Schlage 2018 Price Book (as Of 7/9/18) JULY

User Manual: Schlage 2018 Schlage Price Book (as of 7/9/18) Price Book

Open the PDF directly: View PDF PDF.
Page Count: 448 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Effective July 9, 2018
Price book 6
Price Book 6
Effective July 9, 2018
2
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
Administrative Offices
Allegion Administrative Office
11819 N. Pennsylvania St.
Carmel, IN 46032
allegion.com/us
Customer Care
Our Customer Care Representatives are available for questions or assistance.
You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or
through the email addresses listed below:
Request for Quote
Placing orders
You can place orders with Allegion via the fax numbers or emails listed below:
Mechanical Locks & Key Systems
Fax#: 1-800-452-0665
Email: Order_Entry_Schlage_Commercial@allegion.com
Carolinas
(North Carolina, South Carolina, Virginia)
Carolinas.Quotes@allegion.com
Central
(Arkansas, Illinois, Iowa, Kansas, Missouri,
Nebraska, Oklahoma)
Central.Quotes@allegion.com
Chicago
(Illinois-Northern, Wisconsin)
Chicago.Quotes@allegion.com
Florida
Florida.Quotes@allegion.com
Great Lakes
(New York, Pennsylvania)
GreatLakes.Quotes@allegion.com
Metro New York
Metro.Quotes@allegion.com
Technical Product Support
Mechanical Locks/Keying Systems
Mechanical_Locks_TechProdSupport@allegion.com
Michigan
Michigan.Quotes@allegion.com
Mid Atlantic
(Delaware, Maryland, New Jersey)
MidAtlantic.Quotes@allegion.com
Midwest
(Indiana, Kentucky, Ohio, West Virginia)
Midwest.Quotes@allegion.com
Mountain States
(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)
Mtn.States.Quotes@allegion.com
New England
(Connecticut, Main, Massachusetts, New Hampshire,
Rhode Island, Vermont)
NewEngland.Quotes@allegion.com
North Central
(Minnesota, North Dakota, South Dakota)
NorthCentral.Quotes@allegion.com
Northern California
NoCal.Quotes@allegion.com
Northwest
(Alaska, Oregon, Washington)
Northwest.Quotes@allegion.com
South
(Alabama, Georgia, Louisiana, Mississippi, Tennessee)
South.Quotes@allegion.com
Southern California
(California-Southern, Hawaii)
SoCal.Quotes@allegion.com
Southwest
(Arizona, New Mexico)
Southwest.Quotes@allegion.com
Texas
Texas.Quotes@allegion.com
Residential Locks
Fax#: 1-800-366-5625
Email: Res_Contact_Center@allegion.com
FastTrack
Fax#: 1-800-288-4242
Email: Order_Fasttrack@allegion.com
Sales Support
support@allegion.com
3
Price Book 6
Effective July 9, 2018
Table of Contents
Terms & Conditions ............................ 10-28
Allegion General Tems & Conditions ...........................10
Schlage Standard Terms ................................................. 14
Product Warranties ...........................................................17
Commercial Applications ................................................17
Residential Applications ..................................................17
Distributor Function and Location Policy ...................18
Distributor Function and Location Policy ...................20
Cylinder Policies .................................................................. 21
Primus® Sales Policy..........................................................21
Everest® Sales Policy .........................................................21
Everest Small Format Interchangeable ...................... 21
Core Key Control Policies .................................................21
Restricted Keyway Policy ................................................21
Construction Core Program Policy ................................21
Master Key Shipment Policy...........................................23
Hardware Finishes .............................................................24
Forms & Examples ............................. 29-56
How To Order ......................................................................30
Ordering Examples ............................................................31
Order Forms .........................................................................32
Using Order Forms .............................................................33
Sequential List of Order Forms ...................................... 34
CYLINDRICAL 57-116
A-Series ....................................... 57-70
Functions ..............................................................................60
Complete Locks ..................................................................61
Options ..................................................................................63
Parts ....................................................................................... 65
AL-Series ...................................... 71-84
Functions ..............................................................................74
Options ..................................................................................77
Parts ....................................................................................... 79
D-Series Knobs ................................ 85-96
Functions ..............................................................................88
Coomplete Locks................................................................89
Options ..................................................................................91
Parts ....................................................................................... 92
ND-Series Levers .............................. 97-116
Functions ..............................................................................100
Complete Locks ..................................................................103
Options ..................................................................................105
Conversion Guide ................................................................108
Parts ....................................................................................... 110
DEADBOLT 117-150
B250-Series ................................... 117-126
Functions ..............................................................................120
Complete Locks ..................................................................121
Options ..................................................................................122
Parts ....................................................................................... 123
B500-Series ................................... 127-138
Functions ..............................................................................130
Complete Locks ..................................................................131
Options ..................................................................................133
Parts ....................................................................................... 134
B600/700/800-Series ........................ 139-150
Functions ..............................................................................142
Complete Locks ..................................................................143
Options ..................................................................................145
Parts ....................................................................................... 146-
MORTISE 151-196
L-Series ....................................... 151-196
Functions ..............................................................................154
Complete Locks ..................................................................162
Options ..................................................................................172
Distributor Pack Program ................................................178
Parts ....................................................................................... 182
MULTIPOINT 197-220
LM9200-Series ................................ 197-220
Functions ..............................................................................200
Complete Locks ..................................................................202
Options ..................................................................................210
Parts ....................................................................................... 213
4
Price Book 6
Effective July 9, 2018
Table of Contents
INTERCONNECTED 221-254
CS210-Series .................................. 221-230
Functions ..............................................................................224
Complete Locks ..................................................................225
Options ..................................................................................228
Parts ....................................................................................... 229
H-Series (Discontinued) ....................... 231-244
S200-Series ................................... 245-254
Functions ..............................................................................248
Complete Locks ..................................................................249
Options ..................................................................................251
Parts ....................................................................................... 252
TUBULAR 255-274
LT-Series ...................................... 255-264
Functions ..............................................................................258
Completre Locks .................................................................259
Options ..................................................................................262
Parts ....................................................................................... 263
S-Series ....................................... 265-217
Functions ..............................................................................268
Complete Locks ..................................................................269
Options ..................................................................................271
Parts ....................................................................................... 272
SPECIALTY 275-286
HL-Series ...................................... 275-286
Functions ..............................................................................278
Parts ....................................................................................... 283
PORTABLE SECURITY 287-302
Portable Security .............................. 287-302
PL Series Cross Reference ...............................................290
Key-in-Lever with Cylinder .............................................. 291
Key-in-Lever Less Cylinder ..............................................292
SFIC Less Cylinder ..............................................................293
Full Size IC Core ...................................................................294
Custom Engraving Brass Padlocks and
Chrome Plated Brass Padlocks ......................................295
Parts and Accessories .......................................................296
Special Security ..................................................................299
CYLINDRICAL / KEYS / AUXILIARY 303-416
Cylinders ...................................... 303
Multiple Tailpiece Cylinders ............................................ 306
Bulk Pack Cylinders ...........................................................307
Unassembled Multiple Tailpiece Cylinders ................308
Bulk Pack Cylinders ...........................................................309
Primus Cylinders-Sub Assembled .................................311
A & H, AD, AL CL, D, ND, F, FA, PL, S & S200 ............. 312
B500 ......................................................................................320
B250, B400, E/B, F100, H, MD, S200 ..........................322
B600/700/800 .................................................................. 326
Mortise ................................................................................... 330
Schlage cylinders for Falcon & Von Duprin ................ 341
Rim Cylinders ....................................................................... 343
Interchangeable Cores......................................................345
Competitor Retrofit Cylinders ........................................347
Mailbox .................................................................................. 352
Special Cylinders ................................................................353
Pins, Springs & Pinning Compoents .............................354
Plugs ......................................................................................357
Shells .....................................................................................360
Keys & Keying ................................. 361-408
Keys Ordered Separately .................................................364
Key Stamping ...................................................................... 379
Cylinder Stamping .............................................................380
Construction Core Program .............................................381
Keying Charges ...................................................................383
Sitemaster 200® ................................................................. 388
CL-Series ...................................... 409-416
Complete Locks ..................................................................412
Options ..................................................................................415
Parts ....................................................................................... 416
TOOLS AND KITS 417-430
Tools & Kits ................................... 417-426
Keying Tools & Kits............................................................418
Tools ......................................................................................421
Tools ......................................................................................422
Kits .......................................................................................... 423
Merchandising Aids ............................ 427-430
Display Mounts ...................................................................428
Miscellaneious ..................................................................... 430
PARTS INDEX 431-445
Index .......................................... 431-445
Price Book 6
Effective July 9, 2018 5
How to Use the Price Book
Ordering Options Form Name and Number Notes
Commercial Products *
1. Standard Orders
These orders are for the comprehensive listing of the
current product offering shown in this price book.
Your Purchase Order
See information required on your
order in “Forms & Examples” price
book tab.
All orders will be processed based on normal
factory lead times. An anticipated ship date will
be included with each order acknowledgement.
2. Schlage Innovation Center Orders (RFQ)
These orders are for Request For Quote (RFQ) orders
which are not covered in the price book and are
subject to longer lead times. These orders may not
be combined with any Master Keyed or Non-Master
Keyed products. Use this process for custom logo
requests.
Schlage Innovations Center
Product Request Form
See the “Innovation Center
Product Request Process”
on Page 6.
These products are not in the price book and
must be requested for consideration. Instructions
are included in the Innovations Center Product
Request Process in this section.
3. FastTrack Orders
These orders are for products in the FastTrack price
book and qualify for expedited order processing.
This program includes Schlage and Allegion brand
products. Please consult your sales representative for
FastTrack program availability in your area.
Refer to FastTrack price book. See current FastTrack price book.
Phone number 1-877-671-7011 or
fax number 1-800-288-4242.
Keys
1. Master Keyed Orders
These orders are subject to standard lead time and
process. Please attach the necessary forms if a
restricted key system or Primus order.
Master Keyed Order Form
ms-i100.01 Rev. 3/14
ms-i100.02 Rev. 3/14
ms-i150 Rev. 3/14
Use of order forms other than Schlage order
forms can result in an increased lead time. An
anticipated ship date will be included with each
order acknowledgement.
2. Non-Master Keyed Orders
These orders are subject to standard lead time and
process. If you are ordering a restricted key system or
Primus order, please attach the necessary forms.
Non-Master Keyed
Order Form
ms-i250 Rev. 3/14
ms-i300 Rev. 3/14
Use of order forms other than Schlage order
forms can result in an increased lead time.
3. Primus Face Sheet
Original signed form must accompany any Primus or
Primus XP level 3, 4, or 9 order.
Primus Face Sheet
ms-e120 Rev. 3/14
Must submit original forms, copies are not
accepted.
4. Primus Signature Card
Original signed form must accompany any NEW
Primus or Primus XP level 3, 4, or 9 order.
Primus Signature Form
ms-e130 Rev. 03/14
Please make sure the form identifies the key sys-
tem as NEW or EXISTING If removeable cores,
make sure control keys are ordered. Do not
forget to mark the type of keys, stamping
information, etc.
5. Key System Summary
Please fill in all appropriate fields. Contact your local
SSC sales office for help.
Key System Summary
ms-i200 Rev. 3/14
All 4 Pages
All orders will be processed based on
normal factory lead times. An anticipated ship
date will be included with each order
acknowledgement.
Residential
1. Standard Order Plan
All residential Schlage, and Dexter by Schlage prod-
ucts currently listed in this price book.
Your Purchase Order
see information required on your
order in “Forms & Examples” price
book tab.
All orders will be processed based on
normal factory lead times. An anticipated ship
date will be included with each order
acknowledgement.
Price Book 6
Effective July 9, 2018
6
How to Use the Price Book
Standard Products
In each tabbed section of this Price Book you will find a comprehensive listing of our current offering per product series. Products
should be ordered via the traditional method by designating the product, design, finish, handing, and options for each line item (refer
to “How to Order” in the Forms & Examples section of the price book). All orders will be processed based on normal factory lead
times. These lead times vary throughout the year and are affected by production volumes, supplier schedules and quantity demands.
An anticipated ship date will be included with each order acknowledgement.
Some of the products listed in these sections require extended lead times. You will find the hourglass symbol (6) associated with
products that require extended lead times so that you are aware of this condition prior to placing your order. Products included in this
classification are those items that represent a unique combination of product attributes (i.e. finish, trim, function, etc.) that typically
require additional manufacturing care and attention. Products marked “6” will routinely exceed normal factory lead times and antici-
pated ship dates will be indicated with each order acknowledgement.
Schlage Innovation Center Product Request Process
Schlage Innovation Products are products that are not in the price book and are formally requested through the Schlage Innovation
Center Product Request Process. Examples of these products include:
· Products which at one time were offered for sale by Schlage but are no longer available in the current price book.
· Finishes not listed as standard for a product in the price book.
· “True” custom products, which are new variations on current or past products.
· Custom logo requests.
How to Request a Quote for a Custom Lock Product
• Custom lock products can only be ordered by and shipped to current Allegion Channel Partners
· Innovation Center Product Request Form can be obtained by:
- Sending an email request to Mechanical_Locks_TechProdSupport@allegion.com
- Searching Knowledge Center tool at http://kc.allegion.com/ for Innovation Center Product Request Form
- Contact Schlage Product Support at 877-671-7011, option 2, option 1
· Send the completed request form to Mechanical_Locks_TechProdSupport@allegion.com
· Upon receipt the Innovation Center Product Request Form coordinator will assign an RFQ#, review, and clarify the request
as needed
· Within 5-working days your request will be either denied or approved
- If approved, Schlage will communicate the RFQ#, NET pricing, and lead time
- If denied you will be notified with an explanation
· RFQ# is valid for 6 months
· To place an order submit the approved RFQ form and purchase order with the RFQ# prominently displayed to
Order_Entry_Schlage_Commercial@allegion.com
· Changes to the original request after a quote approval may incur additional charges and affect lead time
- Prior to PO submittal send all change requests to Mechanical_Locks_TechProdSupport@allegion.com
· RFQ items must be ordered on a separate stand-alone purchase order and cannot be on an order with NON-RFQ items
For additional information, please contact Technical Product Support at 877-671-7011.
Price Book 6
Effective July 9, 2018 7
How to Use the Price Book
Commercial Master Keyed Orders
In an effort to expedite the process of managing our growing volume of Master Keyed order requests, Master Keyed orders submitted
in the following choice of formats will receive factory lead times based on the following criteria:
• Orders submitted on the Key System Summary form (MS-I200) and the Master Keyed Order forms (MS-I100 and MS-I150)
OR
• Orders submitted on the Key System Summary form (MS-I200) and your purchase order with information specified in the
following sequence:
Lead times for Master Keyed orders in any other format will be extended at least 5 additional working days. In all cases, allow addi-
tional lead time for clarifications and complex keying requirements. The Master Keyed order forms are located in the
Forms & Examples/Keys and Keying sections of the price book. For your convenience you can download the Master Keyed order forms
from our web site at allegion.com/us
Residential Keying
Residential Master Key (RMK): RMK is a single key that will grant access to all opening with in the facility (i.e. master key).
Additionally, each tenant would need to be provided with a key that will grant them access to their apartment only. The same keying
situation would exist in any form of a multi family housing complex.
Residential Construction Keying (RCK): RCK (also referred to as loss ball) by design allows the use of a temporary master key during
the construction phase of a project. At the end of the construction phase, the use of the homeowner key will trigger the lost ball con-
struction device, thus eliminating the temporary master key used during construction.
Qty Product Design Finish Hand Latch Strike Add’l Details
Door Detail Information DHI Key Symbol
MASTER KEYED ORDERS
Schlage Forms (MS-I200, MS-I100, MS-I150)
Non-Schlage Forms
LEAD TIMES
Factory Lead Time
Extended Lead Time Additional 5 Working
Days Minimum
8
Price Book 6
Effective July 9, 2018
Notes
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
16. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $16.40 per cylinder.
17. Cut keys ordered with locks are priced according to appropriate extra cut key charge listed on page Keys-26
18. Grand master sections L, LP (Primus) and Y are supplied in stainless steel only and are recommended to be cut at the factory only
18. Stamping standards and charges are listed on page Keys-18
20. Keying services and associated charges are listed on page Keys-22
21. All Primus 1+ key orders must contain the locksmith ID
22. All restricted key orders are subject to the restricted keyway sales policies are listed in Terms & Conditions
23. For hotel function cylinders: Not available in Primus. Furnished 0-bitted. Emergency keys must be ordered separately.
24. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
9
Price Book 6
Effective July 9, 2018
Terms-1
TERMS & CONDITIONS
Introduction
Table of Contents
General Terms and Conditions
for Sales and Service Terms-2
Standard Schlage Product
Terms and Conditions Terms-6
Product Warranties Terms-9
Commercial Applications ..................Terms-9
Distributor Function and Location Policy Terms-10
Cylinder Policies Terms-11
Schlage Key Systems ......................Terms-11
Restricted Keyway Policy ................. Terms-12
Construction Core Program Policy ........Terms-13
Primus® Sales Policy .....................Terms-13
Master Key Shipment Policy Terms-15
Hardware Finishes Terms-16
How To Order Forms and Examples
Price Book 6
Effective July 9, 2018
10
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
TERMS & CONDITIONS
Terms-2
1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by
which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order”
or “order” for the purposes of this Agreement include the term “request for quotation,” as
appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions
set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s
purchase order will in any way incorporate different or additional terms and conditions, all
of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF
CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S
ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN
THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part,
for any reason.
2. ORDERS.
a. Order Processing. When Customer wishes to place an order for Deliverables, it will
deliver to Company a purchase order. All such purchase orders must (i) be in a written format
acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include
Customer’s account number, invoice address, ship to address, shipping method, shipper’s
letter of instruction for international shipments, part number, pricing, and designated contact
information, (v) include, if applicable, any special configuration ID numbers, necessary
programming information, special factory instructions, and requested specifications regarding
a particular finish, handing, design, backset, or strike, (vi) reference any applicable pricing
discounts under an ongoing buying program or based on a written quote from Company,
along with the applicable buying program number or quotation number, and (vii) not combine
buying program and quoted product on the same order.
b. Minimum Orders. In the event the order value does not meet any required minimum
net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items
in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum
order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of
a requirement for one order shall not constitute a waiver of the requirement for any future
orders.
c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt
of each purchase order issued in accordance with this Agreement, and (ii) notify Customer
whether Company accepts or rejects the purchase order. If Company fails to accept or reject
a purchase order within a reasonable time period, such failure to respond will be deemed a
rejection of the entire order.
Orders that combine buying program and quoted product on the
same order will be routed back to your local SSC office in order to review subject purchase order.
d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding
order changes and cancellations are available on the Allegion customer website, WHICH
TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise
provided herein, Customer acknowledges that (i) requesting a Change Order may cause
a delay in the scheduled shipment date, a longer lead time or result in a new scheduled
shipment date; (ii) Orders may not be changed after 48 hours of Company’s order
acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes
to an accepted purchase order will be subject to a Change Order charge of 25% of the net
Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred
prior to the receipt of the Change Order from Customer, or that may be required due to the
Change Order; (iv) the requested change may result in additional charges for labor, fabrication,
and raw material, and (v) if Customer cancels an order or portion of an order that includes
Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee
will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential
orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard
items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE),
credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a
cancellation charge of 100% of the acknowledged price.
e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as
separate stand-alone orders and must qualify for all terms of sale, including discounts, on an
individual basis.
f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast
Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested
by Customer within 24 hours of Company’s order acknowledgment if the order has not
shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by
Customer if the order has not shipped and if the request is made to Company within 48 hours
of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables
must be processed through Fast Track Customer Service.
g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without
penalty only if made within 48 hours of Company’s order acknowledgment, and provided that
the order has not shipped. Some exceptions do apply – please consult the factory. Changes
are not allowed on Rapid Program orders after the order has been entered and acknowledged.
After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject
to a charge of 25% of the order. Unless otherwise specified by Company in writing, any
changes to orders acknowledged by Company that affect the delivery date will be deemed
a new order and will require acknowledgement by Company as provided in this Section.
Additional products, features, terms and conditions regarding the Rapid Program are available
on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED
HEREIN BY REFERENCE.
3. PRICES, INVOICES AND PAYMENT.
a. Prices. The prices in Company’s Price Book are subject to change at any time, without
notice to Customer. Company may charge Customer additional amounts if Customer requests
special packing, marking, shipment, product modification, or engineering services. Oral prices
specified by Company are null and void. Quote numbers must be referenced on Customer’s
purchase order in order for the Company’s quoted pricing to apply. Orders that do not
reference a quote number will receive buy program pricing or book net pricing. Quoted prices
are for those specific products quoted for a specified job, and are subject to the Price Book in
effect at the time Company receives the order.
b. Taxes. Prices do not include any present or future federal, state or local property, license,
privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result
from transactions or any services performed in connection therewith. Any taxes, charges,
or duties imposed by any governmental authority on the sale of Deliverables will be paid by
Customer, in addition to the selling price specified by Company.
c. Payment Terms. Company will deliver to Customer an invoice with each shipment of
Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice
date (subject to any early pay discounts that may be offered to Customer by Company in
its sole discretion). Customer will make all payments in United States dollars. Past due
invoices will be subject to a late payment service charge of 1.5% per month on any overdue
unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law,
whichever is less. Customer shall reimburse Company for all costs of collection, including,
without limitation, reasonable attorneys' fees, for any overdue amount owed by Customer to
Company, and such collection costs shall also be subject to interest charges.
4. QUOTATIONS.
a. Project Quotations. Project or new construction quotes are restricted to the specific
project quoted for the quantities, finishes, and series of Deliverables referenced on the quote.
Company reserves the right to require proof of sale of Company products for any quoted
project.
b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the
following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or
ii) Sale to a general contractor or installer for new construction. Stock quotations may not be
used for any project containing any Company no-substitution, specified products. Deliverables
purchased under Stock Quotations cannot be redistributed to other Customer branch locations
or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold
over the counter to any walk in trade.
c. General. All quotes are subject to this Agreement, unless otherwise specified by
Company, and are subject to change at any time prior to Company’s acceptance of a purchase
order referencing the applicable quote number. Company, its representatives and employees
reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request
to quote a price other than the standard list price, regardless of whether Company or its
representatives or employees have previously quoted discounted prices to the Customer on
some or all of its orders. Customer’s failure to comply with this Section 4 will be considered
a material breach of this Agreement, and will entitle Company to immediately terminate any
purchase orders and/or Customer’s ability to distribute Company’s products.
5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase
money security interest and lien on any and all of Customer’s rights, title and interest in
each Deliverable sold by Company to Customer, wherever located, until the invoice for the
applicable Deliverable(s) is paid in full, including any late charges and costs of collection.
Customer authorizes Company to, and will assist Company in, taking all necessary steps to
perfect and maintain Company’s interest in such Deliverables.
6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its
purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”)
set forth in Company’s credit application, which Credit Terms Customer acknowledges are
subject to change by Company at any time. Company reserves the right to request payment in
advance of shipment or any order or to request adequate assurances for Customer’s payment
of an order and may withhold or stop shipment, without any liability to Company, until
Customer submits payment or adequate assurance of payment.
7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company
products in support of Company-written specifications and will maintain sufficient inventory
to adequately support End Users, installers, and/or general contractors’ needs. Company may
implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure
to comply with such program(s) will be considered a material breach of this Agreement,
and will entitle Company to immediately terminate any purchase order and/or Customer’s
ability to distribute Company’s products. Customer shall, at its own expense, gain and
maintain sufficient knowledge of the industry and products competitive with Deliverables so
as to be able to (a) explain in detail to End Users, installers, and/or general contractors the
differences between the Deliverables and competing products, (b) ensure that an adequate
number of trained, capable and qualified technical personnel with sufficient knowledge of the
Deliverables and who have obtained all necessary licenses and permits are available to assist
End Users, installers, and/or general contractors, and (c) respond to such End Users, installers,
and/or general contractors with respect to the general operation and use of the Deliverables
including, but not limited to, (1) acting as a liaison between the End Users, installers and/or
general contractors and Company in matters requiring Company participation, (2) providing
general product information and configuration support on standard protocols and features,
(3) collecting relevant technical problem identification information, and (4) posting and
distributing any warranty information concerning the Products in accordance with Company’s
instructions. Customer is responsible for all service and support resulting from the re-sale
of any Deliverable to End-Users, installers and/or general contractors, examples of which
may include, but are not limited to, support activities such as installation, initialization,
software set-up, training, trouble-shooting, technical support and field service. In the event
Customer is unwilling or unable to perform said support activities, Company reserves the right
to recover from Customer any and all expenses incurred by Company to resolve the afore-
mentioned End-User, installer and/or general contractor issues. Technical product training is
recommended for Customer in order to fully service and support Deliverables purchased from
Company that are resold to End-Users, installers and/or general contractors.
8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase
order or other contract with Company, Company shall have the right, in addition to all other
legal remedies and without prejudice to any of its right hereunder, to defer further shipments
under that or any other purchase order until such default is corrected and to declare all
outstanding bills of Customer to be immediately due and payable.
9. INSPECTION AND DELIVERY.
a. Inspection. Customer will inspect all Deliverables immediately after receiving them.
Customer will be deemed to have accepted the Deliverables unless Customer notifies
Company in writing of any nonconformance within 10 days of delivery and provides Company
written evidence reasonably documenting that nonconformance. Inspection of Deliverables at
Company’s facility is not permitted.
b. Delivery. Delivery schedules for Deliverables are based upon current production
capacities, material or component availability, and inventory, and may be changed by
Company as conditions require. Delivery schedules for services are based upon Company’s
prompt receipt of, and prompt access to, Customer’s equipment and all information necessary
to complete the services. In no event will any delivery date be construed as falling within the
meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid
for at the price and on the terms stated herein. Any partial delivery shall constitute a separate
sale, and payment shall be separately made when due. If any part of a delivery hereunder is
not delivered by Company in accordance with Customer’s purchase order, this Agreement shall
not be affected thereby.
10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer
is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB
Origin, Company’s factory”; and (ii) where the Customer is located outside of the United
Allegion General Terms and Conditions of Sale and Service
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
11
TERMS & CONDITIONS
Terms-3
States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In
either instance, title and risk of loss will pass to Customer upon delivery to the carrier at
Company’s factory, provided, however, as set forth herein, Company shall retain a security
interest in the Deliverables until full payment has been made therefore, and Customer
agrees, upon request, to do all things and acts necessary to protect Company’s interest by
adequately insuring the Deliverables against loss or damage from any cause and to have
Company named as an additional insured. Customer will promptly provide Company with a
copy of the relevant certificate of insurance upon Company’s request.
11. SHIPPING.
a. Freight Charges. Company will ship all Deliverables in accordance with Company’s
freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping
Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.
b. Rush Charges. Expedited order options are available as set forth in Company’s Freight
Shipping Guidelines.
c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its
standard procedures for shipment, unless the parties agree, in writing, that Company will
comply with any special instructions provided by Customer. Special instructions may result
in an increased price.
d. International Shipments. For all international orders, a Shipper’s letter of instruction
must be submitted in writing with the order. Failure to do so will result in the order being
rejected. Complete adherence to this order requirement will be strictly enforced. Company
will not be held liable for any charges resulting from delays due to lack of complete required
information being supplied.
e. Once received by the Company, a purchase order cannot be combined with any other
order to increase average order size as it relates to Company’s Freight Shipping Guidelines.
However, for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available
for Schlage, Von Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day
Program (available for Ives products); or ProExpress (available for specific product lines
stated in the ProExpress price book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von
Duprin products), the applicable brands or product categories may, subject to certain order
requirements identified by Company, be combined on a single order to increase average
order size used in Company’s Freight Shipping Guidelines.
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims
for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims
regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days
from the date of delivery; (iii) All claims for damage to Deliverables (while in the care,
custody, and control of Company) must be submitted within thirty (30) days from the date
of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/
or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the
parties.
13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision,
and accordingly, Company reserves the right to change, without notice, the design of, or the
process of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable
in any manner contrary to the manner in which the Deliverable is intended to be used; and/
or (ii) not to modify the design of any Deliverable for use with another product without the
prior written consent of Company.
15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables
that are correctly furnished by Company per the purchase order may not be returned
unless Customer receives written authorization from Company. If returns are authorized
by Company, a return merchandise authorization (“RMA”) number must be provided by
Company. Deliverables identified under such RMA must be returned to Company within 90
days of issuance of the RMA. Such RMA number and any accompanying RMA documents,
the original invoice number, and a written explanation for the return must be included
with the returned Deliverables in order for Company to inspect and approve a credit for
the return. For warranty returns, a credit in the amount of the original purchase price
will only be issued if, after Company’s receipt and inspection of the returned Deliverables,
Company confirms, in its sole discretion, the defect is valid and approves the return. For
non-warranty returns/convenience returns, in the event Company approves such a
return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables
requested to be returned shall be a minimum of $250.00; (b) a credit will be made to
Customer’s account in the amount of the original purchase price less freight and a handling
charge of 45% of the net material on the original invoice; and (c) only Deliverables that are
new, current, standard, non-obsolete, non-specially manufactured, unused, in their original
condition as at the time of sale by Company to Customer, in their original packaging and in
Customer’s inventory less than 180 days from the date of shipment by the Company, and
not ordered as part of a master key solution may be considered by Company for return.
Such credit will only be issued if, after Company’s receipt and inspection of Deliverables,
Company approves the return. The amount of final credit will be determined upon receipt
at the factory and following Company’s inspection and analysis of the condition of the
returned material. Company retains the right to deny credit to anyone for any reason.
16. CONFIDENTIAL INFORMATION.
a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of
the Company except for the purpose of performing its obligations under this Agreement or
exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential
Information of the Company from disclosure and unauthorized use in the same manner that
it protects its own Confidential Information, but in no event shall such standard of care be
less than reasonable care. Customer may disclose Confidential Information of the Company
only to its employees who require such information for the Purpose and who are subject to
confidentiality obligations at least as protective as those set forth herein.
b. Proprietary Information and Advice. (a) All designs, data, and specifications provided
by Company are proprietary and may not be disclosed or reused by Customer without the
prior written consent of Company; (b) Company assumes no obligation or liability for any
advice given by Company, the results obtained, or damages incurred as a result of such
advice, and all such advice is given and accepted at Customer’s risk.
c. Return. Upon the termination or expiration of a purchase order or this Agreement
or upon the request of the Company, the Customer agrees to end all further use of, to
immediately return to the Company the original version of, and to delete or destroy all
copies of, any and all Confidential Information of the Company.
17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a)
use Company’s name in any form of publicity; or (b) use, create, register or market, directly
or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks,
or names that are now or may hereafter be owned by Company, as part of Customer’s
corporate or business name, as part of an internet domain name, uniform resource
locator (URL), or in any way connected with Customer’s business, trade address or other
designations. Upon termination of this Agreement or upon the request of company for any
reason, any use of Company’s trademarks or names will be immediately discontinued.
18. LIMITED WARRANTY.
COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN
COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY
ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”).
THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK
AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY
INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A
HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN
THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED
BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER
THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL
AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF
SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER
THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S
OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE
DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS
OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE
DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.
a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables
that: (A) are not the proper size for the application; (B) are not installed in accordance
with Company’s published installation instructions; (C) are installed with improper or
incorrect parts and/or are used for purposes for which they are not designed or intended;
(D) have been repaired or altered without the Company’s prior written consent; (E) have
been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored,
installed, maintained or operated; (G) have been used in violation of written instructions
provided by Company to Customer; (H) have been subjected to improper temperature,
humidity, or other environmental conditions, or (I) have been affected by normal wear
and tear. In addition, the provisions of this Limited Warranty do not apply to any defects
or issues with the design or performance of equipment or products not manufactured
by Company, nor does it apply to any code compliance or permit requirements for the
assembly, installation, erection or construction of any goods. Company is not responsible
for loss or damage resulting from use of Deliverables in conjunction with parts or systems
not manufactured by Company. Accessories or products furnished by the Company, but
manufactured by others, shall carry whatever warranty the manufacturers have conveyed
to the Company and which can be passed to Customer.
b. Services. Company warrants that its services will be free from defects in material
and workmanship for a period of 12 months from the date of completion of the particular
items of service. Company’s sole obligation under this service warranty is limited to repair
or reperformance, at its option of the service, provided however, if repair or reperformance
is either impractical or impossible, the Company will refund to Customer that portion
of the price paid to Company for any defective service, provided written notice of the
defect or nonconformance is provided by Customer within 30 days of discovery of the
nonconformance.
c. Notification. Customer agrees to immediately notify Company in writing if any claim is
made against Customer for any damages caused by any modules, parts, products, service or
other Deliverables which may be the direct result of any defect in the manufacture of such
aforementioned products. Customer agrees to cooperate with Company and its counsel in
the defense of such claim and Customer agrees not to settle such claim without Company’s
written consent. If Customer fails to notify Company of such claim or fails to cooperate in
such defense as aforesaid, then Company shall be discharged from any obligations under
this Section and shall have no further liability to Customer.
d. Exceptions. The following costs and expenses are not covered by the provisions of
these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables
or other manufacturer’s products; (ii) shipping and freight expenses required to return
Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition,
the provisions of this warranty are not applicable to anything other than defects in
Company’s material (products only) or workmanship.
19. LIMITATION OF REMEDIES.
CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT
OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)
SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR
OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE
PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT
WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE
DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY
(INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER
ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND
RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS
OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT
(INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT
NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE
OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS
ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS
OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING
FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE,
SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT
THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.
20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,
defend and hold Company, and its officers, directors, employees, customers, Affiliates,
suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against
any and all damages, claims, losses, expenses, costs, obligations, liabilities, including
without limiting the generality of the foregoing, liabilities for court costs and attorneys’
fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury,
death or loss to any person, or injury to any property (collectively, “Damages”), received
or sustained by any person(s) or property, arising out of, occasioned by, attributable or
Price Book 6
Effective July 9, 2018
12
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-4
TERMS & CONDITIONS
related to i) any breach of any representation or warranty made by Customer, its officers,
directors, employees, affiliates, users, agents, representatives or customers to Company or
any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/
or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by
any third party relating in any way to the obligations of Customer and/or the Deliverables
sold by Company to Customer hereunder. Customer shall not consummate any settlement
of any indemnified claim without the Indemnitees’ prior written consent. Customer’s
obligation to indemnify Indemnitees will continue in full force and effect notwithstanding
the termination or expiration of any order under this Agreement. In any claim against an
Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly
employed by any of them or anyone for whose acts they may be liable, the indemnification
obligations set forth in this Section shall not be limited in any way by or for Customer or any
subcontractor under any applicable worker’s compensation act, disability or other employee
benefit act, or insurance coverage. This provision shall survive termination of any order or
Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES,
CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING,
BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION,
LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS
OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON
OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION,
OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES
ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER
BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO,
STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or
warranty to the Customer that the Deliverables shall not infringe any intellectual property
rights including, without limitations, claims arising from patent, copyright, trademark, trade
secret, or other intellectual property infringement. Customer agrees to hold Company
harmless from and defend the Company against any such claim of intellectual property
infringement, including any Damages resulting from that claim, the cost of complying
with any preliminary or permanent injunction, and all other costs of defense (including the
attorneys’ fees and costs), in connection with the foregoing.
c) To the extent that applicable law does not permit any limitations set out in this
Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will
be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or
willful misconduct. The limitations of remedy and liability herein shall not be interpreted to
affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury,
or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this
Agreement. Further, the limitations of remedy and liability herein shall not be interpreted
to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for
contribution among joint tortfeasors in connection with a claim by a person who is not a party
to this Agreement.
21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI
standards are tested and performed by third-party independent laboratories. Any field
modification or alteration of certified Deliverables will void certification and Company is not
liable to Customer to certify any modified or altered Deliverable.
22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS
AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1)
YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
23. CONSUMER PRODUCTS
WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-
MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A)
SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU;
(B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED
TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C)
SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR LOCATION TO LOCATION.
24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its
obligations hereunder will be excused to the extent that it is caused by an event or occurrence
beyond Company’s control such as, by way of example and not by way of limitation, acts
of God, acts by any governmental authority (whether valid or invalid), governmental laws
and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural
disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts,
strikes, and slowdowns) at Company’s facility, its source plant or their suppliers, inability
to obtain power, material, labor equipment, or transportation, or court injunction or order.
The delivery date will be extended for a time equal to that of the delay and the schedule for
Company’s performance will be deemed adjusted to that effect.
25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the
attachments, exhibits, webpages, or supplements specifically referenced and incorporated
herein, constitute the entire agreement between Company and Customer with respect to
the matters contained herein and supersede all previous communications, representations,
or agreements, either oral or written between Company and Customer. No agreement or
understanding varying or expanding this Agreement will be binding upon either party unless it
is in writing and signed by a duly authorized representative of each party hereto.
26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any
agreement, or any part of an agreement or the various documents (including, but not
limited to, electronic documents) between Company and Customer, unless the parties
agree otherwise in writing, the various components of the agreements shall be given the
following precedence (in descending order of precedence): a) any master agreement or long
term agreement between Company and Customer; b) any specific terms, conditions and/
or warranties of the individual products or Deliverables; c) the terms and conditions of this
Agreement, and d) any purchase order.
27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.
Customer shall furnish Company with statements evidencing Customer’s financial condition
as Company may, from time to time, reasonably request, and shall notify Company
immediately of any and all events that may have a material adverse effect on Customer’s
business or financial condition. If Company determines, in its sole discretion, that Customer’s
financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to
Company’s other rights, Company may without liability or penalty, take any of the following
actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii)
cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to
Customer; or (iv) any combination of the above.
Company may immediately terminate an order from Customer by giving written notice to
Customer in the event of the happening of any of the following or any other comparable
event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the
Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an
assignment for the benefit of creditors by the Customer, all of which will allow Company to
demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to
trade; (vi) Company determines that Customer does not meet or no longer meets the credit
requirements of Company or Customer’s credit account is closed; (vii) any Customer violation
of law, specifically including, without limitation, those laws set forth in this Agreement.
In the event of termination in accordance with this section, Company will not be obligated
to accept any existing or additional orders from Customer and Company will be released
from its obligation to deliver under orders accepted prior to such termination. The rejection
or termination of any order by Company will not entitle Customer to any termination or
severance compensation, or to any payment in respect to any goodwill established by
Customer, or render Company liable for damages on account of the loss of prospective
profits, or on account of any loss, expenditure, investment or obligation incurred or made by
Customer.
No action taken under this Section 27 by Company (nor any failure of Company to act under
this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s
obligations, including the obligation of Customer to make payments as required under this
Agreement. Upon termination of any order, all amounts owed by Customer to Company will
become immediately due and payable, whether or not otherwise then due or payable.
28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit
risks with respect to, and for collecting payment for, all Deliverables sold to third parties
(including End Users, installers, and/or general contractors) whether or not Customer has
made full payment to Company for such Deliverables. The inability of Customer to collect
payment for any Deliverable shall not affect Customer’s obligation to pay Company for any
Deliverable.
29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this
Agreement shall be governed by and construed according to the laws of the State of Indiana
(excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations
Convention on the International Sale of Goods. Any disputes or claims shall be instituted
and maintained in the courts of the State of Indiana. Customer consents to the exercise of
jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any
action arising from or relating to this Agreement. Customer agrees to pay for all expenses
(including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by
Company in enforcing the obligations of Customer under this Agreement.
30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document
creates an employment, partnership, joint venture, or agency relationship between Company
and Customer, including that of franchisee/franchisor. No party will have any power or
authority to enter into any commitment on behalf of or otherwise bind the any other party
on any matter. No employee of Customer will be deemed to be an employee of Company.
If any provision of this Agreement is deemed to create a franchise relationship or business
opportunity between the Parties, then Company may terminate any purchase order or this
Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to
effect the original intent of the Parties as closely as possible in a mutually acceptable manner
in order that the transactions contemplated hereby are consummated as a reseller agreement
and not a franchise or business opportunity agreement.
31. SETOFF. Customer does not have the right to setoff or to back charge against any
amounts which become payable to Company under this Agreement or otherwise. Company
will not accept responsibility for backcharges for the cost of material or labor by Customer or
any third party.
32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties
expressly agree to electronic transactions and acknowledge that documents they sign
electronically will bind them to the same extent as a paper signature. Customer represents
and warrants to Company that only employees authorized to bind Customer legally shall
electronically sign any document under this Agreement. Customer shall comply with any
method of electronic communication/payment processing specified by Company, including
electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,
electronic signature, and electronic communication systems, including, without limitation, the
use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails,
even those containing a signature block of one of Company’s representatives, shall not
constitute a signed writing.
33. COMPLIANCE WITH APPLICABLE LAWS.
a. General. Company and Customer will comply with all applicable federal, state and
municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables,
including but not limited to full compliance with any applicable provisions of The Health
Insurance Portability and Accountability Act. Where the Customer is located outside the
United States, or where the customer intends to ship the product outside the United States,
the Customer shall be responsible for compliance with all U.S. export laws, and for filing all
U.S. Electronic Export Information, as applicable.
b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws
and regulations in performing its duties under this Agreement; (ii) it does not and shall not
engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws
or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not
pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value
(including but not limited to cash, gifts and entertainment) to (a) any government official
or employee of any government; (b) any official or employee of any department, agency, or
instrumentality of a government; (c) any employee of any corporation or entity owned or
controlled by a government; (d) any family member of such officials or employees; (e) any
political party, party official, or political candidate; or (f) any other persons, owners, officers,
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
13
Terms-5
TERMS & CONDITIONS
directors, employees and agents of any corporation or entity; to improperly or illegally assist
in obtaining or retaining business (including but not limited to any contracts, avoidance
of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain
regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase
of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the
Company’s Code of Conduct for Business Partners as set forth on the Allegion customer
website, WHICH IS HEREBY INCORPORATED BY REFERENCE.
c. The Customer shall indemnify and hold the Company harmless from any claim, demand,
expense or cost arising from any breach of this Article.
d. The Customer shall permit the Company to conduct an audit or review of the Customer’s
financial books and records and business operations at such other times that the Company
considers it necessary to confirm compliance with this provision. Such audit may be
conducted by representatives of the Company or, at the Company’s sole discretion, by a
certified public accounting firm selected by the Company. The Customer shall cooperate with
any inquiries from the Company’s Ethics & Compliance Group.
e. A violation of this provision constitutes a material breach of this Agreement and the
Company may terminate any purchase order or this Agreement immediately, with no
opportunity to cure, in accordance with Section 27 of this Agreement.
f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible
for obtaining or maintaining any permits for the performance of services or the verification
or compliance with any code requirements relative to the performance of services, (ii) to the
extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S.
Government, Company’s obligations under this Agreement are conditioned upon the grant of
such approval and upon compliance by Customer with any restrictions imposed by the U.S.
Government in connection with such approval, and (iii) in the event the Deliverables are to
be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or
governmental indemnity protecting Company against liability. The Customer hereby releases
and agrees to indemnify Company and its suppliers for any nuclear damage including, but not
limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be
due, in whole or in part by Company or its suppliers.
g. No Inducements. Each party represents to each other that neither it nor any person
acting on its behalf has, in contravention of any applicable law, given or offered to give or will
give or offer to give, any sum of money or other material consideration to any person, directly
or indirectly, as an inducement to obtain business hereunder or to influence the granting
of licenses or other governmental permissions to enter into this Agreement or perform
obligations hereunder.
h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies
with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1
through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C.
§ 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING
PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as
amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR
§§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration
laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and
Executive Order 13496.
i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business
Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.
34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and
covenants to Company that: (a) it has the right, power, and authority to enter into this
Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and
to its respective Content and Marks for use within the scope of this Agreement, including
the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws,
rules, and regulations in effect that are applicable to its performance under this Agreement,
including obtaining all such approvals and/or permits as may be required hereunder.
35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely
based on the representations contained herein for its own purposes and not for the benefit of
any third party.
36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under
this Agreement shall be in writing and delivered in person, or sent by receipted courier,
express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party
for whom it is intended, at the addresses set forth in this Agreement. Either party may
change its address for notice by giving written notice to the other party. Any notice or other
communication shall be deemed given no later than the date actually received. Notice by
courier, express mail, certified mail, or registered mail shall be deemed given on the date it
is officially recorded as delivered and, in the absence of such record of delivery, it shall be
rebuttably presumed to have been delivered on the third Business Day after it was deposited.
Notices sent by e-mail require tangible confirmation of receipt from addressee.
37. ASSIGNMENT. Customer may not assign this Agreement without the prior written
consent of Company. Company may assign its rights and delegate its duties under this
Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the
event of a spin-off, merger, business combination, consolidation or sale of all, or substantially
all, of its assets or business that are related to this Agreement. The rights and duties in this
Agreement shall bind and inure to the benefit of any such assignee.
38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or
unenforceable under any statute, regulation, ordinance, executive order, or other rule of law,
that provision will be deemed severed to the extent necessary to comply with such statute,
regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties
will negotiate in good faith to arrive at an alternative arrangement approximating the original
business objective of the parties. The remaining terms and conditions of this Agreement will
remain in effect.
39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by
the other party of any provision of this Agreement will in no way affect the right to require
such performance at any time thereafter, nor will the waiver of either party of a breach of any
provision of this Agreement constitute a waiver of any succeeding breach of the same or any
other provision.
40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal
representative of the other party. Neither party is authorized to create any obligation on
behalf of the other party including, but not limited to, the obligation for payment of any
service or warranty obligation hereunder; (b) The rights and remedies herein reserved to
Company are cumulative and additional to any other rights and remedies provided at law or
equity; (c) The official text of this Agreement is in the English language. If this Agreement is
translated into another language, the English text will govern any question with respect to
interpretation; (d) The headings in this Agreement are for convenience of reference only and
do not affect the meaning of this Agreement in any manner.
DEFINITIONS.
Capitalized terms have the meanings set forth in this Section, or in the Section in which they
first appear in this Agreement.
“Agreement” means these Allegion Terms and Conditions of Sale and Service, together with
any applicable Country Supplement or Region Supplement provided by Company, and all of
the documents referenced herein or therein.
“Affiliate” means any Person that directly or indirectly, through one or more intermediaries,
controls, is controlled by, or is under common control with, the Company. The term
“control” (including the terms “controlled by” and “under common control with”) means
the possession, directly or indirectly, of the power to direct or cause the direction of the
management and policies of a Person, whether through the ownership of voting securities, by
contract or otherwise.
“Business Day” means any day except Saturday, Sunday or any other day on which
commercial banks located in the United States are authorized or required by Law to be closed
for business.
“Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling
products that are part of the Allegion product portfolio. Schlage Lock Company and/or its
subsidiary or affiliates will be severally but not jointly liable under the Agreement.
“Company Marks” refers to the Marks of Company.
“Confidential Information” shall mean any and all information provided by either party
to the other party pertaining to the disclosing party’s business. Confidential Information
shall include, but not be limited to, any bitting lists, formulae for products, manufacturing
processes, production techniques, packaging processes, methods, research materials, ideas,
marketing plans and related materials, quality standards, test results and data, apparatus,
engineering drawings, contract documents, computer software, hardware, or firmware,
business activities information such as financial information, reports, projections, books
and records, customer and supplier information, and operations, customer and supplier lists
and data, specifications, know how, and other Proprietary Information or Trade Secrets (as
defined herein) that either party may furnish to the other party. Confidential Information
shall not include information that: (a) is or becomes publicly known if such public knowledge
or disclosure is not the result of any act or failure to act on the part of the receiving party;
(b) is, at the time of disclosure, already known to the Receiving Party without utilizing the
Confidential Information; (c) is information disclosed to the Receiving Party by a third party
which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty
of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving
Party without the use of Confidential Information. The Receiving Party shall have the burden
of proof as to prior knowledge and absence of breach. Confidential Information may be
furnished in any tangible or intangible form including, but not limited to, writings, drawings,
computer and other electronic media, logic diagrams, component specifications, graphs,
prototypes, samples, or verbal communications and regardless of whether such information
is marked or designated as “confidential.” For the avoidance of doubt, all information,
knowledge or data disclosed by Company to Customer, regardless of whether disclosed in
written, tangible, oral, visual or other form, including, without limitation, sample products,
equipment, software, or other objects or material, provided by Company to Customer, and all
information, knowledge or data which was obtained by Customer from visits to Company’s
facilities, shall be considered “Confidential Information” under this Agreement.
“Content” means all information (including without limitation any text, music, sound,
photographs, video, graphics, data or software), in any medium, on a particular Company
Web page or Website or in Marketing Materials.
“Customer” means the purchaser of Deliverables from Company.
“Deliverables” means any good or service or both purchased by Customer from Company
under these General Terms and Conditions of Sale and Service.
“End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i)
its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution
or (ii) incorporation into its own products and (b) is an individual or entity, other than any
federal, state or local agency, office or division.
“IP” means all intellectual property and industrial property rights comprising or relating to/
of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not
Trademarks, registered by any authorized private registrar or Governmental Authority, web
addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and
design registrations, whether or not copyrightable, including copyrights and copyrightable
works, software and firmware, application programming interfaces, architecture, files, records,
schematics, data, data files, and databases and other specifications and documentation; (e)
Trade Secrets; and (f) all other intellectual property and industrial property rights, and all
rights, interests and protections that are associated with, equivalent or similar to, or required
for the exercise of, any of the foregoing, however arising, in each case whether registered or
unregistered and including all registrations and applications for, and renewals or extensions
of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in
any part of the world.
“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text,
call scripts or other material, whether in printed format, audio or audiovisual format, or in
any other format, that contain any (i) Content relating to the Company Deliverables or (ii)
Company Marks.
“Marks” means collectively the domain names, trademarks, trade names, service marks,
trade dress, logos, and the like used or provided by either party for use in connection with this
Agreement.
“Patents” means all patents (including all reissues, divisionals, provisionals, continuations
and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof),
patent applications, and other patent rights and any other Governmental Authority-issued
indicia of invention ownership (including inventor’s certificates, petty patents and patent
utility models).
“Person” means a person or entity.
“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable
being purchased by Customer.
“Trade Secrets” means and includes business or technical information of either party,
including processes, formulas, devices, techniques, compilations and other material that
a party attempts to maintain in secret and that derive commercial value for such party
from not being generally known to the public or readily ascertainable through independent
development or reverse engineering.
Price Book 6
Effective July 9, 2018
14
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-6
TERMS & CONDITIONS •
Standard Schlage Product Terms and Conditions
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
All prices may be subject to discount. Contact Customer Care for clarification.
Minimum Order Size for Channel Discount:
All orders less than $500.00 list shall be discounted at book net.
Commercial
The following specific product terms and conditions are applicable only to the extent provided herein. All other terms and conditions con-
tained in the General Terms and Conditions of Sale and Service provided in this Price Book will govern the sale of products
identified in this Price Book.
Under no circumstances is Schlage liable for incidental or consequential damages. Charge-backs will not be allowed.
Claims and Returns: Claims and Returns:
Due to Schlage error: Due to Customer error:
• Claims for shortages and/or incorrectly filled orders must be filed with
Customer Service within 30-days of receipt of material.
• Incorrect order acknowledgments must be changed by emailing request to
Customer Care territory email box upon receipt of acknowledgment.
Refer to inside cover of this book.
• Invoice adjustments must be faxed to Credit Adjustments @ (317) 810-3048
within 30-days of receipt of invoice.
• Returned goods will not be accepted without prior written approval from
Schlage. Credit will be based upon the Return Material Authorization (RMA)
issued by Customer Service or the
Allegion
Consultant and final acceptance by
Schlage. Returns must be prominently marked with the RMA number and fol-
low return guidelines on the RMA form.
• Product considered being defective after review by the
Allegion
Consultant
must be returned to the Schlage Lock Company facility in Security, Colorado
accompanied by an RMA. Replacement orders for defective product will be
entered by Customer Service at the time of notification.
• It is the policy of the Schlage Lock Company
to not accept returns of any materials that are
correctly furnished as per the dealer’s purchase
order.
• Return of product due to customer order error
or accommodation must be pre-arranged with
the
Allegion
Consultant and approved by
Business Unit Manager.
• Returns are subject to a minimum restocking
charge of 35% for unopened cases.
• Materials are not returnable.
• Product must be received in original factory
condition and certified as such by Schlage
Receiving.
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
15
Terms-7
Standard Schlage Product Terms and Conditions
• TERMS & CONDITIONS
Order Changes or Cancellations:
Type of Change
Type of Product
• Primus® Keys
Normal Factory
Lead Time items
6 Extended Factory
Lead Time items
1. Change to:
– Product, creating a
different SKU number
– Keying Not Accepted
• OK within first 2-days
from receipt of order.
• If after 2-days, item must
be deleted from order
(see 3, 25% handling
charge will apply) and
entered as a new order
(see 2).
• OK within first 10-days
from receipt of order.
• If after 10-days, item must
be deleted from order
(see 3, 50% handling
charge will apply) and
entered as a new order
(see 2).
2. Change to:
– Increase quantity of
existing item(s)
– Add new item(s) Not Accepted
• New order with normal lead-time must be generated for
additions. Same terms & conditions will be applied if
requested so long as the original order has not been shipped.
• Additions received after the original order ships must be
entered as a new order and will stand-alone for lead-time
and
terms & conditions.
3. Change to:
– Delete item(s)
– Reduce quantity of
existing item(s)
– Cancel order
Not Accepted
• OK within first 2-days
from receipt of order.
• If after 2-days, subject o
handling charge of 25% of
the net price of the deleted
item(s).**
• OK within first 10-days
from receipt of order.
• If after 10-days, subject o
handling charge of 50% of
the net price of the deleted
item(s).**
* Includes any change to key symbol, door identification and/or cylinder pinning.
** Handling charges are billed on the original order.
Notes: 1) Change orders must be emailed to your Customer Care territory email box. Please state change order request in subject
line. For questions call (877) 671-7011.
2) Customer Care will acknowledge receipt of change orders and action taken.
3) Change orders resulting in handling charges require customer review prior to change being made.
Commercial
All orders will be acknowledged with scheduled ship dates. Specific scheduled ship dates are not guaranteed by Schlage because of the
nature of product, labor, availability of product or manufacturing conditions that might be beyond our control. Schlage will not be liable for
back charges incurred based on availability of product in accordance with acknowledged ship dates. Selected Products are available to spe-
cific channels of distribution for 1 and 5-day delivery through the
Allegion
FastTrack Program. The
Allegion
FastTrack Program is subject to
separate terms and conditions.
Delivery: Claims and Returns:
For the following: Expect this delivery:
Non-Master Keyed orders Factory items will individually be assigned ship dates based on
current lead times.
Master Keyed orders
or
Non-Master Keyed orders prominently marked on the
order to “Ship Complete”
The entire order will be assigned ship dates grouped by
factory location. Items with longest current lead times determine
ship date for other items from that location.
Price Book 6
Effective July 9, 2018
16
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-8
TERMS & CONDITIONS •
Standard Schlage Product Terms and Conditions
The following specific product terms and conditions supersede the general terms and conditions of sale and service only to the extent provided
herein. All other terms and conditions contained in the General Terms and Conditions of Sale and Service provided in this price book will govern
the sale of products identified in this price book.
The price list in this price book supersedes and cancels all previous price lists contained in any other price books or versions
thereafter. Prices shown are subject to change without notice. All prices are subject to discount. Contact customer service
for clarification.
Service Charges:
Service charges on past due invoices (except validly disputed items) will be assessed as follows: 1 1/2% per month or the maximum allowable
by law on past due amounts open as of the last day of each calendar month until the past due amounts are paid.
Changes or Cancellations:
Changes or cancellations to an order must be in writing and may result in additional charges for labor and/or materials. Changes may result in a
delay in the scheduled ship date. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, includ-
ing discounts, on an individual basis. Changes or deletions resulting in an order size of less than our minimum will not be accepted. Orders for
non-cataloged, special or nonstandard items may not be canceled. Factory orders may not be changed within 7 days.
Claims and Returns:
Claims for shortages and/or incorrectly filled orders must be filed with Customer Service within 10 days of receipt of material.
Price adjustments must also be made in writing to Customer Service within 30 days from receipt of invoice. No returned goods will be accepted
without written approval from Schlage. Credit will be based upon the written authorization of the Schlage representative and final acceptance
by Schlage. Such returns must be prominently marked with the return goods authorization number and shipped prepaid. Returns, if approved,
will be subject to a minimum restocking charge of 35% for unopened cases received in the same condition as when sold by Schlage. Materials
are not returnable. Charge-backs will not be allowed.
Taxes:
Prices do not include any present or future Federal, State or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or
assessments which may result from transactions or any services performed in connection therewith.
Delivery:
Orders will be assigned ship dates and acknowledged accordingly, based on estimates of availability of products. Specific scheduled ship dates
are not guaranteed by Schlage because of the nature of product, labor, availability of material or manufacturing conditions that might be
beyond our control. Schlage will not be liable for back charges incurred based on availability of product in accordance with acknowledged ship
dates.
Certifications:
Schlage products, as noted in our catalog, are produced and tested by independent laboratories for compliance with UL and ANSI standards.
Any field modification or alteration of product will void certification.
Copyright 2014, Allegion
All rights reserved. Printed in U.S.A.
Residential
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
17
Terms-9
TERMS & CONDITIONS •
Standard Schlage Product Terms and Conditions
Product Warranties: Commercial Applications
3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty
Schlage Lock Company, LLC (the “Company”) extends a three year limited mechanical warranty and one year limited electromechanical warranty to the original user of the
products manufactured by the Company (the “Products”) against defects in material and workmanship from the date of purchase. Certain Products
contain restrictions to this limited warranty, additional warranties, or different warranty periods. Please see below for specific Product warranty information.
What The Company Will Do: Upon return of the defective Product to the Company or its authorized distributor for inspection, free and clear of all liens and encumbrances
and accompanied by the statement of defects of proof of purchase, the Company will replace the Product.
Original User: These warranties only apply to the Original User of Products. These warranties are not transferable.
What Is Not Covered: The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not limited
to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the Company; or (iii) any other incidental,
consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to strict
liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.
The provisions of these limited warranties do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have
been subjected to alteration, misuse, abuse, negligence, or accident; (iii) which have been improperly stored, installed, maintained, repaired or
operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature,
humidity, or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not disclose to the Company’s
satisfaction non-conformance to the warranties. Additionally, the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in
educational facilities and student housing.
Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximum
liability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by the Company
may be brought by the Original User more than one (1) year after the cause of action has arisen.
How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state.
SPECIFIC PRODUCT WARRANTY RESTRICTIONS/ADDITIONAL WARRANTIES:
ND-Series Levers 10-Year Mechanical Warranty
The limited warranty is for a period of seven (7) years for products shipped prior to January 2012. 10-year for products shipped after January 2012.
Small Format Interchangeable Core (SFIC) Warranty
The limited warranty also applies to Schlage locks and housings when used with another manufacturer’s cores, or to Schlage cores (i.e, SFIC) when used in another manu-
facturer’s locks and housings. The use of unauthorized cylinder cams or other components with the Products shall void these warranties.
Everest 29, Everest 29 Primus, Everest 29 Primus XP, Everest, Everest Primus, and Everest Primus XP Limited Lifetime Key Breakage Warranty
A limited lifetime warranty is provided to the original user against breakage and is subject to the restrictions of these limited warranties.
Portable Security Limited Lifetime Warranty
A limited lifetime warranty is provided to the original user and is subject to the restrictions of these limited warranties.
Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus,
finish discoloration is not applicable to the above warranty.
Product Warranties: Residential Applications
Lifetime Limited Mechanical & Finish Warranty and 1-Year Limited Electronics Warranty
Subject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and finish warranty and a one-year limited electronics
warranty to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as the Original User
occupies the residential premises upon which the Product was originally installed.
What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the origi-
nal purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable.
What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not
limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other
incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or
negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion or limitation may not apply to you.
The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which
they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed,
maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature,
humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction non-conformance to the warranty.
Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals.
Exclusions: Oil Rubbed Bronze finish (613) is designed to improve over time and change in appearance, creating a living finish through daily use and thus,
finish discoloration is not applicable to the above warranty. Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connec-
tion with the Product. Schlage’s maximum liability here under is limited to the original purchase price of the Product. No action arising out of any claimed breach of this
warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen.
How local law applies: This warranty gives you specific legal rights, and you may also have other rights as otherwise permitted by law. If this Product is
considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied
warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specific rights under this warranty.
Complete Locks • TERMS & CONDITIONS
Price Book 6
Effective July 9, 2018
18
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Product Warranties, Additional Terms & Conditions: Commercial and
Residential Applications
Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximum
liability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by the Company may be
brought by the Original User more than one (1) year after the cause of action has arisen.
How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state.
Note: Should the Product be considered a consumer product as may be covered by the Magnusson Moss Federal Warranty Act, please be advised that:
(1) Some states do not allow limitations or incidental consequential damages or how long an implied warranty lasts so that the above limitations
may not fully apply; and (2) This warranty gives specific legal rights and a user may have other rights which may vary from state to state.
For warranty service and shipping instructions contact:
Lifetime Mechanical Warranty and 5-year Finish Warranty
Subject to the terms and conditions of this warranty, Schlage Lock Company (“Schlage”) extends a lifetime limited mechanical and 5-year finish warranty to the
original consumer user (“Original User”) of Schlage J Series products (“Product”) against defects in material and workmanship, as long as the Original User occupies
the residential premises upon which the Product was originally installed.
What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the
original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable.
What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited Warranty: (i) labor costs including, but not
limited to, such costs as the removal and reinstallation of Product; (in) shipping and freight expenses required to return Product to Schlage; and (iii) any other
incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or
negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion or limitation may not apply to you.
The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for
which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored,
installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper tem-
perature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction non-conformance to
the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals.
TERMS & CONDITIONS • Product Warranties and Distribution Policy
Schlage and Portable Security
Commercial Customers
Schlage
Customer Care
3899 Hancock Expressway
Colorado Springs, CO 80911
(877) 671-7011
Fax (800) 452-0665
Schlage and Portable Security
Residential and Retail Customers
Schlage
Customer Care
2119 East Kansas City Road
Olathe, KS 66061
(800) 847-1864 (option 1) Consumer
Fax (800) 366-5625
The Schlage Lock Company reserves the right to make changes in designs and specifications or to make additions or improvements on its
products without notice and without incurring any obligation to incorporate them on products previously manufactured. The Schlage Lock Company is
not responsible for any modification, addition or alteration to our products by others.
Distribution Function and Location Policy
The Schlage customer relationship includes the nonexclusive area of primary sales responsibility and the channel of distribution assigned by Schlage. It is
vital to our success and for the effective management of the distribution of our products that the Schlage customer relationship, once it is satisfactorily
established between us, should not be changed without our approval. Therefore, after selection by Schlage as a distributor of one or more of Schlage
products, a customer should continue to perform that distribution function from the location of its business at the place or places utilized at the time of
selection. A customer should not change its Schlage distribution function or establish a different or additional location without the prior written consent
of Schlage.
