2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-004 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 11.40 10-025 1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 15.70 10-025 138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 10-025 112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" 10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 7.60 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 7.60 10-058 Circular, adjustable, 1 3/4" diameter 10.90 K510-066 Box for ANSI strike 7.00 Price Each $6.50 13.90 45.00 Price Book 8 80 Effective April 4, 2020 • Rev. 04/20 643e 626AM • Plunger Parts, Reinforcements and Adapters, Parts for 2" Doors, Hub, Frame and Housing Kits — For Locks Manufactured before May, 2003 Parts • AL Plunger Parts Available Finishes - Specify for Listed Parts 605 609 612 613 619 • 6 • • • 51-037, 51-038, 51-039, 51-040, 51-041 51-037 Plunger unit, inside - AL53 51-038 Plunger unit, inside - AL85 51-039 Plunger unit, inside - AL40, AL44, AL50 51-040 Plunger unit, outside - AL40 51-041 Plunger unit, outside - AL44 625 626 643e • • • • 626AM Price Each CYLINDRICAL Part Number Description 622 $17.10 Reinforcements and Adapters Part Number Description Price Each 37-001 Metal door reinforcer kit, fits both 7/8" and 1" diameter housings - Specify door thickness, includes A501-567 and A501-565 or A501-566 A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold latch in metal doors 12.70 A501-878* Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation 0.82 G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 7.10 20.40 A-Series * $40.50 Order in multiples of 100 Parts for 2" Doors 605 606 609 612 613 619 622 625 626 • • 6 • • • • • • Part Number Description 643e 626AM • Price Each Driver, 2" door $74.50 A700-028* Hub, 2" door, for inside and outside - for locks manufactured after May 2003 34.90 A700-029* Hub, out., 2" doors - AL70 - for locks manufactured after May 2003 A700-030* Hub, out., 2" doors - AL25 A700-033* Full size interchangeable core lever insert, 2" door A700-034* Lever insert, 2" door ALX-Series A700-043 AL-11 Available Finishes - Specify for Listed Parts 43.10 7.40 (SFIC not available for 1 7/8" - 2" door thickness) * No finish specification required Part Number Description A700-048 A700-050 All (except AL25 & AL70) (2) A700-032 Chassis screws (1) A700-056 Frame, hub (2) A700-046 Hub (1) A700-057 Housing 2" (2) A700-032 Chassis screws (1) A700-056 Frame, hub (2) A700-028 Hub (1) A700-057 Housing 1 3/8" - 1 7/8" (2) A700-032 Chassis screws (1) A700-056 Frame, hub (1) A700-046 Hub (1) A700-057 Housing (1) A700-014 Hub 2" (2) A700-032 Chassis screws (1) A700-056 Frame, hub (2) A700-028 Hub (1) A700-057 Housing A700-049 AL70 A700-051 Price Each $90.00 92.40 ND-Series 1 3/8" - 1 7/8" D-Series Hub, Frame and Housing Kits — For Locks Manufactured before May, 2003 Price Book 8 Effective April 4, 2020 • Rev. 04/20 81 AL • Parts Miscellaneous Parts, Special Parts D-Series ALX-Series AL-12 A-Series CYLINDRICAL Miscellaneous Parts Part Number Description A100-053 Spring cage, ins. - 4 prong for locks manufactured after May 2002 Price Each A100-054 Spring cage, out. - 4 prong for locks manufactured after May 2002 A201-370 Cam - AL80 10.10 A301-402 Cam - AL40, AL50, AL53, AL85 10.30 A501-167 Threaded rod for mounting AL170s as double dummy set 17.30 A501-305 Hub plate, ins. 8.10 A501-311 Slide spring 7.70 A501-615 Spindle wedge - AL80, AL85 A501-721 Cam plug - AL70 A501-791 Cam spacer - AL70 4.70 A501-874 Hub plate, out. - AL25 12.30 A501-901 Hub plate, out. - AL80, AL85 5.50 A508-597 Spring seat - AL50, AL53, AL70, AL80, AL85 A590-158 Slide - AL85 $69.30 7.60 23.40 A590-159 Slide - AL50, AL53, AL70, AL80 A590-180 Slide, restoring - AL40, AL44, AL50, AL53 A590-181 Slide, non-restoring - AL10, AL25 A700-003 Spindle sleeve - AL85 A700-004 Hub plate, out. (except AL25, AL80, AL85) A700-014 Hub, out. - AL70 - for locks manufactured after May 2003 A700-015 Lever insert, 1 3/8" - 1 7/8" doors - for locks manufactured before May 2002 A700-016 Hub, out., 1 3/8" – 1 7/8" doors - AL25 A700-017 Spiral cam - AL70 12.30 A700-036 Spring - AL40, AL44 10.30 A700-046 Hub, 1 3/8" - 1 7/8" doors - for locks manufactured after May 2003* 6.80 A700-047 Interchangeable core lever insert, 1 3/8" - 1 7/8" doors 7.40 A700-056 Frame, hub - for locks manufactured after May 2003 A700-057 Housing - for locks manufactured after May 2003 A710-001 Spindle & catch, out. (except AL10, AL40) A710-004 Spindle & catch, ins. A710-007 Spindle & hub - AL170 31.80 A710-008 Small Format Interchangeable Core spindle & catch, outside - AL50, AL53, AL70, AL80 26.90 A710-020 Spindle & catch, out. - AL10, AL40 10.10 C503-308 Anchor spring (except AL25) 7.70 C604-273 Rose pin - AL25 C604-354 Castle nut 18.30 C604-400 Mounting plate - AL170 23.20 7.70 34.90 7.40 34.90 12.50 10.10 1.70 Special Parts - Extended Lead Times ND-Series Available Finishes - Specify for Listed Parts XQ07-351 605 606 609 612 613 • • 6 • • Part Number Description 10-025 Strike, 7/8" flat lip XQ07-351* 10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8", and 1 1/2") * 622 625 626 • • • • Price Each $44.00 212.00 Specify lip length Price Book 8 82 619 Effective April 4, 2020 • Rev. 04/20 643e 626AM • Screws, Screw Packs Torx Screw Packs, Cylinder Reference Table Parts • AL Screws Available Finishes - Specify for Listed Parts A501-171, A501-746, C603-256, C603-897 605 606 609 612 613 619 622 625 626 • • 6 • • • • • • Description Washer, thru bolt - AL170 A501-746* Mounting, thru bolt - AL170 POH Machine A700-032* Chassis PFH Cross Recess C603-256* ANSI strike PFH Combo 12-24 x 1" 1.00 C603-897* Latch and strike PFH Combo #8 x 3/4" 0.94 C604-395* Spring cage screws PFH Machine 8-32 x 2 1/8" 2.00 L583-133* Mounting surface - AL170 Sheet Metal #8 x 1" 0.96 * Type — Size — Price Each 1/4" 20 x 2 1/2" $1.20 • CYLINDRICAL Part Number A501-171* 643e 626AM 10-32 x 3/8" Order in multiples of 100 Screw Packs Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 • • 6 • • • • • • Contents Price Each (4) C603-897 $8.60 C203-736 ANSI strike (2) C603-256 6.80 C303-438 Spring cage screws 4.90 C303-029 Mounting C303-421 Mounting, AL170 (2) C604-395 (4) C603-897 (2) C603-256 (2) C604-395 (1) M504-271 (1) A501-167 (1) A501-171 (1) A501-746 (2) L583-133 (1) M504-271 643e 626AM • A-Series B202-517, C203-736, C303-029, C303-421 Part Number Description B202-517 Latch and strike 17.10 AL-13 12.60 Torx Screw Packs Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 • • 6 • • • • • • Contents 643e 626AM • ALX-Series C203-311, C203-312 Part Number Description C203-311** Latch and strike Price Each (4) C503-766 (T-15) (2) C503-766 (T-15) C203-312** Latch and ANSI strike (2) L583-371 (T-20) ** Torx screw packs are furnished with appropriate T-xx installation tool(s) $21.90 Cylinder Reference Table Cylinder Mechanism Standard Everest SL (R/B Keyways only) Primus 91-006 20-728 20-728-XP 20-528-XP Primus UL437 XP 91-506-XP Everest SL UL437-XP 21-021 Standard 91-706-XP Design Price Each - Open Price Each - Restricted $65.00 $83.00 83.00 Standard Functions 145.00 All 145.00 ND-Series 20-528 Primus XP Everest SL Primus XP (R/B Keyways only) Primus UL437 Function D-Series Part Number 21-020 179.00 96.00 AL85 114.00 NOTE: When ordering sold separate parts specify part number and the finish. Price Book 8 Effective April 4, 2020 • Rev. 04/20 83 AL ND-Series D-Series ALX-Series AL-14 A-Series CYLINDRICAL Notes Price Book 8 84 Effective April 4, 2020 • Rev. 04/20 ALX Series GRADE 2 CYLINDRICAL LEVERED LOCK Outside Lever Lever Pack options / function: Closed Lever (CL) - 10 KIL only - 40, 44 KIL, FSIC, SFIC - 50, 53, 70, 80 Outside Functional Components Function kit components Chassis Assembly & Outside Rose Chassis kit component 70 Inside Spring cage Chassis kit component 44 80 40 5 70 0, 5 , 8 3, 0 53 , 50 44 40, 10 ,4 0, 4 4 Inside Functional Components Function kit components Inside Rose Chassis kit component Reversible Latches Function kit component Inside Lever Lever Pack options / function: Closed Lever (CL) – 10, 70, 80 Button (BT) – 40, 44, 50, 53 ANSI Strike Chassis kit component Exploded view details the component groupings for each function. All factory configured locks come with proper functional components installed in the lock. See kit details for information on how kit product delivery system can be ordered and managed. Price Book 8 Effective April 4, 2020 • Rev. 04/20 85 ALX Series A-Series CYLINDRICAL Ordering Procedures To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Lock Cyl Item Qty Brand Series Func Suffix DES FIN 1 2 Inside 1 DES 1 10 SCH ALX 53 P SAT 626 2 10 SCH ALXV 40 - SAT 626 3 10 SCH ALXV 80 J RHO 622 4 10 SCH ALX 70 R LON 643e LAT 5 10 SCH ALX 53 M 8RO 626 8RO 6 10 SCH ALX 80 P LLL 619 7 10 SCH ALX 50 L LLL 626 8 10 SCH ALX 172 - BRK 643e BRW FIN SAT 605 Latch Part # Strike Part # Dr Thk 47267048 10-013 14-042 RHO 605 Ext Keyway Hand N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A C Inside design defaults to outside specifications until something is entered Examples include: fire latch, T strike, master keying requirements, Allegion Connect, Primus program information, etc. AL-Series Shaded items defaults to factory standard if not specified. 2 ND-Series D-Series ALX-2 Common Pricing Information 1. Configured locks are furnished with standard features unless otherwise specified. 2. Door thickness ranges from 1 3/8” through 1 3/4” without needing to be specified 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6-pin cylinders keyed 5-pin with 5-pin keys. Locks specified 0-bitted will receive 6-pin cylinders with 6-pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 for brass finishes, 626 for silver finishes, 622 & 643e 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charged at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 86 Effective April 4, 2020 • Rev. 04/20 Other N/A N/A K510-066 N/A N/A N/A N/A N/A N/A Introduction ALX Table of Contents Product Identification Functions ALX-4 Trim ALX-5 ALX-6 Complete Locks Kit System Instructions ALX-7 ALX-8 Kit system Pricing Lock Options / Parts Chassis Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALX-9 Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALX-9 Tailpieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALX-9 Latches and Accessories . . . . . . . . . . . . . . . . . . . . . . . ALX-10 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALX-10 Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALX-11 Levers and Roses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALX-12 Levers and Screw options . . . . . . . . . . . . . . . . . . . . . . ALX-13 See Cylinders Section Complete Cylinders How To Order Forms & Examples ALX/ALXV 53 P CYLINDRICAL Cylinder Suffix P = Conventional, 6 Pin / Keyed 5 P6 = Conventional, 6 Pin Z = Conventional - SL L = Less Conventional, 6 Pin R = FSIC M = FSIC - SL T = FSIC - Construction Core J = Less FSIC G7 = SFIC 7Pin Slide Capping Construction Core BDC = SFIC Disposable A-Series Construction Core H = SFIC Refundable B = Less SFIC Function Lock Series ALX = Standard ALXV = Vandlgard AL-Series SFIC = Small Format (Best® Style) Interchangeable Core Finish Codes and Descriptions ALX-3 Code Description 605 (US 3) Bright Brass 606 (US 4) Satin Brass 612 (US 10) Satin Bronze 613 (US 10B) Oil Rubbed Bronze 619 (US 15) Satin Nickel 622 (US 19) Matte Black 625 (US 26) Bright Chromium Plated 626 (US 26D) Satin Chromium Plated 626AM Antimicrobial Coating on Satin Chromium 643e (US11) Aged Bronze D-Series Standard Features ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. 1 1/8" x 2 1/4" Square corner faceplate, 7/8” housing diameter with 1” dia. sleeve, 1/2" throw 1 1/4" x 4 7/8” ANSI, Square corner, no dust box 2 3/4" Conventional 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/8" through 1 3/4" Two nickel silver cut keys per lock, 6-pin, S123 section ND-Series Certification Latch Strike Backset Cylinder Door Range Keys Price Book 8 Effective April 4, 2020 • Rev. 04/20 87 ALX • Functions ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. Keyed Locks SCHLAGE ANSI ALX10S F75 Passage Latch ALX/ALXV50PD F82 ALX/ALXV40 F76 Bath/Bedroom Privacy Lock ALX/ALXV53PD F109 ALX/ALXV44S F76 Hospital Privacy Lock ALX/ALXV70PD F84 ALX-4 AL-Series A-Series CYLINDRICAL Non-Keyed Locks ND-Series D-Series ALX170 ALX172 SCHLAGE •N o cylinder; plain lever both sides; spring latch • Both levers always unlocked •N o cylinder; coin turn outside; pushbutton inside; spring latch • Inside push button locks outside lever • Turn inside lever or close door to release button and prevent lockout; outside coin turn provides emergency access • Field selectable Vandlgard® feature • Inside lever is always free for immediate egress • No cylinder; emergency turn outside; push button inside; spring latch • Inside push button locks outside lever • Turn inside lever or close door to release button and prevent lock-out; outside emergency turn provides immediate access for life safety • Field selectable Vandlgard® feature • Inside lever is always free for immediate egress Single Dummy Trim •N o cylinder; rigid plain lever outside; no hardware inside; no latch • Use as door pull or matching inactive trim Entrance/Office Lock •C ylinder outside; push button inside; deadlatch • Inside push button locks outside lever •U nlock with key or by rotating inside lever • Field selectable Vandlgard® feature • Inside lever always free for immediate egress Entrance Lock •C ylinder outside; push/turn button inside; deadlatch • Inside button locks outside lever by pushing button or pushing and turning button • Pushed button: unlock with key or by rotating inside lever • Push/turn button: key retracts latch only; unlock by returning button to home position then use key or rotate inside lever • Field selectable Vandlgard® feature • Inside lever always free for immediate egress Classroom Lock •C ylinder outside; plain lever inside; deadlatch • Key locks or unlocks outside lever • Field selectable Vandlgard® feature • Inside lever always free for immediate egress ALX/ALXV80PD F86 Double Dummy Trim •N o cylinder; rigid plain levers both sides; no latch (latch cover available) • Use as door pull or matching inactive trim Price Book 8 88 ANSI Effective April 4, 2020 • Rev. 04/20 Storeroom Lock • Cylinder outside; plain lever inside; deadlatch • Outside lever always locked • Key retracts the latch • Field selectable Vandlgard® feature • Inside lever always free for immediate egress Complete Locks • ALX Trim Lever: ATH - Athens Rose: Rhodes Lever: OME - Omega Rose: Omega Lever: BRW - Broadway Rose: Rhodes Lever: BRK - Boardwalk Rose: Rhodes Lever Grade: 1 Cores: KIL, FSIC, SFIC Lever: RHO - Rhodes Rose: Rhodes A-Series Lever Grade: 1 Cores: KIL, FSIC, SFIC CYLINDRICAL Lever Grade: 1 Cores: KIL, FSIC, SFIC, L-SAR, L-CO6, J-SAR, J-CO6 Lever Grade: 1 Cores: KIL, FSIC, SFIC, L-SAR, L-CO6, J-SAR, J-CO6, J-CO7 Lever: SAT - Saturn Rose: Rhodes AL-Series Lever Grade: 1 Cores: KIL, FSIC, SFIC Lever: LON - Longitude Rose: Rhodes Lever: TLR - Tubular Rose: Rhodes ND-Series Lever Grade: 1 Cores: KIL, FSIC, SFIC Lever Grade: 1 Cores: KIL, FSIC, SFIC, L-SAR, L-CO6, J-SAR, J-CO6 D-Series Lever Grade: 1 Cores: KIL, FSIC, SFIC Lever: SPA - Sparta Rose: Rhodes ALX-5 Lever: LAT - Latitude Rose: Rhodes Lever Grade: 2 Cores: KIL Lever Grade: 1 Cores: KIL, FSIC, SFIC, L-SAR, L-CO6, J-SAR, J-CO6 Price Book 8 Effective April 4, 2020 • Rev. 04/20 89 ALX • Complete Locks Designs and Finishes SAT CYLINDRICAL Function Decription 626 605 606 612 619 622 625 643e 613 626AM 186 198 216 212 224 242 CYLINDER ADJUSTMENTS Keyless ALX10 Passage ALX/ALXV40 Privacy ALX/ALXV44 Privacy, hospital ALX170 Single dummy 115 121 131 ALX172 Single dummy 175 187 205 605 606 612 619 622 625 626 643e 613 626AM A-Series Keyed, Single Cylinder (P/P6/Z core options are the baseline for cylinder adjustments) ALX/ALXV50 Entrance/Office ALX/ALXV53 Entrance ALX/ALXV70 Classroom ALX/ALXV80 Storeroom 271 283 L 301 -65 EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS 18 Secondary EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) Cylinder PRIMUS/PRIMUS XP - FULLY ASSEMBLED PRODUCT NEEDS TO HAVE THE LOCK ORDERED Adjustments LESS CYLINDER AND THE CYLINDER SEPERATELY (PRICES BELOW) SINGLE KIL EXAMPLE: 1 EA. AL53LD & 1 EA. 20-728(-XP) 145 Note: Underlined options have extended lead times. See lead time report for details. Designs and Finishes Primary Cylinder Adjustments (Available Options) AL-Series ATH BRW BRK LAT LON OME RHO SPA TLR Function Decription 626 605 606 612 613 619 622 625 626AM 643e Keyless ALX10 Passage ALX/ALXV40 ALX/ALXV44 ALX170 ALX172 Privacy Privacy, hospital Single dummy Single dummy 206 218 236 232 244 262 135 195 141 207 151 225 R, M T L B BDC J G H ATH BRW BRK LAT LON OME RHO SPA TLR L-SAR L-CO6 J-SAR J-CO6 J-CO7 ATH RHO SPA TLR 605 606 612 619 622 625 626 643e 613 626AM 605 606 612 619 622 625 626 643e 613 626AM ALX-6 Keyed, Single Cylinder (P / P6 core options are the baseline for cylinder adjustments) ALX/ALXV50 ALX/ALXV53 ALX/ALXV80 ALX/ALXV70 Entrance/Office Entrance Storeroom Classroom 291 303 321 -65 39 -36 N/C 87 45 N/C EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS Everest D & T Family & Restricted Keyways (QUAD, NUMBERED, REVERSE) 18 157 Single FSIC Example: 1 EA. AL53LD & 1 EA. 20-740(-XP) ND-Series D-Series Not Available Secondary SL Cylinder with Everest B or Everest R keyways 18 Not Available Cylinder PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW) Adjustments Single KIL Example: 1 EA. AL53LD & 1 EA. 20-728(-XP) 145 Not Available Note: Underlined options have extended lead times. See lead time report for details. Price Book 8 90 Effective April 4, 2020 • Rev. 04/20 RHO Not Available Kit System • ALX Cylindrical Kit Ordering Details: Building Locks with Kits: Chassis Kits: Order Elements QTY (1 / Item) Series 1 # Examples: Order Elements 1 10 2 25 ALX Kit Code Finish CK 1 Rose Strike Rhodes ANSI (03-042) (47267038) Options1: 605 606 612 613 619 622 625 626 643e Specifiable Elements ALX CK 626 ALX CK 622 # ALX FK Function 1 Examples: Order Elements Finish Backset 2 3 Options1: Options1: 605 234 606 (47267038 612 or 47267042) 613 619 238 622 (47267048 625 or 47267052) 626 643e Specifiable Elements 1 10 ALX FK 40 622 238 2 25 ALX FK 53 626 234 Lever Packs: LINE QTY ITEM (5 / Item) Series 1 # SCH LP 1 Examples: CK 622 2 Function Kit ALX FK 40 622 238 3 Lever Pack - Outside Lever Pack - Inside SCH LP KIL BT 622 SAT Kit Description Series/ Part Kit Backset/ Lever Style Funct./ Core Finish 1 Chassis Kit ALX CK 626 2 Function Kit ALX FK 80 626 234 3 Lever Pack - Outside Lever Pack - Inside SCH LP BT FSIC 626 ATH 4 Cylinder + Tailpiece 23-030 + N523-127 626 Desired Lock: ALXV50 with KIL core, Latitude levers, 613 finish, and a 2-3/4" backset Step Kit Description Series/ Part Kit Funct./ Core Finish Backset/ Lever Style 1 Chassis Kit ALX CK 613 2 Chassis Modification - Vandlgard ALX FK 80 626 234 3 Function Kit ALX FK 50 613 234 4 Lever Pack - Outside Lever Pack - Inside SCH LP BT KIL 613 LAT 5 Cylinder + Tailpiece 21-020 613 Finish Lever Style 2 3 Options1: Options1: 605 ATH 606 BRK 612 BRW 613 LAT 619 LON 622 RHO 625 SAT 626 SPA 643e TLR Chassis Funct. Core + Lock Description Locks = Kit Kit Tailpiece $224 = $136 $62 ALX80 R ATH 626 $329 = $124 $57 ALXV50 P LAT 613 $321 $154 $57 ALX40 SAT 622 SCH LP KIL 626 SAT 2 25 SCH LP BT 626 SAT $13 $13 $73 + $3 $49 $23 $64 $23 $23 • Specifying finish for: • (2) Rhodes Roses • ANSI Strike • ANSI strike comes with pre-installed screws Chassis Kit Specifiable Elements 10 (Qty 1 of 5) (Qty 1 of 5) Kit Details: Function Kits 1 = Outside Inside Lever Lever Lever Packs 1) I f desired feature isn’t shown in the available options, it needs to be ordered via a fully configured lock or as a part 2) Confirm available lever core / style options on the Trim page Individual Kit • All function kits include latches • 2 3/4” backset latches use 1 1/8” x 2 1/4” faceplate • 2 3/8” backset latches use 1” x 2 1/4” faceplate • All latches have: • Sleeves to support 1” latch bore • Pre-installed screws • Locksmith (LS) 5 functions mix pack available • Needs function and cylinder format to understand outside and inside lever combinations Price Book 8 Effective April 4, 2020 • Rev. 04/20 91 ND-Series Order Elements ALX D-Series Options: CL (closed) BT (button) KIL (Open/ KIL) FSIC SFIC L SAR J SAR L CO6 J CO6 J CO7 Chassis Kit Kit Pricing Analysis: Specifiable Elements Core (Options Kit limit lever Code style) Funct./ Core Finish ALX-7 Order Elements Kit AL-Series Options: 10 40 44 50 53 70 80 LS Series/ Part A-Series 1 Kit Code Kit Description 1 Step Specifiable Elements LINE QTY ITEM (5 / Item) Series Step Backset/ Lever Style Desired Lock: ALX80 with FSIC core, Athens levers, 626 finish, and a 2-3/4" backset Function Kit Packs: Order Elements Desired Lock: ALX40 with Saturn levers, 622 finish, and a 2-3/8" backset CYLINDRICAL LINE ITEM Specifiable Elements Support Components ALX Kit System STEP 1 - Specify chassis kit finish Finishes ALX-8 AL-Series A-Series CYLINDRICAL Chassis Kit EX: ALX CK 613 ALX CK XXX Kit Description (Shipped 1 per box) Grade 2 capable chassis kit with Rhodes roses and ANSI strike- specify finish 626 605 606 612 619 622 625 643e 613 $124 $136 $154 STEP 2 - Specify function, finish, and backset Finishes Function Kit EX: ALX FK 40 613 238 Kit Description (Shipped 5 per box) 626 Keyless - A single function in packs of 5 ALX FK 10 XXX 234 Passage function kits with 2-3/4" backset latch - specify finish ALX FK 10 XXX 238 Passage function kits with 2-3/8" backset latch - specify finish ALX FK 40 XXX 234 Privacy function kits with 2-3/4" backset latch - specify finish ALX FK 40 XXX 238 Privacy function kits with 2-3/8" backset latch - specify finish ALX FK 44 XXX 234 Hospital Privacy function kits with 2-3/4" backset latch - specify finish ALX FK 44 XXX 238 Hospital Privacy function kits with 2-3/8" backset latch - specify finish Keyed - A single function in packs of 5 ALX FK 50 XXX 234 Entrance/Office function kits with 2-3/4" backset latch - specify finish ALX FK 50 XXX 238 Entrance/Office function kits with 2-3/8" backset latch - specify finish ALX FK 53 XXX 234 Entrance function kits with 2-3/4" backset latch - specify finish ALX FK 53 XXX 238 Entrance function kits with 2-3/8" backset latch - specify finish ALX FK 70 XXX 234 Classroom function kits with 2-3/4" backset latch - specify finish ALX FK 70 XXX 238 Classroom function kits with 2-3/8" backset latch - specify finish ALX FK 80 XXX 234 Storeroom function kits with 2-3/4" backset latch - specify finish ALX FK 80 XXX 238 Storeroom function kits with 2-3/8" backset latch - specify finish Locksmith Mix Pack - 5 individual functions ALX FK LS XXX 234 One each of a 10/40/50/53/80 function kits with 2-3/4" backset latch - specify finish ALX FK LS XXX 238 One each of a 10/40/50/53/80 function kits with 2-3/8" backset latch - specify finish 605 606 612 619 622 625 643e 613 $180 310 285 $269 STEP 3 - Specify lever pack core, finish, and style (Core Types defined by function and cylinder needs) Lever Pack Options (Shipped 5 per box) Lever Packs EX: SCH LP SFIC 613 LAT SCH LP CORE XXX STYLE SCH LP CORE XXX STYLE SCH LP CORE XXX STYLE SCH LP CORE XXX STYLE SCH LP CORE XXX STYLE SCH LP CORE XXX STYLE Cores Finishes Styles CL (Closed), BT (Button), KIL CL (Closed), BT (Button), KIL FSIC SFIC L-SAR, L-CO6, J-SAR, J-CO6 J-CO7 626 SAT ATH BRW BRK LAT LON RHO SPA TLR ATH BRW BRK LAT LON RHO SPA TLR ATH BRW BRK LAT LON RHO SPA TLR ATH RHO SPA TLR RHO 605 606 612 619 622 625 643e 613 $65 115 245 375 STEP 4 - Select cylinder kit or bulkpack option (if necessary) D-Series (Individual cylinders are listed in the Cylinders table) Cylinder Kits (Specify finish when ordering) Kit Description (See description for qty) 40-100 Everest, Everest 29, Classic - 1 Preassembled 0-bitted KIL cylinder, 4 Tailpieces, 4 Keyblanks 40-700 / XP 40-500 / XP Primus / XP - 1 Preassembled 0-bitted KIL cylinder, 4 Tailpieces Primus / XP - UL437 - 1 Preassembled 0-bitted KIL cylinder, 4 Tailpieces 09-409 Classic - Bulk Pack - components needed for 10 KIL cylinders 09-751 ND-Series Finishes 09-764 09-833 09-411 09-753 09-766 09-836 09-416 Open Restricted Open Everest, Everest 29 - Bulk Pack - components needed for 10 KIL cylinders Restricted Primus/ XP - Everest / 29 - Bulk Pack - components needed for 10 KIL cylinders Primus/ XP - Classic - Bulk Pack - components needed for 10 KIL cylinders Classic - Bulk Pack - components needed for 10 FSIC cylinders Open Everest, Everest 29 - Bulk Pack - components needed for 10 FSIC cylinders Open Primus/ XP - Everest / 29 - Bulk Pack - components needed for 10 FSIC cylinders Primus/ XP - Classic - Bulk Pack - components needed for 10 FSIC cylinders Classic, Everest, 29, Primus - Bulk Pack - 10 ND/ALX A700-031 Tailpiece Price Book 8 92 Effective April 4, 2020 • Rev. 04/20 626 605 606 612 619 622 625 643e $66 146 179 518 678 518 678 1025 1025 626 626 1071 1071 13.40 613 Parts • ALX Configured Lock Options Chassis Components Conf. Lock Specification Sold Separate Part Number 47267022 2 Chassis Assembly - universal Conf. Lock Adjustment Sold Separate 10, 40, 44, 50, 53, 70, 80 $165.00 47268754 Chassis Assembly - exterior 170 170 $50.00 47268755 Chassis Assembly - exterior 172 172 $50.00 47268756 Chassis Assembly - interior 172 47267025 Inside Spring Cage Assembly 472670291 Exterior Coin Turn 47267028 Exterior Emergency Turn 1 472670301 172 $50.00 10, 40, 44, 50, 53, 70, 80 $105.00 Interior Push Button 40 N/A $65.00 44 $120.00 40, 44, 50 $18.00 47267031 Interior Push/Turn Button 53 $20.00 47272158 Keycam Timing Tool 70 $5.00 Plunger - Storeroom 80 $15.00 1 47266454 1 1 When ordering sold separate parts specify part number and the finish 2 Not compatible with AL latches CYLINDRICAL N/A Assemblies and related functions A-Series Cylinders Conf. Lock Specification Sold Separate Part Number Sold Separate N/A $66.00 N/A + 39.00 $75.00 (open) N/A + 87.00 $87.00 Conf. Lock Adjustment Sold Separate 21-020 50, 53, 80 A700-031 23-195 70 47270197 91-018 50, 53, 80 N523-022 91-118 70 47270197 R 23-030 50, 53, 70, 80 M 91-161 50, 53, 70, 80 T 23-030-ICX 50, 53, 70, 80 P, P6 Z G 80-037 50, 53, 70, 80 H 80-035 50, 53, 70, 80 1 AL-Series Conf. Lock Adjustment Supported functions & included tailpieces When ordering sold separate parts specify part number and the finish Conf. Lock Specification P, P6 L, Z G, H A700-031 47270197 N523-022 47270197 N523-127 47269168 N523-091 47269620 L SAR 09-060 Cylinder format and related functions Schlage KIL Schlage KIL High Security Schlage FSIC Schlage SFIC 50, 53, 80 70 $13.80 50, 53, 80 70 50, 53, 80 $3.10 70 50, 53, 80 70 Sargent KIL 50, 53, 80 N/A $12.40 09-063 Sargent FSIC 50, 53, 80 10-140 Corbin Russwin KIL 50, 53, 80 J CO6 09-062 Corbin Russwin FSIC 6 PIN 50, 53, 80 J CO7 10-141 Corbin Russwin FSIC 7 PIN 50, 53, 80 09-774 SFIC driver and spacer 50, 53, 80 D500-000 SFIC 6 pin body spacer 50, 53, 80 $1.70 XN12-292 Sargent XC SFIC 50, 53, 80 $13.40 ND-Series J SAR L CO6 N/A D-Series R, M, T Sold Separate Part Number ALX-9 Tailpieces $15.50 Price Book 8 Effective April 4, 2020 • Rev. 04/20 93 ALX • Parts Configured Lock Options Latches CYLINDRICAL Conf. Lock Specification Sold Separate Part Number Backset/Function - Faceplate Description (Latches will accommodate 1"" or 7/8"" door prep. diameters unless otherwise stated) Conf. Lock Adjustment Sold Separate N/C $58.00 Spring Latch3 47267038 47273614 47267039 47273615 2 3/4" Restoring - 1 1/8” x 2 1/4” Square corner 2 3/4" Restoring - 1” x 2 1/4” Square corner 47267041 47273616 2 3/4" Restoring - 1” x 2 1/4” Round corner 47267046 47273620 2 3/8" Restoring - 1 1/8” x 2 1/4” Square corner 47267048 47273621 2 3/8" Restoring - 1” x 2 1/4” Square corner 47267050 47273622 2 3/8" Restoring - 1” x 2 1/4” Round corner 47272024 47272024 2 3/4" Restoring (1" Hsg Dia only) - 1 1/8” x 2 1/4” Square corner (based on 13-248) + 31.70 $90.10 14-010 14-010 3 3/4" Non-Restoring (1" Hsg Dia only) - 1 1/8” x 2 1/4” Square corner + 51.10 $111.00 47273617 47273618 47273619 47273623 47273624 47273625 13-247 14-028 14-042 2 3/4" Non-Restoring - 1 1/8” x 2 1/4” Square corner 2 3/4" Non-Restoring - 1” x 2 1/4” Square corner 2 3/4" Non-Restoring - 1” x 2 1/4” Round corner 2 3/8" Non-Restoring - 1 1/8” x 2 1/4” Square corner 2 3/8" Non-Restoring - 1” x 2 1/4” Square corner 2 3/8" Non-Restoring - 1” x 2 1/4” Round corner 2 3/4" Non-Restoring (1" Hsg Dia only) - 1 1/8” x 2 1/4” Square corner 3 3/4" Non-Restoring (1" Hsg Dia only) - 1 1/8” x 2 1/4” Square corner "2 3/4"" Non-Restoring Antifriction Fire Latch (1"" Hsg Dia only) 1 1/8” x 2 1/4” Square corner" N/C $58.00 + 32.70 + 51.10 $92.80 $111.00 + 298.00 $369.00 + 34.10 + 34.10 Deadlatch3 A-Series 47267042 47267043 47267045 47267051 47267052 47267054 13-247 14-028 14-042 Miscellaneous Options 43-005 43-005 AL-Series LLL N/A 37-001 N/A N/A N/A N/A N/A N/A A501-565 A501-566 A501-567 24483760 39-030 472691993 ALX-10 Note 5" - Backset extension link - requires reinforcement when used in hollow metal door applications; backset link must be used with 2 3/4" backset latches Less Latch - 60.00 Steel door reinforcer kit - after specifying door thickness, kit will include A501-567 and A501-565 or A501-566 1 3/84” thick hollow steel door reinforcer. Fits both 7/8” and 1” diameter housings. 1 3/4” thick hollow steel door reinforcer. Fits both 7/8” and 1” diameter housings. 3 1/2" hollow steel door latch reinforcement sleeve for use with 41-005. 1 3/4” thick hollow steel/aluminum door reinforcer. Fits 1” diameter housings. Rabbeted latch and strike kit Blank latch plate kit N/A N/A N/A N/A N/A N/A N/A $40.50 $20.40 $12.70 $5.60 $59.80 $33.00 Highlighted part numbers are standard options for fully assembled locks, 626AM not available for latch faceplates 1 Latches come with pre-installed screws in lock assemblies except in cases where the sold separate part number is listed. Sold separate part numbers come with separate fasteners. 2 Latches are not compatible with AL chassis 3 When ordering sold separate parts specify part number and the finish Strikes D-Series Conf. Lock Specification 10-013 10-013 112 10-016 47267101 10-025 138 10-025 112 LLL K510-066 ND-Series Notes Sold Separate Part Number 10-013 118 10-013 112 10-016 10-025 1316 10-025 138 10-025 112 N/A K510-066 Lip Length - Description 1 1/8" - Square corner T-strike, dust box, 1 1/8" x 2 3/4" 1 1/2" - Square corner T-strike, dust box, 1 1/8” x 2 3/4” 1 1/8" - Square corner T-strike with deep dust box for 3/4" fire latch, 1 1/8” x 2 3/4” 1 3/16" - ANSI, no box, 1 1/4” x 4 7/8” 1 3/8" - ANSI, no box, 1 1/4” x 4 7/8” 1 1/2" - ANSI, no box, 1 1/4” x 4 7/8” Less Strike Box for ANSI strike, must be specified Sold Separate N/C $15.70 + 29.40 $45.00 - 15.70 N/C $7.00 Highlighted part numbers are standard options for fully assembled locks, 626AM not available for strikes. 1 Strikes come with pre-installed screws in lock assemblies except in cases where the sold separate part number is listed. Sold separate part numbers come with separate fasteners. 2 All sold separate strikes need a finish call out. Price Book 8 94 Conf. Lock Adjustment Effective April 4, 2020 • Rev. 04/20 Parts • ALX Configured Lock Options Levers - Schlage Options SATURN ATHENS RHODES SPARTA OMEGA TUBULAR BRW 47258043 BROADWAY BRK LAT LON 8AT 8RO 8SP 8TR 8BY 8BK 8LT 8LN SAT ATH RHO SPA OME TLR BRW BRK LAT LON 8AT 8RO 8SP 8TR 8BY 8BK 8LT 8LN 47258044 47258045 47258046 03-230 8AT 03-230 8RO 03-230 8SP 03-230 8TR 47260541 47260542 47260543 47260544 47260501 03-233 ATH 03-233 RHO 03-233 SPA 03-233 OME 03-233 TLR 47258055 47258056 47258057 47258058 03-233 8AT 03-233 8RO 03-233 8SP 03-233 8TR 47260553 47260554 47260555 47260556 BOARDWALK LATITUDE LONGITUDE ATHENS - TACTILE RHODES - TACTILE SPARTA - TACTILE TUBULAR - TACTILE BROADWAY - TACTILE BOARDWALK - TACTILE LATITUDE - TACTILE LONGITUDE - TACTILE SATURN ATHENS RHODES SPARTA OMEGA TUBULAR BROADWAY BOARDWALK LATITUDE LONGITUDE ATHENS - TACTILE RHODES - TACTILE SPARTA - TACTILE TUBULAR - TACTILE BROADWAY - TACTILE BOARDWALK - TACTILE LATITUDE - TACTILE LONGITUDE - TACTILE CLOSED - CL BUTTON - BT SATURN ATHENS RHODES SPARTA OMEGA TUBULAR BROADWAY BOARDWALK LATITUDE LONGITUDE ATHENS - TACTILE RHODES - TACTILE SPARTA - TACTILE TUBULAR - TACTILE BROADWAY - TACTILE BOARDWALK - TACTILE LATITUDE - TACTILE LONGITUDE - TACTILE See Lever Packs 1 KIL/Open - P, Z, L Less Lever (per lever) $130.00 + 20.00 $140.00 + 47.00 $187.00 N/C $130.00 + 20.00 $140.00 + 46.00 $187.00 N/C $130.00 + 20.00 $140.00 + 46.00 $187.00 ND-Series 47262743 03-231 ATH 03-231 RHO 03-231 SPA 03-231 OME 03-231 TLR 47258047 47258048 47258049 47258050 03-231 8AT 03-231 8RO 03-231 8SP 03-231 8TR 47260545 47260546 47260547 47260548 N/A N/C D-Series SAT ATH RHO SPA OME TLR BRW BRK LAT LON 8AT 8RO 8SP 8TR 8BY 8BK 8LT 8LN LLL Sold Separate ALX-11 47260493 03-230 ATH 03-230 RHO 03-230 SPA 03-230 OME 03-230 TLR Conf. Lock Adjustment AL-Series SAT ATH RHO SPA OME TLR Lever Type & Style A-Series Sold Separate Part Number CYLINDRICAL Conf. Lock Specification - 13.00 When ordering sold separate levers specify part number and the finish Price Book 8 Effective April 4, 2020 • Rev. 04/20 95 ALX • Parts Configured Lock Options Levers - Schlage Options D-Series ALX-12 AL-Series A-Series CYLINDRICAL Conf. Lock Specification Sold Separate Part Number Lever Type & Style ATH 03-232 ATH ATHENS RHO 03-232 RHO RHODES SPA 03-232 SPA SPARTA OME 03-232 OME OMEGA TLR 03-232 TLR TUBULAR BRW 47258051 BROADWAY BRK 47258052 BOARDWALK LAT 47258053 LATITUDE LON 47258054 FSIC - R, J, T, M 8AT 03-232 8AT ATHENS - TACTILE 03-232 8RO RHODES - TACTILE 8SP 03-232 8SP SPARTA - TACTILE 8TR 03-232 8TR TUBULAR - TACTILE 8BY 47260549 BROADWAY - TACTILE 8BK 47260550 BOARDWALK - TACTILE 8LT 47260551 LATITUDE - TACTILE 8LN 47260552 LONGITUDE - TACTILE ATH 03-200 ATH ATHENS RHO 03-200 RHO RHODES SPA 03-200 SPA SPARTA OME 03-200 OME OMEGA TLR 03-200 TLR TUBULAR BRW 47258039 BROADWAY BRK 47258040 BOARDWALK LAT 47258041 47258042 + 20.00 $140.00 + 46.00 $187.00 + 20.00 $140.00 + 46.00 $187.00 Conf. Lock Adjustment Sold Separate N/C $107.00 LATITUDE SFIC - BDC, B, G, H LONGITUDE 8AT 03-200 8AT ATHENS - TACTILE 8RO 03-200 8RO RHODES - TACTILE 8SP 03-200 8SP SPARTA - TACTILE 8TR 03-200 8TR TUBULAR - TACTILE 8BY 47260537 BROADWAY - TACTILE 8BK 47260538 BOARDWALK - TACTILE 8LT 47260539 LATITUDE - TACTILE 8LN 47260540 LONGITUDE - TACTILE 1 Sold Separate LONGITUDE 8RO LON Conf. Lock Adjustment When ordering sold separate levers specify part number and the finish Roses Conf. Lock Specification Sold Separate Part Number ND-Series N/A LLL 03-042 RHO RHODES - SAT, ATH, RHO, SPA, TLR, BRW, BRK, LAT, LON 03-042 OME OMEGA - OME N/A 1 Lever Type & Style - 15.00 Less Rose (per rose) When ordering sold separate roses specify part number and the finish Price Book 8 96 Effective April 4, 2020 • Rev. 04/20 Parts • ALX Configured Lock Options Levers - Competitor Options Conf. Lock Specification Sold Separate Part Number Sold Separate N/C $260.00 + 46.00 $307.00 N/C $260.00 + 46.00 $307.00 N/C $260.00 + 46.00 $307.00 N/C $260.00 + 46.00 $307.00 RHODES N/C $260.00 RHODES - TACTILE + 46.00 $307.00 Conf. Lock Adjustment Sold Separate ATH 03-244 ATH ATHENS RHO 03-244 RHO RHODES SPA 03-244 SPA SPARTA TLR 03-244 TLR SARGENT KIL - L SAR TUBULAR 8AT 03-244 8AT 8RO 03-244 8RO RHODES - TACTILE 8SP 03-244 8SP SPARTA - TACTILE 8TR 03-244 8TR TUBULAR - TACTILE ATHENS - TACTILE ATH 03-277 ATH ATHENS RHO 03-277 RHO RHODES SPA 03-277 SPA SPARTA TLR 03-277 TLR SARGENT FSIC 6 PIN - J SAR TUBULAR 03-277 8AT 03-277 8RO RHODES - TACTILE ATHENS - TACTILE 8SP 03-277 8SP SPARTA - TACTILE 8TR 03-277 8TR TUBULAR - TACTILE ATH 03-234 ATH ATHENS RHO 03-234 RHO RHODES SPA 03-234 SPA SPARTA TLR 03-234 TLR 8AT 03-234 8AT 8RO 03-234 8RO RHODES - TACTILE 8SP 03-234 8SP SPARTA - TACTILE TUBULAR ATHENS - TACTILE 03-234 8TR TUBULAR - TACTILE 03-266 ATH ATHENS RHO 03-266 RHO RHODES SPA 03-266 SPA SPARTA TLR 03-266 TLR 8AT 03-266 8AT 8RO 03-266 8RO RHODES - TACTILE 8SP 03-266 8SP SPARTA - TACTILE 8TR 03-266 8TR TUBULAR - TACTILE RHO 03-235 RHO 03-235 8RO 1 TUBULAR ATHENS - TACTILE ALX-13 8RO C-R FSIC 7 PIN - J CO7 AL-Series 8TR ATH C-R FSIC 6 PIN - J CO6 A-Series 8AT 8RO C-R KIL - L CO6 CYLINDRICAL Conf. Lock Adjustment Lever Type & Style When ordering sold separate levers specify part number and the finish Fasteners Sold Separate Part Number 47262735 47262999 1 C603-256 1,2 C603-897 1,2 N/A 1 2 ALX170 through bolt assy ALX170 mounting surface ANSI strike Latch and strike Spring-chassis through bolts ND172 through bolts Chassis to outside springcage Plate to inside springcage Torx - Latch and strike 626 only PFH Combo - 12-24 x 1.5" PFH Combo - 12-24 x 1” PFH Combo - 8-32 UNC-2A PFH Machine - 10-32 UNF-2A 47266670 1 w/ thread patch 6-32 tri-point 47266669 1 Philips Shoulder Screw C203-311 (4) C503-766 (T-15) (2) C503-766 (T-15) C203-312 Torx - Latch and ANSI strike (2) L583-371 (T-20) Pricing show for quantity needed for one fastener. Sold in quantities of 50. When ordering sold separate parts specify part number and the finish N/A $15.00 $1.00 $1.00 $0.93 $2.00 $0.76 $21.90 ND-Series TORX Fastener application and details D-Series Conf. Lock Specification $21.90 Price Book 8 Effective April 4, 2020 • Rev. 04/20 97 ALX ND-Series D-Series ALX-14 AL-Series A-Series CYLINDRICAL Notes Price Book 8 98 Effective April 4, 2020 • Rev. 04/20 D Series GRADE 1 CYLINDRICAL KNOB LOCK D-Series Knobs CYLINDRICAL Exploded View - D53PD Inside knob Inside rose A-Series Outside rose AL-Series 6-Pin cylinder Outside knob Lock chassis ALX-Series ANSI strike Reversible deadlatch 1/2" Throw D-1 Production for this lock is ending soon. Contact your local representative for further details. Door Preparation 2-3/4" 1-1/8" 70 mm 29 mm ND-Series 2-1/4" 57 mm 1" dia. 25 mm 2-1/8" 54 mm Price Book 8 Effective April 4, 2020 • Rev. 04/20 99 D Series Ordering Procedures CYLINDRICAL To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 10 Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: A-Series Latch: Strike: Dr Thk: Ext: Inside Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details D53PD ORB 625 PLY 625 - 13-247 10-025 214 EE - KA Line item number Quantity Product function + Cylinder code Outside lever design Outside finish Inside lever design: Specify only if different from the outside lever design Inside lever finish: Specify only if different from the outside finish Hand of door: Required when Strikes 10-025 & 10-013 are ordered with lip length adjustments for non-standard door thickness Product latch: Leave blank for standard latch or specify part number if non-standard latch is required. Product strike: Leave blank for standard strike or specify part number if non-standard strike is required. Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4" Extension: Enter for doors 2" or greater. Example: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended differently Dimension: Enter only for non-standard strike lip length AL-Series Dim: Additional Details: Enter additional detail for keying information or special requirements ND-Series D-2 ALX-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. Idenotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 100 Effective April 4, 2020 • Rev. 04/20 Introduction D Knobs Table of Contents Product Identification D 53 P D Latch Suffix CYLINDRICAL D = Deadlatch S = Springlatch Cylinder Suffix P6 = 6-Pin Cylinder L = Less 6-Pin Cylinder R = FSIC J = Less FSIC M = SL - FSIC T = FSIC Construction Core SL Conventional Cylinder, Z = 7 pin A-Series Function Lock Series * Used for double cylinder functions. Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Satin Bronze Oil Rubbed Bronze Bright Chromium Plated Satin Chromium Plated Bright Stainless Steel Satin Stainless Steel Aged Bronze ALX-Series Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US 10) 613 (US 10B) 625 (US 26) 626 (US 26D) 629 (US 32) 630 (US 32D) 643e (US 11) AL-Series Functions D-4 D-5 Complete Locks Options D-7 Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7 Locks Less Components. . . . . . . . . . . . . . . . . . . . . . . . D-7 Non-Standard Door Thickness . . . . . . . . . . . . . . . . . D-7 Tamper Resistant Torx Screws. . . . . . . . . . . . . . . . . . D-7 Special Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7 Parts D-8 Knobs and Related Components. . . . . . . . . . . . . . . D-8 Roses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8 Latches and Related Components . . . . . . . . . . . . . D-8 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 Plunger Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 Reinforcements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9 Finished Miscellaneous Parts. . . . . . . . . . . . . . . . . . . D-9 Special Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10 Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . D-10 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11 Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11 Torx Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11 Cylinder Reference Table. . . . . . . . . . . . . . . . . . . . . . . D-11 Complete Cylinders See Cylinders Section Forms & Examples How To Order Standard Features ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door. 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw 1 1/4" x 4 7/8", ANSI, Square corner, no box 2 3/4" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/8" – 2" Two nickel silver cut keys per lock, 6-pin, S123 section D-3 Certification Latch Strike Backset Cylinder Door Range Keys ND-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 101 D Knobs • Functions CYLINDRICAL ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door. Non-Keyed Locks Keyed Locks SCHLAGE ANSI SCHLAGE ANSI D10S F75 Passage Latch Both knobs always unlocked. D70PD F84 Classroom Lock Outside knob locked and unlocked by key. Inside knob always unlocked. Exit Lock Blank plate outside. Inside knob always unlocked. D72PD F80 Communicating Lock Key in either knob locks or unlocks each knob independently. Bath/Bedroom Privacy Lock Push-button locking. Can be opened from outside with small screwdriver. Turning inside knob or closing door releases button. D73PD F90 Corridor Lock Locked or unlocked by key from outside. Push-button locking from inside. Turning inside knob or closing door releases button. D44S Hospital Privacy Lock Push-button locking. Unlocked from outside by turning emergency turn-button. Turning inside knob or closing door releases button. D80PD F86 Storeroom Lock Outside knob fixed. Entrance by key only. Inside knob always unlocked. D170 Single Dummy Trim Dummy trim for one side of door. Used for door pull or as matching inactive trim. D80PDEL Electrically Locked (Fail Safe) Outside knob continuously locked electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob always free for immediate exit. D80PDEU Electrically Unlocked (Fail Secure) Outside knob continuously locked until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob always free for immediate exit. D25D F76 AL-Series A-Series D40S ALX-Series Keyed Locks SCHLAGE ANSI D53PD F109 F88 D-4 D60PD ND-Series D66PD F91 Entrance Lock Turn/push-button locking; pushing and turning button locks outside knob, requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside knob until unlocked by key or by turning inside knob. Vestibule/Classroom Security Lock Latch retracted by key from outside when outside knob is locked by key in inside knob. Inside knob is always unlocked. D82PD F87 Institution Lock Both knobs fixed. Entrance by key in either knob. D85PD F93 Faculty Restroom Lock (with Indicator Cylinder) Outside knob fixed. Entrance by key only. Push-button in inside knob activates visual occupancy indicator, allowing only emergency masterkey to operate. Turning inside knob or closing door releases visual occupancy indicator. Rotation of inside spanner-button provides lock-out feature by keeping indicator thrown. Store Lock Key in either knob locks or unlocks both knobs. Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Price Book 8 102 Effective April 4, 2020 • Rev. 04/20 Complete Locks • D Knobs Orbit (ORB) Plymouth (PLY) Tulip (TUL) CYLINDRICAL Roses Inside/Outside Rose - Plymouth Knobs: Plymouth Size: 2 1/2" dia. Inside/Outside Rose - Tulip Knobs: Tulip & Orbit Size: 2 1/2" dia. A-Series Latches Anti-Friction Fire Door Deadlatch, 14-042 T Strike 10-013 Square corner, T-strike, deep box, fire door latch 10-016 Backset Extension Link 43-005 ALX-Series Springlatch 13-248 AL-Series Deadlatch 13-247 Strikes ANSI Strike 10-025 D-5 ND-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 103 D Knobs • Complete Locks Design and Finishes ORB PLY TUL*** CYLINDRICAL Function Description 626 605 6606 609 612 625 643e 613 6629 630* Keyless D10S Passage D25D Exit, blank plate x lever D40S Privacy D44S Privacy, hospital D170 Single dummy 628 640 658 785 797 815 276 282 292 A-Series Keyed, Single Cylinder D53PD Entrance D70PD Classroom D73PD Corridor D80PD Storeroom D80PD EL/EU Electrically locked or unlocked 1,432 1,444 1,462 D85PD Faculty Restroom Lock 994 1,006 1,024 914 926 944 Primary Cylinder Adjustments Available Levers Available Finishes LD CD ALL D60PD Vestibule D66PD Store D72PD Classroom Security D82PD Institution 999 1011 1,029 ORB LD RD TD** JD -65 39 -36 -98 -130 NOT AVAILABLE RD TD** JD 78 -72 EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS AL-Series Secondary Cylinder Adjustment * ** EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) 18.00 SL Cylinder with Everest B or Everest R keyways 18.00 PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW) SINGLE KIL EXAMPLE: 1 EA. D53LD & 1 EA. 20-748(-XP) +145 DOUBLE KIL EXAMPLE: 1 EA. D72CD & 2 EA. 20-748(-XP) +290 SINGLE FSIC EXAMPLE: 1 EA. D53JD & 1 EA. 20-740(-XP) +157 DOUBLE FSIC EXAMPLE: 1 EA. D72JD & 2 EA. 20-740(-XP) +314 Finish only available in PLY knob. Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. TUL knobs not available stainless steel finishes (629 and 630). ND-Series D-6 ALX-Series *** Price Book 8 104 Effective April 4, 2020 • Rev. 04/20 JD 605 6606 609 612 613 625 626 6629 630* 643e CD Keyed, Double Cylinder RD TD Latches, Strikes, Locks Less Components, Non-Standard Door Thickness, Tamper Resistant Torx® Screws, Special Functions Options • D Knobs Latches 14-042 14-028 43-005 Backset - Description Lock Adjustment N/C +12.30 2 3/4" - Square corner, 1 1/8" x 2 1/4" 3 3/4" - Square corner, 1 1/8" x 2 1/4" CYLINDRICAL Part Number Spring Latch 13-248 14-010 Deadlatch 14-047 14-048 13-247 N/C N/C N/C 2 3/8" - Square corner, 1 1/8" x 2 1/4" 2 3/8" - Square corner, 1 x 2 1/4" 2 3/4" - Square corner, 1 1/8" x 2 1/4" 2 3/4"" - Anti-friction fire door latch Square corner, 1 1/8" x 2 1/4", 3/4" throw, modified latch prep for anti-friction tongue pivot 3 3/4" - Square corner, 1 1/8" x 2 1/4" 5" - Backset extension link - require reinforcement when used in hollow metal door applications, must be used with 2 3/4" backset latches and only 13-247, 13-248 & 14-042 latches +208.00 +12.30 +38.10 Strikes Part Number 10-013* 10-016 K510-066 Lock Adjustment N/C 5.30 N/C N/C A-Series 10-025* Lip Length - Description 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8" - Square corner, T-strike, deep box, fire door latch 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" Box for ANSI strike, must be specified +32.20 N/C * Handing is required when these strikes are ordered for non-standard door thickness with adjusted lip lengths Locks Less Components Description Less all possible components Example: D53LD LLL 626 LLL LLL, lever chassis Less each rose Less springlatch Less deadlatch -26.20 -18.20 -31.40 -42.00 -6.20 Sum of deducts ALX-Series Lock chassis only Less each knob Lock Adjustment AL-Series Less strike Specify LLL for lever design Example: D53PD LLL/RHO x ATH LLL for rose design Example: D53PD RHO x RHO/LLL LLL for latch Example: D40S RHO 605 LLL 10-025 LLL for latch Example: D53PD SPA 626 LLL 10-025 LLL for strike Example: D53PD ATH 612 13-047 LLL Non-Standard Door Thickness Description Extended Equally (EE), over 2" - 2 1/2" Extended Inside (EI), over 2" - 4" Extended Outside (EO), over 2" - 4" Extended Differently (ED), over 2" - 2-1/2" Extended Equally (EE), over 2-1/2" - 6" Extended Differently (ED), over 2-1/2" - 6" Specify Lock Adjustment $86.50 405.00 Door thickness and how door is extended. Example: 3" EE 645.00 D-7 Tamper Resistant Torx® Screws Specify/ Part Number Torx Screws Description Lock Adjustment +21.90 Screws - Latch and Strike Special Functions - Extended Lead Times “X” Number Function - Description Base Lock ND-Series Part Number Lock Function Lock Adjustment (Base Lock) D25x80 XC03-543 D25x80 - Blank plate outside, fixed knob inside. Key in knob retracts latch. D80 +610.00 D60 XC03-928 D60 - Closed outside knob. D70 +392.00 D70x80 XC07-960 D70x80 - Key locks or unlocks outside knob. Key in fixed inside knob retracts latch. D82 +540.00 D25x70 XC11-577 D25x70 - Blank plate outside. Key locks or unlocks inside knob. D70 +610.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 105 Knobs and Related Components, Roses, Latches and Related Components D Knobs • Parts Knobs and Related Components Available Finishes - Specify for Listed Parts 605 606 609 • • 04-006 PLY, 04-007 PLY 04-006 ORB TUL, 04-007 ORB TUL, 04-030, 04-031, 04-034 CYLINDRICAL Part Number • • 613 • • • • Description 625 626 629 630 643e • • Closed Lever - ORB PLY TUL 04-007* Open Lever - ORB PLY TUL 04-030* Full size core knob, driver, retainer (converts PD to JD) - ORB 04-031 6 • 6 • • Full size core knob - ORB $115.00 96.90 81.70 178.00 04-034* Full size core knob, core, driver, and retainer (converts PD to RD) - ORB C503-403 Cylinder Sleeve - PLY C503-940 Cylinder Sleeve - ORB C603-262 Cylinder Sleeve - TUL 04-033 Full size core driver and retainer 13.50 C603-569 Full size core retainer 4.50 C604-333 Full size core driver, universal 9.10 * • • Price Each 04-006* * 6 6 612 12.30 Specify part number, knob style, finish. Ex: 04-007 ORB 626 (open lever, Orbit design, 626 finish) A-Series Roses Available Finishes - Specify for Listed Parts 605 606 609 • • 04-001 PLY, 04-002 PLY, C503-775 04-001 TUL, 04-002 TUL AL-Series Part Number 6 • • 612 613 • • • • Description 04-001** Outside Rose - PLY TUL 04-002** Inside Rose - PLY TUL C503-775 Blank Rose, D25 ** 6 625 626 629 630 643e • • • • 6 • 6 • • Price Each $107.00 49.10 Specify part number & finish. Ex: 04-002 PLY 626 (Plymouth design, 626 finish) Latches and Related Components Available Finishes - Specify for Listed Parts 605 606 609 • 13-248, 14-010, 14-047, 14-048, 13-247, 14-042, 14-028, 43-005 6 • 612 613 • • 625 626 629 630 643e • 39-030 ALX-Series Part Number Backset - Description Price Each Spring Latch 13-248 2 3/4" - Square corner, 1 1/8" x 2 1/4" $92.80 14-010 3 3/4" - Square corner, 1 1/8" x 2 1/4" 111.00 14-047 2 3/8" - Square corner, 1 1/8" x 2 1/4" 121.00 14-048 2 3/8" - Square corner, 1" x 2 1/4" 121.00 13-247 2 3/4" - Square corner, 1 1/8" x 2 1/4" 92.80 14-042 2 3/4" - Anti-friction Fire Door Latch 1" Square corner, 1 1/8" x 2 1/4", 3/4" throw, modified latch prep for anti-friction tongue pivot 369.00 14-028 3 3/4" - Square corner, 1 1/8" x 2 1/4" 111.00 43-005 5" - Backset extension link - require reinforcement when used in hollow metal door applications; backset link must be used with 2 3/4" backset latches 34.10 39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations. 59.80 ND-Series D-8 Dead Latch Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 106 Effective April 4, 2020 • Rev. 04/20 • 6 • • • Parts • D Knobs Strikes, Plunger Parts, Reinforcements, Finished Miscellaneous Parts Strikes Available Finishes - Specify for Listed Parts 605 606 609 • 10-013, 10-016, 10-025 Part Number 6 • 612 613 • • Lip Length - Description 625 626 629 630 643e • • 6 • • Price Each 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" $15.70 10-013-112 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 15.70 10-016 1 1/8"" - Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8" Use with fire door latch 15.70 10-025-1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 15.70 10-025-138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 10-025-112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" K510-066 Box for ANSI strike CYLINDRICAL 10-013-118 45.00 7.00 Plunger Parts Available Finishes - Specify for Listed Parts 605 606 609 • 04-020, 04-021, 04-022, 04-023, 04-025, 04-026, Part Number 04-020 * 04-022* 04-023* 04-025* * 612 613 • • Dimension - Door Range - Description 625 626 629 630 643e • • 6 • • Price Each 443 - 1 3/8" – 2" - Plunger, ins - D40, D44 $86.30 468 - over 2" – 2 1/2", EE - Plunger, ins - D40, D44 170 - 1 3/8" – 2" - Plunger unit, out - D40 68.00 195 - over 2" – 2 1/2", EE - Plunger unit, out - D40 170 - 1 3/8" – 2" - Plunger unit, out - D44 84.60 195 - over 2" – 2 1/2", EE - Plunger unit, out - D44 443 - 1 3/8" – 2" - Plunger unit, ins - D53 468 - over 2" – 2 1/2", EE - Plunger unit, ins - D53 67.90 443 - 1 3/8" – 2" - Plunger unit, ins - D73 468 - over 2" – 2 1/2", EE - Plunger unit, ins - D73 443 - 1 3/8" – 2" - Plunger unit, ins - D85 AL-Series 04-026* • A-Series 04-021* 6 156.00 468 - over 2" – 2 1/2", EE - Plunger unit, ins - D85 Specify part number, dimension, design & finish. Ex: 04-022 170 626 Reinforcements Part Number Price Each 37-001 $40.50 A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold latch in metal doors 12.70 A501-878** Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation 0.78 G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 7.10 ** ALX-Series Description Metal door reinforcer kit, fits both 7/8" and 1" diameter housings Specify door thickness, includes A501-567 and A501-565 or A501-566 20.40 Order in multiples of 100 D-9 Finished Miscellaneous Parts Available Finishes - Specify for Listed Parts 605 606 609 • C102-522, C102-524, C102-541, C102-542, C102-570, C102-572 Part Number 6 Description • 612 613 • • 625 626 629 630 643e • • 6 • • Price Each $97.00 Hub and cap, out (except D80, D80 EL/EU, D82, D85) C102-524 Hub and cap, ins (except D82) 72.80 C102-541 Hub and cap, ins - D170 53.30 C102-542 Hub and cap, out - D80 EL/EU 97.00 C102-570 Hub and cap, out - D80, D82, D85 C102-572 Hub and cap, ins - D82 ND-Series C102-522 155.00 Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 107 D Knobs • Parts Special Parts, Miscellaneous Parts Special Parts - Extended Lead Times Available Finishes 605 606 609 • XQ02-309, XQ03-494, XQ07-351, 38-018 CYLINDRICAL Part Number XQ02-309 XQ03-494* XQ07-351* XC03-069 38-018 * Description 10-013 Strike, 7/8" flat lip 10-013 Strike, 1 5/8" – 6" lip 10-013 Strike, 6 1/8" – 12" lip 10-025 Strike, 7/8" flat lip 10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 3/8" and 1 1/2") Backset Link, range: 5" - 42", specify backset (not adjustable); NOTE: This extension link must be used with a 2-3/4" backset latch. Thin door extension ring (2 required per lock) 6 • 612 613 • • 625 626 629 630 643e • • 6 • • Price Each 43.90 175.00 222.00 44.00 212.00 783.00 13.60 Specify lip length Miscellaneous Parts ND-Series D-10 ALX-Series AL-Series A-Series Part Number A501-167 C100-059 C100-062 C102-540 C102-837 C102-840 C203-034 C203-376 C203-390 C203-391 C203-411 C203-733 C203-858 C203-947 C203-948 C303-006 C303-400 C303-439 C503-008** C503-019 C503-308 C503-314 C503-324 C503-334 C503-335 C503-339 C503-359 C503-360 C503-361 C503-362 C503-368 C503-371 C503-400 C503-768 C503-965 C603-500 C604-187 C604-188 C604-191 C604-204 C604-205 C604-273 C604-312 ** Description Threaded rod for mounting D170s as double dummy set Spindle unit, out and ins - D66 Spindle unit, out - D70, out and ins - D72 Hub and frame - D25 Locking plug, out - D73 Key spindle - D40, D44, D53, D60 Spindle and catch, ins (except D60, D66, D72, D80EL/EU, D82) Plug - D85 Spindle and key cam, out - D70, D72 Spindle and key cam - D60 Key spindle and spring - D85 Locking plug - D70, D72 Spindle and hammer, ins - D85 Spindle and catch, out - D40, D44 Spindle and catch, out - D53, D60, D73, D80 Slide and roller Spindle and catch, ins - D80EL/EU AC Rectifier Cotter pin Slide spring Anchor spring (except D25, D170) Slide spring seat Spindle washer - D60, D70, D72, D85 Plunger hammer - D85 Plunger hammer spring - D85 Key spindle - D80, D82, D85 Key cam - D60 Key cam rider - D60 Key cam pin - D60 Plunger - D60 Key cam sleeve, out - D70, D72 Plunger - D66 Key cam pin - D70, D72 Spacer - D80 EL/EU Plunger sleeve, out - D40, D44 Housing Slide catch, restoring - D40, D44, D73, D85 Slide catch, non-restoring - D53 Slide catch spring - D40, D44, D53, D73, D85 Spindle, keyed - D80 EL/EU Solenoid retaining clip - D80 EL/EU Rose pin - D25 Anchor (except D25) Order in multiples of 100 Price Book 8 108 Effective April 4, 2020 • Rev. 04/20 Lock Adjustment $16.40 165.00 55.00 78.40 67.90 54.00 17.10 67.90 55.60 67.90 55.60 64.40 60.80 71.50 0.70 6.90 7.70 7.50 7.40 15.80 7.30 29.30 16.00 16.50 7.30 7.50 7.30 7.30 7.30 3.60 16.30 15.80 7.60 29.30 9.30 1.50 7.50 Parts • D Knobs Screws, Screw Packs, Torx Screw Packs, Cylinder Reference Table Screws * 605 606 609 6 • • 612 • Size — 1/4" 20 x 2 1/2" 12-24 x 1" #8 x 3/4" 613 • 625 626 629 630 643e 6 • • • • Price Each $1.20 1.20 1.00 0.92 CYLINDRICAL Available Finishes - Specify for Listed Parts A501-171, A501-746, C603-256, C603-897 Part Door Number Description Thickness Type A501-171* D170, washer — Washer A501-746* D170, mounting screw 1 1/2" – 2" POH Machine C603-256* ANSI strike — PFH Combo C603-897* Latch and strike — PFH Combo Order in multiples of 100 Screw Packs Available Finishes - Specify for Listed Parts 605 606 609 • B202-517, C303-007, C203-736, C303-028 Part Number • 613 • • 625 626 629 630 643e • Price Each (4) C603-897 $8.50 C303-007 Mounting, D170 (1) A501-171 (1) A501-746 (3) C603-897 10.00 C203-736 ANSI strike (2) C603-256 6.80 Mounting, all except D170 (4) C603-897 (2) C603-256 12.60 C303-028 • 6 • • A-Series Contents Latch and strike B202-517 Description 6 612 Torx Screw Packs Available Finishes - Specify for Listed Parts 605 606 609 • C203-311, C203-312 Description 612 613 • • Contents C203-311** Latch and strike (4) C503-766 (T-15) C203-312** Latch and ANSI strike (2) C503-766 (T-15) (2) L583-371 (T-20) ** • 625 626 629 630 643e • • 6 • • Price Each AL-Series Part Number 6 $21.90 Torx screw packs are furnished with appropriate T-xx installation tool(s) Cylinder Reference Table 91-016 20-748 20-748-XP 91-714-XP 91-004 20-724 20-724-XP 91-704-XP Price Each - Restricted $83.00 83.00 145.00 145.00 179.00 65.00 83.00 83.00 145.00 145.00 179.00 96.00 96.00 ND-Series 20-524 20-524-XP 91-504-XP 23-003 23-003-098 NOTE: Price Each $65.00 D-11 20-548 20-548-XP 21-002 Cylinder Mechanism Function Design Door Thickness Standard Everest SL (R/B Keyways only) Primus Primus XP Standard Everest SL Primus XP (R/B Keyways only) Primus UL437 Primus UL437 XP Standard Standard Functions Everest SL (R/B All Keyways only) Primus Primus XP 2" - 2 1/2" Everest SL Primus XP (R/B Keyways only) Primus UL437 Primus UL437 XP Everest SL UL437-XP Standard Standard D85 Standard 2" - 2 1/2" When ordering sold separate parts specify part number and the finish. ALX-Series Part Number 23-001 114.00 114.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 109 D Knobs ND-Series D-12 ALX-Series AL-Series A-Series CYLINDRICAL Notes Price Book 8 110 Effective April 4, 2020 • Rev. 04/20 ND GRADE 1 CYLINDRICAL LEVERED LOCK CYLINDRICAL Outside Lever Outside Spring Cage 6-pin Cylinder Lock Chassis Outside Rose A-Series Chassis/Spring Cage Attachment Screws Plunger Assembly Anti Rotation Plate Inside Spring Cage AL-Series Reversible Deadlatch 1/2” Throw ANSI Strike Mounting Screws Inside Rose ALX-Series Inside Lever Button D-Series ND-1 Price Book 8 Effective April 4, 2020 • Rev. 04/20 111 ND To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 10 Inside Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details ND53PD RHO 622 OME - - 13-247 10-025 214 EE 138 KA Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Line item number Quantity Product function + Cylinder code Outside lever design Outside finish Inside lever design: Specify only if different from the outside lever design Inside lever finish: Specify only if different from the outside finish Hand of door: N/A for ND lock, Exception: Handing specification required for HSLR Trim Product latch: Leave blank for standard latch or specify part number if non-standard latch is required. Product strike: Leave blank for standard strike or specify part number if non-standard strike is required. Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4" Extension: Enter for doors 2 1/8" or greater. Example: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended differently Dim: Dimension: Enter only for non-standard strike lip length Additional Details: Enter additional detail for keying information or special requirements AL-Series A-Series CYLINDRICAL Ordering Procedures ND-2 D-Series ALX-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified, 1-3/4" only for HSLR Trim. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 112 Effective April 4, 2020 • Rev. 04/20 Introduction ND Levers Table of Contents ND 53 P D Latch Suffix D = Deadlatch S = Springlatch Cylinder Suffix P6 = 6-Pin Cylinder L = Less 6-Pin Cylinder R = FSIC J = Less FSIC M = SL - FSIC T = FSIC Construction Core B = Less SFIC BDC = Disposable Construction SFIC G6/7 = SFIC (6 or 7 pin) H = Refundable Construction SFIC SL Conventional Cylinder, Z = 7 pin Function Lock Series SFIC = Small Format (Best® Style) Interchangeable Core AL-Series * Used for double cylinder functions. Finish Codes and Descriptions Description Bright Brass Satin Brass Satin Bronze Oil Rubbed Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chrome Antimicrobial Coating on Satin Chromium Stainless Steel Aged Bronze ALX-Series Code 605 (US 3) 606 (US 4) 612 (US 10) 613 (US 10B) 619 (US 15) 622 (US 19) 625 (US 26) 626 (US 26D) 626AM 630** (US32D) 643e (US 11) D-Series **For HSLR Trim only Standard Features ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door. 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw 1 1/4" x 4 7/8", ANSI Square corner, no box 2 3/4" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 5/8" – 2 1/8" for all functions except ND85; 1 3/4" – 2" for ND85 Two nickel silver cut keys per lock, 6-pin, S123 section ND-3 Certification Latch Strike Backset Cylinder Door Range Keys A-Series BAA/ARRA Contact your local RSO or Sales Rep. for ordering details Product Identification CYLINDRICAL Functions ND-4 Complete Locks ND-7 ND-9 Options Latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-9 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-9 Locks Less Components. . . . . . . . . . . . . . . . . . . . . . ND-9 Non-Standard Door Thickness . . . . . . . . . . . . . . . ND-9 Indicator Rose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-10 Miscellaneous Lock Options. . . . . . . . . . . . . . . . . . ND-10 Tactile Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-10 School Upgrade Kits. . . . . . . . . . . . . . . . . . . . . . . . . ND-11 Parts ND-14 Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-14 Spring Cages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-15 Conversion Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-15 Roses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-15 Buttons / Plunger Assemblies. . . . . . . . . . . . . . . . ND-15 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-16 Cylinder Reference Table. . . . . . . . . . . . . . . . . . . . . ND-16 Tail Pieces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-16 Chassis Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-17 Key Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-18 Slide / Related Components . . . . . . . . . . . . . . . . ND-18 Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-18 Hollow Metal Door Reinforcements . . . . . . . . . . ND-19 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-19 Screw Packs, Standard. . . . . . . . . . . . . . . . . . . . . . ND-19 Torx Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-19 Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ND-20 Screws Packs, Torx. . . . . . . . . . . . . . . . . . . . . . . . . . ND-20 Allegion Connect Harnesses. . . . . . . . . . . . . . . . . ND-20 Complete Cylinders See Cylinders Section How To Order Forms & Example Price Book 8 Effective April 4, 2020 • Rev. 04/20 113 ND Levers • Functions CYLINDRICAL ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door. Non-Keyed Locks Keyed Locks SCHLAGE ANSI SCHLAGE ND10S F75 Passage Latch Both levers always unlocked. Inside lever is always free for immediate egress. Also available with Request to Exit (RX) function. ND50PD F82 Entrance/Office Lock Push-button locking. Push-button locks outside lever until unlocked with key or by turning inside lever. Inside lever is always free for immediate egress. ND12D F89 Exit Lock Outside lever always fixed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function. ND53PD F109 Entrance Lock Turn/push-button locking; pushing and turning button locks outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing button locks outside lever until unlocked by key or by turning inside lever. Inside lever is always free for immediate egress. ND60PD F88 Vestibule Lock Latch retracted by key from outside when outside lever is locked by key in inside lever. Inside lever always unlocked for immediate egress. ND66PD F91 Store Lock Key in either lever locks or unlocks both levers. ND70PD F84 Classroom Lock Outside lever locked and unlocked by key. Inside lever always unlocked for immediate egress. ND73PD F90 Corridor Lock Locked or unlocked by key from outside. Push-button locking from inside. Turning inside lever or closing door releases button. When outside lever is locked by key it can only be unlocked by key. Inside lever always unlocked for immediate egress. ND75PD F110 Classroom Security Lock Key in either lever locks or unlocks outside lever. Inside lever always unlocked for immediate egress. Electrically Locked (Fail Safe) Outside lever continuously locked electrically. Unlocked by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always always unlocked for immediate egress. Also available with Request to Exit (RX) function. A-Series ND12DEL Electrically Unlocked (Fail Secure) Outside lever continuously locked until unlocked by electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function. ND25D F89 Exit Lock Blank plate outside. Inside lever always unlocked for immediate egress. ND40S F76 Bath/Bedroom Privacy Lock Push-button locking. Can be opened from outside with small screwdriver. Turning inside lever or closing door releases button. Inside lever is always free for immediate egress. ND44S Hospital Privacy Lock Push-button locking. Unlocked from outside by turning emergency turn-button. Turning inside lever or closing door releases button. Inside lever is always free for immediate egress. ND170 Single Dummy Trim Dummy trim for one side of door. Used for door pull or as matching inactive trim. ND-4 D-Series ALX-Series AL-Series ND12DEU Safe School Locks Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Price Book 8 114 ANSI Effective April 4, 2020 • Rev. 04/20 Functions • ND Levers ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door. Keyed Locks SCHLAGE ANSI ANSI ND80PD F86 ND80PDEL Electrically Unlocked (Fail Secure) Outside lever continuously locked until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function. Entrance/Office Lock Push-button locking. Push-button disengages outside lever until unlocked with key or by turning inside lever. ND92PD F109 Entrance Lock Turn/push-button locking; pushing and turning button disengages outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing button disengages outside lever until unlocked by key or by turning inside lever. ND93PD F88 Vestibule Lock Latch retracted by key from outside when outside lever is disengaged by key in inside lever. Inside lever is always unlocked for immediate egress. ND94PD F84 Classroom Lock Outside lever disengaged and unlocked by key. Inside lever always unlocked for immediate egress. ND95PD F110 Classroom Security Lock Key in either lever disengages or unlocks outside lever. Inside lever always unlocked for immediate egress. ND96PD F86 Storeroom Lock Outside lever always disengaged. Entrance by key only. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX). ND96PDEL Electrically Locked (Fail Safe) Outside lever continuously disengaged electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress. Also available with Request to Exit (RX). ND96PDEU Electrically Unlocked (Fail Secure) Outside lever continuously disengaged until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress. Also available with Request to Exit (RX). ND97PD F90 Corridor Lock Locked or unlocked by key from outside. Push-button locking from inside. Turning inside lever or closing door releases button. When outside lever is locked by key it can only be unlocked by key. Inside lever is always unlocked for immediate egress. Institution Lock Both levers fixed. Entrance by key in either lever. Safe School Locks Price Book 8 Effective April 4, 2020 • Rev. 04/20 115 ND-5 Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. D-Series Faculty Restroom Lock Outside lever fixed. Entrance by key only. Push-button in inside lever activates visual “occupancy” indicator, allowing only emergency master key to operate. Turning inside lever or closing door releases visual occupancy indicator. Rotation of inside spinner-button by spanner key provides lock-out feature by keeping indicator thrown. Inside lever is always free for immediate egress. ALX-Series ND85PD F93 Electrically Locked (Fail Safe) Outside lever continuously locked electrically. Unlocked by key outside or by switch or power failure. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function. ND91PD F82 AL-Series ND82PD F87 Storeroom Lock Outside lever fixed. Entrance by key only. Inside lever always unlocked for immediate egress. Also available with Request to Exit (RX) function. A-Series ND80PDEU Designed to disengage outside spindle from latch when in locked condition. Inside lever is always free for immediate egress. CYLINDRICAL SCHLAGE Vandlgard Functions: ND Levers • Functions Specialty Functions ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door. Pricing for all Speciality functions can be found on ND-10 CYLINDRICAL Non-Keyed Locks SCHLAGE ANSI ND30D F77 SCHLAGE Patio Lock Push button locking. Turning inside lever or closing door releases button, preventing a lock-out. Inside lever always unlocked for immediate egress. Specify per XN12-007. ANSI Time Out Lock Caretaker Side Pushing and holding button will lock inside lever (detention side) until released. Lever always retracts latch. Detention SideLever retracts latch unless outside button is depressed. Vandlgard allows inside spindle to disengage from latch when locked. ND45 ANSI SCHLAGE ANSI Storeroom Exit Lock Blank plate outside. Key in fixed inside lever retracts latch. Specify per XN12-005. ND70 x 80PD Classroom by Storeroom Lock Key locks and unlocks outside lever. Key in fixed inside lever retracts latch. Specify per XN12-006. ND25 x 70PD Classroom Exit Lock Blank plate outside. Key locks or unlocks inside lever. Specify per XN12-004. ND72PD F80 Communicating Lock Key in either lever locks and unlocks own lever. Specify per XN12-002. ND60PD Vestibule with Closed Outside Lever Same as ND60 except outside lever is closed. Inside lever always unlocked for immediate egress. Specify per XN12-001. Keyed Locks SCHLAGE ANSI Vandlgard Functions: Designed to disengage outside spindle from latch when in locked condition. Inside lever is always free for immediate egress. ND72PD Vandlgard Communicating Lock Communicating, ND72, lock with Vandlgard. Key in either lever locks and unlocks own lever. Both inside and outside levers are clutching.Specify per XN12-003. ND-6 D-Series ND25 x 80PD AL-Series SCHLAGE ALX-Series A-Series Keyed Locks Price Book 8 116 Effective April 4, 2020 • Rev. 04/20 Complete Locks • ND Levers Omega (OME) Sparta (SPA) Rhodes (RHO) Tubular (TLR) Latitude (LAT) Longitude (LON) Broadway (BRW) Boardwalk (BRK) High Security Ligature Resistant (HSLR) CYLINDRICAL Athens (ATH) Commercial Lever Suite L Lock Levers 07 Omega 17 06 03 Latitude Longitude 98/99 Exit 07 16 17 06 03 Latitude Longitude AL Lock Jupiter Omega Neptune Saturn S Lock Jupiter F Lock Neptune Saturn Jazz Elan A-Series Latitude AL-Series ND Levers Athens Omega Sparta Rhodes Tubular Latitude Longitude Broadway Boardwalk Roses Omega Inside/Outside Rose, 03-042 OME Levers: OME Size: 3 7/16" dia. Blank Outside Rose, N523-002 Outside Plate for: ND25, ND25X70 & ND25X80 Size: 3 1/2" dia. Indicator Rose (Rhodes) XN12-035 Functions: ND75, ND95, ND60 & ND93 Levers: ATH, SPA, RHO, TLR, LAT, LON, BRW, BWK Size: 3 7/16" dia. Finish: 626 only Indicator Rose (Omega) XN12-045 Functions: ND75, ND95, ND60 & ND93 Levers: OME Size: 3 7/16" dia. Finish: 626 only ALX-Series Inside/Outside Rose, 03-042 RHO Levers: ATH, SPA, RHO, TLR, LAT, LON, BRW, BWK Size: 3 7/16" dia. Deadlatch, 13-247 Springlatch, 13-248 Anti-Friction Fire Door Deadlatch, 14-042 T Strike, 10-013 Square corner, T-strike, deep box, fire door latch, 10-016 D-Series Latches Backset Extension Link, 43-005 ANSI Strike, 10-025 ND-7 Strikes Price Book 8 Effective April 4, 2020 • Rev. 04/20 117 ND Levers • Complete Locks Designs and Finishes D-Series ALX-Series AL-Series A-Series CYLINDRICAL ATH OME RHO SPA ** TLR LAT LON BRW BRK HSLR Function 626 605 606 612 613 619 6626AM 622 625 643e 630 450 462 480 1,878 Decription PRIMARY CYLINDER ADJUSTMENTS AVAILABLE LEVERS AVAILABLE FINISHES Keyless ND10S Passage ND12D Exit, lever x lever ND12D EL/EU Electrically locked or unlocked 700 712 730 2,128 ND25D Exit, blank plate x lever 450 462 480 1,878 ND40S Privacy ND44S Privacy, hospital 518 530 548 1,946 ND170 Single dummy 139 145 155 NA ND172 Double Dummy 201 213 231 NA Keyed, Single Cylinder ND50PD Entrance/Office ND53PD Entrance ND70PD Classroom ND73PD Corridor ND80PD Storeroom ND85PD Faculty Restroom Lock ND91PD Vandlgard® Entrance/Office ND92PD Vandlgard® Entrance ND94PD Vandlgard® Classroom ND96PD Vandlgard® Storeroom ND97PD Vandlgard® Corridor Vandlgard® Classroom Security 87 45 671 683 701 2,099 Keyed, Double Cylinder ND95PD N/C -96 2,330 Vandlgard Vestibule Classroom Security -36 N/A 932 ND93PD 39 774 914 Institution HD 756 902 ND82PD GD 744 2,249 Classroom Security BD BDC -65 851 Store JD 2,041 833 ND75PD RD TD MD 643 821 Vestibule LD CD 625 ND96PD EL/EU Vandlgard® Electrically locked or unlocked ND66PD ATH OME SPA RHO TLR HSLR 613 ND80PD EL/EU Electrically locked or unlocked ND60PD 6605 6606 6612 6613 6619 6622 6625 626 6643e 6626AM 730 742 760 ATH SPA RHO TLR LD-SAR LD-CO6 798 NOT AVAILABLE -65 39 -36 N/C 87 45 LD CD RD TD MD JD BD BDC GD HD -130 78 -72 N/C 174 90 N/C LD-SAR LD-CO6 2,214 EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE +18 SL Cylinder with Everest B or Everest R keyways +18 Secondary PRIMUS/PRIMUS XP ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW) Cylinder Adjustments SINGLE KIL EXAMPLE: 1 EA. ND53LD & 1 EA. 20-765(-XP) +145 +290 ND-8 DOUBLE KIL EXAMPLE: 1 EA. ND75CD & 2 EA. 20-765(-XP) * ** SINGLE FSIC EXAMPLE: 1 EA. ND53JD & 1 EA. 20-740(-XP) +157 DOUBLE FSIC EXAMPLE: 1 EA. ND75JD & 2 EA. 20-740(-XP) +314 Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. High security ligature resistant; please consult customer service for available functions. Not all are available at launch. Price Book 8 118 JD-SAR JD-CO6 JD-YA6 JD-MED 2,158 816 JD-CO7 JD-YA7 N/C ® 786 JD-SAR JD-CO6 JD-YA6 JD-MED RHO Effective April 4, 2020 • Rev. 04/20 N/C JD-CO7 JD-YA7 Latches, Strikes, Lock Less Components, Non-Standard Door Thickness Options • ND Levers Latches Part Number Backset - Description Lock Adjustment Spring Latch* 2 3/4" - Square corner, 1 1/8" x 2 1/4" N/C 14-010 3 3/4" - Square corner, 1 1/8" x 2 1/4" +11.00 14-047 2 3/8" - Square corner, 1 1/8" x 2 1/4" N/C 14-048 2 3/8" - Square corner, 1 x 2 1/4" N/C 13-247** 2 3/4" - Square corner, 1 1/8" x 2 1/4" 14-042 2 3/4" - Anti-friction fire door latch 3/4" throw, modified latch prep for anti-friction tongue pivot 14-028 3 3/4" - Square corner, 1 1/8" x 2 1/4" +10.00 43-005 5" - Backset extension link2 - use with 2 3/4" backset latches : 13-248, 13-247, & 14-042 +34.10 CYLINDRICAL 13-248** Deadlatch* * ** N/C +186.00 All latch extensions require reinforcement when used in hollow metal door applications No substitutes for HSLR Trim Strikes Part Number Lip Length - Description Lock Adjustment N/C 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" N/C 10-016 1 1/8" - Square corner, T-strike, deep box, fire door latch N/C 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8"** N/C 10-025 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 10-013 +28.90 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" K510-066 A-Series 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" N/C Box for ANSI strike, must be specified AL-Series Locks Less Components* Specify Less each lever LLL for lever design Example: ND53PD LLL/RHO x ATH -23.70 Less each rose LLL for rose design Example: ND53PD RHO x RHO/LLL -13.80 Less springlatch LLL for latch Example: ND40S RHO 605 LLL 10-025 -25.60 Less deadlatch LLL for latch Example: ND53PD SPA 626 LLL 10-025 -33.70 Less strike LLL for strike Example: ND53PD ATH 612 13-047 LLL -4.60 Lock chassis and spring cages only Less all possible components Example: ND53LD LLL 626 LLL LLL, lever chassis * Lock Adjustment ALX-Series Description Sum of deducts Option not available for HSLR Trim Description Specify Lock Adjustment 1 3/8" thick doors - 2 chassis spacers (XN12-012) required; see ND-18 Extended Inside (EI)**, over 2" – 6" Extended Outside (EO)**, over 2" – 6" Door thickness and how door is extended. Example: 3", EO +314.00 +517.00 Extended Differently (ED)**, over 2" – 6" If not specified orders will default to EE ND-9 * Lock Adjustment +61.10 Extended Equally (EE)**, over 2 1/8" – 6" ** D-Series Non-Standard Door Thickness* For ND85, EE range is from over 2" to 6". EI, EO, and ED ranges are from over 1 7/8" to 6" Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 119 ND Levers • Options Indicator Rose (“LOCK” printed on inside rose) Part Number Description Lock Adjustment AL-Series A-Series CYLINDRICAL XN12-035* XN12-045* Indicator Rose - Rhodes Indicator Rose - Omega * Intended for the inside rose on double cylinder applications Available in 626 only - other finishes receive a standard rose. 75 & 95 - Standard Option - Lock adjustment does not apply; standard rose is available 60 & 93 - Optional - Lock adjustment does apply Option not available for HSLR Trim +34.90 Miscellaneous Lock Options Specify/ Part Number Description 8AT 8RO 8SP 8TR 8BK 8BY 8LT 8LN XN13-052*** XN13-054*** XN13-053*** XN13-145*** Torx Screws RX Tactile Lever - Athens Tactile Lever - Rhodes Tactile Lever - Sparta Tactile Lever - Tubular Tactile Lever - Boardwalk Tactile Lever - Broadway Tactile Lever - Latitude Tactile Lever - Longitude Break-Away Lever - Rhodes KIL (P,L,C,Z) Break-Away Lever - Rhodes FSIC (R,J,T) Break-Away Lever - Rhodes SFIC (B,BDC,G,H) Break-Away Lever - Rhodes Closed Screws - Latch and Strike Request to Exit Feature (Available on ND10, ND12, ND12EL/EU, ND80, ND80EL/EU, ND96, & ND96EL/EU functions) Ready to be used in a Normally Open or Normally Closed application. Lead Lining Lock Adjustment +47.00** 340.00 +21.90 +72.20 +655.00 XN12-307 ** Per lever *** Break-Away levers have extended lead times The following secure functions are available with breakaway options for the exterior lever (When ordered, the correct lever must be identified for the functions – Closed, KIL, FSIC, SFIC): ND12, ND12EL/EU, ND30, ND50, ND53, ND60 (for both keyed and closed levers), ND66, ND70, ND72, ND73, ND75, ND80, ND80EL/EU, ND82, ND91, ND92, ND93, ND94, ND95, ND96, ND96EL/EU, ND97 ALX-Series Interior breakaway levers must be ordered via the following process – Lock(s) are ordered Less Lever for the interior lever and breakaway lever(s) are ordered separately. Applicable functions include: ND66, ND70X80, ND72, ND82 Option not available for HSLR Trim Tactile Options ND-10 D-Series Typical pattern for 8AT, 8LT, 8LN, 8RO, 8SP Typical pattern for 8BK, 8BY, 8TR Special Functions - Extended Lead Times Part Number Lock Function “X” Number ND25x80 XN12-005 ND70x80 XN12-006 ND25x70 XN12-004 ND60 XN12-001 ND72 XN12-002 ND30D XN12-007 ND72 XN12-003 ND45 XN12-317 Function - Description ND25x80 - Blank plate outside, fixed lever inside. Key in lever retracts latch. ND70x80 - Key locks or unlocks outside lever. Key in fixed inside lever retracts latch. ND25x70 - Blank plate outside. Key locks or unlocks inside lever. ND60 - Closed outside lever. ND72 - Double cylinder communicating lock. ND30D - Patio lock. Base Lock ND80 ND82 ND70 ND70 ND70 ND40S ND72 - Vandlgard® levers on inside and outside. ND45 - Time out lock. ND94 ND91LD Price Book 8 120 Effective April 4, 2020 • Rev. 04/20 Lock Adjustment (Base Lock) $439.00 404.00 439.00 510.00 510.00 469.00 535.00 353.00 Options • ND Levers School Upgrade Kits School Upgrade Kits Part Number All Designs and Finishes Description + + + CYLINDRICAL + Classroom to Corridor 40-300 KIT, ND70 TO 73 CONVERSION 40-309 KIT, ND94 TO 97 CONVERSION $106.00 161.00 Order Example: 40-300 TLR 613 + + Classroom to Classroom Security 40-301 KIT, ND70 TO 75 CONVERSION, KIL 40-302 KIT, ND70 TO 75 CONVERSION, FSIC 40-303 KIT, ND70/60 TO 75 CONVERSION, SFIC 40-304 6 KIT, ND70 TO 75 CONVERSION, KIL SAR 40-305 6 KIT, ND70 TO 75 CONVERSION, FSIC SAR 40-306 6 KIT, ND70 TO 75 CONVERSION, FSIC YA6 40-307 6 KIT, ND70 TO 75 CONVERSION, FSIC CO6 40-310 KIT, ND94 TO 95 CONVERSION, KIL 40-311 KIT, ND94 TO 95 CONVERSION, FSIC 40-312 KIT, ND94/93 TO 95 CONVERSION, SFIC 40-313 6 KIT, ND94 TO 95 CONVERSION, KIL SAR 40-314 6 KIT, ND94 TO 95 CONVERSION, FSIC SAR 40-315 6 KIT, ND94 TO 95 CONVERSION, FSIC YA6 40-316 6 KIT, ND94 TO 95 CONVERSION, FSIC CO6 $224.00 A-Series AL-Series 279.00 Order Example: 40-312 RHO 626 SFIC ONLY Vestibule to Classroom Security 40-308 KIT, ND60 TO 75 CONVERSION 40-303 KIT, ND70/60 TO 75 CONVERSION, SFIC 40-317 KIT, ND93 TO 95 CONVERSION 40-312 KIT, ND94/93 TO 95 CONVERSION, SFIC ALX-Series + + $138.00 224.00 192.00 279.00 Order Example: 40-303 SPA 606 + + D-Series + $106.00 ND-11 Classroom/Classroom Security to Entrance/Storeroom 40-325 KIT, ND70, ND94 TO ND50 CONVERSION 40-326 KIT, ND75, ND95 TO ND50 CONVERSION 40-327 KIT, ND70, 94 to ND80 CONVERSION 40-329 KIT, ND75, ND95 TO ND80 CONVERSION 40-332 KIT, ND70, ND94 to ND91 CONVERSION 40-330 KIT, ND75, ND95 to ND91 CONVERSION 40-328 KIT, ND70, ND94 to ND96 CONVERSION 40-331 KIT, ND75, ND95 to ND96 CONVERSION + 161.00 Note: Order Example - 40-332 RHO 626 Price Book 8 Effective April 4, 2020 • Rev. 04/20 121 ND Levers • Conversion Guide Conversion Guide CYLINDRICAL Lock Structure Non-Keyed Locks Function ND10 Outside Spring Cage Original New N123-043 N523-218 Inside Spring Cage Original New N123-032 N523-221 Outside Closed ND12 N123-022 N123-032 Closed A-Series Single Cylinder Locks AL-Series Single Cylinder w/ Push Button ALX-Series Double Cylinder Locks - - N123-032 N523-221 - - - 63-104 N523-223 - N523-218 N123-032 N523-221 Closed Push Button N123-022 Closed Closed ND40* N123-022 N523-218 N123-032 N523-221 Privacy Push Button ND44** N123-022 N523-218 N123-032 N523-221 Privacy Push Button ND45* N123-022 N523-218 N123-032 N523-221 Privacy Closed ND60 N123-022 N523-218 N123-021 N523-222 Closed Cylinder ND70 N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND80 N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND25X80 - - N123-021 N523-222 - Cylinder ND25X70 - - N123-021 N523-222 - Cylinder ND94 N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND96 N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND50* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button ND53* N123-022 N523-218 N123-032 N523-221 Cylinder Push & Turn Button ND73* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button ND85* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button ND91* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button ND92* N123-022 N523-218 N123-032 N523-221 Cylinder Push & Turn Button ND97* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button ND60 N123-022 N523-218 N123-021 N532-222 Cylinder Cylinder ND66 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND75 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND82 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND70X80 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND72 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND93 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND95 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder ND12EL N123-022 N523-218 N123-032 N523-221 Closed Closed ND12EU N123-022 N523-218 N123-032 N523-221 Closed Closed ND80EL N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND80EU N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND96EL N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND96EU N123-022 N523-218 N123-032 N523-221 Cylinder Closed ND-12 Price Book 8 122 Closed ND170 D-Series Electrified N523-221 ND25 ND30* Non-Keyed w/ Push Button N523-218 Levers - see chart Inside Closed Effective April 4, 2020 • Rev. 04/20 Conversion Guide • ND Levers Lever Conversion Lever Type Original 03-030 New 03-230 Available Designs** ATH, RHO, SPA, TLR, OME Privacy Push or Push & Turn Button 03-031 03-231 ATH, RHO, SPA, TLR, OME 03-031 03-233 ATH, RHO, SPA, TLR, OME Cylinder - Schlage KIL (P,L) 03-031 03-231 ATH, RHO, SPA, TLR, OME Cylinder - Schlage FSIC (R,J,T) 03-032 03-232 ATH, RHO, SPA, TLR, OME Cylinder - Schlage SFIC (B, BDC, G, H) 03-000 03-200 ATH, RHO, SPA, TLR, OME Cylinder - CR* KIL (L-CO6) - 03-234 ATH, RHO, SPA, TLR Cylinder - CR* FSIC (J-CO6) 03-066 03-266 ATH, RHO, SPA, TLR - 03-235 RHO Cylinder - Medeco 31 (J-YA6) 03-055 03-255 ATH, RHO, SPA, TLR Cylinder - Medeco 32 (J-MED) - 03-237 ATH, RHO, SPA, TLR Cylinder - Sargent KIL (L-SAR) 03-044 03-244 ATH, RHO, SPA, TLR Cylinder - Sargent FSIC (J-SAR) 03-077 03-277 ATH, RHO, SPA, TLR Cylinder - Yale FSIC (J-YA6) 03-055 03-255 ATH, RHO, SPA, TLR Cylinder - CR* 7-pin FSIC (J-CO7) - 03-236 RHO 03-000 03-200 RHO, SPA, ATH, TLR, OME A-Series Cylinder - Yale 7-pin FSIC (J-YA7) Cylinder - Best CYLINDRICAL Closed CR*: Corbin Russwin Available Designs**: ATH=Athens, RHO=Rhodes, SPA=Sparta, TLR=Tubular, OME=Omega Spring Cage Conversion PD, ZD, LD, JD, RD BDC, BD, GD, HD N123-056 LD SAR , LD CO6 N123-064 JD C06, JD SAR, JD CO7 N123-066 JD YA6/MED 31, JD YA7, JD MED 32 N123-065 Button Conversion N523-218 Inside Spring Cages Original New N123-021 N123-057 N123-067 AL-Series Outside Spring Cages Original New N123-022 Cylinder Format N523-222 N123-069 N523-224 N123-068 N523-225 Original New SCH-FSIC N523-127 SCH-SFIC N523-091 Push N523-000 N523-209 LD SAR 09-060 LD CO6 10-140 Push & Turn Button N523-001 N523-210 JD YA6/MED 31 09-061 JD CO7 10-141 85 Function N523-124 N523-211 JD CO6 09-062 JD YA7 10-142 JD SAR 09-063 JD MED 32 10-143 ALX-Series Tailpiece Kits Original D-Series Plunger Assembly Conversion New Push and Turn Button Plunger Bar (ND53, ND91) N123-017 N123-085 Push Button Plunger Bar (ND30,ND40,ND44,ND50,ND73,ND91,ND97) N123-028 N123-086 Push Button Plunger Bar (ND85) 24071920 N123-087 ND-13 Price Book 8 Effective April 4, 2020 • Rev. 04/20 123 ND Levers • Parts Levers 605 606 612 A-Series CYLINDRICAL Available Finishes • 605 606 612 ALX-Series AL-Series Available Finishes D-Series • 613 619 622 625 626 643e 626AM • • • • • • • Part Number* Description Price Each New Product beginning February 2017 03-230 Lever - Closed; ATH, RHO, SPA, TLR, OME 03-233 Lever - Push or Push & Turn Button; ATH, RHO, SPA, TLR, OME 03-231 Lever - Cylinder - Schlage KIL (P,L,C,Z); ATH, RHO, SPA, TLR, OME $140.00 03-232 Lever - Cylinder - Schlage FSIC (R,J,T); ATH, RHO, SPA, TLR, OME 03-200 Lever - Cylinder - Schlage SFIC (B,BDC,G,H); ATH, RHO, SPA, TLR, OME 03-234 Lever - Cylinder - CR KIL (L-CO6); ATH, RHO, SPA, TLR 03-266 Lever - Cylinder - CR FSIC (J-CO6); ATH, RHO, SPA, TLR 03-235 Lever - Cylinder - CR 7-pin FSIC (J-CO7); RHO 03-255 Lever - Cylinder - Medeco 31 (J-YA6); ATH, RHO, SPA, TLR 252.00 03-237 Lever - Cylinder - Medeco 32 (J-MED); ATH, RHO, SPA, TLR 03-244 Lever - Cylinder - Sargent KIL (L-SAR); ATH, RHO, SPA, TLR 03-277 Lever - Cylinder - Sargent FSIC (J-SAR); ATH, RHO, SPA, TLR 03-255 Lever - Cylinder - Yale FSIC (J-YA6); ATH, RHO, SPA, TLR 03-236 Lever - Cylinder - Yale 7-pin FSIC (J-YA7); RHO Original Product** 03-030 Lever - Closed; ATH, RHO, SPA 03-031 Lever - Cylinder - Schlage Open (P,L,C,Z); ATH, RHO, SPA 140.00 03-032 Lever - Cylinder - Schlage FSIC (R,J,T); ATH, RHO, SPA 03-000 Lever - Cylinder - Schlage SFIC (B,BDC,G,H); ATH, RHO, SPA * Specify part number and finish. Ex: 03-231 ATH 626 ** All lever service items for original product supporting Non-SCHLAGE cores and TLR and OME need to convert to the new product. New Lever Options ND-14 • Part Number • Description Suffix 47258044 Lever - Closed 47258056 Lever - Push or Push & Turn Button 47258052 Lever - Cylinder - Schlage FSIC (R,J,T) 47258048 Lever - Cylinder - Schlage KIL (P,L,C,Z) 47258040 Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47258043 Lever - Closed 47258055 Lever - Push or Push & Turn Button 47258051 Lever - Cylinder - Schlage FSIC (R,J,T) 47258047 Lever - Cylinder - Schlage KIL (P,L,C,Z) 47258039 Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47258045 Lever - Closed 47258057 Lever - Push or Push & Turn Button 47258053 Lever - Cylinder - Schlage FSIC (R,J,T) 47258049 Lever - Cylinder - Schlage KIL (P,L,C,Z) 47258041 Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47258046 Lever - Closed 47258058 Lever - Push or Push & Turn Button 47258054 Lever - Cylinder - Schlage FSIC (R,J,T) 47258050 Lever - Cylinder - Schlage KIL (P,L,C,Z) 47258042 Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47260554* Lever - Closed 47260542* Lever - Push or Push & Turn Button 47260546* Lever - Cylinder - Schlage FSIC (R,J,T) 47260550* Lever - Cylinder - Schlage KIL (P,L,C,Z) 47260538* Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47260553* Lever - Closed 47260541* Lever - Push or Push & Turn Button 47260545* Lever - Cylinder - Schlage FSIC (R,J,T) 47260549* Lever - Cylinder - Schlage KIL (P,L,C,Z) 47260537* Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47260555* Lever - Closed 47260543* Lever - Push or Push & Turn Button 47260547* Lever - Cylinder - Schlage FSIC (R,J,T) 47260551* Lever - Cylinder - Schlage KIL (P,L,C,Z) 47260539* Lever - Cylinder - Schlage SFIC (B,BDC,G,H) 47260556* Lever - Closed 47260544* Lever - Push or Push & Turn Button 47260548* Lever - Cylinder - Schlage FSIC (R,J,T) 47260552* Lever - Cylinder - Schlage KIL (P,L,C,Z) 47260540* Lever - Cylinder - Schlage SFIC (B,BDC,G,H) * Specifies Tactile Lever • 613 619 622 625 626 643e 626AM • • • Price Each Design BOARDWALK BOARDWALK BOARDWALK BOARDWALK BOARDWALK BROADWAY BROADWAY BROADWAY BROADWAY BROADWAY LATITUDE LATITUDE LATITUDE LATITUDE LATITUDE LONGITUDE LONGITUDE LONGITUDE LONGITUDE LONGITUDE BOARDWALK BOARDWALK BOARDWALK BOARDWALK BOARDWALK BROADWAY BROADWAY BROADWAY BROADWAY BROADWAY LATITUDE LATITUDE LATITUDE LATITUDE LATITUDE LONGITUDE LONGITUDE LONGITUDE LONGITUDE LONGITUDE Design Code BRK BRK BRK BRK BRK BRW BRW BRW BRW BRW LAT LAT LAT LAT LAT LON LON LON LON LON BRK BRK BRK BRK BRK BRW BRW BRW BRW BRW LAT LAT LAT LAT LAT LON LON LON LON LON Price Book 8 124 • Effective April 4, 2020 • Rev. 04/20 $140.00 $187.00 • • • • Parts • ND Levers Spring Cages CYLINDRICAL Part Number Description Price Each New Product beginning February 2017 N523-218 Springcage & Lever Catch Assy. - Outside Standard $71.50 (P, L, C, Z, R, J, T, B, BDC, G, H, L-SAR , L-CO6, J-C06, J-SAR, J-CO7) N523-222 Springcage & Lever Catch Assy. - Inside with Cylinder 71.50 (P, L, C, Z, R, J, T, B, BDC, G, H, L-SAR , L-CO6, J-C06, J-SAR, J-CO7) N523-224 Springcage & Lever Catch Assy. - Outside Competitor Cores 148.00 (J-YA6, J-YA7, J-MED) Springcage & Lever Catch Assy. - Inside Competitor Cores N523-225 148.00 (J-YA6, J-YA7, J-MED) N523-221 Springcage & Lever Catch Assy. - Inside Less Cylinder 50.30 N523-223 Springcage & Lever Catch Assy. - Dummy Function 123.00 Original Product*** N123-021 Inside spring cage for all double cylinder functions except SFIC $71.50 N123-022 Outside spring cage for all functions except SFIC and ND10 71.50 N123-032 Inside Spring Cage for all functions except double cylinder functions 51.60 N123-043 Outside spring cage ND10 60.70 N123-056 Outside spring cage for all SFIC functions 74.80 N123-057 Inside spring cage for all SFIC double cylinder functions 47.30 *** All spring cage service items for the original product supporting Non-SCH cores need to convert to the new product. 