Schlage Cylinders And Keyways Brochure ALX Reference Guide Key Blanks Quick 109158 1
Schlage Cylinders and Keyways Quick Reference Guide Schlage_Cylinders_and_Key_Blanks_Quick_Reference_Brochure_109158 Product Guide
User Manual: Schlage ALX Cylinders and Keyways Reference Guide Product Guide
Open the PDF directly: View PDF 
.
Page Count: 8
Cylinders
and keyways
Quick reference guide
The name you know
For more than 90 years, Schlage® products have been a preferred security
solution for schools, hospitals, hotels, condominiums and a host of other
commercial buildings. Today, the Schlage name can be found on locksets
across the nation and around the world. With such a large installed base
and the diverse range of keyway products that support it – it’s easy to see
why Schlage should be a part of your business too.
Putting control in your hands
Innovation is at the forefront of all Schlage mechanical and electronic
security. Our approach creates layered security to specifically address both
physical and administrative needs for a full range of security options. You
have the flexibility within a single key system to utilize open or restricted
keyways interwoven with Primus® XP for the highest levels of keyway
security on openings where it counts most.
The height of security
Among the many Schlage options, Primus XP featured products with UL 437 listed physical security improvements let
you utilize the highest levels of Schlage key system security. With Primus XP you can control patented side bit milling
designs with exclusivity based on geographic area to the level that best suites the facility security needs.
Primus® XP Levels Cylinder and key ordering process
Classic Everest 29™Exclusivity Commitment End user Dealer Shipping
Dealer controlled
1None None
Order through
any authorized
Schlage dealer
Standard order To dealer
from distributor
1+ 7 Zip code
(first 3 digits) Formal agreement and initial
Primus XP inventory order
Order through
originating Primus
XP dealer only
Dealer to provide
Primus XP I.D. and
keyway section
name or number
To dealer
from factory
2 8 Time zone
End user controlled
3U 9U Random
(not exclusive)
Initial purchase of 59 or
fewer cylinders
Provide signed face
sheet with order
specifying keyway
to any Primus XP
authorized dealer
Dealer to provide end
user’s Primus XP I.D.
and keyway section
name or number
End user determined
3G 9G Zip code
(first 2 digits)
Initial purchase of 60 or
more cylinders
4Z 9Z Time zone
Initial purchase of 2,000 or
more cylinders or alternative
fee based arrangement
4N 9N Nationwide
Initial purchase of 4,000 or
more cylinders or alternative
fee based arrangement
Primus XP exclusivity
2 • Schlage • Cylinders and keyways
End user controlled; non-exclusive
Authorized dealer only
No authorization
Primus® XP geographically exclusive
side bit milling options
Schlage Everest 29™
Schlage
Classic End user exclusive nationwide 4N 9N
End user exclusive within time zone/country 4Z 9Z
End user exclusive within zip code 3G 9G
End user controlled; non-exclusive 3U 9U
Dealer exclusive within time zone/country 28
Dealer exclusive within zip code 1+ 7
Authorized dealer only; non-exclusive 1
OPEN
Schlage Classic
FSIC and Conventional
• Duplicate anywhere
• Patented design
• Check pin in cylinder
• Requires letter
of authorization
• Patented design
• Check pin in cylinder
• 5 levels of side bit
milling exclusivity
• Patent protection
to 2024
• Independent sidebar
and fi nger pin
locking mechanisms
• 5 levels of side bit
milling exclusivity
• Patent protection
to 2029
• Independent sidebar
and fi nger pin
locking mechanisms
• Hardened steel
drill pins
• Proven pick and
drill resistant
• Withstands extreme
physical attack
OPEN
Schlage Everest 29 S
FSIC and Conventional
RESTRICTED
Schlage Everest 29 R1
SFIC and Conventional2
Schlage Everest 29 T
FSIC and Conventional
UL 437 Option
UL listed security
improvements
available with
Primus XP
Primus XP
RESTRICTED
Schlage Everest 29 R
Conventional*
Schlage Everest 29 S
FSIC and Conventional
Schlage Everest 29 T
FSIC and Conventional
Primus XP
RESTRICTED
Schlage Classic
FSIC and Conventional
Physical Security
Administrative Security
COMPARABLE ELECTRONIC SECURITY - Ensure your credential is a secure as your keyway
Proximity credentials
• Easily duplicated
MIFARE Classic®
smart credentials
• Secure encrypted data
and communications
• Di cult to duplicate
MIFARE Plus® and MIFARE® DESFire® EV1 smart credentials
• Advanced data encryption makes duplication nearly impossible
• Most secure credentials available from Schlage
1. Limited dealer controlled programs available.
2. Conventional in the form of SL cylinder that accepts SFIC key.
Conventional,
key-in-lever cylinders
Schlage conventional
cylinders offer extreme
versatility in a modular design.