Schlage reserves the right to discontinue, after appropriate notice, sale of its products to any customer which refuses to adhere to
this policy. Schlage also reserves the right to change, in its sole discretion, the number and locations of the distributors authorized
to distribute its products in any area. This determination will be based upon, among other considerations, the success or failure in developing the market
for Schlage products.
Product Warranties: Residential Applications (Cont.)
Guaranteed Fit Program: Schlage products are designed to fit standard residential door preparations and retrofit existing tubular locks. Note: Mortise locks and
preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product’s perfor-
mance, the Original User may simply contact Schlage Customer Service at 888-805-9837 in the U.S. and Canada or 800-506-7866 in Mexico for assistance.
Program and warranty claims: If you encounter a residential door preparation or fit issue under the Guaranteed Fit Program or have a claim under this
warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage.
Terms-10
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
19
Schlage Key Systems Sales Policy • TERMS & CONDITIONS
Terms-11
Schlage Key Systems Sales Policy
Definition-
Standard keyways are C, CE, E, EF, F, FG, G, H, J, K, L. All other keyways are considered restricted.
Everest, Everest Primus, Classic Primus and all other restricted keyway products (Quad, Reversed, Numbered) manufactured by the Schlage
Lock Company are offered for sale by policies set forth per product type and security levels through specific channels of distribution. Possession
of this price book or any other Schlage price book does not constitute “the right to purchase” these products. Please refer to the sales policy
below for terms and condition. The term keyway(s) refer(s) to keyway, key sections or side bit milling.
Standard Classic (Obverse) Key Sections- no restriction
Standard keyways are Classic (Obverse) C, CE, E, EF, F, FG, G, H, J, K, L.
Everest and Everest 29 Open (C and S Key Sections)
Everest and Everest 29 Open (C & S keyways) include non-Primus products with Everest C and Everest 29 S keyways and key sections. Schlage
only sells Everest and Everest 29 Open products to commercial security professionals. Commercial security professionals purchasing Everest and
Everest 29 Open products from Schlage are permitted to stock and to originate or duplicate keys without signature verification.
Purchasers of Everest and Everest 29 open (C & S) are permitted to resell the products in accordance with their distribution agreement to end
users and to other commercial security dealers who have a professional locksmith on staff but are expressly prohibited from selling to:
i) Any residential retail outlet.
ii) Any individual or entity purchasing or selling products through any method of auction.
End User Keyways - Primus / Primus XP levels 3, 4 & 9, Everest D, Everest B, Everest 29 T, Everest 29 R, Quad, Reversed,
Numbered.
End user restricted keyways are manufactured and sold by Schlage for use within the end user facilities only and are not for dealer or lock-
smith’s use or distribution. The facilities are described as the “ship-to” address pre-authorized by the end user via a letter of authorization (LOA)
or face sheet (depending upon the key system type).
End user keyway products may be stocked at the end user location only, unless authorized otherwise in writing by the end user. Every new end
user system, using these restricted keyways, requires prior approval from the local SSC sales office management.
Restricted end user keyways may not be sold to any contract hardware dealer or wholesale distributor not open as a direct Schlage account as
the time of the sale, unless authorization has been granted in writing by the local SSC sales office management where the end user reside.
Locksmiths/ dealers’ keyways - Primus/ Primus XP levels 1, 1+, 2, 7, 8, Everest B234 & B235, Everest 29 R234 & R235.
Locksmith/ dealer key section can be sold to commercial locksmiths/ dealers only.
Right to stock and sell locksmiths/ dealers restricted keyways requires the appropriate written agreement with Schlage and approval by the
local SSC sale office management. Please contact your local SSC sale office for a copy of these contracts and additional information.
Schlage hereby reserves the right to terminate or take any other legal action against any party that violates this policy.
Price Book 6
Effective July 9, 2018
20
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-12
TERMS & CONDITIONS • Restricted Keyway Policy
Restricted Keyway Policy
Everest B, Everest 29 R
All Everest and Everest 29 SFIC (B and R Families) keyways are restricted.
When ordering a new keying system, include the following:
• Job (end-user) name, city, state and zip code.
• Letter of Authorization (LOA) – Authorized ship-to address for key blanks, cores and cut keys on end-user’s official stationery.
See Forms & Examples for sample letter of authorization.
• Numerically defined specifications for expansion of all branches of the key system.
The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to an
existing keying system, include the following:
• Job (end-user) name, city, state and zip code.
• Facility code previously assigned by Schlage and stamped on all existing keys and blanks.
• Registry number of the keying system as established by Schlage.
• Letter of authorization on end-user’s official stationery is required when:
- End-user places order with new dealer.
- Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.
See Forms & Examples for sample letter of authorization.
Bitting list (transcript) orders require a letter of authorization on the end-user’s official stationery. Prevailing prices apply.
Everest D, Everest 29 T
All Everest D and Everest 29 T keyways are restricted.
When ordering a new keying system, include the following:
• Job (end-user) name, city, state and zip code.
• Letter of Authorization (LOA) – Authorized ship-to address for all products on end-user’s official stationery. See Forms &
Examples for sample letter of authorization.
• Numerically defined specifications for expansion of all branches of the key system.
The factory will assign a “facility code” which will appear on all keys and blanks for this job. When ordering additions to an
existing keying system, include the following:
• Job (end-user) name, city, state and zip code.
• Facility code previously assigned by Schlage and stamped on all existing keys and blanks.
• Registry number of the keying system as established by Schlage.
• Letter of authorization on end-user’s official stationery is required when:
- End-user places order with new dealer.
- Order is to be drop shipped to a different ship-to address than originally authorized by the end-user.
See Forms & Examples for sample letter of authorization.
Quad, Numbered (“Paracentric”) and Reverse Keyway Family Policy
A letter of authorization from the end-user is required for all orders for restricted keyway plugs, 0-bitted and 1-bitted products and
all key blanks. Restricted keyway products are not available keyed random. The letter of authorization must include the address in
which the materials will be shipped. Keyway or keyway family must be referenced in the letter. Letters must be dated and signed by the end
user. Letters dated more than 6 months prior to the order submission date will not be accepted. Letters for projects that are ongoing may be
older than six months if effective dates are referenced in the letter. With the exception of the signature, all other information must be typed.
Allowable End User Authorizations for Restricted Keyways:
The end user can authorize a dealer or distributor to order and inventory products if they so choose. This authorization requires the
submission of a fully completed “Letter of Authorization” or “Signature Card”, depending on the product type requirements, by the end user
to Schlage.
Construction Core Program Policy
Full size and small format construction cores will be invoiced under standard payment terms. Credit for these cores, less the
handling charge, will be issued upon their return to the factory. Please contact customer service for return authorization. Customers may not
deduct payment for construction cores prior to completion of their authorized return.
Control Keys for Interchangeable Cores
A single control key will be added to orders containing interchangeable cores where a new masterkey system, master key system expan-
sions requiring a different control key and all construction core orders are placed and does not include a control key on the purchase order.
Construction core orders will include both a control and user key.
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
21
Terms-13
Cylinder Policies • TERMS & CONDITIONS
Primus®/ Primus XP Sales Policy
Primus High Security cylinder products manufactured by the Schlage Lock Company are offered for sale through specific channels of distribution, based on stocking
requirements and security levels. Possession of this price book or any other Schlage price book does not constitute “the right to purchase” Primus products.
Important: In stocking levels where purchase agreements are required, a fully executed purchase agreement, including initial minimum inventory order, must be in
place before any Primus products may be quoted or purchased. Contact your SSC Consultant for specific details.
The prices contained herein apply to Primus Levels 1 through 9 with respect to the actual product. Availability of product is subject
to additional conditions as follows:
PRIMUS/PRIMUS XP LEVEL 1: For retail locksmiths and Schlage dealers. Standard nationwide side bitting by keyway. Stocking level requires a separate
Primus/Primus XP agreement. Initial inventory commitment required for distributors but not for participating locksmiths. Obverse keyways only. HP, JP and
LP section keys are not available.
PRIMUS LEVEL 1 PLUS: For retail locksmiths. A side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale
distributor. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the wholesaler and the lock-
smith. Obverse keyways only. HP, JP and LP section keys are not available. Cylinders are always furnished less key blanks (LKB).
PRIMUS XP LEVEL 1 PLUS: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of the dealer physical location
zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial minimum inventory
purchase. Obverse keyways only. Cylinders can be ordered LKB, KD, KA or MK.
PRIMUS/PRIMUS XP LEVEL 2: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to
dealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an
initial minimum inventory purchase. Obverse keyways only.
PRIMUS/PRIMUS XP LEVEL 3: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within 2-digit zip code (Level 3G)
for orders of 60 - 1,999 Primus cylinders. Orders of fewer than 60 Primus cylinders are randomly assigned a side bitting from
a small nationwide pool of side bittings (Level 3U). Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways
only.
PRIMUS/PRIMUS XP LEVEL 4: End user level not stocked by dealers. Key systems are assigned a side bitting exclusive within a time zone (Level 4Z)
for orders of 2,000 - 3,999 Primus cylinders. A nationwide exclusive side biting (Level 4N) is assigned to key systems of 4,000 or more Primus cylinders.
This exclusivity can be purchased for a separate fee for smaller quantities of cylinders. This price book does not contain the fee schedule. Contact your SSC
Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Obverse and Quad keyways only.
PRIMUS LEVEL 7: For retail locksmiths. Side bitting is assigned on a nationwide exclusive basis to a specific Schlage wholesale distributor. Stocking level
which requires a separate Primus purchase agreement and an initial minimum inventory purchase by the Schlage wholesaler and the locksmith. Same as
Level 1 PLUS above, but with Everest S Family keyways only.
PRIMUS XP LEVEL 7: For retail locksmiths. An exclusive side bitting is assigned to dealer within the first three digits of of the dealer
physical location zip-code. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an initial
minimum inventory purchase. All Everest 29 key sections. Cylinders can be ordered MK, KA, KD or LKB.
PRIMUS/PRIMUS XP LEVEL 8: For Schlage dealers and large commercial locksmith businesses. Exclusive side bitting is assigned to
dealer by time zone. Distribution through direct Schlage dealers. Stocking level which requires a separate Primus purchase agreement and an
initial minimum inventory purchase. Equivalent to Level 2 above, but with Everest S Family keyways only.
PRIMUS/PRIMUS XP LEVEL 9: End user level not stocked by dealers. Key systems are assigned varying degrees of geographically
exclusive side bittings based on a sliding scale of purchase commitment or separate fees. This price book does not contain the fee schedule. Contact your
SSC Consultant for specific information. Distribution through Schlage dealers and Schlage wholesale distributors. Level 9U, 9G, 9Z, and 9N are equivalent to
Levels 3U, 3G, 4Z, and 4N above, but with Everest S and T Family keyways.
The following side bit milling exclusivity criteria apply to both levels 3, 4 & 9:
• 1- 60 cylinders-Random assignment
• 61-1999 cylinders-First two digits of zip-code
• 2000-3999 cylinders-Time-Zone Exclusivity (also available for $10,000 fee for an organization who
would like this exclusivity and doesn’t meet cylinders quantity requirement).
• 4000 + cylinders-Nation Wide Exclusivity.(also available for $40,000 fee for an organization who would
like this exclusivity and doesn’t meet cylinders quantity requirement).
Classic KeywaysEverest® Keyways
Important Ordering Information
See Forms & Examples: Primus and Everest 29 Primus Ordering Checklist for a checklist of information required to process a Primus order. Note that, for secu-
rity reasons, all end user Primus levels (Level 3, 4 and 9) require a Facesheet (MS-E120) bearing an original signature. Opening orders for end user Primus levels
also require a Signature Card (MS-E130) bearing original signatures. Facesheets and signature cards are used to authenticate the end user request for product,
therefore orders received without the correct supporting documents (or without original signatures) are subject to delays or cancellations. Blank Facesheets
and Signature Cards are included in the Forms & Examples section of this price book for your reference. Additionally, electronic version of these forms are avail-
able at allegion.com/us.
The Schlage Lock Company reserves the right to make changes in designs and specifications, to make additions or improvements on its products, or to discon-
tinue products without incurring any obligation. The Schlage Lock Company is not responsible for any modification, addition, or alteration to our products by
others.
Inventory commitment Requirements-Commercial Locksmiths Levels
Primus XP Everest 29 Primus XP
Level 1 None N/A N/A
Level 1+ $7,500 Level 7 XP $7,500
Level 2 25,000 Level 8 $25,000
Price Book 6
Effective July 9, 2018
22
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-14
1
LEVEL
1
+
LEVEL
2
LEVEL
3
LEVEL
4
LEVEL
7
LEVEL
8
LEVEL
9
LEVEL
• Strip Mall Shops
•
•
Small Businesses
• Upscale Homes
• Small Businesses
Restaurants
• Doctor's Offices
• Office Buildings
• Banks
• Private Schools
• Healthcare Residences
•
•
•
•
Educational Facilities
Healthcare Facilities
Large Office Complexes
Government Buildings
• Detention Centers
• Franchises
T ypical Applications
National Non-Exclusive
Stocked by distributors and resold to
end users via commercial locksmiths;
All Level 1 Locksmiths have the same
side bittings.
Dealer Exclusive
Owned and stocked by dealers then
resold to end users. Keys bear a unique
ID based upon time-zone exclusivity of
side-bitting.
End User Exclusive
Exclusivity is based on either random
assignment, on the first 2 digits of the
zip code, on time zone, or on a
nationwide basis, depending on end
user commitment.
Dealer Exclusive
Owned and stocked by dealers then
resold to end users. Keys bear a unique
ID based upon time-zone exclusivity of
side-bitting.
End User Exclusive
Exclusivity is based on either random
assignment or on the first 2 digits of the
zip code, depending on end user
commitment.
End User Exclusive
Exclusivity is based on either a time
zone or nationwide basis, depending on
end user commitment.
Consider Everest Open for
Commercial Exclusivity
Dealer Controlled SystemsEnd User Exclusive
Dealer Controlled SystemsEnd User Exclusive
XP Dealer
Exclusive
Owned and
stocked by
dealers then
resold to end
users. Keys bear
unique ID based
upon three digits
zip-code
exclusivity of side
bitting.
Primus
Wholesaler/
Locksmith
Exclusive
Locksmiths resell
wholesaaler’s side
bitting to end
users; keys bear
locksmith ID
number.
XP Dealer
Exclusive
Owned and
stocked by
dealers then
resold to end
users. Keys bear
unique ID based
upon three digits
zip-code
exclusivity of side
bitting.
Primus
Wholesaler/
Locksmith
Exclusive
Locksmiths resell
wholesaaler’s side
bitting to end
users; keys bear
locksmith ID
number.
R
R
TERMS & CONDITIONS • Cylinder Policies
Electronic Validation from Schlage
Electronic Validation (e-validation) is an online system for the use of the end user to create electronic authorizations replacing the
letter of authorization (LOA) and Primus Facesheet processes. This online validation system is designed to ease the burden of an end
user providing authorizations for ordering restricted key and cylinder products on their behalf. Through this system, the end user can regis-
ter for an online account with Schlage that will allow them to manage their shipping addresses, shipping contacts and additional autho-
rized users for their restricted products. Through this system, they can then generate an electronic Facesheet that they can provide to the
distributor of their choice to allow an order for restricted products to proceed. Enrolling in and using this feature will reduce the overall
time for an order to be processed from the time that the end user has determined the need for product. The electronic Facesheet
provided by the e-validation system can be faxed or emailed along with a distributors order reducing the time and energy required for
original copies of Facesheets previously required. The system is for both new and existing restricted key system owners. For new
restricted systems, a registration process will provide the ability to create the initiating Facesheet for the project.
Products/key systems eligible for e-validation:
Everest – B and D restricted family of keyways
Everest 29 – R and T restricted family of keyways
Primus – All keyway families that include the Primus feature
Primus XP – All keyway families that include the Primus XP feature
E-validation can be accessed at the following web address: HTTPS://mycredentials.allegion.com
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
23
Terms-15
Cylinder Policies • TERMS & CONDITIONS
All goods are shipped F.O.B. factory and become the customer’s property when they pass into the hands of the transportation company.
Schlage reserves the right to use our choice of carrier.
Note: Master keys need to be ordered separately and are not included by default, cylinders are shipped with operating keys standard.
Keyway Family of Master Key System Standard Method of Shipment
• Classic Restricted (Numbered, Quad and Reverse)
• Classic Primus (Obverse and Quad)
• Everest Restricted (B and D Family)
• Everest 29 Restricted (R and T Family)
• Everest Primus (C and D Family)
• Everest 29 Primus and Primus XP (S and T Family)
• Classic Open (Obverse)
• Everest Open (C Family)
• Everest 29 Open (S Family)
2-Day Air
• Tracking number is assigned to shipment
• Recipient’s signature is required upon delivery
Schlage Default Keyways
Schlage Commercial products (excluding Portable Security)
Default keyway is Everest 29 S123
For other optional keyways, please specify
Schlage Electronics
Default keyway is Everest 29 S123
For other optional keyways, please specify
Portable Security - Kryptonite:
default to C keyway KD
For made to order products, please specify the keying and keyway
Schlage Residential: (F, B60, Dexter)
Default keyway is C
Master Key Shipment Policy
Price Book 6
Effective July 9, 2018
24
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-16
TERMS & CONDITIONS • Hardware Finishes
Hardware Finishes:
Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel or
other materials. Where required, a protective clear coating is applied and cured under high temperature. It is important that climatic
conditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strong
corrosive vapors, humid climate or sea air which, in a short time, may have a damaging effect on metal finishes. The longevity and
preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic
finishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not be
cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild, nonabrasive soap and
buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning
or preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware.
In some instances, for customer convenience, the most appropriate BHMA finish symbols are used to indicate similarity of appearance, regardless
of base metal of finishing process. A, AL, CS, D, ND, F, FA, H, S, S200-Series and Dexter by Schlage levers are zinc-based material and are plated
to match finishes indicated. L-Series will utilize a brass material for 612 and 613 finishes. Finishes of latches, strikes, cylinders/cores, and visible
mounting screws, though similar in appearance, may differ from the finish of the trim. Finish numbers in the 600-Series are the BHMA (Builders
Hardware Manufacturers Association) industry standard.
Commercial Finish Codes and Descriptions:
The nearest old U.S. equivalent code designations are shown in parenthesis ( ).
Symbol Description
605 (3) BRIGHT BRASS, Clear Coated
606 (4) SATIN BRASS, Clear Coated
609 (5) ANTIQUE BRASS, Satin Brass, Blackened,
Satin Relieved, Clear Coated
612 (10) SATIN BRONZE, Clear Coated
613* (10B) OIL RUBBED BRONZE, Oxidized Satin
Bronze, Oil Rubbed, No Coating
619 (15) SATIN NICKEL, Satin Nickel Plated,
Clear Coated
*
Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys
and forms of base material. 613 will also vary from production lot and additionally from one manufacturer to another. Oil rubbed
bronze will wear off over time due to the “rubbed” finishing method that has no protective coating or plating.
Symbol Description
622 (19) Matte Black
625 (26) BRIGHT CHROMIUM PLATED, No Coating
626 (26D) SATIN CHROMIUM PLATED, No Coating
629 (32) BRIGHT STAINLESS STEEL, No Coating
630 (32D) SATIN STAINLESS STEEL, No Coating
643e AGED BRONZE, Clear Coated
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
25
Terms-17
TERMS & CONDITIONS
Notes
Price Book 6
Effective July 9, 2018
26
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-18
Notes
TERMS & CONDITIONS
Price Book 6
Effective July 9, 2018
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
27
Terms-19
Notes TERMS & CONDITIONS
Price Book 6
Effective July 9, 2018
28
Forms & Examples
TERMS & CONDITIONS / FORMS & EXAMPLES
Terms-20
TERMS & CONDITIONS Notes
Terms & Conditions
TERMS & CONDITIONS / FORMS & EXAMPLES
29
Price Book 6
Effective July 9, 2018
Forms-1
Introduction FORMS & EXAMPLES
Table of Contents
How to Order Forms-2
How to Determine Hando of Door .........Forms-2
How to Determine Hand of Parts
(Handed Levers) ..........................Forms-2
Ordering Examples Forms-3
Sample Letter of Authorization
for Everest™ Restricted Products Forms-4
Primus Checklist Forms-5
Order Forms Forms-6
Using Order Forms ........................Forms-6
Sequential List of Order Forms ............Forms-6
Price Book 6
Effective July 9, 2018
30
Terms & Conditions
TERMS & CONDITIONS / FORMS & EXAMPLES
Forms-2
How to Determine Hand of Parts (Handed Levers)
FORMS & EXAMPLES • How To Order
To order Schlage products, descriptive data should be in the same sequence as shown:
LINE OUTSIDE INSIDE DR
ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM ADDITIONAL DETAILS
1 2 3 4 5 6 7 8 9 10 11 12 13 14
How to Determine Hand of Door
1. LINE ITEM: Line item number
2. QTY: Quantity
3. PRODUCT: Complete lock product or part number
4. OUTSIDE DES: Outside design code
5. OUTSIDE FIN: Outside finish code
6. INSIDE DES: Inside design code. Leave blank if same as outside design code.
7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code.
8. HAND: Hand of door. Only one hand allowed per line item.
Example: RH=Right Hand, LH=Left Hand, RR=Right Reverse, LR=Left Reverse.
9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is required. LLL=Less Latch.
10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. LLL=Less Strike.
11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138=1 3/8”, 214=2 1/4”, 212=2 1/2”.
12. EXT: Extension. Enter one of the following when doors 2” thick or greater are specified:
EE = Extended Equally
EI = Extended Inside
EO = Extended Outside
ED = Extended Differently
EI or EO assumes the latch will be centered on a 1 3/4” door, to which material has been added.
13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.
012 = 1/8” 118 = 1 1/8”
018 = 3/16” 114 = 1 1/4”
025 = 1/4” 138 = 1 3/8”
031 = 5/16” 112 = 1 1/2”
037 = 3/8” 158 = 1 5/8”
050 = 1/2” 134 = 1 3/4”
078 = 7/8” 200 = 2”
100 = 1” 400 = 4”
14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements.
Price Book 6
Effective July 9, 2018
Terms & Conditions
TERMS & CONDITIONS / FORMS & EXAMPLES
31
LINE OUTSIDE INSIDE DR
ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE THK EXT DIM ADDITIONAL DETAILS
One A or F-Series passage lock with a Georgian knob & rose in 609 on the outside and a Plymouth knob & rose in 605 on the inside, drive-in
latch and strike.
1 1 A10S GEO 609 PLY 605 11-110 10-058
One D-Series classroom lock with Orbit interchangeable core knob for a 2 1/4˝ thick door, extended equally, E keyway.
Also furnish one control key blank.
2 3 D70RD ORB RH 214 EE 138 E-111111
3 1 35-056 E section
Two AL-Series entrance locks with Saturn levers in US 10B with knurling on the outside, tamper resistant screws and
keyed alike.
4 2 AL53PD 8SA 613 SAT KA Torx screws
One S-Series storeroom lock with Saturn levers in 612, four keys per lock.
5 1 S80PD SAT 612 4 keys total
6 2 50-215 Charge for extra cut keys
One L-Series passage lock with 05L 630 trim, with lead lined chassis.
7 1 L9010 05L 630 RH Lead lined per XL11-515
One B600-Series single cylinder deadbolt in US 26D outside, US 3 inside, less the strike, with construction core. No control
or change keys.
8 1 B660T 626 LLL ICX
9 1 50-231 Handling Charge
One ND-Series lever lock in RHO 612, classroom function on the outside, storeroom on the inside. Construction and master
keyed to new system. Furnish one master key and one construction master key.*
10 1 ND70x80PD RHO 612 Per XN12-006
11 1 49-101 Master Key
12 1 48-104 Construction Master Key
13 2 50-210 Master keying charge (1/cyl)
14 2 50-211 Constr. keying charge (1/cyl)
One A-Series lock with an Orbit knob in US 3, entrance function, and Primus level 1 cylinder, CP keyway, 0-bitted, no keys.
15 1 A53LD ORB 605
16 1 20-724 606 122 Primus #000367,
CP-000000, LKB
One mortise cylinder, 1 1/4˝ long, which will operate a Von Duprin exit device
17 1 20-001 626 114
One hotel function L-Series lock with 17B trim in 625, large bow change keys and one large bow emergency key,
F section, 0-bitted. Left hand door.
18 1 L9485P 17B 625 LH F-000000, 35-141 Keys
19 2 50-228 Charge for large bow
keys substituted for
standard bow keys
20 1 35-101 F section
* Use Master Keyed order form and Key System Summary when ordering.
Forms-3
Ordering Examples • FORMS & EXAMPLES
Price Book 6
Effective July 9, 2018
32
Terms & Conditions
TERMS & CONDITIONS / FORMS & EXAMPLES
Forms-4
FORMS & EXAMPLES • Sample Letter of Authorization
For All Restricted Key Products
May 1, 2003
To: Schlage Dealer
100 East Avenue
Dealer City, State 11111
RE: District 10, Jones Elementary School
Please consider this authorization to ship product for the above-referenced project.
Jones Elementary School is to be keyed using a new Everest 29 T Restricted Key System. For security
reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master keyed products,
however, can be shipped directly to the site. This letter authorizes Schlage to ship our restricted products to the following
addresses:
Master Keyed Products, Construction Keys, Locks Less
Cylinders, and Locks with Construction Cores
Attn: Building Project Manager
District 10 Schools
555 Main Street
End User City, State 55555
Master Keys, Change Keys, Control Keys, and Key Blanks
Attn: Locksmith
District 10 Lockshop
1201 Fifth Avenue
End User City, State 55555
These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility. We
understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to
add, remove, or change authorized shipping locations.
Sincerely,
End User Representative
Facilities Manager
Date - REQUIRED
Facility Name - REQUIRED
Dealer Name -
RECOMMENDED
Include Registry
Number &
Facility Code
(stamped on
keys) for existing
key systems
Authorized Ship-
To Addresses -
REQUIRED
End User
Representative
Signature -
REQUIRED
Letter may be mailed or faxed to Schlage
Schlage Restricted Order Processing
3899 Hancock Expressway
Colorado Springs, CO 80911
District 10 Schools
555 Main Street
End User City, State 55555
(555) 555-5555
End User
Letterhead - REQUIRED
DISTRICT 10
Price Book 6
Effective July 9, 2018
Terms & Conditions
TERMS & CONDITIONS / FORMS & EXAMPLES
33
Forms-5
Primus Checklist • FORMS & EXAMPLES
PRIMUS AND EVEREST 29 PRIMUS ORDERING CHECKLIST
TO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDS
IMPORTANT NOTES
To expedite processing of all Primus orders, it is highly recommended that Primus products
be ordered separately
For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless Otherwise
Specified
For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless Otherwise Specified
PRIMUS EVEREST 29 PRIMUS
FOR LEVEL ONE
3 The Distributor’s Primus number MUST be
provided
3 The Sequence number MUST be provided
FOR LEVEL ONE PLUS
3 The Distributor’s Primus number MUST be
provided
3 The Sequence number MUST be provided
3 The Locksmith number MUST be provided
FOR LEVEL TWO
3 The Dealer’s Primus number MUST be
provided
3 The Sequence number and/or Section MUST
be Provided
FOR LEVELS THREE & FOUR
3 Orders Originating a System MUST include
both an Original Facesheet and a Signature
Card
3 An Original Facesheet MUST accompany all
succeeding orders
3 The Primus number MUST be indicated on
the Facesheet
3 ALL fields on the Facesheet MUST be
completed where applicable
FOR LEVEL SEVEN
3 The Distributor’s Primus number MUST be
provided
3 The Locksmith’s Facility code MUST be
provided
3 The Keyway MUST be provided
FOR LEVEL EIGHT
3 The Distributor’s Primus number MUST be
provided
3 The Keyway MUST be provided
FOR LEVEL NINE
3 Orders Originating a System MUST include
both an Original Facesheet and a Signature
Card
3 An Original Primus Facesheet MUST
accompany all succeeding orders
3 The Primus number MUST be indicated on
the Facesheet
3 ALL fields on the Facesheet MUST be
completed where applicable
All Primus Orders & Supporting Documentation Should be Sent To:
Schlage
Attn: Primus Order Processing
3899 Hancock Expressway
Colorado Springs, CO 80911
Price Book 6
Effective July 9, 2018
34
Terms & Conditions
TERMS & CONDITIONS / FORMS & EXAMPLES
Forms-6
FORMS & EXAMPLES • Order Forms
Using Order Forms
We recommend using the order forms included with this price book
when placing purchase orders for Schlage products. The following
14 pages of order forms are available for copying prior to placing your
order. Bulk supplies of blank forms are also available upon request.
Contact Customer Service to order bulk supplies of forms. Specify
form number.
Sequential List of Order Forms
Description
Form
Number
Rev
Date
Total
Pages
Available on
allegion.com/us
Non-Master Keyed Order Form, First Page MS-I250 3/14 1 page •
Non-Master Keyed Order Form, Additional Page MS-I300 3/14 1 page •
Master Keyed Order Form, First Page MS-I100 3/14 1 page •
Master Keyed Order Form, Additional Page MS-I150 3/14 1 page •
Key System Summary MS-I200 3/14 5 pages •
Primus® Facesheet MS-E120 3/14 1 page •
Primus® Signature Card MS-E130 3/14 1 page •
QUOTE #
PRICE BOOK #
SHIPPING INSTRUCTIONS
REQUESTED SHIPDATE
MARK CARTONS: ACCOUNT NO. P.O. NO. DATE
ORDER WRITTEN BY
FOR FURTHER INFORMATION, CONTACT:
Name:
Phone:
Fax:
CUSTOMER NAME AND ADDRESS: SHIP TO:
OUTSIDE INSIDE
HAND
DES DES FIN LATCH STRIKE
DR
THK EXT DIM
ADDITIONAL DETAILS
LINE
ITEM QTY PRODUCT FIN
Non-Master Keyed
ORDER
Use for Key Section and Bitting Information,
KA Groups, Primus® No., Locksmith ID No., etc.
Page 1 of
1
1
2
Ingersoll-Rand
250 Rev. 3/14
OUTSIDE INSIDE
HAND
DES DES FIN LATCH STRIKE
DR
THK EXT DIM
ADDITIONAL DETAILS
LINE
ITEM QTY PRODUCT FIN Use for Key Section and Bitting Information,
KA Groups, Primus® No., Locksmith ID No., etc.
© 2001 Ingersoll-Rand
MS- 300
Non-Master Keyed Order Add’l Page
Account No. P.O. No. Page of
IRev. 2/01
Rev. 3/14
MASTER KEYED ORDER
This form must be attached to the
MASTER KEY SYSTEM SUMMARY FORM
Please provide as complete and accurate as possible so we can
provide what you need for your Key System
Quote #: Account No.: P.O. #:
Shipping Instructions: Mark Cartons: Date:
Order Written By: Customer Name and Address: Ship to:
For Further Information Contact:
Name:
Phone:
Fax:
Page 1 of ___
Items Ordered OUTSIDE
HAND
(Only one
hand per
line item)
INSIDE LATCH STRIKE Enter door
thickness
if not
standard
Enter
when
door
thickness
is greater/
equal to
2˝
Dimen-
sion for
mortise
cylinder,
blocking
ring, etc.
ADDITIONAL DETAILS
Lock Details DESIGN FINISH DESIGN FINISH
Key/Label Instructions
QTY Heading DOOR #
KEY
Symbol-
(s)
MK
Symbol-
(s)
LINE
ITEM
QTY PRODUCT DR THK EXT DIM
Page 1 of ___
MS-I100
Items Ordered OUTSIDE
HAND
(Only one
hand per
line item)
INSIDE LATCH STRIKE Enter door
thickness
if not
standard
Enter
when door
thickness
is greater/
equal to 2˝
Dimension
for mortise
cylinder,
blocking
ring, etc.
ADDITIONAL DETAILS
Lock Details DESIGN FINISH DESIGN FINISH
Key/Label Instructions
QTY Heading DOOR #
KEY
Symbol(s)
MK
Symbol(s)
LINE ITEM QTY PRODUCT DR THK EXT DIM
Page 2 of ___Page 2 of ___
MS-I150
1 of 5 MS-I200
MASTER KEY
SYSTEM SUMMARY
This form must be attached to the
Master Key Order form and P.O.
Please provide as complete and accurate as
possible so we can provide what you need for
your Key System.
o New
o Attached Dealer Specified Combinations
Construction Keyed o Yes o No
Full Size Construction Cores o ICA o ICB o ICC
(Schlage Only)
Small Format Construction Cores o Brown o Green
Construction Keyed Type
o Falcon o CK (BOK) o Lost Ball
o Schlage o CK (Split) o RCK ( 5-Pin C only )
Type
o 5-pin o 6-pin o 7-pin
See compatibility chart on page 5
Keyway
Specified **:
Schlage
o Classic
o Classic Primus *
Everest ®
o B (Small Format IC, Restricted *)
o C (Open)
o Primus® *
o D (Restricted *)
o Primus® *
Everest 29™
o R (Small Format IC, Restricted *)
o S (Open)
o Primus® *
o T (Restricted *)
o Primus® *
Job Name
Address
City / State
Country
Account
No.
P.O.#
For detailed instructions on how to complete this form please refer to pages 4 & 5
System Overview
1. Select System
o Existing (provide info below)
Registry # __________________________________________
Structure or
Factory Order # _____________________________________
Falcon
o Standard
o Schlage C
o Restricted *
o Interchangeable Core A2
o Interchangeable Core A4
** = The Commercial Master Key Department makes the final
decision in the selection of key sections
Everest 29 key sections are backwards compatible to Everest
keyways and have the following relationships:
R family sections > B family keyways
S family sections > C family keyways
T family sections > D family keyways
Forms & Examples
2 of 5 MS-I200
2. Select Keys & Key Stamping
3. Select Cylinder Stamping
Change Keys
No. Of Keys per Symbol
No. Of Keys per Cylinder
Type
o Standard Bow o Standard Bow o Access Bow o Large Bow
(Unembossed) (Schlage Only)
Key Stamp Details
o Keyset Symbol o Do Not Duplicate o With Custom Die
(DND) (Specify)
o Non-standard Code (Specify)
Change Key Packaging and Shipping Instructions
Pack Keys Independently (PKI) of Lock or Cylinder ***
o Yes o No
If PKI, ship change keys to:
o Dealer o Other
o See Primus Facesheet
*** = Furnished standard at no charge with
Split-Key construction keying
Cylinder Stamp Details
o With Industry Standard Key Symbol o Non-Standard Code (Specify)
Cylinder Stamping Location
o Plug Face (N/A in Primus) - VKC o Concealed (N/A in Falcon STD) - CKC
Forms & Examples
3 of 5 MS-I200
6. Operating Instructions
(Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders)
Cross Keyed is operated by
Cylinder these change keys
X
X
X
X
Cross Keyed is operated by
Cylinder these change keys
X
X
X
X
GGM o
GM o
MK o
MK o
MK o
MK o
Others o
5. Master Key Future Expansion
List Future MK Symbols
Example:
MK………o BJ, BK 40 each
Approx. # of Change Key Symbols Under Each Future MK
3
Level Qty. Per Master Key Symbol (s) Total Quantity
GGM
GM
MK or RMK
Control
Emergency
Others
Ship Master Keys To:
o Dealer o See Primus Facesheet o Other
Special Function Qty. Per Qty. Per
RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only)
CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only)
Extractor Tools **** Small Format Construction Core Keys
Small Format Construction Core Control Keys
4. Select Key Quantities
**** = Use with Construction Keying
Forms & Examples
4 of 5 MS-I200
7. Instructions and Compatibility
General Information
If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer
Service prior to placing the order:
Tel. 1-877-671-7011
Fax 1-800-452-0663
• Only one structure may be ordered on the same purchase order
• Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families
• Classic Primus refers to Primus Obverse and Primus Quad key section families
Section 1: Select System
Full Size Construction Cores
• Schlage only
Small Format Construction Cores
• 7-pin only for Schlage
• 6- and 7-pin for Falcon
CK (Split)
• 6-pin for Schlage and Falcon
• Split key construction keying is not available for Classic Primus or Everest 29 Primus
RCK (Lost Ball)
• 5-pin (C keyway) only for Schlage
• 5-, 6-, and 7-pin for Falcon
System Selection
• Refer to the compatibility chart
Section 2: Select Keys and Key Stamping
Stamp Details
• Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys
• For custom die, attach RFQ approval for Schlage
Section 3: Select Cylinder Stamping
Type
• For cylinder type refer to the compatibility chart
Keyway (specify)
• Schlage Commercial’s default key section for new Master Key Systems is Everest™ S145
Forms & Examples
5 of 5 MS-I200
Section 4: Key Quantities
Level
• Unless otherwise specified, the control key has the same cut as the highest-level key in the system
(Except SFIC systems)
Special Function
• Construction keys are not furnished unless specified
Change Keys
• Unless otherwise specified 2 change keys are furnished per lock or cylinder
Section 5: Master Key Future Expansion
• Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols
Section 6: Operating Instructions
• Cross keying reduces the security and expansion of key systems
• Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders
5 Pin 6 Pin 7 Pin Split
Key
Block
O-Key
Lost
Ball
Temp
Core A2 A4 0.025 0.018
Schlage
Classic X X X X X
Everest 29 S X X X
Everest 29 T X X X
Everest 29 R X X X
Classic Primus (XP) X X
Everest 29 Primus (XP) X X
Falcon
Open X X X X X X
Restricted X X X X X
Schlage C X X
SFIC Open XX XXX
SFIC Restricted XX XXX
Compatibility Chart
Forms & Examples
IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:
29
MS-E120
PRIMUS SECURITY LEVEL:
Forms & Examples
© 2009 Ingersoll Rand
MS-E120 Rev. 6/09
Ingersoll Rand Security Technologies
Schlage
Attn.: Primus Order Processing
3899 Hancock Expressway
Security, CO. 80911
Allegion
Rev. 3/14
Forms & Examples
PRIMUS SECURITY LEVEL:
PROJECT INFORMA TION
Project Name (please print or type)
Street Address (no P .O. Box)
City State Zip Code
AUTHORIZED OWNER SIGNA TURE(S):
If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authorit y able to control
other signers on this form.
1.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
2.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
3.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
4.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
5.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
Level 3, 4, and 9 Order Authorization
Signature Card
PRIMUS ®
THIS SIGNA TURE CARD EST ABLISHES AUTHORIZA TION TO PURCHASE ADDITIONAL
PRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INST ALLED A T THE ADDRESS BELOW .
— OVER —
For Internal Use Only
Primus# Order#
G/Z/E S/M
THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER
– F AXED COPIES NOT ACCEPT ABLE –
3U (no exclusivity) 4Z (time exclusivity)
3G (2-digit zip exclusivity) 4N (nationwide exclusivity)
Classic K e yw a y s
9U (no exclusivity) 9Z (time exclusivity)
9G (2-digit zip exclusivity) 9N (nationwide exclusivity)
Ev erest 29 Keyways
MS-E130
Forms & Examples
DEALER OR LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)
Dealer or Locksmith Account # Primus #
Dealer or Locksmith Company Name
Phone Number Fax Number
Contact 1 (Please print or type)
Contact 1 Signature
Owners Authorization By (Please print or type)
SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature
authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility
for validating the owner’ s signature as identified on the Primus Signature Card before ordering
the material.
SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing
additional Primus product or duplicating keys.
Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send w ith letter
requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distrib utors
and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of
this card will not be accepted.
Please mail the original copy to: IR Schlage
Attn.: Master Key Control Department
2315 Briargate Parkway, Suite 700
Colorado Springs, CO 80920
– F AXED COPIES WILL NOT BE ACCEPTED –
© 2002 Ingersoll-Rand
MS-E130 Rev . 8/05
Effective From:
Date Date
to
Owners Authorization Signature Date
Address (no P.O. Box)
Contact 2 (Please print or type)
Contact 2 Signature
City State Zip Code
Schlage
Attn: Key Control Department
3899 Hancock Expressway
Colorado Springs, CO 80911
Please mail the original copy to:
MS-E130 Rev. 3/14
Forms & Examples
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
57
DEALER OR LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)
Dealer or Locksmith Account # Primus #
Dealer or Locksmith Company Name
Phone Number Fax Number
Contact 1 (Please print or type)
Contact 1 Signature
Owners Authorization By (Please print or type)
SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature
authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility
for validating the owner’ s signature as identified on the Primus Signature Card before ordering
the material.
SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing
additional Primus product or duplicating keys.
Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send w ith letter
requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distrib utors
and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of
this card will not be accepted.
Please mail the original copy to: IR Schlage
Attn.: Master Key Control Department
2315 Briargate Parkway, Suite 700
Colorado Springs, CO 80920
– F AXED COPIES WILL NOT BE ACCEPTED –
© 2002 Ingersoll-Rand
MS-E130 Rev . 8/05
Effective From:
Date Date
to
Owners Authorization Signature Date
Address (no P.O. Box)
Contact 2 (Please print or type)
Contact 2 Signature
City State Zip Code
A Series
GRADE 2 CYLINDRICAL KNOB LOCK
A-Series
Exploded View - A53PD
7/8" dia.
22 mm 2-1/8"
54 mm
2-3/8"
60 mm
1"
25 mm
2-1/4"
57 mm
Inside knob
Inside rose
Mounting screws
Mounting plate
Lock chassis
6-Pin cylinder
Box
Strike
Outside knob
Outside rose
Reversible deadlatch
1/2
" Throw
Door Preparation
A-1
58
ND-Series D-Series AL-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
A-2
A Series
Ordering Procedures
To order Schlage products, descriptive data should be in the same sequence as shown below.
Line Item: Line item number
Qty: Quantity
Product: Product function + Cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design: Specify only if different from the outside lever design
Inside Fin: Inside lever nish: Specify only if different from the outside nish
Hand: Hand of door: N/A for A lock
Latch: Product latch: Leave blank for standard latch or specify part number if non-standard latch is required.
Strike: Product strike: Leave blank for standard strike or specify part number if non-standard strike is required.
Dr Thk: Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4"
Ext: Extension: Enter for doors 1 7/8" or greater. Example: EE=extended equally, EI=extended inside,
EO=extended outside, ED=extended differently
Dim: Dimension: Enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 A53PD PLY 626 LEV 613 - 11-085 10-001 178 EE -KA
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
59
Price Book 6
Effective July 9, 2018
A-3
A
Introduction
Product Identification
A 53 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
P = 6-Pin Cylinder
L = Less 6-Pin Cylinder
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T = Full Size Construction Core
Z = Everest SL 7 pin Cylinder
Function
Lock Series
Finish Codes
and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
629 (US 32) Bright Stainless Steel
630 (US 32D) Satin Stainless Steel
643e (US 11) Aged Bronze
Standard Features
Certification ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Latch 1" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw
Strike 1 1/8" x 2 3/4", Square corner, T-strike, box
Backset 2 3/8"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 3/8" – 1 7/8"
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
Table of Contents
Functions A-4
Complete Locks A-5
Options A-7
Latches ........................................A-7
Strikes .........................................A-7
Lock Less Components ........................ A-8
Non-Standard Door Thickness ................ A-8
Tamper Resistant Torx® Screws. . . . . . . . . . . . . . . . A-8
Special Functions ............................. A-8
Parts A-9
Knobs and Related Components .............. A-9
Roses ......................................... A-9
Latches and Related Components ............ A-9
Strikes ........................................A-10
Plunger Parts ................................. A-11
Reinforcements and Adapters ................. A-11
Finished Miscellaneous Parts ..................A-12
Miscellaneous Parts ...........................A-12
Screws ........................................A-13
Screw Packs ..................................A-13
Torx Screw Packs .............................A-13
Cylinder Reference Table ......................A-13
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
Price Book 6
Effective July 9, 2018
60
ND-Series D-Series AL-Series CYLINDRICAL
A-4
A • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Non-Keyed Locks Keyed Locks
SCHLAGE ANSI
A10S F75 A53PD F109
Passage Latch
Both knobs always unlocked.
A25D Exit Lock
Blank plate outside. Inside knob
always unlocked. Specify door
thickness. A70PD F84 Classroom Lock
Outside knob locked and
unlocked by key. Inside knob
always unlocked.
A79PD Communicating Lock
With Blank Plate
Locked or unlocked by key from
outside. Blank plate inside.
A80PD F86 Storeroom Lock
Outside knob fixed. Entrance by key
only. Inside knob always unlocked.
A30D F77
Patio Lock
Push-button locking. Turning inside
knob or closing door releases button,
preventing lock-out.
A40S F76 Bath/Bedroom Privacy Lock
Push-button locking. Can be unlocked
from outside with small screwdriver.
Turning inside knob or closing door
releases button.
A43D F79 Communicating Lock
Turn-button in outer knob locks and
unlocks knob and inside thumbturn.
A85PD F93 Faculty Restroom Lock
(with Indicator Cylinder)
Outside knob fixed. Entrance by key
only. Push-button in inside knob
activates visual occupancy indicator,
allowing only emergency master key
to operate. Turning inside knob or
closing door releases visual
occupancy indicator. Rotation of
inside spanner-button provides
lock-out feature by keeping indicator
activated.
A170 Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
Entrance Lock
Turn/push-button locking; pushing
and turning button locks outside
knob, requiring use of key until
button is manually unlocked. Push-
button locking; pushing button locks
outside knob until unlocked by key
or by turning inside knob.
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
61
A-5
Georgian (GEO) Levon (LEV) * Orbit (ORB) Plymouth (PLY) Tulip (TUL)
Complete Locks • A
Latches
11-068
Standard 11-085
Standard 11-104 41-005
Strikes
10-001
Standard
10-004 10-025 10-026 10-058
* The Levon lever is available on inside trim for the following functions: 25, 30, 53, 70, 80 & 85.
Roses
Outside Rose - Plymouth
Knob: Plymouth & Levon
Size: 2 1/2" dia.
Outside Rose - Georgian
Knobs: Georgian
Size: 2 1/2" dia.
Outside Rose - Tulip
Knobs: Tulip & Orbit
Size: 2 1/2" dia.
Price Book 6
Effective July 9, 2018
62
ND-Series D-Series AL-Series CYLINDRICAL
A-6
Complete Locks • A
Function Description
Designs and Finishes Primary Cylinder Adjustments
Available Levers
Available FinishesORB PLY GEO TUL LEV***
626
605 6606
6609 612*
6625 643e*
613 6629**
630** LD
RD
TD JD
Keyless ALL ORB
A10S Passage
128 140 158
605 6606 6609 612 613 6625 626
6629 630 643e
A25D Exit, blank plate x lever
A40S Privacy
A30D Privacy, hospital 172 184 202
A43D Privacy, hospital
A170 Single dummy 64 70 80
Keyed, Single Cylinder LD
RD
TD**** JD
A53PD Entrance
227 239 257 -62 37 -34
A70PD Classroom
A80PD Storeroom
A79PD Communicating 262 274 292
A85PD Faculty Restroom Lock -92 N/A
SECONDARY
CYLINDER
ADJUSTMENTS
Everest And Restricted Keyway - does not apply to Primus
Everest D & T Family & Restricted Keyways (Quad, Numbered, Reverse) +17
SL Cylinder with Everest B or Everest R keyways +17
Primus/Primus XP - order the lock less cylinder and the cylinder separately (prices below)
Single Kil Example: 1 Ea. A53LD & 1 Ea. 20-724(-XP) +137
Single Fsic Example: 1 Ea. A53JD & 1 Ea. 20-740(-XP) +148
*Not available for GEO LEV TUL
** Finishes only available in PLY
*** The Levon lever is available on inside trim for the following functions: 25, 30, 53, 70, 80 & 85
**** Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
63
Options• A
A-7
Latches, Strikes
Latches
Part Number Backset - Hsg Dia. - Description Lock Adjustment
Spring Latch
11-068 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
N/C
11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-110 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-113 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" +12.40
Deadlatch
11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
N/C
11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-104 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-105 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" +12.40
41-005 5" - 7/8" - Backset extension link - require reinforcement when used in hollow metal door applications;
must be used with 2 3/8" backset latches +19.80
Strikes
Part Number Lip Length - Description Lock Adjustment
10-001
1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" N/C
1" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
+7.00
1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-004 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" N/C
10-025
1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" N/C
1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" +27.20
1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4"
N/C
10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
10-058 Circular, adjustable, 1 3/4" diameter - 605 and 626 nishes only
K510-066 Box for ANSI strike, must be specied
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Price Book 6
Effective July 9, 2018
64
ND-Series D-Series AL-Series CYLINDRICAL
A-8
Locks Less Components
Description Specify Lock Adjustment
Less each knob LLL for knob design
Example: A53PD LLL/PLY x PLY -8.00
Less each rose or turn LLL for rose design
Example: A53PD PLY x PLY/LLL -6.30
Less springlatch LLL for latch
Example: A40S PLY 605 LLL 10-004 -10.30
Less deadlatch LLL for latch
Example: A53PD PLY 626 LLL 10-025 -17.20
Less strike LLL for strike
Example: A53PD PLY 612 11-096 LLL -3.70
Lock chassis and spring cages only Less all possible components
Example: A53LD LLL 626 LLL LLL
Sum of deducts
Non-Standard Door Thickness
Description Specify Lock Adjustment
Extended Inside (EI), 2" thru 2 1/2" Door thickness and how door is extended.
Example: 2 1/2", EI +53.70
Tamper Resistant Torx® Screws
Specify/
Part Number Description Lock Adjustment
Torx Screws Screws - Latch and Strike +20.70
Special Functions - Extended Lead Times
Part Number
Description Base Lock Lock AdjustmentLock Function “X” Number
A53PD XA11-297 A53PD with restoring slide A53PD +164.00
A • Options Locks Less Components, Non-Standard Door Thickness,
Tamper Resistant Torx Screws, Special Functions
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
65
Parts • A
A-9
Knobs and Related Components, Roses, Latches and Related Components
Knobs and Related Components
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
01-008 ORB PLY; 01-009 ORB PLY; 01-026 ORB •6 6 • • 6•6• •
01-008 TUL GEO LEV; 01-009 TUL GEO LEV •6 6 •6•
Part Number Description Price Each
01-008* Closed Knob or Lever - GEO LEV ORB PLY TUL $40.20
01-009* Open Knob or Lever - GEO LEV ORB PLY TUL
01-018* Open Knob - with sleeve for cylinders - GEO ORB PLY TUL 55.90
01-026* Full Size Core Knob - ORB 75.30
01-053 Full size core driver and retainer - nish not required 13.00
A501-941 Full size core retainer - nish not required 4.90
C604-307 Full size core driver, universal - nish not required 9.40
*Specify part number, knob style, nish. Ex: 01-009 GEO 626 (open knob, Georgian design, 626 nish)
Roses
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
01-001 TUL PLY, 01-002 TUL PLY, A201-558, A501-766 •6 6 • • 6•6• •
01-001 GEO, 01-002 GEO •6 6 •6•
Part Number Description Price Each
01-001** Outside Rose - TUL PLY GEO $30.30
01-002** Inside Rose - TUL PLY GEO
A201-558 Rose, out. - A25 53.30
A501-766 Rose, ins. - A79 47.70
** Specify part number & nish. Ex: 01-002 PLY 626 Plymouth design, 626 nish)
Latches and Related Components
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
11-068, 11-069, 11-110, 11-111, 11-112, 11-116, 11-113, 11-118, 11-085, 11-088, 11-104, 11-091,
11-092, 11-096, 11-105, 11-103 •••••••6• •
39-030 • •
Part Number Backset - Hsg Dia. - Description Price Each
Spring Latch
11-068 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
$58.40
11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-110 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-113 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 62.80
Dead Latch
11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
58.40
11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-104 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-105 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 62.80
41-005
5" - Backset extension link - require reinforcement when
used in hollow metal door applications; backset link
must be used with 2 3/8" backset latches.
22.10
39-030
Rabbeted latch and strike kit - adapts square corner
latches and 2 3/4" high square corner strikes to 1/2"
rabbeted door and frame preparations.
56.50
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Price Book 6
Effective July 9, 2018
66
ND-Series D-Series AL-Series CYLINDRICAL
Strikes
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
10-001, 10-004, 10-025, 10-026, 10-027 •••••••6• •
10-058 • •
Part Number Lip Length - Description Price Each
10-001 118 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" $6.50
10-001 100 1" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
13.50
10-001 114 1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-001 112 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-001 134 1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-001 200 2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-004 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 10.80
10-025 1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 14.30
10-025 138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 42.40
10-025 112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 7.60
10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 7.60
10-058 Circular, adjustable, 1 3/4" diameter 10.90
K510-066 Box for ANSI strike - nish not required 6.60
A-10
A • Parts Strikes
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
67
A-11
Parts • A
Plunger Parts, Reinforcements and Adapters
Plunger Parts
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
01-055, 01-056, 01-057, 01-058, 01-060, 01-063 •6 6 • • 6•6• •
Part Number Dimension - Design - Door Range - Description Price Each
01-055*
360 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A30
$15.80
424 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A30
449 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A30
428 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A30
492 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A30
517 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A30
01-056*
360 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A40
424 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A40
449 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A40
428 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A40
492 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A40
517 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A40
01-057*
070 - Non-ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40
135 - Non-ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40
070 - ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40
135 - ORB - 1 3/8" – 2 1/2", EI - Plunger unit, out. - A40
01-058*
281 - Non-ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43
349 - Non-ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43
281 - ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43
349 - ORB - 1 3/8" – 2 5/8", EI - Plunger unit, out. - A43
01-060*
360 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A53
424 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A53
449 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A53
428 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A53
492 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A53
517 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A53
01-063*
363 - Non-ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A85
32.30
427 - Non-ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A85
452 - Non-ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A85
431 - ORB - 1 3/8" – 1 7/8" - Plunger unit, ins. - A85
497 - ORB - over 1 7/8" – 2 1/4", EI - Plunger unit, ins. - A85
520 - ORB - over 2 1/4" – 2 1/2", EI - Plunger unit, ins. - A85
*Specify part number, dimension, design & nish. Ex: 01-060 492 ORB 626
Reinforcements and Adapters
Part Number Description Price Each
37-001
Metal door reinforcer kit, ts both 7/8" and 1" diameter housings
- Specify door thickness, includes A501-567 and A501-565 or
A501-566.
$38.20
A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both
7/8" and 1" diameter housings. 19.20
A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both
7/8" and 1" diameter housings.
A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between
latch and backset link or to hold latch in metal doors. 11.90
A501-878** Faceplate adapter to adapt 1" faceplate to 1 1/8" door
preparation 0.76
G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 6.70
** Order in multiples of 100
Price Book 6
Effective July 9, 2018
68
ND-Series D-Series AL-Series CYLINDRICAL
A-12
Finished Miscellaneous Parts
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
38-018, A201-330, A201-399, A201-406, A201-684, A201-688, A301-403,
A301-404, A301-405, A301-406 •6 6 • • 6•6• •
Part Number Description Price Each
38-018 Thin door extension ring (2 required per lock) $12.80
A201-330 Non-threaded chassis, less knob & rose - A170 43.40
A201-399 Hub & cap, out. (except A10, A25, A40, A43) 31.20
A201-406 Hub & cap, out. - A10, A40, A43
A201-684 Threaded chassis, less knob & rose - A170 43.40
A201-688 Turn unit, ins. - A43 53.30
A301-403 Housing & cap, 1 3/8" thru 1 7/8" door (except A43, A79)
11.70A301-404 Housing & cap, 1 7/8" thru 2 1/4" door, EI (except A43, A79)
A301-405 Housing & cap, 2 1/4" thru 2 1/2" door, EI (except A43, A79)
A301-406 Threaded housing & cap, ins. (except A43, A79) 11.80
Miscellaneous Parts
Part Number Description Price Each
A201-370 Cam & driver - A80 $9.50
A201-377 Mounting plate, ins. (except A43, A79)
9.70
A301-386* Spindle & catch, ins. (except A43, A79)
A301-387 Spindle & catch, out. (except A25, A43)
A301-391* Cam unit - A30
A301-402 Cam unit, out. - A40, A53, A85
A301-409* Spindle, 1 7/8" thru 2 1/4" door, EI (except A43, A79) 40.30
A301-410* Spindle, 2 1/4" thru 2 1/2" door, EI (except A43, A79)
A500-001 Spindle, ins, 2" thru 2 1/4" door, EI - A43 16.40
A500-002 Spindle, ins., 2 1/2" door, EI - A43
A501-167 Threaded rod for mounting A170s as double dummy set 16.40
A501-305 Hub plate, ins. (except A79) 7.70
A501-498 Hub, 1 3/8" door - A25 11.60
A501-499 Hub, 1 3/4" door - A25 11.70
A501-615 Spindle wedge - A80, A85 7.20
A501-633 Spindle, ins. - A43 8.50
A501-710 Swivel sleeve - A85 (except ORB design) 7.30
A501-721 Cam plug - A70, A79 22.00
A501-767 Mounting plate - A79 7.30
A501-768 Hub plate, ins. - A79
A501-791 Cam & plug spacer - A70, A79 4.50
A501-874 Hub plate, out. - A25 11.60
A501-901 Plate, out. - A80, A85 5.10
A508-399 Plate, out. (except A25, A80, A85) 9.80
A508-597 Spring separator (except A10, A25, A40, A43) - require frame
A508-598 7.30
A700-017 Spiral cam - A70, A79 10.90
A508-598 Frame 11.70
A508-600 Housing - A43, A79 16.20
A508-605 Slide spring 7.30
A508-640 Spacer, ORB knob 8.20
A508-641 Slide stop - A43 29.70
A590-158* Slide, restoring - A30, A85
7.30
A590-159 Slide, non-restoring - A43, A53, A70, A79, A80
A590-180 Slide, restoring - A40
A590-181 Slide, non-restoring - A10, A25
C503-008** Cotter pin 0.68
G570-232 Plug, spindle, lever designs only - A10 13.40
* Parts that are not directly interchangeable with locks manufactured before 1984
** Order in multiples of 100
A • Parts Finished Miscellaneous Parts, Miscellaneous Parts
ND-SeriesD-SeriesAL-SeriesCYLINDRICAL
69
Price Book 6
Effective July 9, 2018
Parts • A
A-13
Screws, Screw Packs, Torx Screw Packs, Cylinder Reference Table
Screws
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
A508-649, A508-650, C603-256, C603-897 •6 6 • • 6•6• •
Part
Number Door Thickness - Description Type Size Price Each
A501-161* 1 3/8" – 1 7/8" - Mounting, All
(except A43, A79) POH Mach 10-32 x 1 1/8" 1.00
A501-818* 2" – 2 1/2", EI - Mounting, All
(except A43, A79) POH Mach 10-32 x 2 1/16" 1.20
A501-769* 1 3/8" – 2" - Mounting, A79 POMH 1-way 10-32 x 1 1/8" 1.40
A501-770* 2" – 2 3/4", EI - Mounting, A79 POMH 1-way 10-32 x 2" 1.40
A508-649* 1 3/8" – 1 7/8" - Mounting, A43 Torx screw (T-20) 10-32 x 1 1/8" 25.40
A508-650* 2" – 2 1/2", EI - Mounting, A43 Torx screw (T-20) 10-32 x 2"
C603-256* ANSI strike PFH Combo 12-24 x 1" 1.00
C603-897* Latch and strike PFH Combo 8-32 x 3/4" 0.88
* Order in multiples of 100
Cylinder Reference Table
Available Finishes - Specify for Listed Parts 606, 626
21-002/122, 20-724/XP/122, 20-524/XP/122, 21-003/168, 91-052, 91-752-XP, 91-552-XP
Part Number Cylinder Mechanism Function Design Price Each Price Each - Restricted
21-002 Standard
Standard
Functions
Except Orbit
$62.00 $79.00
91-004 Everest SL (R/B Keyways only)
20-724 Primus 137.00
20-724-XP Primus XP
91-704-XP Everest SL Primus XP (R/B
Keyways only) 137.00
20-524 Primus UL437 169.00
20-524-XP Primus UL437 XP
91-504-XP Everest SL Primus XP UL 437
(R/B Keyways only) 169.00
21-002-122 Standard
Orbit Except
A73 Function
62.00 79.00
91-005 Everest SL (R/B Keyways only) 79.00
20-724-122 Primus 137.00
20-724-XP-122 Primus XP
91-705-XP Everest SL Primus XP (R/B
Keyways only) 137.00
20-524-122 Primus UL437 169.00
20-524-XP-122 Primus UL437 XP
91-505-XP Everest SL Primus XP UL 437
(R/B Keyways only) 169.00
Complete
cylinder
discontinued
but may be
assembled in
the eld
Standard
A73 Orbit
Primus
Primus XP
Primus UL437
Primus UL437 XP
21-003 Standard A85 Except Orbit 92.00 109.00
21-003-168 Orbit 92.00 109.00
Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
A201-811, A201-812 •6 6 • • 6•6• •
Part
Number Description Contents Price Each
A201-811 Mounting, latch and strike (except
A43, A170)
(2) A501-161
(4) C603-897 $8.10
A201-812 Mounting, A170 (3) C603-897 6.20
A201-814 Mounting, A43 (2) A508-649 4.90
Torx Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
C203-311, C203-312 •6 6 • • 6•6• •
Part
Number Description Contents Price Each
C203-311** Latch and strike (4) C503-766 (T-15)
$20.70
C203-312** Latch and ANSI strike (2) C503-766 (T-15)
(2) L583-371 (T-20)
** Torx screw packs are furnished with appropriate T-xx installation tool(s)
Price Book 6
Effective July 9, 2018
70
ND-Series D-Series AL-Series CYLINDRICAL
A-14
A Notes
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
71
AL Series
GRADE 2 CYLINDRICAL LEVERED LOCK
AL-Series
Exploded View - AL53PD
Castle nut
Inside spring cage
Lock chassis
Outside lever
Mounting
screws
Plastic
insert
ANSI strike
Inside lever
Driver cap
Driver
Rose
6-Pin cylinder
Rose and outside spring cage
Reversible deadlatch
¹⁄₂
" Throw
2-1/4"
57 mm
2-3/4"
70 mm
1" dia.
25 mm
5/16" dia.
8 mm
2-1/8"
54 mm
1-1/8"
29 mm
2-3/4"
70 mm
Door Preparation
AL-1
Indicates products that have EPD documentation available and meet LEED v4.
72
ND-Series D-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
AL Series
Ordering Procedures
To order Schlage products, descriptive data should be in the same sequence as shown below.
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + Cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design: Specify only if different from the outside lever design
Inside Fin: Inside lever nish: Specify only if different from the outside nish
Hand: Hand of door: N/A for AL lock
Latch: Product latch: Leave blank for standard latch or specify part number if non-standard latch is required.
Strike: Product strike: Leave blank for standard strike or specify part number if non-standard strike is required.