605 606 Available Finishes Part Number 40-400 40-600 Notes: • Backset - Description Outside Spring Cage / Lever Conversion Kit Inside Spring Cage / Lever Conversion Kit • 612 613 619 622 • • • • Price Each 625 626 643e 626AM • • • A-Series Conversion Kits $228 All kits will contain a spring cage and lever. Some kits will contain a button or tailpiece. AL-Series Kits are limited to previously offered product - KIL, FSIC, SFIC, L-SAR, J-SAR, J-CO6, J-YA6 When ordering specify: Function, Trim, Finish and Core (if applicable) Roses 605 606 Available Finishes • 612 613 619 622 • • • • Price Each 107.00 110.00 625 626 643e 626AM • • • ALX-Series Part Number Description 03-042* Outside / Inside Rose - RHO OME N523-002* Blank Plate, ND25 (not available in 626AM) XN12-035 Indicator Rose - Rhodes (626 Only) XN12-045 Indicator Rose - Omega (626 Only) * Specify part number and finish. Ex: 03-042 OME 626 • 132.00 Buttons / Plunger Assemblies 605 606 Available Finishes • • 612 613 619 622 • • • • • • • D-Series ND-15 Part Number Description Price Each New Product beginning February 2017 N123-034* Emergency Button and Plunger (ND40 outside) $72.00 N123-035* Emergency Turn Button and Plunger (ND44 outside) 135.00 N523-209* Button - Push (ND30,ND40,ND44,ND50,ND73,ND91,ND97) 10.10 N523-210* Button - Push & Turn Button (ND53,ND92) 19.30 N523-211* Button - Push (ND85) 11.40 N123-085** Push and Turn Plunger Bar (ND53, ND91) 12.90 N123-086** Push Button Plunger Bar (ND30,ND40,ND44,ND50,ND73,ND91,ND97) 14.20 N123-087** Push Button Plunger Bar (ND85) 12.60 Original Product N523-000* Button - Push (ND30,ND40,ND44,ND50,ND73,ND91,ND97) $10.10 N523-001* Button - Push & Turn Button (ND53,ND92) 19.30 N523-124* Button - Push (ND85) 11.40 * Specify part number and finish. Ex: N523-210 626 ** Plunger assemblies will support both new (smaller dia.) and old (larger dia.) buttons; finish specification is not required 625 626 643e 626AM Price Book 8 Effective April 4, 2020 • Rev. 04/20 125 ND Levers • Parts Latches / Related Components 605 606 612 CYLINDRICAL Available Finishes Part Number* Spring Latch 13-248 14-010 Dead Latch 14-047 14-048 13-247 14-042 14-028 43-005 39-030 * • Description • • 613 • 619 622 625 626 643e 626AM • • Price Each • • • $92.80 111.00 2 3/4" - Square corner, 1 1/8" x 2 1/4" 3 3/4" - Square corner, 1 1/8" x 2 1/4" 121.00 121.00 92.80 369.00 111.00 34.10 2 3/8" - Square corner, 1 1/8" x 2 1/4" 2 3/8" - Square corner, 1" x 2 1/4" 2 3/4" - Square corner, 1 1/8" x 2 1/4" 2 3/4" - Anti-friction Fire Door Latch 1" Square corner, 1 1/8" x 2 1/4", 3/4" Throw 3 3/4" - Square corner, 1 1/8" x 2 1/4" 5" - Backset extension link - use with 2 3/4" backset latches Rabbeted latch and strike kit - adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations. (Available in 626 and 605) Specify part number and finish. Ex: 13-248 622 59.80 Strikes 605 606 612 ALX-Series AL-Series A-Series Available Finishes • Part Number 10-013-118* 10-013-112* 10-016* Lip Length - Description 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 1 1/8"" - Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8" Use with fire door latch 10-025-1316* 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 10-025-138* 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 10-025-112* 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8" K510-066 Box for ANSI strike * Specify part number and finish. Ex: 10-025-1316 626 • • 613 • 619 622 625 626 643e 626AM • • Price Each $15.70 15.70 • • • 15.70 15.70 45.00 7.00 Cylinder Reference Table Part Number* Cylinder Mechanism 23-065 Standard 91-018 Everest SL (R/B Keyways only) 20-765 Primus 20-765-XP Primus XP 91-718-XP Everest SL Primus XP (R/B Keyways only) 20-565 Primus UL437 20-565-XP Primus UL437 XP 91-518-XP Everest SL UL437-XP 23-000 Standard * Specify part number and finish. Ex: 23-065 626 Function Standard Function Design Price Each Open $65.00 Price Each Restricted $83.00 83.00 145.00 145.00 All 174.00 179.00 96.00 ND85 114.00 ND-16 D-Series Tailpieces Part Number N523-127 N523-091 09-060 09-061 09-062 09-063 10-140 10-141 10-142 10-143 09-774 D500-000 XN12-292 Description Core Driver - SCH FSIC Core Driver - SCH SFIC Core Driver - LD SAR Core Driver - JD YA6 Core Driver - JD CO6 Core Driver - JD SAR Core Driver - LD CO6 Core Driver - JD CO7 Core Driver - JD YA7 Core Driver - JD MED SFIC Core Driverand Spacer SFIC Core Spacer - Spacer required for 6-pin, no spacer required for 7-pin Tail piece Sargent XC SFIC Price Book 8 126 Effective April 4, 2020 • Rev. 04/20 Price Each 3.10 12.40 12.40 12.40 12.40 12.40 23.70 23.70 24.70 15.50 1.60 13.40 Parts • ND Levers Chassis Kits Function ND10 ND10 RX ND12EL RX ND12EU ND12EU RX Passage latch Exit lock Electrically locked exit lock Electrically unlocked exit lock Name Price Each 24088254 ND10 CHASSIS ONLY $97.00 S00031769709-KIT 24088429 ND10RX CHASSIS ONLY 196.00 S00031721363-KIT 24088262 ND12/80 CHASSIS ONLY 110.00 S00033868134-KIT 63-180 ND12/80EL CHASSIS ONLY 137.00 S00033868172-KIT 63-184 ND12/80EL RX CHASSIS ONLY 478.00 S00033868141-KIT 63-181 ND12/80EU CHASSIS ONLY 478.00 S00033868189-KIT 63-185 ND12/80EU RX CHASSIS ONLY 478.00 Exit lock S00031721394-KIT 24088296 ND25 CHASSIS ONLY 62.00 ND25X70 Classroom exit lock S00031720557-KIT 24088213 ND25X70 CHASSIS ONLY 76.00 S00031720946-KIT 24088221 ND25X80 CHASSIS ONLY 77.00 S00031733663-KIT 24088304 ND30/40/44 CHASSIS ONLY 156.00 S00031969024-KIT 24210718 ND45 CHASSIS ONLY 107.00 S00031721097-KIT 24088247 ND50/53 CHASSIS ONLY 108.00 Storeroom exit lock Patio lock ND40 Bath/Bedroom privacy lock ND44 Hospital privacy lock ND45 Time out lock ND50 Entrance/office lock ND53 Entrance lock ND60 Vestibule with closed outside lever S00031733762-KIT 24088320 ND60/XN12-001 CHASSIS ONLY 112.00 ND66 Store lock S00031733793-KIT 24088338 ND66 CHASSIS ONLY 244.00 ND70 Classroom lock S00031733809-KIT 24088346 ND70 CHASSIS ONLY 102.00 ND70X80 Classroom by storeroom lock S00031720984-KIT 24088239 ND70X80 CHASSIS ONLY 99.00 ND72 Communicating lock S00031720328-KIT 24088197 ND72 XN12-002 CHASSIS ONLY 96.00 ND73 Corridor lock S00031733830-KIT 24088353 ND73 CHASSIS ONLY 84.00 ND75 Classroom security lock S00031719902-KIT 24088163 ND75 CHASSIS ONLY 229.00 ND80 Storeroom lock ND80EL RX ND80EU ND80EU RX Electrically locked storeroom lock Electrically unlocked storeroom lock S00031721363-KIT 24088262 ND12/80 CHASSIS ONLY 110.00 S00033868134-KIT 63-180 ND12/80EL CHASSIS ONLY 437.00 S00033868172-KIT 63-184 ND12/80EL RX CHASSIS ONLY 478.00 63-181 ND12/80EU CHASSIS ONLY 437.00 63-185 ND12/80EU RX CHASSIS ONLY 478.00 102.00 ND82 Institution lock S00031733847-KIT 24088361 ND82 CHASSIS ONLY ND85 Faculty restroom lock S00031733977-KIT 24088411 ND85 CHASSIS ONLY 111.00 ND72 Communicating lock S00031720458-KIT 24088209 ND72 XN12-003 CHASSIS ONLY 152.00 S00031733861-KIT 24088379 ND91/92 CHASSIS ONLY 166.00 ND 91 Entrance/office lock ND92 Entrance lock Vestibule lock S00031733878-KIT 24088387 ND93 CHASSIS ONLY 170.00 Classroom lock S00031733892-KIT 24088395 ND94 CHASSIS ONLY 160.00 ND95 Classroom security lock S00031720168-KIT 24088171 ND95 CHASSIS ONLY 286.00 ND96 Storeroom lock S00031733922-KIT 24088403 ND96 CHASSIS ONLY 168.00 S00033868158-KIT 63-182 ND96EL CHASSIS ONLY 494.00 S00033868196-KIT 63-186 ND96EL RX CHASSIS ONLY 535.00 S00033868165-KIT 63-183 ND96EU CHASSIS ONLY 494.00 S00033868202-KIT 63-187 ND96EU RX CHASSIS ONLY 535.00 S00031720281-KIT 24088189 ND97 CHASSIS ONLY 142.00 ND96EL ND96EL RX ND96EU ND96EU RX ND97 Electrically locked storeroom lock Electrically unlocked storeroom lock Corridor lock INCLUDES 1 SLIDE SPRING 6 CHASSIS SCREW 23 OUTSIDE HOUSING 24 INSIDE HUB 29 SLIDE 30 37 38 52 53 ND-17 EXAMPLE: ND10 PASSAGE LATCH KIT # S00031721271-KIT D-Series ND93 ND94 ALX-Series S00033868141-KIT S00033868189-KIT AL-Series ND25X80 ND30 A-Series ND25 ND80EL VANDLGARD Number S00031721271-KIT CYLINDRICAL ND12 ND12EL Description SLIDE CLIP ADJUSTMENT PLATE SPINDLE GAUGE INSERT INSERT, INSIDE HUB Price Book 8 Effective April 4, 2020 • Rev. 04/20 127 ND Levers • Parts Keycam Assemblies CYLINDRICAL Part Number Description N223-066 Electrified Keycam Assembly (Motor) - ND12EL/EU, ND80EL/EU, & ND96EL/EU N123-045 N123-007 N123-010 N123-059 N123-008 N123-055 N123-011 N123-012 N123-098 N123-013 N123-097 N523-065 N523-066 N123-076 Keycam Assembly ND40, ND44 Keycam Assembly ND50, ND53, ND60 Keycam Assembly ND73, ND70, ND72, ND25x70, ND70x80 Outside Keycam Assembly ND75, ND95 Inside Keycam Assembly ND82, ND12, ND80, ND25x80, ND70x80 Inside Keycam Assembly ND85 Keycam Assembly ND91, ND92, ND93 Keycam Assembly ND94 Keycam Assembly ND95 Outside Keycam Assembly ND96 Keycam assembly ND97 Cam pin for ND60 and ND93 Cam for inside ND60 and ND93 Keycam Assembly ND66 Outside and Inside, and ND75 Outside Price Each $36.50 7.40 17.50 17.60 76.60 21.20 103.00 23.90 23.90 103.00 19.60 19.80 5.50 58.60 99.00 AL-Series A-Series Slide / Related Components Part Number C503-019 C604-187 C604-188 C604-191 N523-025 N523-149 Description Slide Spring Slide Catch Restoring Slide Catch Non-restoring Slide Catch Spring Slide Clip Slide (previous part number was N523-024) Price Each $6.90 7.60 7.60 7.60 4.60 22.00 Spindles Part Number Description N523-013 Outside Spindle N523-019 Outside Electrified Spindle N523-177 Inside Spindle Price Each $12.50 11.90 3.90 ND-18 D-Series ALX-Series Electrified Chassis Components Part Number 24088551 N623-017 N223-062 N223-063 N523-131 N523-194 N123-062 Description Outside Electrified Housing Inside Electrified Hub Motor Assembly Non-Vandlgard Motor Assembly Vandlgard Anti-rotation plate - RX product RX Switch RX Upgrade Kit Price Each $12.80 7.20 312.00 343.00 8.80 62.90 72.20 Misc. Chassis Components Part Number C503-331 24088544 24085037 24085060 N523-020 N523-041 N523-054 N523-055 N523-063 N523-064 N523-067 N523-069 N523-105 Description Plunger Spring (order in multiples of 50) Outside Housing Inside Hub for all Non-electrified functions except the ND66 and ND82 Inside Hub for ND66 & ND82 Functions Emergency cylinder for ND40 & ND44 functions Catch stop Adjustment Plate Anti-rotation plate Plunger Sleeve for ND60 and ND93 Plunger for ND60 and ND93 Plunger Bar for ND66 Dummy Insert for ND170 Threaded rod for mounting ND170s as double dummy set Price Book 8 128 Effective April 4, 2020 • Rev. 04/20 Price Each $0.14 12.30 5.40 5.40 5.70 5.60 5.60 5.60 4.00 14.00 4.00 14.00 5.60 Parts • ND Levers Special Parts, Hollow Metal Door Reinforcements, Screws Special Parts 605 606 612 Available Finishes Part Number • • • 613 • Description 619 622 625 626 643e 626AM • • • • • • Price Each XQ02-309* ** XQ03-494* ** CYLINDRICAL 10-013 Strike, 7/8" flat lip 41.80 10-013 Strike, 1 5/8" – 6" lip 175.00 10-013 Strike, 6 1/8" – 12" lip 222.00 XQ07-351* ** 10-025 Strike, 7/8" flat lip 44.00 10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 3/8" and 1 1/2") 212.00 XC03-069 Extension Links, used with 2-3/4" backset latch, range over 5" - 42"; 783.00 not adjustable XN12-012* Chassis Spacer for 1 3/8" door (2 required) 81.40 XN13-052 Lever - Break-Away - Schlage KIL (P,L,C,Z); RHO XN13-054 Lever - Break-Away - Schlage FSIC (R,J,T); RHO 406.00 XN13-053 Lever - Break-Away - Schlage SFIC (B,BDC,G,H); RHO * Specify part number and finish. Ex: XN12-012 626 ** Specify lip length. Hollow Metal Door Reinforcements 24483760 A501-565 A501-566 A501-567 Description Metal door reinforcer kit, fits both 7/8" and 1" diameter housings - Specify door thickness, includes A501-567 and A501-565 or A501-566 Latch Spacer – fits 1" diameter latch housing and 1-3/4" hollow metal doors (steel & aluminum) Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold latch in metal doors Price Each B250-1 A-Series Part Number 37-001 $40.50 $5.60 $20.40 12.70 605 606 612 Available Finishes Description A501-171* ** N523-092* ** L583-133* ** C603-256* ** C603-897* ** N523-021** N623-030 N523-135 N523-240 L583-454 ND170, washer ND170, mounting screw ND170, mounting surface ANSI strike Latch and strike Spring cage screws Motor assembly RX switch Chassis to spring cage Chassis * ** Door Thickness — 1 1/2" – 2" — — — 1 3/8" – 2" — — — — • • 613 • 619 622 625 626 643e 626AM • • Type Size Price Each Washer POH Machine Sheet Metal PFH Combo PFH Combo PFH Machine PFH Combo Hex B.H. PFH Combo PFH — 1/4" 20 x 2 1/2" 1#8 x 1" 12-24 x 1" #8 x 3/4" #10 x 32 x 2 1/8" #4-40 X 3/16 #2-56 x 3/8" #8-32 X 1/4" #8-32 X 3/8" $1.20 1.40 0.92 1.00 0.92 2.00 5.60 0.62 0.60 1.50 • • • ALX-Series Part Number • AL-Series Screws Specify part number and finish. Ex: C603-256 626 Order in multiples of 100 D-Series ND-19 Price Book 8 Effective April 4, 2020 • Rev. 04/20 129 ND Levers • Parts Allegion Connect Harnesses, Screw Packs, Torx Screw Packs Screw Packs 605 606 612 CYLINDRICAL Available Finishes Part Number* • • 613 • 619 622 625 626 643e 626AM • • Contents Price Each B202-517 Latch and strike (4) C603-897 $8.50 C203-736 ANSI strike (2) C603-256 6.80 N123-020 Mounting, all except ND170 (4) C603-897 (2) C603-256 (2) N523-021 (1) M504-271 9.00 (2) L583-133 (1) N523-092 (1) A501-171 (1) M504-271 10.50 N123-040 * Description • Mounting, ND170 • • • Specify part number and finish. Ex: N123-020 626 ALX-Series AL-Series A-Series Screws Packs, Torx 605 606 612 Available Finishes Part Number* Description • • Contents C203-311 Latch and strike (T-15 installation tool included) (4) C503-766 (T-15) C203-312 Latch and ANSI strike (T-xx installation tool included) (2) C503-766 (T-15) (2) L583-371 (T-20) • 613 • 619 622 625 626 643e 626AM • • • • • Price Each $21.90 Allegion Connect Harnesses - Prices listed are net, discounting does not apply Part Number Description Price Each Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors) CON-6 6" Wire Harness (internal p/n 106190-00) $10.80 CON-12 12" Wire Harness (internal p/n 106191-00) 14.40 CON-26 26" Wire Harness (internal p/n 106192-00) 16.30 CON-32 32" Wire Harness (internal p/n 106193-00) 17.40 CON-38 38" Wire Harness (internal p/n 106194-00) 19.10 CON-44 44" Wire Harness (internal p/n 106195-00) 18.50 CON-50 50" Wire Harness (internal p/n 106196-00) 19.10 CON-192 192" Wire Harness (internal p/n 106197-00) 45.50 D-Series Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors) CON-6P 6" Wire Harness (internal p/n 106201-00) 13.80 CON-12P 12" Wire Harness (internal p/n 106202-00) 17.40 CON-26P 26" Wire Harness (internal p/n 106203-00) 19.10 CON-32P 32" Wire Harness (internal p/n 106204-00) 20.40 CON-38P 38" Wire Harness (internal p/n 106205-00) 20.90 CON-44P 44" Wire Harness (internal p/n 106206-00) 21.50 CON-50P 50" Wire Harness (internal p/n 106207-00) 22.20 CON-192P 192" Wire Harness (internal p/n 106208-00) 47.90 Harness with Molex Connector on one end, stripped leads on other (for connection to power supply) ND-20 CON-6W 6" extension to power supply (internal p/n 106210-00) $13.80 Harness with Molex Connector on one end, stripped leads on other (for connection to power supply) CON-KIT Connector Service Kit (internal p/n 050823-00-00) contains: -100 each male & female terminals -10 each 4-pin and 8-pin male connectors -10 each 4-pin and 8-pin female connectors - 1 extraction tool" Price Book 8 130 Effective April 4, 2020 • Rev. 04/20 $114.00 B250 Series Grade 2 Deadlatch B250-Series Exploded View - B250PD DEADBOLT Mounting screws Inside thumbturn with holdback 7/16" Hardened steel insert 7/16" Trim ring 1/8" Hardened steel insert 1/8" Trim ring B250-1 B500-Series Box B600/700/800-Series Strike Cylinder housing 5-Pin cylinder Tailpiece Deadlatch 9/16" Throw Door Preparation Price Book 8 Effective April 4, 2020 • Rev. 04/20 131 B250 Series Ordering Procedures DEADBOLT To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 Product 10 B252P DES FIN Inside DES 626 FIN Hand 613 Latch Strike Dr Thk Ext DIM Additional Details 12-103 10-025 214 EE 1316 KA Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: B500-Series B250-2 Line item number Quantity Product function + cylinder code Outside lever design, not applicable for deadbolts. Leave blank Outside finish Inside lever design, not applicable for deadbolts. Leave blank Inside finish, specify only if different from the outside finish Hand of door, not applicable for deadbolts. Leave blank Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike Door thickness, leave blank for standard thickness or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4" Extension, enter one of the following when door thicknesses 2" or greater are specified: EE = Extended Equally, EI = Extended Inside, EO = Extended Outside Dim: Dimension, enter only for non-standard strike lip length Additional Details: Enter additional detail for keying information or special requirements B600/700/800-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified with “C” keyway and KD or 0-bitted will receive 6 pin cylinders. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 132 Effective April 4, 2020 • Rev. 04/20 Introduction B250 Table of Contents 50 P D X Screw Suffix Recess Head X = Cross Mounting Screws Latch Suffix D = Deadlatch Cylinder Suffix P5 = Conventional, 5 Pin P6 = Conventional, 6 Pin R = FSIC J = Less FSIC M = SL - FSIC T = FSIC - Construction Core SL Conventional Cylinder, Z = 7 pin Function Lock Series Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Oil Rubbed Bronze Matte Black Bright Chromium Plated Satin Chromium Plated B600/700/800-Series Code 605 (US 3) 606 (US 4) 609 (US 5) 613 (US 10B) 622 (US 19) 625 (US 26) 626 (US 26D) B500-Series Contact your local RSO or Sales Rep. for ordering details B2 B250-3 BAA/ARRA Product Identification DEADBOLT Functions B250-4 B250-4 Complete Locks Options B250-6 Deadlatches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-6 Stikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-6 Locks Less Components. . . . . . . . . . . . . . . . . . . . B250-6 Tamper-Resistant Screws and Torx® Screws . . . . . . . . . . . . . . . . . . . . . . . . . . B250-6 Special Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-6 Parts B250-7 Latches & Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . B250-7 Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-7 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-7 Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-7 Door Reinforcements . . . . . . . . . . . . . . . . . . . . . . B250-7 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-8 Tailpiece and Screw Packs . . . . . . . . . . . . . . . . . B250-9 Torx® Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . B250-9 Special Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B250-9 Cylinders Only (B100, B250, B400 E/B) . . . . B250-9 Standard Features Certification Latch Strike Backset Cylinder Door Range Keys Trim Rings ANSI/BHMA Certified A156.36-2010, Grade 2 auxiliary lock. 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 9/16" throw deadlatch 1 1/8" x 2 3/4", Square corner, T-strike, box 2 3/8" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 1/2" – 1 3/4" standard cylinder, 1 1/2" - 2 1/8" interchangeable core cylinder Two nickel silver cut keys per lock, 6-pin, S123 section 7/16" and 1/8" Wrought brass or bronze, reinforced with security inserts Price Book 8 Effective April 4, 2020 • Rev. 04/20 133 B250 • Functions ANSI/BHMA Certified A156.36-2010, Grade 2 auxiliary lock. Bored Deadlatch Locks ANSI B250PD E0122 Single Cylinder Deadlatch (Night Latch) Deadlocking latchbolt retracted by key from outside or by inside turn unit. Rotating turn unit and activating hold-back feature keeps latch retracted. B252PD Double Cylinder Deadlatch* Deadlocking latchbolt retracted by key from either side. No hold-back feature. E0112 B600/700/800-Series B500-Series B250-4 DEADBOLT SCHLAGE * Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Price Book 8 134 Effective April 4, 2020 • Rev. 04/20 Complete Locks • B250 Outside Cylinder Trim Inside Cylinder Trim Rose and Turn DEADBOLT Latches 12-100 B250-5 Strikes 10-001 10-004 10-025 B500-Series Function 605 Cylinder Adjustments 613 6 606 609 622 625 Description B600/700/800-Series Finishes 626 JD = Less FSIC RD* = FSIC TD** = FSIC Construction Core JD RD TD** Single Cylinder Function B250PD $282 Single Cylinder Outside, Holdback Turn Inside $288 $298 -$36 $39 329 -72 76 Double Cylinder Function B252PD 313 Double Cylinder * ** 319 Full size core furnished 1-bitted with two 6-pin keys unless otherwise specified. Not available with 0-bitted interchangeable cores. Temporary cores (TD) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. Control Keys are not furnished with locks and must be ordered separately. See Keys & Keying. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. SL Cylinder with Everest B or Everest R keyways add $18.00 See Terms and Conditions for ordering information and requirements. "Ordering instructions: To change cylinder type from default 6-pin standard, change lock suffix as appropriate Ex: B250RD 626 for B250 function with FSIC in 626 finish”. Price Book 8 Effective April 4, 2020 • Rev. 04/20 135 Latches, Strikes, Locks Less Components, Tamper-Resistant Screws, Special Options B250 • Options B600/700/800-Series B500-Series B250-6 DEADBOLT DeadLatches List Price Adjustment Specify Description 12-100 Square corner, 1 1/8" x 2 1/4", 2 3/8" backset, 1" housing diameter, standard latch 12-103 Square corner, 1 1/8" x 2 1/4", 2 3/4" backset, 1" housing diameter N/C Ordering instructions: specify desired latch on order only if requesting different from standard. Strikes List Price Adjustment Specify Description 10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length, standard strike 10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length N/C 10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 8.80 10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length (xx) as 1 3/8" or 1 1/2" 37.70 K510-066 Box for ANSI strike N/C N/C +$7.90 Ordering instructions: specify desired strike on order only if requesting different from standard. Locks Less Components List Price Adjustment Specify Description LLL for deadlatch Less deadlatch Example: B250PD 605 LLL 10-001 -21.60 LLL for strike Less strike Example: B250PD 605 12-100 LLL -6.80 Ordering instructions: specify on order only if requesting different from standard. Non-Standard Door Thickness List Price Adjustment Specify Description Door Thickness Over 1 3/4" - 2 1/4" N/C Door Thickness Over 2 1/4" - 2 3/4" $107.00 Ordering instructions: Specify desired thickness on order only if requesting different from standard. EX: B250PD 626 2" Tamper Resistant and Torx® Screws List Price Adjustment Specify Description X suffix Cross recessed mounting screws and drive pins for B250PD Torx Screws Latch and strike screws N/C $21.90 Ordering instructions: specify on order only if desired option. EX: B250PDX 626 Torx Screws. Special Options 6 Extended Lead Time List Price Adjustment Specify Description Door Thickness + XB03-330 B250PD for doors over 2 3/4" - 5 9/16" $294.00 Door Thickness + XB03-427 B252PD for doors over 2 3/4" - 5 9/16" 328.00 Door Thickness +XB09-62 B250PD less holdback function (substitutes B400 turn) Ordering instructions: specify on order only if desired option. EX: B250PD 626 5" XB03-330. Price Book 8 136 Effective April 4, 2020 • Rev. 04/20 53.10 Parts • B250 Latches & Strikes, Cylinders, Trim, Adapters, Door Reinforcements Latches & Strikes 605 606 609 • Available Finishes Part Number • 612 • 613 622 625 626 • Description • • • • Price Each 12-100 Square corner, 1 1/8" x 2 1/4", 2 3/8" backset, 1" housing diameter, standard latch 12-103 Square corner, 1 1/8" x 2 1/4", 2 3/4" backset, 1" housing diameter 39-030 Rabbeted latch and strike kit, 605 and 626 finish only (adapts square corner & 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preps) DEADBOLT Deadlatches $87.90 59.80 Strikes 10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) 6.50 10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 15.20 10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 11.40 10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 15.70 10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" 45.00 C603-623 Box for T-strike (finish not applicable) 0.72 K510-066 Box for ANSI strike (finish not applicable) 7.00 Ordering Instructions: Specify part number and finish. B250-7 B202-671 B202-672 605 606 609 • Available Finishes Part Number B202-671 B202-672 B502-815 • 612 • 613 622 625 626 • Description Rose and turn without holdback Rose and turn with holdback Blank inside rose with exposed screws for B251, available 605 and 626 finish only • • • • Price Each $53.10 82.00 31.00 38-031 38-032 Adapters Available Finishes Part Number B600/700/800-Series Ordering Instructions: Specify part number and finish if applicable. 605 613 622 626 • • • • 38-016 Description Adapter ring kit for double cylinder locks used in 2 1/8" hole contains: (2) 38-031 38-017 Adapter ring kit for single cylinder locks used in 2 1/8" hole contains: (1) 38-031 and (1) 38-032 38-031 2 1/2" diameter adapter ring for 2 1/8" door prep, mounted under cylinder 19.60 38-032 2 7/8" diameter adapter ring for 2 1/8" door prep, mounted under turn units/blank roses 28.00 Price Each 32.70 42.80 Ordering Instructions: Specify part number and finish. A501-566 Door Reinforcements Part Number A501-565 A501-566 Description Reinforcer for 1 3/8" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings (2 required per lock) Reinforcer for 1 3/4" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings (2 required per lock) Price Each $20.40 Ordering Instructions: Specify part number. Price Book 8 Effective April 4, 2020 • Rev. 04/20 B500-Series Trim 137 B250 • Parts Screws Screws DEADBOLT Available Finishes Part Specify Number Finish Description Size Application Type Use with: Door Thickness 605 606 609 612 613 622 625 626 • • • • • • • • Price Each (Order in multiples of 100) Single Cylinder, B250PD 7/16" & 1/8" trim rings B520-086 • 7/16" trim ring 10-32 x 2 1/4" (2) 1/8" trim rings 7/16" & 1/8" trim rings POH 7/16" trim ring machine 1/8" trim ring B520-087 • 5-Pin 6-Pin 5-Pin 7/16" & 1/8" trim rings 10-32 x 2 5/8" 7/16" trim ring 1 5/16" – under 1 11/16" 1 11/16" – 1 15/16" 1 5/16" – under 1 7/16" 1 7/16" – 1 13/16" over 1 15/16" – 2 1/4" $1.00 over 2 1/4" – 2 9/16" over 1 13/16" – 1 15/16" 6-Pin over 1 15/16" – 2 9/16" 1/8" trim ring over 2 9/16" – 2 3/4" Double Cylinder, B252PD B250-8 7/16" & 1/8" trim rings B520-267 10-32 x 2 1/2" 1/8" trim ring 2 7/16" – 2 11/16" 7/16" & 1/8" trim rings over 1 7/16" – under 1 11/16" 7/16" trim ring B500-Series B520-268 10-32 x 2 3/4" Cross recess 5-Pin over 2 11/16" – 2 7/8" 7/16" & 1/8" trim rings 1 7/16" – under 1 9/16" over 2 11/16" – 2 13/16" (4) 1/8" trim rings 1 3/16" – under 1 7/16" 7/16" trim ring B600/700/800-Series 1/8" trim ring B520-271 • Drive pin $2.60 6-Pin over 1 11/16" – 2 3/16" 1/8" trim ring 7/16" & 1/8" trim rings 10-32 x 3" over 1 15/16" – under 2 7/16" 1/8" trim ring 7/16" trim ring B520-269 1 5/16" – under 1 11/16" 5-Pin 1 11/16" – 1 15/16" 7/16" trim ring 6-Pin 1 9/16" – 1 15/16" over 2 13/16" – 2 11/16" over 2 13/16" – 3 1/8" — — 1.00 Interchangeable Core, Single Cylinder, B250RD B520-086 B520-087 • • 1" & 1/8" trim rings 10-32 x 2 1/4" 10-32 x 2 5/8" 1" trim ring POH 1" trim ring machine 7/16" & 1/8" trim rings 7/16" trim ring 1 5/16" – 1 1/2" over 1 1/2" – 2 1/8" over 2 1/8" – 2 3/8" $1.00 over 2 3/8" – 2 5/8" over 2 5/8" – 3 1/8" Interchangeable Core, Double Cylinder, B252RD B520-269 B520-271 10-32 x 3" • Drive pin Cross recess 1" & 1/8" trim rings 15/16" – 1 5/8" 1" trim ring over 1 5/8" – 2 1/8" 7/16" & 1/8" trim rings over 2 1/8" – 2 3/8" 1" trim ring over 2 3/8" – 2 5/8" $2.60 — — 1.00 PFH ANSI strike combo Latch and strike — $1.00 — 0.92 All Functions C603-256 • 12-24 x 1" C603-897 • 8 x 3/4" Price Book 8 138 Effective April 4, 2020 • Rev. 04/20 Tailpiece and Screw Packs, Torx Screw Packs, Special Parts, Cylinders Only (B100, B250, B400 E/B) Parts • B250 Tailpiece and Screw Packs 605 606 609 • Available Finishes Part Number • • Description 612 613 622 • • • 625 626 • • Price Each B202-509 For 1 3/8" - 1 3/4" doors DEADBOLT Single Cylinder, B250PD $21.90 contains: (1) B202-558 tailpiece (2) B520-086 screws Double Cylinder, B252PD B202-560 5 pin cyl, for 1 1/2"- 1 3/4" doors B220-043 contains: (2) B202-370 tailpiece (2) B202-580 tailpieces (2) B520-267 screws (2) B520-271 screws 6 pin cyl, for 1 3/4" doors only $19.10 contains: (2) B202-369 tailpieces (2) B520-269 screws Latch & Strike Screws, All functions, Standard T Strike B202-517 Latch and strike screws $8.50 contains: (4) C603-897 screws Ordering Instructions: Specify part number and finish. B250-9 Torx Screw Packs 605 606 609 • Available Finishes Description C203-311 Latch and standard strike contains: (4) C503-766 (T-15) C203-312 Latch and ANSI strike contains: (2) C503-766 (T-15) (2) L583-371 (T-20) Notes: • 613 622 • • • 625 626 • • Price Each $21.90 B500-Series Part Number • 612 Torx screw packs are furnished with the appropriate T-xx installation tool(s) Ordering Instructions: Specify part number and finish. Special Parts 6 Extended Lead Time 605 606 609 Part Number Description XQ07-351 xx 10-025 strike, lips through 6" (except 7/8", 11 3/16", 1 3/8" and 1 1/2"). Specify (xx) lip length in part number. XQ03-493 xx 10-001 strike, lips over 2" through 6". Specify (xx) lip length in part number. • • 613 622 • • • 625 626 • • B600/700/800-Series • Available Finishes 612 Price Each $212.00 127.00 Ordering Instructions: Specify part number and finish. Cylinder Only Cylinders Only, B100, B250, B400 E/B Price Each Description Part Number 5-Pin C, CE, E, F only 22-001 6-Pin Standard 22-002 Everest SL (R/B Keyways only) 91-008 Primus 20-729* Primus XP 20-729-XP* Everest SL Primus XP (R/B Keyways only) 91-707-XP Primus UL 437 20-529* Primus XP UL437 20-529-XP* Everest SL UL437-XP 91-507-XP ® Open Restricted $65.00 $83.00 83.00 145.00 145.00 179.00 179.00 * Must be used in locks with universal housings (B202-824 or B202-825). Price Book 8 Effective April 4, 2020 • Rev. 04/20 139 B250 B600/700/800-Series B500-Series B250-10 DEADBOLT Notes Price Book 8 140 Effective April 4, 2020 • Rev. 04/20 B500 Series Grade 2 Deadbolt DEADBOLT Rose and thumbturn mounting screws Rose and ADA compliant thumbturn Mounting screws Steel mounting plate Adjustable backset deadbolt - 2 3/8˝ or 2 3/4˝ 1˝ Throw, with concealed hardened steel roller UL Listed fire cup (for fire rated locks) B250-Series Faceplate screws 2³ ⁄₄ Removable anti-pry shield and trim ring B500-1 1˝ trim ring 6-pin cylinder B600/700/800-Series Metal dust box reinforcer and #12 x 3˝ wood screws Strike Strike screws Price Book 8 Effective April 4, 2020 • Rev. 04/20 141 B500 Series Ordering Procedures DEADBOLT To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 Product 10 B560P DES FIN Inside DES 626 FIN Hand 613 Latch Strike Dr Thk Ext 12-289 10-092 214 EE DIM Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Additional Details KA B500-2 B250-Series Line item number Quantity Product function + cylinder code Outside lever design, not applicable for deadbolts. Leave blank Outside finish Inside lever design, not applicable for deadbolts. Leave blank Inside finish, specify only if different from the outside finish Hand of door, not applicable for deadbolts. Leave blank Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike Door thickness, leave blank for standard thickness or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4" Extension, enter one of the following when door thicknesses 2" or greater are specified: EE = Extended Equally, EI = Extended Inside, EO = Extended Outside Dim: Dimension for non-standard strike lip length, not applicable for the B500. Leave blank Additional Details: Enter additional detail for keying information or special requirements B600/700/800-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified with “C” keyway and KD or 0-bitted will receive 6 pin cylinders. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 142 Effective April 4, 2020 • Rev. 04/20 Introduction B500 Product Identification Table of Contents B5 60 P F UL Listing Suffix F = UL Listed Function B250-Series Cylinder Suffix Conventional, 6 Pin/Keyed P = 5 Pin P6 = Conventional, 6 pin L = Less Conventional, 6 Pin R = FSIC J = Less FSIC M = FSIC - SL T = FSIC - Construction Core B = Less SFIC BDC = Disposable Construction SFIC G7 = SFIC (7 pin) H = Refundable Construction SFIC SL Conventional Cylinder, Z = 7 pin DEADBOLT Functions B500-4 B500-5 Complete Locks Options B500-7 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-7 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-7 Locks Less Components. . . . . . . . . . . . . . . . . . . . B500-7 Non-Standard Door Thickness . . . . . . . . . . . . . B500-7 Antimicrobial Coating. . . . . . . . . . . . . . . . . . . . . . B500-7 Parts B500-8 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-8 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-8 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-8 Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-9 Door Reinforcements . . . . . . . . . . . . . . . . . . . . . . B500-9 Occupancy Indicator Emergency Key . . . . . . . B500-9 Individual Screws . . . . . . . . . . . . . . . . . . . . . . . . . B500-10 Individual Screw Packs. . . . . . . . . . . . . . . . . . . . . B500-11 Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B500-11 See Cylinders Section Complete Cylinders How To Order Forms & Examples Lock Series Contact your local RSO or Sales Rep. for ordering details B500-3 BAA/ARRA SFIC = Small Format (Best® Style) Interchangeable Core Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Satin Bronze Oil Rubbed Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chromium Plated Antimicrobial Coating on Satin Chromium Aged Bronze B600/700/800-Series Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US 10) 613 (US 10B) 619 (US 15) 622 (US 19) 625 (US 26) 626 (US 26D) 626AM 643e Standard Features Certification Deadbolt Strike Backset Cylinder Door Range Keys Reinforcement Trim Ring ANSI A156.36, 2010, Grade 2 (except B581).. Available UL Listed for 3-hour fire door (except B562 and B571) With FSIC Interchangeable Core Cylinders: Grade 2 With SFIC Interchangeable Core Cylinders: Grade 3 1" x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throw 1 1/8" x 2 3/4", Square corner, box Adjustable for 2 3/8" or 2 3/4" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/8" – 1 7/8" standard cylinder or thumbturn only, 1 5/8" - 2" interchangeable core cylinder Two cut keys per lock, 6-pin, S123 section Metal dust box reinforcer with three - 3" screws 1" Wrought brass or bronze, reinforced with security insert Price Book 8 Effective April 4, 2020 • Rev. 04/20 143 B500 • Functions ANSI A156.36-2010, Grade 2. Available UL Listed for 3-hour fire door. B600/700/800-Series B500-4 B250-Series DEADBOLT Bored Deadbolt Locks SCHLAGE ANSI B560P E0152 Single Cylinder Deadbolt Lock Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown. B561P E0162 One-Way Deadbolt Lock Deadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown. B562P E0142 Double Cylinder Deadbolt Lock* Deadbolt thrown or retracted by key either side. Bolt automatically deadlocks when fully thrown. B563P E0172 Classroom Deadbolt Lock Deadbolt thrown or retracted by key outside. Inside turn unit will retract bolt only. Bolt automatically deadlocks when fully thrown. Door Bolt Occupancy Indicator Deadbolt thrown or retracted by inside turn unit. Occupancy indicator on outside (reads either in use or vacant). Can use either 2 1/8" or 1 1/2" cross bore prep. Not UL Rated. B571 B580 E0192 Door Bolt Deadbolt thrown or retracted by turn unit only. No outside trim. Bolt automatically deadlocks when fully thrown. Can use either 2 1/8" or 1 1/2" cross bore prep. B581 E01112 Door Bolt with Trim Deadbolt thrown or retracted by turn unit only. Outside blank plate. Bolt automatically deadlocks when fully thrown. 1 1/2" cross bore prep. * Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Price Book 8 144 Effective April 4, 2020 • Rev. 04/20 Complete Locks • B500 Outside Cylinder Trim Inside Cylinder Trim Rose and Turn DEADBOLT Latches 12-288 Standard 12-289 12-290 12-287 B250-Series Strikes 10-094 Standard 10-064 10-087 10-092 10-095 10-108 B500-5 B600/700/800-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 145 B500 • Complete Locks Cylinder Adjustments J = Less FSIC L = Less Conventional, 6 Pin R* = FSIC (Full Size Interchangable Core) T** =FSIC Construction Core BD = Less SFIC BDC = SFIC Construction Core (disposable) GD = Everest 29 Patented SFIC HD ** = SFIC Construction Core (refundable) Finishes DEADBOLT 605 606 609 612 619 622 625 Function Description 626 643e 613 B580 No trim x thumbturn $66 $72 $82 B580F No trim x thumbturn, firerated 73 79 89 B581 Blank plate x thumbturn 66 72 82 B581F Blank plate x thumbturn, firerated 73 79 89 B571 Occupancy indicator x thumbturn (includes 61-509 emergency release key) 69 75 85 $85 $91 $101 L J BD BDC R T*** GD HD*** -20 30 108 116 -40 60 216 232 B250-Series Keyless Keyed, Single Cylinder B560P Cylinder x thumbturn B560PF Cylinder x thumbturn, fire rated 93 99 109 B561P One-way cylinder x blank plate 85 91 101 B561PF One-way cylinder x blank plate, fire rated 93 99 109 B563P Classroom cylinder outside, retraction turn inside 90 96 106 B563PF Classroom cylinder outside, retraction turn inside, fire rated 97 103 113 B500-6 Keyed, Double Cylinder B562P $114 $120 $130 Double Cylinder * ** *** Full size core furnished 1-bitted with two 6-pin keys unless otherwise specified. Not available with 0-bitted interchangeable cores. Interchangeable construction core locks assessed a one-time non-refundable handling charge (50-231) per core. Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. B600/700/800-Series Interchangeable cores available 1 5/8" - 2" doors only. Control Keys are not furnished with locks and must be ordered separately. See Keys & Keying. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. SL Cylinder with Everest B or Everest R keyways add $18.00. Ordering instructions: To change cylinder type from default 6-pin standard, change lock suffix as appropriate. Ex: B560R 626 for B560 function with FSIC in 626 finish. Price Book 8 146 Effective April 4, 2020 • Rev. 04/20 Deadbolts, Strikes, Locks Less Components, Non-Standard Door Thickness, Antimicrobial Coating Options • B500 Deadbolts Specify List Price Adjustment Description Non fire-rated locks Square corner, 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., standard deadbolt Round corner (1/4" radius), 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia. 12-290 Circular drive in deadbolt, adjustable 2 3/8" or 2 3/4" backset, 626 finish only 12-287 Triple Option - 1/4" radius round corner faceplate w/ 1" x 2 1/4" square corner and circular faceplates, adjustable 2 3/8" or 2 3/4" backset, 1" housing dia. 12-291 Square corner, 1 1/8" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset. 1" housing dia. DEADBOLT 12-288 12-289 N/C Fire-rated (UL Listed) locks 12-294 Square corner, 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., standard fire-rated (UL Listed) deadbolt N/C 12-633 Square corner, 1" x 2 1/4", 5" backset, 1" housing dia. 27.10 Ordering instructions: specify desired deadbolt on order only if requesting different from standard. Strikes List Price Adjustment Description 10-064 Circular drive-in, thimble strike, 1 3/16" dia., 626 finish only. 10-087 ANSI, box, 1 1/4" x 4 7/8", 1 3/16" lip N/C B250-Series Specify $6.40 Round corner (1/4" radius), 1 1/8" full lip, no box, 1 5/8" x 2 1/4" Square corner, no box, 1 1/8" x 2 3/4", standard 10-095 Square corner, full 1 1/8" lip, no box, 1 5/8" x 2 1/4" 10-103 Round corner (1/4"" radius), 1" x 2 1/4", no reinforcement strike provided 605, 609, 630 only 10-104 Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, no reinforcement strike provided. 605, 609, 620, 630 only 10-108 Round corner, 1 1/8" x 2 3/4", no box J250-028 2" strike reinforcement screws. 630 finish only. 37-016 Strike reinforcer, use with 10-094 or 10-108 N/C B500-7 10-092 10-094 Ordering instructions: specify desired strike on order only if requesting different from standard. Locks Less Components Specify Less deadbolt LLL for deadbolt Example: B560P 605 LLL 10-092 -$13.90 Less strike LLL for strike Example: B560P 605 12-288 LLL -5.60 Less standard cylinder (B560) L cylinder suffix Example: B560L -20.00 Less standard cylinder (B562) L cylinder suffix Example: B562L -40.00 B600/700/800-Series List Price Adjustment Description Ordering instructions: specify on order only if requesting different from standard. Non-Standard Door Thickness List Price Adjustment Specify Description Door Thickness Extended Equally (EE) for over 1 3/4" - 2 1/4" doors (except interchangable core locks) Door Thickness Extended Equally (EE) for 1 3/8" to 1 5/8" doors (for interchangable core locks) N/C $9.40 Ordering instructions: specify desired thickness on order only if requesting different from standard. EX - B560P 626 2" Antimicrobial Coating 6Extended Lead Time List Price Adjustment Specify Description Finish as 626AM Antimicrobial coating applied to inside thumbturn and rose, outside trim ring and cylinder faceplate $19.30 Ordering instructions: specify on order only if desired option. Ex: B560P 626AM Price Book 8 Effective April 4, 2020 • Rev. 04/20 147 B500 • Parts Deadbolts & Strikes, Trim Deadbolts 605 606 609 612 • DEADBOLT Available Finishes • • • 613 619 622 625 626 643e • • Part Number Description 12-288 Square corner, 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., standard deadbolt 12-289 Round corner (1/4" radius), 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia. 12-290 Circular drive in deadbolt, adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., 626 finish only 43.30 12-287 Triple Option - 1/4" radius round corner faceplate w/ 1" x 2 1/4" square corner and circular faceplates, adjustable 2 3/8" or 2 3/4" backset, 1" housing dia. 43.00 12-291 Square corner, 1 1/8" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia. 43.30 12-633 Square corner, 1 1/8" x 2 1/4", 5" backset, 1" housing dia. 95.60 39-030 Rabbeted deadbolt and strike kit, adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations, 605 and 626 only 59.80 • • • • Price Each $37.10 B250-Series Ordering Instructions: Specify part number and finish. Strikes 605 606 609 612 • B600/700/800-Series B500-8 Available Finishes • • • 613 619 622 625 626 643e • • Part Number Description 10-064 Circular drive-in, thimble strike, 1 3/16" diameter, 626 finish only 17.20 10-087 ANSI, box, 1 1/4" x 4 7/8", 1 3/16" lip 23.60 10-092 Round corner (1/4" radius), 1 1/8" full lip, no box, 1 5/8" x 2 1/4" 7.90 10-094 Square corner, no box, 1 1/8" x 2 3/4", standard 12.20 10-095 Square corner, full 1 1/8" lip, no box, 1 5/8" x 2 1/4" 7.90 10-103 Round corner (1/4" radius), 1" x 2 1/4", no reinforcement strike provided (Available 605, 609, 630 only) 2.00 10-104 Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, no reinforcement strike provided. 605,609, 620, 630 only 2.40 10-108 Round corner, 1 1/8" x 2 3/4", no box 18.10 10-112 Metal dust box and 3 screws, use with 10-094 and 10-108. Finish not applicable 12.10 37-016 Strike reinforcer, use with 10-094 and 10-108. Finish not applicable 16.20 • • • • Price Each Ordering Instructions: Specify part number and finish if applicable B302-041 B600-018 12-626 B302-045 Trim 605 606 609 612 • Available Finishes Part Number • • • 613 • • Description Price Each B302-041 Rose and turn $45.80 B600-018 Mounting plate for rose and turn. Finish not applicable 12-626 Blank rose, exposed screws 26.10 38-034 Blank mounting plate kit for use on one side of B580 99.60 B302-045 Classroom rose and turn 45.80 10.60 Ordering Instructions: Specify part number and finish if applicable. Price Book 8 148 619 622 625 626 643e Effective April 4, 2020 • Rev. 04/20 • • • • Parts • B500 Adapters , Door Reinforcements, Occupancy Indicator Emergency Key 38-031 B520-649 B520-650 605 606 609 612 • Available Finishes • • • 613 • 619 622 625 626 643e • Part Number Description 38-031 2 1/2" diameter adapter ring for 2 1/8" door prep, mounted under cylinder $19.60 B520-649 Trim ring w/ shield for B560/B562 24.20 B520-650 Trim ring w/ shield for Interchangeable Core functions A501-878 Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation • • • DEADBOLT Accessories and Adapters • Price Each 24.20 0.76 (order in multiples of 100) Ordering Instructions: Specify part number and finish if applicable. B250-Series A501-566 B500-9 Door Reinforcements Part Number Description A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings (2 required per lock) Price Each A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings (2 required per lock) 37-016 Door frame strike reinforcer $19.80 B600/700/800-Series 16.20 Ordering Instructions: Specify part number. Occupancy Indicator Emergency Key Part Number Description 61-509 Emergency release key, standard size, for B571 occupancy indicator deadbolt. Includes one key, ring, and instruction tag Price Each $11.30 61-510 Emergency release key, large size, for B571 occupancy indicator deadbolt. Includes one key, ring, and instruction tag 21.60 Ordering Instructions: Specify part number. Price Book 8 Effective April 4, 2020 • Rev. 04/20 149 B500 • Parts Individual Screws Individual Screws 605 606 609 612 DEADBOLT Available Finishes • Description Part Specify Number Finish Size Application Type Use with: • • • 613 619 • • • Door Thickness $2.50 6-32 x 1/4" PH mach. Turn — B600-048 8-32 x 1/2" PH mach. Mounting plate — 1.00 F506-359 8 x 3/4" RH wood Mounting plate — 0.48 POH mach. Mounting 1 3/8" - 1 3/4" over 1 3/4" - 2 1/4" Keyed, Single Cylinder, B560P, B563P B600-100 1/4"-28 x 1 15/16" B600-101 B600-066 • B520-298 1/4"-28 x 2 1/2" POH mach. Mounting 6-32 x 1/4" PH mach. Turn — 10-32 x 3/8" PH mach. Anti-pry shield — 2.50 0.80 Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R B250-Series B600-100 B600-066 • 1/4"-28 x 1 15/16" POH mach. Mounting 6-32 x 1/4" PH mach. Turn 1 3/8" - 2 1/4" — $2.50 Keyed, Double Cylinder, B562P B600-047 1/4"-28 x 3 13/64" PH mach. Mounting 1 3/8" - 1 3/4" B600-078 1/4"-28 x 3 29/64" PH mach. Mounting over 1 3/4" - 2 1/4" $2.50 B520-298 10-32 x 3/8" PH mach. Anti-pry shield — 0.80 1 3/8" - 2" $2.50 — 0.80 B500-10 Keyed, Double Cylinder, B562GD, B562R B600-053 1/4"-28 x 2 61/64" PH mach. Mounting B520-298 10-32 x 3/8" PH mach. Anti-pry shield B520-662 10-32 x 1 1/8" POH mach. Mounting 1 3/8" - 1 3/4" B520-663 10-32 x 1 3/4" POH mach. Mounting over 1 3/4" - 2 1/4" 6-32 x 1/4" PH mach. Turn — 8 x 3/4" PFH combo Deadbolt and strike screw — J250-028 8 x 2" PFH wood 2˝ strike screw — R525-256 12 x 3" PFH wood 3˝ Metal dust box screw — Keyless, B571, B581 B600-066 • $2.50 All Functions B600/700/800-Series C603-897 • Ordering instructions: specify part number and finish if applicable. Order in multiple quantities of 100. Price Book 8 150 • Price Each (Order in multiples of 100) Keyless, B580 B600-066 622 625 626 643e Effective April 4, 2020 • Rev. 04/20 $0.92 2.10 2.10 • • • Parts • B500 Individual Screw Packs, Cylinders Individual Screw Packs 605 606 609 612 Available Finishes Part Number Door Thickness • • • • 613 619 • • Price Each (2) B600-048 (2) F605-359 (4) C603-897 (1) B600-018 (2) B600-066 $18.30 • • • • DEADBOLT Contents 622 625 626 643e Keyless, B580 61-506 1 3/8" – 2 1/4" Keyed, Single Cylinder, B560P, B563P 61-500 1 3/8" – 1 3/4" (1) B600-018 (2) B600-100 (2) B600-066 (4) C603-897 61-501 over 1 3/4" – 2 1/4" (1) B600-018 (2) B600-101 (2) B600-066 (4) C603-897 $15.00 Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R 61-500 1 3/8" – 2" $15.00 (1) B600-018 (2) B600-100 (2) B600-066 (4) C603-897 Keyed, Double Cylinder, B562P 61-502 1 3/8" – 1 3/4" (2) B600-047 (4) C603-897 61-503 over 1 3/4" – 2 1/4" (2) B600-078 (4) C603-897 $11.40 Keyed, Double Cylinder, B562GD, B562R 1 3/8" – 2" $11.40 (2) B600-053 (4) C603-897 B250-Series 61-507 Keyless, B581, B571 61-504 1 3/8" – 1 3/4" (2) B520-662 (4) C603-897 (2) B600-066 (1) B600-018 61-505 over 1 3/4" – 2 1/4" (2) B520-663 (4) C603-897 (2) B600-066 (1) B600-018 $23.80 Ordering instructions: specify part number and finish. B500 Series Cylinders - Single Cylinder Deadbolts Price Each Standard Door Thickness 1 3/8" - 1 3/4" 22-004 Standard 1 3/4" - 2 1/4" 20-188 Primus 1 3/8" – 1 7/8" 20-188-XP Primus XP 1 3/8" – 1 7/8" 20-189 Primus 1 7/8" – 2 1/4" 20-189-XP Primus XP 1 7/8" – 2 1/4" 20-190 Primus UL 1 3/8" – 1 7/8" 20-190-XP Primus XP UL 1 3/8" – 1 7/8" 20-191 Primus UL 1 7/8" – 2 1/4" 20-191-XP Primus XP UL 1 7/8" – 2 1/4" Open Restricted $65.00 $83.00 145.00 B600/700/800-Series Description 22-003 179.00 B500 Series Cylinders - Double Cylinder Deadbolts* Price Each Part Number Description 22-645 Standard Door Thickness 1 3/8" - 1 3/4" 22-646 Standard 1 3/4" - 2 1/4" 20-745 Primus 1 3/8" – 1 7/8" 20-745-XP Primus XP 1 3/8" – 1 7/8" 20-746 Primus 1 7/8" – 2 1/4" 20-746-XP Primus XP 1 7/8" – 2 1/4" 20-545 Primus UL 1 3/8" – 1 7/8" 20-545-XP Primus XP UL 1 3/8" – 1 7/8" 20-546 Primus UL 1 7/8" – 2 1/4" 20-546-XP Primus XP UL 1 7/8" – 2 1/4" Open Restricted $65.00 $83.00 145.00 179.00 * Part numbers for double sided cylinders represent one cylinder only. Price Book 8 Effective April 4, 2020 • Rev. 04/20 B500-11 Part Number 151 B500 B600/700/800-Series B500-12 B250-Series DEADBOLT Notes Price Book 8 152 Effective April 4, 2020 • Rev. 04/20 B600/700/800 Series Grade 1 Deadbolt B600/700/800-Series Exploded View - B660P DEADBOLT Thumbturn mounting screws Inside thumbturn Mounting screws Wood frame reinforcer With #12 x 3" wood screws, standard for all B-Series deadbolts Hardened steel ball bearings Mounting plate Security shield B250-Series 7/8" Trim ring 6-Pin cylinder Outside cylinder housing Box B500-Series Strike Deadbolt 1" Throw Cylinder retaining screw B600-1 Door Preparation Price Book 8 Effective April 4, 2020 • Rev. 04/20 153 B600/700/800 Series Ordering Procedures DEADBOLT To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 Product 10 B660P DES FIN Inside DES 626 FIN Hand 613 Latch Strike Dr Thk Ext 12-630 10-094 214 EE Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: DIM Additional Details KA B500-Series B250-Series Line item number Quantity Product function + cylinder code Outside lever design, not applicable for deadbolts. Leave blank Outside finish Inside lever design, not applicable for deadbolts. Leave blank Inside finish, specify only if different from the outside finish Hand of door, not applicable for deadbolts. Leave blank Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike Door thickness, leave blank for standard thickness or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4" Extension, enter one of the following when door thicknesses 2" or greater are specified: EE = Extended Equally, EI = Extended Inside, EO = Extended Outside Dim: Dimension for non-standard strike lip length, not applicable for the B6/7/8. Leave blank Additional Details: Enter additional detail for keying information or special requirements B600-2 Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified with “C” keyway and KD or 0-bitted will receive 6 pin cylinders. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $17.40 per cylinder. 17. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 154 Effective April 4, 2020 • Rev. 04/20 Introduction B600/700/800 Product Identification Table of Contents 60 P X Screw Suffix X = Torx® screws Cylinder Suffix P = Conventional, 6 Pin/Keyed 5 P6 = Conventional, 6 pin R = FSIC J = Less FSIC M = SL - FSIC T = FSIC - Construction Core B = Less SFIC BDC = Disposable Construction SFIC G7 = SFIC (7 pin) H = Refundable Construction SFIC Conventional Cylinder, Z = SL 7 pin Function B500-Series Lock Series B6 = Standard pinning B7 = Primus® Controlled Access B8 = Primus High Security SFIC = Small Format (Best® Style) Interchangeable Core Finish Codes and Descriptions Description Bright Brass Satin Brass Satin Brass, Blackened Satin Bronze Oil Rubbed Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chromium Plated Antimicrobial Coating on Satin Chromium Aged Bronze B600-3 Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US 10) 613 (US 10B) 619 (US 15) 622 (US 19) 625 (US 26) 626 (US26D) 626AM 643e (US11) Standard Features Locks are furnished with standard features unless otherwise specified. Certification Deadbolt Strike Backset Door Range Reinforcement Trim Rings Cylinder Keys ANSI/BHMA Certified A156.36-2010, Grade 1 auxiliary lock. With FSIC Interchangeable Core Cylinders: Grade 2 With SFIC Interchangeable Core Cylinders: Grade 3 UL Listed for 3-hour fire door, B800-Series is UL437 listed. 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throw 1 1/8" x 2 3/4", Square corner, box 2 3/4" 1 5/8" - 2" standard cylinder or FSIC; 1 3/4" - 2" SFIC; 1 3/8" - 2 1/2" door bolt only Metal dust box reinforcer with two 3" screws 7/8" Solid brass or bronze 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) Two nickel silver cut keys per lock, 6-pin, S123 section Price Book 8 Effective April 4, 2020 • Rev. 04/20 B250-Series BAA/ARRA Contact your local RSO or Sales Rep. for ordering details B6 DEADBOLT Functions B600-4 B600-5 Complete Locks Options B600-7 Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-7 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-7 Locks Less Components. . . . . . . . . . . . . . . . . . . . B600-7 Non-Standard Door Thickness . . . . . . . . . . . . . B600-7 Antimicrobial Coating. . . . . . . . . . . . . . . . . . . . . . B600-7 Tamper Resistant Torx Screws. . . . . . . . . . . . . .B600-7 B600-8 Parts Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-8 Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-8 Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-9 Door Reinforcements . . . . . . . . . . . . . . . . . . . . . . B600-9 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-10 Screw and Ball Bearing Packs. . . . . . . . . . . . . B600-10 Torx Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . B600-11 Special Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-11 Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B600-12 See Cylinders Section Complete Cylinders How To Order Forms & Examples 155 B600/700/800 • Functions ANSI/BHMA Certified A156.36-2010, Grade 1 auxiliary lock. UL Listed for 3-hour fire door, B800-Series is UL437 listed. B600-4 B500-Series B250-Series DEADBOLT Bored Deadbolt Locks SCHLAGE ANSI B660P B760P B860P E0151 Single Cylinder Deadbolt Lock Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown. B661P B761P B861P E0161 One-Way Deadbolt Lock Deadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown. B662P B762P B862P E0141 Double Cylinder Deadbolt Lock* Deadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown. B663P B763P B863P E0171 Classroom Deadbolt Lock Deadbolt thrown or retracted by key outside. Inside turn unit will retract bolt only. Bolt automatically deadlocks when fully thrown. B664P B764P B864P E0101 Cylinder Lock Deadbolt thrown or retracted by key from one side. No inside trim. Bolt automatically deadlocks when fully thrown. Requires 1 1/2" cross bore only. B680 E0191 Door Bolt Deadbolt thrown or retracted by turn unit only. No outside trim. Bolt automatically deadlocks when fully thrown. Requires 1 1/2" cross bore only. Door range is 1 3/8" - 2 1/2". * Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Price Book 8 156 Effective April 4, 2020 • Rev. 04/20 Complete Locks • B600/700/800 Inside Cylinder Trim Primus® Controlled Access Cylinder Trim Primus® High Security Cylinder Trim Rose and Turn DEADBOLT Outside Cylinder Trim UL B250-Series Latches 12-631 Standard 12-641 12-297 12-317 B500-Series Strikes 10-064 10-087 10-092 10-095 B600-5 10-094 Standard Price Book 8 Effective April 4, 2020 • Rev. 04/20 157 B600/700/800 • Complete Locks Cylinder Adjustments J = Less FSIC R* = FSIC (Full Size Interchangable Core) T** =FSIC Construction Core BD = Less SFIC BDC = SFIC Construction Core (disposable) GD = Everest 29 Patented SFIC HD ** = SFIC Construction Core (refundable) Finishes DEADBOLT 605 606 609 612 619 622 625 Function Description 626 643e 613 J R T** BD BDC GD HD** B600 Series Keyless B680 $164 $170 $180 No trim x thumbturn B250-Series Keyed, Single Cylinder B660P Cylinder x thumbturn B661P One-way cylinder x blank plate B663P Classroom cylinder outside, retraction turn inside 218 224 234 B664P Cylinder x no trim 210 216 226 $210 $216 $226 -36 39 N/C +87 +45 -72 +78 N/C +174 +90 Keyed, Double Cylinder B662P $269 $275 $285 Double Cylinder B700 SERIES: Primus Controlled Access Cylinder ® B500-Series Keyed, Single Cylinder B760P Cylinder x thumbturn B761P One-way cylinder x blank plate B763P Classroom cylinder outside, retraction turn inside 301 307 317 B764P Cylinder x no trim 289 295 305 423 429 439 $289 $295 $305 +39 Keyed, Double Cylinder B762P Double Cylinder +78 B800 SERIES: Primus High Security Controlled Access Cylinder ® B600-6 Keyed, Single Cylinder B860P Cylinder x thumbturn B861P One-way cylinder x blank plate B863P Classroom cylinder outside, retraction turn inside 335 341 351 B864P Cylinder x no trim 316 322 332 $316 $322 $332 Keyed, Double Cylinder B862P $445 $451 $461 Double Cylinder Notes B600, 700, 800 not available less standard cylinder. Control Keys are not furnished with locks and must be ordered separately. See Keys & Keying. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. SL Cylinder with Everest B or Everest R keyways add $18.00. * ** B600R Full Size Core locks furnished 1-bitted with two 6-pin keys unless otherwise specified. Not available with 0-bitted interchangeable cores B700R Full Size Core locks furnished 0-bitted with two 6-pin keys entered as separate line item. Non-disposable construction core locks assessed a one-time non-refundable handling charge (50-231) of $10.70 per core. Ordering instructions: To change cylinder type from default 6-pin standard, change lock suffix as appropriate. Ex: B660R 626 for B660 function with FSIC in 626 finish. Price Book 8 158 Effective April 4, 2020 • Rev. 04/20 Deadbolts, Strikes, Locks Less Components, Non-Standard Door Thickness, Antimicrobial Coating , Tamper Resistant Torx Screws Options • B600/700/800 Deadbolts Description 2 3/8" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia. 2 3/8" backset, circular, drive-in, 1 1/16" housing dia., 626 only 2 3/4" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia., standard deadbolt 2 3/4" backset, circular, drive-in, 1 1/16" housing dia., 626 only 3 3/4" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia. 3 3/4" backset, circular, drive-in, 1 1/16" housing dia., 626 only 5" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia. 5" backset, circular, drive-in, 1 1/16" housing dia., 626 only Adjustable 2 3/8" or 2 3/4" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia. Adjustable 2 3/8" or 2 3/4" backset, Circular, drive-in, 1" housing dia., 626 only List Price Adjustments N/C DEADBOLT Specify 12-630 12-640 12-631 12-641 12-632 12-642 12-633 12-643 12-297 12-317 $28.90 N/C Ordering instructions: specify desired deadbolt on order only if requesting different from standard. Strikes Description Square corner, no box, 1 1/8" x 2 3/4", standard Circular drive-in, thimble strike, 1 3/16" diameter, 626 finish only ANSI, 1 1/4" x 4 7/8", 1 3/16" lip length, box Round corner (1/4" radius), 1 5/8" x 2 1/4", 1 1/8" full lip, no box Square corner, 1 5/8" x 2 1/4", 1 1/8" full lip, no box Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, 605, 609, 620, 630 finishes only Round corner (1/4" radius), 1" x 2 1/4", 605, 609, 630 finishes only Strike reinforcer, use with 10-094 2" strike reinforcement screws. 630 finish only. List Price Adjustments B250-Series Specify 10-094 10-064 10-087 10-092 10-095 10-104 10-103 37-016 J250-028 N/C Ordering instructions: specify desired strike on order only if requesting different from standard. Description Less deadbolt Less strike List Price Adjustment Specify LLL for deadbolt Example: B660P 605 LLL 10-064 LLL for strike Example: B660P 605 12-630 LLL -19.50 -6.10 -17.40 LKB N/A Not available B600, B700, B800 B600-7 Less key blanks, B700 and B800 only Less Cylinder B500-Series Locks Less Components Ordering instructions: specify on order only if requesting different from standard. Non-Standard Door Thickness Specify 1 3/8" Door Thickness Door Thickness List Price Adjustments Description 1 3/8" door thickness. Not available for interchangeable core locks. Extended Equally (EE), over 2"-2 1/2" thick doors (not available SFIC; see Special Parts for SFIC conversion kits) $10.30 N/C Note: For doors over 2 1/2" - 4" thick, see Special Parts for conversion kits. Ordering instructions: specify desired thickness on order only if requesting different from standard. EX: B660P 626 1 3/8" Antimicrobial Coating Specify Finish as 626AM 6Extended Lead Time Description Antimicrobial coating applied to inside thumbturn and rose, outside trim ring and cylinder faceplate List Price Adjustments $19.20 Ordering instructions: specify on order only if desired option. Ex: B560P 626AM. Tamper Resistant Torx® Screws Specify X suffix Description Torx latch, strike, and mounting screws. Not available SFIC locks. List Price Adjustments $21.90 Ordering instructions: Add X suffix to lock. Ex: B660PX. Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 159 B600/700/800 • Parts B500-Series B250-Series DEADBOLT 12-297 12-317 Deadbolts, Strikes 12-631 12-641 Deadbolts 605 606 609 612 • Available Finishes Part Number • • • Description 613 619 • • 622 625 626 643e • • • • Price Each Complete Deadbolts Square corner, adjustable 2 3/8" or 2 3/4" backset, 1 1/8" x 2 1/4", 12-297 1" housing dia. Circular, drive-in, adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., 12-317 626 only 12-630 Square corner, 2 3/8" backset, 1 1/8" x 2 1/4", 1" housing dia. 12-640 Circular, drive-in, 2 3/8" backset, 1 1/16" housing dia., 626 only Square corner, 2 3/4" backset, 1 1/8" x 2 1/4", 1" housing dia., standard 12-631 deadbolt 12-641 Circular, drive-in, 2 3/4" backset, 1 1/16" housing dia., 626 only 12-632 Square corner, 3 3/4" backset, 1 1/8" x 2 1/4", 1" housing dia. 12-642 Circular, drive-in, 3 3/4" backset, 1 1/16" housing dia., 626 only 12-633 Square corner, 5" backset, 1 1/8" x 2 1/4", 1" housing dia 12-643 Circular, drive-in, 5" backset, 1 1/16" housing dia., 626 only Rabbeted deadbolt and strike kit (adapts square corner latches and 2 3/4" 39-030 high square coner strikes to 1/2" rabbeted door and frame preparations). 605 and 626 finish only. Deadbolts Less Faceplates 12-650 2 3/8" backset deadbolt unit less faceplate, 1" housing dia. 12-651 2 3/4" backset deadbolt unit less faceplate, 1" housing dia. 12-652 3 3/4" backset deadbolt unit less faceplate, 1" housing dia. 12-653 5" backset deadbolt unit less faceplate, 1" housing dia. Faceplate kits 12-627 Square corner faceplate, 1 1/8" x 2 1/4", includes backplate and screws 12-628 Circular drive-in faceplate and collar, 626 finish only $61.50 54.60 95.60 59.80 42.60 84.30 10.90 Ordering Instructions: Specify part number and finish. B600-8 10-094 Standard 10-064 10-087 10-092 10-095 Strikes 605 606 609 612 • Available Finishes Part Number 10-064 10-087 10-092 10-094 10-095 10-103 10-104 10-112 37-016 K510-066 Description Circular drive-in, thimble strike, 1 3/16" diameter, 626 finish only ANSI, box, 1 1/4" x 4 7/8", 1 3/16" lip Round corner (1/4" radius), 1 1/8" full lip, no box, 1 5/8" x 2 1/4" Square corner, no box, 1 1/8" x 2 3/4", standard Square corner, full 1 1/8" lip, no box, 1 5/8" x 2 1/4" Round corner (1/4" radius), 1" x 2 1/4", no reinforcement strike provided (Available 605, 609, 630 only) Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, no reinforcement strike provided. 605,609, 620, 630 only Metal dust box and 3 screws, use with 10-094 and 10-108. Finish not applicable. Strike reinforcer, use with 10-094 and 10-108. Finish not applicable. Plastic dust box for ANSI strike. Finish not applicable. Ordering Instructions: Specify part number and finish if applicable. Price Book 8 160 Effective April 4, 2020 • Rev. 04/20 • • • 613 619 • • Price Each $17.20 23.60 7.90 12.20 7.90 2.00 2.40 12.10 16.20 7.00 622 625 626 643e • • • • Parts • B600/700/800 Trim, Door Reinforcements 12-617 B600-017 605 606 609 • Available Finishes Description Rose and turn Rose and turn, classroom function Classroom driver kit. Finish not applicable Blank inside rose, exposed screws, B661 Blank mounting plate kit for use on one side of B664 or B680 Security shield, 2 1/8" door preparation. Finish not applicable Mounting plate, turn. Finish not applicable Support (anchor) and mounting screws, B664. Finish not applicable • 612 613 619 622 • • • • 625 626 643e • • • Price Each $48.80 54.40 10.80 26.10 99.60 10.80 10.60 28.20 B250-Series Part Number 12-617 12-618 12-625 12-626 38-034 B600-017 B600-018 B610-035 • DEADBOLT Trim Ordering Instructions: Specify part number and finish if applicable. A501-566 B500-Series Door Reinforcements Description A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings (2 required per lock) Price Each A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors, fits both 7/8" and 1" diameter housings (2 required per lock) 37-016 Door frame strike reinforcer $20.40 B600-9 Part Number 16.20 Ordering Instructions: Specify part number. Price Book 8 Effective April 4, 2020 • Rev. 04/20 161 B600/700/800 • Parts Screws, Screw and Ball Bearing Packs Screws DEADBOLT 605 606 609 612 Available Finishes Description Size Type Part Number Specify Finish C603-256 • 12-24 x 1" C603-897 • 8 x 3/4" PFH combo • • • • 613 619 • • • • • Application ANSI strike $1.00 Deadbolt and strike 0.92 Screw and Ball Bearing Packs Part Number Specify Finish • Available Finishes Door Thickness Contents • • • 613 619 • • Price Each Keyless B610-066 • $8.70 Rose trim, B680 (2) Mounting screws B610-049 1 3/8" – 2 1/2", B664 2) Mounting screws B610-050 1 3/8" – 2", B660, 661, 663 20.20 over 2" – 2 1/2", B660, 661, 663 (2) Mounting screws (2) Ball bearings Rose trim, B660, 661, 663 (2) Mounting screws 8.70 (2) Mounting screws (2) Ball bearings 20.20 (2) Mounting screws (2) Ball bearings 20.20 Keyed, Single Cylinder B250-Series • Price Each (Order in multiples of 100) 605 606 609 612 B610-051 B610-066 • Keyed, Double Cylinder (except Interchangeable Core) B610-053 1 3/8" – 2", B662P B610-055 over 2" – 2 1/2", B662P Keyed, Double Cylinder, Interchangeable Core B610-054 1 5/8" – 2", B662R B610-056 over 2" – 2 1/2", B662R Note Above screw packs are also used for B700 and B800 series locks. B600-10 B500-Series 622 625 626 643e Price Book 8 162 Effective April 4, 2020 • Rev. 04/20 622 625 626 643e • • • • Parts • B600/700/800 Torx Screw Packs, Special Parts Torx Screw Packs 605 606 609 Specify Finish B610-066 • • • 612 613 619 622 • • • • Contents 625 626 643e • • • Price Each Rose trim, B680 (2) Mounting screws (T-20) $10.00 1 3/8" – 2 1/2", B664 2) Mounting screws (T-30) 21.40 Rose trim, B660, 661, 663 (2) Mounting screws (T-10) 10.00 DEADBOLT Part Number Keyless • Available Finishes Door Thickness Keyed, Single Cylinder B610-059 B610-065 • Keyed, Double Cylinder (except Interchangeable Core) B610-061 1 3/8" – 2", B662P B610-063 over 2" – 2 1/2", B662P (2) Mounting screws (T-30) (2) Ball bearings 21.40 (2) Mounting screws (T-30) (2) Ball bearings 21.40 (4)C503-766 (1) T-15 size Torx Bit 8-32 x 1/2" (2)C503-766 (1) T-15 size Torx Bit 8-32 x 1/2" (2)L583-371 (1) T-20 size Torx Bit 12-24 x 1/2" 21.90 Keyed, Double Cylinder, Interchangeable Core B610-062 1 5/8" – 2", B662R B610-064 over 2" – 2 1/2", B662R All Functions • Deadbolt and strike C203-312 • Deadbolt and ANSI strike Notes B250-Series C203-311 Torx screw packs are furnished with appropriate T-xx installation tool(s). Above screw packs are also used for B700 and B800-Series locks. B500-Series Special Parts 6 Extended Factory Lead Time Part Number Door Range Function 2"-4" B660P, B663P XB11-917 2"-3" B662P XB11-918 2"-4" B760P, B763P B860P, B863P XB11-919 2"-3" B762P, B862P XB11-920 2"-4" B660R, B660J, B660T, B663R, B663J, B663T, B760R, B763R XB11-921 2"-4" B662R, B662J, B662T, B762R 108.00 Screw and tailpiece conversion kit for B600/ 700/800-Series Locks to fit doors Extended Equally (EE), over 2" - 4" thick. Specify door thickness. 173.00 173.00 108.00 108.00 B660BD, B660GD, B660HD, B663BD, B663GD, B663HD Screw and tailpiece conversion kit for B600-Series locks to fit doors Extended Equally (EE), over 2" - 4" thick. Specify door thickness. 108.00 For door thickness and locks not listed above, please use the Innovation Center (RFQ) request form Ordering instructions: Specify part number and desired door thickness, EX: XB11-916 3". Price Book 8 Effective April 4, 2020 • Rev. 04/20 163 B600-11 Notes:: 2"-4" Price Each $173.00 XB11-916 XB11-922 Description B600/700/800 Cylinders B600/700-Series Cylinder Reference Table DEADBOLT Cylinder Mechanism B600-Series Standard B600-Series SL (R/B Keyways only) B600-Series Standard B600-Series SL (R/B Keyways only) B600-Series Standard B600-Series SL (R/B Keyways only) B600-Series Standard B600-Series SL (R/B Keyways only) B600-Series Standard B600-Series SL (R/B Keyways only) B700-Series Primus Function B660, B663 B660, B663 B661, B664 B661, B664 B661, B664 B661, B664 B662 B662 B662 B662 B760, B763 B761, B764 B762 B500-Series B250-Series B760-XP, B763-XP B760-XP, B763-XP (R/B Keyways only) B761-XP, B764-XP B700-Series Primus XP B761-XP, B764-XP (R/B Keyways only) B761-XP, B764-XP B761-XP, B764-XP (R/B Keyways only) B762-XP B700-Series SL Primus XP (R/B Keyways only) B762-XP B700-Series Primus XP B762-XP B700-Series SL Primus XP (R/B Keyways only) B762-XP Door Thickness 1 3/8" – 2 1/2" 1 3/8" – 2 1/2" 1 3/8" – 2" 1 3/8" – 2" 2" – 2 1/2" 2" – 2 1/2" 1 3/8" – 2" 1 3/8" – 2" 2" – 2 1/2" 2" – 2 1/2" 1 3/8" – 2 1/2" 1 3/8" – 2" 2" – 2 1/2" 1 3/8" – 2" 2" – 2 1/2" 1 3/8" – 2 1/2" 1 3/8" – 2 1/2" 1 3/8" – 2" 1 3/8" – 2" 2" – 2 1/2" 2" – 2 1/2" 1 3/8" – 2" 1 3/8" – 2" 2" – 2 1/2" 2" – 2 1/2" Cylinder Less Housing 22-644 91-032 22-642 91-030 22-643 91-031 22-085 91-028 22-086 91-029 20-744 20-742 20-743 20-745 20-746 20-744-XP 91-711-XP 20-742-XP 91-709-XP 20-743-XP 91-710-XP 20-745-XP 91-712-XP 20-746-XP 91-713-XP Price Each Open Restricted $65.00 Door Thickness 1 3/8" – 2 1/2" 1 3/8" – 2" 2" – 2 1/2" 1 3/8" – 2" 2" – 2 1/2" 1 3/8" – 2 1/2" 1 3/8" – 2" 2" – 2 1/2" 1 3/8" – 2" 2" – 2 1/2 1 3/8" - 2 1/2" 1 3/8" - 2" 2" - 2 1/2" 1 3/8" - 2" 2" - 2 1/2" Cylinder Less Housing 20-544 20-542 20-543 20-545 20-546 20-544-XP 20-542-XP 20-543-XP 20-545-XP 20-546-XP 91-536-XP 91-534-XP 91-535-XP 91-532-XP 91-533-XP Price Each Open Restricted 65.00 65.00 $83.00 65.00 65.00 141.00 145.00 145.00 145.00 145.00 145.00 145.00 145.00 145.00 145.00 B800-Series Cylinder Reference Table Cylinder Mechanism Function B860, B863 B800-Series Primus UL437 B861, B864 B600-12 B862 B860-XP, B863-XP B800-Series Primus-XP UL437 B861-XP, B864-XP B862-XP B860,B863 B800-Series Everest SL Primus-XP B861, B864 B862-XP(UL) Price Book 8 164 Effective April 4, 2020 • Rev. 04/20 $179.00 $179.00 L-Series GRADE 1 MORTISE LEVERED LOCK L9000-Series M ORTISE Exploded View - L9050P Inside lever and bushing Inside rose Mounting screws Thumbturn mounting screws Thumbturn Spring cage Lock case Spindle and spring Compression ring L-1 Mounting plate Compression ring spring Armor front 6-Pin full face mortise cylinder Armor screws Strike screws Strike Strike box Outside lever and rose Mounting posts Lock case mounting screws Spring cage Spindle and spring Door Preparation Indicates products that have EPD documentation available and meet LEED v4. Price Book 8 Effective April 4, 2020 • Rev. 04/20 165 L-Series Ordering Procedures MORTISE To order Schlage products, descriptive data should be in the sequence as shown below. Outside Line Item Qty 1 Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details L9050P 12A 626 06B 613 RH 09-669 10-072 2 EE 134 KA 10 Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: L-2 Inside Dim: Line item number Quantity Product function + cylinder code Outside lever design + rose/escutcheon code Outside finish Inside lever design + rose/escutcheon code, specify only if different from the outside lever design Inside lever finish, specify only if different from the outside finish Handing may be specified for any order but is required for handed lever designs and LM300 functions. If handing is not specified, the order will default to RH. Product armor front, leave blank for standard armor or specify part number if non-standard armor is required. LLL = less armor front Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike Door thickness, leave blank for standard thickness (1 3/4") or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4" Extension, enter one of the following when door thicknesses 2" or greater are specified: EE = Extended Equally, EI = Extended Inside, EO = Extended Outside Dimension; for locks enter only for non-standard strike lip length, for parts enter for non-standard strike lip length, mortise cylinder or blocking ring length Additional Details: Enter additional detail for keying information or special requirements Note: For lock functions requiring a thumbturn, all orders will ship with the new ADA Thumbturn. If a different thumbturn is required, please specify on the order. Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 166 Effective April 4, 2020 • Rev. 04/20 Introduction L L/LV 9 4 53 P BAA/ARRA Contact your local RSO or Sales Rep. for ordering details Cylinder Suffix P = Conventional, 6 Pin/Keyed 5 P6 = Conventional, 6 pin L Less Conventional , 6 Pin C Concealed Mortise Cylinder Concealed Mortise W Less Cylinder R = FSIC with Schlage Logo J = Less FSIC M = SL - Everest 29 SL FSIC F = FSIC without Logo T = FSIC - Construction Core B = Less SFIC BDC = Disposable Construction SFIC G7 = SFIC (7 pin) H = Refundable Construction SFIC Z = SL Conventional Cylinder, 7 pin Function 0 = No Deadbolt 1 = Dummy Trim 4 = With Deadbolt 0 = Dummy Trim without Lock Case 9 = Functions with Lock Case Lock Series Prefix L = Standard LV = Vandlgard SFIC = Small Format (Best® Style) Interchangeable Core Finish Codes and Descriptions Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US 10) 613 (US 10B) 619 (US 15) 622 (US19) 625 (US 26) 626 (US 26D) 626AM 629 (US 32) 630 (US 32D) 630AM 643e (US 11) Description Bright Brass Satin Brass Antique Brass Satin Bronze Oil Rubbed Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chromium Plated Antimicrobial Coating on Satin Chromium Bright Stainless Steel Satin Stainless Steel Antimicrobial Coating on Satin Stainless Steel Aged Bronze Standard Features Certifications Case Size Armor Front Deadbolt Latchbolt Strike Backset Cylinder Door Range Keys L/LV9000: ANSI/BHMA Certified A156.13-2012, Series 1000, Grade 1 Operational, Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077). With FSIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 2 Security. With SFIC Interchangeable Core Cylinders: Grade 1 Operational, Grade 3 Security. L400: ANSI/BHMA Certified A156.36-2010, Grade 1, UL Listed for 3-hour fire door. L/LV9000: 4 7/16" x 6 1/16" x 1"; L400: 4 7/16" x 3 5/8" x 1" L/LV9000: 1 1/4" x 8"; L400: 1 1/4" x 5 9/16" 1" Throw stainless steel 3/4" Throw stainless steel with anti-friction tongue L/LV9000: 1 1/4" x 4 7/8" Square corner, 1 3/16" lip, box; L400: 1 1/8" x 3 5/8" square corner, box 2 3/4" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/4" Two nickel silver cut keys per lock, 6-pin, S123 section Price Book 8 Effective April 4, 2020 • Rev. 04/20 167 L-3 Product Identification Functions L-4 Complete Locks L-12 Standard Lever Collection A, B or C Rose Trim. . . . . . . . . . . . . . L-12 Standard Lever Collection Escutcheon Trim. . . . . . . . . . . . . . . . L-14 M Lever Collection A, B or C Rose Trim. . . . . . . . . . . . . . . . . . . . . . L-16 M Lever Collection Escutcheon Trim. . . . . . . . . . . . . . . . . . . . . . . . L-18 L-Series - Ligature Resistant Trim. . . . . . . . . . . . . . . . . . . . . . . . . L-20 Commercial Lever Suites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-22 L9000-Series Deadbolt Locks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-23 L400-Series Deadbolt Locks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-23 Options L-24 Cylinder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-24 Armor Fronts and Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-25 Locks Less Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-26 Locks Less Lock Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-26 Non-Standard Door Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-27 Indicators (for Sectional (rose) or N Escutcheon Trim) . . . . L-28 Tamper-resistant screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-28 Tactile Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-28 ADA Thumbturn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-28 Lever Trak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-28 Special Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-29 Antimicrobial Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-29 Lead Lining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-29 RX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-29 Distributor Pack Program L-30 Lock Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-31 Trim Packs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-32 Armor Fronts, Strikes, Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . L-33 L-34 Parts Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-34 Levers & Knobs, Roses, Escutcheons . . . . . . . . . . . . . . . . . . . . . . L-35 Outside Lever/Knob Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . L-36 Armor Fronts & Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-37 Buttons, Thumbturns, Coin Turns, Cylinder Turns. . . . . . . . . . L-38 Occupancy Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-39 Thru-Bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-40 Mounting Posts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-40 Springs & Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-40 L Lock Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-41 Electrified Lock Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-42 Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-43 Classroom Security Function Conversion Kits. . . . . . . . . . . . . . L-45 Vandlegard Retrofit kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-45 Screw Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-46 Special Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-46 Mortise Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-47 Allegion Connect Harnesses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-48 Complete Cylinders See Cylinders Section How To Order Forms & Examples M ORTISE Table of Contents L • Functions L-4 MORTISE ANSI/BHMA Certified A156.13-2012, Series 1000, Grade 1 Operational, Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077). Mortise Locks Non-Keyed Mortise Locks Non-Keyed SCHLAGE ANSI SCHLAGE L9010 F01 Passage Latch Latchbolt retracted by knob/lever from either side at all times. Inside knob/lever is always free for immediate egress. L9025 F31 Exit Lock No outside trim. Aux Latch. Inside knob/lever only always free for immediate egress. L9040 F22 LV9040 L9044 LV9044 L9440 F19 LV9440 Bath/Bedroom Privacy Lock Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn.Turning inside knob/lever or closing door unlocks outside knob/lever. To unlock from outside, remove emergency button, insert emergency thumbturn (furnished) in access hole and rotate. Inside knob/lever is always free for immediate egress. Privacy With Coin Turn Outside Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn or outside coin turn. Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever. Specify per L283-056 for Torx® screws. Available with rose and N escutcheon trim only. Privacy With Deadbolt Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/ lever. To unlock from outside, remove emergency button, insert emergency thumbturn in access hole and rotate. Inside knob/lever is always free for immediate egress. ANSI Privacy With Deadbolt and Coin Turn Outside Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn or outside coin turn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever. Specify per L283-056 for Torx screws. Available with rose and N escutcheon trim only. Inside knob/lever is always free for immediate egress. L9444 LV9444 Mortise Locks Non-Keyed Dummy SCHLAGE ANSI L0170 Half Dummy Trim Knob/lever on one side fixed by mounting bar. Not for use on wood doors, or with L escutcheon recommend L9175. L0172 Full Dummy Trim Knob/lever on both sides fixed by mounting bar. L9175 Half Dummy Trim w/ Lock Case Fixed knob/lever on one side inoperable. Includes lock case and armored front. Options same as L9176 below. L9176 Full Dummy Trim w/ Lock Case* Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL11-743 armored front with cutout to receive deadbolt. LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked. * In a double door application where the dummy will be used as the strike, order 10-091 Armored Front Strike separately. 180 degree messaging indicator available. See options section for details. Price Book 8 168 Effective April 4, 2020 • Rev. 04/20 Functions • L Mortise Locks-Keyed SCHLAGE SCHLAGE ANSI L9076 LV9076 F06 ANSI L9026 L9050 F04 LV9050 L9050 With Automatic Unlocking Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside, thumbturn or closing door. Rotating inside knob/lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. L9056 LV9056 L9060 F09 LV9060 Apartment Entrance Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from inside. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. L9070 F05 LV9070 Classroom Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key. Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. L9071 LV9071 Classroom Security Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. F32 Classroom Holdback Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/lever and turn key 360º for holdback feature. Inside lever is always free for immediate egress. L9077 LV9077 Classroom Security Holdback Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. In locked state, depress inside knob/lever and turn key 360º to engage holdback and unlock door. Inside knob/lever is always free for immediate egress. L9080 F07 LV9080 Storeroom Lock Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always inoperative. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. L9082 F30 LV9082 Institution Lock* Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Auxiliary latch deadlocks latchbolt when door is locked. L-5 Exit Lock with Cylinder No outside trim. Inside knob/lever always free for immediate egress. Outside cylinder retracts latchbolt. Auxiliary latch deadlocks latchbolt when door is locked. Available in sectional and L escutcheon trim only. Entrance/Office Lock Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/ lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked. * Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Price Book 8 Effective April 4, 2020 • Rev. 04/20 M ORTISE Mortise Locks-Keyed 169 L • Functions Mortise Locks-Keyed with Deadbolt SCHLAGE ANSI L9453 LV9453 F20 MORTISE Mortise Locks-Keyed with Deadbolt SCHLAGE ANSI Entrance/Office Lock with Deadbolt Latchbolt retracted by knob/lever from either side unless outside is locked by 20° rotation of thumbturn. Deadbolt thrown or retracted by 90° rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/ lever remains locked until thumbturn is restored to vertical position. Throwing deadbolt automatically locks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. L9466 F14 Store/Utility Room Lock* Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. L9473 F21 Dormitory/Bedroom Lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or thumbturn inside. L9480 LV9480 Storeroom Lock With Deadbolt Latchbolt retracted by key outside or by lever or knob inside. Outside knob/ lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. L9485 LV9485 Faculty Restroom Lock Latchbolt retracted by key outside or by knob/lever inside. Outside knob/ lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown, all keys become inoperative except emergency key. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress. Not available in SFIC or Everest SL. L/LV9485 with 09-611 indicator Adds 09-611 “Do Not Disturb” indicator to L/LV9485. Specify L583-375 for “Occupied”. NOTE: This is the "old style" indicator, not the 180 degree indicator available on most other functions F13 Corridor Lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside knob/lever is always free for immediate egress. L9457 LV9457 F33 Classroom Security Lock w/ Deadbolt Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/ lever. Inside knob/lever is always free for immediate egress. L9458 LV9458 F34 Classroom Security Lock w/ Deadbolt and Auxiliary Latch Latchbolt operated by lever from either side except when outside lever is lock from inside or outside by key. Deadbolt retracted by key from inside or outside. Operating inside lever retracts both bolts and unlocks outside. Auxiliary deadlatch when door is locked. Inside knob/lever is always free for immediate egress. L9486 LV9486 Closet/Storeroom Lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside. L9496 LV9496 L-6 L9456 LV9456 L9465 * Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. OCCUPIED OCCUPIED LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked. 180 degree messaging indicator available. See options section for details. Price Book 8 170 L/LV9456 with 09-611 indicator Adds 09-611 “Occupied” indicator to L/LV9456. NOTE: This is the “old style” indicator, not the 180 degree indicator available on most other functions Effective April 4, 2020 • Rev. 04/20 Functions • L ANSI/BHMA Certified A156.5-2001, Grade 1, UL Listed for 3-hour fire door. ANSI SCHLAGE ANSI L9460 F17 Cylinder x Thumbturn Lock Deadbolt thrown or retracted by key outside or thumbturn inside. L460 E06071 Cylinder x Thumbturn Lock Deadbolt thrown or retracted by key outside or thumbturn inside. E06061 F16 Double Cylinder Lock* Deadbolt operated by key from either side. L462 L9462 Double Cylinder Lock* Deadbolt operated by key from either side. L463 E06091 Classroom Lock Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt but cannot project it. L464 E06081 Cylinder Lock Deadbolt thrown or retracted by key from one side. No trim on opposite side. L9463 L9464 F29 F18 Classroom Lock Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt but cannot project it. Cylinder Lock Deadbolt thrown or retracted by key from one side. No trim on opposite side. L480 Door Bolt Deadbolt thrown or retracted by thumbturn from one side. No trim on opposite side. L496 Deadbolt With “OCCUPIED” Indicator Deadbolt thrown or retracted by key outside or thumbturn inside. When deadbolt is thrown “OCCUPIED” plate is displayed. LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked. OCCUPIED * L-7 Mortise Locks-Small Case Deadbolts SCHLAGE M ORTISE Mortise Locks-Keyed with Deadbolt Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 180 degree messaging indicator available. See options section for details. Price Book 8 Effective April 4, 2020 • Rev. 04/20 171 L • Functions Special Functions Special Functions SCHLAGE SCHLAGE Double Dummy With Active Trim Knob/lever both sides always active. Includes lock case and armor front. Specify per XL11-741. May be ordered with optional XL11-743 armor front with cutout to receive deadbolt only. L9482 x XL11-543 LV9482 Institution Lock With Deadbolt* Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Deadbolt thrown or retraced by key either side. Auxiliary latch deadlocks latchbolt when door is locked. Specify per XL11-543. L9040 x XL11-446 LV9040 Privacy With Turns Both Sides Latchbolt retracted by knob/lever from either side unless outside is locked by inside or outside thumbturn. Operating inside knob/ lever, closing door or rotating either thumbturn unlocks outside knob/ lever. Specify per XL11-446. L9485 x XL11-557 L9066 x XL11-897 Storeroom Lock* Key in either cylinder locks or unlocks both levers. When locked, latchbolt retracted by key either side. Specify per XL11-897. Prison Function Lock Latch retracted by key outside or knob inside. Outside knob always free spinning. Deadbolt only thrown or retracted by guard’s key. Inside knob becomes fixed when deadbolt is thrown. Auxiliary latch deadlocks latchbolt when door is locked. Prisoner’s key only retracts latchbolt. Furnished standard with tamper resistant Torx® screws. Specify per XL11-557. Only available in knob trim. Available with L escutcheon and rose (sectional) trim only. Only available with knob. L9412 x XL11-907 Exit Lock With Deadbolt Latchbolt retracted by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is locked. Specify per XL11907. Escutcheon trim only, if Rose trim is required, order L9480 Rose trim less outside cylinder. L9460 x XL11-635 L9460 With Fixed Dummy Trim Knob/lever both sides fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Specify per XL11-635. L9460, L9462, L9464 x XL11-886 Deadbolt With Retraction By Inside Lever or Knob L9460: Deadbolt thrown or retracted by key outside or thumbturn inside. Outside knob/lever always fixed. Inside knob/lever active when deadbolt is extended. Rotating inside knob/lever will retract deadbolt. L9462: Same as above, except deadbolt thrown or retracted by key from either side. L9464 (shown): Same as above, except deadbolt thrown or retracted by key from one side. Specify desired function per XL11-886. L-8 MORTISE L9110 x XL11-741 LV- Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked. * Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Note: 1) For pricing on special functions, see “Special Options” page Price Book 8 172 Effective April 4, 2020 • Rev. 04/20 Functions • L L909x EL/EU Electrified Locks L9090EL / LV9090EL Electrically locking/unlocking L9090EU / LV9090EU outside lever, no cylinder Outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Inside lever always free for immediate egress. L9092EL / LV9092EL L9092EU / LV9092E Electrically locking/unlocking both levers, no cylinder Inside and outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Electrically locking/unlocking outside lever, Outside cylinder (replaces L9080EL/EU) Outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key outside or knob/lever inside. Aux latch deadlocks latchbolt when door is locked. Inside lever always free for immediate egress. L9093EL / LV9093EL Electrically locking/unlocking both levers, L9093EU / LV9093EU Outside cylinder Inside and outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key outside. Aux latch deadlocks latchbolt when door is locked L9094EL / LV9094EL Electrically locking/unlocking outside L9094EU / LV9094EU lever, Inside and outside cylinder Outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key inside or outside or knob/lever inside. Aux latch deadlocks latchbolt when door is locked. Inside lever always free for immediate egress. L9095EL / LV9095EL Electrically locking/unlocking both levers, L9095EU / LV9095EU Inside and outside cylinder (replaces L9082EL/EU) Inside and outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key inside or outside. Aux latch deadlocks latchbolt when door is locked. L9493EL / LV9493EL Electrically locking/unlocking both L9493EU / LV9493EU levers, outside cylinder, inside thumbturn, with deadbolt Inside and outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Deadbolt thrown or retracted by key outside or thumbturn inside. When unlocked, rotating inside or outside lever retracts deadbolt and opens door. Aux latch deadlocks latchbolt when door is shut. Deadbolt projection does not control lever lock/unlock state. L9494EL / LV9494EL Electrically locking/unlocking L9494EU / LV9494EU outside lever, inside and outside cylinders, with deadbolt Outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Deadbolt thrown or retracted by key outside or inside. Turning inside knob/ lever retracts deadbolt and opens door. When unlocked, rotating outside lever retracts deadbolt and opens door. Aux latch deadlocks latchbolt when door is shut. Inside lever always free for immediate egress. Deadbolt projection does not control outside lever lock/unlock state. L9495EL / LV9495EL Electrically locking/unlocking both L9495EU / LV9495EU levers, inside and outside cylinders, with deadbolt Inside and outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Deadbolt thrown or retracted by key outside or inside. When unlocked, rotating inside or outside lever retracts deadbolt and opens door. Aux latch deadlocks latchbolt when door is shut. Deadbolt projection does not control lever lock/unlock state. Price Book 8 Effective April 4, 2020 • Rev. 04/20 173 L-9 L9091EL / LV9091EL L9091EU / LV9091EU L9492EL / LV9492EL Electrically locking/unlocking L9492EU / LV9492EU outside lever, outside cylinder, inside thumbturn, with deadbolt Outside knob/lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever retracts deadbolt and opens door. When unlocked, rotating outside lever retracts deadbolt and opens door. Aux latch deadlocks latchbolt when door is shut. Inside lever always free for immediate egress. Deadbolt projection does not control outside lever lock/unlock state. M ORTISE All locks feature automatic detection and operation with 12 or 24V DC, and a case-mounted switch that allows customer selection of EL (fail safe - power failure allows either knob/lever to retract latchbolt and/or deadbolt) or EU (fail secure - power failure locks both knobs/ levers) operation. Please specify lock function as EL or EU for default switch postion. Locks also come standard with Allegion Connect molex connector with 3" lead. Allegion Connect is a molex connector system that allows rapid installation of locks when used with Allegion Connect Harnesses (see page 198) and Allegion Connect Hinges (see Ives pricebook). For more information speak with your sales representative. The molex connector can also be cut off so that the lock can be installed with traditional splicing. Available options for electrified functions: Request to Exit................... specify RX in the option string Latchbolt Monitor............. specify LX in the option string Door Position Sensor........ specify DPS in the option string (non deadbolt models only) Deadbolt Monitor.............. specify DM in the option string (deadbolt models only) Vandlgard............................ use LV within function designation. Vandlgard function allows exterior lever to rotate freely down, while remaining securely locked. L • Functions LM9300 MultiPoint Lock L-10 MORTISE For use only with MultiPoint Lock Tornado, Tornado Shutter, Hurricane, or Security solution. Solution requires door and rod set sold through Steelcraft. Please contact your local sales representative for more details. Please specify handing on order (LM9300 handing not field reversible). Available for 1-3/4" door thickness. LM9310 Passage Latch Latchbolt retracted by knob/lever from either side at all times. Inside and outside knob/lever Is always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed. LM9325 Exit Lock Latchbolt retracted by knob/lever from inside at all times. No trim on outside. Auxiliary latch deadlocks latchbolt when door is closed. LM9350 LMV9350 Office and Inner Entry Lock Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key and knob/lever outside or by knob/ lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Inside knob/lever is always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed. LM9370 LMV9370 Classroom Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. When outside is locked, latchbolt is retracted by key and knob/lever outside or by knob/ lever inside. Inside knob/lever is always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed. LM9371 LMV9371 Classroom Security Lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When outside is locked, latchbolt is retracted by key and knob/lever outside or by knob/lever inside. Inside knob/lever is always free for immediate egress. Auxiliary latch deadlocks latchbolt when door is closed. LM9380 LMV9380 Storeroom Lock Latchbolt retracted by outside knob/ lever after key inserted and turned 280° or anytime by inside lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/ lever is always free for immediate egress. Specify handing on order. 180 degree messaging indicator available. See options section for details. Price Book 8 174 Effective April 4, 2020 • Rev. 04/20 Functions • L M ORTISE L-11 this page intentionally left blank Price Book 8 Effective April 4, 2020 • Rev. 04/20 175 L • Complete Locks Standard Lever Collection* A, B or C Rose Trim Cast or Forged Lever Designs with Wrought Roses 01 02 2¹⁄₁₆" 03 1¹³⁄₁₆" MORTISE 3⁷⁄₈" 07 2" 2³⁄₈" 4⁵⁄₈" 4⁵⁄₈" LAT 2¹⁄₃₂" Accent (ACC) 4¹⁄₈" 41 5¹⁄₁₆" 3⁵⁄₁₆" 2" 4" 4" 2⁵⁄₈" Ispecify hand 2³⁄₁₀" Merano (MER) 2" 3¹⁄₈" ³⁄₈" 2⁹⁄₁₆" Asti (AST) 2" OME 4⁷⁄₈" 2⁹⁄₁₆" 4³⁄₄" 3" ¹⁄₂" 4³⁄₄" 2¹¹⁄₁₆" ¹⁄₂" Ispecify hand LON 2" 4⁷⁄₈" 2¹⁵⁄₁₆" 3¹⁄₁₆" max. 2⁷⁄₈" 2¹⁄₂" L-12 17 1³¹⁄₃₂" 18 2⁷⁄₈" 12 ¹⁄₂" 4⁵⁄₈" 3³⁄₄" 2¹³⁄₁₆" 2¹³⁄₁₆" 06 2⁹⁄₃₂" 4³⁄₄" 4³⁄₄" 2¹¹⁄₁₆" 2" 05 ¹⁄₂" Dia. ¹¹⁄₁₆" Ispecify hand 3¹⁄₈" Ispecify hand 42 2¹⁄₄" 2¹⁄₈" 2³⁄₄" 2³⁄₄" Note: Above images shown with A Rose. Wrought Rose Designs A B C (not available 612 or 613 finish) 2 1/8" (54 mm) diameter 2 9/16" (65mm) diameter 2 5/8" (66mm) diameter Price Book 8 176 AVA (AST lever only) 2 5/8" (66mm) diameter Effective April 4, 2020 • Rev. 04/20 MER (MER lever only) 2 5/8" (66mm) diameter Complete Locks • L A, B or C Rose Trim L-Series (A, B or C Rose Trim) - Standard Collection levers Add $1,004 MultiPoint Lock 6: 01, 02, 05, 18, 41, 42, LAT*, LON* ACCI†, ASTI†, MERI† * Not available 612, 613 † Not available 612, 613, 629, 630 Finishes 626 626 605 606 609 612 619 622 625 643e 613 629 630 LM9310 Passage Exit Lock Exit - MultiPoint Lock Only Privacy Privacy w/ coin turn Electrified Lock (keyless) Privacy w/ deadbolt Privacy w/ deadbolt and coin turn Single dummy Double dummy Single dummy with case Double dummy with case $599 466 1,699 705 775 1,030 828 895 198 405 325 516 $709 576 1,809 815 885 1,140 938 1,005 253 515 380 626 $721 588 1,821 827 897 1,152 950 1,017 259 527 386 638 $739 606 1,839 845 915 1,170 968 1,035 269 545 396 656 Exit Lock with Cylinder LM9350P Entrance/Office Entrance/Office with auto unlocking LM9370P Classroom Classroom holdback LM9380P Storeroom Electrified Lock (outside cylinder) $669 798 882 $779 908 992 $791 920 1,004 $809 938 1,022 798 908 920 938 1,121 1,231 1,243 1,261 828 938 950 968 918 882 917 1148 917 1,028 992 1,027 1,258 1,027 1,040 1,004 1,039 1,270 1,039 1,058 1,022 1,057 1,288 1,057 $888 $998 $1,010 $1,028 1,210 1,320 1,332 1,350 916 1,026 1,038 1,056 888 1238 998 1,348 1,010 1,360 1,028 1,378 Description Entrance w/ deadbolt Corridor w/ deadbolt Closet/Storeroom w/ deadbolt Dorm/Bedroom w/ deadbolt Storeroom w/ deadbolt Faculty Restroom Faculty restroom with 09-611 “Do not disturb” indicator Electrified lock (outside cylinder, inside thumbturn, deadbolt) Privacy w/ Deadbolt & 09-611 L583-375 “Occupied” indicator L9456P LV9456P L9465P L9473P L9480P LV9480P L9485P** LV9485P L9486P LV9486P L9492P&93P EL&EU LV9492P&93P EL&EU L9496P LV9496P Keyed Double Cylinder Functions L9060P LV9060P Apartment entrance L9071P LV9071P LM9371P Classroom security L9077P LV9077P Classroom security holdback L9082P LV9082P Institution Electrified Lock (Inside and outside cylinder) L9094P&95P EL&EU LV9094P&95P EL&EU L9457P LV9457P Classroom security w/ deadbolt L9458P LV9458P Classroom security w/ deadbolt & aux latch L9466P Storeroom w/ deadbolt L9494P&95P EL&EU LV9494P&95P EL&EU Electrified lock (inside and outside cylinder, deadbolt) ** 03 06 07 12I 17 OME Specify door hand for faculty restroom locks. Faculty Restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately. Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms and Conditions for more information. Price Book 8 Effective April 4, 2020 • Rev. 04/20 177 L-13 Function Keyless Functions L9010 L9025 LM9325 L9040 LV9040 L9044 LV9044 L9090&91 EL&EU LV9090&91 EL&EU L9440 LV9440 L9444 LV9444 L0170 L0172 L9175 L9176 Keyed Single Cylinder Functions L9026P L9050P LV9050P L9056P LV9056P L9070P LV9070P L9076P LV9076P L9080P LV9080P L9092P&93P EL&EU LV9092P&93P EL&EU LV9453P L9453P 06 07 12I 17 OME M ORTISE Add $101 for Vandlgard Option Vandlgard not available on knobs or ligature resistant trim. Lever or Knob Designs and Finishes 03 L • Complete Locks Standard Lever Collection* Escutcheon Trim Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons 01 02 MORTISE 2¹⁄₁₆" 03 1¹³⁄₁₆" 3⁷⁄₈" 2¹⁄₁₆" 07 ¹⁄₂" 2" 2¹³⁄₁₆" 2¹³⁄₁₆" 3⁷⁄₈" 12 2¹¹⁄₁₆" 2" 1³¹⁄₃₂" 4⁵⁄₈" Accent (ACC) 4¹⁄₈" 3⁵⁄₁₆" ³⁄₈" 2⁹⁄₁₆" 4" 3¹⁄₈" 2" Ispecify hand Ispecify hand 4" 2" 4" 41 3¹⁄₈" 2⁵⁄₈" 42 3¹⁄₈" 2¹⁄₄" 2³⁄₄" 2¹⁄₈" 2³⁄₄" Note: Above images shown with L Escutcheon. 2¹⁄₈" 2¹⁄₄" 2³⁄₄" Cast/Forged (L) or Wrought (N) 2³⁄₄" L N Dimensions: 7 15/16" x 1 3/4" x 7/16" (202mm x 44mm x 11mm) Dimensions: 7 7/8" x 2 1/2" x 7/16" (200mm x 64mm x 11mm) Price Book 8 178 2 ³⁄₁₀" 3⁵⁄₁₆" 2" 2⁵⁄₈" Ispecify hand 5¹⁄₁₆" 4⁷⁄₈" Merano (MER) 4" 4¹⁄₈" 4³⁄₄" 3" 2³⁄₁₀" 2⁹⁄₁₆" 2" ¹⁄₂" 3¹⁄₁₆" max. 4³⁄₄" Asti (AST) 2¹⁵⁄₁₆" OME 2⁹⁄₁₆" 2¹¹⁄₁₆" 2" 4⁵⁄₈" ¹⁄₂" 2⁹⁄₁₆" 4³⁄₄" 3" 2" 4⁷⁄₈" 4⁷⁄₈" 2" 3³⁄₄" ³⁄₈" 4³⁄₄" 2¹⁄₃₂" 2⁹⁄₃₂" 2⁷⁄₈" ¹⁄₂" 2" ¹⁄₂" 4⁷⁄₈" 3¹⁄₈" 3¹⁄₁₆" max. LON 2⁷⁄₈" 2" 2¹⁄₃₂" 2¹⁵⁄₁₆" Ispecify 4⁵⁄₈" hand 2³⁄₈" LAT 2¹⁄₂" 2¹⁄₃₂" 2⁹⁄₃₂" 4³⁄₄" 172¹³⁄₁₆" 4⁵⁄₈" 2⁷⁄₈" 2¹⁄₂" 2⁷⁄₈" 2" 2¹³⁄₁₆" 4⁵⁄₈" ¹⁄₂" 2¹¹⁄₁₆" 4³⁄₄" 2" 2³⁄₈" 18 ¹⁄₂" Dia. ¹¹⁄₁₆" 1¹³⁄₁₆" 1³¹⁄₃₂" 4⁵⁄₈" 3³⁄₄" 1¹³⁄₁₆" 2¹⁄₁₆" 2¹¹⁄₁₆" 2⁹⁄₃₂" 4³⁄₄" 4³⁄₄" 06 L-14 05 ¹⁄₂" Dia. ¹¹⁄₁₆" Effective April 4, 2020 • Rev. 04/20 Complete Locks • L L or N Escutcheon Trim L9444* Add $1,004 MultiPoint Lock Function Keyless Functions L9010 L9025 L9040 LV9040 L9044* LV9044 Lever or Knob Designs and Finishes Standard Lead time: 03, 06, 07, 12I, 17, OME LM9310 LV9444 * ** Description $736 603 842 912 $748 615 854 924 $766 633 872 942 1,032 1,044 1,062 Electrified Lock (keyless) 1,167 1,179 1,197 Privacy w/ Deadbolt Single Dummy (N Escutcheon Only) Double Dummy Single Dummy with Case Double Dummy with Case 965 280 542 407 653 977 292 554 419 665 995 310 572 437 683 Exit Lock with Cylinder Entrance/Office Entrance/Office w/ Auto Unlocking Classroom Classroom Holdback Storeroom 806 935 1,019 818 947 1,031 836 965 1,049 935 947 965 Electrified Lock (outside cylinder) 1,258 1,270 1,288 Passage Exit Lock Privacy Privacy w/ Coin Turn and Outside Indicator (N Escutcheon Only) Privacy w/ Deadbolt, Coin Turn and Outside Indicator (N Escutcheon Only) Entrance/Office w/ Deadbolt Corridor w/ Deadbolt Closet/Storeroom w/ Deadbolt Dorm/Bedroom w/ Deadbolt Storeroom w/ Deadbolt Faculty Restroom 965 977 995 1,055 1,019 1,067 1,031 1,085 1,049 Electrified lock (outside cylinder, inside thumbturn, deadbolt) 1,285 1,297 1,315 Apartment Entrance Classroom Security Classroom Security Holdback Institution $1,025 $1,037 $1,055 1,347 1,359 1,377 Electrified Lock (Inside and outside cylinder) Classroom Security w/ Deadbolt Classroom Security w/ Deadbolt & Aux Latch Storeroom w/ Deadbolt 1,053 1,065 1,083 1,025 1,037 1,055 Electrified lock (inside and outside cylinder, deadbolt) 1,375 1,387 1,405 L-15 L9090&91 LV9090&91 EL&EU EL&EU L9440 LV9440 L0170 L0172 L9175 L9176 Keyed Single Cylinder Functions L9026P L9050P LV9050P LM9350P L9056P LV9056P L9070P LV9070P LM9370P L9076P LV9076P L9080P LV9080P LM9380P LV9092P&93P L9092P&93P EL&EU EL&EU L9453P LV9453P L9456P LV9456P L9465P L9473P L9480P LV9480P L9485P** LV9485P L9492P&93P LV9492P&93P EL&EU EL&EU Keyed Double Cylinder Functions L9060P LV9060P L9071P LV9071P LM9371P L9077P LV9077P L9082P LV9082P LV9094P&95P L9094P&95P EL&EU EL&EU L9457P LV9457P L9458P LV9458P L9466P L9494P&95P LV9494P&95P EL&EU EL&EU 6: 01, 02, 05, 18, 41, 42, LAT*, LON*, ACCI† , AST I†, MER I†, * Not available 612, 613 † Not available 612, 613, 629, 630 Finishes 626 605 606 609 613 629 630 612 619 622 625 643e Not available less indicator or in 612, 613 finish. Indicator price already included. Specify door hand for faculty restroom locks. Faculty restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise. specified. Emergency keys must be ordered separately. Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families See Terms and Conditions for more information. 2) L escutcheon available 1 3/8"- 2 1/2" doors non-Vandlgard functions, 1 3/4"-2 1/2" doors on Vandlgard functions. N escutcheon available 1 3/4" - 2 1/4" non-Vandlgard and Vandlgard functions. Price Book 8 Effective April 4, 2020 • Rev. 04/20 M ORTISE Add $101 for Vandlgard Option Vandlgard not available on knobs or ligature resistant trim. L-Series (L or N Escutcheon) - Standard Collection Levers 179 L • Complete Locks M Lever Collection* A, B or C Rose Trim Cast or Forged Lever Designs with Wrought Roses M51 M52 M53 2.2" 2.4" 4.5" 4.5" MORTISE 2.6” 4.35” 3" 3.2" M54 3.2” 2.2" 2.4" 4.5" M55 M56 4.5" 2.14” 2.14” 3.2" 2.3” 2.6” 4.35” 2.1” 3" 3.2” 4.3” 4.35” 3” 2.75” 4.6” 2.4” 3” 2.14” 2.14” M57 2.1” M61 2.3” M62 4.35” 1.9” 3” 2.75” 4.5” 3.2” 2.9” Ispecify hand 2.15” 2.1” 2.7” 1.9” Ispecify hand 4.5” M81 4.5” M82 4.5” 0.4” 0.4” 2.1” 3.2” 2.7” 2.9” 2.1” 4.5” 3” 4.5” 4.5” M63 4.6” 2.4” 2.1” 2.15” L-16 4.3” 4.8” 2.2” 4.8” 2.1” 2.9” Ispecify hand 3.2” 0.4” 4.5” M83 M84 3.2” 0.4” 0.4” 2.9” 2.1” 4.8” 0.4” 4.8” 2.2” M85 0.3” 2.9” 4.6” 2.9” 5.1” 0.4” 2.9” 4.6” ME2 0.4” 3.3” 3” 5.5” 0.4” 3.2” 2.8” 0.4” 5.5” 0.4” 5.1” 5.2” Wrought Rose Designs 2.125” 2.125” 2.125” 3.0” B C (not available 612 or 613 finish) 2.8” 2 9/16" (65mm) diameter 2 5/8" (66mm) diameter Price Book 8 180 5.1” 2.125” 2.125” 2 1/8" (54 mm) diameter 4.9” 5.1” 5.2” 2.125” Ispecify hand 0.4” 2.9” A 3.3” ME3 0.4” 3.0” 0.3” 0.4” 3” ME1 4.9” Effective April 4, 2020 • Rev. 04/20 3.2” Note: Above images shown with A Rose. Complete Locks • L A, B or C Rose Trim - M Collection ** Add $1,004 MultiPoint Lock Vandlgard not available on knobs or ligature resistant trim. 6: M54, M56, M61I, M63I, M83, M84, M85 6: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3 † Available 629 and 630 only Finishes 605 606 609 619 622 625 626 629 630 643e Description Passage Exit Lock Exit - MultiPoint Lock Only Privacy Privacy w/ Coin Turn Electrified Lock (keyless) $739 606 1,839 845 915 1,170 Privacy w/ Deadbolt Privacy w/ Deadbolt and Coin Turn Single Dummy Double Dummy Single Dummy with Case Double Dummy with Case 968 1,035 269 545 396 656 Exit Lock with Cylinder Entrance/Office Entrance/Office w/ Auto Unlocking Classroom Classroom Holdback Storeroom $809 938 1,022 Electrified Lock (outside cylinder) 1,261 938 Entrance/Office w/ Deadbolt Corridor w/ Deadbolt Closet/Storeroom w/ Deadbolt Dorm/Bedroom w/ Deadbolt Storeroom w/ Deadbolt Faculty Restroom Faculty restroom with 09-611 “Do not disturb” indicator 1,058 1,022 1,057 Electrified lock (outside cylinder, inside thumbturn, deadbolt) 1,288 Privacy w/ Deadbolt & 09-611 L583-375 “Occupied” indicator 1,057 968 Apartment Entrance Classroom Security Classroom Security Holdback Institution $1,028 Electrified Lock (Inside and outside cylinder) 1,350 Classroom Security w/ Deadbolt Classroom Security w/ Deadbolt & Aux Latch Storeroom w/ Deadbolt Electrified lock (inside and outside cylinder, deadbolt) L-17 Function Keyless Functions L9010 LM9310 L9025 LM9325 L9040 LV9040 L9044 LV9044 L9090&91 LV9090&91 EL&EU EL&EU L9440 LV9440 L9444 LV9444 L0170 L0172 L9175 L9176 Keyed Single Cylinder Functions L9026P L9050P LV9050P LM9350P L9056P LV9056P L9070P LV9070P LM9370P L9076P LV9076P L9080P LV9080P LM9380P L9092P&93P LV9092P&93P EL&EU EL&EU L9453P LV9453P L9456P LV9456P L9465P L9473P L9480P LV9480P L9485P** LV9485P L9486P LV9486P L9492P&93P LV9492P&93P EL&EU EL&EU L9496P LV9496P Keyed Double Cylinder Functions L9060P LV9060P L9071P LV9071P LM9371P L9077P LV9077P L9082P LV9082P L9094P&95P LV9094P&95P EL&EU EL&EU L9457P LV9457P L9458P LV9458P L9466P L9494P&95P LV9494P&95P EL&EU EL&EU Lever Designs Standard Lead time: M51, M52, M81 M ORTISE Add $101 for Vandlgard Option L-Series (A, B or C Rose Trim) - M Collection Levers 1,056 1,028 1,378 Specify door hand for faculty restroom locks. Faculty restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately. Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms and Conditions for more information. Price Book 8 Effective April 4, 2020 • Rev. 04/20 181 L • Complete Locks M Lever Collection Escutcheon Trim Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons M51 M52 M53 2.2" 2.4" 4.5" 4.5" MORTISE 2.6” 4.35” 3" 3.2" 3.2” 2.2” 2.4” M54 2.55” M55 4.5” 2.14” 4.35” 2.1” 2.14” 3.2” M56 4.5” 3” 3.2” 2.3” 4.3” 4.35” 3” 3” 2.75” 4.6” 2.4” 2.1” 2.125” 2” M57 M61 2.3” M62 4.3” 4.35” 4.5” 2.4” 2.1” 2.15” 1.9” L-18 3” 4.5” 2.75” 3.2” 2.9” 2.7” Ispecify hand 2.1” M63 1.9” M82 4.5” 0.4” 0.4” 2.6” 3.2” 2.1” 4.5” Ispecify hand 4.5” 4.5” 2.9” 3.2” Ispecify hand 2” M81 2.1” 4.8” 2.2” 4.8” 2.9” 2” 3” 4.5” 4.5” 2.9” 0.4” 0.4” 4.5” M83 M84 0.4” M85 2.1” 0.3” 0.4” 3.15” 4.8” 2.2” 4.8” 2.85” 2.9” 4.6” 4.9” 5.1” 0.4” 2.9” 3.3” 3” 0.4” ME1 ME2 ME3 4.6” 0.4” Ispecify hand 0.3” 5” 5” 0.4” 0.5” 2.125” 3” 5.4” 3.3” 2.85” 5.0” 5.2” 0.4” 0.4” 0.5” 3.2” 2.9” 3.0” Note: Above images shown with L escutcheon. Cast/Forged (L) or Wrought (N) 2.9” 3.0” L 3.2” N Dimensions: 7 15/16" x 1 3/4" x 7/16" (202mm x 44mm x 11mm) Dimensions: 7 7/8" x 2 1/2" x 7/16" (200mm x 64mm x 11mm) Price Book 8 182 5.0” 5.2” 5.4” Effective April 4, 2020 • Rev. 04/20 Complete Locks • L L or N Escutcheon Trim - M Collection L9444* Add $1,004 MultiPoint Lock Vandlgard not available on knobs or ligature resistant trim. Function Keyless Functions L9010 L9025 L9040 LV9040 L9044* LV9044 LM9310 LV9444 * ** 6: M54, M56, M61I, M63I, M83, M84, M85 6: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3 † Available 629 and 630 only Finishes 605 606 609 619 622 625 626 629 630 643e Description Passage Exit Lock Privacy Privacy w/ Coin Turn and Outside Indicator (N Escutcheon Only) Privacy w/ Deadbolt, Coin Turn and Outside Indicator (N Escutcheon Only) $766 633 872 942 1,062 Electrified Lock (keyless) 1,197 Privacy w/ Deadbolt Single Dummy (N Escutcheon only) Double Dummy Single Dummy with Case Double Dummy with Case 995 310 572 437 683 Exit Lock with Cylinder Entrance/Office Entrance/Office w/ Auto Unlocking Classroom Classroom Holdback Storeroom $836 965 1,049 Electrified Lock (outside cylinder) 1,288 965 Entrance/Office w/ Deadbolt Corridor w/ Deadbolt Closet/Storeroom w/ Deadbolt Dorm/Bedroom w/ Deadbolt Storeroom w/ Deadbolt Faculty Restroom 1,085 1,049 Electrified lock (outside cylinder, inside thumbturn, deadbolt) 1,315 Apartment Entrance Classroom Security Classroom Security Holdback Institution Electrified Lock (Inside and outside cylinder) Classroom Security w/ Deadbolt Classroom Security w/ Deadbolt & Aux Latch Storeroom w/ Deadbolt Electrified lock (inside and outside cylinder, deadbolt) L-19 L9090&91 LV9090&91 EL&EU EL&EU L9440 LV9440 L0170 L0172 L9175 L9176 Keyed Single Cylinder Functions L9026P L9050P LV9050P LM9350P L9056P LV9056P L9070P LV9070P LM9370P L9076P LV9076P L9080P LV9080P LM9380P L9092P&93P LV9092P&93P EL&EU EL&EU L9453P LV9453P L9456P LV9456P L9465P L9473P L9480P LV9480P L9485P** LV9485P L9492P&93P LV9492P&93P EL&EU EL&EU Keyed Double Cylinder Functions L9060P LV9060P L9071P LV9071P LM9371P L9077P LV9077P L9082P LV9082P L9094P&95P LV9094P&95P EL&EU EL&EU L9457P LV9457P L9458P LV9458P L9466P L9494P&95P LV9494P&95P EL&EU EL&EU Lever Designs Standard Lead time: M51, M52, M81 995 $1,055 1,377 1,083 1,055 1,405 Not available less indicator or in 612, 613 finish. Indicator price already included. Specify door hand for faculty restroom locks. Faculty Restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise specified. Emergency keys must be ordered separately. Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms and Conditions for more information. 2) L escutcheon available 1 3/8"- 2 1/2" doors non-Vandlgard functions, 1 3/4"-2 1/2" doors on Vandlgard functions. N escutcheon available 1 3/4" - 2 1/4" non-Vandlgard and Vandlgard functions. Price Book 8 Effective April 4, 2020 • Rev. 04/20 M ORTISE Add $101 for Vandlgard Option L-Series (L or N Escutcheon Trim) - M Collection Levers 183 L • Complete Locks L-Series - Ligature Resistant Trim L-Series - Ligature Resistant Trim SL1 Trim MORTISE HSLR Trim L-20 SK1 Trim HSLR Passage Functions: L9010 HSLR Single-Sided Cylinder Functions: L9070 L9080 L9092&93P EL&EU L9465 HSLR Emergency Turn by Thumb Turn Functions: L9044 L9444 HSLR Cylinder by Thumb Turn Functions: L9050 L9056 L9453 L9456 L9473 L9480 L9485 L9492P&93P EL &EU Price Book 8 184 Effective April 4, 2020 • Rev. 04/20 HSLR Cylinder by Cylinder Functions: L9071 L9082 L9094P&95P EL&EU L9457 L9466 Complete Locks • L L-Series - Ligature Resistant Trim L-Series - Ligature Resistant Trim SK1 SL1 HSLR Finishes Description 6301 L9010 Passage $1,531 $1,759 1,637 1,865 - - - 2,185 - M ORTISE Part Number Keyless Functions $2,009 L9040 Privacy L9044 Privacy w/ coin turn L9090&91 EL & EU Electrified Keyless 1,962 2,190 L9440 Privacy w/ deadbolt 1,760 1,988 - L9444 Privacy w/ deadbolt and outside coin turn - - 2,305 $1,730 $1,958 $2,208 1,814 2,042 2,292 Keyed Single Cylinder Functions L9050P Entrance/Office L9056P Entrance/Office with auto unlocking Classroom 1,730 1,958 2,208 Classroom Holdback 1,730 1,958 - L9080P Storeroom 1,730 1,958 2,208 L9092P&93P EU & EL Electrified Lock (outside cylinder) 2,053 2,281 2,531 L9453P Entrance w/ deadbolt L9456P Corridor w/ deadbolt L9465P Closet/Storeroom w/ deadbolt 1,760 1,988 2,238 L9473P Dorm/Bedroom w/ deadbolt L9480P Storeroom w/ deadbolt 1,850 2,078 2,328 L9485P** Faculty Restroom 1,814 2,042 2,292 L9492P&93P EU & EL Electrified Lock (outside cylinder, inside thumbturn, deadbolt) 2,053 2,281 2,531 L-21 L9070P L9076P Keyed Double Cylinder Functions L9060P Apartment Entrance L9071P Classroom Security L9077P Classroom Security Holdback 1,820 2,048 2,298 2,269 L9082P Institution L9094P&95P EU & EL Electrified Lock (Inside and outside cylinder) 2,142 2,370 2,620 L9457P Classroom Security w/ deadbolt 1,848 2,076 2,326 L9458P Classroom Security w/ deadbolt & aux latch L9466P Storeroom w/ deadbolt 1,820 2,048 2,298 L9494P&95P EU & EL Electrified Lock (inside and outside cylinder, deadbolt) 2,170 2,398 - 1 - SL1 and SK1 are also available in 630AM. HSLR Trim not available in 630AM Notes: Specify XL11-000 in comments when ordering ligature resistant knob and XL12-482 when ordering ligature resistant lever. Price includes lever/knob, thumbturn & cylinder ring as appropriate. Not available less components or cylinders; less core is available. Mixed trim ligature resistant knob and lever available - specify both XL11-000 and XL12-482 in comments. SL1 and SK1 trim not available with Vandlgard option. SL1 and SK1 trim not available on LM9300 Multi-Point Locks. HSLR Door Prep Installation Template Part Number Description List Price 47278471 Door prep installation template for L Lock HSLR Trim $464.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 185 L • Complete Locks Commercial Lever Suites Commercial Lever Suite L-22 MORTISE Standard Levers L Mortise LT Tubular 01 01 02 02 03 03 05 06 07 12 17 18 Latitude Longitude Omega Asti Merano Accent M52* M81* 05 06 07 12 17 18 Latitude Longitude Omega Asti Merano Accent M52* M81* ND Cylindrical AL Cylindrical 03 Rhodes Athens Saturn Jupiter Saturn Jupiter Sparta Neptune Neptune Omega Omega Flair Broadway Boardwalk M Collection Levers LT Tubular M51 M52 M53 M54 M55 M56 M57 M61 M62 M63 M81 M82 M83 M84 M85 ME1 ME2 ME3 M51 M52 M53 M54 M55 M56 M57 M61 M62 M63 M81 M82 M83 M84 M85 ME1 ME2 ME3 33A/35A, 94/95, 98/99 Exit Devices (Von Duprin) M51 M52 M53 M54 M55 M56 M57 M61 M62 M63 M81 M82 M83 M84 M85 ME1 ME2 ME3 Price Book 8 186 33A/35A, 94/95, 98/99 Exit Devices (Von Duprin) 01 02 Tubular *The M52 is equivalent to the Broadway lever and the M81 is equivalent to the Boardwalk lever. L Mortise S Tubular Effective April 4, 2020 • Rev. 04/20 05 06 07 12 17 18 Latitude Longitude 16 Asti Merano Accent Complete Locks • L L9000-Series Deadbolt Locks, L400-Series Deadbolt Locks L9000-Series Deadbolt Locks LigatureResistant Trim (SL1 and SK1 only)# Finishes Description 626 L9460P Single cylinder outside, turn inside $437 $443 $453 $861 L9462P Double cylinder 546 552 562 810 L9463PI Single cylinder outside, classroom turn inside 546 552 562 - L9464P Single cylinder outside, blank inside 373 379 389 515 613 629 630 630/630AM M ORTISE Part Number Keyed 605 606 609 612 619 622 625 643 For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms and Conditions for more information. # Specify XL11-000 in comments when ordering ligature-resistant option. L400-Series Deadbolt Locks Finishes Part Number Keyed Description 626 605 606 609 612 619 622 625 643 L460P Single cylinder outside, turn inside $297 $303 $313 $707 L462P Double cylinder 350 356 366 612 L463PI Single cylinder outside, classroom turn inside 350 356 366 - L464P Single cylinder outside, blank inside 287 293 303 428 L496P Keyless L460 with 09-611 L583-375 “Occupied” indicator 430 436 446 - L480 Door bolt $247 $253 $263 $540 613 629 630 630/630AM For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms and Conditions for more information. # Specify XL11-000 in comments when ordering ligature-resistant option. Price Book 8 Effective April 4, 2020 • Rev. 04/20 187 L-23 LigatureResistant Trim (SL1 and SK1 only)# L • Options Cylinder Options Cylinder Adjustments Specify Description Lock Price Adjustment (per cylinder) MORTISE Concealed Cylinder (L Escutcheon only) C Suffix $27.00 Concealed mortise cylinder for L escutcheon Full Size Interchangeable Core (FSIC) R Suffix Full size interchangeable core (furnished 1-bitted w/ two 6-pin keys unless otherwise specified) J Suffix Less full size interchangeable core $75.00 N/C Full Size Construction Core T Suffix Full size interchangeable core - Construction core (assessed handing charge 50-231 per core) $75.00 Small Format Interchangeable Core (SFIC) (Not available with Hotel Functions L9485 or L9486) G7 Suffix Everest patented core (specify key symbol; see Terms & Conditions for more details) B Suffix Less small format interchangeable core $87.00 N/C L-24 Small Format Construction Core & Disposable Core H Suffix Small format construction core interchangeable core - construction core(assessed handing charge 50-231 per core) BDC Suffix Small format disposable core interchangeable core - disposable $45.00 N/C Construction Core Handling Charge 50-231 Handing charge for construction core (assessed per core, non-refundable) Notes $10.70 Control keys are not furnished with locks and must be purchased separately. See Keys & Keying. Interchangeable cores are not available with concealed cylinders. Ordering instructions: Add suffix to lock function. Ex: L9050J (L9050 function less full size core) Primus / Primus XP - available through specific channels based on security levels. See Terms & Conditions for details. Specify Description Lock Price Adjustment Full-Face Primus Cylinders -$88 per cylinder L Suffix Order lock less cylinder; order Primus cylinder 20-787 or 20-793 separately 20-787 Full-face Primus cylinder w/ compression ring & spring (for use with rose trim) 169.00 20-793 Full-face Primus cylinder only (for use with escutcheon trim) 159.00 Concealed Primus Cylinders W Suffix Order lock less concealed mortise cylinder; order Primus cylinder 20-589 separately $28.00 20-589 Concealed Primus cylinder (for use with L escutcheon w/ concealed cylinder only) 225.00 Full-Size Interchangeable Primus Core J Suffix Order lock less full size interchangeable core; order full-size Primus core 20-740 separately 20-740 $157.00 Full-size interchangable Primus core Notes Primus not available for Faculty Restroom function (L9485, L9486) dd suffix to lock function, order Primus cylinder separately. Ordering instructions: A Ex: L9050W (L9050 function less concealed cylinder) order 20-589 on separate line. Price Book 8 188 N/C for J Suffix Effective April 4, 2020 • Rev. 04/20 Options • L Armor Fronts and Strikes Armor Fronts, L9000 & L400-Series Specify Description Lock Price Adjustment 1 1/4" Wide (Standard armor size for 1 3/4" and larger door thicknesses) Blank (L9175, L9176) 09-662 Latch only (L9010, L9040, L9044) 09-663 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082, L9090/91/92/93/95/95*) 09-713 Latch x aux latch (L9076, L9077) 09-664 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496) 09-665 Deadbolt (L9460, L9462, L9463, L9464) 09-666 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486, L9492/93/94/95) 09-717 Deadbolt armor (L460, L462, L463, L464, L480, L496) M ORTISE 09-661 N/C 1 1/16" Wide (recommended armor size for doors thinner than 1 3/4", including 1 3/8" doors) 09-667 Blank (L9175, L9176) 09-668 Latch only (L9010, L9040, L9044) 09-669 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082, L9090/91/92/93/94/95*) 09-718 Latch x aux latch (L9076, L9077) 09-670 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496) 09-671 Deadbolt (L9460, L9462, L9463, L9464) 09-672 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486, L9492/93/94/95) L-25 Notes: N/C 1) For L9090/91/92/93/94/95 with DPS use armor 09-666 (1 1/4" wide) or 09-670 ( 1 1/16 wide). 2) Use 09-662 for 1 5/8" thick doors. Use 09-668 for doors 1-9/16" or less. 3) Specify on order only if requesting other than default 10-072 L9000 Standard 10-073 L9000 Deadbolt Standard 10-144 10-145 10-079 L400 Deadbolt Standard 10-078 Strikes, L9000 and L400 Series Specify Description Lock Price Adjustment Strikes, L9000 Series 10-072 1 1/4" x 4 7/8" square corner strike + box, 1 3/16" lip length, standard L9000 strike 10-072 xx 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 7/8", 1" or 1 1/2" 10-072 xx 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 1 3/4" or 2" 10-073 Deadbolt lock strike, standard for L9460, L9462, L9463 and L9464 10-144 One hole strike for latching functions LH/RHR for SK1, SL1 and HSLR Trim 10-145 One hole strike for latching functions RH/LHR for SK1, SL1 and HSLR Trim 10-075 1/2" rabbeted strike 37-015 Door frame strike reinforcer (finish not applicable) N/C $32.20 N/C N/C 111.00 N/C Strikes, L400 Series N/C 10-078 1 1/4" x 4 7/8" square corner strike + box 10-079 1 1/8" x 3 1/2" square corner strike + box, ANSI 115.5 prep, standard L400 strike Ordering instructions: Specify on order only if requesting other than default. Price Book 8 Effective April 4, 2020 • Rev. 04/20 189 L • Options Locks Less Components, Locks Less Lock Case L-26 MORTISE Locks Less Components Description Specify Less each knob or lever LLL for knob/lever design Example: L9050P LLL/03A x 03A -$28.30 Less each inside rose or inside escutcheon only LLL for rose/escutcheon design Example: L9050P 03A x 03A/LLL -28.30 Less complete trim outside* (Less inside trim is not available) LLL for complete trim outside Example: L9050P LLL x 03A -56.60 Less full face cylinder (rose trim) L suffix Example: L9050L 03A -86.00 per cylinder Less full face cylinder L suffix Example: L9050L 03L -75.00 per cylinder Less concealed mortise cylinder (L escutcheon only) W suffix Example: L9050W 03L -75.00 per cylinder Less hotel cylinder (rose trim) L suffix, Faculty Restroom Function (L9485 or L9486) Example: L9485L 03A -127.00 Less hotel cylinder (escutcheon trim) L suffix, Faculty Restroom Function (L9485 or L9486) Example: L9485L 03L -121.00 Less armor front LLL for armor front Example: L9050P 03A 626 LLL 10-072 -17.30 Less strike LLL for strike Example: L9050P 03A 612 09-663 LLL -13.60 Less complete trim both sides LLL for complete trim both sides Example: L9050L LLL 626 LLL 626 09-663 LLL Lock case, strike and armor front only * Notes: Lock Price Adjustment Sum of applicable deducts, use 06A design and specified finish for base price. L283-150 furnished to mount inside trim when lock is ordered less outside trim for rose designs only. Add $40.40 per lock. 1) L-Series locks ordered less all components are furnished as lock cases. See L Parts: Lock Cases. 2) Not available with ligature resistant knob (SK1, XL11-000 option), ligature resistant lever (SL1, XL12-482 option) or HSLR trim. Locks Less Lock Case (Trim Kits) Function Specify L9010 Function, design, finish, LLL for armor, LLL for strike and “less lock case” Example: L9010 O3A 626 LLL LLL, less lock case L9040, L9044, L9440, L9444 Lock Price Adjustment L9060, L9071, L9077, L9082, L9457, L9466 -227.00 -304.00 L9050, L9056, L9070, L9076, L9080 L9453, L9456, L9465, L9473, L9480, L9485, L9486, L9486 “Occupied”, L9496 -$181.00 Function less cylinder (use L suffix), design, finish, LLL for armor, LLL for strike, and “less lock case” Example: L9050L O6L 613 LLL LLL, less lock case -330.00 -373.00 Notes: 3) Locks less lock case are furnished less cylinder(s), armor front, and strike. Included are complete sets of outside and inside trim with spring cages, spindles, mounting screws and thru-bolts as required for the function specified. 4) Deductions are applied to complete lock prices. 5) Not available with SK1, XL11-000 ligature resistant knob trim, SL1, XL12-482 ligature resistant lever trim or HSLR ligature resistant trim. 6) LV (Vandlgard®) functions, require addition ofr Vandlgard Retrofit kits 39-034 or 39-234. Price Book 8 190 Effective April 4, 2020 • Rev. 04/20 Options • L Non-Standard Door Thickness Non Standard Door Thickness Specify Description Lock Price Adjustment Keyless Functions 1 3/8" door thickness (not available with LV (Vandlgard) functions) thickness & how applied (xx) For > 1 3/4" - 2 1/2" thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) For > 2 1/2" - 4" thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) N/C M ORTISE 1 3/8" $105.00 Single Cylinder Functions 1 3/8" 1 3/8" door thickness (not available with LV (Vandlgard) functions) thickness & how applied (xx) For > 1 3/4" - 2 1/2" thick doors For > 2 1/2" - 4" thick doors - specify (xx) Extended Inside (EI) For > 2 1/2" - 4" thick doors - specify (xx) Extended Outside (EO), Equally (EE), or Differently (ED) N/C $105.00 516.00 Double Cylinder Functions 1 3/8" 1 3/8" door thickness (not available with LV (Vandlgard) functions) thickness & how applied (xx) For > 1 3/4" - 2 1/2" thick doors N/C $516.00 For > 2 1/2" - 4" thick doors - specify (xx) Extended Equally (EE) or Extended Differently (ED) 922.00 L-27 For > 2 1/2" - 4" thick doors - specify (xx) Extended Inside (EI) or Extended Outside (EO) L400 Deadbolt Functions Thickness For 1 3/4" - 3" thick doors, Extended Equally only N/C 1) Price keyed locks less cylinders (L or W suffix) same as keyless locks Notes: 2) Locks furnished Extended Equally unless otherwise specified 3) Door thickness must be specified in 1/4" increments only, except for 1 3/8" thick doors 4) Locks w/ N Escutcheon only available for 1 3/4" - 2 3/8" thick doors 5) Locks with small format interchangable cores (BD, BDC, GD, HD suffix) are available 1-3/8" - 2-1/2" for EE, 1-3/8" - 2" EO single/double cylinder and 1-3/8" - 2" EI double cylinder. 6) L9463 function is only available for doors up to 3 5/8" thick extended equally 7) LV (Vandlgard) option only available for 1 3/4" - 3" thick doors 8) Ligature resistant knob (SK1) and lever (SL1) only available on 1 3/4" doors 9) The following functions are only available Extended Equally (EE): L0172, L9066, L9091, L9093, L9095, L9493 and L9495. 10) For lock functions requiring a thumbturn, customers ordering Sectional Trim with a door thickness greater than 3 3/4" (EE) or 2 1/2" (EI) will will receive the larger ADA thumbturn (09-509 x L583-363). Customers ordering Escutcheon Trim with a door thickness greater than 3 1/4" (EE) or 2" (EI) will will receive the larger ADAthumbturn (09-509 x L583-363). Any thumbturns ordered in 612 or 613 finish will also receive the larger ADA thumbturn as standard. Ordering instructions: Include thickness and how extended in order. EX - L9050P 03A 626 2" EE (L9050P function, 03A trim, 626, for 2" door extended equally). Price Book 8 Effective April 4, 2020 • Rev. 04/20 191 Indicators (for Sectional (rose) or N Escutcheon Trim), Tamper-resistant screws, Tactile Warning, ADA Thumbturn, Lever Trak L • Options MORTISE Sectional Indicator Available Messages LOCKED/OCCUPIED/DO NOT DISTURB/ lock symbol is white text on red background UNLOCKED/VACANT/unlocked symbol is black text on white background LOCKED OCCUPIED UNLOCKED VACANT DO NOT DISTURB Indicators (180 degree visibility - for Sectional (rose) or N Escutcheon Trim) Specify L-28 N Escutcheon Indicator Description Lock Price Adjustment Inside indicators: Available for L/LV9040, 9044, 9050, 9056, 9060, 9071, 9077, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9466, 9473, 9480, 9485, 9350, 9371, 460, 462, 463, 480 L283-711 LOCKED/UNLOCKED indicator for inside of door $111.00 L283-712 VACANT/OCCUPIED indicator for inside of door 111.00 L283-713 DO NOT DISTURB indicator for inside of door 111.00 L283-714 symbols only indicator for inside of door 111.00 Outside indicators: L/LV9040, 9044, 9050, 9056, 9060, 9070, 9071, 9076, 9077, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9464, 9465, 9466, 9473, 9480, 9485, 9350, 9370, 9371, 460, 462, 463, 464 L283-721 LOCKED/UNLOCKED indicator for outside of door $111.00 L283-722 VACANT/OCCUPIED indicator for outside of door 111.00 L283-723 DO NOT DISTURB indicator for outside of door 111.00 L283-724 symbols only indicator for outside of door 111.00 Notes: 1) Indicators available in all finishes except 612 and 613 2) Indicators used on L9040/L9440 functions use screwdriver for privacy override instead of emergency key 3) Indicator option available either inside or outside of door only. 4) Cylinder and sectional indicators require additional door preparation. 5) For N Escutcheon Trim, inside indicator is not available for use when an outside coin turn is selected. 6) Indicator functions not available on Ligature Resistant Trim (SL1, SK1, HSLR) Ordering instructions: add part number under “Additional Details” section of order. EX: L9050P 06N 626 L283-711 adds indicator to the inside (thumbturn side) of lock.For Inside Indicators and lock functions requiring a thumbturn, customers ordering Sectional Trim with a door thickness greater than 3 3/4" (EE) or 2 1/2" (EI) will will receive the larger ADA thumbturn (09-509 x L583-363). Customers ordering Escutcheon Trim with a door thickness greater than 3 1/4" (EE) or 2" (EI) will will receive the larger ADA thumbturn (09-509 x L583-363). Any thumbturns ordered in 612 or 613 finish will also receive the larger ADA thumbturn as standard. Tamper Resistant Torx® Screws Specify Description Torx screws - compatible with armor, strike, rose trim, thumbturns, Torx Screws L escutcheon trim (1 3/4" doors only) Torx Screws + XL11-8486 Torx screws for armor, strike, and N escutcheon trim (1 3/4" doors only) Ordering instructions: include in order under “Additional Details”. Lock Price Adjustment $22.90 Tactile Warning Specify ‘8’ lever prefix Description Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17, 18, M51, M52, M81, ME1, ME2, ME3 lever designs Ordering instructions: Preface lever design code with 8. EX - 803, for 03, 806 for 06, 851 for M51, etc. Lock Price Adjustment $49.20 Optional Thumbturn Specify Description L583-363 Large ADA thumbturn option Lock Price Adjustment L583-231 Basic Thumbturn option N/C L583-363 Available w/ all thumbturn functions except L9463 and L463. L583-363 and L583-231 not available with ligature-resistant knob (SK1) or lever (SL1) or HSLR trim. Ordering instructions: include in order under “Additional Details”. Folger Adam Co® Lever Trak™ Specify Description 503 Lever Design Modified inside and outside 03 lever for Folger Adam Co. ® Lever Trak™. Available rose trim only, not available 629 or 630 finish. Lock Price Adjustment Ordering instructions: Specify lever design as 503. Price Book 8 192 Effective April 4, 2020 • Rev. 04/20 $108.00 Special Functions, Antimicrobial Coating, Lead Lining, RX Options • L Special Options Description Lock Price Adjustment XL11-422 Nylon latchbolt insert, for use with electric strikes $110.00 XL11-446 L9040 with thumbturn both sides (not available with N escutcheon trim) 462.00 XL11-543 L9482 (L9082 with deadbolt) XL11-557 L9485 prison function lock. Latch retracted by key outside or knob inside. Outside knob always free spinning. Deadbolt only thrown or retracted by guard’s key. Inside knob becomes fixed when deadbolt thrown. Prisoner’s key only retracts latchbolt. Furnished standard with Torx® screws. Available with L escutcheon and rose (sectional) trim only. Only available with knob. XL11-635 L9460 with fixed double dummy trim XB11-720 L9463 or L463 with B100-series style thumbturn XL11-741 L9110 active double dummy trim XL11-743 Armor front with cutout to receive deadbolt only, for use with dummy functions XL11-886 L9460 with trim. Inside knob or lever retracts deadbolt. Outside knob or lever fixed. L9456 +402.00 XL11-886 L9462 with trim. Inside knob or lever retracts deadbolt. Outside knob or lever fixed. L9082 + 428.00 XL11-886 L9464 with trim. Inside knob or lever retracts deadbolt. Outside knob or lever fixed. L9456 +402.00 XL11-907 L9412 exit lock with deadbolt for escutcheon designs only. If Rose trim required please order L9480 rose trim less outside cylinder. L9080 +389.00 XL11-897 L9066 storeroom lock, latchbolt retracted by key either side L9060 + 457.00 M ORTISE Specify L9082 + 614.00 727.00 L9456+402.00 211.00 L9010 +304 136.00 L-29 Ordering instructions: Add XL/XB number under “Additional Details” section of order. Antimicrobial Coating Specify Description Lock Price Adjustment 626AM or 630AM Rose Trim: Adds silver-ion based antimicrobial coating to inside lever, bushing, rose & thumbturn and outside lever, bushing, rose, cylinder ring, and cylinder faceplate 626AM or 630AM Escutcheon Trim: Adds silver-ion based antimicrobial coating to inside lever, bushing, escutcheon & thumbturn and outside lever, bushing, escutcheon, and cylinder face plate $52.40 Ordering instructions: Specify finish as either 626AM or 630AM. HSLR Trim not available with Antimicrobial Coating. Lead Lining Specify Description Lock Price Adjustment XL11-515 xx Lead lining, 1/8" thick installed on L9000 mortise lock case cover. Specify handing (xx) as RH, RR, LH, LR XL12-216 xx Lead lining, 1/8" thick installed on L400 mortise deadbolt case cover. Specify handing (xx) as RH, RR, LH, LR $522.00 Ordering instructions: add lock handing and appropriate XL # to order. EX: L9050P 03A 626 RH XL11-515 (L9050P, 03A trim, 626, Right Handed, Lead Lining). Request to Exit (RX), Latchbolt Monitor (LX), Door Position Sensor (DPS), Deadbolt Monitor (DM) Specify Description Lock Price Adjustment L909x and L949x Electrified Mortise Options + specified mechanical functions RX Request to Exit (available all L/LV909x and L/LV949x electrified + L/LV9010/50/56/70/71/80 and L9453/56/58/65/66/80/85 mechanical functions) LX Latchbolt Monitor (available all L909x and L949x electrified + L9010/50/56/70/71/80/82 and L9453/56/65/66/80/85 mechanical functions) DPS Door Position Sensor (available L909x electrified + L9010/80/82 mechanical functions) DM Deadbolt Monitor (available L949x electrified + L9453/56/ 57/58/80/85/86/96 mechanical functions) $193.00 Ordering instructions: include in order under “Additional Details”. Price Book 8 Effective April 4, 2020 • Rev. 04/20 193 L • Distributor Pack Program MORTISE Features The Schlage Distributor Pack stocking program provides “flexible inventory” for the L-Series mortise lock. The Distributor Pack combines the versatile Schlage mortise lock with a variety of knob or lever options and finishes all for the same list price as a complete lockset. This allows you to maximize your mortise lock inventory dollars and meet your changing customer requirements. The Distributor Pack is also easy to use. By combining a few different component parts, you can build a complete Schlage mortise lock. How to Build a Mortise Lock with the Schlage Distributor Pack L-30 STEP 1: Choose lock case required. Schlage mortise cases must be ordered in multiples of 10 units each. (Quantity of 1 = 1 lock case.) STEP 2: Choose the knob/lever and rose/escutcheon trim designs and finishes. Order one design and finish in multiples of 4 or 10 units each. (Quantity of 1 = 1 set of outside and inside trim.) STEP 3: Choose the armor front. (Quantity of 1 = 10 armor fronts, packed 10 to a box) STEP 4: Choose the strike. (Quantity of 1 = 10 strikes, packed 10 to a box) STEP 5: Choose the cylinder (if required). (Quantity of 1 = 10 cylinders, packed 10 to a box) These are the only component parts required to build a Schlage mortise lock. With five easy steps you can build your mortise inventory to be flexible and to respond quickly to your customers. Miscellaneous parts in bulk quantities are also available for Schlage mortise locks with the Distributor Pack Program. (See page L-32 for availability.) Product Identification Functions Available Function Description L9010B Passage L9040B Privacy L9050LB Entrance/Office L9056LB Entrance/Office w/ Auto Unlocking L9070LB Classroom L9080LB Storeroom L9082LB Institution L9453LB Entrance L9456LB Corridor L9465LB Closet/Storeroom L9473LB Dormitory/Bedroom L9480LB Storeroom with Deadbolt L9485LB Faculty Restroom Suffix B = Distributor Pack Lock Case L = Less Full Face Cylinder Available Designs and Finishes Knob/Lever Designs Rose/ Finishes Escutcheon Standard 01, 02,03, 05, 06, 07, 12, 17, 18, ACC, AST, LAT, LON, MER, STA, OME A, B, C or L M Collection M51, M52, M53, M54, M55, M56, M57, M62, M62, M63, M81, M82, M83, M84, M85, ME1, ME2, ME3 Price Book 8 194 Effective April 4, 2020 • Rev. 04/20 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e (not all lever designs available in each finish, see product tables for exact list) Distributor Pack Program • L Lock Cases STEP 1 - LOCK CASES (order in multiples of 10) Part Number Description Price Each Standard (non-Vandlgard) lock cases Passage $148.00 Privacy 219.00 L9050LB Entrance/office 240.00 323.00 L9056LB Entrance/office with auto unlocking L9070LB Classroom L9080LB Storeroom L9082LB Institution L9090LB Electrified chassis for L9090/L9092/L9094 functions. Specify EL or EU* L9091LB Electrified chassis for L9091/L9093/L9095 functions. Specify EL or EU* L9453LB Entrance/office with deadbolt L9456LB Corridor L9465LB Closet/Storeroom L9473LB Dormitory/Bedroom L9480LB Storeroom with deadbolt L9485LB Faculty Restroom M ORTISE L9010B L9040B 240.00 271.00 561.00 L-31 271.00 Vandlgard lock cases LV9040B Privacy $322.00 LV9050LB Entrance/office 345.00 426.00 LV9056LB Entrance/office with auto unlocking LV9070LB Classroom LV9080LB Storeroom LV9090LB Electrified chassis for L9090/L9092/L9094 functions. Specify EL or EU* LV9091LB Electrified chassis for L9091/L9093/L9095 functions. Specify EL or EU* 345.00 LV9082LB Institution LV9453LB Entrance/office with deadbolt LV9456LB Corridor LV9480LB Storeroom with deadbolt LV9485LB Faculty Restroom Notes 666.00 376.00 Lock cases furnished with mounting screws and templates only Lock cases furnished right hand only *Electrified locks not specified as EL or EU will ship EU Order instructions: Order part number in quantities of 10 Price Book 8 Effective April 4, 2020 • Rev. 04/20 195 L • Distributor Pack Program Trim Packs STEP 2 - Trim Packs (Knob/Lever and Rose/Escutcheon) (order in multiples of 4 or 10) Standard levers with A or B roses MORTISE 03 06 07 12I 17 OME 03 06 07 12I 17 OME 6: 01, 02, 05, 18, 41, 42, LAT*, LON* ACCI†, ASTI†, MERI† *not avail 612, 613 †not avail 612, 613, 629, 630 Finishes 626 626 605 606 609 612 619 622 625 643e 613 629 630 Part Number Knob/Lever design with rose for use with 09-454 L9010, L/LV9070, L/LV9080, L/LV9090, L /LV 9091, L /LV 9092, L /LV 9093, L /LV 9094, L /LV 9095, L9465 $390 $500 $512 $530 09-455 L/LV9040 400 510 522 540 09-456 L/LV9050, L/LV9056, L/LV9456, L9473, L/LV9480, L/LV9485 391 501 513 531 Decorative levers with A or B roses L-32 Standard Lead time: M51, M52, M81 6: M54, M56, M61I, M63I, M83, M84, M85 6: Available 05/2014: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3 † Available 629 and 630 only Finishes Part Number Knob/Lever design with rose for use with 09-454 L9010, L/LV9070, L/LV9080, L9090, L /LV 9091, L /LV 9092, L /LV 9093, L /LV 9094, L /LV 9095, L9465 $530 09-455 L/LV9040 540 09-456 L/LV9050, L/LV9056, L/LV9456, L9473, L/LV9480, L/LV9485 531 605, 606, 609, 619, 622, 625, 626, 629, 630, 643e Standard Levers with L or N Escutcheons 03 06 07 12I 17 OME 6: 01, 02, 05, 18, 41, 42, LAT*, LON* ACCI†, ASTI†, STAI†, MERI† *not avail 612, 613 †not avail 612, 613, 629, 630 Finishes Part Number Knob/Lever design with rose for use with 09-446 L9010, L /LV 9090, L /LV 9091 09-447 L/LV9040 09-449 L/LV9070, L/LV9080, L /LV 9092, L /LV 9093, L9465 09-451 L/LV9050, L/LV9056, L/LV9453, L/LV9473, L/LV9480, L/LV9485 626 605 606 609 612 619 622 625 643e 613 629 630 $546 $558 $576 576 588 606 556 568 586 Decorative Levers with L or N Escutcheons Standard Lead time: M51, M52, M81 6: M54, M56, M61I, M63I, M83, M84, M85 6: Available 05/2014: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3 † Available 629 and 630 only Finishes Part Number Knob/Lever design with rose for use with 09-446 L9010, L /LV 9090, L /LV 9091 $576 09-447 L/LV9040 606 09-449 L/LV9070, L/LV9080, L /LV 9092, L /LV 9093, L9465 09-451 L/LV9050, L/LV9056, L/LV9453, L/LV9473, L/LV9480, L/LV9485 Notes 605, 606, 609, 619, 622, 625, 626, 629, 630, 643e 586 Split designs/finishes are not available Includes mounting screws, mounting plates, spring cages, L mounting posts, and strike boxes. For additional vandal resistance, order Vandlgard mounting posts on page L-32. Components are for 1 3/4" thick doors only. Concealed cylinder escutcheons are not available in the distributor pack program. Order instructions: Specify part number, lever design + rose/escutcheon design, finish, handing if required. EX: 09-446 M61L, 626, RH. Order in quantities of 10. Price Book 8 196 Effective April 4, 2020 • Rev. 04/20 Distributor Pack Program • L Armor Fronts, Strikes, Cylinders STEP 3 - Armor Fronts (part numbers listed are boxes of 10) Available Finishes 606 609 612 613 619 622 625 626 629 • • • • • • • • • • Description 630 643e • • M ORTISE Part Number 605 Price per box of 10 1 1/4" Wide (Standard armor size for 1 3/4" and larger door thicknesses) 09-473 10 each 09-662 latch only armor for L9010, L/LV9040 09-474 10 each 09-663 Latch x aux latch for L/LV9050, L/LV9056, L/LV9070, L/LV9080, L/LV9082, L/LV9090/91/92/93/94/95* 09-475 10 each 09-664 Latch x deadbolt for L/LV9456, L9465, L9473 09-477 10 each 09-666 latch x aux latch x deadbolt for L/LV9453, L/LV9480, L/LV9485, L/LV9492/93/94/95 Notes $381.00 Includes mounting screws *For L /LV 9090/91/92/93/94/95 with DPS use distributor pack armor 09-477 Ordering instructions: Specify part number and finish. Ex: 09-473 626. Each box includes 10 armor fronts. Available Finishes Part Number 605 606 609 612 613 619 622 625 626 629 • • • • • • • • • • Description 630 643e • • Price per box of 10 10 each 10-072, 1 1/4" x 4 7/8" square corner strikes, no box 09-494 10 each 10-072 strikes with 1" lip 09-494 1316 10 each 10-072 strikes with 1 3/16" lip 09-494 112 10 each 10-072 strikes with 1 1/2" lip Notes $232.00 strike box included with distributor pack trim set Ordering instructions: Specify part number and finish. Ex: 09-494 1316 626. Each box includes 10 strikes. STEP 5 - Cylinders (part numbers listed are boxes of 10) Available Finishes Part Number 605 606 609 612 613 619 622 625 626 629 • • • • • • • • • • Description 630 643e • • Price per box of 10 For use with L9060 keyed functions only 09-484 118 10 each 20-001 cylinders with 1 1/8" cylinder length (use with rose trim on 1 3/8" -2" thick doors or escutcheon trim on 1 3/8" thick doors) 09-484 114 10 each 20-001 cylinders with 1 1/4" cylinder length (use with escutcheon trim on 1 3/4" thick doors) 09-484 138 10 each 20-001 cylinders with 1 3/8" cylinder length (use with escutcheon trim on 2" thick doors) $880.00 For use with all keyed functions other than L9060 09-485 118 10 each 30-001 cylinders with 1 1/8" cylinder length (use with rose trim on 1 3/8" -2" thick doors or escutcheon trim on 1 3/8" thick doors) 09-485 114 10 each 30-001 cylinders with 1 1/4" cylinder length (use with escutcheon trim on 1 3/4" thick doors) 09-485 138 10 each 30-001 cylinders with 1 3/8" cylinder length (use with escutcheon trim on 2" thick doors) Notes $880.00 Cylinders are C keyway, 6 pin cylinder keyed 5, 0 bitted, and furnished with two 5-pin 0-bitted keys Ordering instructions: Specify part number and finish. Ex: 09-485 114 619. Each box includes 10 cylinders with compression springs and blocking rings. Price Book 8 Effective April 4, 2020 • Rev. 04/20 197 L-33 STEP 4 - Strikes (part numbers listed are boxes of 10) L • Parts Miscellaneous Parts Miscellaneous Distributor Pack Parts: Escutcheon thru-bolts MORTISE Available Finishes Part Number 605 606 609 612 613 619 622 625 626 629 • • • • • • • • • • Description 630 643e • • Price per box of 50 Box of 50 L escutcheon thru bolts 09-483 138 L escutcheon thru-bolts for 1 3/8" thick doors 09-483 134 L escutcheon thru-bolts for 1 3/4" thick doors 09-483 200 L escutcheon thru-bolts for 2" thick doors 09-483 214 L escutcheon thru-bolts for 2 1/4" thick doors 09-483 212 L escutcheon thru-bolts for 2 1/2" thick doors $381.00 Ordering instructions: Specify part number and finish. Ex: 09-483 134 626. Each box includes 50 thru bolts. Miscellaneous Distributor Pack Parts: Mounting Posts & Mounting Screws L-34 Available Finishes Part Number 605 606 609 612 613 619 622 625 626 629 • • • • • • • • • • Description 630 643e • Price per box of 50 Mountings posts for Standard L functions (box of 50) 09-488 138 L escutcheon thru-bolts for 1 3/8" thick doors 09-488 134 L escutcheon thru-bolts for 1 3/4" thick doors 09-488 200 L escutcheon thru-bolts for 2" thick doors 09-488 214 L escutcheon thru-bolts for 2 1/4" thick doors 09-488 212 L escutcheon thru-bolts for 2 1/2" thick doors $600.00 Mountings posts for LV Vandlgard functions (box of 50). Contact Technical Support Mounting Screws (box of 100) 09-493 $42.80 100 each mounting screw L583-066 Ordering instructions: Specify part number Ex: 09-488 200 626. Electrified Distributor Pack Parts: RX Modules and Solid Spindles Part Number Description List Price L283-412 10 pack RX modules p/n L283-452 $1,544.00 L283-450 10 pack solid spindle and spring p/n L283-054 (for use with L9091, L9093, L9095 only; supports 1 3/8" - 3" door thickness) Price Book 8 198 Effective April 4, 2020 • Rev. 04/20 38.60 • Parts • L Levers & Knobs, Roses, Escutcheons Levers & Knobs 605 606 609 612 Style Lever & Knob Design Standard 016, 026, 03*, 056, 06, 07, 12I, 17, 18, 416, 426, OME6 • • • • • • M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, M856I, ME16I, ME26I, ME36 • • • LAT6, LON6 Decorative 613 619 622 625 626 629 630 643e • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • M576I, M626I M ORTISE ACCI, ASTI, MERI • • • 6Extended Factory Lead Time Ispecify handing Part Number Description 09-401 Outside lever, retaining clip, insertion tool 09-402 Inside lever+bushing, mounting plate, screw pack, spanner wrench * ** Standard Levers Decorative Levers $186 $201 Available modified for Folger Adam Co.® Lever Track™. Specify 503 design and add $54.00. Not available in 629 or 630 finish. Knobs and levers default for 1 3/4" doors. Knobs also available for 1 3/8" doors, levers for 1 3/8", 2", 2 1/4" and 2 1/2" doors. Ordering instructions: Specify part number, lever style, finish, door thickness if not 1 3/4". Ex: 09-401 03 626. Roses Rose Design Standard A, B, C Decorative MER, AVA Part Number Description 09-403 Inside Rose (includes mounting plate and screws) 09-404 Outside Rose+Bushing 09-508 Blank Outside Rose (not available MER or AVA) • • • • • • 613 619 622 625 626 629 630 643e • • • • • • • • • • • • • • Standard and Decorative $105.00 Ordering instructions: Specify part number, lever design + rose, finish. Ex: 09-404 03A 626. Lever design must be specified for proper bushing. Escutcheons 605 606 609 612 Available finishes Part Number • • • • L Escutcheon Description 613 619 622 625 626 629 630 643e • • • • • • • • N Escutcheon Outside Escutcheon & Bushing 09-614 O/S (add finish) 00L Escutcheon x Full Face Cylinder $186 09-615 O/S 630 00L Escutcheon Blank x Concealed Cylinder 186 09-636 Blank x lever or knob 09-637 Emergency turn x lever or knob 09-638 Concealed cylinder x lever or knob 09-639 Full face cylinder x lever or knob 186 186 Inside Escutcheon 09-632 Blank x lever or knob 09-633** Thumbturn x lever or knob 09-634** Thumbturn x blank 09-635 Full face cylinder x lever or knob 09-642 ADA thumbturn for N escutcheon, no lever/knob included (standard door range)1 09-548 ADA thumbturn for L escutcheon, no lever/knob included (standard door range)1 09-549 ADA thumbturn for L escutcheon, no lever/knob included. Used with 2" to 2.5" thick doors. L583-187 186 186 186 186 Concealed cylinder x lever or knob ** 1 Specify door thickness: 1 3/8" or 1 3/4" Not available in 612 or 613 finish. Ordering instructions: Specify part number, lever + escutcheon style, finish. Ex: 09-639 03L 626 (full face cylinder, 03 lever, L escutcheon, 626 finish). Price Book 8 Effective April 4, 2020 • Rev. 04/20 199 L-35 605 606 609 612 Style L • Parts Outside Lever/Knob Assemblies Outside Lever/Knob and Rose/Escutcheon Assemblies 605 606 609 612 Style Lever & Knob Design Standard 016, 026, 03, 056, 06, 07, 12I, 17, 18, 416, 426, OME6 MORTISE LAT6, LON6 ACCI, ASTI, MERI Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, M856I, ME16I, ME26I, ME36 • • • • • • • • • • • • 613 619 622 625 626 629 630 643e • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • M576I, M626I 6Extended Factory Lead Time Ispecify handing Part Number Description Standard Levers Decorative Levers $207 $222 207 N/A 275 290 With A, B or C rose 09-506 Outside Lever assembly With Avanti or Merano Rose L-36 09-655 Outside lever assembly for AST w/Avanti rose or MER w/Merano rose only With L or N Escutcheon 09-550 Blank 09-551 Emergency turn 09-552 Concealed cylinder (L escutcheon only) 09-553 Full face cylinder Ordering instructions: Specify part number, lever style, rose/escutcheon, finish. Ex: 09-506 M53A 626 (outside assembly, M53 lever, A rose, 626 finish). Price Book 8 200 Effective April 4, 2020 • Rev. 04/20 Parts • L Armor Fronts & Strikes Armor Fronts, L9000 & L400-Series 605 606 609 612 Available Finishes Part Number • • • • 613 • Description 619 622 625 626 629 630 643e • • • • • • • Price Each 09-662 Latch only (L9010, L9040, L9044) 09-713 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082, L/ LV9090/91/92/93/94/95*) Latch x aux latch (L9076, L9077) 09-664 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496) 09-665 Deadbolt (L9460, L9462, L9463, L9464) 09-666 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486, L9492/93/94/95) 09-717 Deadbolt armor (L460, L462, L463, L464, L480, L496) 09-663 M ORTISE 1 1/4" Wide (Standard armor size for 1 3/4" and larger door thicknesses) 09-661 Blank (L9175, L9176) $38.10 1 1/16" Wide (armor size for doors thinner than 1 3/4", including 1 3/8" doors) Blank (L9175, L9176) 09-668 Latch only (L9010, L9040, L9044) Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082L9090/91/92/93/94/95*) 09-718 Latch x aux latch (L9076, L9077) Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496, 09-670 L9492/93/94/95) 09-671 Deadbolt (L9460, L9462, L9463, L9464) 09-672 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486) *For L9090/91/92/93/94/95 models with DPS, use armor 09-666 (1 1/4" wide) or 09-670 ( 1 1/16 wide) Ordering instructions: Specify part number and finish. Ex: 09-662 626. L-37 09-667 09-669 10-072 L9000 Standard 10-073 L9000 Deadbolt Standard 10-079 L400 Deadbolt Standard 10-078 38.10 10-091 10-144 10-145 Strikes, L9000 and L400 Series 605 606 609 612 Available Finishes • Part Number Description Strikes, L9000 Series 10-072 1316 1 1/4" x 4 7/8" square corner strike + box. 1 3/16" lip length , standard L9000 strike 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 7/8", 1" or 1 1/2" 10-072 xx 10-072 xx 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 1 3/4" or 2" 10-073 Deadbolt lock strike, standard for L9460, L9462, L9463 and L9464 10-075 1/2" rabbeted strike (for 1 3/4" doors, use with 1 1/16" armor front. Use 1 1/4" armor front for over 1 3/4"-2 1/4" doors extended equally) 10-091I 1 1/4" x 8" square corner armor strike, no box. Specify handing to inactive door 10-144 One hole strike for latching functions LH/RHR for SK1, SL1 and HSLR trim 10-145 One hole strike for latching functions RH/LHR for SK1, SL1 and HSLR trim K510-066 Strike box (finish not applicable) 37-015 Door frame strike reinforcer (finish not applicable) Strikes, L400 Series 10-078 1 1/4" x 4 7/8" square corner strike + box, 1 1/8" x 3 1/2" square corner strike + box, ANSI 115.5 prep , standard L400 strike 10-079 K510-053 Strike box for 10-079 strike (finish not applicable) K510-066 Strike box for 10-078 strike (finish not applicable) Ordering instructions: Specify part number, lip length if required, and finish. Ex: 10-072 1316 626. • • • 613 • 619 622 625 626 629 630 643e • • • • • • • Price Each $23.20 23.20 59.20 28.20 152.00 104.00 44.00 7.00 25.80 $23.30 7.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 201 L • Parts L-38 MORTISE K510-330 Buttons, Thumbturns, Coin Turns, Cylinder Turns 09-544 ADA Thumbturn Standard1 09-509 Basic Thumbturn 09-509 L283-124 w/ Large ADA Thumbturn (L583-363) 09-900 Emergency Button, Thumbturns, Coin Turns & Cylinder Turns 605 606 609 612 613 619 622 625 626 629 630 643e Available Finishes Part Number Description Emergency Button & Emergency Turn Tool K510-330 Emergency Button, L9040 and L9440 L583-233 Emergency turn tool for L9040 and L9440. Specify finish as 458. Basic Thumbturns (Optional) 09-509 027 Basic Thumbturn for sectional trim, 1 3/8"- 1 7/8" door range, extended equally 09-509 033 Basic Thumbturn for sectional trim, >1 7/8"- 2 3/8" door range, extended equally 09-509 040 Basic Thumbturn for sectional trim, >2 3/8"- 2 7/8" door range, extended equally 09-509 047 Basic Thumbturn for sectional trim, >2 7/8"- 3 5/8" door range, extended equally ADA Thumbturns for Sectional Trim 09-544 027 ADA Thumbturn for sectional trim, 1 3/8"- 1 7/8" door range, extended equally1 09-544 033 ADA Thumbturn for sectional trim, >1 7/8"- 2 3/8" door range, extended equally1 09-544 040 ADA Thumbturn for sectional trim, >2 3/8"- 2 7/8" door range, extended equally1 09-544 047 ADA Thumbturn for sectional trim, >2 7/8"- 3 5/8" door range, extended equally1 Note: L583-363 Suffix Coin Turns L283-124 19 L283-124 23 L283-124 25 L283-124 31 L283-124 37 L283-124 43 L283-124 48 L283-056 19 L283-056 23 L283-056 25 L283-056 31 L283-056 37 L283-056 43 L283-056 48 1 • • • • • • • • • • Price Each $15.70 19.70 73.20 $73.20 Not available in 612 or 613 finishes. For 612 or 613 finishes, use Large ADA thumbturn 09-500 x L583-363. Also specify 09-509 x L583-363 for thick door applications. Large ADA thumbturn upgrade, specify thumbturn p/n + L583-363 Coin turn, L9044 and L9444, 1 3/8" - 1 1/2" door range, extended equally (EE) Coin turn, L9044 and L9444, 1 5/8" - 1 7/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >1 7/8" - 2 1/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >2 1/8" - 2 5/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >2 5/8" - 2 7/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >2 7/8" - 3 3/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >3 3/8" - 3 5/8" door range, extended equally (EE) Coin turn w/ torx screws, L9044 and L9444, 1 3/8" - 1 1/2" door range, EE Coin turn w/ torx screws, L9044 and L9444, 1 5/8" - 1 7/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >1 7/8" - 2 1/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >2 1/8" - 2 5/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >2 5/8" - 2 7/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >2 7/8" - 3 3/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >3 3/8" - 3 5/8" door range, EE EE = Extended Equally Note: Coin turns not available in 612 or 613 finish Cylinder Turns I 09-487 xx Cylinder coin turn, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" (replaces XL12-196) 09-900 xx Cylinder turn, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 09-900 xx Cylinder turn, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 09-905 Cylinder turn w/ compression ring and 1/8" blocking ring for 1 3/4" doors I Specify door hand for cylinder turns if used with L463 or L9463. Note: Cylinder turns not available in 629 or 630 finish Price Book 8 202 • Effective April 4, 2020 • Rev. 04/20 Add $17.30 to 09-509 price 127.00 138.00 $128.00 125.00 190.00 135.00 198.00 146.00 • Parts • L Occupancy Indicators Sectional Indicator N Escutcheon Indicator Available Messages LOCKED/OCCUPIED/DO NOT DISTURB/ lock symbol is white text on red background UNLOCKED/VACANT/unlocked symbol is black text on white background LOCKED OCCUPIED UNLOCKED VACANT DO NOT DISTURB Note: Addition of indicator may require additional door preparation. See installation instructions on-line for details Ordering Instructions: Specify part number and finish. EX: L283-437 L583-363 626 for N Esctuchen Locked/Unlocked indicator w/ ADA thumbturn in 626. Outside escutcheon indicators also require lever design EX: L283-441 03 626 for N escutcheon cointurn indicator with 03 lever in 626 finish . Only available for doors up o 2-1/4" thick EE. Parts L583-709 L583-710 L583-711 L583-712 L283-561 L283-629 L283-736 L583-717 L583-752 Message sign, LOCKED/UNLOCKED, for 180 degree indicator Message sign, OCCUPIED/VACANT, for 180 degree indicator Message sign, DO NOT DISTURB/blank, for 180 degree indicator Message sign, symbols only, for 180 degree indicator Cam and retaining ring kit, 180 degree indicator, cylinder and privacy indicators Cam and retaining ring kit, for thumbturn and cointurn Screw pack consisting of (2)L583-579 Mounting Plate Screws, (2)L583-899 Mounting Plate Screws, and (2)L583-755 Trim Screws(specify finish) Sectional mounting plate, cylinder indicator Sectional mounting plate, coin/privacy/thumbturn indicator $31.00 4.00 4.00 19.90 49.40 49.40 Price Book 8 Effective April 4, 2020 • Rev. 04/20 203 L-39 605 606 609 619 622 625 626 629 630 643e Part Number Description • • • • • • • • • • Sectional trim - cylinder trim, for inside or outside of door Indicator, Sectional, Cylinder - LOCKED/UNLOCKED L283-413 L283-414 Indicator, Sectional, Cylinder - OCCUPIED/VACANT $111.00 L283-415 Indicator, Sectional, Cylinder - DO NOT DISTURB L283-416 Indicator, Sectional, Cylinder - symbols only Sectional trim - thumbturn, for inside of door Indicator, Sectional, Thumbturn - LOCKED/UNLOCKED L283-417 L283-418 Indicator, Sectional, Thumbturn - OCCUPIED/VACANT $111.00 L283-419 Indicator, Sectional, Thumbturn - DO NOT DISTURB L283-420 Indicator, Sectional, Thumbturn - symbols only Sectional trim - cointurn, for outside of door L283-421 Indicator, Sectional, Cointurn - LOCKED/UNLOCKED L283-422 Indicator, Sectional, Cointurn - OCCUPIED/VACANT $111.00 L283-423 Indicator, Sectional, Cointurn - DO NOT DISTURB L283-424 Indicator, Sectional, Cointurn - symbols only Sectional trim - privacy, for outside of door (NOTE: emergency override by small screwdriver, not emergency key) Indicator, Sectional, Privacy - LOCKED/UNLOCKED L283-425 L283-426 Indicator, Sectional, Privacy - OCCUPIED/VACANT $111.00 L283-427 Indicator, Sectional, Privacy - DO NOT DISTURB L283-428 Indicator, Sectional, Privacy - symbols only Escutcheon trim - cylinder trim, for inside of door L283-433 Indicator, N Escutcheon, Inside Cylinder - LOCKED/UNLOCKED L283-434 Indicator, N Escutcheon, Inside Cylinder - OCCUPIED/VACANT $254.00 L283-435 Indicator, N Escutcheon, Inside Cylinder - DO NOT DISTURB L283-436 Indicator, N Escutcheon, Inside Cylinder - symbols only Escutcheon trim - thumbturn trim, for inside of door L283-437 Indicator, N Escutcheon, Thumbturn - LOCKED/UNLOCKED L283-438 Indicator, N Escutcheon, Thumbturn -OCCUPIED/VACANT $254.00 L283-439 Indicator, N Escutcheon, Thumbturn - DO NOT DISTURB L283-440 Indicator, N Escutcheon, Thumbturn - symbols only Escutcheon trim -cylinder trim, for outside of door. (NOTE: Available 626 or 630 finish, with 03, 06, or 17 levers. Other levers/finishes require extended leadtimes.) L283-429 Indicator, N Escutcheon, Outside Cylinder - LOCKED/UNLOCKED L283-430 Indicator, N Escutcheon, Outside Cylinder - VACANT/OCCUPIED $341.00 L283-431 Indicator, N Escutcheon, Outside Cylinder - DO NOT DISTURB L283-432 Indicator, N Escutcheon, Outside Cylinder - symbols only Escutcheon trim -cointurn, for outside of door. (NOTE: Available 626 or 630 finish, with 03, 06, or 17 levers . Other levers/finishes require extended leadtimes.) L283-441 Indicator, N Escutcheon, Cointurn - LOCKED/UNLOCKED L283-442 Indicator, N Escutcheon, Cointurn - VACANT/OCCUPIED $341.00 L283-443 Indicator, N Escutcheon, Cointurn - DO NOT DISTURB L283-444 Indicator, N Escutcheon, Cointurn - symbols only Escutcheon trim -privacy, for outside of door. (NOTE: Available 626 or 630 finish, with 03, 06, or 17 levers. Other levers/finishes require extended leadtimes.) L283-445 Indicator, N Escutcheon, Privacy - LOCKED/UNLOCKED L283-446 Indicator, N Escutcheon, Privacy - VACANT/OCCUPIED $341.00 L283-447 Indicator, N Escutcheon, Privacy - DO NOT DISTURB L283-448 Indicator, N Escutcheon, Privacy - symbols only Optional Thumbturns for Escutcheon Trim L583-363 suffix Large ADA thumbturn upgrade; specify indicator w/ thumbturn p/n + L583-363 Add $17.30 to price M ORTISE Occupancy Indicators - 180 degree visibility (for Sectional (rose) or N Escutcheon trim) Parts • L Thru-Bolts, Mounting Posts, Springs & Spindles MORTISE Occupancy Indicator - “old style” (for Sectional (rose) trim) Available Finishes Part Number Description 09-611 "Do Not Disturb" occupancy indicator for rose trim. Includes driver bar L583-245 09-611 L583-375 "Occupied" occupancy indicator for rose trim. Includes driver bar L583-245 09-611 XL11-986 "Locked" occupancy indicator for rose trim. Includes driver bar L583-245 L583-245 Occupancy indicator driver bar Ordering instructions: Specify part number and finish. Ex: 09-611 L583-375 626 Escutcheon Thru-Bolts • Part Number Description L Escutcheon Thru-bolts: two required per lock L583-119 L escutcheon thru bolts for 1 3/8" door thickness L583-120 L escutcheon thru bolts for 1 3/4" door thickness L583-121 L escutcheon thru bolts for 2" door thickness L583-122 L escutcheon thru bolts for 2 1/4" door thickness L583-123 L escutcheon thru bolts for 2 1/2" door thickness L583-287 L escutcheon mounting screws for L9175 half-dummy function N Escutcheon Thru-Bolts: two required per lock K510-389 N escutcheon thru bolts for 1 3/4" door thickness K510-390 N escutcheon thru bolts for 2" to 2 1/4" door thickness L583-133 N Escutcheon mounting screws for L0170 single dummy function Ordering instructions: Specify part number and finish. Ex: L583-120 626. • • • • • • • • • • Price Each $117.00 138.00 5.90 • Mounting Posts (Ferrules) Part Number Description L Mounting Posts (Ferrules): two required per lock L583-211 Mounting post for 1 3/8" door thickness L583-212 Mounting post for 1 3/4" door thickness L583-213 Mounting post for 2" door thickness L583-214 Mounting post for 2 1/4" door thickness L583-215 Mounting post for 2 1/2" door thickness L583-216 Mounting post for 2 3/4" door thickness L583-217 Mounting post for 3" door thickness L583-218 Mounting post for 3 1/4" door thickness L583-219 Mounting post for 3 1/2" door thickness LV Mounting Posts (Ferrules): two required per lock L583-497 LV mounting post for 1 3/4" door thickness L583-498 LV mounting post for 2" door thickness L583-499 LV mounting post for 2 1/4" door thickness L583-500 LV mounting post for 2 1/2" door thickness L583-501 LV mounting post for 2 3/4" door thickness L583-502 LV mounting post for 3" door thickness L583-503 LV mounting post for 3 1/4" door thickness L583-504 LV mounting post for 3 1/2" door thickness Ordering instructions: Specify part number. • • • • • • Price Each $6.40 7.50 5.70 7.50 0.96 Price Each $12.10 30.90 $25.30 33.40 Spindle & Springs Part Number Description Spindle & Spring Kits (qty two each) L283-198 Spindles and springs for 1-3/8" - 1 7/8" doors L283-199 Spindles and springs for 2" - 3 1/2" doors Spindles & Springs (qty one each) L283-060 Spindle and spring for 1 3/8" - 1 7/8" doors (two required per lock) L283-061 Spindle and spring for 2" - 3 1/2" doors (two required per lock) L283-064 Spindle and spring, L0172, L9091/93/95, L9493/95 (one required per lock) L283-065 Spindle and spring, L0170 half dummy (one required per lock) Ordering instructions: Specify part number. Price Book 8 204 • 605 606 609 612 613 619 622 625 626 629 630 643e Available Finishes L-40 605 606 609 612 613 619 622 625 626 629 630 643e Effective April 4, 2020 • Rev. 04/20 Price Each $16.50 19.40 $8.20 10.20 14.50 7.70 • • • • • Parts • L L Lock Cases Lock Cases Part Number L283-039 L283-062 L283-132 L283-133 L283-134 L283-137 L283-138 L283-139 L283-140 L283-144 L283-145 L283-146 L283-310 L283-314 L283-316 L283-750 Vandlgard (LV) Lock Cases Part Number L283-601 L283-602 L283-603 L283-604 L283-605 L283-606 L283-607 L283-608 L283-609 L283-610 L283-611 L283-612 L283-614 Lock Function and Description LV9050, Office and Inner Entry Lock LV9060, Apartment Entrance Lock LV9070, Classroom Lock LV9071, Classroom Security Lock LV9040, Bath/Bedroom Privacy Lock LV9044, Privacy Lock With Coin Turn Outside LV9076, Classroom Holdback Lock LV9077, Classroom Security Holdback Lock LV9080, Storeroom Lock LV9453, Entrance Lock LV9456, Corridor Lock LV9457, Classroom Security Lock LV9496, LV9486 Lock With “OCCUPIED” Indicator LV9480, Storeroom Lock With Deadbolt LV9485, Faculty Restroom LV9486, Faculty Restroom w/“Do Not Disturb” Indicator LV9056, LV9050 Lock With Simultaneous Retraction LV9440, Privacy Lock With Deadbolt LV9444, Privacy Lock With Deadbolt and Coin Turn Outside LV9082, Institution Lock LV9482, Institution Lock with Deadbolt LV9458, Classroom security w/ deadbolt and aux latch LMV9350, Office and Inner Entry LMV9370, Classroom LMV9371, Classroom Security LMV9380, Storeroom $396.00 347.00 234.00 396.00 228.00 333.00 396.00 396.00 433.00 579.00 299.00 433.00 L-41 L283-141 Price Each M ORTISE L283-099 L283-126 L283-131 Lock Function and Description L9076, Classroom holdback L9077, Classroom security holdback L9440, Privacy with deadbolt L9444, Privacy with deadbolt and coin turn L460, L462, L463, L464, L480, L496, Deadbolt L9056, Entrance w/ simultaneous retraction L9010, Passage L9040, Privacy L9044 Privacy with Coin turn L9050, Office L9060, Apartment entrance L9070, Classroom L9071, Classroom security L9080, Storeroom L9026 Exit Lock with Cylinder L9453, Entrance L9456, Corridor L9457, Classroom security L9496, Privacy w/ “Occupied” indicator L9460, L9462, L9463, L9464, Deadbolt L9465, Closet L9466, Storeroom L9473, Dormitory L9480, Storeroom with deadbolt L9485, Faculty Restroom L9486, Faculty Restroom L9175, Single dummy L9176, Double dummy L9082, Institution L9458, Classroom security w/ deadbolt and aux latch LM9310, Passage LM9325, Exit LM9350, Office and Inner Entry LM9370, Classroom LM9371, Classroom Security LM9380, Storeroom L9025 Exit Lock 1) Includes lock case only. Armors, strikes, mounting screws, and cylinders must be ordered separately. Notes 2) All lock cases are shipped right hand. ® 545.00 337.00 337.00 396.00 433.00 1,229.00 1,440.00 272.00 Price Each $497.00 437.00 497.00 497.00 537.00 537.00 647.00 497.00 459.00 497.00 537.00 1,543.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 205 Parts • L L Lock Cases L-42 MORTISE Electrified Lock Cases Part Number L283-347 L283-392 L283-393 L283-479 L283-394 L283-481 L283-483 Lock Function and Description L9090/L9092/L9094 electrified chassis. Specify EL (electrically locking) or EU (electrically unlocking) L9090/92/94 electrified chassis w/ RX. Specify EL or EU operation L9090/92/94 electrified chassis w/ LX. Specify EL or EU operation L9090/92/94 electrified chassis w/ DPS. Specify EL or EU operation. L9090/92/94 electrified chassis w/ RX & LX. Specify EL or EU operation L9090/92/94 electrified chassis w/ RX & DPS. Specify EL or EU operation L9090/92/94 electrified chassis w/ RX, LX & DPS. Specify El or EU operation Price Each 716.00 908.00 908.00 908.00 1,101.00 1,101.00 1,297.00 L283-395 L283-396 L283-397 L283-480 L283-398 L283-482 L283-484 L9091/L9093/L9095 electrified chassis. Specify EL (electrically locking) or EU (electrically unlocking) L9091/93/95 electrified chassis w/ RX. Specify EL or EU operation L9091/93/95 electrified chassis w/ LX. Specify EL or EU operation L9091/93/95 electrified chassis w/ DPS. Specify EL or EU operation L9091/93/95 electrified chassis w/ RX & LX. Specify EL or EU operation L9091/93/95 electrified chassis w/ RX & DPS. Specify EL or EU operation L9091/93/95 electrified chassis w/ RX, LX & DPS. Specify EL or EU operation 716.00 908.00 908.00 908.00 1,101.00 1,101.00 1,297.00 L283-467 L283-469 L283-471 L283-473 L283-475 L9492/94 electrified chassis. Specify EL or EU operation L9492/94 electrified chassis w/ RX. Specify EL or EU operation L9492/94 electrified chassis w/ DBM. Specify EL or EU operation L9492/94 electrified chassis w/ RX & DBM. Specify EL or EU operation L9492/94 electrified chassis w/ RX, LX & DBM. Specify EL or EU operation 755.00 950.00 950.00 1,141.00 1,335.00 L283-468 L283-470 L283-472 L283-474 L283-476 L9493/95 electrified chassis. Specify EL or EU operation L9493/95 electrified chassis w/ RX. Specify EL or EU operation L9493/95 electrified chassis w/ DBM. Specify EL or EU operation L9493/95 electrified chassis w/ RX & DBM. Specify EL or EU operation L9493/95 electrified chassis w/ RX, LX & DBM. Specify EL or EU operation 755.00 950.00 950.00 1,141.00 1,335.00 Vandlgard® (LV) Electrified Lock Cases L283-597 L283-598 L283-599 L283-600 LV9090/92/94 electrified chassis. Specify EL (electrically locking) or EU (electrically unlocking) LV9091/93/95 electrified chassis. Specify EL (electrically locking) or EU (electrically unlocking) LV9492/94 electrified chassis. Specify EL (electrically locking) or EU (electrically unlocking) LV9493/95 electrified chassis. Specify EL (electrically locking) or EU (electrically unlocking) Price Book 8 206 Effective April 4, 2020 • Rev. 04/20 $821.00 821.00 860.00 860.00 Parts • L Miscellaneous Parts Miscellaneous Parts Part Number Description 36-080 O-ring, L9080 EL/EU Price Each 39-042 Plastic lock case cover for display - for locks manufactured after January, 1998 97.70 K110-550 Pack of truarc ring (1), spacer (2), knobs 9.00 K510-320 Wood plug, dummy, L0170, L0172 9.20 K510-842 Electrified lock bushing, L9080 EL/EU L283-003 Deadbolt (except L9453, L9465, L9466, L9473) 59.70 59.70 3.10 M ORTISE 1.20 L283-004 Entrance deadbolt, L9453 L283-006 Auxiliary latchbolt assembly 19.00 L283-008 Latchbolt assembly (except L9076) 59.70 L283-010 Locking link, L9076 19.30 L283-029 (2) Spacers for ANSI A115.1 metal door preparations 38.10 L283-030 Pack of 20 truarc rings, levers 22.60 20.70 L283-031 Mounting plate, inside lever L283-040 Spring cage (1 required per lever) 10.20 L283-049 Latchbolt assembly, L9076 59.40 Cylinder retainer plate and screw - for locks manufactured after April, 1994 19.00 Deadbolt, L9492, L9493, L9494, L9495 59.80 59.80 L283-075 Deadbolt, L9465, L9466, L9473 L283-112 Lock case, L9000-Series - for locks manufactured after January, 1998. 59.40 L283-127 Lock case and cover, L400-Series 85.80 L283-128 Lock case, L400-Series. See L283-127 for sellable part. L283-150 Mounting plate for inside rose trim on one side of door only L283-452 RX Module for L909x series electrified mortise L583-004 Standoff post L583-015 Latchbolt guide 3.90 L583-748 Retractor hub (2 required per lock) - replaces L583-019 4.40 L583-020 Retractor hub spacer 4.60 L583-021 Retractor lever 4.00 L583-022 Retractor rocker 3.20 L583-023 Blocking plates 3.90 L583-024 Retractor link 8.20 L583-025 Retractor crank 8.20 L583-026 Hub spring 1.50 L583-027 Fire door fuse 2.70 L583-028 Fire door catch L583-029 Turn hub L-43 L283-055 L283-676 — 41.60 194.00 2.60 3.20 20.30 L583-030 Entrance hub 16.40 L583-031 Cam follower 10.90 L583-035 Turn hub spring 3.90 L583-038 Auxiliary bar guide L583-043 Locking catch, L9080 EL/EU L583-044 Stop spring 2.00 L583-045 Locking catch (except L9080 EL/EU) 20.70 L583-047 Catch spring 4.60 L583-048 Locking link (except L9076) 4.60 L583-049 Entrance link 7.70 L583-050 Link pin 2.00 L583-051 Transfer lever 2.00 L583-053 Simultaneous retractor (except L9040 and L9056) 8.20 L583-056 Catch pin 4.00 32.40 3.10 20.20 L583-057 Spindle anchor L583-058 Simultaneous retractor, L9040, L9056 L583-063 Spring retainer, L9080 EL/EU 9.10 L583-064 Solenoid spring, L9080 EL/EU 3.00 8.70 Price Book 8 Effective April 4, 2020 • Rev. 04/20 207 Parts • L Miscellaneous Parts (continued) L-44 MORTISE Miscellaneous Parts (cont’d) Part Number L583-065 L583-066 L583-156 L583-174 L583-192 L583-196 L583-286 L583-290 L583-291 L583-321 L583-322 L583-426 L583-427 L583-454 L583-468 L583-481 L583-485 L583-490 L583-492 L583-494 L583-496 L583-760 L583-761 Description Electrified link, L9080 EL/EU Mounting plate screw (2 required per lock) Transfer lifter Holdback dog, L9076 Dog spring, L9076 Auxiliary stop Mounting bar, L0170, L0172 Mounting plate screw, knob dummy trim, L0170, L9175 Mounting plate screw, lever dummy trim, L0170, L9175 Mounting plate, inside knob Spacer for fixed levers Faceplate tab 1 1/4" - for locks manufactured after July, 1994 Faceplate tab 1 1/16" - for locks manufactured after July, 1994 Case cover screw (4 required per L9000-Series lock case; 3 required per L400-Series lock case) Dummy spindle anchor Cylinder retainer screw - for locks manufactured after April, 1994 Lock handing screw - for locks manufactured after April, 1994 Cylinder retainer - for locks manufactured after January, 1998 Cylinder retainer screw plate - for locks manufactured after April, 1994 Lock case cover, L400-Series. See L283-127 for sellable part. Lock case cover, L9000-Series - for locks manufactured after January, 1998 DPS magnet DPS magnet tray Ligature Resistant Conversion Kits - for 1-3/4" thick doors only Part Number Converts Convert to SK1 Ligature Resistant Knob 09-155 L9010, L9060, L9070, L9071, L9076, L9077, L9080, L9092EL/EU L9082, L9095EL/EU, L9176, L9457, L9458, L9465, L9466, L9482, to ligature resistant 09-156 L9050, L9056, L9412, L9453, L9456, L9460 w/ pull, L9473, L9480, L9485, to ligature resistant 09-159 L9040, L9440 to ligature resistant L9040, L9440 to ligature resistant Deadbolt conversion to Ligature Resistant 09-157 L462, L464, L9462, L9464 to ligature resistant 09-158 L460, L480, L9460 to ligature resistant Notes Price Each (2) ligature resistant knob assemblies (2) ligature resistant blocking rings $1,285.00 (2) ligature resistant knob assemblies (1) ligature resistant blocking ring (1) ligature resistant thumbturn assembly See instruction sheet (2) ligature resistant lever assemblies (1) ligature resistant blocking ring (1) ligature resistant thumbturn assembly (2) trim ferrules ligature resistant lever assemblies (1) ligature resistant thubturn assembly (1) emergency ADA turn (1) emergency button (2) trim ferrules (2) ligature resistant blocking rings (1) ligature resistant blocking ring (1) ligature resistant thumbturn assembly 1,611.00 1,611.00 (2) ligature resistant lever assemblies (2) ligature resistant blocking rings (2) trim ferrules $1,676.00 See instruction sheet 2,001.00 2,001.00 $152.00 510.00 1) For 1 3/4" doors w/ sectional trim only. 2) Available in 630 (Satin Stainless Steel) or 630AM (Satin Stainless Steel Anti-Microbial) finish only. 3) If applicable please specify “P” for (P) cylinder types, “R” for (R,J,F,T) cylinder types, and “BD” for (BD, BDC, GD, HD) cylinder types following the part number. Not available with the “L” cylinder option (lock less cylinder). Price Book 8 208 Conversion Instructions (2) ligature resistant knob assemblies (1) ligature resistant thubturn assembly (1) emergency ADA turn (1) emergency button Convert to SL1 Ligature Resistant Lever 09-138 L9010, L9060, L9070, L9071, L9076, L9077, L9080, L9092EL/EU, L9082, L9095EL/EU, L9176, L9457, L9458, L9465, L9466, L9482, to ligature resistant 09-139 L9050, L9056, L9412, L9453, L9456, L9460 w/ pull, L9473, L9480, L9485, to ligature resistant 09-189 Contents Price Each 12.60 1.40 7.60 6.40 0.62 6.30 25.30 1.50 1.50 7.60 4.00 5.50 6.30 1.50 138.00 3.00 1.90 7.40 3.60 26.60 41.30 16.20 16.20 Effective April 4, 2020 • Rev. 04/20 Parts • L Classroom Security Function Conversion Kits, Vandlegard Retrofit kit Classroom Security Function Conversion Kits Part Number Converts Contents Conversion Instructions Price Each Rose Trim L9070P to L9071P L9076P to L9077P (1) 30-001-118 Cylinder (2) 36-082-018 Blocking Ring Add cylinder and 1 blocking ring to inside. Add 1 blocking ring to outside. 38-091 L9070R to L9071R L9076R to L9077R (1) 30-008 Cylinder (2) 36-082-050 Blocking Ring 38-092 L9070BD to L9071BD L9076BD to L9077BD (1) 80-108 Cylinder (2) 36-082-050 Blocking Ring Add cylinder and 1 blocking ring to inside. Use 1 blocking ring to replace existing outside blocking ring. L9070P to L9071P L9076P to L9077P (1) 30-001-118 Cylinder (includes Compression Spring and Ring) (1) 36-082-012 Blocking Ring (1) 09-635 Escutcheon Replace existing inside escutcheon. Add cylinder and compression spring only to inside. Add compression ring only to outside.* L9070R to L9071R L9076R to L9077R (1) 30-008 Cylinder (1) 36-082-012 Blocking Ring (1) 09-635 Escutcheon Replace existing inside escutcheon. Add cylinder and blocking ring to inside. L9070BD to L9071BD L9076BD to L9077BD (1) 80-108 Cylinder (1) 09-635 Escutcheon Replace existing inside escutcheon. Add cylinder to inside. $128.00 M ORTISE 38-090 206.00 124.00 L Escutcheon Trim 38-093 38-094 38-095 $287.00 287.00 205.00 * Also add blocking ring to outside of 1 5/8" doors. Use compression spring only on outside of 1 7/8" doors. L-45 Notes 1) Specify finish and keying. 2) Subject to same discount as L-Series Locks. 3) Use of these kits requires drilling hole in door for inside cylinder. LM9300 Three-Point Lock Parts Part Number Description 24358830 LM9300 rodset 6' 8" - 8' 0" doors, 39" centerline $2,421.00 24457715 LM9300 rodset 4' 0" - 5' 11" doors, 26" centerline 2,421.00 24457723 LM9300 rodset 3' 1" - 3' 11" doors, 15" centerline 2,421.00 24353625 List LM9300 strike package (top and bottom strikes, floor, anchors, screws) Note 116.00 LM9300 rodsets require specially prepped door from Steelcraft Price Book 8 Effective April 4, 2020 • Rev. 04/20 209 L • Parts Screw Packs & Special Parts Screw Packs 605 606 609 612 Available Finishes MORTISE Part Number • • • • 613 619 • • Description 622 625 626 629 630 643e • • • • • • Price Each Standard Screw Packs Lock Case Screws: contains (2) C603-256, #12-24 WMS PFH. C203-736 Specify 455 Finish. $6.80 C203-736 Strike Screws: Contains: (2) C603-256, #12-24 WMS PFH. K110-020 Armor Front Screws: Contains (2) K510-210, #8-32 x 1/4" MS PFH 0.92 K110-947 Rose Trim Thumbturn screws: Contains: (2) K510-445, #4 x 1/2" POH AB 8.40 Trim Mount Screws & Posts, 1 3/4" door: Contains: (2) L583-066, #8-32 x 1/2" PFH (2) L583-212, 1 3/4" posts. Finish not required. L escutcheon thru-bolts, 1 3/4" doors L283-101 Contains: (2) L583-120 Part pack for L mortise. Specify finish (xx) L283-154 xx Contains: (2) spindles, (2) spindle spring, (2) ferrules, (2) ferrule screws, (2) mounting screws, (2) armor screws, (2) strike screws L-46 L283-100 29.70 11.80 46.40 L583-585 Set screw, SK1 knob / SL1 lever 4.70 L283-615 Contains (3) L583-902 set screws and allen key 8.40 MS = Metal Screw WMS = Wood/Metal Screw PFH = Phillips Flat Head POH = Phillips Oval Head Torx® Screw Packs* Rose trim w/o thumbturn. Contains: (2) armor screws, #8-32 x 1/4" (T-15) (2) strike screws, #12-24 x 1/2" (T-20) Rose trim w/ thumbturn. Contains: (2) armor screws, #8-32 x 1/4" (T-15) L283-122 (2) strike screws, #12-24 x 1/2" (T-20) (2) thumbturn screws, #4 x 1/2" (T-8) L Escutcheon for 1 3/4" doors. Contains: (2) armor screws, #8-32 x 1/4" (T-15) L283-123 (2) esc. screws, 1/4-28 x 2 1/8" (T-30) (2) strike screws, #12-24 x 1/2" (T-20) N Escutcheon for 1 3/4" doors. Contains: (2) armor screws, #8-32 x 1/4" (T-15) XL11-8486 (2) strike screws, #12-24 x 1/2" (T-20) (2) esc. screws, #8-32 x 1 1/2" (T-20) * Torx screw packs furnished with appropriate T-xx installation tool. 6 Extended lead time Ordering instructions: Specify part number and finish. Ex: L283-123 626. L283-121 $22.80 Special Parts 605 606 609 612 Available Finishes Part Number XL11-422 XB11-720 XK10-992 XL11-515 XL11-634 XL11-636 XL11-743 10-144 10-145 • • Description Solid latchbolt (nylon insert) for use with electric strikes. Finish not required. Price listed is adder to lock Mortise cylinder turn unit with ADA compliant style thumbturn. Price listed is adder to 09-900, 09-904, 09-905 or 09-907 10-072 strike with >2" thru 6" lip. Specify lip length on order 1/8" thick lead plate. Specify lock function and door hand on order Blank inside L escutcheon Blank outside L or N escutcheon. Specify L or N on order. Armor front with cutout to receive deadbolt only, for use with L9110, L9175 and L9176 dummy functions One hole strike for latching functions LH/RHR for SK1, SL1 and HSLR trim One hole strike for latching functions RH/LHR for SK1, SL1 and HSLR trim Price Book 8 210 • Effective April 4, 2020 • Rev. 04/20 • 613 619 • • 622 625 626 629 630 643e • Price Each $110.00 125.00 209.00 522.00 325.00 447.00 136.00 44.00 • • • • • Parts • L Mortise Cylinders Mortise Cylinders 605 606 609 612 Available Finishes • • • • 613 619 • • 622 625 626 629 630 643e • • • • • • Price Each Description L583-474 For cyl. length 1 1/8", L583-274 For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" 1 3/8", 1 5/8" Cylinder Only: L & N Escutcheons X X Y Y Dim. X = .261 Y = .644 274 ousing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" X Dim. X = .261 Y = .644 Dim. X = .261 Y = .644 L583-475 For L583-275 cyl. length 1 1/4", For housing1sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" 1 1/2", 3/4" Cylinder With Compression Ring & Spring: Rose Trim X Y Dim. X = .261 Y = .644 Complete Cylinder Open Restricted $75.00 $93.00 30-021 Primus Controlled Access 20-793 Primus XP Controlled Access 20-793-XP Primus UL437 20-593 Primus XP UL437 20-593-XP Hotel Function (Standard) 30-022I 122.00 140.00 86.00 104.00 159.00 93.00 Standard 30-001 Everest 29 SL (R/B Keyways only) 91-062 Primus Controlled Access 20-787 Primus XP Controlled Access 20-787-XP Everest 29 SL Primus XP (R/B Keyways only) 91-757-XP Primus UL437 20-587 Primus XP UL437 20-587-XP Everest SL UL437-XP 91-557-XP Primus Lockout 20-717 Primus XP Lockout 20-717-XP Primus UL437 Lockout 20-517 Primus XP UL437 Lockout 20-517-XP Hotel Function (Standard) 30-002I 125.00 Standard 26-021 $75.00 Everest 29 SL (R/B Keyways only) 91-059 Primus Controlled Access 20-701 Primus XP Controlled Access 20-701-XP Primus XP Everest 29 SL (R/B Keyways only) 91-759-XP Primus UL437 20-501 Primus XP UL437 20-501-XP Everest SL UL437-XP 91-559-XP 104.00 169.00 169.00 L-47 Y L583-275 For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" Cylinder Mechanism Standard M ORTISE Cam 202.00 228.00 245.00 143.00 Schlage L9060 Outside and Other Straight Cam Applications L583-476 For cyl. length 1 1/8", 1 3/8",X1 5/8" Y DIM X = 0.35” DIM Y = 0.72” Cylinder Only: L & N Escutcheons L583-477 For cyl. length 1 1/4", 1 1/2",X1 3/4" Y DIM X = 0.35” DIM Y = 0.72” Cylinder With Compression Ring & Spring: Rose Trim Notes: Standard 20-001 Everest 29 SL (R/B Keyways only) 91-051 Primus Controlled Access 20-700 Primus XP Controlled Access 20-700-XP Primus XP Everest 29 SL (R/B Keyways only) 91-751-XP Primus UL437 20-500 Primus XP UL437 20-500-XP Everest SL UL437-XP 91-561-XP Primus Lockout 20-715 Primus XP Lockout 20-715-XP Primus UL437 Lockout 20-515 Primus XP UL437 Lockout 20-515-XP $93.00 159.00 193.00 193.00 86.00 104.00 104.00 103.00 164.00 202.00 228.00 245.00 Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $46.70. See Special Cylinders for 2" - 5" long cylinders. 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness. See page CYL-36 for required dimension. SL cylinders available in 1 1/8" and 1 1/4" lengths only Price Book 8 Effective April 4, 2020 • Rev. 04/20 211 L • Parts Allegion Connect Harnesses Allegion Connect Harnesses - Prices listed are net, discounting does not apply Part Number Description Price Each MORTISE Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors) CON-6 6" Wire Harness (internal p/n 106190-00) $10.80 CON-12 12" Wire Harness (internal p/n 106191-00) 14.40 CON-26 26" Wire Harness (internal p/n 106192-00) 16.30 CON-32 32" Wire Harness (internal p/n 106193-00) 17.40 CON-38 38" Wire Harness (internal p/n 106194-00) 19.10 CON-44 44" Wire Harness (internal p/n 106195-00) 18.50 CON-50 50" Wire Harness (internal p/n 106196-00) 19.10 CON-192 192" Wire Harness (internal p/n 106197-00) 45.50 L-48 Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors) CON-6P CON-12P CON-26P CON-32P CON-38P CON-44P CON-50P CON-192P $13.80 17.40 19.10 20.40 20.90 21.50 22.20 47.90 6" Wire Harness (internal p/n 106201-00) 12" Wire Harness (internal p/n 106202-00) 26" Wire Harness (internal p/n 106203-00) 32" Wire Harness (internal p/n 106204-00) 38" Wire Harness (internal p/n 106205-00) 44" Wire Harness (internal p/n 106206-00) 50" Wire Harness (internal p/n 106207-00) 192" Wire Harness (internal p/n 106208-00) Harness with Molex Connector on one end, stripped leads on other (for connection to power supply) CON-6W 6" extension to power supply (internal p/n 106210-00) $13.80 Connector Service Kit (internal p/n 050823-00-00) contains: -100 each male & female terminals -10 each 4-pin and 8-pin male connectors -10 each 4-pin and 8-pin female connectors - 1 extraction tool" $114.00 Service Kit CON-KIT Price Book 8 212 Effective April 4, 2020 • Rev. 04/20 LM9200 • Series Concealed two-point latching system for wood or hollow metal doors MULITIPOINT LM9200-1 For Wood Fire Door Applications For Two Point Latch Application NOTE: LM9200 series requires unique factory-prepped doors; please contact sales representative for list of compatible door manufacturers. Price Book 8 Effective April 4, 2020 • Rev. 04/20 213 LM9200 • Series Ordering Procedures MULITIPOINT To order Schlage products, descriptive data should be in the sequence as shown below. Line Item Qty 1 1 Outside Inside Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details LM9250P 06A 626 17B 643e RH LBL – 134 – 7'0" KA LM9200-2 Line Item: Line item number Qty: Quantity Product: Product function + cylinder code. No suffix is required for non-firerated wood or hollow metal doors; use ‘F’ suffix for firerated wood doors and ‘M’ suffix for firerated hollow metal doors. Outside Des: Outside lever design + rose/escutcheon code Outside Fin: Outside finish Inside Des: Inside lever design + rose/escutcheon code; specify only if different from outside Inside Fin: Inside finish; specify only if different from outside Hand: Hand of door (LH, LR, RH, RR) Latch: specify LBL (Less Bottom Latch) if top-latch only solution desired Strike: Not applicable; product ships with standard strikes only Dr Thk: Door Thickness; leave blank for standard thickness (1 3/4") or specify if non standard. Example: 200 = 2", 214 = 2 1/4" Ext: Extension, enter one of the following when door thckness 2" or greater are specified: EE = Extended Equally, EI = Extended Inside, EO = Extended Outside Dim: Height of door (6'8"-10'0" for non-fire rated openings, 6'8"-8'0" for fire rated openings) Additional Enter additional detail for keying information or special requirements Details: NOTE: For lock functions requiring a thumbturn, all orders will ship with the new ADA Thumbturn. If a different thumbturn is required, please specify on the order. Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 214 Effective April 4, 2020 • Rev. 04/20 LM9200 Introduction Product Identification LM92 50 F P M = UL listed for hollow metal doors Function Lock Series Prefix SFIC = Small Format (Best® Style) Interchangeable Core Finish Codes and Descriptions BAA/ARRA Contact your local RSO or Sales Rep. for ordering details Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US10) 613 (US10B) 619 (US 15) 622 (US19) 625 (US 26) 626 (US 26D) 626AM 629 (US 32) 630 (US 32D) 630AM 643e (US 11) Description Bright Brass Satin Brass Antique Brass Satin Bronze Oil Rubbed Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chromium Plated Antimicrobial Coating on Satin Chromium Bright Stainless Steel Satin Stainless Steel Antimicrobial Coating on Satin Stainless Steel Aged Bronze Standard Features Certifications Wood door applications: available UL listed for 60 minute fire door with two point latch or 20 minute fire door with top latch only. (Does not meet Canada UL 20-minute wood door requirement) Hollow metal door applications: available UL listed for 90 minute fire door with two point latch, one point latch, or double egress with astragal. Case Size Armor Front Backset Cylinder Door Range Keys 4 7/16" x 12 3/8" x 1" 1 1/4" x 15 7/8" 2 3/4" 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different 1 3/4" Two nickel silver cut keys per lock, 6 pin, S123 section NOTE: LM9200 only available in US and Canada Price Book 8 Effective April 4, 2020 • Rev. 04/20 215 LM9200-3 Cylinder Suffix P = Conventional, 6 Pin/Keyed 5 P6 = Conventional, 6 pin L = Conventional, 6 Pin W = Less Concealed Mortise Cylinder R = FSIC J = Less FSIC M = SL- FSIC F = FSIC without logo T = FSIC - Construction Core B = Less SFIC BDC = Disposable Construction SFIC G7 = SFIC (7 pin) H = Refundable Construction SFIC Z = SL Conventional Cylinder, 7 pin UL Listing Suffix F = UL Listed for wood doors MULITIPOINT Table of Contents Functions LM-4 Complete Locks LM-6 Standard Lever Collection A, B or C Rose Trim. . . . . . . . . . . . LM-6 Standard Lever Collection Escutcheon Trim. . . . . . . . . . . . . . LM-8 M Lever Collection A, B or C Rose Trim. . . . . . . . . . . . . . . . . . . . LM-10 M Lever Collection Escutcheon Trim. . . . . . . . . . . . . . . . . . . . . . LM-12 Options LM-14 Cylinder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-14 Locks Less Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-15 Non-Standard Door Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-15 Indicators (for Sectional (rose) or N Escutcheon Trim) . . . LM-16 Tactile Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-16 ADA Thumbturn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-16 Lever Trak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-16 Antimicrobial Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-16 Parts LM-17 Levers & Knobs, Roses, Escutcheons . . . . . . . . . . . . . . . . . . . . . LM-17 Outside Lever/Knob Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . LM-18 Armor Fronts & Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-18 Buttons, Thumbturns, Coin Turns, Cylinder Turns. . . . . . . . . LM-19 Occupancy Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-19 Thru-Bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-20 Mounting Posts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-20 Springs & Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-20 Lock Cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-21 Latch Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-21 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-21 Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-21 Fire Rated Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-21 Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-22 Mortise Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-23 Allegion Connect Harnesses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . LM-24 Complete Cylinders See Cylinders Section Forms & Examples How To Order LM9200 • Series Functions Mechanical Functions Passage Lock Latches retracted by lever from either side at all times. Inside lever always free for immediate egress. LM9270 Classroom Lock Latches retracted by lever from either side unless outside is made inoperative by key outside. Outside lever remains locked until unlocked by key. Inside lever always free for immediate egress. LM9225 Exit Lock Latches retracted by lever from inside at all times. No trim on outside. Not available escutcheon trim. LM9271 Classroom Security Lock Latches retracted by lever from either side unless outside is made inoperative by key from either side. Outside lever remains locked until unlocked by key either side. Inside lever always free for immediate egress. LM9250 Office/Entry Lock Latches retracted by lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. Outside lever remains locked until thumbturn is returned to vertical or unlocked by key. Inside lever always free for immediate egress. LM9280 Storeroom Lock Latches retracted by outside lever after key inserted and turned 280° or by inside lever. Inside lever always free for immediate egress. Specify handing on order. LM9256 Office/Entry with automatic unlocking Latches retracted by lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. Outside lever remains locked until thumbturn is returned to vertical, unlocked by key, or rotating inside lever. Inside lever always free for immediate egress. LM9200-4 MULITIPOINT LM9210 Price Book 8 216 Effective April 4, 2020 • Rev. 04/20 Series Functions • LM9200 Electrically locking/unlocking outside lever, no cylinder Outside lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. EL is fail safe (power failure allows outside lever to retract latchbolt); EU is fail secure (power failure locks outside lever). Inside lever always free for immediate egress. LM9293EL LM9293EU Electrically locking/unlocking both levers, Outside cylinder Inside and outside lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key outside. EL is fail safe (power failure allows either lever to retract latchbolt); EU is fail secure (power failure locks both levers). LM9291EL LM9291EU Electrically locking/unlocking both levers, no cylinder Inside and outside lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. EL is fail safe (power failure allows either lever to retract latchbolt); EU is fail secure (power failure locks both levers). LM9294EL LM9294EU Electrified outside levers lock two-point latch (inside and outside cylinder) Electrically locking/unlocking outside lever only. Latchbolt(s) retracted by outside key and lever, by electrically unlocking door, and by outside lever when electrically unlocking or anytime by inside lever. Inside lever is always free for immediate egress. Requires doors specifically designed for two-point latch system. LM9292EL LM9292EU Electrically locking/unlocking outside lever, Outside cylinder Outside lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key outside or lever inside. EL is fail safe (power failure allows outside lever to retract latchbolt); EU is fail secure (power failure locks outside lever). Inside lever always free for immediate egress. LM9295EL LM9295EU Electrically locking/unlocking both levers, Inside and outside cylinder Inside and outside lever continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key inside or outside. EL is fail safe (power failure allows either lever to retract latchbolt); EU is fail secure (power failure locks both levers). LM 9200-5 LM9290EL LM9290EU Price Book 8 Effective April 4, 2020 • Rev. 04/20 MULITIPOINT All electrified locks feature automatic detection and operation with 12 or 24V DC, and a case-mounted switch that allows customer selection of EL (fail safe) or EU (fail secure) operation. Please specify lock function as EL or EU for default switch position. Locks also come standard with Allegion Connect molex connector with 3" lead. Allegion Connect is a molex connector system that allows rapid installation of lock when used with Allegion connect harnesses (see last page of this section of pricebook) and Allegion connect Hinges (see Ives pricebook). For more information speak to your sales representative. The molex connector can also be cut off so that the lock can be installed with traditional splicing. Request to Exit (RX) is not an available option for the LM9200 series. 