One cylinder is the foundation
for any Schlage key-in-lever,
rim or mortise cylinder need.
Solid brass bar stock
construction and hardened
stainless steel housings
9 mortise cylinder
cam options
13 mortise and rim cylinder
face finishes
4 plug face finish options
FSIC interchangeable
core cylinders
Schlage full size
interchangeable cores are
based on the industry
standard plug diameter of ½".
They are available for a variety
of Schlage key systems.
6-pin
All brass cylinder
and housings
9 mortise cylinder
cam options
10 mortise and rim cylinder
housing face finishes
4 core finish options
SFIC interchangeable
core cylinders
Based on the industry
standard SFIC plug diameter
size which is less than ½",
Schlage cores can be used in
place of Best, Falcon and
other SFIC cores on
competitive locksets.
7-pin
All brass cylinder
and housings
9 mortise cylinder
cam options
10 mortise and rim cylinder
housing face finishes
3 core finish options
SL cylinders
The SL cylinder is a full size
key-in-lever cylinder that
accepts an SFIC A2 key
system. It allows multiple key
systems to be unified as one
without replacing installed
cylindrical lock hardware.
7-pin
Solid brass bar stock
construction and hardened
stainless steel housings
Fits Schlage modular
components for use
as key-in-lever, rim or
mortise cylinder
Design security to fit your needs
3 • Schlage • Cylinders and keyways
1. Limited dealer controlled programs available.
2. Conventional in the form of SL cylinder that accepts SFIC key.
Patented design
Everest 29 key systems protect against unauthorized duplication
two ways. First, key blanks are tightly controlled by Allegion
to ensure access for only authorized dealers. Secondly, patent
protection deters duplication of the design - an offense subject to
federal law. They are available as both open and restricted keyways
to give you the level of security you need for every application.
Benefits
Patent protection to 2029
Key duplication on standard (basic) key cutting equipment
Multi-level key hierarchy and cylinders fit a wide variety of locks
Through-cut technology creates the patented undercut
key design
Added cylinder check pin improves physical security of the lock
20% thicker key for greater strength
Backward compatible to Everest® keyways
Large installed base of legacy Everest and Everest 29 keyways
Fits an extensive list of competitor’s locks
Open keyways
No ordering formalities
Legacy keyway still available to order
Schlage Everest 29 S
FSIC and Conventional cylinders
6-pin length
Backward compatible to legacy Everest C
Supplied as Everest 29 S123 as the default
keyway on commercial locks
Restricted keyways
Letters of authorization are required with
available online validation process
Legacy keyways still available to order
Schlage Everest 29 R
SFIC and Conventional (SL) cylinders
7-pin length
Backward compatible to Everest B
Schlage Everest 29 T
FSIC and Conventional cylinders
6-pin length
Backward compatible to Everest D
Body
End cap
pin springTail piece
End cap
Body cover
Pin springs
Pins
Plug
Check pin spring
Check pin
Available in
Schlage Everest 29™
keyways
End cap pin
4 • Schlage • Cylinders and keyways
Available in
Critical points of entry and highly-sensitive areas need
extra protection. Here, Schlage cylinders with added Primus
XP features can be applied to improve levels of Schlage
physical security and administrative control. Even Schlage
Classic Obverse open keyways gain the same levels of
physical security as Everest 29 keyways with Primus XP
features added to the cylinder.
Benefits
Adds patent protection to 2024 for Schlage Classic
Obverse keyways
Unique side bit milling designs can be assigned to dealer
or end user with various levels of geographic exclusivity
No special key duplication equipment; uses Schlage
standard pins
Depending on level of exclusivity, keys are marked with ID
number for traceability
Multi-level key hierarchy and cylinders fit a wide variety
of locks
Independent sidebar and finger pin locking mechanisms
increase pick and bump resistance
Fully compatible to all Everest and Everest 29 keyways
Fits an extensive list of competitor’s locks
Body
End cap
pin spring
End cap pin
Tail piece End cap
Restricted keyways
Cylinder and key blank ordering process varies
depending on level of program.