Dr Thk: Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4"
Ext: Extension: Enter for doors 1 7/8" or greater. Example: EE=extended equally, EI=extended inside, EO=extended
outside, ED=extended differently
Dim: Dimension: Enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 AL53PD SAT 626 NEP 619 - 11-096 10-025 200 EE --
AL-2
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
73
Price Book 6
Effective July 9, 2018
AL-3
AL
Introduction
Product Identification
AL 53 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
P = 6-Pin Cylinder
L = Less 6-Pin Cylinder
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T = Full Size Construction Core
B = Less SFIC
BDC = Disposable SFIC
G = Everest 29 Patented SFIC
H = Construction SFIC
Z = Everest SL 7 pin Cylinder
Function
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
622 (US 19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
626AM Antimicrobial Coating on
Satin Chromium
643e (US11) Aged Bronze
Standard Features
Certification ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike 1 1/4" x 4 7/8", ANSI, Square corner, no box
Backset 2 3/4"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 3/8" – 1 7/8"
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
Indicates products that have EPD documentation available and meet LEED v4.
Table of Contents
Functions AL-4
Complete Locks AL-5
Options AL-7
Latches ...................................... AL-7
Strikes ....................................... AL-7
Lock Less Components .......................AL-8
Non-Standard Door Thickness ...............AL-8
Miscellaneous Lock Options ..................AL-8
Special Functions ............................AL-8
Parts AL-9
Levers and Related Components .............AL-9
Roses ........................................AL-9
Latches and Related Components .......... AL-10
Strikes ...................................... AL-10
Plunger Parts ................................AL-11
Reinforcements and Adapters ................ AL-11
Parts for 2" Doors ............................AL-11
Hub, Frame and Housing Kits —
For Locks Manufactured before May, 2003 ...AL-11
Miscellaneous Parts ..........................AL-12
Special Parts .................................AL-12
Screws .......................................AL-13
Screw Packs .................................AL-13
Torx Screw Packs ............................AL-13
Cylinder Reference Table .....................AL-13
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
Price Book 6
Effective July 9, 2018
74
ND-Series D-Series A-Series CYLINDRICAL
AL-4
AL • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Non-Keyed Locks Keyed Locks
AL10S F75
SCHLAGE ANSI
Passage Latch
Both levers always unlocked.
AL25D Exit Lock
Blank plate outside. Inside lever
always unlocked. Specify door
thickness.
AL40S F76 Bath/Bedroom Privacy Lock
Push-button locking. Can be unlocked
from outside with small screwdriver,
not included. Turning inside lever or
closing door releases button.
AL44S Hospital Privacy Lock
Push-button locking. Unlocked
from outside by turning emergency
turn-button. Turning inside lever or
closing door releases button.
AL170 Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
AL50PD F82 Entrance/Office Lock
Push-button locking. Push-button
locks outside lever until unlocked
with key or by rotating inside lever.
AL53PD F109 Entrance Lock
Turn/push-button locking; pushing
and turning button locks outside lever
requiring use of key until button is
manually unlocked. Push-button
locking; pushing button locks outside
lever until unlocked by key or by
turning inside lever.
AL70PD F84 Classroom Lock
Outside lever locked and unlocked by
key. Inside lever always unlocked.
AL80PD F86 Storeroom Lock
Outside lever fixed. Entrance by key
only. Inside lever always unlocked.
AL85PD F93 Faculty Restroom Lock
(with Indicator Cylinder)
Outside lever fixed. Entrance by key
only. Push-button in inside lever
activates visual occupancy indicator,
allowing only emergency masterkey
to operate. Turning inside lever or
closing door releases visual
occupancy indicator. Rotation of
inside spanner-button provides lock-out
feature by keeping indicator
activated.
SCHLAGE ANSI
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
75
Commercial Lever Suite
AL Lock L Lock Levers 98/99 Exit ND Levers S Lock
Jupiter 07 07 Athens Jupiter
Omega Omega 16 Omega
Neptune 17 17 Sparta Neptune
Saturn 06 06 Rhodes Saturn
Jupiter (JUP) Neptune (NEP) Omega (OME) Saturn (SAT)
Complete Locks • AL
Tactile Options
Saturn Lever Shown
Tactile Warning (knurling)
Roses
Inside/Outside Rose - Rhodes
Levers: JUP, NEP, SAT
Size: 3 7/16" dia.
Inside/Outside Rose - Omega
Levers: OME
Size: 3 7/16" dia.
Strikes
10-001 10-025
Standard
10-027 10-058
Latches
11-068 11-088 11-096
Standard
11-104 11-116
AL-5
76
ND-Series D-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
Function Decription
Designs and Finishes
PRIMARY CYLINDER ADJUSTMENTS
AVAILABLE LEVERS
AVAILABLE FINISHES
JUP NEP OME SAT
626
605 606
609 612
619 622
625 643e
613
6626AM
Keyless
LD RD
TD** JD BD
BDC GD HD**AL10S Passage 186 198 216
AL25D Exit, blank plate x lever 203 215 233
AL40S Privacy 212 224 242 ALL JUP NEP SAT*
AL44S Privacy, hospital 605 606 6609 612 613 619
622 625 626 643e 6626AM
AL170 Single dummy 108 114 124
Keyed, Single Cylinder
LD
CD
RD
TD JD BD
BDC GD HD
AL50PD Entrance/Ofce
271 283 301 -62 37 -34 N/C 82 43
AL53PD Entrance
AL70PD Classroom
AL80PD Storeroom
AL85PD Faculty Restroom Lock 312 324 342 -92 Not Available
Secondary
Cylinder
Adjustments
EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS
EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +17
SL Cylinder with Everest B or Everest R keyways +17
PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW)
SINGLE KIL EXAMPLE: 1 EA. AL53LD & 1 EA. 20-728(-XP) +137
SINGLE FSIC EXAMPLE: 1 EA. AL53JD & 1 EA. 20-740(-XP) +148
*Only lever available in 609 nish for FSIC and SFIC
** Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
AL • Complete Locks
AL-6
Price Book 6
Effective July 9, 2018
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
77
Options • AL
AL-7
Latches
Part Number Backset - Hsg Dia - Description Lock Adjustment
Spring Latch
11-068 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
N/C
11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-110 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-113 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" +13.20
Deadlatch
11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
N/C
11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-104 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-105 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" +13.20
41-005 5" - Backset extension link - require reinforcement when used in hollow metal door applications; backset link must be used
with 2 3/8" backset latches +21.10
Strikes
Part Number Lip Length - Description Lock Adjustment
10-001
1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" N/C
1" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
+7.50
1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-004 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" N/C
10-025
1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" N/C
1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" +27.20
1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4"
N/C
10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
10-058 Circular, adjustable, 1 3/4" diameter - 605 and 626 nishes only
K510-066 Box for ANSI strike, must be specied
Latches, Strikes
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Price Book 6
Effective July 9, 2018
78
ND-Series D-Series A-Series CYLINDRICAL
AL • Options
AL-8
Lock Less Components, Non-Standard Door Thickness,
Miscellaneous Lock Options, Special Functions
Non-Standard Door Thickness
Description Specify Lock Adjustment
Extended Equally (EE), over 1 7/8" – 2"
(SFIC not available for 1 7/8" - 2" door thickness)
Door thickness and how door is extended.
Example: 2", EE +4.90
Miscellaneous Lock Options
Specify/Part Number Description Lock Adjustment
8SA Tactile Lever - Saturn +44.50*
Torx Screws Screws - Latch and Strike +20.70
* Per lever
Locks Less Components
Description Specify Lock Adjustment
Less each lever LLL for lever design
Example: AL53PD LLL/JUP x SAT
-9.30
Less each rose LLL for rose design
Example: AL53PD SAT x SAT/LLL
-11.60
Less springlatch LLL for latch
Example: AL40S SAT 605 LLL 10-025
-11.60
Less deadlatch LLL for latch
Example: AL53PD SAT 626 LLL 10-025
-18.70
Less strike LLL for strike
Example: AL53PD ATH 612 11-096 LLL
-4.50
Lock chassis and spring cages only Less all possible components
Example: AL53LD LLL 626 LLL LLL, lever chassis
Sum of
deducts
Special Functions - Extended Lead Times
Part Number
Function - Description
Base
Lock Lock Adjustment
(Base Lock)
Lock Function “X” Number
AL50PD XA11-297 AL50PD with restoring slide AL50PD 179.00
AL53PD XA11-297 AL53PD with restoring slide AL53PD
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
79
Price Book 6
Effective July 9, 2018
AL-9
Levers and Related Components, Roses Parts • AL
Levers and Related Components
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
51-021, 51-023, 51-025, 51-026, 51-022 SAT, 51-024 SAT, A700-041 • • 6•••••••6
51-022 JUP NEP, 51-024 JUP NEP •• •••••••6
Part
Number Description Price Each
51-021* Closed Lever - JUP NEP OME SAT - locks man. before June 2003
$87.80
51-023* Open Lever - JUP NEP OME SAT - locks man. before June 2003
51-025* Closed Lever - JUP NEP OME SAT - locks man. after June 2003
51-026* Open Lever - JUP NEP OME SAT - locks man. after June 2003
51-022* Full Size Core Lever - JUP NEP SAT 75.30
51-024* Small Format Core Lever & lever insert- JUP NEP SAT 82.80
A700-041 Driver cap, 1 3/8" - 1 7/8" doors - for locks man. after May 2002 4.30
A700-039 Driver, 1 3/8" - 1 7/8" doors - for locks man. after May 2002 20.20
A700-045 Lever insert for SFIC 7.00
A700-052 FSIC Core Driver, Universal 9.20
A700-021 SFIC Core Retainer 7.20
C604-381 SFIC Core Throw Member 8.40
D500-000 SFIC Core Spacer - 2 spacers required for 6-pin, 1 spacer required
for 7-pin 1.60
A700-047 Interchangeable core lever insert, 1 3/8" - 1 7/8" doors 7.00
A700-044 Lever insert, 1 3/8" - 1 7/8" doors for locks man. after May 2002 6.50
*Specify part number, lever style, nish. Ex: 51-025 NEP 626 (closed lever, Jupiter design, 626 nish)
Roses
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
04-060 • • 6•••••••6
C604-402 • • 6•••••••
Part
Number Description Price Each
04-060** Outside / Inside Rose - RHO OME $101.00
C604-402 Blank Plate, AL25 103.00
** Specify part number, lever style, nish. Ex: 04-060 SAT 626 (Saturn design, 626 nish)
80
ND-Series D-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
AL • Parts
AL-10
Latches and Related Components, Strikes
Latches and Related Components
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
11-068, 11-069, 11-110, 11-111, 11-112, 11-116, 11-113, 11-118, 11-085, 11-088, 11-104,
11-091, 11-092, 11-096, 11-105, 11-103 ••••••••••
39-030 • •
Part
Number Backset - Hsg Dia - Description Price Each
Spring Latch
11-068 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
$58.40
11-069 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-110 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-111 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-112 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-116 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-113 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-118 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 62.80
Dead Latch
11-085 2 3/8" - 7/8" - Square corner, 1" x 2 1/4"
58.40
11-088 2 3/8" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-104 2 3/8" - 1" - Circular drive in - 605 & 626 nishes only
11-091 2 3/4" - 7/8" - Square corner, 1" x 2 1/4"
11-092 2 3/4" - 7/8" - 1/4" Radius round corner, 1" x 2 1/4"
11-096 2 3/4" - 1" - Square corner, 1 1/8" x 2 1/4"
11-105 2 3/4" - 1" - Circular drive in - 605 & 626 nishes only
11-103 3 3/4" - 1" - Square corner, 1 1/8" x 2 1/4" 62.80
43-005 5" - Backset extension link - require reinforcement when used
in hollow metal door applications 35.10
39-030 Rabbeted latch and strike kit - adapts square corner latches
and 2 3/4" high square corner strikes to 1/2" rabbeted door and
frame preparations.
56.50
Strikes
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
10-001, 10-004, 10-025, 10-026, 10-027 ••••••••••
10-058 • •
Part
Number Lip Length - Description Price Each
10-001 118 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" $6.50
10-001 100 1" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
13.50
10-001 114 1 1/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-001 112 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-001 134 1 3/4" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-001 200 2" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
10-004 1 1/8" - 1/4" Radius round corner, T-strike, box, 1 1/8" x 2 3/4" 10.80
10-025 1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 14.30
10-025 138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 42.40
10-025 112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4" 7.60
10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4" 7.60
10-058 Circular, adjustable, 1 3/4" diameter 10.90
K510-066 Box for ANSI strike 6.60
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
81
Price Book 6
Effective July 9, 2018
AL-11
Plunger Parts, Reinforcements and Adapters, Parts for 2" Doors, Hub,
Frame and Housing Kits — For Locks Manufactured before May, 2003 Parts • AL
Plunger Parts
Available Finishes - Specify for Listed Parts 605 609 612 613 619 622 625 626 643e 626AM
51-037, 51-038, 51-039, 51-040, 51-041 •6•••••••
Part Number Description Price Each
51-037 Plunger unit, inside - AL53
$16.10
51-038 Plunger unit, inside - AL85
51-039 Plunger unit, inside - AL40, AL44, AL50
51-040 Plunger unit, outside - AL40
51-041 Plunger unit, outside - AL44
Parts for 2" Doors
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
• • 6•••••••
Part Number Description Price Each
A700-043 Driver, 2" door $70.20
A700-028* Hub, 2" door, for inside and outside - for locks manufactured
after May 2003 32.90
A700-029* Hub, out., 2" doors - AL70 - for locks manufactured
after May 2003 40.70
A700-030* Hub, out., 2" doors - AL25
A700-033* Full size interchangeable core lever insert, 2" door 7.00
A700-034* Lever insert, 2" door
(SFIC not available for 1 7/8" - 2" door thickness)
* No nish specication required
Reinforcements and Adapters
Part Number Description Price Each
37-001 Metal door reinforcer kit, ts both 7/8" and 1" diameter housings - Specify door thickness, includes A501-567
and A501-565 or A501-566 $38.20
A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings. 19.20
A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8" and 1" diameter housings.
A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch and backset link or to hold latch in metal doors 11.90
A501-878* Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation 0.74
G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 6.70
*Order in multiples of 100
Hub, Frame and Housing Kits — For Locks Manufactured before May, 2003
Part
Number Description Price Each
A700-048
All (except
AL25 & AL70)
1 3/8" - 1 7/8" (2) A700-032 Chassis screws (1) A700-056 Frame, hub
(2) A700-046 Hub (1) A700-057 Housing $84.90
A700-050 2" (2) A700-032 Chassis screws (1) A700-056 Frame, hub
(2) A700-028 Hub (1) A700-057 Housing
87.10
A700-049
AL70
1 3/8" - 1 7/8"
(2) A700-032 Chassis screws (1) A700-056 Frame, hub
(1) A700-046 Hub (1) A700-057 Housing
(1) A700-014 Hub
A700-051 2" (2) A700-032 Chassis screws (1) A700-056 Frame, hub
(2) A700-028 Hub (1) A700-057 Housing
82
ND-Series D-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
AL-12
AL • Parts Miscellaneous Parts, Special Parts
Miscellaneous Parts
Part Number Description Price Each
A100-053 Spring cage, ins. - 4 prong for locks manufactured after May 2002 $65.30
A100-054 Spring cage, out. - 4 prong for locks manufactured after May 2002
A201-370 Cam - AL80 9.50
A301-402 Cam - AL40, AL50, AL53, AL85 9.70
A501-167 Threaded rod for mounting AL170s as double dummy set 16.30
A501-305 Hub plate, ins. 7.70
A501-311 Slide spring 7.30
A501-615 Spindle wedge - AL80, AL85 7.20
A501-721 Cam plug - AL70 22.00
A501-791 Cam spacer - AL70 4.50
A501-874 Hub plate, out. - AL25 11.60
A501-901 Hub plate, out. - AL80, AL85 5.10
A508-597 Spring seat - AL50, AL53, AL70, AL80, AL85
7.30
A590-158 Slide - AL85
A590-159 Slide - AL50, AL53, AL70, AL80
A590-180 Slide, restoring - AL40, AL44
A590-181 Slide, non-restoring - AL10, AL25
A700-003 Spindle sleeve - AL85
A700-004 Hub plate, out. (except AL25, AL80, AL85)
A700-014 Hub, out. - AL70 - for locks manufactured after May 2003 32.90
A700-015 Lever insert, 1 3/8" - 1 7/8" doors - for locks manufactured before May 2002 7.00
A700-016 Hub, out., 1 3/8" – 1 7/8" doors - AL25 32.90
A700-017 Spiral cam - AL70 11.60
A700-036 Spring - AL40, AL44 9.70
A700-046 Hub, 1 3/8" - 1 7/8" doors - for locks manufactured after May 2003* 6.40
A700-047 Interchangeable core lever insert, 1 3/8" - 1 7/8" doors 7.00
A700-056 Frame, hub - for locks manufactured after May 2003 11.70
A700-057 Housing - for locks manufactured after May 2003
A710-001 Spindle & catch, out. (except AL10, AL40) 9.50
A710-004 Spindle & catch, ins.
A710-007 Spindle & hub - AL170 30.00
A710-008 Small Format Interchangeable Core spindle & catch, outside - AL50, AL53, AL70, AL80 25.30
A710-020 Spindle & catch, out. - AL10, AL40 9.50
C503-308 Anchor spring (except AL25) 7.30
C604-273 Rose pin - AL25 1.60
C604-354 Castle nut 17.30
C604-400 Mounting plate - AL170 21.80
Special Parts - Extended Lead Times
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
XQ07-351 • • 6•••••••
Part Number Description Price Each
XQ07-351* 10-025 Strike, 7/8" at lip $41.50
10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 1 3/8", and 1 1/2")
200.00
* Specify lip length
ND-SeriesD-SeriesA-SeriesCYLINDRICAL
83
Price Book 6
Effective July 9, 2018
AL-13
Screws, Screw Packs
Torx Screw Packs, Cylinder Reference Table Parts • AL
Torx Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
C203-311, C203-312 • • 6•••••••
Part Number Description Contents Price Each
C203-311** Latch and strike (4) C503-766 (T-15)
$20.70
C203-312** Latch and ANSI strike (2) C503-766 (T-15)
(2) L583-371 (T-20)
** Torx screw packs are furnished with appropriate T-xx installation tool(s)
Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
B202-517, C203-736, C303-029, C303-421 • • 6•••••••
Part
Number Description Contents Price Each
B202-517 Latch and strike (4) C603-897 $8.10
C203-736 ANSI strike (2) C603-256 6.40
C303-438 Spring cage screws (2) C604-395 4.70
C303-029 Mounting
(4) C603-897
(2) C603-256
(2) C604-395
(1) M504-271
16.10
C303-421 Mounting, AL170
(1) A501-167
(1) A501-171
(1) A501-746
(2) L583-133
(1) M504-271
11.80
Cylinder Reference Table
Available Finishes - Specify for Listed Parts 606 626
21-020, 20-728/XP, 20-528/XP, 12-021
Part Number Cylinder Mechanism Function Design Price Each - Open Price Each - Restricted
21-020 Standard
Standard
Functions All
$62.00 $79.00
91-006 Everest SL (R/B
Keyways only) 79.00
20-728 Primus 137.00
20-728-XP Primus XP
91-706-XP Everest SL Primus XP
(R/B Keyways only) 137.00
20-528 Primus UL437 169.00
20-528-XP Primus UL437 XP
21-021 Standard AL85 92.00 109.00
Screws
Available Finishes - Specify for Listed Parts 605 606 609 612 613 619 622 625 626 643e 626AM
A501-171, A501-746, C603-256, C603-897 • • 6•••••••
Part
Number Description Type Size Price Each
A501-171* Washer, thru bolt - AL170 — —
$1.20 A501-746* Mounting, thru bolt - AL170 POH Machine 1/4" 20 x 2 1/2"
A700-032* Chassis PFH Cross Recess 10-32 x 3/8"
C603-256* ANSI strike PFH Combo 12-24 x 1" 1.00
C603-897* Latch and strike PFH Combo #8 x 3/4" 0.88
C604-395* Spring cage screws PFH Machine 8-32 x 2 1/8" 1.80
L583-133* Mounting surface - AL170 Sheet Metal #8 x 1” 0.90
* Order in multiples of 100
Price Book 6
Effective July 9, 2018
84
ND-Series D-Series A-Series CYLINDRICAL
AL-14
AL Notes
Price Book 6
Effective July 9, 2018
ND-SeriesAL-SeriesA-SeriesCYLINDRICAL
85
D Series
GRADE 1 CYLINDRICAL KNOB LOCK
D-Series Knobs
Exploded View - D53PD
2-1/4"
57 mm
2-3/4"
70 mm
1" dia.
25 mm 2-1/8"
54 mm
1-1/8"
29 mm
Door Preparation
6-Pin cylinder
ANSI strike
Reversible deadlatch
1/2" Throw
Outside knob
Lock chassis
Inside knob
Inside rose
Outside rose
D-1
86
ND-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
D Series
Ordering Procedures
To order Schlage products, descriptive data should be in the same sequence as shown below.
D-2
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + Cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design: Specify only if different from the outside lever design
Inside Fin: Inside lever nish: Specify only if different from the outside nish
Hand: Hand of door: N/A for D lock
Latch: Product latch: Leave blank for standard latch or specify part number if non-standard latch is required.
Strike: Product strike: Leave blank for standard strike or specify part number if non-standard strike is required.
Dr Thk: Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4"
Ext: Extension: Enter for doors 2" or greater. Example: EE=extended equally, EI=extended inside, EO=extended outside,
ED=extended differently
Dim: Dimension: Enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 D53PD ORB 625 PLY 625 - 14-019 10-025 214 EE -KA
ND-SeriesAL-SeriesA-SeriesCYLINDRICAL
87
Price Book 6
Effective July 9, 2018
D-3
D Knobs
Introduction
Product Identification
D 53 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
P = 6-Pin Cylinder
L = Less 6-Pin Cylinder
C = Less 6-Pin Cylinder*
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T =
Full Size Construction Core
Z =
Everest SL 7 pin Cylinder
Function
Lock Series
Finish Codes
and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
629 (US 32) Bright Stainless Steel
630 (US 32D) Satin Stainless Steel
643e (US 11) Aged Bronze
Standard Features
Certification ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike 1 1/4" x 4 7/8", ANSI, Square corner, no box
Backset 2 3/4"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 3/8" – 2"
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
* Used for double cylinder functions.
Table of Contents
Functions D-4
Complete Locks D-5
Options D-7
Latches ........................................D-7
Strikes .........................................D-7
Locks Less Components ........................D-7
Non-Standard Door Thickness .................D-7
Tamper Resistant Torx Screws. . . . . . . . . . . . . . . . . .D-7
Special Functions ..............................D-7
Parts D-8
Knobs and Related Components .............. D-8
Roses ......................................... D-8
Latches and Related Components ............ D-8
Strikes ........................................ D-9
Plunger Parts ................................. D-9
Reinforcements ............................... D-9
Finished Miscellaneous Parts .................. D-9
Special Parts ..................................D-10
Miscellaneous Parts ...........................D-10
Screws ........................................ D-11
Screw Packs .................................. D-11
Torx Screw Packs ............................. D-11
Cylinder Reference Table ...................... D-11
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
Price Book 6
Effective July 9, 2018
88
ND-Series AL-Series A-Series CYLINDRICAL
D Knobs • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door.
SCHLAGE ANSI
Non-Keyed Locks
D10S F75 Passage Latch
Both knobs always unlocked.
SCHLAGE ANSI
Keyed Locks
D53PD F109 Entrance Lock
Turn/push-button locking; pushing
and turning button locks outside knob,
requiring use of key until button is
manually unlocked. Push-button
locking; pushing button locks outside
knob until unlocked by key or by
turning inside knob.
D60PD F88 Vestibule/Classroom Security
Lock
Latch retracted by key from outside
when outside knob is locked by key in
inside knob. Inside knob is always
unlocked.
D66PD F91 Store Lock
Key in either knob locks or unlocks
both knobs.
D70PD F84 Classroom Lock
Outside knob locked and unlocked by
key. Inside knob always unlocked.
D72PD F80 Communicating Lock
Key in either knob locks or unlocks
each knob independently.
D73PD F90 Corridor Lock
Locked or unlocked by key from
outside. Push-button locking from
inside. Turning inside knob or closing
door releases button.
D80PD F86 Storeroom Lock
Outside knob fixed. Entrance by key
only. Inside knob always unlocked.
D80PDEL Electrically Locked (Fail Safe)
Outside knob continuously locked
electrically. Unlocked by key outside
or by switch or power failure.
Auxiliary latch deadlocks latchbolt
when door is closed. Inside knob
always free for immediate exit.
D25D Exit Lock
Blank plate outside. Inside knob
always unlocked.
D40S F76 Bath/Bedroom Privacy Lock
Push-button locking. Can be opened
from outside with small screwdriver.
Turning inside knob or closing door
releases button.
D44S Hospital Privacy Lock
Push-button locking. Unlocked from
outside by turning emergency turn-but-
ton. Turning inside knob or closing
door releases button.
D170 Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
SCHLAGE ANSI
Keyed Locks
D80PDEU Electrically Unlocked (Fail
Secure)
Outside knob continuously locked
until unlocked by key or electric
current. Auxiliary latch deadlocks
latchbolt when door is closed. Inside
knob always free for immediate exit.
D82PD F87 Institution Lock
Both knobs fixed. Entrance by key in
either knob.
D85PD F93 Faculty Restroom Lock
(with Indicator Cylinder)
Outside knob fixed. Entrance by key
only. Push-button in inside knob
activates visual occupancy indicator,
allowing only emergency masterkey
to operate. Turning inside knob or
closing door releases visual
occupancy indicator. Rotation of
inside spanner-button provides lock-
out feature by keeping indicator
thrown.
D-4
Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
ND-SeriesAL-SeriesA-SeriesCYLINDRICAL
89
Price Book 6
Effective July 9, 2018
Complete Locks • D Knobs
D-5
Orbit (ORB) Plymouth (PLY) Tulip (TUL)
Roses
Inside/Outside Rose - Plymouth
Knobs: Plymouth
Size: 2 1/2" dia.
Inside/Outside Rose - Tulip
Knobs: Tulip & Orbit
Size: 2 1/2" dia.
Latches
Deadlatch
13-247
Springlatch
13-248
Anti-Friction Fire Door
Deadlatch, 14-042
Backset Extension Link
43-005
Strikes
ANSI Strike
10-025
T Strike
10-013 Square corner, T-strike,
deep box, fire door latch
10-016
Price Book 6
Effective July 9, 2018
90
ND-Series AL-Series A-Series CYLINDRICAL
D Knobs • Complete Locks
D-6
Function Description
Design and Finishes
Primary Cylinder Adjustments
Available Levers
Available Finishes
ORB PLY TUL
626
605 6606
609 612 625
643e
613 6629
630*
Keyless LD
CD
RD
TD JD
D10S Passage 496 508 526
D25D Exit, blank plate x lever ALL ORB
D40S Privacy 621 633 651 605 6606 609 612 613 625
626 6629 630* 643e
D44S Privacy, hospital
D170 Single dummy 218 224 234
Keyed, Single Cylinder LD RD
TD** JD
D53PD Entrance
723 735 753 -62 37 -34
D70PD Classroom
D73PD Corridor
D80PD Storeroom
D80PD EL/EU Electrically locked or unlocked 1,132 1144 1162
D85PD Faculty Restroom Lock 785 797 815 -92 NOT AVAILABLE
Keyed, Double Cylinder CD RD
TD** JD
D60PD Vestibule
790 802 820 -124 74 -68
D66PD Store
D72PD Classroom Security
D82PD Institution
Secondary
Cylinder
Adjustment
EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS
EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +17
SL Cylinder with Everest B or Everest R keyways +17
PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW)
SINGLE KIL EXAMPLE: 1 EA. D53LD & 1 EA. 20-748(-XP) +137
DOUBLE KIL EXAMPLE: 1 EA. D72CD & 2 EA. 20-748(-XP) +274
SINGLE FSIC EXAMPLE: 1 EA. D53JD & 1 EA. 20-740(-XP) +148
DOUBLE FSIC EXAMPLE: 1 EA. D72JD & 2 EA. 20-740(-XP) +296
* Finish only available in PLY knob
** Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
Price Book 6
Effective July 9, 2018
ND-SeriesAL-SeriesA-SeriesCYLINDRICAL
91
Options • D Knobs
Latches, Strikes, Locks Less Components, Non-Standard Door Thickness,
Tamper Resistant Torx® Screws, Special Functions
Latches
Part Number Backset - Description Lock Adjustment
Spring Latch
13-248 2 3/4" - Square corner, 1 1/8" x 2 1/4" N/C
14-010 3 3/4" - Square corner, 1 1/8" x 2 1/4" +10.40
Deadlatch
14-047 2 3/8" - Square corner, 1 1/8" x 2 1/4" N/C
14-048 2 3/8" - Square corner, 1 x 2 1/4" N/C
13-247 2 3/4" - Square corner, 1 1/8" x 2 1/4" N/C
14-042 2 3/4"" - Anti-friction re door latch
Square corner, 1 1/8" x 2 1/4", 3/4" throw, modied latch prep for anti-friction tongue pivot +176.00
14-028 3 3/4" - Square corner, 1 1/8" x 2 1/4" +10.40
43-005 5" - Backset extension link - require reinforcement when used in hollow metal door applications,
must be used with 2 3/4" backset latches +32.10
Strikes
Part Number Lip Length - Description Lock Adjustment
10-013 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" N/C
1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" +4.50
10-016 1 1/8" - Square corner, T-strike, deep box, re door latch N/C
10-025
1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" N/C
1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" +27.20
1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
K510-066 Box for ANSI strike, must be specied N/C
Tamper Resistant Torx® Screws
Specify/
Part Number Description Lock Adjustment
Torx Screws Screws - Latch and Strike +20.70
Locks Less Components
Description Specify Lock Adjustment
Less each knob LLL for lever design
Example: D53PD LLL/RHO x ATH -20.80
Less each rose LLL for rose design
Example: D53PD RHO x RHO/LLL -14.40
Less springlatch LLL for latch
Example: D40S RHO 605 LLL 10-025 -24.80
Less deadlatch LLL for latch
Example: D53PD SPA 626 LLL 10-025 -33.20
Less strike LLL for strike
Example: D53PD ATH 612 13-047 LLL -4.90
Lock chassis and spring cages only Less all possible components
Example: D53LD LLL 626 LLL LLL, lever chassis
Sum of
deducts
Non-Standard Door Thickness
Description Specify Lock Adjustment
Extended Equally (EE), over 2" – 2 1/2" Door thickness and how door is extended.
Example: 2", ED
+68.40
Extended Differently (ED), over 2" – 2 1/2" +320.00
Note: For door thicknesses not listed, please use the Schlage Innovation Center Process.
Special Functions - Extended Lead Times
Part Number
Function - Description
Base
Lock
Lock Adjustment
(Base Lock)Lock Function “X” Number
D25x80 XC03-543 D25x80 - Blank plate outside, xed knob inside. Key in knob retracts latch. D80 +482.00
D60 XC03-928 D60 - Closed outside knob. D70 +310.00
D70x80 XC07-960 D70x80 - Key locks or unlocks outside knob. Key in xed inside knob retracts latch. D82 +426.00
D25x70 XC11-577 D25x70 - Blank plate outside. Key locks or unlocks inside knob. D70 +482.00
Shaded items are standard components and are
furnished with locks unless otherwise specified.
D-7
92
ND-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
D Knobs • Parts
D-8
Knobs and Related Components,
Roses, Latches and Related Components
Knobs and Related Components
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
04-006 PLY, 04-007 PLY •6•••••6• •
04-006 ORB TUL, 04-007 ORB TUL, 04-030, 04-031, 04-034 •6•••••6•
Part Number Description Price Each
04-006*Closed Lever - ORB PLY TUL $109.00
04-007*Open Lever - ORB PLY TUL
04-030*Full size core knob, driver, retainer (converts PD to JD) - ORB 91.40
04-031*Full size core knob - ORB 77.00
04-034*Full size core knob, core, driver, and retainer (converts PD to RD) - ORB 168.00
C503-403
Cylinder sleeve 11.60
C503-746
C503-940
C603-262
04-033 Full size core driver and retainer 12.70
C603-569 Full size core retainer 4.30
C604-333 Full size core driver, universal 8.50
*Specify part number, knob style, nish. Ex: 04-007 ORB 626 (open lever, Orbit design, 626 nish)
Roses
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
04-001 PLY, 04-002 PLY, C503-775 •6•••••6• •
04-001 TUL, 04-002 TUL •6•••••6•
Part Number Description Price Each
04-001** Outside Rose - PLY TUL $101.00
04-002** Inside Rose - PLY TUL
C503-775 Blank Rose, D25 46.30
** Specify part number & nish. Ex: 04-002 PLY 626 (Plymouth design, 626 nish)
Latches and Related Components
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
14-001, 14-010, 14-047, 14-048, 14-019, 14-042, 14-028, 43-005 •6•••••6• •
39-030 •
Part Number Backset - Description Price Each
Spring Latch
13-248 2 3/4" - Square corner, 1 1/8" x 2 1/4" $87.50
14-010 3 3/4" - Square corner, 1 1/8" x 2 1/4" 105.00
Dead Latch
14-047 2 3/8" - Square corner, 1 1/8" x 2 1/4" 114.00
14-048 2 3/8" - Square corner, 1" x 2 1/4" 114.00
13-247 2 3/4" - Square corner, 1 1/8" x 2 1/4" 87.50
14-042 2 3/4" - Anti-friction Fire Door Latch 1" Square corner, 1 1/8" x 2 1/4",
3/4" throw, modied latch prep for anti-friction tongue pivot 348.00
14-028 3 3/4" - Square corner, 1 1/8" x 2 1/4" 105.00
43-005
5" - Backset extension link - require reinforcement when used in hollow
metal door applications; backset link must be used with 2 3/4" backset
latches
32.10
39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4"
high square corner strikes to 1/2" rabbeted door and frame preparations. 56.40
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Price Book 6
Effective July 9, 2018
ND-SeriesAL-SeriesA-SeriesCYLINDRICAL
93
D-9
Parts • D Knobs
Strikes, Plunger Parts, Reinforcements, Finished Miscellaneous Parts
Strikes
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
10-013, 10-016, 10-025 •6•••••6• •
Part Number Lip Length - Description Price Each
10-013-118 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" $11.50
10-013-112 1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" 16.00
10-016 1 1/8"" - Square corner, T-strike, deep box, 1 1/8" x 2 3/4" 1 1/8"
Use with re door latch 15.20
10-025-1316 1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" 15.20
10-025-138 1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" 42.40
10-025-112 1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
K510-066 Box for ANSI strike 7.00
Finished Miscellaneous Parts
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
C102-522, C102-524, C102-541, C102-542, C102-570, C102-572 •6•••••6• •
Part Number Description Price Each
C102-522 Hub and cap, out (except D80, D80 EL/EU, D82, D85) $91.50
C102-524 Hub and cap, ins (except D82) 68.60
C102-541 Hub and cap, ins - D170 50.20
C102-542 Hub and cap, out - D80 EL/EU 91.50
C102-570 Hub and cap, out - D80, D82, D85 146.00
C102-572 Hub and cap, ins - D82
Plunger Parts
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
04-020, 04-021, 04-022, 04-023, 04-025, 04-026, •6•••••6• •
Part Number Dimension - Door Range - Description Price Each
04-020*443 - 1 3/8" – 2" - Plunger, ins - D40, D44 $81.40
468 - over 2" – 2 1/2", EE - Plunger, ins - D40, D44
04-021*170 - 1 3/8" – 2" - Plunger unit, out - D40 64.10
195 - over 2" – 2 1/2", EE - Plunger unit, out - D40
04-022*170 - 1 3/8" – 2" - Plunger unit, out - D44 79.70
195 - over 2" – 2 1/2", EE - Plunger unit, out - D44
04-023*443 - 1 3/8" – 2" - Plunger unit, ins - D53
64.00
468 - over 2" – 2 1/2", EE - Plunger unit, ins - D53
04-025* 443 - 1 3/8" – 2" - Plunger unit, ins - D73
468 - over 2" – 2 1/2", EE - Plunger unit, ins - D73
04-026* 443 - 1 3/8" – 2" - Plunger unit, ins - D85 147.00
468 - over 2" – 2 1/2", EE - Plunger unit, ins - D85
*Specify part number, dimension, design & nish. Ex: 04-022 170 626
Reinforcements
Part Number Description Price Each
37-001 Metal door reinforcer kit, ts both 7/8" and 1" diameter housings -
Specify door thickness, includes A501-567 and A501-565 or A501-566 $38.20
A501-565 Reinforcer for 1 3/8" thick non-reinforced metal doors. Fits both 7/8"
and 1" diameter housings. 19.20
A501-566 Reinforcer for 1 3/4" thick non-reinforced metal doors. Fits both 7/8"
and 1" diameter housings.
A501-567 3 1/2" Long latch housing sleeve used to reinforce joint between latch
and backset link or to hold latch in metal doors 11.90
A501-878** Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation 0.74
G506-815 1" Long latch housing sleeve to adapt 7/8" housing to 1" bore 6.70
** Order in multiples of 100
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Price Book 6
Effective July 9, 2018
94
ND-Series AL-Series A-Series CYLINDRICAL
D Knobs • Parts
D-10
Special Parts, Miscellaneous Parts
Special Parts - Extended Lead Times
Available Finishes 605 606 609 612 613 625 626 629 630 643e
XQ02-309, XQ03-494, XQ07-351, XN12-012, 38-018 •6•••••6• •
Part Number Description Price Each
XQ02-309 10-013 Strike, 7/8" at lip $39.40
XQ03-494*10-013 Strike, 1 5/8" – 6" lip 165.00
10-013 Strike, 6 1/8" – 12" lip 210.00
XQ07-351*10-025 Strike, 7/8" at lip 41.50
10-025 Strike, lips thru 6" (except 7/8", 1 3/16", 3/8" and 1 1/2") 200.00
XC03-069 Backset Link, range: 5" - 42", specify backset (not adjustable);
NOTE: This extension link must be used with a 2-3/4" backset latch. 738.00
38-018 Thin door extension ring (2 required per lock) 12.80
* Specify lip length
Miscellaneous Parts
Part Number Description Lock Adjustment
A501-167 Threaded rod for mounting D170s as double dummy set $15.40
C100-059 Spindle unit, out and ins - D66 155.00
C100-062 Spindle unit, out - D70, out and ins - D72
C102-540 Hub and frame - D25 51.80
C102-837 Locking plug, out - D73 73.90
C102-840 Key spindle - D40, D44, D53, D60 64.00
C203-034 Spindle and catch, ins (except D60, D66, D72, D80EL/EU, D82) 50.90
C203-376 Plug - D85 16.10
C203-390 Spindle and key cam, out - D70, D72 64.00
C203-391 Spindle and key cam - D60
C203-411 Key spindle and spring - D85 52.40
C203-733 Locking plug - D70, D72
C203-858 Spindle and hammer, ins - D85 64.00
C203-947 Spindle and catch, out - D40, D44 52.40
C203-948 Spindle and catch, out - D53, D60, D73, D80
C303-006 Slide and roller 60.70
C303-400 Spindle and catch, ins - D80EL/EU 57.30
C303-439 AC Rectier 67.40
C503-008** Cotter pin 0.68
C503-019 Slide spring 6.50
C503-308 Anchor spring (except D25, D170) 7.30
C503-314 Slide spring seat 7.10
C503-324 Spindle washer - D60, D70, D72, D85 7.00
C503-334 Plunger hammer - D85 14.90
C503-335 Plunger hammer spring - D85 6.90
C503-339 Key spindle - D80, D82, D85 27.60
C503-359 Key cam - D60 15.00
C503-360 Key cam rider - D60 15.50
C503-361 Key cam pin - D60 6.90
C503-362 Plunger - D60 7.10
C503-368 Key cam sleeve, out - D70, D72 6.90
C503-371 Plunger - D66 6.90
C503-400 Key cam pin - D70, D72 6.90
C503-768 Spacer - D80 EL/EU 3.40
C503-965 Plunger sleeve, out - D40, D44 15.30
C603-500 Housing 14.90
C604-187 Slide catch, restoring - D40, D44, D73, D85
7.20C604-188 Slide catch, non-restoring - D53
C604-191 Slide catch spring - D40, D44, D53, D73, D85
C604-204 Spindle, keyed - D80 EL/EU 27.60
C604-205 Solenoid retaining clip - D80 EL/EU 8.70
C604-273 Rose pin - D25 1.50
C604-312 Anchor (except D25) 7.10
** Order in multiples of 100
ND-SeriesAL-SeriesA-SeriesCYLINDRICAL
95
Price Book 6
Effective July 9, 2018
D-11
Parts • D Knobs
Screws, Screw Packs, Torx Screw Packs, Cylinder Reference Table
Screws
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
A501-171, A501-746, C603-256, C603-897 •6•••••6• •
Part
Number Description
Door
Thickness Type Size Price Each
A501-171* D170, washer — Washer — $1.20
A501-746* D170, mounting screw 1 1/2" – 2" POH Machine 1/4" 20 x 2 1/2" 1.20
C603-256* ANSI strike — PFH Combo 12-24 x 1" 1.00
C603-897* Latch and strike — PFH Combo #8 x 3/4" 0.88
* Order in multiples of 100
Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
B202-517, C303-007, C203-736, C303-028 •6•••••6• •
Part
Number Description Contents Price Each
B202-517 Latch and strike (4) C603-897 $8.10
C303-007 Mounting, D170
(1) A501-171
(1) A501-746
(3) C603-897
9.40
C203-736 ANSI strike (2) C603-256 6.40
C303-028 Mounting, all except D170 (4) C603-897
(2) C603-256 11.80
Torx Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 612 613 625 626 629 630 643e
C203-311, C203-312 •6•••••6• •
Part
Number Description Contents Price Each
C203-311** Latch and strike (4) C503-766 (T-15)
$20.70
C203-312** Latch and ANSI strike (2) C503-766 (T-15)
(2) L583-371 (T-20)
** Torx screw packs are furnished with appropriate T-xx installation tool(s)
Cylinder Reference Table
Available Finishes - Specify for Listed Parts 606 626
21-002, 23-001, 23-002, 23-003-098, 20-748/XP, 20-548/XP, 20-724/XP, 20-524/XP
Part Number
Cylinder
Mechanism Function Design Door Thickness Price Each Price Each - Restricted
23-001 Standard
Standard
Functions All
Standard
62.00 79.00
91-016 Everest SL (R/B
Keyways only)
20-748 Primus 137.00
20-748-XP Primus XP
91-714-XP Everest SL Primus XP
(R/B Keyways only) 137.00
20-548 Primus UL437 169.00
20-548-XP Primus UL437 XP
21-002 Standard
2" - 2 1/2"
62.00 79.00
91-004 Everest SL (R/B
Keyways only) 79.00
20-724 Primus 137.00
20-724-XP Primus XP
91-704-XP Everest SL Primus XP
(R/B Keyways only) 137.00
20-524 Primus UL437 169.00
20-524-XP Primus UL437 XP
23-003 Standard D85 Standard 92.00 109.00
23-003-098 Standard 2" - 2 1/2" 92.00 109.00
Price Book 6
Effective July 9, 2018
96
ND-Series AL-Series A-Series CYLINDRICAL
D Knobs
D-12
Notes
Price Book 6
Effective July 9, 2018
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
97
ND
GRADE 1 CYLINDRICAL LEVERED LOCK
ND-1
Outside Lever
6-pin Cylinder Outside Spring Cage
Chassis/Spring Cage Attachment Screws
Lock Chassis
Plunger Assembly
Anti Rotation Plate
Inside Spring Cage
Outside Rose
Mounting Screws
Inside Rose
Inside Lever
Button
ANSI Strike
Reversible Deadlatch
1/2” Throw
98
D-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
ND
Ordering Procedures
To order Schlage products, descriptive data should be in the same sequence as shown below.
ND-2
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + Cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design: Specify only if different from the outside lever design
Inside Fin: Inside lever nish: Specify only if different from the outside nish
Hand: Hand of door: N/A for ND lock
Latch: Product latch: Leave blank for standard latch or specify part number if non-standard latch is required.
Strike: Product strike: Leave blank for standard strike or specify part number if non-standard strike is required.
Dr Thk: Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8", 214=2 1/4"
Ext: Extension: Enter for doors 2 1/8" or greater. Example: EE=extended equally, EI=extended inside, EO=extended
outside, ED=extended differently
Dim: Dimension: Enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 ND53PD RHO 622 OME - - 13-247 10-025 214 EE 138 KA
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
99
Price Book 6
Effective July 9, 2018
Table of Contents
Functions ND-4
Complete Locks ND-7
Options ND-9
Latches ..................................... ND-9
Strikes ...................................... ND-9
Locks Less Components ..................... ND-9
Non-Standard Door Thickness .............. ND-9
Indicator Rose ..............................ND-10
Special Functions ...........................ND-10
Allegion Connect ............................ND-10
School Upgrade Kits ........................ ND-11
Conversion Guide ...........................ND-12
Parts ND-14
Levers ......................................ND-14
Spring Cages ................................ND-15
Conversion Kits .............................ND-15
Roses .......................................ND-16
Buttons / Plunger Assemblies ...............ND-16
Strikes ......................................ND-16
Cylinder Reference Table .................... ND-17
Tail Pieces .................................. ND-17
Key Assemblies ............................. ND-17
Miscellaneous Parts ......................... ND-18
Special Parts ................................ ND-18
Hollow Metal Door Reinforcements .........ND-19
Screws ...................................... ND-19
Screw Packs, Standard ...................... ND-19
Torx Screw Packs ........................... ND-19
Allegion Connect Harnesses .................ND-20
Complete Cylinders See Cylinders Section
How To Order Forms & Example
ND Levers
Introduction
Product Identification
ND 53 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
P = 6-Pin Cylinder
L = Less 6-Pin Cylinder
C = Less 6-Pin Cylinder*
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T =
Full Size Construction Core
B = Less SFIC
BDC = Disposable SFIC
G = Everest 29 Patented SFIC
H = Construction SFIC
Z = Everest SL 7 pin Cylinder
Function
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
622 (US 19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chrome
626AM Antimicrobial Coating
on Satin Chromium
643e (US 11) Aged Bronze
Standard Features
Certification ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 1" housing diameter, 1/2" throw
Strike 1 1/4" x 4 7/8", ANSI Square corner, no box
Backset 2 3/4"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 5/8" – 2 1/8" for all functions except ND85; 1 3/4" – 2" for ND85
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
* Used for double cylinder functions.
BAA/ARRA
Contact your local SSC or
Sales Rep. for ordering details
ND-3
Price Book 6
Effective July 9, 2018
100
D-Series AL-Series A-Series CYLINDRICAL
ND Levers • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door.
SCHLAGE ANSI
Non-Keyed Locks
SCHLAGE ANSI
Keyed Locks
Safe School Locks
ND10S F75 Passage Latch
Both levers always unlocked.
Inside lever is always free for
immediate egress. Also available with
Request to Exit (RX) function.
ND50PD F82 Entrance/Office Lock
Push-button locking. Push-button
locks outside lever until unlocked with
key or by turning inside lever. Inside lever
is always free for immediate egress.
ND53PD F109 Entrance Lock
Turn/push-button locking; pushing and turn-
ing button locks outside lever, requiring use of
key until button is manually unlocked. Push-
button locking; pushing button locks outside
lever until unlocked by key or by turning inside
lever. Inside lever is always free for immediate
egress.
ND60PD F88 Vestibule Lock
Latch retracted by key from outside
when outside lever is locked by key in
inside lever. Inside lever always unlocked
for immediate egress.
ND66PD F91 Store Lock
Key in either lever locks or unlocks
both levers.
ND70PD F84 Classroom Lock
Outside lever locked and unlocked by
key. Inside lever always unlocked for
immediate egress.
ND73PD F90 Corridor Lock
Locked or unlocked by key from outside.
Push-button locking from inside. Turning
inside lever or closing door releases button.
When outside lever is locked by key it can
only be unlocked by key. Inside lever always
unlocked for immediate egress.
ND12D F89 Exit Lock
Outside lever always fixed. Inside
lever always unlocked for immediate
egress. Also available with Request to
Exit (RX) function.
ND12DEL Electrically Locked (Fail Safe)
Outside lever continuously locked
electrically. Unlocked by switch or power
failure. Auxiliary latch deadlocks latchbolt
when door is closed. Inside lever always
always unlocked for immediate egress.
Also available with Request to Exit (RX)
function.
Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
ND12DEU Electrically Unlocked (Fail Secure)
Outside lever continuously locked
until unlocked by electric current.
Auxiliary latch deadlocks latchbolt
when door is closed. Inside lever always
unlocked for immediate egress. Also avail-
able with Request to Exit (RX) function.
ND25D F89 Exit Lock
Blank plate outside. Inside lever
always unlocked for immediate egress.
ND40S F76 Bath/Bedroom Privacy Lock
Push-button locking. Can be opened
from outside with small screwdriver.
Turning inside lever or closing door
releases button. Inside lever is always
free for immediate egress.
ND44S Hospital Privacy Lock
Push-button locking. Unlocked
from outside by turning emergency
turn-button. Turning inside lever or
closing door releases button. Inside lever
is always free for immediate egress.
ND170 Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
ND75PD F110 Classroom Security Lock
Key in either lever locks or unlocks
outside lever. Inside lever always
unlocked for immediate egress.
ND-4
Price Book 6
Effective July 9, 2018
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
101
Functions • ND Levers
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade
1, UL Listed for 3-hour fire door.
SCHLAGE ANSI
Keyed Locks SCHLAGE ANSI
Vandlgard Functions: Designed to disengage outside spindle
from latch when in locked condition.
Inside lever is always free for
immediate egress.
Safe School Locks
Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
ND80PD F86 Storeroom Lock
Outside lever fixed. Entrance by key only.
Inside lever always unlocked for
immediate egress. Also available with
Request to Exit (RX) function.
ND80PDEL Electrically Locked (Fail Safe)
Outside lever continuously locked
electrically. Unlocked by key outside
or by switch or power failure.
Auxiliary latch deadlocks latchbolt
when door is closed. Inside lever
always unlocked for immediate egress.
Also available with Request to Exit
(RX) function.
ND80PDEU Electrically Unlocked (Fail Secure)
Outside lever continuously locked
until unlocked by key or electric
current. Auxiliary latch deadlocks
latchbolt when door is closed. Inside
lever always unlocked for immediate
egress. Also available with Request to
Exit (RX) function.
ND82PD F87 Institution Lock
Both levers fixed. Entrance by key in
either lever.
ND91PD F82 Entrance/Office Lock
Push-button locking. Push-button
disengages outside lever until unlocked
with key or by turning inside lever.
ND92PD F109 Entrance Lock
Turn/push-button locking; pushing and
turning button disengages outside lever,
requiring use of key until button is
manually unlocked. Push-button locking;
pushing button disengages outside lever
until unlocked by key or by turning
inside lever.
ND93PD F88 Vestibule Lock
Latch retracted by key from outside when
outside lever is disengaged by key in inside
lever. Inside lever is always unlocked for
immediate egress.
ND94PD F84 Classroom Lock
Outside lever disengaged and unlocked
by key. Inside lever always unlocked for
immediate egress.
ND96PD F86 Storeroom Lock
Outside lever always disengaged.
Entrance by key only. Inside lever always
unlocked for immediate egress. Also avail-
able with Request to Exit (RX).
ND96PDEL Electrically Locked (Fail Safe)
Outside lever continuously
disengaged electrically. Unlocked by
key outside or by switch or power failure.
Auxiliary latch deadlocks latchbolt when
door is closed. Inside lever always free for
immediate egress. Also available with
Request to Exit (RX).
ND96PDEU Electrically Unlocked
(Fail Secure)
Outside lever continuously disengaged
until unlocked by key or electric current.
Auxiliary latch deadlocks latchbolt when
door is closed. Inside lever always free for
immediate egress. Also available with
Request to Exit (RX).
ND85PD F93 Faculty Restroom Lock
Outside lever fixed. Entrance by key
only. Push-button in inside lever acti-
vates visual “occupancy” indicator,
allowing only emergency master key
to operate. Turning inside lever or
closing door releases visual occupancy
indicator. Rotation of inside spin-
ner-button by spanner key provides
lock-out feature by keeping indicator
thrown. Inside lever is always free for
immediate egress.
ND95PD F110 Classroom Security Lock
Key in either lever disengages or
unlocks outside lever. Inside lever always
unlocked for immediate egress.
ND97PD F90 Corridor Lock
Locked or unlocked by key from outside.
Push-button locking from inside. Turning
inside lever or closing door releases
button. When outside lever is locked by
key it can only be unlocked by key. Inside
lever is always unlocked for immediate
egress.
ND-5
Price Book 6
Effective July 9, 2018
102
D-Series AL-Series A-Series CYLINDRICAL
Specialty Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 1, UL Listed for 3-hour fire door.
SCHLAGE ANSI
Keyed Locks
ND25 x 80PD Storeroom Exit Lock
Blank plate outside. Key in fixed inside lever
retracts latch. Specify per XN12-005.
ND25 x 70PD Classroom Exit Lock
Blank plate outside. Key locks or unlocks
inside lever. Specify per XN12-004.
ND30D F77 Patio Lock
Push button locking. Turning inside
lever or closing door releases button,
preventing a lock-out. Inside lever
always unlocked for immediate egress.
Specify per XN12-007.
Time Out Lock
Caretaker Side
Pushing and holding button will lock
inside lever (detention side) until
released. Lever always retracts latch.
Detention Side
Lever retracts latch unless outside
button is depressed. Vandlgard allows
inside spindle to disengage from latch
when locked.
ND60PD Vestibule with Closed Outside Lever
Same as ND60 except outside lever is closed.
Inside lever always unlocked for immediate
egress. Specify per XN12-001.
ND70 x 80PD
Classroom by Storeroom Lock
Key locks and unlocks outside lever.
Key in fixed inside lever retracts latch.
Specify per XN12-006.
ND72PD F80 Communicating Lock
Key in either lever locks and unlocks
own lever. Specify per XN12-002.
ND72PD Vandlgard Communicating Lock
Communicating, ND72, lock with
Vandlgard. Key in either lever locks
and unlocks own lever. Both inside
and outside levers are clutching.
Specify per XN12-003.
SCHLAGE ANSI
Non-Keyed Locks
Vandlgard Functions: Designed to disengage outside spindle
from latch when in locked condition.
Inside lever is always free for
immediate egress.
SCHLAGE ANSI
Keyed Locks
ND45
Pricing for all Speciality functions can be found on ND-10
ND Levers • Functions
ND-6
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
103
Price Book 6
Effective July 9, 2018
Athens (ATH)
Latitude (LAT)
Omega (OME)
Longitude (LON)
Sparta (SPA)
Broadway (BRW)
Rhodes (RHO)
Boardwalk (BWK)
Tubular (TLR)
Complete Locks • ND Levers
Commercial Lever Suite
ND Levers L Lock Levers 98/99 Exit AL Lock S Lock F Lock
Athens 07 07 Jupiter Jupiter
Omega Omega 16 Omega
Sparta 17 17 Neptune Neptune Jazz
Rhodes 06 06 Saturn Saturn Elan
Tubular 03 03
Latitude Latitude Latitude Latitude
Longitude Longitude Longitude
Broadway
Boardwalk
Latches
Deadlatch, 13-247 Springlatch, 13-248 Anti-Friction Fire Door
Deadlatch, 14-042
Backset Extension Link,
43-005
Strikes
ANSI Strike,
10-025 T Strike,
10-013 Square corner,
T-strike, deep box,
fire door latch,
10-016
Roses
Inside/Outside Rose,
03-042 RHO
Levers: ATH, SPA, RHO, TLR,
LAT, LON, BRW, BWK
Size: 3 7/16" dia.
Omega Inside/Outside
Rose, 03-042 OME
Levers: OME
Size: 3 7/16" dia.
Blank Outside Rose,
N523-002
Outside Plate for:
ND25, ND25X70 & ND25X80
Size: 3 1/2" dia.
Indicator Rose (Rhodes)
XN12-035
Functions: ND75, ND95,
ND60 & ND93
Levers: ATH, SPA, RHO, TLR,
LAT, LON, BRW, BWK
Size: 3 7/16" dia.
Finish: 626 only
Indicator Rose (Omega)
XN12-045
Functions: ND75, ND95,
ND60 & ND93
Levers: OME
Size: 3 7/16" dia.
Finish: 626 only
ND-7
104
D-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
Function Decription
Designs and Finishes
PRIMARY CYLINDER ADJUSTMENTS
AVAILABLE LEVERS
AVAILABLE FINISHES
ATH OME RHO SPA TLR
LAT LON BRW BRK
626
605 606
612 619
622
625 643e
613
6626AM
Keyless
LD
CD RD
TD* JD BD
BDC GD HD* LD-SAR
LD-CO6
JD-SAR
JD-CO6
JD-YA6
JD-MED
JD-CO7
JD-YA7
ND10S Passage 424 436 454
ND12D Exit, lever x lever
ND12D EL/EU Electrically locked or unlocked 660 672 690 ATH OME SPA RHO TLR ATH SPA
RHO TLR RHO
ND25D Exit, blank plate x lever 424 436 454
605 606 612 619 622
625 626 643e 613 6626AM
6605 6606 6612 6613
6619 6622 6625 626
6643e 6626AM
ND40S Privacy 488 500 518
ND44S Privacy, hospital
ND170 Single dummy 182 188 198
Keyed, Single Cylinder
LD
CD
RD
TD* JD BD
BDC GD HD LD-SAR
LD-CO6
JD-SAR
JD-CO6
JD-YA6
JD-MED
JD-CO7
JD-YA7
ND50PD Entrance/Ofce
578 590 608 -62 37 -34 N/C 82 43 -62 -34 -34
ND53PD Entrance
ND70PD Classroom
ND73PD Corridor
ND80PD Storeroom
ND85PD Faculty Restroom Lock 701 713 731 -92 NOT AVAILABLE
ND91PD Vandlgard® Entrance/Ofce
632 644 662
-62 37 -34 N/C 82 43 -62 -34 -34
ND92PD Vandlgard® Entrance
ND94PD Vandlgard® Classroom
ND96PD Vandlgard® Storeroom
ND97PD Vandlgard® Corridor
ND80PD EL/EU Electrically locked or unlocked 774 786 804
ND96PD EL/EU Vandlgard® Electrically locked
or unlocked 850 862 880
Keyed, Double Cylinder
LD
CD
RD
TD JD BD
BDC GD HD LD-SAR
LD-CO6
JD-SAR
JD-CO6
JD-YA6
JD-MED
JD-CO7
JD-YA7
ND60PD Vestibule
688 700 718
-124 74 -68 N/C 164 86 -124 -68 -68
ND66PD Store
ND75PD Classroom Security
ND82PD Institution
ND93PD Vandlgard® Vestibule Class-
room Security 741 753 771
ND95PD Vandlgard® Classroom Security
Secondary
Cylinder
Adjustments
EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS
EVEREST D & T FAMILY & RESTRICTED KEYWAYS
(QUAD, NUMBERED, REVERSE +17
SL Cylinder with Everest B or Everest R keyways +17
PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPARATELY (PRICES BELOW)
SINGLE KIL EXAMPLE: 1 EA. ND53LD & 1 EA. 20-765(-XP) +137
DOUBLE KIL EXAMPLE: 1 EA. ND75CD & 2 EA. 20-765(-XP) +274
SINGLE FSIC EXAMPLE: 1 EA. ND53JD & 1 EA. 20-740(-XP) +148
DOUBLE FSIC EXAMPLE: 1 EA. ND75JD & 2 EA. 20-740(-XP) +296
* Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
ND Levers • Complete Locks
ND-8
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
105
Price Book 6
Effective July 9, 2018
Latches
Part Number Backset - Description Lock Adjustment
Spring Latch*
13-248 2 3/4" - Square corner, 1 1/8" x 2 1/4" N/C
14-010 3 3/4" - Square corner, 1 1/8" x 2 1/4" +10.40
Deadlatch*
14-047 2 3/8" - Square corner, 1 1/8" x 2 1/4" N/C
14-048 2 3/8" - Square corner, 1 x 2 1/4" N/C
13-247 2 3/4" - Square corner, 1 1/8" x 2 1/4" N/C
14-042 2 3/4" - Anti-friction re door latch 3/4" throw, modied latch prep for anti-friction tongue pivot +176.00
14-028 3 3/4" - Square corner, 1 1/8" x 2 1/4" +10.40
43-005 5" - Backset extension link2 - use with 2 3/4" backset latches +32.10
* All latch extensions require reinforcement when used in hollow metal door applications
Non-Standard Door Thickness*
Description Specify Lock Adjustment
1 3/8" thick doors - 2 chassis spacers
(XN12-012) required; see ND-12
Door thickness and how door is extended.
Example: 3", EO
+57.60
Extended Inside (EI)**, over 2" – 6" +296.00
Extended Outside (EO)**, over 2" – 6"
Extended Equally (EE)**, over 2 1/8" – 6" +487.00
Extended Differently (ED)**, over 2" – 6"
*If not specified orders will default to EE
** For ND85, EE range is from over 2” to 6”. EI, EO, and ED ranges are from over 1 7/8” to 6”
Locks Less Components
Description Specify Lock Adjustment
Less each lever LLL for lever design
Example: ND53PD LLL/RHO x ATH -22.70
Less each rose LLL for rose design
Example: ND53PD RHO x RHO/LLL -13.00
Less springlatch LLL for latch
Example: ND40S RHO 605 LLL 10-025 -24.20
Less deadlatch LLL for latch
Example: ND53PD SPA 626 LLL 10-025 -31.70
Less strike LLL for strike
Example: ND53PD ATH 612 13-047 LLL -4.40
Lock chassis and spring cages only Less all possible components
Example: ND53LD LLL 626 LLL LLL, lever chassis Sum of
deducts
Strikes
Part Number Lip Length - Description Lock Adjustment
10-013 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4" N/C
1 1/2" - Square corner, T-strike, box, 1 1/8" x 2 3/4" +4.50
10-016 1 1/8" - Square corner, T-strike, deep box, re door latch N/C
10-025
1 3/16" - ANSI, no box, 1 1/4" x 4 7/8" N/C
1 3/8" - ANSI, no box, 1 1/4" x 4 7/8" +27.20
1 1/2" - ANSI, no box, 1 1/4" x 4 7/8"
K510-066 Box for ANSI strike, must be specied N/C
Latches, Strikes, Lock Less Components, Non-Standard Door Thickness Options • ND Levers
ND-9
Shaded items are standard components and are
furnished with locks unless otherwise specified.
106
D-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
Indicator Rose (“LOCK” printed on inside rose)
Part Number Description Lock Adjustment
XN12-035* Indicator Rose - Rhodes +32.90
XN12-045* Indicator Rose - Omega
*Intended for the inside rose on double cylinder applications
Available in 626 only - other finishes receive a standard rose.