217 LM9200 • Complete Locks Standard Lever Collection* A, B or C Rose Trim Cast or Forged Lever Designs with Wrought Roses 01 02 MULITIPOINT 2¹⁄₁₆" 03 1¹³⁄₁₆" 3⁷⁄₈" 07 2³⁄₈" LM9200-6 2" 4⁵⁄₈" 4⁵⁄₈" LAT 2¹⁄₃₂" Accent (ACC) ³⁄₈" 3⁵⁄₁₆" 2" 4" 4" Ispecify hand 5¹⁄₁₆" Merano (MER) 2" 4¹⁄₈" 2³⁄₁₀" 2⁹⁄₁₆" Asti (AST) 2" OME 4⁷⁄₈" 2⁹⁄₁₆" 4³⁄₄" 3" ¹⁄₂" 4³⁄₄" 2¹¹⁄₁₆" ¹⁄₂" Ispecify hand LON 2" 4⁷⁄₈" 2¹⁵⁄₁₆" 3¹⁄₁₆" max. 2⁷⁄₈" 2¹⁄₂" 3¹⁄₈" 17 1³¹⁄₃₂" 18 2⁷⁄₈" 12 ¹⁄₂" 4⁵⁄₈" 3³⁄₄" 2¹³⁄₁₆" 2¹³⁄₁₆" 06 2⁹⁄₃₂" 4³⁄₄" 4³⁄₄" 2¹¹⁄₁₆" 2" 05 ¹⁄₂" Dia. ¹¹⁄₁₆" 2⁵⁄₈" Ispecify hand 3¹⁄₈" Ispecify hand Note: Above images shown with A Rose. Wrought Rose Designs A B C (not available 612 or 613 finish) 2 1/8" (54 mm) diameter 2 9/16" (65mm) diameter 2 5/8" (66mm) diameter Price Book 8 218 AVA (ACC lever only) Effective April 4, 2020 • Rev. 04/20 2 5/8" (66mm) diameter MER (MER lever only) 2 5/8" (66mm) diameter Complete Locks • LM9200 A, B or C Rose Trim LM9200 (A, B or C Rose Trim) - Standard Collection levers Lever Designs 03 03 06 07 12I 17 OME 6: 01, 02, 05, 18, LAT*, LON * ACCI†, ASTI†, MERI† * Not available 612, 613 † Not available 629, 630 Finishes 626 Function 626 Description FOR UL FIRERATED WOOD DOORS (6'8" - 8'0" door range, specify height on order) Keyless Functions LM9210F Passage LM9225F Exit LM9290FEL or EU Electrified lock, no cylinders, outside lever locks LM9291FEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250FP Office/Entry LM9256FP Office/Entry w/Automatic Unlocking LM9270FP Classroom LM9280FP Storeroom (specify handing on order) LM9292FELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293FELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271FP Classroom Security LM9295FEPL or EUP Electrified lock, inside and outside cylinders, both levers lock $3,185 $3,203 3,573 3,591 $3,362 3,433 $3,380 3,451 3,362 3,380 3,861 3,879 $3,440 3,733 $3,458 3,751 Adjustment for Less Bottom Latch (LBL option code) -123 $3,213 $3,323 $3,335 $3,353 3,601 3,711 3,723 3,741 $3,390 3,461 $3,500 3,571 $3,512 3,583 $3,530 3,601 3,390 3,500 3,512 3,530 3,889 3,999 4,011 4,029 $3,468 3,761 $3,578 3,871 $3,590 3,883 $3,608 3,901 $3,173 $3,185 $3,203 3,561 3,573 3,591 $3,350 3,421 $3,362 3,433 $3,380 3,451 3,240 3,350 3,362 3,380 3,739 3,849 3,861 3,879 $3,318 $3,428 $3,440 $3,458 3,611 3,721 3,733 3,751 --123 -123 -123 FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order) Keyless Functions LM9210M Passage $3,063 LM9225M Exit LM9290MEL or EU Electrified lock, no cylinders, outside lever locks 3,451 LM9291MEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions $3,240 LM9250MP Office/Entry 3,311 LM9256MP Office/Entry w/Automatic Unlocking LM9270MP Classroom LM9280MP Storeroom (specify handing on order) LM9292MELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293MELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271MP Classroom Security LM9294MELP or EUP Electrified lock, inside and outside cylinders, outside lever locks LM9295MELP or EUP Electrified lock, inside and outside cylinders, both levers lock 613 629 630 LM9200-7 FOR NON FIRERATED WOOD AND HOLLOW METAL DOORS (6'8" - 10'0 door range, specify height on order) Keyless Functions LM9210 Passage $3,063 $3,173 LM9225 Exit LM9290EL or EU Electrified lock, no cylinders, outside lever locks 3,451 3,561 LM9291EL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250P Office/Entry $3,240 $3,350 LM9256P Office/Entry w/Automatic Unlocking 3,311 3,421 LM9270P Classroom 3,240 3,350 LM9280P Storeroom (specify handing on order) LM9292ELP or EUP Electrified lock, outside cylinder, outside lever locks 3,739 3,849 LM9293EPL or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271 Classroom Security $3,318 $3,428 LM9293ELP or EUP Electrified lock, inside and outside cylinders, both levers lock 3,611 3,721 605 606 609 612 619 622 625 643e -123 -123 -123 -123 -123 Price Book 8 Effective April 4, 2020 • Rev. 04/20 MULITIPOINT 06 07 12I 17 OME 219 LM9200 • Complete Locks Standard Lever Collection* Escutcheon Trim Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons 01 02 MULITIPOINT 2¹⁄₁₆" 03 05 ¹⁄₂" Dia. ¹¹⁄₁₆" 1¹³⁄₁₆" 3⁷⁄₈" 4³⁄₄" 4³⁄₄" 2¹⁄₁₆" 06 07 ¹⁄₂" 2" 2¹³⁄₁₆" 2¹³⁄₁₆" 3⁷⁄₈" 12 2¹¹⁄₁₆" LM9200-8 2" 1³¹⁄₃₂" 4⁵⁄₈" 2³⁄₈" LAT 2¹⁄₂" 2¹⁄₃₂" 2" Accent (ACC) Ispecify 4⁵⁄₈" hand 4¹⁄₈" 5¹⁄₁₆" 3⁵⁄₁₆" 2⁹⁄₁₆" Ispecify hand 3¹⁄₈" Ispecify hand 4" 2" 4" Note: Above images shown with L Escutcheon. 2⁵⁄₈" 3¹⁄₈" 3¹⁄₈" Cast/Forged (L) or Wrought (N) L N Dimensions: 7 15/16" x 1 3/4" x 7/16" (202mm x 44mm x 11mm) Dimensions: 7 7/8" x 2 1/2" x 7/16" (200mm x 64mm x 11mm) Price Book 8 220 2 ³⁄₁₀" 3⁵⁄₁ 4" 2" ³⁄₈" 4⁷⁄₈" 2" 2⁵⁄₈" Ispecify hand 3" 2³⁄₁₀" Merano (MER) 4" 2" 4 ³⁄₈" 2⁹⁄₁₆" 2" ¹⁄₂" 3¹⁄₁₆" max. 4³⁄₄" Asti (AST) 2¹⁵⁄₁₆" OME 2⁹⁄₁₆" 2¹¹⁄₁₆" 4³⁄₄" 4⁵⁄₈" 4⁷⁄₈" 2⁹⁄₁₆" 4¹⁄₈" 3³⁄₄" 3" 2" ¹⁄₂" 4⁷⁄₈" 2" 2⁹⁄₃₂" 2⁷⁄₈" ¹⁄₂" 2" ¹⁄₂" 2¹⁄₃₂" 3¹⁄₈" 3¹⁄₁₆" max. 4³⁄₄" 2¹⁄₃₂" 2¹⁵⁄₁₆" LON 2⁷⁄₈" 4⁷⁄₈" 2⁹⁄₃₂" 4³⁄₄" 172¹³⁄₁₆" 4⁵⁄₈" 2⁷⁄₈" 2¹⁄₂" 2⁷⁄₈" 2" 2¹³⁄₁₆" 4⁵⁄₈" ¹⁄₂" 2¹¹⁄₁₆" 4³⁄₄" 2" 2³⁄₈" 18 ¹⁄₂" Dia. ¹¹⁄₁₆" 1¹³⁄₁₆" 1³¹⁄₃₂" 4⁵⁄₈" 3³⁄₄" 1¹³⁄₁₆" 2¹⁄₁₆" 2¹¹⁄₁₆" 2⁹⁄₃₂" Effective April 4, 2020 • Rev. 04/20 Complete Locks • LM9200 LM9200 (L or N Escutcheon) - Standard Collection levers Lever Designs 03 06 07 12I 17 OME MULITIPOINT 03 06 07 12I 17 OME 6: 01, 02, 05, 18, LAT*, LON * ACCI†, ASTI†, MERI† * Not Available 612, 613 † Not available 629, 630 Finishes 626 Function 613 629 630 $3,120 $3,138 3,496 3,514 $3,291 3,360 $3,309 3,378 3,291 3,309 3,776 3,794 $3,367 3,652 $3,385 3,670 $3,258 $3,270 $3,288 3,634 3,646 3,664 $3,429 3,498 $3,441 3,510 $3,459 3,528 3,429 3,441 3,459 3,914 3,926 3,944 $3,505 3,790 $3,517 3,802 $3,535 3,820 $3,108 $3,120 $3,138 3,484 3,496 3,514 $3,279 3,348 $3,291 3,360 $3,309 3,378 3,279 3,291 3,309 3,764 3,776 3,794 $3,355 $3,367 $3,385 3,640 3,652 3,670 Description FOR NON FIRERATED WOOD AND HOLLOW METAL DOORS (6'8" to 10'0" door range; specify height on order) Keyless Functions LM9210 Passage $3,108 LM9290EL or EU Electrified lock, no cylinders, outside lever locks 3,484 LM9291EL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250P Office/Entry $3,279 LM9256P Office/Entry w/Automatic Unlocking 3,348 LM9270P Classroom 3,279 LM9280P Storeroom LM9292ELP or EUP Electrified lock, outside cylinder, outside lever locks 3,764 LM9293ELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271P Classroom Security $3,355 LM9295ELP or EUP Electrified lock, inside and outside cylinders, both levers lock 3,640 FOR UL FIRERATED WOOD DOORS (6'8" - 8'0" door range; specify height on order) Keyless Functions LM9210F Passage LM9290FEL or EU Electrified lock, no cylinders, outside lever locks LM9291FEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250FP Office/Entry LM9256FP Office/Entry w/Automatic Unlocking LM9270FP Classroom LM9280FP Storeroom LM9292FELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293FELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271FP Classroom Security LM9295FELP or EUP Electrified lock, inside and outside cylinders, both levers lock FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order) Keyless Functions LM9210M Passage LM9290MEL or EU Electrified lock, no cylinders, outside lever locks LM9291MEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250MP Office/Entry LM9256MP Office/Entry w/Automatic Unlocking LM9270MP Classroom LM9280MP Storeroom LM9292MELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293MELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271MP Classroom Security LM9294MELP or EUP Electrified lock, inside and outside cylinders, outside lever locks LM9295MELP or EUP Electrified lock, inside and outside cylinders, both levers lock Adjustment for Less Bottom Latch (LBL option code) -123 LM9200-9 605 606 609 612 619 622 625 643e -123 -123 -123 -123 -123 -123 -123 -123 Price Book 8 Effective April 4, 2020 • Rev. 04/20 221 LM9200 • Complete Locks M Lever Collection* A, B or C Rose Trim Cast or Forged Lever Designs with Wrought Roses M51 M52 2.4" MULITIPOINT M53 2.2" 2.6” 4.5" 4.5" 3" 3.2" 3.2” 2.2" 2.4" M54 4.35” 4.5" M55 M56 4.5" 2.14” 2.14” 3.2" 2.3” 2.6” 4.35” 2.1” 3" 3.2” 4.3” 4.35” 3” 2.75” 4.6” 2.4” 3” 2.14” 2.14” LM9200-10 M57 2.1” 4.3” M61 2.3” M62 4.35” 2.15” 1.9” 3” 4.5” 2.75” 3.2” 2.9” Ispecify hand 2.15” 2.1” 2.7” 1.9” Ispecify hand 4.5” M81 4.5” M82 4.5” 0.4” 0.4” 2.1” 3.2” 2.7” 2.9” 2.1” 4.5” 3” 4.5” 4.5” M63 4.6” 2.4” 2.1” 4.8” 2.2” 4.8” 2.1” 2.9” Ispecify hand 3.2” 0.4” 4.5” M83 M84 3.2” 0.4” 0.4” 2.9” 2.1” 4.8” 0.4” 4.8” 2.2” M85 0.3” 2.9” 4.6” 2.9” 5.1” 0.4” 2.9” 4.6” ME2 0.4” 3.3” 3” 5.5” 5.1” 2.125” 2.125” 0.4” 2.8” 3.2” 0.4” 5.5” Wrought Rose Designs 2.125” B 5.1” 2.125” 2.125” 3.0” 0.4” 5.2” C (not available 612 or 613 finish) 2.8” Price Book 8 222 4.9” 5.1” 5.2” 2.125” Ispecify hand 0.4” 2.9” A 3.3” ME3 0.4” 3.0” 0.3” 0.4” 3” ME1 4.9” Effective April 4, 2020 • Rev. 04/20 3.2” Note: Above images shown with A Rose. Complete Locks • LM9200 LM9200 (A, B or C Rose Trim) - M Collection levers Lever Designs Standard Lead-time: M51, M52, M81 Finishes Function 605 606 609 619 622 625 626 629 630 643e Description FOR UL FIRERATED WOOD DOORS (6'8" to 8'0" door range; specify height on order) Keyless Functions LM9210F Passage LM9225F Exit LM9290FEL or EU Electrified lock, no cylinders, outside lever locks LM9291FEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250FP Office/Entry LM9256FP Office/Entry w/Automatic Unlocking LM9270FP Classroom LM9280FP Storeroom LM9292FELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293FELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271FP Classroom Security LM9295FELP or EUP Electrified lock, inside and outside cylinders, both levers lock FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order) Keyless Functions LM9210M Passage LM9225M Exit LM9290MEL or EU Electrified lock, no cylinders, outside lever locks LM9291MEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250MP Office/Entry LM9256MP Office/Entry w/Automatic Unlocking LM9270MP Classroom LM9280MP Storeroom LM9292MELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293MELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271MP Classroom Security LM9294MELP or EUP Electrified lock, inside and outside cylinders, outside lever locks LM9295MELP or EUP Electrified lock, inside and outside cylinders, both levers lock $3,203 -123 3,591 $3,380 3,451 3,380 LM9200-11 FOR NON FIRERATED WOOD AND HOLLOW METAL DOORS (6'8" to 10'0" door range; specify height on order) Keyless Functions LM9210 Passage LM9225 Exit LM9290EL or EU Electrified lock, no cylinders, outside lever locks LM9291EL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250P Office/Entry LM9256P Office/Entry w/Automatic Unlocking LM9270P Classroom LM9280P Storeroom LM9292ELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293ELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271P Classroom Security LM9295ELP or EUP Electrified lock, inside and outside cylinders, both levers lock Adjustment for Less Bottom Latch (LBL option code) -123 3,879 $3,458 3,751 -123 $3,353 -123 3,741 $3,530 3,601 3,530 -123 4,029 $3,608 3,901 -123 $3,203 -123 3,591 $3,380 3,451 3,380 -123 3,879 $3,458 3,751 -123 Price Book 8 Effective April 4, 2020 • Rev. 04/20 MULITIPOINT 6: M53, M54, M55, M56, M57†, M61I, M62I†, M63I, M82, M83, M84, M85, ME1I, ME2I, ME3 † Available 629 and 630 only 223 LM9200 • Complete Locks M Lever Collection Escutcheon Trim Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons M51 M52 2.2" 2.4" MULITIPOINT M53 2.6” 4.5" 4.5" 4.35” 3" 3.2" 3.2” 2.2” 2.4” M54 2.55” M55 4.5” 2.14” 4.35” 2.1” 2.14” 3.2” M56 4.5” 3” 3.2” 2.3” 4.3” 4.35” 3” 3” 2.75” 4.6” 2.4” 2.1” 2.125” 2” M57 M61 LM9200-12 2.3” M62 4.3” 4.35” 4.5” 2.4” 2.1” 2.15” 1.9” 3” 4.5” 2.75” 3.2” 2.9” 2.7” Ispecify hand 2.1” M63 1.9” M82 4.5” 0.4” 0.4” 2.6” 3.2” 2.1” 4.5” Ispecify hand 4.5” 4.5” 2.9” 3.2” Ispecify hand 2” M81 2.1” 4.8” 2.2” 4.8” 2.9” 2” 3” 4.5” 4.5” 2.9” 0.4” 0.4” 4.5” M83 M84 0.4” M85 2.1” 0.3” 0.4” 3.15” 4.8” 2.2” 4.8” 2.85” 2.9” 4.6” 4.9” 5.1” 0.4” 2.9” 3.3” 3” 0.4” ME1 ME2 ME3 4.6” 0.4” Ispecify hand 0.3” 5” 5” 0.4” 0.5” 2.125” 3” 5.4” 3.3” 2.85” 5.0” 5.2” 0.4” 0.4” 0.5” 3.2” 2.9” 3.0” Note: Above images shown with L escutcheon. Cast/Forged (L) or Wrought (N) 2.9” 3.0” L 3.2” N Dimensions: 7 15/16" x 1 3/4" x 7/16" (202mm x 44mm x 11mm) Dimensions: 7 7/8" x 2 1/2" x 7/16" (200mm x 64mm x 11mm) Price Book 8 224 5.0” 5.2” 5.4” Effective April 4, 2020 • Rev. 04/20 Complete Locks • LM9200 LM9200 (L or N Escutcheon) - M Collection levers Lever Designs Standard Lead-time: M51, M52, M81 Finishes Function 605 606 609 619 622 625 626 629 630 643e Description FOR UL FIRERATED WOOD DOORS (6'8" to 8'0" door range; specify height on order) Keyless Functions LM9210F Passage LM9290FEL or EU Electrified lock, no cylinders, outside lever locks LM9291FEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250FP Office/Entry LM9256FP Office/Entry w/Automatic Unlocking LM9270FP Classroom LM9280FP Storeroom LM9292FELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293FELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271FP Classroom Security LM9295FELP or EUP Electrified lock, inside and outside cylinders, both levers lock FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order) Keyless Functions LM9210M Passage LM9290MEL or EU Electrified lock, no cylinders, outside lever locks LM9291MEL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250MP Office/Entry LM9256MP Office/Entry w/Automatic Unlocking LM9270MP Classroom LM9280MP Storeroom LM9292MELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293MELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271MP Classroom Security LM9294MELP or EUP Electrified lock, inside and outside cylinders, outside lever locks LM9295MELP or EUP Electrified lock, inside and outside cylinders, both levers lock $3,138 3,514 -123 $3,309 3,378 3,309 LM9200-13 FOR NON FIRERATED WOOD AND HOLLOW METAL DOORS (6'8" to 10'0" door range; specify height on order) Keyless Functions LM9210 Passage LM9290EL or EU Electrified lock, no cylinders, outside lever locks LM9291EL or EU Electrified lock, no cylinders, both levers locks Keyed Single Cylinder Functions LM9250P Office/Entry LM9256P Office/Entry w/Automatic Unlocking LM9270P Classroom LM9280P Storeroom LM9292ELP or EUP Electrified lock, outside cylinder, outside lever locks LM9293ELP or EUP Electrified lock, outside cylinder, both levers lock Keyed Double Cylinder Functions LM9271P Classroom Security LM9295ELP or EUP Electrified lock, inside and outside cylinders, both levers lock Adjustment for Less Bottom Latch (LBL option code) -123 3,794 $3,385 3,670 -123 $3,288 3,664 -123 $3,459 3,528 3,459 -123 3,944 $3,535 3,820 -123 $3,138 3,514 -123 $3,309 3,378 3,309 -123 3,794 $3,385 3,670 -123 Price Book 8 Effective April 4, 2020 • Rev. 04/20 MULITIPOINT 6: M53, M54, M55, M56, M57†, M61I, M62I†, M63I, M82, M83, M84, M85, ME1I, ME2I, ME3 † Available 629 and 630 only 225 LM9200 • Options Cylinder Options Cylinder Adjustments MULITIPOINT Specify Description Lock Price Adjustment (per cylinder) Concealed Cylinder (L Escutcheon only) C Suffix $27.00 Concealed cylinder for L escutcheon Full Size Interchangeable Core (FSIC) R Suffix Full size core (furnished 1-bitted w/ two 6-pin keys unless otherwise specified) J Suffix Less full size core $75.00 N/C Full Size Construction Core T Suffix Full size construction core (assessed handing charge 50-231 per core) $75.00 Small Format Interchangeable Core (SFIC) (Not available with Hotel Functions L9485 or L9486) GD Suffix Everest patented core (specify key symbol; see Terms & Conditions for more details) BD Suffix Less small format core $87.00 N/C LM9200-14 Small Format Construction Core & Disposable Core HD Suffix Small format construction core (assessed handing charge 50-231 per core) BDC Suffix Small format disposable core $45.00 N/C Construction Core Handling Charge 50-231 Handing charge for construction core (assessed per core, non-refundable) Notes $10.70 Control keys are not furnished with locks and must be purchased separately. See Keys & Keying. Interchangeable cores are not available with concealed cylinders. Ordering instructions: Add suffix to lock function. Ex: LM9250J (LM9250 function less full size core) Primus / Primus XP - available through specific channels based on security levels. See Terms & Conditions for details. Specify Description Lock Price Adjustment Full-Face Primus Cylinders -$88 per cylinder L Suffix Order lock less cylinder; order Primus cylinder 20-787 or 20-793 separately 20-787 Full-face Primus cylinder w/ compression ring & spring (for use with rose trim) 169.00 20-793 Full-face Primus cylinder only (for use with escutcheon trim) 159.00 Concealed Primus Cylinders W Suffix Order lock less concealed cylinder; order Primus cylinder 20-589 separately $28.00 20-589 Concealed Primus cylinder (for use with L escutcheon w/ concealed cylinder only) 225.00 Full-Size Interchangeable Primus Core J Suffix Order lock less full size core; order full-size Primus core 20-740 separately 20-740 Full-size interchangable Primus core Notes $157.00 Primus not available for Faculty Restroom function (L9485, L9486) Ordering instructions: Add suffix to lock function, order Primus cylinder separately. Ex: LM9250W (LM9250 function less concealed cylinder) order 20-589 on separate line. Price Book 8 226 N/C for J Suffix Effective April 4, 2020 • Rev. 04/20 Options • LM9200 Locks Less Components Locks Less Components Specify Lock Price Adjustment Less each knob or lever LLL for knob/lever design Example: LM9250P LLL/03A x 03A -$28.30 Less each rose or escutcheon LLL for rose/escutcheon design Example: LM9250P 03A x 03A/LLL -28.30 Less complete trim one side* LLL for complete trim outside Example: LM9250P LLL x 03A -56.60 Less full face cylinder (rose trim) L suffix Example: LM9250L 03A -86.00 per cylinder Less full face cylinder L suffix Example: LM9250L 03L -75.00 per cylinder Less concealed cylinder (L escutcheon only) W suffix Example: LM9250W 03L -75.00 per cylinder MULITIPOINT Description Non Standard Door Thickness Description Lock Price Adjustment LM9200-15 Specify Keyless Functions thickness & how applied (xx) For > 1 3/4" - 2 1/2" thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) For > 2 1/2" - 4" thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) N/C $105.00 Single Cylinder Functions thickness & how applied (xx) For > 1 3/4" - 2 1/2" thick doors For > 2 1/2" - 4" thick doors - specify (xx) Extended Inside (EI) For > 2 1/2" - 4" thick doors - specify (xx) Extended Outside (EO), Equally (EE), or Differently (ED) N/C $105.00 516.00 Double Cylinder Functions thickness & how applied (xx) For > 1 3/4" - 2 1/2" thick doors N/C For > 2 1/2" - 4" thick doors - specify (xx) Extended Inside (EI) or Extended Outside (EO) $516.00 For > 2 1/2" - 4" thick doors - specify (xx) Extended Equally (EE) or Extended Differently (ED) 922.00 Notes Price keyed locks less cylinders (L or W suffix) same as keyless locks Locks furnished Extended Equally unless otherwise specified Locks w/ N Esctucheon only available for 1 3/4" - 2 3/8" thick doors Locks with small format interchangable cores (BD, BDC, GD, HD suffix) only available for 1 3/4" - 2 1/4" thick doors The following functions are only available Extended Equally (EE): LM9291, LM9293, LM9295 and LM9295M. Ordering instructions: Include thickness and how extended in order. EX - LM9250P 03A 626 2" EE (LM9250P function, 03A trim, 626, for 2" door extended equally). For lock functions requiring a thumbturn, customers ordering Sectional Trim with a door thickness greater than 3 3/4" (EE) or 2 1/2" (EI) will will receive the larger ADA thumbturn (09-509 x L583-363). Customers ordering Escutcheon Trim with a door thickness greater than 3 1/4" (EE) or 2" (EI) will will receive the larger ADA thumbturn (09-509 x L583-363). Any thumbturns ordered in 612 or 613 finish will also receive the larger ADA thumbturn as standard. Price Book 8 Effective April 4, 2020 • Rev. 04/20 227 Indicators (for Sectional (rose) or Tactile Warning, ADA Thumbturn, Lever Trak LM9200 • Options LM9200-16 MULITIPOINT N Escutcheon Indicator Available Messages LOCKED/OCCUPIED/DO NOT DISTURB/ lock symbol is white text on red background UNLOCKED/VACANT/unlocked symbol is black text on white background LOCKED OCCUPIED UNLOCKED VACANT DO NOT DISTURB Indicators - N Escutcheon Trim Only Specify Description inside indicators available for: LM9250, LM9256, LM9271 L283-711 LOCKED/UNLOCKED indicator for inside of door L283-712 VACANT/OCCUPIED indicator for inside of door L283-713 DO NOT DISTURB indicator for inside of door L283-714 symbols only indicator for inside of door outside indicators available for: LM9250, LM9256, LM9270, LM9271 L283-721 LOCKED/UNLOCKED indicator for outside of door L283-722 VACANT/OCCUPIED indicator for outside of door L283-723 DO NOT DISTURB indicator for outside of door L283-724 symbols only indicator for outside of door Notes: 1) Indicators available in all finishes except 612 and 613 2) Indicator option available either inside or outside of door only. 3) Cylinder and sectional indicators require additional door preparation. Lock Price Adjustment $111.00 111.00 111.00 111.00 111.00 111.00 111.00 111.00 Ordering instructions: add part number under “Additional Details” section of order. EX: LM9250P 06N 626 L283-711 adds indicator to the inside (thumbturn side) of lock For Inside Indicators and lock functions requiring a thumbturn, customers ordering. Customers ordering Escutcheon Trim with a door thickness greater than 3 1/4" (EE) or 2" (EI) will will receive the larger ADA thumbturn (09-509 x L583-363). Any thumbturns ordered in 612 or 613 finish will also receive the larger ADA thumbturn as standard. Tactile Warning Specify '8' lever prefix Description Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17, 18, M51, M52, M81 and ME lever designs Ordering instructions: Preface lever design code with 8. EX - 803 for 03, 806 for 06, 851 for M51, etc. Lock Price Adjustment $49.20 Optional Thumbturns Specify Description L583-363 Large ADA thumbturn option L583-231 Basic thumbturn option Ordering instructions: include in order under “Additional Details”. Lock Price Adjustment N/C Folger Adam Co® Lever Trak™ Specify 503 Lever Design Description Modified inside and outside 03 lever for Folger Adam Co. ® Lever Trak™. Available rose trim only, not available 629 or 630 finish. Ordering instructions: Specify lever design as 503. Lock Price Adjustment $108.00 Antimicrobial Coating Specify 626AM or 630AM Description Rose Trim: Adds silver-ion based antimicrobial coating to inside lever, bushing, rose & thumbturn and outside lever, bushing, rose, cylinder ring, and cylinder faceplate 626AM or 630AM Escutcheon Trim: Adds silver-ion based antimicrobial coating to inside lever, bushing, escutcheon & thumbturn and outside lever, bushing, escutcheon, and cylinder face plate Ordering instructions: Specify finish as either 626AM or 630AM. Price Book 8 228 Effective April 4, 2020 • Rev. 04/20 Lock Price Adjustment $52.40 Parts • LM9200 Levers & Roses, Escutcheons Levers 605 606 609 612 Style Lever Design Standard 016, 026, 03*, 056, 06, 07, 12I, 17, 18, OME6 ACCI, ASTI, MERI, STAI Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, M856I, ME16I, ME26I, ME36 • • • • • • • • • 613 619 622 625 626 629 630 643e • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • M576I, M626I MULITIPOINT LAT6, LON6 • • • 6Extended Factory Lead Time Ispecify handing Part Number Description 09-401 Outside lever, retaining clip, insertion tool 09-402 Inside lever+bushing, mounting plate, screw pack, spanner wrench * Standard Levers Decorative Levers $186 $201 Available modified for Folger Adam Co.® Lever Track™. Specify 503 design and add $54.00. Not available in 629 or 630 finish. Ordering instructions: Specify part number, lever style + rose, finish. Ex: 09-401 03A 626. Style 605 606 609 612 Rose Design • • Standard A, B, C Decorative MER, AVA Part Number Description 09-403 Inside Rose (includes mounting plate and screws) 09-404 Outside Rose+Bushing 09-508 Blank Outside Rose (not available MER or AVA) • • • • • 613 619 622 625 626 629 630 643e • • • • • • • • • • • • • Standard and Decorative $105.00 Ordering instructions: Specify part number, lever design + rose, finish. Ex: 09-404 03A 626. Lever design must be specified for proper bushing. Escutcheons 605 606 609 612 Available finishes • • • • 613 619 622 625 626 629 630 643e • • • • • • • • Part L Escutcheon N Escutcheon Number Description Outside Escutcheon & Bushing 09-636 Blank x lever 09-637 Emergency turn x lever $186 $186 09-638 Concealed cylinder x lever 09-639 Full face cylinder x lever Inside Escutcheon 09-632 Blank x lever 186 09-633** Thumbturn x lever 186 09-634** Thumbturn x blank 09-635 Full face cylinder x lever 186 186 09-642** Thumbturn x lever or knob1 09-548** Thumbturn x blank1 186 09-549 ADA thumbturn for L escutcheon, no lever/knob included Used with 2" to 2.5" thick doors. L583-187 Concealed cylinder x lever * Available with “occupied” indicator. Specify with L583-375 and add $18.40 ** Specify door thickness: 1 3/8" or 1 3/4" Note: 1Not available in 612 or 613 finish. Ordering instructions: Specify part number, lever + escutcheon style, finish. Ex: 09-639 03L 626 (full face cylinder, 03 lever, L escutcheon, 626 finish). Price Book 8 Effective April 4, 2020 • Rev. 04/20 229 LM9200-17 Roses LM9200 • Parts Outside Lever Assemblies MULITIPOINT Outside Lever/and Rose/Escutcheon Assemblies 605 606 609 612 613 619 622 625 626 629 630 643e Style Lever Design Standard 016, 026, 03, 056, 06, 07, 12I, 17, 18, OME6 LAT6, LON6 ACCI, ASTI, MERI, STAI Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, M856I, ME16I, ME26I, ME36 • • • • • • • • • • • • • • M576I, M626I • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6Extended Factory Lead Time Ispecify handing Part Number Description Standard Levers Decorative Levers $207 $222 207 N/A 275 290 With A, B or C rose 09-506 Outside Lever assembly With Avanti or Merano Rose LM9200-18 09-655 Outside lever assembly for AST w/Avanti rose or MER w/Merano rose only With L or N Escutcheon 09-550 Blank 09-551 Emergency turn 09-552 Concealed cylinder (L escutcheon only) 09-553 Full face cylinder Ordering instructions: Specify part number, lever style, rose/escutcheon, finish. Ex: 09-506 M53A 626 (outside assembly, M53 lever, A rose, 626 finish). Armor Fronts, LM9200 Series Part Number Description Price Each 24594970 LM9200 Armor Front K110-020 xx Armor front screws; contains (2) K510-210, #8-32 x 1/4" MS PFH; specify finish as xx $73.40 Note: Please specify finish when ordering armor fronts (605, 606, 609, 619, 625, 626, 629, 643e, 630) Price Book 8 230 Effective April 4, 2020 • Rev. 04/20 0.94 Parts • LM9200 Buttons, Thumbturns, Coin Turns, Cylinder Turns, Occupancy Indicators K510-330 09-544 ADA Thumbturn Standard1 09-509 Basic Thumbturn 09-509 L283-124 w/ Large ADA Thumbturn (L583-363) 09-900 605 606 609 612 613 619 622 625 626 629 630 643e Available Finishes Note: L583-363 Suffix Coin Turns L283-124 19 L283-124 23 L283-124 25 L283-124 31 L283-124 37 L283-124 43 L283-124 48 L283-056 19 L283-056 23 L283-056 25 L283-056 31 L283-056 37 L283-056 43 L283-056 48 1 • • • • • • • • • • • • Price Each $15.70 19.70 73.20 LM9200-19 Part Number Description Emergency Button & Emergency Turn Tool K510-330 Emergency Button, L9040 and L9440 L583-233 Emergency turn tool for L9040 and L9440. Specify finish as 458. Basic Thumbturns (Optional) 09-509 027 Basic Thumbturn for sectional trim, 1 3/8"- 1 7/8" door range, extended equally 09-509 033 Basic Thumbturn for sectional trim, >1 7/8"- 2 3/8" door range, extended equally 09-509 040 Basic Thumbturn for sectional trim, >2 3/8"- 2 7/8" door range, extended equally 09-509 047 Basic Thumbturn for sectional trim, >2 7/8"- 3 5/8" door range, extended equally ADA Thumbturns for Sectional Trim 09-544 027 ADA Thumbturn for sectional trim, 1 3/8"- 1 7/8" door range, extended equally1 09-544 033 ADA Thumbturn for sectional trim, >1 7/8"- 2 3/8" door range, extended equally1 09-544 040 ADA Thumbturn for sectional trim, >2 3/8"- 2 7/8" door range, extended equally1 09-544 047 ADA Thumbturn for sectional trim, >2 7/8"- 3 5/8" door range, extended equally1 $73.20 Not available in 612 or 613 finishes. For 612 or 613 finishes, use Large ADA thumbturn 09-500 x L583-363. Also specify 09-509 x L583-363 for thick door applications. Large ADA thumbturn upgrade, specify thumbturn p/n + L583-363 Coin turn, L9044 and L9444, 1 3/8" - 1 1/2" door range, extended equally (EE) Coin turn, L9044 and L9444, 1 5/8" - 1 7/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >1 7/8" - 2 1/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >2 1/8" - 2 5/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >2 5/8" - 2 7/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >2 7/8" - 3 3/8" door range, extended equally (EE) Coin turn, L9044 and L9444, >3 3/8" - 3 5/8" door range, extended equally (EE) Coin turn w/ torx screws, L9044 and L9444, 1 3/8" - 1 1/2" door range, EE Coin turn w/ torx screws, L9044 and L9444, 1 5/8" - 1 7/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >1 7/8" - 2 1/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >2 1/8" - 2 5/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >2 5/8" - 2 7/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >2 7/8" - 3 3/8" door range, EE Coin turn w/ torx screws, L9044 and L9444, >3 3/8" - 3 5/8" door range, EE EE = Extended Equally Note: Coin turns not available in 612 or 613 finish Cylinder Turns I 09-487 xx Cylinder coin turn, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" (replaces XL12-196) 09-900 xx Cylinder turn, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 09-900 xx Cylinder turn, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 09-905 Cylinder turn w/ compression ring and 1/8" blocking ring for 1 3/4" doors I Specify door hand for cylinder turns if used with L463 or L9463. Note: Cylinder turns not available in 629 or 630 finish Add $17.30 to 09-509 price 127.00 138.00 $128.00 125.00 190.00 135.00 198.00 146.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 MULITIPOINT Emergency Button, Thumbturns, Coin Turns & Cylinder Turns 231 LM9200 • Parts Thru-Bolts, Mounting Posts, Springs & Spindles Escutcheon Thru-Bolts 605 606 609 612 MULITIPOINT Available Finishes Part Number • • • Description • 613 619 • • 622 625 626 629 630 643e • Price Each L Escutcheon Thru-bolts: two required per lock L583-119 L escutcheon thru bolts for 1 3/8" door thickness L583-120 L escutcheon thru bolts for 1 3/4" door thickness L583-121 L escutcheon thru bolts for 2" door thickness L583-122 L escutcheon thru bolts for 2 1/4" door thickness L583-123 L escutcheon thru bolts for 2 1/2" door thickness 7.50 L583-287 L escutcheon mounting screws for L9175 half-dummy function 5.70 $6.40 LM9200-20 N Escutcheon Thru-Bolts: two required per lock K510-389 N escutcheon thru bolts for 1 3/4" door thickness K510-390 N escutcheon thru bolts for 2" to 2 1/4" door thickness L583-133 N Escutcheon mounting screws for L0170 single dummy function 7.50 0.96 Ordering instructions: Specify part number and finish. Ex: L583-120 626. Mounting Posts (Ferrules) Part Number Description Price Each L Mounting Posts (Ferrules): two required per lock L583-211 Mounting post for 1 3/8" door thickness L583-212 Mounting post for 1 3/4" door thickness L583-213 Mounting post for 2" door thickness L583-214 Mounting post for 2 1/4" door thickness L583-215 Mounting post for 2 1/2" door thickness L583-216 Mounting post for 2 3/4" door thickness L583-217 Mounting post for 3" door thickness L583-218 Mounting post for 3 1/4" door thickness L583-219 Mounting post for 3 1/2" door thickness $12.10 30.90 LV Mounting Posts (Ferrules): two required per lock L583-497 LV mounting post for 1 3/4" door thickness L583-498 LV mounting post for 2" door thickness L583-499 LV mounting post for 2 1/4" door thickness L583-500 LV mounting post for 2 1/2" door thickness L583-501 LV mounting post for 2 3/4" door thickness L583-502 LV mounting post for 3" door thickness L583-503 LV mounting post for 3 1/4" door thickness L583-504 LV mounting post for 3 1/2" door thickness $25.30 33.40 Ordering instructions: Specify part number. Spindle & Springs Part Number Description Price Each Spindle & Spring Kits (qty two each) L283-198 Spindles and springs for 1-3/8" - 1 7/8" doors $16.50 L283-199 Spindles and springs for 2" - 3 1/2" doors 19.40 Spindles & Springs (qty one each) L283-060 Spindle and spring for 1 3/8" - 1 7/8" doors (two required per lock) $8.20 L283-061 Spindle and spring for 2" - 3 1/2" doors (two required per lock) 10.20 L283-064 Spindle and spring, L0172 full dummy (one required per lock) 14.50 L283-065 Spindle and spring, L0170 half dummy (one required per lock) 7.70 Ordering instructions: Specify part number. Price Book 8 232 Effective April 4, 2020 • Rev. 04/20 • • • • • Lock Cases, Latch Kits, Strikes, Cables & Fire-Rated Components Lock Cases Part Number 24759599 24616914 24759656 24759664 Latch Kits Part Number 24721714 24721722 Cables 1,762.00 1,834.00 2,056.00 2,056.00 Lock Function and Description Top Latch Kit Bottom Latch Kit Price Each $176.00 141.00 Lock Function and Description Top strike - includes strike, strike shims and screw pack (VD 23945223) Bottom strike - includes strike, anchors and screw pack (VD 24664997) LM9200 bottom cable LM9200 top cable, 6'8-7'0" door opening LM9200 top cable, 7'1"-8'0" door opening LM9200 top cable, 8'1"-9'0" door opening LM9200 top cable, 9'1"-10'0" door opening Price Each $43.50 24.60 52.80 52.80 52.80 58.80 58.80 Fire-rated components Part Number 24750408 24756504 24792558 48968887 Lock Function and Description Fire barrier Intumescent for fire barrier Intumescent for armor front Fire pin kit - includes fire pin, fire pin sleeve, fire pin strike, and screws LM9200-21 Part Number 24665002 24664997 24647265 24691750 24691768 24691776 24691784 Price Each $1,586.00 MULITIPOINT 24759623 Lock Function and Description LM9210, Passage LM9225, Exit LM9250, Office/Entry LM9270, Classroom LM9271, Classroom Security LM9280, Storeroom LM9256, Office/Entry w/ auto unlock LM9290/LM9292/LM9294 Electrified LM9291/LM9293/LM9295 Electrified Parts • LM9200 Price Each $150.00 70.30 70.30 158.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 233 LM9200 • Parts Latches and Strikes LM9200-22 MULITIPOINT Miscellaneous Parts Part Number Lock Function and Description 24616922 Link, top, LM9200 Price Each $17.80 24302960 Electrified locking catch, LM9200 15.60 24511081 Spool assembly, LM9200 74.70 24624892 Hub spring, LM9200 13.10 24625642 Retractor, LM9200 15.10 24683542 Tilting link compression spring, LM9200 1.40 24865057 Faceplate tab, LM9200 1 1/4" 29.10 24869893 Electrified link, LM9200 94.80 24869901 Electrified hub, LM9200 80.10 49001704 Capacitor holder, LM9200 21.00 24616930 Link, bottom, LM9200 16.20 24625667 Bell crank cover, LM9200 75.20 24625717 Tilting link, LM9200 20.90 24641714 Turn hub spring, LM9200 16.00 24653917 Lock Case, Subassembly, LM9200 316.00 24653925 Link subassembly, LM9200 313.00 L283-055 Cylinder retainer plate and screw 19.00 L583-015 Latchbolt guide 3.90 L583-748 Retractor hub (2 required per lock) 4.40 L583-020 Retractor hub spacer 4.60 L583-021 Retractor lever 4.00 L583-022 Retractor rocker 3.20 L583-023 Blocking plate 3.90 L583-024 Retractor link 8.20 L583-025 Retractor Crank 8.20 L583-029 Turn Hub 20.30 L583-045 Locking catch 20.70 L583-048 Locking link 4.60 L583-050 Link pin 2.00 L583-454 Case cover screw (7 required) 1.60 L583-485 Lock handing screw 1.90 L583-490 Cylinder retainer 7.40 L283-030 Pack of 20 truarc rings, levers 22.60 L283-031 Mounting Plate, inside lever 20.70 L283-040 Spring Cage (1 required per lever) 10.20 L283-150 Mounting Plate for inside rose trim on one side of door only 41.60 L583-066 Mounting plate screw (2 required per lock) 1.40 Price Book 8 234 Effective April 4, 2020 • Rev. 04/20 Parts • LM9200 Mortise Cylinders Mortise Cylinders Price Each Cam Description Y X Dim. X = .261 Y = .644 274 using sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" Y X Y X Dim. X = .261 Y = .644 Cylinder Only: L & N Escutcheons X Y Dim. X = .261 Y = .644 Cylinder With Compression Ring & Spring: Rose Trim Complete Cylinder Open Restricted $75.00 $93.00 Standard 30-021 Primus Controlled Access 20-793 159.00 Primus XP Controlled Access 20-793-XP 159.00 Primus UL437 20-593 193.00 Primus XP UL437 20-593-XP Standard 30-001 Primus Controlled Access 20-787 Primus XP Controlled Access 20-787-XP 169.00 Primus UL437 20-587 202.00 Primus XP UL437 20-587-XP 202.00 Primus Lockout 20-717 228.00 Primus XP Lockout 20-717-XP 228.00 Primus UL437 Lockout 20-517 245.00 Primus XP UL437 Lockout 20-517-XP 245.00 193.00 86.00 104.00 169.00 LM9200-23 Dim. X = .261 Y = .644 L583-475 For L583-275 cyl. length 1 1/4", For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" 1 1/2", 1 3/4" L583-275 For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" Cylinder Mechanism MULITIPOINT L583-474 L583-274 For cyl. length 1 1/8", For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" 1 3/8", 1 5/8" Price Book 8 Effective April 4, 2020 • Rev. 04/20 235 LM9200 • Parts Allegion Connect Harnesses Allegion Connect Harnesses - Prices listed are net, discounting does not apply Part Number Description Price Each MULITIPOINT Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors) CON-6 6" Wire Harness (internal p/n 106190-00) $10.80 CON-12 12" Wire Harness (internal p/n 106191-00) 14.40 CON-26 26" Wire Harness (internal p/n 106192-00) 16.30 CON-32 32" Wire Harness (internal p/n 106193-00) 17.40 CON-38 38" Wire Harness (internal p/n 106194-00) 19.10 CON-44 44" Wire Harness (internal p/n 106195-00) 18.50 CON-50 50" Wire Harness (internal p/n 106196-00) 19.10 CON-192 192" Wire Harness (internal p/n 106197-00) 45.50 LM9200-24 Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors) CON-6P CON-12P CON-26P CON-32P CON-38P CON-44P CON-50P CON-192P 6" Wire Harness (internal p/n 106201-00) 12" Wire Harness (internal p/n 106202-00) 26" Wire Harness (internal p/n 106203-00) 32" Wire Harness (internal p/n 106204-00) 38" Wire Harness (internal p/n 106205-00) 44" Wire Harness (internal p/n 106206-00) 50" Wire Harness (internal p/n 106207-00) 192" Wire Harness (internal p/n 106208-00) $13.80 17.40 19.10 20.40 20.90 21.50 22.20 47.90 Harness with Molex Connector on one end, stripped leads on other (for connection to power supply) CON-6W 6" extension to power supply (internal p/n 106210-00) $13.80 Connector Service Kit (internal p/n 050823-00-00) contains: -100 each male & female terminals -10 each 4-pin and 8-pin male connectors -10 each 4-pin and 8-pin female connectors - 1 extraction tool" $114.00 Service Kit CON-KIT Price Book 8 236 Effective April 4, 2020 • Rev. 04/20 CS Series GRADE 2 INTERCONNECT LOCK INTERCONNECTED CS210-1 H-Series S200-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 237 CS Series To order Schlage products, descriptive data should be in the same sequence as shown below. Line Item Qty 1 10 Outside Inside Escutcheon Function Cyl Type DES FIN DES FIN DES CS210-B60 P SAT 626 ACC 605 CAM Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: CS210-2 INTERCONNECTED GRADE 2 INTERCONNECT LOCK Latch: Strike: Dr Thk: Ext: Latch FIN Handing DES FIN DES FIN 605 134 RH 12-339 606 10-109 605 Line item number Quantity Product function + Cylinder code Outside lever design Outside finish Inside lever design: Specify only if different from the outside lever design Inside lever finish: Specify only if different from the outside finish Default handing for the CS210 is right hand (RH). Handing is field reversible. Handing instructions are required on the following levers due to their design: Accent, Avanti, Callington, Champagne, Flair, Manhattan, Merano and St. Annes. When specifying handing, only one handing allowed per line item. Example: RH = right hand, LH = left hand, Product latch: Leave blank for standard latch or specify part number if non-standard latch is required. Product strike: Leave blank for standard strike or specify part number if non-standard strike is required. Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8" Extension: Enter for 1 3/8" doors. Example: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended differently Dimension: Enter only for non-standard strike lip length H-Series Dim: Additional Details: Enter additional detail for keying information or special requirements S200-Series Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 238 Strike Dr Thk Effective April 4, 2020 • Rev. 04/20 Introduction CS210 Product Identification Table of Contents D = Deadlatch Cylinder Suffix P P6 L R J M T B BDC G7 H = = = = = = = = = = = Conventional, 6 Pin/Keyed 5 Conventional, 6 pin Less Conventional, 6 Pin FSIC Less FSIC SL - FSIC FSIC - Construction Core Less SFIC Disposable Construction SFIC Everest 29 Patented SFIC Refundable Construction SFIC Conventional Cylinder, Z = SL 7 pin Function B500 = Commercial B60 = Residental Lock Series H-Series Contact your local RSO or Sales Rep. for ordering details Latch Suffix CS210-3 BAA/ARRA CS 210-500 P D INTERCONNECTED Functions CS210-4 CS210-5 Complete Locks Options CS210-8 CS210-8 Deadbolts/Deadlatches Deadbolt Strikes CS210-8 CS210-8 Strike Combinations Locks Less Components CS210-8 Parts CS210-9 Deadbolts CS210-9 CS210-9 Deadlatches Deadbolt/Deadlatch Combinations CS210-9 CS210-9 Deadbolt Strikes Deadlatch Strikes CS210-9 Deadbolt/Deadlatch Strike Combinations CS210-9 CS210-10 Components Miscellaneous Subassemblies/ CS210-10 Components CS210-10 Screw/Screw Packs CS210-10 Cylinders See Cylinders Section Complete Cylinders How To Order Forms & Examples Finish Codes and Descriptions Description Bright Brass Antique Brass Satin Nickel Matte Black Bright Chromium Plated Satin Chromium Plated Aged Bronze S200-Series Code 605 (US 3) 609 (US 5) 619 (US 15) 622 (US 19) 625 (US 26) 626 (US 26D) 643e (US 11) Standard Features Certification: ANSI/BHMA Certified A156.12-2013, Grade 2, UL listed for 3-hour fire door With SFIC interchangable core cylinders: Grade 3 Security Deadbolt: 1 X 2-1/4", dual option faceplate, (square corner standard, round corner included in package), 1" housing diameter, 1" throw Latch 1" x 2-1/4" dual option faceplate (square corner standard, round corner included in package). 1" edge bore required Strikes: 1-1/8" X 2-3/4", Square corner (deadbolt) and 1-5/8" X 2-1/4", Square corner, full lip, no box, 1 5/8" x 2 1/4" (Deadlatch) Backset: Adjustable backset, fits 2-3/8" or 2-3/4" Cylinders: 6-pin, solid brass, keyed 6-pin, S123 keyway, keyed different (KD) Door Range: 1-3/4" to 2" standard (1-3/8" available, must be specified) Keys: Nickel silver cut keys, 6-pin, S123 section Center to Center: Fits 4" or 5 1/2" (factory default) center to center door preps Price Book 8 Effective April 4, 2020 • Rev. 04/20 239 CS210 • Functions SCHLAGE ANSI CS210PD F95 Entrance, Single Locking Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. S200-Series H-Series CS210-4 INTERCONNECTED ANSI/BHMA Certified A156.12-2013, Grade 2, UL Listed for 3-hour fire door. Price Book 8 240 Effective April 4, 2020 • Rev. 04/20 Complete Locks • CS210 Accent (ACC) Avanti (AVA) Broadway (BRW) Boardwalk (BRK) Champagne (CHP) Elan (ELA) ISpecify hand Callington (CLT) ISpecify hand ISpecify hand Jazz (JAZ) Jupiter (JUP) Latitude (LAT) Manhattan (MNH) Merano (MER) Neptune (NEP) CS210-5 Flair (FLA) INTERCONNECTED ISpecify hand Avila (VLA) ISpecify hand ISpecify hand ISpecify hand S200-Series Saturn (SAT) H-Series Longitude (LON) St. Annes (STA) ISpecify hand Roses Inside/Outside Rose - Saturn Levers: JUP, NEP, SAT Size: 2 1/2" dia. Outside Rose - Plymouth Levers: ACC, AVA, VLA, BRK, BRW, CLT, CHP, ELA, FLA, JAZ, LAT, LON, MNH, MER, STA Size: 2 1/2" dia. Price Book 8 Effective April 4, 2020 • Rev. 04/20 241 CS210 • Complete Locks Escutcheons Plymouth (PLY) H-Series CS210-6 INTERCONNECTED Camelot (CAM) Latches 12-340 16-260 Strikes, Deadbolts 10-092 10-095 10-026 Standard 10-027 S200-Series 10-094 Standard Strikes, Deadlatches 10-001 Price Book 8 242 Effective April 4, 2020 • Rev. 04/20 10-116 Complete Locks • CS210 Function Description Primary Cylinder Adjustments Available Levers Available Finishes Design and Finishes Keyed, Single Cylinder CS210-B500 Entrance with Commercial Spin Ring CS210-B60** Entrance with Residential Spin Ring RD TD* JD BD BDC GD HD* ALL 605 609 619 625 626 643e 626 605 609 619 622 625 643e LD CD RD TD JD 424 436 -65 39 -36 BD BDC GD HD N/C 87 45 N/A N/A N/A EVEREST AND RESTRICTED KEYWAY SECONDARY CYLINDER ADJUSTMENT * ** EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +18 SL Cylinder with Everest B or Everest R keyways +18 INTERCONNECTED IACC IAVA VLA ICLT ICHP ELA IFLA JAZ JUP LAT IMNH IMER NEP SAT ISTA BRK BRW LON LD CD Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. B60 spin ring accepts the KIL and FSIC formats only CS210-7 H-Series S200-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 243 Deadbolts/Deadlatches, Deadbolt Strikes, Strike Combinations, Locks Less Components CS210 • Options Deadbolts/Deadlatches Combo Part Number Deadbolt INTERCONNECTED 12-339 12-340 Deadlatch 16-260 Backset - Hsg Dia. - Description 2 3/8" or 2 3/4" - 1" - Dual Option, 1" x 2 1/4", standard (square corner standard, round corner included in the package) Lock Adjustment N/C Deadbolt Strikes Part Number Lip Length - Description 10-094 N/A - Square corner, 1 1/8" x 2 3/4" 10-092 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-095 1 1/8" - 1/4" Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-116 N/A - Round corner strike, no lip, 1 1/8" X 2 3/4" Lock Adjustment N/C Deadlatch Strikes Lip Length - Description CS210-8 Part Number 10-001 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" N/C Strike Combinations Deadlatch Strike Specify Combo Number 10-094 10-001 10-109 10-094 10-026 10-121 10-116 10-027 10-122 H-Series Deadbolt Strike 10-092 10-027 10-123 10-095 10-026 10-124 Add to Lock Price N/C Locks Less Components S200-Series Description Specify Less deadbolt strike N/C Less deadlatch strike LLL for deadlatch strike Example: CS210PD SAT 12-339 LLL/10-094 N/C Less both levers LLL for both Levers Example: CS210PD LLL/SAT LLL Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 244 Lock Adjustment LLL for deadbolt strike Example: CS210PD SAT 12-339 LLL/10-001 Effective April 4, 2020 • Rev. 04/20 -$12.10 Deadbolts, Deadlatches, Deadbolt/Deadlatch Combinations, Deadbolt Strikes, Deadlatch Strikes, Deadbolt/Deadlatch Strike Combinations Parts • CS210 Deadbolts Available Finishes - Specify for Listed Parts 605 609 619 • 12-340, 12-291, 12-633 • • 622 625 626 643e • Backset - Description 12-340 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4 Round corner, 1"x 2 1/4", included 12-291 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 43.30 12-633 5" - Square corner, 1 1/8" x 2 1/4" 95.60 • • • Price Each INTERCONNECTED Part Number $43.30 Deadlatches Available Finishes - Specify for Listed Parts 605 609 619 • 16-260, 16-228, 16-132 • • 622 625 626 643e • Part Number Backset - Description 16-260 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4" Round corner, 1"x 2 1/4", included 16-228 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 37.00 16-132 5" - Square corner, 1 1/8" x 2 1/4" 48.00 • • • Price Each $38.50 CS210-9 Deadbolt/Deadlatch Combinations Available Finishes - Specify for Listed Parts 605 609 619 • 12-339, 16-483, 16-484 Part Number Backset - Description Deadbolt Deadlatch 12-339 2 3/8" or 2 3/4" - Dual Option, 1" x 2-1/4" 12-340 16-260 16-483 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 12-291 16-228 16-484 5" - Square corner, 1" x 2 1/4" 12-633 16-132 • • 622 625 626 643e • • • • Price Each $80.30 143.00 H-Series Deadbolt Strikes Available Finishes - Specify for Listed Parts 605 609 619 • 10-094, 10-092, 10-095 Part Number Lip Length - Description 10-094 N/A - Square corner, 1 1/8" x 2 3/4" 10-092 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-095 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" • • 622 625 626 643e • • • • Price Each $12.20 7.90 N/A - Round corner strike, no lip, 1 1/8" X 2 3/4" 13.70 Strike reinforce, use with 10-094 and 10-116 16.20 S200-Series 10-116 37-016 Deadlatch Strikes Available Finishes - Specify for Listed Parts 605 609 619 • 10-001, 10-026, 10-027 Part Number Lip Length - Description 10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" • • 622 625 626 643e • • • • Price Each $6.50 7.60 Deadbolt/Deadlatch Strike Combinations Available Finishes - Specify for Listed Parts 605 609 619 • 10-109, 10-121, 10-122, 10-123, 10-124 Part Number • • 622 625 626 643e • Deadbolt Strike Deadlatch Strike Price Each 10-109 10-094 10-001 1 1/8" lip $18.80 10-121 10-094 10-026 18.80 21.30 10-122 10-116 10-027 10-123 10-092 10-027 10-124 10-095 10-026 • • • 15.50 Price Book 8 Effective April 4, 2020 • Rev. 04/20 245 CS210 • Parts Finished Trim Subassemblies/Components, Miscellaneous Subassemblies/Components, Screw/Screw Packs, Cylinders Finished Trim Subassemblies/Components Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e • S206-501, S206-516, S206-515, S206-518, S206-517, 08-029, F506-864, F206-493 06-242 CS210-10 INTERCONNECTED Part Number S206-501 S206-516 S206-515 S206-518 S206-517 S206-523 08-029* ** B300-057 B300-058 F506-864 F206-493 06-242** F506-864 F206-493 06-242** ** H-Series • • • • • • Description Price Each Assembly, cylinder, DB, OUTSIDE, CS200 $61.80 Assembly, housing, cylinder, IC, THIN DOOR, CS200 242.00 Assembly, housing, cylinder, IC, CS200 223.00 Assembly, housing, cylinder, SFIC, THIN DOOR, CS200 155.00 Assembly, housing, cylinder, SFIC, CS200 135.00 Assembly, outside cylinder housing, SFIC, CS200 118.00 Rose SAT PLY (Snap On Only) 13.40 Assembly, outside cylinder housing, FSIC CS200 118.00 Assembly, outside cyliinder housing, CS200 118.00 Escutcheon CAM PLY 97.50 Plate, escutcheon assembly 49.10 Kit, levers 60.30 Escutcheon CAM PLY 94.70 Plate, escutcheon assembly 49.10 Kit, levers 60.30 * Rose - Lever Combination Saturn - Saturn, Neptune, Jupiter Plymouth - Accent, Avanti, Avila, Callington, Champagne, Elan, Flair, Jazz, Jupiter, Latitude, Manhattan, Merano, St. Annes The CS200 product line transitined from crimp-on roses (not removeable) to snap on roses (removable) in AUGUST 2015. The Rose Lever Combination needs to be considered for changing levers for locks with crimp-on roses. Snap-on roses can be identified by retention dimples at the base of the rose. If not compatible, an outside chassis with a crimp-on rose can be updated with the following items: - 06-242 Kit, levers - 08-029 Rose SAT PLY (Snap on) - A501-945 Ring reinf rose - F206-496 Outside Chassis Assy, Interconnect S200-Series Miscellaneous Subassemblies/Components Part Number Description S206-502 Interconnect assembly, mechanical Price Each F206-494 Inside chassis assembly, interconnect 38.80 F206-496 Outside chassis assy, interconnect 36.40 A501-945 Ring reinf rose, LUN-ORB-TUL 0.56 F506-878 Driver bar 3.50 F506-867 Handing Plate 3.30 $102.00 Screw/Screw Packs Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e • B202-578, S206-504 Part Number Description B202-578 • • • • Contents Price Each Latch and strike (4) C603-897 $8.60 S206-504 Chassis & trim (2) B600-101 (2) B520-621 (2) F506-278 6.70 S206-505 Chassis & Trim, Thick Door (2) B600-10 (2) B520-621 (2) F506-278 6.70 - 0.60 B502-873* Screw, reinf. strike * • Order in multiples of 100 Cylinder Reference Table Available Finishes - Specify for Listed Parts 22-093 Part Number Cylinder Mechanism 22-093 Standard Function Design Standard Functions All Price Book 8 246 Effective April 4, 2020 • Rev. 04/20 606 613 622 643e 626 613 622 643e Price Each Open $65.00 Price Each Restricted $83.00 • S200 Series INTERCONNECT LOCK S200-Series Exploded View - S251PD INTERCONNECTED Mounting screws Interconnect assembly Deadbolt 1" Throw Inside escutcheon 2 1/2" Adapter ring 1" Hardened steel insert 1" Trim ring 1/8" Hardened steel insert CS200-Series Wood frame reinforcer With #12 x 3" wood screws 1/8" Trim ring Cylinder bar Cylinder housing H-Series Box 6-Pin cylinder Strike Outside lever 6-Pin cylinder S200-1 Outside chassis and rose Box Universal deadlatch 1/2" Throw Strike Inside chassis and lever Door Preparation 1-1/8" 2-3/8" 29mm 60mm 2-1/4" 57mm 2-1/4" 57mm 1-1/2" 4" 38mm 102mm 2-1/8" 54mm 1" dia. (25mm) 2 holes Price Book 8 Effective April 4, 2020 • Rev. 04/20 247 S200 Series To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 10 Line Item: Qty: Product: Outside Des: Inside Product DES FIN DES FIN Hand Latch Strike Dr Thk Ext DIM Additional Details S251PD NEP 626 FLA 613 RH 12-339 10-109 - - - - Line item number Quantity Product function + Cylinder code Outside lever design (Choice of lever determines escutcheon. Saturn, Neptune and Jupiter levers default to the Saturn escutcheon. The Flair lever defaults to the Flair escutcheon.) Outside finish Inside lever design: Specify only if different from the outside lever design Inside lever finish: Specify only if different from the outside finish (Lever selection determines escutcheon) Hand of door: Only one hand allowed per line item. Example: RH=right hand, LH=left hand, RR=right reverse, LR=left reverse Product latch: Leave blank for standard latch or specify part number if non-standard latch is required. Product strike: Leave blank for standard strike or specify part number if non-standard strike is required. Door thickness: N/A for S200 line Extension: N/A for S200 line Dimension: Enter only for non-standard strike lip length Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Dim: Additional Details: Enter additional detail for keying information or special requirements H-Series CS200-Series INTERCONNECTED INTERCONNECT LOCK S200-2 Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. 6 denotes a lock or part that requires an extended lead time. 5. I denotes a handed product and requires handing to be specified. 6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 8. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 11. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 14. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 248 Effective April 4, 2020 • Rev. 04/20 Introduction S200 Table of Contents Product Identification 51 P D Latch Suffix D = Deadlatch Cylinder Suffix P P6 L R J M T Z = = = = = = = = Conventional, 6 Pin/Keyed 5 Conventional, 6 pin Less Conventional, 6 Pin FSIC Less FSIC SL - FSIC FSIC - Construction Core SL Conventional Cylinder, 7 pin CS200-Series Function Lock Series Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Oil Rubbed Bronze Satin Nickel Bright Chromium Plated Satin Chromium Plated S200-3 Code 605 (US 3) 606 (US 4) 609 (US 5) 613 (US 10B) 619 (US 15) 625 (US 26) 626 (US 26D) H-Series BAA/ARRA Contact your local RSO or Sales Rep. for ordering details S2 INTERCONNECTED Functions S200-4 Complete Locks S200-5 Options S200-7 Deadbolts/Deadlatches S200-7 Deadbolt Strikes S200-7 Deadlatch Strikes S200-7 S200-7 Strike Combinations Locks Less Components S200-7 Primus® / Primus XP S200-7 Parts S200-8 Levers and Related Parts S200-8 Escutcheons S200-8 Trim Combinations S200-8 Deadbolts S200-8 Deadlatch S200-9 S200-9 Deadbolt/Deadlatch Combinations Deadbolt Strikes S200-9 S200-9 Deadlatch Strikes Deadbolt/Deadlatch Strike Combinations S200-9 Miscellaneous Parts/Adapters S200-10 S200-10 Screws Screw Packs S200-10 S200-10 Cylinders Complete Cylinders See Cylinders Section Forms & Examples How To Order Standard Features Certification UL Listed for 3-hour fire door. Deadbolt 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1" throw Deadlatch 1 x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw Strikes 1 1/8" x 2 3/4", Square corner, box (deadbolt) and 1 1/8" x 2 3/4", Square corner, T-strike, box (deadlatch) Reinforcement Metal dust box reinforcer with three – 3" screws Backset Adjustable for 2 3/8" or 2 3/4" Cylinder(s) 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, S123 keyway, keyed different (KD) — upper and lower cylinders are keyed alike Door Range 1 3/8" – 2" Keys Two nickel silver cut keys per lock, 6-pin, S123 section Price Book 8 Effective April 4, 2020 • Rev. 04/20 249 S200 • Functions UL Listed for 3-hour fire door. ANSI SCHLAGE ANSI S210PD F95 Entrance, Single Locking Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. S280PD F98 Storeroom Lock Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Outside lever fixed when locked. Entrance by key unlocking lever for access. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. Latch automatically deadlocks when door is closed. S251PD Entrance, Double Locking Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Outside lever unlocked by key from outside when locked by turn button in inside lever. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. Latch automatically deadlocks when door is closed. S290 Single Dummy Trim Dummy trim for inside of door. Used for door pull or as matching inactive trim. CS200-Series INTERCONNECTED SCHLAGE Classroom Lock Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Outside lever is locked and unlocked by key from outside. Turning inside lever retracts deadbolt and latch simultaneously for immediate exit. Latch automatically deadlocks when door is closed. S200-4 H-Series S270PD F97 Price Book 8 250 Effective April 4, 2020 • Rev. 04/20 Complete Locks • S200 Neptune (NEP) Saturn (SAT) Jupiter (JUP) Flair (FLA) INTERCONNECTED Specify hand Commercial Lever Suite S200 Lock Jupiter Neptune Saturn Flair S Lock Jupiter Neptune Saturn Flair 98/99 Exit 07 17 06 Asti ND Levers Athens Sparta Rhodes AL Lock Jupiter Neptune Saturn L Lock Levers 07 17 06 Asti Escutcheons Flair (FLA) CS200-Series Saturn (SAT) Used with FLA lever. Used with NEP, SAT and JUP levers. H-Series Latches 12-288 16-480 S200-5 Strikes, Deadbolts 10-094 10-064 10-092 10-095 10-112 Strikes, Deadlatches 10-001 10-026 10-027 10-058 Price Book 8 Effective April 4, 2020 • Rev. 04/20 251 S200 • Complete Locks Design and Finishes Primary Cylinder Adjustments Available Levers Available Finishes SAT JUP NEP IFLA INTERCONNECTED Function Description 626 605 606 6609 619 625 613 325 331 341 Keyless LD ALL S290 Single Dummy S210PD Entrance 512 524 542 Keyed, Double Cylinder S251PD Entrance S270PD Classroom S280PD Storeroom 668 680 698 SAT JUP NEP RD TD JD -65 39 -36 LD CD RD TD JD -130 78 -72 EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS CS200-Series EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +18.00 SL Cylinder with Everest B or Everest R keyways +18.00 PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPERATELY (PRICES BELOW) Secondary Cylinder Adjustment SINGLE KIL EXAMPLE: 1 EA. S210LD & 1 EA. 24-769(-XP) +145.00 DOUBLE KIL EXAMPLE: 1 EA. S251LD & 1 EA. 24-769(-XP) 1 EA. 20-752(-XP) +290.00 SINGLE FSIC EXAMPLE: 1 EA. S280JD & 1 EA. 20-740(-XP) +157.00 DOUBLE FSIC EXAMPLE: 1 EA. S251JD & 2 EA. 20-740(-XP) +314.00 Temporary cores (TD option) require non-refundable core handling charge (50-231) of $10.70 and will be added to the price of the lock. S200-6 H-Series * Price Book 8 252 Effective April 4, 2020 • Rev. 04/20 JD 605 606 6609 613 619 625 LD Keyed, Single Cylinder RD TD* Deadbolts/Deadlatches, Deadbolt Strikes, Deadlatch Strikes, Strike Combinations Options • S200 Deadbolts/Deadlatches Combo Part Number Deadlatch 12-288 16-480 2 3/8" or 2 3/4" - 1" - Square corner, 1" x 2 1/4" Backset - Hsg Dia. - Description 16-482 12-289 16-204 2 3/8" or 2 3/4" - 1" - Round corner, 1" x 2 1/4" 16-483 12-291 16-228 2 3/8" or 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 16-484 12-633 16-132 5" - 1" - Square corner, 1 1/8" x 2 1/4", deadbolt, and square corner, 1" x 2 1/4", deadlatch (Includes G506-815 housing sleeve for latch and bolt for 1 1/8" preparation Lock Adjustment INTERCONNECTED Deadbolt 16-481 N/C +34.10 Deadbolt Strikes Part Number Lip Length - Description 10-094 N/A - Square corner, 1 1/8" x 2 3/4" 10-064 N/A - Circular drive-in, thimble strike, 1 3/16" diameter, 494 (626 only) 10-092 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-095 1 1/8" - 1/4" Square corner, full lip, no box, 1 5/8" x 2 1/4" Lock Adjustment N/C CS200-Series Deadlatch Strikes Lip Length - Description Part Number 10-001 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-058 1 7/32" - Circular, adjustable, 1 3/4" diameter (605 & 626 only) N/C Strike Combinations Specify Combo Number Deadlatch Strike 10-001, 1 1/8" Lip 10-109 10-064 10-001, 1 1/8" Lip 10-251 10-094 10-026 10-110 10-064 10-026 10-253 10-094 10-027 10-111 10-064 10-027 10-256 10-092 10-027 10-257 10-064 10-058 10-258 10-095 10-026 10-259 Add to Lock Price N/C S200-7 10-094 H-Series Deadbolt Strike Locks Less Components Description Specify Lock Adjustment Less deadbolt LLL for deadbolt strike Example: S251PD NEP 626 LLL/16-480 10-109 -21.80 Less deadlatch LLL for deadlatch strike Example: S251PD NEP 626 12-288/LLL 10-109 -25.10 Less deadbolt strike LLL for deadbolt strike Example: S251PD NEP 626 16-481 LLL/10-001 -2.50 Less deadlatch strike LLL for deadlatch strike Example: S251PD NEP 626 16-481 10-094/LLL -5.60 Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 253 S200 • Parts Levers and Related Parts, Escutcheons, Trim Combinations, Deadbolts Levers and Related Parts Available Finishes - Specify for Listed Parts INTERCONNECTED 605 606 609 • 08-020, 08-027, 08-030 Part Number Description 08-020* Lever - keyed, JUP NEP SAT IFLA 08-027 • 6 613 619 • • 81.10 Lever - FSIC, driver, retainer (converts PD to JD), JUP NEP SAT 97.90 S605-242 Full size core driver 9.90 S605-241 Full size core retainer 4.50 Lever insert for FSIC 4.20 * • $80.60 Lever - FSIC, JUP NEP SAT S605-194 • Price Each 08-030* * 625 626 Specify part number, style & finish. Ex: 08-020 SAT 626 Escutcheons Available Finishes - Specify for Listed Parts • 08-032 CS200-Series 605 606 609 Part Number Description 08-032 Inside escutcheon assembly SAT FLA • 6 613 619 • • 625 626 • • Price Each $119.00 Trim Combinations Available Finishes - Specify for Listed Parts • 68-001, 68-003, 68-004, 08-034, 08-035 H-Series 605 606 609 • 6 613 619 • • Part Number Description 68-001* S210 - Outside Chassis, Rose and Lever JUP NEP SAT IFLA 68-003* S251, S270 - Outside chassis and rose assembly for S51 and S70 function. Requires outside lever 68-004* S280 - Outside Chassis and Rose SAT 08-034* S210, S270, S280 - Inside Chassis and Lever JUP NEP SAT IFLA 121.00 08-035* S251 - Inside Chassis and Lever JUP NEP SAT IFLA 136.00 * 625 626 • • Price Each $114.00 88.50 Specify part number, style & finish. Ex: 68-001 JUP 626 Deadbolts Available Finishes - Specify for Listed Parts S200-8 39-030 • 6 613 619 • • • Part Number Backset - Description 12-288 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4" Price Each 12-289 2 3/8" or 2 3/4" - Round corner, 1"x 2 1/4" 12-291 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 43.30 12-633 5" - Square corner, 1 1/8" x 2 1/4" 95.00 39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations. 59.80 $36.00 Price Book 8 254 605 606 609 • • 12-288, 12-289, 12-091, 12-633 Effective April 4, 2020 • Rev. 04/20 625 626 • • Deadlatch, Deadbolt/Deadlatch Combinations, Deadbolt Strikes, Deadlatch Strikes, Deadbolt/Deadlatch Strike Combinations Parts • S200 Deadlatch Available Finishes - Specify for Listed Parts 605 609 619 39-030 • 622 625 626 643e • 6 Part Number Backset - Description 16-480 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4" 16-204 2 3/8" or 2 3/4" - Round corner, 1"x 2 1/4" 16-228 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 16-132 5" - Square corner, 1 1/8" x 2 1/4" 48.00 39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preparations. 59.80 • • • • INTERCONNECTED • • 16-480, 16-204, 16-228, 16-132 Price Each $37.00 Deadbolt/Deadlatch Combinations Available Finishes - Specify for Listed Parts 605 609 619 • 16-481, 16-482, 16-483, 16-484 Part Number Backset - Description Deadbolt • 625 626 643e • 6 Deadlatch 622 • • • Price Each $73.00 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4" 12-288 16-480 2 3/8" or 2 3/4" - Round corner, 1"x 2 1/4" 12-289 16-204 73.00 16-483 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 12-291 16-228 80.30 16-484 5" - Square corner, 1" x 2 1/4" 12-633 16-132 143.00 CS200-Series 16-481 16-482 Deadbolt Strikes Available Finishes - Specify for Listed Parts 605 609 619 • 10-094, 10-064, 10-092, 10-095 Part Number Lip Length - Description 10-094 N/A - Square corner, 1 1/8" x 2 3/4" 10-064 N/A - Circular drive-in, thimble strike, 1 3/16" diameter, 494 (626 only) 10-092 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-095 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 10-112 N/A - Metal dust box with screws • 622 625 626 643e • 6 • • • Price Each $12.20 H-Series 17.20 7.90 12.10 Deadlatch Strikes Available Finishes - Specify for Listed Parts 605 609 619 Part Number Lip Length - Description 10-001 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4", 10-027 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 10-058 1 7/32" - Circular, adjustable, 1 3/4" diameter, 605 and 626 only • 625 626 643e • 6 • • • • S200-9 • • 10-001, 10-026, 10-027 10-058 622 Price Each $6.50 7.60 10.90 Deadbolt/Deadlatch Strike Combinations Available Finishes - Specify for Listed Parts 605 609 619 • 10-109, 10-251, 10-110, 10-253, 10-111, 10-256, 10-257, 10-258, 10-259 Part Number Deadbolt Strike • 6 622 625 626 643e • Deadlatch Strike Price Each $18.70 10-109 10-094 10-001, 1 1/8" lip 10-251 10-064 10-001, 1 1/8" lip 23.70 10-110 10-094 10-026 19.80 10-253 10-064 10-026 24.80 10-111 10-094 10-027 19.80 10-256 10-064 10-027 24.80 15.50 10-257 10-092 10-027 10-258 10-064 10-058 28.10 10-259 10-095 10-026 15.50 • • • Price Book 8 Effective April 4, 2020 • Rev. 04/20 255 S200 • Parts Miscellaneous Parts/Adapters, Screws, Screw Packs, Torx Screw Packs, Cylinders Miscellaneous Parts/Adapters INTERCONNECTED Part Number Description Price Each G506-815 1" Long bolt or latch housing sleeve to adapt 7/8" diameter housing to 1" bore $7.10 08-000 Interconnect assembly 112.00 F506-867 Rotational stop 3.30 Screws Available Finishes - Specify for Listed Parts 605 606 609 • C603-897, S605-297 Part Number Description • 6 613 619 • • Type Size Price Each PFH Cross Recess 10-32 x 2 1/4" $1.40 PFH Combo #8 x 3/4" 0.92 B502-998* Mounting, upper cylinder C603-897* Latch and strike S605-289* Mounting, lower chassis PFH 8-32 x 1 1/4" 1.60 S605-297* Escutcheon (2 req.) POH 6-32 x 3/8" 1.90 * 625 626 • • Order in multiples of 100 CS200-Series Screw Packs Available Finishes - Specify for Listed Parts 605 606 609 • S306-151 Part Number S306-151 Description Mounting screws • 6 613 619 • • Contents Price Each (2) S605-289 (2) B502-998 $10.30 625 626 • • Torx Screw Packs Available Finishes - Specify for Listed Parts 605 606 609 • H-Series C203-311 Part Number C203-311* Description Latch and strike (2 req.) • 6 613 619 • • Contents Price Each (4) C503-766 (T-15) $21.90 625 626 • * Torx screw packs are furnished with appropriate T-xx installation tool(s) Cylinder Reference Table Available Finishes - Specify for Listed Parts S200-10 21-059, 20-752/XP, 20-552/XP, 22-081, 24-769/XP, 24-569/XP Part Number Cylinder Mechanism Function 626 Price Each Open Price Each Restricted $65.00 21-059 Standard 91-007 Standard SL 20-752 Primus 20-752-XP Primus-XP 91-722-XP Everest SL Primus XP (R/B Keyways only) 20-552 Primus UL437 20-552-XP Primus UL437-XP 22-081 Standard - 6-pin 24-769 Primus 24-769-XP Primus-XP 91-729-XP Everest SL Primus XP (R/B Keyways only) 24-569 Primus UL437 24-569-XP Primus UL437-XP Keyed Levers $83.00 145.00 145.00 All 179.00 65.00 83.00 145.00 Deadbolts 145.00 179.00 Price Book 8 256 Design 606 Effective April 4, 2020 • Rev. 04/20 • LT Series GRADE 2 TUBULAR LEVERED LOCK TUBULAR Lever and bushing assembly (2) Privacy lock only Rose Privacy rose (2) LT-1 Mounting plate assembly Spindle assembly Spring cage assembly Spanner wrench Privacy pin Door plate S-Series Passage latch Pin wrench Door plate Latch faceplate and screws Spring cage assembly Alignment collar Lever and bushing assembly (2) Inside mounting plate Privacy latch Mounting screws (2) Rose (2) Strike and screws Price Book 8 Effective April 4, 2020 • Rev. 04/20 257 LT Levers Ordering Procedures Outside Line Item Qty 1 10 Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Dim: Additional Details: Product DES FIN LT40 M63B 630 Inside DES FIN Hand Latch Strike Dr Thk THP-8201 10-004 2" Enter any special requirements Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs are not available for the LT Series. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. Price Book 8 258 Ext DIM Additional Details Line item number Quantity Product function Lever design + rose code Finish Not applicable for the LT Series, leave blank. (mixed trim not available) Not applicable for the LT Series, leave blank. (mixed trim not available) Specify RH or LH for single dummy functions only (universal design does not require handing on functions with two levers) Product latch, leave blank for standard latch or specify part number if non-standard Product strike, leave blank for standard strike or specify part number if non-standard Door thickness, leave blank for standard thickness or specify if non-standard (2" maximum) Not applicable for the LT series, leave blank. Not applicable for the LT Series, leave blank. S-Series LT-2 TUBULAR To order Schlage LT locks, descriptive data should be in the same sequence as shown below. Effective April 4, 2020 • Rev. 04/20 Introduction LT Product Identification Table of Contents LT 40 F UL Fire Rated (optional) TUBULAR Functions LT-4 Complete Locks LT-4 Options LT-8 Parts LT-9 Levers, Roses, and Latches & Strikes LT-9 Miscellaneous Parts LT-10 How To Order Forms & Examples Function Lock Series Finish Codes and Descriptions LT-3 Code Description 605 (US3) Bright Brass 606 (US4) Satin Brass 609 (US5) Antique Brass 619 (US15) Satin Nickel 622 (US19) Matte Black 625 (US26) Bright Chromium Plated 626 (US26D) Satin Chromium Plated 626AM Antimicrobial Coating on Satin Chromium 629 (US32) Bright Stainless Steel 630 (US32D) Satin Stainless Steel 630AM Antimicrobial Coating on Satin Stainless Steel 643e (US11) Aged Bronze S-Series Standard Features Locks are furnished with standard features unless otherwise specified. Certification ANSI/BHMA Certified ANSIA156.2-2011, Series 4000, Grade 2. Available UL Listed for 20 minute fire door. Latch 1 1/8" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw Strike 1 1/8" x 2 3/4", Square corner, T-strike, Box Backset 2 3/4" standard, 2 3/8" optional Door Range 1 3/8" - 1 3/4" Price Book 8 Effective April 4, 2020 • Rev. 04/20 259 LT • Functions ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, Available UL listing Non-Keyed Locks SCHLAGE ANSI SCHLAGE ANSI LT10 Passage Latch LT170 Single Dummy Trim LT40 Privacy Lock LT172 Pair Dummy Trim TUBULAR Both levers always unlocked. LT-4 Both levers unlocked unless outside lever locked by push-button on inside rose. Turning inside lever or inserting emergency key into outside rose unlocks outside lever. Restoring feature unlocks outside lever by closing the door. Dummy trim for one side of door. Dummy trim for both sides of door. S-Series LT • Complete Locks* Standard Lever Collection*B or C Rose Trim LT-Series (B or C Rose Trim) - Standard Levers Lever Designs Standard Lead time: 03, 06, 07, 12, 17, OME 6: 01, 02, 05, 18, LAT, LON, ACC†, AST†, MER† † Not available 629, 630 Function Description Finishes 605 606 609 619 622 625 626 629 630 643e Keyless Functions $293.00 LT10 Passage LT10F Passage, Firerated 303.00 LT40 Privacy 309.00 LT40F Privacy, Firerated 317.00 LT170 Single Dummy 139.00 LT172 Pair Dummy 281.00 Price Book 8 260 Effective April 4, 2020 • Rev. 04/20 Complete Locks • LT Standard Lever Collection*B or C Rose Trim Cast or Forged Lever Designs with Wrought Roses 01 02 2¹⁄₁₆" 03 1¹³⁄₁₆" 4³⁄₄" 4³⁄₄" 06 07 17 2" 1³¹⁄₃₂" LON 2" 2¹⁄₃₂" ³⁄₈" 4⁷⁄₈" 4³⁄₄" 2³⁄₁₀" 2¹¹⁄₁₆" 2" Merano (MER) 2" 2" 4" 4" 4¹⁄₈" 2" 3¹⁄₈" S-Series Asti (AST) 5¹⁄₁₆" 3⁵⁄₁₆" 2⁹⁄₁₆" 2⁹⁄₁₆" Accent (ACC) OME ¹⁄₂" 4⁷⁄₈" LT-5 LAT 4³⁄₄" 3" 3¹⁄₁₆" 2⁷⁄₈" Not available with C Rose ¹⁄₂" 4⁵⁄₈" 4⁵⁄₈" 4⁵⁄₈" 18 2⁷⁄₈" 12 ¹⁄₂" 2¹⁄₂" 3³⁄₄" 2¹³⁄₁₆" 2¹³⁄₁₆" 2¹¹⁄₁₆" 2⁹⁄₃₂" TUBULAR 3⁷⁄₈" 05 ¹⁄₂" Dia. ¹¹⁄₁₆" 3¹⁄₈" 2⁵⁄₈" 2" 2" 4" 4" 4¹⁄₈" 2⁹⁄₁₆" Wrought Rose Designs 2⁹⁄₁₆" 2⁹⁄₁₆" 2⁵⁄₈" 3¹⁄₈" 3¹⁄₈" B Note: Above images shown with B Rose. Design of LT lock allows the inside and outside levers to be interchanged; as a result, it is not necessary to specify handing. C 2 9/16" (65mm) diameter 2 5/8" (66mm) diameter Price Book 8 Effective April 4, 2020 • Rev. 04/20 261 LT • Complete Locks M Lever Collection*B or C Rose Trim LT-Series (B or C Rose Trim) - M Collection Levers Lever Designs Standard Lead time: M51, M52, M81 Function Description Finishes 605 606 609 619 622 625 626 629 630 643e Keyless Functions $293.00 LT10 Passage LT10F Passage, Firerated 303.00 LT40 Privacy 309.00 LT40F Privacy, Firerated 317.00 LT170 Single Dummy 139.00 LT172 Pair Dummy 281.00 S-Series LT-6 TUBULAR 6: ME1, ME2, ME3, M53, M54, M55, M56, M57†, M61, M62†, M63, M82, M83, M84, M85 † Available 629 and 630 only Price Book 8 262 Effective April 4, 2020 • Rev. 04/20 LT • Complete Locks M Lever Collection* B or C Rose Trim Cast or Forged Lever Designs with Wrought Roses M51 M52 M53 2.2" 2.4" 2.6” 4.5" 4.35” 3" 3.2" M54 3.2” 2.2" 2.4" 2.14” M56 2.14” 4.35” 2.1” 3" 3.2" 2.3” 2.6” 4.5" M55 4.5" 3.2” 4.3” 4.35” 4.6” 2.4” 3” 2.75” 3” 2.14” 2.14” M57 2.1” 4.3” M61 2.3” M62 4.35” 1.9” 3” 3.2” 2.9” Ispecify hand 2.15” 2.1” 2.7” 1.9” Ispecify hand 4.5” M81 4.5” M82 4.5” 0.4” 0.4” 2.1” 3.2” 2.7” 2.1” 4.8” 2.2” 4.8” S-Series 2.9” 4.5” 3” 4.5” 4.5” LT-7 2.75” M63 4.6” 2.4” 2.1” 2.15” 4.5” TUBULAR 4.5" 2.1” 2.9” Ispecify hand 3.2” M83 M84 3.2” 0.4” 0.4” 2.9” 0.4” 4.5” 2.1” 4.8” 0.4” 4.8” 2.2” M85 0.3” 2.9” 4.6” 2.9” 5.1” 0.4” 2.9” 4.6” ME2 0.4” 4.9” 5.1” 3.3” 3” 5.1” 5.2” 5.5” 2.125” 2.125” 2.125” Ispecify hand 0.4” 2.9” 0.4” 3.2” 2.8” 0.4” 5.5” 0.4” 5.1” 5.2” Wrought Rose Designs 2.125” B 3.3” ME3 0.4” 3.0” 0.3” 0.4” 3” ME1 4.9” 2.125” 3.0” Note: Above images shown with B 2.8” Rose. Design of LT lock allows the inside and outside levers to be interchanged; as a result, it is not necessary to specify handing except with single dummy function. C 2.125” 3.2” Price Book 8 Effective April 4, 2020 • Rev. 04/20 263 Latches, Strikes, Non Standard Door Thickness Antimicrobial Coating LT • Options Latches Specify Description List Price Adjustment TUBULAR Non-Firerated Latches THP-8301 Passage Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors. THP-8201 Passage Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors. THP-8319 Privacy Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors. THP-8219 Privacy Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors. N/C Firerated Latches THP-8301-F Passage Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors. THP-8201-F Passage Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors. THP-8319-F Privacy Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors. THP-8219-F Privacy Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors. N/C LT-8 Strikes Specify Description 10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) List Price Adjustment 10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" K510-066 Box for 10-025 ANSI strike 10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length 10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length C603-623 Box for 10-001 T-Strike N/C $8.80 N/C 31.70 N/C S-Series Ordering instructions: specify desired strike on order only if requesting different from standard Non Standard Door Thickness Description Specify Door thickness Extension kit for doors > 1 3/4" up to 2" thick, extended equally List Price Adjustment 11.80 Ordering instructions: Include thickness dimension in order. EX: LT40 06B 626 2" (LT40 function, 06B trim, 626, 2" door thickness) Antimicrobial Coating Specify Description 626AM or 630AM Adds silver-ion based antimicrobial coating to inside and outside lever, bushing, rose, and privacy pin (if applicable) List Price Adjustment Ordering instructions: Specify finish as either 626AM or 630AM Price Book 8 264 Effective April 4, 2020 • Rev. 04/20 $57.60 Parts • LT Levers, Knobs, Roses and Latches & Strikes Levers Levers & Knobs Style Standard 605 Lever & Knob Design 016, 026, 03, 056, 06, 07, 12I, 17, 18, OME6 LAT6, LON6 ACCI, ASTI, MERI M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826, M836, M846, M856I, ME16I, ME26I, ME36 622 625 626 629 630 643e • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • M576I, M626I 6Extended Factory Lead Time Ispecify handing Description Part Number 09-502 Lever with bushing only Ordering instructions: Specify part number, lever style, finish. Ex: 09-502 03 626 606 609 Standard Levers $186 TUBULAR Decorative 619 • • • Decorative Levers $201 Roses Roses 605 Available Finishes • 606 609 • • 619 622 625 626 629 630 643e • • • • • • • Price Each LT-9 Part Number Description 09-403 xx Passage Rose; specify (xx) as either B or C Rose design 09-486 Privacy Rose, ‘B’ design 09-459 Privacy Rose, ‘C’ design Ordering instructions: Specify part number + finish. Ex: 09-403 B 626 $105.00 Latches & Strikes 605 Part Number Springlatches THP-8301-CH THP-8301-F-CH THP-8201-CH THP-8201-F-CH THP-8319-CH THP-8319-F-CH THP-8219-CH THP-8219-F-CH • Description 606 609 • • 619 622 625 626 629 630 643e • • • • • • • Price Each Passage Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate. Typical for > 1 3/4" doors. Includes screws. Passage Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate. Typical for > 1 3/4" doors. Includes screws. UL-20 minute firerated. Passage Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate. Typical for 1 3/8" doors. Includes screws. Passage Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate. Typical for 1 3/8" doors. Includes screws. UL 20 minute firerated. Privacy Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate. Typical for > 1 3/4" doors. Includes screws. Privacy Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate. Typical for > 1 3/4" doors. Includes screws. UL 20 minute firerated. Privacy Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate. Typical for 1 3/8" doors. Includes screws. Privacy Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate. Typical for 1 3/8" doors. Includes screws. UL 20 minute firerated. 67.00 70.80 67.00 73.30 67.00 73.30 67.00 73.30 Strikes Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 10-001 xx 1/4", 1 1/2", 1 3/4", 2" 10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" K510-066 Box for ANSI strike (finish not applicable) 10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length 10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length C603-623 Box for 10-001 T-Strike Ordering Instructions: Specify part number and finish. if applicable. 10-001 $6.50 15.20 11.40 15.70 45.00 7.00 7.60 0.70 Price Book 8 Effective April 4, 2020 • Rev. 04/20 265 S-Series Available Finishes LT • Parts Miscellaneous Parts Miscellaneous Parts 605 • 606 609 • • 619 • 622 625 626 629 630 643e • • • • • • Part Number Description Price Each THP-022 Privacy Pin THP-021 Privacy Pin Stand off (for > 1 3/4" to 2" thick doors) (finish not applicable) 6.70 THP-S88806-IR Spindle Assembly (finish not applicable) 21.30 $21.40 L583-685 Latch Alignment Collar (finish not applicable) 20.70 L283-031 Inside Mounting Plate 40.20 L283-340 Outside Mounting Plate Assembly, 1 3/8" - 1 3/4" thick doors (finish not applicable) 40.20 L283-378 Outside Mounting Plate Assembly, > 1 3/4" - 2" thick doors (finish not applicable) 46.90 L283-341 LT Springcage (finish not applicable) 24.10 L583-682 Door Plate (finish not applicable) 16.20 32.20 L583-684 Dummy Springcage for LT0170 & LT0172 functions (finish not applicable) L583-708 Wrench, pin (emergency pin for privacy function) (finish not applicable) 2.80 B202-517 Strike and Latch Screws (4 screw total) 8.60 L583-584 Mounting Plate screws (requires 2 per lock) 3.90 F506-455 Screw, Combination wood/metal 0.72 Ordering Instructions: Specify part number and finish. if applicable S-Series LT-10 TUBULAR Available Finishes Price Book 8 266 Effective April 4, 2020 • Rev. 04/20 S Levers GRADE 2 TUBULAR LEVERED LOCK S-Series Exploded View - S51PD TUBULAR Inside chassis and lever Inside rose Mounting screws Outside chassis and rose LT-Series Universal deadlatch 1/2" Throw S-1 Outside lever Box 6-Pin cylinder Strike Door Preparation Price Book 8 Effective April 4, 2020 • Rev. 04/20 267 S Levers Ordering Procedures Outside Line Item Qty 1 10 Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Dim: Additional Details: S-2 LT-Series TUBULAR To order Schlage products, descriptive data should be in the same sequence as shown below. Inside Product DES FIN DES FIN Hand Latch Strike S51PD FLA 626 FLA 613 RH 16-204 10-025 Dr Thk Ext Additional Details 1316 KA Line item number Quantity Product function + cylinder code Outside lever design Outside finish Inside lever design, specify only if different from the outside lever design Inside lever finish, specify only if different from the outside finish Hand of door, specify only for Flair (FLA) lever design Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike Door thickness, leave blank (S lock only has standard compatibility with 1 3/8" -2" doors except for S40D, 1 3/8" - 1 7/8") Extension, leave blank for S lock Dimension, enter only for non-standard strike lip length Enter additional detail for keying information or special requirements Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 268 DIM Effective April 4, 2020 • Rev. 04/20 Introduction S Product Identification Table of Contents S 51 P D Latch Suffix TUBULAR D = Deadlatch Cylinder Suffix P P6 L R J M T = = = = = = = Conventional, 6 Pin/Keyed 5 Conventional, 6 pin Less Conventional, 6 Pin FSIC Less FSIC SL - FSIC FSIC - Construction Core Z = SL Conventional Cylinder, 7 pin Function Lock Series LT-Series Functions S-4 S-5 Complete Locks Options S-7 S-7 DeadLatches Strikes S-7 Locks Less Components S-7 Tactile Warning and Tamper Resistant S-7 Torx® Screws Parts S-8 S-8 Levers, Roses, and Chassis Parts Latches & Strikes S-8 S-9 Adapters Screws S-9 S-9 Standard Screw Packs Torx Screw Packs S-9 S-9 Special Parts Cylinders S-10 See Cylinders Section Complete Cylinders How To Order Forms & Examples Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Oil Rubbed Bronze Satin Nickel Bright Chromium Plated Satin Chromium Plated S-3 Code 605 (US 3) 606 (US 4) 609 (US 5) 613 (US 10B) 619 (US 15) 625 (US 26) 626 (US 26D) Standard Features Certification Latch Strike Backset Cylinder Door Range Keys ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. 1" x 2 1/4", Square corner faceplate, 7/8"housing diameter, 1/2" throw 1 1/8"x 2 3/4", Square corner, T-strike, box Dual backset latch, fits either 2 3/8" or 2 3/4" backsets 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) 1 3/8" – 2" (except S40D: 1 3/8" – 1 7/8") Two nickel silver cut keys per lock, 6-pin, S123 section Price Book 8 Effective April 4, 2020 • Rev. 04/20 269 S • Functions Non-Keyed Locks Keyed Locks SCHLAGE ANSI SCHLAGE ANSI S10D F75 Passage Latch S51PD F81 Entrance Lock S40D F76 Bath/Bedroom Privacy Lock S70PD F84 Classroom Lock Single Dummy Trim S80PD F86 Storeroom Lock LT-Series TUBULAR ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door. S-4 S170 Both levers always unlocked. Push-button locking. Can be unlocked from outside with small circular tool. Turning inside lever releases button. Closing the door does not release button. Dummy trim for one side of door. Used for door pull or as matching inactive trim. Price Book 8 270 Effective April 4, 2020 • Rev. 04/20 Outside lever locked and unlocked by key or by thumbturn inside. Inside lever always unlocked for immediate egress. Turning inside lever does not unlock outside lever. Outside lever locked and unlocked by key. Inside lever always unlocked for immediate egress. Outside lever fixed when locked. Latch retracted by outside lever after key is inserted and turned 90°. Inside lever always unlocked for immediate egress. Complete Locks • S Saturn (SAT) Neptune (NEP) Jupiter (JUP) 0.6” 0.5” 4.2” 1.8” 4” 2.5” 2.5” 2.3” TUBULAR 2.5” 2.5” 2.5” 2.5” 1.8” 4.5” 4.5” 2.5” Flair (FLA) ISpecify hand Commercial Lever Suite S Lock (tubular) Saturn Neptune Jupiter Flair L Lock (mortise) 06 17 07 Asti ND Lock (cylindrical) Rhodes Sparta Athens AL Lock (cylindrical) Saturn Neptune Jupiter Von Duprin (Exit Devices) 06 17 07 Asti LT-Series Tactile Options Tactile Warning (knurling) Saturn Lever Only S-5 Latches Standard, Square Corner, 16-203 Option, Round Corner, 16-204 Strikes Standard, T-Strike, 10-001 Option, ANSI Strike, 10-025 Option, Full Lip Strike, 10-027 Price Book 8 Effective April 4, 2020 • Rev. 04/20 271 S • Complete Locks Designs and Finishes SAT NEP JUP FLAI TUBULAR 626 Function Description PRIMARY CYLINDER ADJUSTMENTS LD = Less conventional, 6 Pin JD = Less FSIC 605 606 619 625 6609 613 RD = FSIC TD* = FSIC - Construction Core Keyless S10D Passage $212 $224 $242 S40D Privacy 262 274 292 S170 Single Dummy 99 105 115 SAT NEP JUP FLAI Keyed, Single Cylinder S51PD Entrance S70PD Classroom S80PD Storeroom $270 $282 $300 SAT NEP JUP LD JD -65 -36 RD TD* 39 Notes For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. SL Cylinder with Everest B or Everest R keyways add $18.00. LT-Series * Full size construction core locks are assessed a one-time non-refundable handing charge (50-231) per core Ordering instructions: To change cylinder type from default 6-pn standard, change lock suffix as appropriate. Ex: S51JD for S51 function less full size core. Primus / Primus XP - available through specific channels based on security levels. See Terms & Conditions for details. Specify Description Price Each S-6 Primus Cylinders LD Suffix Order lock less cylinder; order Primus cylinder 20-752 separately 20-752 Primus Cylinder -$64 (deduct from lock price) 141 Full-Size Interchangeable Primus Core JD Suffix Order lock less full size core; order Primus core 20-740 separately 20-740 Full-size interchangable Primus core 157 Ordering instructions: Add suffix to lock function, order Primus cylinder separately. Price Book 8 272 -$36 (deduct from lock price) Effective April 4, 2020 • Rev. 04/20 DeadLatches, Strikes, Locks Less Components, Tactile Warning and Tamper Resistant Torx® Screws Options • S DeadLatches Description Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" square corner (standard latch) (includes A501-878 latch adapter for 1 1/8" prep & G506-815 sleeve for 1" housing) List Price Adjustment 16-204 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" round corner (1/4" radius) 16-132 5" backset, 1" x 2 1/4" square corner (includes A501-897 latch adapter for 1 1/8" prep & G506-815 sleeve for 1" housing) N/C TUBULAR Specify 16-203 $10.20 Ordering instructions: specify desired latch on order only if requesting different from standard. Strikes Description 10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) List Price Adjustment 10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" K510-066 Box for ANSI strike 10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length 10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length N/C $7.50 N/C 28.80 N/C LT-Series Specify Ordering instructions: specify desired strike on order only if requesting different from standard. Locks Less Components Description Specify Less standard cylinder LD cylinder suffix Example: S51LD Sat 626 List Price Adjustment Less deadlatch LLL for latch Example: S51PD Sat 626 LLL 10-001 -21.70 Less strike LLL for strike Example: S51PD Sat 626 16-203 LLL -4.80 -$65.00 S-7 Ordering instructions: specify on order only if requesting different from standard. Tactile Warning and Tamper Resistant Torx® Screws Specify Description '8' lever prefix Tactile warning applied to outside lever; specify lever design with '8' prefix. Example: 8SA for Saturn. Not available on other levers. List Price Adjustment Torx screws Tamper-resistant Torx screws; specify under "additional details" $47.80 21.90 Price Book 8 Effective April 4, 2020 • Rev. 04/20 273 S • Parts Levers, Roses, and Chassis Parts, Latches & Strikes Levers, Roses, and Chassis Parts Available Finishes TUBULAR Part Number 605 606 609 613 625 626 • • •6 • • • Description Price Each Inside Chassis & Lever Assembly, Inside Rose 68-011 xxx Inside chassis & lever assembly for S10, S70, S80 function. Specify (xxx) as SAT NEP JUP FLAI lever design 68-012 xxx Inside chassis & lever assembly for the S40 function. Specify (xxx) as SAT NEP JUP FLAI lever design 68-013 xxx Inside chassis & lever assembly for the S51 function. Specify (xxx) as SAT NEP JUP FLAI lever design 08-021 Rose for inside chassis & lever assembly $116.00 128.00 28.30 Outside Chassis, Rose and Lever (NON-KEYED) 68-001 xxx Outside chassis, rose & lever assembly for the S10 function. Specify (xxx) as SAT NEP JUP FLAI lever design $114.00 68-002 xxx Outside chassis, rose & lever assembly for the S40 function Specify (xxx) as SAT NEP JUP FLAI lever design 114.00 LT-Series Outside Chassis & Rose (KEYED) 68-003 Outside chassis and rose assembly for S51 and S70 function. Requires outside lever (see section below) 68-004 Outside chassis and rose assembly for S80 function. Requires outside lever (see section below) $77.90 Outside Keyed Lever, Standard Cylinder 08-020 xxx Outside lever for use with standard cylinder. specify (xxx) as SAT NEP JUP FLAI $80.70 S-8 Outside Keyed Lever, Interchangeable Core, and Related Parts 08-027 xxx Full size core lever, specify (xxx) as SAT NEP JUP only $81.10 08-030 xxx Full size core lever, driver, retainer (converts PD to JD). Specify (xxx) as SAT NEP JUP only 97.90 S605-241 Full size core retainer 4.50 S605-242 Full size core driver 9.90 S605-194 Lever insert for FSIC 4.20 Ordering Instructions: Specify part number and finish. Latches & Strikes Available Finishes Part Number Description 605 606 • • 609 613 625 626 •6 • • • Price Each Deadlatches 16-203 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" square corner (standard latch) (includes A501-878 latch adapter for 1 1/8" prep & G506-815 sleeve for 1" housing) 16-204 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" round corner (1/4" radius) 16-132 5" backset, 1" x 2 1/4" square corner (includes A501-897 latch adapter for 1 1/8" prep & G506-815 sleeve for 1" housing) 50.00 39-030 Rabbeted latch and strike kit, 605 and 626 finish only (adapts square corner & 2 3/4" high square corner strikes to 1/2" rabbeted door and frame preps) 60.00 10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) $6.70 10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 7.80 10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 11.90 10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 15.70 10-025 138 ANSI, no box, 1 1/4" x 4 7/8", 1 3/8" lip length 45.00 K510-066 Box for ANSI strike 10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length 10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length $38.50 Strikes 7.00 Ordering Instructions: Specify part number and finish. Price Book 8 274 Effective April 4, 2020 • Rev. 04/20 7.80 Adapters, Screws, Standard Screw Packs, Torx® Screw Packs, Special Parts 38-018 Parts • S A501-878 G506-815 Available Finishes 605 606 • • Part Number Description 38-018 Thin door extension ring (2 required per lock) Latch front adapter (use with 1" faceplate in 1 1/8" door prep). Order in multiples of 100. Finish not A501-878 applicable. G506-815 1" long latch housing sleeve to adapt 7/8" diameter housing to 1" bore. Finish not applicable. Ordering Instructions: Specify part number and finish if applicable. 609 613 625 626 •6 • • • TUBULAR Adapters Price Each $13.60 0.80 7.20 Screws 605 606 609 613 625 626 • • •6 • • • Part Number Description Individual Screws ANSI Strike screws, PFH combo, 12-24 x 1" C603-897 Latch or standard strike screws, PFH combo, 8-32 x 3/4" F506-278 Mounting screws, RPH Machine, 8-32 x 1 1/2" (finish not applicable) F506-237 Mounting screws, wood, #8 x 3/4" (finish not applicable) $1.00 (order multiples of 100) 0.94 (order multiples of 100) 1.20 (order multiples of 100) 0.82 (order multiples of 100) S-9 C603-256 Price Each PFH = Phillips Flat Head RPH = Round Phillips Head Screw Packs Part Number S306-180 S306-182 S306-183 Torx Screw Packs C203-311 Description Mounting Screws, S170 (finish not applicable) Mounting Screws, latch & strike Price Each Contains: (2) S506-960 Contains: ( 2) F506-278 (1) M504-271 Mounting screws, latch & ANSI Strike Contains: (2) F506-278 (2) C603-897 5.20 (4) C603-897 12.10 (4) C603-256 (1) M504-271 12.10 Latch and standard strike Latch and ANSI strike Contains: (4) C503-766 (T-15) Contains: (2) C503-766 (T-15) C203-312 (2) L583-371 (T-20) Notes Torx screw packs are furnished with the appropriate T-xx installation tool(s) Ordering Instructions: Specify part number and finish if applicable. Special Parts 21.90 6Extended Lead Time Available Finishes Part Number XQ07-351 Description 10-025 strike, 7/8" flat lip 10-025 strike, lips through 6" (except 7/8", 11 3/16", 1 3/8" and 1 1/2"). XQ07-351 xxx Specify (xxx) lip length in part number Ordering Instructions: Specify part number and finish. 605 606 609 613 625 626 • • •6 • • • Price Each $44.00 212.