Schlage Classic Obverse
FSIC and Conventional cylinders
6-pin length
Schlage Everest 29 R
Conventional SL cylinders
7-pin length
Compatible to any Everest 29 R or legacy
Everest B keyway
Schlage Everest 29 T
FSIC and Conventional cylinders
6-pin length
Compatible to any Everest 29 T or legacy
Everest D keyway
UL 437 option adds:
Hardened steel drill pins
Proven pick and drill resistant
Withstands extreme physical attack
Body cover
Pin springs
Pins
Plug
Finger pin springs
Finger pins
Primus side bar
Primus side bar springs
Primus® XP security
Schlage cylinders with
Primus XP features
5 • Schlage • Cylinders and keyways
Available in
Plug
cover
Plug clip
End cap pin
End cap pin spring
Locking side bar
Body
Tail piece
End cap
Locking side bar springs
Pin
springs
L pins
Anti-drill
pins
Plug
Check pin
spring
Check pin
The SL advantage
The exclusive SL cylinder creates an opportunity to unify
separate key systems on multi-building campuses into one
restricted, A2 key system upgradeable to Primus XP security.
Wherever you have conventional, key-in-lever cylinders and
Small Format Interchangeable Cores (SFIC) on one campus,
you can replace the conventional cylinders with new 7-pin
SL cylinders and, if needed, upgrade to Schlage the SFIC
cores under one key system. Instead of replacing the installed
cylindrical locksets, significant savings can be gained by
simply swapping cylinders.
Benefits
Patented L-pin design enables an SFIC Everest 29® key to
fit a conventional cylinder
Enables Primus XP exclusivity and physical security
features to be introduced into an SFIC based facility
Locking side bar mechanism improves pick and
bump resistance
Key duplication on standard (basic) key cutting equipment
SL cylinders fit all Schlage and Falcon® cylindrical locks
Backward compatible to Everest B keyway families
Large installed base of legacy Everest B and
Everest 29® R keyways
Fits an extensive list of competitor’s locks
Restricted keyways
Cylinder and key blank ordering process varies
depending on level of program.
Schlage Everest 29 R
Conventional cylinder form
SFIC A2 key system
7-pin length
Compatible to any Everest 29 R or legacy
Everest B keyway
S
Schlage patented
Everest 29 SL cylinder
6 • Schlage • Cylinders and keyways
The L pin
The patented SL cylinder has
a unique L pin design allowing
a single, unified Everest 29 R
key system to be applied to
both SFIC and Schlage
conventional cylinder locks.
Schlage conventional cylinders offer extreme versatility in a modular
design. One key-in-lever cylinder is the foundation for also creating any
Schlage rim or mortise cylinder. You save on inventory costs and gain
flexibility on the job.
All cylinders manufactured aer June 2010 are modular design based
The modular cylinder design can accept any Schlage keyway family
Solid brass bar stock cylinder construction and hardened stainless
steel housings
Rear mortise cylinder housing sizes range from 1 1⁄8" to 1 3⁄4"
Fits all Schlage locksets and deadbolts
13 face finish options, six mortise housing lengths, one rim housing,
four plug face finishes, six tailpieces and nine cam options create a
thousand potential cylinder configurations
Parts
Modular cylinders use fewer parts because the
cylinder and a small number of screws, cams
and plug extensions can be universally applied.
The major of parts are simply the rear housings in
various lengths and finishes.
Key-in-lever
Rim
Mortise
Modular flexibility
Field configurable
to fit the need
Cam and cam screw
Long plug extension kit
Short plug
extension kit
Housing
screws
1 1⁄8" Rear
housing
Key-in-lever cylinder
Available in
all finishes
1 1⁄4" Rear
housing
1 3⁄8"
1 1⁄2"
1 5⁄8"
Front house
with faceplate
Finish
Options
Colors Bright
brass
Satin
brass
Antique
brass
Satin
bronze
Oil
rubbed
bronze
Satin
nickel
Matte
black
Bright
chrome
Satin
chrome
Satin
chrome
Bright
stainless
steel
Satin
stainless
steel
Aged
bronze
ANSI/
BHMA # 605 606 609 612 613 619 622 625 626 626AM 629 630 /
630AM 643e
Plug faces n n n n
Mortise and
rim faces nnnnnnnnnnnnn
7 • Schlage • Cylinders and keyways
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading
brands like CISA®
, Interflex®
, LCN®
, Schlage®
, SimonsVoss® and Von Duprin®.
Focusing on security around the door and adjacent areas, Allegion produces
a range of solutions for homes, businesses, schools and other institutions.
Allegion is a $2 billion company, with products sold in almost 130 countries.
For more, visit www.allegion.com
About Allegion
© 2018 Allegion
009158, Rev. 01/18
www.allegion.com/us