75 & 95 - Standard Option - Lock adjustment does not apply; standard rose is available
60 & 93 - Optional - Lock adjustment does apply
Miscellaneous Lock Options
Specify/
Part Number
Description Lock Adjustment
8AT Tactile Lever - Athens
+44.60**
8RO Tactile Lever - Rhodes
8SP Tactile Lever - Sparta
8TR Tactile Lever - Tubular
8BK Tactile Lever - Boardwalk
8BY Tactile Lever - Broadway
8LT Tactile Lever - Latitude
8LN Tactile Lever - Longitude
XN13-052*** Break-Away Lever - Rhodes KIL (P,L,C,Z)
320.00
XN13-054*** Break-Away Lever - Rhodes FSIC (R,J,T)
XN13-053*** Break-Away Lever - Rhodes SFIC (B,BDC,G,H)
XN13-145*** Break-Away Lever - Rhodes Closed
Torx Screws Screws - Latch and Strike +20.70
RX Request to Exit Feature (Available on ND10, ND12, ND12EL/EU, ND80, ND80EL/EU, ND96, & ND96EL/EU functions)
Ready to be used in a Normally Open or Normally Closed application. +72.50
XN12-307*** Lead Lining +617.00
** Per lever
*** Break-Away levers have extended lead times
The following secure functions are available with breakaway options for the exterior lever (When ordered, the correct lever must be identified for the
functions – Closed, KIL, FSIC, SFIC): ND12, ND12EL/EU, ND30, ND50, ND53, ND60 (for both keyed and closed levers), ND66, ND70, ND72, ND73, ND75,
ND80, ND80EL/EU, ND82, ND91, ND92, ND93, ND94, ND95, ND96, ND96EL/EU, ND97
Interior breakaway levers must be ordered via the following process – Lock(s) are ordered Less Lever for the interior lever and breakaway lever(s) are
ordered separately. Applicable functions include: ND66, ND70X80, ND72, ND82
Special Functions - Extended Lead Times
Part Number
Function - Description
Base
Lock
Lock Adjustment
(Base Lock)
Lock Function “X” Number
ND25x80 XN12-005 ND25x80 - Blank plate outside, xed lever inside. Key in lever retracts latch. ND80 414.00
ND70x80 XN12-006 ND70x80 - Key locks or unlocks outside lever. Key in xed inside lever retracts latch. ND82 381.00
ND25x70 XN12-004 ND25x70 - Blank plate outside. Key locks or unlocks inside lever. ND70 414.00
ND60 XN12-001 ND60 - Closed outside lever. ND70 481.00
ND72 XN12-002 ND72 - Double cylinder communicating lock. ND70 481.00
ND30D XN12-007 ND30D - Patio lock. ND40S 442.00
ND72 XN12-003 ND72 - Vandlgard® levers on inside and outside. ND94 504.00
ND45 XN12-317 ND45 - Time out lock. ND91LD 333.00
ND Levers • Options
ND-10
Tactile Options
Typical pattern for 8AT, 8LT, 8LN, 8RO, 8SP Typical pattern for 8BK, 8BW, 8TR
Price Book 6
Effective July 9, 2018
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
107
School Upgrade Kits
School Upgrade Kits
Part Number Description All Designs and Finishes
Classroom to Corridor
40-300 KIT, ND70 TO 73 CONVERSION $99.90
40-309 KIT, ND94 TO 97 CONVERSION 151.00
Order Example: 40-300 TLR 613
Classroom to Classroom Security
40-301 KIT, ND70 TO 75 CONVERSION, KIL
$211.00
40-302 KIT, ND70 TO 75 CONVERSION, FSIC
40-303 KIT, ND70/60 TO 75 CONVERSION, SFIC
40-304 6KIT, ND70 TO 75 CONVERSION, KIL SAR
40-305 6KIT, ND70 TO 75 CONVERSION, FSIC SAR
40-306 6KIT, ND70 TO 75 CONVERSION, FSIC YA6
40-307 6KIT, ND70 TO 75 CONVERSION, FSIC CO6
40-310 KIT, ND94 TO 95 CONVERSION, KIL
263.00
40-311 KIT, ND94 TO 95 CONVERSION, FSIC
40-312 KIT, ND94/93 TO 95 CONVERSION, SFIC
40-313 6KIT, ND94 TO 95 CONVERSION, KIL SAR
40-314 6KIT, ND94 TO 95 CONVERSION, FSIC SAR
40-315 6KIT, ND94 TO 95 CONVERSION, FSIC YA6
40-316 6KIT, ND94 TO 95 CONVERSION, FSIC CO6
Order Example: 40-312 RHO 626
Vestibule to Classroom Security
40-308 KIT, ND60 TO 75 CONVERSION $130.00
40-303 KIT, ND70/60 TO 75 CONVERSION, SFIC 211.00
40-317 KIT, ND93 TO 95 CONVERSION 181.00
40-312 KIT, ND94/93 TO 95 CONVERSION, SFIC 263.00
Order Example: 40-303 SPA 606
Classroom/Classroom Security to Entrance/Storeroom
40-325 KIT, ND70, ND94 TO ND50 CONVERSION
$99.90
40-326 KIT, ND75, ND95 TO ND50 CONVERSION
40-327 KIT, ND70, 94 to ND80 CONVERSION
40-329 KIT, ND75, ND95 TO ND80 CONVERSION
40-332 KIT, ND70, ND94 to ND91 CONVERSION
151.00
40-330 KIT, ND75, ND95 to ND91 CONVERSION
40-328 KIT, ND70, ND94 to ND96 CONVERSION
40-331 KIT, ND75, ND95 to ND96 CONVERSION
Note: Order Example - 40-332 RHO 626
+
+
+
+
+
+
+
+
+
+
+ +
SFIC ONLY
Options • ND Levers
ND-11
Price Book 6
Effective July 9, 2018
108
D-Series AL-Series A-Series CYLINDRICAL
ND-12
ND Levers • Conversion Guide
Conversion Guide
Lock Structure Function
Outside Spring Cage Inside Spring Cage Levers - see chart
Original New Original New Outside Inside
Non-Keyed Locks
ND10 N123-043 N523-218 N123-032 N523-221 Closed Closed
ND12 N123-022 N523-218 N123-032 N523-221 Closed Closed
ND25 - - N123-032 N523-221 - Closed
ND170 - - 63-104 N523-223 - Closed
Non-Keyed w/ Push
Button
ND30* N123-022 N523-218 N123-032 N523-221 Closed Push Button
ND40* N123-022 N523-218 N123-032 N523-221 Privacy Push Button
ND44** N123-022 N523-218 N123-032 N523-221 Privacy Push Button
ND45* N123-022 N523-218 N123-032 N523-221 Privacy Closed
Single Cylinder Locks
ND60 N123-022 N523-218 N123-021 N523-222 Closed Cylinder
ND70 N123-022 N523-218 N123-032 N523-221 Cylinder Closed
ND80 N123-022 N523-218 N123-032 N523-221 Cylinder Closed
ND25X80 - - N123-021 N523-222 - Cylinder
ND25X70 - - N123-021 N523-222 - Cylinder
ND94 N123-022 N523-218 N123-032 N523-221 Cylinder Closed
ND96 N123-022 N523-218 N123-032 N523-221 Cylinder Closed
Single Cylinder w/ Push
Button
ND50* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button
ND53* N123-022 N523-218 N123-032 N523-221 Cylinder Push & Turn Button
ND73* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button
ND85* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button
ND91* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button
ND92* N123-022 N523-218 N123-032 N523-221 Cylinder Push & Turn Button
ND97* N123-022 N523-218 N123-032 N523-221 Cylinder Push Button
Double Cylinder Locks
ND60 N123-022 N523-218 N123-021 N532-222 Cylinder Cylinder
ND66 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
ND75 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
ND82 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
ND70X80 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
ND72 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
ND93 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
ND95 N123-022 N523-218 N123-021 N523-222 Cylinder Cylinder
Electried
ND12EL N123-022 N523-218 N123-032 N523-221 Closed Closed
ND12EU N123-022 N523-218 N123-032 N523-221 Closed Closed
ND80EL N123-022 N523-218 N123-032 N523-221 Cylinder Closed
ND80EU N123-022 N523-218 N123-032 N523-221 Cylinder Closed
ND96EL N123-022 N523-218 N123-032 N523-221 Cylinder Closed
ND96EU N123-022 N523-218 N123-032 N523-221 Cylinder Closed
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
109
Price Book 6
Effective July 9, 2018
ND-13
Conversion Guide • ND Levers
Lever Conversion
Lever Type Original New Available Designs**
Closed 03-030 03-230 ATH, RHO, SPA, TLR, OME
Privacy 03-031 03-231 ATH, RHO, SPA, TLR, OME
Push or Push & Turn Button 03-031 03-233 ATH, RHO, SPA, TLR, OME
Cylinder - Schlage KIL (P,L) 03-031 03-231 ATH, RHO, SPA, TLR, OME
Cylinder - Schlage FSIC (R,J,T) 03-032 03-232 ATH, RHO, SPA, TLR, OME
Cylinder - Schlage SFIC (B, BDC, G, H) 03-000 03-200 ATH, RHO, SPA, TLR, OME
Cylinder - CR* KIL (L-CO6) - 03-234 ATH, RHO, SPA, TLR
Cylinder - CR* FSIC (J-CO6) 03-066 03-266 ATH, RHO, SPA, TLR
Cylinder - CR* 7-pin FSIC (J-CO7) - 03-235 RHO
Cylinder - Medeco 31 (J-YA6) 03-055 03-255 ATH, RHO, SPA, TLR
Cylinder - Medeco 32 (J-MED) - 03-237 ATH, RHO, SPA, TLR
Cylinder - Sargent KIL (L-SAR) 03-044 03-244 ATH, RHO, SPA, TLR
Cylinder - Sargent FSIC (J-SAR) 03-077 03-277 ATH, RHO, SPA, TLR
Cylinder - Yale FSIC (J-YA6) 03-055 03-255 ATH, RHO, SPA, TLR
Cylinder - Yale 7-pin FSIC (J-YA7) - 03-236 RHO
Cylinder - Best 03-000 03-200 RHO, SPA, ATH, TLR, OME
CR*: Corbin Russwin
Available Designs**: ATH=Athens, RHO=Rhodes, SPA=Sparta, TLR=Tubular, OME=Omega
Spring Cage Conversion
Cylinder Format
Outside Spring Cages Inside Spring Cages
Original New Original New
PD, ZD, LD, JD, RD N123-022
N523-218
N123-021
N523-222
BDC, BD, GD, HD N123-056 N123-057
LD SAR , LD CO6 N123-064 N123-067
JD C06, JD SAR, JD CO7 N123-066 N123-069
JD YA6, JD YA7, JD MED N123-065 N523-224 N123-068 N523-225
Button Conversion
Original New
Push N523-000 N523-209
Push & Turn Button N523-001 N523-210
85 Function N523-124 N523-211
Plunger Assembly Conversion
Original New
Push and Turn Button Plunger Bar (ND53, ND91) N123-017 N123-085
Push Button Plunger Bar (ND30,ND40,ND44,ND50,ND73,ND91,ND97) N123-028 N123-086
Push Button Plunger Bar (ND85) 24071920 N123-087
Tailpiece Kits
SCH-FSIC N523-127 SCH-SFIC N523-091
LD SAR 09-060 LD CO6 10-140
JD YA6 09-061 JD CO7 10-141
JD CO6 09-062 JD YA7 10-142
JD SAR 09-063 JD MED 10-143
110
D-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
ND Levers • Parts
Levers
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
••••••••• •
Part Number* Description Price Each
New Product beginning February 2017
03-230 Lever - Closed; ATH, RHO, SPA, TLR, OME
$132.00
03-233 Lever - Push or Push & Turn Button; ATH, RHO, SPA, TLR, OME
03-231 Lever - Cylinder - Schlage KIL (P,L,C,Z); ATH, RHO, SPA, TLR, OME
03-232 Lever - Cylinder - Schlage FSIC (R,J,T); ATH, RHO, SPA, TLR, OME
03-200 Lever - Cylinder - Schlage SFIC (B,BDC,G,H); ATH, RHO, SPA, TLR, OME
03-234 Lever - Cylinder - CR KIL (L-CO6); ATH, RHO, SPA, TLR
245.00
03-266 Lever - Cylinder - CR FSIC (J-CO6); ATH, RHO, SPA, TLR
03-235 Lever - Cylinder - CR 7-pin FSIC (J-CO7); RHO
03-255 Lever - Cylinder - Medeco 31 (J-YA6); ATH, RHO, SPA, TLR
03-237 Lever - Cylinder - Medeco 32 (J-MED); ATH, RHO, SPA, TLR
03-244 Lever - Cylinder - Sargent KIL (L-SAR); ATH, RHO, SPA, TLR
03-277 Lever - Cylinder - Sargent FSIC (J-SAR); ATH, RHO, SPA, TLR
03-255 Lever - Cylinder - Yale FSIC (J-YA6); ATH, RHO, SPA, TLR
03-236 Lever - Cylinder - Yale 7-pin FSIC (J-YA7); RHO
Original Product**
03-030 Lever - Closed; ATH, RHO, SPA
132.00
03-031 Lever - Cylinder - Schlage Open (P,L,C,Z); ATH, RHO, SPA
03-032 Lever - Cylinder - Schlage FSIC (R,J,T); ATH, RHO, SPA
03-000 Lever - Cylinder - Schlage SFIC (B,BDC,G,H); ATH, RHO, SPA
*Specify part number and nish. Ex: 03-231 ATH 626
** All lever service items for original product supporting Non-SCHLAGE cores and TLR and OME need to convert to the new product.
New Lever Options
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
••••••••• •
Part Number Description Price Each
Sufx Design Design Code
$132.00
47258044 BOARDWALK BRK
47258056 BOARDWALK BRK
47258052 BOARDWALK BRK
47258048 BOARDWALK BRK
47258040 BOARDWALK BRK
47258043 CLOSED BROADWAY BRW
47258055 BUTTON BROADWAY BRW
47258051 RD, JD, TD BROADWAY BRW
47258047 PD, ZD, LD, CD BROADWAY BRW
47258039 BDC, BD, GD, HD BROADWAY BRW
47258045 LATITUDE LAT
47258057 LATITUDE LAT
47258053 LATITUDE LAT
47258049 LATITUDE LAT
47258041 LATITUDE LAT
47258046 LONGITUDE LON
47258058 LONGITUDE LON
47258054 LONGITUDE LON
47258050 LONGITUDE LON
47258042 LONGITUDE LON
47260554 BOARDWALK 8BK
$176.60
47260542 BOARDWALK 8BK
47260546 BOARDWALK 8BK
47260550 BOARDWALK 8BK
47260538 BOARDWALK 8BK
47260553 BROADWAY 8BY
47260541 BROADWAY 8BY
47260545 BROADWAY 8BY
47260549 BROADWAY 8BY
47260537 BROADWAY 8BY
47260555 LATITUDE 8LT
47260543 LATITUDE 8LT
47260547 LATITUDE 8LT
47260551 LATITUDE 8LT
47260539 LATITUDE 8LT
47260556 LONGITUDE 8LN
47260544 LONGITUDE 8LN
47260548 LONGITUDE 8LN
47260552 LONGITUDE 8LN
47260540 LONGITUDE 8LN
ND-14
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
111
Price Book 6
Effective July 9, 2018
Parts • ND Levers
Spring Cages
Part
Number Description Price Each
New Product beginning February 2017
N523-218 Springcage & Lever Catch Assy. - Outside Standard
(P, L, C, Z, R, J, T, B, BDC, G, H, L-SAR , L-CO6, J-C06, J-SAR, J-CO7) $67.40
N523-222 Springcage & Lever Catch Assy. - Inside with Cylinder
(P, L, C, Z, R, J, T, B, BDC, G, H, L-SAR , L-CO6, J-C06, J-SAR, J-CO7) 67.40
N523-224
Springcage & Lever Catch Assy. - Outside Competitor Cores
(J-YA6, J-YA7, J-MED)
140.00
N523-225
Springcage & Lever Catch Assy. - Inside Competitor Cores
(J-YA6, J-YA7, J-MED)
140.00
N523-221 Springcage & Lever Catch Assy. - Inside Less Cylinder 47.40
N523-223 Springcage & Lever Catch Assy. - Dummy Function 116.00
Original Product***
N123-021 Inside spring cage for all double cylinder functions except SFIC $67.40
N123-022 Outside spring cage for all functions except SFIC and ND10 67.40
N123-032 Inside Spring Cage for all functions except double cylinder functions 48.60
N123-043 Outside spring cage ND10 57.20
N123-056 Outside spring cage for all SFIC functions 70.50
N123-057 Inside spring cage for all SFIC double cylinder functions 44.60
*** All spring cage service items for the original product supporting Non-SCH cores need to convert to the new product.
Conversion Kits
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part Number Backset - Description Price Each
40-400 Outside Spring Cage / Lever Conversion Kit
$215
40-600 Inside Spring Cage / Lever Conversion Kit
Notes: All kits will contain a spring cage and lever. Some kits will contain
a button or tailpiece.
Kits are limited to previously offered product - KIL, FSIC, SFIC, L-SAR, J-SAR, J-CO6, J-YA6
When ordering specify: Function, Trim, Finish and Core (if applicable)
ND-15
112
D-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
ND Levers • Parts
ND-16
Strikes
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part Number Lip Length - Description Price Each
10-013-118* 1 1/8" - Square corner, T-strike, box, 1 1/8” x 2 3/4” $11.50
10-013-112* 1 1/2" - Square corner, T-strike, box, 1 1/8” x 2 3/4” 16.00
10-016* 1 1/8"" - Square corner, T-strike, deep box, 1 1/8” x 2 3/4” 1 1/8”
Use with re door latch 15.20
10-025-1316* 1 3/16" - ANSI, no box, 1 1/4” x 4 7/8” 15.20
10-025-138* 1 3/8" - ANSI, no box, 1 1/4” x 4 7/8” 42.40
10-025-112* 1 1/2" - ANSI, no box, 1 1/4” x 4 7/8”
K510-066 Box for ANSI strike 7.00
*Specify part number and nish. Ex: 10-025-1316 626
Buttons / Plunger Assemblies
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part Number Description Price Each
New Product beginning February 2017
N123-034* Emergency Button and Plunger (ND40 outside) $67.90
N123-035* Emergency Turn Button and Plunger (ND44 outside) 127.00
N523-209* Button - Push (ND30,ND40,ND44,ND50,ND73,ND91,ND97) 9.50
N523-210* Button - Push & Turn Button (ND53,ND92) 18.20
N523-211* Button - Push (ND85) 10.80
N123-085** Push and Turn Plunger Bar (ND53, ND91) 12.10
N123-086** Push Button Plunger Bar (ND30,ND40,ND44,ND50,ND73,ND91,ND97) 13.40
N123-087** Push Button Plunger Bar (ND85) 11.80
Original Product
N523-000* Button - Push (ND30,ND40,ND44,ND50,ND73,ND91,ND97) $9.50
N523-001* Button - Push & Turn Button (ND53,ND92) 18.20
N523-124* Button - Push (ND85) 10.80
*Specify part number and nish. Ex: N523-210 626
** Plunger assemblies will support both new (smaller dia.) and old (larger dia.) buttons; nish specication is not required
Roses
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
••••••••• •
Part Number Description Price Each
03-042* Outside / Inside Rose - RHO OME 101.00
N523-002* Blank Plate, ND25 (not available in 626AM) 104.00
XN12-035 Indicator Rose - Rhodes (626 Only)
124.00
XN12-045 Indicator Rose - Omega (626 Only)
*Specify part number and nish. Ex: 03-042 OME 626
Latches / Related Components
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part Number* Description Price Each
Spring Latch
13-248 2 3/4" - Square corner, 1 1/8” x 2 1/4” $87.50
14-010 3 3/4" - Square corner, 1 1/8” x 2 1/4” 105.00
Dead Latch
14-047 2 3/8" - Square corner, 1 1/8” x 2 1/4” 114.00
14-048 2 3/8" - Square corner, 1” x 2 1/4” 114.00
13-247 2 3/4" - Square corner, 1 1/8” x 2 1/4” 87.50
14-042 2 3/4" - Anti-friction Fire Door Latch 1” Square corner, 1 1/8” x 2 1/4”, 3/4” Throw 348.00
14-028 3 3/4" - Square corner, 1 1/8” x 2 1/4” 105.00
43-005 5" - Backset extension link - use with 2 3/4" backset latches 32.10
39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4” high
square corner strikes to 1/2” rabbeted door and frame preparations.
(Available in 626 and 605) 56.40
*Specify part number and nish. Ex: 13-248 622
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
113
Price Book 6
Effective July 9, 2018
Parts • ND Levers
Tailpieces
Part Number Description Price Each
N523-127 Core Driver - SCH FSIC $2.60
N523-091 Core Driver - SCH SFIC 11.80
09-060 Core Driver - LD SAR 2.80
09-061 Core Driver - JD YA6 23.30
09-062 Core Driver - JD CO6 12.60
09-063 Core Driver - JD SAR
10-140 Core Driver - LD CO6 10.70
10-141 Core Driver - JD CO7 5.60
10-142 Core Driver - JD YA7 22.30
10-143 Core Driver - JD MED 22.30
09-774 SFIC Core Driverand Spacer 14.60
D500-000 SFIC Core Spacer - Spacer required for 6-pin, no spacer required for 7-pin 1.60
XN12-292 Tail piece Sargent XC SFIC 12.60
Keycam Assemblies
Part Number Description Price Each
N223-066 Electried Keycam Assembly (Motor) - ND12EL/EU, ND80EL/EU, & ND96EL/EU $34.40
N123-045 Keycam Assembly ND40, ND44 7.00
N123-007 Keycam Assembly ND50, ND53, ND60 16.50
N123-010 Keycam Assembly ND73, ND70, ND72, ND25x70, ND70x80 Outside 16.60
N123-059 Keycam Assembly ND75, ND95 Inside 72.20
N123-008 Keycam Assembly ND82, ND12, ND80, ND25x80, ND70x80 Inside 20.00
N123-055 Keycam Assembly ND85 96.90
N123-011 Keycam Assembly ND91, ND92, ND93 22.50
N123-012 Keycam Assembly ND94 22.50
N123-098 Keycam Assembly ND95 Outside 96.90
N123-013 Keycam Assembly ND96 18.40
N123-097 Keycam assembly ND97 18.60
N523-065 Cam pin for ND60 and ND93 5.10
N523-066 Cam for inside ND60 and ND93 55.20
N123-076 Keycam Assembly ND66 Outside and Inside, and ND75 Outside 93.30
ND-17
Cylinder Reference Table
Available Finishes 606 626
• •
Part
Number* Cylinder Mechanism Function Design
Price Each
Open
Price Each
Restricted
23-065 Standard
Standard
Function All
$62.00 $79.00
91-018 Everest SL (R/B Keyways only) 79.00
20-765 Primus 137.00
20-765-XP Primus XP
91-718-XP Everest SL Primus XP (R/B Keyways only) 137.00
20-565 Primus UL437 169.00
20-565-XP Primus UL437 XP
23-000 Standard ND85 92.00 109.00
*Specify part number and finish. Ex: 23-065 626
114
D-Series AL-Series A-Series CYLINDRICAL
Price Book 6
Effective July 9, 2018
ND Levers • Parts
ND-18
Slide / Related Components
Part Number Description Price Each
C503-019 Slide Spring $6.50
C604-187 Slide Catch Restoring 7.20
C604-188 Slide Catch Non-restoring 7.20
C604-191 Slide Catch Spring 7.20
N523-025 Slide Clip 4.40
N523-149 Slide (previous part number was N523-024) 20.80
Misc. Chassis Components
Part Number Description Price Each
C503-331 Plunger Spring (order in multiples of 50) $0.14
24088544 Outside Housing 11.60
24085037 Inside Hub for all Non-electried functions except the ND66 and ND82 5.00
24085060 Inside Hub for ND66 & ND82 Functions 5.00
N523-020 Emergency cylinder for ND40 & ND44 functions 5.30
N523-041 Catch stop 5.20
N523-054 Adjustment Plate 5.20
N523-055 Anti-rotation plate 5.20
N523-063 Plunger Sleeve for ND60 and ND93 3.80
N523-064 Plunger for ND60 and ND93 13.20
N523-067 Plunger Bar for ND66 3.80
N523-069 Dummy Insert for ND170 13.20
N523-105 Threaded rod for mounting ND170s as double dummy set 5.20
Electrified Chassis Components
Part Number Description Price Each
24088551 Outside Electried Housing $12.00
N623-017 Inside Electried Hub 6.80
N223-062 Motor Assembly Non-Vandlgard 294.00
N223-063 Motor Assembly Vandlgard 323.00
N523-131 Anti-rotation plate - RX product 8.30
N523-194 RX Switch 59.30
N123-062 RX Upgrade Kit 68.10
Spindles
Part Number Description Price Each
N523-013 Outside Spindle $11.70
N523-019 Outside Electried Spindle 11.30
N523-177 Inside Spindle 3.70
Special Parts
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
••••••••• •
Part Number Description Price Each
XQ02-309* ** 10-013 Strike, 7/8” at lip 39.40
XQ03-494* ** 10-013 Strike, 1 5/8” – 6” lip 165.00
10-013 Strike, 6 1/8” – 12” lip 210.00
XQ07-351* ** 10-025 Strike, 7/8” at lip 41.50
10-025 Strike, lips thru 6” (except 7/8”, 1 3/16”, 3/8” and 1 1/2”) 200.00
XC03-069 Extension links, backsets over 5” – 42” 738.00
XN12-012* Chassis Spacer for 1 3/8” door (2 required) 76.70
XN13-052 Lever - Break-Away - Schlage KIL (P,L,C,Z); RHO
383.00
XN13-054 Lever - Break-Away - Schlage FSIC (R,J,T); RHO
XN13-053 Lever - Break-Away - Schlage SFIC (B,BDC,G,H); RHO
*Specify part number and finish. Ex: XN12-012 626
** Specify lip length.
D-SeriesAL-SeriesA-SeriesCYLINDRICAL
Price Book 6
Effective July 9, 2018 115
Screws
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part Number Description Door
Thickness Type Size Price Each
A501-171* ** ND170, washer — Washer — $1.20
N523-092* ** ND170, mounting screw 1 1/2” – 2” POH Machine 1/4” 20 x 2 1/2” 1.40
L583-133* ** ND170, mounting surface — Sheet Metal 1#8 x 1” 0.90
C603-256* ** ANSI strike — PFH Combo 12-24 x 1” 1.00
C603-897* ** Latch and strike — PFH Combo #8 x 3/4” 0.88
N523-021** Spring cage screws 1 3/8” – 2” PFH Machine #10 x 32 x 2 1/8” 1.80
N623-030 Motor assembly — PFH Combo #4-40 X 3/16 5.20
N523-135 RX switch — Hex B.H. #2-56 x 3/8" 0.58
N523-240 Chassis to spring cage — PFH Combo #8-32 X 1/4" 0.56
L583-454 Chassis — PFH #8-32 X 3/8" 1.50
*Specify part number and nish. Ex: C603-256 626
** Order in multiples of 100
Screw Packs
Available Finishes 605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part
Number* Description Contents Price Each
B202-517 Latch and strike (4) C603-897 $8.10
C203-736 ANSI strike (2) C603-256 6.40
N123-020 Mounting, all except ND170 (4) C603-897
(2) C603-256
(2) N523-021
(1) M504-271
8.40
N123-040 Mounting, ND170 (2) L583-133
(1) N523-092
(1) A501-171
(1) M504-271
9.90
*Specify part number and nish. Ex: N123-020 626
Screws Packs, Torx
Available Finishes
605 606 612 613 619 622 625 626 643e 626AM
•••••••••
Part
Number* Description Contents Price Each
C203-311 Latch and strike
(T-15 installation tool included)
(4) C503-766 (T-15)
$20.70
C203-312 Latch and ANSI strike
(T-xx installation tool included)
(2) C503-766 (T-15)
(2) L583-371 (T-20)
*Specify part number and nish. Ex: C203-311 626
Hollow Metal Door Reinforcements
Part Number Description Price Each
37-001 Metal door reinforcer kit, ts both 7/8” and 1” diameter housings - Specify door thickness, includes A501-567 and A501-565 or
A501-566 $38.20
24483760 Latch Spacer – ts 1” diameter latch housing and 1-3/4” hollow metal doors (steel & aluminum) 5.20
A501-565 Reinforcer for 1 3/8” thick non-reinforced metal doors. Fits both 7/8” and 1” diameter housings. 19.20
A501-566 Reinforcer for 1 3/4” thick non-reinforced metal doors. Fits both 7/8” and 1” diameter housings.
A501-567 3 1/2” Long latch housing sleeve used to reinforce joint between latch and backset link or to hold latch in metal doors 11.90
B250-1 ND-19
Hollow Metal Door Reinforcements, Screws, Screw Packs, Torx Screw Packs Parts • ND Levers
D-Series AL-Series A-Series CYLINDRICAL
116
Price Book 6
Effective July 9, 2018
ND-20
ND Levers • Parts Allegion Connect Harnesses
Allegion Connect Harnesses - Prices listed are net, discounting does not apply
Part Number Description Price Each
Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors)
CON-6 6" Wire Harness (internal p/n 106190-00) $10.50
CON-12 12" Wire Harness (internal p/n 106191-00) 14.00
CON-26 26" Wire Harness (internal p/n 106192-00) 18.50
CON-32 32" Wire Harness (internal p/n 106193-00) 16.90
CON-38 38" Wire Harness (internal p/n 106194-00) 15.50
CON-44 44" Wire Harness (internal p/n 106195-00) 18.00
CON-50 50" Wire Harness (internal p/n 106196-00) 18.50
CON-192 192" Wire Harness (internal p/n 106197-00) 44.20
Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors)
CON-6P 6" Wire Harness (internal p/n 106201-00) $13.40
CON-12P 12" Wire Harness (internal p/n 106202-00) 16.90
CON-26P 26" Wire Harness (internal p/n 106203-00) 18.50
CON-32P 32" Wire Harness (internal p/n 106204-00) 19.80
CON-38P 38" Wire Harness (internal p/n 106205-00) 20.30
CON-44P 44" Wire Harness (internal p/n 106206-00) 20.90
CON-50P 50" Wire Harness (internal p/n 106207-00) 21.50
CON-192P 192" Wire Harness (internal p/n 106208-00) 46.50
Harness with Molex Connector on one end, stripped leads on other (for connection to power supply)
CON-6W 6" extension to power supply (internal p/n 106210-00) $13.40
Service Kit
CON-KIT Connector Service Kit (internal p/n 050823-00-00) contains:
-100 each male & female terminals
-10 each 4-pin and 8-pin male connectors
-10 each 4-pin and 8-pin female connectors
- 1 extraction tool"
$111.00
B600/700/800-
SeriesB500-SeriesDEADBOLT
117
Price Book 6
Effective July 9, 2018
B250 Series
Grade 2 Deadlatch
B250-Series
Exploded View - B250PD
Door Preparation
Mounting screws
Inside thumbturn with holdback
7/16
" Hardened steel insert
7/16
" Trim ring
1/8
" Hardened steel insert
1/8
" Trim ring
Cylinder housing
5
-Pin cylinder
T
ailpiece
Deadlatch
9/16
" Throw
Box
Strike
B250-1
B600/700/800-Series
B500-Series DEADBOLT
118
Price Book 6
Effective July 9, 2018
B250 Series
Ordering Procedures
B250-2
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + cylinder code
Outside Des: Outside lever design, not applicable for deadbolts. Leave blank
Outside Fin: Outside nish
Inside Des: Inside lever design, not applicable for deadbolts. Leave blank
Inside Fin: Inside nish, specify only if different from the outside nish
Hand: Hand of door, not applicable for deadbolts. Leave blank
Latch: Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch
Strike: Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike
Dr Thk: Door thickness, leave blank for standard thickness or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4"
Ext: Extension, enter one of the following when door thicknesses 2" or greater are specied: EE = Extended Equally, EI = Extended
Inside, EO = Extended Outside
Dim: Dimension, enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
To order Schlage products, descriptive data should be in the same sequence as shown below.
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 B252P 626 613 12-103 10-025 214 EE 1316 KA
B600/700/800-
SeriesB500-SeriesDEADBOLT
119
Price Book 6
Effective July 9, 2018
B250-3
B250
Introduction
Product Identification
B2 50 P D X
Screw Suffix
X = Cross Recess Head
Mounting Screws
Latch Suffix
D = Deadlatch
Cylinder Suffix
P = 5-Pin Cylinder
P6 = 6-Pin Cylinder
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T = Full Size Construction Core
Z = Everest SL 7 pin Cylinder
Function
Lock Series
Finish Codes
and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
613 (US 10B) Oil Rubbed Bronze
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
Standard Features
Certification ANSI/BHMA Certified A156.36-2010, Grade 2 auxiliary lock.
Latch 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 9/16” throw deadlatch
Strike 1 1/8” x 2 3/4”, Square corner, T-strike, box
Backset 2 3/8”
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 1/2” – 1 3/4” standard cylinder, 1 1/2” - 2 1/8” interchangeable core cylinder
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
Trim Rings 7/16” and 1/8” Wrought brass or bronze, reinforced with security inserts
Table of Contents
Functions B250-4
Complete Locks B250-4
Options B250-6
Deadlatches .............................. B250-6
Stikes ..................................... B250-6
Locks Less Components ................... B250-6
Tamper-Resistant Screws
and Torx® Screws ......................... B250-6
Special Options ........................... B250-6
Parts B250-7
Latches & Strikes ..........................B250-7
Cylinders ...................................B250-7
Trim .......................................B250-7
Adapters ...................................B250-7
Door Reinforcements ......................B250-7
Screws .................................... B250-8
Tailpiece and Screw Packs ................ B250-9
Torx® Screw Packs ........................ B250-9
Special Parts .............................. B250-9
Cylinders Only (B100, B250, B400 E/B) ... B250-9
B600/700/800-Series
B500-Series DEADBOLT
120
Price Book 6
Effective July 9, 2018
B250-4
B250 • Functions
ANSI/BHMA Certified A156.36-2010, Grade 2 auxiliary lock.
SCHLAGE ANSI
Bored Deadlatch Locks
B250PD E0122 Single Cylinder Deadlatch (Night Latch)
Deadlocking latchbolt retracted by
key from outside or by inside turn
unit. Rotating turn unit and activating
hold-back feature keeps latch
retracted.
B252PD E0112 Double Cylinder Deadlatch*
Deadlocking latchbolt retracted by
key from either side. No hold-back
feature.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
B600/700/800-
SeriesB500-SeriesDEADBOLT
121
Price Book 6
Effective July 9, 2018
B250-5
Outside Cylinder Trim Inside Cylinder Trim Rose and Turn
Complete Locks • B250
Strikes
10-001 10-004 10-025
Latches
12-100
Function Description
Finishes Cylinder Adjustments
626 605 613 JD = Less Full Size Core
RD* = FSIC (Full Size Interchangable Core)
TD** = Full Size Construction Core
6
606 609
625 JD RD TD**
Single Cylinder Function
B250PD Single Cylinder Outside, Holdback Turn Inside $266 $272 $282 -$34 $37
Double Cylinder Function
B252PD Double Cylinder 295 301 311 -68 74
*Full size core furnished 1-bitted with two 6-pin keys unless otherwise specied. Not available with 0-bitted interchangeable cores.
** Temporary cores (TD) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
Control Keys are not furnished with locks and must be ordered separately. See Keys & Keying.
For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders.
SL Cylinder with Everest B or Everest R keyways add $17.00
See Terms and Conditions for ordering information and requirements.
"Ordering instructions: To change cylinder type from default 6-pin standard, change lock sufx as appropriate Ex: B250RD 626 for B250 function with FSIC in 626 nish”.
B600/700/800-Series
B500-Series DEADBOLT
122
Price Book 6
Effective July 9, 2018
B250-6
B250 • Options Latches, Strikes, Locks Less Components, Tamper-Resistant
Screws, Special Options
DeadLatches
Specify Description
List Price
Adjustment
12-100 Square corner, 1 1/8" x 2 1/4", 2 3/8" backset, 1" housing diameter, standard latch N/C
12-103 Square corner, 1 1/8" x 2 1/4", 2 3/4" backset, 1" housing diameter
Ordering instructions: specify desired latch on order only if requesting different from standard.
Strikes
Specify Description
List Price
Adjustment
10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length, standard strike N/C
10-001 xx Square corner, T-strike, box, 1 1/8” x 2 3/4”, specify lip length (xx) as 1”, 1 1/4”, 1 1/2”, 1 3/4”, 2” +$7.50
10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length N/C
10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 8.30
10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length (xx) as 1 3/8" or 1 1/2" 35.50
K510-066 Box for ANSI strike N/C
Ordering instructions: specify desired strike on order only if requesting different from standard.
Locks Less Components
Specify Description
List Price
Adjustment
LLL for deadlatch Less deadlatch
Example: B250PD 605 LLL 10-001 -20.40
LLL for strike Less strike
Example: B250PD 605 12-100 LLL -6.10
Ordering instructions: specify on order only if requesting different from standard.
Non-Standard Door Thickness
Specify Description
List Price
Adjustment
Door Thickness Over 1 3/4" - 2 1/4" N/C
Door Thickness Over 2 1/4" - 2 3/4" $101.00
Ordering instructions: Specify desired thickness on order only if requesting different from standard. EX: B250PD 626 2”
Tamper Resistant and Torx® Screws
Specify Description
List Price
Adjustment
X sufx Cross recessed mounting screws and drive pins for B250PD N/C
Torx Screws Latch and strike screws $20.70
Ordering instructions: specify on order only if desired option. EX: B250PDX 626 Torx Screws.
Special Options 6 Extended Lead Time
Specify Description
List Price
Adjustment
Door Thickness
+ XB03-330 B250PD for doors over 2 3/4" - 5 9/16" $277.00
Door Thickness
+ XB03-427 B252PD for doors over 2 3/4" - 5 9/16" 309.00
XB09-062 B250PD less holdback function (substitutes B400 turn) 163.00
Ordering instructions: specify on order only if desired option. EX: B250PD 626 5” XB03-330.
B600/700/800-
SeriesB500-SeriesDEADBOLT
123
Price Book 6
Effective July 9, 2018
B250-7
Parts • B250
Latches & Strikes, Cylinders, Trim, Adapters, Door Reinforcements
Latches & Strikes
Available Finishes
605 606 609 612 613 625 626
•••••••
Part Number Description Price Each
Deadlatches
12-100 Square corner, 1 1/8" x 2 1/4", 2 3/8" backset, 1" housing diameter, standard latch $85.30
12-103 Square corner, 1 1/8" x 2 1/4", 2 3/4" backset, 1" housing diameter
39-030 Rabbeted latch and strike kit, 605 and 626 nish only (adapts square corner & 2 3/4” high
square corner strikes to 1/2” rabbeted door and frame preps) 56.40
Strikes
10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) 6.50
10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 14.40
10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 10.80
10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 15.20
10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" 42.40
C603-623 Box for T-strike (nish not applicable) 0.68
K510-066 Box for ANSI strike (nish not applicable) 6.60
Ordering Instructions: Specify part number and nish.
Trim
Available Finishes
605 606 609 612 613 625 626
•••••••
Part Number Description Price Each
B202-671 Rose and turn without holdback $50.10
B202-672 Rose and turn with holdback 77.30
B502-711 Support (anchor) for B270 turn mounting screws (nish not applicable) 5.30
B502-815 Blank inside rose with exposed screws for B251, available 605 and 626 nish only 29.20
Ordering Instructions: Specify part number and nish if applicable.
Adapters
Available Finishes
605 613 626
•••
Part Number Description Price Each
38-016 Adapter ring kit for double cylinder locks used in 2 1/8” hole contains: (2) 38-031 $30.80
38-017 Adapter ring kit for single cylinder locks used in 2 1/8” hole contains: (1) 38-031 and (1) 38-032 40.40
38-031 2 1/2" diameter adapter ring for 2 1/8" door prep, mounted under cylinder 18.40
38-032 2 7/8" diameter adapter ring for 2 1/8" door prep, mounted under turn units/blank roses 26.40
Ordering Instructions: Specify part number and nish.
Door Reinforcements
Part Number Description Price Each
A501-565 Reinforcer for 1 3/8” thick nonreinforced metal doors, ts both 7/8” and 1” diameter housings (2 required per lock) $19.20
A501-566 Reinforcer for 1 3/4” thick nonreinforced metal doors, ts both 7/8” and 1” diameter housings (2 required per lock)
Ordering Instructions: Specify part number.
B202-671
38-031
A501-566
38-032
B202-672
B600/700/800-Series
B500-Series DEADBOLT
124
Price Book 6
Effective July 9, 2018
B250-8
B250 • Parts Screws
Screws
Available Finishes 605 606 609 612 613 625 626
•••••••
Part
Number
Specify
Finish
Description Application Price Each
(Order in multiples of 100)
Size Type Use with: Door Thickness
Single Cylinder, B250PD
B520-086 • 10-32 x 2 1/4”
POH
machine
7/16” & 1/8” trim rings 5-Pin 1 5/16” – under 1 11/16”
$1.00
7/16” trim ring 1 11/16” – 1 15/16”
(2) 1/8” trim rings 6-Pin 1 5/16” – under 1 7/16”
7/16” & 1/8” trim rings 1 7/16” – 1 13/16”
B520-087 • 10-32 x 2 5/8”
7/16” trim ring 5-Pin over 1 15/16” – 2 1/4”
1/8” trim ring over 2 1/4” – 2 9/16”
7/16” & 1/8” trim rings
6-Pin
over 1 13/16” – 1 15/16”
7/16” trim ring over 1 15/16” – 2 9/16”
1/8” trim ring over 2 9/16” – 2 3/4”
Double Cylinder, B252PD
B520-267 10-32 x 2 1/2”
Cross
recess
7/16” & 1/8” trim rings
5-Pin
1 5/16” – under 1 11/16”
$2.40
7/16” trim ring 1 11/16” – 1 15/16”
1/8” trim ring 2 7/16” – 2 11/16”
B520-268 10-32 x 2 3/4”
7/16” & 1/8” trim rings
5-Pin
over 1 7/16” – under 1 11/16”
7/16” trim ring over 1 15/16” – under 2 7/16”
1/8” trim ring over 2 11/16” – 2 7/8”
7/16” & 1/8” trim rings
6-Pin
1 7/16” – under 1 9/16”
7/16” trim ring over 1 11/16” – 2 3/16”
1/8” trim ring over 2 11/16” – 2 13/16”
B520-269 10-32 x 3”
(4) 1/8” trim rings
6-Pin
1 3/16” – under 1 7/16”
7/16” & 1/8” trim rings 1 9/16” – 1 15/16”
7/16” trim ring over 2 13/16” – 2 11/16”
1/8” trim ring over 2 13/16” – 3 1/8”
B520-271 • Drive pin — — 1.00
Interchangeable Core, Single Cylinder, B250RD
B520-086 • 10-32 x 2 1/4”
POH
machine
1” & 1/8” trim rings 1 5/16” – 1 1/2”
$1.00
1” trim ring over 1 1/2” – 2 1/8”
B520-087 •
10-32 x 2 5/8”
1” trim ring over 2 1/8” – 2 3/8”
7/16” & 1/8” trim rings over 2 3/8” – 2 5/8”
7/16” trim ring over 2 5/8” – 3 1/8”
Interchangeable Core, Double Cylinder, B252RD
B520-269 10-32 x 3”
Cross
recess
1” & 1/8” trim rings 15/16” – 1 5/8”
$2.40
1” trim ring over 1 5/8” – 2 1/8”
7/16” & 1/8” trim rings over 2 1/8” – 2 3/8”
1” trim ring over 2 3/8” – 2 5/8”
B520-271 • Drive pin — — 1.00
All Functions
C603-256 • 12-24 x 1” PFH
combo
ANSI strike — $1.00
C603-897 • 8 x 3/4” Latch and strike — 0.88
B600/700/800-
SeriesB500-SeriesDEADBOLT
125
Price Book 6
Effective July 9, 2018
B250-9
Parts • B250
Tailpiece and Screw Packs, Torx Screw Packs,
Special Parts, Cylinders Only (B100, B250, B400 E/B)
Tailpiece and Screw Packs
Available Finishes
605 606 609 612 613 625 626
•••••••
Part Number Description Price Each
Single Cylinder, B250PD
B202-509 For 1 3/8” - 1 3/4” doors contains: (1) B202-558 tailpiece
(2) B520-086 screws
$20.70
Double Cylinder, B252PD
B202-560 5 pin cyl, for 1 1/2”- 1 3/4” doors contains: (2) B202-370 tailpiece
(2) B202-580 tailpieces
(2) B520-267 screws
(2) B520-271 screws $18.00
B220-043 6 pin cyl, for 1 3/4” doors only contains: (2) B202-369 tailpieces
(2) B520-269 screws
Latch & Strike Screws, All functions, Standard T Strike
B202-517 Latch and strike screws contains: (4) C603-897 screws $8.10
Ordering Instructions: Specify part number and nish.
Torx Screw Packs
Available Finishes
605 606 609 612 613 625 626
•••••••
Part Number Description Price Each
C203-311 Latch and standard strike contains: (4) C503-766 (T-15)
$20.70
C203-312 Latch and ANSI strike contains: (2) C503-766 (T-15)
(2) L583-371 (T-20)
Notes: Torx screw packs are furnished with the appropriate T-xx installation tool(s)
Ordering Instructions: Specify part number and nish.
Special Parts 6 Extended Lead Time
Available Finishes
605 606 609 612 613 625 626
•••••••
Part Number Description Price Each
XQ07-351 xx 10-025 strike, lips through 6" (except 7/8", 11 3/16", 1 3/8" and 1 1/2").
Specify (xx) lip length in part number. $140.00
XQ03-493 xx 10-001 strike, lips over 2" through 6". Specify (xx) lip length in part number. 119.00
Ordering Instructions: Specify part number and nish.
Cylinder Only
Cylinders Only, B100, B250, B400 E/B
Description Part Number
Price Each
Open Restricted
5-Pin C, CE, E, F only 22-001 $62.00 $79.00
6-Pin Standard 22-002
Everest SL (R/B Keyways only) 91-008 79.00
Primus® 20-729* 137.00
Primus XP 20-729-XP*
Everest SL Primus XP (R/B Keyways only) 91-707-XP 137.00
Primus UL 437 20-529* 169.00
Primus XP UL437 20-529-XP*
* Must be used in locks with universal housings (B202-824 or B202-825).
B600/700/800-Series
B500-Series DEADBOLT
126
Price Book 6
Effective July 9, 2018
B250-10
B250 Notes
B600/700/800-
SeriesB250-SeriesDEADBOLT
127
Price Book 6
Effective July 9, 2018
B500 Series
Grade 2 Deadbolt
2 ³⁄₄
Rose and thumbturn mounting screws
Rose and ADA compliant thumbturn
Mounting screws
Steel mounting plate
Adjustable backset deadbolt - 2 3/8˝ or 2 3/4˝
1˝ Throw, with concealed hardened steel roller
UL Listed fire cup
(for fire rated locks)
Metal dust box reinforcer
and #12 x 3˝ wood screws
Strike
Strike screws
Faceplate screws
Removable anti-pry shield and trim ring
1˝ trim ring
6-pin cylinder
B500-1
B600/700/800-Series
B250-Series DEADBOLT
128
Price Book 6
Effective July 9, 2018
B500-2
B500 Series
Ordering Procedures
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + cylinder code
Outside Des: Outside lever design, not applicable for deadbolts. Leave blank
Outside Fin: Outside nish
Inside Des: Inside lever design, not applicable for deadbolts. Leave blank
Inside Fin: Inside nish, specify only if different from the outside nish
Hand: Hand of door, not applicable for deadbolts. Leave blank
Latch: Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch
Strike: Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike
Dr Thk: Door thickness, leave blank for standard thickness or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4"
Ext: Extension, enter one of the following when door thicknesses 2" or greater are specied: EE = Extended Equally, EI = Extended
Inside, EO = Extended Outside
Dim: Dimension for non-standard strike lip length, not applicable for the B500. Leave blank
Additional
Details: Enter additional detail for keying information or special requirements
To order Schlage products, descriptive data should be in the same sequence as shown below.
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 B560P 626 613 12-289 10-092 214 EE KA
B600/700/800-
SeriesB250-SeriesDEADBOLT
129
Price Book 6
Effective July 9, 2018
B500-3
B500
Introduction
Product Identification
B5 60 P F
UL Listing Suffix
F = UL Listed
Cylinder Suffix
P = 6-Pin Cylinder
L = Less 6-Pin Cylinder
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T =
Full Size Construction Core
BD = Less SFIC
BDC = Disposable SFIC
GD = Everest 29 Patented SFIC
HD = Construction SFIC
Z = Everest SL 7 pin Cylinder
Function
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Standard Features
Certification ANSI A156.36, 2010, Grade 2. Available UL Listed for 3-hour fire door (except B562 and B571)
With FSIC Interchangeable Core Cylinders: Grade 2
With SFIC Interchangeable Core Cylinders: Grade 3
Deadbolt 1” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throw
Strike 1 1/8” x 2 3/4”, Square corner, box
Backset Adjustable for 2 3/8” or 2 3/4”
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 3/8” – 1 7/8” standard cylinder or thumbturn only, 1 5/8” - 2” interchangeable core cylinder
Keys Two cut keys per lock, 6-pin, S123 section
Reinforcement Metal dust box reinforcer with three - 3” screws
Trim Ring 1” Wrought brass or bronze, reinforced with security insert
Finish Codes
and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
626AM Antimicrobial Coating
on Satin Chromium
643e Aged Bronze
Table of Contents
Functions B500-4
Complete Locks B500-5
Options B500-7
Deadbolts .................................B500-7
Strikes .....................................B500-7
Locks Less Components ....................B500-7
Non-Standard Door Thickness .............B500-7
Antimicrobial Coating ......................B500-7
Parts B500-8
Deadbolts ................................B500-8
Strikes ....................................B500-8
Trim ...................................... B500-8
Adapters ..................................B500-9
Door Reinforcements .....................B500-9
Occupancy Indicator Emergency Key ......B500-9
Individual Screws ........................ B500-10
Individual Screw Packs ....................B500-11
Cylinders ..................................B500-11
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
B600/700/800-Series
B250-Series DEADBOLT
130
Price Book 6
Effective July 9, 2018
B500-4
B500 • Functions
ANSI A156.36-2010, Grade 2. Available UL Listed for 3-hour fire door.
SCHLAGE ANSI
Bored Deadbolt Locks
B560P E0152 Single Cylinder Deadbolt Lock
Deadbolt thrown or retracted by key
from outside or by inside turn unit.
Bolt automatically deadlocks when
fully thrown.
B562P E0142 Double Cylinder Deadbolt Lock*
Deadbolt thrown or retracted by key either
side. Bolt automatically deadlocks when
fully thrown.
B580 E0192 Door Bolt
Deadbolt thrown or retracted by turn
unit only. No outside trim. Bolt
automatically deadlocks when fully
thrown. Can use either 2 1/8” or 1 1/2”
cross bore prep.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
B581 E01112 Door Bolt with Trim
Deadbolt thrown or retracted by turn
unit only. Outside blank plate.
Bolt automatically deadlocks when
fully thrown. 1 1/2”
cross bore prep.
B563P E0172 Classroom Deadbolt Lock
Deadbolt thrown or retracted by key
outside. Inside turn unit will retract
bolt only. Bolt automatically
deadlocks when fully thrown.
B561P E0162 One-Way Deadbolt Lock
Deadbolt thrown or retracted by key
only. Blank plate inside. Bolt
automatically deadlocks when fully
thrown.
B571 Door Bolt Occupancy Indicator
Deadbolt thrown or retracted by inside
turn unit. Occupancy indicator on
outside (reads either in use or vacant).
Can use either 2 1/8” or 1 1/2” cross bore
prep. Not UL Rated.
B600/700/800-
SeriesB250-SeriesDEADBOLT
131
Price Book 6
Effective July 9, 2018
B500-5
Outside Cylinder Trim Inside Cylinder Trim Rose and Turn
Complete Locks • B500
Strikes
10-094
Standard
10-064 10-087 10-092 10-095 10-108
Latches
12-288
Standard
12-289 12-290 12-287
B600/700/800-Series
B250-Series DEADBOLT
132
Price Book 6
Effective July 9, 2018
B500-6
B500 • Complete Locks
Cylinder Adjustments
J = Less FSIC (Full Size Interchangable Core)
L = Less Standard Cylinder
R* = FSIC (Full Size Interchangable Core)
T** =Full Size Construction Core
BD = Less SFIC (Small Format Interchangeable Core)
BDC = Disposable SFIC
GD = Everest 29 Patented SFIC
HD ** = Construction SFIC
Finishes
605
606
609
612
619
625
Function Description 626 643e 613 L J BD BDC R T*** GD HD***
Keyless
B580 No trim x thumbturn $62 $68 $78
B580F No trim x thumbturn, rerated 69 75 85
B581 Blank plate x thumbturn 62 68 78
B581F Blank plate x thumbturn, rerated 69 75 85
B571 Occupancy indicator x thumbturn
(includes 61-509 emergency release key) 65 71 81
Keyed, Single Cylinder
B560P Cylinder x thumbturn $81 $87 $97
-18 28 102 110
B560PF Cylinder x thumbturn, re rated 87 93 103
B561P One-way cylinder x blank plate 81 87 97
B561PF One-way cylinder x blank plate, re rated 87 93 103
B563P Classroom cylinder outside, retraction turn inside 84 90 100
B563PF Classroom cylinder outside, retraction turn inside, re rated 91 97 107
Keyed, Double Cylinder
B562P Double Cylinder $108 $114 $124 -36 44 173 191
*Full size core furnished 1-bitted with two 6-pin keys unless otherwise specied. Not available with 0-bitted interchangeable cores.
** Interchangeable construction core locks assessed a one-time non-refundable handling charge (50-231) per core.
*** Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
Interchangeable cores available 1 5/8” - 2” doors only.
Control Keys are not furnished with locks and must be ordered separately. See Keys & Keying.
For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders.
See Terms and Conditions for ordering information and requirements.
SL Cylinder with Everest B or Everest R keyways add $17.00.
Ordering instructions: To change cylinder type from default 6-pin standard, change lock sufx as appropriate.
Ex: B560R 626 for B560 function with FSIC in 626 nish.
B600/700/800-
SeriesB250-SeriesDEADBOLT
133
Price Book 6
Effective July 9, 2018
B500-7
Options • B500
Deadbolts, Strikes, Locks Less Components,
Non-Standard Door Thickness, Antimicrobial Coating
Deadbolts
Specify Description
List Price
Adjustment
Non re-rated locks
12-288 Square corner, 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., standard deadbolt
N/C
12-289 Round corner (1/4" radius), 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia.
12-290 Circular drive in deadbolt, adjustable 2 3/8" or 2 3/4" backset, 626 nish only
12-287 Triple Option - 1/4" radius round corner faceplate w/ 1" x 2 1/4" square corner and circular faceplates, adjustable 2 3/8"
or 2 3/4" backset, 1" housing dia.
12-291 Square corner, 1 1/8" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset. 1" housing dia.
Fire-rated (UL Listed) locks
12-294 Square corner, 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing dia., standard re-rated (UL Listed) deadbolt N/C
12-633 Square corner, 1" x 2 1/4", 5" backset, 1" housing dia. 25.50
Ordering instructions: specify desired deadbolt on order only if requesting different from standard.
Strikes
Specify Description
List Price
Adjustment
10-064 Circular drive-in, thimble strike, 1 3/16" dia., 626 nish only. N/C
10-087 ANSI, box, 1 1/4" x 4 7/8", 1 3/16" lip $6.00
10-092 Round corner (1/4" radius), 1 1/8" full lip, no box, 1 5/8" x 2 1/4"
N/C
10-094 Square corner, no box, 1 1/8" x 2 3/4", standard
10-095 Square corner, full 1 1/8" lip, no box, 1 5/8" x 2 1/4"
10-103 Round corner (1/4"" radius), 1" x 2 1/4", no reinforcement strike provided
605, 609, 630 only
10-104 Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, no reinforcement strike provided. 605, 609, 620, 630 only
10-108 Round corner, 1 1/8" x 2 3/4", no box
J250-028 2" strike reinforcement screws. 605, 609, 630, 643e only
37-016 Strike reinforcer, use with 10-094 or 10-108
Ordering instructions: specify desired strike on order only if requesting different from standard.
Locks Less Components
Description Specify
List Price
Adjustment
Less deadbolt LLL for deadbolt
Example: B560P 605 LLL 10-092 -$13.10
Less strike LLL for strike
Example: B560P 605 12-288 LLL -5.20
Less standard cylinder (B560) L cylinder sufx
Example: B560L -18.10
Less standard cylinder (B562) L cylinder sufx
Example: B562L -36.20
Ordering instructions: specify on order only if requesting different from standard.
Non-Standard Door Thickness
Specify Description
List Price
Adjustment
Door Thickness Extended Equally (EE) for over 1 3/4" - 2 1/4" doors (except interchangable core locks) N/C
Door Thickness Extended Equally (EE) for 1 3/8" to 1 5/8" doors (for interchangable core locks) $8.80
Ordering instructions: specify desired thickness on order only if requesting different from standard. EX - B560P 626 2”
Antimicrobial Coating 6Extended Lead Time
Specify Description
List Price
Adjustment
Finish as 626AM Antimicrobial coating applied to inside thumbturn and rose, outside trim ring and cylinder faceplate $18.20
Ordering instructions: specify on order only if desired option. Ex: B560P 626AM
B600/700/800-Series
B250-Series DEADBOLT
134
Price Book 6
Effective July 9, 2018
B500-8
B500 • Parts Deadbolts & Strikes, Trim
Deadbolts
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
12-288 Square corner, 1" x 2 1/4", adjustable 2 3/8" or 2 3/4" backset, 1" housing
dia., standard deadbolt $36.00
12-289 Round corner (1/4" radius), 1" x 2 1/4", adjustable 2 3/8" or 2 3/4"
backset, 1" housing dia.
12-290 Circular drive in deadbolt, adjustable 2 3/8" or 2 3/4" backset, 1” housing
dia., 626 nish only 40.80
12-287
Triple Option - 1/4" radius round corner faceplate w/ 1" x 2 1/4" square
corner and circular faceplates, adjustable 2 3/8" or 2 3/4" backset, 1"
housing dia.
41.70
12-291 Square corner, 1 1/8" x 2 1/4", adjustable 2 3/8” or 2 3/4” backset, 1”
housing dia. 40.80
12-633 Square corner, 1 1/8" x 2 1/4", 5" backset, 1" housing dia. 90.10
39-030
Rabbeted deadbolt and strike kit, adapts square corner latches and
2 3/4" high square corner strikes to 1/2" rabbeted door and frame
preparations, 605 and 626 only
56.40
Ordering Instructions: Specify part number and nish.
Strikes
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
10-064 Circular drive-in, thimble strike, 1 3/16" diameter, 626 nish only 16.20
10-087 ANSI, box, 1 1/4" x 4 7/8", 1 3/16" lip 22.20
10-092 Round corner (1/4" radius), 1 1/8" full lip, no box, 1 5/8" x 2 1/4" 7.90
10-094 Square corner, no box, 1 1/8" x 2 3/4", standard 12.20
10-095 Square corner, full 1 1/8" lip, no box, 1 5/8" x 2 1/4" 7.90
10-103 Round corner (1/4" radius), 1" x 2 1/4", no reinforcement strike provided
(Available 605, 609, 630 only) 2.00
10-104 Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, no reinforcement
strike provided. 605,609, 620, 630 only 2.60
10-108 Round corner, 1 1/8" x 2 3/4", no box 17.10
10-112 Metal dust box and 3 screws, use with 10-094 and 10-108. Finish not
applicable 11.70
37-016 Strike reinforcer, use with 10-094 and 10-108. Finish not applicable 15.20
Ordering Instructions: Specify part number and nish if applicable
Trim
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
B302-041 Rose and turn $43.20
B600-018 Mounting plate for rose and turn. Finish not applicable 10.00
12-626 Blank rose, exposed screws 24.60
38-034 Blank mounting plate kit for use on one side of B580 93.90
B302-045 Classroom rose and turn 43.20
Ordering Instructions: Specify part number and nish if applicable.
B302-041 B600-018 12-626 B302-045
B600/700/800-
SeriesB250-SeriesDEADBOLT
135
Price Book 6
Effective July 9, 2018
B500-9
Parts • B500
Adapters , Door Reinforcements, Occupancy Indicator Emergency Key
Accessories and Adapters
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
38-031 2 1/2" diameter adapter ring for 2 1/8" door prep, mounted under cylinder $18.40
B520-649 Trim ring w/ shield for B560/B562 22.80
B520-650 Trim ring w/ shield for Interchangeable Core functions 22.80
A501-878 Faceplate adapter to adapt 1" faceplate to 1 1/8" door preparation 0.74 (order in multiples of 100)
Ordering Instructions: Specify part number and nish if applicable.
Door Reinforcements
Part Number Description Price Each
A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors, ts both 7/8" and 1" diameter housings (2 required per lock) $19.20
A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors, ts both 7/8" and 1" diameter housings (2 required per lock)
37-016 Door frame strike reinforcer 15.20
Ordering Instructions: Specify part number.
Occupancy Indicator Emergency Key
Part Number Description Price Each
61-509 Emergency release key, standard size, for B571 occupancy indicator deadbolt. Includes one key, ring, and instruction tag $10.60
61-510 Emergency release key, large size, for B571 occupancy indicator deadbolt. Includes one key, ring, and instruction tag 20.40
Ordering Instructions: Specify part number.
38-031
A501-566
B520-649 B520-650
B600/700/800-Series
B250-Series DEADBOLT
136
Price Book 6
Effective July 9, 2018
B500-10
B500 • Parts
Individual Screws
Available Finishes 605 606 609 612 613 619 625 626 643e
•••••••••
Part
Number
Specify
Finish
Description Application Price Each
(Order in multiples of 100)
Size Type Use with: Door Thickness
Keyless, B580
B600-066 • 6-32 x 1/4” PH mach. Turn — $2.30
B600-048 8-32 x 1/2” PH mach. Mounting plate — 0.98
F506-359 8 x 3/4” RH wood Mounting plate — 0.44
Keyed, Single Cylinder, B560P, B563P
B600-100 1/4”-28 x 1 15/16” POH mach. Mounting 1 3/8” - 1 3/4”
2.30B600-101 1/4”-28 x 2 1/2” POH mach. Mounting over 1 3/4” - 2 1/4”
B600-066 • 6-32 x 1/4” PH mach. Turn —
B520-298 10-32 x 3/8” PH mach. Anti-pry shield — 0.76
Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R
B600-100 1/4”-28 x 1 15/16” POH mach. Mounting 1 3/8” - 2 1/4” $2.30
B600-066 • 6-32 x 1/4” PH mach. Turn —
Keyed, Double Cylinder, B562P
B600-047 1/4”-28 x 3 13/64” PH mach. Mounting 1 3/8” - 1 3/4”
$2.30
B600-078 1/4”-28 x 3 29/64” PH mach. Mounting over 1 3/4” - 2 1/4”
B520-298 10-32 x 3/8” PH mach. Anti-pry shield — 0.76
Keyed, Double Cylinder, B562GD, B562R
B600-053 1/4”-28 x 2 61/64” PH mach. Mounting 1 3/8" - 2" $2.30
B520-298 10-32 x 3/8” PH mach. Anti-pry shield — 0.76
Keyless, B571, B581
B520-662 10-32 x 1 1/8” POH mach. Mounting 1 3/8” - 1 3/4”
$2.30 B520-663 10-32 x 1 3/4” POH mach. Mounting over 1 3/4” - 2 1/4”
B600-066 • 6-32 x 1/4” PH mach. Turn —
All Functions
C603-897 •8 x 3/4” PFH combo Deadbolt and strike
screw
— $0.88
J250-028 8 x 2” PFH wood 2˝ strike screw — 1.90
R525-256 12 x 3” PFH wood 3˝ Metal dust box
screw
— 1.90
Ordering instructions: specify part number and nish if applicable. Order in multiple quantities of 100.