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 LT-Series Available Finishes 275 S • Parts Cylinder Reference Price Each TUBULAR Cylinder Mechanism Design Complete Cylinder Standard 21-059 Everest SL (R/B Keyways only) 91-007 Primus ® Primus XP Keyed Levers Restricted $65.00 $83.00 83.00 20-752 145.00 20-752-XP 145.00 145.00 91-722-XP Primus UL437 20-552 179.00 Primus UL437-XP 20-552-XP 179.00 S-10 LT-Series Everest SL Primus XP (R/B Keyways only) Price Book 8 276 Open Effective April 4, 2020 • Rev. 04/20 HL6/PL7/PL8 Series HOSPITAL LATCH, TUBULAR AND MORTISE SPECIALTY Push/Pull Cover Cover Screws Mounting Screws Strike Strike Box HL-1 Strike Screws Latch Screws Latch Push Assembly Pull Assembly Mounting Nuts Lead Washers (optional) Push/Pull Cover Lead Latch Cover (optional) (Tubular model shown) Price Book 8 Effective April 4, 2020 • Rev. 04/20 277 Hospital Latch Ordering Procedures HL-2 SPECIALTY To order Schlage Hospital Latch product, descriptive data should be in the same sequence as shown below Line Item Qty Function-Backset Finish Option Engraving Strike Tubular (bored) 1 10 HL6-5 626 B E6 A Mortise 1 10 HL6-9070 626 B E6 BT Line Item Line item number Qty Quantity Function - Backset Tubular Model: HL6 (passage), PL7 (privacy, thumbturn on push side), PL8 (privacy, thumbturn on pull side) Tubular Backset: -2 (2 3/4" backset), -3 (3 3/4" backset), -5 (5" backset), -7 (7"backset) Mortise Model: Choose from list page HL-4 Mortise Backset: leave blank (backset always 2 3/4") Finish 605 (US3, Bright Brass); 606 (US4, Satin Brass), 612 (US10, Satin Bronze), 613 (US10B, Oil Rubbed Bronze) 625 (US26, Bright Chrome), 626 (US26D, Satin Chrome), 626AM (Satin Chrome anti-microbial), 629 (US32, Bright Stainless Steel), 630 (US32D, Satin Stainless Steel) Option B (brass lever material for 626 finish); EN (pull-side paddle only); EO (push-side paddle only); L (lead lined); SOC (pin-in-socket security screws) Engraving style If applicable - E1, E2, E3, E4, E5, E6, see page HL-8 for details Strike Tubular: leave blank for standard strike, A for ASA strike, AS for both standard and ASA strike Mortise: leave blank for standard strike, specify BT for bent-tab strike Price Book 8 278 Effective April 4, 2020 • Rev. 04/20 Introduction HL Table of Contents HL-4 HL-6 HL-6 HL-7 HL-8 SPECIALTY Functions Hospital latch HL6/PL7/PL8 Tubular (bored) Hospital Latch HL6 Mortise Hospital Latch Push/Pull Latches Engraving Guide Parts HL-9 Standard Features HL-3 Certifications Tubular (bored): UL Listed for 3-hour fire door, 4.0' x 8.0' Mortise: UL listed for 3-hour fire door, 4.0' x 10.0' Latchbolt Tubular (bored): 1/2" throw stainless steel Mortise: 3/4" throw stainless steel Backset Tubular (bored): specify as 2-3/4", 3-3/4", 5", 7" Mortise: 2 3/4" only Door Range 1-3/4" only Finish Codes and Descriptions Code 605 (US 3) 606 (US 4) 612 (US 10) 613 (US 10B) 625 (US 26) 626 (US 26D) 626AM 629 (US 32) 630 (US 32D 630AM Description Bright Brass Satin Brass Satin Bronze Oil Rubbed Bronze Bright Chromium Plated Satin Chromium Plated Antimicrobial Coating on Satin Chromium Bright Stainless Steel Satin Stainless Steel Antimicrobial Coating on Satin Stainless Steel Price Book 8 Effective April 4, 2020 • Rev. 04/20 279 SPECIALTY Tubular (Bored) • Lock Functions HL6 Passage Latchbolt retracted by paddle from either side Inside paddle always free for immediate egress PL7 Privacy, push-side thumbturn Latchbolt retracted by paddle from either side unless outside locked by inside thumbturn or outside cointurn. Actuating inside padde, rotating inside thumbturn or outside cointurn unlocks door. Inside paddle always free for immediate egress. PL8 Privacy, pull-side thumbturn Latchbolt retracted by paddle from either side unless outside locked by inside thumbturn or outside cointurn. Actuating inside padde, rotating inside thumbturn or outside cointurn unlocks door. Inside paddle always free for immediate egress. HL-4 Mortise • Lock Functions HL6-9010 F01 Passage Latch Latchbolt retracted by paddle from either side at all times. Inside paddle is always free for immediate egress. HL6-9070 F05 Classroom Lock Latchbolt retracted by paddle from either side unless outside is locked by key. Unlocked from outside by key. Inside paddle always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is locked. Inside paddle is always free for immediate egress. HL6-9040 F22 Bath/Bedroom Privacy Lock HL6-9080 F07 Storeroom Lock Latchbolt retracted by key outside or by paddle inside. Outside paddle always inoperative. Auxiliary latch deadlocks latchbolt when door is locked. Inside paddle is always free for immediate egress. HL6-9050 F04 Entrance/Office Lock HL6-9082 F30 Institution Lock* Latchbolt retracted by key from either side. Paddle on both sides always inoperative. Auxiliary latch deadlocks latchbolt when door is locked. HL6-9060 F09 Apartment Entrance Lock Latchbolt retracted by paddle from either side unless outside is locked by key from inside. When locked, latchbolt retracted by key outside or paddle inside. Auxiliary latch deadlocks latchbolt when door is locked. Inside paddle is always free for immediate egress. HL6-9092EL HL6-9092EU Latchbolt retracted by paddle from either side unless outside is locked by inside thumbturn. Actuating inside paddle or closing door unlocks outside paddle. To unlock from outside, remove emergency button, insert emergency thumbturn(furnished) in access hole and rotate. Inside paddle is always free for immediate egress. Latchbolt retracted by paddle from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by paddle inside. Outside paddle remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is locked. Inside paddle is always free for immediate egress. Price Book 8 280 Effective April 4, 2020 • Rev. 04/20 Electrically locking/unlocking outside lever, Outside cylinder (replaces HL6-9080EL/EU) Outside paddle continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key outside or paddle inside. Aux latch deadlocks latchbolt when door is locked. Inside lever always free for immediate egress. Mortise • Lock Functions HL6-9095EL HL6-9095EU HL6-9466 F14 Store/Utility Room Lock* Latchbolt retracted by paddle from either side. Deadbolt thrown or retracted by key from either side. SPECIALTY Electrically locking/unlocking both levers, Inside and outside cylinder (replaces HL6-9082EL/EU) Inside and outside paddle continuously locked (EL) or unlocked (EU) by 12 or 24V DC. Latchbolt retracted by key inside or outside. Aux latch deadlocks latchbolt when door is locked. HL6-9473 F21 Dormitory/Bedroom Lock Latchbolt retracted by paddle from either side. Deadbolt thrown or retracted by key outside or thumbturn inside. HL6-9456 Corridor Lock Latchbolt retracted by paddle from either side. Deadbolt actuation by key or thumbturn ratation. Throwing deadbolt locks outside paddle. Actuating inside paddle retracts both deadbolt and latchbolt and unlocks outside paddle. Inside paddle always free for immediate egress. HL6-9485 Faculty/Hotel/Restroom Lock Latchbolt retracted by outside key or inside paddle. Outside paddle always fixed. Deadbolt actuation by thumbturn. When deadbolt is thrown, all keys become inoperative except emergency key. Inside paddle retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever always free for immediate egress. HL6-9465 Closet/Storeroom Lock Latchbolt retracted by paddle from either side. Deadbolt thrown or retracted by key outside. HL6-9486 L/LV9485 with 09-611 indicator Adds 09-611 “Do Not Disturb” indicator to L/ LV9485. Specify L583-375 for “Occupied”. NOTE: This is the “old style” indicator, not the 180 degree indicator. OCCUPIED * In a double door application where the dummy will be used as the strike, order 10-091 Armored Front Strike separately. Price Book 8 Effective April 4, 2020 • Rev. 04/20 281 HL-5 HL6-9453 F20 Entrance/Office Lock with Deadbolt Latchbolt retracted by paddle from either side unless outside is locked by 20° rotation of thumbturn. Deadbolt thrown or retracted by 90° rotation of thumbturn. When locked, key outside or paddle inside retracts deadbolt and latchbolt simultaneously. Outside paddle remains locked until thumbturn is restored to vertical position. Throwing deadbolt automatically locks outside paddle. Auxiliary latch deadlocks latchbolt when door is locked. Inside paddle is always free for immediate egress. HL6/PL7/PL8 • Tubular (bored) hospital latch HL6 Push/Pull Latch and PL7 and PL8 Privacy Function Push/Pull Latch HL-6 SPECIALTY Note: see page HL-3 for ANSI finish conversion to US nomenclature (e.g., 626= US26D/Satin Chrome) 626 finish defaults to zinc paddles unless specified with ‘B’ (Brass) option. All other finishes use brass or stainless steel paddles. Item* Description HL6-2 HL6-3 HL6-5 HL6-7 PL7-2 PL7-3 PL7-5 PL8-2 PL8-3 PL8-5 PL7-7 PL8-7 Push/Pull Latch - 2-3/4˝ Backset Push/Pull Latch - 3-3/4˝ Backset Push/Pull Latch - 5˝ Backset Push/Pull Latch - 7" Backset Push Side Thumbturn - 2-3/4˝ Backset Push Side Thumbturn - 3-3/4˝ Backset Push Side Thumbturn - 5˝ Backset Pull Side Thumbturn - 2-3/4˝ Backset Pull Side Thumbturn - 3-3/4˝ Backset Pull Side Thumbturn - 5˝ Backset Push Side Thumbturn - 7" Backset Pull Side Thumbturn - 7" Backset 626 630 625 629 606 612 605 613 $357** 357 357** 410 465 465 465 465 465 465 518 518 $407 407 407 460 526 526 526 526 526 526 579 579 $434 434 434 487 548 548 548 548 548 548 601 601 $430 430 430 483 558 558 558 558 558 558 611 611 $417 417 417 470 540 540 540 540 540 540 593 593 $443 443 443 496 560 560 560 560 560 560 613 613 **Note: HL6-2 US26D, HL6-2-A US26D, HL6-5 US26D, and HL6-5-A US26D available in Fast Track and ProXpress Options and Engraving List Adjustment Item Description A AS B E1-E6 EN EO L SOC ASA Strike, ANSI 115.1 (1-1/4" x 4-7/8"), when ordered with latch Both Standard & ASA Strikes Brass base material on US26D Engraved Push and Pull. (See page HL-8 for ordering guide) Pull Only Latch Push Only Latch Lead Lining Pin-in-Socket Security Screws N/C 31.20 57.90 57.90 -70.20 -70.20 107.00 31.20 Anti-Microbial Coating Available on 626 (US26D/Satin Chrome) and 630 (US32D/Satin Stainless Steel) finishes only; specify finish as 626AM or 630AM specify finish as 626AM or 630AM Price Book 8 282 Effective April 4, 2020 • Rev. 04/20 $31.20 HL6 • Mortise Hospital Latch Push/Pull Mortise Lock Combination Description HL6-9010 HL6-9040* HL6-9050* HL6-9060 HL6-9070 HL6-9080 HL6-9082 HL6-9092EL/EU HL6-9095EL/EU HL6-9453* HL6-9456* HL6-9465 HL6-9466 HL6-9473* HL6-9485* HL6-9486* Passage Function Privacy Function Office/Inner Entry Function Apartment Entrance Function Classroom Function Storeroom Function Institution Function Storeroom Function w/ Electric Locking or Unlocking Institution Function w/ Electric Locking or Unlocking Entrance Function Dormitory Exit Function Closet/Storeroom Function Store/Utility Function Dorm Bedroom Function Hotel Lock Function Hotel Lock Function Mortise paddles only / less mortise lock (not compatible with L9095 electrified option) Mortise paddles only / less mortise lock (specific to L9095 electrified option) - Available December 2018 HL6-9000RK HL6-9000RK-95 626 605, 606, 612, 613, 625, 630 $987 1,031 1,031 987 987 987 987 1,685 1,685 1,031 1,031 1,031 1,031 1,031 1,031 1,031 $1,027 1,071 1,071 1,027 1,027 1,027 1,027 1,725 1,725 1,071 1,071 1,071 1,071 1,071 1,071 1,071 424 464 424 464 HL-7 Model* SPECIALTY • Schlage L Series mortise lock Included. • Cylinders must be ordered separate† • See page HL-3 for ANSI finish conversion to US nomenclature (e.g., 626= US26D/Satin Chrome) • 626 finish defaults to zinc paddles unless specified with ‘B’ (Brass) option. All other finishes use brass or stainless steel paddles • On functions with cylinders, handles must be mounted in down position on key side or horizontally on both sides. • On functions with thumbturns, handles must be mounted in the horizontal position • All units 2-3/4˝ backset • ASA strike furnished with all units. Bent-tab strike optional • Standard strike lip length on the default 10-072 strike is 1-3/16”. Optional lip lengths available, specify on order (7/8”, 1”, 1-1/2”, 1-3/4”, 2”). *Thumbturn functions Options List Adjustment Item Description B BT E1-E6 EN EO L RX SOC Brass base material on US26D Bent Tab for Mortise Lock Strike Engraved Push and Pull. (See page HL-8 for ordering guide) Pull Side Only Latch Push Side Only Latch Lead Lining Request to Exit (RX) option for HL6-9092 or HL6-9095 Pin-in-Socket Security Screws $57.90 66.80 57.90 -162.00 -162.00 297.00 181.00 31.20 Anti-Microbial Coating Available on 626 (US26D/Satin Chrome) and 630 (US32/Satin Stainless Steel) finishes only; specify finish as 626AM or 630AM $31.20 Cylinders † NOTE: Cylinders are not included with mortise push-pull latches and must be ordered separate. See Schlage PB4 pages CYL-28 (standard cylinder), CYL-33 (FSIC) and CYL-35 (SFIC) for pricing and ordering information Price Book 8 Effective April 4, 2020 • Rev. 04/20 283 L L L L Push/Pull Latches P U P S U H S H Engraving Guide SPECIALTY PP U U SS H HP P P PUSH U U PUSH U S PUSH S S H H PUSH H PP U U SS H HP P U U S S H H PUSH PUSH PUSH PUSH P U S H P P U P U PS P U U S PH U SS HU S H PUSH H PUSH H S H HL-8 P U P L U LL L P U P S U H S H P U P L U L L L PP U U PULL PULL LL PULL LL P PULL P P U U U L L L L PL PULL L PPULL U PULL U LL LLPULL P P P U U U L L L LP L PL U P U L P U L LL U L L L L P P PULL U PULL U L L L L PUSH PUSH PULL PULL PULL PUSH PUSH PUSH PUSH P U P PUSH S PUSH U H S H P P U U PS S UH H P S U H S H PP U U PUSHS S PUSH PUSHH HP P PUSH PUSH P U U PUSH U S S S PUSH H H PUSH PUSH H PUSH PULL PULL P P U U P L L U P L P UPULL PULL L L U P PULL L LL U L L PL PL U U LL LL P P P U U PULL U PULL L L PULL L L L PULL PULL L PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH P P U U S S H H 284 PUSH PUSH To Order, Specify Push Up, Pull Down • Any backset • Non-handed E1 PASSAGE HL6 Push Up, Pull Up • Any Backset • Non-handed Push Down, Pull Up • Any Backset • Non-Handed PULL PULL P U L L PP U U LL LL P P U P U LU P LU L LL L L L PULL PULL P P U U L L L L PULL MORTISE HL6 E6 PASSAGE HL6 Horizontal Engraving • Any Backset • RH & LHR PRIVACY PL7/PL8 Horizontal Engraving • Any Backset • LH & RHR MORTISE HL6 E4 PASSAGE HL6 Horizontal Engraving • 7˝ Backset only • RH or LHR MORTISE HL6 E4 PASSAGE HL6 Horizontal Engraving • 7˝ Backset only • LH or RHR E3 PASSAGE HL6 Price Book 8 MORTISE HL6 E3 PASSAGE HL6 PULL Effective April 4, 2020 • Rev. 04/20 MORTISE HL6 E5 Push Down, Pull Down • Any Backset • Non-handed PULL PULL PULLPULL PULL PULL PULL PULL PRIVACY PL7/PL8 PASSAGE HL6 PULL PULL PULL PULL MORTISE HL6 E2 PASSAGE HL6 PULL PUSH PUSH PP U U SS H HP P P U U U S S S H H H P P PUSH U PUSH U S S H H Mounting Position Parts Hospital Latch Paddle Assemblies Reference diagram below when ordering engraved push/pull paddles listed below SPECIALTY Engraved Towards Part Number PULL Engraved Down PULL PUSH PUSH PULL PUSH Engraved Up PUSH PULL Engraved Away Description List HANDLE.10155 HANDLE.10179 HANDLE.10156 HANDLE.10180 HANDLE.10157 HANDLE.10181 HANDLE.10158 HANDLE.10182 HANDLE.10159 HANDLE.10183 HANDLE.10160 HANDLE.10184 HANDLE.10215 HANDLE.10275 HANDLE.10161 HANDLE.10185 HANDLE.10162 HANDLE.10186 HANDLE.10225 HANDLE.10308 HANDLE.10248 HANDLE.10306 HANDLE.10168 HANDLE.10176 HANDLE.10192 HANDLE.10200 HANDLE.10170 HANDLE.10178 HANDLE.10194 HANDLE.10202 HANDLE.10604 HANDLE.10606 HL6 Push Handle Assy, 605/US3/Bright Brass Finish HL6 Pull Handle Assy, 605/US3/Bright Brass Finish HL6 Push Handle Assy, 606/US4/Satin Brass Finish HL6 Pull Handle Assy, 606/US4/Satin Brass Finish HL6 Push Handle Assy, 612/US10/Satin Bronze Finish HL6 Pull Handle Assy, 612/US10/Satin Bronze Finish HL6 Push Handle Assy, 613/US10B/Oil Rubbed Bronze Finish HL6 Pull Handle Assy, 613/US10B/Oil Rubbed Bronze Finish HL6 Push Handle Assy, 625/US26/Bright Chrome Finish HL6 Pull Handle Assy, 625/US26/Bright Chrome Finish HL6 Push Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle HL6 Pull Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle HL6 Push Handle Assy, 626/US26D/Satin Chrome Finish HL6 Pull Handle Assy, 626/US26D/Satin Chrome Finish HL6 Push Handle Assy, 629/US32/Bright Stainless Steel HL6 Pull Handle Assy, 629/US32/Bright Stainless Steel HL6 Push Handle Assy, 630/US32D/Satin Stainless Steel HL6 Pull Handle Assy, 630/US32D/Satin Stainless Steel HL6 Push Handle Eo Assy 626/US26D/Satin Chrome Finish, Zinc Paddle HL6 Pull Handle En Assy 626/US26D/Satin Chrome Finish, Zinc Paddle HL6 Push Handle Eo Assy 630/US32D/Satin Stainless Steel HL6 Pull Handle En Assy 630/US32D/Satin Stainless Steel PL7 Push Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle PL8 Push Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle PL7 Pull Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle PL8 Pull Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle PL7 Push Handle Assy, 630/US32D/Stainless Steel PL8 Push Handle Assy, 630/US32D/Stainless Steel PL7 Pull Handle Assy, 630/US32D/Stainless Steel PL8 Pull Handle Assy, 630/US32D/Stainless Steel HL6 Push Handle Assy, 626AM/US26D Satin Chrome Antimicrobial HL6 Pull Handle Assy, 626AM/US26D Satin Chrome Antimicrobial HL-9 Tubular (Bored) Paddle Assemblies - NON ENGRAVED (NOTE: additional finishes available upon request. Lever material either brass or stainless steel unless otherwise noted) $15900 159.00 147.00 147.00 147.00 147.00 159.00 159.00 157.00 157.00 129.00 129.00 142.00 142.00 153.00 153.00 147.00 147.00 129.00 129.00 143.00 143.00 167.00 167.00 167.00 167.00 191.00 191.00 191.00 191.00 142.00 134.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 285 Parts Hospital Latch Paddles (continued) Part Number Description List HL-10 SPECIALTY Tubular (Bored) Paddle Assemblies - ENGRAVED (NOTE: additional finishes and engravings available upon request. Lever material either brass or stainless steel unless otherwise noted) HANDLE.10211 HANDLE.10212 HANDLE.10213 HANDLE.10271 HANDLE.10272 HANDLE.10273 HANDLE.10217 HANDLE.10254 HANDLE.10297 HANDLE.10277 HANDLE.10218 HANDLE.10238 HANDLE.10219 HANDLE.10220 HANDLE.10278 HANDLE.10296 HANDLE.10280 HANDLE.10279 HANDLE.10262 HANDLE.10318 HANDLE.10261 HANDLE.10317 HL6 Push Handle Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddle HL6 Push Handle Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddle HL6 Push Handle Assy Engraved Away, 626/US26D/Satin Chrome, Zinc Paddle HL6 Pull Handle Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddle HL6 Pull Handle Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddle HL6 Pull Handle Assy Engraved Towards, 626/US26D/Satin Chrome, Zinc Paddle HL6 Push Handle Assy Engraved Down, 626/US26D/Satin Chrome, Brass Paddle HL6 Push Handle Assy Engraved Up U,626/US26D/Satin Chrome, Brass Paddle HL6 Pull Handle Assy Engraved Down, 626/US26D/Satin Chrome, Brass Paddle HL6 Pull Handle Assy Engraved Up, 626/US26D/Satin Chrome, Brass Paddle HL6 Push Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel HL6 Push Handle Assy Engraved Up, 630/US32D/Satin Stainless Steel HL6 Push Handle Assy Engraved Away, 630/US32D/Satin Stainless Steel HL6 Push Handle Assy Engraved Toward, 630/US32D/Satin Stainless Steel HL6 Pull Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel HL6 Pull Handle Assy Engraved Up, 630/US32D/Satin Stainless Steel HL6 Pull Handle Assy Engraved Away, 630/US32D/Satin Stainless Steel HL6 Pull Handle Assy Engraved Towards, 630/US32D/Satin Stainless Steel PL7 Push Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel PL7 Pull Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel PL8 Push Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel PL8 Pull Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel $145.00 145.00 145.00 145.00 145.00 145.00 159.00 159.00 159.00 159.00 163.00 163.00 163.00 163.00 163.00 163.00 163.00 163.00 207.00 207.00 207.00 207.00 Mortise Paddle Assemblies - NON ENGRAVED (NOTE: additional finishes available upon request. Lever material either brass or stainless steel unless otherwise noted) HANDLE.10203 HANDLE.10264 HANDLE.10205 HANDLE.10266 HANDLE.10206 HANDLE.10267 HANDLE.10207 HANDLE.10268 HANDLE.10208 HANDLE.10269 HANDLE.10229 HANDLE.10289 HANDLE.10209 HANDLE.10270 HL6 Push Handle Mortise Assy, 605/US3/Bright Brass HL6 Pull Handle Mortise Assy, 605/US3/Bright Brass HL6 Push Handle Mortise Assy, 612/US10/Satin Bronze HL6 Pull Handle Mortise Assy, 612/US10/Satin Bronze HL6 Push Handle Mortise Assy, 613/US10B/Oil Rubbed Bronze HL6 Pull Handle Mortise Assy, 613/US10B/Oil Rubbed Bronze HL6 Push Handle Mortise Assy, 625/US26/Bright Chrome HL6 Pull Handle Mortise Assy, 625/US26/Bright Chrome HL6 Push Handle Mortise Assy, 626/US26D/Satin Chrome, Zinc Paddles HL6 Pull Handle Mortise Assy, 626/US26D/Satin Chrome, Zinc Paddles HL6 Push Handle Mortise Assy, 626/US26D/Satin Chrome HL6 Pull Handle Mortise Assy,626/US26D/Sating Chrome HL6 Push Handle Mortise Assy, 630/US32D/Stainless Steel HL6 Pull Handle Mortise Assy, 630/US32D/Stainless Steel Price Book 8 286 Effective April 4, 2020 • Rev. 04/20 $159.00 159.00 147.00 147.00 159.00 159.00 157.00 157.00 129.00 129.00 142.00 142.00 147.00 147.00 Parts Hospital Latch Paddles (continued) Part Number Description List Mortise Paddle Assemblies - ENGRAVED (NOTE: additional finishes and engravings available upon request. Lever material either brass or stainless steel unless otherwise noted) $145.00 145.00 145.00 145.00 145.00 145.00 159.00 159.00 163.00 163.00 163.00 163.00 163.00 163.00 163.00 163.00 HL-11 HL6 Push Handle Mortise Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddles HL6 Push Handle Mortise Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddles HL6 Push Handle Mortise Assy Engraved Away, 626/US26D/Satin Chrome, Zinc Paddles HL6 Pull Handle Mortise Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddles HL6 Pull Handle Mortise Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddles HL6 Pull Handle Mortise Assy Engraved Towards, 626/US26D/Satin Chrome, Zinc Paddles HL6 Push Handle Mortise Assy Engraved Up, 626/US26D/Satin Chrome HL6 Pull Handle Mortise Assy Engraved Down, 626/US26D/Satin Chrome HL6 Push Handle Mortise Assy Engraved Down, 630/US32D/Stainless Steel HL6 Push Handle Mortise Assy Engraved Up, 630/US32D/Stainless Steel HL6 Push Handle Mortise Assy Engraved Towards, 630/US32D/Stainless Steel HL6 Push Handle Mortise Assy Engraved Away, 630/US32D/Stainless Steel HL6 Pull Handle Mortise Assy Engraved Down, 630/US32D/Stainless Steel HL6 Pull Handle Mortise Assy Engraved Up, 630/US32D/Stainless Steel HL6 Pull Handle Mortise Assy Engraved Towards, 630/US32D/Stainless Steel HL6 Pull Handle Mortise Assy Engraved Away, 630/US32D/Stainless Steel SPECIALTY HANDLE.10236 HANDLE.10230 HANDLE.10226 HANDLE.10290 HANDLE.10298 HANDLE.10286 HANDLE.10325 HANDLE.10326 HANDLE.10221 HANDLE.10243 HANDLE.10222 HANDLE.10231 HANDLE.10285 HANDLE.10281 HANDLE.10291 HANDLE.10282 COVER ASSEMBLIES (NOTE: additional finishes available upon request) 840964-03 840964-04 840964-25 840964-13 840964-25 840967-64 840964-26 840965-31 840965-32 840956-04 840956-25 840956-26 840956-32 840957-04 840957-25 840957-26 840957-32 HL6 Cover, 605/US3/Bright Brass HL6 Cover, 606/US4/Satin Brass HL6 Cover, 612/US10/Satin Bronze HL6 Cover, 613/US10B/Oil Rubbed Bronze HL6 Cover, 625/US26/Bright Chrome HL6 Cover, 626/US26D/Satin Chrome, Zinc HL6 Cover, 626/US26D/Satin Chrome HL6 Cover, 629/US32/Bright Stainless Steel HL6 Cover, 630/US32D/Satin Stainless Steel PL7/PL8 Coin Turn Cover Assy, 605/US4/Bright Brass PL7/PL8 Coin Turn Cover Assy, 625/US26/Bright Chrome PL7/PL8 Coin Turn Cover Assy, 626/US26D/Satin Chrome PL7/PL8 Coin Turn Cover Assy, 630/US32D/Satin Stainless Steel PL7/PL8 Thumbturn Cover Assy, 605/US4/Bright Brass PL7/PL8 Thumbturn Cover Assy, 625/US26/Bright Chrome PL7/PL8 Thumbturn Cover Assy, 626/US26D/Satin Chrome PL7/PL8 Thumbturn Cover Assy, 630/US32D/Satin Stainless Steel $91.30 82.40 82.40 91.30 91.30 72.40 82.40 86.80 82.40 117.00 129.00 118.00 124.00 201.00 208.00 191.00 201.00 STRIKES (NOTE: additional finishes available upon request) HLPART.10040 HLPART.10041 HLPART.10042 HLPART.10043 HLPART.10044 HLPART.10045 HLPART.10051 HLPART.10047 HLPART.10048 HLPART.10049 Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 605/US3/Bright Brass Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 606/US4/Satin Brass Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 612/US10/Satin Bronze Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 613/US10B/Oil Rubbed Bronze Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 625/626/629/630/US26/US26D/US32/US32D Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 605/US3/Bright Brass Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 606/US4/Satin Brass Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 612/US10/Satin Bronze Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 613/US10B/Oil Rubbed Bronze Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 625/626/629/630/US26/US26D/US32/US32D $31.20 31.20 31.20 31.20 31.20 31.20 31.20 31.20 31.20 31.20 Price Book 8 Effective April 4, 2020 • Rev. 04/20 287 Parts Hospital Latch Paddles (continued) Part Number Description List HL-12 SPECIALTY LATCHBOLTS (NOTE: additional finishes available upon request) HLPART.10060 HLPART.10061 HLPART.10062 HLPART.10063 HLPART.10064 HLPART.10065 HLPART.10066 HLPART.10068 HLPART.10067 HLPART.10069 HLPART.10070 HLPART.10071 HLPART.10072 HLPART.10073 HLPART.10074 HLPART.10075 HLPART.10076 HLPART.10077 HLPART.10078 HLPART.10079 HLPART.10080 HLPART.10081 HLPART.10082 HLPART.10083 HL6/PL7PL8 2.75" Latchbolt Pkg 605/US3/Bright Brass HL6/PL7PL8 2.75" Latchbolt Pkg 606/US4/Satin Brass HL6/PL7PL8 2.75" Latchbolt Pkg 612/US10/Satin Bronze HL6/PL7PL8 2.75" Latchbolt Pkg 613/US10B/Oil Rubbed Bronze HL6/PL7PL8 2.75" Latchbolt Pkg 625/629/US26/US32 HL6/PL7PL8 2.75" Latchbolt Pkg 626/630/US26D/US32D HL6/PL7PL8 3.75" Latchbolt Pkg 605/US3/Bright Brass HL6/PL7/PL8 3.75" Latchbolt Pkg 612/US10/Satin Bronze HL6/PL7PL8 3.75" Latchbolt Pkg 626/630/US26D/US32D HL6/PL7/PL8 3.75" Latchbolt Pkg 613/US10B/Oil Rubbed Bronze HL6/PL7/PL8 3.75" Latchbolt Pkg 625/629/US26/US32 HL6/PL7/PL8 3.75" Latchbolt Pkg 626/630/US26D/US32D HL6/PL7PL8 5.0" Latchbolt Pkg 605/US3/Bright Brass HL6/PL7PL8 5.0" Latchbolt Pkg 606/US4/Satin Brass HL6/PL7PL8 5.0" Latchbolt Pkg 612/US10/Satin Bronze HL6/PL7PL8 5.0" Latchbolt Pkg 613/US10B/Oil Rubbed Bronze HL6/PL7PL8 5.0" Latchbolt Pkg 625/629/US26/US32 HL6/PL7PL8 5.0" Latchbolt Pkg 626/630/US26D/US32D HL6/PL7/PL8 7.0" Latchbolt Pkg 605/US3/Bright Brass HL6/PL7/PL8 7.0" Latchbolt Pkg 604/US4/Satin Brass HL6/PL7PL8 7.0" Latchbolt Pkg 612/US10/Satin Bronze HL6/PL7/PL8 7.0" Latchbolt Pkg 613/US10B/Oil Rubbed Bronze HL6/PL7/PL8 7.0" Latchbolt Pkg 625/629/US26/US32 HL6/PL7PL8 7.0" Latchbolt Pkg 626/630/US26D/US32D $55.70 55.70 55.70 55.70 55.70 55.70 57.90 57.90 57.90 57.90 57.90 57.90 59.00 59.00 59.00 59.00 59.00 59.00 116.00 116.00 116.00 116.00 116.00 116.00 HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 2 3/4" Backset HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 3 3/4" Backset HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 5" Backset HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 7" Backset $107.00 107.00 107.00 107.00 LEAD LINING HLPART.10153 HLPART.10154 HLPART.10155 HLPART.10156 SCREW PACKS 800117 800119 800120 800121 800123 800126 800128 840613-00 829632-26 HLPART.10158 HLPART.10159 K110-020 HL6/7/8 Screw Pack, Contains (1) HL6 Tubular bolt pack, (1) B202-516 Screw Pack, (2) K110-020 Screw Packs. Mortise bolt pack, Contains (1) HL6 L9000 bolt pack, (2) (2) K110-020 Screw Packs, (4) #10-32 x 3/8" MS PPH. Does not include mortise brackets. EO Screw pack for back plate 828602, Contains (4) #10-32 x 2-1/8" MS PPH,(1) B202-516 Screw Pack, (2) K110-020 Screw Packs EO Screw pack for back plate 842960, Contains (4) #10-32 x 1-3/4" MS PPH, (4) #10-32 KEPS NUT,(1) B202-516 Screw Pack, (2) K110-020 Screw Pack Von Duprin mortise scew pack, Contains (2) #10-32 x 2-3/4" MS FPH, (4) #10-32 x 2-3/4" MS FPH, (4) #10-32 KEPS NUT, (1) K110-020 Screw Pack, (4) #10-32 x 3/8" MS PPH Cover screw pack, Contains, (1) K110-020 Screw Pack HL6RL Security Screw Pack HL6/PL7/8 Security Screw Pkg 3, 2D HL6eo Screw Pkg 625/626/US26/US26D HL6/HL6M/PL7/PL8 Spring & Rivet Pkg “OLD STYLE” SPRING & RIVET PKG Cover Screws, Contains (2) K510-210, #8-32 x 1/4" MS PFH (Specify finish when ordering) $11.10 11.10 11.10 11.10 11.10 11.10 11.10 11.10 11.10 14.50 14.50 0.94 MORTISE LOCK COMPONENTS 840088-00 Strikes Armor fronts Chassis 36-371-89 HLM6 Mounting Plate $2.80 See page L-35 See page L-35 See page L-39 $1.00 EL/EU SPINDLE (Qty 1) Price Book 8 288 Effective April 4, 2020 • Rev. 04/20 Portable Security KS-Series Padlock Parts Conventional Key-in-Lever Small Format Interchangeable Core Portable Security Lock Body PS-1 Locking Cam Bumper KS-Series Cable Conventional Key-in-Lever Small Format Interchangeable Core Dust cover screws Dust cover Cylinder housing Cylinder Driver Throw member Lock head Washer Driver mounting screw Throw member mounting screw Price Book 8 Effective April 4, 2020 • Rev. 04/20 289 Portable Security All products in this section are stocked and must be ordered in case quantities. Case quantity is listed with each product. All prices listed are unit prices. Note: Keyed different products ship with key in knob cylinders. All cylinders ordered for use with Less Cylinder products will ship separately. PS-2 Portable Security Important Portable Security Ordering Information Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Keyed different products ship with Key in Knob keyed different cylinders only. For other Key in Knob cylinder options order less cylinder padlocks from page PS-5 and cylinders separately. 3. For Custom Engraving, see page PS-8. 4. Key in Knob less cylinder padlocks ship with key stop, cylinder housing, and cylinder housing screw. 5. For cylinder and keying options, refer to Cylinders and Keys & Keying sections. 6. SFIC less cylinder product is shipped without cylinder. 7. Padlocks with cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 290 Effective April 4, 2020 • Rev. 04/20 Introduction Portable Security Table of Contents Portable Security Key-In-Knob with Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-4 Keyed Different. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-4 Chain Only. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-4 Key-In-Knob Less Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-5 SFIC Less Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-6 Full Size IC Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-7 Less Cylinder - Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-7 Custom Engraving Brass Padlocks and Chrome Plated Brass Padlocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-8 Parts and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-9 Specialty Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-10 Flex Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-11 Padlocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-11 Security Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-12 Security Cables and Locking Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-12 PS-3 Standard Features for Commercial Series Padlocks Certification Meets or exceeds ASTM standards for standard steel shackle, shackle cutting and corrosion resistance Lock Body Solid steel, brass and chrome plated brass - Solid steel resists impact, solid brass and chrome plated brass resist corrosion Shackle Hardened alloy steel, double deadbolt locking mechanism Cylinder* Conventional Key-In-Lever, 6-pin solid brass, pinned 5, C keyway, keyed different (KD) unless otherwise specified Cylinder Finish 606 Satin Brass Keys Two nickel silver cut keys per lock, branded Schlage * Cylinders must be ordered as a separate line item for all products except conventional key in lever KD stocked. Standard Features for Commercial Series Cables Lock Head Cable Cylinder* Cylinder Finish Keys Die-cast zinc, 407 satin finish Braided steel vinyl coated for greater cut resistance than twisted cables Conventional Key-In-Lever , 6-pin solid brass, pinned 5, C keyway, keyed different (KD) 606 Satin Brass Two nickel silver cut keys per lock, branded Schlage * Cylinders must be ordered as a separate line item for all products except conventional key in lever KD stocked. Standard Features for Commercial Series Chains Certification Padlock meets or exceeds ASTM standards for tensile force, shock, shackle cutting, cycle test and corrosion Padlock* Recommended for use with KS72F2300 - Round style padlock with 2" shackle Lock Body 2 5/8" Solid steel resists impact Shackle Molybdenum hardened steel, patented interchangeable design, double deadbolt locking mechanism Cylinder Conventional Key-In-Lever , 6-pin solid brass, pinned 5, C keyway, keyed different (KD) Cylinder Finish 606 Satin Brass Keys Two nickel silver cut keys per lock, branded Schlage Chain Triple heat treated Boron Manganese steel; unique six-sided chain links resist attack * Padlocks and chains must be ordered separately. Price Book 8 Effective April 4, 2020 • Rev. 04/20 291 Key-in-Lever with Cylinder • Portable Security 2040 Series Series Available in: Available in: 652 Steel Padlock is 652 Steel Portable Security 606 Brass Round Series Keyed Different - Key-In-Lever 3/4” 3/4” 1 1/2” 1 1/2” KS23D 2“ 2“ 1” 2” 4“ 4“ KS43F KK Series KS72F Shackle Dimension PS-4 Body Size UPC 720018- Part # Width Height Depth Shackle Dimension (metric) A B C A B C Cylinder Case Type Pack Master List Price Pack Each KEYED DIFFERENT - BRASS 997412 KS23D2300 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm KNK 6 24 $62.60 997405 KS23F2300 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNK 6 24 62.80 997290 KS43D2300 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm KNK 6 24 66.60 997283 KS43F2300 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNK 6 24 67.00 1 3/32" 7/16" 2" 7/8" 22mm KNK 6 18 $72.10 KEYED DIFFERENT - STEEL 997764 KS72F2300 2 5/8" 2 3/8" 11mm 51mm Chain Size Chain Size (metric) Part # Length Length 999478 999478 5' 150 cm N/A N/A N/A 1 1 $98.70 999461 999461 3' 3" 100 cm N/A N/A N/A 1 1 52.20 UPC 720018- Shackle Dimension A B C ShackleShackle Dimension (metric) A B C Cylinder Case Type Pack Master List Price Pack Each CHAIN ONLY NOTE: 1) For master keyed or keyed alike products, order chain, padlocks and cylinders separately. Order chains #999478 or #999461 with padlock KS72F2300. Prices are for chains only. Chains and Padlocks must be ordered separately. Shackle Dimensions Price Book 8 292 Effective April 4, 2020 • Rev. 04/20 Key-In-Lever Less Cylinder Portable Security • Key-in-Lever Less Cylinder 2040 Series Series Available in 606 Brass Portable Security 3/4” 3/4” 1 1/2” 1 1/2” 2“ 2“ KS23D 4“ 4“ KS43F UPC 720018- Part # Width Height Depth Shackle Dimension (metric) A B C A B C Cylinder Case Type Pack Master List Price Pack Each LESS CYLINDER - BRASS 000259 KS23D2200 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm KNK 6 24 $52.20 000266 KS23F2200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNK 6 24 52.50 000297 KS43D2200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm KNK 6 24 56.20 000303 KS43F2200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm KNK 6 24 56.50 19mm Price Book 8 Effective April 4, 2020 • Rev. 04/20 293 PS-5 Shackle Dimension Body Size SFIC - Less Cylinder • Portable Security Less Cylinder - SFIC 20 Series Series Locking Head is 407 Satin Finish Portable Security Available in 625 Chrome Plated Brass 3/4”3/4” 1 1/2” 1 1/2” KS23D 2“ 2“ KS21F 4“ 4“ KC Series Shackle Dimension PS-6 Body Size UPC 720018- Part # Width Height Depth Shackle Dimension (metric) A B C A B C Cylinder Case Type Pack Master List Price Pack Each LESS CYLINDER - CHROME PLATED BRASS 997658 KS11D1200 1 25/32" 2 3/16" 7/8" 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm SFIC 6 24 $31.10 997641 KS11F1200 1 25/32" 2 3/16" 7/8˝ 1/4" 2" 3/4" 6.4mm 51mm 19mm SFIC 6 24 32.50 997498 KS21D1200 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm SFIC 6 24 33.00 8mm 51mm 997481 KS21F1200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 19mm SFIC 6 24 34.60 997375 KS41D1200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm SFIC 6 24 33.00 997368 KS41F1200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm SFIC 6 24 34.60 Cable Size UPC 720018- Part # Length 19mm Cable Size (metric) Diameter Length Diameter Cylinder Type Case Pack Master Pack List Price Each LESS CYLINDER - SMALL FORMAT INTERCHANGEABLE CORE 998747 KC215A130 2' 5/8" 60cm 15mm SFIC 1 5 $62.60 998754 KC215B130 4' 5/8" 121cm 15mm SFIC 1 5 67.00 Price Book 8 294 Effective April 4, 2020 • Rev. 04/20 s Portable Security • Full Size IC Core Less Cylinder - IC Core 40 Series Available in 606 Brass Portable Security 1 1/2” 3/4” 2“1 1/2” KS43D 4“ 2“ KS43F 4“ UPC 720018- Part # Width Height Depth Shackle Dimension (metric) A B C A B C Cylinder Case Type Pack Master List Price Pack Each LESS CYLINDER - BRASS 999140 KS43D3200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm IC 6 24 $64.80 999157 KS43F3200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm IC 6 24 68.60 19mm Price Book 8 Effective April 4, 2020 • Rev. 04/20 295 PS-7 Shackle Dimension Body Size Locking Cables, Security Chains and Padlocks • Portable Security Portable Security Custom Engraving - Optional KSxxxxx XKS-000-xxx CLR Assigned Number per Technical Services Brass Padlock/Chrome Plated Brass Padlock Stock NOTES: 1) A one time set up cost of $85 net will be added to the first order under part number 50-020. 2) A $8.00 net per piece engraving fee will be added to net product cost. 3) Custom engraving requires submission of completed “Custom Logo Request” form (see Forms) and scaleable logo line art in DXF format to LOCKSUPPORT@ALLEGION.COM. 4) Minimum order quantity is 6. 5) XKS-000-XXX part number is assigned by Technical Services and is keyed in the accessory field as part of the product part number. PS-8 Custom engraving is available on the following parts. Brass Padlocks - Listed on page KS23D2300 KS23F2300 KS43D2300 Chrome Plated Brass Padlocks - Listed on page KS11D1200 PS-5 KS11F1200 KS21D1200 KS43F2300 KS21F1200 KS23D2200 KS41D1200 KS23F2200 KS43D2200 PS-6 KS41F1200 KS43F2200 KS43D3200 KS43F3200 PS-8 Price Book 8 296 Effective April 4, 2020 • Rev. 04/20 PS-7 Parts and Accessories • Portable Security FEATURES & SPECIFICATIONS • Parts and Accessories discounted at full lock discount. • Must be ordered in box quantity. 40 Series 40 Shackles Series Shackles 40 Series Shackles 3/8" x 3/4" 5/16" x2“ 2" 2“ 4“ Portable Security 3/4” 3/4”3/4”1 1/2” 1 1/2” 2“ 1 1/2” 4“ 4“ 1/4" x 4" Shackle Dimension UPC 720018- Part # A Shackle Dimension (metric) B C A B C Box Quantity Carton Quantity List Price Each HARDENED STEEL SHACKLES - FOR USE WITH 20 SERIES PADLOCKS KZ11D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 $8.00 997115 KZ11G20 5/16" 4" 3/4" 8mm 102mm 19mm 6 36 11.60 HARDENED STEEL SHACKLES - FOR USE WITH 40 SERIES PADLOCKS 997139 KZ11F40 3/8" 2" 3/4" 9.5mm 51mm 19mm 6 36 $10.30 997108 KZ11G40 3/8" 4" 3/4" 9.5mm 102mm 19mm 6 36 14.20 BRASS SHACKLES - FOR USE WITH 20 SERIES PADLOCKS 997054 KZ12D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 $7.50 996996 KZ12G20 5/16" 4" 3/4" 8mm 102mm 19mm 6 36 $11.50 BRASS SHACKLES - FOR USE WITH 40 SERIES PADLOCKS 997047 KZ12D40 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm 6 18 $10.00 996989 KZ12G40 3/8" 4" 3/4" 9.5mm 102mm 19mm 6 18 14.20 STAINLESS STEEL SHACKLES - FOR USE WITH 20 SERIES PADLOCKS 001294 KZ13D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 $8.00 001300 KZ13F20 5/16" 2" 3/4" 8mm 51mm 19mm 6 36 8.30 STAINLESS STEEL SHACKLES - FOR USE WITH 40 SERIES PADLOCKS 001317 KZ13D40 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm 6 36 $10.00 001324 KZ13F40 3/8" 2" 3/4" 9.5mm 51mm 19mm 6 36 10.30 Price Book 8 Effective April 4, 2020 • Rev. 04/20 297 PS-9 997177 Special Security • Auxiliary Products 855118 Portable Security 855101 Hasps Specialty Security Products HASPS - HIGH-SECURITY Part Number Description 855101 Vehicle or Gate Security Hasp 855118 Flexible Double-Hinge Steel Security Hasp Body Dimension 8-1/2" x 4-1/2" 7-3/4" x 1-3/4" PS-10 UPC 855101 855118 Price Book 8 298 Effective April 4, 2020 • Rev. 04/20 Carton Quantity 3 6 List Price Each $40.40 12.90 Flex Security • Portable Security Padlocks 999232 Portable Security FLEX SECURITY FEATURES & SPECIFICATIONS • Non rekeyable • Retail vis-packed • Must be ordered in case quantity multiples 850410 855156 Special Use Padlocks Part Number Shackle Dimension Shackle Dimension (metric) PS-11 UPC A B C A B C Padlock Width Case Qty Price Each 1/2" 11" 4" 12mm 275mm 102mm 7 1/4" 5 $38.00 – – – – – – 2 7/8" 6 $49.00 Extra Large Padlock 720018999232 999232 Shackle-less Padlock 720018855156 855156 Covered Laminated Steel Padlocks UPC Part Number Shackle Dimension A B C Padlock Width Case Qty 1/4" 1 1/8" 3/4" 1 1/2" 3 Price Each Covered Laminated Steel Padlocks 720018850410* 850410* $27.00 * 2 KA units per pack. 6 Packs keyed different per case. Shackle Dimensions Price Book 8 Effective April 4, 2020 • Rev. 04/20 299 Security Chains, Security Cables & Locking Cables Flex Security • Portable Security 999201 999218 999225 820406 999270 999256 999263 999249 Portable Security 999461 999478 994800 994862 PS-12 FLEX SECURITY FEATURES & SPECIFICATIONS • Non rekeyable • Retail vis-packed • Must be ordered in case quantity multiples Security Chains UPC Shackle Dimension Part Number A Chain Length Case Qty Price Each Link Dimensions Cinch Ring Security Chains 720018999478 999478 1/2" 5' 1 $94.00 720018999461 999461 1/2" 3' 3" 1 49.70 Security Cables and Locking Cables UPC Part Number Cable Dia. Loop Dimension B C Cable Length Case Qty 5/8" – – 6' 5 $70.00 A Price Each Heavy Duty Locking Cable - Schlage Rekeyable 720018999201 999201 Flexible Steel Cables 720018999270 999270 3/8" 2 1/4" 1 1/8" 30' 4 $58.30 720018999263 999263 3/8" 2 1/4" 1 1/8" 15' 4 36.30 720018999256 999256 3/8" 2 1/4" 1 1/8" 7' 4 21.40 720018999249 999249 3/8" 2 1/4" 1 1/8" 4' 4 16.70 999218 1/2" – – 5' 4 $29.90 3/8" – – 5' 4 $31.00 Key Cable 720018999218 Resettable Combination Cable 720018999225 999225 Flexible Steel Cable and Covered Laminated Steel Padlock 720018994800 994800 3/8" 2 1/4" 1 1/8" 4' 4 $28.00 720018994862 994862 3/8" 2 1/4" 1 1/8" 15' 4 44.00 Price Book 8 300 Effective April 4, 2020 • Rev. 04/20 Loop Dimensions Cylinders CYLINDERS CYLINDERS / KEYS / AUXILIARY Springs Top pins Master pins Bottom pins Key CYL-1 Exploded View - Everest Key-in-Knob/Lever Cylinder Shell Tailpiece Keys Retainer cap Retainer cap pin Retainer cap pin spring Undercut groove Plug CL-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 301 CYLINDERS To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 Product 10 20-001 S125 Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Dim: Additional Details: CYL-2 CYLINDERS / KEYS / AUXILIARY Ordering Procedures DES FIN Inside DES FIN Hand Latch Strike Dr Thk Ext DIM 626 118 Line item number Quantity Product number + keyway Not Applicable Cylinder face finish color (for Key in Lever cylinders, choose plug face color - 606 or 626) Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable for mortise cylinder length (Written as 1 1/8" = 118, 1 3/4" - 134 etc.) Keying instructions (KA, KD, 0-bitted), Primus XP #, Everest 29 Facility Code, Locksmith ID#, Additional stamping instructions CL-Series Keys Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1 ¾" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified with “C” keyway and KD or 0-bitted will receive 6 pin cylinders. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626, 643e, 622. For brass or satin bronze finish colors, the plug face finish is 606. For oil rubbed or aged bronze finish colors, the 643e plug face will be furnished. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $17.40 per cylinder. 17. For hotel function cylinders: Not available in Primus. Furnished 0-bitted. Emergency keys must be ordered separately. 18. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 302 Additional Details Effective April 4, 2020 • Rev. 04/20 Introduction CYLINDERS Product Identification Multiple Tailpiece Cylinders CYL-4 Bulk Pack Cylinders CYL-5 Primus Cylinders-Sub-Assembled CYL-9 CYL-10 A & H, AD, AL, CL, D, ND, KS, S & S200 Tailpieces & Actuators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-16 Miscellaneous Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-17 B500 CYL-18 Conventional Cylinders & Housings. . . . . . . . . . . . . . . . . . . . . . CYL-18 Tailpieces, Drivers & Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-19 B250, B400, E/B, F100, H, MD, S200 CYL-20 Deadbolt Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-20 IC Cylinders & Miscellaneous Parts . . . . . . . . . . . . . . . . . . . . . . CYL-21 Collars, Tailpieces and Reference Tables. . . . . . . . . . . . . . . . CYL-22 CYL-24 B600/700/800 Reference Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-24 Miscellaneous Parts and Tailpieces. . . . . . . . . . . . . . . . . . . . . CYL-26 IC Housings and Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-27 Mortise CYL-28 Conventional Cylinders, L-Series . . . . . . . . . . . . . . . . . . . . . . . CYL-28 Conventional Cylinders for Adams Rite, Adams Rite, Lori & Corbin Russwin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-29 Concealed Shell Cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-31 Cams, Cam Screws, Dummy Cylinder . . . . . . . . . . . . . . . . . . . CYL-32 Full Size Interchangeable Core. . . . . . . . . . . . . . . . . . . . . . . . . . CYL-33 Small Format Interchangeable Core. . . . . . . . . . . . . . . . . . . . CYL-35 Cylinder Lengths and Collars By Application. . . . . . . . . . . . . CYL-37 Blocing Ring Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-38 CYL-39 Schlage cylinders for Falcon & Von Duprin Rim Cylinders CYL-41 CYL-43 Interchangeable Cores Full Size Interchangeable Cores. . . . . . . . . . . . . . . . . . . . . . . . CYL-43 Small Format Interchangeable Cores . . . . . . . . . . . . . . . . . . CYL-44 CYL-45 Competitor Retrofit Cylinders Corbin Russwin, Sargent, Yale Key-in-Knob/Lever. . . . . . CYL-45 Reference Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-46 Corbin Russwin Master Ring. . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-47 Cams to Operate Competitor Locks . . . . . . . . . . . . . . . . . . . . CYL-48 CYL-50 Letter/Mail Box Special Cylinders CYL-51 CYL-52 Pins, Springs & Pinning Components Full Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-52 Small Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-53 CYL-56 Plugs Shells CYL-57 20-001 118 XXXX Keyway Dimension Cylinder Assembly Full Size Cylinders and Cores When ordering full size cylinders, specify the standard or Primus cylinder number, dimension (where required), keyway (e.g. C, CP, C123, S123 etc ) or keyway family (e.g. Obverse, Everest Family, Everest D Family, Everest 29 T) and finish. If no keyway is specified, master keyed products will default to Everest 29 S145 and non-master keyed products will default to S123. ® CYLINDERS / KEYS / AUXILIARY Table of Contents Small Format Interchangeable Cores CYL-3 Small format cores are available only in Everest and Everest 29 restricted keyways and certain Best® keyways. Small format cores cannot be keyed into the same system as full size cylinders and cores because the keyways are different. See Schlage Cylinder & Keyway Terminology for more details on Schlage’s terminology. Finish Codes and Descriptions Description Bright Brass Satin Brass Antique Brass Satin Bronze Oil Rubbed Bronze Satin Nickel Matte Black Bright Chromium Plated Satin Chromium Plated Bright Stainless Steel Satin Stainless Steel Aged Bronze Keys CL-Series Code 605 (US 3) 606 (US 4) 609 (US 5) 612 (US 10) 613 (US 10B) 619 (US 15) 622 (US 19) 625 (US 26) 626 (US 26D) 629 (US 32) 630 (US 32D) 643e (US11) Standard Features* Certification BHMA certified to ANSI A156.5, 2001, Grade 1 Operational Key Patents Primus XP keys are protected against unauthorized duplication by U S utility patents 7 159 424 Everest and Everest Primus XP keys are protected by U S design patents 428,324 and 426,452. Everest 29 and Everest 29 Primus XP keys are protected by U S patent US 7,665,337 Standard Solid Brass 6 pin plugs and shells. Mortise and Rim cylinders utilize a two piece Stainless Steel sintered housing secured by Cylinder 2 Torx® screws. Standard keyway is Everest 29 S123, furnished Keyed Different (KD) with two 6 pin nickel silver keys (except F series knobs and levers). Mortise cylinder standard lengths are 1 1/8" for conventional cylinders, 1 1/2" for large format interchangeable core and 1 3/8" for small format interchangeable core. SFIC Everest 29 R and Everest B combinated cores includes 2 change keys. Small format cores are available either uncombinated or combinated. Control keys must be ordered separately. FSIC Full size standard pinned cores are furnished 1-bitted. Primus cores are furnished 0-bitted. Primus Primus XP cylinders are furnished MK, KA, KD, or Less Key Blank (LKB). See Terms & Conditions: Primus Sales Policy for additional details. Conventional standard pinned cylinders: Available 0-Bitted. 1-Bitted is not available and if specified, 0-bitted will be furnished. Standard pinned FSIC cylinders: Furnished 1-bitted. 0-Bitted is not available and if specified, 1-bitted will be furnished. Primus cylinders: Furnished 0-bitted. 1-Bitted is not available and if specified, 0-bitted is furnished. Price Book 8 Effective April 4, 2020 • Rev. 04/20 303 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Multiple Tailpiece Key-in Knob/Lever Reduce Cylinder Inventory Multiple tailpiece cylinders allow high inventory flexibility with low investment. Included with each cylinder are tailpieces to suit these locks: • • • • • A-Series (all designs) AL-Series D-Series Knobs H-Series Knobs (all designs) ND-Series Levers Cylinders are furnished 0-bitted. Standard pinned cylinders are furnished with two (2) blank keys. Not available in Faculty Restroom (hotel) function. CL-Series Keys CYL-4 Multiple Tailpiece Key-in-Knob/Lever Cylinders Part Number Keyway Contents All Keyways Everest, Everest 29 and Classic Families (1) Pre-assembled cylinder 0-bitted, less tailpiece (1) A301-338 tailpiece, A & H-Series Orbit (1) A700-031 tailpiece, A, AL, H-Series (except Orbit) (1) C603-524 tailpiece, D-Series Knobs (1) N523-022 tailpiece, ND-Series Levers (yellow) (2) C503-115 cap pin springs (2) C503-116 cap pins (2) Key Blanks 35-009 (Everest C) OR 35-002 (Everest D) OR 35-270 (Everest 29 S) OR 35-268 (Everest 29 T) Primus / Primus XP All Keyways (Classic, Everest and Everest 29) Order Examples: (1) Pre-assembled cylinder 0-bitted, less tailpiece, LESS keys (1) A301-338 tailpiece, A & H-Series Orbit (1) A700-031 tailpiece, AL-Series (1) C603-524 tailpiece, D-Series Knobs (1) N523-022 tailpiece, ND-Series Levers (yellow) (2) C503-115 cap pin springs (2) C503-116 cap pins ****Primus Keys must be ordered separately**** Price Each Open Restricted 40-100 65.00 83.00 40-700* / 40-700-XP Controlled Access 146.00 146.00 40-500* / 40-500-XP UL437 Listed 179.00 179.00 40-100 626 S123 40-700-XP 606 S123 (must specify Primus account information and provide necessary Primus documents) *Primus key blanks must be ordered separately. Price Book 8 304 Effective April 4, 2020 • Rev. 04/20 Key-in-Knob/Lever Interchangeable Cores Bulk Pack • CYLINDERS Bulk Packs are kits that contain all of the components needed to build 10 cylinders. For added convenience the shells are pre-loaded with pins and springs and slid onto a follower. Cams and tailpieces are sold separately in economical 10-packs to maximize flexibility. Keys and Primus components are also sold separately. The unit price of the unassembled cylinder is up to 15% less than buying it completely assembled. In addition to this savings, labor time is reduced since cylinders don’t have to be taken apart before being pinned in the field. Not available in Faculty Restroom (hotel) functions. Must specify finish color, length and keyway. 09-764* Everest Primus and Everest 29 Primus Bulk Pack CYLINDERS / KEYS / AUXILIARY Key Large Jobs Faster! (Includes 10 of each item shown) 10-Piece Bulk Pack Key-in-Knob/Lever Cylinders Loaded shells Cap pins Plugs Cap pin springs Caps Price Each Pack Cylinder Mechanism Keyway Type Bulk Pack Number Open Restricted Classic 09-409 $503.00 $683.00 Standard Everest and Everest 29 Family 09-751 503.00 683.00 Primus/Primus XP Everest and Everest 29 09-764 995.00 Primus/Primus XP Classic 09-833 995.00 Keyway Type Bulk Pack Number Open Restricted Classic 09-412 $593.00 $773.00 Standard Everest and Everest 29 Family 09-754 593.00 773.00 Primus/Primus XP Everest and Everest 29 09-767 1,023.00 Primus/Primus XP Classic 09-835 1,023.00 Cylinder Mechanism Keyway Type Bulk Pack Number Price Each Pack Open Restricted Classic 09-410 $689.00 $869.00 Standard Everest and Everest 29 Family 09-752 589.00 869.00 Primus/Primus XP Everest and Everest 29 09-765 1,128.00 Primus/Primus XP Classic 09-834 1,128.00 Keyway Type Bulk Pack Number Price Each Pack Open Restricted Classic 09-411 $608.00 $788.00 Standard Everest and Everest 29 Family 09-753 608.00 788.00 Primus/Primus XP Everest and Everest 29 09-766 1,040.00 Primus/Primus XP Classic 09-836 1,040.00 Everest 29 SL Everest B & Everest 29 R 91-454 783.00 Everest 29 SL Primus XP Everest B & Everest 29 R 91-554 1,040.00 Contents (10 each) Check pins (Everest and Everest 29 standard pinned only) Check pin springs Cylinder Mechanism Contents (10 each) Loaded shells Plugs Cam Screws Check pins (Everest and Everest 29 standard pinned only) Check pin springs Price Each Pack Keys See next page for cams, collars sold separately. Available in 1 1/8" and 1 1/4" only. CYL-5 10-Piece Bulk Pack Mortise Cylinders 10-Piece Bulk Pack Rim Cylinders Contents (10 each) Drivers Cap pin springs Screws & back plate packs Check pins (Everest and Everest 29 standard pinned only) Check pin springs CL-Series Loaded shells Plugs Caps Cap Pins Collars Tailpieces 10-Piece Bulk Pack Interchangeable Cores Cylinder Mechanism Contents (10 each) Loaded shells Plugs Caps Cap pins & springs Actuating rings Actuating pins Control pins Check pins (Everest and Everest 29 standard pinned only) Check pin springs Price Book 8 Effective April 4, 2020 • Rev. 04/20 305 CYLINDERS • Multiple Tailpiece CYLINDERS / KEYS / AUXILIARY Key-in Knob/Lever Part Number Keyway Contents Everest B and Everest 29 R Families of keyways "(1) 33-213 Plug (1) A508-660 Body (1) C604-471 Retaining Clip (1) 90-210 Locking Sidebar for SL (2) C604-472 SL Sidebar Springs (1) 34-950 R/B Everest Check Pin (1) C504-116 R/B Everest Check Pin Spring (1) 90-212 SL Plug cover (1) 90-211 End Cap for SL Cylinders (1) 90-002 SL End Cap Pin (1) C603-952 SL End Cap Spring (1) A301-338 tailpiece, A & H-Series Orbit (1) A700-031 tailpiece, A, AL, H-Series (except Orbit) (1) C603-524 tailpiece, D-Series Knobs (1) N523-022 tailpiece, ND-Series Levers (yellow) Keys CYL-6 Unassembled Multiple Tailpiece Key-in-Lever SL Cylinders Price Each Restricted 91-200 $54.00 91-700 Controlled Access 98.00 ***Cylinder Is Shipped Unassembled In The Box*** ****Does Not Include L Pins, L Pin Springs Or Key Blanks****" CL-Series Primus XP Everest B and Everest 29 R Families of keyways "(1) Plug for SL Primus XP (1) A508-661 SL Primus XP Body (1) C604-471 Retaining Clip (1) 90-210 Locking Sidebar for SL (2) C604-472 SL Sidebar Springs (1) C603-950 Primus Sidebar (2) C603-952 Primus Side Bar Springs (1) 90-212 SL Plug cover (1) 90-211 End Cap for SL Cylinders (1) 90-002 SL End Cap Pin (1) C603-952 SL End Cap Spring (1) A301-338 tailpiece, A & H-Series Orbit (1) A700-031 tailpiece, A, AL, H-Series (except Orbit) (1) C603-524 tailpiece, D-Series Knobs (1) N523-022 tailpiece, ND-Series Levers (yellow) ***Cylinder Is Shipped Unassembled In The Box*** ****Does Not Include L Pins, L Pin Springs, Primus Finger Pins, Primus Finger Pin Springs Or Key Blanks****" Price Book 8 306 Effective April 4, 2020 • Rev. 04/20 Bulk Pack • CYLINDERS Cylinder Type Contents (10) 33-213 Plug (10) A508-660 Body (10) C604-471 Retaining Clip (10) 90-210 Locking Sidebar for SL (20) C604-472 SL Sidebar Springs (10) 34-950 R/B Everest Check Pin Key-inLever (10) C504-116 R/B Everest Check Pin Spring (10) 90-212 SL Plug cover (10) 90-211 End Cap for SL Cylinders (10) 90-002 SL End Cap Pin (10) C603-952 SL End Cap Spring ***Cylinder Is Shipped Unassembled In The Box*** ****Does Not Include L Pins, L Pin Springs Or Key Blanks**** (10) Plug for SL Primus XP (20) C603-952 Primus Side Bar Springs (10) A508-661 SL Primus XP Body (10) 90-212 SL Plug cover (10) C604-471 Retaining Clip (10) 90-211 End Cap for SL Cylinders (10) 90-210 Locking Sidebar for SL (10) 90-002 SL End Cap Pin (20) C604-472 SL Sidebar Springs (10) C603-952 SL End Cap Spring (10) C603-950 Primus Sidebar ***Cylinder is shipped unassembled in the box*** ****Does not include L pins, L pin springs, Primus finger pins, Primus finger pin springs or key blanks**** Keyway Bulk Pack Number Price Each Pack Restricted SL Cylinder Everest B or Everest R Keyway Families 91-451 $527.00 SL Primus XP Everest B or Everest R Keyway Families 91-551 971.00 SL Cylinder Everest B or Everest R Keyway Families 91-452 617.00 Everest B or Everest R Keyway Families 91-552 1,067.00 Everest B or Everest R Keyway Families 91-453 659.00 Everest B or Everest R Keyway Families 91-553 1,103.00 (10) Plug for SL Primus XP (10) A508-661 SL Primus XP Body (10) C604-471 Retaining Clip (10) 90-210 Locking Sidebar for SL (20) C604-472 SL Sidebar Springs (10) C603-950 Primus Sidebar (20) C603-952 Primus Side Bar Springs (10) 90-212 SL Plug cover (10) Front and Back Rim Housings with Screws (Specify Finish) (10) Rim Cylinder Driver and Tailpiece (10) 90-211 End Cap for SL Cylinders (10) 90-002 SL End Cap Pin (10) C603-952 SL End Cap Spring SL Primus XP CL-Series Rim (10) Plug for SL Primus XP (20) C603-952 Primus Side Bar Springs (10) A508-661 SL Primus XP Body (10) 90-212 SL Plug cover (10) C604-471 Retaining Clip (10) Front and Back Mortise Housings (10) 90-210 Locking Sidebar for SL with Screws (Specify Finish and Length) (20) C604-472 SL Sidebar Springs (10) 90-002 SL End Cap Pin SL Primus (10) C603-950 Primus Sidebar (10) C603-952 SL End Cap Spring XP ***Cylinder is shipped unassembled in the box. See SL cams table for available cams. Cams and collars sold seperately*** ****Does not include L pins, L pin springs, Primus finger pins, Primus finger pin springs or key blanks**** (10) 33-213 Plug (10) 90-212 SL Plug cover (10) A508-660 Body (10) Front and Back Rim Housings with (10) C604-471 Retaining Clip Screws (Specify Finish) (10) 90-210 Locking Sidebar for SL (10) Rim Cylinder Driver and Tailpiece (20) C604-472 SL Sidebar Springs (10) 90-211 End Cap for SL Cylinders SL Cylinder (10) 34-950 R/B Everest Check Pin (10) 90-002 SL End Cap Pin (10) C504-116 R/B Everest Check Pin (10) C603-952 SL End Cap Spring Spring ***Cylinder is shipped unassembled in the box*** ****Does not include L pins, L pin springs or key blanks**** Keys Mortise (10) C504-116 R/B Everest Check Pin Spring (10) 90-212 SL Plug cover (10) Front and Back Mortise Housings with Screws (Specify Finish and Length) (10) 90-002 SL End Cap Pin (10) C603-952 SL End Cap Spring ***Cylinder is shipped unassembled in the box. See SL cams table for available cams. Cams and collars sold seperately*** ****Does not include L pins, L pin springs or key blanks**** CYL-7 (10) 33-213 Plug (10) A508-660 Body (10) C604-471 Retaining Clip (10) 90-210 Locking Sidebar for SL (20) C604-472 SL Sidebar Springs (10) 34-950 R/B Everest Check Pin Cylinder Mechanism ***Cylinder is shipped unassembled in the box*** ****Does not include L pins, L pin springs, Primus finger pins, Primus finger pin springs or key blanks**** Price Book 8 Effective April 4, 2020 • Rev. 04/20 CYLINDERS / KEYS / AUXILIARY 10-Piece Bulk Packs for Unassembled Everest and Everest 29 SL Cylinders 307 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Bulk Pack Key-in-Knob/Lever Interchangeable Cores Bulk Pack Modular & SL Cylinder Cams and Collars Keyway Type Type Contents (10 each) Straight Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) Straight Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L-Series Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L-Series Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) Adam’s Rite Kit - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) Adam’s Rite Kit - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) Straight Cam - Twist and Lock Design for 1-1/8" Everest SL Straight Cam - Twist and Lock Design for 1-1/4" Cylinders L Series Cam - Twist and Lock Design for 1-1/8" using Everest B and L Series Cam - Twist and Lock Design for 1-1/4" Everest 29R Adams Rite Cam - Twist and Lock Design for 1-1/8" Keyways Adams Rite Cam - Twist and Lock Design for 1-1/4" * Specify finish 605, 606, 612, 613, 625 or 626. All (Classic / Everest C, D, Everest 29 S, T & Primus, etc) L583-476 L583-477 L583-474 L583-475 L583-446 36-079-037 B220-050 L583-447 36-079-037 B220-050 L583-802 L583-803 L583-800 L583-801 L583-773 36-079-037 B220-050 L583-774 36-079-037 B220-050 Bulk Pack Part Number 09-195 09-196 09-197 09-198 09-199* 09-200* 91-194 91-195 91-196 91-197 91-198 91-199 Cylinder Mechanism Description All Modular Cylinders (Classic, Everest & Primus) A-Series (except Orbit) A-Series Orbit (except A73) AL-Series D-Series Levers D-Series Knob ND-Series Levers Contents (10 each) A301-337 with C603-098 security disc A301-338 A700-031 C604-243 C603-524 N523-022 (yellow) CL-Series Keys CYL-8 10-Piece Tailpiece Packs for Bulk Pack Cylinders (Classic, Everest, Everest 29 & Primus) Price Book 8 308 Effective April 4, 2020 • Rev. 04/20 Bulk Pack Part Number 09-756 09-757 09-416 09-418 09-417 09-019 Price Each Pack $31.90 31.90 31.90 31.90 160.00 160.00 49.40 49.40 49.40 49.40 176.00 176.00 Price Each Pack $67.00 13.80 Bulk Pack • CYLINDERS Mortise, Rim, Primus Cylinder-Sub Part Number 20-201 20-202 20-203 20-204 Primus Classic, Everest or Everest 29 (Specify Keyway) 20-205 20-206 20-207 20-208 20-211 Primus Classic, Everest or Everest 29 UL437 (Specify Keyway) 20-212 $98.00 113.00 116.00 104.00 98.00 113.00 116.00 104.00 124.00 138.00 142.00 124.00 138.00 Keys 20-213 Primus classic Key in Lever sub-assembled multiple tailpiece (A & H series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243, ND Series N523-022). * Primus Classic Mortise Cylinder (specify 1-1/4" or 1-1/8") sub assembled multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Straight (L583-446 or L583-447).* Primus Classic Rim Cylinder sub-assembled. * Primus Classic FSIC sub-assembled. Primus Everest and Primus Everest 29 Key in Lever sub-assembled multiple tailpiece. (A & H-Series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243, ND-Series N523-022). * Primus Everest and Primus Everest 29 Mortise Cylinder (1-1/4" or 1-1 /8") sub-assembled multiple cams-Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Straight (L583-446 or L583-447). Primus Everest and Primus Everest 29 Rim Cylinder sub-assembled. * Primus Everest and Primus Everest 29 FSIC sub-assembled. * Primus Classic UL437 Key in Lever sub-assembled multiple tailpiece. (A & H -Series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243, ND-Series N523-022). * Primus Classic UL437 Mortise Cylinder (specify 1-1/4" or 1-1/8") sub assembled. Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Straight (L583-446 or L583-447).* Primus Classic UL 437 Rim Cylinder sub-assembled. * Primus Everest and Primus Everest 29 UL 437 Key in Lever sub-assembled. Multiple tailpiece (A & H-Series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243, ND-Series N523-022). * Primus Everest and Primus Everest 29 UL437 Mortise Cylinder (specify 1-1/4" or 1-1/8") sub assembled. Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Straight (L583-446 or L583-447).* Primus Everest and Primus Everest 29 UL 437 Rim Cylinder sub-assembled. * CYL-9 20-209 20-210 Price Each Type 20-200 CYLINDERS / KEYS / AUXILIARY Primus Cylinders-Sub-Assembled 142.00 * Please order separately: Keys, plug pins, Primus finger pins and finger pins springs, side bar and side bar springs. Primus Competitor Cylinders-Sub-Assembled Type 20-221 20-219 20-218 20-214 20-215 20-216 20-220 20-217 20-222 20-223 20-224 20-225 20-228 20-226 20-227 20-229 Primus, sub-assembly, key-in-lever cylinder for Corbin Russwin CL3300 C Primus, sub-assembly, key-in-lever cylinder for Corbin Russwin CL3400, CL3600 Primus, sub-assembly, key-in-knob cylinder for Corbin Russwin CK4200 Primus, sub-assembly, key-in-lever cylinder for Sargent 7, 8, 10 Line Levers Primus, sub-assembly, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs Primus, sub-assembly, key-in-knob cylinder for Sargent 6 Line Except B Knob Primus, sub-assembly, key-in-lever for Yale 5300LN, 5400LN Levers Primus, sub-assembly, key-in-knob Yale 5300, 5400, 6200 Knobs Primus, sub-assembly, key-in-lever cylinder for Sargent 7, 8, 10 Line Levers Primus, sub-assembly, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs Primus, sub-assembly, key-in-knob cylinder for Sargent 6 Line Except B Knob Primus, sub-assembly, key-in-knob Yale 5300, 5400, 6200 Knobs Primus, sub-assembly, key-in-lever for Yale 5300LN, 5400LN Levers Primus, sub-assembly, key-in-knob cylinder for Corbin Russwin CK4200 Primus, sub-assembly, key-in-lever cylinder for Corbin RusswinCL3400, CL3600 Primus, sub-assembly, key-in-lever cylinder for Corbin Russwin CL3300 Primus Classic, Everest or Everest 29 (Specify Keyway) Primus Classic, Everest or Everest 29 UL437 (Specify Keyway) Price Each CL-Series Part Number $104.00 142.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 309 Reference Tables A, AD, H-Series CYLINDERS / KEYS / AUXILIARY CYLINDERS • Key-in-Knob/Lever A GEO PLY A A73 C, D TUL ORB ORB Knobs Horizontal Tailpiece D thick door A, H A, H ORB Faculty Restroom Standard Functions Levers Vertical Tailpiece D D All Modular Cylinder Key Families D, ND AL AL ND Faculty Restroom Standard Functions All Modular Cylinder Key Families A & H-Series Knob Cylinder Reference Table Function Design Cylinder Mechanism CYL-10 Standard Except Orbit Complete Cylinder 21-002 Everest SL (B/R keyways only) 91-004 Primus 20-724 Primus-XP 20-724-XP Price Each Open Restricted $65.00 $83.00 83.00 145.00 Everest SL Primus XP 91-704-XP (B/R keyways only) Primus UL437 20-524 Primus UL437-XP 20-524-XP 145.00 179.00 Keys Everest SL UL437-XP 91-504-XP Standard Standard Functions CL-Series Orbit Except A73 Function 21-002-122 Everest SL (B/R keyways only) 91-005 Primus 20-724-122 Primus-XP 20-724-122-XP 65.00 83.00 145.00 Everest SL Primus XP 91-705-XP (B/R keyways only) 20-524-122 Primus UL437-XP 20-524-122-XP 145.00 179.00 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Classic 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Classic 33-137 Everest & Everest 29 33-138 Classic 33-136 Everest & Everest 29 33-119 Everest & Everest 29 33-221 Classic 33-216 Everest & Everest 29 33-235 Classic 33-216 Everest & Everest 29 33-235 Primus-XP - 21-003 Except Orbit Standard 21-003-168 96.00 114.00 96.00 114.00 Price Book 8 310 Classic Everest B & Everest 29 R NA Complete cylinder discontinued but may be assembled in the field. Primus UL437-XP Orbit Everest B & Everest 29 R 33-213 Everest SL UL437-XP 91-505-XP Primus UL437 A85, H185 Faculty Restroom 33-137 33-138 Standard Primus A73 Orbit Classic Plug (See CYL-53) Everest B & Everest 29 R NA 83.00 Primus UL437 Keyway Type Effective April 4, 2020 • Rev. 04/20 Shell (See CYL-55) Tailpiece (See CYL-14) A508-653 A508-660 A508-655 A301-337 A508-661 A508-655 NA NA A508-653 A508-660 A508-655 A301-338 A508-661 A508-655 NA NA A508-653 A301-339 A508-655 A508-653 A501-991 & C503-767 A501-693 Reference Tables AD-Series Key-in-Knob/Lever • CYLINDERS Function All Cylindrical Exit (993R, 993S, 993M) with ATH, 8AT design only All Cylinder Mechanism Complete Cylinder Standard 23-013 Everest SL (B/R keyways only) 91-017 Primus 20-750 Primus XP Price Each Open Restricted $65.00 $83.00 83.00 145.00 145.00 20-750-XP Everest SL Primus XP 91-715-XP (B/R keyways only) Primus UL437 20-550 179.00 Primus UL437 XP 20-550-XP 179.00 Standard 23-118 Everest SL (B/R keyways only) 91-019 Primus 20-854 Primus XP 65.00 83.00 83.00 145.00 145.00 20-854-XP Everest SL Primus XP 91-721-XP (B/R keyways only) Primus UL437 179.00 20-554 20-554-XP 179.00 Everest SL UL437-XP 91-521-XP 993R 993S 993M Except ATH, 8AT Standard 23-118 Everest SL (B/R keyways only) 91-019 Primus 20-854 Primus XP 65.00 83.00 83.00 145.00 20-854-XP 145.00 Everest SL Primus XP 91-721-XP (B/R keyways only) Primus UL437 Primus UL437 XP 145.00 179.00 20-554 20-554-XP 179.00 Everest SL UL437-XP 91-521-XP Classic 33-137 Everest & Everest 29 33-138 Everest B and Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-134 Classic 33-136 Everest & Everest 29 33-134 Everest B and Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-137 Everest & Everest 29 33-138 Everest B and Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-134 Classic 33-136 Everest & Everest 29 33-134 Everest B and Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Everest B & Everest 29 R NA Classic 33-137 Everest & Everest 29 33-138 Everest B and Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-134 Classic 33-136 Everest & Everest 29 33-134 Everest B and Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Everest B & Everest 29 R NA A508-653 A508-660 A508-655 C604-243 A508-661 A508-655 A508-653 A508-660 A508-655 23538085 A508-661 A508-655 NA CL-Series Primus UL437 XP 145.00 Plug Shell Tailpiece (See CYL-53) (See CYL-55) (See CYL-14) Keys All 145.00 Keyway Type CYL-11 MS, MD Design CYLINDERS / KEYS / AUXILIARY AD-Series Cylinder Reference Table NA A508-653 A508-660 A508-655 23538085 A508-661 A508-655 NA NA Price Book 8 Effective April 4, 2020 • Rev. 04/20 311 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Key-in-Knob/Lever Reference Tables AL, D-Series Knob AL-Series Cylinder Reference Table Function Design Cylinder Mechanism Standard Standard Functions All Complete Cylinder 21-020 Everest SL (B/R keyways only) 91-006 Primus 20-728 Primus-XP 20-728-XP Price Each Open Restricted $65.00 $83.00 83.00 145.00 Everest SL Primus XP 91-706-XP (B/R keyways only) Primus UL437 20-528 Primus UL437-XP 20-528-XP 145.00 179.00 CYL-12 Everest SL UL437-XP 91-506-XP AL85 Faculty Restroom Standard Plug (See CYL-53) Classic 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Everest B & Everest 29 R NA 96.00 21-021 Keyway Type 114.00 Classic 33-216 Everest & Everest 29 33-235 Keyway Type Plug (See CYL-53) Classic 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Shell Tailpiece (See CYL-55) (See CYL-14) A508-653 A700-031 A508-660 A508-655 A508-661 A700-031 A508-655 NA NA A508-653 A700-023 D-Series Knob Cylinder Reference Table Price Each Function Door Thickness Cylinder Mechanism Keys Standard Standard Complete Cylinder 23-001 Everest SL (B/R keyways only) 91-016 Primus 20-748 Primus-XP 20-748-XP Open Restricted $65.00 $83.00 81.50 145.00 CL-Series Everest SL Primus XP 91-714-XP (B/R keyways only) 20-548 Primus XP UL437 20-548-XP 179.00 Everest SL UL437-XP 91-514-XP Standard Functions Standard 2" - 2 1/2" D85 Faculty Restroom Primus UL437 145.00 Standard 2" - 2 1/2" 21-002 Everest B & Everest 29 R NA 65.00 Everest SL (B/R keyways only) 91-004 Primus 20-724 Primus-XP 20-724-XP Everest SL Primus XP (B/R keyways only) 91-704-XP 83.00 83.00 145.00 145.00 Primus UL437 20-524 Primus XP UL437 20-524-XP 179.00 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Everest SL UL437-XP 91-504-XP Everest B & Everest 29 R NA Standard Classic 33-216 Everest & Everest 29 33-235 Classic 33-216 Everest & Everest 29 33-235 Standard 23-003 96.00 23-003098 96.00 114.00 114.00 Price Book 8 312 Classic Effective April 4, 2020 • Rev. 04/20 Tailpiece Shell (See CYL(See CYL-55) 14) A508-653 A508-660 A508-655 C603-524 A508-661 A508-655 NA NA A508-653 A508-660 A508-655 A301-337 A508-661 A508-655 NA NA A508-653 C604-106 w/ C503767 Key-in-Knob/Lever • CYLINDERS Reference Tables D-Series, ND-Series Function Door Thickness Standard Functions Standard D85 Faculty Restroom Cylinder Mechanism Complete Cylinder Standard 23-013 Everest SL (B/R keyways only) 91-017 Primus 20-750 Primus-XP 20-750-XP Everest SL Primus XP (B/R keyways only) 91-715-XP Primus UL437 20-550 Primus UL437-XP 20-550-XP Standard 23-014 Price Each Open Restricted $65.00 $83.00 83.00 145.00 145.00 179.00 96.00 114.00 Keyway Type Plug Shell Tailpiece (See CYL-53) (See CYL-55) (See CYL-14) Classic 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Classic 33-216 Everest & Everest 29 33-235 CYLINDERS / KEYS / AUXILIARY D-Series Lever Cylinder Reference Table A508-653 A508-660 A508-655 C604-243 A508-661 A508-655 A508-653 C604-348 w/ C503-767 Function Door Thickness Cylinder Mechanism Standard Standard Everest SL (B/R keyways only) 91-018 Primus 20-765 Primus-XP 20-765-XP Everest SL Primus XP (B/R keyways only) 91-718-XP Primus UL437 20-565 Primus UL437-XP 20-565-XP Everest SL UL437-XP 91-518-XP Standard 23-000 Keyway Restricted Type Open $65.00 $83.00 83.00 145.00 145.00 179.00 Plug Shell (See CYL-53) (See CYL-55) Classic 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 Everest B & Everest 29 R NA 96.00 114.00 Classic 33-216 Everest & Everest 29 33-235 Tailpiece (See CYL-14) A508-653 A508-660 A508-655 N523-022 A508-661 A508-655 NA NA A508-653 N523-123 w/ C503-767 CL-Series ND85 Faculty Restroom 23-065 Price Each Keys Standard Functions Complete Cylinder CYL-13 ND-Series Lever Cylinder Reference Table Price Book 8 Effective April 4, 2020 • Rev. 04/20 313 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Key-in-Knob/Lever S, S200 (Lever Only) Cylinder Reference Table Cylinder Mechanism Design Standard Primus-XP Complete Cylinder 21-059 Everest SL (B/R keyways only) Primus 91-007 Keyed Levers 20-752 20-752-XP Everest SL Primus XP (B/R keyways only) 91-772-XP Primus UL437 20-552 Primus UL437-XP 20-552-XP Price Each Open Restricted $65.00 $83.00 83.00 145.00 145.00 179.00 Keyway Type Plug (See CYL-53) Classic 33-137 Everest & Everest 29 33-138 Everest B & Everest 29 R 33-213 Classic 33-136 Everest & Everest 29 33-119 Everest B & Everest 29 R 33-214 Classic 33-154 Everest & Everest 29 33-221 CL-Series Keys CYL-14 Reference Tables S, S200-Series Price Book 8 314 Effective April 4, 2020 • Rev. 04/20 Shell (See CYL-55) Tailpiece (See CYL-14) Sleeve S605-231 S605-192 A508-653 A508-660 A508-655 A508-661 A508-655 Key-in-Knob/Lever • CYLINDERS Reference Tables CL and Portable Security Drawer CL-Series Cabinet Lock Cylinder Reference Table Application Cylinder Mechanism Standard Door Everest SL (B/R keyways only) Primus Primus XP Drawer Standard Open Restricted 20-172 $65.00 $83.00 83.00 91-001 20-772 20-772-XP 20-572 20-572-XP 91-519-XP 179.00 65.00 20-174 Classic 33-137 33-138 Everest B & Everest 29 R 33-213 A508-660 Classic Everest & Everest 29 33-136 33-119 A508-655 Everest B & Everest 29 R 33-214 A508-661 Classic Everest & Everest 29 Everest B & Everest 29 R Classic Everest & Everest 29 33-154 33-221 NA 33-137 33-138 83.00 83.00 91-002 Everest B & Everest 29 R 33-213 A508-660 20-774 20-774-XP Classic Everest & Everest 29 33-136 33-119 A508-655 Everest B & Everest 29 R 33-214 A508-661 Classic Everest B & Everest 29 R Everest & Everest 29 33-154 NA 33-221 A508-655 NA A508-655 145.00 145.00 91-720-XP 20-574 91-520-XP 20-574-XP 179.00 Actuator (See CYL-15) A508-653 A508-655 NA CL10-360 A508-653 Keys Everest SL (B/R keyways only) Primus Primus XP Everest SL Primus XP (B/R keyways only) Primus UL437 Everest SL UL437-XP Primus XP UL437 145.00 Shell (See CYL-55) Everest & Everest 29 145.00 91-719-XP Plug (See CYL-53) Keyway Type CYL-15 Everest SL Primus XP (B/R keyways only) Primus UL437 Primus XP UL437 Everest SL UL437-XP Price Each Complete Cylinder KC-Series Cables KS-Series Padlocks CL-Series Portable Security Cylinders Application KS-Series KC-Series Price Each Cylinder Mechanism Complete Cylinder Open Restricted Standard 47-413 $65.00 $83.00 Primus® 47-743 Primus XP 47-743-XP Primus UL437 47-542 Primus XP UL437 47-542-XP Standard CYLINDERS / KEYS / AUXILIARY Door 47-414 Primus 47-744 Primus XP 47-744-XP Primus UL437 47-543 Primus XP UL437 47-543-XP 145.00 179.00 65.00 83.00 145.00 179.00 Keyway Type Plug (See CYL-53) Classic 33-137 Everest & Everest 29 33-138 Classic 33-136 Everest & Everest 29 33-119 Classic 33-154 Everest & Everest 29 33-221 Classic 33-137 Everest & Everest 29 33-138 Classic 33-136 Everest & Everest 29 33-119 Classic 33-154 Everest & Everest 29 33-221 Shell (See CYL-55) Actuator (See CYL-15) A508-653 KZ32DA0 A508-655 A508-653 KZ34DA0 A508-655 For pins, springs, etc., see CYL-50. Price Book 8 Effective April 4, 2020 • Rev. 04/20 315 Parts A, AD, AL, L, D, H, ND, S, S200-Series Keys CYL-16 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Key-in-Knob/Lever Tailpieces and Actuators Part Number A201-934 A73 Orbit A301-337 A, H Price Each Description $9.80 Classic conventional non modular cylinders 9.80 Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus) A301-337 requires C503-767 driver. 9.80 A301-338 A, H Orbit A301-339 A73 Orbit A501-693 A85, H185 Orbit Faculty Restroom function. Requires C503-767 driver. A501-991 A85, H185 Faculty Restroom function. Requires C503-767 driver. A508-606 A, H Classic conventional non modular. 3.30 9.80 10.30 A508-614 Orbit Classic conventional non modular. 2.00 A700-031 AL All except hotel function. 2.00 A700-023 AL85 Faculty Restroom function for Modular Cylinder. Requires C503-767 driver. 6.60 C503-524 D Knobs (Modular, Primus and Everest), Levers (Classic keyways prior to June 2010) 2.00 C604-243 D Levers (Modular, Primus and Everest), Knobs (Classic keyways prior to June 2010) 2.00 C604-106 D85 Knobs, hotel function. Requires C503-767 driver. 6.60 C604-107 D85 Knobs, hotel function, thick door. Requires C503-767 driver. 11.50 C604-348 D85 Levers, hotel function. Requires C503-767 driver. 6.80 N523-022 ND Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus). 2.00 N523-023 ND Classic Conventional (silver) non modular. 2.00 N523-123 ND85 Faculty Restroom function. Requires C503-767 driver. 6.30 S605-228 S, S200 Classic Conventional non modular. 3.00 S605-231 S, S200 Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus). Hotel Function Indicator Pins, Etc. Part Number C503-767 C603-195* C604-144 CL-Series Lockset C604-362 C604-368 C604-369 C604-371 C604-372 10.30 Price Each $2.20 1.60 Description Driver for hotel tailpieces Obstruction pin, Classic Indicator pin spring, Classic (order in multiples of 100) Obstruction pin, Everest & Everest 29 Indicator pin, Everest & Everest 29 Indicator pin spring, Everest & Everest 29 (order in multiples of 100) Indicator pin, Classic (except Reverse sections) Indicator pin, Classic (Reverse sections) 0.28 1.60 5.20 0.60 5.50 5.50 *Not compatible with Quad keyway cylinders manufactured before 1999. AD Series Lock - Tailpieces Part Number C603-524 C604-243 23538077 23538085 Description All AD Cylindrical Locks - CY AD Exit -993R, 993S, 993M All AD Cylindrical Locks AD Exit - 993R, 993S, 993M All AD Mortise locks - MS, MD AD Exit - 993R, 993S, 993M All AD Mortise locks - MS, MD AD Exit - 993R, 993S, 993M Keyway Classic non modular Modular Cylinders all keyway families (Classic, Everest, Everest 29 & Primus) Classic non modular Modular Cylinders all keyway families (Classic, Everest, Everest 29 & Primus) For pins, springs, etc., see CYL-50. Price Book 8 316 Effective April 4, 2020 • Rev. 04/20 Lever Style All ATH, 8AT All ATH, 8AT All Except ATH, 8AT All Except ATH, 8AT Price Each $2.00 2.00 2.00 2.00 Complete Locks • CYLINDERS Miscellaneous Parts Part Description Number CL10-301 CL-Series cylinder retaining screw CL10-360 CL-Series driver CL10-361 CL-Series actuator, 7/8" to 1 1/8" door or drawer CL10-362 CL-Series actuator, 1 3/8" door or drawer F605-038 F Series plug retainer (order in multiples of 100) KZ32BB0 KS Padlocks-Series cylinder housing screw (order in multiples of 30) KZ32DA0 KS Padlocks-Series cylinder driver(order in multiples of 30) KZ33DC0 KC Cable-Series driver mounting screw (order in multiples of 30) KZ34CA0 KC Cable-Series cylinder cap (order in multiples of 30) KZ34ED0 KC Cable-Series cylinder cap pin (order in multiples of 30) KZ34DA0 KC Cable -Series driver (order in multiples of 30) KZ38BA1** KS Padlocks 20, 40, 70, 80, 90 and KC-Series cylinder housing (order in multiples of 20) KZ38BA2** KS Padlock10 and KC-Series cylinder housing (order in multiples of 20) S605-192 S, S200 sleeve S605-228 S, S200 driver XA10-594* Spacer for 5-pin cylinder in 6-pin A or H-Series knob * Extended factory lead time. ** KC-Series Cables accept both the KZ38BA1 and the KZ38BA2 cylinder housings. CYLINDERS / KEYS / AUXILIARY Miscellaneous Parts Price Each 0.48 2.80 2.80 2.80 0.20 1.20 2.50 1.50 2.20 0.80 2.70 8.80 8.80 2.10 3.00 11.30 CYL-17 Keys CL-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 317 B500-Series Cylinders, Parts CL-Series Keys CYL-18 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Deadbolts B500 Series Cylinders - Single Cylinder Deadbolts Part Number 22-003 91-009 22-004 91-010 20-188 20-188-XP 91-702-XP 20-189 20-189-XP 91-703-XP 20-190 20-190-XP 20-191 20-191-XP 91-502-XP Description Standard Everest SL (R/B Keyways only) Standard Everest SL (R/B Keyways only) Primus Primus XP Everest SL Primus XP (R/B Keyways only) Primus Primus XP Everest SL Primus XP (R/B Keyways only) Primus UL Primus XP UL Primus UL Primus XP UL Everest SL UL437-XP Door Thickness 1 3/8" - 1 3/4" 1 3/8" - 1 3/4" 1 3/4" - 2 1/4" 1 3/4" - 2 1/4" 1 3/8" – 1 7/8" 1 3/8" – 1 7/8" 1 3/8" - 1 7/8" 1 7/8" – 2 1/4" 1 7/8" – 2 1/4" 1 7/8" - 2 1/4" 1 3/8" – 1 7/8" 1 3/8" – 1 7/8" 1 7/8" – 2 1/4" 1 7/8" – 2 1/4" 1 3/8" - 1 7/8" Part Number 22-645 91-014 22-646 91-015 20-745 20-745-XP 91-712-XP 20-746 20-746-XP 91-713-XP 20-545 20-545-XP 20-546 20-546-XP 91-512-XP Description Standard Everest SL (R/B Keyways only) Standard Everest SL (R/B Keyways only) Primus Primus XP Everest SL Primus XP (R/B Keyways only) Primus Primus XP Everest SL Primus XP (R/B Keyways only) Primus UL Primus XP UL Primus UL Primus XP UL Everest SL UL437-XP Door Thickness 1 3/8" - 1 3/4" 1 3/8" - 1 3/4" 1 3/4" - 2 1/4" 1 3/4" - 2 1/4" 1 3/8" – 1 7/8" 1 3/8" – 1 7/8" 1 3/8" - 1 7/8" 1 7/8" – 2 1/4" 1 7/8" – 2 1/4" 1 7/8" - 2 1/4" 1 3/8" – 1 7/8" 1 3/8" – 1 7/8" 1 7/8" – 2 1/4" 1 7/8" – 2 1/4" 1 3/8" - 1 7/8" B500 Series Cylinders - Double Cylinder Deadbolts* Price Each Open Restricted $65.00 $83.00 83.00 65.00 83.00 83.00 145.00 145.00 145.00 145.00 179.00 Price Each Open Restricted $65.00 $83.00 83.00 65.00 83.00 83.00 145.00 145.00 145.00 145.00 179.00 * Part numbers for double sided cylinders represent one cylinder only. B500 Series Cylinders - B561 One-Way Deadbolt Part Number 22-069 91-011 20-071 20-071-XP 91-701-XP 20-072 20-072-XP 91-501-XP Description Standard Everest SL (R/B Keyways only) Primus Primus XP Everest SL Primus XP (R/B Keyways only) Primus UL Primus XP UL Everest SL UL437-XP B500 Series Cylinder Parts Cylinder Mechanism Complete Cylinder Keyway Type Classic Everest & Everest 29 Standard Everest SL (B/R keyways only) Primus/Primus XP Everest SL Primus XP (B/R keyways only) Primus UL/Primus XP UL See single & double cylinder part numbers listed above 179.00 Plug 33-137 33-138 Everest 29 (R/B Keyways only) 33-213 Classic 33-136 Everest & Everest 29 33-119 Shell A508-653 A508-660 A508-655 Everest 29 (R/B Keyways only) 33-214 A508-661 Classic Everest & Everest 29 33-154 33-221 A508-655 Price Book 8 318 Price Each Open Restricted $65.00 $83.00 83.00 Door Thickness 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 1 7/8" Effective April 4, 2020 • Rev. 04/20 B500-Series Cylinders, Parts Deadbolts • CYLINDERS Part Number Description B520-651 B520-652 B202-957 B600-041 B520-667 B600-045* B600-046* B600-085* B600-086* B202-580* B600-040* B600-041 B520-653 Single Cylinder, B560P, B563P Single Cylinder, B560GD, B560BD, B563GD, B563BD Single Cylinder, B560R, B563R Single Cylinder, B561 Double Cylinder, B562P (Classic Non-Modular) Double Cylinder, B562P (Everest/Primus, Classic Modular) Double Cylinder, B562GD, B562BD Double Cylinder, B562R Keyless B580, B581 Keyless B571 * Order two of each for double cylinder deadbolts. Door Thickness 1 3/8" - 1 3/4" <1 3/4" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 1 3/4" <1 3/4" - 2 1/4" 1 3/8" - 1 3/4" <1 3/4" - 2 1/4" 1 3/8" - 2" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" Miscellaneous Parts Price Each $9.90 0.84 1.40 11.50 34.00 34.00 2.90 Housing Part Number* Door Thickness Single Cylinder, Small Format Interchangeable Core Single Cylinder, Full Size Interchangeable Core Outside Outside Outside Inside Outside Inside B610-204 B610-203 B610-204 B610-281** B610-205 B610-028** 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" 1 3/8" - 2 1/4" Double Cylinder, Full Size Interchangeable Core Price Each $59.10 63.70 59.10 59.10 63.70 60.90 CL-Series Cylinder Type Keys B500 Series IC Housings Double Cylinder, Small Format Interchangeable Core $2.80 CYL-19 Part Description Number 36-086* Collar (Trim ring) B600-071 Washer B300-108 Cylinder Retaining Screw B520-541 Security insert for collar B302-043* Housing, outside cylinder, conventional B520-648 Housing, inside cylinder, conventional B600-092* Inside snap-on faceplate only, for all non-IC double cylinder deadlocks * Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e. Price Each * Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e. ** Inside housing does not include snap-on faceplate. Miscellaneous Parts for B500 Series IC Cylinders Part Description Number B600-029 Driver, B560/562J B610-032 Cotter pin for tailpiece, B560/562J (1 = pack of 50) B600-106 Driver, SFIC B600-107 Throw member, SFIC B600-108 Waldes retaining ring, B560/562BD (multiples of 100) B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks B610-040 Tailpiece and cotter pin, B562J B610-041 Tailpiece and cotter pin, B560J * Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e. Price Each $5.50 46.70 17.40 3.20 0.38 9.80 10.40 15.10 14.80 Price Book 8 Effective April 4, 2020 • Rev. 04/20 CYLINDERS / KEYS / AUXILIARY Tailpieces 319 B250, H, S200-Series, CS200-Series CYL-20 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Deadbolts Cylinders Only, B250, H, and S200-Series (S200 ordered before Feb, 2008) Cylinder Only Price Each Description Part Number 5-Pin C, CE, E, F only 22-001 6-Pin Standard 22-002 Primus 20-729* Primus XP 20-729-XP Primus UL 437 20-529* Primus XP UL437 20-529-XP* * Must be used in locks with universal housings (B202-824 or B202-825). Open Restricted $65.00 $83.00 145.00 179.00 Cylinders Only S200 ordered after Feb, 2008 Single Cylinder Price Each Description Part Number 6-Pin Standard Primus Primus XP Primus UL 437 Primus XP UL437 22-081 24-769 24-769-XP 24-569 24-569-XP Open Restricted $65.00 $83.00 145.00 179.00 Cylinders CS200-Series Keys Price Each Description Part Number 6-Pin Standard 22-093 Open Restricted $65.00 $83.00 Housings With and Without Cylinders (S200 ordered before Feb, 2008) Price Each CL-Series Series B250, B400, E/B (Primus only), H (except H160), S200 Housing Universal (steel) Description Outside Inside Open Restricted $96.00 5-Pin C, CE, E, F 22-017 22-018 6-Pin Standard 22-019 22-020 Primus 20-730 20-731 Primus XP 20-730-XP 20-731-XP Primus UL437 20-530 20-531 Primus UL437 XP 20-530-XP 20-531-XP 211.00 Housing only B202-824 B202-825 29.10 96.00 Universal Housing (steel) 178.00 211.00 Price Each Description Part Number 6-Pin Standard $96.00 Primus 22-082 24-770 Primus XP 24-770-XP 178.00 Primus UL437 24-570 211.00 Primus XP UL437 24-570-XP 211.00 Housing only B202-824 29.10 Open Restricted 178.00 Cylinder Retaining Screw Part Number B520-298 Retaining screw for all models above Price Each $0.80 Price Book 8 320 5-Pin Cylinder Retaining Screw Location Universal Housing (steel) 178.00 5-Pin Cylinder Retaining Screw Location Cylinders & Housings, S200-Series (For Locks after Feb 26, 2008) Description Universal Housing (steel) Effective April 4, 2020 • Rev. 04/20 6-Pin Cylinder Retaining Screw Location Universal Housing (steel) 6-Pin Cylinder Re B250, H, S200-Series Full Size Interchangeable Core Deadbolts • CYLINDERS CYLINDERS / KEYS / AUXILIARY Low, 10-32 Bolts B250, H and S200-Series Interchangeable Core Cylinders Part Number Outside 22-061 B250, H, S200 Housing Less Core Inside 22-062 Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores and cylinders only. Series Core Mechanism Side Price Each $72.00 Cylinders S200-Series (For Locks after Feb 26, 2008) Part Price Number Each Housing Less Core S306-135 $74.30 Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores and cylinders only. Description CYL-21 10-32 Bolts, Angled Driver 1/4-28 Bolts Miscellaneous Parts for B250 Series IC Cylinders Miscellaneous S200-Series (For Locks after Feb 26, 2008) Description Collar (Trim ring) Security insert for collar Driver Cotter Pin (order in multiples of 100) Tailpiece (IC) Tailpiece Washer Price Each $9.90 11.50 5.50 0.56 2.80 2.80 0.84 CL-Series Part Number 36-086* B520-541 B600-029 B600-032 B600-041 B520-685 B600-071 Price Each $9.90 5.50 0.58 11.50 Keys Part Description Number 36-086* Collar (Trim ring) B520-235 Driver B520-240 Waldes retainer (order in multiples of 100) B520-541 Security insert for collar * Specify finish: 605, 609, 612, 613, 625, 626. For cores, see CYL-42 Price Book 8 Effective April 4, 2020 • Rev. 04/20 321 B250, H, S200-Series Collars and Tailpieces CYLINDERS / KEYS / AUXILIARY CYLINDERS • Deadbolts Collars (Trim Rings and Security Inserts), B250, H, and S200-Series Part Number 02-037 36-066 36-067 Specify Finish • • • Description MD160 Series decorative cylinder rose, specify design Trim ring, 1/8" Trim ring, 7/16" Price Each $10.80 9.40 13.20 36-068 Security insert, 1/8" 5.90 36-069 Security insert, 7/16" 11.20 Security insert pack, 36-068 1/8" and 36-069 7/16" 17.30 • • Trim ring and security insert pack, 36-066 and 36-068 1/8" Trim ring and security insert pack, 36-067 and 36-069 7/16" 15.00 24.10 Security insert, 1" for interchangeable core 11.50 • • Trim ring and security insert pack, B520-541 and 36-086 1" Trim ring, 1" 27.90 9.90 36-070 36-071 36-072 B520-541 36-085 36-086 Lazy Tailpieces, B250, H, and S200-Series Description Price Each Part Number Description Price Each Double cylinder 0.810" 2.40 B220-036 Double cylinder 1.375" B202-369 Double cylinder 0.685" 2.40 B502-999 S200 2.500" $7.40 3.80 B202-370 Double cylinder 0.550" 2.40 B520-236 Double cylinder 1.325" 5.50 B202-453 Double cylinder 0.622" 8.30 B520-237 Double cylinder 1.100" 5.50 B202-557 Single cylinder 1.850" 2.40 B520-242 Single cylinder 2.200" 12.60 B202-558 Single cylinder 2.000" 2.40 B520-243 Single cylinder 2.600" 12.60 B202-580 Double cylinder 0.450" 2.70 B590-443 Single cylinder 1.470" 2.90 B202-957 Single cylinder 1.410" 2.70 E205-204 Single cylinder 3" breakoff 9.00 B220-032 Double cylinder 1.031" 2.70 Keys CYL-22 Part Number B202-269 Drivers for Lazy Tailpieces Description Classic Non Modular Modular Cylinder All Keyway Families (Classic, Everest, Everest 29 & Primus) CL-Series Part Number B520-375 B502-949 Price Book 8 322 Effective April 4, 2020 • Rev. 04/20 Price Each $2.90 1.70 B250, H, S200-Series Tailpiece and Collar Application Chart Deadbolts • CYLINDERS Model/Function Cylinder 5-Pin 6-Pin B250 IC 6-Pin 5-Pin H except discontinued H160 B202-558 7/16" + 1/8" 1 11/16" – 2 1/4" B202-558 7/16" over 2 1/4" – 2 9/16" B202-558 1/8" 1 5/16" – 1 3/8" B202-558 Two 1/8" & One 7/16" 1 7/16" – 1 15/16" B202-558 7/16" + 1/8" 2" – 2 3/8" B202-558 7/16" over 2 3/8" – 2 9/16" E205-204 7/16" 2 5/8" – 2 3/4" B202-558 1/8" 1 5/16" – 1 1/2" B520-242 1" + 1/8" over 1 1/2" – 2 1/8" B520-242 1" over 2 1/8" – 2 3/8" B520-243 over 2 3/8" – 2 5/8" B520-243 over 2 5/8" – 3 1/8" B520-242 7/16" 1 5/16" – 1 3/8" B202-370 7/16" + 1/8" 1 1/2" – 1 5/8" B202-269 1 11/16" – 1 15/16" B202-580 2" – 2 3/8" 6-Pin 6-Pin IC 7/16" + 1/8" 7/16" B202-269 2 7/16" – 2 11/16" B202-453 2 3/4" – 2 7/8" B202-269 1 3/16" – 1 3/8" B202-269 Two 1/8" 1 7/16" – 1 1/2" B202-370 7/16" + 1/8" 1 9/16" – 1 15/16" B202-369 2" – 2 3/16" B202-370 2 1/4" – 2 11/16" B202-269 1/8" 7/16" 2 3/4" – 2 13/16" B202-370 2 7/8" – 3 1/8" B202-369 1 5/16" – 1 5/8" B520-237 1" + 1/8" 1/8" over 1 5/8" – 1 7/8" B520-237 1" over 1 7/8" – 2 1/8" B520-236 1" over 2 1/8" – 2 3/8" B520-236 7/16" + 1/8" over 2 5/8" – 3 1/8" B520-236 7/16" 1 3/8" 7/16" + 1/8" 1 3/4" B202-558 1 3/8" IC S200 (for locks ordered before February 2008) 1 5/16" – 1 5/8" CL-Series IC Collar(s) (See CYL-20) Keys B252 Tailpiece (See CYL-20) CYL-23 5-Pin Door Thickness CYLINDERS / KEYS / AUXILIARY Tailpieces and Collars Application Chart, B250, H, and S200-Series (Continued) 1 3/4" 7/16" 7/16" + two 1/8" 7/16" + 1/8" 1 3/8" B520-242 1 3/4" 1 3/8" – 1 5/8" 1 5/8" – 2" B502-999 1" + 1/8" 1" 1" + 1/8" 1" 1 3/8" – 1 5/8" B520-242 1" + 1/8" 1 5/8" – 2" B520-243 1" Price Book 8 Effective April 4, 2020 • Rev. 04/20 323 B600/700/800-Series Non-IC Reference Table CYLINDERS / KEYS / AUXILIARY CYLINDERS • Deadbolts Single Cylinder B600/700/800-Series Cylinder Reference Table Cylinder Mechanism B600-Series Standard Everest SL (B/R keyways only) CYL-24 Function B600-Series Standard 22-643 65.00 65.00 2" – 2 1/2" $83.00 91-031 22-085 65.00 1 3/8" – 2" 91-028 B662 22-086 65.00 2" – 2 1/2" 91-029 B760, B763 1 3/8" – 2 1/2" CL-Series 22-642 B661, B664 Everest SL (B/R keyways only) B700 -Series Primus $65.00 91-030 B600-Series Standard B600-Series Standard Price Each Open Restricted 91-032 1 3/8" – 2" Everest SL (B/R keyways only) Everest SL (B/R keyways only) Door Cylinder Less Thickness Housing 1 3/8" – 2 1/2" 22-644 B660, B663 B600-Series Standard Everest SL (B/R keyways only) Keys Double Cylinder 20-744 1 3/8" – 2" 20-742 2" – 2 1/2" 20-743 1 3/8" – 2" 20-745 2" – 2 1/2" 20-746 B761, B764 145.00 B762 B700 -Series Primus-XP Everest SL Primus XP (B/R keyways only) B760-XP, B763-XP B700 -Series Primus-XP Everest SL Primus XP (B/R keyways only) B700 -Series Primus-XP Everest SL Primus XP (B/R keyways only) 145.00 145.00 145.00 1 3/8" – 2" 91-709-XP B761-XP, B764-XP 20-743-XP 145.00 145.00 2" – 2 1/2" 91-710-XP B700 -Series Primus-XP B700 -Series Primus-XP 91-711-XP 20-742-XP Everest SL Primus XP (B/R keyways only) Everest SL Primus XP (B/R keyways only) 20-744-XP 1 3/8" – 2 1/2" 20-745-XP 145.00 145.00 1 3/8" – 2" 91-712-XP 145.00 B762-XP 20-746-XP 145.00 2" – 2 1/2" 91-713-XP 145.00 Price Book 8 324 Keyway Type Plug Shell Tailpiece (See CYL-53) (See CYL-55) (See CYL-26) Classic 33-167 Everest & Everest 29 33-186 Everest B & Everest 29 R 33-213 A508-660 Classic Everest & Everest 29 33-167 33-186 A508-653 Everest B & Everest 29 R 33-213 A508-660 Classic Everest & Everest 29 33-167 33-186 A508-653 Everest B & Everest 29 R 33-213 A508-660 Classic Everest & Everest 29 33-167 33-186 A508-653 Everest B & Everest 29 R 33-213 A508-660 Classic Everest & Everest 29 33-167 33-186 A508-653 Everest B & Everest 29 R 33-213 A508-660 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 33-136 33-119 33-136 33-119 33-136 33-119 33-136 33-119 33-136 33-119 33-136 33-119 Everest B & Everest 29 R 33-214 A508-661 Classic Everest & Everest 29 33-136 33-119 A508-655 Everest B & Everest 29 R 33-214 A508-661 Classic Everest & Everest 29 33-136 33-119 A508-655 Everest B & Everest 29 R 33-214 A508-661 Classic Everest & Everest 29 33-136 33-119 A508-655 Everest B & Everest 29 R 33-214 A508-661 Classic Everest & Everest 29 33-136 33-119 A508-655 Everest B & Everest 29 R 33-214 A508-661 Effective April 4, 2020 • Rev. 04/20 A508-653 B610-084 B610-082 B610-083 B610-085 B610-086 B610-084 B610-082 A508-655 B610-083 B610-085 B610-086 A508-655 B610-084 B610-082 B610-083 B610-085 B610-086 B600/700/800-Series Non-IC Reference Table Deadbolts • CYLINDERS Cylinder Mechanism Function Door Thickness Cylinder Less Housing B860, B863 1 3/8" – 2 1/2" 20-544 1 3/8" – 2" Price Each Open Restricted 20-542 B861, B864 B800-Series Primus UL437 2" – 2 1/2" 20-543 1 3/8" – 2" 20-545 2" – 2 1/2" 20-546 B862 B860-XP, B863-XP 20-544-XP 1 3/8" – 2" 20-542-XP 2" – 2 1/2" 20-543-XP 1 3/8" – 2" 20-545-XP 2" – 2 1/2" 20-546-XP 1 3/8" - 2 1/2" 91-536-XP 1 3/8" - 2" 91-534-XP 2" - 2 1/2" 91-535-XP 1 3/8" - 2" 2" - 2 1/2" B861-XP, B864-XP B862-XP B860,B863 B800-Series Everest SL Primus-XP UL 437 B861, B864 B862 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Classic 33-154 Everest & Everest 29 33-221 Shell (See CYL-55) Tailpiece (See CYL-26) B610-084 B610-082 A508-655 B610-083 B610-085 B610-086 B610-084 B610-082 A508-655 B610-083 B610-085 B610-086 NA NA NA NA NA NA NA NA NA 91-532-XP NA NA NA 91-533-XP NA NA NA $179.00 Everest B & Everest 29 R only Keys 1 3/8" – 2 1/2" Plug (See CYL-53) CYL-25 B800-Series Primus-XP UL437 $179.00 Keyway Type CYLINDERS / KEYS / AUXILIARY B600/700/800-Series Cylinder Reference Table (continued) CL-Series Price Book 8 Effective April 4, 2020 • Rev. 04/20 325 B600/700/800-Series Non-IC Cylinders, Parts and Tailpieces CYLINDERS / KEYS / AUXILIARY CYLINDERS • Deadbolts Miscellaneous Parts, B600/700/800-Series Part Description Number B520-298 Cylinder retaining screw B600-070* 7/8" Collar (trim ring) for 1 5/8" – 2 1/2" door (standard) B600-089* 1 1/8" Collar (trim ring) for 1 3/8" – 1 5/8" door B600-090 Inside housing only (for B662, B762 & B862) B600-092* Inside snap-on face plate B610-024* Dummy cylinder faceplate and outside housing B610-025* Housing, outside B610-071 Washer C603-098 Security disc (Order in multiples of 100) * Specify finish: 605, 609, 612, 613, 625 and 626. Price Each $0.80 64.20 68.10 33.50 2.90 52.90 33.50 0.84 0.40 Part Number B610-041 B610-042 B610-043 B610-044 B610-045 B610-046 B610-082 B610-083 B610-084 B610-085 B610-086 Description B680 (non-keyed) B661, B664 Classic Conventional Non Modular B661, B664 Classic Conventional thick door Non Modular B660, B663 Classic Conventional Non Modular B662 Classic Conventional Non Modular B662 Classic Conventional thick door Non Modular B661, B664 Classic Conventional Modular B661, B664 Classic Conventional thick door Modular B660, B663 Classic Conventional Modular B662 Classic Conventional Modular B662 Classic Conventional thick door Modular CL-Series Keys CYL-26 Tailpiece and Retainer Packs, B600/700/800-Series Price Book 8 326 Effective April 4, 2020 • Rev. 04/20 Price Each $14.80 7.60 7.60 7.60 10.20 10.20 7.20 8.70 14.00 14.00 14.00 B600/700/800-Series IC Housings and Parts Deadbolts • CYLINDERS CYLINDERS / KEYS / AUXILIARY Full Size IC 1/4-28 Bolts, Angled Driver Small Format IC 1/4-28 Bolts B600/700-Series IC Housings Less Core Cylinder Type Small Format Interchangeable Core Part Number* B610-203*† B610-205 † B610-028 B610-204*† B610-281 Price Each CYL-27 Full Size Interchangeable Core Housing Outside B660, B661, B663 Outside B662 Inside Outside Inside $63.70 60.90 59.10 * Specify finish: 605, 609, 612, 613, 625, 626. † For deadbolts purchased before 10/01/2012, also requires firecups B520-657. Miscellaneous Parts for B600/700-Series IC Cylinders Price Each $2.50 8.60 2.50 2.80 68.10 0.58 5.50 46.70 17.40 3.20 0.38 9.80 10.40 15.10 14.80 Keys CL-Series Part Description Number B202-370 Tailpiece, B662BD B202-453 Tailpiece, B662BD thick door B202-557 Tailpiece, B660BD B220-032 Tailpiece, B661BD B600-089* 1 1/8" Collar, B600 all IC models B520-240 Waldes retaining ring B662J (order in multiples of 100) B600-029 Driver, B660/662J/663J B610-032 Cotter pin for tailpiece, B660/662J/663J (1 = pack of 50) B600-106 Driver, SFIC B600-107 Throw member for SFIC models B600-108 Waldes retaining ring B660/662BD (order in multiples of 100) B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks B610-040 Tailpiece and cotter pin, B662J B610-041 Tailpiece and cotter pin, B660J, B661J, B663J * Specify finish: 605, 609, 612, 613, 625, 626. For pins, springs, etc., see CYL-50. Price Book 8 Effective April 4, 2020 • Rev. 04/20 327 Conventional Cylinders for L-Series Locks, Exit Devices CYLINDERS / KEYS / AUXILIARY CYLINDERS • Mortise Cylinder Only Mortise Cylinders Schlage L-Series (except L9060 outside) Cam L583-474 L583-274 For 1 1⁵⁄₈" 1/8", For cyl. housinglength sizes: 1¹⁄₈, 1³⁄₈, 1 3/8", 1 5/8" X Y Dim. X = .261 Y = .644 CYL-28 -274 ousing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" X X Y Description L583-275 For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" Cylinder Only: X LY& N Escutcheons Dim. X = .261 Y = .644 L583-475 L583-275 For cyl. length 1 1/4", For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" 1 1/2", 1 3/4" Dim. X = .261 Y = .644 Cylinder With Compression Ring & Spring: Rose Trim Dim. X = .261 Y = .644 L583-800 Cylinder Mechanism Complete Cylinder Standard Standard - LM9280, LM9380 and LMV9380 Primus Controlled Access Primus XP Controlled Access Primus UL437 Primus XP UL437 Hotel Function (Standard) Standard Standard - LM9280, LM9380 and LMV9380 Primus Controlled Access Primus XP Controlled Access Primus UL437 Primus XP UL437 Primus Lockout Primus XP Lockout Primus UL437 Lockout Primus XP UL437 Lockout Hotel Function (Standard) 30-021 30-019I 20-793 20-793-XP 20-593 20-593-XP 30-022I 30-001 30-000I 20-787 20-787-XP 20-587 20-587-XP 20-717 20-717-XP 20-517 20-517-XP 30-002I Everest SL(B/R keyways only) 91-062 1-1/8" - LM9280, LM9380 and LMV9380 1-1/8" - LM9280, LM9380 and LMV9380 91-129I 91-130I Everest SL Primus XP (B/R keyways only) 91-757-XP Everest SL UL437-XP 91-557-XP Finishes Available: 605, 606, 609, 612, 613, 619, 622, 625, 626, 629, 630, 643e Price Each Open Restricted $75.00 122.00 $93.00 159.00 159.00 193.00 193.00 86.00 125.00 140.00 104.00 169.00 169.00 202.00 202.00 228.00 228.00 245.00 245.00 143.00 For cylinder length 1- 1/8" Keys For modular SL cylinders introduced May 2016 CL-Series Y Prices apply to 1 1/8" - 1 3/8", additional charges for cylinders 1 1/2" or greater. Cylinder with Compression Ring & Spring L583-801 104.00 For cylinder length 1 -1/4" Cylinder With Compression Ring and Spring: Rose Trim Schlage L9060 Outside and Other Straight Cam Applications Standard L583-476 Primus Controlled Access Cylinder with compression For cyl. length 1 1/8", Primus XP Controlled Access spring: 1 3/8", 1 5/8" L & N Escutcheons Primus UL437 X Y DIM X = 0.35” DIM Y = 0.72” L583-477 For cyl. length 1 1/4", 1 1/2", 1X 3/4" Y DIM X = 0.35” DIM Y = 0.72” Cylinder With Compression Ring & Spring: Rose Trim Cylinder with Comp. Ring & 1/8" Blocking Ring: Adams Rite 2331 Primus XP UL437 Standard Primus Controlled Access Primus XP Controlled Access Primus UL437 Primus XP UL437 Primus Lockout Primus XP Lockout Primus UL437 Lockout Primus XP UL437 Lockout Standard (available in 1-1/8" only) 26-021 20-701 20-701-XP 20-501 20-501-XP 20-001 20-700 20-700-XP 20-500 20-500-XP 20-715 20-715-XP 20-515 20-515-XP 20-002 164.00 198.00 $75.00 86.00 96.00 159.00 159.00 193.00 193.00 169.00 169.00 202.00 202.00 228.00 228.00 245.00 245.00 $93.00 104.00 114.00 L583-802 For cylinder length 1- 1/8" For modular SL cylinders introduced May 2016 Everest SL (B/R keyways only) 91-051 103.00 Cylinder With Compression Ring and Spring: Rose Trim Everest SL Primus XP (B/R keyways only) 91-751-XP 164.00 L583-803 For cylinder length 1 -1/4" Note: Everest SL UL437-XP 91-561-XP 198.00 For inverted cams for dogging cylinders, add XQ11-949 ® ® ® Also for Schlage K-Series (discontinued), Falcon non-deadbolt functions, Adams Rite 2331 deadlocks,Baldwin mortise locks, Corbin Russwin® ML2242 inside and ML2255. Price Book 8 328 Effective April 4, 2020 • Rev. 04/20 Conventional Cylinders for Adams Rite Locks CYLINDERS / KEYS / AUXILIARY Mortise Cylinders (cont’d) Price Each Cam Description Cylinder Mechanism Complete Cylinder Open Restricted Adams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 Series S 4500 & 4700, Lori 4500, n DL3000 Y Mortise • CYLINDERS Prices apply to 1 1/8" - 1 3/8", additional charges for cylinders 1 1/2" or greater. X L583-446 For cyl. length 1 1/8", L583-4461 3/8", 1 5/8" Adams Rite MS 4500 & 4700, Lori 4500, Corbin Russwin DL3000 X Y im. X = .19 Y = .57 Cylinder Dim. X = .19 Y = .57 L583-447 For cyl. length 1 1/4", L583-447 1 1/2", 1 3/4" Adams Rite MS 4500 & 4700, Lori 4500, Corbin Russwin DL3000 X Y Cylinder With Adams Rite MS 4500 & 4700, Lori 4500, Corbin Russwin 3/8" Blocking Ring DL3000 X X Cylinder With Compression Dim. X = .187 Y = .562 $75.00 $93.00 Standard 20-013 86.00 104.00 Primus Controlled Access 20-706 168.00 Primus XP Controlled Access 20-706-XP 168.00 Primus UL437 20-506 201.00 Primus XP UL437 20-506-XP 201.00 Primus Lockout 20-718 207.00 Primus XP Lockout 20-718-XP 207.00 Primus UL437 Lockout 20-518 244.00 Primus XP UL437 Lockout 20-518-XP 244.00 Standard 26-073 Primus Controlled Access 20-708 158.00 Primus XP Controlled Access 20-708-XP 158.00 Primus UL437 20-508 201.00 Primus XP UL437 20-508-XP 201.00 CYL-29 Dim. X = .19 Y = .57 B502-944 Y 26-072 L583-446 Y Dim. X = .19 Y = .57 Standard Ring and Spring Keys Cylinders with these cams include set screw pack B220-050 for Adams Rite locks. Adams Rite 4070 Series B520-743 For cyl. length 1 1/8", 1 3/8", 1 5/8" B520-744 Adams Rite 4070 Y X Dim. X = .33 Y = .63 Dim. X = .33 Y = .63 B520-744 Adams 4070 1 1/4", For cyl.Rite length 1 1/2", 1 3/4" B520-743 X m. X = .33 Y = .63 Y $93.00 X Cylinder with compression spring 4070 $75.00 B520-743 CL-Series Y Adams Rite 4070 X Dim. X = .33 Y = .63 Notes: Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $46.70. See Special Cylinders for 2" - 5" long cylinders. 