Individual Screws
B600/700/800-
SeriesB250-SeriesDEADBOLT
137
Price Book 6
Effective July 9, 2018
Individual Screw Packs, Cylinders
Individual Screw Packs
Available Finishes 605 606 609 612 613 619 625 626 643e
•••••••••
Part
Number Door Thickness Contents Price Each
Keyless, B580
61-506 1 3/8” – 2 1/4” (2) B600-048 (2) F605-359 (4) C603-897
(1) B600-018 (2) B600-066 $17.30
Keyed, Single Cylinder, B560P, B563P
61-500 1 3/8” – 1 3/4” (1) B600-018 (2) B600-100 (2) B600-066 (4) C603-897 $14.20
61-501 over 1 3/4” – 2 1/4” (1) B600-018 (2) B600-101 (2) B600-066 (4) C603-897
Keyed, Single Cylinder, B560GD, B563GD, B560R, B563R
61-500 1 3/8” – 2” (1) B600-018 (2) B600-100 (2) B600-066 (4) C603-897 $14.20
Keyed, Double Cylinder, B562P
61-502 1 3/8” – 1 3/4” (2) B600-047 (4) C603-897 $10.80
61-503 over 1 3/4” – 2 1/4” (2) B600-078 (4) C603-897
Keyed, Double Cylinder, B562GD, B562R
61-507 1 3/8” – 2” (2) B600-053 (4) C603-897 $10.80
Keyless, B581, B571
61-504 1 3/8” – 1 3/4” (2) B520-662 (4) C603-897 (2) B600-066 (1) B600-018 $22.40
61-505 over 1 3/4” – 2 1/4” (2) B520-663 (4) C603-897 (2) B600-066 (1) B600-018
Ordering instructions: specify part number and nish.
B500 Series Cylinders - Single Cylinder Deadbolts
Part Number Description Door Thickness
Price Each
Open Restricted
22-003 Standard 1 3/8” - 1 3/4” $62.00 $79.00
22-004 Standard 1 3/4” - 2 1/4”
20-188 Primus 1 3/8” – 1 7/8”
137.00
20-188-XP Primus XP 1 3/8” – 1 7/8”
20-189 Primus 1 7/8” – 2 1/4”
20-189-XP Primus XP 1 7/8” – 2 1/4”
20-190 Primus UL 1 3/8” – 1 7/8”
169.00
20-190-XP Primus XP UL 1 3/8” – 1 7/8”
20-191 Primus UL 1 7/8” – 2 1/4”
20-191-XP Primus XP UL 1 7/8” – 2 1/4”
B500 Series Cylinders - Double Cylinder Deadbolts*
Part Number Description Door Thickness
Price Each
Open Restricted
22-645 Standard 1 3/8” - 1 3/4” $62.00 $79.00
22-646 Standard 1 3/4” - 2 1/4”
20-745 Primus 1 3/8” – 1 7/8”
137.00
20-745-XP Primus XP 1 3/8” – 1 7/8”
20-746 Primus 1 7/8” – 2 1/4”
20-746-XP Primus XP 1 7/8” – 2 1/4”
20-545 Primus UL 1 3/8” – 1 7/8”
169.00
20-545-XP Primus XP UL 1 3/8” – 1 7/8”
20-546 Primus UL 1 7/8” – 2 1/4”
20-546-XP Primus XP UL 1 7/8” – 2 1/4”
* Part numbers for double sided cylinders represent one cylinder only.
B500-11
Parts • B500
B600/700/800-Series
B250-Series DEADBOLT
138
Price Book 6
Effective July 9, 2018
B500-12
B500 Notes
B500-SeriesB250-SeriesDEADBOLT
139
Price Book 6
Effective July 9, 2018
B600/700/800 Series
Grade 1 Deadbolt
Wood frame reinforcer
With #12 x 3" wood
screws, standard for
all B-Series deadbolts
Box
Strike
Deadbolt
1" Throw
Thumbturn
mounting
screws
Inside thumbturn
Mounting screws
Hardened steel
ball bearings
Mounting plate
Security shield
7/8" Trim ring
6-Pin cylinder
Outside cylinder
housing
Cylinder retaining screw
B600/700/800-Series
Exploded View - B660P
Door Preparation
B600-1
B500-Series B250-Series DEADBOLT
140
Price Book 6
Effective July 9, 2018
B600-2
B600/700/800 Series
Ordering Procedures
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
16. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $16.40 per cylinder.
17. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + cylinder code
Outside Des: Outside lever design, not applicable for deadbolts. Leave blank
Outside Fin: Outside nish
Inside Des: Inside lever design, not applicable for deadbolts. Leave blank
Inside Fin: Inside nish, specify only if different from the outside nish
Hand: Hand of door, not applicable for deadbolts. Leave blank
Latch: Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch
Strike: Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike
Dr Thk: Door thickness, leave blank for standard thickness or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4"
Ext: Extension, enter one of the following when door thicknesses 2" or greater are specied: EE = Extended Equally, EI = Extended
Inside, EO = Extended Outside
Dim: Dimension for non-standard strike lip length, not applicable for the B6/7/8. Leave blank
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 B660P 626 613 12-630 10-094 214 EE KA
To order Schlage products, descriptive data should be in the same sequence as shown below.
B500-SeriesB250-SeriesDEADBOLT
141
Price Book 6
Effective July 9, 2018
B600-3
B600/700/800
Introduction
Product Identification
B6 60 P X
Screw Suffix
X = Torx® screws
Cylinder Suffix
P = 6-Pin Cylinder
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T =
Full Size Construction Core
BD = Less SFIC
BDC = Disposable SFIC
GD = Everest 29 ™ Patented SFIC
HD = Construction SFIC
Z = Everest SL 7 pin Cylinder
Function
Lock Series
B6 = Standard pinning
B7 = Primus® Controlled Access
B8 = Primus High Security
SFIC = Small Format (Best® Style) Interchangeable Core
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Satin Brass, Blackened
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
625 (US 26) Bright Chromium Plated
626 (US26D) Satin Chromium Plated
626AM Antimicrobial Coating
on Satin Chromium
643e (US11) Aged Bronze
Standard Features
Locks are furnished with standard features unless otherwise specified.
Certification ANSI/BHMA Certified A156.36-2010, Grade 1 auxiliary lock.
With FSIC Interchangeable Core Cylinders: Grade 2
With SFIC Interchangeable Core Cylinders: Grade 3
UL Listed for 3-hour fire door, B800-Series is UL437 listed.
Deadbolt 1 1/8” x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throw
Strike 1 1/8” x 2 3/4”, Square corner, box
Backset 2 3/4”
Door Range 1 5/8” - 2” standard cylinder or FSIC; 1 3/4” - 2” SFIC; 1 3/8” - 2 1/2” door bolt only
Reinforcement Metal dust box reinforcer with two 3” screws
Trim Rings 7/8” Solid brass or bronze
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
Table of Contents
Functions B600-4
Complete Locks B600-5
Options B600-7
Deadbolts .................................B600-7
Strikes .....................................B600-7
Locks Less Components ....................B600-7
Non-Standard Door Thickness .............B600-7
Antimicrobial Coating ......................B600-7
Tamper Resistant Torx Screws. . . . . . . . . . . . . .B600-7
Parts B600-8
Deadbolts ................................ B600-8
Strikes .................................... B600-8
Trim ......................................B600-9
Door Reinforcements .....................B600-9
Screws ................................... B600-10
Screw and Ball Bearing Packs ............B600-10
Torx Screw Packs .........................B600-11
Special Parts ..............................B600-11
Cylinders ..................................B600-12
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
B500-Series B250-Series DEADBOLT
142
Price Book 6
Effective July 9, 2018
B600-4
B600/700/800 • Functions
ANSI/BHMA Certified A156.36-2010, Grade 1 auxiliary lock.
UL Listed for 3-hour fire door, B800-Series is UL437 listed.
SCHLAGE ANSI
Bored Deadbolt Locks
B660P
B760P
B860P E0151 Single Cylinder Deadbolt Lock
Deadbolt thrown or retracted by key
from outside or by inside turn unit.
Bolt automatically deadlocks when
fully thrown.
B662P
B762P
B862P E0141 Double Cylinder Deadbolt Lock*
Deadbolt thrown or retracted by key
from either side. Bolt automatically
deadlocks when fully thrown.
B661P
B761P
B861P E0161 One-Way Deadbolt Lock
Deadbolt thrown or retracted by key
only. Blank plate inside. Bolt
automatically deadlocks when fully
thrown.
B663P
B763P
B863P E0171 Classroom Deadbolt Lock
Deadbolt thrown or retracted by key
outside. Inside turn unit will retract
bolt only. Bolt automatically
deadlocks when fully thrown.
B664P
B764P
B864P E0101 Cylinder Lock
Deadbolt thrown or retracted by key
from one side. No inside trim. Bolt
automatically deadlocks when fully
thrown. Requires 1 1/2” cross bore only.
B680 E0191 Door Bolt
Deadbolt thrown or retracted by turn
unit only. No outside trim. Bolt
automatically deadlocks when fully
thrown. Requires 1 1/2” cross bore only.
Door range is 1 3/8” - 2 1/2”.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
B500-SeriesB250-SeriesDEADBOLT
143
Price Book 6
Effective July 9, 2018
B600-5
Outside Cylinder Trim
Primus® Controlled
Access Cylinder Trim
UL
Inside Cylinder Trim
Primus® High Security
Cylinder Trim
Rose and Turn
Complete Locks • B600/700/800
Strikes
10-094
Standard
10-064 10-087 10-092 10-095
Latches
12-631
Standard
12-641 12-297 12-317
B500-Series B250-Series DEADBOLT
144
Price Book 6
Effective July 9, 2018
B600-6
B600/700/800 • Complete Locks
Cylinder Adjustments
J = Less FSIC (Full Size Interchangable Core)
R* = FSIC (Full Size Interchangable Core)
T** =Full Size Construction Core
BD = Less SFIC (Small Format Interchangeable Core)
BDC = Disposable SFIC
GD = Everest 29 Patented SFIC
HD** = Construction SFIC
Finishes
605
606
609
612
619
625
Function Description 626 643e 613 J R T** BD BDC GD HD**
B600 Series
Keyless
B680 No trim x thumbturn $150 $156 $166
Keyed, Single Cylinder
B660P Cylinder x thumbturn $192 $198 $208 -34 +37 N/C +82 +43
B661P One-way cylinder x blank plate
B663P Classroom cylinder outside, retraction turn inside 200 206 216
B664P Cylinder x no trim 192 198 208
Keyed, Double Cylinder
B662P Double Cylinder $246 252 262 -68 +74 N/C +164 +86
B700 SERIES: Primus® Controlled Access Cylinder
Keyed, Single Cylinder
B760P Cylinder x thumbturn $265 $271 $281 +37B761P One-way cylinder x blank plate
B763P Classroom cylinder outside, retraction turn inside 275 281 291
B764P Cylinder x no trim 265 271 281
Keyed, Double Cylinder
B762P Double Cylinder 388 394 404 +74
B800 SERIES: Primus® High Security Controlled Access Cylinder
Keyed, Single Cylinder
B860P Cylinder x thumbturn $290 $296 $306
B861P One-way cylinder x blank plate
B863P Classroom cylinder outside, retraction turn inside 307 313 323
B864P Cylinder x no trim 290 296 306
Keyed, Double Cylinder
B862P Double Cylinder $408 $414 $424
Notes B600, 700, 800 not available less standard cylinder.
Control Keys are not furnished with locks and must be ordered separately. See Keys & Keying.
For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders.
See Terms and Conditions for ordering information and requirements.
SL Cylinder with Everest B or Everest R keyways add $17.00.
*B600R Full Size Core locks furnished 1-bitted with two 6-pin keys unless otherwise specied. Not available with 0-bitted interchangeable cores B700R Full Size
Core locks furnished 0-bitted with two 6-pin keys entered as separate line item.
** Non-disposable construction core locks assessed a one-time non-refundable handling charge (50-231) of $10.10 per core.
Ordering instructions: To change cylinder type from default 6-pin standard, change lock sufx as appropriate.
Ex: B660R 626 for B660 function with FSIC in 626 nish.
B500-SeriesB250-SeriesDEADBOLT
145
Price Book 6
Effective July 9, 2018
B600-7
Options • B600/700/800
Deadbolts, Strikes, Locks Less Components, Non-Standard Door Thickness,
Antimicrobial Coating , Tamper Resistant Torx Screws
Strikes
Specify Description
List Price
Adjustments
10-094 Square corner, no box, 1 1/8" x 2 3/4", standard
N/C
10-064 Circular drive-in, thimble strike, 1 3/16" diameter, 626 nish only
10-087 ANSI, 1 1/4" x 4 7/8", 1 3/16" lip length, box
10-092 Round corner (1/4" radius), 1 5/8" x 2 1/4", 1 1/8" full lip, no box
10-095 Square corner, 1 5/8" x 2 1/4", 1 1/8" full lip, no box
10-104 Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, 605, 609, 620, 630 nishes only
10-103 Round corner (1/4" radius), 1" x 2 1/4", 605, 609, 630 nishes only
37-016 Strike reinforcer, use with 10-094
J250-028 2" strike reinforcement screws. 605, 609, 630 nishes only
Ordering instructions: specify desired strike on order only if requesting different from standard.
Deadbolts
Specify Description
List Price
Adjustments
12-630 2 3/8" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia.
N/C
12-640 2 3/8" backset, circular, drive-in, 1 1/16" housing dia., 626 only
12-631 2 3/4" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia., standard deadbolt
12-641 2 3/4" backset, circular, drive-in, 1 1/16" housing dia., 626 only
12-632 3 3/4" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia.
$25.50
12-642 3 3/4" backset, circular, drive-in, 1 1/16" housing dia., 626 only
12-633 5" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia.
12-643 5" backset, circular, drive-in, 1 1/16" housing dia., 626 only
12-297 Adjustable 2 3/8" or 2 3/4" backset, square corner, 1 1/8" x 2 1/4", 1" housing dia. N/C
12-317 Adjustable 2 3/8” or 2 3/4” backset, Circular, drive-in, 1” housing dia., 626 only
Ordering instructions: specify desired deadbolt on order only if requesting different from standard.
Non-Standard Door Thickness
Specify Description
List Price
Adjustments
1 3/8" Door
Thickness 1 3/8” door thickness. Not available for interchangeable core locks. $9.40
Door Thickness Extended Equally (EE), over 2"-2 1/2" thick doors (not available SFIC; see Special Parts for SFIC conversion kits) N/C
Note: For doors over 2 1/2” - 4” thick, see Special Parts for conversion kits.
Ordering instructions: specify desired thickness on order only if requesting different from standard. EX: B660P 626 1 3/8”
Antimicrobial Coating 6Extended Lead Time
Specify Description
List Price
Adjustments
Finish as 626AM Antimicrobial coating applied to inside thumbturn and rose, outside trim ring and cylinder faceplate $17.50
Ordering instructions: specify on order only if desired option. Ex: B560P 626AM.
Locks Less Components
Description Specify
List Price
Adjustment
Less deadbolt LLL for deadbolt
Example: B660P 605 LLL 10-064 -17.80
Less strike LLL for strike
Example: B660P 605 12-630 LLL -5.60
Less key blanks, B700 and B800 only LKB -16.40
Less Cylinder Not available B600, B700, B800 N/A
Ordering instructions: specify on order only if requesting different from standard.
Tamper Resistant Torx® Screws
Specify Description
List Price
Adjustments
X sufx Torx latch, strike, and mounting screws. Not available SFIC locks. $20.70
Ordering instructions: Add X sufx to lock. Ex: B660PX.
Shaded items are standard components and are
furnished with locks unless otherwise specified.
B500-Series B250-Series DEADBOLT
146
Price Book 6
Effective July 9, 2018
B600-8
B600/700/800 • Parts Deadbolts, Strikes
Deadbolts
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
Complete Deadbolts
12-297 Square corner, adjustable 2 3/8" or 2 3/4" backset, 1 1/8" x 2 1/4",
1" housing dia. $58.00
12-317 Circular, drive-in, adjustable 2 3/8" or 2 3/4" backset, 1" housing dia.,
626 only
12-630 Square corner, 2 3/8" backset, 1 1/8" x 2 1/4", 1" housing dia.
51.50
12-640 Circular, drive-in, 2 3/8" backset, 1 1/16" housing dia., 626 only
12-631 Square corner, 2 3/4" backset, 1 1/8" x 2 1/4", 1" housing dia., standard
deadbolt
12-641 Circular, drive-in, 2 3/4" backset, 1 1/16" housing dia., 626 only
12-632 Square corner, 3 3/4" backset, 1 1/8" x 2 1/4", 1" housing dia.
90.10
12-642 Circular, drive-in, 3 3/4" backset, 1 1/16" housing dia., 626 only
12-633 Square corner, 5" backset, 1 1/8" x 2 1/4", 1" housing dia
12-643 Circular, drive-in, 5" backset, 1 1/16" housing dia., 626 only
39-030
Rabbeted deadbolt and strike kit (adapts square corner latches and 2 3/4"
high square coner strikes to 1/2" rabbeted door and frame preparations). 605
and 626 nish only.
56.40
Deadbolts Less Faceplates
12-650 2 3/8" backset deadbolt unit less faceplate, 1" housing dia. 40.20
12-651 2 3/4" backset deadbolt unit less faceplate, 1" housing dia.
12-652 3 3/4" backset deadbolt unit less faceplate, 1" housing dia. 79.40
12-653 5" backset deadbolt unit less faceplate, 1" housing dia.
Faceplate kits
12-627 Square corner faceplate, 1 1/8" x 2 1/4", includes backplate and screws 10.30
12-628 Circular drive-in faceplate and collar, 626 nish only
Ordering Instructions: Specify part number and nish.
Strikes
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
10-064 Circular drive-in, thimble strike, 1 3/16" diameter, 626 nish only $16.20
10-087 ANSI, box, 1 1/4" x 4 7/8", 1 3/16" lip 22.20
10-092 Round corner (1/4" radius), 1 1/8" full lip, no box, 1 5/8" x 2 1/4" 7.90
10-094 Square corner, no box, 1 1/8" x 2 3/4", standard 12.20
10-095 Square corner, full 1 1/8" lip, no box, 1 5/8" x 2 1/4" 7.90
10-103 Round corner (1/4" radius), 1" x 2 1/4", no reinforcement strike provided
(Available 605, 609, 630 only) 2.00
10-104 Round corner (1/4" radius), 1 1/4" x 3 5/8", 4 hole, no reinforcement
strike provided. 605,609, 620, 630 only 2.60
10-112 Metal dust box and 3 screws, use with 10-094 and 10-108.
Finish not applicable. 11.70
37-016 Strike reinforcer, use with 10-094 and 10-108. Finish not applicable. 15.20
K510-066 Plastic dust box for ANSI strike. Finish not applicable. 7.00
Ordering Instructions: Specify part number and nish if applicable.
12-631 12-641
12-297 12-317
10-064 10-087 10-092 10-09510-094
Standard
B500-SeriesB250-SeriesDEADBOLT
147
Price Book 6
Effective July 9, 2018
B600-9
Parts • B600/700/800
Trim, Door Reinforcements
Trim
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part Number Description Price Each
12-617 Rose and turn $46.00
12-618 Rose and turn, classroom function 51.30
12-625 Classroom driver kit. Finish not applicable 10.20
12-626 Blank inside rose, exposed screws, B661 24.60
38-034 Blank mounting plate kit for use on one side of B664 or B680 93.90
B600-017 Security shield, 2 1/8" door preparation. Finish not applicable 10.20
B600-018 Mounting plate, turn. Finish not applicable 10.00
B610-035 Support (anchor) and mounting screws, B664. Finish not applicable 26.60
Ordering Instructions: Specify part number and nish if applicable.
Door Reinforcements
Part Number Description Price Each
A501-565 Reinforcer for 1 3/8" thick nonreinforced metal doors, ts both 7/8"
and 1" diameter housings (2 required per lock) $19.20
A501-566 Reinforcer for 1 3/4" thick nonreinforced metal doors, ts both 7/8"
and 1" diameter housings (2 required per lock)
37-016 Door frame strike reinforcer 15.20
Ordering Instructions: Specify part number.
12-617
A501-566
B600-017
B500-Series B250-Series DEADBOLT
148
Price Book 6
Effective July 9, 2018
B600-10
B600/700/800 • Parts Screws, Screw and Ball Bearing Packs
Screws
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part
Number
Specify
Finish
Description
Application
Price Each
(Order in multiples of 100)Size Type
C603-256 •12-24 x 1” PFH
combo
ANSI strike $1.00
C603-897 • 8 x 3/4” Deadbolt and strike 0.88
Screw and Ball Bearing Packs
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part
Number
Specify
Finish
Door
Thickness Contents Price Each
Keyless
B610-066 •Rose trim, B680 (2) Mounting screws $8.20
Keyed, Single Cylinder
B610-049 1 3/8” – 2 1/2”, B664 2) Mounting screws
19.00B610-050 1 3/8” – 2”, B660, 661, 663 (2) Mounting screws
(2) Ball bearings
B610-051 over 2” – 2 1/2”, B660, 661, 663
B610-066 • Rose trim, B660, 661, 663 (2) Mounting screws 8.20
Keyed, Double Cylinder (except Interchangeable Core)
B610-053 1 3/8” – 2”, B662P (2) Mounting screws
(2) Ball bearings 19.00
B610-055 over 2” – 2 1/2”, B662P
Keyed, Double Cylinder, Interchangeable Core
B610-054 1 5/8” – 2”, B662R (2) Mounting screws
(2) Ball bearings 19.00
B610-056 over 2” – 2 1/2”, B662R
Note: Above screw packs are also used for B700 and B800 series locks.
B500-SeriesB250-SeriesDEADBOLT
149
Price Book 6
Effective July 9, 2018
Parts • B600/700/800
Torx Screw Packs, Special Parts
Torx Screw Packs
Available Finishes
605 606 609 612 613 619 625 626 643e
•••••••••
Part
Number
Specify
Finish
Door
Thickness Contents Price Each
Keyless
B610-066 •Rose trim, B680 (2) Mounting screws (T-20) $9.40
Keyed, Single Cylinder
B610-059 1 3/8” – 2 1/2”, B664 2) Mounting screws (T-30) 20.20
B610-065 • Rose trim, B660, 661, 663 (2) Mounting screws (T-10) 9.40
Keyed, Double Cylinder (except Interchangeable Core)
B610-061 1 3/8” – 2”, B662P (2) Mounting screws (T-30)
(2) Ball bearings 20.20
B610-063 over 2” – 2 1/2”, B662P
Keyed, Double Cylinder, Interchangeable Core
B610-062 1 5/8” – 2”, B662R (2) Mounting screws (T-30)
(2) Ball bearings 20.20
B610-064 over 2” – 2 1/2”, B662R
All Functions
C203-311 • Deadbolt and strike (4) C503-766 (1) T-15 size Torx Bit
8-32 x 1/2”
20.70
C203-312 • Deadbolt and ANSI strike
(2) C503-766 (1) T-15 size Torx Bit
8-32 x 1/2”
(2) L583-371 (1) T-20 size Torx Bit
12-24 x 1/2”
Notes Torx screw packs are furnished with appropriate T-xx installation tool(s).
Above screw packs are also used for B700 and B800-Series locks.
B600-11
Special Parts
6 Extended Factory Lead Time
Part
Number
Door
Range Function Description
Price
Each
XB11-916 2”-4” B660P, B663P
Screw and tailpiece conversion kit for B600/
700/800-Series Locks to fit doors Extended
Equally (EE), over 2" - 4" thick. Specify
door thickness.
$163.00
XB11-917 2”-3” B662P 102.00
XB11-918 2”-4” B760P, B763P B860P, B863P
XB11-919 2”-3” B762P, B862P 163.00
XB11-920 2”-4” B660R, B660J, B660T, B663R,
B663J, B663T, B760R, B763R 102.00
XB11-921 2”-4” B662R, B662J, B662T, B762R 102.00
XB11-922 2”-4”
B660BD, B660GD, B660HD,
B663BD, B663GD, B663HD
Screw and tailpiece conversion kit for
B600-Series locks to fit doors Extended
Equally (EE), over 2" - 4" thick.
Specify door thickness.
102.00
Notes:: For door thickness and locks not listed above, please use the Innovation Center (RFQ) request form
Ordering instructions: Specify part number and desired door thickness, EX: XB11-916 3”.
B500-Series B250-Series DEADBOLT
150
Price Book 6
Effective July 9, 2018
B600-12
B600/700/800 Cylinders
B600/700-Series Cylinder Reference Table
Cylinder Mechanism Function Door Thickness
Cylinder Less
Housing
Price Each
Open Restricted
B600-Series Standard B660, B663 1 3/8” – 2 1/2” 22-644 $62.00
$79.00
B600-Series SL (R/B Keyways only) B660, B663 1 3/8” – 2 1/2” 91-032
B600-Series Standard B661, B664 1 3/8” – 2” 22-642 62.00
B600-Series SL (R/B Keyways only) B661, B664 1 3/8” – 2” 91-030
B600-Series Standard B661, B664 2” – 2 1/2” 22-643 62.00
B600-Series SL (R/B Keyways only) B661, B664 2” – 2 1/2” 91-031
B600-Series Standard B662 1 3/8” – 2” 22-085 62.00
B600-Series SL (R/B Keyways only) B662 1 3/8” – 2” 91-028
B600-Series Standard B662 2” – 2 1/2” 22-086 62.00
B600-Series SL (R/B Keyways only) B662 2” – 2 1/2” 91-029
B700-Series Primus
B760, B763 1 3/8” – 2 1/2” 20-744
137.00
B761, B764 1 3/8” – 2” 20-742
2” – 2 1/2” 20-743
B762 1 3/8” – 2” 20-745
2” – 2 1/2” 20-746
B700-Series Primus XP
B760-XP, B763-XP 1 3/8” – 2 1/2” 20-744-XP
B760-XP, B763-XP (R/B Keyways only) 1 3/8” – 2 1/2” 91-711-XP 137.00
B761-XP, B764-XP 1 3/8” – 2” 20-742-XP 137.00
B761-XP, B764-XP (R/B Keyways only) 1 3/8” – 2” 91-709-XP 137.00
B761-XP, B764-XP 2” – 2 1/2” 20-743-XP 137.00
B761-XP, B764-XP (R/B Keyways only) 2” – 2 1/2” 91-710-XP 137.00
B762-XP 1 3/8” – 2” 20-745-XP 137.00
B700-Series SL Primus XP (R/B Keyways only) B762-XP 1 3/8” – 2” 91-712-XP 137.00
B700-Series Primus XP B762-XP 2” – 2 1/2” 20-746-XP 137.00
B700-Series SL Primus XP (R/B Keyways only) B762-XP 2” – 2 1/2” 91-713-XP 137.00
B800-Series Cylinder Reference Table
Cylinder Mechanism Function Door Thickness Cylinder Less Housing
Price Each
Open Restricted
B800-Series
Primus UL437
B860, B863 1 3/8” – 2 1/2” 20-544
$169.00
B861, B864 1 3/8” – 2” 20-542
2” – 2 1/2” 20-543
B862 1 3/8” – 2” 20-545
2” – 2 1/2” 20-546
B800-Series
Primus-XP UL437
B860-XP, B863-XP 1 3/8” – 2 1/2” 20-544-XP
B861-XP, B864-XP 1 3/8” – 2” 20-542-XP
2” – 2 1/2” 20-543-XP
B862-XP 1 3/8” – 2” 20-545-XP
2” – 2 1/2” 20-546-XP
M ORTISE
151
Price Book 6
Effective July 9, 2018
L-Series
GRADE 1 MORTISE LEVERED LOCK
L9000-Series
Exploded View - L9050P
Door Preparation
Armor front
Armor screws
Strike screws
Strike
Strike box
Lock case mounting screws
Spindle and spring
Spring cage
Inside lever and bushing
Thumbturn mounting
screws
Thumbturn
Lock case
Compression ring
Compression ring spring
Spindle and spring
Spring cage
Mounting posts
Outside lever and rose
6-Pin full face
mortise cylinder
Inside rose
Mounting screws
Mounting plate
Indicates products that have EPD documentation available and meet LEED v4.
L-1
MORTISE
152
Price Book 6
Effective July 9, 2018
MORTISE
L-Series
Ordering Procedures
To order Schlage products, descriptive data should be in the sequence as shown below.
L-2
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + cylinder code
Outside Des: Outside lever design + rose/escutcheon code
Outside Fin: Outside nish
Inside Des: Inside lever design + rose/escutcheon code, specify only if different from the outside lever design
Inside Fin: Inside lever nish, specify only if different from the outside nish
Hand: Hand of door, specify only for handed lever designs or for LM9300 MultiPoint lock
Latch:
Product armor front, leave blank for standard armor or specify part number if non-standard armor is required. LLL = less armor front
Strike: Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike
Dr Thk: Door thickness, leave blank for standard thickness (1 3/4") or specify if non-standard. Example: 138 = 1 3/8", 214 = 2 1/4"
Ext: Extension, enter one of the following when door thicknesses 2" or greater are specied: EE = Extended Equally, EI = Extended
Inside, EO = Extended Outside
Dim: Dimension; for locks enter only for non-standard strike lip length, for parts enter for non-standard strike lip length, mortise
cylinder or blocking ring length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 L9050P 12A 626 06B 613 RH 09-669 10-072 2 EE 134 KA
M ORTISE
153
Price Book 6
Effective July 9, 2018
Product Identification
L/LV 9 4 53 P
Cylinder Suffix
P = 6-Pin Full Face Mortise
Cylinder with Schlage Logo*
L = Less Full Face Cylinder
C = C
oncealed Mortise Cylinder
W = Less Concealed Cylinder
R = Full Size Interchangeable
Core with Schlage Logo
J = Less Full Size
Interchangeable Core
F = Full Size Interchangeable
Core Less Schlage Logo
T =
Full Size Construction Core
BD = Less SFIC
BDC = Disposable SFIC
GD = Everest 29 Patented SFIC
HD = Construction SFIC
Z = Everest SL 7 pin Cylinder
Function
0 = No Deadbolt
1 = Dummy Trim
4 = With Deadbolt
0 =
Dummy Trim without Lock Case
9 = Functions with Lock Case
Lock Series Prefix
L = Standard
LV = Vandlgard
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
622 (US19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
626AM Antimicrobial Coating on Satin Chromium
629 (US 32) Bright Stainless Steel
630 (US 32D) Satin Stainless Steel
630AM Antimicrobial Coating on
Satin Stainless Steel
643e (US 11) Aged Bronze
Standard Features
Certifications L/LV9000: ANSI/BHMA Certified A156.13-2012, Series 1000, Grade 1 Operational,
Grade 1 Security, UL Listed for 3-hour fire door (except L9076 and L9077).
With FSIC Interchangeable Core Cylinders: Grade 2 Security.
With SFIC Interchangeable Core Cylinders: Grade 3 Security.
L400: ANSI/BHMA Certified A156.36-2010, Grade 1, UL Listed for 3-hour fire door.
Case Size L/LV9000: 4 7/16” x 6 1/16” x 1”; L400: 4 7/16” x 3 5/8” x 1”
Armor Front L/LV9000: 1 1/4” x 8”; L400: 1 1/4” x 5 9/16”
Deadbolt 1” Throw stainless steel
Latchbolt 3/4” Throw stainless steel with anti-friction tongue
Strike L/LV9000: 1 1/4” x 4 7/8” Square corner, 1 3/16” lip, box; L400: 1 1/8” x 3 5/8” square corner, box
Backset 2 3/4”
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 3/4”
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
SFIC = Small Format (Best® Style) Interchangeable Core
BAA/ARRA
Contact your local SSC or
Sales Rep. for ordering details
L
Introduction
L-3
Table of Contents
Functions L-4
Complete Locks L-12
Standard Lever Collection A, B or C Rose Trim .............L-12
Standard Lever Collection Escutcheon Trim ...............L-14
M Lever Collection A, B or C Rose Trim .....................L-16
M Lever Collection Escutcheon Trim .......................L-18
Commercial Lever Suites ................................. L-20
L9000-Series Deadbolt Locks .............................L-21
L400-Series Deadbolt Locks ..............................L-21
Options L-22
Cylinder Options ..........................................L-22
Armor Fronts and Strikes ..................................L-23
Locks Less Components ...................................L-24
Locks Less Lock Case ......................................L-24
Non-Standard Door Thickness ............................L-25
Indicators (for Sectional (rose) or N Escutcheon Trim) ....L-26
Tamper-resistant screws ..................................L-26
Tactile Warning ...........................................L-26
ADA Thumbturn ..........................................L-26
Lever Trak ................................................L-26
Special Functions .........................................L-27
Anti-Microbial Coating ....................................L-27
Lead Lining ...............................................L-27
RX ........................................................L-27
Distributor Pack Program L-28
Lock Cases ............................................... L-29
Trim Packs ............................................... L-30
Armor Fronts, Strikes, Cylinders ........................... L-31
Parts L-32
Miscellaneous Parts .......................................L-32
Levers & Knobs, Roses, Escutcheons ......................L-33
Outside Lever/Knob Assemblies .......................... L-34
Armor Fronts & Strikes ....................................L-35
Buttons, Thumbturns, Coin Turns, Cylinder Turns ..........L-36
Occupancy Indicators .....................................L-37
Thru-Bolts ................................................L-38
Mounting Posts ...........................................L-38
Springs & Spindles ........................................L-38
L Lock Cases ..............................................L-39
Electrified Lock Cases .................................... L-40
Miscellaneous Parts .......................................L-41
Classroom Security Function Conversion Kits ..............L-43
Vandlegard Retrofit kit ....................................L-43
Screw Packs ............................................. L-44
Special Parts ............................................. L-44
Mortise Cylinders ..........................................L-45
Allegion Connect Harnesses .............................. L-46
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
MORTISE
154
Price Book 6
Effective July 9, 2018
L • Functions
ANSI/BHMA Certified A156.13-2012, Series 1000, Grade 1 Operational, Grade 1 Security, UL Listed for 3-hour
fire door (except L9076 and L9077).
SCHLAGE ANSI
Mortise Locks Non-Keyed Mortise Locks Non-Keyed
Mortise Locks Non-Keyed Dummy
L9010 F01
L9025 F31
Passage Latch
Latchbolt retracted by knob/lever
from either side at all times. Inside
knob/lever is always free for imme-
diate egress.
Exit Lock
No outside trim. Aux Latch. Inside
knob/lever only always free for
immediate egress.
SCHLAGE ANSI
L0172 Full Dummy Trim
Knob/lever on both sides fixed by
mounting bar.
L9175 Half Dummy Trim w/ Lock Case
Fixed knob/lever on one side
inoperable. Includes lock case
and armored front.
Options same as L9176 below.
L9176 Full Dummy Trim w/ Lock Case*
Fixed knob/lever on both sides.
Includes lock case and blank armor
front. May be ordered with optional
XL11-743 armored front with cutout to
receive deadbolt.
L9040 F22
LV9040 Bath/Bedroom Privacy Lock
Latchbolt retracted by knob/lever
from either side unless outside is
locked by inside thumbturn.Turning
inside knob/lever or closing door
unlocks outside knob/lever. To
unlock from outside, remove
emergency button, insert emergen-
cy thumbturn(furnished) in access
hole and rotate. Inside knob/lever is
always free for immediate egress.
L9044
LV9044 Privacy With Coin Turn Outside
Latchbolt retracted by knob/lever
from either side unless outside is
locked by inside thumbturn or
outside coin turn. Operating inside
knob/lever, closing door, rotat-
ing inside thumbturn or rotating
outside cointurn unlocks outside
knob/lever.
Specify per L283-056 for Torx®
screws. Available with rose trim
only.
L9440 F19
LV9440 Privacy With Deadbolt
Latchbolt retracted by knob/lever
from either side. Deadbolt thrown
or retracted by inside thumbturn.
Throwing deadbolt locks outside
knob/lever. Rotating inside knob/
lever simultaneously retracts
deadbolt and latchbolt, and
unlocks outside knob/lever. To
unlock from outside, remove
emergency button, insert emer-
gency thumbturn in access hole
and rotate. Inside knob/lever is
always free for immediate egress.
L9444
LV9444 Privacy With Deadbolt and Coin
Turn Outside
Latchbolt retracted by knob/lever
from either side. Deadbolt thrown or
retracted by inside thumbturn or
outside coin turn. Throwing deadbolt
locks outside knob/lever. Rotating
inside knob/lever simultaneously
retracts deadbolt and latchbolt, and
unlocks outside knob/lever. Rotating
outside coin turn retracts deadbolt
and unlocks outside knob/lever.
Specify per L283-056 for Torx screws.
Available with rose trim only. Inside
knob/lever is always free for immedi-
ate egress.
L0170 Half Dummy Trim
Knob/lever on one side fixed by
mounting bar. Not for use on
wood doors, or with L escutcheon
recommend L9175.
* In a double door application where the dummy will be used as the strike,
order 10-091 Armored Front Strike separately.
LV- Vandlgard function allows exterior lever to rotate freely
down, while remaining securely locked.
180 degree messaging indicator available. See options
section for details.
L-4
M ORTISE
155
Price Book 6
Effective July 9, 2018
Functions • L
L9026
L9050 F04
LV9050
Exit Lock with Cylinder
No outside trim. Inside knob/lever
always free for immediate egress.
Outside cylinder retracts latchbolt.
Auxiliary latch deadlocks latchbolt
when door is locked.
Entrance/Office Lock
Latchbolt retracted by knob/lever from
either side unless outside is made inop-
erative by key outside or by
turning inside thumbturn. When
outside is locked, latchbolt is retracted
by key outside or by knob/lever inside.
Outside knob/lever remains locked until
thumbturn is returned to vertical or
unlocked by key. Auxiliary latch dead-
locks latchbolt when door is locked.
Inside knob/lever is always free for
immediate egress.
L9056
LV9056
L9050 With Automatic Unlocking
Latchbolt retracted by knob/lever from
either side unless outside is made inoper-
ative by key outside or by rotating inside
thumbturn. Outside knob/lever unlocked
by key outside, thumbturn or closing door.
Rotating inside knob/lever simultaneously
retracts latchbolt and unlocks outside
knob/lever. Auxiliary latch deadlocks latch-
bolt when door is locked. Inside knob/lever
is always free for immediate egress.
L9070 F05
LV9070 Classroom Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key. Unlocked from outside by key. Inside
knob/lever always free for immediate exit.
Auxiliary latch deadlocks latchbolt when
door is locked. Inside knob/lever is always
free for immediate egress.
L9076 F06
LV9076 Classroom Holdback Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key. When locked, latchbolt retracted by
key outside or knob/lever inside.
Auxiliary
latch deadlocks latchbolt
when door is
locked. Depress inside knob/lever and
turn key 360º for holdback feature.
Inside lever is always free for
immediate egress.
L9080 F07
LV9080
Storeroom Lock
Latchbolt retracted by key outside or by
knob/lever inside. Outside knob/lever
always inoperative. Auxiliary latch
deadlocks latchbolt when door is
locked. Inside knob/lever is always free
for immediate egress.
SCHLAGE ANSI
Mortise Locks-Keyed Mortise Locks-Keyed
SCHLAGE ANSI
L9060 F09
LV9060 Apartment Entrance Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key from inside. When locked, latchbolt
retracted by key outside or knob/lever
inside. Auxiliary latch deadlocks latchbolt
when door is locked. Inside knob/lever is
always free for immediate egress.
L9071 F32
LV9071 Classroom Security Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by key
from either side. Auxiliary latch deadlocks
latchbolt when door is locked. Inside knob/
lever is always free for immediate egress.
L9077
LV9077
Classroom Security
Holdback Lock
Latchbolt retracted by knob/lever
from either side unless outside is
locked by key from either side.
When locked, latchbolt retracted
by key outside or knob/lever inside.
Auxiliary latch deadlocks latchbolt
when door is locked. In locked state,
depress inside knob/lever and turn key
360º to engage holdback and unlock
door. Inside knob/lever is always free
for immediate egress.
* Caution: Double cylinder locks on residences and any door in any
structure which is used for egress are a life safety hazard in times
of emergency and their use is not recommended. Installation
should be in accordance with existing codes only.
LV- Vandlgard function allows exterior lever to rotate freely
down, while remaining securely locked.
L-5
L9082 F30
LV9082 Institution Lock*
Latchbolt retracted by key from
either side. Knob/lever on both sides
always inoperative.
Auxiliary latch deadlocks
latchbolt when door is locked.
MORTISE
156
Price Book 6
Effective July 9, 2018
L9453 F20
LV9453 Entrance/Office Lock with
Deadbolt
Latchbolt retracted by knob/lever from
either side unless outside is locked by
20° rotation of thumbturn. Deadbolt
thrown or retracted by 90° rotation of
thumbturn. When locked, key outside
or knob/lever inside retracts dead-
bolt and latchbolt simultaneously.
Outside knob/lever remains locked
until thumbturn is restored to vertical
position. Throwing deadbolt automati-
cally locks outside knob/lever. Auxiliary
latch deadlocks latchbolt when
door is locked. Inside knob/lever is
always free for immediate egress.
L9456 F13
LV9456 Corridor Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown
or retracted by key outside or inside
thumbturn. Throwing deadbolt locks
outside knob/lever. Turning inside
knob/lever simultaneously retracts
deadbolt and latchbolt and unlocks
outside knob/lever. Inside knob/lever
is always free for immediate egress.
L9465 Closet/Storeroom Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown
or retracted by key outside.
L9473 F21 Dormitory/Bedroom Lock
Latchbolt retracted by knob/lever from
either side. Deadbolt thrown
or retracted by key outside or
thumbturn inside.
SCHLAGE ANSI
Mortise Locks-Keyed with Deadbolt
L9457 F33
LV9457 Classroom Security Lock w/ Deadbolt
Latchbolt retracted by knob/lever
from either side. Deadbolt thrown
or retracted by key from either side. Throwing
deadbolt locks outside knob/lever. Turning
inside knob/lever simultaneously retracts
deadbolt and latchbolt and unlocks outside
knob/lever. Inside knob/lever is always free
for immediate egress.
L9466 F14 Store/Utility Room Lock*
Latchbolt retracted by knob/lever
from either side. Deadbolt thrown or
retracted by key from either side.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only. LV- Vandlgard function allows
exterior lever to rotate freely
down, while remaining
securely locked.
L9458 F34
LV9458 Classroom Security Lock w/
Deadbolt and Auxiliary Latch
Latchbolt operated by lever from
either side except when outside lever
is lock from inside or outside by key.
Deadbolt retracted by key from inside
or outside. Operating inside lever
retracts both bolts and unlocks out-
side. Auxiliary deadlatch when door
is locked. Inside knob/lever is always
free for immediate egress.
Mortise Locks-Keyed with Deadbolt
SCHLAGE ANSI
L9480
LV9480 Storeroom Lock With Deadbolt
Latchbolt retracted by key outside
or by lever or knob inside. Outside knob/
lever always fixed. Deadbolt thrown
or retracted by key outside or thumb-
turn inside. Turning inside knob/lever
simultaneously retracts both deadbolt
and latchbolt. Auxiliary latch deadlocks
latchbolt when door is locked. Inside
knob/lever is always free for immedi-
ate egress.
L9485
LV9485 Faculty Restroom Lock
Latchbolt retracted by key outside
or by knob/lever inside. Outside knob/
lever always fixed. Deadbolt thrown or
retracted by inside thumbturn. When
deadbolt is thrown, all keys become
inoperative except emergency or dis-
play keys. Turning inside knob/lever
retracts both deadbolt and latchbolt
simultaneously. Auxiliary latch
deadlocks latchbolt when door
is locked. Inside knob/lever is always
free for immediate egress. Not
available in SFIC or Everest SL.
180 degree messaging indicator available.
See options section for details.
OCCUPIED
L9486
LV9486 L/LV9485 with 09-611 indicator
Adds 09-611 "Do Not Disturb" indicator
to L/LV9485. Specify L583-375 for
"Occupied". NOTE: This is the "old
style" indicator, not the 180 degree indi-
cator available on most other functions
OCCUPIED
L9496
LV9496
L/LV9456 with 09-611 indicator
Adds 09-611 "Occupied" indicator to L/
LV9456. NOTE: This is the "old style"
indicator, not the 180 degree indicator
available on most other functions
L-6
M ORTISE
157
Price Book 6
Effective July 9, 2018
Functions • L
L-7
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
SCHLAGE ANSI
Mortise Locks-Small Case Deadbolts
L460 E06071 Cylinder x Thumbturn Lock
Deadbolt thrown or retracted by
key outside or thumbturn inside.
L462 E06061 Double Cylinder Lock*
Deadbolt operated by key
from either side.
L463 E06091 Classroom Lock
Deadbolt thrown or retracted by
key from outside. Inside thumbturn
cylinder retracts deadbolt but cannot
project it.
L464 E06081 Cylinder Lock
Deadbolt thrown or retracted by
key from one side. No trim on
opposite side.
L480 Door Bolt
Deadbolt thrown or retracted by
thumbturn from one side. No trim
on opposite side.
ANSI/BHMA Certified A156.5-2001, Grade 1,
UL Listed for 3-hour fire door.
180 degree messaging indicator
available. See options section
for details.
SCHLAGE ANSI
Mortise Locks-Keyed Deadbolts
L9460 F17 Cylinder x Thumbturn Lock
Deadbolt thrown or retracted by key
outside or thumbturn inside.
L9462 F16 Double Cylinder Lock*
Deadbolt operated by key
from either side.
L9463 F29 Classroom Lock
Deadbolt thrown or retracted by
key from outside. Inside thumbturn
cylinder retracts deadbolt but
cannot project it.
L9464 F18 Cylinder Lock
Deadbolt thrown or retracted by
key from one side. No trim on oppo-
site side.
LV- Vandlgard function allows
exterior lever to rotate freely
down, while remaining
securely locked.
OCCUPIED
L496 Deadbolt With “OCCUPIED”
Indicator
Deadbolt thrown or retracted by
key outside or thumbturn inside. When
deadbolt is thrown
“OCCUPIED” plate is displayed.
MORTISE
158
Price Book 6
Effective July 9, 2018
L • Functions
L-8
SCHLAGE
Special Functions
SCHLAGE
Special Functions
L9110 x XL11-741 Double Dummy With Active Trim
Knob/lever both sides always active.
Includes lock case and armor front.
Specify per XL11-741. May be
ordered with optional XL11-743
armor front with cutout to receive
deadbolt only.
L9482 x XL11-543
LV9482 Institution Lock With Deadbolt*
Latchbolt retracted by key from either
side. Knob/lever on both sides always
inoperative. Deadbolt thrown or
retraced by key either side. Auxiliary
latch deadlocks latchbolt when door is
locked. Specify per XL11-543.
L9040 x XL11-446
LV9040 Privacy With Turns Both Sides
Latchbolt retracted by knob/lever
from either side unless outside is
locked by inside or outside
thumbturn. Operating inside knob/
lever, closing door or rotating either
thumbturn unlocks outside knob/lever.
Specify per XL11-446.
L9460 x XL11-635 L9460 With Fixed Dummy Trim
Knob/lever both sides fixed. Deadbolt
thrown or retracted by key outside or
thumbturn inside. Specify per
XL11-635.
L9460, L9462,
L9464 x XL11-886
Deadbolt With Retraction By
Inside Lever or Knob
L9460: Deadbolt thrown or retracted
by key outside or thumbturn inside.
Outside knob/lever always fixed.
Inside knob/lever active when
deadbolt is extended. Rotating inside
knob/lever will retract deadbolt.
L9462: Same as above, except
deadbolt thrown or retracted by key
from either side.
L9464 (shown): Same as above,
except deadbolt thrown or retracted by
key from one side. Specify desired
function per XL11-886.
L9485 x XL11-557 Prison Function Lock
Latch retracted by key outside or knob
inside. Outside knob always free
spinning. Deadbolt only thrown or
retracted by guard’s key. Inside knob
becomes fixed when deadbolt is
thrown. Auxiliary latch deadlocks latch-
bolt when door is locked. Prisoner’s key
only retracts
latchbolt. Furnished standard with
tamper resistant Torx® screws. Specify
per XL11-557. Only available in knob trim.
* Caution: Double cylinder locks on residences and any
door in any structure which is used for egress are a life
safety hazard in times of emergency and their use is not
recommended. Installation should be in accordance with
existing codes only.
L9412 x XL11-907 Exit Lock With Deadbolt
Latchbolt retracted by knob/lever
inside. Outside knob/lever always
fixed. Deadbolt thrown or retracted
by inside thumbturn. Turning inside knob/
lever retracts both deadbolt
and latchbolt simultaneously. Auxiliary
latch deadlocks latchbolt when door is
locked. Specify per XL11-907.
LV- Vandlgard function allows
exterior lever to rotate freely
down, while remaining
securely locked.
Note: 1) For pricing on special functions,
see “Special Options” page
L9066 x XL11-897 Storeroom Lock*
Key in either cylinder locks or unlocks both
levers. When locked, latchbolt retracted
by key either side. Specify per XL11-897.
M ORTISE
159
Price Book 6
Effective July 9, 2018
Functions • L
L-9
L909x EL/EU Electrified Locks
All locks feature automatic detection and operation with 12 or 24V DC, and a case-mounted switch that allows customer selection
of EL (fail safe - power failure allows either knob/lever to retract latchbolt and/or deadbolt) or EU (fail secure - power failure
locks both knobs/levers) operation. Please specify lock function as EL or EU for default switch postion. Locks also come standard
with Allegion Connect molex connector with 3” lead. Allegion Connect is a molex connector system that allows rapid installation
of locks when used with Allegion Connect Harnesses (see page 193) and Allegion Connect Hinges (see Ives pricebook). For more
information speak with your sales representative. The molex connector can also be cut off so that the lock can be installed with
traditional splicing.
Available options for electrified functions: Request to Exit .............. specify RX in the option string
Latchbolt Monitor .........specify LX in the option string
Door Position Sensor ...specify DPS in the option string (non deadbolt models only)
Deadbolt Monitor .........specify DM in the option string (deadbolt models only)
L9090EL
L9090EU
L9093EL
L9093EU
L9091EL
L9091EU
L9094EL
L9094EU
L9092EL
L9092EU
L9492EL
L9492EU
L9095EL
L9095EU
Electrically locking/unlocking
outside lever, no cylinder
Outside knob/lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC.
Inside lever always free for immediate
egress.
Electrically locking/unlocking both
levers, Outside cylinder
Inside and outside knob/lever continu-
ously locked (EL) or unlocked (EU) by
12 or 24V DC. Latchbolt retracted by key
outside. Aux latch deadlocks latchbolt
when door is locked
Electrically locking/unlocking both
levers, no cylinder
Inside and outside knob/lever continu-
ously locked (EL) or unlocked (EU) by 12
or 24V DC.
Electrically locking/unlocking outside
lever, Inside and outside cylinder
Outside knob/lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC.
Latchbolt retracted by key inside or out-
side or knob/lever inside. Aux latch dead-
locks latchbolt when door is locked. Inside
lever always free for immediate egress.
Electrically locking/unlocking
outside lever, Outside cylinder
(replaces L9080EL/EU)
Outside knob/lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC.
Latchbolt retracted by key outside or
knob/lever inside. Aux latch deadlocks
latchbolt when door is locked. Inside
lever always free for immediate egress.
Electrically locking/unlocking outside
lever, outside cylinder, inside thumb-
turn, with deadbolt
Outside knob/lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC.
Deadbolt thrown or retracted by key
outside or thumbturn inside. Turning
inside knob/lever retracts deadbolt and
opens door. When unlocked, rotating
outside lever retracts deadbolt and opens
door. Aux latch deadlocks latchbolt
when door is shut. Inside lever always
free for immediate egress.
L9493EL
L9493EU Electrically locking/unlocking both
levers, outside cylinder, inside thumb-
turn, with deadbolt
Inside and outside knob/lever continuously
locked (EL) or unlocked (EU) by 12 or 24V
DC. Deadbolt thrown or retracted by key
outside or thumbturn inside. When
unlocked, rotating inside or outside lever
retracts deadbolt and opens door.
Aux latch deadlocks latchbolt when door
is shut.
L9494EL
L9494EU Electrically locking/unlocking outside
lever, inside and outside cylinders, with
deadbolt
Outside knob/lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC.
Deadbolt thrown or retracted by key
outside or inside. Turning inside knob/lever
retracts deadbolt and opens door. When
unlocked, rotating outside lever retracts
deadbolt and opens door. Aux latch dead-
locks latchbolt when door is shut. Inside lever
always free for immediate egress.
L9495EL
L9495EU Electrically locking/unlocking both
levers, inside and outside cylinders, with
deadbolt
Inside and outside knob/lever continuously
locked (EL) or unlocked (EU) by 12 or 24V DC.
Deadbolt thrown or retracted by key
outside or inside. When unlocked, rotating
inside or outside lever retracts deadbolt and
opens door. Aux latch deadlocks latchbolt
when door is shut.
Electrically locking/unlocking both
levers, Inside and outside cylinder
(replaces L9082EL/EU)
Inside and outside knob/lever continu-
ously locked (EL) or unlocked (EU) by
12 or 24V DC. Latchbolt retracted by key
inside or outside. Aux latch deadlocks
latchbolt when dooris locked.
MORTISE
160
Price Book 6
Effective July 9, 2018
L • Functions
L-10
LM9300 MultiPoint Lock
For use only with MultiPoint Lock Tornado, Tornado Shutter, Hurricane, or Security solution. Solution requires door and rod set sold
through Steelcraft. Please contact your local sales representative for more details. Please specify handing on order (LM9300
handing not field reversible).
LM9310 Passage Latch
Latchbolt retracted by knob/lever from
either side at all times. Inside and outside
knob/lever Is always free for immediate
egress. Auxiliary latch deadlocks latchbolt
when door is closed.
LM9325 Exit Lock
Latchbolt retracted by knob/lever from
inside at all times. No trim on outside.
Auxiliary latch deadlocks latchbolt when
door is closed.
LM9370
LMV9370 Classroom Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key. When outside is locked, latchbolt is
retracted by key and knob/lever outside
or by knob/lever inside. Inside knob/
lever is always free for immediate egress.
Auxiliary latch deadlocks latchbolt when
door is closed.
LM9371
LMV9371 Classroom Security Lock
Latchbolt retracted by knob/lever from
either side unless outside is locked by
key from either side. When outside is
locked, latchbolt is retracted by key and
knob/lever outside or by knob/lever
inside. Inside knob/lever is always free
for immediate egress. Auxiliary latch
deadlocks latchbolt when door is closed.
LM9380
LMV9380 Storeroom Lock
Latchbolt retracted by outside knob/
lever after key inserted and turned 280°
or anytime by inside lever. Auxiliary
latch deadlocks latchbolt when door is
closed. Inside knob/lever is always free
for immediate egress. Specify handing
on order.
LM9350
LMV9350 Office and Inner Entry Lock
Latchbolt retracted by knob/lever from
either side unless outside is made inop-
erative by key outside or by turning inside
thumbturn. When outside is locked, latch-
bolt is retracted by key and knob/lever
outside or by knob/lever inside. Outside
knob/lever remains locked until thumbturn
is returned to vertical or unlocked by key.
Inside knob/lever is always free for immedi-
ate egress. Auxiliary latch deadlocks latch-
bolt when door is closed.
180 degree messaging indicator
available. See options section
for details.
M ORTISE
161
Price Book 6
Effective July 9, 2018
Functions • L
L-11
this page intentionally left blank
MORTISE
162
Price Book 6
Effective July 9, 2018
L-12
L • Complete Locks Standard Lever Collection* A, B or C Rose Trim
Cast or Forged Lever Designs with Wrought Roses
01
ABC (not available
612 or 613 nish)
Wrought Rose Designs
06
18
Accent (ACC)
Ligature Resistant
Lever SL1
02
07
LAT
Asti (AST)
Ligature Resistant
Knob SK1
03
AVA (ACC lever only) MER (MER lever only)
12
LON
Merano (MER)
41
05
17
OME
42
2 1/8" (54 mm) diameter 2 9/16" (65mm) diameter 2 5/8" (66mm) diameter 2 5/8" (66mm) diameter 2 5/8" (66mm) diameter
2¹¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"4³⁄₄"
2¹³⁄₁₆"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2
⁹⁄₃₂
"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹⁵⁄₁₆"
2¹¹⁄₁₆"
2¹⁄₃₂"
4⁷⁄₈"
2
⁹⁄₁₆
"
4³⁄₄"
2"
4¹⁄₈"
2"
3¹⁄₈"
4¹⁄₂"
3¹⁄₄"
2⁵⁄₁₆"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4⁷⁄₈
"
¹⁄₂"³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
2¹⁄₄"
2³⁄₄"
2¹⁄₈"
2³⁄₄"
Ispecify hand
Not available with C Rose
Ispecify hand Ispecify hand Ispecify hand
Note: Above images shown with A Rose. (except for ligature resistant trim)
M ORTISE
163
Price Book 6
Effective July 9, 2018
L-Series (A, B or C Rose Trim) - Standard Collection levers
Function
Add $93 for Vandlgard Option
Add $947 MultiPoint Lock
Description
Lever or Knob Designs and Finishes
03 06 07
12I 17
OME
03 06 07 12I 17
OME
Ligature-
Resistant
SK1#
Ligature-
Resistant
SL1#
6: 01, 02, 05, 18, 41, 42, LAT*, LON*
ACCI†, ASTI†, MERI†
* Not available 612, 613
† Not available 612, 613, 629, 630
Finishes
626 626 605 606 609
612 619 622
625 643e
613 629
630
630 630
Keyless Functions
L9010 • Passage $558 $668 $680 $698 $1490 $1718
L9025 Exit Lock 433 543 555 573 - -
LM9325 Exit - MultiPoint Lock Only 1,595 1,705 1,717 1,735 - -
L9040 • Privacy 658 768 780 798 1,590 1,818
L9044 • Privacy w/ coin turn 724 834 846 864 - -
L9090&91 EL&EU Electried Lock (keyless) 965 1,075 1,087 1,105 1,897 2,125
L9440 • Privacy w/ deadbolt 774 884 896 914 1,706 1,934
L9444 •Privacy w/ deadbolt and coin turn 838 948 960 978 - -
L0170 Single dummy 184 239 245 255 - -
L0172 Double dummy 375 485 497 515 - -
L9175 Single dummy with case 303 358 364 374 - -
L9176 Double dummy with case 480 590 602 620 - -
Keyed Single Cylinder Functions
L9026P Exit Lock with Cylinder $624 $734 $746 $764 - -
L9050P
•
•
Entrance/Ofce 746 856 868 886 1,678 1,906
L9056P
•
Entrance/Ofce with auto unlocking 825 935 947 965 1,757 1,985
L9070P
•
•
Classroom
746 856 868 886 1,678 1,906L9076P
•
Classroom holdback
L9080P
•
•
Storeroom
L9092P&93P
EL&EU
Electried Lock (outside cylinder) 1,050 1,160 1,172 1,190 1,982 2,210
L9453P
•
Entrance w/ deadbolt
774 884 896 914 1706 1934
L9456P
•
Corridor w/ deadbolt
L9465P Closet/Storeroom w/ deadbolt
L9473P Dorm/Bedroom w/ deadbolt
L9480P
•
Storeroom w/ deadbolt 859 969 981 999 1,791 2,019
L9485P**
•
Faculty Restroom 825 935 947 965 1,757 1,985
L9486P Faculty restroom with 09-611 “Do not disturb” indicator 858 968 980 998 1,790 2,018
L9492P&93P EL&EU Electried lock (outside cylinder, inside thumbturn,
deadbolt) 1,075 1,185 1,197 1,215 2,007 2,235
L9496P Privacy w/ Deadbolt & 09-611 L583-375 “Occupied”
indicator 858 968 980 998 1,790 2,018
Keyed Double Cylinder Functions
L9060P
•
Apartment entrance
$831 $941 $953 $971 $1,763 $1,991
L9071P
•
•
Classroom security
L9077P
•
Classroom security holdback
L9082P
•
Institution
L9094P&95P
EL&EU
Electried Lock (Inside and outside cylinder) 1,135 1,245 1,257 1,275 2,067 2,295
L9457P
•
Classroom security w/ deadbolt 857 967 979 997 1,789 2,017
L9458P
•
Classroom security w/ deadbolt & aux latch
L9466P Storeroom w/ deadbolt 831 941 953 971 1,763 1,991
L9494P&95P EL&EU Electried lock (inside and outside cylinder, deadbolt) 1,161 1,271 1,283 1,301 2,093 2,321
** Specify door hand for faculty restroom locks. Faculty Restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise specied.
Emergency keys must be ordered separately.
# Specify XL11-000 in comments when ordering ligature-resistant knob and XL12-482 when ordering ligature-resistant lever. Price includes lever/knob, thumbturn
& cylinder ring as appropriate. Not available less components or cylinders; less core is available. Mixed trim ligature resistant knob and lever available - specify
both XL11-000 and XL12-482 in comments.
A, B or C Rose Trim Complete Locks • L
L-13
Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $17.00. This does not apply to Primus families.
See Terms and Conditions for more information.
MORTISE
164
Price Book 6
Effective July 9, 2018
L • Complete Locks Standard Lever Collection* Escutcheon Trim
Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons
01
06
18
Accent (ACC)
02
07
LAT
Asti (AST)
03
12
LON
Merano (MER)
41
05
17
OME
42
2¹¹⁄₁₆"
2¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2¹¹⁄₁₆"
2¹⁄₃₂"
2¹⁄₃₂"
4⁷⁄₈"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2¹⁄₄"
2³⁄₄"
2¹⁄₈"
2³⁄₄"
2⁹⁄₁₆"
4³⁄₄"
2⁹⁄₁₆"
4⁷⁄₈"
¹⁄₂"
³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹⁵⁄₁₆"
2¹³⁄₁₆"
1¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"
4³⁄₄"
2¹³⁄₁₆"
2"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2⁹⁄₃₂"
2⁹⁄₃₂"
2¹¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"4³⁄₄"
2¹³⁄₁₆"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2
⁹⁄₃₂
"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹⁵⁄₁₆"
2¹¹⁄₁₆"
2¹⁄₃₂"
4⁷⁄₈"
2⁹⁄₁₆"
4³⁄₄
"
2"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4⁷⁄₈
"
¹⁄₂"³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
2¹⁄₄"
2³⁄₄"
2¹⁄₈"
2³⁄₄"
L N
Cast/Forged (L) or Wrought (N)
Dimensions:
7 15/16” x 1 3/4” x 7/16”
(202mm x 44mm x 11mm)
Dimensions:
7 7/8” x 2 1/2” x 7/16”
(200mm x 64mm x 11mm)
Note: Above images shown with L Escutcheon.