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness. See page CYL-36 for required dimension. Primus Lockout cylinders do not use the modular design see the cams for non-modular table on page 313 for the required cams SL Cylinders available in 1 1/8" and 1 1/4" lengths only For keying in the field, order 10-piece Bulk Pack Cylinders. Cylinders are sub-assembled to save time! See CYL-5 Price Book 8 Effective April 4, 2020 • Rev. 04/20 329 Adams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 Series CYLINDERS / KEYS / AUXILIARY CYLINDERS • Mortise Adams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 Series Cam L583-773 Description Cylinder Mechanism Complete Cylinder Price Each Restricted For cylinder length 1-1/8" Everest SL (B/R keyways only) 91-060 $103.00 Everest SL Primus XP (B/R keyways only) 91-758-XP 163.00 Everest SL UL437-XP 91-558-XP 195.00 91-061 $104.00 Everest SL Primus XP (B/R keyways only) 91-759-XP 163.00 Everest SL UL437-XP 91-559-XP 186.00 L583-774 For cylinder length 1-1/4" For modular SL cylinders introduced May 2016 CYL-30 Cylinder with 3/8" Blocking Ring Adams Rite 4070 Series Modular Cams Keys B520-788 For cylinder length 1-1/8" Everest SL (B/R keyways only) B520-789 CL-Series For cylinder length 1-1/4" For modular SL cylinders introduced May 2016 Cylinder Only Price Book 8 330 Effective April 4, 2020 • Rev. 04/20 Concealed Shell L-Series Mortise • CYLINDERS Cam Schlage L-Series (except L9060 outside) L583-153 L583-254 Classic Standard Y Description Everest & Primus X X Y Cylinder Only: L Escutcheon Dim. X = .252 Y = .638 Schlage L9060 Outside B502-948 B502-191 Classic Standard Y $114.00 30-004 Primus Controlled Access 20-789 190.00 Primus XP Controlled Access 20-789-XP 190.00 Primus UL437 20-589 225.00 Primus XP UL437 20-589-XP 225.00 Hotel Function (Conventional) 30-005* 146.00 Standard 26-023 Primus Controlled Acess 24-767 190.00 Primus Controlled Acess-XP 24-767-XP 190.00 Primus UL437 24-567 225.00 Primus XP UL437 24-567-XP 225.00 $96.00 $114.00 X Cylinder Only: L Escutcheon Dim. X = .338 Y = .71 $96.00 Standard Dim. X = .338 Y = .71 Keys Y X Everest & Primus Finishes Available: 606, 626 Price Each Open Restricted CYL-31 Dim. X = .252 Y = .638 Cylinder Mechanism Complete Cylinder CYLINDERS / KEYS / AUXILIARY Concealed Shell Mortise Cylinders CL-Series * Specify hand for hotel function cylinders. Not available in Primus. Emergency keys must be ordered separately. Notes: Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $46.70. Extended lengths are available. See Special Cylinders. Everest hotel function cylinders are available 1 1/8", 1 1/4" and 1 3/8" only. 1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness. See page CYL-36 for required dimension. Finishes: 606 and 626. Cams for Competitors’ Cylinders in Schlage Locks* L583-197 Sargent and Yale non-IC (was XL11-758) L583-198 Corbin Russwin non-IC (was XL11-545) XL11-895 Corbin Russwin * Sold separately only. Price Book 8 Effective April 4, 2020 • Rev. 04/20 331 Non-IC Cams and Dummy Cylinder CYLINDERS / KEYS / AUXILIARY CYLINDERS • Mortise Cams Non Modular Cylinders Part Description Number B502-191 L9060 Straight Classic Standard B502-292 Adams Rite MS Classic Standard B502-380 Adams Rite 4070 Classic Standard B502-944 Adams Rite MS Everest® & Primus® B502-945 Adams Rite 4070 Everest & Primus B502-948 L9060 Straight Everest & Primus L583-153 L-Series Everest & Primus L583-197 L-Series for Sargent and Yale non-IC cylinders L583-198 L-Series for Corbin Russwin non-IC cylinders L583-254 L-Series Classic Standard XQ11-935* Inverted straight Everest and Primus (dogging) XL11-895 L-Series for Corbin Russwin B520-254 Cam for Falcon Exit Trim * Subject to Specials discounting and extended factory lead time. Price Each $3.60 3.60 12.70 3.60 12.70 3.60 3.60 12.70 12.70 3.60 5.70 12.70 12.70 CL-Series Keys CYL-32 Cams - Modular Cylinders Part Number L583-476 L583-477 B520-743 B520-744 L583-446 L583-447 L583-474 L583-475 Description L9060 for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" L9060 for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" Cam, Cylinder Mortise. A/R 4070 for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" Cam, Cylinder Mortise. A/R 4070 for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" Adams Rite MS for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" Adams Rite MS for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" L-Series for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" L-Series for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" Cam Screws For Non Modular Cylinders Part Number B502-468 B502-942 B502-943 B590-295 Price Each (Order in multiples of 100) $0.36 0.50 0.68 0.50 Description Classic Standard up to 1 3/8" Everest & Primus up to 1 3/8" Everest & Primus over 1 3/8" Classic Standard over 1 3/8" Cam Screws For Modular Cylinders Part Description Number B520-690 Camscrew, (5-40 x 1/2") for 1-1/8" & 1-1/4" cylinder length B520-691 Camscrew, (5-40 x 3/4") for 1-3/8" & 1-1/2" cylinder length B520-692 Camscrew, (5-40 x 1") for 1-5/8" & 1-3/4" cylinder length Modular Cylinder Housing Screws B520-693 Modular Housing Screw (8-32 x 7/8") B590-295 Classic Standard over 1 3/8" Dummy Cylinder Part Number 38-070 Note: Description Length Dummy cylinder only, less ring and cam 1 1/8", 1 1/4", 1 3/8", 1 1/2" 1) For thumbturn cylinders see page L-36. Price Book 8 332 Price Each $3.20 3.20 12.70 12.70 3.20 3.20 3.20 3.20 Effective April 4, 2020 • Rev. 04/20 Price Each (Order in multiples of 100) $0.24 0.46 0.62 $1.80 0.50 Price Each $63.00 CYLINDERS • Mortise Full Size Interchangeable Core Cam Description Schlage L-Series (except L9060 outside) L583-255 Housing Only Dim. X = .252 Y = .638 Cylinder With Compression Ring, Spring &3/8" Blocking Ring Rose Trim X Dim. X = .338 Y = .778 Cylinder With Compression Ring & Spring: L & N Escutcheons Cylinder with compression ring and spring 30-016 30-008* 91-163 20-798 20-798-XP 91-863-XP 30-010** 30-007 30-138* 91-169 20-776 20-776-XP 91-869-XP 30-140** 30-137 Housing Less Core Standard Core Everest SL Core (B/R keyways only) Primus Core Primus XP Core Everest SL Primus XP Core (B/R keyways only) Primus Core 30-032 30-030* 91-165 20-782 20-782-XP 91-865-XP 20-783 Primus XP Core 20-783-XP 262.00 Housing Less Core - Housing Only 26-102 $62.00 FSIC housing and core (specify handing) 26-101* 149.00 167.00 FSIC housing less logo core (specify handing) 26-103 149.00 167.00 Von Duprin, Monarch and Other Straight Cam Applications K510-730 Housing Only Housing Less Core Standard Core X Everest SL Core (B/R keyways only) Y Cylinder With Compression Primus Core Ring & Spring Primus XP Core Everest SL Primus XP Core (B/R keyways only) Dim. X = .338 Housing Only with Housing Less Core Y = .71 compression ring and spring Also for Schlage K-Series (discontinued), Standard Core Falcon® non-deadbolt functions, Von Duprin & Monarch exit devices, Adams Everest SL Core (B/R keyways only) Rite® 2331 deadlocks, Baldwin® mortise Primus Core Cylinder With Compression locks, Corbin Russwin® ML2242 inside and ML2255, Best 30H latch function. Ring, Spring & 3/8" Blocking Primus XP Core Ring Everest SL Primus XP Core (B/R keyways only) For dogging cylinders for Von Duprin exit devices, specify complete cylinder (with core) and XQ11-948.**** Available at no additional charge. Housing Less Core 20-059 26-091* 91-171 20-763 20-763-XP 91-871-XP 144.00 144.00 144.00 26-094 $64.00 162.00 162.00 245.00 245.00 245.00 75.00 26-064 20-061* 91-173 20-771 20-771-XP 91-873-XP $64.00 162.00 162.00 245.00 245.00 245.00 262.00 CL-Series Cylinder With Compression Ring, Spring & 1/2" Blocking Ring Rose Trim Dim. X = .338LM9280 and LM9380/LMV9380 LM, LMV-Series Y = .778 L583-509 L583-589 (RH) (LH) $64.00 162.00 162.00 245.00 245.00 245.00 146.00 72.00 165.00 183.00 183.00 262.00 262.00 262.00 165.00 87.00 Housing Less Core Standard Core Everest SL Core (B/R keyways only) Primus® Core Primus® XP Core Everest SL Primus XP Core (B/R keyways only) Faculty Res. Function Core Housing Less Core Standard Core Everest SL Core (B/R keyways only) Primus Core Primus XP Core Everest SL Primus XP Core (B/R keyways only) Faculty Res. Function Core Housing Less Core Keys X Y Housing Only Complete Cylinder CYL-33 Cylinder With Compression Ring & Spring: L & N Escutcheons X Y Schlage L9060 Outside K510-680 Y Cylinder Mechanism Finishes Available: 605, 606, 609, 612, 613, 619, 622, 625, 626, 643e Price Each Open Restricted 160.00 178.00 178.00 262.00 262.00 262.00 86.00 * To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details. ** Specify hand for hotel function cylinders. Not available in Primus. Emergency key must be ordered separately. *** For this configuration with standard full size interchangeable core, order 30-030 cylinder and 36-082-050 blocking ring. **** Extended factory lead time. Price Book 8 Effective April 4, 2020 • Rev. 04/20 CYLINDERS / KEYS / AUXILIARY Full Size Interchangeable Core 333 Full Size Interchangeable Core, Cams and Parts CYLINDERS / KEYS / AUXILIARY Mortise • CYLINDERS Full Size Interchangeable Core (cont’d) Price Each Cam Description Cylinder Mechanism Complete Cylinder Open Restricted Adams Rite MS, 4500, 4700 Series K510-711 X Y Cylinder Only Housing Less Core 20-060 Cylinder With Compression Ring & Spring Standard Core 26-098* Cylinder With Compression Ring, Spring 3/16" and 3/8" Blocking Rings Dim. X = .187 Y = .562 Everest 29 SL Core 91-172 Standard Core 20-062* Everest SL Core (B/R keyways only) 91-174 $64.00 149.00 167.00 175.00 196.00 193.00 Primus Core 20-766 270.00 Primus® XP Core 20-766-XP 270.00 Everest SL Primus XP Core (B/R keyways only) 91-874-XP 270.00 ® 167.00 Cylinders with this cam include set screw pack B220-050 for Adams Rite locks. Adams Rite 4070 Series CYL-34 B520-378 X $64.00 Cylinder Only Housing Less Core 20-090 Cylinder With Compression Ring, Spring 3/16" and 3/8" Blocking Rings Standard Core 20-091* Everest SL Core (B/R keyways only) 91-175 Primus Core 20-722 270.00 Primus XP Core 20-722-XP 270.00 Everest SL Primus XP Core (B/R keyways only) 91-875-XP 270.00 Y Keys Dim. X = .323 Y = .627 175.00 * CL-Series Note: To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details. 2 1/4" through 5" cylinders are available. See Special Cylinders CYL-51 for more information. Interchangeable Core Cams Part Number B520-378 K510-680 K510-711 K510-730 L583-255 B520-698 K510-730 Price Each $12.70 3.60 3.60 3.60 3.60 12.80 3.50 Description Adams Rite 4070 L9060 Outside Adams Rite MS Straight cam L-Series (except L9060 outside) Falcon Series MA Mortise Lock Cam for Falcon Exit Device Trims Other Full Size IC Mortise Cylinder Parts Part Price Description Number Each L583-200 Cam screw (order in multiples of 100) $0.44 C604-334** Driver, universal 6.50 K510-474 Friction washer 2.80 ** Will upgrade housings manufactured before March 1992 to accept Everest and Primus cores. For plugs, shells, pins, springs, etc., see CYL-51, CYL-52, CYL-53, CYL-55. Price Book 8 334 Effective April 4, 2020 • Rev. 04/20 193.00 193.00 CYLINDERS • Mortise Small Format Interchangeable Core Cam Description Cylinder Mechanism Complete Cylinder CYLINDERS / KEYS / AUXILIARY Small Format Interchangeable Core Price Each Schlage L-Series (except L9060 outside) L583-255 X Y Cylinder With Compression Ring & Spring: and 1/4" Blocking Ring: Rose Trim Everest & Everest 29 Combinated Core (B/R keyways only) 80-308 $161.00 Disposable 80-115 72.00 Keyed 80-138 108.00 Housing less Core 80-108 72.00 Everest & Everest 29 Combinated Core (B/R keyways only) 80-301 Construction Core 166.00 Disposable 80-109 81.00 Keyed 80-131 122.00 Housing less Core 80-101 81.00 Everest & Everest 29 Combinated Core (B/R keyways only) 80-304 $161.00 Construction Core CYL-35 Dim. X = .252 Y = .638 Cylinder With Compression Ring & Spring: L & N Escutcheons Schlage L9060 Outside K510-680 Cylinder With Compression Ring & Spring: L & N Escutcheons* Construction Core Disposable 80-112 72.00 Keyed 80-134 122.00 80-104 72.00 26-106 161.00 Housing less Core Dim. X = .338 Y = .778 Keys X Y L583-509 L583-589 (RH) (LH) Everest & Everest 29 Cylinder with Compression Ring & Spring Disposable 26-105 76.00 Keyed 26-107 113.00 Housing less Core 26-104 73.00 Everest & Everest 29 Combinated Core (B/R keyways only) 80-302 173.00 Construction Core CL-Series LM/LMV-Series (LM9280/9380 & LMV9380) Von Duprin, Monarch and Other Straight Cam Applications K510-730 X Construction Core Y Dim. X = .338 Y = .71 Also for Schlage K-Series (discontinued), Falcon® non-deadbolt functions, Von Duprin® exit devices, Adams Rite® 2331 deadlocks, Baldwin® mortise locks, Corbin Russwin® ML2242 inside and ML2255. To order dogging cylinders for Von Duprin® and Monarch® exit devices, specify complete cylinder (with core) and XQ11-948**. Available at no additional charge. Disposable 80-110 81.00 Keyed 80-132 122.00 80-102 81.00 Cylinder With Compression Ring, Spring & 1/4" Blocking Ring Housing less Core * For rose trim also order 36-082-050 blocking ring. ** Extended factory lead time. Price Book 8 Effective April 4, 2020 • Rev. 04/20 335 Small Format Interchangeable Core, Cams and Parts CYLINDERS / KEYS / AUXILIARY Mortise • CYLINDERS Small Format Interchangeable Core (cont’d) Price Each Cam Description Cylinder Mechanism Complete Cylinder Everest & Everest 29 Combinated Core (B/R keyways only) 80-303 K510-711 X Y Construction Core Cylinder With 7/16" Blocking Ring Dim. X = .187 Y = .562 Disposable X 80-111 81.00 80-133 122.00 Housing less Core 80-103 81.00 Everest & Everest 29 Combinated Core (B/R keyways only) 80-305 $173.00 Keyed Y CYL-36 Construction Core Cylinder With Compression Ring, Spring & 1/4" Blocking Ring Dim. X = .323 Y = .627 Disposable 80-113 81.00 Keyed 80-135 122.00 80-105 81.00 Housing less Core Notes: Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626. All SFIC cylinders with Adams Rite MS or 4070 cams are furnished with set screw pack B220-050. Keys $173.00 Adams Rite 4070 Series B520-378 CL-Series Open Adams Rite MS, 4500 and 4700-Series Cylinder and Blocking Ring combinations are based on 1-3/4" door thickness. Interchangeable Core Cams Part Number B520-378 K510-680 K510-711 K510-730 L583-255 Description Adams Rite 4070 L9060 Outside Adams Rite MS Straight cam L-Series (except L9060 outside) Price Each $12.70 3.60 3.60 3.60 3.60 Other Small Format IC Mortise Cylinder Parts Part Number B520-484 B520-483 B220-050 Description Cam screw (order in multiples of 100) Throw member (driver) Adams Rite set screw pack Price Each $0.42 6.50 2.80 For pins, springs, etc., see CYL-50. Price Book 8 336 Effective April 4, 2020 • Rev. 04/20 L-Series, LV-Series Cylinder Length Reference Tables CYLINDERS • Mortise Full Face and Interchangeable Core CYLINDERS / KEYS / AUXILIARY How to Measure Mortise Cylinder Lengths, LV Concealed LENGTH LENGTH Cylinder and Length Requirements, L-Series Door Thickness 1 3/8" Function L9485 per XL11-557 L460, L464, L9460, L9464 Rose — Cylinder Dimension 30-001 118 2" 2 1/4" Escutcheon 30-021 118 114 138 112 Concealed 30-004 118 114 138 112 Rose 30-022 L Escutcheon 30-022 114 138 112 — — 118 — only 30-005 — 114 138 112 30-002 114 138 112 158 114 138 112 — Escutcheon 30-022 118 Concealed 30-005 118 114 138 112 L9496 — Rose 30-001 114 138 112 158 Rose 30-001 Escutcheon 30-001 114 — — — 30-021 — 118 114 138 Concealed 30-004 — 118 114 138 Rose 20-001 Escutcheon 20-001 114 — — — 26-021 — 118 114 138 26-023 — 118 114 138 — — — — Concealed Note: 118 CL-Series L9060 Outside L462, L463, L9462, L9463 Keys Concealed Rose L9486 L9060, L9071, L9077, L9082, L9082EL/EU*, L9457, L9462 per XL11-886, L9464, L9466, L9482 CYL-37 L9050, L9056,L9070, L9076,L9080, L9080EL/ EU, L9453, L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473,L9480 Trim 1 3/4" 118 Blocking rings and/or compression rings may be required and must be ordered separately. Dimensions for Mortise Cylinders Cylinder Length 1 1/8" 1 1/4" 1 3/8" 1 1/2" 1 5/8" 1 3/4" Dimension 118 114 138 112 158 134 Price Book 8 Effective April 4, 2020 • Rev. 04/20 337 L-Series, LV-Series Collar Reference Tables CYLINDERS / KEYS / AUXILIARY Mortise • CYLINDERS Full Size IC Cylinder Blocking Ring Requirements, L-Series, LV-Series Door Thickness 1 3/8" Function Trim 1 3/4" 2" 2 1/4" Dimension L9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453, L9456, Rose 050 037 025 025 L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473, Escutcheon 025 012 N/R N/R Rose — 037 025 025 L Escutcheon only — 012 N/R N/R N/R L9480 L9485 per XL11-557 L9486, L9496 Rose 012 N/R N/R L9060*, L9071*, L9077*, L9082*, L9457*, L9462* per XL11-886, L9466*, L9482* Rose — 050 043 031 Escutcheon 025 012 N/R N/R L460, L464, L9460, L9464 Rose 050 037 025 025 L462*, L463*, L9462*, L9463* Rose — 050 043 031 Notes: Specify blocking ring (36-082), finish and dimension. Blocking ring (36-082) must be used with compression ring (36-083). N/R = None Required. CYL-38 * 2 Blocking rings required. Small Format IC Cylinder Blocking Ring Requirements, L-Series, LV-Series Door Thickness 1 3/8" Keys Function Trim 1 3/4" 2" 2 1/4" Dimension L9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453, L9456, L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473, L9480 Rose 037 025 012 N/R Escutcheon ** N/R N/R N/R N/R L9060*, L9071*, L9077*, l9082*, L9082EL/EU*, L9457*, L9462* per XL11-886, L9464*, L9466*, L9482* Rose — 050 037 025 Escutcheon 018 N/R N/R N/R L9496 Rose 025 012 N/R N/R L460, L464, L496, L9460, L9464 Rose 037 025 012 N/R L462*, L463*, L9462*, L9463* Rose — 050 037 025 Notes: Specify blocking ring (36-082), finish and dimension. Blocking ring (36-082) must be used with compression ring (36-083). CL-Series N/R =None Required. * ** 2 Blocking rings required. Compression ring not required for doors over 1 9/16" thick. Dimensions for Blocking Rings Blocking Ring 1/8" 3 /16" 1/4" 5/16" 3/8" 7/16" 1/2" Length Dimension 012 018 025 031 037 043 050 Blocking and Compression Rings Part Number 36-079* 36-082* 36-083 L583-195 Specify Finish • • • Description Price Each Blocking ring for use without compression ring Blocking ring for use with compression ring Compression ring and spring Compression ring spring $14.40 12.60 10.40 1.60 Price Book 8 338 Effective April 4, 2020 • Rev. 04/20 CYLINDERS Allegion Compatible Cams CYLINDERS / KEYS / AUXILIARY Allegion Compatible Cams Cams for Schlage Cylinders Conventional cylinder Not available with cylinder Interchangeable Core (Prior to July 2010) SFIC and FSIC Conventional Everest and Primus cylinder Not available with cylinder (Prior to July 2010) L583-474 L583-475 L583-255 L583-254 L583-153 Schlage L9060 O/S L583-476 L583-477 K510-680 B502-191 B502-948 Schlage K-Series (Discontinued) L583-476 L583-477 K510-730 B502-191 B502-948 Falcon M-Series Non-deadbolt functions (Discontinued) L583-476 L583-477 K510-730 B502-191 B502-948 Falcon M-Series Deadbolt functions (Discontinued) B520-738 B520-739 XB12-046 A09894-001-00* B502-907 Falcon MA-Series except MA381 function L583-638 L583-639 B520-698 N/A N/A Von Duprin mortise exit device and Von Duprin removable mullion L583-476 L583-477 K510-730 B502-191 B502-948 Von Duprin mortise exit device with dogging L583-476 L583-477 K510-730 PER XQ11-948 B502-191 B502-948 Glynn-Johnson HL-6, except 9060 O/S L583-474 L583-475 L583-255 L583-254 l581-153 Glynn-Johnson HL-6 9060 O/S L583-476 L583-477 K510-680 B502-191 B502-948 Schlage CM5500, CM5600, PRO5500, VIP5500, 650 Keyswitch L583-476 L583-477 K510-680 B502-191 B502-948 Falcon 718C Trim (Manufactured after 2/28/2011) B520-730 B520-731 B520-254 B520-295 B520-366 Falcon 24/25 exit device with trims (except 718C and 718NL) N/A N/A N/A A09897-024-00* A09897-024-00* Falcon 24/25 exit device with trims (only 718C and 718NL) Falcon #24 cam N/A N/A N/A A09894-021-00* A09894-021-00* Price CL-Series Schlage L-Series, Except L9060 O/S Keys Modular Cylinder 1 1/4", 1 1/2", 1 3/4 CYL-39 Modular Cylinder 1 1/8", 1 3/8", 1 5/8 Description * Falcon cam available through the Falcon price book. Cam Price Cam Price Cam B502-191 $3.50 K510-680 3.50 L583-474 B502-907 3.50 K510-730 3.50 L583-475 B502-948 3.50 L583-153 3.50 L583-476 B520-254 12.30 L583-254 3.50 L583-477 B520-698 12.80 L583-255 3.50 L583-638 B520-738 12.30 L583-639 B520-739 12.30 XB12-046 B520-740 OBSOLETE - USE L583-476 B520-741 OBSOLETE - USE L583-477 B520-295 12.20 $3.10 11.40 11.80 Price Book 8 Effective April 4, 2020 • Rev. 04/20 339 CYLINDERS / KEYS / AUXILIARY CYLINDERS Allegion Compatible Cams and Tailpieces Falcon Retrofit Cylinder Reference Table Side View Lock Series B611, T381 IS & W, all except 561 T, all except 381 IS & 571 CYL-40 T571 W561, knobs Keys W561, levers CL-Series M B, all except Cylinder Mechanism Complete Cylinder Standard 21-020 Primus Primus XP Primus UL437 Primus XP UL437 20-728 20-728-XP 20-528 20-528-XP Standard 24-031 Primus Primus XP Primus UL437 Primus XP UL437 24-761 24-761-XP 24-561 24-561-XP Standard 24-032 Primus Primus XP Primus UL437 Primus XP UL437 24-762 24-762-XP 24-562 24-562-XP Standard 24-033 Primus Primus XP Primus UL437 Primus XP UL437 24-763 24-763-XP 24-563 24-563-XP Standard 24-034 Primus Primus XP Primus UL437 Primus XP UL437 24-764 24-764-XP 24-564 24-564-XP Standard 24-035 Primus Primus XP Primus UL437 Primus XP UL437 24-765 24-765-XP 24-565 24-565-XP Standard 23-013 Primus Primus XP Primus UL437 Primus XP UL437 20-750 20-750-XP 20-550 20-550-XP Price Each Open Restricted $65.00 $83.00 145.00 179.00 65.00 83.00 145.00 179.00 65.00 83.00 145.00 179.00 65.00 83.00 145.00 179.00 65.00 83.00 145.00 179.00 86.00 104.00 168.00 196.00 65.00 145.00 179.00 83.00 Keyway Type Plug Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 33-137 33-138 33-136 33-119 33-154 33-221 33-137 33-138 33-136 33-119 33-154 33-221 33-137 33-138 33-136 33-119 33-154 33-221 33-137 33-138 33-136 33-119 33-154 33-221 33-137 33-138 33-136 33-119 33-154 33-221 33-137 33-138 33-136 33-119 33-154 33-221 33-137 33-138 33-136 33-119 33-154 33-221 * These part numbers represent Falcon part numbers and are available to order through Falcon. Price Book 8 340 Effective April 4, 2020 • Rev. 04/20 Shell Tailpiece/ Cam A508-652 A700-031 A508-655 A508-652 030730-001* A508-655 A508-652 030730-002* A508-655 A508-652 Q330-252* A508-655 A508-652 Q330-165* A508-655 A508-652 A508-655 See Cam chart on page CYL-38 for proper cam A508-652 C604-243 A508-655 CYLINDERS • Rim Complete Cylinders Horizontal Tailpiece (No. 2 bar) Rim Cylinders Finishes Available: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Price Each Type Conventional (non-IC) Cylinder Mechanism 20-021 Everest SL (B/R keyways only) Horizontal 91-075 Vertical 91-074 Primus Horizontal 20-710 Vertical 20-709 Horizontal 20-710-XP Vertical 20-709-XP Everest SL Primus XP (B/R keyways only) Horizontal 91-775-XP Vertical 91-774-XP Primus UL437 Horizontal 20-510 Vertical 20-509 20-510-XP Vertical 20-509-XP Horizontal 91-575-XP Vertical 91-574-XP Primus 20-716 Primus XP 20-716-XP Primus UL437 Primus XP UL437 Horizontal $82.00 $100.00 100.00 164.00 164.00 83.00 100.00 205.00 205.00 205.00 226.00 20-516 20-516-XP 244.00 CL-Series None Horizontal Restricted Keys Everest SL UL437-XP Horizontal Open CYL-41 Vertical Primus XP UL437 Thumbturn Complete 20-022 Primus XP Lockout Tailpiece Horizontal Standard XB11-979 110.00 ADA Thumbturn None Horizontal XB13-379 110.00 Notes Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626. All items include collar, mounting screws and backplate. Tailpiece orientation may be changed in the field. For Von Duprin, Monarch and most other applications, tailpiece should be horizontal. To order less logo, specify: “with K510-612 faceplate” for Conventional cylinder. Conventional (non-IC) cylinders are available for application that is thicker than 3" ( combined door & device trim thickness) over 3" thick and available with special mounting screw locations for Sargent exit devices. See Special Cylinders CYL-51. For keying in the field, order 10-piece Bulk Pack Cylinders. Cylinders are sub-assembled to save time! See CYL-5 Price Book 8 Effective April 4, 2020 • Rev. 04/20 CYLINDERS / KEYS / AUXILIARY Verticle Tailpiece (No. 1 bar) 341 CYLINDERS / KEYS / AUXILIARY Rim • CYLINDERS Parts 20-057 Rim Cylinders Finishes Available: 605 606 609 612 613 619 622, 625 626 643e Price Each Type Cylinder Mechanism CYL-42 Full Size Interchangeable Core Tailpiece Standard Core Convertible Complete 20-057* Open Restricted $149.00 $167.00 Everest SL Core (B/R keyways only) 91-170 167.00 Primus Core 20-757 221.00 Primus XP Core 20-757-XP 221.00 Everest SL Primus XP Core (B/R keyways only) 91-870-XP 221.00 20-079 64.00 Everest & Everest 29 Combinated Core 80-329** 149.00 Keyed Construction Core 80-159*** 98.00 80-116 61.00 80-129 61.00 Housing only-less core Small Format Interchangeable Core Keys Disposable Construction Core Horizontal Housing only-less core CL-Series * To order with construction core, see Keys and Keying: Full Size Construction Core Program. ** Key symbol must be specified. Everest B and Everest 29 R Families keyways are restricted. See Terms & Conditions for more information. *** Specify GRN for green or BRN for brown construction cores. A non-refundable handling charge (50-231) is assessed per core. See Keys and Keying: Small Format Construction Core Program for details. Rim Cylinder Parts Part Number Description Price Each 36-066 Collar, IC cylinders $9.40 B202-328 Screws and backplate pack 8.20 B220-001* Tailpiece & driver, full size IC 13.70 B502-200 Backplate 1.60 B502-209 Mounting screw 1.60 B502-310-604 Driver, Conventional (non-IC) cylinder 1.50 B502-899 Tailpiece, Conventional (non-IC) cylinder and SFIC housing 3.20 B520-153 Ring, cylinder, NL 9.30 B520-361* Tailpiece retainer, full size IC (order in multiples of 100) 0.38 B520-365 Driver, SFIC 8.80 B600-107 Throw member for SFIC models 3.20 * Not compatible with housings manufactured before July 1997. For replacement of older parts, order housings less core (20-079). For plugs, shells, pins, springs, etc., see CYL-50, CYL-52, CYL-53, CYL-55. Price Book 8 342 Effective April 4, 2020 • Rev. 04/20 CYLINDERS • Interchangeable Cores Full Size 23-031 CYLINDERS / KEYS / AUXILIARY 23-030 For keying in the field, order 10-piece Bulk Pack Cores. Cores are sub-assembled to save time! See CYL-5 Full Size Cores Finishes Available: 606, 626 Price Each Part Number Open Restricted Standard core 23-030 $74.00 $92.00 Standard core less logo 23-031 74.00 Everest SL Core (B/R keyways only) 91-161 92.00 92.00 Everest SL Core less logo (B/R keyways only) 91-162 92.00 Primus core 20-740 157.00 20-740-XP 157.00 Primus XP core 157.00 157.00 Everest SL Primus XP Core (B/R keyways only) 91-861-XP 157.00 Everest SL Primus XP less logo Core (B/R keyways only) 91-862-XP 157.00 Primus XP core less logo Keys 20-741 20-741-XP Primus core less logo CYL-43 Description Hotel function standard core for L9485 and L9486 30-120* 74.00 92.00 Hotel function standard core, less logo, for L9485 and L9486 30-121* 74.00 92.00 * Specify hand for hotel function cores. Emergency keys must be ordered separately. Note: Control keys must be ordered separately. CL-Series Full Size Core Parts Part Number Description Price Each C503-115 Cap pin spring (Order in multiples of 100) $0.24 C503-118 Cap (Order in multiples of 25) 1.70 C603-827 Cap pin (Order in multiples of 100) 0.28 C603-956 Actuating ring 7.30 C603-964 Actuating pin (control top pin) 0.70 C603-967 Control bottom pin (Order in multiples of 100) 0.30 23446339 Driver, FSIC, AD-Series CY, MS, MD, 993R, 993 S, 993M 5.10 For plugs, shells, pins, springs, etc., see CYL-50, CYL-52, CYL-53, CYL-55. Price Book 8 Effective April 4, 2020 • Rev. 04/20 343 Small Format (Best® Style) CYLINDERS / KEYS / AUXILIARY Interchangeable Cores • CYLINDERS 80-037 Everest® & Everest 29™ Patented Keyway Small Format Interchangeable Cores Part Number Price Each Everest combinated core, includes master keying 80-037 $88.00 Everest uncombinated core (Does not include keys, pins or springs) 80-036 56.00 Description Finishes: 606, 626 and 613 (simulated). CYL-44 80-033 Keys Best® Keyway Small Format Interchangeable Cores Part Number Price Each 7-Pin uncombinated, specify keyway 80-033 $38.00 6-Pin uncombinated, specify keyway 80-043 38.00 Description Notes: Finishes: 606 and 626. Uncombinated cores are furnished less keys, pins and springs. Factory keying is not available. CL-Series Specify keyway using B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H, JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB, TDB=TD, QB=Q. AD-Series Tailpiece for Small Format Core Chassis Lever Design CY, MS, MD All Description Tailpiece Price Each SFIC Driver 23446347 14.20 46929456 16.10 N523-091 14.20 09-774 14.20 23446347 14.10 46929456 16.10 SFIC Driver, Spacer (for 6 pins core) and Instruction sheet SFIC Driver Except ATH, 8AT SFIC Driver, Spacer (for 6 pins core) and Instruction sheet 993R, 993S, 993M SFIC Driver ATH, 8AT SFIC Driver, Spacer (for 6 pins core) and Instruction sheet For pins, springs, etc., see CYL-51. Price Book 8 344 Effective April 4, 2020 • Rev. 04/20 Corbin Russwin and Sargent Reference Table CYLINDERS • Competitive Retrofit Side View Price Each Complete Lock Series Cylinder Mechanism Open Restricted Cylinder Standard Everest SL (B/R keyways only) Primus CL3300 Primus XP Everest SL Primus XP (B/R keyways only) Primus UL437 Primus XP UL437 Standard CK4200 UT5200 (since 1963) Standard Primus Primus XP Primus UL437 Primus XP UL437 $83.00 24-022 Classic Everest & Everest 29 83.00 91-020 Everest B & Everest 29 R 33-213 A508-660 20-762 20-762-XP Classic Everest & Everest 29 33-136 33-119 A508-655 33-214 A508-661 145.00 145.00 179.00 $65.00 $83.00 83.00 145.00 145.00 179.00 179.00 $65.00 Plug Shell Tailpiece (See CYL-53) (See CYL-55) 33-137 A508-653 33-138 $83.00 145.00 179.00 91-720-XP Everest B & Everest 29 R 20-562 20-562-XP 24-139 Classic Everest & Everest 29 Classic Everest & Everest 29 33-154 33-221 33-137 33-138 A508-655 A508-653 91-027 Everest B & Everest 29 R 33-213 A508-660 20-739 20-739-XP Classic Everest & Everest 29 33-136 33-119 A508-655 91-708-XP Everest B & Everest 29 R 33-214 A508-661 Classic Everest & Everest 29 Everest B & Everest 29 R Classic Everest & Everest 29 Classic Everest & Everest 29 Classic Everest & Everest 29 33-154 33-221 NA 33-060 33-232 33-081 33-222 33-080 33-223 20-539 20-539-XP 91-508-XP 24-127 20-727 20-727-XP 20-527 20-527-XP N523-022 A301-338 A508-655 NA A201-690 A100-052 A201-690 NA None CYL-45 Everest SL (B/R keyways only) Primus CL3400 Primus XP CL3600 Everest SL Primus XP (B/R keyways only) Primus UL437 Primus XP UL437 Everest SL UL437-XP $65.00 Keyway Type CYLINDERS / KEYS / AUXILIARY Corbin Russwin® Retrofit Cylinder Reference Table Sargent® Retrofit Cylinder Reference Table Lock Series Cylinder Mechanism Standard Standard 7, 8, 9 Line Knobs Everest SL (B/R keyways only) Primus Primus XP Everest SL Primus XP (B/R keyways only) Primus UL437 Primus XP UL437 Everest SL UL437-XP Standard Everest SL (B/R keyways only) Primus 6 Line Primus XP Except B Knob Everest SL Primus XP (B/R keyways only) Primus UL437 Primus XP UL437 Everest SL UL437-XP $65.00 24-119 Classic Everest & Everest 29 83.00 91-042 Everest B & Everest 29 R 33-219 A508-660 20-719 20-719-XP Classic Everest & Everest 29 33-163 33-224 A201-683 145.00 179.00 179.00 $83.00 83.00 145.00 145.00 179.00 179.00 $65.00 Plug Shell Tailpiece (See CYL-53) (See CYL-55) 33-007 A201-849 33-231 A100-050 $83.00 145.00 $65.00 Keyway Type $83.00 83.00 145.00 145.00 179.00 179.00 C604-243 91-742-XP Everest B & Everest 29 R Classic 20-519 20-519-XP Everest & Everest 29 91-542-XP Everest B & Everest 29 R Classic 24-120 Everest & Everest 29 33-162 33-225 NA 33-007 33-231 NA A100-045 A100-049 A201-683 91-043 Everest B & Everest 29 R 33-219 A508-660 20-720 20-720-XP Classic Everest & Everest 29 33-163 33-224 A100-047 91-743-XP Everest B & Everest 29 R Classic 20-520 20-520-XP Everest & Everest 29 91-543-XP Everest B & Everest 29 R Classic 24-126 Everest & Everest 29 CL-Series Everest SL (B/R keyways only) Primus 7L, 8L, Primus XP 10 Line Levers Everest SL Primus XP (B/R keyways only) Primus UL437 Primus XP UL437 Everest SL UL437-XP Price Each Complete Open Restricted Cylinder Keys Side View 33-162 33-225 NA 33-007 33-231 NA A100-046 A100-050 NA C303-437 Assembly with cap A100-047 91-045 Everest B & Everest 29 R 33-219 A508-662 20-726 20-726-XP Classic Everest & Everest 29 33-163 33-224 A100-048 NA C604-243 91-745-XP Everest B & Everest 29 R Classic 20-526 20-526-XP Everest & Everest 29 91-545-XP Everest B & Everest 29 R 33-162 33-225 NA A100-048 NA NA Price Book 8 Effective April 4, 2020 • Rev. 04/20 345 Yale Reference Table, Tailpieces and Actuators CYLINDERS / KEYS / AUXILIARY Competitive Retrofit • CYLINDERS Yale® Retrofit Cylinder Reference Table Complete Lock Series Cylinder Mechanism Cylinder Side View 5300LN 5400LN Levers Standard 24-147 Everest SL (B/R keyways only) 91-046 Primus Primus XP 20-747 20-747-XP Price Each Open Restricted $65.00 $83.00 83.00 145.00 Everest SL Primus XP 91-744-XP (B/R keyways only) Primus UL437 Primus XP UL437 20-547 20-547-XP 144.00 179.00 CYL-46 Everest SL UL437-XP 91-544-XP 5300, 5400, 6200 Series Knobs Standard 24-123 Everest SL (B/R keyways only) 91-046 Primus Primus XP 20-723 20-723-XP Everest SL Primus XP 91-746-XP (B/R keyways only) Primus UL437 Primus XP UL437 20-523 20-523-XP $65.00 $83.00 83.00 145.00 145.00 179.00 Keys Everest SL UL437-XP 91-546-XP Keyway Type Classic 33-007 A201-849 Everest & Everest 29 33-231 A100-050 Everest B & Everest 29 R 33-219 A508-660 Classic 33-163 Everest & Everest 29 33-224 CL-Series Locksets Classic 33-162 Everest & Everest 29 33-225 Everest B & Everest 29 R NA Yale Levers Corbin Russwin CL3400/CL3600 B520-409 Yale Knobs 32.50 C303-437 Sargent 7, 8, 9 (Assembly with cap) 14.20 C604-243 Sargent 6, 7L, 8L, 10 Line 2.00 33-007 A201-849 33-231 A100-050 Everest B & Everest 29 R 33-219 A508-660 Classic 33-163 Everest & Everest 29 33-224 Classic 33-162 Everest & Everest 29 33-225 Everest B & Everest 29 R NA 9.80 Description Price Each $5.50 A501-783 Blocking disc, Yale levers B520-408 Sleeve, Yale cylinders 5.40 B520-407 Washer, Sargent 6.80 C607-062 Spacer, Corbin Russwin CL3300 3.80 For pins, springs, etc., see CYL-51. Price Book 8 346 A201-683 NA B520-409 Everest B & Everest 29 R Miscellaneous Part Number NA Classic $5.20 A301-043 A301-043 A201-683 Everest & Everest 29 Price Each A301-338 A201-683 Everest B & Everest 29 R Tailpieces and Actuators Part Number Plug Shell Tailpiece (See CYL-53) (See CYL-55) Effective April 4, 2020 • Rev. 04/20 A201-683 NA NA Corbin Russwin Master Ring Mortise CYLINDERS • Competitor Retrofit CYLINDERS / KEYS / AUXILIARY 20-009, 20-505, 20-705 For old black cast iron case mortise locks only. Mortise Cylinders, Corbin Russwin Master Ring Cam Description Cylinder Mechanism Complete Cylinder Price Each Open Restricted $210.00 $228.00 Corbin Russwin Master Ring B502-946 Everest & Primus B520-728 For cyl. length B520-728 1 1/8", 1 3/8", 1 5/8" Corbin Russwin Master Ring X Y B520-728 X 20-009 Primus Controlled Access 20-705 330.00 Primus XP Controlled Access 20-705-XP 330.00 Primus UL437 20-505 20-505 365.00 Primus XP UL437 20-505-XP 365.00 Dim. X = .34 Y = .90 B520-729 For cyl. length 1 B520-729 1/4", 1 1/2", 1 3/4" Corbin Russwin Master Ring Master Ring (includes bushing) X Y X X Standard CYL-47 B502-486 Classic Standard Y Y Dim. X = .34 Y = .90 Corbin Russwin Master Ring Y B520-729 X Y Dim. X = .328 Y = .893 Corbin Russwin Master Ring Notes Keys Dim. X = .34 Y = .90 Dim. X = .34 Dim. .90 XY= =.328 Y = .893 Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" Primus add $45.00. For 1 1/2", 1 5/8" and 1 3/4" Conventional add $11.80. Finishes: 605, 606, 609, 612, 613, 625 and 626. To order less Schlage logo specify cylinder “with K510-612 faceplate". Part Number B202-339 Description CL-Series Bushing, Corbin Russwin Master Ring Price Each $103.00 Reducing bushing and screws Cams, Corbin Russwin Master Ring Part Number Description B502-486 Classic Standard - Non Modular Cylinders Price Each $35.70 B502-946 Everest & Primus - Non Modular Cylinders 42.00 XB11-825 Interchangeable core - Non Modular Cylinders 37.00 B520-728 Modular Cylinders (all keyways) length 1-1/8", 1-3/8", 1-5/8" 42.00 B520-729 Modular Cylinders (all keyways) length 1-1/4", 1-1/2", 1-3/4" 42.00 Trim Collars Corbin Russwin Master Ring Part Number 38-033 Specify Finish • Description Price Each $11.50 Trim collar For plugs, shells, pins, springs, etc., see CYL-50, CYL-52, CYL-53, CYL-55. Price Book 8 Effective April 4, 2020 • Rev. 04/20 347 CYLINDERS / KEYS / AUXILIARY Competitor Retrofit • CYLINDERS Cam and Cam Substitutions for Schlage Mortise Cylinders to Operate Other Manufacturer’s Locks CAM Substitutions only allowed on these cylinder numbers: Order Example: 20-001 X B210-731 626 S123 Modular Cylinder (introduced in July 2010) Interchangeable Core FSIC & SFIC 20-001, 20-002, 20-500, 20-501, 20-515, 20-700, 20-701, 20-715, 26-021 20-059, 20-061, 26-064, 20-763, 20-771, 26-091, 26-094, 80-302, 80-110, 80-132, 80-102 B520-730 B520-730 Corbin Russwin DL4000 Series Corbin Russwin DL4000 Series Forhousing housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" For sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" 1 1/8", 1 3/8", 1 5/8" Corbin Russwin® DL4000 Series (Old Corbin 420 and Russwin 1503) B520-730 CYL-48 B520-732 B520-732 CorbinCorbin Russwin A65, A65, Russwin masterB520-734 ring ring ML2200 master Corbin Russwin A65ML2200 For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈" ML2200 master ring deadbolt functions X X manufactured before Y Y 6/10/93 and old Russwin cast iron residential locks. Dim. X = .242 Dim. X = .242 For all Best 40H Series Y = .757 Y = .757 & 30H Deadbolt function B520-736 B520-736 Yale 2160, Arrow 004, Yale 2160, Arrow 004, B520-736 Yale® Sargent Sargent 13-0660 13-0660 2160 For housing sizes: 1¹⁄₈, 1³⁄₈, 1¹⁄₈, 1⁵⁄₈" 1³⁄₈, 1⁵⁄₈" For housing sizes: Arrow® X X #004 Y Y Sargent® 13-0660 All functions except 16 inside Dim. X Dim. = .187 X = .187 Y = .727 and 50 outside Y = .727 CL-Series housing sizes: ForFor housing sizes: 1¹⁄₄,1¹⁄₄, 1¹⁄₂,1¹⁄₂, 1³⁄₄"1³⁄₄" B520-731 X X Classic Standard Non-IC N/A N/A N/A B520-254 (was XB11-426) B520-295 (was XB11-458) B520-366 (was XB11-656) X Y Dim. X = .155 Y = .775 Dim. X= Dim. X .153 = .153 Y= Y .761 = .761 B520-733 B520-733 Corbin Corbin Russwin ML2200ML2200 Series Series Russwin For housing sizes: 1¹⁄₄, 1¹⁄₂,1¹⁄₄, 1³⁄₄"1¹⁄₂, 1³⁄₄" For housing sizes: B520-733 B520-253 (was XB11-352) X Y B520-233 (was XB08-899) X Y Dim. X = .232 Y = .729 Dim. XDim. = .236 X = .236 Y = .731 Y = .731 B520-735 B520-735 CorbinCorbin Russwin A65, A65, Russwin ML2200 mastermaster ring ring ML2200 For housing sizes: 1¹⁄₂, 1³⁄₄" For housing 1¹⁄₄, sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄" B520-735 B520-360 (was XB11-817) X B520-223 (was XB03-142) Y Dim. X = .235 Y = .729 Dim. X = .242 Dim. X = .242 Y = .757 Y = .757 B520-737 B520-737 Yale 2160, Arrow 004, Yale 2160, Arrow 004, Sargent Sargent 13-0660 13-0660 For housing sizes: 1¹⁄₄, 1¹⁄₂, 1¹⁄₄, 1³⁄₄" 1¹⁄₂, 1³⁄₄" For housing sizes: B520-737 X B520-296 (was XB11-461, replaces XB11-484) B520-256 (was XB11-430, replaces XB10-659) Dim. X = .186 Y = .718 Dim. X Dim. = .187 X = .187 Y = .727 Y = .727 X X K510-730 B502-191 Classic Standard X Y DIM X = 0.35” DIM Y = 0.72” Y DIM X = 0.35” DIM Y = 0.72” Y Dim. X = .338 Y = .71 Cam substitution with Cylinders shown above are No Charge Cam B502-191 B502-948 Price $3.60 Cam X Dim. X = .338 Y = .71 Price B520-296 Cam B520-733 B520-329 B520-734 B520-233 B520-360 B520-366 X Y Dim. X = .338 Y = .71 Price B520-732 B520-309 12.70 B502-948 Everest & Primus Not available for substitution B520-223 B520-253 $12.70 B520-735 B520-367 B520-737 B520-256 B520-730 K510-730 Price Book 8 Effective April 4, 2020 • Rev. 04/20 $12.70 B520-736 B530-254 B520-731 348 X Y L583-477 B520-329 (was XB11-631, replaces XB11-630) X Y L583-476 Y B520-367 (was XB11-887) X X Y Y B520-309 (was XB11-629) X Y Y Everest, Primus Non-IC For Standard Pinned For Primus & Everest Cylinders Manufactured Cylinders Manufactured before before July 2010 July 2010 Not Available with Cylinder Not Available with Cylinder Y Y Corbin Corbin Russwin ML2200ML2200 Series Series Russwin B520-732 Corbin Russwin® For housing sizes: 1¹⁄₈, 1³⁄₈,1¹⁄₈, 1⁵⁄₈"1³⁄₈, 1⁵⁄₈" For housing sizes: ML2200 Series X (Old Corbin 7000-9000 X Y Y and Russwin 4000-5000) All functions except ML2255 and Dim. XDim. = .236 X = .236 Y = .731 ML2242 inside Y = .731 (see straight cam) B520-734 B520-734 Best 30 Latch Function B520-731 1 B520-731 1/4", 1 1/2", 1 3/4" Corbin Russwin DL4000 Series Corbin Russwin DL4000 Series XX YY Dim. Dim.X X= =.153 .153 Y Y= =.761 .761 Keys Cams for Schlage 3.60 CYLINDERS • Competitor Retrofit Cams for Schlage CAM Substitutions only allowed on these cylinder numbers: Order Example: 91-051 X B520-780 626 R123 91-051 118 91-051 114 Corbin Russwin® ML2200 Series (Old Corbin 7000-9000 and Russwin 4000-5000) All functions except ML2255 and ML2242 inside (see straight cam) B520-782 B520-783 Corbin Russwin A65 ML2200 master ring deadbolt functions manufactured before 6/10/93 and old Russwin cast iron residential locks. For all Best 40H Series & 30H Deadbolt function B520-784 B520-785 Yale® 2160 Arrow® #004 Sargent® 13-0660 All functions except 16 inside and 50 outside B520-786 B520-787 Best 30 Latch Function L583-802 L583-803 Cam CL-Series Corbin Russwin DL4000 Series (Old Corbin 420 and Russwin 1503) Keys 1 1/4" B520-781 CYL-49 1 1/8" B520-780 ® CYLINDERS / KEYS / AUXILIARY Competititor Cams for SL Modular Cylinder Price B520-780 B520-781 B520-782 B520-783 B520-784 B520-785 $12.70 B520-786 B520-787 L583-802 L583-803 Price Book 8 Effective April 4, 2020 • Rev. 04/20 349 CYLINDERS • Mail Box CYLINDERS / KEYS / AUXILIARY 20-033 20-067 20-066 20-030 20-069 20-001 CYL-50 Letter/Mail Box Cylinders and Application Table Keyway Type Cam (See Below) Plug (See CYL-55) Shell (See CYL-57) Classic C604-268 33-616 C203-726 Everest & Everest 29 C604-268 33-234 A100-051 Classic C604-269 33-616 C203-726 Everest & Everest 29 C604-269 33-234 A100-051 Classic L583-476 33-137 N/A Everest & Everest 29 L583-476 33-138 N/A Description American Device Auth, 466, 470, 480 Series Keys Bommer vertical mail box Bommer & Florence, Cutler Mail Chute, Federal Equipment Classic C604-269 33-616 C203-726 Everest & Everest 29 C604-269 33-234 A100-051 Corbin Wood Products Classic C604-271 33-616 C203-726 Everest & Everest 29 C604-271 33-234 A100-051 Classic C604-088 33-806 Everest & Everest 29 C604-419 33-233 CL-Series Dura Steel Notes: A508-653 Complete Cyl. Price Complete Cylinder Open Restricted $97.00 $115.00 86.00 104.00 97.00 115.00 20-066 20-067 20-001-118 20-069 20-033 20-030 Finishes: 606 and 626. 20-001 also available 605, 612, 613 and 625. Federal law prohibits the master keying of a letter box cylinder. Miscellaneous Parts Part Number Description B502-468 Screw, 2 required, 20-030 Classic (order multiples of 100) B502-942 Screw, 20-030 Everest (order multiples of 100) Miscellaneous Parts Price Each Part Number Description Price Each $37.30 C604-088 Cam, 20-030 Classic C604-089 Bracket, 20-030 0.50 C604-226 Screw, 2 req’d, 20-033, 20-066, 20-067, 20-069 (order mult. of 100) 0.28 C503-346 Spacer, 20-033, 20-066, 20-067, 20-069 1.60 C604-234 Washer, 2 req’d, 20-033, 20-066, 20-067, 20-069 (order mult. of 100) 0.28 C604-050 Mounting bracket, 20-033 14.10 C604-268 Cam, 20-066 24.60 C604-051 Screw post, 2 req’d, 20-033 2.10 C604-269 Cam, 20-067, 20-069 24.60 C604-052 Screw, 2 req’d, 20-033 2.90 C604-271 Cam, 20-033 30.20 C604-053 Lock washer, 2 req’d, 20-033 2.90 C604-419 Cam, 20-030 Everest 37.50 $0.36 For pins, springs, etc., see CYL-50. Price Book 8 350 Effective April 4, 2020 • Rev. 04/20 27.80 Cylinders, Non-Standard Finishes Special • CYLINDERS 6 Extended Factory Lead Time “X” Number Description Price Each Extra Long Mortise Cylinders XB03-418 Mortise cylinder (20-001, 30-001 or 30-004), 1 7/8" – 5" long Classic, Everest or Everest 29 Full size IC mortise cylinder (26-091 or 30-008), 2 1/4" – 5" long Classic, Everest or Everest 29 XB11-475* Primus full size IC mortise cylinder (20-763 or 20-798), 2 1/4" – 5" long Full size IC mortise cylinder housing less core (20-059 or 30-007) 2 1/4" – 5" long XB11-638 Primus mortise cylinder (20-700, 20-787 or 20-789), 1 7/8" – 5" long $593.00 813.00 1,082.00 714.00 1,082.00 Mortise Cylinder with Switch XB09-195 Mortise cylinder (20-001) with “on” and “off” switch for key controlled electrical circuits, standard $629.00 XB09-795 Same as XB09-195, but double position, Classic Standard only (no master keying available) 643.00 XQ11-804 Primus mortise cylinder (20-700) with “on” and “off” switch for key controlled electrical circuits 831.00 CYLINDERS / KEYS / AUXILIARY Special Cylinders Rim Cylinders XB04-618 Insure device/ trim thickness is included in addition to door thickness Primus cylinder (20-710) for doors over 3" thick Insure device/ trim thickness is included in addition to door thickness XB11-789 Conventional standard pinned cylinder (20-022) with mounting holes for Sargent® exit device XB11-790 Primus cylinder (20-710) with mounting holes for Sargent exit device ® Full size IC, Standard core (20-057) for doors over 3" thick Insure device/ trim thickness is included in addition to door thickness Full size IC, Primus core (20-757) for doors over 3" thick Insure device/ trim thickness is included in addition to door thickness Full size IC, housing less core (20-079) for doors over 3" thick Insure device/ trim thickness is included in addition to door thickness 826.00 141.00 288.00 777.00 1,044.00 Keys XB11-958 $745.00 CYL-51 Conventional standard pinned cylinder (20-021 or 20-022) for doors over 3" thick 678.00 * Available in 1/4" increments. Order collars or blocking rings separately to fill any gaps. Note: CL-Series If you are unable to find your required hardware solution in this price book, please use the Schlage Innovation Center Process in the Forms and Example section. Price Book 8 Effective April 4, 2020 • Rev. 04/20 351 Pins & Springs Full Size Cylinders Keys CYL-52 CYLINDERS / KEYS / AUXILIARY CYLINDERS • Parts Original Manufacturer Nickel Silver Pins-Full Size Cylinders Primus® Finger Pins and Sidebars Part Number Description Part Number 34-101 34-102 34-103 34-202 34-203 34-204 34-205 34-206 34-207 34-208 34-209 34-300 34-301 34-302 34-303 34-304 34-305 34-306 34-307 34-308 34-309 34-007 Type Top pins Master pins Bottom pins Everest & Everest 29 check pin Size #1 #2 #3 #2 #3 #4 #5 #6 #7 #8 #9 #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 — Price Each Order in multiples of 100 $0.08 34-001 Finger pin #1 34-002 Finger pin #2 34-003 Finger pin #3 34-004 Finger pin #4 34-005 Finger pin #5 34-006 Finger pin #6 34-058 Finger pin #7 C603-950 Sidebar 4.10 Description Price Each C503-116* Cap pin (non-IC) Order in multiples of 100 $0.24 C503-118* Cap Order in multiples of 25 1.70 C603-827 Full Size IC Cap Pin Order in multiples of 100 0.28 *See CYL-13 for KC-Series cap and cap pin Construction Balls, RCK Part Number 34-401 Price Each Description $32.00 Pack of 1,000 ball bearings Springs CL-Series Order in multiples of 100 $1.00 Cap and Cap Pin Part Number Order in multiples of 50 1.70 Price Each Description Part Number C503-113 C503-115 C603-951 C603-952 Price Each Description Pin tumbler spring (including Primus) Cap retainer pin spring (including Primus) Primus finger pin spring and Everest check pin spring Primus sidebar spring Order in multiples of 100 $0.20 Ward Rings Part Number K510-045 K510-434 Price Each Description Stop ring for hotel function Everest & Everest 29 mortise cylinders Stop ring for hotel function Classic mortise cylinders Price Book 8 352 Effective April 4, 2020 • Rev. 04/20 3.80 3.80 Ordering Shaded prices are specified in unit quantities (per piece) and must be ordered in multiples. Example: Order 100 34-300, Receive 1 bag of 100 pins. Price = $8.00 Pins & Springs Small Format Interchangeable Cores Parts • CYLINDERS Description Type Part Number Master/ build-up/ top pins Bottom pins – PriceEach Order in multiples of 100 $0.10 Ordering Shaded prices are specified in unit quantities (per piece) and must be ordered in multiples. Example: Order 100 34-300, Receive 1 bag of 100 pins. Price = $8.00 Keys Everest & Everest 29 check pin Size #2B #3B #4B #5B #6B #7B #8B #9B #10B #11B #12B #13B #14B #15B #16B #17B #18B #19B #0A #1A #2A #3A #4A #5A #6A #7A #8A #9A CYL-53 34-902 34-903 34-904 34-905 34-906 34-907 34-908 34-909 34-910 34-911 34-912 34-913 34-914 34-915 34-916 34-917 34-918 34-919 34-800 34-801 34-802 34-803 34-804 34-805 34-806 34-807 34-808 34-809 34-950 CYLINDERS / KEYS / AUXILIARY Original Manufacturer Nickel Silver Pins 1.70 SFIC Caps Part Number Price Each Order in multiples of 500 $0.08 21C Cap CL-Series 34-952 Description SFIC Springs Part Number Description 20S Tumbler spring C504-114 Everest & Everest 29 check spring pin C504-116 Price Each Order in multiples of 500 $0.08 Order in multiples of 100 0.20 SFIC Plug Retainer Part Number C603-936 Note: Description Plug retainer Price Each Order in multiples of 20 $2.00 SFIC plug retainer is compatible with SFIC Everest products manufactured after October 18, 2002. Price Book 8 Effective April 4, 2020 • Rev. 04/20 353 Pins & Springs Full Size Cylinders CL-Series Keys CYL-54 CYLINDERS / KEYS / AUXILIARY Parts • CYLINDERS Springs For SL Cylinders L Pins For SL Cylinders Part Number Description 90-200 L-PIN, 0 90-201 L-PIN, 1 90-202 L-PIN, 2 90-203 L-PIN, 3 90-204 L-PIN, 4 90-205 L-PIN, 5 90-206 L-PIN, 6 90-207 L-PIN, 7 90-208 L-PIN, 8 90-209 L-PIN, 9 90-200-2 L-PIN, MASTER, 0,2 90-200-4 L-PIN, MASTER, 0,4 90-200-6 L-PIN, MASTER, 0,6 90-200-8 L-PIN, MASTER, 0,8 90-201-3 L-PIN, MASTER, 1,3 90-201-5 L-PIN, MASTER, 1,5 90-201-7 L-PIN, MASTER, 1,7 90-201-9 L-PIN, MASTER, 1,9 90-202-4 L-PIN, MASTER, 2,4 90-202-6 L-PIN, MASTER, 2,6 90-202-8 L-PIN, MASTER, 2,8 90-203-5 L-PIN, MASTER, 3,5 90-203-7 L-PIN, MASTER, 3,7 90-203-9 L-PIN, MASTER, 3,9 90-204-6 L-PIN, MASTER, 4,6 90-204-8 L-PIN, MASTER, 4,8 90-205-7 L-PIN, MASTER, 5,7 90-205-9 L-PIN, MASTER, 5,9 90-206-8 L-PIN, MASTER, 6,8 90-207-9 L-PIN, MASTER, 7,9 Order single cut and master L pins in multiples of 100 90-201-3-5 L-PIN, CROSS-KEY, 1,3,5 90-201-3-7 L-PIN, CROSS-KEY, 1,3,7 90-201-3-9 L-PIN, CROSS-KEY, 1,3,9 90-201-5-7 L-PIN, CROSS-KEY, 1,5,7 90-201-5-9 L-PIN, CROSS-KEY, 1,5,9 90-201-7-9 L-PIN, CROSS-KEY, 1,7,9 90-203-5-7 L-PIN, CROSS-KEY, 3,5,7 90-203-5-9 L-PIN, CROSS-KEY, 3,5,9 90-203-7-9 L-PIN, CROSS-KEY, 3,7,9 90-205-7-9 L-PIN, CROSS-KEY, 5,7,9 90-201-3-5-7 L-PIN, CROSS-KEY, 1,3,5,7 90-201-3-5-9 L-PIN, CROSS-KEY, 1,3,5,9 90-201-5-7-9 L-PIN, CROSS-KEY, 1,3,7,9 90-203-5-7-9 L-PIN, CROSS-KEY, 3,5,7,9 90-201-3-5-7-9 L-PIN, CROSS-KEY, 1,3,5,7,9 90-200-2-4 L-PIN, CROSS-KEY, 0,2,4 90-200-2-6 L-PIN, CROSS-KEY, 0,2,6 90-200-2-8 L-PIN, CROSS-KEY, 0,2,8 90-200-4-6 L-PIN, CROSS-KEY, 0,4,6 90-200-4-8 L-PIN, CROSS-KEY, 0,4,8 90-200-6-8 L-PIN, CROSS-KEY, 0,6,8 90-202-4-6 L-PIN, CROSS-KEY, 2,4,6 90-202-4-8 L-PIN, CROSS-KEY, 2,4,8 90-202-6-8 L-PIN, CROSS-KEY, 2,6,8 90-204-6-8 L-PIN, CROSS-KEY, 4,6,8 90-200-2-4-6 L-PIN, CROSS-KEY, 0,2,4,6 90-200-2-4-8 L-PIN, CROSS-KEY, 0,2,4,8 90-200-2-6-8 L-PIN, CROSS-KEY, 0,2,6,8 90-202-4-6-8 L-PIN, CROSS-KEY, 2,4,6,8 90-200-2-4-6-8 L-PIN, CROSS-KEY, 0,2,4,6,8 Order cross-key L pins in multiples of 25 Price Each Part Number Price Each $0.22 End Cap and End Cap Pin For SL Part Number Description 90-211 END CAP 90-002 END CAP PIN Order in multiples of 50 $1.00 Price Each $ 1.90 0.22 Cylinder Parts For SL Part Number Description 90-210 C604-471 LOCKING SIDE BAR RETAINING CLIP CHECK PIN, EVEREST B, 34-950 EVEREST 29 R 90-212 TOP COVER Order in multiples of 50 1.00 Price Book 8 354 Description C604-472 SPRING, LOCKING SIDEBAR C603-952 END CAP PIN SPRING C603-951 L PIN SPRING C604-472 CHECK PIN SPRING Order in multiples of 100 Effective April 4, 2020 • Rev. 04/20 Price Each $4.40 0.62 1.80 0.12 CYLINDERS • Parts Plugs for Modular Housing. CYLINDERS / KEYS / AUXILIARY Cam L583-474 or L583-475 Cam Screw, 1” B520-692 Cam Screw, ³⁄₄” B520-691 Plug Extension B590-299 Cam L583-474 or L583-475 1³⁄₄" Plug Extension B590-298 1⁵⁄₈" 1¹⁄₂" Cam Screw, ¹⁄₂” B520-690 Cam L583-474 or L583-475 1³⁄₈" CYL-55 1¹⁄₄" 1¹⁄₈" housing B520-692 B590-299 Modular Housing Interchangeability Housing Cam Cam Screw Plug Extension Part Number B520-721 1-1/8" L583-474 B520-690 – B520-722 1-1/4" L583-475 B520-690 – B520-723 1-3/8" L583-474 B520-691 B590-298 B520-724 1-1/2" L583-475 B520-691 B590-298 B520-725 1-5/8" L583-474 B520-692 B590-299 B520-726 1-3/4" L583-475 B520-692 B590-299 CL-Series Size Keys Part Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 355 CL-Series Keys CYL-56 CYLINDERS / KEYS / AUXILIARY Parts • CYLINDERS Plugs for Key-in-Knob/Lever, etc. Plugs, Key-in-Knob/Lever, Deadlock and Mail Box Part Number 33-005* 33-137 33-007 33-059* 33-059-149* 33-060 33-065* 33-080 33-081 33-119 33-154 33-136 33-162 33-163 33-167 33-186 33-213 33-214 33-216 33-221 33-222 33-223 33-224 33-225 33-138 33-231 33-232 33-233 33-234 33-235 33-616 33-806 Notes: Description 5-Pin (except F51 and F80), C, CE, E and F keyways only 6-Pin Classic Standard Sargent & Yale, Classic Standard 5-Pin, F, FA-Series Knobs, BEL, GEO, PLY, AND, DNB (C keyway only) 5-Pin, F-Series Knobs, ORB, C keyway only Corbin Russwin CK4200, UT5200 Classic Standard 5-Pin, F, FA-Series Levers, ACC, AVA, FLA, CLT, CHP, STA (C keyway only) Corbin Russwin CK4200, UT5200 Classic Primus UL437 / Classic Primus XP UL437 Corbin Russwin CK4200, UT5200 Classic Primus / Classic Primus XP Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP Classic Primus UL437 / Classic Primus XP UL437 Classic Primus / Class Primus XP Sargent & Yale, Classic Primus UL437 / Classic Primus XP UL437 Sargent & Yale, Classic Primus / Classic Primus XP B600 Plug, Classic B600 Plug, Everest PLUG, CYL, KIK, SL, 7-PIN PLUG, CYL, KIK, SL, 7-PIN, PRIMUS 6-pin Classic, hotel function Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 Corbin Russwin CK4200, UT5200, Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP Corbin Russwin CK4200, UT5200, Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 Sargent & Yale, Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP Sargent & Yale, Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 Everest & Everest 29 Standard Sargent & Yale, Everest & Everest 29 Standard Corbin Russwin CK4200, UT5200, Everest & Everest 29 Standard Mail box 20-030 Everest & Everest 29 Standard Mail box 20-033, 20-066, 20-067, 20-069 Everest & Everest 29 Standard Everest & Everest 29 hotel function Mail box 20-033, 20-066, 20-067, 20-069 Classic Standard Mail box 20-030 Classic Standard Specify finish: 606 (430 for F-Series Knobs & Levers) and 626 (429 for F-Series Knobs & Levers). * These plugs are pre-drilled for lost ball construction keying (33-005 is pre-drilled in C keyway only). Price Each $41.60 27.90 41.90 28.00 105.00 74.50 78.10 101.00 78.10 105.00 75.00 50.90 54.90 44.10 78.10 59.10 105.00 11.30 105.00 75.00 105.00 44.10 59.10 44.30 Modular Cylinders Plugs-Key In lever/ Knob Part Number 33-137 33-138 33-136 33-119 Price Each $41.60 44.10 78.10 78.10 Description 6 Pins, Plug, Classic 6 Pins, Plug, Everest 6 Pins, Plug, Classic Primus / Primus XP 6 Pins, Plug, Everest Primus / Primus XP Plugs, Full Size Interchangeable Core Part Number 33-058* 33-133 33-139 33-160 33-236 Notes: Description Classic Standard Everest & Everest 29 Standard hotel function Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP Classic Primus / Classic Primus XP Everest & Everest 29 Standard Specify 606 or 626 finish. IC cap pins and cap pin springs must be ordered separately. *For L-Series Classic hotel cylinders, specify “warded.” Price Book 8 356 Effective April 4, 2020 • Rev. 04/20 Price Each $45.60 78.70 62.20 CYLINDERS • Parts Shells/ bodies Part Number A508-653 A508-655 33-213 33-214 Description 6 Pin, Body & Cover, Classic, Everest, Everest 29 6 Pin, Body & Cover, Primus/Primus XP PLUG, CYL, KIK, SL, 7-PIN PLUG, CYL, KIK, SL, 7-PIN, PRIMUS CYLINDERS / KEYS / AUXILIARY Key in Lever/ Knob -Modular Cylinders Type Price Each $31.70 61.50 44.10 78.10 Back Housings-Modular Cylinder Description Price Each B520-721 Back Housing, Mortise 1-1/8" $9.20 B520-722 Back Housing, Mortise 1-1/4" 9.20 B520-723 Back Housing, Mortise 1-3/8" 9.20 B520-724 Back Housing, Mortise 1-1/2" 36.50 B520-725 Back Housing, Mortise 1-5/8" 36.50 B520-726 Back Housing, Mortise 1-3/4" 36.50 B520-727 Back Housing, Rim 9.20 K110-480 316 Front housing 643e finish 9.20 K110-480 605 Front housing 605 finish 9.20 K110-480 606 Front housing 606 finish 9.20 K110-480 609 Front housing 609 finish 9.20 K110-480 612 Front housing 612 finish 9.20 K110-480 613 Front housing 613 finish 12.20 K110-480 619 Front housing 619 finish 9.20 K110-480 622 Front Housing 622 finish 9.20 Front housing 625 finish 9.20 Front housing 626 finish 6.30 K110-480 629 Front housing 629 finish 9.20 K110-480 630 Front housing 630 finish Keys K110-480 625 K110-480 626 CYL-57 Part Number 9.20 Order in Multiples of 100 Screw, Cam , 5-40 X 1/2" (for modular cylinders length 1 1/8" & 1 1/4") $0.24 B520-691 Screw, Cam , 5-40 X 3/4" (for modular cylinders length 1 3/8" & 1 1/2") 0.46 B520-692 Screw, Cam , 5-40 X 1"(for modular cylinders length 1 5/8" & 1 3/4") 0.62 B520-693 Modular cylinder housings screws, 8-32 X 7/8" 1.80 B590-298 Plug extension 1-3/8", 1-1/2" 2.80 B590-299 Plug extension 1-5/8", 1-3/4" 2.80 CL-Series B520-690 Ordering Shaded prices are specified in unit quantities (per piece) and must be ordered in multiples. Example: Order 100 B520-690, Receive 1 bag of 100 cam screws. Price = $24.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 357 Keys CYL-58 CYLINDERS / KEYS / AUXILIARY Parts • CYLINDERS Shells, Key-in-Knob/Lever, Deadlock and Mail Box Part Number Description A100-049 Sargent 8 Line Everest & Everest 29 Standard A100-050 Sargent 6 Line Everest & Everest 29 Standard A100-051 Mail box 20-033, 20-066, 20-067, 20-069 Everest & Everest 29 Standard C203-726 Corbin Russwin CK4200, UT5200 Everest & Everest 29 Standard Price Each $37.80 A508-655 6-Pin, Body & Cover, Primus / Primus XP 67.10 A201-690 Corbin Russwin CK4200, UT5200 Primus / Primus XP 65.70 A201-691 Corbin Russwin CK4200, UT5200 Classic Standard A508-653 6 Pin, Body & Cover, Classic/Classic, Everest, Everest 29 A201-848 5-Pin Classic (except F-Series Knobs & Levers) A100-045 Sargent 8 Line Classic Standard A100-046 Sargent vertical Standard 32.70 A100-047 Sargent 8 Line Primus® / Primus XP A100-048 Sargent vertical Primus / Primus XP C203-726 Mail box 20-033, 20-066, 20-067, 20-069 Classic Standard 67.10 37.80 Shells, Interchangeable Core Part Number Specify Finish Description B220-006 • Everest & Everest 29 Standard B220-117 • Everest & Everest 29 hotel function, Schlage logo $37.80 76.80 B220-280 • Primus / Primus XP B220-282 • 6-Pin Classic Standard (except hotel function) B220-284 • Classic hotel function, Schlage logo Note: Price Each 36.40 Finishes: 606 and 626 only. Modular Cylinders Mortise and Rim Cylinders Components & Service Kits Part Number Description Price Each CL-Series Service kit- Back Housing for 1 1/8" length 09-992 Back Housing B520-721 Mortise 1 1/8", 2 Housing screws B520-693, cam screw B520-690 $9.30 Order front housing and cam separately Service kit-Back Housing for 1 1/4" length 09-993 B520-722 Mortise 1 1/4", 2 Housing screws B520-693, cam screw B520-690 10.70 Order front housing and cam separately Service kit -back housing for 1 3/8" length 09-994 B520-723 Back Housing Mortise 1 3/8", plug extension B590-298, cam screw B520-691, 16.90 2 housing screws B520-693. Order front housing and cam separately Service kit- back housing for 1 1/2" length Back Housing, 09-995 B520-724 Mortise 1 1/2", 2 Housing screws B520-693 , plug extension B590-298, 44.10 cam screw B520-691. Order front housing and cam separately Service kit- back housing for 1 5/8" length 09-996 Back Housing, B520-725 Mortise 1 5/8", 2 Housing screws B520-693, plug extension 44.10 B590-299, cam screw B520-692. Order front housing and cam separately Service kit-back housing for 1 3/4" length 09-997 Back Housing, B520-726 Mortise 1 3/4", 2 Housing screws B520-693 , 44.10 plug extension B590-299, cam screw B520-692. Order front housing and cam separately Service kit-back housing Rim Cyl 09-998 Back Housing Rim B520-727, housing screws B520-693, Tail piece B502-899, Driver B502-310, back plate & screws B202-328. Order front housing and cam separately Price Book 8 358 Effective April 4, 2020 • Rev. 04/20 22.00 KEYS CYLINDERS / KEYS / AUXILIARY Bow Cylinders KEYS-1 Shoulder CL-Series Blade Price Book 8 Effective April 4, 2020 • Rev. 04/20 359 KEYS To order Schlage products, descriptive data should be in the same sequence as shown below. Outside Line Item Qty 1 100 Product DES FIN Inside DES FIN Hand Latch Strike Dr Thk Ext 35-272 S123 Line Item: Qty: Product: Outside Des: Outside Fin: Inside Des: Inside Fin: Hand: Latch: Strike: Dr Thk: Ext: Dim: Additional Details: Line item number Quantity Product number + keyway Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Not Applicable Primus XP #, Everest 29 Facility Code, Locksmith ID#, Additional stamping instructions CL-Series KEYS-2 Cylinders CYLINDERS / KEYS / AUXILIARY Ordering Procedures Common Pricing Information 1. Cut keys ordered with locks are priced according to appropriate extra cut key charge listed on page Keys-26. 2. Grand master sections L, LP (Primus) and Y are supplied in stainless steel only and are recommended to be cut at the factory only. 3. Stamping standards and charges are listed on page Keys-18. 4. Keying services and associated charges are listed on page Keys-22. 5. All primus Level 1+ and 7 key orders must contain the locksmith ID. 6. All restricted key orders are subject to the restricted keyway sales policies are listed in Terms & Conditions. 7. Master, grand master sections (H, J, K, L, etc.) for key blanks can be ordered in any quantity and are not subject to the purchasing in multiples of 50 Price Book 8 360 Effective April 4, 2020 • Rev. 04/20 DIM Additional Details Introduction KEYS & KEYING CYLINDERS / KEYS / AUXILIARY Table of Contents Cylinders Keys Ordered Separately Keys-4 Classic Standard Key Blanks ...................................................................................................................................................... Keys-4 Classic Standard Cut Keys .......................................................................................................................................................... Keys-5 Everest® Full Size Standard Key Blanks and Cut Keys ....................................................................................................... Keys-6 Everest® Small Format IC Key Blanks and Cut Keys............................................................................................................. Keys-7 Key Blanks, Best® Key Sections................................................................................................................................................... Keys-7 Everest 29™ Full Size Standard Key Blanks and Cut Keys................................................................................................. Keys-8 Everest 29™ Small Format IC Key Blanks and Cut Keys..................................................................................................... Keys-9 Classic Primus® Key Blanks, Cut Keys and I.D. Cards ........................................................................................................ Keys-10 Classic Primus® XP Key Blanks, Cut Keys and I.D. Cards .................................................................................................... Keys-11 Everest® Primus® Key Blanks, Cut Keys and I.D. Cards........................................................................................................Keys-12 Everest® Primus® XP Key Blanks, Cut Keys and I.D. Cards.................................................................................................Keys-15 Split Key Construction Keys ...................................................................................................................................................... Keys-17 Special Keys.................................................................................................................................................................................... Keys-17 Presentation Keys......................................................................................................................................................................... Keys-18 Key Stamping Keys-19 Cylinder Stamping Keys-20 Construction Core Program Keys-21 Full Size Construction Core Program....................................................................................................................................... Keys-21 Small Format Construction Core Program........................................................................................................................... Keys-22 Keying Charges Keys-23 Contract Master Keying ............................................................................................................................................................. Keys-23 Contract Construction Keying (CK)/Split Key Construction Keying............................................................................. Keys-23 Other Keying (Non-Master Keyed) ........................................................................................................................................ Keys-23 Residential Master Keying (RMK) and/or Residential Construction Keying (RCK)................................................. Keys-24 Custom Presentation Keys, Homeowners Document Folders........................................................................................Keys-25 Bitting Lists (Transcripts).......................................................................................................................................................... Keys-26 KSC Generic Key Charts.............................................................................................................................................................. Keys-26 Keys Ordered with Locks or Cylinders ................................................................................................................................... Keys-27 Pack Change Keys Independently (PKI) .............................................................................................................................. Keys-27 SITEMASTER 200® Keys-28 Key System Management Software...................................................................................................................................... Keys-28 How To Order Forms & Examples Letter of Authorization................................................................................................................................................................Keys-29 Primus Order Check List...............................................................................................................................................................Keys-30 Master Keyed Order Form and Example ................................................................................................................................Keys-31 Master Key System System Summary....................................................................................................................................Keys-35 Primus Face Sheet........................................................................................................................................................................Keys-45 Primus Signature Form................................................................................................................................................................Keys-47 KEYS-3 CL-Series Cylinders: Schlage Cylinder and Keyway Terminology. Price Book 8 Effective April 4, 2020 • Rev. 04/20 361 KEYS & KEYING • Keys Ordered Separately CYLINDERS / KEYS / AUXILIARY 35-100 (5-Pin Standard) 35-101 (6-Pin) 35-130 (5-Pin) 35-131 (6-Pin) Classic Standard Key Blanks 35-102 35-056 CONTROL 35-143 (5-Pin) 35-144 (6-Pin) Cylinders 35-140 (5-Pin) 35-141 (6-Pin) Classic Standard Key Blanks KEYS-4 Price Each Part Number Description Restricted Sections Standard Bow 35-100 Standard bow, embossed both sides Order in multiples of 50 5-Pin 35-130 Standard bow, unembossed both sides 35-101 Standard bow, embossed both sides $1.50 2.00 Standard bow, unembossed both sides 35-102 Emergency 35-056 $5.30 Order in multiples of 50 6-Pin 35-131 CL-Series Standard Sections Standard bow, embossed both sides, notched for all ward positions 7.20 6.30 Standard bow, embossed both sides 35-076 Control 35-077 35-079 Standard bow, unembossed both sides 6.50 Hotel Function, embossed both sides Hotel Function, unembossed both sides Large Bow 35-140 5-Pin 35-141 6-Pin Large bow, embossed both sides $5.90 Access bow, embossed both sides $5.90 Access Bow 35-143* 5-Pin 35-144** 6-Pin Note: * ** Large bow custom logo keys are available as key blanks only. Cut keys are not available. Available with C, CE, E, and F key sections only. Available with all sections except L and Y. Price Book 8 362 Effective April 4, 2020 • Rev. 04/20 Keys Ordered Separately • KEYS & KEYING 49-100 (5-Pin) 49-101 (6-Pin) R492518 86776 C AA Combination C 48-056 49-056 Registry # R492518 CONTROL C Master Key Symbol Section Section Section Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Classic Standard Cut Keys Price Each Part Number Description CYLINDERS / KEYS / AUXILIARY 48-100 (5-Pin) 48-101 (6-Pin) Standard Sections Restricted Sections Standard Bow 5-Pin 48-101 6-Pin 48-130 5-Pin 48-131 6-Pin 48-102 Emergency 48-056 Standard bow, embossed both sides $16.60 $6.30 Standard bow, unembossed both sides Cylinders 48-100 – 16.60 16.60 16.60 16.60 Large bow, embossed both sides 9.00 – Access bow, embossed both sides 9.00 – Standard bow, embossed both sides, notched for all ward positions Standard bow, embossed both sides 48-076 Control 48-077 48-079 Standard bow, unembossed both sides Hotel Function, embossed both sides Hotel Function, unembossed both sides 48-140 5-Pin 48-141 6-Pin KEYS-5 Large Bow Access Bow 48-143* 5-Pin 48-144** 6-Pin * ** Available with C, CE, E, and F key sections only. Available with all sections except L and Y. CL-Series Classic Standard Master Keys Part Number Description Price Each Standard Bow 49-100 5-Pin 49-101 6-Pin 49-130 5-Pin 49-131 6-Pin 49-102 Emergency 49-056 49-076 49-077 Standard bow, embossed both sides 11.00 Standard bow, unembossed both sides Standard bow, embossed both sides, notched for all ward positions Standard bow, embossed both sides Control 49-079 Standard bow, unembossed both sides 16.60 Hotel Function, embossed both sides Hotel Function, unembossed both sides Large Bow 49-140 5-Pin 49-141 6-Pin Large bow, embossed both sides 14.80 Access bow, embossed both sides 14.80 Access Bow 49-143* 5-Pin 49-144** 6-Pin Price Book 8 Effective April 4, 2020 • Rev. 04/20 363 Full Size Everest Standard Key Blanks, Cut Keys, Master Keys CYLINDERS / KEYS / AUXILIARY KEYS & KEYING • Keys Ordered Separately 35-009 Standard for Everest C Family 35-002 Standard for Everest D Family 35-003 Control Back of All Blanks (except 35-015) Facility Code (Everest D Family Only) DO NOT DUPLICATE Pat. 5,715,717 Pat. 5,715,717 DO NOT DUPLICATE Pat. 5,715,717 001426 DO NOT DUPLICATE Pat. 5,715,717 Section Full Size Everest Standard Key Blanks Part Number Description Cylinders 35-015 Unembossed Standard embossed key C Family Open Sections Order in multiples of 50 35-009 DO NOT DUPLICATE embossed key 35-002 DO NOT DUPLICATE unembossed key 35-015 Control key, DND embossed 35-003 Control key, DND, hotel function 35-016 Emergency key blank, DND 35-007 D Family Restricted Sections — $3.70 $7.60 6.10 7.60 6.10 7.60 KEYS-6 Note: 1) See page Keys-12 for key stamping options. 35-009 Standard for Everest C Family 35-002 Standard for Everest D Family 35-015 Unembossed 35-003 Control Back of All Blanks (except 35-015) Facility Code (Everest D Family Only) Pat. 5,715,717 DO NOT DUPLICATE Pat. 5,715,717 DO NOT DUPLICATE Pat. 5,715,717 001426 DO NOT DUPLICATE Pat. 5,715,717 CL-Series Section Full Size Everest Standard Cut Keys Description Part Number Standard key 48-009 DO NOT DUPLICATE key 48-002 DO NOT DUPLICATE key, unembossed 48-015 Set-up key 48-013 Master key 49-009 Master key, DO NOT DUPLICATE 49-002 Master key, DO NOT DUPLICATE, unembossed 49-015 Control key DND std., non-factory system 48-003 Control key DND std., factory system 49-003 Control key DND, hotel function, non-factory 48-016 Control key DND, hotel function, factory sys. 49-016 Emergency key DND, non-factory system 48-007 Emergency key DND, factory system 49-007 C Family Open Sections — $9.60 $17.60 — 17.60 Price Book 8 364 D Family Restricted Sections Effective April 4, 2020 • Rev. 04/20 17.60 SFIC Everest Restricted & Best® Key Sections Keys Ordered Separately • KEYS & KEYING 48-401 Operating Keys 49-356 Control Keys CYLINDERS / KEYS / AUXILIARY 35-401 Key Blanks 49-401 Master Keys Registry No. Key Symbol AA R492518 001426 Section Facility Code Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Small Format Interchangeable Core Keys, Everest B Restricted Key Sections Part Number Description Price Each Key Blanks Embossed key blank (operating and SFIC control) 35-021 Unembossed key blank (operating and SFIC control) Cylinders 35-401 Order in multiples of 50 $7.10 Cut Keys 48-401 Embossed operating key 48-021 Unembossed operating key $14.00 Master Keys Embossed master key 49-021 Unembossed master key 49-356 Embossed control key 49-022 Unembossed control key $14.40 KEYS-7 49-401 Everest SL Full Size Interchangeable Core Control Keys* Everest B Restricted Key Sections Part Number Description Price Each 35-425 Embossed control key blank 35-426 Unembossed control key blank CL-Series Key Blanks $7.10 Cut Keys 48-425 Embossed control key 48-426 Unembossed control key $14.00 Master Keys 49-425 Embossed control key 49-426 Unembossed control key $14.40 *Operating keys for Everest SL cylinders are the same as Everest SFIC operating keys. 35-310 Key Blanks DUPLICATION PROHIBITED Key Blanks, Best® Key Sections Part Number Description 35-310 Key blank, 6 or 7-pin Price Each J Specify keyway using B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H, JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB, TBD=TD, QB=Q. Order in multiples of 50 $3.30 Notes: Key stamping not available on 35-310 key blanks. Price Book 8 Effective April 4, 2020 • Rev. 04/20 365 Full Size Everest 29 Standard Key Blanks, Cut Keys, Master Keys CYLINDERS / KEYS / AUXILIARY KEYS & KEYING • Keys Ordered Separately Standard Front for S Family 35-270 Standard for Control Keys and all T Family keys. Optional for S Family 35-268 Operating 35-269 Control 6-Pin Control Standard markings unless otherwise specified. See Keys-18 for additional key stamping information. KEYS-8 Cylinders Full Size Everest 29™ Standard Key Blanks Description Part Number Standard embossed key 35-270 DO NOT DUPLICATE embossed key 35-268 DO NOT DUPLICATE unembossed key 35-272 Control key, DND embossed 35-269 Control key, DND, hotel function 35-267 Emergency key blank, DND 35-271 Everest 29 Shim, duplicating (Order in packs of 10) 40-225 Back of S Family All Except Open Sections 35-272 — $3.60 48-270 DO NOT DUPLICATE key 48-268 DO NOT DUPLICATE key, unembossed 48-272 Set-up key 48-034 Master key 49-270 Master key, DO NOT DUPLICATE 49-268 Master key, DO NOT DUPLICATE, unembossed 49-272 Control key DND std., non-factory system 48-269 Control key DND std., factory system 49-269 Control key DND, hotel function, non-factory 48-267 Control key DND, hotel function, factory system 49-267 Emergency key DND, non-factory system 48-271 Emergency key DND, factory system 49-271 7.20 0.60 Plain Both Sides 35-013 S Family Open Sections Back of All Except 35-013 T Family Restricted Sections — $9.40 $17.30 — 17.30 Price Book 8 366 7.20 6.10 35-005 Control Part Number Standard key $7.20 5.80 Standard Front Description Back of T35-269 Family Restricted Sections Order in multiples of 50 Full Size Everest 29 Standard Cut35-004 Keys XP Operating CL-Series Plain Both Sides 35-272 Effective April 4, 2020 • Rev. 04/20 17.30 SFIC Everest 29 Restricted Key Sections 35-264 Operating Keys 49-355 Control Keys CYLINDERS / KEYS / AUXILIARY 35-400 Key Blanks Keys Ordered Separately • KEYS & KEYING 49-400 Master Keys Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Small Format Interchangeable Core Keys, Everest 29 R Restricted Key Sections Part Number Description Price Each Key Blanks Embossed key blank (operating and SFIC control) 35-264 Unembossed key blank (operating and SFIC control) Cylinders 35-400 Order in multiples of 50 $7.20 Cut Keys 48-400 Embossed operating key 48-264 Unembossed operating key $16.20 Master Keys 49-400 Embossed master key 49-264 Unembossed master key 49-355 Embossed control key 49-000 Unembossed control key $16.20 Part Number Description CL-Series Everest SL Full Size Interchangeable Core Control Keys* Everest 29 R Restricted Key Sections Price Each Key Blanks 35-429 Embossed control key blank 35-430 Unembossed control key blank $7.20 Cut Keys 48-429 Embossed control key 48-430 Unembossed control key $15.70 Master Keys 49-429 Embossed control key 49-430 Unembossed control key $15.70 *Operating keys for Everest SL cylinders are the same as Everest SFIC operating keys. Price Book 8 Effective April 4, 2020 • Rev. 04/20 367 CYLINDERS / KEYS / AUXILIARY KEYS & KEYING • Keys Ordered Separately Classic Primus Keys, Classic Primus I.D. Cards Cut Keys Key Blanks 35-157 Front 35-15735-053 Front Front 35-053 Back Front of Both Back of Both 48-157, 49-157 48-157, 49-157 48-053, 49-053 48-053, 49-053 Back Front Front Front Front of Both PRIMUS PRIMUS Back of Both PRIMUS PRIMUS DO NOT DUPLICATEDO NOT DUPLICATE DO NOT DUPLICATEDO NOT DUPLICATE Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Classic Primus Key Blanks and Cut Keys Part Number Description Price Each CL-Series KEYS-10 Cylinders Key Blanks Order in multiples of 50 $8.40 35-157 Standard bow, embossed both sides 35-053 Standard bow, unembossed one side, “PRIMUS” logo on one side 35-171 Standard Bow, Stainless steel LP section key 55.90 35-172 Control Key, Standard Bow Stainless Steel, LP section only 55.90 35-116 Large bow, embossed both sides 35-115 Access bow, embossed both sides 35-158 Control key, standard bow, embossed both sides 35-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 35-159 Lockout key, standard bow, embossed both sides 13.70 13.20 13.20 Cut Keys 48-157 Standard bow, embossed both sides 48-053 Standard bow, unembossed one side, “PRIMUS” logo on one side 48-171 Standard bow, stainless steel LP section key 48-116 Large bow, embossed both sides 48-115 Access bow, embossed both sides 48-158 Control key, standard bow, embossed both sides 48-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 48-172 Control key, stainless steel LP section control key 92.10 48-159 Lockout key, standard bow, embossed both sides 20.90 20.90 80.10 26.70 20.40 Master Keys 49-157 Standard bow, embossed both sides 49-053 Standard bow, unembossed one side, “PRIMUS” logo on one side 49-171 Standard bow, stainless steel LP section key 49-116 Large bow, embossed both sides 49-115 Access bow, embossed both sides 49-158 Control key, standard bow, embossed both sides 49-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 49-172 Control key, stainless steel LP section control key 80.10 26.70 Level 40-061 1 40-065 1 Plus 40-062 2 Price Each Order in multiples of 50 $3.70 Price Book 8 368 20.90 92.10 Classic Primus I.D. Cards Part Number 20.90 Effective April 4, 2020 • Rev. 04/20 Classic Primus XP Keys, Classic Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING 35-157-XP 35-053-XPBack 35-157-XP 35-053-XP Front Front Front of Both Front Back of Both 48-157-XP, 49-157-XP 48-053-XP, 49-053-XP 48-157-XP, 49-157-XP 48-053-XP, 49-053-XP Back Front Front of Both Front Front PRIMUS PRIMUS DO NOT DUPLICATE DO NOT DUPLICATE PAT . NO. 7,159,424 PAT . NO. 7,159,424 CYLINDERS / KEYS / AUXILIARY Cut Keys Key Blanks Back of Both PRIMUS PRIMUS DO NOT DUPLICATE DO NOT DUPLICATE PAT . NO. 7,159,424 PAT . NO. 7,159,424 Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Classic Primus XP Key Blanks and Cut Keys Part Number Description Price Each Key Blanks Standard bow, embossed both sides 35-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side 35-171-XP Standard Bow, Stainless Steel LP section 55.90 35-172-XP Control Key, Standard Bow Stainless Steel, LP section only 55.90 35-116-XP Large bow, embossed both sides 35-115-XP Access bow, embossed both sides 35-158-XP Control key, standard bow, embossed both sides 35-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 35-159-XP Lockout key, standard bow, embossed both sides 13.70 KEYS-11 13.20 13.20 Cut Keys 48-157-XP Standard bow, embossed both sides 48-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side 48-171-XP Standard bow, stainless steel LP section key 48-116-XP Large bow, embossed both sides 48-115-XP Access bow, embossed both sides 48-158-XP Control key, standard bow, embossed both sides 48-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 48-172-XP Control key, stainless steel LP section control key 92.10 48-159-XP Lockout key, standard bow, embossed both sides 20.90 20.90 80.10 26.70 CL-Series 20.40 Master Keys 49-157-XP Standard bow, embossed both sides 49-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side 49-171-XP Standard bow, stainless steel LP section key 49-116-XP Large bow, embossed both sides 49-115-XP Access bow, embossed both sides 49-158-XP Control key, standard bow, embossed both sides 49-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side 49-172-XP Control key, stainless steel LP section control key 20.90 80.10 26.70 20.90 92.10 Classic Primus I.D. Cards Part Number Level 40-061-XP 1 40-065-XP 1 Plus 40-062-XP 2 Cylinders Order in multiples of 50 $8.40 35-157-XP Price Each Order in multiples of 50 $3.70 Price Book 8 Effective April 4, 2020 • Rev. 04/20 369 Everest Primus Keys, Everest Primus I.D. Cards CYLINDERS / KEYS / AUXILIARY KEYS & KEYING • Keys Ordered Separately 35-004 Embossed Everest Primus Key 35-012 35-005 Everest Primus Embossed Control Back of All Keys (except unembossed) Facility or Dealer ID Number PRIMUS PRIMUS DO NOT DUPLICATE Pat. 5,809,816 DO NOT DUPLICATE Pat. 5,809,816 001426 DO NOT DUPLICATE Pat. 5,809,816 Section Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Everest Primus Key Blanks and Cut Keys Cylinders Part Number Description Price Each Key Blanks 35-004 35-012 35-005 Standard bow, embossed one side 6-Pin Standard bow, unembossed Control Control key, standard bow, embossed one side 35-013 35-006 Order in multiples of 50 $8.90 Control key, standard bow, unembossed Lockout Lockout key, standard bow, embossed one side 35-019 14.10 Lockout key, standard bow, unembossed KEYS-12 Cut Keys 48-004 6-Pin Standard bow, embossed one side 48-012 48-005 Standard bow, unembossed Control Control key, standard bow, embossed one side 48-020 48-006 Control key, standard bow, unembossed Lockout 21.60 Lockout key, standard bow, embossed one side 48-019 Lockout key, standard bow, unembossed CL-Series Master Keys 49-004 6-Pin Standard bow, embossed one side 49-012 49-005 Standard bow, unembossed Control Control key, standard bow, embossed one side 49-020 Control key, standard bow, unembossed Everest Primus I.D. Cards Part Number Level Price Each 40-060 1 Order in multiples of 50 $4.50 Price Book 8 370 Effective April 4, 2020 • Rev. 04/20 21.60 Everest Primus XP Keys, Everest Primus XP I.D. Cards 35-012-XP 35-005-XP Everest Primus Embossed Control CYLINDERS / KEYS / AUXILIARY 35-004-XP Embossed Everest Primus Key Keys Ordered Separately • KEYS & KEYING Back of All Keys (except unembossed) Facility or Dealer ID Number PRIMUS PRIMUS DO NOT DUPLICATE Pat. 5,809,816 DO NOT DUPLICATE Pat. 5,809,816 001426 DO NOT DUPLICATE Pat. 5,809,816 Section Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Everest Primus XP Key Blanks and Cut Keys Part Number Description Price Each 35-004-XP 35-012-XP 35-005-XP Standard bow, embossed one side 6-Pin Standard bow, unembossed Control Control key, standard bow, embossed one side 35-013-XP 35-006-XP Order in multiples of 50 $8.90 Control key, standard bow, unembossed Lockout 35-019-XP Lockout key, standard bow, embossed one side Cylinders Key Blanks 14.10 Lockout key, standard bow, unembossed Cut Keys 6-Pin Standard bow, embossed one side 48-012-XP 48-005-XP Standard bow, unembossed Control Control key, standard bow, embossed one side 48-020-XP 48-006-XP KEYS-13 48-004-XP Control key, standard bow, unembossed Lockout 48-019-XP 21.60 Lockout key, standard bow, embossed one side Lockout key, standard bow, unembossed Master Keys 6-Pin Standard bow, embossed one side 49-012-XP 49-005-XP Standard bow, unembossed Control Control key, standard bow, embossed one side 49-020-XP CL-Series 49-004-XP 21.60 Control key, standard bow, unembossed Everest Primus XP I.D. Cards Part Number Level Price Each 40-060-XP 7 or 8 Order in multiples of 50 $4.50 Price Book 8 Effective April 4, 2020 • Rev. 04/20 371 CYLINDERS / KEYS / AUXILIARY KEYS & KEYING • Keys Ordered Separately Standard Front 35-199-XP Operating 35-273-XP Plain Both Sides 35-138-XP Control 35-215-XP Operating Standard Front 35-199 operating 35-273 Plain Both Sides 35-138 Control 35-215 Operating Back of All Except 35-199-XP 35-273-XP 35-216-XP Everest 29 Primus Keys, Everest 29 Primus I.D. Cards Back of All Except 35-199 35-273 35-216 Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Everest 29 Primus Key Blanks and Cut Keys Cylinders Part Number Description Key Blanks 35-199 35-215 35-273 Standard bow, embossed one side 6-Pin Standard bow, unembossed Control 35-216 Order in multiples of 50 $9.10 Control key, standard bow, embossed one side 35-138 Control key, standard bow, unembossed Lockout 35-218 KEYS-14 Price Each Lockout key, standard bow, embossed one side 14.40 Lockout key, standard bow, unembossed Cut Keys 48-199 6-Pin Standard bow, embossed one side 48-215 48-273 Standard bow, unembossed Control Control key, standard bow, embossed one side 48-014 48-216 Control key, standard bow, unembossed Lockout 48-218 22.20 Lockout key, standard bow, embossed one side Lockout key, standard bow, unembossed CL-Series Master Keys 49-199 6-Pin Standard bow, embossed one side 49-215 49-273 Standard bow, unembossed Control Control key, standard bow, embossed one side 49-023 Control key, standard bow, unembossed Everest 29 Primus I.D. Cards Part Number Level Price Each 40-060 7 or 8 Order in multiples of 50 $4.50 Price Book 8 372 Effective April 4, 2020 • Rev. 04/20 22.20 Everest 29 Primus XP Keys, Everest 29 Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING Plain Both Sides 35-138-XP Control 35-215-XP Operating Standard Front 35-199 operating 35-273 Plain Both Sides 35-138 Control 35-215 Operating CYLINDERS / KEYS / AUXILIARY Standard Front 35-199-XP Operating 35-273-XP Back of All Except 35-199-XP 35-273-XP 35-216-XP Back of All Except 35-199 35-273 35-216 Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information. Part Number Description Cylinders Everest 29 Primus XP Key Blanks and Cut Keys Price Each Key Blanks 35-199-XP 35-215-XP 35-273-XP Standard bow, embossed one side 6-Pin Standard bow, unembossed Control Control key, standard bow, embossed one side 35-138-XP Control key, standard bow, unembossed Lockout 35-218-XP Lockout key, standard bow, embossed one side 14.00 KEYS-15 35-216-XP Order in multiples of 50 $8.80 Lockout key, standard bow, unembossed Cut Keys 48-199-XP 6-Pin Standard bow, embossed one side 48-215-XP 48-273-XP Standard bow, unembossed Control Control key, standard bow, embossed one side 48-014-XP Lockout 48-218-XP 22.20 Lockout key, standard bow, embossed one side CL-Series 48-216-XP Control key, standard bow, unembossed Lockout key, standard bow, unembossed Master Keys 49-199-XP 6-Pin Standard bow, embossed one side 49-215-XP 49-273-XP Standard bow, unembossed Control Control key, standard bow, embossed one side 49-023-XP 22.20 Control key, standard bow, unembossed Everest 29 Primus XP I.D. Cards Part Number 40-060-XP Level Price Each 7 or 8 Order in multiples of 50 $4.50 Price Book 8 Effective April 4, 2020 • Rev. 04/20 373 Everest 29 Primus Keys, Everest 29 Primus I.D. Cards CYLINDERS / KEYS / AUXILIARY KEYS & KEYING • Keys Ordered Separately Everest B Keyway Family Primus XP Key Blanks and Cut Keys Part Number 35-421-XP Standard Bow, Embossed one side 35-422-XP Standard Bow, Unembossed 35-427-XP 35-428-XP Cut Keys 48-421-XP 48-422-XP 48-427-XP Cylinders 48-428-XP Master Keys 49-421-XP 49-422-XP 49-427-XP KEYS-16 49-428-XP Price Each Standard Bow, Embossed - Control (Everest SL - B keyway only) Standard Bow, Unembossed- Control (Everest SL - B keyway only) Order in multiples of 50 $8.80 Standard Bow, Embossed one side Standard Bow, Unembossed Standard Bow, Embossed (Everest 29 SL) Standard Bow, Unembossed (Everest 29 SL) 21.60 Standard Bow, Embossed one side Standard Bow, Unembossed Standard Bow, Embossed - Control (Everest SL - B keyway only) Standard Bow, Unembossed - Control (Everest SL - B keyway only) 21.60 Front 35-421-XP Back Front 35-422-XP Back 35-423-XP Back Front 35-424-XP Back Everest 29 R Keyway Family Primus XP Key Blanks and Cut Keys Part Number Description Price Each Key Blanks 35-423-XP Standard Bow, Embossed one side 35-424-XP Standard Bow, Unembossed 35-431-XP CL-Series Description Key Blanks 35-432-XP Cut Keys 48-423-XP 48-424-XP 48-431-XP 48-432-XP Master Keys 49-423-XP 49-424-XP 49-431-XP 49-432-XP Standard Bow, Embossed - Control (Everest 29 SL - R keyway only) Standard Bow, Unembossed - Control (Everest 29 SL) Order in multiples of 50 $8.80 Standard Bow, Embossed one side Standard Bow, Unembossed Standard Bow, Embossed - Control (Everest 29 SL - R keyway only) Standard Bow, Unembossed - Control (Everest 29 SL - R keyway only) 21.60 Standard Bow, Embossed one side Standard Bow, Unembossed Standard Bow, Embossed - Control (Everest 29 SL - R keyway only) Standard Bow, Unembossed - Control (Everest 29 SL - R keyway only) 21.60 Price Book 8 374 Front Effective April 4, 2020 • Rev. 04/20 Split Key Construction Keys, Special Keys 35-104 48-104 Key Blank Cut Key Everest® 35-008 48-008 Key Blank Cut Key 35-097 48-097 Hotel Cylindrical Standard Everest 29 Key Blank Cut Key 35-110 48-113 35-289 48-289 Classic Blank Classic Cut Everest Blank Everest Cut 35-111 48-114 35-231 48-039 Classic Blank Classic Cut Everest Blank Everest Cut 35-057 Split Key Construction Keys CYLINDERS / KEYS / AUXILIARY Classic KEYS & KEYING • Keys Ordered Separately Part Number Classic Everest Everest 29 Price Each Construction key, standard bow, embossed 35-104 35-008 35-097 $6.60 Construction insert 35-110 35-289 35-289 Construction insert, A85, AL85, D85, ND85, or H185 function 35-111 35-231 35-231 Description Extractor tool Cylinders Key Blanks 9.20 22.50 35-057 Cut Keys Construction key, standard bow, embossed 48-104 48-008 48-097 48-113 48-289 48-289 Construction insert, A85, AL85, D85, ND85, or H185 function 48-114 48-039 48-039 Notes: 9.20 KEYS-17 Construction insert 6.60 Split key construction keys are NOT available for interchangeable core cylinders. Split key construcion keys are ONLY available in L, Y, 0000 and ZZZZ Classic sections, C000 and D000 Everest sections and S000 and T000 Everest 29 sections. 