L-14
Ispecify hand
Ispecify hand Ispecify hand Ispecify hand
M ORTISE
165
Price Book 6
Effective July 9, 2018
L or N Escutcheon Trim Complete Locks • L
L-Series (L or N Escutcheon) - Standard Collection Levers
Function
Add $93 for Vandlgard Option
Add $947 MultiPoint Lock
Description
Lever or Knob Designs and Finishes
Standard Lead time: 03, 06, 07, 12I, 17, OME
6: 01, 02, 05, 18, 41, 42, LAT*, LON*, ACCI† , AST I†,
MER I†,
* Not available 612, 613
† Not available 612, 613, 629, 630
Finishes
626 605 606 609
612 619 622 625
643e
613 629 630
Keyless Functions
L9010 • Passage 695 707 725
L9025 Exit Lock 570 582 600
L9040 • Privacy 795 807 825
L9044* •Privacy w/ Coin Turn and Outside Indicator (N Escutcheon Only) 861 873 891
L9444* •Privacy w/ Deadbolt, Coin Turn and Outside Indicator (N Escutcheon Only) 975 987 1,005
L9090&91
EL&EU Electried Lock (keyless) 1,102 1,114 1,132
L9440 • Privacy w/ Deadbolt 911 923 941
L0170 Single Dummy (N Escutcheon Only) 266 272 282
L0172 Double Dummy 512 524 542
L9175 Single Dummy with Case 385 397 415
L9176 Double Dummy with Case 617 629 647
Keyed Single Cylinder Functions
L9026P Exit Lock with Cylinder $761 773 791
L9050P • • Entrance/Ofce 883 895 913
L9056P • Entrance/Ofce w/ Auto Unlocking 962 974 992
L9070P • • Classroom
883 895 913L9076P • Classroom Holdback
L9080P • • Storeroom
L9092P&93P
EL&EU
Electried Lock (outside cylinder) 1,187 1,199 1,217
L9453P •Entrance/Ofce w/ Deadbolt
911 923 941
L9456P • Corridor w/ Deadbolt
L9465P Closet/Storeroom w/ Deadbolt
L9473P Dorm/Bedroom w/ Deadbolt
L9480P • Storeroom w/ Deadbolt 996 1,008 1,026
L9485P** • Faculty Restroom 962 974 992
L9492P&93P
EL&EU Electried lock (outside cylinder, inside thumbturn, deadbolt) 1,212 1,224 1,242
Keyed Double Cylinder Functions
L9060P • Apartment Entrance
$968 $980 $998
L9071P • • Classroom Security
L9077P • Classroom Security Holdback
L9082P • Institution
L9094P&95P
EL&EU
Electried Lock (Inside and outside cylinder) 1,272 1,284 1,302
L9457P • Classroom Security w/ Deadbolt 994 1,006 1,024
L9458P • Classroom Security w/ Deadbolt & Aux Latch
L9466P Storeroom w/ Deadbolt 968 980 998
L9494P&95P
EL&EU Electried lock (inside and outside cylinder, deadbolt) 1,298 1,310 1,328
* Not available less indicator or in 612, 613 nish. Indicator price already included.
** Specify door hand for faculty restroom locks. Faculty restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise. specied.
Emergency keys must be ordered separately.
Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $17.00. This does not apply to Primus families
See Terms and Conditions for more information.
2) L escutcheon available 1 3/8"- 2 1/2" doors non-Vandlgard functions, 1 3/4"-2 1/2" doors on Vandlgard functions. N escutcheon available 1 3/4" - 2 1/4"
non-Vandlgard and Vandlgard functions
L-15
MORTISE
166
Price Book 6
Effective July 9, 2018
L • Complete Locks M Lever Collection* A, B or C Rose Trim
Cast or Forged Lever Designs with Wrought Roses
Wrought Rose Designs
M54
M57
M63
M83
ME1
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
2.125”
5.5”
3.0”
0.4”
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
2.125”
5.5”
3.0”
0.4”
M55
M61
M81
M84
ME2
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
2.125”
5.2”
2.8”
0.4”
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
2.125”
5.2”
2.8”
0.4”
M56
M62
M82
M85
ME3
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
2.125”
5.1”
3.2”
0.4”
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
2.125”
5.1”
3.2”
0.4”
L-16
Ispecify hand Ispecify hand
Ispecify hand
Ispecify hand
A B C (not available 612 or 613 nish)
2 1/8" (54 mm) diameter 2 9/16" (65mm) diameter 2 5/8" (66mm) diameter
Note: Above images shown
with A Rose.
M51
4.5"
2.4"
3.2"
4.5"
2.4"
3.2"
M52
4.5"
2.2"
3"
4.5"
2.2"
3"
M53
3.2”
2.6”
4.35”
3.2”
2.6”
4.35”
M ORTISE
167
Price Book 6
Effective July 9, 2018
L-Series (A, B or C Rose Trim) - M Collection Levers
Function
Add $93 for Vandlgard Option
Add $947 MultiPoint Lock
Description
Lever Designs
Standard Lead time: M51, M52, M81
6: M54, M56, M61I, M63I, M83, M84, M85
6: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3
† Available 629 and 630 only
Finishes
605 606 609 619 622 625 626 629 630 643e
Keyless Functions
L9010
•
Passage 698
L9025 Exit Lock 573
LM9325 Exit - MultiPoint Lock Only 1735
L9040
•
Privacy 798
L9044
•
Privacy w/ Coin Turn 864
L9090&91
EL&EU
Electried Lock (keyless) 1,105
L9440
•
Privacy w/ Deadbolt 914
L9444
•
Privacy w/ Deadbolt and Coin Turn 978
L0170 Single Dummy 255
L0172 Double Dummy 515
L9175 Single Dummy with Case 374
L9176 Double Dummy with Case 620
Keyed Single Cylinder Functions
L9026P Exit Lock with Cylinder $764
L9050P
•
•
Entrance/Ofce 886
L9056P
•
Entrance/Ofce w/ Auto Unlocking 965
L9070P
•
•
Classroom
886 L9076P
•
Classroom Holdback
L9080P
•
•
Storeroom
L9092P&93P
EL&EU
Electried Lock (outside cylinder) 1,190
L9453P
•
Entrance/Ofce w/ Deadbolt
914
L9456P
•
Corridor w/ Deadbolt
L9465P Closet/Storeroom w/ Deadbolt
L9473P Dorm/Bedroom w/ Deadbolt
L9480P
•
Storeroom w/ Deadbolt 999
L9485P**
•
Faculty Restroom 965
L9486P Faculty restroom with 09-611 “Do not disturb” indicator 998
L9492P&93P
EL&EU Electried lock (outside cylinder, inside thumbturn, deadbolt) 1,215
L9496P Privacy w/ Deadbolt & 09-611 L583-375 “Occupied” indicator 998
Keyed Double Cylinder Functions
L9060P
•
Apartment Entrance
$971
L9071P
•
•
Classroom Security
L9077P
•
Classroom Security Holdback
L9082P
•
Institution
L9094P&95P
EL&EU
Electried Lock (Inside and outside cylinder) 1,275
L9457P
•
Classroom Security w/ Deadbolt 997
L9458P
•
Classroom Security w/ Deadbolt & Aux Latch
L9466P Storeroom w/ Deadbolt 971
L9494P&95P
EL&EU Electried lock (inside and outside cylinder, deadbolt) 1,301
** Specify door hand for faculty restroom locks. Faculty restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise specied.
Emergency keys must be ordered separately.
Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $17.00. This does not apply to Primus families.
See Terms and Conditions for more information.
A, B or C Rose Trim - M Collection Complete Locks • L
L-17
MORTISE
Price Book 6
Effective July 9, 2018
168
Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons
L N
Cast/Forged (L) or Wrought (N)
Dimensions:
7 15/16" x 1 3/4" x 7/16"
(202mm x 44mm x 11mm)
Dimensions:
7 7/8" x 2 1/2" x 7/16"
(200mm x 64mm x 11mm)
M51
4.5”
3.2”
2.4”
4.5"
2.4"
3.2"
M54
M57
M63
M83
ME1
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
M52
4.5"
2.2"
3"
M55
M61
M81
M84
ME2
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
M53
3.2”
2.6”
4.35”
M56
M62
M82
M85
ME3
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
4.5”
3”
2.2”
3.2”
2.55”
4.35”
4.35”
2.3”
2.75”
2.125”
2.1”
4.5”
2.9”
4.5”
3.15”
2”
2.125”
4.6”
2.85”
0.4”
5”
3”
0.4”
5”
3.3”
0.3”
4.8”
0.4”
2.9”
2.1”
2.2”
4.8”
2.85”
0.4”
4.5”
3.2”
2”
4.5”
2.6”
1.9”
4.3”
3”
2.1”
2.4” 4.5”
3”
2”
M Lever Collection Escutcheon Trim
L • Complete Locks
L-18
Ispecify hand Ispecify hand
Ispecify hand
Ispecify hand
Note: Above images shown with L escutcheon.
5.4”
3.0”
0.4”
5.2”
2.9”
0.5”
5.0”
3.2”
0.4”
5.4”
3.0”
0.4”
5.2”
2.9”
0.5”
5.0”
3.2”
0.4”
M ORTISE
169
Price Book 6
Effective July 9, 2018
L-Series (L or N Escutcheon Trim) - M Collection Levers
Function
Add $93 for Vandlgard Option
Add $947 MultiPoint Lock
Description
Lever Designs
Standard Lead time: M51, M52, M81
6: M54, M56, M61I, M63I, M83, M84, M85
6: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3
† Available 629 and 630 only
Finishes
605 606 609 619 622 625 626 629 630 643e
Keyless Functions
L9010
•
Passage $725
L9025 Exit Lock 600
L9040
•
Privacy 825
L9044*
•
Privacy w/ Coin Turn and Outside Indicator (N Escutcheon Only) 891
L9444*
•
Privacy w/ Deadbolt, Coin Turn and Outside Indicator (N Escutcheon Only) 1005
L9090&91
EL&EU Electried Lock (keyless) 1132
L9440
•
Privacy w/ Deadbolt 941
L0170 Single Dummy (N Escutcheon only) 282
L0172 Double Dummy 542
L9175 Single Dummy with Case 415
L9176 Double Dummy with Case 647
Keyed Single Cylinder Functions
L9026P Exit Lock with Cylinder $791
L9050P
•
•
Entrance/Ofce 913
L9056P
•
Entrance/Ofce w/ Auto Unlocking 992
L9070P
•
•
Classroom
913L9076P
•
Classroom Holdback
L9080P
•
•
Storeroom
L9092P&93P
EL&EU
Electried Lock (outside cylinder) 1,217
L9453P
•
Entrance/Ofce w/ Deadbolt
941
L9456P
•
Corridor w/ Deadbolt
L9465P Closet/Storeroom w/ Deadbolt
L9473P Dorm/Bedroom w/ Deadbolt
L9480P
•
Storeroom w/ Deadbolt 1,026
L9485P**
•
Faculty Restroom 992
L9492P&93P
EL&EU Electried lock (outside cylinder, inside thumbturn, deadbolt) 1,242
Keyed Double Cylinder Functions
L9060P
•
Apartment Entrance
998
L9071P
•
•
Classroom Security
L9077P
•
Classroom Security Holdback
L9082P
•
Institution
L9094P&95P
EL&EU
Electried Lock (Inside and outside cylinder) 1,302
L9457P
•
Classroom Security w/ Deadbolt 1,024
L9458P
•
Classroom Security w/ Deadbolt & Aux Latch
L9466P Storeroom w/ Deadbolt 998
L9494P&95P
EL&EU Electried lock (inside and outside cylinder, deadbolt) 1,328
* Not available less indicator or in 612, 613 nish. Indicator price already included.
** Specify door hand for faculty restroom locks. Faculty Restroom locks are furnished 0-bitted with two 6-pin keys unless otherwise specied.
Emergency keys must be ordered separately.
Notes: 1) For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $17.00. This does not apply to Primus families.
See Terms and Conditions for more information.
2) L escutcheon available 1 3/8"- 2 1/2" doors non-Vandlgard functions, 1 3/4"-2 1/2" doors on Vandlgard functions.
N escutcheon available 1 3/4" - 2 1/4" non-Vandlgard and Vandlgard functions
L or N Escutcheon Trim - M Collection Complete Locks • L
L-19
MORTISE
170
Price Book 6
Effective July 9, 2018
L • Complete Locks Commercial Lever Suites
L-20
Commercial Lever Suite
Standard Levers
L Mortise LT Tubular ND Cylindrical AL Cylindrical S Tubular
33A/35A, 94/95, 98/99
Exit Devices
(Von Duprin)
01 01 01
02 02 02
03 03 Tubular 03
05 05 05
06 06 Rhodes Saturn Saturn 06
07 07 Athens Jupiter Jupiter 07
12 12 12
17 17 Sparta Neptune Neptune 17
18 18 18
Latitude Latitude Latitude
Longitude Longitude Longitude
Omega Omega Omega Omega 16
Asti Asti Flair Asti
Merano Merano Merano
Accent Accent Accent
M Collection Levers
L Mortise LT Tubular
33A/35A, 94/95, 98/99
Exit Devices
(Von Duprin)
M51 M51 M51
M52 M52 M52
M53 M53 M53
M54 M54 M54
M55 M55 M55
M56 M56 M56
M57 M57 M57
M61 M61 M61
M62 M62 M62
M63 M63 M63
M81 M81 M81
M82 M82 M82
M83 M83 M83
M84 M84 M84
M85 M85 M85
ME1 ME1 ME1
ME2 ME2 ME2
ME3 ME3 ME3
M ORTISE
171
Price Book 6
Effective July 9, 2018
L9000-Series Deadbolt Locks, L400-Series Deadbolt Locks Complete Locks • L
L9000-Series Deadbolt Locks Ligature-
Resistant
Cylinder
Blocking Ring
Finishes
Part Number Description 626
605 606 609
612 619 622
625 643 613 629 630 630
Keyed
L9460P Single cylinder outside, turn inside $424 $430 $440 $812
L9462P Double cylinder 515 521 531 763
L9463PISingle cylinder outside, classroom turn inside 515 521 531 -
L9464P Single cylinder outside, blank inside 351 357 367 485
For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $17.00. This does not apply to Primus families.
See Terms and Conditions for more information.
L400-Series Deadbolt Locks Ligature-
Resistant
Cylinder
Blocking Ring
Finishes
Part Number Description 626
605 606 609
612 619 622
625 643 613 629 630 630
Keyed
L460P Single cylinder outside, turn inside $280 $286 $296 $666
L462P Double cylinder 330 336 346 577
L463PISingle cylinder outside, classroom turn inside 330 336 346 -
L464P Single cylinder outside, blank inside 271 277 287 404
L496P L460 with 09-611 L583-375 “Occupied” indicator 405 411 421 -
Keyless
L480 Door bolt 233 239 249 509
For the Everest 29 T and Everest D family of restricted keyways (Quad, Numbered, Reversed) add $17.00. This does not apply to Primus families.
See Terms and Conditions for more information.
L-21
MORTISE
172
Price Book 6
Effective July 9, 2018
L • Options Cylinder Options
Cylinder Adjustments
Specify Description Lock Price Adjustment
(per cylinder)
Concealed Cylinder (L Escutcheon only)
C Sufx Concealed cylinder for L escutcheon $25.00
Full Size Interchangeable Core (FSIC)
R Sufx Full size core (furnished 1-bitted w/ two 6-pin keys unless otherwise specied) $71.00
J Sufx Less full size core N/C
Full Size Construction Core
T Sufx Full size construction core (assessed handing charge 50-231 per core) $71.00
Small Format Interchangeable Core (SFIC) (Not available with Hotel Functions L9485 or L9486)
GD Sufx Everest patented core (specify key symbol; see Terms & Conditions for more details) $82.00
BD Sufx Less small format core N/C
Small Format Construction Core & Disposable Core
HD Sufx Small format construction core (assessed handing charge 50-231 per core) $43.00
BDC Sufx Small format disposable core N/C
Construction Core Handling Charge
50-231 Handing charge for construction core (assessed per core, non-refundable) $10.10
Notes Control keys are not furnished with locks and must be purchased separately. See Keys & Keying.
Interchangeable cores are not available with concealed cylinders.
Ordering instructions: Add sufx to lock function. Ex: L9050J (L9050 function less full size core)
Primus / Primus XP - available through specic channels based on security levels. See Terms & Conditions for details.
Specify Description Lock Price Adjustment
Full-Face Primus Cylinders
L Sufx Order lock less cylinder; order Primus cylinder 20-787 or 20-793 separately -$83 per cylinder
20-787 Full-face Primus cylinder w/ compression ring & spring (for use with rose trim) 158.00
20-793 Full-face Primus cylinder only (for use with escutcheon trim) 149.00
Concealed Primus Cylinders
W Sufx Order lock less concealed cylinder; order Primus cylinder 20-589 separately $26.00
20-589 Concealed Primus cylinder (for use with L escutcheon w/ concealed cylinder only) 199.00
Full-Size Interchangeable Primus Core
J Sufx Order lock less full size core; order full-size Primus core 20-740 separately N/C for J Sufx
20-740 Full-size interchangable Primus core $148.00
Notes Primus not available for Faculty Restroom function (L9485, L9486)
Ordering instructions: Add sufx to lock function, order Primus cylinder separately.
Ex: L9050W (L9050 function less concealed cylinder) order 20-589 on separate line.
L-22
M ORTISE
173
Price Book 6
Effective July 9, 2018
Armor Fronts, L9000 & L400-Series
Specify Description Lock Price Adjustment
1 1/4" Wide (Standard armor size for 1 3/4" and larger door thicknesses)
09-661 Blank (L9175, L9176)
N/C
09-662 Latch only (L9010, L9040, L9044)
09-663 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082, L9090/91/92/93/95/95*)
09-713 Latch x aux latch (L9076, L9077)
09-664 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496)
09-665 Deadbolt (L9460, L9462, L9463, L9464)
09-666 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486, L9492/93/94/95)
09-717 Deadbolt armor (L460, L462, L463, L464, L480, L496)
1 1/16" Wide (recommended armor size for doors thinner than 1 3/4", including 1 3/8" doors)
09-667 Blank (L9175, L9176)
N/C
09-668 Latch only (L9010, L9040, L9044)
09-669 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082, L9090/91/92/93/94/95*)
09-718 Latch x aux latch (L9076, L9077)
09-670 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496)
09-671 Deadbolt (L9460, L9462, L9463, L9464)
09-672 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486, L9492/93/94/95)
*For L9090/91/92/93/94/95 with DPS use armor 09-666 (1 1/4" wide) or 09-670 ( 1 1/16 wide)
Ordering instructions: Specify on order only if requesting other than default.
10-072
L9000 Standard
10-073
L9000 Deadbolt
Standard
XL11-820 XL11-821 10-079
L400 Deadbolt
Standard
10-078
Strikes, L9000 and L400 Series
Specify Description Lock Price Adjustment
Strikes, L9000 Series
10-072 1 1/4" x 4 7/8" square corner strike + box, 1 3/16" lip length, standard L9000 strike N/C
10-072 xx 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 7/8", 1" or 1 1/2"
10-072 xx 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 1 3/4" or 2" $30.40
10-073 Deadbolt lock strike, standard for L9460, L9462, L9463 and L9464 N/C
10-075 1/2" rabbeted strike 105.00
37-015 Door frame strike reinforcer (nish not applicable) N/C
XL11-8206One hole strike for latching functions, RH & LHR doors 13.00
XL11-8216One hole strike for latching functions, LH & RHR doors
Strikes, L400 Series
10-078 1 1/4" x 4 7/8" square corner strike + box N/C
10-079 1 1/8" x 3 1/2" square corner strike + box, ANSI 115.5 prep, standard L400 strike
Ordering instructions: Specify on order only if requesting other than default.
Armor Fronts and Strikes Options • L
L-23
MORTISE
174
Price Book 6
Effective July 9, 2018
L • Options Locks Less Components, Locks Less Lock Case
Locks Less Components
Description Specify Lock Price Adjustment
Less each knob or lever LLL for knob/lever design
Example: L9050P LLL/03A x 03A -$26.70
Less each rose or escutcheon LLL for rose/escutcheon design
Example: L9050P 03A x 03A/LLL -26.70
Less complete trim one side*
(Less inside trim not recommended as
additional parts may be required)
LLL for complete trim outside
Example: L9050P LLL x 03A -53.40
Less full face cylinder (rose trim) L sufx
Example: L9050L 03A
-83.00
per cylinder
Less full face cylinder L sufx
Example: L9050L 03L
-72.00
per cylinder
Less concealed cylinder
(L escutcheon only)
W sufx
Example: L9050W 03L
-72.00
per cylinder
Less hotel cylinder (rose trim) L sufx, Faculty Restroom Function (L9485 or L9486)
Example: L9485L 03A -119.00
Less hotel cylinder
(escutcheon trim)
L sufx, Faculty Restroom Function (L9485 or L9486)
Example: L9485L 03L -114.00
Less armor front LLL for armor front
Example: L9050P 03A 626 LLL 10-072 -16.30
Less strike LLL for strike
Example: L9050P 03A 612 09-663 LLL -12.80
Less complete trim both sides LLL for complete trim both sides
Example: L9050L LLL 626 LLL 626 09-663 LLL
Lock case, strike and armor front only
Sum of applicable
deducts, use 06A
design and specied nish
for base price.
*L283-150 furnished to mount inside trim when lock is ordered less outside trim for rose designs only. Add $39.20 per lock.
Locks Less Lock Case (Trim Kits)
Function Specify Lock Price Adjustment
L9010 Function, design, nish, LLL for armor, LLL for strike and “less lock case”
Example: L9010 O3A 626 LLL LLL, less lock case
-$171.00
L9040, L9044, L9440, L9444 -214.00
L9050, L9056, L9070, L9076, L9080
Function less cylinder (use L sufx), design, nish, LLL for armor,
LLL for strike, and “less lock case”
Example: L9050L O6L 613 LLL LLL, less lock case
-286.00
L9453, L9456, L9465, L9473, L9480,
L9485, L9486, L9486 “Occupied”, L9496 -311.00
L9060, L9071, L9077, L9082,
L9457, L9466 -351.00
Note: 1) L-Series locks ordered less all components are furnished as lock cases. See L Parts: Lock Cases.
2) Not available with ligature resistant knob (SK1, XL11-000 option) or ligature resistant lever (SL1, XL12-482 option).
Notes: 3) Locks less lock case are furnished less cylinder(s), armor front, and strike. Included are complete sets of outside and
inside trim with spring cages, spindles, mounting screws and thru-bolts as required for the function specified.
4) Deductions are applied to complete lock prices.
5) Not available with SK1, XL11-000 ligature resistant knob trim or SL1, XL12-482 ligature resistant lever trim.
L-24
M ORTISE
175
Price Book 6
Effective July 9, 2018
Non Standard Door Thickness
Specify Description Lock Price
Adjustment
Keyless Functions
1 3/8" 1 3/8" door thickness (not available with LV (Vandlgard) functions) N/C
thickness &
how applied (xx)
For > 1 3/4” - 2 1/2” thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED)
For > 2 1/2” - 4” thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) $99.50
Single Cylinder Functions
1 3/8" 1 3/8" door thickness (not available with LV (Vandlgard) functions) N/C
thickness &
how applied (xx)
For > 1 3/4” - 2 1/2” thick doors
For > 2 1/2” - 4” thick doors - specify (xx) Extended Inside (EI) $99.50
For > 2 1/2" - 4" thick doors - specify (xx) Extended Outside (EO), Equally (EE), or Differently (ED) 486.00
Double Cylinder Functions
1 3/8" 1 3/8" door thickness (not available with LV (Vandlgard) functions) N/C
thickness &
how applied (xx)
For > 1 3/4" - 2 1/2" thick doors
For > 2 1/2" - 4" thick doors - specify (xx) Extended Inside (EI) or Extended Outside (EO) $486.00
For > 2 1/2" - 4" thick doors - specify (xx) Extended Equally (EE) or Extended Differently (ED) 869.00
L400 Deadbolt Functions
Thickness For 1 3/4" - 3" thick doors, Extended Equally only N/C
Notes Price keyed locks less cylinders (L or W sufx) same as keyless locks
Locks furnished Extended Equally unless otherwise specied
Door thickness must be specied in 1/4" increments only, except for 1 3/8" thick doors
Locks w/ N Escutcheon only available for 1 3/4" - 2 3/8" thick doors
Locks with small format interchangable cores (BD, BDC, GD, HD sufx) only available for 1 3/8" - 2 1/4" thick doors, EE & EO only
L9463 function is only available for doors up to 3 5/8" thick extended equally
LV (Vandlgard) option only available for 1 3/4" - 3" thick doors
Ligature resistant knob (SK1) and lever (SL1) only available on 1 3/4" doors
Ordering instructions: Include thickness and how extended in order. EX - L9050P 03A 626 2" EE (L9050P function, 03A trim, 626, for 2" door extended equally).
Options • L
Non-Standard Door Thickness
L-25
MORTISE
176
Price Book 6
Effective July 9, 2018
L • Options Indicators (for Sectional (rose) or N Escutcheon Trim),
Tamper-resistant screws, Tactile Warning, ADA Thumbturn, Lever Trak
Tamper Resistant Torx® Screws
Specify Description Lock Price Adjustment
Torx Screws Torx screws - compatible with armor, strike, rose trim, thumbturns,
L escutcheon trim (1 3/4” doors only) $21.50
Torx Screws + XL11-8486Torx screws for armor, strike, and N escutcheon trim (1 3/4" doors only)
Ordering instructions: include in order under "Additional Details".
Tactile Warning
Specify Description Lock Price Adjustment
'8' lever prex Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17,
18, M51, M52, M81, ME1, ME2, ME3 lever designs
$46.40
Ordering instructions: Preface lever design code with 8. EX - 803, for 03, 806 for 06, 851 for M51, etc.
ADA Thumbturn*
Specify Description Lock Price Adjustment
L583-363 ADA Disability thumbturn option $16.30
* Available w/ all thumbturn functions except L9463 and L463. Not available with ligature-resistant knob (SK1) or lever (SL1)
Ordering instructions: include in order under “Additional Details”.
Folger Adam Co® Lever Trak™
Specify Description Lock Price Adjustment
503 Lever Design Modied inside and outside 03 lever for Folger Adam Co. ® Lever Trak™.
Available rose trim only, not available 629 or 630 nish.
$102.00
Ordering instructions: Specify lever design as 503.
L-26
Indicators (180 degree visibility - for Sectional (rose) or N Escutcheon Trim)
Specify Description Lock Price Adjustment
Inside indicators: Available for L/LV9040, 9044, 9050, 9056, 9060, 9071, 9077, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9466, 9473, 9480, 9485, 9350,
9371, 460, 462, 463, 480
L283-711 LOCKED/UNLOCKED indicator for inside of door $105.00
L283-712 VACANT/OCCUPIED indicator for inside of door 105.00
L283-713 DO NOT DISTURB indicator for inside of door 105.00
L283-714 symbols only indicator for inside of door 105.00
Outside indicators: L/LV9040, 9044, 9050, 9056, 9060, 9070, 9071, 9076, 9077, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9464, 9465, 9466, 9473, 9480,
9485, 9350, 9370, 9371, 460, 462, 463, 464
L283-721 LOCKED/UNLOCKED indicator for outside of door $105.00
L283-722 VACANT/OCCUPIED indicator for outside of door 105.00
L283-723 DO NOT DISTURB indicator for outside of door 105.00
L283-724 symbols only indicator for outside of door 105.00
Notes: 1) Indicators available in all nishes except 612 and 613
2) Indicators used on L9040/L9440 functions use screwdriver for privacy override instead of emergency key
3) Indicator option available either inside or outside of door only.
4) Cylinder and sectional indicators require additional door preparation.
Ordering instructions: add part number under “Additional Details” section of order. EX: L9050P 06N 626 L283-711 adds indicator to the inside (thumbturn side) of lock
Sectional Indicator N Escutcheon Indicator Available Messages
LOCKED/OCCUPIED/DO NOT DISTURB/ lock symbol is white text on red background
UNLOCKED/VACANT/unlocked symbol is black text on white background
DO NOT DISTURB
VACANT
OCCUPIED
UNLOCKED
LOCKED
M ORTISE
177
Price Book 6
Effective July 9, 2018
Special Options
Specify Description Lock Price Adjustment
XL11-422 Nylon latchbolt insert, for use with electric strikes $104.00
XL11-446 L9040 with thumbturn both sides (not available with N escutcheon trim) 436.00
XL11-543 L9482 (L9082 with deadbolt) L9082 + 579.00
XL11-557 L9485 prison function lock. Latch retracted by key outside or knob inside. Outside knob always free spinning.
Deadbolt only thrown or retracted by guard's key. Inside knob becomes xed when deadbolt thrown. Prisoner's
key only retracts latchbolt. Furnished standard with Torx® screws
685.00
XL11-635 L9460 with xed double dummy trim L9456+379.00
XB11-720 L9463 or L463 with B100-series style thumbturn 199.00
XL11-741 L9110 active double dummy trim L9010 +286
XL11-743 Armor front with cutout to receive deadbolt only, for use with dummy functions 128.00
XL11-886 L9460 with trim. Inside knob or lever retracts deadbolt. Outside knob or lever xed. L9456 +$379.00
XL11-886 L9462 with trim. Inside knob or lever retracts deadbolt. Outside knob or lever xed. L9082 + $404.00
XL11-886 L9464 with trim. Inside knob or lever retracts deadbolt. Outside knob or lever xed. L9456 +$379.00
XL11-907 L9412 exit lock with deadbolt for escutcheon designs only L9080 +$367.00
XL11-897 L9066 storeroom lock, latchbolt retracted by key either side L9060 + 431.00
Ordering instructions: Add XL/XB number under "Additional Details" section of order.
Request to Exit (RX), Latchbolt Monitor (LX), Door Position Sensor (DPS), Deadbolt
Monitor (DM)
Specify Description Lock Price Adjustment
L909x and L949x Electried Mortise Options + specied mechanical functions
RX Request to Exit (available all L909x and L949x electried + L9010/50/56/70/71/80 and
L9453/56/58/65/66/80/85 mechanical functions)
$182.00
LX Latchbolt Monitor (available all L909x and L949x electried + L9010/50/56/70/71/80/82 and
L9453/56/65/66/80/85 mechanical functions)
DPS Door Position Sensor (available L909x electried + L9010/80/82 mechanical functions)
DM Deadbolt Monitor (available L949x electried + L9453/56/58/80/85 mechanical functions)
Ordering instructions: include in order under "Additional Details".
Antimicrobial Coating
Specify Description Lock Price Adjustment
626AM or 630AM Rose Trim: Adds silver-ion based anti-microbial coating to inside lever, bushing, rose & thumbturn and outside
lever, bushing, rose, cylinder ring, and cylinder faceplate $49.40
626AM or 630AM Escutcheon Trim: Adds silver-ion based anti-microbial coating to inside lever, bushing, escutcheon & thumbturn
and outside lever, bushing, escutcheon, and cylinder face plate
Ordering instructions: Specify nish as either 626AM or 630AM.
Lead Lining
Specify Description Lock Price Adjustment
XL11-515 xx Lead lining, 1/8" thick installed on L9000 mortise lock case cover. Specify handing (xx) as RH, RR, LH, LR $492.00
XL12-216 xx Lead lining, 1/8" thick installed on L400 mortise deadbolt case cover. Specify handing (xx) as RH, RR, LH, LR
Ordering instructions: add lock handing and appropriate XL # to order. EX: L9050P 03A 626 RH XL11-515 (L9050P, 03A trim, 626, Right Handed, Lead Lining).
Options • L
Special Functions, Anti-Microbial Coating, Lead Lining, RX
L-27
MORTISE
178
Price Book 6
Effective July 9, 2018
L • Distributor Pack Program
L-28
Features
The Schlage Distributor Pack stocking program provides
“flexible inventory” for the L-Series mortise lock. The
Distributor Pack combines the versatile Schlage mortise
lock with a variety of knob or lever options and finishes all
for the same list price as a complete lockset. This allows
you to maximize your mortise lock inventory dollars and
meet your changing customer requirements.
The Distributor Pack is also easy to use. By combining a
few different component parts, you can build a complete
Schlage mortise lock.
How to Build a Mortise Lock with
the Schlage Distributor Pack
STEP 1: Choose lock case required. Schlage mortise
cases must be ordered in multiples of 10 units
each. (Quantity of 1 = 1 lock case.)
STEP 2: Choose the knob/lever and rose/escutcheon trim
designs and finishes. Order one design and
finish in multiples of 4 or 10 units each. (Quantity of
1 = 1 set of outside and inside trim.)
STEP 3: Choose the armor front.
(Quantity of 1 = 10 armor fronts, packed 10 to a box)
STEP 4: Choose the strike.
(Quantity of 1 = 10 strikes, packed 10 to a box)
STEP 5: Choose the cylinder (if required).
(Quantity of 1 = 10 cylinders, packed 10 to a box)
These are the only component parts required to build a
Schlage mortise lock. With five easy steps you can build
your mortise inventory to be flexible and to respond quickly
to your customers.
Miscellaneous parts in bulk quantities are also available for
Schlage mortise locks with the Distributor Pack Program.
(See page L-32 for availability.)
Product Identification
Functions Available
Function Description
L9010B Passage
L9040B Privacy
L9050LB Entrance/Office
L9056LB Entrance/Office w/ Auto Unlocking
L9070LB Classroom
L9080LB Storeroom
L9082LB Institution
L9453LB Entrance
L9456LB Corridor
L9465LB Closet/Storeroom
L9473LB Dormitory/Bedroom
L9480LB Storeroom with Deadbolt
L9485LB Faculty Restroom
Suffix
B = Distributor Pack Lock Case
L = Less Full Face Cylinder
Available Designs and Finishes
Knob/Lever Designs Rose/
Escutcheon
Finishes
Standard 01, 02,03, 05, 06,
07, 12, 17, 18, ACC,
AST, LAT, LON,
MER, STA, OME
A, B, C or L 605, 606, 609,
612, 613, 619, 625,
626, 629, 630,
643e
(not all lever
designs available
in each nish, see
product tables
for exact list)
M
Collection
M51, M52, M53,
M54, M55, M56,
M57, M62, M62,
M63, M81, M82,
M83, M84, M85,
ME1, ME2, ME3
M ORTISE
179
Price Book 6
Effective July 9, 2018
STEP 1 - LOCK CASES (order in multiples of 10)
Part Number Description Price Each
Standard (non-Vandlgard) lock cases
L9010B Passage $140.00
L9040B Privacy 207.00
L9050LB Entrance/ofce 226.00
L9056LB Entrance/ofce with auto unlocking 305.00
L9070LB Classroom 226.00
L9080LB Storeroom
L9082LB Institution 255.00
L9090LB Electried chassis for L9090/L9092/L9094 functions. Specify EL or EU* 529.00
L9091LB Electried chassis for L9091/L9093/L9095 functions. Specify EL or EU*
L9453LB Entrance/ofce with deadbolt
255.00
L9456LB Corridor
L9465LB Closet/Storeroom
L9473LB Dormitory/Bedroom
L9480LB Storeroom with deadbolt
L9485LB Faculty Restroom
Vandlgard lock cases
LV9040B Privacy 304.00
LV9050LB Entrance/ofce 325.00
LV9056LB Entrance/ofce with auto unlocking 402.00
LV9070LB Classroom 325.00
LV9080LB Storeroom
LV9082LB Institution
354.00
LV9453LB Entrance/ofce with deadbolt
LV9456LB Corridor
LV9480LB Storeroom with deadbolt
LV9485LB Faculty Restroom
Notes Lock cases furnished with mounting screws and templates only
Lock cases furnished right hand only
*Electried locks not specied as EL or EU will ship EU
Order instructions: Order part number in quantities of 10
Distributor Pack Program • L
Lock Cases
L-29
MORTISE
180
Price Book 6
Effective July 9, 2018
L • Distributor Pack Program Trim Packs
STEP 2 - Trim Packs (Knob/Lever and Rose/Escutcheon) (order in multiples of 4 or 10)
Standard levers with A or B roses
Part Number Knob/Lever design with rose for use with
03
06 07
12I 17
OME
03 06 07 12I 17
OME
6: 01, 02, 05, 18, 41, 42, LAT*, LON*
ACCI†, ASTI†, MERI†
*not avail 612, 613 †not avail 612, 613, 629, 630
Finishes
626 626
605 606
609 612
619 622
625 643e
613
629
630
09-454 L9010, L/LV9070, L/LV9080, L9090, L9091, L9092, L9093,
L9094, L9095, L9465 $361 $471 $483 $501
09-455 L/LV9040 371 481 493 511
09-456 L/LV9050, L/LV9056, L/LV9456, L9473, L/LV9480, L/LV9485 362 472 484 502
Decorative levers with A or B roses
Part Number Knob/Lever design with rose for use with
Standard Lead time: M51, M52, M81
6: M54, M56, M61I, M63I, M83, M84, M85
6: Available 05/2014: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3
† Available 629 and 630 only
Finishes
605, 606, 609, 619, 622, 625, 626, 629, 630, 643e
09-454 L9010, L/LV9070, L/LV9080, L9090, L9091, L9092, L9093,
L9094, L9095, L9465 $501
09-455 L/LV9040 511
09-456 L/LV9050, L/LV9056, L/LV9456, L9473, L/LV9480, L/LV9485 502
Standard Levers with L or N Escutcheons
Part Number Knob/Lever design with rose for use with
03 06 07 12I 17 OME
6: 01, 02, 05, 18, 41, 42, LAT*, LON*
ACCI†, ASTI†, STAI†, MERI†
*not avail 612, 613 †not avail 612, 613, 629, 630
Finishes
626 605 606 609
612 619 622 625
643e
613
629
630
09-446 L9010, L9090, L9091 $515 $527 $545
09-447 L/LV9040 527 539 557
09-449 L/LV9070, L/LV9080, L9092, L9093, L9465 509 521 539
09-451 L/LV9050, L/LV9056, L/LV9453, L/LV9473, L/LV9480, L/LV9485
Decorative Levers with L or N Escutcheons
Part Number Knob/Lever design with rose for use with
Standard Lead time: M51, M52, M81
6: M54, M56, M61I, M63I, M83, M84, M85
6: Available 05/2014: M53, M55, M57†, M62I†, M82, ME1I, ME2I, ME3
† Available 629 and 630 only
Finishes
605, 606, 609, 619, 622, 625, 626, 629, 630, 643e
09-446 L9010, L9090, L9091 $545
09-447 L/LV9040 557
09-449 L/LV9070, L/LV9080, L9092, L9093, L9465 539
09-451 L/LV9050, L/LV9056, L/LV9453, L/LV9473, L/LV9480, L/LV9485
Notes Split designs/nishes are not available
Includes mounting screws, mounting plates, spring cages, L mounting posts, and strike boxes. For additional vandal resistance, order Vandlgard
mounting posts on page L-32.
Components are for 1 3/4" thick doors only.
Concealed cylinder escutcheons are not available in the distributor pack program.
Order instructions: Specify part number, lever design + rose/escutcheon design, nish, handing if required. EX: 09-446 M61L, 626, RH. Order in quantities of 10.
L-30
M ORTISE
181
Price Book 6
Effective July 9, 2018
STEP 3 - Armor Fronts (part numbers listed are boxes of 10)
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price per box of 10
1 1/4" Wide (Standard armor size for 1 3/4" and larger door thicknesses)
09-473 10 each 09-662 latch only armor for L9010, L/LV9040
$359.00
09-474 10 each 09-663 Latch x aux latch for L/LV9050, L/LV9056,
L/LV9070, L/LV9080, L/LV9082, L9090/91/92/93/94/95*
09-475 10 each 09-664 Latch x deadbolt for L/LV9456, L9465, L9473
09-477 10 each 09-666 latch x aux latch x deadbolt for L/LV9453,
L/LV9480, L/LV9485, L9492/93/94/95
Notes Includes mounting screws
*For L9090/91/92/93/94/95 with DPS use distributor pack armor 09-477
Ordering instructions: Specify part number and nish. Ex: 09-473 626. Each box includes 10 armor fronts.
STEP 4 - Strikes (part numbers listed are boxes of 10)
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price per box of 10
10 each 10-072, 1 1/4" x 4 7/8" square corner strikes, no box
09-494 10 each 10-072 strikes with 1" lip
$218.00 09-494 1316 10 each 10-072 strikes with 1 3/16" lip
09-494 112 10 each 10-072 strikes with 1 1/2" lip
Notes strike box included with distributor pack trim set
Ordering instructions: Specify part number and nish. Ex: 09-494 1316 626. Each box includes 10 strikes.
STEP 5 - Cylinders (part numbers listed are boxes of 10)
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price per box of 10
For use with L9060 keyed functions only
09-484 118 10 each 20-001 cylinders with 1 1/8" cylinder length (use with
rose trim on 1 3/8" -2" thick doors or escutcheon trim on 1 3/8"
thick doors)
$830.00 09-484 114 10 each 20-001 cylinders with 1 1/4" cylinder length (use with
escutcheon trim on 1 3/4" thick doors)
09-484 138 10 each 20-001 cylinders with 1 3/8" cylinder length (use with
escutcheon trim on 2" thick doors)
For use with all keyed functions other than L9060
09-485 118 10 each 30-001 cylinders with 1 1/8" cylinder length (use with
rose trim on 1 3/8" -2" thick doors or escutcheon trim on 1 3/8"
thick doors)
$830.00 09-485 114 10 each 30-001 cylinders with 1 1/4" cylinder length (use with
escutcheon trim on 1 3/4" thick doors)
09-485 138 10 each 30-001 cylinders with 1 3/8" cylinder length (use with
escutcheon trim on 2" thick doors)
Notes Cylinders are C keyway, 6 pin cylinder keyed 5, 0 bitted, and furnished with two 5-pin 0-bitted keys
Ordering instructions: Specify part number and nish. Ex: 09-485 114 619. Each box includes 10 cylinders with compression springs and blocking rings.
Distributor Pack Program • L
Armor Fronts, Strikes, Cylinders
L-31
MORTISE
182
Price Book 6
Effective July 9, 2018
L • Parts Miscellaneous Parts
Miscellaneous Distributor Pack Parts: Escutcheon thru-bolts
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price per box of 50
Box of 50 L escutcheon thru bolts
09-483 138 L escutcheon thru-bolts for 1 3/8" thick doors
$359.00
09-483 134 L escutcheon thru-bolts for 1 3/4" thick doors
09-483 200 L escutcheon thru-bolts for 2" thick doors
09-483 214 L escutcheon thru-bolts for 2 1/4" thick doors
09-483 212 L escutcheon thru-bolts for 2 1/2" thick doors
Ordering instructions: Specify part number and nish. Ex: 09-483 134 626. Each box includes 50 thru bolts.
Miscellaneous Distributor Pack Parts: Mounting Posts & Mounting Screws
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price per box of 50
Mountings posts for Standard L functions (box of 50)
09-488 138 L escutcheon thru-bolts for 1 3/8" thick doors
$566.00
09-488 134 L escutcheon thru-bolts for 1 3/4" thick doors
09-488 200 L escutcheon thru-bolts for 2" thick doors
09-488 214 L escutcheon thru-bolts for 2 1/4" thick doors
09-488 212 L escutcheon thru-bolts for 2 1/2" thick doors
Mountings posts for LV Vandlgard functions (box of 50).
Contact Technical Support
Mounting Screws (box of 100)
09-493 100 each mounting screw L583-066 $40.30
Ordering instructions: Specify part number Ex: 09-488 200 626.
L-32
Electried Distributor Pack Parts: RX Modules and Solid Spindles
Part Number Description List Price
L283-412 10 pack RX modules p/n L283-452 $1,455.00
L283-450 10 pack solid spindle and spring p/n L283-054 (for use with L9091, L9093, L9095 only; supports 1 3/8” - 3” door thickness) 36.40
M ORTISE
183
Price Book 6
Effective July 9, 2018
Levers & Knobs, Roses, Escutcheons
Levers & Knobs
Style Lever & Knob Design 605 606 609 612 613 619 622 625 626 629 630 643e
Standard 016, 026, 03*, 056, 06, 07, 12I, 17, 18, 416, 426, OME6••••••••••••
LAT6, LON6••• •••••••
ACCI, ASTI, MERI••• •••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, M856I, ME16I, ME26I, ME36••• •••••••
M576I, M626I • •
6Extended Factory Lead Time Ispecify handing
Part
Number Description Standard Levers Decorative Levers
09-401 Outside lever, retaining clip, insertion tool $176 $191
09-402 Inside lever+bushing, mounting plate, screw pack, spanner wrench
*Available modied for Folger Adam Co.® Lever Track™. Specify 503 design and add $51.00. Not available in 629 or 630 nish.
** Knobs and levers default for 1 3/4" doors. Knobs also available for 1 3/8" doors, levers for 1 3/8", 2", 2 1/4" and 2 1/2" doors.
Ordering instructions: Specify part number, lever style, nish, door thickness if not 1 3/4”. Ex: 09-401 03 626.
Roses
Style Rose Design 605 606 609 612 613 619 622 625 626 629 630 643e
Standard A, B, C ••••••••••• •
Decorative MER, AVA ••• ••• • •
Part
Number Description Standard and Decorative
09-403 Inside Rose (includes mounting plate and screws)
$98.70
09-404 Outside Rose+Bushing
09-508 Blank Outside Rose (not available MER or AVA)
Ordering instructions: Specify part number, lever design + rose, nish. Ex: 09-404 03A 626. Lever design must be specied for proper bushing.
Escutcheons
Available nishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description L Escutcheon N Escutcheon
Outside Escutcheon & Bushing
09-636 Blank x lever or knob
$176 $176
09-637 Emergency turn x lever or knob
09-638 Concealed cylinder x lever or knob
09-639 Full face cylinder x lever or knob
Inside Escutcheon
09-632 Blank x lever or knob
176
176
09-633** Thumbturn x lever or knob
09-634** Thumbturn x blank
09-635 Full face cylinder x lever or knob 176
L583-187 Concealed cylinder x lever or knob
** Specify door thickness: 1 3/8" or 1 3/4"
Ordering instructions: Specify part number, lever + escutcheon style, nish. Ex: 09-639 03L 626 (full face cylinder, 03 lever, L escutcheon, 626 nish).
Parts • L
L-33
MORTISE
184
Price Book 6
Effective July 9, 2018
L • Parts Outside Lever/Knob Assemblies
Outside Lever/Knob and Rose/Escutcheon Assemblies
Style Lever & Knob Design 605 606 609 612 613 619 622 625 626 629 630 643e
Standard 016, 026, 03, 056, 06, 07, 12I, 17, 18, 416, 426, OME6••••••••••••
LAT6, LON6••• •••••••
ACCI, ASTI, MERI••• •••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, M856I, ME16I, ME26I, ME36••• •••••••
M576I, M626I • •
6Extended Factory Lead Time Ispecify handing
Part
Number Description Standard Levers Decorative Levers
With A, B or C rose
09-506 Outside Lever assembly $195 $210
With Avanti or Merano Rose
09-655 Outside lever assembly for AST w/Avanti rose or MER w/Merano rose
only 195 N/A
With L or N Escutcheon
09-550 Blank
259 274
09-551 Emergency turn
09-552 Concealed cylinder (L escutcheon only)
09-553 Full face cylinder
Ordering instructions: Specify part number, lever style, rose/escutcheon, nish. Ex: 09-506 M53A 626 (outside assembly, M53 lever, A rose, 626 nish).
L-34
M ORTISE
185
Price Book 6
Effective July 9, 2018
Armor Fronts & Strikes Parts • L
Armor Fronts, L9000 & L400-Series
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
1 1/4” Wide (Standard armor size for 1 3/4” and larger door thicknesses)
09-661 Blank (L9175, L9176)
$35.90
09-662 Latch only (L9010, L9040, L9044)
09-663 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080, L9082,
L9090/91/92/93/94/95*)
09-713 Latch x aux latch (L9076, L9077)
09-664 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496)
09-665 Deadbolt (L9460, L9462, L9463, L9464)
09-666 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486,
L9492/93/94/95)
09-717 Deadbolt armor (L460, L462, L463, L464, L480, L496)
1 11/16” Wide (armor size for doors thinner than 1 3/4", including 1 3/8" doors)
09-667 Blank (L9175, L9176)
35.90
09-668 Latch only (L9010, L9040, L9044)
09-669 Latch x aux latch (L9050, L9056, L9060, L9070, L9071, L9080,
L9082L9090/91/92/93/94/95*)
09-718 Latch x aux latch (L9076, L9077)
09-670 Latch x deadbolt (L9440, L9444, L9456, L9457, L9465, L9466, L9473, L9496,
L9492/93/94/95)
09-671 Deadbolt (L9460, L9462, L9463, L9464)
09-672 Latch x aux latch x deadbolt (L9453, L9458, L9480, L9485, L9486)
*For L9090/91/92/93/94/95 models with DPS, use armor 09-666 (1 1/4" wide) or 09-670 ( 1 1/16 wide)
Ordering instructions: Specify part number and nish. Ex: 09-662 626.
Strikes, L9000 and L400 Series
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
Strikes, L9000 Series
10-072 1316
1 1/4" x 4 7/8" square corner strike + box. 1 3/16" lip length , standard L9000 strike
21.80
10-072 xx
1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 7/8", 1" or 1 1/2"
21.80
10-072 xx 1 1/4" x 4 7/8" square corner strike + box; specify lip length (xx) as 1 3/4" or 2" 55.80
10-073 Deadbolt lock strike, standard for L9460, L9462, L9463 and L9464 26.60
10-075 1/2" rabbeted strike (for 1 3/4" doors, use with 1 1/16" armor front. Use 1 1/4"
armor front for over 1 3/4"-2 1/4" doors extended equally) 144.00
10-091I1 1/4" x 8" square corner armor strike, no box. Specify handing to inactive door 97.60
K510-066 Strike box (nish not applicable) 6.60
37-015 Door frame strike reinforcer (nish not applicable) 24.30
Strikes, L400 Series
10-078 1 1/4" x 4 7/8" square corner strike + box, $21.90
10-079
1 1/8" x 3 1/2" square corner strike + box, ANSI 115.5 prep , standard L400 strike
K510-053 Strike box for 10-079 strike (nish not applicable) 6.60
K510-066 Strike box for 10-078 strike (nish not applicable)
Ordering instructions: Specify part number, lip length if required, and nish. Ex: 10-072 1316 626.
L-35
10-072
L9000 Standard 10-073
L9000 Deadbolt
Standard
10-079
L400 Deadbolt
Standard
10-078 10-091
MORTISE
186
Price Book 6
Effective July 9, 2018
K510-330 09-509 09-509
w/ ADA Thumbturn (L583-363) L283-124 09-900
L • Parts Buttons, Thumbturns, Coin Turns, Cylinder Turns
Emergency Button, Thumbturns, Coin Turns & Cylinder Turns
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
Emergency Button & Emergency Turn Tool
K510-330 Emergency Button, L9040 and L9440 $14.80
L583-233 Emergency turn tool for L9040 and L9440. Specify nish as 458. 18.50
Thumbturns
09-509 027 Thumbturn for rose trim, 1 3/8"- 1 7/8" door range, extended equally
69.00
09-509 033 Thumbturn for rose trim, >1 7/8"- 2 3/8" door range, extended equally
09-509 040 Thumbturn for rose trim, >2 3/8"- 2 7/8" door range, extended equally
09-509 047 Thumbturn for rose trim, >2 7/8"- 3 5/8" door range, extended equally
L583-363
Sufx ADA thumbturn upgrade, specify thumbturn p/n + L583-363 Add $16.30 to 09-509 price
Coin Turns
L283-124 19 Coin turn, L9044 and L9444, 1 3/8" - 1 1/2" door range, extended equally (EE)
119.00
L283-124 23 Coin turn, L9044 and L9444, 1 5/8" - 1 7/8" door range, extended equally (EE)
L283-124 25 Coin turn, L9044 and L9444, >1 7/8" - 2 1/8" door range, extended equally (EE)
L283-124 31 Coin turn, L9044 and L9444, >2 1/8" - 2 5/8" door range, extended equally (EE)
L283-124 37 Coin turn, L9044 and L9444, >2 5/8" - 2 7/8" door range, extended equally (EE)
L283-124 43 Coin turn, L9044 and L9444, >2 7/8" - 3 3/8" door range, extended equally (EE)
L283-124 48 Coin turn, L9044 and L9444, >3 3/8" - 3 5/8" door range, extended equally (EE)
L283-056 19 Coin turn w/ torx screws, L9044 and L9444, 1 3/8" - 1 1/2" door range, EE
130.00
L283-056 23 Coin turn w/ torx screws, L9044 and L9444, 1 5/8" - 1 7/8" door range, EE
L283-056 25 Coin turn w/ torx screws, L9044 and L9444, >1 7/8" - 2 1/8" door range, EE
L283-056 31 Coin turn w/ torx screws, L9044 and L9444, >2 1/8" - 2 5/8" door range, EE
L283-056 37 Coin turn w/ torx screws, L9044 and L9444, >2 5/8" - 2 7/8" door range, EE
L283-056 43 Coin turn w/ torx screws, L9044 and L9444, >2 7/8" - 3 3/8" door range, EE
L283-056 48 Coin turn w/ torx screws, L9044 and L9444, >3 3/8" - 3 5/8" door range, EE
EE = Extended Equally
Note: Coin turns not available in 612 or 613 finish
Cylinder Turns I
09-487 xx Cylinder coin turn, specify dimension (xx) as 1 1/8", 1 1/4” or 1 3/8" (replaces XL12-196) $120.00
09-900 xx Cylinder turn, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 117.00
09-900 xx Cylinder turn, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 179.00
09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 127.00
09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 186.00
09-905 Cylinder turn w/ compression ring and 1/8" blocking ring for 1 3/4" doors 138.00
ISpecify door hand for cylinder turns if used with L463 or L9463.
Note: Cylinder turns not available in 612, 613, 629 or 630 finish
L-36
M ORTISE
187
Price Book 6
Effective July 9, 2018
L-37
Sectional Indicator N Escutcheon Indicator Available Messages
LOCKED/OCCUPIED/DO NOT DISTURB/ lock symbol is white text on red background
UNLOCKED/VACANT/unlocked symbol is black text on white background
DO NOT DISTURB
VACANT
OCCUPIED
UNLOCKED
LOCKED
Occupancy Indicators Parts • L
Occupancy Indicators - 180 degree visibility (for Sectional (rose) or N Escutcheon trim)
Part Number Description
605 606 609 619 622 625 626 629 630 643e
••••••••• •
Sectional trim - cylinder trim, for inside or outside of door
L283-413 Indicator, Sectional, Cylinder - LOCKED/UNLOCKED
$105.00
L283-414 Indicator, Sectional, Cylinder - OCCUPIED/VACANT
L283-415 Indicator, Sectional, Cylinder - DO NOT DISTURB
L283-416 Indicator, Sectional, Cylinder - symbols only
Sectional trim - thumbturn, for inside of door
L283-417 Indicator, Sectional, Thumbturn - LOCKED/UNLOCKED
$105.00
L283-418 Indicator, Sectional, Thumbturn - OCCUPIED/VACANT
L283-419 Indicator, Sectional, Thumbturn - DO NOT DISTURB
L283-420 Indicator, Sectional, Thumbturn - symbols only
Sectional trim - cointurn, for outside of door
L283-421 Indicator, Sectional, Cointurn - LOCKED/UNLOCKED
$105.00
L283-422 Indicator, Sectional, Cointurn - OCCUPIED/VACANT
L283-423 Indicator, Sectional, Cointurn - DO NOT DISTURB
L283-424 Indicator, Sectional, Cointurn - symbols only
Sectional trim - privacy, for outside of door (NOTE: emergency override by small screwdriver, not emergency key)
L283-425 Indicator, Sectional, Privacy - LOCKED/UNLOCKED
$105.00
L283-426 Indicator, Sectional, Privacy - OCCUPIED/VACANT
L283-427 Indicator, Sectional, Privacy - DO NOT DISTURB
L283-428 Indicator, Sectional, Privacy - symbols only
Escutcheon trim - cylinder trim, for inside of door
L283-433 Indicator, N Escutcheon, Inside Cylinder - LOCKED/UNLOCKED
$240.00
L283-434 Indicator, N Escutcheon, Inside Cylinder - OCCUPIED/VACANT
L283-435 Indicator, N Escutcheon, Inside Cylinder - DO NOT DISTURB
L283-436 Indicator, N Escutcheon, Inside Cylinder - symbols only
Escutcheon trim - thumbturn trim, for inside of door
L283-437 Indicator, N Escutcheon, Thumbturn - LOCKED/UNLOCKED
$240.00
L283-438 Indicator, N Escutcheon, Thumbturn -OCCUPIED/VACANT
L283-439 Indicator, N Escutcheon, Thumbturn - DO NOT DISTURB
L283-440 Indicator, N Escutcheon, Thumbturn - symbols only
Escutcheon trim -cylinder trim, for outside of door. (NOTE: Available 626 or 630 nish, with 03, 06, or 17 levers. Other levers/nishes require extended leadtimes.)
L283-429 Indicator, N Escutcheon, Outside Cylinder - LOCKED/UNLOCKED
$321.00
L283-430 Indicator, N Escutcheon, Outside Cylinder - VACANT/OCCUPIED
L283-431 Indicator, N Escutcheon, Outside Cylinder - DO NOT DISTURB
L283-432 Indicator, N Escutcheon, Outside Cylinder - symbols only
Escutcheon trim -cointurn, for outside of door. (NOTE: Available 626 or 630 nish, with 03, 06, or 17 levers . Other levers/nishes require extended leadtimes.)
L283-441 Indicator, N Escutcheon, Cointurn - LOCKED/UNLOCKED
$321.00
L283-442 Indicator, N Escutcheon, Cointurn - VACANT/OCCUPIED
L283-443 Indicator, N Escutcheon, Cointurn - DO NOT DISTURB
L283-444 Indicator, N Escutcheon, Cointurn - symbols only
Escutcheon trim -privacy, for outside of door. (NOTE: Available 626 or 630 nish, with 03, 06, or 17 levers. Other levers/nishes require extended leadtimes.)
L283-445 Indicator, N Escutcheon, Privacy - LOCKED/UNLOCKED
$321.00
L283-446 Indicator, N Escutcheon, Privacy - VACANT/OCCUPIED
L283-447 Indicator, N Escutcheon, Privacy - DO NOT DISTURB
L283-448 Indicator, N Escutcheon, Privacy - symbols only
ADA Thumbturn
L583-363 sufx ADA thumbturn upgrade; specify indicator w/ thumbturn p/n + L583-363 Add $16.30 to price
Note: Addition of indicator may require additional door preparation. See installation instructions on-line for details
Ordering Instructions: Specify part number and nish. EX: L283-437 L583-363 626 for N Esctuchen Locked/Unlocked indicator w/ ADA thumbturn in 626. Outside escutcheon indicators also
require lever design EX: L283-441 03 626 for N escutcheon cointurn indicator with 03 lever in 626 nish
Parts
L583-709 Message sign, LOCKED/UNLOCKED, for 180 degree indicator
$29.20
L583-710 Message sign, OCCUPIED/VACANT, for 180 degree indicator
L583-711 Message sign, DO NOT DISTURB/blank, for 180 degree indicator
L583-712 Message sign, symbols only, for 180 degree indicator
L583-705 Cam, 180 degree indicator, thumbturn and cointurn indicators 2.90
L283-561 Cam and retaining ring kit, 180 degree indicator, cylinder and privacy indicators 3.80
L283-736 Screw pack consisting of (2)L583-759 Mounting Plate Screws, (2)L583-
899 Mounting Plate Screws, and (2)L583-755 Trim Screws(specify nish) 18.70
L583-579 Sectional mounting plate screw, top 3.50
L583-757 Sectional mounting plate screw, bottom 3.50
L583-717 Sectional mounting plate, cylinder indicator 46.60
L583-752 Sectional mounting plate, coin/privacy/thumbturn indicator 46.60
MORTISE
188
Price Book 6
Effective July 9, 2018
Thru-Bolts, Mounting Posts, Springs & Spindles
Parts • L
Escutcheon Thru-Bolts
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
L Escutcheon Thru-bolts: two required per lock
L583-119 L escutcheon thru bolts for 1 3/8" door thickness
$6.00
L583-120 L escutcheon thru bolts for 1 3/4" door thickness
L583-121 L escutcheon thru bolts for 2" door thickness
L583-122 L escutcheon thru bolts for 2 1/4" door thickness
L583-123 L escutcheon thru bolts for 2 1/2" door thickness 7.10
L583-287 L escutcheon mounting screws for L9175 half-dummy function 5.30
N Escutcheon Thru-Bolts: two required per lock
K510-389 N escutcheon thru bolts for 1 3/4" door thickness 7.10
K510-390 N escutcheon thru bolts for 2" to 2 1/4" door thickness
L583-133 N Escutcheon mounting screws for L0170 single dummy function 0.90
Ordering instructions: Specify part number and nish. Ex: L583-120 626.
Mounting Posts (Ferrules)
Part
Number Description Price Each
L Mounting Posts (Ferrules): two required per lock
L583-211 Mounting post for 1 3/8" door thickness
$11.40
L583-212 Mounting post for 1 3/4" door thickness
L583-213 Mounting post for 2" door thickness
L583-214 Mounting post for 2 1/4" door thickness
L583-215 Mounting post for 2 1/2" door thickness
L583-216 Mounting post for 2 3/4" door thickness
L583-217 Mounting post for 3" door thickness
L583-218 Mounting post for 3 1/4" door thickness 29.10
L583-219 Mounting post for 3 1/2" door thickness
LV Mounting Posts (Ferrules): two required per lock
L583-497 LV mounting post for 1 3/4" door thickness
$23.90
L583-498 LV mounting post for 2" door thickness
L583-499 LV mounting post for 2 1/4" door thickness
L583-500 LV mounting post for 2 1/2" door thickness
L583-501 LV mounting post for 2 3/4" door thickness
L583-502 LV mounting post for 3" door thickness
L583-503 LV mounting post for 3 1/4" door thickness 31.50
L583-504 LV mounting post for 3 1/2" door thickness
Ordering instructions: Specify part number.
Spindle & Springs
Part
Number Description Price Each
Spindle & Spring Kits (qty two each)
L283-198 Spindles and springs for 1-3/8" - 1 7/8" doors $15.50
L283-199 Spindles and springs for 2" - 3 1/2" doors 18.30
Spindles & Springs (qty one each)
L283-060 Spindle and spring for 1 3/8" - 1 7/8" doors (two required per lock) $7.80
L283-061 Spindle and spring for 2" - 3 1/2" doors (two required per lock) 9.60
L283-064 Spindle and spring, L0172, L9091/93/65, L9493/95 (one required per lock) 13.70
L283-065 Spindle and spring, L0170 half dummy (one required per lock) 7.30
Ordering instructions: Specify part number.
L-38
Occupancy Indicator - “old style” (for Sectional (rose) trim)
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part Number Description Price Each
09-611 "Do Not Disturb" occupancy indicator for rose trim. Includes driver bar L583-245 $111.00
09-611 L583-375 "Occupied" occupancy indicator for rose trim. Includes driver bar L583-245 130.00
09-611 XL11-986 "Locked" occupancy indicator for rose trim. Includes driver bar L583-245
L583-245 Occupancy indicator driver bar 5.50
Ordering instructions: Specify part number and nish. Ex: 09-611 L583-375 626
M ORTISE
189
Price Book 6
Effective July 9, 2018
L Lock Cases Parts • L
Lock Cases
Part Number Lock Function and Description Price Each
L283-039 L9076, Classroom holdback $373.00
L9077, Classroom security holdback
L283-062 L9440, Privacy with deadbolt 337.00
L9444, Privacy with deadbolt and coin turn
L283-099 L460, L462, L463, L464, L480, L496, Deadbolt 220.00
L283-126 L9056, Entrance w/ simultaneous retraction 373.00
L283-131 L9010, Passage 215.00
L283-132 L9040, Privacy 314.00
L9044 Privacy with Coin turn
L283-133
L9050, Ofce
373.00
L9060, Apartment entrance
L9070, Classroom
L9071, Classroom security
L283-134 L9080, Storeroom 373.00
L9026 Exit Lock with Cylinder
L283-137 L9453, Entrance 408.00
L283-138
L9456, Corridor
546.00L9457, Classroom security
L9496, Privacy w/ “Occupied” indicator
L283-139 L9460, L9462, L9463, L9464, Deadbolt 282.00
L283-140
L9465, Closet
408.00L9466, Storeroom
L9473, Dormitory
L283-141
L9480, Storeroom with deadbolt
514.00L9485, Faculty Restroom
L9486, Faculty Restroom
L283-144 L9175, Single dummy 317.00
L283-145 L9176, Double dummy 317.00
L283-146 L9082, Institution 373.00
L283-310 L9458, Classroom security w/ deadbolt and aux latch 408.00
L283-314 LM9310, Passage 1,158.00
LM9325, Exit
L283-316
LM9350, Ofce and Inner Entry
1,357.00
LM9370, Classroom
LM9371, Classroom Security
LM9380, Storeroom
L283-725 L9025 Exit Lock 256.00
Notes 1) Includes lock case only. Armors, strikes, mounting screws, and cylinders must be ordered separately.
2) All lock cases are shipped right hand.
LV Lock Cases
Part Number Lock Function and Description Price Each
L283-170
LV9050, Ofce and Inner Entry Lock
$469.00
LV9060, Apartment Entrance Lock
LV9070, Classroom Lock
LV9071, Classroom Security Lock
L283-171 LV9040, Bath/Bedroom Privacy Lock 412.00
LV9044, Privacy Lock With Coin Turn Outside
L283-172 LV9076, Classroom Holdback Lock 469.00
LV9077, Classroom Security Holdback Lock
L283-173 LV9080, Storeroom Lock 469.00
L283-176 LV9453, Entrance Lock 506.00
L283-177
LV9456, Corridor Lock
506.00LV9457, Classroom Security Lock
LV9496, LV9486 Lock With “OCCUPIED” Indicator
L283-178
LV9480, Storeroom Lock With Deadbolt
610.00LV9485, Faculty Restroom
LV9486, Faculty Restroom w/”Do Not Disturb” Indicator
L283-180 LV9056, LV9050 Lock With Simultaneous Retraction 469.00
L283-181 LV9440, Privacy Lock With Deadbolt 433.00
LV9444, Privacy Lock With Deadbolt and Coin Turn Outside
L283-182 LV9082, Institution Lock 469.00
L283-311 LV9458, Classroom security w/ deadbolt and aux latch 506.00
L283-317
LMV9350, Ofce and Inner Entry
1,454.00
LMV9370, Classroom
LMV9371, Classroom Security
LMV9380, Storeroom
L-39
MORTISE
190
Price Book 6
Effective July 9, 2018
Electried Lock Cases
Part Number Lock Function and Description Price Each
L283-347 L9090/L9092/L9094 electried chassis. Specify EL (electrically locking) or EU (electrically unlocking) 675.00
L283-392 L9090/92/94 electried chassis w/ RX. Specify EL or EU operation 856.00
L283-393 L9090/92/94 electried chassis w/ LX. Specify EL or EU operation 856.00
L283-479 L9090/92/94 electried chassis w/ DPS. Specify EL or EU operation. 856.00
L283-394 L9090/92/94 electried chassis w/ RX & LX. Specify EL or EU operation 1,038.00
L283-481 L9090/92/94 electried chassis w/ RX & DPS. Specify EL or EU operation 1,038.00
L283-483 L9090/92/94 electried chassis w/ RX, LX & DPS. Specify El or EU operation 1,222.00
L283-395 L9091/L9093/L9095 electried chassis. Specify EL (electrically locking) or EU (electrically unlocking) 675.00
L283-396 L9091/93/95 electried chassis w/ RX. Specify EL or EU operation 856.00
L283-397 L9091/93/95 electried chassis w/ LX. Specify EL or EU operation 856.00
L283-480 L9091/93/95 electried chassis w/ DPS. Specify EL or EU operation 856.00
L283-398 L9091/93/95 electried chassis w/ RX & LX. Specify EL or EU operation 1,038.00
L283-482 L9091/93/95 electried chassis w/ RX & DPS. Specify EL or EU operation 1,038.00
L283-484 L9091/93/95 electried chassis w/ RX, LX & DPS. Specify EL or EU operation 1,222.00
L283-467 L9492/94 electried chassis. Specify EL or EU operation 712.00
L283-469 L9492/94 electried chassis w/ RX. Specify EL or EU operation 895.00
L283-471 L9492/94 electried chassis w/ DBM. Specify EL or EU operation 895.00
L283-473 L9492/94 electried chassis w/ RX & DBM. Specify EL or EU operation 1,076.00
L283-475 L9492/94 electried chassis w/ RX, LX & DBM. Specify EL or EU operation 1,258.00
L283-468 L9493/95 electried chassis. Specify EL or EU operation 712.00
L283-470 L9493/95 electried chassis w/ RX. Specify EL or EU operation 895.00
L283-472 L9493/95 electried chassis w/ DBM. Specify EL or EU operation 895.00
L283-474 L9493/95 electried chassis w/ RX & DBM. Specify EL or EU operation 1,076.00
L283-476 L9493/95 electried chassis w/ RX, LX & DBM. Specify EL or EU operation 1,258.00
L Lock Cases
Parts • L
L-40
M ORTISE
191
Price Book 6
Effective July 9, 2018
Miscellaneous Parts Parts • L
L-41
Miscellaneous Parts
Part Number Description Price Each
36-080 O-ring, L9080 EL/EU $3.00
39-042 Plastic lock case cover for display - for locks manufactured after January, 1998 92.10
K110-550 Pack of truarc ring (1), spacer (2), knobs 8.40
K510-320 Wood plug, dummy, L0170, L0172 8.60
K510-842 Electried lock bushing, L9080 EL/EU 1.20
L283-003 Deadbolt (except L9453, L9465, L9466, L9473) 56.30
L283-004 Entrance deadbolt, L9453 56.30
L283-006 Auxiliary latchbolt assembly 17.90
L283-008 Latchbolt assembly (except L9076) 56.30
L283-010 Locking link, L9076 18.20
L283-029 (2) Spacers for ANSI A115.1 metal door preparations 35.90
L283-030 Pack of 20 truarc rings, levers 21.30
L283-031 Mounting plate, inside lever 19.50
L283-040 Spring cage (1 required per lever) 9.60
L283-049 Latchbolt assembly, L9076 56.30
L283-055 Cylinder retainer plate and screw - for locks manufactured after April, 1994 17.90
L283-057 (2) Mounting Post, (2) Screws, L-Series, OSU 28.00
L283-075 Deadbolt, L9465, L9466, L9473 56.40
L283-112 Lock case, L9000-Series - for locks manufactured after January, 1998. 56.40
L283-127 Lock case and cover, L400-Series 80.90
L283-128 Lock case, L400-Series. See L283-127 for sellable part. —
L283-150 Mounting plate for inside rose trim on one side of door only 39.20
L283-452 RX Module for L909x series electried mortise 182.00
L583-004 Standoff post 2.40
L583-015 Latchbolt guide 3.70
L583-748 Retractor hub (2 required per lock) - replaces L583-019 4.20
L583-020 Retractor hub spacer 4.40
L583-021 Retractor lever 3.80
L583-022 Retractor rocker 3.00
L583-023 Blocking plates 3.70
L583-024 Retractor link 7.80
L583-025 Retractor crank 7.80
L583-026 Hub spring 1.50
L583-027 Fire door fuse 2.50
L583-028 Fire door catch 3.00
L583-029 Turn hub 19.10
L583-030 Entrance hub 15.40
L583-031 Cam follower 10.30
L583-035 Turn hub spring 3.70
L583-038 Auxiliary bar guide 2.90
L583-043 Locking catch, L9080 EL/EU 19.00
L583-044 Stop spring 1.80
L583-045 Locking catch (except L9080 EL/EU) 19.50
L583-047 Catch spring 4.40
L583-048 Locking link (except L9076) 4.40
L583-049 Entrance link 7.30
L583-050 Link pin 1.80
L583-051 Transfer lever 1.80
L583-053 Simultaneous retractor (except L9040 and L9056) 7.80
L583-056 Catch pin 3.80
L583-057 Spindle anchor 30.60
L583-058 Simultaneous retractor, L9040, L9056 8.20
L583-063 Spring retainer, L9080 EL/EU 8.50
L583-064 Solenoid spring, L9080 EL/EU 2.80
MORTISE
192
Price Book 6
Effective July 9, 2018
L-42
Miscellaneous Parts (cont’d)
Part Number Description Price Each
L583-065 Electried link, L9080 EL/EU $11.80
L583-066 Mounting plate screw (2 required per lock) 1.40
L583-156 Transfer lifter 7.20
L583-174 Holdback dog, L9076 6.00
L583-192 Dog spring, L9076 0.60
L583-196 Auxiliary stop 5.90
L583-286 Mounting bar, L0170, L0172 23.90
L583-290 Mounting plate screw, knob dummy trim, L0170, L9175 1.50
L583-291 Mounting plate screw, lever dummy trim, L0170, L9175 1.50
L583-321 Mounting plate, inside knob 7.20
L583-322 Spacer for xed levers 3.80
L583-426 Faceplate tab 1 1/4” - for locks manufactured after July, 1994 5.10
L583-427 Faceplate tab 1 1/16” - for locks manufactured after July, 1994 5.90
L583-454 Case cover screw (4 required per L9000-Series lock case; 3 required per L400-Series lock case) 1.50
L583-468 Dummy spindle anchor 130.00
L583-481 Cylinder retainer screw - for locks manufactured after April, 1994 2.80
L583-485 Lock handing screw - for locks manufactured after April, 1994 1.70
L583-490 Cylinder retainer - for locks manufactured after January, 1998 7.00
L583-492 Cylinder retainer screw plate - for locks manufactured after April, 1994 3.40
L583-494 Lock case cover, L400-Series. See L283-127 for sellable part. 25.00
L583-496 Lock case cover, L9000-Series - for locks manufactured after January, 1998 38.90
L583-760 DPS magnet 15.20
L583-761 DPS magnet tray 15.20
Ligature Resistant Conversion Kits - for 1-3/4” thick doors only
Part Number Converts Contents
Conversion
Instructions Price Each
Convert to SK1 Ligature Resistant Knob
09-155 L9010, L9060, L9070, L9071, L9076,
L9077, L9080, L9092EL/EU L9082,
L9095EL/EU, L9176, L9457, L9458, L9465,
L9466, L9482, to
ligature resistant
(2) ligature resistant knob assemblies
(2) ligature resistant blocking rings
See
instruction
sheet
$1,212.00
09-156 L9050, L9056, L9412, L9453, L9456,
L9460 w/ pull, L9473, L9480, L9485, to
ligature resistant
(2) ligature resistant knob assemblies
(1) ligature resistant blocking ring
(1) ligature resistant thumbturn assembly 1,518.00
09-159 L9040, L9440 to ligature resistant (2) ligature resistant knob assemblies
(1) ligature resistant thubturn assembly
(1) emergency ADA turn
(1) emergency button
1,518.00
Convert to SL1 Ligature Resistant Lever
09-138 L9010, L9060, L9070, L9071, L9076,
L9077, L9080, L9092EL/EU, L9082,
L9095EL/EU, L9176, L9457, L9458, L9465,
L9466, L9482, to ligature resistant
(2) ligature resistant lever assemblies
(2) ligature resistant blocking rings
(2) trim ferrules
See
instruction
sheet
$1,580.00
09-139 L9050, L9056, L9412, L9453, L9456,
L9460 w/ pull, L9473, L9480, L9485, to
ligature resistant
(2) ligature resistant lever assemblies
(1) ligature resistant blocking ring
(1) ligature resistant thumbturn assembly
(2) trim ferrules
1,886.00
09-189 L9040, L9440 to ligature resistant ligature resistant lever assemblies
(1) ligature resistant thubturn assembly
(1) emergency ADA turn
(1) emergency button (2) trim ferrules
1,886.00
Deadbolt conversion to Ligature Resistant
09-157 L462, L464, L9462, L9464 to ligature
resistant
(2) ligature resistant blocking rings $144.00
09-158 L460, L480, L9460 to ligature resistant (1) ligature resistant blocking ring
(1) ligature resistant thumbturn assembly 756.00
Notes 1) For 1 3/4” doors w/ sectional trim only.
2) Available in 630 (Satin Stainless Steel) or 630AM (Satin Stainless Steel Anti-Microbial) nish only.
3) If applicable please specify “P” for (P) cylinder types, “R” for (R,J,F,T) cylinder types, and “BD” for (BD, BDC, GD, HD) cylinder types
following the part number. Not available with the “L” cylinder option (lock less cylinder).
Miscellaneous Parts (continued)
Parts • L
M ORTISE
193
Price Book 6
Effective July 9, 2018
L-43
Classroom Security Function Conversion Kits, Vandlegard Retrofit kit Parts • L
Classroom Security Function Conversion Kits
Part Number Converts Contents Conversion Instructions Price Each
Rose Trim
38-090 L9070P to L9071P
L9076P to L9077P
(1) 30-001-118 Cylinder
(2) 36-082-018 Blocking Ring
Add cylinder and 1 blocking ring
to inside. Add 1 blocking ring to outside. $120.00
38-091 L9070R to L9071R
L9076R to L9077R
(1) 30-008 Cylinder
(2) 36-082-050 Blocking Ring
Add cylinder and 1 blocking ring
to inside. Use 1 blocking ring to replace
existing outside blocking ring.
194.00
38-092 L9070BD to L9071BD
L9076BD to L9077BD
(1) 80-108 Cylinder
(2) 36-082-050 Blocking Ring 120.00
L Escutcheon Trim
38-093 L9070P to L9071P
L9076P to L9077P
(1) 30-001-118 Cylinder (includes
Compression Spring and Ring)
(1) 36-082-012 Blocking Ring
(1) 09-635 Escutcheon
Replace existing inside escutcheon.
Add cylinder and compression spring only to
inside. Add compression ring only to outside.* $271.00
38-094 L9070R to L9071R
L9076R to L9077R
(1) 30-008 Cylinder
(1) 36-082-012 Blocking Ring
(1) 09-635 Escutcheon
Replace existing inside escutcheon.
Add cylinder and blocking ring to inside. 271.00
38-095 L9070BD to L9071BD
L9076BD to L9077BD
(1) 80-108 Cylinder
(1) 09-635 Escutcheon
Replace existing inside escutcheon.
Add cylinder to inside. 193.00
* Also add blocking ring to outside of 1 5/8” doors. Use compression spring only on outside of 1 7/8” doors.
Notes 1) Specify nish and keying.
2) Subject to same discount as L-Series Locks.
3) Use of these kits requires drilling hole in door for inside cylinder.
Vandlgard Retrot Kit - Specify door thickness (1 3/4” - 3 5/8”) when ordering
Part Number Converts Contents
Conversion
Instructions Note Price Each
Rose Trim
39-034 L to LV
L9040 L9076 L9496
L9044 L9080 L9060
L9440 L9453 L9071
L9444 L9456 L9077
L9050 L9480 L9082
L9056 L9485 L9457
L9070 L9486
(1) L283-200 Mounting Post Pack
(
1) L583-345 24061897 Catch Retractor
(1) L283-147 Retractor Assembly
(1) L583-383 Crank Retractor
(1) L583-386 Bottom Hub
(1) L583-387 Top Hub
(1) P515-528 Handing Label
(1) P515-683 Instruction Sheet
Please refer to
instruction sheet.
For L9080, L9480,
L9485 and L9486
functions,
add to kit
(1) L283-040 Spring
Cage.
$61.90
39-234 L9082 and L9482 to
LV9082 and LV9482
(1) L283-200 Mounting Post Pack
(1) L583-346 Spacer
(1) L583-386 Bottom Hub
(1) L583-387 Top Hub
(1) P515-528 Handing Label
(1) P515-683 Instruction Sheet
Please refer to
instruction sheet. For
rst time users, an
instructional video is
available.
Add to kit
(2) L283-040 Spring
Cages 56.80
LM9300 Three-Point Lock Parts
Part Number Description List
24358830 LM9300 rodset 6' 8" - 8' 0" doors, 39" centerline $2,282.00
24457715 LM9300 rodset 4' 0" - 5' 11" doors, 26" centerline 2,282.00
24457723 LM9300 rodset 3' 1" - 3' 11" doors, 15" centerline 2,282.00
24353625 LM9300 strike package (top and bottom strikes, oor, anchors, screws) 110.00
Note LM9300 rodsets require specially prepped door from Steelcraft
MORTISE
194
Price Book 6
Effective July 9, 2018
L • Parts Screw Packs & Special Parts
L-44
Screw Packs
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
Standard Screw Packs
C203-736 Lock Case Screws: contains (2) C603-256, #12-24 WMS PFH.
Specify 455 Finish. $6.40
C203-736 Strike Screws: Contains: (2) C603-256, #12-24 WMS PFH.
K110-020 Armor Front Screws: Contains (2) K510-210, #8-32 x 1/4" MS PFH 0.88
K110-947 Rose Trim Thumbturn screws: Contains: (2) K510-445, #4 x 1/2" POH AB 8.00
L283-100 Trim Mount Screws & Posts, 1 3/4” door:
Contains: (2) L583-066, #8-32 x 1/2” PFH
(2) L583-212, 1 3/4” posts.
Finish not required.
28.00
L283-101 L escutcheon thru-bolts, 1 3/4” doors
Contains: (2) L583-120 11.20
L283-154 xx
Part pack for L mortise. Specify nish (xx)
Contains: (2) spindles, (2) spindle spring, (2) ferrules, (2) ferrule screws,
(2) mounting screws, (2) armor screws, (2) strike screws
43.70
L583-585 Set screw, SK1 knob / SL1 lever 4.50
MS = Metal Screw WMS = Wood/Metal Screw PFH = Phillips Flat Head POH = Phillips Oval Head
Torx® Screw Packs*
L283-121
Rose trim w/o thumbturn.
Contains: (2) armor screws, #8-32 x 1/4” (T-15)
(2) strike screws, #12-24 x 1/2” (T-20)
$21.50
L283-122
Rose trim w/ thumbturn.
Contains: (2) armor screws, #8-32 x 1/4” (T-15)
(2) strike screws, #12-24 x 1/2” (T-20)
(2) thumbturn screws, #4 x 1/2” (T-8)
L283-123
L Escutcheon for 1 3/4” doors.
Contains: (2) armor screws, #8-32 x 1/4” (T-15)
(2) esc. screws, 1/4-28 x 2 1/8” (T-30)
(2) strike screws, #12-24 x 1/2” (T-20)
XL11-8486
N Escutcheon for 1 3/4” doors.
Contains: (2) armor screws, #8-32 x 1/4” (T-15)
(2) strike screws, #12-24 x 1/2” (T-20)
(2) esc. screws, #8-32 x 1 1/2” (T-20)
* Torx screw packs furnished with appropriate T-xx installation tool.
6Extended lead time
Ordering instructions: Specify part number and nish. Ex: L283-123 626.
Special Parts
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
XL11-422 Solid latchbolt (nylon insert) for use with electric strikes.
Finish not required. Price listed is adder to lock $104.00
XB11-720 Mortise cylinder turn unit with ADA compliant style thumbturn.
Price listed is adder to 09-900, 09-904, 09-905 or 09-907 117.00
XK10-992 10-072 strike with >2" thru 6" lip. Specify lip length on order 197.00
XL11-515 1/8" thick lead plate. Specify lock function and door hand on order 492.00
XL11-634 Blank inside L escutcheon 307.00
XL11-636 Blank outside L or N escutcheon. Specify L or N on order. 421.00
XL11-743 Armor front with cutout to receive deadbolt only, for use with L9110, L9175
and L9176 dummy functions 128.00
XL11-820 Strike, 1 3/16" lip, one hole for latching functions, RH & LHR doors 41.50
XL11-821 Strike, 1 3/16" lip, one hole for latching functions, LH & RHR doors
M ORTISE
195
Price Book 6
Effective July 9, 2018
Mortise Cylinders Parts • L
L-45
Mortise Cylinders
Cam Description Cylinder Mechanism Complete Cylinder
Price Each
Open Restricted
L583-474
For cyl. length 1 1/8”,
1 3/8”, 1 5/8”
L583-475
For cyl. length 1 1/4”,
1 1/2”, 1 3/4”
Cylinder Only:
L & N Escutcheons
Standard 30-021 $72.00 $89.00
Primus Controlled Access 20-793 149.00
Primus XP Controlled Access 20-793-XP
Primus UL437 20-593 181.00
Primus XP UL437 20-593-XP
Hotel Function (Standard) 30-022I114.00 131.00
Cylinder With
Compression
Ring & Spring:
Rose Trim
Standard 30-001 83.00 100.00
Everest 29 SL (R/B Keyways only) 91-062 $100.00
Primus Controlled Access 20-787 158.00
Primus XP Controlled Access 20-787-XP
Everest 29 SL Primus XP (R/B Keyways only) 91-757-XP $158.00
Primus UL437 20-587 189.00
Primus XP UL437 20-587-XP
Primus Lockout 20-717 214.00
Primus XP Lockout 20-717-XP
Primus UL437 Lockout 20-517 230.00
Primus XP UL437 Lockout 20-517-XP
Hotel Function (Standard) 30-002I119.00 136.00
Schlage L9060 Outside and Other Straight Cam Applications
L583-476
For cyl. length 1 1/8",
1 3/8", 1 5/8"
L583-477
For cyl. length 1 1/4",
1 1/2", 1 3/4"
Cylinder Only:
L & N Escutcheons
Standard 26-021 $72.00 $89.00
Everest 29 SL (R/B Keyways only) 91-059
Primus Controlled Access 20-701 149.00
Primus XP Controlled Access 20-701-XP
Primus XP Everest 29 SL (R/B Keyways only) 91-759-XP 181.00
Primus UL437 20-501 181.00
Primus XP UL437 20-501-XP
Cylinder With
Compression
Ring & Spring:
Rose Trim
Standard 20-001 83.00 100.00
Everest 29 SL (R/B Keyways only) 91-051 100.00
Primus Controlled Access 20-700 158.00
Primus XP Controlled Access 20-700-XP
Primus XP Everest 29 SL (R/B Keyways only) 91-751-XP 181.00
Primus UL437 20-500 189.00
Primus XP UL437 20-500-XP
Primus Lockout 20-715 214.00
Primus XP Lockout 20-715-XP
Primus UL437 Lockout 20-515 230.00
Primus XP UL437 Lockout 20-515-XP
Notes: Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $44.00. See Special Cylinders for 2" - 5" long cylinders.
1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness.
See page CYL-36 for required dimension.
SL cylinders available in 1 1/8" and 1 1/4" lengths only
L583-274
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
YX
L583-275
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
YX
Dim. X = .261
Y = .644
Dim. X = .261
Y = .644
L583-274
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
YX
L583-275
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
YX
Dim. X = .261
Y = .644
Dim. X = .261
Y = .644
X
Y
DIM X = 0.35” DIM Y = 0.72”
DIM X = 0.35” DIM Y = 0.72”
X
Y
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
MORTISE
196
Price Book 6
Effective July 9, 2018
L • Parts Allegion Connect Harnesses
L-46
Allegion Connect Harnesses - Prices listed are net, discounting does not apply
Part Number Description Price Each
Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors)
CON-6 6" Wire Harness (internal p/n 106190-00) $10.50
CON-12 12" Wire Harness (internal p/n 106191-00) 14.00
CON-26 26" Wire Harness (internal p/n 106192-00) 15.80
CON-32 32" Wire Harness (internal p/n 106193-00) 16.90
CON-38 38" Wire Harness (internal p/n 106194-00) 18.50
CON-44 44" Wire Harness (internal p/n 106195-00) 18.00
CON-50 50" Wire Harness (internal p/n 106196-00) 18.50
CON-192 192" Wire Harness (internal p/n 106197-00) 44.20
Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors)
CON-6P 6" Wire Harness (internal p/n 106201-00) $13.40
CON-12P 12" Wire Harness (internal p/n 106202-00) 16.90
CON-26P 26" Wire Harness (internal p/n 106203-00) 18.50
CON-32P 32" Wire Harness (internal p/n 106204-00) 19.80
CON-38P 38" Wire Harness (internal p/n 106205-00) 20.30
CON-44P 44" Wire Harness (internal p/n 106206-00) 20.90
CON-50P 50" Wire Harness (internal p/n 106207-00) 21.50
CON-192P 192" Wire Harness (internal p/n 106208-00) 46.50
Harness with Molex Connector on one end, stripped leads on other (for connection to power supply)
CON-6W 6" extension to power supply (internal p/n 106210-00) $13.40
Service Kit
CON-KIT Connector Service Kit (internal p/n 050823-00-00) contains:
-100 each male & female terminals
-10 each 4-pin and 8-pin male connectors
-10 each 4-pin and 8-pin female connectors
- 1 extraction tool"
$111.00
MULITIPOINT
197
Price Book 6
Effective July 9, 2018
For Two
Point Latch
Application
For Wood Fire Door
Applications
LM9200 • Series
LM9200-1
Concealed two-point latching system for wood or hollow metal doors
NOTE: LM9200 series requires unique factory-prepped doors; please contact sales representative for list of compatible door manufacturers.
MULITIPOINT
198
Price Book 6
Effective July 9, 2018
LM9200-2
LM9200 • Series
Ordering Procedures
To order Schlage products, descriptive data should be in the sequence as shown below.
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + cylinder code. No sufx is required for non-rerated wood or hollow metal doors; use 'F' sufx for rerated
wood doors and 'M' sufx for rerated hollow metal doors.
Outside Des: Outside lever design + rose/escutcheon code
Outside Fin: Outside nish
Inside Des: Inside lever design + rose/escutcheon code; specify only if different from outside
Inside Fin: Inside nish; specify only if different from outside
Hand: Hand of door (LH, LR, RH, RR)
Latch:
specify LBL (Less Bottom Latch) if top-latch only solution desired
Strike: Not applicable; product ships with standard strikes only
Dr Thk: Door Thickness; leave blank for standard thickness (1 3/4") or specify if non standard. Example: 200 = 2", 214 = 2 1/4"
Ext: Extension, enter one of the following when door thckness 2" or greater are specied: EE = Extended Equally, EI = Extended Inside,
EO = Extended Outside
Dim: Height of door (6'8"-10'0" for non-re rated openings, 6'8"-8'0" for re rated openings)
Additional
Details:
Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 1 LM9250P 06A 626 17B 643e RH LBL – 134 – 7'0" KA
MULITIPOINT
199
Price Book 6
Effective July 9, 2018
LM9200-3
LM9200
Introduction
Product Identification
LM92 50 F P
Cylinder Suffix
P = 6-Pin Full Face Mortise
Cylinder with Schlage Logo*
L = Less Full Face Cylinder
W = Less Concealed Cylinder
R = Full Size Interchangeable
Core with Schlage Logo
J = Less Full Size
Interchangeable Core
F = Full Size Interchangeable
Core Less Schlage Logo
T =
Full Size Construction Core
BD = Less SFIC
BDC = Disposable SFIC
GD = Everest 29 Patented SFIC
HD = Construction SFIC
Z = Everest SL 7 pin Cylinder
UL Listing Suffix
F = UL Listed for wood doors
M = UL listed for hollow metal doors
Function
Lock Series Prefix
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US10) Satin Bronze
613 (US10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
622 (US19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
626AM Antimicrobial Coating on Satin Chromium
629 (US 32) Bright Stainless Steel
630 (US 32D) Satin Stainless Steel
630AM Antimicrobial Coating on
Satin Stainless Steel
643e (US 11) Aged Bronze
Standard Features
Certifications Wood door applications: available UL listed for 60 minute fire door with two point
latch or 20 minute fire door with top latch only.
Hollow metal door applications: available UL listed for 90 minute fire door with two point latch, one point latch,
or double egress with astragal.
Case Size 4 7/16" x 12 3/8" x 1"
Armor Front 1 1/4" x 15 7/8"
Backset 2 3/4"
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different
Door Range 1 3/4"
Keys Two nickel silver cut keys per lock, 6 pin, S123 section
SFIC = Small Format (Best® Style) Interchangeable Core
BAA/ARRA
Contact your local SSC or
Sales Rep. for ordering details
NOTE: LM9200 only available in US and Canada
Table of Contents
Functions LM-4
Complete Locks LM-6
Standard Lever Collection A, B or C Rose Trim ............LM-6
Standard Lever Collection Escutcheon Trim ..............LM-8
M Lever Collection A, B or C Rose Trim ................... LM-10
M Lever Collection Escutcheon Trim ..................... LM-12
Options LM-14
Cylinder Options ........................................LM-14
Locks Less Components .................................LM-15
Non-Standard Door Thickness .......................... LM-15
Indicators (for Sectional (rose) or N Escutcheon Trim) ..LM-16
Tactile Warning .........................................LM-16
ADA Thumbturn ........................................LM-16
Lever Trak ..............................................LM-16
Anti-Microbial Coating ..................................LM-16
Parts LM-17
Levers & Knobs, Roses, Escutcheons .................... LM-17
Outside Lever/Knob Assemblies ......................... LM-18
Armor Fronts & Strikes ..................................LM-18
Buttons, Thumbturns, Coin Turns, Cylinder Turns ........LM-19
Occupancy Indicators ...................................LM-19
Thru-Bolts ..............................................LM-20
Mounting Posts .........................................LM-20
Springs & Spindles ......................................LM-20
Lock Cases .............................................. LM-21
Latch Kits ............................................... LM-21
Strikes .................................................. LM-21
Cables ..................................................LM-21
Fire Rated Components ................................. LM-21
Miscellaneous Parts .....................................LM-22
Mortise Cylinders ........................................LM-23
Allegion Connect Harnesses .............................LM-24
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
MULITIPOINT
200
Price Book 6
Effective July 9, 2018
LM9200 • Series Functions
LM9200-4
Mechanical Functions
LM9210 Passage Lock
Latches retracted by lever from either side at
all times. Inside lever always free for immediate
egress.
LM9270 Classroom Lock
Latches retracted by lever from either side unless
outside is made inoperative by key outside.
Outside lever remains locked until unlocked by
key. Inside lever always free for immediate egress.
LM9225 Exit Lock
Latches retracted by lever from inside at
all times. No trim on outside. Not available
escutcheon trim.
LM9271 Classroom Security Lock
Latches retracted by lever from either side unless
outside is made inoperative by key from either
side. Outside lever remains locked until unlocked
by key either side. Inside lever always free for
immediate egress.
LM9250 Office/Entry Lock
Latches retracted by lever from either side unless
outside is made inoperative by key outside or by
turning inside thumbturn. Outside lever remains
locked until thumbturn is returned to vertical
or unlocked by key. Inside lever always free for
immediate egress.
LM9280 Storeroom Lock
Latches retracted by outside lever after key
inserted and turned 280° or by inside lever. Inside
lever always free for immediate egress. Specify
handing on order.
LM9256 Office/Entry with automatic unlocking
Latches retracted by lever from either side unless
outside is made inoperative by key outside or by
turning inside thumbturn. Outside lever remains
locked until thumbturn is returned to vertical,
unlocked by key, or rotating inside lever. Inside
lever always free for immediate egress.
MULITIPOINT
201
Price Book 6
Effective July 9, 2018
Series Functions • LM9200
LM 9200-5
LM9290EL
LM9290EU
Electrically locking/unlocking outside lever,
no cylinder
Outside lever continuously locked (EL)
or unlocked (EU) by 12 or 24V DC. EL is fail safe
(power failure allows outside lever to retract
latchbolt); EU is fail secure (power failure
locks outside lever). Inside lever always free for
immediate egress.
LM9293EL
LM9293EU
Electrically locking/unlocking both levers,
Outside cylinder
Inside and outside lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC. Latchbolt
retracted by key outside. EL is fail safe (power
failure allows either lever to retract latchbolt); EU
is fail secure (power failure locks both levers).
LM9291EL
LM9291EU
Electrically locking/unlocking both levers,
no cylinder
Inside and outside lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC. EL is fail
safe (power failure allows either lever to retract
latchbolt); EU is fail secure (power failure locks
both levers).
LM9294EL
LM9294EU
Electrified outside levers lock two-point
latch (inside and outside cylinder)
Electrically locking/unlocking outside lever only.
Latchbolt(s) retracted by outside key and lever,
by electrically unlocking door, and by outside
lever when electrically unlocking or anytime
by inside lever. Inside lever is always free for
immediate egress. Requires doors specifically
designed for two-point latch system.
LM9292EL
LM9292EU
Electrically locking/unlocking outside lever,
Outside cylinder
Outside lever continuously locked (EL)
or unlocked (EU) by 12 or 24V DC. Latchbolt
retracted by key outside or lever inside. EL is fail
safe (power failure allows outside lever to retract
latchbolt); EU is fail secure (power failure locks
outside lever). Inside lever always free for
immediate egress.
LM9295EL
LM9295EU
Electrically locking/unlocking both levers,
Inside and outside cylinder
Inside and outside lever continuously locked
(EL) or unlocked (EU) by 12 or 24V DC. Latchbolt
retracted by key inside or outside. EL is fail safe
(power failure allows either lever to retract
latchbolt); EU is fail secure (power failure locks
both levers).
All electrified locks feature automatic detection and operation with 12 or 24V DC, and a case-mounted switch that allows customer selection
of EL (fail safe) or EU (fail secure) operation. Please specify lock function as EL or EU for default switch position. Locks also come standard
with Allegion Connect molex connector with 3" lead. Allegion Connect is a molex connector system that allows rapid installation of lock when
used with Allegion connect harnesses (see last page of this section of pricebook) and Allegion connect Hinges (see Ives pricebook). For more
information speak to your sales representative. The molex connector can also be cut off so that the lock can be installed with traditional splicing.
Request to Exit (RX) is not an available option for the LM9200 series.
MULITIPOINT
202
Price Book 6
Effective July 9, 2018
LM9200-6
Standard Lever Collection* A, B or C Rose Trim
LM9200 • Complete Locks
Cast or Forged Lever Designs with Wrought Roses
01
ABC (not available
612 or 613 nish)
Wrought Rose Designs
06
18
Accent (ACC)
02
07
LAT
Asti (AST)
03
AVA (ACC lever only) MER (MER lever only)
12
LON
Merano (MER)
05
17
OME
2 1/8” (54 mm) diameter 2 9/16” (65mm) diameter 2 5/8” (66mm) diameter 2 5/8” (66mm) diameter 2 5/8” (66mm) diameter
2¹¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"4³⁄₄"
2¹³⁄₁₆"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2
⁹⁄₃₂
"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹⁵⁄₁₆"
2¹¹⁄₁₆"
2¹⁄₃₂"
4⁷⁄₈"
2
⁹⁄₁₆
"
4³⁄₄"
2"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4⁷⁄₈"
¹⁄₂"³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
Ispecify hand
Not available with C Rose
Ispecify hand Ispecify hand Ispecify hand
Note: Above images shown with A Rose. (except for ligature resistant trim)
MULITIPOINT
203
Price Book 6
Effective July 9, 2018
A, B or C Rose Trim Complete Locks • LM9200
LM9200 (A, B or C Rose Trim) - Standard Collection levers
Function Description
Lever Designs
03 06 07
12I 17
OME
03 06 07 12I 17
OME
6: 01, 02, 05, 18, LAT*, LON *
ACCI†, ASTI†, MERI†
* Not available 612, 613
† Not available 629, 630
Finishes
626 626 605 606 609
612 619
622 625 643e
613
629
630
Adjustment for
Less Bottom Latch
(LBL option code)
FOR NON FIRERATED WOOD DOORS (6'8" - 10'0 door range, specify height on order)
Keyless Functions
LM9210 Passage $2,881 $2,991 $3,003 $3,021
-116
LM9225 Exit
LM9290EL or EU Electried lock, no cylinders, outside lever locks 3,246 3,356 3,368 3,386
LM9291EL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250P Ofce/Entry 3,047 3,157 3,169 3,187
-116
LM9256P Ofce/Entry w/Automatic Unlocking 3,114 3,224 3,236 3,254
LM9270P Classroom 3,047 3,157 3,169 3,187
LM9280P Storeroom (specify handing on order)
LM9292ELP or EUP Electried lock, outside cylinder, outside lever locks 3,324 3,434 3,446 3,464
LM9293EPL or EUP
Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271 Classroom Security $3,121 $3,231 $3,243 $3,261 -116
LM9293ELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,398 3,508 3,520 3,538
FOR UL FIRERATED WOOD DOORS (6'8" - 8'0" door range, specify height on order)
Keyless Functions
LM9210F Passage $3,031 $3,141 $3,153 $3,171
-116
LM9225F Exit
LM9290FEL or EU Electried lock, no cylinders, outside lever locks 3,396 3,506 3,518 3,536
LM9291FEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250FP Ofce/Entry $3,197 $3,307 $3,319 $3,337
-116
LM9256FP Ofce/Entry w/Automatic Unlocking 3,264 3,374 3,386 3,404
LM9270FP Classroom 3,197 3,307 3,319 3,337
LM9280FP Storeroom (specify handing on order)
LM9292FELP or EUP Electried lock, outside cylinder, outside lever locks 3,474 3,584 3,596 3,614
LM9293FELP or EUP
Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271FP Classroom Security $3,271 $3,381 $3,393 $3,411 -116
LM9295FEPL or EUP Electried lock, inside and outside cylinders, both levers lock 3,548 3,658 3,670 3,688
FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order)
Keyless Functions
LM9210M Passage $2,881 $2,991 $3,003 $3,021
-116
LM9225M Exit
LM9290MEL or EU Electried lock, no cylinders, outside lever locks 3,246 3,356 3,368 3,386
LM9291MEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250MP Ofce/Entry $3,047 $3,157 $3,169 $3,187
-116
LM9256MP Ofce/Entry w/Automatic Unlocking 3,114 3,224 3,236 3,254
LM9270MP Classroom 3,047 3,157 3,169 3,187
LM9280MP Storeroom (specify handing on order)
LM9292MELP or
EUP Electried lock, outside cylinder, outside lever locks 3,324 3,434 3,446 3,464
LM9293MELP or EUP
Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271MP Classroom Security $3,121 $3,231 $3,243 $3,261
-116
LM9294MELP or EUP
Electried lock, inside and outside cylinders, outside lever locks 3,398 3,508 3,520 3,538
LM9295MELP or EUP
Electried lock, inside and outside cylinders, both levers lock
LM9200-7
MULITIPOINT
204
Price Book 6
Effective July 9, 2018
LM9200-8
Standard Lever Collection* Escutcheon Trim
LM9200 • Complete Locks
Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons
01
06
18
Accent (ACC)
02
07
LAT
Asti (AST)
03
12
LON
Merano (MER)
05
17
OME
2¹¹⁄₁₆"
2¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2¹¹⁄₁₆"
2¹⁄₃₂"
2¹⁄₃₂"
4⁷⁄₈"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4³⁄₄"
2⁹⁄₁₆"
4⁷⁄₈"
¹⁄₂"
³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹⁵⁄₁₆"
2¹³⁄₁₆"
1¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"
4³⁄₄"
2¹³⁄₁₆"
2"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2⁹⁄₃₂"
2⁹⁄₃₂"
2¹¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"4³⁄₄"
2¹³⁄₁₆"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2
⁹⁄₃₂
"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"2"
2⁷⁄₈"
4⁵⁄₈"2³⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
max.
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹⁵⁄₁₆"
2¹¹⁄₁₆"
2¹⁄₃₂"
4⁷⁄₈"
2⁹⁄₁₆"
4³⁄₄
"
2"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4⁷⁄₈"
¹⁄₂"³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
L N
Cast/Forged (L) or Wrought (N)
Dimensions:
7 15/16” x 1 3/4” x 7/16”
(202mm x 44mm x 11mm)
Dimensions:
7 7/8” x 2 1/2” x 7/16”
(200mm x 64mm x 11mm)
Note: Above images shown with L Escutcheon.
Ispecify hand
Ispecify hand Ispecify hand Ispecify hand
MULITIPOINT
205
Price Book 6
Effective July 9, 2018
Complete Locks • LM9200
LM9200-9
LM9200 (L or N Escutcheon) - Standard Collection levers
Function Description
Lever Designs
03 06
07
12I 17
OME
03 06 07 12I 17
OME
6: 01, 02, 05, 18, LAT*, LON *
ACCI†, ASTI†, MERI†
* Not Available 612, 613
† Not available 629, 630
Finishes
626 605 606 609
612 619
622 625 643e
613
629
630
Adjustment for
Less Bottom Latch
(LBL option code)
FOR NON FIRERATED WOOD DOORS (6'8" to 10'0" door range; specify height on order)
Keyless Functions
LM9210 Passage $3,018 $3,030 $3,048
-116LM9290EL or EU Electried lock, no cylinders, outside lever locks 3,383 3,395 3,413
LM9291EL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250P Ofce/Entry $3,184 $3,196 $3,214
-116
LM9256P Ofce/Entry w/Automatic Unlocking 3,251 3,263 3,281
LM9270P Classroom 3,184 3,196 3,214
LM9280P Storeroom
LM9292ELP or EUP Electried lock, outside cylinder, outside lever locks 3,461 3,473 3,491
LM9293ELP or EUP Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271P Classroom Security $3,258 $3,270 $3,288 -116
LM9295ELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,535 3,547 3,565
FOR UL FIRERATED WOOD DOORS (6'8" - 8'0" door range; specify height on order)
Keyless Functions
LM9210F Passage $3,168 $3,180 $3,198
-116LM9290FEL or EU Electried lock, no cylinders, outside lever locks 3,533 3,545 3,563
LM9291FEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250FP Ofce/Entry $3,334 $3,346 $3,364
-116
LM9256FP Ofce/Entry w/Automatic Unlocking 3,401 3,413 3,431
LM9270FP Classroom 3,334 3,346 3,364
LM9280FP Storeroom
LM9292FELP or EUP Electried lock, outside cylinder, outside lever locks 3,611 3,623 3,641
LM9293FELP or EUP Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271FP Classroom Security $3,408 $3,420 $3,438 -116
LM9295FELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,685 3,697 3,715
FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order)
Keyless Functions
LM9210M Passage $3,018 $3,030 $3,048
-116LM9290MEL or EU Electried lock, no cylinders, outside lever locks 3,383 3,395 3,413
LM9291MEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250MP Ofce/Entry $3,184 $3,196 $3,214
-116
LM9256MP Ofce/Entry w/Automatic Unlocking 3,251 3,263 3,281
LM9270MP Classroom 3,184 3,196 3,214
LM9280MP Storeroom
LM9292MELP or EUP
Electried lock, outside cylinder, outside lever locks 3,461 3,473 3,491
LM9293MELP or EUP
Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271MP Classroom Security $3,258 $3,270 $3,288
-116
LM9294MELP or EUP
Electried lock, inside and outside cylinders, outside lever locks 3,535 3,547 3,565
LM9295MELP or EUP
Electried lock, inside and outside cylinders, both levers lock
MULITIPOINT
206
Price Book 6
Effective July 9, 2018
M Lever Collection* A, B or C Rose Trim
LM9200 • Complete Locks
LM9200-10
Cast or Forged Lever Designs with Wrought Roses
Wrought Rose Designs
M51
4.5"
2.4"
3.2"
4.5"
2.4"
3.2"
M54
M57
M63
M83
ME1
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
2.125”
5.5”
3.0”
0.4”
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
2.125”
5.5”
3.0”
0.4”
M52
4.5"
2.2"
3"
4.5"
2.2"
3"
M55
M61
M81
M84
ME2
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
2.125”
5.2”
2.8”
0.4”
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
2.125”
5.2”
2.8”
0.4”
M53
3.2”
2.6”
4.35”
3.2”
2.6”
4.35”
M56
M62
M82
M85
ME3
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
2.125”
5.1”
3.2”
0.4”
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
2.125”
5.1”
3.2”
0.4”
Ispecify hand Ispecify hand
Ispecify hand
Ispecify hand
A B C (not available 612 or 613 nish) Note: Above images shown
with A Rose.
MULITIPOINT
207
Price Book 6
Effective July 9, 2018
Complete Locks • LM9200
LM9200-11
LM9200 (A, B or C Rose Trim) - M Collection levers
Function Description
Lever Designs
Standard Lead-time: M51, M52, M81
6: M53, M54, M55, M56, M57†, M61I, M62I†, M63I,
M82, M83, M84, M85, ME1I, ME2I, ME3
† Available 629 and 630 only
Finishes
605 606 609 619 622 625 626
629 630 643e
Adjustment for
Less Bottom Latch
(LBL option code)
FOR NON FIRERATED WOOD DOORS (6'8" to 10'0" door range; specify height on order)
Keyless Functions
LM9210 Passage $3,021
-116
LM9225 Exit
LM9290EL or EU Electried lock, no cylinders, outside lever locks 3,386
LM9291EL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250P Ofce/Entry $3,187
-116
LM9256P Ofce/Entry w/Automatic Unlocking 3,254
LM9270P Classroom 3,187
LM9280P Storeroom
LM9292ELP or EUP Electried lock, outside cylinder, outside lever locks 3,464
LM9293ELP or EUP Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271P Classroom Security $3,261 -116
LM9295ELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,538
FOR UL FIRERATED WOOD DOORS (6'8" to 8'0" door range; specify height on order)
Keyless Functions
LM9210F Passage $3,171
-116
LM9225F Exit
LM9290FEL or EU Electried lock, no cylinders, outside lever locks 3,536
LM9291FEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250FP Ofce/Entry $3,337
-116
LM9256FP Ofce/Entry w/Automatic Unlocking 3,404
LM9270FP Classroom 3,337
LM9280FP Storeroom
LM9292FELP or EUP Electried lock, outside cylinder, outside lever locks 3,614
LM9293FELP or EUP Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271FP Classroom Security $3,411 -116
LM9295FELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,688
FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order)
Keyless Functions
LM9210M Passage $3,021
-116
LM9225M Exit
LM9290MEL or EU Electried lock, no cylinders, outside lever locks 3,386
LM9291MEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250MP Ofce/Entry $3,187
-116
LM9256MP Ofce/Entry w/Automatic Unlocking 3,254
LM9270MP Classroom 3,187
LM9280MP Storeroom
LM9292MELP or EUP
Electried lock, outside cylinder, outside lever locks 3,464
LM9293MELP or EUP
Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271MP Classroom Security $3,261
-116
LM9294MELP or EUP
Electried lock, inside and outside cylinders, outside lever locks 3,538
LM9295MELP or EUP
Electried lock, inside and outside cylinders, both levers lock
MULITIPOINT
208
Price Book 6
Effective July 9, 2018
LM9200 • Complete Locks M Lever Collection Escutcheon Trim
LM9200-12
Cast or Forged Lever Designs with Cast, Forged, or Wrought Escutcheons
L N
Cast/Forged (L) or Wrought (N)
Dimensions:
7 15/16" x 1 3/4" x 7/16"
(202mm x 44mm x 11mm)
Dimensions:
7 7/8" x 2 1/2" x 7/16"
(200mm x 64mm x 11mm)
Note: Above images shown with L escutcheon.
M51
4.5”
3.2”
2.4”
4.5"
2.4"
3.2"
M54
M57
M63
M83
ME1
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
M52
4.5"
2.2"
3"
M55
M61
M81
M84
ME2
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
M53
3.2”
2.6”
4.35”
M56
M62
M82
M85
ME3
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
4.5”
3”
2.2”
3.2”
2.55”
4.35”
4.35”
2.3”
2.75”
2.125”
2.1”
4.5”
2.9”
4.5”
3.15”
2”
2.125”
4.6”
2.85”
0.4”
5”
3”
0.4”
5”
3.3”
0.3”
4.8”
0.4”
2.9”
2.1”
2.2”
4.8”
2.85”
0.4”
4.5”
3.2”
2”
4.5”
2.6”
1.9”
4.3”
3”
2.1”
2.4” 4.5”
3”
2”
Ispecify hand Ispecify hand
Ispecify hand
Ispecify hand
5.4”
3.0”
0.4”
5.2”
2.9”
0.5”
5.0”
3.2”
0.4”
5.4”
3.0”
0.4”
5.2”
2.9”
0.5”
5.0”
3.2”
0.4”
MULITIPOINT
209
Price Book 6
Effective July 9, 2018
Complete Locks • LM9200
LM9200-13
LM9200 (L or N Escutcheon) - M Collection levers
Function Description
Lever Designs
Standard Lead-time: M51, M52, M81
6: M53, M54, M55, M56, M57†, M61I, M62I†, M63I,
M82, M83, M84, M85, ME1I, ME2I, ME3
† Available 629 and 630 only
Finishes
605 606 609 619 622 625 626
629 630 643e
Adjustment for
Less Bottom Latch
(LBL option code)
FOR NON FIRERATED WOOD DOORS (6'8" to 10'0" door range; specify height on order)
Keyless Functions
LM9210 Passage $3,048
-116LM9290EL or EU Electried lock, no cylinders, outside lever locks 3,413
LM9291EL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250P Ofce/Entry $3,214
-116
LM9256P Ofce/Entry w/Automatic Unlocking 3,281
LM9270P Classroom 3,214
LM9280P Storeroom
LM9292ELP or EUP Electried lock, outside cylinder, outside lever locks 3,491
LM9293ELP or EUP Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271P Classroom Security $3,288 -116
LM9295ELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,565
FOR UL FIRERATED WOOD DOORS (6'8" to 8'0" door range; specify height on order)
Keyless Functions
LM9210F Passage $3,198
-116LM9290FEL or EU Electried lock, no cylinders, outside lever locks 3,563
LM9291FEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250FP Ofce/Entry $3364
-116
LM9256FP Ofce/Entry w/Automatic Unlocking
LM9270FP Classroom 3,431
LM9280FP Storeroom 3,364
LM9292FELP or EUP Electried lock, outside cylinder, outside lever locks 3,641
LM9293FELP or EUP Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271FP Classroom Security $3,438 -116
LM9295FELP or EUP Electried lock, inside and outside cylinders, both levers lock 3,715
FOR UL FIRERATED HOLLOW METAL DOORS (6'8" to 8'0" door range; specify height on order)
Keyless Functions
LM9210M Passage $3,048
-116
LM9290MEL or EU Electried lock, no cylinders, outside lever locks 3,413
LM9291MEL or EU Electried lock, no cylinders, both levers locks
Keyed Single Cylinder Functions
LM9250MP Ofce/Entry $3,214
-116
LM9256MP Ofce/Entry w/Automatic Unlocking 3,281
LM9270MP Classroom 3,214
LM9280MP Storeroom
LM9292MELP or EUP
Electried lock, outside cylinder, outside lever locks 3,491
LM9293MELP or EUP
Electried lock, outside cylinder, both levers lock
Keyed Double Cylinder Functions
LM9271MP Classroom Security $3,288
-116
LM9294MELP or EUP
Electried lock, inside and outside cylinders, outside lever locks 3,565
LM9295MELP or EUP
Electried lock, inside and outside cylinders, both levers lock
MULITIPOINT
210
Price Book 6
Effective July 9, 2018
Cylinder Options
LM9200 • Options
LM9200-14
Cylinder Adjustments
Specify Description Lock Price Adjustment
(per cylinder)
Concealed Cylinder (L Escutcheon only)
C Sufx Concealed cylinder for L escutcheon $25
Full Size Interchangeable Core (FSIC)
R Sufx Full size core (furnished 1-bitted w/ two 6-pin keys unless otherwise specied) $71.00
J Sufx Less full size core N/C
Full Size Construction Core
T Sufx Full size construction core (assessed handing charge 50-231 per core) $71.00
Small Format Interchangeable Core (SFIC) (Not available with Hotel Functions L9485 or L9486)
GD Sufx Everest patented core (specify key symbol; see Terms & Conditions for more details) $82.00
BD Sufx Less small format core N/C
Small Format Construction Core & Disposable Core
HD Sufx Small format construction core (assessed handing charge 50-231 per core) $43.00
BDC Sufx Small format disposable core N/C
Construction Core Handling Charge
50-231 Handing charge for construction core (assessed per core, non-refundable) $10.10
Notes Control keys are not furnished with locks and must be purchased separately. See Keys & Keying.
Interchangeable cores are not available with concealed cylinders.
Ordering instructions: Add sufx to lock function. Ex: LM9250J (LM9250 function less full size core)
Primus / Primus XP - available through specic channels based on security levels. See Terms & Conditions for details.
Specify Description Lock Price Adjustment
Full-Face Primus Cylinders
L Sufx Order lock less cylinder; order Primus cylinder 20-787 or 20-793 separately -$83 per cylinder
20-787 Full-face Primus cylinder w/ compression ring & spring (for use with rose trim) 158.00
20-793 Full-face Primus cylinder only (for use with escutcheon trim) 149.00
Concealed Primus Cylinders
W Sufx Order lock less concealed cylinder; order Primus cylinder 20-589 separately $26.00
20-589 Concealed Primus cylinder (for use with L escutcheon w/ concealed cylinder only) 199.00
Full-Size Interchangeable Primus Core
J Sufx Order lock less full size core; order full-size Primus core 20-740 separately N/C for J Sufx
20-740 Full-size interchangable Primus core $148.00
Notes Primus not available for Faculty Restroom function (L9485, L9486)
Ordering instructions: Add sufx to lock function, order Primus cylinder separately.
Ex: LM9250W (LM9250 function less concealed cylinder) order 20-589 on separate line.
MULITIPOINT
211
Price Book 6
Effective July 9, 2018
Options • LM9200
Locks Less Components
LM9200-15
Locks Less Components
Description Specify Lock Price Adjustment
Less each knob or lever LLL for knob/lever design
Example: LM9250P LLL/03A x 03A -$26.70
Less each rose or escutcheon LLL for rose/escutcheon design
Example: LM9250P 03A x 03A/LLL -26.70
Less complete trim one side* LLL for complete trim outside
Example: LM9250P LLL x 03A -53.40
Less full face cylinder (rose trim) L sufx
Example: LM9250L 03A
-83.00
per cylinder
Less full face cylinder L sufx
Example: LM9250L 03L
-72.00
per cylinder
Less concealed cylinder
(L escutcheon only)
W sufx
Example: LM9250W 03L
-72.00
per cylinder
Non Standard Door Thickness
Specify Description Lock Price
Adjustment
Keyless Functions
thickness &
how applied (xx)
For > 1 3/4” - 2 1/2” thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) N/C
For > 2 1/2” - 4” thick doors, specify (xx) Extended Inside (EI), Outside (EO), Equally (EE) or Differently (ED) $99.50
Single Cylinder Functions
thickness &
how applied (xx)
For > 1 3/4” - 2 1/2” thick doors N/C
For > 2 1/2” - 4” thick doors - specify (xx) Extended Inside (EI) $99.50
For > 2 1/2" - 4" thick doors - specify (xx) Extended Outside (EO), Equally (EE), or Differently (ED) 486.00
Double Cylinder Functions
thickness &
how applied (xx)
For > 1 3/4" - 2 1/2" thick doors N/C
For > 2 1/2" - 4" thick doors - specify (xx) Extended Inside (EI) or Extended Outside (EO) $486.00
For > 2 1/2" - 4" thick doors - specify (xx) Extended Equally (EE) or Extended Differently (ED) 869.00
Notes Price keyed locks less cylinders (L or W sufx) same as keyless locks
Locks furnished Extended Equally unless otherwise specied
Locks w/ N Esctucheon only available for 1 3/4" - 2 3/8" thick doors
Locks with small format interchangable cores (BD, BDC, GD, HD sufx) only available for 1 3/8" - 2 1/4" thick doors
Ordering instructions: Include thickness and how extended in order. EX - LM9250P 03A 626 2" EE (LM9250P function, 03A trim, 626, for 2" door extended equally).
MULITIPOINT
212
Price Book 6
Effective July 9, 2018
LM9200-16
Indicators (for Sectional (rose) or N Escutcheon Trim),
Tactile Warning, ADA Thumbturn, Lever Trak
LM9200 • Options
Tactile Warning
Specify Description Lock Price Adjustment
'8' lever prex Tactile warning applied to outside lever; available on 01, 02, 03, 05, 06, 07, 12, 17,
18, M51, M52, M81 lever designs
$46.40
Ordering instructions: Preface lever design code with 8. EX - 803 for 03, 806 for 06, 851 for M51, etc.
ADA Thumbturn*
Specify Description Lock Price Adjustment
L583-363 ADA Disability thumbturn option $16.30
Ordering instructions: include in order under “Additional Details”.
Folger Adam Co® Lever Trak™
Specify Description Lock Price Adjustment
503 Lever Design Modied inside and outside 03 lever for Folger Adam Co. ® Lever Trak™.
Available rose trim only, not available 629 or 630 nish.
$102.00
Ordering instructions: Specify lever design as 503.
Indicators (for Sectional (rose) or N Escutcheon Trim)
Specify Description Lock Price Adjustment
inside indicators available for: LM9250, LM9256, LM9271
L283-711 LOCKED/UNLOCKED indicator for inside of door $105.00
L283-712 VACANT/OCCUPIED indicator for inside of door 105.00
L283-713 DO NOT DISTURB indicator for inside of door 105.00
L283-714 symbols only indicator for inside of door 105.00
outside indicators available for: LM9250, LM9256, LM9270, LM9271
L283-721 LOCKED/UNLOCKED indicator for outside of door 105.00
L283-722 VACANT/OCCUPIED indicator for outside of door 105.00
L283-723 DO NOT DISTURB indicator for outside of door 105.00
L283-724 symbols only indicator for outside of door 105.00
Notes: 1) Indicators available in all nishes except 612 and 613
2) Sectional indicators available for cylinder functions only until May 2015
3) Indicator option available either inside or outside of door only.
4) Cylinder and sectional indicators require additional door preparation.
Ordering instructions: add part number under “Additional Details” section of order. EX: LM9250P 06N 626 L283-711 adds indicator to the inside (thumbturn side) of
lock
Sectional Indicator N Escutcheon Indicator Available Messages
LOCKED/OCCUPIED/DO NOT DISTURB/ lock symbol is white text on red background
UNLOCKED/VACANT/unlocked symbol is black text on white background
DO NOT DISTURB
VACANT
OCCUPIED
UNLOCKED
LOCKED
Antimicrobial Coating
Specify Description Lock Price Adjustment
626AM or 630AM Rose Trim: Adds silver-ion based anti-microbial coating to inside lever, bushing, rose & thumbturn and outside
lever, bushing, rose, cylinder ring, and cylinder faceplate $49.40
626AM or 630AM Escutcheon Trim: Adds silver-ion based anti-microbial coating to inside lever, bushing, escutcheon & thumbturn
and outside lever, bushing, escutcheon, and cylinder face plate
Ordering instructions: Specify nish as either 626AM or 630AM.
MULITIPOINT
213
Price Book 6
Effective July 9, 2018
LM9200-17
Parts • LM9200
Levers & Roses, Escutcheons
Levers
Style Lever Design 605 606 609 612 613 619 622 625 626 629 630 643e
Standard 016, 026, 03*, 056, 06, 07, 12I, 17, 18, OME6••••••••••••
LAT6, LON6••• •••••••
ACCI, ASTI, MERI, STAI••• •••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, M856I, ME16I, ME26I, ME36••• •••••••
M576I, M626I • •
6Extended Factory Lead Time Ispecify handing
Part
Number Description Standard Levers Decorative Levers
09-401 Outside lever, retaining clip, insertion tool $176 $191
09-402 Inside lever+bushing, mounting plate, screw pack, spanner wrench
*Available modied for Folger Adam Co.® Lever Track™. Specify 503 design and add $51.00. Not available in 629 or 630 nish.
Ordering instructions: Specify part number, lever style + rose, nish. Ex: 09-401 03A 626.
Roses
Style Rose Design 605 606 609 612 613 619 622 625 626 629 630 643e
Standard A, B, C ••••••••••• •
Decorative MER, AVA ••• •••• •
Part
Number Description Standard and Decorative
09-403 Inside Rose (includes mounting plate and screws)
$98.70
09-404 Outside Rose+Bushing
09-508 Blank Outside Rose (not available MER or AVA)
Ordering instructions: Specify part number, lever design + rose, nish. Ex: 09-404 03A 626. Lever design must be specied for proper bushing.
Escutcheons
Available nishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description L Escutcheon N Escutcheon
Outside Escutcheon & Bushing
09-636 Blank x lever
$176 $176
09-637 Emergency turn x lever
09-638 Concealed cylinder x lever
09-639 Full face cylinder x lever
09-640* Concealed cylinder x occupancy indicator x lever 201
09-641* Full face cylinder x occupancy indicator x lever
Inside Escutcheon
09-632 Blank x lever
176
176
09-633** Thumbturn x lever
09-634** Thumbturn x blank
09-635 Full face cylinder x lever 176
L583-187 Concealed cylinder x lever
* Available with 'occupied" indicator. Specify with L583-375 and add $17.40
** Specify door thickness: 1 3/8" or 1 3/4"
Ordering instructions: Specify part number, lever + escutcheon style, nish. Ex: 09-639 03L 626 (full face cylinder, 03 lever, L escutcheon, 626 nish).
MULITIPOINT
214
Price Book 6
Effective July 9, 2018
Outside Lever Assemblies
LM9200 • Parts
LM9200-18
Outside Lever/and Rose/Escutcheon Assemblies
Style Lever Design 605 606 609 612 613 619 622 625 626 629 630 643e
Standard 016, 026, 03, 056, 06, 07, 12I, 17, 18, OME6••••••••••• •
LAT6, LON6••• •••••• •
ACCI, ASTI, MERI, STAI••• •••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, M856I, ME16I, ME26I, ME36••• •••••• •
M576I, M626I • •
6Extended Factory Lead Time Ispecify handing
Part
Number Description Standard Levers Decorative Levers
With A, B or C rose
09-506 Outside Lever assembly $195 $210
With Avanti or Merano Rose
09-655 Outside lever assembly for AST w/Avanti rose or MER w/Merano rose
only 195 N/A
With L or N Escutcheon
09-550 Blank
259 274
09-551 Emergency turn
09-552 Concealed cylinder (L escutcheon only)
09-553 Full face cylinder
09-554* concealed cylinder w/ indicator (L escutcheon only)
09-555* Full face cylinder w/ indicator (L escutcheon only)
* Available with “occupied” indicator. Specify with l583-375 and add $16.60.