35-250 35-251 L583-233-458 M504-271 CL-Series Special Keys Part Number Description Price Each $5.50 35-250 Emergency key, A40, AL40, D40, or ND40 function 35-251 Spanner key, A85, AL85, D85, ND85, or H185 function L583-233-458 mergency turn, L9040 function E (note: for L9040 with outside indicator, a small flathead screwdriver is used instead of an emergency turn) M504-271 Emergency key, F40 or S40 function 1.60 61-509 Emergency release key standard size, for occupancy deadbolts (Includes one key, ring, and instruction tag.) 11.30 61-510 Emergency release key large, for occupancy deadbolts (Includes one key, ring, and instruction tag.) 21.50 19.70 Price Book 8 Effective April 4, 2020 • Rev. 04/20 375 CYLINDERS / KEYS / AUXILIARY Keys Ordered Separately • KEYS & KEYING 35-223 35-224 35-227 35-228 Presentation Keys 35-229 Presentation Keys Part Number Description Price Each KEYS-18 Cylinders Key Blanks 35-223 5-Pin Velvet case with 2 standard bow Classic gold plated blanks, embossed both sides 35-224 6-Pin 35-227 5-Pin 35-228 6-Pin 35-229 6-Pin Velvet case with 1 Everest gold plated blank 48-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides 48-224 6-Pin 48-227 5-Pin 48-228 6-Pin 48-229 6-Pin Velvet case with 1 Everest gold plated key 49-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides 49-224 6-Pin 49-227 5-Pin 49-228 6-Pin $184.00 Velvet case with 1 large bow Classic gold plated blank, embossed both sides Cut Keys $201.00 Velvet case with 1 large bow Classic gold plated key, embossed both sides Master Keys 49-229 6-Pin CL-Series Note: Velvet case with 1 large bow Classic gold plated key, embossed both sides Velvet case with 1 Everest gold plated key Customized presentation keys require high-resolution logo file in “tiff” or “eps” format. Price Book 8 376 Effective April 4, 2020 • Rev. 04/20 $217.00 KEYS & KEYING • Key Stamping CYLINDERS / KEYS / AUXILIARY Stamping Area DO NOT DUPLICATE 765352 AA1 C Key Symbol Bitting Key Section (Standard on Everest and Primus keys for MK systems) (Not stamped on Everest or Primus keys) Key Stamping Notes Visual Key Control (VKC) with standard key symbols Non-standard code Stamp key symbol on key 1, 2 Everest & all Primus (furnished as standard) All Standard & all Primus Non-standard code Classic Standard Stamp key “Do Not Duplicate” Everest C or Everest 29 S Family Standard Everest B or Everest 29 R Family Use 35-002 blanks (C) or 35-268 (S) 3 4, 5 Delete key section from bow 9 Everest D, Everest 29 T Family, all Primus All Standard & all Primus Classic and Everest Standard, Classic and Everest Primus/Primus XP, Everest Primus Classic Standard Everest & all Primus Stamp with Serial Number Notes: 50-217 Price Each Key $2.90 N/C — 50-003 7.60 per side XQ06-878 N/C — Die Stamp Information 50-219 5.20 per side Delete key section 50-220 5.20 Delete key combination 50-221 2.90 (furnished as standard) — N/C Classic Standard (furnished as standard) — N/C 6 Everest C or Everest 29 S Family Standard Stamp key bitting 50-233 7.60 7 Restricted Everest (B, D), Everest 29 (R, T) Stamp Key with Serial Number 50-229 3.00 1.) Maximum of 6 characters for VKC, Non Standard Code 2.) Specify “delete key symbol on key” if VKC is not required. Available at no charge. 3.) Everest B and Everest 29 R Family keys are stamped “RESTRICTED”. 4.) Contact product support, new dies are subject to a one time charge that is quoted through RFQ process; all new dies remain the property of Schlage Lock Company. 5.) Only available on unembossed keys. 6.) Not available on Primus or Everest B and D or Everest 29 R and T Family keys or on keys with key symbols stamped (VKC). 7.) Serial Number is a Straight Numerical Sequence comprised of 8 digits including leading zeros.. 8.) Sequential stamping will be charged as non-standard code (example: AA1-1, AA1-2, etc.). 9.) When selecting VKC (50-217) with DHI standard key symbols for Classic Standard systems, Delete Combination (50-221) will be included at no charge. When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable. Stand alone 50-XXX Charges will be separate lines and priced separately. Price Book 8 Effective April 4, 2020 • Rev. 04/20 377 CL-Series Stamp bitting (furnished as standard) Part Number KEYS-19 Classic Standard DO NOT DUPLICATE Bitting not stamped Specify 1, 9 1, 5, 8 Custom die stamp Key Type Cylinders Description CYLINDERS / KEYS / AUXILIARY Cylinder Stamping • KEYS & KEYING AA1 AA1 Cylinder Stamping Notes Visual Key Control (VKC) with standard key symbols or non standard codes 1 Key Type Specify Classic Standard, Everest C & D, Everest 29 S &T Standard, (Not available for Primus or Primus XP) Everest B Family and Everest 29 R (SFIC) Concealed Key Control (CKC) with standard key symbols or Non-standard codes 1 Classic Standard, Everest C & D, Everest 29 S &T Standard, Primus and Primus XP cylinders Everest B Family and Everest 29 R (SFIC) Price Each 50-002 $7.00 — Stamp key symbol or non-conventional code on side (CKC) of core Note: Maximum of 6 characters for VKC, Non Standard Code or Serial number stamping. When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable. Stand alone 50-XXX Charges will be separate lines and priced separately. Price Book 8 378 Part Number Stamp key symbol or nonconventional code on face (VKC) or Cylinder or core. CL-Series KEYS-20 Cylinders Description Effective April 4, 2020 • Rev. 04/20 50-216 — N/C $7.00 N/C Full Size Construction Core Program KEYS & KEYING • Construction Core Program CYLINDERS / KEYS / AUXILIARY Full Size Construction Core Program Temporary construction cores may be ordered with full size interchangeable core locks, mortise cylinders and rim cylinders. These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge (50-231). See Terms & Conditions for more information. Features: • 6-Pin C keyway. • Construction cores will be finished with an orange face. • Back of each core is marked with the letter that identifies the keyed alike group: A, B or C. • Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately. • A control key is required to install and remove construction cores. Control keys must be ordered separately. If a control key is not ordered, one will be supplied at a charge of $16.30. • Construction cores may be returned for credit. Contact your Schlage representative for return authorization. Credit is issued upon receipt of cores at our factory. 23-030-ICX 48-101-ICX 48-056-ICX Cylinders CONTROL Specify Construction core 48-101-ICX Cut key for construction phase (order separately) 48-056-ICX Cut control key (order separately) 50-231 Non-refundable handling charge (per core) Notes: New jobs: Specify “ICX” Existing jobs: Specify “ICA”, “ICB” or “ICC”. Section 23-030-ICX Description C Part Number Price Each $74.00 KEYS-21 Full Size Construction Core Program 8.40 16.60 10.70 CL-Series To order mortise and rim cylinders with full size construction cores for a new job, suffix ICX to non-Primus cylinder number. Example: 30-008 ICX. For existing construction core combinations, specify ICA, ICB, or ICC. Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. Other Schlage projects in the same area using the same or different contractors may use the same key. Where a higher degree of security is desired, order a set of Standard or Primus® cores in 606 or 626 finish keyed alike to a random combination. Specify “KA Group 1”. Such cores would not be assessed the handling fee and are not returnable to Schlage. Example: Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and one control key. The following charges apply to this order: 1. 23-030-ICX construction cores (150 units). 2. 48-101-ICX cut keys (20 units). 3. 48-056-ICX cut control key (1 unit). 4. 50-231 Non-refundable handling charge (150 units-one per core ordered). Upon return of the cores to the factory the distributor will be credited for the following: 1. 23-030-ICX construction cores (150 units). There is no credit for the keys or handling fee. Price Book 8 Effective April 4, 2020 • Rev. 04/20 379 Small Format Construction Core Program CYLINDERS / KEYS / AUXILIARY Construction Core Program • KEYS & KEYING Small Format Construction Core Program Temporary construction cores may be ordered with small format interchangeable core locks, mortise cylinders and rim cylinders. These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge (50-231). See Terms & Conditions for more information. Features: • Best® A keyway • Construction cores have a green or brown face. Each color is keyed alike to its own operating and control key. • Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately. If construction operating keys are not ordered, one 48-310 cut key will be provided per order at a charge of $8.70 unless specifically stated to not include. • A control key is required to install and remove construction cores. Control keys must be ordered separately. If a control key is not ordered, one will be supplied at a charge of $16.30. • Construction cores may be returned for credit. Contact your Schlage representative for return authorization. Credit is issued upon receipt of cores at our factory. • Small format disposable cores may not be returned for credit. 48-310 48-311 DUPLICATION PROHIBITED DUPLICATION PROHIBITED CONTROL A A Small Format Construction Cores Part Number Description 48-310 Cut key for construction phase (order separately) 48-311 Cut control key (order separately) 80-035 Construction core 50-231 Non-refundable handling charge (per core) Specify Schlage assigns the color for each order at random. If a specific color is required, specify “GRN” for green and “BRN” for brown cores. Small Format Disposable Cores Part Number M204-152 Price Each Description $6.30 Disposable plastic construction core Example: Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and one control key. The following charges apply to this order: 1. 80-035 construction cores (150 units). 2. 48-310 cut keys (20 units). 3. 48-311 cut control key (1 unit). 4. 50-231 Non-refundable handling charge (150 units-one per core ordered). Upon return of the cores to the factory the distributor will be credited for the following: 1. 80-035 construction cores (150 units). There is no credit for the keys or handling fee. Price Book 8 380 Price Each $9.00 16.80 45.00 10.70 M204-152 CL-Series KEYS-22 Cylinders 80-035 Effective April 4, 2020 • Rev. 04/20 Contract Master Keying, Contract Construction Keying, Other KEYS & KEYING • Keying Charges Part Number Description 50-210 Cylinder Master keyed (MK), grand master keyed (GMK), Emergency Master keyed (EMK), and Single keyed (SKD) groups (charge does not apply to interchangeable core) — Interchangeable core Master keyed (MK), grand master keyed (GMK), and Single keyed (SKD) groups Note: Price Each $20.70 N/C The Schlage Master Key Department determines and makes the final decision in the selection and use of key sections. 100% Expansion is allowed for new master key systems unless. Contract Construction Keying (CK)/Split Key Construction Keying Part Number Description 50-211 $12.20 Cylinder Construction keyed (CK) Notes: Price Each CYLINDERS / KEYS / AUXILIARY Contract Master Keying Construction keyed cylinder charges are in addition to master keying charges. Pack Keys Individual (PKI) 60-000 packing is included at no extra charge. Cylinders Construction keying not available with Primus cylinders or interchangeable cores. Construction cores may be ordered for Interchangeable core locks, mortise cylinders or rim cylinders for use during construction. See Construction Core Program). Split Key construction keying requires 6 pin cylinders. Construction master keys must be ordered separately Extractor tool (35-057) will be added to all split key construction key orders unless specifically notes to exclude. Charge for 35-057 is $22.50. Other Keying (Non-Master Keyed) Description — Cylinder keyed different (KD) or keyed alike to a Schlage selected combination (KA) in sets of 2 or more, include FSIC. — Cylinder 0-bitted or 1-bitted, as applicable* 50-001 Price Each N/C N/C Standard and Primus cylinder keyed to a specified combination * KEYS-23 Part Number $10.30 CL-Series Standard non-IC cylinders: Available 0-Bitted. 1-Bitted is not available and if specified, 0-bitted will be furnished. Standard IC cylinders: Furnished 1-bitted. 0-Bitted is not available and if specified, 1-bitted will be furnished. Primus cylinders: All Furnished 0-bitted. 1 bitted is not available and if specified, 0-bitted is furnished. When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable. Stand alone 50-XXX Charges will be separate lines and priced separately. Price Book 8 Effective April 4, 2020 • Rev. 04/20 381 KEYS-24 Cylinders CYLINDERS / KEYS / AUXILIARY Keying Charges • KEYS & KEYING Residential Master & Construction Keying Residential Master Keying (RMK) and/or Residential Construction Keying Qualifications: • Residential projects. • RMK and/or RCK must be specified on the order. • Systems are available in 5-Pin C keyway only. • Systems cannot be combined with Contract Master Key systems. • Two levels of keying maximum (Change Key and Master Key levels only). • Maison keying allowed. • Door detailing and labeling allowable as listed below. Residential Master Keying (RMK) Part Number Description Price Each 50-223 Cylinder Residential Master keyed (RMK) $2.60 49-100 Residential Master Key - Not offered for commercial products 10.80 Residential Construction Keying (RCK)/Lost Ball Construction Keying Part Number 50-224* 48-100 Notes: Description $2.60 Cylinder Residential Construction keyed (RCK) 6.20 Residential Construction Master Key Lost ball construction device is triggered by the highest level permanent key unless otherwise specified. CL-Series Change keys packed in envelopes and packed in lock box. PKI packing available at no additional charge. Residential Construction keying charges are in addition to Residential Master keying charges. When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable. Stand alone 50-XXX Charges will be separate lines and priced separately. Price Book 8 382 Price Each Effective April 4, 2020 • Rev. 04/20 Custom Presentation Keys, Homeowners Document Folders KEYS & KEYING • Keying Charges MS-J175 CYLINDERS / KEYS / AUXILIARY 35-135-C MS-J175 35-135-C Builder Lo go HOMEO WNER DOCUM ENTS Custom Presentation Keys Part Number Description 35-135-C* Large bow custom logo key (minimum order quantity: 400 keys) 50-230 Die charge for key customization (one time charge on initial order) $3.10 260.00 net Send Building Partnerships orders to address given at bottom of page. Large bow custom logo keys are available as key blanks only. Cut keys are not available. Customized presentation keys require high-resolution logo file in “tiff” or “eps” format. Cylinders * Notes: Price Each Homeowners Document Folders Description Price Each MS-J175* Document folder, plain $6.30 MS-J175* Document folder, customized (minimum customized order quantity: 100 folders) 10.50 * KEYS-25 Part Number Send Building Partnerships orders to address given at bottom of page. Customized presentation keys require high-resolution logo file in “tiff” or “eps” format. CL-Series Send Building Partnerships orders to: Trade Marketing Schlage Lock Company Residential Customer Service 2119 E. Kansas City Rd. Olathe, KS 66061 FAX: (800) 366-5625 email: res_contact_center@allegion.com Price Book 8 Effective April 4, 2020 • Rev. 04/20 383 CYLINDERS / KEYS / AUXILIARY Keying Charges • KEYS & KEYING Bitting Lists, KSC Key Charts Bitting Lists (Transcripts) Part Number Description Price Each $240.00* 50-123 Bitting list for factory master keyed products (requires written authorization from end-user). 50-120 Establish new master key system for field master keying (one-time charge). Each bitting is assessed a 50-121 or 50-122 charge below. 50-121 New master key bitting for cylinders keyed in the field. 50-120 charge assessed if this bitting establishes a new system. 4.60 50-122 New change key bitting for cylinders keyed in the field. 3.60 * 35.80 Can be used for SiteMaster download (keying and bitting details) if ordered as such. Please specify SiteMaster download file if applicable in the details column. Information reequired: is Structure or original order number, end user name, city and state (used to verify the structure number). Also required is an email address for the end user, include their full name to address the email and a “Letter Of Authorization”. Cylinders KSC Generic Key Charts Part Number Description Price Each 50-600 6-Pin system with 4,096 change combinations furnished $1,331.00 50-700 7-Pin system with 16,384 change combinations furnished $1,724.00 Notes: KSC systems are for dealer or end-user maintained master key systems. KSC systems cannot be converted or tied to factory established or factory maintained systems. KSC systems are furnished with instruction manual and binder. CL-Series KEYS-26 Number of valid/ usable change combinations provided in 50-600 is not guaranteed due to system constraints. 4,096 is the theoretical number possible, actual number of valid/ usable changes will vary. When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable. Stand alone 50-XXX Charges will be separate lines and priced separately. Price Book 8 384 Effective April 4, 2020 • Rev. 04/20 KEYS & KEYING • Keying Charges Keys Ordered with Locks or Cylinders, PKI Part Number Description Price Each 50-214 Extra cut Primus keys ordered with lock or cylinder. 50-215 Extra cut standard bow Classic or Everest C or Everest 29 S Family keys ordered with lock or cylinder 4.40 50-227 Extra cut large bow or access bow keys ordered with lock or cylinder 6.90 50-228 Cut large bow or access bow keys substituted for standard bow Classic keys 3.20 50-232 Extra cut Classic restricted families, Everest B Family, Everest D, Everest 29 R and Everest 29 T family keys ordered with lock or cylinder. 8.40 $11.50 Pack Change Keys Independently (PKI) Part Number Description Price Each 60-000 Pack change keys independently (PKI) for split key construction keying 60-001 Pack change keys independently (PKI) N/C CYLINDERS / KEYS / AUXILIARY Keys Ordered with Locks or Cylinders (2 std bow keys provided with keyed locks or cylinders) $0.62 Cylinders KEYS-27 CL-Series When ordered with a lock or cylinder, 50-XXX charges will be added as an option to the product when applicable. Stand alone 50-XXX Charges will be separate lines and priced separately. Price Book 8 Effective April 4, 2020 • Rev. 04/20 385 CYLINDERS / KEYS / AUXILIARY SITEMASTER 200® • KEYS & KEYING ® Key System Management Software Description Part Number Price Each Windows Full Version on CD SM01-391 $2,676.00 Windows Full Version with Lockshop Enhancement SM01-392 2,959.00 Cylinders Notes: SiteMaster manuals have been replaced by an extensive help menu on the CD SiteMaster comes without any information loaded. The download file needs to be ordered (see Part Number 50-123 Page 347 ordering instructions) and Schlage is not responsible to load personnel information, etc. Forms Key Record Form (order in multiples of 50) Part Number Price Each SM01-210 $0.50 CL-Series KEYS-28 Description Download Free Demonstration Software at allegion.com/us Price Book 8 386 Effective April 4, 2020 • Rev. 04/20 Sample Letter of Authorization For All Restricted Key Products KEYS & KEYING May 1, 2003 End User Letterhead - REQUIRED District 10 Schools 555 Main Street End User City, State 55555 (555) 555-5555 Date - REQUIRED To: Schlage Dealer 100 East Avenue Dealer City, State 11111 Dealer Name RECOMMENDED RE: District 10, Jones Elementary School Facility Name - REQUIRED Include Registry Number & Facility Code (stamped on keys) for existing key systems CYLINDERS / KEYS / AUXILIARY DISTRICT 10 Please consider this authorization to ship product for the above-referenced project. Cylinders Jones Elementary School is to be keyed using a new Everest D Restricted Key System. For security reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master keyed products, however, can be shipped directly to the site. This letter authorizes Schlage to ship our restricted products to the following addresses: Authorized ShipTo Addresses REQUIRED CL-Series Master Keys, Change Keys, Control Keys, and Key Blanks Attn: Locksmith District 10 Lockshop 1201 Fifth Avenue End User City, State 55555 KEYS-29 Master Keyed Products, Construction Keys, Locks Less Cylinders, and Locks with Construction Cores Attn: Building Project Manager District 10 Schools 555 Main Street End User City, State 55555 These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility. We understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to add, remove, or change authorized shipping locations. Sincerely, End User Representative Facilities Manager End User Representative Signature REQUIRED Letter may be mailed or faxed to Schlage Schlage Restricted Order Processing 3899 Hancock Expressway Colorado Springs, CO 80911 Price Book 8 Effective April 4, 2020 • Rev. 04/20 387 KEYS & KEYING • Primus Checklist CYLINDERS / KEYS / AUXILIARY PRIMUS AND EVEREST PRIMUS ORDERING CHECKLIST TO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDS IMPORTANT NOTES To expedite processing of all Primus orders, it is highly recommended that Primus products be ordered separately For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless Otherwise Specified For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless Otherwise Specified PRIMUS EVEREST PRIMUS FOR LEVEL SEVEN Cylinders FOR LEVEL ONE 3 3 The Distributor’s Primus number MUST be provided The Sequence number MUST be provided FOR LEVEL ONE PLUS KEYS-30 3 3 3 CL-Series 3 3 3 3 The Distributor’s Primus number MUST be provided The Locksmith’s Facility code MUST be provided The Keyway MUST be provided The Distributor’s Primus number MUST be provided The Sequence number MUST be provided The Locksmith number MUST be provided FOR LEVEL EIGHT The Dealer’s Primus number MUST be provided The Sequence number and/or Section MUST be Provided 3 3 The Distributor’s Primus number MUST be provided The Keyway MUST be provided FOR LEVEL NINE FOR LEVELS THREE & FOUR 3 3 3 FOR LEVEL TWO 3 3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card An Original Facesheet MUST accompany all succeeding orders The Primus number MUST be indicated on the Facesheet ALL fields on the Facesheet MUST be completed where applicable 3 3 3 3 Orders Originating a System MUST include both an Original Facesheet and a Signature Card An Original Primus Facesheet MUST accompany all succeeding orders The Primus number MUST be indicated on the Facesheet ALL fields on the Facesheet MUST be completed where applicable All Primus Orders & Supporting Documentation Should be Sent To: Schlage Attn: Primus Order Processing 3899 Hancock Expressway Colorado Springs, CO 80911 Price Book 8 388 Effective April 4, 2020 • Rev. 04/20 LINE ITEM QTY PRODUCT Key/Label Instructions Lock Details Items Ordered FINISH OUTSIDE HAND (Only one hand per line item) QTY DESIGN Heading FINISH INSIDE Customer Name and Address: Order Written By: DESIGN Mark Cartons: Shipping Instructions: For Further Information Contact: Name: Phone: Fax: Account No.: Quote #: MASTER KEYED ORDER DOOR # KEY Symbol(s) LATCH MK Symbol(s) STRIKE DR THK Enter door thickness if not standard Ship to: Date: P.O. #: EXT Enter when door thickness is greater/ equal to 2˝ DIM Dimension for mortise cylinder, blocking ring, etc. Please provide as complete and accurate as possible so we can provide what you need for your Key System This form must be attached to the MASTER KEY SYSTEM SUMMARY FORM MS-I100 Page 1 of ___ ADDITIONAL DETAILS Excel Soft copy - Print Instructions: To avoid printing more sheets than needed, Select, from the print screen select , then select from ___to___& click OK. LINE ITEM QTY PRODUCT Key/Label Instructions Lock Details Items Ordered DESIGN FINISH OUTSIDE HAND (Only one hand per line item) QTY DESIGN FINISH Heading INSIDE DOOR # KEY Symbol(s) LATCH MK Symbol(s) STRIKE DR THK Enter door thickness if not standard EXT Enter when door thickness is greater/ equal to 2˝ DIM Dimension for mortise cylinder, blocking ring, etc. MS-I150 Page 2 of ___ ADDITIONAL DETAILS MASTER KEY SYSTEM SUMMARY This form must be attached to the Master Key Order form and P.O. Please provide as complete and accurate as possible so we can provide what you need for your Key System. Job Name Account No. Address City / State P.O.# Country For detailed instructions on how to complete this form please refer to pages 4 & 5 System Overview o o New o Attached Dealer Specified Combinations Existing (provide info below) Registry # __________________________________________ Structure or Factory Order # _____________________________________ 1. Select System Falcon Schlage o Standard o Schlage C o Restricted * o Interchangeable Core A2 o Interchangeable Core A4 o Classic o Classic Primus * Everest ® o B (Small Format IC, Restricted *) o C (Open) o Primus * o D (Restricted *) ® o Primus * ® Everest 29 key sections are backwards compatible to Everest Everest 29 ™ keyways and have the following relationships: o R (Small Format IC, Restricted *) o S (Open) o Primus * o T (Restricted *) o Primus * R family sections > B family keyways S family sections > C family keyways ® T family sections > D family keyways ® Construction Keyed Type o 5-pin o 6-pin o 7-pin See compatibility chart on page 5 Keyway Specified **: o Yes Full Size Construction Cores o o ICA No o ICB o ICC (Schlage Only) Small Format Construction Cores o Brown o Green Construction Keyed Type ** = The Commercial Master Key Department makes the final decision in the selection of key sections o Falcon o CK (BOK) o Lost Ball o Schlage o CK (Split) o RCK ( 5-Pin C only ) 1 of 5 MS-I200 2. Select Keys & Key Stamping Change Keys No. Of Keys per Symbol No. Of Keys per Cylinder Type o Standard Bow o Standard Bow o Access Bow (Unembossed) o Large Bow (Schlage Only) Key Stamp Details o Keyset Symbol o Do Not Duplicate o With Custom Die (DND) (Specify) o Non-standard Code (Specify) Change Key Packaging and Shipping Instructions *** = Furnished standard at no charge with Split-Key construction keying Pack Keys Independently (PKI) of Lock or Cylinder *** o Yes o No If PKI, ship change keys to: o Dealer o Other o See Primus Facesheet 3. Select Cylinder Stamping Cylinder Stamp Details o With Industry Standard Key Symbol o Non-Standard Code (Specify) Cylinder Stamping Location o Plug Face (N/A in Primus) - VKC o Concealed (N/A in Falcon STD) - CKC 2 of 5 MS-I200 4. Select Key Quantities Level Qty. Per Master Key Symbol (s) Total Quantity GGM GM MK or RMK Control Emergency Others Ship Master Keys To: o Dealer o See Primus Facesheet Special Function o Other Qty. Per Qty. Per RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only) CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only) Extractor Tools **** Small Format Construction Core Keys Small Format Construction Core Control Keys **** = Use with Construction Keying 5. Master Key Future Expansion List Future MK Symbols Example: 3 MK………o GGM GM MK MK MK MK Others Approx. # of Change Key Symbols Under Each Future MK BJ, BK 40 each o o o o o o o 6. Operating Instructions (Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders) Cross Keyed Cylinder is operated by these change keys Cross Keyed Cylinder X X X X X X X X 3 of 5 is operated by these change keys MS-I200 7. Instructions and Compatibility General Information If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer Service prior to placing the order: Tel. 1-877-671-7011 Fax 1-800-452-0663 • Only one structure may be ordered on the same purchase order • Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families • Classic Primus refers to Primus Obverse and Primus Quad key section families Section 1: Select System Full Size Construction Cores • Schlage only Small Format Construction Cores • 7-pin only for Schlage • 6- and 7-pin for Falcon CK (Split) • 6-pin for Schlage and Falcon • Split key construction keying is not available for Classic Primus or Everest 29 Primus RCK (Lost Ball) • 5-pin (C keyway) only for Schlage • 5-, 6-, and 7-pin for Falcon System Selection • Refer to the compatibility chart Section 2: Select Keys and Key Stamping Stamp Details • Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys • For custom die, attach RFQ approval for Schlage Section 3: Select Cylinder Stamping Type • For cylinder type refer to the compatibility chart Keyway (specify) • Schlage Commercial’s default key section for new Master Key Systems is Everest™ S145 4 of 5 MS-I200 Section 4: Key Quantities Level • Unless otherwise specified, the control key has the same cut as the highest-level key in the system (Except SFIC systems) Special Function • Construction keys are not furnished unless specified Change Keys • Unless otherwise specified 2 change keys are furnished per lock or cylinder Section 5: Master Key Future Expansion • Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols Section 6: Operating Instructions • Cross keying reduces the security and expansion of key systems • Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders Compatibility Chart 7 Pin Split Block O-Key Lost Ball Tempe Core X X 5 Pin 6 Pin X X X Everest 29 S X X X Everest 29 T X X X Key A2 A4 0.025 0.018 Schlage Classic Everest 29 R X X Classic Primus (XP) X X Everest 29 Primus (XP) X X X Falcon Open X X X X X X Restricted X X X X Schlage C X SFIC Open X X X X X SFIC Restricted X X X X X X X 5 of 5 MS-I200 IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME: 29 MS-E120 Ingersoll RandAllegion Security Technologies Schlage Attn.: Primus Order Processing 3899 Hancock Expressway Security, CO. 80911 ©©2014 2009Allegion Ingersoll Rand MS-E120 Rev. MS-E120 Rev.3/14 6/09 PRIMUS Signature Card ® For Internal Use Only Primus# Order# G/Z/E S/M Level 3, 4, and 9 Order Authorization THIS SIGNATURE CARD ESTABLISHES AUTHORIZATION TO PURCHASE ADDITIONAL PRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INST ALLED AT THE ADDRESS BELOW. THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER – FAXED COPIES NOT ACCEPTABLE – PRIMUS SECURITY LEVEL: 3U (no exclusivity) 3G (2-digit zip exclusivity) Classic 4Z (time exclusivity) 4N (nationwide exclusivity) 9U (no exclusivity) 9G (2-digit zip exclusivity) Keyways Everest 9Z (time exclusivity) 9N (nationwide exclusivity) 29 Keyways PROJECT INFORMATION Project Name (please print or type) Street Address (no P.O. Box) City State Zip Code AUTHORIZED OWNER SIGNATURE(S): If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authority able to control other signers on this form. 1. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date State Zip Code State Zip Code State Zip Code State Zip Code State Zip Code Phone Number 2. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number 3. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number 4. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number 5. Name (please print or type) Street (no P.O. Box) Title or Position City Signature Date Phone Number — OVER — MS-E130 DEALER OR LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE) Dealer or Locksmith Account # Primus # Address (no P.O. Box) City Dealer or Locksmith Company Name Phone Number State Zip Code Contact 2 (Please print or type) Fax Number Contact 2 Signature Contact 1 (Please print or type) Contact 1 Signature to Effective From: Date Date Owners Authorization By (Please print or type) Owners Authorization Signature Date SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility for validating the owner’s signature as identified on the Primus Signature Card before ordering the material. SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing additional Primus product or duplicating keys. Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send with letter requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distributors and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of this card will not be accepted. Please mailthe theoriginal original copy Please mail copy to: to: IR Schlage Schlage Attn:Master Key Control Department Attn.: Key Control Department 3899 Hancock Expressway 2315 Briargate Parkway, Suite 700 Colorado Springs, COCO80920 Colorado Springs, 80911 – FAXED COPIES WILL NOT BE ACCEPTED – © 2002 Ingersoll-Rand MS-E130 Rev . 8/05 Rev. MS-E130 3/14 CL CL-Series CYLINDERS / KEYS / AUXILIARY Exploded View - CL1000PB Cylinders Lock mounting screws Lock body Cylinder retaining screw Spacers Cylinder housing Keys 6-Pin cylinder Bar strikes Price Book 8 Effective April 4, 2020 • Rev. 04/20 407 CL-1 Strike mounting screws Keys Cylinders CYLINDERS / KEYS / AUXILIARY CL CL-2 Common Pricing Information 1. Locks are furnished with standard features unless otherwise specified. 2. Door thickness is 1-3/4" unless otherwise specified. 3. Split finishes and designs will be priced at the highest list price of the design and/or finish. 4. Engineering specials are denoted by a part number beginning with “X”. 5. 6 denotes a lock or part that requires an extended lead time. 6. I denotes a handed product and requires handing to be specified. 7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus cylinders. See Terms and Conditions for ordering information and requirements. 8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the specific requirements. 9. Keyway must be specified for keyed functions and cylinders. If not specified, default keyway will be S123 for KA, KD and 0-bitted product and S145 for Factory managed masterkey systems. 10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specified or excepted by notation. 11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately. 12. Locks specified C keyway and KD will receive 6 pin cylinders keyed 5 pin with 5 pin keys. Locks specified 0-bitted will receive 6 pin cylinders with 6 pin keys. 13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specified. If 0-bitted is selected, the order will be entered as 1-bitted. This does not apply to FSIC Primus® cores. 14. Standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be entered as 0-bitted. 15. Available plug face finishes are 606 and 626. For brass or bronze finish colors, the plug face finish is 606. For chrome, nickel or stainless steel finish colors, the plug face finish is 626. 16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge appropriate for the cylinder/key type Price Book 8 408 Effective April 4, 2020 • Rev. 04/20 CL Introduction CYLINDERS / KEYS / AUXILIARY Table of Contents Product Identification CL 100 PB Cylinder Suffix PB = 6-Pin Cylinder R = Full Size Interchangeable Coe G = Everest 29 Patented SFIC Function (See examples below) 100 = Door Lock 154 = Primus® UL437 Listed Door Lock 174 = Primus® Controlled Access Door Lock 200 = Drawer Lock 254 = Primus® UL437 Listed Drawer Lock 274 = Primus® Controlled Access Drawer Lock Finish Codes and Descriptions Lock Series Description Bright Brass Satin Chromium Plated Keys Code 605 (US 3) 626 (US 26D) Cylinders Complete Locks CL-4 CL-Series: Conventional Offering. . . . . . . . . . . . . . . . . . . . . . . . . . CL-4 CL-Series: Full Size Interchangeable Core Offering . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-5 CL-Series: Small Format Interchangeable Core Offering . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-6 Options CL-7 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-7 Non-Standard Door Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-7 Special Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-7 Parts CL-8 Trim Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Screws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Drivers and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Cam Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Ratchet Lock Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Trim Collar Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CL-8 Complete Cylinders See Cylinders Section Forms & Examples How To Order Certification Bar Strike Cylinder Door Range Keys CL-3 Standard Features ANSI A156.11, 1996, Series 4000, Grade 2 CL100-Series 1" throw; CL200-Series 3/4" throw 1/2" Bar strike and 1/4" bar strike 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD) Spacers and strikes will accommodate doors 7/8", 1", and 1 1/8" thick Two nickel silver cut keys per lock, 6-pin, S123 section** Price Book 8 Effective April 4, 2020 • Rev. 04/20 409 CYLINDERS / KEYS / AUXILIARY CL • Complete Locks CL100PB Conventional Offering CL200PB CL-Series Finishes 605 Function Description 626 Cylinders Keyed CL100PB Door cabinet lock, 6-pin cylinder, 1" bolt throw CL200PB Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw Open Restricted $152.00 $170.00 CL-Series: Primus XP/ Primus Controlled Access Primus cylinders are offered for sale through specific channels of distribution based on security levels See Terms & Conditions for more information Finishes 605 CL-4 Keys Function Description 626 Keyed CL174PB Door cabinet lock, 6-pin cylinder, 1" bolt throw CL174PB-XP Door cabinet lock, 6-pin cylinder, 1" bolt throw CL274PB Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw CL274PB-XP Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw $179.00 CL-Series: Primus XP/ Primus High Security UL 437 Primus cylinders are offered for sale through specific channels of distribution based on security levels. See Terms & Conditions for more information. Finishes 605 Function Description 626 Keyed CL154PB Door cabinet lock, 6-pin cylinder, 1" bolt throw CL154PB-XP Door cabinet lock, 6-pin cylinder, 1" bolt throw CL254PB Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw CL254PB-XP Drawer cabinet lock, 6-pin cylinder, 3/4" bolt throw Notes: $207.00 Keying options: see Keys & Keying. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms & Conditions for more information. Primus locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $17.40 per cylinder. Price Book 8 410 Effective April 4, 2020 • Rev. 04/20 Complete Locks • CL Full Size Removable Core Offering CL920R CL888R CYLINDERS / KEYS / AUXILIARY CL777R CL-Series: Full-Size Interchangeable Core Finishes Function Description 605 626 Keyed Door cabinet lock, FSIC, 1" bolt throw CL888R Drawer cabinet lock, FSIC, 3/4" bolt throw CL920R FSIC Cam Lock Open Restricted $187.00 $205.00 143.00 161.00 Cylinders CL777R CL-Series: Full-Size Interchangeable Core Primus XP/ Primus Controlled Access Finishes Function Description 605 626 Keyed Door cabinet lock, FSIC, 1" bolt throw CL774R-XP Door cabinet lock, FSIC, 1" bolt throw CL874R Drawer cabinet lock, FSIC, 3/4" bolt throw CL874R-XP Drawer cabinet lock, FSIC, 3/4" bolt throw CL974R FSIC Cam Lock CL974R-XP FSIC Cam Lock $218.00 Keys CL774R 190.00 CL-Series: Full Size Interchangeable Core Ratchet Lock Description CL-5 Finishes Function 605 626 Keyed CL929R Ratchet Lock, FSIC Open Restricted $185.00 $203.00 Full Size Interchangeable Core Option Description Specify Price Full Size Construction Core * T suffix Example: N/C Less Full Size Core J suffix Example: Deduct $36.00 from lock price * Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying . Notes: Keying options: see Keys & Keying. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms & Conditions for more information. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $17.40 per cylinder. Price Book 8 Effective April 4, 2020 • Rev. 04/20 411 CYLINDERS / KEYS / AUXILIARY CL • Complete Locks CL721G Small Format Interchangeable Core Offering CL725G CL771G CL775G CL-Series: Everest Restricted Small Format Interchangeable Core Finishes Function Description 626 Keyed Cylinders Open CL721G Door cabinet lock, SFIC, 1" bolt throw CL771G Drawer cabinet lock, SFIC, 3/4" bolt throw CL725G Everest Patented SFIC Rim Latch Lock CL775G Everest Patented SFIC Rim Deadbolt Lock CL729G CL728G Keys CL720G $149.00 CL-Series: Everest Restricted Small Format Interchangeable Core Finishes CL-6 Function Description 626 Keyed Open $141.00 CL720G Everest Patented SFIC Cam Lock CL728G Everest Patented SFIC Mail Box Lock 116.00 CL729G Everest Patented SFIC Ratchet Lock 179.00 Notes: For small format construction core, specify suffix HD. Example: B560HD. Available at no additional charge. Locks are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details. Please refer to Everest small format interchangeable core key control policies, under the Terms & Condition Section. Price Book 8 412 Effective April 4, 2020 • Rev. 04/20 Strikes, Non-Standard Door Thickness, Special Locks CYLINDERS / KEYS / AUXILIARY CL10-355 Options • CL CL10-354 Strikes Description Specify CL10-355 Bar strike, 3/4" x 1 31/32" x 1/4", standard CL10-354 N/C Cylinders Bar strike, 3/4" x 1 31/32" x 1/2", standard Add to Lock Price Non-Standard Door Thickness Description Specify Lock for 1 3/8" door 1 3/8" door thickness - for CL door and drawer locks Add to Lock Price $3.30 Keys Special Locks 6 Extended Factory Lead Time Function Description Price Each $612.00 Cabinet Lock for doors 1/8" to 3/4" thick XB03-232P Primus Cabinet Lock for doors 1/8" to 3/4" thick 612.00 XB06-530 Cabinet Lock for doors over 7/8" to 2" thick 737.00 XB06-530P Primus Cabinet Lock for doors over 7/8" to 2" thick 737.00 Notes:: For slotted strike (CL10-352), see CL Parts: Strikes, Page CL-6. Locking provided by swinging cam. Attached to door with hex nut. Keying options: see Keys & Keying. If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request Process on page iv. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $18.00. This does not apply to Primus families. See Terms & Conditions for more information. Specify door hand and door thickness. Shaded items are standard components and are furnished with locks unless otherwise specified. Price Book 8 Effective April 4, 2020 • Rev. 04/20 413 CL-7 XB03-232 Trim Collars, Strikes, Adapters, Screws Drivers and Accessories, Trim Collars CYLINDERS / KEYS / AUXILIARY CL • Parts 36-031 Trim Collars Part Number 36-031 Finish • Description 1 3/16" diameter x 5/8" depth CL10-354 CL10-352 Price Each $11.40 CL10-355 Cylinders Strikes Part Number CL10-352 CL10-354 CL10-355 Description Slotted strike Bar strike, 3/4" x 1 31/32" x 1/4", standard Bar strike, 3/4" x 1 31/32" x 1/2", standard Price Each $3.10 Adapters Part Number CL10-350 Description Spacer Price Each $3.10 Description Retaining screw Price Each $0.48 Keys Screws Part Number CL10-301 CL-8 Drivers and Accessories for CL100/200/ 725/721/ 777/888 Series Part Number CL10-360 CL10-361 CL10-362 CL7788-PA-D CL725-1 CL-ETS1 CLTR78 Description Universal Driver bar for CL100/ 200 Driver bar for CL100/ 200PB Driver bar for CL100/ 200PB 1 3/8" long Actuator for FSIC CL locks Spacer for 6 pins SFIC External trim plate spacer Trim rings 626 or 605 Price Each $2.80 2.80 2.80 2.40 2.20 3.00 3.20 CL-720G Cam Part Number CL720-3-1 CL720-3-2 CL720-3-3 CL720-3-4 CL720-3-5 CL775-SP CL725-SP Description CL720 short cam inverted hand CL720 long inbent cam, vertical hand CL720 long offset cam, inverted hand CL720 long straight cam, vertical hand CL720 long shall offset cam, inverted hand2.40 Strike pack for CL775 (Latch lock) Strike pack for CL725 (Deadbolt lock) Price Each $3.10 3.10 3.00 3.30 2.20 3.10 3.00 CL729-Ratchet Locks Accessories Part Number CL729S-2 CL729S-3 Description Optional strap for 3/8" material thickness Optional strap for 5/8" material thickness Price Each $9.70 13.80 CL720/920 Trim Collars Part Number TR201 TR202 TR203 TR200A Description Trim collar for CL720/ 920, 1/8" (626,605)$3.30 Trim collar for CL720/ 920, 1/4" (626,605) Trim collar for CL720/ 920, 3/8" (626,605) Trim collar package for CL720/ 920, includes all three Price Book 8 414 Effective April 4, 2020 • Rev. 04/20 Price Each $3.10 5.20 5.60 15.40 Introduction TOOLS & KITS Table of Contents TOOLS AND KITS Keying Tools & Kits Tools-2 Full Size Pin Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-2 Full Size Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-3 Small Format Interchangeable Core Pin Kits . . . . . . . . . . Tools-4 Small Format Interchangeable Core Service Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-4 Competitive Keying Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-5 Competitive Keying Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-5 Tools Tools-6 Installation Templates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-6 Installation Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-7 Torx® Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-7 Kits Tools-8 Portable Security Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-8 Home Secure RCK Accessories . . . . . . . . . . . . . . . . . . . . . . . . Tools-8 Maintenance Kits (Replacement Parts Assortments). . Tools-8 Installation JIG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-9 Mortise JIG (wood). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tools-10 Forms & Examples How To Order Tools-1 Merchandising Aids Price Book 8 Effective April 4, 2020 • Rev. 04/20 415 TOOLS & KITS • Keying Tools & Kits Full Size Pin Kits 40-133 40-134 TOOLS AND KITS 40-119 Merchandising Aids Tools-2 Full Size Pin Kits Part Number 40-070 Description Primus pin kit Sidebars 40-119 Pin kit, seal-tight metal box 40-132 Retail Keying Kit, seal-tight metal box 40-133 Home Secure™ Pin kit 40-134 Pin kit, snap-tight plastic box Finger pins Finger pin springs Bottom pins Master pins Top pins Pin springs Retainer caps Bottom pins Top pins Pin springs Cylinder caps Cap spring and pins Bottom pins Top pins Master pins Follower bar Removal tool Key gage Cylinder springs Bottom pins Top pins Pin springs Retainer cap pins Contents Sidebar springs Plug holder Retainer cap pins Retainer cap pin springs Shim stock Tweezers Follower bar B-Series cylinder bars Key gage Follower bar Cap-removal tool Retaining Rings Tweezers Retaining rings Retainer caps Retainer cap pin springs B-Series cylinder bars B-Series drivers Shim stock Key gage Follower bar T-Pins Spring T-Pin Note: 1) For replacement pins and springs, see Cylinders. Price Book 8 416 Effective April 4, 2020 • Rev. 04/20 Price Each $523.00 Cylinder Cap Removal Tool 446.00 T-Pin Spring T-Pin Removable Cap 243.00 Construction balls Retainer cap pins T-Pin Spring T-Pin Removable Cap 419.00 Removable Cap 121.00 Keying Tools & Kits • TOOLS & KITS Full Size Keying Tools 40-104 40-074 40-075 TOOLS AND KITS BL UE K O -L O IT ORIES Q UAL ACCESS7 & LS CA 9266 , K TOO -LO NGE PRO ORA R O SI P P201 #B NCH NAL PU PR OFES YT 9 OOLS 8 5 9 8 7 5 2 6 3 1 4 1 0 K O 0 2 -L O PR ® 40-099 M540-056 M540-051 M540-000 Aluminum follower and Master Pin Remover Tools-3 M204-200 Merchandising Aids Full Size Keying Tools Part Number 40-066 40-074* 40-075** 40-104 40-099 M204-168 M204-200 M204-201 M540-051 M540-056 M540-000 M504-548 * ** Description Primus® plug holder Everest vise jaw upgrade kit Key bitting punch for Everest C Family, Everest 29 S and Obverse keyway families Key gage (All Schlage keys except SFIC) Key bitting punch for Everest D and Everest 29 T Families Lubriplate Tweezers Shim (pack of 25) Follower Cylinder cap removal tool Aluminum Follower and Master Pin Remover Follower for Modular Cylinder Price Each $136.00 96.50 3,252.00 15.20 3,898.00 9.60 41.80 32.70 3.40 59.20 61.20 20.20 Adds Everest C and Everest 29 S Family capability to Blue Punch key machines (designed for Obverse keys) with serial numbers below 990358, manufactured before July 1999. For all Standard and Primus keys with Obverse, Everest C and Everest 29 S Family sections only. Price Book 8 Effective April 4, 2020 • Rev. 04/20 417 Small Format Interchangeable Core Pin Kit and Service Equipment TOOLS & KITS • Keying Tools & Kits Small Format Interchangeable Core Pin Kits Description A2 System pin kit Blocking pin springs Blocking pins Bottom pins Caps Master/build-up/top pins Tumbler spring Contents Plug retainers Capping block Capping tool Ejector tool Key gage Tweezers Price Each $870.00 Note: 1) For pin kit refills, see Cylinders. 40-071 40-181 40-128 Everest B and Everest 29 R Family Key Bitting Punch Falcon/Best® SFIC Key Bitting Punch SFIC Key Gage O SI P201 #B NCH NAL 9 OOLS K O -L O IT ORI Q UAL ACCESS7 & LS CA 9266 , K TOO -LO NGE PRO ORA R P PR OFES YT E PU BLU Tools-4 TOOLS AND KITS Part Number 40-129 ES 8 5 9 8 7 6 5 4 3 2 1 0 9 8 7 5 2 6 3 1 K 0 O 0 2 -L 1 4 O PR 40-171 Merchandising Aids IC Decode, Dump Tool 40-172 40-173 Ejector Pin Staking Tool Small Format Interchangeable Core Service Equipment Part Number 40-071* 40-128 40-181 40-171 40-172 40-173 Description Key bitting punch, Everest B and Everest 29 R Family keys only Key gage, A2 system Key bitting punch, Falcon/Best® IC decode, rekey, dump tool Ejector Tool Staking Tool Price Each $4,091.00 18.50 3,853.00 276.00 52.00 52.00 SL Cylinder 7 pin A2 Pinning Kit Part Number 40-247 Description SL A2 Pin Kit Contents L Pins, Single Cut (25 each) SL End Cap Pin L Pins, Master pins (25 each) SL End Cap Pin Spring L Pin Springs Everest SFIC Check Pin Locking Side Bar Everest SFIC Check Pin Spring Locking Side Bar Springs A2 Key System Key Gauge SL Plug Clip Plug Holder Crimp Tool SL Plug Cover Tweezers SL End Cap Price Each $1,383.00 SL Cylinder Plug Holder and CrimpTool Part Number 40-296 Description Price Each $145.00 SL Plug Holder Crimp Tool Price Book 8 418 Effective April 4, 2020 • Rev. 04/20 * For service of this key machine, contact: Pro-Lok 655 North Hariton St. Orange, CA 92668 (714) 633-0681 FAX (714) 633-0471 Tools • TOOLS & KITS Installation 40-286 40-226 40-227 Universal Clamp AL & ND Template L-Series Template (front side) 40-228 40-153 H-Series Template 5" Backset Adapter Tools-5 40-158 Mortise Pocket Filler (edge) TOOLS AND KITS 40-152 1 3/8" Thick Door Adapter x 2 3/8" Backset 40-026 1 1/2" Bushing (old style) Merchandising Aids Strike Marking Chisels 40-029 40-030 Latch Marking Chisels 40-031 40-032 1" Front 1 1/8" Front Price Book 8 Effective April 4, 2020 • Rev. 04/20 419 TOOLS & KITS • Tools Installation Tools Merchandising Aids Tools-6 TOOLS AND KITS Installation Tools Part Number Description Price Each 40-017 AL and D-Series Lever castle nut wrench 40-026 Bushing, 1 1/2", for 40-012 jig 40-029 Strike marking chisel - full lip strikes 88.00 40-030 Strike marking chisel - 1 1/8" x 2 3/4" 97.30 14.50 55.10 40-031 Latch marking chisel - 1" x 2 1/4" 84.00 40-032 Latch marking chisel - 1 1/8" x 2 1/4" 84.00 40-049 Tool box, for 40-006 kit 310.00 40-112 Circular strike bit for machine equipment 958.00 40-152 Backset Adapter for 1-3/8" doors and/or 2-3/8" Backset 247.00 40-153 Backset Adapter for 5" Backset 169.00 40-158 L-Series mortise pocket filler (edge) 179.00 40-035 Strike locator - 7/8" 40-015 7/8" Boring bit 40-179 Strike locator - 1" 40-175 1" Boring bit 109.00 40-176 2-1/8" Multi-spur bit 276.00 239.00 021415 M504-413 56.70 212.00 57.00 40-177 1-1/2" Muliti-spur bit 24002693 ND & L Lever removal tool 24341471 ND & L Lever removal tool - 20 pack M204-198 Boring jig - ND and AL series locks M504-271 Tool to remove AL and D-Series levers M504-306 Circular faceplate wrench 2.80 021415 Spanner wrench, D-Series Knobs and L-Series 4.40 M504-347 Socket screw key, for 40-012 jig M504-413 Installation tool, interchangeable core 18.40 N523-108 Tool to remove AL and D-Series levers 1.90 40-226 Door prep installation template - AL, ND, NDE series 352.00 40-227 Door prep installation template - L series 464.00 40-228 Door prep installation template - H series 426.00 47278471 Door prep installation template for L Lock HSLR Trim 464.00 40-286 Universal Clamp 476.00 24.10 441.00 17.30 M504-271 1.70 3.70 N523-108 Torx® Tools Part Number M504-424 M504-425 M504-426 M504-427 M504-428 Description Tool T-8 Tool T-15 Tool T-20 Tool T-30 Tool T-10 Price Each $44.60 M204-198 43.00 Price Book 8 420 Effective April 4, 2020 • Rev. 04/20 Kits • TOOLS & KITS RCK Accessories, Maintenance Kits Home Secure RCK Accessories 34-401 Description Home Secure Construction Key Envelopes Home Secure Owner Key Envelopes Home Secure Replacement Construction Balls (pack of 1,000 construction balls) Price Each 0.44 0.44 TOOLS AND KITS Part Number P513-024 P513-023 32.00 Maintenance Kits (Replacement Parts Assortments) Part Number 40-054 40-097 40-223 Price Each $993.00 688.00 1,067.00 Description L-Series maintenance kit ND-Series lever maintenance kit Modular Cylinder Service Kit Tools-7 KZ390AL Portable Security Repair Kit Merchandising Aids Portable Security Repair Kits Part Number KZ390AL Price Each Description Portable Security Repair Kit supports all Portable Security Commercial Padlocks and Locking Cables, SFIC and KNK. See PS-9 for additional details. $482.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 421 TOOLS & KITS • Kits 40-147 TOOLS AND KITS Complete Installation Kit Installation Kits M504-497 40-148 40-176 Installation JIG Case Only 2 1/8" Multi Spur Bit 40-177 40-175 1" Bit 40-015 7/8" Bit 1" Strike Locator 1 1/2" Multi Spur Kit 40-179 40-035 7/8" Strike Locator 40-029 40-030 1 1/8" x 2 3/4" Strike Chisel Tools-8 Full Lip Strike Chisel 40-032 40-031 Merchandising Aids 1" x 2 1/4" Latch Chisel 1 1/8" x 2 1/4" Latch Chisel Installation Kits Part Number 40-147 M504-497 40-148 Notes: Description Contents Installation Kit for Locksets & Deadbolts Kit includes JIG, Case, (2) Multi-spur bits, (4) latch/strike chisels, (2) Bushing Plates, 1" Auger bit & strike locator Case Only Installation JIG only 40-175 40-179 40-029 40-031 40-032 — — 1) For F-Series installation, 40-015 and 40-035 (Page Tool-7) is required. 2) For 40-147, doors requiring thrubolt holes and/or 7/8" edge bores, bits sold separately. Reference Tool-7. Price Book 8 422 40-148 M504-497 40-176 40-177 40-030 Effective April 4, 2020 • Rev. 04/20 Price Each $2,603.00 231.00 1,971.00 Kits • TOOLS & KITS Installation Kits 40-160 40-162 40-161 Mortise Lock JIG 40-163 11/16" Wood Cutter Bit 5/8" Wood Cutter Bit 3/4" Wood Cutter Bit 40-166 7/8" Wood Cutter Bit 15/16" Wood Cutter Bit 40-168 40-167 40-169 1 1/16" Wood Cutter Bit 1" Wood Cutter Bit TOOLS AND KITS 40-165 40-164 13/16" Wood Cutter Bit 1 1/4" Wood Cutter Bit Tools-9 40-170 Long Boring Shaft Merchandising Aids Installation Kits Part Number 40-160 Description Contents 40-160 40-165 40-167 Installation kit for mortise lock Kit includes: Jig, Case (3 wood cutter bits and long boring shaft) 40-169 40-170 Price Each $1,369.00 Installation Tools Part Number 40-161 40-162 40-163 40-164 40-165 40-166 40-167 40-168 40-169 40-170 Description 5/8" Woodcutter Bit 11/16" Woodcutter Bit 3/4" Woodcutter Bit 13/16" Woodcutter Bit 7/8" Woodcutter Bit 15/16" Woodcutter Bit 1" Woodcutter Bit 1-1/16" Woodcutter Bit 1-1/4" Woodcutter Bit Long boring shaft for locks up to 6" Price Each $129.00 129.00 129.00 129.00 140.00 140.00 140.00 140.00 171.00 268.00 Price Book 8 Effective April 4, 2020 • Rev. 04/20 423 TOOLS & KITS • Kits Merchandising Aids Tools-10 TOOLS AND KITS Notes Price Book 8 424 Effective April 4, 2020 • Rev. 04/20 MERCHANDISING AIDS Introduction Table of Contents TOOLS AND KITS Display Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3 Solid Oak Mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3 Special Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-3 Miscellaneous Merch-4 Finish Selector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4 Plastic Lock Case Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4 Promotional Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Merch-4 Forms & Examples How To Order Product literature is available, contact Customer Service. Tools and Kits Merch-1 Price Book 8 Effective April 4, 2020 • Rev. 04/20 425 MERCHANDISING AIDS • Display Mounts Solid Oak Mounts Solid Oak Mounts TOOLS AND KITS 44-110 44-111 44-112 ® ® ® 44-161 ® * Top and bottom holes are 4" center to center. Merch-2 Tools and Kits XL11-806 Price Book 8 426 Effective April 4, 2020 • Rev. 04/20 Display Mounts • MERCHANDISING AIDS Display Mounts, Special Parts Display Mounts Dimensions Description A Price Each B C Overall 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" — 2 1/8" — 2 1/2" x 1" 43.20 TOOLS AND KITS Part Number 186.00 44-112 D Lever, AL (single), ND Lever 44-115 Clear plastic mount ring 44-161 FE & BE Keypad Lock Mount 2 3/8" 2 1/8" 1" 6 " x 14" 96.50 44-165 CS200, FE400, H200 5 1/2" mount 2 3/8" 2 1/8" 1" 6" x 19" 133.00 44-166 CS200, FE400, H200 4" mount 2 3/8" 2 1/8" 1" 6" x 19" 133.00 * For special L lock mount, see Special Parts. Notes: 1) Price does not include lock. 2) L400-Series mounts are not available. Tools and Kits Merch-3 Price Book 8 Effective April 4, 2020 • Rev. 04/20 427 MERCHANDISING AIDS • Miscellaneous Finish Selector Kit, Plastic Lock Case Cover, Promotional Items, TOOLS AND KITS 39-029 Finish Selector Kit Part Number 39-029 Description Finish selector kit Finishes: 505, 605, 606, 609, 612, 613, 619, 620, 622, 625, 626, 629, 630, 716, 643e Price Each $38.40 Plastic Lock Case Cover Tools and Kits Part Number 39-042 Description Price Each $78.30 Plastic lock case cover (for display), L-Series Modular Cylinder Sales Kit Part Number Description Contents: FSIC Classic, SFIC Everest 29 R, Primus XP Classic, Everest 29 S, Everest 29 S Primus XP, Mortise Modular Cylinder, Rim Modular Cylinder Merch-4 40-224 Price Book 8 428 Effective April 4, 2020 • Rev. 04/20 Price Each $686.00 INDEX Page Number Part Number Page Number 01-001 . . . . . . . . . . . . . . . . . . 01-002 . . . . . . . . . . . . . . . . . 01-008 . . . . . . . . . . . . . . . . . 01-009 . . . . . . . . . . . . . . . . . 01-018 . . . . . . . . . . . . . . . . . . 01-026 . . . . . . . . . . . . . . . . . 01-053 . . . . . . . . . . . . . . . . . 01-055 . . . . . . . . . . . . . . . . . 01-056 . . . . . . . . . . . . . . . . . 01-057 . . . . . . . . . . . . . . . . . 01-058 . . . . . . . . . . . . . . . . . 01-060 . . . . . . . . . . . . . . . . . 01-063 . . . . . . . . . . . . . . . . . 02-037 . . . . . . . . . . . . . . . . . 03-000 . . . . . . . . . . . . . . . . 03-030 . . . . . . . . . . . . . . . . . 03-031 . . . . . . . . . . . . . . . . . 03-032 . . . . . . . . . . . . . . . . . 03-042 . . . . . . . . . . . . . . . . . 03-200 . . . . . . . . . . . . . . . . . 03-230 . . . . . . . . . . . . . . . . . 03-231 . . . . . . . . . . . . . . . . . . 03-232 . . . . . . . . . . . . . . . . . 03-233 . . . . . . . . . . . . . . . . . 03-234 . . . . . . . . . . . . . . . . . 03-235 . . . . . . . . . . . . . . . . . 03-236 . . . . . . . . . . . . . . . . . 03-237 . . . . . . . . . . . . . . . . . 03-244 . . . . . . . . . . . . . . . . . 03-255 . . . . . . . . . . . . . . . . . 03-266 . . . . . . . . . . . . . . . . . 03-277 . . . . . . . . . . . . . . . . . 04-001 . . . . . . . . . . . . . . . . . 04-002 . . . . . . . . . . . . . . . . 04-006 . . . . . . . . . . . . . . . . 04-007 . . . . . . . . . . . . . . . . . 04-020 . . . . . . . . . . . . . . . . 04-021 . . . . . . . . . . . . . . . . . 04-022 . . . . . . . . . . . . . . . . . 04-023 . . . . . . . . . . . . . . . . . 04-025 . . . . . . . . . . . . . . . . . 04-026 . . . . . . . . . . . . . . . . . 04-030 . . . . . . . . . . . . . . . . 04-031 . . . . . . . . . . . . . . . . . 04-033 . . . . . . . . . . . . . . . . . 04-034 . . . . . . . . . . . . . . . . . 04-060 . . . . . . . . . . . . . . . . 06-242 . . . . . . . . . . . . . . . . . 08-000 . . . . . . . . . . . . . . . . 08-020 . . . . . . . . . . . . . . . . 08-020 xxx . . . . . . . . . . . . . 08-021 . . . . . . . . . . . . . . . . . 08-027 . . . . . . . . . . . . . . . . . 08-027 xxx . . . . . . . . . . . . . 08-029 . . . . . . . . . . . . . . . . . 08-030 . . . . . . . . . . . . . . . . 08-030 xxx . . . . . . . . . . . . . 08-032 . . . . . . . . . . . . . . . . . 08-034 . . . . . . . . . . . . . . . . . 08-035 . . . . . . . . . . . . . . . . . 09-019 . . . . . . . . . . . . . . . . . 09-060 . . . . . . . . . . . . . . . . 09-061 . . . . . . . . . . . . . . . . . 09-062 . . . . . . . . . . . . . . . . . 09-063 . . . . . . . . . . . . . . . . . 09-138 . . . . . . . . . . . . . . . . . 09-139 . . . . . . . . . . . . . . . . . 65 65 65 65 65 65 65 67 67 67 67 67 67 322 124 124 124 124 125 124 124 124 124 124 124 124 124 124 124 124 124 124 106 106 106 106 107 107 107 107 1 07 107 106 106 106 106 79 246 256 254 274 274 254 274 2 46 254 2 74 2 54 254 254 308 126 126 126 126 208 208 09-155 . . . . . . . . . . . . . . . . . 09-156 . . . . . . . . . . . . . . . . . 09-157 . . . . . . . . . . . . . . . . . . 09-158 . . . . . . . . . . . . . . . . . 09-159 . . . . . . . . . . . . . . . . . 09-189 . . . . . . . . . . . . . . . . . 09-195 . . . . . . . . . . . . . . . . . 09-196 . . . . . . . . . . . . . . . . . 09-197 . . . . . . . . . . . . . . . . . 09-198 . . . . . . . . . . . . . . . . . 09-199 . . . . . . . . . . . . . . . . . 09-200 . . . . . . . . . . . . . . . . . 09-401 . . . . . . . . . . . . . . . . . 09-402 . . . . . . . . . . . . . . . . . 09-403 . . . . . . . . . . . . . . . . . 09-403 xx . . . . . . . . . . . . . . 09-404 . . . . . . . . . . . . . . . . 09-409 . . . . . . . . . . . . . . . . 09-410 . . . . . . . . . . . . . . . . . 09-411 . . . . . . . . . . . . . . . . . . 09-412 . . . . . . . . . . . . . . . . . 09-416 . . . . . . . . . . . . . . . . . 09-417 . . . . . . . . . . . . . . . . . 09-418 . . . . . . . . . . . . . . . . . 09-446 . . . . . . . . . . . . . . . . . 09-447 . . . . . . . . . . . . . . . . . 09-449 . . . . . . . . . . . . . . . . . 09-451 . . . . . . . . . . . . . . . . . 09-454 . . . . . . . . . . . . . . . . . 09-455 . . . . . . . . . . . . . . . . . 09-456 . . . . . . . . . . . . . . . . . 09-459 . . . . . . . . . . . . . . . . . 09-473 . . . . . . . . . . . . . . . . . 09-474 . . . . . . . . . . . . . . . . . 09-475 . . . . . . . . . . . . . . . . . 09-477 . . . . . . . . . . . . . . . . . 09-483 134 . . . . . . . . . . . . . 09-483 138 . . . . . . . . . . . . . 09-483 200 . . . . . . . . . . . . 09-483 212 . . . . . . . . . . . . . 09-483 214 . . . . . . . . . . . . . 09-484 114 . . . . . . . . . . . . . 09-484 118 . . . . . . . . . . . . . 09-484 138 . . . . . . . . . . . . . 09-485 114 . . . . . . . . . . . . . 09-485 118 . . . . . . . . . . . . . 09-485 138 . . . . . . . . . . . . . 09-486 . . . . . . . . . . . . . . . . 09-487 xx . . . . . . . . . . . . . . 09-488 134 . . . . . . . . . . . . . 09-488 138 . . . . . . . . . . . . . 09-488 200 . . . . . . . . . . . . 09-488 212 . . . . . . . . . . . . . 09-488 214 . . . . . . . . . . . . . 09-493 . . . . . . . . . . . . . . . . . 09-494 . . . . . . . . . . . . . . . . . 09-494 112 . . . . . . . . . . . . . 09-494 1316 . . . . . . . . . . . . 09-502 . . . . . . . . . . . . . . . . . 09-506 . . . . . . . . . . . . . . . . 09-508 . . . . . . . . . . . . . . . . 09-509 027 . . . . . . . . . . . . 09-509 033 . . . . . . . . . . . . 09-509 040 . . . . . . . . . . . . 09-509 047 . . . . . . . . . . . . 09-544 027 . . . . . . . . . . . . 09-544 033 . . . . . . . . . . . . 208 208 208 208 208 208 308 308 308 308 308 308 199, 229 199, 229 199, 229 265 199, 229 305 305 305 305 308 308 308 196 196 196 196 196 196 196 265 197 197 197 197 198 198 198 198 198 197 197 197 197 197 197 265 202, 231 198 198 1 98 198 198 198 197 197 197 265 200, 230 199, 229 202, 231 202, 231 202, 231 202, 231 202, 231 202, 231 Part Number 09-544 040 . . . . . . . . . . . . 09-544 047 . . . . . . . . . . . . 09-548 . . . . . . . . . . . . . . . . . 09-550 . . . . . . . . . . . . . . . . . 09-551 . . . . . . . . . . . . . . . . . 09-552 . . . . . . . . . . . . . . . . . 09-553 . . . . . . . . . . . . . . . . . 09-611 . . . . . . . . . . . . . . . . . . 09-632 . . . . . . . . . . . . . . . . . 09-633 . . . . . . . . . . . . . . . . . 09-634 . . . . . . . . . . . . . . . . . 09-635 . . . . . . . . . . . . . . . . . 09-636 . . . . . . . . . . . . . . . . . 09-637 . . . . . . . . . . . . . . . . . 09-638 . . . . . . . . . . . . . . . . . 09-639 . . . . . . . . . . . . . . . . . 09-642 . . . . . . . . . . . . . . . . . 09-655 . . . . . . . . . . . . . . . . . 09-661 . . . . . . . . . . . . . . . . . 09-662 . . . . . . . . . . . . . . . . . 09-663 . . . . . . . . . . . . . . . . . 09-664 . . . . . . . . . . . . . . . . 09-665 . . . . . . . . . . . . . . . . . 09-666 . . . . . . . . . . . . . . . . 09-667 . . . . . . . . . . . . . . . . . 09-668 . . . . . . . . . . . . . . . . 09-669 . . . . . . . . . . . . . . . . . 09-670 . . . . . . . . . . . . . . . . . 09-671 . . . . . . . . . . . . . . . . . 09-672 . . . . . . . . . . . . . . . . . 09-713 . . . . . . . . . . . . . . . . . . 09-717 . . . . . . . . . . . . . . . . . . 09-718 . . . . . . . . . . . . . . . . . 09-751 . . . . . . . . . . . . . . . . . . 09-752 . . . . . . . . . . . . . . . . . 09-753 . . . . . . . . . . . . . . . . . 09-754 . . . . . . . . . . . . . . . . . 09-756 . . . . . . . . . . . . . . . . . 09-757 . . . . . . . . . . . . . . . . . 09-764 . . . . . . . . . . . . . . . . . 09-765 . . . . . . . . . . . . . . . . . 09-766 . . . . . . . . . . . . . . . . . 09-767 . . . . . . . . . . . . . . . . . 09-774 . . . . . . . . . . . . . . . . . 09-833 . . . . . . . . . . . . . . . . . 09-834 . . . . . . . . . . . . . . . . . 09-835 . . . . . . . . . . . . . . . . . 09-836 . . . . . . . . . . . . . . . . . 09-900 xx . . . . . . . . . . . . . . 09-904 xx . . . . . . . . . . . . . . 09-905 . . . . . . . . . . . . . . . . 09-992 . . . . . . . . . . . . . . . . . 09-993 . . . . . . . . . . . . . . . . . 09-994 . . . . . . . . . . . . . . . . 09-995 . . . . . . . . . . . . . . . . . 09-996 . . . . . . . . . . . . . . . . 09-997 . . . . . . . . . . . . . . . . . 09-998 . . . . . . . . . . . . . . . . 10-001 . . . . . . . . . . . . . . . . . . 10-001 100 . . . . . . . . . . . . . 10-001 112 . . . . . . . . . . . . . . 10-001 114 . . . . . . . . . . . . . . 10-001 118 . . . . . . . . . . . . . . 10-001 134 . . . . . . . . . . . . . . 10-001 200 . . . . . . . . . . . . . 10-001 xx . . . . . . . . . . . . . . . Page Number 202, 231 202, 231 199, 229 200, 230 200, 230 200, 230 200, 230 204 199, 229 1 99, 229 199, 229 199, 229 199, 229 199, 229 199, 229 199, 229 199, 229 200, 230 201 201 201 201 201 201 201 201 201 201 201 201 201 201 201 305 305 305 305 308 308 305 305 305 305 126, 344 305 305 3 05 305 202, 231 202, 231 202, 231 358 358 358 358 358 358 358 137, 244, 245, 255, 265, 274 66, 80 66, 80 66, 80 66, 80 66, 80 66, 80 137, 265, 274 Price Book 8 Effective April 4, 2020 • Rev. 04/20 429 PARTS INDEX Part Number PARTS INDEX INDEX Part Number Page Number Part Number Page Number 10-004 . . . . . . . . . . . . . . . . . 10-013-112 . . . . . . . . . . . . . . 10-013-118 . . . . . . . . . . . . . . 10-016 . . . . . . . . . . . . . . . . . . 10-025 112 . . . . . . . . . . . . . . 10-025-112 . . . . . . . . . . . . . . 10-025 138 . . . . . . . . . . . . . 10-025-138 . . . . . . . . . . . . . 10-025 1316 . . . . . . . . . . . . . 10-025-1316 . . . . . . . . . . . . 10-025 xx . . . . . . . . . . . . . . . 10-026 . . . . . . . . . . . . . . . . . 6 6, 80, 137, 265, 274 1 07, 126 107, 126 1 07, 126 6 6, 80 1 07, 126 66, 80, 274 107, 126 6 6, 80, 137, 265, 274 1 07, 126 1 37, 265 66, 80, 244, 245, 255, 265, 274 6 6, 80, 244, 245, 255, 265, 274 66, 80, 255 148, 160, 255 201 2 01 2 01 201 201 201 148, 160 2 01 148, 160, 244, 245, 255 148, 160, 244, 245, 255 148, 160, 244, 245, 255 148, 160 1 48, 160 1 48 2 44, 245 1 48, 160, 255 2 44, 245 2 44, 245 2 44, 245 2 44, 245 2 44, 245 1 26 1 26 1 26 1 26 2 01 2 01 6 5, 80 6 5, 80 6 5, 80 65, 80 6 5, 80 6 5, 80 6 5, 80 6 5, 80 6 5, 80 6 5, 80 6 5, 80 6 5, 80 6 5, 80 6 5 6 5, 80 6 5, 80 137 1 37 148 1 48, 254 1 48, 254 148 1 48, 245, 254 12-297 . . . . . . . . . . . . . . . . . . 12-317 . . . . . . . . . . . . . . . . . . . 12-339 . . . . . . . . . . . . . . . . . . 12-340 . . . . . . . . . . . . . . . . . . 12-617 . . . . . . . . . . . . . . . . . . 12-618 . . . . . . . . . . . . . . . . . . 12-625 . . . . . . . . . . . . . . . . . . 12-626 . . . . . . . . . . . . . . . . . . 12-627 . . . . . . . . . . . . . . . . . . 12-628 . . . . . . . . . . . . . . . . . . 12-630 . . . . . . . . . . . . . . . . . . 12-631 . . . . . . . . . . . . . . . . . . 12-632 . . . . . . . . . . . . . . . . . . 12-633 . . . . . . . . . . . . . . . . . . 12-640 . . . . . . . . . . . . . . . . . 12-641 . . . . . . . . . . . . . . . . . . 12-642 . . . . . . . . . . . . . . . . . . 12-643 . . . . . . . . . . . . . . . . . . 12-650 . . . . . . . . . . . . . . . . . 12-651 . . . . . . . . . . . . . . . . . . 12-652 . . . . . . . . . . . . . . . . . . 12-653 . . . . . . . . . . . . . . . . . . 13-247 . . . . . . . . . . . . . . . . . . 13-248 . . . . . . . . . . . . . . . . . . 14-010 . . . . . . . . . . . . . . . . . . 14-028 . . . . . . . . . . . . . . . . . 14-042 . . . . . . . . . . . . . . . . . 14-047 . . . . . . . . . . . . . . . . . . 14-048 . . . . . . . . . . . . . . . . . 16-132 . . . . . . . . . . . . . . . . . . 16-203 . . . . . . . . . . . . . . . . . . 16-204 . . . . . . . . . . . . . . . . . 16-228 . . . . . . . . . . . . . . . . . . 16-260 . . . . . . . . . . . . . . . . . 16-480 . . . . . . . . . . . . . . . . . 16-481 . . . . . . . . . . . . . . . . . . 16-482 . . . . . . . . . . . . . . . . . 16-483 . . . . . . . . . . . . . . . . . 16-484 . . . . . . . . . . . . . . . . . 20-001 . . . . . . . . . . . . . . . . . 20-001-118 . . . . . . . . . . . . . 20-002 . . . . . . . . . . . . . . . . . 20-009 . . . . . . . . . . . . . . . . 20-013 . . . . . . . . . . . . . . . . . 20-021 . . . . . . . . . . . . . . . . . 20-022 . . . . . . . . . . . . . . . . . 20-030 . . . . . . . . . . . . . . . . . 20-033 . . . . . . . . . . . . . . . . . 20-057 . . . . . . . . . . . . . . . . . 20-059 . . . . . . . . . . . . . . . . . 20-060 . . . . . . . . . . . . . . . . 20-061 . . . . . . . . . . . . . . . . . 20-062 . . . . . . . . . . . . . . . . . 20-066 . . . . . . . . . . . . . . . . . 20-067 . . . . . . . . . . . . . . . . . 20-069 . . . . . . . . . . . . . . . . . 20-071 . . . . . . . . . . . . . . . . . 20-071-XP . . . . . . . . . . . . . . 20-072 . . . . . . . . . . . . . . . . . 20-072-XP . . . . . . . . . . . . . 20-079 . . . . . . . . . . . . . . . . . 20-090 . . . . . . . . . . . . . . . . 20-091 . . . . . . . . . . . . . . . . . 20-172 . . . . . . . . . . . . . . . . . . 20-174 . . . . . . . . . . . . . . . . . . 20-188 . . . . . . . . . . . . . . . . . 20-188-XP . . . . . . . . . . . . . . 1 60 1 60 2 45 2 45 1 61 1 61 1 61 1 48, 161 1 60 1 60 1 60 1 60 1 60 1 48, 160, 245, 254 1 60 1 60 1 60 1 60 1 60 1 60 1 60 1 60 1 06, 126 1 06, 126 1 06, 126 1 06, 126 1 06, 126 106, 126 1 06, 126 2 45, 255, 274 2 74 2 55, 274 2 45, 255 2 45 2 55 2 55 2 55 2 45, 255 2 45, 255 2 11, 328, 337 3 50 3 28 3 47 3 29 3 41 3 41 3 50 3 50 3 42 3 33 3 34 3 33 3 34 3 50 350 3 50 318 3 18 3 18 3 18 3 42 3 34 3 34 3 15 3 15 1 51, 318 1 51, 318 10-027 . . . . . . . . . . . . . . . . . . 10-058 . . . . . . . . . . . . . . . . . 10-064 . . . . . . . . . . . . . . . . . 10-072 1316 . . . . . . . . . . . . . 10-072 xx . . . . . . . . . . . . . . 10-073 . . . . . . . . . . . . . . . . . . 10-075 . . . . . . . . . . . . . . . . . 10-078 . . . . . . . . . . . . . . . . . 10-079 . . . . . . . . . . . . . . . . . 10-087 . . . . . . . . . . . . . . . . . 10-091 . . . . . . . . . . . . . . . . . . 10-092 . . . . . . . . . . . . . . . . . 10-094 . . . . . . . . . . . . . . . . . 10-095 . . . . . . . . . . . . . . . . . 10-103 . . . . . . . . . . . . . . . . . . 10-104 . . . . . . . . . . . . . . . . . . 10-108 . . . . . . . . . . . . . . . . . . 10-109 . . . . . . . . . . . . . . . . . . 10-112 . . . . . . . . . . . . . . . . . . . 10-116 . . . . . . . . . . . . . . . . . . 10-121 . . . . . . . . . . . . . . . . . . . 10-122 . . . . . . . . . . . . . . . . . . 10-123 . . . . . . . . . . . . . . . . . . 10-124 . . . . . . . . . . . . . . . . . . 10-140 . . . . . . . . . . . . . . . . . . 10-141 . . . . . . . . . . . . . . . . . . 10-142 . . . . . . . . . . . . . . . . . . 10-143 . . . . . . . . . . . . . . . . . . 10-144 . . . . . . . . . . . . . . . . . . 10-145 . . . . . . . . . . . . . . . . . . 11-068 . . . . . . . . . . . . . . . . . . 11-069 . . . . . . . . . . . . . . . . . . 11-085 . . . . . . . . . . . . . . . . . . 11-088 . . . . . . . . . . . . . . . . . . 11-091 . . . . . . . . . . . . . . . . . . 11-092 . . . . . . . . . . . . . . . . . . 11-096 . . . . . . . . . . . . . . . . . . 11-103 . . . . . . . . . . . . . . . . . . . 11-104 . . . . . . . . . . . . . . . . . . 11-105 . . . . . . . . . . . . . . . . . . . 11-110 . . . . . . . . . . . . . . . . . . . 11-111 . . . . . . . . . . . . . . . . . . . . 11-112 . . . . . . . . . . . . . . . . . . . 11-113 . . . . . . . . . . . . . . . . . . . 11-116 . . . . . . . . . . . . . . . . . . . 11-118 . . . . . . . . . . . . . . . . . . . 12-100 . . . . . . . . . . . . . . . . . . 12-103 . . . . . . . . . . . . . . . . . . 12-287 . . . . . . . . . . . . . . . . . . 12-288 . . . . . . . . . . . . . . . . . . 12-289 . . . . . . . . . . . . . . . . . . 12-290 . . . . . . . . . . . . . . . . . . 12-291 . . . . . . . . . . . . . . . . . . Price Book 8 430 Effective April 4, 2020 • Rev. 04/20 Part Number 20-189 . . . . . . . . . . . . . . . . . 20-189-XP . . . . . . . . . . . . . . 20-190 . . . . . . . . . . . . . . . . . 20-190-XP . . . . . . . . . . . . . 20-191 . . . . . . . . . . . . . . . . . . 20-191-XP . . . . . . . . . . . . . . 20-200 . . . . . . . . . . . . . . . . . 20-201 . . . . . . . . . . . . . . . . . 20-202 . . . . . . . . . . . . . . . . . 20-203 . . . . . . . . . . . . . . . . . 20-204 . . . . . . . . . . . . . . . . . 20-205 . . . . . . . . . . . . . . . . . 20-206 . . . . . . . . . . . . . . . . . 20-207 . . . . . . . . . . . . . . . . . 20-208 . . . . . . . . . . . . . . . . . 20-209 . . . . . . . . . . . . . . . . . 20-210 . . . . . . . . . . . . . . . . . 20-211 . . . . . . . . . . . . . . . . . . 20-212 . . . . . . . . . . . . . . . . . . 20-213 . . . . . . . . . . . . . . . . . . 20-214 . . . . . . . . . . . . . . . . . . 20-215 . . . . . . . . . . . . . . . . . . 20-216 . . . . . . . . . . . . . . . . . 20-217 . . . . . . . . . . . . . . . . . . 20-218 . . . . . . . . . . . . . . . . . 20-219 . . . . . . . . . . . . . . . . . 20-220 . . . . . . . . . . . . . . . . . 20-221 . . . . . . . . . . . . . . . . . . 20-222 . . . . . . . . . . . . . . . . . 20-223 . . . . . . . . . . . . . . . . . 20-224 . . . . . . . . . . . . . . . . . 20-225 . . . . . . . . . . . . . . . . . 20-226 . . . . . . . . . . . . . . . . . 20-227 . . . . . . . . . . . . . . . . . 20-228 . . . . . . . . . . . . . . . . . 20-229 . . . . . . . . . . . . . . . . . 20-500 . . . . . . . . . . . . . . . . . 20-500-XP . . . . . . . . . . . . . 20-501 . . . . . . . . . . . . . . . . . 20-501-XP . . . . . . . . . . . . . . 20-505 . . . . . . . . . . . . . . . . . 20-505-XP . . . . . . . . . . . . . 20-506 . . . . . . . . . . . . . . . . . 20-506-XP . . . . . . . . . . . . . 20-508 . . . . . . . . . . . . . . . . . 20-508-XP . . . . . . . . . . . . . 20-509 . . . . . . . . . . . . . . . . . 20-509-XP . . . . . . . . . . . . . 20-510 . . . . . . . . . . . . . . . . . 20-510-XP . . . . . . . . . . . . . . 20-515 . . . . . . . . . . . . . . . . . 20-515-XP . . . . . . . . . . . . . . 20-516 . . . . . . . . . . . . . . . . . 20-516-XP . . . . . . . . . . . . . . 20-517 . . . . . . . . . . . . . . . . . . 20-517-XP . . . . . . . . . . . . . . 20-518 . . . . . . . . . . . . . . . . . 20-518-XP . . . . . . . . . . . . . . 20-519 . . . . . . . . . . . . . . . . . 20-519-XP . . . . . . . . . . . . . . 20-520 . . . . . . . . . . . . . . . . . 20-520-XP . . . . . . . . . . . . . 20-523 . . . . . . . . . . . . . . . . . 20-523-XP . . . . . . . . . . . . . 20-524 . . . . . . . . . . . . . . . . . 20-524-122 . . . . . . . . . . . . . 20-524-122-XP . . . . . . . . . Page Number 151, 318 151, 318 151, 318 151, 318 151, 318 151, 318 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 309 211, 328 211, 328 211, 328 211, 328 347 347 329 329 329 329 341 341 341 341 211, 328 211, 328 341 341 211, 235, 328 211, 235, 328 329 329 345 345 345 345 346 346 69, 109, 310, 312 69, 310 310 INDEX Part Number 69, 109, 310, 312 69 345 345 345 345 83, 312, 340 83, 312, 340 139, 320 139, 320 320 320 320 320 345 345 164, 325 164, 325 164, 325 164, 325 164, 325 164, 325 151, 164, 318, 325 151, 164, 318, 325 151, 164, 318, 325 151, 164, 318, 325 346 346 109, 312 109, 312 311, 313, 340 311, 313, 340 256, 276, 314 256, 276, 314 311 311 345 345 126, 313 126, 313 315 315 315 315 211, 235, 328 211, 235, 328 331 331 211, 235, 328 211, 235, 328 211, 328 211, 328 211, 328 211, 328 347 347 329 329 329 329 341 341 341 341 211, 328 211, 328 341 Part Number Page Number 20-716-XP . . . . . . . . . . . . . . 20-717 . . . . . . . . . . . . . . . . . . 20-717-XP . . . . . . . . . . . . . . 20-718 . . . . . . . . . . . . . . . . . . 20-718-XP . . . . . . . . . . . . . . 20-719 . . . . . . . . . . . . . . . . . . 20-719-XP . . . . . . . . . . . . . . 20-720 . . . . . . . . . . . . . . . . . 20-720-XP . . . . . . . . . . . . . 20-722 . . . . . . . . . . . . . . . . . 20-722-XP . . . . . . . . . . . . . . 20-723 . . . . . . . . . . . . . . . . . 20-723-XP . . . . . . . . . . . . . . 20-724 . . . . . . . . . . . . . . . . . 20-724-122 . . . . . . . . . . . . . 20-724-122-XP . . . . . . . . . . 20-724-XP . . . . . . . . . . . . . . 20-726 . . . . . . . . . . . . . . . . . 20-726-XP . . . . . . . . . . . . . 20-727 . . . . . . . . . . . . . . . . . . 20-727-XP . . . . . . . . . . . . . . 20-728 . . . . . . . . . . . . . . . . . 20-728-XP . . . . . . . . . . . . . 20-729 . . . . . . . . . . . . . . . . . 20-729-XP . . . . . . . . . . . . . 20-730 . . . . . . . . . . . . . . . . . 20-730-XP . . . . . . . . . . . . . 20-731 . . . . . . . . . . . . . . . . . . 20-731-XP . . . . . . . . . . . . . . 20-739 . . . . . . . . . . . . . . . . . 20-739-XP . . . . . . . . . . . . . 20-740 . . . . . . . . . . . . . . . . . 20-740-XP . . . . . . . . . . . . . 20-741 . . . . . . . . . . . . . . . . . . 20-741-XP . . . . . . . . . . . . . . 20-742 . . . . . . . . . . . . . . . . . 20-742-XP . . . . . . . . . . . . . . 20-743 . . . . . . . . . . . . . . . . . 20-743-XP . . . . . . . . . . . . . . 20-744 . . . . . . . . . . . . . . . . . 20-744-XP . . . . . . . . . . . . . 20-745 . . . . . . . . . . . . . . . . . 20-745-XP . . . . . . . . . . . . . . 20-746 . . . . . . . . . . . . . . . . . 20-746-XP . . . . . . . . . . . . . 20-747 . . . . . . . . . . . . . . . . . . 20-747-XP . . . . . . . . . . . . . . 20-748 . . . . . . . . . . . . . . . . . 20-748-XP . . . . . . . . . . . . . 20-750 . . . . . . . . . . . . . . . . . 20-750-XP . . . . . . . . . . . . . 20-752 . . . . . . . . . . . . . . . . . 20-752-XP . . . . . . . . . . . . . . 20-757 . . . . . . . . . . . . . . . . . . 20-757-XP . . . . . . . . . . . . . . 20-762 . . . . . . . . . . . . . . . . . 20-762-XP . . . . . . . . . . . . . . 20-763 . . . . . . . . . . . . . . . . . 20-763-XP . . . . . . . . . . . . . 20-765 . . . . . . . . . . . . . . . . . 20-765-XP . . . . . . . . . . . . . 20-766 . . . . . . . . . . . . . . . . . 20-766-XP . . . . . . . . . . . . . 20-771 . . . . . . . . . . . . . . . . . . 20-771-XP . . . . . . . . . . . . . . 20-772 . . . . . . . . . . . . . . . . . . 20-772-XP . . . . . . . . . . . . . . 3 41 211, 235, 328 211, 235, 328 329 329 345 3 45 345 345 334 334 346 346 69, 109, 310, 312 69, 310 310 69, 109, 310, 312 345 345 345 345 83, 312, 340 83, 312, 340 139, 320 139 320 320 320 320 345 345 272, 343 343 343 343 164, 324 164, 324 164, 324 164, 324 164, 324 164, 324 151, 164, 318, 324 151, 164, 318, 324 151, 164, 318, 324 151, 164, 318, 324 346 346 109, 312 109, 312 311, 313, 340 311, 313, 340 256, 272, 276, 314 256, 276, 314 342 342 345 345 333 333 126, 313 126, 313 334 334 333 333 315 315 Part Number 20-774 . . . . . . . . . . . . . . . . . 20-774-XP . . . . . . . . . . . . . . 20-776 . . . . . . . . . . . . . . . . . 20-776-XP . . . . . . . . . . . . . . 20-782 . . . . . . . . . . . . . . . . . 20-782-XP . . . . . . . . . . . . . . 20-783 . . . . . . . . . . . . . . . . . 20-783-XP . . . . . . . . . . . . . 20-787 . . . . . . . . . . . . . . . . . 20-787-XP . . . . . . . . . . . . . . 20-789 . . . . . . . . . . . . . . . . . 20-789-XP . . . . . . . . . . . . . 20-793 . . . . . . . . . . . . . . . . . 20-793-XP . . . . . . . . . . . . . 20-798 . . . . . . . . . . . . . . . . . 20-798-XP . . . . . . . . . . . . . 20-854 . . . . . . . . . . . . . . . . . 20-854-XP . . . . . . . . . . . . . 21-002 . . . . . . . . . . . . . . . . . 21-002-122 . . . . . . . . . . . . . 21-003 . . . . . . . . . . . . . . . . . 21-003-098 . . . . . . . . . . . . 21-003-168 . . . . . . . . . . . . . 21-020 . . . . . . . . . . . . . . . . . 21-021 . . . . . . . . . . . . . . . . . . 21-059 . . . . . . . . . . . . . . . . . 22-001 . . . . . . . . . . . . . . . . . 22-002 . . . . . . . . . . . . . . . . . 22-003 . . . . . . . . . . . . . . . . . 22-004 . . . . . . . . . . . . . . . . . 22-017 . . . . . . . . . . . . . . . . . . 22-018 . . . . . . . . . . . . . . . . . 22-019 . . . . . . . . . . . . . . . . . 22-020 . . . . . . . . . . . . . . . . . 22-061 . . . . . . . . . . . . . . . . . 22-062 . . . . . . . . . . . . . . . . . 22-069 . . . . . . . . . . . . . . . . . 22-081 . . . . . . . . . . . . . . . . . 22-082 . . . . . . . . . . . . . . . . . 22-085 . . . . . . . . . . . . . . . . . 22-086 . . . . . . . . . . . . . . . . . 22-093 . . . . . . . . . . . . . . . . . 22-642 . . . . . . . . . . . . . . . . . 22-643 . . . . . . . . . . . . . . . . . 22-644 . . . . . . . . . . . . . . . . . 22-645 . . . . . . . . . . . . . . . . . 22-646 . . . . . . . . . . . . . . . . . 23-000 . . . . . . . . . . . . . . . . . 23-001 . . . . . . . . . . . . . . . . . 23-003 . . . . . . . . . . . . . . . . . 23-003-098 . . . . . . . . . . . . 23-013 . . . . . . . . . . . . . . . . . . 23-014 . . . . . . . . . . . . . . . . . 23-030 . . . . . . . . . . . . . . . . . 23-030-ICX . . . . . . . . . . . . . 23-031 . . . . . . . . . . . . . . . . . . 23-065 . . . . . . . . . . . . . . . . . 23-118 . . . . . . . . . . . . . . . . . . 24-022 . . . . . . . . . . . . . . . . . 24-031 . . . . . . . . . . . . . . . . . . 24-032 . . . . . . . . . . . . . . . . . 24-033 . . . . . . . . . . . . . . . . . 24-034 . . . . . . . . . . . . . . . . . 24-035 . . . . . . . . . . . . . . . . . 24-119 . . . . . . . . . . . . . . . . . . 24-120 . . . . . . . . . . . . . . . . . . 24-123 . . . . . . . . . . . . . . . . . . Page Number 315 3 15 333 3 33 333 333 333 333 211, 235, 328 211, 235, 328 331 331 211, 235, 328 211, 235, 328 333 333 311 311 69, 109, 310, 312 69, 310 69, 310 312 6 9, 310 83, 312, 340 83, 312 256, 276, 314 139, 320 139, 320 151, 318 151, 318 320 320 320 320 321 321 318 256, 320 320 164, 324 1 64, 324 246, 320 164, 324 164, 324 164, 324 151, 318 151, 318 126, 313 109, 312 109, 312 109 311, 313, 340 313 343 379 343 126, 313 311 345 340 340 340 340 340 345 345 346 PARTS INDEX 20-524-XP . . . . . . . . . . . . . 20-524-XP-122 . . . . . . . . . 20-526 . . . . . . . . . . . . . . . . . 20-526-XP . . . . . . . . . . . . . 20-527 . . . . . . . . . . . . . . . . . 20-527-XP . . . . . . . . . . . . . . 20-528 . . . . . . . . . . . . . . . . . 20-528-XP . . . . . . . . . . . . . 20-529 . . . . . . . . . . . . . . . . . 20-529-XP . . . . . . . . . . . . . 20-530 . . . . . . . . . . . . . . . . . 20-530-XP . . . . . . . . . . . . . 20-531 . . . . . . . . . . . . . . . . . . 20-531-XP . . . . . . . . . . . . . . 20-539 . . . . . . . . . . . . . . . . . 20-539-XP . . . . . . . . . . . . . 20-542 . . . . . . . . . . . . . . . . . 20-542-XP . . . . . . . . . . . . . 20-543 . . . . . . . . . . . . . . . . . 20-543-XP . . . . . . . . . . . . . 20-544 . . . . . . . . . . . . . . . . . 20-544-XP . . . . . . . . . . . . . 20-545 . . . . . . . . . . . . . . . . . 20-545-XP . . . . . . . . . . . . . 20-546 . . . . . . . . . . . . . . . . . 20-546-XP . . . . . . . . . . . . . 20-547 . . . . . . . . . . . . . . . . . 20-547-XP . . . . . . . . . . . . . 20-548 . . . . . . . . . . . . . . . . . 20-548-XP . . . . . . . . . . . . . 20-550 . . . . . . . . . . . . . . . . . 20-550-XP . . . . . . . . . . . . . 20-552 . . . . . . . . . . . . . . . . . 20-552-XP . . . . . . . . . . . . . 20-554 . . . . . . . . . . . . . . . . . 20-554-XP . . . . . . . . . . . . . 20-562 . . . . . . . . . . . . . . . . . 20-562-XP . . . . . . . . . . . . . 20-565 . . . . . . . . . . . . . . . . . 20-565-XP . . . . . . . . . . . . . 20-572 . . . . . . . . . . . . . . . . . 20-572-XP . . . . . . . . . . . . . . 20-574 . . . . . . . . . . . . . . . . . 20-574-XP . . . . . . . . . . . . . 20-587 . . . . . . . . . . . . . . . . . 20-587-XP . . . . . . . . . . . . . 20-589 . . . . . . . . . . . . . . . . . 20-589-XP . . . . . . . . . . . . . 20-593 . . . . . . . . . . . . . . . . . 20-593-XP . . . . . . . . . . . . . 20-700 . . . . . . . . . . . . . . . . . 20-700-XP . . . . . . . . . . . . . 20-701 . . . . . . . . . . . . . . . . . . 20-701-XP . . . . . . . . . . . . . . 20-705 . . . . . . . . . . . . . . . . . 20-705-XP . . . . . . . . . . . . . 20-706 . . . . . . . . . . . . . . . . . 20-706-XP . . . . . . . . . . . . . 20-708 . . . . . . . . . . . . . . . . . 20-708-XP . . . . . . . . . . . . . 20-709 . . . . . . . . . . . . . . . . . 20-709-XP . . . . . . . . . . . . . 20-710 . . . . . . . . . . . . . . . . . . 20-710-XP . . . . . . . . . . . . . . 20-715 . . . . . . . . . . . . . . . . . . 20-715-XP . . . . . . . . . . . . . . 20-716 . . . . . . . . . . . . . . . . . . Page Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 431 PARTS INDEX INDEX Part Number Page Number Part Number Page Number 24-126 . . . . . . . . . . . . . . . . . . 24-127 . . . . . . . . . . . . . . . . . . 24-139 . . . . . . . . . . . . . . . . . . 24-147 . . . . . . . . . . . . . . . . . . 24-561 . . . . . . . . . . . . . . . . . . 24-561-XP . . . . . . . . . . . . . . 24-562 . . . . . . . . . . . . . . . . . 24-562-XP . . . . . . . . . . . . . 24-563 . . . . . . . . . . . . . . . . . 24-563-XP . . . . . . . . . . . . . 24-564 . . . . . . . . . . . . . . . . . 24-564-XP . . . . . . . . . . . . . 24-565 . . . . . . . . . . . . . . . . . 24-565-XP . . . . . . . . . . . . . 24-567 . . . . . . . . . . . . . . . . . 24-567-XP . . . . . . . . . . . . . . 24-569 . . . . . . . . . . . . . . . . . 24-569-XP . . . . . . . . . . . . . 24-570 . . . . . . . . . . . . . . . . . 24-570-XP . . . . . . . . . . . . . 24-761 . . . . . . . . . . . . . . . . . . 24-761-XP . . . . . . . . . . . . . . 24-762 . . . . . . . . . . . . . . . . . 24-762-XP . . . . . . . . . . . . . . 24-763 . . . . . . . . . . . . . . . . . 24-763-XP . . . . . . . . . . . . . . 24-764 . . . . . . . . . . . . . . . . . 24-764-XP . . . . . . . . . . . . . 24-765 . . . . . . . . . . . . . . . . . 24-765-XP . . . . . . . . . . . . . . 24-767 . . . . . . . . . . . . . . . . . . 24-767-XP . . . . . . . . . . . . . . 24-769 . . . . . . . . . . . . . . . . . 24-769-XP . . . . . . . . . . . . . . 24-770 . . . . . . . . . . . . . . . . . 24-770-XP . . . . . . . . . . . . . . 26-021 . . . . . . . . . . . . . . . . . 26-023 . . . . . . . . . . . . . . . . . 26-064 . . . . . . . . . . . . . . . . . 26-072 . . . . . . . . . . . . . . . . . 26-073 . . . . . . . . . . . . . . . . . 26-091 . . . . . . . . . . . . . . . . . 26-094 . . . . . . . . . . . . . . . . . 26-098 . . . . . . . . . . . . . . . . . 26-101 . . . . . . . . . . . . . . . . . . 26-102 . . . . . . . . . . . . . . . . . 26-103 . . . . . . . . . . . . . . . . . 26-104 . . . . . . . . . . . . . . . . . 26-105 . . . . . . . . . . . . . . . . . 26-106 . . . . . . . . . . . . . . . . . 26-107 . . . . . . . . . . . . . . . . . . 30-000 . . . . . . . . . . . . . . . . 30-001 . . . . . . . . . . . . . . . . . 30-002 . . . . . . . . . . . . . . . . . 30-004 . . . . . . . . . . . . . . . . 30-005 . . . . . . . . . . . . . . . . . 30-007 . . . . . . . . . . . . . . . . . 30-008 . . . . . . . . . . . . . . . . 30-010 . . . . . . . . . . . . . . . . . 30-016 . . . . . . . . . . . . . . . . . 30-019 . . . . . . . . . . . . . . . . . 30-021 . . . . . . . . . . . . . . . . . 30-022 . . . . . . . . . . . . . . . . . 30-030 . . . . . . . . . . . . . . . . . 30-032 . . . . . . . . . . . . . . . . . 30-120 . . . . . . . . . . . . . . . . . 30-121 . . . . . . . . . . . . . . . . . . 3 45 3 45 3 45 3 46 340 3 40 340 340 340 340 3 40 340 340 340 331 3 31 2 56, 320 256, 320 320 320 3 40 3 40 340 3 40 340 3 40 340 340 340 340 3 31 3 31 256, 320 256, 320 320 320 211, 328, 337 331, 337 333 329 329 333 333 3 34 3 33 333 333 335 335 335 3 35 3 28 211, 235, 328, 337 211, 328, 337 331, 337 3 31, 337 3 33 3 33 333 333 328 211, 235, 328, 337 2 11, 328, 337 333 3 33 343 3 43 30-137 . . . . . . . . . . . . . . . . . . 30-138 . . . . . . . . . . . . . . . . . 30-140 . . . . . . . . . . . . . . . . . 33-005 . . . . . . . . . . . . . . . . . 33-007 . . . . . . . . . . . . . . . . . 33-058 . . . . . . . . . . . . . . . . . 33-059 . . . . . . . . . . . . . . . . . 33-059-149 . . . . . . . . . . . . . 33-060 . . . . . . . . . . . . . . . . . 33-065 . . . . . . . . . . . . . . . . . 33-080 . . . . . . . . . . . . . . . . . 33-081 . . . . . . . . . . . . . . . . . 33-119 . . . . . . . . . . . . . . . . . . 3 33 333 3 33 3 56 3 45, 346, 356 3 56 3 56 3 56 3 45, 356 3 56 3 45, 356 3 45, 356 3 10, 312, 313, 314, 315, 318, 324, 340, 345, 356 3 56 3 11 3 10, 311, 312, 313, 314, 315, 318, 324, 340, 345, 356 3 10, 311, 312, 313, 314, 315, 318, 340, 345, 350, 356 3 10, 311, 312, 313, 314, 315, 318, 340, 345, 350, 356 3 56 3 10, 311, 312, 313, 314, 315, 318, 325, 340, 345, 356 356 3 45, 346, 356 3 45, 346, 356 3 24, 356 3 24, 356 3 10, 311, 312, 313, 314, 315, 318, 324, 345, 356, 357 3 10, 311, 312, 313, 314, 315, 318, 324, 345, 356, 357 3 10, 312, 313, 356 3 45, 346 3 10, 311, 312, 313, 314, 315, 318, 325, 340, 345, 356 345, 356 3 45, 356 3 45, 346, 356 3 45, 346, 356 3 45, 346, 356 3 45, 356 3 50, 356 3 50, 356 3 10, 312, 313, 356 3 56 3 50, 356 3 50, 356 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 3 52 33-133 . . . . . . . . . . . . . . . . . . 33-134 . . . . . . . . . . . . . . . . . . 33-136 . . . . . . . . . . . . . . . . . . 33-137 . . . . . . . . . . . . . . . . . . 33-138 . . . . . . . . . . . . . . . . . . 33-139 . . . . . . . . . . . . . . . . . . 33-154 . . . . . . . . . . . . . . . . . . 33-160 . . . . . . . . . . . . . . . . . 33-162 . . . . . . . . . . . . . . . . . . 33-163 . . . . . . . . . . . . . . . . . . 33-167 . . . . . . . . . . . . . . . . . . 33-186 . . . . . . . . . . . . . . . . . . 33-213 . . . . . . . . . . . . . . . . . . 33-214 . . . . . . . . . . . . . . . . . . 33-216 . . . . . . . . . . . . . . . . . . 33-219 . . . . . . . . . . . . . . . . . . 33-221 . . . . . . . . . . . . . . . . . . 33-222 . . . . . . . . . . . . . . . . . 33-223 . . . . . . . . . . . . . . . . . 33-224 . . . . . . . . . . . . . . . . . 33-225 . . . . . . . . . . . . . . . . . 33-231 . . . . . . . . . . . . . . . . . . 33-232 . . . . . . . . . . . . . . . . . 33-233 . . . . . . . . . . . . . . . . . 33-234 . . . . . . . . . . . . . . . . . 33-235 . . . . . . . . . . . . . . . . . 33-236 . . . . . . . . . . . . . . . . . 33-616 . . . . . . . . . . . . . . . . . . 33-806 . . . . . . . . . . . . . . . . . 34-001 . . . . . . . . . . . . . . . . . 34-002 . . . . . . . . . . . . . . . . . 34-003 . . . . . . . . . . . . . . . . . 34-004 . . . . . . . . . . . . . . . . . 34-005 . . . . . . . . . . . . . . . . . 34-006 . . . . . . . . . . . . . . . . . 34-007 . . . . . . . . . . . . . . . . . 34-058 . . . . . . . . . . . . . . . . . 34-101 . . . . . . . . . . . . . . . . . . 34-102 . . . . . . . . . . . . . . . . . . 34-103 . . . . . . . . . . . . . . . . . . 34-202 . . . . . . . . . . . . . . . . . 34-203 . . . . . . . . . . . . . . . . . 34-204 . . . . . . . . . . . . . . . . . 34-205 . . . . . . . . . . . . . . . . . 34-206 . . . . . . . . . . . . . . . . . 34-207 . . . . . . . . . . . . . . . . . Price Book 8 432 Effective April 4, 2020 • Rev. 04/20 Part Number 34-208 . . . . . . . . . . . . . . . . . 34-209 . . . . . . . . . . . . . . . . . 34-300 . . . . . . . . . . . . . . . . . 34-301 . . . . . . . . . . . . . . . . . . 34-302 . . . . . . . . . . . . . . . . . 34-303 . . . . . . . . . . . . . . . . . 34-304 . . . . . . . . . . . . . . . . . 34-305 . . . . . . . . . . . . . . . . . 34-306 . . . . . . . . . . . . . . . . . 34-307 . . . . . . . . . . . . . . . . . 34-308 . . . . . . . . . . . . . . . . . 34-309 . . . . . . . . . . . . . . . . . 34-401 . . . . . . . . . . . . . . . . . 34-800 . . . . . . . . . . . . . . . . . 34-801 . . . . . . . . . . . . . . . . . 34-802 . . . . . . . . . . . . . . . . . 34-803 . . . . . . . . . . . . . . . . . 34-804 . . . . . . . . . . . . . . . . . 34-805 . . . . . . . . . . . . . . . . . 34-806 . . . . . . . . . . . . . . . . . 34-807 . . . . . . . . . . . . . . . . . 34-808 . . . . . . . . . . . . . . . . . 34-809 . . . . . . . . . . . . . . . . . 34-902 . . . . . . . . . . . . . . . . . 34-903 . . . . . . . . . . . . . . . . . 34-904 . . . . . . . . . . . . . . . . . 34-905 . . . . . . . . . . . . . . . . . 34-906 . . . . . . . . . . . . . . . . . 34-907 . . . . . . . . . . . . . . . . . 34-908 . . . . . . . . . . . . . . . . . 34-909 . . . . . . . . . . . . . . . . . 34-910 . . . . . . . . . . . . . . . . . 34-911 . . . . . . . . . . . . . . . . . . 34-912 . . . . . . . . . . . . . . . . . . 34-913 . . . . . . . . . . . . . . . . . . 34-914 . . . . . . . . . . . . . . . . . 34-915 . . . . . . . . . . . . . . . . . . 34-916 . . . . . . . . . . . . . . . . . 34-917 . . . . . . . . . . . . . . . . . . 34-918 . . . . . . . . . . . . . . . . . 34-919 . . . . . . . . . . . . . . . . . 34-950 . . . . . . . . . . . . . . . . . 34-952 . . . . . . . . . . . . . . . . . 35-002 . . . . . . . . . . . . . . . . . 35-003 . . . . . . . . . . . . . . . . . 35-004 . . . . . . . . . . . . . . . . . 35-004-XP . . . . . . . . . . . . . 35-005 . . . . . . . . . . . . . . . . . 35-005-XP . . . . . . . . . . . . . 35-006 . . . . . . . . . . . . . . . . . 35-006-XP . . . . . . . . . . . . . 35-007 . . . . . . . . . . . . . . . . . 35-008 . . . . . . . . . . . . . . . . . 35-009 . . . . . . . . . . . . . . . . . 35-012 . . . . . . . . . . . . . . . . . . 35-012-XP . . . . . . . . . . . . . . 35-013 . . . . . . . . . . . . . . . . . . 35-013-XP . . . . . . . . . . . . . . 35-015 . . . . . . . . . . . . . . . . . 35-016 . . . . . . . . . . . . . . . . . 35-019 . . . . . . . . . . . . . . . . . 35-019-XP . . . . . . . . . . . . . . 35-021 . . . . . . . . . . . . . . . . . . 35-039 . . . . . . . . . . . . . . . . . 35-052 . . . . . . . . . . . . . . . . . 35-052-XP . . . . . . . . . . . . . 35-053 . . . . . . . . . . . . . . . . . Page Number 352 352 352 352 352 352 352 352 352 352 352 352 352, 421 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 353 364 364 370 371 370 371 370 371 364 375 364 370 371 370 371 364 364 370 371 365 375 368 369 368 INDEX Part Number 369 362 375 362 362 362 375 362 362 362 375 375 375 368 369 368 369 362 362 383 372 373 362 362 362 362 368 369 368 369 368 369 368 368, 369 372 373 372 373 372 373 372 373 376 376 376 376 376 375 375 375 367 366 366 366 366 366 366 372 373 375 365 367 365 374 374 374 374 Part Number Page Number 35-425 . . . . . . . . . . . . . . . . . 35-426 . . . . . . . . . . . . . . . . . 35-427-XP . . . . . . . . . . . . . . 35-429 . . . . . . . . . . . . . . . . . 35-430 . . . . . . . . . . . . . . . . . 35-431-XP . . . . . . . . . . . . . . 36-066 . . . . . . . . . . . . . . . . . 36-067 . . . . . . . . . . . . . . . . . 36-068 . . . . . . . . . . . . . . . . . 36-069 . . . . . . . . . . . . . . . . . 36-070 . . . . . . . . . . . . . . . . . 36-071 . . . . . . . . . . . . . . . . . . 36-072 . . . . . . . . . . . . . . . . . 36-079 . . . . . . . . . . . . . . . . . 36-080 . . . . . . . . . . . . . . . . . 36-082 . . . . . . . . . . . . . . . . . 36-083 . . . . . . . . . . . . . . . . . 36-085 . . . . . . . . . . . . . . . . . 36-086 . . . . . . . . . . . . . . . . . 37-001 . . . . . . . . . . . . . . . . . . 37-015 . . . . . . . . . . . . . . . . . . 37-016 . . . . . . . . . . . . . . . . . . 38-016 . . . . . . . . . . . . . . . . . 38-017 . . . . . . . . . . . . . . . . . . 38-018 . . . . . . . . . . . . . . . . . 38-031 . . . . . . . . . . . . . . . . . 38-032 . . . . . . . . . . . . . . . . . 38-033 . . . . . . . . . . . . . . . . . 38-034 . . . . . . . . . . . . . . . . . 38-070 . . . . . . . . . . . . . . . . . 38-090 . . . . . . . . . . . . . . . . . 38-091 . . . . . . . . . . . . . . . . . 38-092 . . . . . . . . . . . . . . . . . 38-093 . . . . . . . . . . . . . . . . . 38-094 . . . . . . . . . . . . . . . . . 38-095 . . . . . . . . . . . . . . . . . 39-029 . . . . . . . . . . . . . . . . . 39-030 . . . . . . . . . . . . . . . . . 365 365 374 367 367 374 322, 342 322 322 322 322 322 322 338 207 338 338 322 319, 321, 322 67, 81, 107, 129 201 148, 149, 160, 161, 245 137 137 68, 108, 275 137, 149 137 347 148, 161 332 209 209 209 209 209 209 428 65, 80, 106, 126, 137, 148, 160, 254, 255, 274 207, 428 420 420 420 420 420 420 420 420 420 421 370, 372 371, 373 368 369 368 369 368 369 417 416 418 417 417 421 417 417 420 39-042 . . . . . . . . . . . . . . . . . 40-015 . . . . . . . . . . . . . . . . . 40-017 . . . . . . . . . . . . . . . . . 40-026 . . . . . . . . . . . . . . . . . 40-029 . . . . . . . . . . . . . . . . . 40-030 . . . . . . . . . . . . . . . . 40-031 . . . . . . . . . . . . . . . . . 40-032 . . . . . . . . . . . . . . . . . 40-035 . . . . . . . . . . . . . . . . . 40-049 . . . . . . . . . . . . . . . . 40-054 . . . . . . . . . . . . . . . . . 40-060 . . . . . . . . . . . . . . . . 40-060-XP . . . . . . . . . . . . . 40-061 . . . . . . . . . . . . . . . . . 40-061-XP . . . . . . . . . . . . . 40-062 . . . . . . . . . . . . . . . . . 40-062-XP . . . . . . . . . . . . . 40-065 . . . . . . . . . . . . . . . . . 40-065-XP . . . . . . . . . . . . . 40-066 . . . . . . . . . . . . . . . . 40-070 . . . . . . . . . . . . . . . . . 40-071 . . . . . . . . . . . . . . . . . 40-074 . . . . . . . . . . . . . . . . . 40-075 . . . . . . . . . . . . . . . . . 40-097 . . . . . . . . . . . . . . . . . 40-099 . . . . . . . . . . . . . . . . 40-104 . . . . . . . . . . . . . . . . . 40-112 . . . . . . . . . . . . . . . . . . Part Number 40-119 . . . . . . . . . . . . . . . . . . 40-128 . . . . . . . . . . . . . . . . . 40-129 . . . . . . . . . . . . . . . . . 40-132 . . . . . . . . . . . . . . . . . . 40-133 . . . . . . . . . . . . . . . . . . 40-134 . . . . . . . . . . . . . . . . . 40-147 . . . . . . . . . . . . . . . . . . 40-148 . . . . . . . . . . . . . . . . . 40-152 . . . . . . . . . . . . . . . . . 40-153 . . . . . . . . . . . . . . . . . 40-158 . . . . . . . . . . . . . . . . . 40-160 . . . . . . . . . . . . . . . . . 40-161 . . . . . . . . . . . . . . . . . . 40-162 . . . . . . . . . . . . . . . . . 40-163 . . . . . . . . . . . . . . . . . 40-164 . . . . . . . . . . . . . . . . . 40-165 . . . . . . . . . . . . . . . . . 40-166 . . . . . . . . . . . . . . . . . 40-167 . . . . . . . . . . . . . . . . . . 40-168 . . . . . . . . . . . . . . . . . 40-169 . . . . . . . . . . . . . . . . . 40-170 . . . . . . . . . . . . . . . . . 40-171 . . . . . . . . . . . . . . . . . . 40-172 . . . . . . . . . . . . . . . . . . 40-173 . . . . . . . . . . . . . . . . . . 40-175 . . . . . . . . . . . . . . . . . . 40-176 . . . . . . . . . . . . . . . . . . 40-177 . . . . . . . . . . . . . . . . . . 40-179 . . . . . . . . . . . . . . . . . . 40-181 . . . . . . . . . . . . . . . . . . 40-223 . . . . . . . . . . . . . . . . . 40-224 . . . . . . . . . . . . . . . . . 40-225 . . . . . . . . . . . . . . . . . 40-226 . . . . . . . . . . . . . . . . . 40-227 . . . . . . . . . . . . . . . . . 40-228 . . . . . . . . . . . . . . . . . 40-247 . . . . . . . . . . . . . . . . . 40-286 . . . . . . . . . . . . . . . . . 40-296 . . . . . . . . . . . . . . . . . 40-400 . . . . . . . . . . . . . . . . 40-600 . . . . . . . . . . . . . . . . 41-005 . . . . . . . . . . . . . . . . . 43-005 . . . . . . . . . . . . . . . . . 44-112 . . . . . . . . . . . . . . . . . . 44-115 . . . . . . . . . . . . . . . . . . 44-161 . . . . . . . . . . . . . . . . . . 44-165 . . . . . . . . . . . . . . . . . 44-166 . . . . . . . . . . . . . . . . . 47-413 . . . . . . . . . . . . . . . . . . 47-414 . . . . . . . . . . . . . . . . . . 47-542 . . . . . . . . . . . . . . . . . 47-542-XP . . . . . . . . . . . . . . 47-543 . . . . . . . . . . . . . . . . . 47-743 . . . . . . . . . . . . . . . . . . 47-743-XP . . . . . . . . . . . . . . 47-744 . . . . . . . . . . . . . . . . . . 47-744-XP . . . . . . . . . . . . . . 48-002 . . . . . . . . . . . . . . . . . 48-003 . . . . . . . . . . . . . . . . . 48-004 . . . . . . . . . . . . . . . . 48-004-XP . . . . . . . . . . . . . 48-005 . . . . . . . . . . . . . . . . . 48-005-XP . . . . . . . . . . . . . 48-006 . . . . . . . . . . . . . . . . 48-006-XP . . . . . . . . . . . . . 48-007 . . . . . . . . . . . . . . . . . 48-008 . . . . . . . . . . . . . . . . Page Number 4 16 418 418 416 416 416 422 422 420 420 420 423 4 23 423 423 423 423 423 423 423 423 423 418 418 418 420 420 420 420 4 18 421 428 366 420 420 420 418 420 418 125 125 65 1 06, 126 427 427 427 427 427 3 15 315 315 315 315 315 315 315 315 364 3 64 370 371 3 70 371 370 371 364 375 PARTS INDEX 35-053-XP . . . . . . . . . . . . . 35-056 . . . . . . . . . . . . . . . . . 35-057 . . . . . . . . . . . . . . . . . 35-076 . . . . . . . . . . . . . . . . . 35-077 . . . . . . . . . . . . . . . . . 35-079 . . . . . . . . . . . . . . . . . 35-097 . . . . . . . . . . . . . . . . . 35-100 . . . . . . . . . . . . . . . . . 35-101 . . . . . . . . . . . . . . . . . . 35-102 . . . . . . . . . . . . . . . . . . 35-104 . . . . . . . . . . . . . . . . . 35-110 . . . . . . . . . . . . . . . . . . 35-111 . . . . . . . . . . . . . . . . . . . 35-115 . . . . . . . . . . . . . . . . . . 35-115-XP . . . . . . . . . . . . . . . 35-116 . . . . . . . . . . . . . . . . . . 35-116-XP . . . . . . . . . . . . . . 35-130 . . . . . . . . . . . . . . . . . . 35-131 . . . . . . . . . . . . . . . . . . 35-135-C . . . . . . . . . . . . . . . . 35-138 . . . . . . . . . . . . . . . . . . 35-138-XP . . . . . . . . . . . . . . 35-140 . . . . . . . . . . . . . . . . . 35-141 . . . . . . . . . . . . . . . . . . 35-143 . . . . . . . . . . . . . . . . . . 35-144 . . . . . . . . . . . . . . . . . . 35-157 . . . . . . . . . . . . . . . . . . 35-157-XP . . . . . . . . . . . . . . 35-158 . . . . . . . . . . . . . . . . . . 35-158-XP . . . . . . . . . . . . . . 35-159 . . . . . . . . . . . . . . . . . . 35-159-XP . . . . . . . . . . . . . . 35-171 . . . . . . . . . . . . . . . . . . 35-172-XP . . . . . . . . . . . . . . 35-199 . . . . . . . . . . . . . . . . . . 35-199-XP . . . . . . . . . . . . . . 35-215 . . . . . . . . . . . . . . . . . . 35-215-XP . . . . . . . . . . . . . . 35-216 . . . . . . . . . . . . . . . . . . 35-216-XP . . . . . . . . . . . . . . 35-218 . . . . . . . . . . . . . . . . . . 35-218-XP . . . . . . . . . . . . . . 35-223 . . . . . . . . . . . . . . . . . 35-224 . . . . . . . . . . . . . . . . . 35-227 . . . . . . . . . . . . . . . . . . 35-228 . . . . . . . . . . . . . . . . . 35-229 . . . . . . . . . . . . . . . . . 35-231 . . . . . . . . . . . . . . . . . . 35-250 . . . . . . . . . . . . . . . . . 35-251 . . . . . . . . . . . . . . . . . . 35-264 . . . . . . . . . . . . . . . . . 35-267 . . . . . . . . . . . . . . . . . 35-268 . . . . . . . . . . . . . . . . . 35-269 . . . . . . . . . . . . . . . . . 35-270 . . . . . . . . . . . . . . . . . 35-271 . . . . . . . . . . . . . . . . . . 35-272 . . . . . . . . . . . . . . . . . . 35-273 . . . . . . . . . . . . . . . . . . 35-273-XP . . . . . . . . . . . . . . 35-289 . . . . . . . . . . . . . . . . . 35-310 . . . . . . . . . . . . . . . . . . 35-400 . . . . . . . . . . . . . . . . . 35-401 . . . . . . . . . . . . . . . . . 35-421-XP . . . . . . . . . . . . . . 35-422-XP . . . . . . . . . . . . . . 35-423-XP . . . . . . . . . . . . . 35-424-XP . . . . . . . . . . . . . Page Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 433 PARTS INDEX INDEX Part Number Page Number Part Number Page Number 48-009 . . . . . . . . . . . . . . . . 48-012 . . . . . . . . . . . . . . . . . 48-012-XP . . . . . . . . . . . . . . 48-013 . . . . . . . . . . . . . . . . . 48-014 . . . . . . . . . . . . . . . . . 48-014-XP . . . . . . . . . . . . . 48-015 . . . . . . . . . . . . . . . . . 48-016 . . . . . . . . . . . . . . . . . 48-019 . . . . . . . . . . . . . . . . . 48-019-XP . . . . . . . . . . . . . 48-020 . . . . . . . . . . . . . . . . . 48-020-XP . . . . . . . . . . . . . 48-021 . . . . . . . . . . . . . . . . . 48-034 . . . . . . . . . . . . . . . . . 48-039 . . . . . . . . . . . . . . . . . 48-052 . . . . . . . . . . . . . . . . . 48-052-XP . . . . . . . . . . . . . 48-053 . . . . . . . . . . . . . . . . . 48-053-XP . . . . . . . . . . . . . 48-056 . . . . . . . . . . . . . . . . . 48-056-ICX . . . . . . . . . . . . 48-076 . . . . . . . . . . . . . . . . . 48-077 . . . . . . . . . . . . . . . . . 48-079 . . . . . . . . . . . . . . . . . 48-097 . . . . . . . . . . . . . . . . . 48-100 . . . . . . . . . . . . . . . . . 48-101 . . . . . . . . . . . . . . . . . . 48-101-ICX . . . . . . . . . . . . . . 48-102 . . . . . . . . . . . . . . . . . 48-104 . . . . . . . . . . . . . . . . . 48-113 . . . . . . . . . . . . . . . . . . 48-114 . . . . . . . . . . . . . . . . . . 48-115 . . . . . . . . . . . . . . . . . . 48-115-XP . . . . . . . . . . . . . . 48-116 . . . . . . . . . . . . . . . . . . 48-116-XP . . . . . . . . . . . . . . 48-130 . . . . . . . . . . . . . . . . . 48-131 . . . . . . . . . . . . . . . . . . 48-140 . . . . . . . . . . . . . . . . . 48-141 . . . . . . . . . . . . . . . . . . 48-143 . . . . . . . . . . . . . . . . . . 48-144 . . . . . . . . . . . . . . . . . 48-157 . . . . . . . . . . . . . . . . . . 48-157-XP . . . . . . . . . . . . . . 48-158 . . . . . . . . . . . . . . . . . 48-158-XP . . . . . . . . . . . . . . 48-159 . . . . . . . . . . . . . . . . . 48-159-XP . . . . . . . . . . . . . . 48-171 . . . . . . . . . . . . . . . . . . 48-171-XP . . . . . . . . . . . . . . 48-172 . . . . . . . . . . . . . . . . . . 48-172-XP . . . . . . . . . . . . . . 48-199 . . . . . . . . . . . . . . . . . 48-199-XP . . . . . . . . . . . . . 48-215 . . . . . . . . . . . . . . . . . . 48-215-XP . . . . . . . . . . . . . . 48-216 . . . . . . . . . . . . . . . . . 48-216-XP . . . . . . . . . . . . . . 48-218 . . . . . . . . . . . . . . . . . 48-218-XP . . . . . . . . . . . . . . 48-223 . . . . . . . . . . . . . . . . . 48-224 . . . . . . . . . . . . . . . . . 48-227 . . . . . . . . . . . . . . . . . 48-228 . . . . . . . . . . . . . . . . . 48-229 . . . . . . . . . . . . . . . . . 48-264 . . . . . . . . . . . . . . . . . 48-267 . . . . . . . . . . . . . . . . . 3 64 370 371 364 372 373 364 364 370 371 3 70 371 365 3 66 3 75 3 68 369 3 68 369 3 63 3 79 363 363 363 375 363, 382 3 63 379 363 375 3 75 3 75 3 68 3 69 368 3 69 363 3 63 363 3 63 3 63 363 3 68 3 69 368 369 368 369 3 68 3 69 3 68 3 69 372 373 372 3 73 372 3 73 372 3 73 376 376 376 3 76 376 3 67 366 48-268 . . . . . . . . . . . . . . . . . 48-269 . . . . . . . . . . . . . . . . . 48-270 . . . . . . . . . . . . . . . . . 48-271 . . . . . . . . . . . . . . . . . . 48-272 . . . . . . . . . . . . . . . . . 48-273 . . . . . . . . . . . . . . . . . 48-273-XP . . . . . . . . . . . . . . 48-289 . . . . . . . . . . . . . . . . . 48-310 . . . . . . . . . . . . . . . . . 48-311 . . . . . . . . . . . . . . . . . . 48-400 . . . . . . . . . . . . . . . . 48-401 . . . . . . . . . . . . . . . . . 48-421-XP . . . . . . . . . . . . . . 48-422-XP . . . . . . . . . . . . . 48-423-XP . . . . . . . . . . . . . 48-424-XP . . . . . . . . . . . . . 48-425 . . . . . . . . . . . . . . . . . 48-426 . . . . . . . . . . . . . . . . . 48-429 . . . . . . . . . . . . . . . . . 48-430 . . . . . . . . . . . . . . . . . 48-431-XP . . . . . . . . . . . . . . 48-432-XP . . . . . . . . . . . . . 49-000 . . . . . . . . . . . . . . . . 49-002 . . . . . . . . . . . . . . . . . 49-003 . . . . . . . . . . . . . . . . . 49-004 . . . . . . . . . . . . . . . . 49-004-XP . . . . . . . . . . . . . 49-005 . . . . . . . . . . . . . . . . . 49-005-XP . . . . . . . . . . . . . 49-007 . . . . . . . . . . . . . . . . . 49-009 . . . . . . . . . . . . . . . . 49-012 . . . . . . . . . . . . . . . . . 49-012-XP . . . . . . . . . . . . . . 49-015 . . . . . . . . . . . . . . . . . 49-016 . . . . . . . . . . . . . . . . . 49-020 . . . . . . . . . . . . . . . . . 49-020-XP . . . . . . . . . . . . . 49-021 . . . . . . . . . . . . . . . . . 49-022 . . . . . . . . . . . . . . . . . 49-023 . . . . . . . . . . . . . . . . . 49-023-XP . . . . . . . . . . . . . 49-052 . . . . . . . . . . . . . . . . . 49-052-XP . . . . . . . . . . . . . 49-053 . . . . . . . . . . . . . . . . . 49-053-XP . . . . . . . . . . . . . 49-056 . . . . . . . . . . . . . . . . . 49-076 . . . . . . . . . . . . . . . . . 49-077 . . . . . . . . . . . . . . . . . 49-079 . . . . . . . . . . . . . . . . . 49-100 . . . . . . . . . . . . . . . . . 49-101 . . . . . . . . . . . . . . . . . . 49-102 . . . . . . . . . . . . . . . . . 49-115 . . . . . . . . . . . . . . . . . . 49-115-XP . . . . . . . . . . . . . . 49-116 . . . . . . . . . . . . . . . . . . 49-116-XP . . . . . . . . . . . . . . 49-130 . . . . . . . . . . . . . . . . . 49-131 . . . . . . . . . . . . . . . . . . 49-140 . . . . . . . . . . . . . . . . . 49-141 . . . . . . . . . . . . . . . . . . 49-143 . . . . . . . . . . . . . . . . . . 49-144 . . . . . . . . . . . . . . . . . 49-157 . . . . . . . . . . . . . . . . . . 49-157-XP . . . . . . . . . . . . . . 49-158 . . . . . . . . . . . . . . . . . 49-158-XP . . . . . . . . . . . . . . 49-171 . . . . . . . . . . . . . . . . . . 3 66 3 66 3 66 3 66 3 66 3 72 3 73 3 75 3 80 3 80 3 67 3 65 3 74 3 74 3 74 3 74 3 65 3 65 3 67 3 67 3 74 3 74 3 67 3 64 3 64 3 70 3 71 3 70 3 71 3 64 3 64 3 70 3 71 3 64 3 64 3 70 3 71 3 65 3 65 3 72 3 73 3 68 3 69 3 68 3 69 3 63 3 63 3 63 3 63 3 63, 382 3 63 3 63 3 68 3 69 3 68 3 69 3 63 3 63 3 63 3 63 3 63 3 63 3 68 3 69 3 68 3 69 3 68 Price Book 8 434 Effective April 4, 2020 • Rev. 04/20 Part Number 49-171-XP . . . . . . . . . . . . . . 49-172 . . . . . . . . . . . . . . . . . . 49-172-XP . . . . . . . . . . . . . . 49-199 . . . . . . . . . . . . . . . . . 49-199-XP . . . . . . . . . . . . . . 49-215 . . . . . . . . . . . . . . . . . . 49-215-XP . . . . . . . . . . . . . . 49-223 . . . . . . . . . . . . . . . . . 49-224 . . . . . . . . . . . . . . . . . 49-227 . . . . . . . . . . . . . . . . . 49-228 . . . . . . . . . . . . . . . . . 49-229 . . . . . . . . . . . . . . . . . 49-264 . . . . . . . . . . . . . . . . . 49-267 . . . . . . . . . . . . . . . . . 49-268 . . . . . . . . . . . . . . . . . 49-269 . . . . . . . . . . . . . . . . . 49-270 . . . . . . . . . . . . . . . . . 49-271 . . . . . . . . . . . . . . . . . . 49-272 . . . . . . . . . . . . . . . . . 49-273 . . . . . . . . . . . . . . . . . 49-273-XP . . . . . . . . . . . . . . 49-355 . . . . . . . . . . . . . . . . . 49-356 . . . . . . . . . . . . . . . . . 49-400 . . . . . . . . . . . . . . . . 49-401 . . . . . . . . . . . . . . . . . 49-421-XP . . . . . . . . . . . . . . 49-422-XP . . . . . . . . . . . . . 49-423-XP . . . . . . . . . . . . . 49-424-XP . . . . . . . . . . . . . 49-425 . . . . . . . . . . . . . . . . . 49-426 . . . . . . . . . . . . . . . . . 49-429 . . . . . . . . . . . . . . . . . 49-430 . . . . . . . . . . . . . . . . . 49-431-XP . . . . . . . . . . . . . . 49-432-XP . . . . . . . . . . . . . 50-001 . . . . . . . . . . . . . . . . . 50-002 . . . . . . . . . . . . . . . . . 50-003 . . . . . . . . . . . . . . . . . 50-120 . . . . . . . . . . . . . . . . . 50-121 . . . . . . . . . . . . . . . . . . 50-122 . . . . . . . . . . . . . . . . . . 50-123 . . . . . . . . . . . . . . . . . . 50-210 . . . . . . . . . . . . . . . . . 50-211 . . . . . . . . . . . . . . . . . . 50-214 . . . . . . . . . . . . . . . . . 50-215 . . . . . . . . . . . . . . . . . . 50-216 . . . . . . . . . . . . . . . . . 50-217 . . . . . . . . . . . . . . . . . . 50-219 . . . . . . . . . . . . . . . . . 50-220 . . . . . . . . . . . . . . . . . 50-221 . . . . . . . . . . . . . . . . . . 50-223 . . . . . . . . . . . . . . . . . 50-224 . . . . . . . . . . . . . . . . . 50-227 . . . . . . . . . . . . . . . . . 50-228 . . . . . . . . . . . . . . . . . 50-229 . . . . . . . . . . . . . . . . . 50-230 . . . . . . . . . . . . . . . . . 50-231 . . . . . . . . . . . . . . . . . . 50-232 . . . . . . . . . . . . . . . . . 50-233 . . . . . . . . . . . . . . . . . 50-600 . . . . . . . . . . . . . . . . 50-700 . . . . . . . . . . . . . . . . . 51-021 . . . . . . . . . . . . . . . . . . 51-022 . . . . . . . . . . . . . . . . . . 51-023 . . . . . . . . . . . . . . . . . . 51-024 . . . . . . . . . . . . . . . . . 51-025 . . . . . . . . . . . . . . . . . Page Number 369 368 369 372 373 372 373 376 376 376 376 376 367 366 366 366 366 366 366 372 373 367 365 367 365 374 374 374 374 365 365 367 367 374 374 381 378 377 384 384 384 384 381 381 385 385 378 377 377 377 377 382 382 385 385 377 383 379, 380 385 377 384 384 79 79 7 9 79 79 INDEX Part Number 79 81 81 81 81 81 385 385 151 151 151 151 151 151 151 151 149, 375 149, 375 254 274 274 254, 274 254, 274 274 274 274 344 380 344 344 344 335 335 336 335 336 335 335 335 336 335 336 335 342 342 335 335 336 335 336 335 342 335 335 336 335 336 335 342 354 354 354 354 354 354 354 354 Part Number Page Number 90-200-2-8 . . . . . . . . . . . . 90-200-4 . . . . . . . . . . . . . . 90-200-4-6 . . . . . . . . . . . . 90-200-4-8 . . . . . . . . . . . . 90-200-6 . . . . . . . . . . . . . . 90-200-6-8 . . . . . . . . . . . . 90-200-8 . . . . . . . . . . . . . . 90-201 . . . . . . . . . . . . . . . . . 90-201-3 . . . . . . . . . . . . . . . 90-201-3-5 . . . . . . . . . . . . . 90-201-3-5-7 . . . . . . . . . . . 90-201-3-5-7-9 . . . . . . . . . 90-201-3-5-9 . . . . . . . . . . . 90-201-3-7 . . . . . . . . . . . . . 90-201-3-9 . . . . . . . . . . . . . 90-201-5 . . . . . . . . . . . . . . . 90-201-5-7 . . . . . . . . . . . . . 90-201-5-7-9 . . . . . . . . . . . 90-201-5-9 . . . . . . . . . . . . . 90-201-7 . . . . . . . . . . . . . . . 90-201-7-9 . . . . . . . . . . . . . 90-201-9 . . . . . . . . . . . . . . . 90-202 . . . . . . . . . . . . . . . . . 90-202-4 . . . . . . . . . . . . . . . 90-202-4-6 . . . . . . . . . . . . 90-202-4-6-8 . . . . . . . . . . 90-202-4-8 . . . . . . . . . . . . 90-202-6 . . . . . . . . . . . . . . 90-202-6-8 . . . . . . . . . . . . 90-202-8 . . . . . . . . . . . . . . 90-203 . . . . . . . . . . . . . . . . . 90-203-5 . . . . . . . . . . . . . . . 90-203-5-7 . . . . . . . . . . . . . 90-203-5-7-9 . . . . . . . . . . 90-203-5-9 . . . . . . . . . . . . 90-203-7 . . . . . . . . . . . . . . . 90-203-7-9 . . . . . . . . . . . . . 90-203-9 . . . . . . . . . . . . . . 90-204 . . . . . . . . . . . . . . . . . 90-204-6 . . . . . . . . . . . . . . 90-204-6-8 . . . . . . . . . . . . 90-204-8 . . . . . . . . . . . . . . 90-205 . . . . . . . . . . . . . . . . . 90-205-7 . . . . . . . . . . . . . . . 90-205-7-9 . . . . . . . . . . . . . 90-205-9 . . . . . . . . . . . . . . 90-206 . . . . . . . . . . . . . . . . . 90-206-8 . . . . . . . . . . . . . . 90-207 . . . . . . . . . . . . . . . . . 90-207-9 . . . . . . . . . . . . . . . 90-208 . . . . . . . . . . . . . . . . . 90-209 . . . . . . . . . . . . . . . . . 91-001 . . . . . . . . . . . . . . . . . . 91-002 . . . . . . . . . . . . . . . . . 91-004 . . . . . . . . . . . . . . . . . 91-005 . . . . . . . . . . . . . . . . . 91-006 . . . . . . . . . . . . . . . . . 91-007 . . . . . . . . . . . . . . . . . 91-008 . . . . . . . . . . . . . . . . . 91-009 . . . . . . . . . . . . . . . . . 91-010 . . . . . . . . . . . . . . . . . . 91-011 . . . . . . . . . . . . . . . . . . 91-014 . . . . . . . . . . . . . . . . . . 91-015 . . . . . . . . . . . . . . . . . . 91-016 . . . . . . . . . . . . . . . . . . 91-017 . . . . . . . . . . . . . . . . . . 91-018 . . . . . . . . . . . . . . . . . . 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 354 315 315 69, 109, 310, 312 69, 310 83, 312 256, 276, 314 139 318 318 318 318 318 109, 312 311, 313 126, 313 Part Number 91-019 . . . . . . . . . . . . . . . . . . 91-020 . . . . . . . . . . . . . . . . . 91-027 . . . . . . . . . . . . . . . . . . 91-028 . . . . . . . . . . . . . . . . . 91-029 . . . . . . . . . . . . . . . . . 91-030 . . . . . . . . . . . . . . . . . 91-031 . . . . . . . . . . . . . . . . . . 91-032 . . . . . . . . . . . . . . . . . 91-042 . . . . . . . . . . . . . . . . . 91-043 . . . . . . . . . . . . . . . . . 91-045 . . . . . . . . . . . . . . . . . 91-046 . . . . . . . . . . . . . . . . . 91-051 . . . . . . . . . . . . . . . . . . 91-059 . . . . . . . . . . . . . . . . . 91-060 . . . . . . . . . . . . . . . . . 91-061 . . . . . . . . . . . . . . . . . . 91-062 . . . . . . . . . . . . . . . . . 91-074 . . . . . . . . . . . . . . . . . . 91-075 . . . . . . . . . . . . . . . . . . 91-129 . . . . . . . . . . . . . . . . . . 91-130 . . . . . . . . . . . . . . . . . . 91-163 . . . . . . . . . . . . . . . . . . 91-165 . . . . . . . . . . . . . . . . . . 91-169 . . . . . . . . . . . . . . . . . . 91-172 . . . . . . . . . . . . . . . . . . 91-173 . . . . . . . . . . . . . . . . . . 91-174 . . . . . . . . . . . . . . . . . . 91-175 . . . . . . . . . . . . . . . . . . 91-194 . . . . . . . . . . . . . . . . . . 91-195 . . . . . . . . . . . . . . . . . . 91-196 . . . . . . . . . . . . . . . . . . 91-197 . . . . . . . . . . . . . . . . . . 91-198 . . . . . . . . . . . . . . . . . . 91-199 . . . . . . . . . . . . . . . . . . 91-200 . . . . . . . . . . . . . . . . . 91-451 . . . . . . . . . . . . . . . . . . 91-453 . . . . . . . . . . . . . . . . . . 91-454 . . . . . . . . . . . . . . . . . 91-501-XP . . . . . . . . . . . . . . 91-502-XP . . . . . . . . . . . . . . 91-504-XP . . . . . . . . . . . . . 91-505-XP . . . . . . . . . . . . . . 91-506-XP . . . . . . . . . . . . . 91-507-XP . . . . . . . . . . . . . . 91-508-XP . . . . . . . . . . . . . 91-512-XP . . . . . . . . . . . . . . 91-514-XP . . . . . . . . . . . . . . 91-518-XP . . . . . . . . . . . . . . 91-519-XP . . . . . . . . . . . . . . 91-520-XP . . . . . . . . . . . . . . 91-521-XP . . . . . . . . . . . . . . 91-532-XP . . . . . . . . . . . . . . 91-533-XP . . . . . . . . . . . . . . 91-534-XP . . . . . . . . . . . . . . 91-535-XP . . . . . . . . . . . . . . 91-536-XP . . . . . . . . . . . . . . 91-542-XP . . . . . . . . . . . . . . 91-543-XP . . . . . . . . . . . . . . 91-544-XP . . . . . . . . . . . . . . 91-545-XP . . . . . . . . . . . . . . 91-546-XP . . . . . . . . . . . . . . 91-551 . . . . . . . . . . . . . . . . . . 91-552 . . . . . . . . . . . . . . . . . . 91-553 . . . . . . . . . . . . . . . . . . 91-554 . . . . . . . . . . . . . . . . . 91-557-XP . . . . . . . . . . . . . . 91-558-XP . . . . . . . . . . . . . . Page Number 3 11 345 345 164, 324 164, 324 164, 324 164, 324 164, 324 345 345 345 346 211, 328 211 330 3 30 211, 328 341 341 328 328 333 333 333 334 333 334 334 3 08 308 308 308 308 308 306 307 307 305 318 3 18 69, 109, 310, 312 69, 310 83, 312 139 345 318 312 126, 313 315 315 311 164, 325 1 64, 325 164, 325 164, 325 1 64, 325 3 45 345 3 46 345 346 307 307 307 305 211, 328 330 PARTS INDEX 51-026 . . . . . . . . . . . . . . . . . 51-037 . . . . . . . . . . . . . . . . . . 51-038 . . . . . . . . . . . . . . . . . 51-039 . . . . . . . . . . . . . . . . . 51-040 . . . . . . . . . . . . . . . . . 51-041 . . . . . . . . . . . . . . . . . . 60-000 . . . . . . . . . . . . . . . . 60-001 . . . . . . . . . . . . . . . . . 61-500 . . . . . . . . . . . . . . . . . 61-501 . . . . . . . . . . . . . . . . . . 61-502 . . . . . . . . . . . . . . . . . 61-503 . . . . . . . . . . . . . . . . . 61-504 . . . . . . . . . . . . . . . . . 61-505 . . . . . . . . . . . . . . . . . 61-506 . . . . . . . . . . . . . . . . . 61-507 . . . . . . . . . . . . . . . . . . 61-509 . . . . . . . . . . . . . . . . . 61-510 . . . . . . . . . . . . . . . . . . 68-001 . . . . . . . . . . . . . . . . . 68-001 xxx . . . . . . . . . . . . . 68-002 xxx . . . . . . . . . . . . . 68-003 . . . . . . . . . . . . . . . . . 68-004 . . . . . . . . . . . . . . . . 68-011 xxx . . . . . . . . . . . . . . 68-012 xxx . . . . . . . . . . . . . 68-013 xxx . . . . . . . . . . . . . 80-033 . . . . . . . . . . . . . . . . . 80-035 . . . . . . . . . . . . . . . . . 80-036 . . . . . . . . . . . . . . . . . 80-037 . . . . . . . . . . . . . . . . . 80-043 . . . . . . . . . . . . . . . . . 80-101 . . . . . . . . . . . . . . . . . . 80-102 . . . . . . . . . . . . . . . . . 80-103 . . . . . . . . . . . . . . . . . 80-104 . . . . . . . . . . . . . . . . . 80-105 . . . . . . . . . . . . . . . . . 80-108 . . . . . . . . . . . . . . . . . 80-109 . . . . . . . . . . . . . . . . . 80-110 . . . . . . . . . . . . . . . . . . 80-111 . . . . . . . . . . . . . . . . . . 80-112 . . . . . . . . . . . . . . . . . . 80-113 . . . . . . . . . . . . . . . . . . 80-115 . . . . . . . . . . . . . . . . . . 80-116 . . . . . . . . . . . . . . . . . . 80-129 . . . . . . . . . . . . . . . . . 80-131 . . . . . . . . . . . . . . . . . . 80-132 . . . . . . . . . . . . . . . . . 80-133 . . . . . . . . . . . . . . . . . 80-134 . . . . . . . . . . . . . . . . . 80-135 . . . . . . . . . . . . . . . . . 80-138 . . . . . . . . . . . . . . . . . 80-159 . . . . . . . . . . . . . . . . . 80-301 . . . . . . . . . . . . . . . . . 80-302 . . . . . . . . . . . . . . . . . 80-303 . . . . . . . . . . . . . . . . . 80-304 . . . . . . . . . . . . . . . . . 80-305 . . . . . . . . . . . . . . . . . 80-308 . . . . . . . . . . . . . . . . . 80-329 . . . . . . . . . . . . . . . . . 90-200 . . . . . . . . . . . . . . . . . 90-200-2 . . . . . . . . . . . . . . 90-200-2-4 . . . . . . . . . . . . 90-200-2-4-6 . . . . . . . . . . 90-200-2-4-6-8 . . . . . . . 90-200-2-4-8 . . . . . . . . . . 90-200-2-6 . . . . . . . . . . . . 90-200-2-6-8 . . . . . . . . . . Page Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 435 PARTS INDEX INDEX Part Number Page Number Part Number Page Number 91-559-XP . . . . . . . . . . . . . . 91-561-XP . . . . . . . . . . . . . . 91-574-XP . . . . . . . . . . . . . . 91-575-XP . . . . . . . . . . . . . . 91-700 . . . . . . . . . . . . . . . . . 91-701-XP . . . . . . . . . . . . . . 91-702-XP . . . . . . . . . . . . . . 91-703-XP . . . . . . . . . . . . . . 91-704-XP . . . . . . . . . . . . . . 91-705-XP . . . . . . . . . . . . . . 91-706-XP . . . . . . . . . . . . . . 91-707-XP . . . . . . . . . . . . . . 91-708-XP . . . . . . . . . . . . . . 91-709-XP . . . . . . . . . . . . . . 91-710-XP . . . . . . . . . . . . . . 91-711-XP . . . . . . . . . . . . . . . 91-712-XP . . . . . . . . . . . . . . . 91-713-XP . . . . . . . . . . . . . . . 91-714-XP . . . . . . . . . . . . . . . 91-715-XP . . . . . . . . . . . . . . . 91-718-XP . . . . . . . . . . . . . . 91-719-XP . . . . . . . . . . . . . . 91-720-XP . . . . . . . . . . . . . . 91-721-XP . . . . . . . . . . . . . . . 91-722-XP . . . . . . . . . . . . . . 91-729-XP . . . . . . . . . . . . . . 91-742-XP . . . . . . . . . . . . . . 91-743-XP . . . . . . . . . . . . . . 91-744-XP . . . . . . . . . . . . . . 91-745-XP . . . . . . . . . . . . . . 91-746-XP . . . . . . . . . . . . . . 91-751-XP . . . . . . . . . . . . . . . 91-757-XP . . . . . . . . . . . . . . 91-758-XP . . . . . . . . . . . . . . 91-759-XP . . . . . . . . . . . . . . 91-772-XP . . . . . . . . . . . . . . 91-774-XP . . . . . . . . . . . . . . 91-775-XP . . . . . . . . . . . . . . 91-874-XP . . . . . . . . . . . . . . 91-875-XP . . . . . . . . . . . . . . 021415 . . . . . . . . . . . . . . . . . . 030730-001 . . . . . . . . . . . . 030730-002 . . . . . . . . . . . 800117 . . . . . . . . . . . . . . . . . . 800119 . . . . . . . . . . . . . . . . . 800120 . . . . . . . . . . . . . . . . . 800121 . . . . . . . . . . . . . . . . . 800123 . . . . . . . . . . . . . . . . . 800128 . . . . . . . . . . . . . . . . . 820406 . . . . . . . . . . . . . . . . 829632-26 . . . . . . . . . . . . . 840088-00 . . . . . . . . . . . . 840613-00 . . . . . . . . . . . . . 840956-04 . . . . . . . . . . . . 840956-25 . . . . . . . . . . . . . 840956-26 . . . . . . . . . . . . . 840956-32 . . . . . . . . . . . . . 840957-04 . . . . . . . . . . . . . 840957-25 . . . . . . . . . . . . . 840957-26 . . . . . . . . . . . . . 840957-32 . . . . . . . . . . . . . 840964-03 . . . . . . . . . . . . 840964-04 . . . . . . . . . . . . 840964-13 . . . . . . . . . . . . . 840964-25 . . . . . . . . . . . . . 840964-26 . . . . . . . . . . . . . 840965-31 . . . . . . . . . . . . . 2 11, 330 2 11, 328 3 41 3 41 306 3 18 3 18 3 18 6 9, 109, 310, 312 6 9, 310 83, 312 1 39 3 45 164, 324 1 64, 324 164, 324 164, 318, 324 1 64, 318, 324 109, 312 3 11, 313 1 26, 313 3 15 3 15, 345 311 2 56, 276 2 56 3 45 3 45 346 3 45 346 2 11, 328 2 11, 328 330 2 11, 330 3 14 3 41 3 41 3 34 3 34 4 20 3 40 3 40 2 88 288 2 88 288 2 88 2 88 3 00 288 2 88 288 2 87 287 2 87 2 87 287 287 287 287 2 87 2 87 287 2 87 2 87 287 840965-32 . . . . . . . . . . . . . 840967-64 . . . . . . . . . . . . . 850410 . . . . . . . . . . . . . . . . . 855101 . . . . . . . . . . . . . . . . . 855118 . . . . . . . . . . . . . . . . . . 855156 . . . . . . . . . . . . . . . . . 994800 . . . . . . . . . . . . . . . . 994862 . . . . . . . . . . . . . . . . 999201 . . . . . . . . . . . . . . . . . 999218 . . . . . . . . . . . . . . . . . 999225 . . . . . . . . . . . . . . . . . 999232 . . . . . . . . . . . . . . . . . 999249 . . . . . . . . . . . . . . . . 999256 . . . . . . . . . . . . . . . . 999263 . . . . . . . . . . . . . . . . 999270 . . . . . . . . . . . . . . . . . 999461 . . . . . . . . . . . . . . . . . 999478 . . . . . . . . . . . . . . . . 23446339 . . . . . . . . . . . . . . 23446347 . . . . . . . . . . . . . . 23538077 . . . . . . . . . . . . . . 23538085 . . . . . . . . . . . . . . 24002693 . . . . . . . . . . . . . . 24085037 . . . . . . . . . . . . . . 24085060 . . . . . . . . . . . . . 24088544 . . . . . . . . . . . . . . 24088551 . . . . . . . . . . . . . . 24302960 . . . . . . . . . . . . . . 24341471 . . . . . . . . . . . . . . . 24353625 . . . . . . . . . . . . . . 24358830 . . . . . . . . . . . . . . 24457715 . . . . . . . . . . . . . . . 24457723 . . . . . . . . . . . . . . . 24483760 . . . . . . . . . . . . . . 24511081 . . . . . . . . . . . . . . . 24594970 . . . . . . . . . . . . . . 24616914 . . . . . . . . . . . . . . . 24616922 . . . . . . . . . . . . . . . 24616930 . . . . . . . . . . . . . . 24624892 . . . . . . . . . . . . . . 24625642 . . . . . . . . . . . . . . 24625667 . . . . . . . . . . . . . . 24625717 . . . . . . . . . . . . . . . 24641714 . . . . . . . . . . . . . . . 24647265 . . . . . . . . . . . . . . 24653917 . . . . . . . . . . . . . . . 24653925 . . . . . . . . . . . . . . 24664997 . . . . . . . . . . . . . . 24665002 . . . . . . . . . . . . . . 24683542 . . . . . . . . . . . . . . 24691750 . . . . . . . . . . . . . . . 24691768 . . . . . . . . . . . . . . . 24691776 . . . . . . . . . . . . . . . 24691784 . . . . . . . . . . . . . . . 24721714 . . . . . . . . . . . . . . . . 24721722 . . . . . . . . . . . . . . . 24750408 . . . . . . . . . . . . . . 24756504 . . . . . . . . . . . . . . 24759599 . . . . . . . . . . . . . . 24759623 . . . . . . . . . . . . . . 24759656 . . . . . . . . . . . . . . 24759664 . . . . . . . . . . . . . . 24792558 . . . . . . . . . . . . . . 24865057 . . . . . . . . . . . . . . 24869893 . . . . . . . . . . . . . . 24869901 . . . . . . . . . . . . . . 46929456 . . . . . . . . . . . . . . 2 87 2 87 2 99 298 2 98 2 99 3 00 3 00 3 00 3 00 3 00 2 99 3 00 3 00 3 00 3 00 2 92, 300 2 92, 300 3 43 3 44 3 16 3 11, 316 4 20 1 28 1 28 1 28 1 28 2 34 4 20 2 09 2 09 2 09 2 09 1 29 2 34 2 30 2 33 2 34 2 34 2 34 2 34 2 34 2 34 2 34 2 33 2 34 2 34 2 33 2 33 2 34 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 33 2 34 2 34 2 34 3 44 Price Book 8 436 Effective April 4, 2020 • Rev. 04/20 Part Number Page Number 48968887 . . . . . . . . . . . . . . 2 33 49001704 . . . . . . . . . . . . . . 234 840964725 . . . . . . . . . . . . 287 A A100-045 . . . . . . . . . . . . . . A100-046 . . . . . . . . . . . . . . A100-047 . . . . . . . . . . . . . . A100-048 . . . . . . . . . . . . . . A100-049 . . . . . . . . . . . . . . A100-050 . . . . . . . . . . . . . . A100-051 . . . . . . . . . . . . . . . A100-052 . . . . . . . . . . . . . . A100-053 . . . . . . . . . . . . . . A100-054 . . . . . . . . . . . . . . A201-330 . . . . . . . . . . . . . . . A201-370 . . . . . . . . . . . . . . . A201-377 . . . . . . . . . . . . . . . A201-399 . . . . . . . . . . . . . . . A201-406 . . . . . . . . . . . . . . A201-558 . . . . . . . . . . . . . . . A201-683 . . . . . . . . . . . . . . . A201-684 . . . . . . . . . . . . . . A201-688 . . . . . . . . . . . . . . A201-690 . . . . . . . . . . . . . . A201-691 . . . . . . . . . . . . . . . A201-811 . . . . . . . . . . . . . . . . A201-812 . . . . . . . . . . . . . . . A201-814 . . . . . . . . . . . . . . . A201-848 . . . . . . . . . . . . . . A201-849 . . . . . . . . . . . . . . A201-934 . . . . . . . . . . . . . . . A301-043 . . . . . . . . . . . . . . . A301-337 . . . . . . . . . . . . . . . A301-338 . . . . . . . . . . . . . . . A301-339 . . . . . . . . . . . . . . . A301-386 . . . . . . . . . . . . . . . A301-387 . . . . . . . . . . . . . . . A301-391 . . . . . . . . . . . . . . . A301-402 . . . . . . . . . . . . . . A301-403 . . . . . . . . . . . . . . A301-404 . . . . . . . . . . . . . . A301-405 . . . . . . . . . . . . . . A301-406 . . . . . . . . . . . . . . A301-409 . . . . . . . . . . . . . . A301-410 . . . . . . . . . . . . . . . A500-00 . . . . . . . . . . . . . . . A500-002 . . . . . . . . . . . . . . A501-161 . . . . . . . . . . . . . . . . A501-167 . . . . . . . . . . . . . . . A501-171 . . . . . . . . . . . . . . . . A501-305 . . . . . . . . . . . . . . . A501-311 . . . . . . . . . . . . . . . . A501-498 . . . . . . . . . . . . . . A501-499 . . . . . . . . . . . . . . A501-565 . . . . . . . . . . . . . . . A501-566 . . . . . . . . . . . . . . A501-567 . . . . . . . . . . . . . . . A501-615 . . . . . . . . . . . . . . . A501-633 . . . . . . . . . . . . . . . A501-693 . . . . . . . . . . . . . . . A501-710 . . . . . . . . . . . . . . . A501-721 . . . . . . . . . . . . . . . . A501-746 . . . . . . . . . . . . . . . A501-766 . . . . . . . . . . . . . . . A501-767 . . . . . . . . . . . . . . . A501-768 . . . . . . . . . . . . . . . 345, 358 345, 358 345, 358 345, 358 345, 358 345, 346, 358 350, 358 345 82 82 68 68, 82 68 68 68 65 3 45, 346 68 68 345, 358 358 69 69 69 358 345, 346 316 3 46 310, 312, 316 310, 316, 345, 346 310, 316 68 68 68 68, 82 68 68 68 68 68 6 8 68 6 8 69 68, 82, 108 83, 109 68, 82 82 68 68 6 7, 81, 107, 129, 137, 149, 161 67, 81, 107, 129, 137, 149, 161 67, 81, 107, 129 68, 82 68 310, 316 68 68, 82 83, 109 65 68 68 INDEX Part Number A508-655 . . . . . . . . . . . . . . A508-660 . . . . . . . . . . . . . . A508-661 . . . . . . . . . . . . . . A508-662 . . . . . . . . . . . . . . A590-158 . . . . . . . . . . . . . . A590-159 . . . . . . . . . . . . . . . A590-180 . . . . . . . . . . . . . . A590-181 . . . . . . . . . . . . . . . A700-003 . . . . . . . . . . . . . . A700-004 . . . . . . . . . . . . . . A700-014 . . . . . . . . . . . . . . A700-015 . . . . . . . . . . . . . . A700-016 . . . . . . . . . . . . . . A700-017 . . . . . . . . . . . . . . . A700-021 . . . . . . . . . . . . . . A700-023 . . . . . . . . . . . . . . A700-028 . . . . . . . . . . . . . . A700-029 . . . . . . . . . . . . . . A700-030 . . . . . . . . . . . . . . A700-031 . . . . . . . . . . . . . . A700-032 . . . . . . . . . . . . . . A700-033 . . . . . . . . . . . . . . A700-034 . . . . . . . . . . . . . . A700-036 . . . . . . . . . . . . . . A700-039 . . . . . . . . . . . . . . A700-041 . . . . . . . . . . . . . . A700-043 . . . . . . . . . . . . . . A700-044 . . . . . . . . . . . . . . A700-045 . . . . . . . . . . . . . . A700-046 . . . . . . . . . . . . . . A700-047 . . . . . . . . . . . . . . A700-048 . . . . . . . . . . . . . . A700-049 . . . . . . . . . . . . . . A700-050 . . . . . . . . . . . . . . A700-051 . . . . . . . . . . . . . . A700-052 . . . . . . . . . . . . . . A700-056 . . . . . . . . . . . . . . 69 69 346 68, 82 69 68, 82 67, 81, 107, 149, 275 68, 82 65 246 310, 316 68 68, 82 68 68 68 316 316 68 68 69 69 340 310, 311, 312, 313, 314, 315, 318, 324, 345, 350, 357, 358 310, 311, 312, 313, 314, 315, 318, 324, 325, 340, 345, 357, 358 310, 311, 312, 313, 314, 315, 318, 324, 345, 346 310, 311, 312, 313, 314, 315, 318, 324, 345 345 68, 82 68, 82 68, 82 68, 82 82 82 82 82 82 68, 82 79 312, 316 81 81 81 312, 316, 340 83 81 81 82 79 79 81 79 79 82 79, 82 81 81 81 81 79 82 Part Number Page Number A700-057 . . . . . . . . . . . . . . A710-001 . . . . . . . . . . . . . . . A710-004 . . . . . . . . . . . . . . A710-007 . . . . . . . . . . . . . . . A710-008 . . . . . . . . . . . . . . A710-020 . . . . . . . . . . . . . . 82 82 82 82 82 82 B B202-269 . . . . . . . . . . . . . . B202-328 . . . . . . . . . . . . . . B202-339 . . . . . . . . . . . . . . B202-369 . . . . . . . . . . . . . . B202-370 . . . . . . . . . . . . . . B202-453 . . . . . . . . . . . . . . B202-509 . . . . . . . . . . . . . . B202-517 . . . . . . . . . . . . . . . B202-557 . . . . . . . . . . . . . . . B202-558 . . . . . . . . . . . . . . B202-560 . . . . . . . . . . . . . . B202-578 . . . . . . . . . . . . . . B202-580 . . . . . . . . . . . . . . B202-671 . . . . . . . . . . . . . . . B202-672 . . . . . . . . . . . . . . . B202-824 . . . . . . . . . . . . . . B202-825 . . . . . . . . . . . . . . B202-957 . . . . . . . . . . . . . . B220-001 . . . . . . . . . . . . . . B220-006 . . . . . . . . . . . . . . B220-032 . . . . . . . . . . . . . . B220-036 . . . . . . . . . . . . . . B220-043 . . . . . . . . . . . . . . B220-050 . . . . . . . . . . . . . . B220-117 . . . . . . . . . . . . . . . . B220-280 . . . . . . . . . . . . . . B220-282 . . . . . . . . . . . . . . B220-284 . . . . . . . . . . . . . . B250PD . . . . . . . . . . . . . . . . B300-057 . . . . . . . . . . . . . . B300-058 . . . . . . . . . . . . . . B300-108 . . . . . . . . . . . . . . B302-041 . . . . . . . . . . . . . . . B302-043 . . . . . . . . . . . . . . B302-045 . . . . . . . . . . . . . . B502-191 . . . . . . . . . . . . . . . B502-200 . . . . . . . . . . . . . . B502-209 . . . . . . . . . . . . . . B502-292 . . . . . . . . . . . . . . B502-310-604 . . . . . . . . . . B502-380 . . . . . . . . . . . . . . B502-468 . . . . . . . . . . . . . . B502-486 . . . . . . . . . . . . . . B502-815 . . . . . . . . . . . . . . . B502-873 . . . . . . . . . . . . . . B502-899 . . . . . . . . . . . . . . B502-907 . . . . . . . . . . . . . . B502-942 . . . . . . . . . . . . . . B502-943 . . . . . . . . . . . . . . B502-944 . . . . . . . . . . . . . . B502-945 . . . . . . . . . . . . . . B502-946 . . . . . . . . . . . . . . B502-948 . . . . . . . . . . . . . . B502-949 . . . . . . . . . . . . . . B502-998 . . . . . . . . . . . . . . B502-999 . . . . . . . . . . . . . . B520-086 . . . . . . . . . . . . . . B520-087 . . . . . . . . . . . . . . B520-153 . . . . . . . . . . . . . . . 322, 323 342 347 322, 323 322, 323, 327 322, 323, 327 139 83, 109, 130, 139, 266 322, 327 322, 323 139 246 319, 322, 323 137 1 37 320 320 319, 322 342 358 322, 327 322 139 336 358 358 358 358 135 246 246 319 148 319 148 331, 332, 339, 348 342 342 332 342 332 332, 350 347 1 37 246 342 339 332, 350 332 332 332 347 331, 332, 339, 348 322 256 322, 323 138 138 342 Part Number B520-223 . . . . . . . . . . . . . . B520-233 . . . . . . . . . . . . . . B520-235 . . . . . . . . . . . . . . B520-236 . . . . . . . . . . . . . . B520-237 . . . . . . . . . . . . . . . B520-240 . . . . . . . . . . . . . . B520-242 . . . . . . . . . . . . . . B520-243 . . . . . . . . . . . . . . B520-253 . . . . . . . . . . . . . . B520-254 . . . . . . . . . . . . . . B520-256 . . . . . . . . . . . . . . B520-267 . . . . . . . . . . . . . . . B520-268 . . . . . . . . . . . . . . B520-269 . . . . . . . . . . . . . . B520-271 . . . . . . . . . . . . . . . B520-295 . . . . . . . . . . . . . . B520-296 . . . . . . . . . . . . . . B520-298 . . . . . . . . . . . . . . B520-309 . . . . . . . . . . . . . . B520-329 . . . . . . . . . . . . . . B520-360 . . . . . . . . . . . . . . B520-361 . . . . . . . . . . . . . . . B520-366 . . . . . . . . . . . . . . B520-367 . . . . . . . . . . . . . . . B520-375 . . . . . . . . . . . . . . . B520-378 . . . . . . . . . . . . . . B520-407 . . . . . . . . . . . . . . B520-408 . . . . . . . . . . . . . . B520-409 . . . . . . . . . . . . . . B520-483 . . . . . . . . . . . . . . B520-484 . . . . . . . . . . . . . . B520-541 . . . . . . . . . . . . . . . B520-648 . . . . . . . . . . . . . . B520-649 . . . . . . . . . . . . . . B520-650 . . . . . . . . . . . . . . B520-651 . . . . . . . . . . . . . . . B520-652 . . . . . . . . . . . . . . B520-653 . . . . . . . . . . . . . . B520-662 . . . . . . . . . . . . . . B520-663 . . . . . . . . . . . . . . B520-667 . . . . . . . . . . . . . . B520-685 . . . . . . . . . . . . . . B520-690 . . . . . . . . . . . . . . B520-691 . . . . . . . . . . . . . . . B520-692 . . . . . . . . . . . . . . B520-693 . . . . . . . . . . . . . . B520-698 . . . . . . . . . . . . . . B520-721 . . . . . . . . . . . . . . . B520-722 . . . . . . . . . . . . . . . B520-723 . . . . . . . . . . . . . . . B520-724 . . . . . . . . . . . . . . . B520-725 . . . . . . . . . . . . . . . B520-726 . . . . . . . . . . . . . . . B520-727 . . . . . . . . . . . . . . . B520-728 . . . . . . . . . . . . . . B520-729 . . . . . . . . . . . . . . . B520-730 . . . . . . . . . . . . . . B520-731 . . . . . . . . . . . . . . . B520-732 . . . . . . . . . . . . . . . B520-733 . . . . . . . . . . . . . . . B520-734 . . . . . . . . . . . . . . . B520-735 . . . . . . . . . . . . . . . B520-736 . . . . . . . . . . . . . . . B520-737 . . . . . . . . . . . . . . . B520-738 . . . . . . . . . . . . . . . B520-739 . . . . . . . . . . . . . . . B520-740 . . . . . . . . . . . . . . Page Number 3 48 348 321 322, 323 322, 323 321, 327 322, 323 322, 323 348 332, 339 348 138 138 138 1 38 339 348 150, 320, 326 348 348 348 342 348 348 322 334, 336 346 346 346 336 336 3 19, 321, 322 319 1 49 149 3 19 319 319 150 150 319 321 332, 357 332, 357 332, 357 332, 357 334, 339 3 57 357 357 357 357 357 357 347 3 47 348 3 48 348 348 348 348 3 48 348 339 3 39 339 PARTS INDEX A501-769 . . . . . . . . . . . . . . . A501-770 . . . . . . . . . . . . . . . A501-783 . . . . . . . . . . . . . . . A501-791 . . . . . . . . . . . . . . . A501-818 . . . . . . . . . . . . . . . A501-874 . . . . . . . . . . . . . . . A501-878 . . . . . . . . . . . . . . . A501-901 . . . . . . . . . . . . . . . A501-941 . . . . . . . . . . . . . . . A501-945 . . . . . . . . . . . . . . A501-991 . . . . . . . . . . . . . . . A508-399 . . . . . . . . . . . . . . A508-597 . . . . . . . . . . . . . . A508-598 . . . . . . . . . . . . . . A508-600 . . . . . . . . . . . . . A508-605 . . . . . . . . . . . . . . A508-606 . . . . . . . . . . . . . . A508-614 . . . . . . . . . . . . . . A508-640 . . . . . . . . . . . . . . A508-641 . . . . . . . . . . . . . . A508-649 . . . . . . . . . . . . . . A508-650 . . . . . . . . . . . . . . A508-652 . . . . . . . . . . . . . . A508-653 . . . . . . . . . . . . . . Page Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 437 PARTS INDEX INDEX Part Number Page Number Part Number Page Number B520-741 . . . . . . . . . . . . . . . B520-743 . . . . . . . . . . . . . . . B520-744 . . . . . . . . . . . . . . B520-780 . . . . . . . . . . . . . . B520-781 . . . . . . . . . . . . . . . B520-782 . . . . . . . . . . . . . . . B520-783 . . . . . . . . . . . . . . . B520-784 . . . . . . . . . . . . . . B520-785 . . . . . . . . . . . . . . B520-786 . . . . . . . . . . . . . . B520-787 . . . . . . . . . . . . . . . B520-788 . . . . . . . . . . . . . . B520-789 . . . . . . . . . . . . . . B530-254 . . . . . . . . . . . . . . B590-295 . . . . . . . . . . . . . . B590-298 . . . . . . . . . . . . . . B590-299 . . . . . . . . . . . . . . B590-443 . . . . . . . . . . . . . . B600-017 . . . . . . . . . . . . . . B600-018 . . . . . . . . . . . . . . B600-029 . . . . . . . . . . . . . . B600-032 . . . . . . . . . . . . . . B600-040 . . . . . . . . . . . . . B600-041 . . . . . . . . . . . . . . B600-045 . . . . . . . . . . . . . . B600-046 . . . . . . . . . . . . . B600-047 . . . . . . . . . . . . . . B600-048 . . . . . . . . . . . . . B600-053 . . . . . . . . . . . . . . B600-066 . . . . . . . . . . . . . B600-070 . . . . . . . . . . . . . . B600-071 . . . . . . . . . . . . . . B600-078 . . . . . . . . . . . . . . B600-085 . . . . . . . . . . . . . . B600-086 . . . . . . . . . . . . . B600-089 . . . . . . . . . . . . . B600-090 . . . . . . . . . . . . . B600-092 . . . . . . . . . . . . . . B600-100 . . . . . . . . . . . . . . B600-101 . . . . . . . . . . . . . . . B600-106 . . . . . . . . . . . . . . B600-107 . . . . . . . . . . . . . . B600-108 . . . . . . . . . . . . . . B610-014 . . . . . . . . . . . . . . . B610-024 . . . . . . . . . . . . . . B610-025 . . . . . . . . . . . . . . B610-028 . . . . . . . . . . . . . . B610-031 . . . . . . . . . . . . . . . B610-032 . . . . . . . . . . . . . . B610-035 . . . . . . . . . . . . . . B610-040 . . . . . . . . . . . . . . B610-041 . . . . . . . . . . . . . . . B610-042 . . . . . . . . . . . . . . B610-043 . . . . . . . . . . . . . . B610-044 . . . . . . . . . . . . . . B610-045 . . . . . . . . . . . . . . B610-046 . . . . . . . . . . . . . . B610-049 . . . . . . . . . . . . . . B610-050 . . . . . . . . . . . . . . B610-051 . . . . . . . . . . . . . . . B610-053 . . . . . . . . . . . . . . B610-054 . . . . . . . . . . . . . . B610-055 . . . . . . . . . . . . . . B610-056 . . . . . . . . . . . . . . B610-059 . . . . . . . . . . . . . . B610-061 . . . . . . . . . . . . . . . B610-062 . . . . . . . . . . . . . . 339 329, 332 3 29, 332 3 49 3 49 349 3 49 3 49 3 49 3 49 349 3 30 3 30 3 48 3 32 3 57 3 57 3 22 1 61 1 48, 161 3 19, 321, 327 3 21 319 3 19, 321 319 319 150 150 1 50 150 3 26 3 19, 321 1 50 3 19 319 326, 327 326 3 19, 326 1 50 1 50 3 19, 327 3 19, 327, 342 3 19, 327 3 19, 327 3 26 3 26 3 19, 327 3 19, 327 319, 327 1 61 3 19, 327 319, 326, 327 3 26 3 26 3 26 3 26 3 26 1 62 1 62 162 1 62 1 62 1 62 1 62 1 63 1 63 1 63 B610-063 . . . . . . . . . . . . . . B610-064 . . . . . . . . . . . . . . B610-065 . . . . . . . . . . . . . . B610-066 . . . . . . . . . . . . . . B610-071 . . . . . . . . . . . . . . . B610-082 . . . . . . . . . . . . . . B610-083 . . . . . . . . . . . . . . B610-084 . . . . . . . . . . . . . . B610-085 . . . . . . . . . . . . . . B610-086 . . . . . . . . . . . . . . B610-203 . . . . . . . . . . . . . . . B610-204 . . . . . . . . . . . . . . B610-205 . . . . . . . . . . . . . . . B610-281 . . . . . . . . . . . . . . . 1 63 1 63 1 63 1 62, 163 3 26 3 24, 325, 326 3 24, 325, 326 3 24, 325, 326 3 24, 325, 326 3 24, 325, 326 3 19, 327 3 19, 327 3 19, 327 3 19, 327 C C100-059 . . . . . . . . . . . . . . C100-062 . . . . . . . . . . . . . . C102-522 . . . . . . . . . . . . . . . C102-524 . . . . . . . . . . . . . . . C102-540 . . . . . . . . . . . . . . . C102-541 . . . . . . . . . . . . . . . C102-542 . . . . . . . . . . . . . . . C102-570 . . . . . . . . . . . . . . . C102-572 . . . . . . . . . . . . . . . C102-837 . . . . . . . . . . . . . . . C102-840 . . . . . . . . . . . . . . . C203-034 . . . . . . . . . . . . . . C203-311 . . . . . . . . . . . . . . . . C203-312 . . . . . . . . . . . . . . . C203-376 . . . . . . . . . . . . . . . C203-390 . . . . . . . . . . . . . . C203-391 . . . . . . . . . . . . . . . C203-411 . . . . . . . . . . . . . . . C203-726 . . . . . . . . . . . . . . . C203-733 . . . . . . . . . . . . . . . C203-736 . . . . . . . . . . . . . . . C203-858 . . . . . . . . . . . . . . C203-947 . . . . . . . . . . . . . . C203-948 . . . . . . . . . . . . . . C303-006 . . . . . . . . . . . . . . C303-007 . . . . . . . . . . . . . . C303-028 . . . . . . . . . . . . . . C303-029 . . . . . . . . . . . . . . C303-400 . . . . . . . . . . . . . . C303-421 . . . . . . . . . . . . . . . C303-437 . . . . . . . . . . . . . . . C303-438 . . . . . . . . . . . . . . C303-439 . . . . . . . . . . . . . . C503-008 . . . . . . . . . . . . . . C503-019 . . . . . . . . . . . . . . . C503-113 . . . . . . . . . . . . . . . . C503-115 . . . . . . . . . . . . . . . C503-116 . . . . . . . . . . . . . . . C503-118 . . . . . . . . . . . . . . . C503-308 . . . . . . . . . . . . . . C503-314 . . . . . . . . . . . . . . . C503-324 . . . . . . . . . . . . . . . C503-331 . . . . . . . . . . . . . . . C503-334 . . . . . . . . . . . . . . C503-335 . . . . . . . . . . . . . . . C503-339 . . . . . . . . . . . . . . C503-346 . . . . . . . . . . . . . . C503-359 . . . . . . . . . . . . . . C503-360 . . . . . . . . . . . . . . 1 08 1 08 1 07 1 07 1 08 1 07 1 07 1 07 1 07 1 08 1 08 1 08 6 9, 83, 109, 130, 139, 163, 256, 275 6 9, 83, 109, 130, 139, 163, 275 1 08 1 08 1 08 1 08 3 50, 358 1 08 8 3, 109, 130, 210 1 08 1 08 1 08 1 08 1 09 1 09 8 3 1 08 8 3 3 45, 346 8 3 1 08 6 8, 108 1 08, 128 3 52 3 43, 352 3 52 3 43, 352 8 2, 108 1 08 1 08 1 28 108 1 08 1 08 3 50 1 08 1 08 Price Book 8 438 Effective April 4, 2020 • Rev. 04/20 Part Number C503-361 . . . . . . . . . . . . . . . C503-362 . . . . . . . . . . . . . . C503-368 . . . . . . . . . . . . . . C503-371 . . . . . . . . . . . . . . . C503-400 . . . . . . . . . . . . . . C503-403 . . . . . . . . . . . . . . C503-524 . . . . . . . . . . . . . . C503-767 . . . . . . . . . . . . . . . C503-768 . . . . . . . . . . . . . . C503-775 . . . . . . . . . . . . . . . C503-940 . . . . . . . . . . . . . . C503-965 . . . . . . . . . . . . . . C504-114 . . . . . . . . . . . . . . . C504-116 . . . . . . . . . . . . . . . C603-098 . . . . . . . . . . . . . . C603-195 . . . . . . . . . . . . . . . C603-256 . . . . . . . . . . . . . . C603-262 . . . . . . . . . . . . . . C603-500 . . . . . . . . . . . . . . C603-524 . . . . . . . . . . . . . . C603-569 . . . . . . . . . . . . . . C603-623 . . . . . . . . . . . . . . C603-827 . . . . . . . . . . . . . . C603-897 . . . . . . . . . . . . . . C603-936 . . . . . . . . . . . . . . C603-950 . . . . . . . . . . . . . . C603-951 . . . . . . . . . . . . . . . C603-952 . . . . . . . . . . . . . . C603-956 . . . . . . . . . . . . . . C603-964 . . . . . . . . . . . . . . C603-967 . . . . . . . . . . . . . . C604-050 . . . . . . . . . . . . . . C604-051 . . . . . . . . . . . . . . C604-052 . . . . . . . . . . . . . . C604-053 . . . . . . . . . . . . . . C604-088 . . . . . . . . . . . . . . C604-089 . . . . . . . . . . . . . . C604-106 . . . . . . . . . . . . . . C604-107 . . . . . . . . . . . . . . . C604-144 . . . . . . . . . . . . . . . C604-187 . . . . . . . . . . . . . . . C604-188 . . . . . . . . . . . . . . C604-191 . . . . . . . . . . . . . . . C604-204 . . . . . . . . . . . . . . C604-205 . . . . . . . . . . . . . . C604-226 . . . . . . . . . . . . . . C604-234 . . . . . . . . . . . . . . C604-243 . . . . . . . . . . . . . . C604-268 . . . . . . . . . . . . . . C604-269 . . . . . . . . . . . . . . C604-271 . . . . . . . . . . . . . . . C604-273 . . . . . . . . . . . . . . . C604-307 . . . . . . . . . . . . . . C604-312 . . . . . . . . . . . . . . . C604-333 . . . . . . . . . . . . . . C604-334 . . . . . . . . . . . . . . C604-348 . . . . . . . . . . . . . . C604-354 . . . . . . . . . . . . . . C604-362 . . . . . . . . . . . . . . C604-368 . . . . . . . . . . . . . . C604-369 . . . . . . . . . . . . . . C604-371 . . . . . . . . . . . . . . . C604-372 . . . . . . . . . . . . . . . C604-381 . . . . . . . . . . . . . . . C604-395 . . . . . . . . . . . . . . Page Number 108 108 108 108 108 106 316 310, 312, 313, 316 108 106 106 108 353 353 326 316 69, 83, 109, 138, 162, 275 106 108 312, 316 106 137, 265 343, 352 69, 83, 109, 138, 150, 162, 256, 275 353 352 352 352 343 343 343 350 350 350 350 350 350 312, 316 316 3 16 108, 128 108, 128 108, 128 108 108 350 350 311, 313, 316, 340, 345, 346 350 350 350 82, 108 65 108 106 334 313, 316 82 316 316 316 316 316 79 83 INDEX Part Number 82 79 350 346 317, 414 414 414 414 414 315, 317, 414 317, 414 317, 414 410 410 410 410 410 410 410 410 410 410 414 414 414 414 414 412 412 414 412 414 412 412 414 414 412 411 411 412 414 411 411 411 411 411 411 411 411 414 414 414 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 130, 212, 236 Part Number Page Number CON-192P . . . . . . . . . . . . . . 130, 212, 236 CON-KIT . . . . . . . . . . . . . . . . 130, 212, 236 CS210-B500 . . . . . . . . . . . . 243 D D500-000 . . . . . . . . . . . . . 79, 126 E E205-204 . . . . . . . . . . . . . . 322, 323 F F206-493 . . . . . . . . . . . . . . F206-494 . . . . . . . . . . . . . . F206-496 . . . . . . . . . . . . . . F506-237 . . . . . . . . . . . . . . . F506-278 . . . . . . . . . . . . . . F506-359 . . . . . . . . . . . . . . F506-455 . . . . . . . . . . . . . . F506-864 . . . . . . . . . . . . . . F506-867 . . . . . . . . . . . . . . F506-878 . . . . . . . . . . . . . . F605-038 . . . . . . . . . . . . . . 2 46 246 246 275 275 150 266 246 246, 256 246 317 G G506-815 . . . . . . . . . . . . . . 67, 81, 107, 256, 275 H HANDLE.10155 . . . . . . . . . . HANDLE.10156 . . . . . . . . . . HANDLE.10157 . . . . . . . . . . HANDLE.10158 . . . . . . . . . . HANDLE.10159 . . . . . . . . . . HANDLE.10160 . . . . . . . . . HANDLE.10161 . . . . . . . . . . HANDLE.10162 . . . . . . . . . . HANDLE.10168 . . . . . . . . . HANDLE.10170 . . . . . . . . . . HANDLE.10176 . . . . . . . . . . HANDLE.10178 . . . . . . . . . . HANDLE.10179 . . . . . . . . . . HANDLE.10180 . . . . . . . . . HANDLE.10181 . . . . . . . . . . HANDLE.10182 . . . . . . . . . . HANDLE.10183 . . . . . . . . . . HANDLE.10184 . . . . . . . . . HANDLE.10185 . . . . . . . . . . HANDLE.10186 . . . . . . . . . HANDLE.10192 . . . . . . . . . . HANDLE.10194 . . . . . . . . . HANDLE.10200 . . . . . . . . . HANDLE.10202 . . . . . . . . . HANDLE.10211 . . . . . . . . . . HANDLE.10212 . . . . . . . . . . HANDLE.10213 . . . . . . . . . . HANDLE.10215 . . . . . . . . . . HANDLE.10217 . . . . . . . . . . HANDLE.10218 . . . . . . . . . . HANDLE.10219 . . . . . . . . . . HANDLE.10220 . . . . . . . . . HANDLE.10221 . . . . . . . . . . HANDLE.10222 . . . . . . . . . HANDLE.10225 . . . . . . . . . HANDLE.10226 . . . . . . . . . HANDLE.10230 . . . . . . . . . 285 285 285 285 285 285 285 285 285 285 285 285 285 285 285 285 285 285 285 2 85 285 285 285 2 85 2 86 2 86 2 86 2 85 2 86 2 86 2 86 286 287 287 2 85 2 87 2 87 Part Number HANDLE.10231 . . . . . . . . . . HANDLE.10236 . . . . . . . . . HANDLE.10238 . . . . . . . . . HANDLE.10243 . . . . . . . . . HANDLE.10248 . . . . . . . . . HANDLE.10254 . . . . . . . . . HANDLE.10261 . . . . . . . . . . HANDLE.10262 . . . . . . . . . HANDLE.10271 . . . . . . . . . . HANDLE.10272 . . . . . . . . . HANDLE.10273 . . . . . . . . . HANDLE.10275 . . . . . . . . . HANDLE.10277 . . . . . . . . . . HANDLE.10278 . . . . . . . . . HANDLE.10279 . . . . . . . . . HANDLE.10280 . . . . . . . . . HANDLE.10281 . . . . . . . . . . HANDLE.10282 . . . . . . . . . HANDLE.10285 . . . . . . . . . HANDLE.10286 . . . . . . . . . HANDLE.10290 . . . . . . . . . HANDLE.10291 . . . . . . . . . . HANDLE.10296 . . . . . . . . . HANDLE.10297 . . . . . . . . . HANDLE.10298 . . . . . . . . . HANDLE.10306 . . . . . . . . . HANDLE.10308 . . . . . . . . . HANDLE.10317 . . . . . . . . . . HANDLE.10318 . . . . . . . . . . HANDLE.10325 . . . . . . . . . HANDLE.10326 . . . . . . . . . HANDLE.10604 . . . . . . . . . HANDLE.10606 . . . . . . . . . HL6-2 . . . . . . . . . . . . . . . . . . HL6-3 . . . . . . . . . . . . . . . . . . HL6-5 . . . . . . . . . . . . . . . . . . HL6-7 . . . . . . . . . . . . . . . . . . HL6-9000RK . . . . . . . . . . . HL6-9010 . . . . . . . . . . . . . . HL6-9040 . . . . . . . . . . . . . . HL6-9050 . . . . . . . . . . . . . . HL6-9060 . . . . . . . . . . . . . . HL6-9070 . . . . . . . . . . . . . . HL6-9080 . . . . . . . . . . . . . . HL6-9082 . . . . . . . . . . . . . . HL6-9092EL/EU . . . . . . . HL6-9095EL/EU . . . . . . . HL6-9453 . . . . . . . . . . . . . . HL6-9456 . . . . . . . . . . . . . . HL6-9465 . . . . . . . . . . . . . . HL6-9466 . . . . . . . . . . . . . . HL6-9473 . . . . . . . . . . . . . . HL6-9485 . . . . . . . . . . . . . . HL6-9486 . . . . . . . . . . . . . . HLPART.10060 . . . . . . . . . HLPART.10061 . . . . . . . . . . HLPART.10062 . . . . . . . . . HLPART.10063 . . . . . . . . . HLPART.10064 . . . . . . . . . HLPART.10065 . . . . . . . . . HLPART.10066 . . . . . . . . . HLPART.10067 . . . . . . . . . . HLPART.10068 . . . . . . . . . HLPART.10069 . . . . . . . . . HLPART.10070 . . . . . . . . . . HLPART.10071 . . . . . . . . . . HLPART.10072 . . . . . . . . . . HLPART.10073 . . . . . . . . . . Page Number 287 287 2 86 2 87 2 85 2 86 2 86 2 86 286 286 286 285 286 286 286 2 86 287 287 287 287 2 87 287 2 86 2 86 287 285 285 286 286 287 287 285 285 282 282 282 282 283 2 83 283 2 83 2 83 283 283 283 283 2 83 2 83 283 283 283 2 83 2 83 283 2 88 2 88 288 288 288 288 2 88 288 2 88 2 88 2 88 2 88 2 88 2 88 PARTS INDEX C604-400 . . . . . . . . . . . . . . C604-402 . . . . . . . . . . . . . . C604-419 . . . . . . . . . . . . . . C607-062 . . . . . . . . . . . . . . CL10-301 . . . . . . . . . . . . . . . CL10-350 . . . . . . . . . . . . . . . CL10-352 . . . . . . . . . . . . . . . CL10-354 . . . . . . . . . . . . . . . CL10-355 . . . . . . . . . . . . . . . CL10-360 . . . . . . . . . . . . . . . CL10-361 . . . . . . . . . . . . . . . CL10-362 . . . . . . . . . . . . . . . CL100PB . . . . . . . . . . . . . . . CL154PB . . . . . . . . . . . . . . . . CL154PB-XP . . . . . . . . . . . . CL174PB . . . . . . . . . . . . . . . . CL174PB-XP . . . . . . . . . . . . CL200PB . . . . . . . . . . . . . . . CL254PB . . . . . . . . . . . . . . . CL254PB-XP . . . . . . . . . . . CL274PB . . . . . . . . . . . . . . . CL274PB-XP . . . . . . . . . . . . CL720-3-1 . . . . . . . . . . . . . . CL720-3-2 . . . . . . . . . . . . . . CL720-3-3 . . . . . . . . . . . . . . CL720-3-4 . . . . . . . . . . . . . . CL720-3-5 . . . . . . . . . . . . . . CL720G . . . . . . . . . . . . . . . . . CL721G . . . . . . . . . . . . . . . . . CL725-1 . . . . . . . . . . . . . . . . . CL725G . . . . . . . . . . . . . . . . . CL725-SP . . . . . . . . . . . . . . . CL728G . . . . . . . . . . . . . . . . . CL729G . . . . . . . . . . . . . . . . . CL729S-2 . . . . . . . . . . . . . . . CL729S-3 . . . . . . . . . . . . . . . CL771G . . . . . . . . . . . . . . . . . CL774R . . . . . . . . . . . . . . . . . CL774R-XP . . . . . . . . . . . . . CL775G . . . . . . . . . . . . . . . . . CL775-SP . . . . . . . . . . . . . . . CL777R . . . . . . . . . . . . . . . . . CL874R . . . . . . . . . . . . . . . . . CL874R-XP . . . . . . . . . . . . . CL888R . . . . . . . . . . . . . . . . CL920R . . . . . . . . . . . . . . . . CL929R . . . . . . . . . . . . . . . . CL974R . . . . . . . . . . . . . . . . . CL974R-XP . . . . . . . . . . . . . CL7788-PA-D . . . . . . . . . . . CL-ETS1 . . . . . . . . . . . . . . . . CLTR78 . . . . . . . . . . . . . . . . . CON-6 . . . . . . . . . . . . . . . . . . CON-6P . . . . . . . . . . . . . . . . CON-6W . . . . . . . . . . . . . . . CON-12 . . . . . . . . . . . . . . . . . CON-12P . . . . . . . . . . . . . . . . CON-26 . . . . . . . . . . . . . . . . . CON-26P . . . . . . . . . . . . . . . CON-32 . . . . . . . . . . . . . . . . . CON-32P . . . . . . . . . . . . . . . CON-38 . . . . . . . . . . . . . . . . . CON-38P . . . . . . . . . . . . . . . CON-44 . . . . . . . . . . . . . . . . CON-44P . . . . . . . . . . . . . . . CON-50 . . . . . . . . . . . . . . . . CON-50P . . . . . . . . . . . . . . . CON-192 . . . . . . . . . . . . . . . . Page Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 439 PARTS INDEX INDEX Part Number Page Number Part Number Page Number HLPART.10074 . . . . . . . . . . HLPART.10075 . . . . . . . . . . HLPART.10076 . . . . . . . . . . HLPART.10077 . . . . . . . . . . HLPART.10078 . . . . . . . . . . HLPART.10079 . . . . . . . . . . HLPART.10080 . . . . . . . . . HLPART.10081 . . . . . . . . . . HLPART.10082 . . . . . . . . . HLPART.10083 . . . . . . . . . HLPART.10153 . . . . . . . . . . HLPART.10154 . . . . . . . . . . HLPART.10155 . . . . . . . . . . HLPART.10156 . . . . . . . . . . HLPART.10158 . . . . . . . . . . HLPART.10159 . . . . . . . . . . 288 288 288 2 88 288 2 88 2 88 2 88 288 288 2 88 2 88 288 2 88 288 288 KS43F2200 . . . . . . . . . . . . KS43F2300 . . . . . . . . . . . . KS43F3200 . . . . . . . . . . . . KS72F2300 . . . . . . . . . . . . . KZ11D20 . . . . . . . . . . . . . . . . KZ11F40 . . . . . . . . . . . . . . . . KZ11G20 . . . . . . . . . . . . . . . . KZ11G40 . . . . . . . . . . . . . . . . KZ12D20 . . . . . . . . . . . . . . . KZ12D40 . . . . . . . . . . . . . . . KZ12G20 . . . . . . . . . . . . . . . KZ12G40 . . . . . . . . . . . . . . . KZ13D20 . . . . . . . . . . . . . . . KZ13D40 . . . . . . . . . . . . . . . KZ13F20 . . . . . . . . . . . . . . . . KZ13F40 . . . . . . . . . . . . . . . . KZ32BB0 . . . . . . . . . . . . . . . KZ32DA0 . . . . . . . . . . . . . . . KZ33DC0 . . . . . . . . . . . . . . . KZ34CA0 . . . . . . . . . . . . . . . KZ34DA0 . . . . . . . . . . . . . . . KZ34ED0 . . . . . . . . . . . . . . . KZ38BA1 . . . . . . . . . . . . . . . KZ38BA2 . . . . . . . . . . . . . . . KZ390AL . . . . . . . . . . . . . . . 2 93 2 92 2 95 2 92 2 97 2 97 297 2 97 297 297 297 297 297 297 297 2 97 317 3 15, 317 3 17 317 315, 317 3 17 317 3 17 421 J J250-028 . . . . . . . . . . . . . . 150 K K110-020 . . . . . . . . . . . . . . . K110-020 xx . . . . . . . . . . . . K110-480 316 . . . . . . . . . . . K110-480 605 . . . . . . . . . . K110-480 606 . . . . . . . . . . K110-480 609 . . . . . . . . . . K110-480 612 . . . . . . . . . . . K110-480 613 . . . . . . . . . . . K110-480 619 . . . . . . . . . . . K110-480 625 . . . . . . . . . . K110-480 626 . . . . . . . . . . K110-480 629 . . . . . . . . . . K110-480 630 . . . . . . . . . . K110-550 . . . . . . . . . . . . . . . K110-947 . . . . . . . . . . . . . . . K510-045 . . . . . . . . . . . . . . K510-053 . . . . . . . . . . . . . . . K510-066 . . . . . . . . . . . . . . K510-320 . . . . . . . . . . . . . . . K510-330 . . . . . . . . . . . . . . . K510-389 . . . . . . . . . . . . . . . K510-390 . . . . . . . . . . . . . . K510-434 . . . . . . . . . . . . . . . K510-474 . . . . . . . . . . . . . . . K510-680 . . . . . . . . . . . . . . K510-711 . . . . . . . . . . . . . . . . K510-730 . . . . . . . . . . . . . . . K510-842 . . . . . . . . . . . . . . . KC215A130 . . . . . . . . . . . . . KC215B130 . . . . . . . . . . . . . . KS11D1200 . . . . . . . . . . . . . . KS11F1200 . . . . . . . . . . . . . . KS21D1200 . . . . . . . . . . . . . KS21F1200 . . . . . . . . . . . . . KS23D2200 . . . . . . . . . . . . KS23D2300 . . . . . . . . . . . . KS23F2200 . . . . . . . . . . . . . KS23F2300 . . . . . . . . . . . . . KS41D1200 . . . . . . . . . . . . . KS41F1200 . . . . . . . . . . . . . KS43D2200 . . . . . . . . . . . . KS43D2300 . . . . . . . . . . . . KS43D3200 . . . . . . . . . . . . 2 10 2 30 357 3 57 357 3 57 357 357 3 57 3 57 3 57 357 3 57 2 07 2 10 352 201 66, 80, 107, 126, 137, 160, 201, 265, 274 207 2 02, 231 204, 232 204, 232 352 334 333, 334, 335, 336, 339 3 34, 336 3 33, 334, 335, 336, 339, 348 207 294 294 294 294 294 294 2 93 2 92 293 292 294 294 2 93 2 92 2 95 L L0170 . . . . . . . . . . . . . . . . . . L0172 . . . . . . . . . . . . . . . . . . . L283-003 . . . . . . . . . . . . . . L283-004 . . . . . . . . . . . . . . L283-006 . . . . . . . . . . . . . . L283-008 . . . . . . . . . . . . . . L283-010 . . . . . . . . . . . . . . . L283-029 . . . . . . . . . . . . . . L283-030 . . . . . . . . . . . . . . L283-031 . . . . . . . . . . . . . . . L283-039 . . . . . . . . . . . . . . L283-040 . . . . . . . . . . . . . . L283-049 . . . . . . . . . . . . . . L283-055 . . . . . . . . . . . . . . L283-056 19 . . . . . . . . . . . . L283-056 23 . . . . . . . . . . . L283-056 25 . . . . . . . . . . . L283-056 31 . . . . . . . . . . . . L283-056 37 . . . . . . . . . . . L283-056 43 . . . . . . . . . . . L283-056 48 . . . . . . . . . . . L283-060 . . . . . . . . . . . . . . L283-061 . . . . . . . . . . . . . . . L283-062 . . . . . . . . . . . . . . L283-064 . . . . . . . . . . . . . . L283-065 . . . . . . . . . . . . . . L283-075 . . . . . . . . . . . . . . . L283-099 . . . . . . . . . . . . . . L283-100 . . . . . . . . . . . . . . . L283-101 . . . . . . . . . . . . . . . L283-112 . . . . . . . . . . . . . . . . L283-121 . . . . . . . . . . . . . . . . L283-122 . . . . . . . . . . . . . . . L283-123 . . . . . . . . . . . . . . . L283-124 19 . . . . . . . . . . . . . L283-124 23 . . . . . . . . . . . . L283-124 25 . . . . . . . . . . . . L283-124 31 . . . . . . . . . . . . . L283-124 37 . . . . . . . . . . . . L283-124 43 . . . . . . . . . . . . 1 77, 179, 181, 183 1 77, 179, 181, 183 2 07 2 07 2 07 2 07 2 07 2 07 2 07, 234 2 07, 234, 266 2 05 2 07, 234 2 07 2 07, 234 2 02, 231 2 02, 231 2 02, 231 2 02, 231 202, 231 2 02, 231 2 02, 231 2 04, 232 2 04, 232 2 05 2 04, 232 2 04, 232 2 07 2 05 2 10 210 2 07 2 10 2 10 2 10 2 02, 231 2 02, 231 2 02, 231 2 02, 231 2 02, 231 2 02, 231 Price Book 8 440 Effective April 4, 2020 • Rev. 04/20 Part Number L283-124 48 . . . . . . . . . . . . L283-126 . . . . . . . . . . . . . . . L283-127 . . . . . . . . . . . . . . . L283-128 . . . . . . . . . . . . . . . L283-131 . . . . . . . . . . . . . . . . L283-132 . . . . . . . . . . . . . . . L283-133 . . . . . . . . . . . . . . . L283-134 . . . . . . . . . . . . . . . L283-137 . . . . . . . . . . . . . . . L283-138 . . . . . . . . . . . . . . . L283-139 . . . . . . . . . . . . . . . L283-140 . . . . . . . . . . . . . . . L283-141 . . . . . . . . . . . . . . . . L283-144 . . . . . . . . . . . . . . . L283-145 . . . . . . . . . . . . . . . L283-146 . . . . . . . . . . . . . . . L283-150 . . . . . . . . . . . . . . . L283-154 xx . . . . . . . . . . . . L283-171 . . . . . . . . . . . . . . . . L283-172 . . . . . . . . . . . . . . . L283-173 . . . . . . . . . . . . . . . L283-176 . . . . . . . . . . . . . . . L283-177 . . . . . . . . . . . . . . . . L283-178 . . . . . . . . . . . . . . . L283-180 . . . . . . . . . . . . . . . L283-181 . . . . . . . . . . . . . . . . L283-182 . . . . . . . . . . . . . . . L283-198 . . . . . . . . . . . . . . . L283-199 . . . . . . . . . . . . . . . L283-310 . . . . . . . . . . . . . . . L283-311 . . . . . . . . . . . . . . . . L283-314 . . . . . . . . . . . . . . . L283-316 . . . . . . . . . . . . . . . L283-317 . . . . . . . . . . . . . . . L283-340 . . . . . . . . . . . . . . L283-341 . . . . . . . . . . . . . . . L283-347 . . . . . . . . . . . . . . . L283-378 . . . . . . . . . . . . . . . L283-392 . . . . . . . . . . . . . . . L283-393 . . . . . . . . . . . . . . . L283-394 . . . . . . . . . . . . . . . L283-395 . . . . . . . . . . . . . . . L283-396 . . . . . . . . . . . . . . L283-397 . . . . . . . . . . . . . . . L283-398 . . . . . . . . . . . . . . L283-412 . . . . . . . . . . . . . . . L283-413 . . . . . . . . . . . . . . . L283-414 . . . . . . . . . . . . . . . L283-415 . . . . . . . . . . . . . . . L283-416 . . . . . . . . . . . . . . . L283-417 . . . . . . . . . . . . . . . L283-418 . . . . . . . . . . . . . . . L283-419 . . . . . . . . . . . . . . . L283-420 . . . . . . . . . . . . . . L283-421 . . . . . . . . . . . . . . . L283-422 . . . . . . . . . . . . . . . L283-423 . . . . . . . . . . . . . . . L283-424 . . . . . . . . . . . . . . . L283-425 . . . . . . . . . . . . . . . L283-426 . . . . . . . . . . . . . . L283-427 . . . . . . . . . . . . . . . L283-428 . . . . . . . . . . . . . . L283-429 . . . . . . . . . . . . . . L283-430 . . . . . . . . . . . . . . L283-431 . . . . . . . . . . . . . . . L283-432 . . . . . . . . . . . . . . . L283-433 . . . . . . . . . . . . . . . Page Number 202, 231 205 207 207 205 205 205 205 205 205 205 205 205 205 205 205 207, 234 210 2 05 205 205 205 205 205 205 205 205 204, 232 204, 232 205 205 205 205 205 266 266 206 266 206 206 206 206 206 206 206 198 203 203 203 203 203 203 203 203 203 203 203 2 03 203 203 203 203 203 203 203 203 203 INDEX Part Number 203 203 203 203 203 203 203 203 203 203 203 203 203 203 198 207 206 206 206 206 206 206 206 206 206 206 206 206 206 206 206 206 205 210 207 203 205 187 187 187 187 187 187 207 207, 234 234 207, 234 207, 234 207, 234 207, 234 207, 234 207, 234 207 207 207 207, 234 207 207 207 207 207 207 207, 234 207 207, 234 207 207, 234 Part Number Page Number L583-051 . . . . . . . . . . . . . . . L583-053 . . . . . . . . . . . . . . L583-056 . . . . . . . . . . . . . . L583-057 . . . . . . . . . . . . . . . L583-058 . . . . . . . . . . . . . . L583-063 . . . . . . . . . . . . . . L583-064 . . . . . . . . . . . . . . L583-065 . . . . . . . . . . . . . . L583-066 . . . . . . . . . . . . . . L583-119 . . . . . . . . . . . . . . . . L583-120 . . . . . . . . . . . . . . . L583-121 . . . . . . . . . . . . . . . . L583-122 . . . . . . . . . . . . . . . L583-123 . . . . . . . . . . . . . . . L583-133 . . . . . . . . . . . . . . . L583-153 . . . . . . . . . . . . . . . L583-156 . . . . . . . . . . . . . . . L583-174 . . . . . . . . . . . . . . . L583-187 . . . . . . . . . . . . . . . L583-192 . . . . . . . . . . . . . . . L583-195 . . . . . . . . . . . . . . . L583-196 . . . . . . . . . . . . . . . L583-197 . . . . . . . . . . . . . . . L583-198 . . . . . . . . . . . . . . . L583-200 . . . . . . . . . . . . . . L583-211 . . . . . . . . . . . . . . . . L583-212 . . . . . . . . . . . . . . . L583-213 . . . . . . . . . . . . . . . L583-214 . . . . . . . . . . . . . . . L583-215 . . . . . . . . . . . . . . . L583-216 . . . . . . . . . . . . . . . L583-217 . . . . . . . . . . . . . . . L583-218 . . . . . . . . . . . . . . . L583-219 . . . . . . . . . . . . . . . L583-233 . . . . . . . . . . . . . . . L583-233-458 . . . . . . . . . . L583-245 . . . . . . . . . . . . . . . L583-254 . . . . . . . . . . . . . . . L583-255 . . . . . . . . . . . . . . . L583-286 . . . . . . . . . . . . . . L583-287 . . . . . . . . . . . . . . . L583-290 . . . . . . . . . . . . . . L583-291 . . . . . . . . . . . . . . . L583-321 . . . . . . . . . . . . . . . L583-322 . . . . . . . . . . . . . . . L583-363 . . . . . . . . . . . . . . . L583-375 . . . . . . . . . . . . . . . L583-426 . . . . . . . . . . . . . . L583-427 . . . . . . . . . . . . . . . L583-446 . . . . . . . . . . . . . . L583-447 . . . . . . . . . . . . . . . L583-454 . . . . . . . . . . . . . . L583-468 . . . . . . . . . . . . . . L583-474 . . . . . . . . . . . . . . . L583-475 . . . . . . . . . . . . . . . L583-476 . . . . . . . . . . . . . . . L583-477 . . . . . . . . . . . . . . . L583-481 . . . . . . . . . . . . . . . L583-485 . . . . . . . . . . . . . . L583-490 . . . . . . . . . . . . . . L583-492 . . . . . . . . . . . . . . L583-494 . . . . . . . . . . . . . . L583-496 . . . . . . . . . . . . . . L583-497 . . . . . . . . . . . . . . . L583-498 . . . . . . . . . . . . . . L583-499 . . . . . . . . . . . . . . L583-500 . . . . . . . . . . . . . . 207 207 207 207 207 207 207 208 208, 234 204, 232 204, 232 204, 232 204, 232 204, 232 83, 204, 232 331, 332, 339 208 208 199, 229 208 338 208 332 332 334 204, 232 204, 232 204, 232 204, 232 204, 232 204, 232 204, 232 204, 232 204, 232 202, 231 375 204 331, 332, 339 333, 334, 335, 336, 339 208 204, 232 208 208 208 208 202, 203, 231 204 208 208 329, 332 329, 332 208, 234 208 328, 332, 339 328, 332, 339 328, 332, 339, 350 328, 332, 339 208 208, 234 208, 234 208 208 208 204, 232 204, 232 204, 232 204, 232 Part Number L583-501 . . . . . . . . . . . . . . . L583-502 . . . . . . . . . . . . . . L583-503 . . . . . . . . . . . . . . L583-504 . . . . . . . . . . . . . . L583-579 . . . . . . . . . . . . . . . L583-584 . . . . . . . . . . . . . . L583-585 . . . . . . . . . . . . . . L583-638 . . . . . . . . . . . . . . L583-639 . . . . . . . . . . . . . . L583-682 . . . . . . . . . . . . . . L583-684 . . . . . . . . . . . . . . L583-685 . . . . . . . . . . . . . . L583-705 . . . . . . . . . . . . . . . L583-708 . . . . . . . . . . . . . . . L583-709 . . . . . . . . . . . . . . . L583-710 . . . . . . . . . . . . . . . L583-711 . . . . . . . . . . . . . . . . L583-712 . . . . . . . . . . . . . . . L583-717 . . . . . . . . . . . . . . . . L583-739 . . . . . . . . . . . . . . . L583-748 . . . . . . . . . . . . . . . L583-752 . . . . . . . . . . . . . . . L583-760 . . . . . . . . . . . . . . . L583-761 . . . . . . . . . . . . . . . L583-773 . . . . . . . . . . . . . . . L583-774 . . . . . . . . . . . . . . . L583-800 . . . . . . . . . . . . . . L583-801 . . . . . . . . . . . . . . . L583-802 . . . . . . . . . . . . . . L583-803 . . . . . . . . . . . . . . L9010 . . . . . . . . . . . . . . . . . . L9010B . . . . . . . . . . . . . . . . . L9025 . . . . . . . . . . . . . . . . . . L9026P . . . . . . . . . . . . . . . . L9040 . . . . . . . . . . . . . . . . . . L9040B . . . . . . . . . . . . . . . . L9044 . . . . . . . . . . . . . . . . . . L9050LB . . . . . . . . . . . . . . . L9050P . . . . . . . . . . . . . . . . L9056LB . . . . . . . . . . . . . . . L9056P . . . . . . . . . . . . . . . . L9060P . . . . . . . . . . . . . . . . L9070LB . . . . . . . . . . . . . . . L9070P . . . . . . . . . . . . . . . . L9071P . . . . . . . . . . . . . . . . . L9076P . . . . . . . . . . . . . . . . L9077P . . . . . . . . . . . . . . . . . L9080LB . . . . . . . . . . . . . . . L9080P . . . . . . . . . . . . . . . . L9082LB . . . . . . . . . . . . . . . L9082P . . . . . . . . . . . . . . . . L9090 . . . . . . . . . . . . . . . . . L9090&91 EL & EU . . . . . L9090LB . . . . . . . . . . . . . . . L9091LB . . . . . . . . . . . . . . . . L9092P . . . . . . . . . . . . . . . . L9092P&93P EU & EL . . L9094P . . . . . . . . . . . . . . . . L9094P&95P EU & EL . . L9175 . . . . . . . . . . . . . . . . . . . L9176 . . . . . . . . . . . . . . . . . . . L9440 . . . . . . . . . . . . . . . . . . L9444 . . . . . . . . . . . . . . . . . . L9453LB . . . . . . . . . . . . . . . L9453P . . . . . . . . . . . . . . . . . L9456LB . . . . . . . . . . . . . . . L9456P . . . . . . . . . . . . . . . . Page Number 204, 232 204, 232 204, 232 204, 232 203 266 210 339 339 266 266 266 203 266 2 03 2 03 2 03 2 03 2 03 2 03 2 07 203 2 08 2 08 3 30 3 30 328 3 28 328, 349 328, 349 177, 179, 181, 183, 185 195 177, 179, 181, 183 177, 179, 181, 183 177, 179, 181, 183, 185 195 177, 181, 185 1 95 177, 179, 181, 183, 185 1 95 177, 179, 181, 183, 185 177, 179, 181, 183, 185 1 95 177, 179, 181, 183, 185 1 77, 179, 181, 183, 185 177, 179, 181, 183, 185 1 77, 179, 181, 183, 185 195 177, 179, 181, 183, 185 1 95 177, 179, 181, 183, 185 177, 179, 181, 183 185 195 195 177, 179, 181, 183 185 177, 179, 181, 183 185 177, 179, 181, 183 1 77, 179, 181, 183 177, 179, 181, 183, 185 1 77, 181 195 177, 179, 181, 183, 185 195 177, 179, 181, 183, 185 PARTS INDEX L283-434 . . . . . . . . . . . . . . . L283-435 . . . . . . . . . . . . . . . L283-436 . . . . . . . . . . . . . . L283-438 . . . . . . . . . . . . . . L283-439 . . . . . . . . . . . . . . L283-440 . . . . . . . . . . . . . . L283-441 . . . . . . . . . . . . . . . L283-442 . . . . . . . . . . . . . . L283-443 . . . . . . . . . . . . . . . L283-444 . . . . . . . . . . . . . . L283-445 . . . . . . . . . . . . . . L283-446 . . . . . . . . . . . . . . L283-447 . . . . . . . . . . . . . . . L283-448 . . . . . . . . . . . . . . L283-450 . . . . . . . . . . . . . . L283-452 . . . . . . . . . . . . . . . L283-467 . . . . . . . . . . . . . . . L283-468 . . . . . . . . . . . . . . L283-469 . . . . . . . . . . . . . . L283-470 . . . . . . . . . . . . . . . L283-471 . . . . . . . . . . . . . . . L283-472 . . . . . . . . . . . . . . . L283-473 . . . . . . . . . . . . . . . L283-474 . . . . . . . . . . . . . . . L283-475 . . . . . . . . . . . . . . . L283-476 . . . . . . . . . . . . . . . L283-479 . . . . . . . . . . . . . . . L283-480 . . . . . . . . . . . . . . L283-481 . . . . . . . . . . . . . . . L283-482 . . . . . . . . . . . . . . L283-483 . . . . . . . . . . . . . . L283-484 . . . . . . . . . . . . . . L283-601 . . . . . . . . . . . . . . . L283-615 . . . . . . . . . . . . . . . L283-676 . . . . . . . . . . . . . . . L283-736 . . . . . . . . . . . . . . . L283-750 . . . . . . . . . . . . . . . L460P . . . . . . . . . . . . . . . . . . L462P . . . . . . . . . . . . . . . . . . L463P . . . . . . . . . . . . . . . . . . L464P . . . . . . . . . . . . . . . . . . L480 . . . . . . . . . . . . . . . . . . . L496P . . . . . . . . . . . . . . . . . . L583-004 . . . . . . . . . . . . . . L583-015 . . . . . . . . . . . . . . . L583-019 . . . . . . . . . . . . . . . L583-020 . . . . . . . . . . . . . . L583-021 . . . . . . . . . . . . . . . L583-022 . . . . . . . . . . . . . . L583-023 . . . . . . . . . . . . . . L583-024 . . . . . . . . . . . . . . L583-025 . . . . . . . . . . . . . . L583-026 . . . . . . . . . . . . . . L583-027 . . . . . . . . . . . . . . . L583-028 . . . . . . . . . . . . . . L583-029 . . . . . . . . . . . . . . L583-030 . . . . . . . . . . . . . . L583-031 . . . . . . . . . . . . . . . L583-035 . . . . . . . . . . . . . . L583-038 . . . . . . . . . . . . . . L583-043 . . . . . . . . . . . . . . L583-044 . . . . . . . . . . . . . . L583-045 . . . . . . . . . . . . . . L583-047 . . . . . . . . . . . . . . . L583-048 . . . . . . . . . . . . . . L583-049 . . . . . . . . . . . . . . L583-050 . . . . . . . . . . . . . . Page Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 441 PARTS INDEX INDEX Part Number Page Number Part Number Page Number L9457P . . . . . . . . . . . . . . . . . L9458P . . . . . . . . . . . . . . . . L9460P . . . . . . . . . . . . . . . . L9462P . . . . . . . . . . . . . . . . L9463P . . . . . . . . . . . . . . . . L9464P . . . . . . . . . . . . . . . . L9465LB . . . . . . . . . . . . . . . L9465P . . . . . . . . . . . . . . . . L9466P . . . . . . . . . . . . . . . . L9473LB . . . . . . . . . . . . . . . . L9473P . . . . . . . . . . . . . . . . . L9480LB . . . . . . . . . . . . . . . L9480P . . . . . . . . . . . . . . . . L9485LB . . . . . . . . . . . . . . . L9485P . . . . . . . . . . . . . . . . L9486P . . . . . . . . . . . . . . . . L9492P . . . . . . . . . . . . . . . . L9492P&93P EU & EL . . L9494P . . . . . . . . . . . . . . . . L9494P&95P EU & EL . . L9496P . . . . . . . . . . . . . . . . LM9210 . . . . . . . . . . . . . . . . LM9210F . . . . . . . . . . . . . . . LM9210M . . . . . . . . . . . . . . . LM9225 . . . . . . . . . . . . . . . . LM9225F . . . . . . . . . . . . . . . LM9225M . . . . . . . . . . . . . . LM9250FP . . . . . . . . . . . . . LM9250MP . . . . . . . . . . . . . LM9250P . . . . . . . . . . . . . . . LM9256FP . . . . . . . . . . . . . LM9256MP . . . . . . . . . . . . . LM9256P . . . . . . . . . . . . . . . LM9270FP . . . . . . . . . . . . . . LM9270MP . . . . . . . . . . . . . LM9270P . . . . . . . . . . . . . . . LM9271 . . . . . . . . . . . . . . . . . LM9271FP . . . . . . . . . . . . . . LM9271MP . . . . . . . . . . . . . . LM9271P . . . . . . . . . . . . . . . LM9280FP . . . . . . . . . . . . . LM9280MP . . . . . . . . . . . . . LM9280P . . . . . . . . . . . . . . LM9290EL or EU . . . . . . . LM9290FEL or EU . . . . . . LM9290MEL or EU . . . . . . LM9291EL or EU . . . . . . . . LM9291FEL or EU . . . . . . . LM9291MEL or EU . . . . . . LM9292ELP or EUP . . . . . LM9292FELP or EUP . . . . LM9292MELP or EUP . . . LM9293ELP or EUP . . . . . LM9293FELP or EUP . . . . LM9293MELP or EUP . . . LM9294MELP or EUP . . . LM9295ELP or EUP . . . . . LM9295FELP or EUP . . . LM9295MELP or EUP . . . LM9310 . . . . . . . . . . . . . . . . LM9325 . . . . . . . . . . . . . . . . LM9350P . . . . . . . . . . . . . . . LM9370P . . . . . . . . . . . . . . . LM9371P . . . . . . . . . . . . . . . LM9380P . . . . . . . . . . . . . . LT10 . . . . . . . . . . . . . . . . . . . . LT10F . . . . . . . . . . . . . . . . . . . 1 77, 179, 181, 183, 185 1 77, 179, 181, 183, 185 1 87 1 87 1 87 1 87 195 1 77, 179, 181, 183, 185 1 77, 179, 181, 183, 185 1 95 1 77, 179, 181, 183, 185 195 1 77, 179, 181, 183, 185 195 1 77, 179, 181, 183, 185 1 77, 181 1 77, 179, 181, 183 1 85 1 77, 179, 181, 183 1 85 1 77, 181 219, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 223 2 19, 223 2 19, 223 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 219, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19 2 21, 223, 225 2 19, 221, 223, 225 2 21, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 219, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 219, 221, 223, 225 219, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 219, 221, 223, 225 2 19, 221, 223, 225 219, 221, 223, 225 2 19, 221, 223, 225 2 19, 221, 223, 225 2 21, 223, 225 221, 223, 225 219, 221, 223, 225 177, 179, 181, 183 177, 181 177, 179, 181, 183 177, 179, 181, 183 177, 179, 181, 183 1 77, 179, 181, 183 260, 262 2 60, 262 LT40 . . . . . . . . . . . . . . . . . . . LT40F . . . . . . . . . . . . . . . . . . LT170 . . . . . . . . . . . . . . . . . . . LT172 . . . . . . . . . . . . . . . . . . . LV9040 . . . . . . . . . . . . . . . . LV9040B . . . . . . . . . . . . . . . LV9044 . . . . . . . . . . . . . . . . LV9050LB . . . . . . . . . . . . . . LV9050P . . . . . . . . . . . . . . . LV9056LB . . . . . . . . . . . . . . LV9056P . . . . . . . . . . . . . . . LV9060P . . . . . . . . . . . . . . . LV9070LB . . . . . . . . . . . . . . LV9070P . . . . . . . . . . . . . . . LV9071P . . . . . . . . . . . . . . . . LV9076P . . . . . . . . . . . . . . . LV9077P . . . . . . . . . . . . . . . LV9080LB . . . . . . . . . . . . . . LV9080P . . . . . . . . . . . . . . . LV9082LB . . . . . . . . . . . . . . LV9082P . . . . . . . . . . . . . . . LV9440 . . . . . . . . . . . . . . . . LV9444 . . . . . . . . . . . . . . . . LV9453LB . . . . . . . . . . . . . . LV9453P . . . . . . . . . . . . . . . LV9456LB . . . . . . . . . . . . . . LV9456P . . . . . . . . . . . . . . . LV9457P . . . . . . . . . . . . . . . LV9458P . . . . . . . . . . . . . . . LV9480LB . . . . . . . . . . . . . . LV9480P . . . . . . . . . . . . . . . LV9485LB . . . . . . . . . . . . . . LV9485P . . . . . . . . . . . . . . . LV9496P . . . . . . . . . . . . . . . 260, 262 260, 262 260, 262 260, 262 177, 179, 181, 183 195 177, 179, 181, 183 195 177, 179, 181, 183 195 177, 179, 181, 183 177, 179, 181, 183 195 177, 179, 181, 183 177, 179, 181, 183 177, 179, 181, 183 177, 179, 181, 183 195 177, 179, 181, 183 195 177, 179, 181, 183 179, 181, 183 177, 179, 181, 183 195 177, 179, 181, 183 195 177, 179, 181, 183 177, 179, 181, 183 177, 179, 181, 183 195 177, 179, 181, 183 195 177, 179, 181, 183 177, 181 M M204-152 . . . . . . . . . . . . . . M204-168 . . . . . . . . . . . . . . M204-198 . . . . . . . . . . . . . . M204-200 . . . . . . . . . . . . . M204-201 . . . . . . . . . . . . . . M504-271 . . . . . . . . . . . . . . . M504-306 . . . . . . . . . . . . . M504-347 . . . . . . . . . . . . . . M504-413 . . . . . . . . . . . . . . M504-424 . . . . . . . . . . . . . . M504-425 . . . . . . . . . . . . . . M504-426 . . . . . . . . . . . . . . M504-427 . . . . . . . . . . . . . . M504-428 . . . . . . . . . . . . . . M504-497 . . . . . . . . . . . . . . M504-548 . . . . . . . . . . . . . M540-000 . . . . . . . . . . . . . M540-051 . . . . . . . . . . . . . . M540-056 . . . . . . . . . . . . . MS-J175 . . . . . . . . . . . . . . . . N N123-007 . . . . . . . . . . . . . . . N123-008 . . . . . . . . . . . . . . N123-010 . . . . . . . . . . . . . . . N123-011 . . . . . . . . . . . . . . . . N123-012 . . . . . . . . . . . . . . . N123-013 . . . . . . . . . . . . . . . N123-020 . . . . . . . . . . . . . . . N123-021 . . . . . . . . . . . . . . . 3 80 4 17 4 20 4 17 4 17 3 75, 420 420 4 20 4 20 4 20 4 20 4 20 4 20 4 20 4 22 4 17 4 17 4 17 4 17 3 83 1 28 1 28 1 28 1 28 1 28 1 28 1 30 1 25 Price Book 8 442 Effective April 4, 2020 • Rev. 04/20 Part Number N123-022 . . . . . . . . . . . . . . . N123-032 . . . . . . . . . . . . . . . N123-034 . . . . . . . . . . . . . . . N123-035 . . . . . . . . . . . . . . . N123-040 . . . . . . . . . . . . . . N123-043 . . . . . . . . . . . . . . . N123-045 . . . . . . . . . . . . . . . N123-055 . . . . . . . . . . . . . . . N123-056 . . . . . . . . . . . . . . . N123-057 . . . . . . . . . . . . . . . N123-059 . . . . . . . . . . . . . . . N123-062 . . . . . . . . . . . . . . . N123-076 . . . . . . . . . . . . . . . N123-085 . . . . . . . . . . . . . . . N123-086 . . . . . . . . . . . . . . N123-087 . . . . . . . . . . . . . . . N123-097 . . . . . . . . . . . . . . . N123-098 . . . . . . . . . . . . . . N223-062 . . . . . . . . . . . . . . N223-063 . . . . . . . . . . . . . . N223-066 . . . . . . . . . . . . . . N523-000 . . . . . . . . . . . . . . N523-001 . . . . . . . . . . . . . . N523-002 . . . . . . . . . . . . . . N523-013 . . . . . . . . . . . . . . . N523-019 . . . . . . . . . . . . . . . N523-020 . . . . . . . . . . . . . . N523-022 . . . . . . . . . . . . . . N523-023 . . . . . . . . . . . . . . N523-025 . . . . . . . . . . . . . . N523-041 . . . . . . . . . . . . . . . N523-054 . . . . . . . . . . . . . . N523-055 . . . . . . . . . . . . . . N523-063 . . . . . . . . . . . . . . N523-064 . . . . . . . . . . . . . . N523-065 . . . . . . . . . . . . . . N523-066 . . . . . . . . . . . . . . N523-067 . . . . . . . . . . . . . . N523-069 . . . . . . . . . . . . . . N523-091 . . . . . . . . . . . . . . . N523-105 . . . . . . . . . . . . . . . N523-108 . . . . . . . . . . . . . . . N523-123 . . . . . . . . . . . . . . . N523-124 . . . . . . . . . . . . . . . N523-127 . . . . . . . . . . . . . . . N523-131 . . . . . . . . . . . . . . . N523-149 . . . . . . . . . . . . . . . N523-177 . . . . . . . . . . . . . . . N523-194 . . . . . . . . . . . . . . . N523-209 . . . . . . . . . . . . . . N523-210 . . . . . . . . . . . . . . . N523-211 . . . . . . . . . . . . . . . . N523-218 . . . . . . . . . . . . . . . N523-221 . . . . . . . . . . . . . . . N523-222 . . . . . . . . . . . . . . . N523-223 . . . . . . . . . . . . . . . N523-224 . . . . . . . . . . . . . . N523-225 . . . . . . . . . . . . . . . N623-017 . . . . . . . . . . . . . . . P P513-023 . . . . . . . . . . . . . . . P513-024 . . . . . . . . . . . . . . . PL7-2 . . . . . . . . . . . . . . . . . . . PL7-3 . . . . . . . . . . . . . . . . . . . PL7-5 . . . . . . . . . . . . . . . . . . . PL7-7 . . . . . . . . . . . . . . . . . . . Page Number 125 125 125 125 130 125 128 1 28 125 125 128 128 128 125 125 125 128 128 128 128 128 125 125 125 128 128 128 313, 316, 345 316 128 128 128 128 128 1 28 128 128 128 128 126, 344 128 420 313, 316 125 126 128 128 128 128 125 125 125 1 25 125 125 125 125 125 128 421 421 282 282 282 282 INDEX Page Number Part Number Page Number PL8-2 . . . . . . . . . . . . . . . . . . PL8-3 . . . . . . . . . . . . . . . . . . PL8-5 . . . . . . . . . . . . . . . . . . PL8-8 . . . . . . . . . . . . . . . . . . 2 82 282 282 282 S605-194 . . . . . . . . . . . . . . . S605-228 . . . . . . . . . . . . . . S605-231 . . . . . . . . . . . . . . . S605-241 . . . . . . . . . . . . . . . S605-242 . . . . . . . . . . . . . . S605-289 . . . . . . . . . . . . . . S605-297 . . . . . . . . . . . . . . SM01-210 . . . . . . . . . . . . . . . SM01-391 . . . . . . . . . . . . . . . SM01-392 . . . . . . . . . . . . . . 2 54, 274 3 16, 317 3 14, 316 2 54, 274 2 54, 274 2 56 2 56 3 86 386 3 86 Q Q330-165 . . . . . . . . . . . . . . . 3 40 Q330-252 . . . . . . . . . . . . . . 340 R R525-256 . . . . . . . . . . . . . . 150 S S10D . . . . . . . . . . . . . . . . . . . S40D . . . . . . . . . . . . . . . . . . . S51PD . . . . . . . . . . . . . . . . . . S70PD . . . . . . . . . . . . . . . . . . S80PD . . . . . . . . . . . . . . . . . S170 . . . . . . . . . . . . . . . . . . . . S206-501 . . . . . . . . . . . . . . . S206-502 . . . . . . . . . . . . . . S206-504 . . . . . . . . . . . . . . S206-515 . . . . . . . . . . . . . . . S206-516 . . . . . . . . . . . . . . . S206-517 . . . . . . . . . . . . . . . S206-518 . . . . . . . . . . . . . . . S206-523 . . . . . . . . . . . . . . S210-B60 . . . . . . . . . . . . . . S210PD . . . . . . . . . . . . . . . . . S251PD . . . . . . . . . . . . . . . . . S270PD . . . . . . . . . . . . . . . . S280PD . . . . . . . . . . . . . . . . S290 . . . . . . . . . . . . . . . . . . . S306-135 . . . . . . . . . . . . . . . S306-151 . . . . . . . . . . . . . . . S306-180 . . . . . . . . . . . . . . S306-182 . . . . . . . . . . . . . . . S306-183 . . . . . . . . . . . . . . . S605-192 . . . . . . . . . . . . . . . 2 72 272 272 272 272 272 246 246 2 46 246 246 246 246 246 243 252 252 252 252 252 321 256 275 275 275 314, 317 T THP-021 . . . . . . . . . . . . . . . . THP-022 . . . . . . . . . . . . . . . THP-8201-CH . . . . . . . . . . THP-8201-F-CH . . . . . . . . THP-8219-CH . . . . . . . . . . THP-8219-F-CH . . . . . . . . THP-8301-CH . . . . . . . . . . THP-8301-F-CH . . . . . . . . THP-8319-CH . . . . . . . . . . . THP-8319-F-CH . . . . . . . . THP-S88806-IR . . . . . . . . TR200A . . . . . . . . . . . . . . . . TR201 . . . . . . . . . . . . . . . . . . TR202 . . . . . . . . . . . . . . . . . . TR203 . . . . . . . . . . . . . . . . . . X XA10-594 . . . . . . . . . . . . . . XB03-418 . . . . . . . . . . . . . . XB04-618 . . . . . . . . . . . . . . XB09-195 . . . . . . . . . . . . . . XB09-795 . . . . . . . . . . . . . . XB11-475 . . . . . . . . . . . . . . . XB11-638 . . . . . . . . . . . . . . . XB11-720 . . . . . . . . . . . . . . . XB11-789 . . . . . . . . . . . . . . . XB11-790 . . . . . . . . . . . . . . . XB11-825 . . . . . . . . . . . . . . . 2 66 2 66 265 2 65 265 2 65 265 265 265 265 266 414 414 4 14 4 14 3 17 3 51 3 51 3 51 3 51 3 51 3 51 2 10 3 51 3 51 3 47 Part Number XB11-916 . . . . . . . . . . . . . . . . XB11-917 . . . . . . . . . . . . . . . . XB11-918 . . . . . . . . . . . . . . . . XB11-919 . . . . . . . . . . . . . . . . XB11-920 . . . . . . . . . . . . . . . XB11-921 . . . . . . . . . . . . . . . . XB11-922 . . . . . . . . . . . . . . . XB11-958 . . . . . . . . . . . . . . . XB11-979 . . . . . . . . . . . . . . . XB12-046 . . . . . . . . . . . . . . XC03-069 . . . . . . . . . . . . . . XK10-992 . . . . . . . . . . . . . . XL11-422 . . . . . . . . . . . . . . . . XL11-515 . . . . . . . . . . . . . . . . XL11-634 . . . . . . . . . . . . . . . XL11-636 . . . . . . . . . . . . . . . XL11-743 . . . . . . . . . . . . . . . . XL11-848 . . . . . . . . . . . . . . . XL11-895 . . . . . . . . . . . . . . . XL11-986 . . . . . . . . . . . . . . . XN12-012 . . . . . . . . . . . . . . . XN12-035 . . . . . . . . . . . . . . . XN12-045 . . . . . . . . . . . . . . XN12-292 . . . . . . . . . . . . . . . XN13-052 . . . . . . . . . . . . . . XN13-053 . . . . . . . . . . . . . . . XN13-054 . . . . . . . . . . . . . . XQ02-309 . . . . . . . . . . . . . . XQ03-493 xx . . . . . . . . . . . XQ03-494 . . . . . . . . . . . . . . XQ06-878 . . . . . . . . . . . . . . XQ07-351 . . . . . . . . . . . . . . . XQ07-351 xx . . . . . . . . . . . . XQ07-351 xxx . . . . . . . . . . XQ11-804 . . . . . . . . . . . . . . . XQ11-935 . . . . . . . . . . . . . . . Page Number 1 63 163 1 63 1 63 1 63 163 1 63 3 51 3 41 3 39 108, 129 2 10 2 10 2 10 2 10 2 10 2 10 2 10 3 32 2 04 1 29 1 25 1 25 126 129 1 29 1 29 1 08, 129 1 39 1 08, 129 3 77 8 2, 108, 129, 275 1 39 275 351 3 32 PARTS INDEX Part Number Price Book 8 Effective April 4, 2020 • Rev. 04/20 443 PARTS INDEX Notes Price Book 8 444 Effective April 4, 2020 • Rev. 04/20 About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com © 2020 Allegion 010057, Rev. 04/20 allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2020:01:09 14:45:22-06:00 Modify Date : 2020:02:25 13:00:27-06:00 Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c016 91.163616, 2018/10/29-16:58:49 Metadata Date : 2020:02:25 13:00:27-06:00 Format : application/pdf Document ID : uuid:522f1621-93c2-464a-93bb-f39aaca414b2 Instance ID : uuid:c448e6e6-fa88-3147-822e-2000c135fc77 Page Count : 446EXIF Metadata provided by EXIF.tools