Ordering instructions: Specify part number, lever style, rose/escutcheon, nish. Ex: 09-506 M53A 626 (outside assembly, M53 lever, A rose, 626 nish).
Armor Fronts, LM9200 Series
Part Number Description Price Each
24647307 605 LM9200 Armor Front - 605 (bright brass) nish
$69.20
24647315 606 LM9200 Armor Front - 606 (satin brass) nish
24647323 609 LM9200 Armor Front - 609 (antique bronze) nish
24647356 619 LM9200 Armor Front - 619 (satin nickel) nish
24647364 625 LM9200 Armor Front - 625 (bright chrome) nish
24647372 626 LM9200 Armor Font - 626 (satin chrome) nish
24647380 629 LM9200 Armor Front - 629 (bright stainless) nish
24647398 316 LM9200 Armor Front - 643e (aged bronze) nish
47244699 630 LM9200 Armor Font - 630 (satin stainless steel) nish
K110-020 xx Armor front screws; contains (2) K510-210, #8-32 x 1/4" MS PFH; specify nish as xx 0.88
MULITIPOINT
215
Price Book 6
Effective July 9, 2018
Buttons, Thumbturns, Coin Turns, Cylinder Turns, Occupancy Indicators Parts • LM9200
LM9200-19
K510-330 09-509 09-509
w/ ADA Thumbturn (L583-363) L283-124 09-900
Emergency Button, Thumbturns, Coin Turns & Cylinder Turns
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
Emergency Button & Emergency Turn Tool
K510-330 Emergency Button, L9040 and L9440 $14.80
L583-233 Emergency turn tool for L9040 and L9440. Specify nish as 458. 18.50
Thumbturns
09-509 027 Thumbturn for rose trim, 1 3/8"- 1 7/8" door range, extended equally
69.00
09-509 033 Thumbturn for rose trim, >1 7/8"- 2 3/8" door range, extended equally
09-509 040 Thumbturn for rose trim, >2 3/8"- 2 7/8" door range, extended equally
09-509 047 Thumbturn for rose trim, >2 7/8"- 3 5/8" door range, extended equally
L583-363
Sufx ADA thumbturn upgrade, specify thumbturn p/n + L583-363 Add $16.30 to 09-509 price
Coin Turns
L283-124 19 Coin turn, L9044 and L9444, 1 3/8" - 1 1/2" door range, extended equally (EE)
119.00
L283-124 23 Coin turn, L9044 and L9444, 1 5/8" - 1 7/8" door range, extended equally (EE)
L283-124 25 Coin turn, L9044 and L9444, >1 7/8" - 2 1/8" door range, extended equally (EE)
L283-124 31 Coin turn, L9044 and L9444, >2 1/8" - 2 5/8" door range, extended equally (EE)
L283-124 37 Coin turn, L9044 and L9444, >2 5/8" - 2 7/8" door range, extended equally (EE)
L283-124 43 Coin turn, L9044 and L9444, >2 7/8" - 3 3/8" door range, extended equally (EE)
L283-124 48 Coin turn, L9044 and L9444, >3 3/8" - 3 5/8" door range, extended equally (EE)
L283-056 19 Coin turn w/ torx screws, L9044 and L9444, 1 3/8" - 1 1/2" door range, EE
130.00
L283-056 23 Coin turn w/ torx screws, L9044 and L9444, 1 5/8" - 1 7/8" door range, EE
L283-056 25 Coin turn w/ torx screws, L9044 and L9444, >1 7/8" - 2 1/8" door range, EE
L283-056 31 Coin turn w/ torx screws, L9044 and L9444, >2 1/8" - 2 5/8" door range, EE
L283-056 37 Coin turn w/ torx screws, L9044 and L9444, >2 5/8" - 2 7/8" door range, EE
L283-056 43 Coin turn w/ torx screws, L9044 and L9444, >2 7/8" - 3 3/8" door range, EE
L283-056 48 Coin turn w/ torx screws, L9044 and L9444, >3 3/8" - 3 5/8" door range, EE
EE = Extended Equally
Note: Coin turns not available in 612 or 613 finish
Cylinder Turns I,*
09-487 xx Cylinder coin turn, specify dimension (xx) as 1 1/8", 1 1/4” or 1 3/8" (replaces XL12-196) $120.00
09-900 xx Cylinder turn, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 117.00
09-900 xx Cylinder turn, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 179.00
09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/8", 1 1/4" or 1 3/8" 127.00
09-904 xx Cylinder turn w/ compression ring, specify dimension (xx) as 1 1/2", 1 5/8" or 1 3/4" 186.00
09-905 Cylinder turn w/ compression ring and 1/8" blocking ring for 1 3/4" doors 138.00
09-907 Cylinder turn w/ compression ring and 1/4" blocking ring for 1 3/8" doors
ISpecify door hand for cylinder turns if used with L463 or L9463.
*Cylinder turns not available in 612, 613, 629 or 630 nish
Ordering instructions: Specify part number, dimension if required, nish, handing. Ex: 09-900 112, 626, RH.
MULITIPOINT
216
Price Book 6
Effective July 9, 2018
Thru-Bolts, Mounting Posts, Springs & Spindles
LM9200 • Parts
LM9200-20
Escutcheon Thru-Bolts
Available Finishes 605 606 609 612 613 619 622 625 626 629 630 643e
••••••••••••
Part
Number Description Price Each
L Escutcheon Thru-bolts: two required per lock
L583-119 L escutcheon thru bolts for 1 3/8" door thickness
$6.00
L583-120 L escutcheon thru bolts for 1 3/4" door thickness
L583-121 L escutcheon thru bolts for 2" door thickness
L583-122 L escutcheon thru bolts for 2 1/4" door thickness
L583-123 L escutcheon thru bolts for 2 1/2" door thickness 7.10
L583-287 L escutcheon mounting screws for L9175 half-dummy function 5.30
N Escutcheon Thru-Bolts: two required per lock
K510-389 N escutcheon thru bolts for 1 3/4" door thickness 7.10
K510-390 N escutcheon thru bolts for 2" to 2 1/4" door thickness
L583-133 N Escutcheon mounting screws for L0170 single dummy function 0.90
Ordering instructions: Specify part number and nish. Ex: L583-120 626.
Mounting Posts (Ferrules)
Part
Number Description Price Each
L Mounting Posts (Ferrules): two required per lock
L583-211 Mounting post for 1 3/8" door thickness
$11.40
L583-212 Mounting post for 1 3/4" door thickness
L583-213 Mounting post for 2" door thickness
L583-214 Mounting post for 2 1/4" door thickness
L583-215 Mounting post for 2 1/2" door thickness
L583-216 Mounting post for 2 3/4" door thickness
L583-217 Mounting post for 3" door thickness
L583-218 Mounting post for 3 1/4" door thickness 29.10
L583-219 Mounting post for 3 1/2" door thickness
LV Mounting Posts (Ferrules): two required per lock
L583-497 LV mounting post for 1 3/4" door thickness
$23.90
L583-498 LV mounting post for 2" door thickness
L583-499 LV mounting post for 2 1/4" door thickness
L583-500 LV mounting post for 2 1/2" door thickness
L583-501 LV mounting post for 2 3/4" door thickness
L583-502 LV mounting post for 3" door thickness
L583-503 LV mounting post for 3 1/4" door thickness 31.50
L583-504 LV mounting post for 3 1/2" door thickness
Ordering instructions: Specify part number.
Spindle & Springs
Part
Number Description Price Each
Spindle & Spring Kits (qty two each)
L283-198 Spindles and springs for 1-3/8" - 1 7/8" doors $15.50
L283-199 Spindles and springs for 2" - 3 1/2" doors 18.30
Spindles & Springs (qty one each)
L283-060 Spindle and spring for 1 3/8" - 1 7/8" doors (two required per lock) $7.80
L283-061 Spindle and spring for 2" - 3 1/2" doors (two required per lock) 9.60
L283-064 Spindle and spring, L0172 full dummy (one required per lock) 13.70
L283-065 Spindle and spring, L0170 half dummy (one required per lock) 7.30
Ordering instructions: Specify part number.
MULITIPOINT
217
Price Book 6
Effective July 9, 2018
Lock Cases, Latch Kits, Strikes, Cables & Fire-Rated Components Parts • LM9200
LM9200-21
Lock Cases
Part Number Lock Function and Description Price Each
24759599 LM9210, Passage $1,495.00
LM9225, Exit
24759623
LM9250, Ofce/Entry
1,661.00
LM9270, Classroom
LM9271, Classroom Security
LM9280, Storeroom
24616914 LM9256, Ofce/Entry w/ auto unlock 1,729.00
24759656 LM9290/LM9292/LM9294 Electried 1,938.00
24759664 LM9291/LM9293/LM9295 Electried 1,938.00
Latch Kits
Part Number Lock Function and Description Price Each
24721714 Top Latch Kit $166.00
24721722 Bottom Latch Kit 133.00
Cables
Part Number Lock Function and Description Price Each
24665002 Top strike - includes strike, strike shims and screw pack (VD 23945223) $41.00
24664997 Bottom strike - includes strike, anchors and screw pack (VD 24664997) 23.20
24647265 LM9200 bottom cable 49.80
24691750 LM9200 top cable, 6'8-7'0" door opening 49.80
24691768 LM9200 top cable, 7'1"-8'0" door opening 49.80
24691776 LM9200 top cable, 8'1"-9'0" door opening 55.40
24691784 LM9200 top cable, 9'1"-10'0" door opening 55.40
Fire-rated components
Part Number Lock Function and Description Price Each
24750408 Fire barrier $142.00
24756504 Intumescent for re barrier 66.20
24792558 Intumescent for armor front 66.20
48968887 Fire pin kit - includes re pin, re pin sleeve, re pin strike, and screws 149.00
MULITIPOINT
218
Price Book 6
Effective July 9, 2018
LM9200-22
Latches and Strikes
LM9200 • Parts
Miscellaneous Parts
Part Number Lock Function and Description Price Each
24616922 Link, top, LM9200 $16.80
24302960 Electried locking catch, LM9200 14.70
24511081 Spool assembly, LM9200 70.40
24624892 Hub spring, LM9200 12.30
24625642 Retractor, LM9200 14.30
24683542 Tilting link compression spring, LM9200 1.40
24865057 Faceplate tab, LM9200 1 1/4" 27.40
24869893 Electried link, LM9200 89.30
24869901 Electried hub, LM9200 75.50
49001704 Capacitor holder, LM9200 19.80
24616930 Link, bottom, LM9200 15.20
24625667 Bell crank cover, LM9200 70.90
24625717 Tilting link, LM9200 19.70
24641714 Turn hub spring, LM9200 15.00
24653917 Lock Case, Subassembly, LM9200 298.00
24653925 Link subassembly, LM9200 295.00
L283-055 Cylinder retainer plate and screw 17.90
L283-344 L909x/LM929x PCB assembly 204.00
L283-680 L909x/LM929x motor assembly 92.90
L583-015 Latchbolt guide 3.70
L583-748 Retractor hub (2 required per lock) 4.20
L583-020 Retractor hub spacer 4.40
L583-021 Retractor lever 3.80
L583-022 Retractor rocker 3.00
L583-023 Blocking plate 3.70
L583-024 Retractor link 7.80
L583-025 Retractor Crank 7.80
L583-029 Turn Hub 19.10
L583-045 Locking catch 19.50
L583-048 Locking link 4.40
L583-050 Link pin 1.80
L583-454 Case cover screw (7 required) 1.50
L583-485 Lock handing screw 1.70
L583-490 Cylinder retainer 7.00
L283-030 Pack of 20 truarc rings, levers 21.30
L283-031 Mounting Plate, inside lever 19.50
L283-040 Spring Cage (1 required per lever) 9.60
L283-150 Mounting Plate for inside rose trim on one side of door only 39.20
L583-066 Mounting plate screw (2 required per lock) 1.40
MULITIPOINT
219
Price Book 6
Effective July 9, 2018
Parts • LM9200
LM9200-23
Mortise Cylinders
L583-274
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
YX
L583-275
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
YX
Dim. X = .261
Y = .644
Dim. X = .261
Y = .644
L583-274
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
YX
L583-275
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
YX
Dim. X = .261
Y = .644
Dim. X = .261
Y = .644
Mortise Cylinders
Cam Description Cylinder Mechanism Complete Cylinder
Price Each
Open Restricted
L583-474
For cyl. length 1 1/8”,
1 3/8”, 1 5/8”
L583-475
For cyl. length 1 1/4”,
1 1/2”, 1 3/4”
Cylinder Only:
L & N Escutcheons
Standard 30-021 $72.00 $89.00
Primus Controlled Access 20-793 149.00
Primus XP Controlled Access 20-793-XP 149.00
Primus UL437 20-593 181.00
Primus XP UL437 20-593-XP 181.00
Cylinder With
Compression
Ring & Spring:
Rose Trim
Standard 30-001 83.00 100.00
Primus Controlled Access 20-787 158.00
Primus XP Controlled Access 20-787-XP 158.00
Primus UL437 20-587 189.00
Primus XP UL437 20-587-XP 189.00
Primus Lockout 20-717 214.00
Primus XP Lockout 20-717-XP 214.00
Primus UL437 Lockout 20-517 230.00
Primus XP UL437 Lockout 20-517-XP 230.00
MULITIPOINT
220
Price Book 6
Effective July 9, 2018
LM9200-24
Allegion Connect Harnesses
LM9200 • Parts
Allegion Connect Harnesses - Prices listed are net, discounting does not apply
Part Number Description Price Each
Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors)
CON-6 6" Wire Harness (internal p/n 106190-00) $10.50
CON-12 12" Wire Harness (internal p/n 106191-00) 14.00
CON-26 26" Wire Harness (internal p/n 106192-00) 15.80
CON-32 32" Wire Harness (internal p/n 106193-00) 16.90
CON-38 38" Wire Harness (internal p/n 106194-00) 18.50
CON-44 44" Wire Harness (internal p/n 106195-00) 18.00
CON-50 50" Wire Harness (internal p/n 106196-00) 18.50
CON-192 192" Wire Harness (internal p/n 106197-00) 44.20
Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors)
CON-6P 6" Wire Harness (internal p/n 106201-00) $13.40
CON-12P 12" Wire Harness (internal p/n 106202-00) 16.90
CON-26P 26" Wire Harness (internal p/n 106203-00) 18.50
CON-32P 32" Wire Harness (internal p/n 106204-00) 19.80
CON-38P 38" Wire Harness (internal p/n 106205-00) 20.30
CON-44P 44" Wire Harness (internal p/n 106206-00) 20.90
CON-50P 50" Wire Harness (internal p/n 106207-00) 21.50
CON-192P 192" Wire Harness (internal p/n 106208-00) 46.50
Harness with Molex Connector on one end, stripped leads on other (for connection to power supply)
CON-6W 6" extension to power supply (internal p/n 106210-00) $13.40
Service Kit
CON-KIT Connector Service Kit (internal p/n 050823-00) contains:
-100 each male & female terminals
-10 each 4-pin and 8-pin male connectors
-10 each 4-pin and 8-pin female connectors
- 1 extraction tool"
$111.00
S200-SeriesH-SeriesINTERCONNECTED
221
Price Book 6
Effective July 9, 2018
CS Series
GRADE 2 INTERCONNECT LOCK
CS210-1
S200-Series H-Series INTERCONNECTED
222
Price Book 6
Effective July 9, 2018
CS210-2
CS Series
GRADE 2 INTERCONNECT LOCK
To order Schlage products, descriptive data should be in the same sequence as shown below.
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + Cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design: Specify only if different from the outside lever design
Inside Fin: Inside lever nish: Specify only if different from the outside nish
Hand: Default handing for the CS210 is right hand (RH). Handing is eld reversible. Handing instructions are required on the following
levers due to their design: Accent, Avanti, Callington, Champagne, Flair, Manhattan, Merano and St. Annes. When specifying
handing, only one handing allowed per line item. Example: RH = right hand, LH = left hand, RR = right reverse, LR = left reverse.
Latch: Product latch: Leave blank for standard latch or specify part number if non-standard latch is required.
Strike: Product strike: Leave blank for standard strike or specify part number if non-standard strike is required.
Dr Thk: Door thickness: Enter door thickness if non-standard. Example: 138=1 3/8"
Ext: Extension: Enter for 1 3/8" doors. Example: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended
differently
Dim: Dimension: Enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Function
Cyl
Type
Outside Inside Escutcheon Dr
Thk Handing
Latch Strike
DES FIN DES FIN DES FIN DES FIN DES FIN
1 10 CS210-B60 P SAT 626 ACC 605 CAM 605 134 RH 12-339 606 10-109 605
S200-SeriesH-SeriesINTERCONNECTED
223
Price Book 6
Effective July 9, 2018
CS210-3
CS210
Introduction
Product Identification
CS 210-500 P D
Latch Suffix
D = Deadlatch
Cylinder Suffix
P = 6-Pin Cylinder(s)
L = Less 6-Pin Cylinder(s)
R = Full Size
Interchangeable Core
J = Less Full Size
Interchangeable Core
T = Full Size Construction Core
B = Less SFIC
BDC = Disposable SFIC
G = Everest 29 Patented SFIC
H = Construction Core
Z = Everest SL 7 pin Cylinder
Function
B500 = Commercial
B60 = Residential
Lock Series
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
609 (US 5) Antique Brass
619 (US 15) Satin Nickel
622 (US 19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
643e (US 11) Aged Bronze
Standard Features
Certification: ANSI/BHMA Certified A156.12-2013, Grade 2, UL listed for 3-hour fire door
With SFIC interchangable core cylinders: Grade 3 Security
Deadbolt: 1 X 2-1/4”, dual option faceplate, (square corner standard, round corner included in package),
1” housing diameter, 1” throw
Latch 1” x 2-1/4” dual option faceplate (square corner standard, round corner included in package).
1” edge bore required
Strikes: 1-1/8” X 2-3/4”, Square corner (deadbolt) and 1-5/8” X 2-1/4”,
Square corner, full lip, no box, 1 5/8" x 2 1/4" (Deadlatch)
Backset: Adjustable backset, fits 2-3/8” or 2-3/4”
Cylinders: 6-pin, solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range: 1-3/4” to 2” standard (1-3/8” available, must be specified)
Keys: Nickel silver cut keys, 6-pin, S123 section
Center to Center: Fits 4” or 5 1/2” (factory default) center to center door preps
Table of Contents
Functions CS210-4
Complete Locks CS210-5
Options CS210-8
Deadbolts/Deadlatches ...................CS210-8
Deadbolt Strikes ..........................CS210-8
Strike Combinations ......................CS210-8
Locks Less Components ...................CS210-8
Parts CS210-9
Deadbolts ................................CS210-9
Deadlatches ..............................CS210-9
Deadbolt/Deadlatch Combinations .......CS210-9
Deadbolt Strikes ..........................CS210-9
Deadlatch Strikes .........................CS210-9
Deadbolt/Deadlatch Strike
Combinations .............................CS210-9
Components .............................CS210-10
Miscellaneous Subassemblies/
Components .............................CS210-10
Screw/Screw Packs ......................CS210-10
Cylinders .................................CS210-10
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
S200-Series H-Series INTERCONNECTED
224
Price Book 6
Effective July 9, 2018
CS210-4
CS210 • Functions
ANSI/BHMA Certified A156.12-2013, Grade 2, UL Listed for 3-hour fire door.
SCHLAGE ANSI
CS210PD F95 Entrance, Single Locking
Deadbolt operated by key from
outside or by turn unit from inside.
Bolt automatically deadlocks when fully
thrown. Latch retracted by lever from
either side. Turning inside lever retracts
deadbolt and latch simultaneously for
immediate exit.
S200-SeriesH-SeriesINTERCONNECTED
225
Price Book 6
Effective July 9, 2018
CS210-5
Jupiter (JUP)
Neptune (NEP)
Elan (ELA)
Latitude (LAT)
Saturn (SAT)
Jazz (JAZ)
Complete Locks • CS210
Avila (VLA)Accent (ACC)
ISpecify hand
Avanti (AVA)
ISpecify hand
Flair (FLA)
ISpecify hand
Manhattan (MNH)
ISpecify hand
Merano (MER)
ISpecify hand
St. Annes (STA)
ISpecify hand
Champagne (CHP)
ISpecify hand
Callington (CLT)
ISpecify hand
Roses
Inside/Outside Rose - Saturn
Levers: JUP, NEP, SAT
Size: 2 1/2” dia.
Outside Rose - Plymouth
Levers: ACC, AVA, VLA, BRK, BRW, CLT, CHP,
ELA, FLA, JAZ, LAT, LON, MNH, MER, STA
Size: 2 1/2” dia.
Boardwalk (BRK)
Broadway (BRW)
Longitude (LON)
S200-Series H-Series INTERCONNECTED
226
Price Book 6
Effective July 9, 2018
CS210-6
CS210 • Complete Locks
Strikes, Deadbolts
10-094
Standard 10-092 10-095 10-116
Strikes, Deadlatches
10-001 10-026
Standard 10-027
Latches
12-340 16-260
Escutcheons
Camelot (CAM) Plymouth (PLY)
S200-SeriesH-SeriesINTERCONNECTED
227
Price Book 6
Effective July 9, 2018
CS210-7
Complete Locks • CS210
Function Description Design and Finishes
Primary Cylinder Adjustments
Available Levers
Available Finishes
Keyed, Single Cylinder
IACC IAVA VLA ICLT ICHP ELA IFLA
JAZ JUP LAT IMNH IMER
NEP SAT ISTA BRK BRW LON
LD
CD
RD
TD* JD BD
BDC GD HD*
ALL
605 609 619 625 626 643e
626 605 609 619 622 625 643e LD
CD
RD
TD JD BD
BDC GD HD
CS210-B500 Entrance with Commercial Spin Ring 389 401 -62 37 -34 N/C 82 43
CS210-B60** Entrance with Residential Spin Ring N/A N/A N/A
SECONDARY
CYLINDER
ADJUSTMENT
EVEREST AND RESTRICTED KEYWAY
EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +17.00
SL Cylinder with Everest B or Everest R keyways +17.00
*Temporary cores (TD and HD options) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
* * B60 spin ring accepts the KIL and FSIC formats only
S200-Series H-Series INTERCONNECTED
228
Price Book 6
Effective July 9, 2018
CS210-8
CS210 • Options Deadbolts/Deadlatches, Deadbolt Strikes, Strike Combinations,
Locks Less Components
Deadbolts/Deadlatches
Combo Part
Number Deadbolt Deadlatch Backset - Hsg Dia. - Description Lock Adjustment
12-339 12-340 16-260 2 3/8" or 2 3/4" - 1" - Dual Option, 1" x 2 1/4", standard (square corner
standard, round corner included in the package) N/C
Deadbolt Strikes
Part Number Lip Length - Description Lock Adjustment
10-094 N/A - Square corner, 1 1/8" x 2 3/4"
N/C
10-092 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
10-095 1 1/8" - 1/4" Square corner, full lip, no box, 1 5/8" x 2 1/4"
10-116 N/A - Round corner strike, no lip, 1 1/8" X 2 3/4"
Deadlatch Strikes
Part Number Lip Length - Description Lock Adjustment
10-001 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
N/C10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4"
10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
Locks Less Components
Description Specify Lock Adjustment
Less deadbolt strike LLL for deadbolt strike
Example: CS210PD SAT 12-339 LLL/10-001 N/C
Less deadlatch strike LLL for deadlatch strike
Example: CS210PD SAT 12-339 LLL/10-094 N/C
Less both levers LLL for both Levers
Example: CS210PD LLL/SAT LLL -$11.40
Strike Combinations
Deadbolt
Strike Deadlatch Strike
Specify
Combo
Number
Add to
Lock Price
10-094 10-001 10-109
N/C
10-094 10-026 10-121
10-116 10-027 10-122
10-092 10-027 10-123
10-095 10-026 10-124
Shaded items are standard components and are
furnished with locks unless otherwise specified.
S200-SeriesH-SeriesINTERCONNECTED
229
Price Book 6
Effective July 9, 2018
CS210-9
Deadbolts
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
12-340, 12-291, 12-633 •••••••
Part Number Backset - Description Price Each
12-340 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4
Round corner, 1"x 2 1/4", included $40.80
12-291 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 40.80
12-633 5" - Square corner, 1 1/8" x 2 1/4" 90.10
Deadlatches
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
16-260, 16-228, 16-132 •••••••
Part Number Backset - Description Price Each
16-260 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4"
Round corner, 1"x 2 1/4", included $36.30
16-228 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 34.90
16-132 5" - Square corner, 1 1/8" x 2 1/4" 45.20
Deadbolt Strikes
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
10-094, 10-092, 10-095 •••••••
Part Number Lip Length - Description Price Each
10-094 N/A - Square corner, 1 1/8” x 2 3/4” $13.00
10-092 1 1/8" - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 8.40
10-095 1 1/8" - Square corner, full lip, no box, 1 5/8” x 2 1/4”
10-116 N/A - Round corner strike, no lip, 1 1/8” X 2 3/4” 14.60
37-016 Strike reinforce, use with 10-094 and 10-116 15.20
Deadlatch Strikes
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
10-001, 10-026, 10-027 •••••••
Part Number Lip Length - Description Price Each
10-001 Square corner, T-strike, box, 1 1/8” x 2 3/4” $6.90
10-026 1 1/8” - Square corner, full lip, no box, 1 5/8” x 2 1/4” 8.10
10-027 1 1/8” - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4”
Deadbolt/Deadlatch Strike Combinations
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
10-109, 10-121, 10-122, 10-123, 10-124 •••••••
Part Number Deadbolt Strike Deadlatch Strike
10-109 10-094 10-001 1 1/8" lip $19.90
10-121 10-094 10-026 21.10
10-122 10-116 10-027 22.70
10-123 10-092 10-027 16.50
10-124 10-095 10-026
Deadbolt/Deadlatch Combinations
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
12-339, 16-483, 16-484 •••••••
Part Number Backset - Description Deadbolt Deadlatch Price Each
12-339 2 3/8" or 2 3/4" - Dual Option, 1" x 2-1/4" 12-340 16-260 $75.70
16-483 2 3/8" or 2 3/4" - Square corner, 1 1/8" x 2 1/4" 12-291 16-228
16-484 5" - Square corner, 1" x 2 1/4" 12-633 16-132 135.00
Parts • CS210
Deadbolts, Deadlatches, Deadbolt/Deadlatch Combinations, Deadbolt Strikes,
Deadlatch Strikes, Deadbolt/Deadlatch Strike Combinations
S200-Series H-Series INTERCONNECTED
230
Price Book 6
Effective July 9, 2018
CS210-10
CS210 • Parts
Finished Trim Subassemblies/Components
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
S206-501, S206-516, S206-515, S206-518, S206-517, 08-029, F506-864, F206-493 06-242 •••••••
Part Number Description Price Each
S206-501 Assembly, cylinder, DB, OUTSIDE, CS200 $58.30
S206-516 Assembly, housing, cylinder, IC, THIN DOOR, CS200 228.00
S206-515 Assembly, housing, cylinder, IC, CS200 216.00
S206-518 Assembly, housing, cylinder, SFIC, THIN DOOR, CS200 146.00
S206-517 Assembly, housing, cylinder, SFIC, CS200 127.00
08-029* ** Rose SAT PLY (Snap On Only) 12.60
F506-864 Escutcheon CAM PLY 91.90
F206-493 Plate, escutcheon assembly 46.30
06-242** Kit, levers 56.80
* Rose - Lever Combination
Saturn - Saturn, Neptune, Jupiter
Plymouth - Accent, Avanti, Avila, Callington, Champagne, Elan, Flair, Jazz, Jupiter, Latitude, Manhattan, Merano, St. Annes
** The CS200 product line transitined from crimp-on roses (not removeable) to snap on roses (removable) in AUGUST 2015. The Rose - Lever
Combination needs to be considered for changing levers for locks with crimp-on roses. Snap-on roses can be identied by retention dimples at
the base of the rose.
If not compatible, an outside chassis with a crimp-on rose can be updated with the following items:
- 06-242 Kit, levers
- 08-029 Rose SAT PLY (Snap on)
- A501-945 Ring reinf rose
- F206-496 Outside Chassis Assy, Interconnect
Miscellaneous Subassemblies/Components
Part Number Description Price Each
S206-502 Interconnect assembly, mechanical $96.40
F206-494 Inside chassis assembly, interconnect 36.60
F206-496 Outside chassis assy, interconnect 34.30
A501-945 Ring reinf rose, LUN-ORB-TUL 0.52
F506-878 Driver bar 3.30
Screw/Screw Packs
Available Finishes - Specify for Listed Parts 605 609 619 622 625 626 643e
B202-578, S206-504 •••••••
Part Number Description Contents Price Each
B202-578 Latch and strike (4) C603-897 $5.10
S206-504 Chassis & trim
(2) B600-100
(2) B520-621
(2) F506-278
6.30
B502-873* Screw, reinf. strike - 0.58
* Order in multiples of 100
Cylinder Reference Table
Available Finishes - Specify for Listed Parts 606 626
22-093
Part Number Cylinder Mechanism Function Design
Price Each
Open
Price Each
Restricted
22-093 Standard Standard Functions All $62.00 $79.00
Finished Trim Subassemblies/Components, Miscellaneous
Subassemblies/Components, Screw/Screw Packs, Cylinders
Product No Longer Available.
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
231231
H Series
H-1
Product No Longer Available.
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
232232
H-2
H Series
Product No Longer Available.
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
233233
H-3
H
Introduction
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
234
Product No Longer Available.
Complete Locks • H
234
H-4
H • Functions
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
235
Product No Longer Available.
235
H-5
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
236
Product No Longer Available.
236
H-6
H • Complete Locks
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
237
Product No Longer Available.
237
H-7
Complete Locks • H
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
238
Product No Longer Available.
238
H-8
H • Options
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
239
Product No Longer Available.
239
H-9
Options • H
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
240
Product No Longer Available.
240
H-10
H • Parts
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
241
Product No Longer Available.
241
H-11
Parts • H
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
242
Product No Longer Available.
242
H-12
H • Parts
Price Book 6
Effective July 9, 2018
S200-SeriesCS200-SeriesINTERCONNECTED
243
Product No Longer Available.
243
H-13
Parts • H
Price Book 6
Effective July 9, 2018
S200-Series CS200-Series INTERCONNECTED
244
Product No Longer Available.
244
H-14
H • Parts
H-SeriesCS200-SeriesINTERCONNECTED
245
Price Book 6
Effective July 9, 2018
S200-Series
Exploded View - S251PD
1" dia. (25mm)
2 holes
1-1/2"
38mm
2-1/4"
57mm
2-1/4"
57mm
1-1/8"
29mm
2-3/8"
60mm
2-1/8"
54mm
4"
102mm
Door Preparation
Mounting screws
Interconnect assembly
Deadbolt
1 " Throw
2 1/2" Adapter ring
1" Hardened steel insert
1" Trim ring
1/8" Hardened steel insert
1/8" Trim ring
6-Pin cylinder
Outside lever
6-Pin cylinder
Outside chassis and rose
Universal deadlatch
1/2" Throw
Inside chassis and lever
Box
Strike
Cylinder bar
Cylinder housing
Box
Strike
Wood frame
reinforcer
With #12 x 3 "
wood screws
Inside
escutcheon
S200-1
S200 Series
INTERCONNECT LOCK
H-Series CS200-Series INTERCONNECTED
246
Price Book 6
Effective July 9, 2018
S200-2
S200 Series
INTERCONNECT LOCK
To order Schlage products, descriptive data should be in the same sequence as shown below.
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. 6 denotes a lock or part that requires an extended lead time.
5. I denotes a handed product and requires handing to be specied.
6. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
7. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
8. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
9. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
10. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
11. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
12. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
13. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
14. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
15. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + Cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design: Specify only if different from the outside lever design
Inside Fin: Inside lever nish: Specify only if different from the outside nish
Hand: Hand of door: Only one hand allowed per line item. Example: RH=right hand, LH=left hand, RR=right reverse, LR=left reverse
Latch: Product latch: Leave blank for standard latch or specify part number if non-standard latch is required.
Strike: Product strike: Leave blank for standard strike or specify part number if non-standard strike is required.
Dr Thk: Door thickness: N/A for S200 line
Ext: Extension: N/A for S200 line
Dim: Dimension: Enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 S251PD NEP 626 FLA 613 RH 12-339 10-109 - - - -
H-SeriesCS200-SeriesINTERCONNECTED
247
Price Book 6
Effective July 9, 2018
S200-3
S200
Introduction
Product Identification
S2 51 P D
Latch Suffix
D = Deadlatch
Cylinder Suffix
P = 6-Pin Cylinder(s)
L = Less 6-Pin Cylinder(s)
R = Full Size Interchangeable
Core(s)
J = Less Full Size
Interchangeable Core(s)
T = Full Size Construction Core(s)
Z = Everest SL 7 pin Cylinder
Function
Lock Series
Finish Codes
and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
Standard Features
Certification UL Listed for 3-hour fire door.
Deadbolt 1 x 2 1/4”, Square corner faceplate, 1” housing diameter, 1” throw
Deadlatch 1 x 2 1/4”, Square corner faceplate, 1” housing diameter, 1/2” throw
Strikes 1 1/8” x 2 3/4”, Square corner, box (deadbolt) and 1 1/8” x 2 3/4”, Square corner, T-strike, box
(deadlatch)
Reinforcement Metal dust box reinforcer with three – 3” screws
Backset Adjustable for 2 3/8” or 2 3/4”
Cylinder(s) 6-Pin upper cylinder and 6-pin lower cylinder, solid brass, keyed 6-pin, S123 keyway, keyed different
(KD) — upper and lower cylinders are keyed alike
Door Range 1 3/8” – 2”
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
Table of Contents
Functions S200-4
Complete Locks S200-5
Options S200-7
Deadbolts/Deadlatches ................... S200-7
Deadbolt Strikes .......................... S200-7
Deadlatch Strikes ......................... S200-7
Strike Combinations ...................... S200-7
Locks Less Components ................... S200-7
Primus® / Primus XP ...................... S200-7
Parts S200-8
Levers and Related Parts ..................S200-8
Escutcheons .............................. S200-8
Trim Combinations ........................ S200-8
Deadbolts ................................S200-8
Deadlatch ................................ S200-9
Deadbolt/Deadlatch Combinations ....... S200-9
Deadbolt Strikes .......................... S200-9
Deadlatch Strikes ......................... S200-9
Deadbolt/Deadlatch Strike
Combinations .............................S200-9
Miscellaneous Parts/Adapters .............S200-10
Screws ....................................S200-10
Screw Packs ..............................S200-10
Cylinders ..................................S200-10
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
H-Series CS200-Series INTERCONNECTED
248
Price Book 6
Effective July 9, 2018
S200 • Functions
UL Listed for 3-hour fire door.
SCHLAGE ANSI
S210PD F95
S251PD F97
Entrance, Single Locking
Deadbolt operated by key from
outside or by turn unit from inside.
Bolt automatically deadlocks when fully
thrown. Latch retracted by lever from
either side. Turning inside lever retracts
deadbolt and latch simultaneously for
immediate exit.
S280PD F98 Storeroom Lock
Deadbolt operated by key from
outside or by turn unit from inside.
Bolt automatically deadlocks when fully
thrown. Outside lever fixed when locked.
Entrance by key unlocking lever for access.
Turning inside lever retracts deadbolt and
latch simultaneously for immediate exit.
Latch automatically deadlocks when door
is closed.
Entrance, Double Locking
Deadbolt operated by key from
outside or by turn unit from inside.
Bolt automatically deadlocks when
fully thrown. Outside lever unlocked
by key from outside when locked by turn
button in inside lever. Turning inside lever
retracts deadbolt and latch simultane-
ously for immediate exit. Latch automati-
cally deadlocks when door is closed.
S290 Single Dummy Trim
Dummy trim for inside of door.
Used for door pull or as matching inac-
tive trim.
S270PD Classroom Lock
Deadbolt operated by key from
outside or by turn unit from inside.
Bolt automatically deadlocks when
fully thrown. Outside lever is locked and
unlocked by key from outside. Turning inside
lever retracts deadbolt and latch simultane-
ously for immediate exit.
Latch automatically deadlocks when
door is closed.
S200-4
H-SeriesCS200-SeriesINTERCONNECTED
249
Price Book 6
Effective July 9, 2018
S200-5
Complete Locks • S200
Commercial Lever Suite
S200 Lock S Lock 98/99 Exit ND Levers AL Lock L Lock Levers
Jupiter Jupiter 07 Athens Jupiter 07
Neptune Neptune 17 Sparta Neptune 17
Saturn Saturn 06 Rhodes Saturn 06
Flair Flair Asti Asti
Escutcheons
Saturn (SAT) Flair (FLA)
Jupiter (JUP)Neptune (NEP) Saturn (SAT) Flair (FLA)
Specify hand
Strikes, Deadbolts
10-094 10-064 10-092 10-095 10-112
Strikes, Deadlatches
10-001 10-026 10-027 10-058
Latches
12-288 16-480
H-Series CS200-Series INTERCONNECTED
250
Price Book 6
Effective July 9, 2018
S200 • Complete Locks
S200-6
Function Description
Design and Finishes Primary Cylinder Adjustments
Available Levers
Available Finishes
SAT JUP NEP IFLA
626 605 606
6609 619 625 613 LD RD
TD* JD
Keyless ALL SAT JUP NEP
S290 Single Dummy 307 313 323 605 606 6609 613 619 625
Keyed, Single Cylinder LD RD
TD JD
S210PD Entrance 469 481 499 -62 37 -34
Keyed, Double Cylinder
LD
CD
RD
TD JD
S251PD Entrance
612 624 642 -124 74 -68S270PD Classroom
S280PD Storeroom
Secondary
Cylinder
Adjustment
EVEREST AND RESTRICTED KEYWAY - DOES NOT APPLY TO PRIMUS
EVEREST D & T FAMILY & RESTRICTED KEYWAYS (QUAD, NUMBERED, REVERSE) +17.00
SL Cylinder with Everest B or Everest R keyways +17.00
PRIMUS/PRIMUS XP - ORDER THE LOCK LESS CYLINDER AND THE CYLINDER SEPERATELY (PRICES BELOW)
SINGLE KIL EXAMPLE: 1 EA. S210LD & 1 EA. 24-769(-XP) +137.00
DOUBLE KIL EXAMPLE: 1 EA. S251LD & 1 EA. 24-769(-XP)
1 EA. 20-752(-XP) +274.00
SINGLE FSIC EXAMPLE: 1 EA. S280JD & 1 EA. 20-740(-XP) +148.00
DOUBLE FSIC EXAMPLE: 1 EA. S251JD & 2 EA. 20-740(-XP) +296.00
* Temporary cores (TD option) require non-refundable core handling charge (50-231) of $10.10 and will be added to the price of the lock.
H-SeriesCS200-SeriesINTERCONNECTED
251
Price Book 6
Effective July 9, 2018
S200-7
Options • S200
Deadbolts/Deadlatches, Deadbolt Strikes, Deadlatch Strikes, Strike Combinations
Deadbolts/Deadlatches
Combo Part
Number Deadbolt Deadlatch Backset - Hsg Dia. - Description Lock Adjustment
16-481 12-288 16-480 2 3/8" or 2 3/4" - 1" - Square corner, 1” x 2 1/4”
N/C 16-482 12-289 16-204 2 3/8" or 2 3/4" - 1" - Round corner, 1” x 2 1/4”
16-483 12-291 16-228 2 3/8" or 2 3/4" - 1" - Square corner, 1 1/8” x 2 1/4”
16-484 12-633 16-132
5" - 1" - Square corner, 1 1/8” x 2 1/4”, deadbolt, and square corner, 1” x 2
1/4”, deadlatch (Includes G506-815 housing sleeve for latch and bolt for
1 1/8” preparation
+31.20
Deadbolt Strikes
Part Number Lip Length - Description Lock Adjustment
10-094 N/A - Square corner, 1 1/8" x 2 3/4"
N/C
10-064 N/A - Circular drive-in, thimble strike, 1 3/16” diameter, 494 (626 only)
10-092 1 1/8" - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4”
10-095 1 1/8" - 1/4” Square corner, full lip, no box, 1 5/8” x 2 1/4”
Deadlatch Strikes
Part Number Lip Length - Description Lock Adjustment
10-001 1 1/8" - Square corner, T-strike, box, 1 1/8” x 2 3/4”
N/C
10-026 1 1/8" - Square corner, full lip, no box, 1 5/8” x 2 1/4”
10-027 1 1/8" - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4”
10-058 1 7/32" - Circular, adjustable, 1 3/4” diameter (605 & 626 only)
Strike Combinations
Deadbolt
Strike Deadlatch Strike
Specify
Combo
Number Lock Adjustment
10-094 10-001, 1 1/8” Lip 10-109
N/C
10-064 10-001, 1 1/8” Lip 10-251
10-094 10-026 10-110
10-064 10-026 10-253
10-094 10-027 10-111
10-064 10-027 10-256
10-092 10-027 10-257
10-064 10-058 10-258
10-095 10-026 10-259
Locks Less Components
Description Specify Lock Adjustment
Less deadbolt LLL for deadbolt strike
Example: S251PD NEP 626 LLL/16-480 10-109 -20.00
Less deadlatch LLL for deadlatch strike
Example: S251PD NEP 626 12-288/LLL 10-109 -23.00
Less deadbolt strike LLL for deadbolt strike
Example: S251PD NEP 626 16-481 LLL/10-001 -2.30
Less deadlatch strike LLL for deadlatch strike
Example: S251PD NEP 626 16-481 10-094/LLL -5.10
Shaded items are standard components and are
furnished with locks unless otherwise specified.
H-Series CS200-Series INTERCONNECTED
252
Price Book 6
Effective July 9, 2018
S200 • Parts
S200-8
Levers and Related Parts, Escutcheons, Trim Combinations, Deadbolts
Levers and Related Parts
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
08-020, 08-027, 08-030 • • 6••••
Part Number Description Price Each
08-020*Lever - keyed, JUP NEP SAT IFLA $76.00
08-027*Lever - FSIC, JUP NEP SAT 76.40
08-030*Lever - FSIC, driver, retainer (converts PD to JD), JUP NEP SAT 92.20
S605-242 Full size core driver 9.30
S605-241 Full size core retainer 4.30
S605-194 Lever insert for FSIC 4.00
*Specify part number, style & nish. Ex: 08-020 SAT 626
Escutcheons
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
08-032, 36-056 • • 6••••
Part Number Description Price Each
08-032 Inside escutcheon assembly SAT FLA $113.00
36-056 Outside trim, tie-in escutcheon MET 49.10
Trim Combinations
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
68-001, 68-003, 68-004, 08-034, 08-035 • • 6••••
Part Number Description Price Each
68-001* S210 - Outside Chassis, Rose and Lever JUP NEP SAT IFLA $108.00
68-003* S251, S270 - Outside chassis and rose assembly for S51 and S70 function.
Requires outside lever 83.40
68-004* S280 - Outside Chassis and Rose SAT
08-034* S210, S270, S280 - Inside Chassis and Lever JUP NEP SAT IFLA 114.00
08-035* S251 - Inside Chassis and Lever JUP NEP SAT IFLA 128.00
*Specify part number, style & nish. Ex: 68-001 JUP 626
Deadbolts
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
12-288, 12-289, 12-091, 12-633 • • 6••••
39-030 • •
Part Number Backset - Description Price Each
12-288 2 3/8" or 2 3/4" - Square corner, 1” x 2 1/4” $36.00
12-289 2 3/8" or 2 3/4" - Round corner, 1”x 2 1/4”
12-291 2 3/8" or 2 3/4" - Square corner, 1 1/8” x 2 1/4” 40.80
12-633 5" - Square corner, 1 1/8” x 2 1/4” 89.80
39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4” high square corner
strikes to 1/2” rabbeted door and frame preparations. 56.40
H-SeriesCS200-SeriesINTERCONNECTED
253
Price Book 6
Effective July 9, 2018
S200-9
Parts • S200
Deadlatch, Deadbolt/Deadlatch Combinations,
Deadbolt Strikes, Deadlatch Strikes, Deadbolt/Deadlatch Strike Combinations
Deadlatch
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
16-480, 16-204, 16-228, 16-132 • • 6••••
39-030 • •
Part Number Backset - Description Price Each
16-480 2 3/8" or 2 3/4" - Square corner, 1” x 2 1/4”
$34.9016-204 2 3/8" or 2 3/4" - Round corner, 1”x 2 1/4”
16-228 2 3/8" or 2 3/4" - Square corner, 1 1/8” x 2 1/4”
16-132 5" - Square corner, 1 1/8” x 2 1/4” 45.20
39-030 Rabbeted latch and strike kit - adapts square corner latches and 2 3/4” high square corner
strikes to 1/2” rabbeted door and frame preparations. 56.40
Deadbolt Strikes
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
10-094, 10-064, 10-092, 10-095 • • 6••••
Part Number Lip Length - Description Price Each
10-094 N/A - Square corner, 1 1/8” x 2 3/4” $12.20
10-064 N/A - Circular drive-in, thimble strike, 1 3/16” diameter, 494 (626 only) 16.20
10-092 1 1/8" - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 7.90
10-095 1 1/8" - Square corner, full lip, no box, 1 5/8” x 2 1/4”
10-112 N/A - Metal dust box with screws 11.70
Deadbolt/Deadlatch Combinations
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
16-481, 16-482, 16-483, 16-484 • • 6••••
Part Number Backset - Description Deadbolt Deadlatch Price Each
16-481 2 3/8" or 2 3/4" - Square corner, 1” x 2 1/4” 12-288 16-480 $70.90
16-482 2 3/8" or 2 3/4" - Round corner, 1”x 2 1/4” 12-289 16-204 70.90
16-483 2 3/8" or 2 3/4" - Square corner, 1 1/8” x 2 1/4” 12-291 16-228 75.70
16-484 5" - Square corner, 1” x 2 1/4” 12-633 16-132 135.00
Deadlatch Strikes
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
10-001, 10-026, 10-027 • • 6••••
10-058 • •
Part Number Lip Length - Description Price Each
10-001 1 1/8” - Square corner, T-strike, box, 1 1/8” x 2 3/4” $6.50
10-026 1 1/8” - Square corner, full lip, no box, 1 5/8” x 2 1/4”, 7.60
10-027 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4”
10-058 1 7/32” - Circular, adjustable, 1 3/4” diameter, 605 and 626 only 10.90
Deadbolt/Deadlatch Strike Combinations
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
10-109, 10-251, 10-110, 10-253, 10-111, 10-256, 10-257, 10-258, 10-259 • • 6••••
Part Number Deadbolt Strike Deadlatch Strike Price Each
10-109 10-094 10-001, 1 1/8" lip $18.70
10-251 10-064 10-001, 1 1/8" lip 22.70
10-110 10-094 10-026 19.80
10-253 10-064 10-026 23.80
10-111 10-094 10-027 19.80
10-256 10-064 10-027 23.80
10-257 10-092 10-027 15.50
10-258 10-064 10-058 27.10
10-259 10-095 10-026 15.50
H-Series CS200-Series INTERCONNECTED
254
Price Book 6
Effective July 9, 2018
S200 • Parts
S200-10
Miscellaneous Parts/Adapters, Screws, Screw Packs, Torx Screw Packs, Cylinders
Miscellaneous Parts/Adapters
Part Number Description Price Each
G506-815 1” Long bolt or latch housing sleeve to adapt 7/8” diameter housing to 1” bore $6.70
08-000 Interconnect assembly 106.00
F506-867 Rotational stop 4.50
Screws
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
C603-897, S605-297 • • 6••••
Part Number Description Type Size Price Each
B502-998* Mounting, upper cylinder PFH Cross Recess 10-32 x 2 1/4” $1.40
C603-897* Latch and strike PFH Combo #8 x 3/4” 0.88
S605-289* Mounting, lower chassis PFH 8-32 x 1 1/4” 1.60
S605-297* Escutcheon (2 req.) POH 6-32 x 3/8” 1.70
* Order in multiples of 100
Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
S306-151 • • 6••••
Part Number Description Contents Price Each
S306-151 Mounting screws (2) S605-289
(2) B502-998 $9.70
Torx Screw Packs
Available Finishes - Specify for Listed Parts 605 606 609 613 619 625 626
C203-311 • • 6••••
Part Number Description Contents Price Each
C203-311* Latch and strike (2 req.) (4) C503-766 (T-15) $20.70
* Torx screw packs are furnished with appropriate T-xx installation tool(s)
Cylinder Reference Table
Available Finishes - Specify for Listed Parts 606 626
21-059, 20-752/XP, 20-552/XP, 22-081, 24-769/XP, 24-569/XP
Part Number Cylinder Mechanism Function Design
Price Each
Open
Price Each
Restricted
21-059 Standard
Keyed Levers
All
$62.00 $79.00
91-007 Standard
20-752 Primus
137.0020-752-XP Primus-XP
91-722-XP Everest SL Primus XP (R/B Keyways only) 137.00
20-552 Primus UL437 169.00
20-552-XP Primus UL437-XP
22-081 Standard - 6-pin
Deadbolts
62.00 79.00
24-769 Primus 137.00
24-769-XP Primus-XP
91-729-XP Everest SL Primus XP (R/B Keyways only) 137.00
24-569 Primus UL437 169.00
24-569-XP Primus UL437-XP
S-SeriesTUBULAR
255
Price Book 6
Effective July 9, 2018
LT Series
GRADE 2 TUBULAR LEVERED LOCK
Rose Privacy rose (2)
Privacy pin
Spanner
wrench
Pin wrench
Rose (2)
Mounting plate assembly
Inside mounting plate
Spring cage assembly
Spring cage assembly
Door plate
Latch faceplate
and screws
Strike
and screws
Door plate
Passage latch
Privacy latch
Alignment
collar
Spindle assembly
Mounting screws (2)
Lever and bushing
assembly (2)
Lever and bushin
g
assembly (2)
Privacy lock only
LT-1
S-Series TUBULAR
256
Price Book 6
Effective July 9, 2018
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs are not available for the LT Series.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
LT-2
LT Levers
Ordering Procedures
To order Schlage LT locks, descriptive data should be in the same sequence as shown below.
Line Item: Line item number
Qty: Quantity
Product: Product function
Outside Des: Lever design + rose code
Outside Fin: Finish
Inside Des: Not applicable for the LT Series, leave blank. (mixed trim not available)
Inside Fin: Not applicable for the LT Series, leave blank. (mixed trim not available)
Hand: Specify RH or LH for single dummy functions only (universal design does not require handing on functions with two levers)
Latch: Product latch, leave blank for standard latch or specify part number if non-standard
Strike: Product strike, leave blank for standard strike or specify part number if non-standard
Dr Thk: Door thickness, leave blank for standard thickness or specify if non-standard (2" maximum)
Ext: Not applicable for the LT series, leave blank.
Dim: Not applicable for the LT Series, leave blank.
Additional
Details: Enter any special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 LT40 M63B 630 THP-8201 10-004 2"
S-SeriesTUBULAR
257
Price Book 6
Effective July 9, 2018
LT
Introduction
Product Identification
LT 40 F
UL Fire Rated (optional)
Function
Lock Series
Standard Features
Locks are furnished with standard features unless otherwise specified.
Certification ANSI/BHMA Certified ANSIA156.2-2011, Series 4000, Grade 2. Available UL Listed for 20 minute fire door.
Latch 1 1/8" x 2 1/4", Square corner faceplate, 7/8" housing diameter, 1/2" throw
Strike 1 1/8" x 2 3/4", Square corner, T-strike, Box
Backset 2 3/4" standard, 2 3/8” optional
Door Range 1 3/8" - 1 3/4"
LT-3
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
609 (US5) Antique Brass
619 (US15) Satin Nickel
622 (US19) Matte Black
625 (US26) Bright Chromium Plated
626 (US26D) Satin Chromium Plated
626AM Antimicrobial Coating on Satin
Chromium
629 (US32) Bright Stainless Steel
630 (US32D) Satin Stainless Steel
630AM Antimicrobial Coating on Satin
Stainless Steel
643e (US11) Aged Bronze
Table of Contents
Functions LT-4
Complete Locks LT-4
Options LT-8
Parts LT-9
Levers, Roses, and Latches & Strikes ..........LT-9
Miscellaneous Parts ..........................LT-10
How To Order Forms & Examples
S-Series TUBULAR
258
Price Book 6
Effective July 9, 2018
LT-4
LT • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, Available UL listing
Non-Keyed Locks
SCHLAGE ANSI
LT10 Passage Latch
Both levers always unlocked.
LT40 Privacy Lock
Both levers unlocked unless outside
lever locked by push-button on inside rose.
Turning inside lever or inserting emergency
key into outside rose unlocks outside lever.
Restoring feature unlocks outside lever by
closing the door.
LT170 Single Dummy Trim
Dummy trim for one side of door.
LT172 Pair Dummy Trim
Dummy trim for both sides of door.
Standard Lever Collection*B or C Rose Trim
LT • Complete Locks*
LT-Series (B or C Rose Trim) - Standard Levers
Function Description
Lever Designs
Standard Lead time: 03, 06, 07, 12, 17, OME
6: 01, 02, 05, 18, LAT, LON, ACC†, AST†, MER†
† Not available 629, 630
Finishes
605 606 609 619 622 625 626 629 630 643e
Keyless Functions
LT10 Passage $251.00
LT10F Passage, Firerated 259.00
LT40 Privacy 265.00
LT40F Privacy, Firerated 272.00
LT170 Single Dummy 119.00
LT172 Pair Dummy 241.00
S-SeriesTUBULAR
259
Price Book 6
Effective July 9, 2018
LT-5
Complete Locks • LT
01
06
18
Accent (ACC)
02
07
LAT
Asti (AST)
03
12
LON
Merano (MER)
05
17
OME
4¹⁄₈"
2"
3¹⁄₈"
2⁹⁄₁₆"
4"
2"
2⁵⁄₈"
2⁹⁄₁₆"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
2¹¹⁄₁₆"
2¹⁄₁₆"
3⁷⁄₈"
2¹³⁄₁₆"
1¹³⁄₁₆"
4³⁄₄"4³⁄₄"
2¹³⁄₁₆"
¹⁄₂" Dia. ¹¹⁄₁₆"
2⁷⁄₈"
3³⁄₄"
2⁹⁄₃₂"
2¹⁄₂"
¹⁄₂"
4⁵⁄₈"
2⁷⁄₈"
4⁵⁄₈"
1³¹⁄₃₂"
3¹⁄₁₆"
2"
4⁵⁄₈"
¹⁄₂"
3"
4³⁄₄"
2¹¹⁄₁₆"
2¹⁄₃₂"
4⁷⁄₈"
2
⁹⁄₁₆
"
4³⁄₄"
2"
4¹⁄₈"
2"
3¹⁄₈"
4"
2"
2⁵⁄₈"
4"
2"
3¹⁄₈"
2⁹⁄₁₆"
4⁷⁄₈"
¹⁄₂"³⁄₈"
2³⁄₁₀"
5¹⁄₁₆"
3⁵⁄₁₆"
Not available with C Rose
Cast or Forged Lever Designs with Wrought Roses
Standard Lever Collection*B or C Rose Trim
Wrought Rose Designs
B C
2 9/16" (65mm) diameter 2 5/8" (66mm) diameter
Note: Above images shown with
B Rose. Design of LT lock allows
the inside and outside levers to
be interchanged; as a result, it is
not necessary to specify handing.
S-Series TUBULAR
260
Price Book 6
Effective July 9, 2018
LT-6
LT • Complete Locks M Lever Collection*B or C Rose Trim
LT-Series (B or C Rose Trim) - M Collection Levers
Function Description
Lever Designs
Standard Lead time: M51, M52, M81
6: M53, M54, M55, M56, M57†, M61, M62†, M63, M82, M83, M84, M85
† Available 629 and 630 only
Finishes
605 606 609 619 622 625 626 629 630 643e
Keyless Functions
LT10 Passage $251.00
LT10F Passage, Firerated 259.00
LT40 Privacy 265.00
LT40F Privacy, Firerated 272.00
LT170 Single Dummy 119.00
LT172 Pair Dummy 241.00
S-SeriesTUBULAR
261
Price Book 6
Effective July 9, 2018
M Lever Collection* B or C Rose Trim
Cast or Forged Lever Designs with Wrought Roses
Note: Above images shown with B
Rose. Design of LT lock allows the
inside and outside levers to be inter-
changed; as a result, it is not necessary
to specify handing except with single
dummy function.
LT • Complete Locks
LT-7
Wrought Rose Designs
M51
4.5"
2.4"
3.2"
4.5"
2.4"
3.2"
M54
M57
M63
M83
ME1
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
2.125”
5.5”
3.0”
0.4”
4.35”
2.3”
2.75”
2.14”
2.9”
2.15”
4.5”
4.5”
3.2”
2.1”
4.6”
2.9”
0.4”
2.125”
5.5”
3.0”
0.4”
M52
4.5"
2.2"
3"
4.5"
2.2"
3"
M55
M61
M81
M84
ME2
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
2.125”
5.2”
2.8”
0.4”
4.3”
3”
2.14”
4.5”
3.2”
2.1”
4.8”
0.4”
2.9”
2.1”
5.1”
3”
0.4”
2.125”
5.2”
2.8”
0.4”
M53
3.2”
2.6”
4.35”
3.2”
2.6”
4.35”
M56
M62
M82
M85
ME3
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
2.125”
5.1”
3.2”
0.4”
2.4” 4.6”
3”
2.1”
4.5”
2.7”
1.9”
2.2” 4.8”
2.9”
0.4”
4.9”
3.3”
0.3”
2.125”
5.1”
3.2”
0.4”
Ispecify hand Ispecify hand
Ispecify hand
Ispecify hand
B C
S-Series TUBULAR
262
Price Book 6
Effective July 9, 2018
LT-8
LT • Options Latches, Strikes, Non Standard Door Thickness
Antimicrobial Coating
Latches
Specify Description List Price Adjustment
Non-Firerated Latches
THP-8301 Passage Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors.
N/C
THP-8201 Passage Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors.
THP-8319 Privacy Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors.
THP-8219 Privacy Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors.
Firerated Latches
THP-8301-F Passage Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors.
N/C
THP-8201-F Passage Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors.
THP-8319-F Privacy Latch, 2 3/4" backset. 1 1/8" x 2 1/4" square faceplate. Standard, typical for > 1 3/4" thick doors.
THP-8219-F Privacy Latch, 2 3/8" backset. 1" x 2 1/4" square faceplate. Typical for 1 3/8" thick doors.
Strikes
Specify Description List Price Adjustment
10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) N/C
10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" $7.50
10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length N/C
10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length
10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" 27.20
K510-066 Box for 10-025 ANSI strike
N/C
10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length
10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length
C603-623 Box for 10-001 T-Strike
Ordering instructions: specify desired strike on order only if requesting different from standard
Non Standard Door Thickness
Description Specify List Price Adjustment
Door thickness Extension kit for doors > 1 3/4" up to 2" thick, extended equally 10.10
Ordering instructions: Include thickness dimension in order. EX: LT40 06B 626 2" (LT40 function, 06B trim, 626, 2" door thickness)
Antimicrobial Coating
Specify Description List Price Adjustment
626AM or 630AM Adds silver-ion based antimicrobial coating to inside and outside lever, bushing, rose, and privacy pin
(if applicable) $49.40
Ordering instructions: Specify nish as either 626AM or 630AM
S-SeriesTUBULAR
263
Price Book 6
Effective July 9, 2018
LT-9
Parts • LT
Levers, Knobs, Roses and Latches & Strikes
Levers
Levers & Knobs
Style Lever & Knob Design 605 606 609 619 622 625 626 629 630 643e
Standard 016, 026, 03, 056, 06, 07, 12I, 17, 18, OME6••••••••• •
LAT6, LON6••••••••• •
ACCI, ASTI, MERI••••••• •
Decorative M51, M52, M536, M546, M556, M566, M616I, M636I, M81, M826,
M836, M846, M856I, ME16I, ME26I, ME36••••••••• •
M576I, M626I • •
6Extended Factory Lead Time Ispecify handing
Part Number Description Standard Levers Decorative Levers
09-502 Lever with bushing only $176 $191
Ordering instructions: Specify part number, lever style, nish. Ex: 09-502 03 626
Roses
Roses
Available Finishes 605 606 609 619 622 625 626 629 630 643e
••••••••• •
Part Number Description Price Each
09-403 xx Passage Rose; specify (xx) as either B or C Rose design
$98.7009-486 Privacy Rose, ‘B’ design
09-459 Privacy Rose, ‘C’ design
Ordering instructions: Specify part number + nish. Ex: 09-403 B 626
Latches & Strikes
Available Finishes 605 606 609 619 622 625 626 629 630 643e
••••••••• •
Part Number Description Price Each
Springlatches
THP-8301-CH Passage Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate.
Typical for > 1 3/4" doors. Includes screws. 63.10
THP-8301-F-CH Passage Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate.
Typical for > 1 3/4" doors. Includes screws. UL-20 minute rerated. 66.70
THP-8201-CH Passage Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate.
Typical for 1 3/8" doors. Includes screws. 63.10
THP-8201-F-CH Passage Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate.
Typical for 1 3/8" doors. Includes screws. UL 20 minute rerated. 69.10
THP-8319-CH Privacy Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate.
Typical for > 1 3/4" doors. Includes screws. 63.10
THP-8319-F-CH Privacy Latch Assembly, 2 3/4" backset, 1 1/8" x 2 1/4" square faceplate.
Typical for > 1 3/4" doors. Includes screws. UL 20 minute rerated. 69.10
THP-8219-CH Privacy Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate.
Typical for 1 3/8" doors. Includes screws. 63.10
THP-8219-F-CH Privacy Latch Assembly, 2 3/8" backset, 1 " x 2 1/4" square faceplate.
Typical for 1 3/8" doors. Includes screws. UL 20 minute rerated. 69.10
Strikes
10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard
strike) $6.90
10-001 xx
Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1
1/4",
1 1/2", 1 3/4", 2"
14.40
10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 10.80
10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 15.20
10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" 42.40
K510-066 Box for ANSI strike (nish not applicable) 7.00
10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length 8.10
10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length
C603-623 Box for 10-026 or 10-001 T-strike (nish not applicable) 0.66
Ordering Instructions: Specify part number and nish. if applicable.
S-Series TUBULAR
264
Price Book 6
Effective July 9, 2018
Miscellaneous Parts
Available Finishes 605 606 609 619 622 625 626 629 630 643e
••••••••• •
Part Number Description Price Each
THP-022 Privacy Pin 20.20
THP-021 Privacy Pin Stand off (for > 1 3/4" to 2" thick doors) (nish not applicable) 6.30
THP-S88806-IR Spindle Assembly (nish not applicable) 20.10
L583-685 Latch Alignment Collar (nish not applicable) 19.50
L283-031 Inside Mounting Plate 37.90
L283-340 Outside Mounting Plate Assembly, 1 3/8" - 1 3/4" thick doors (nish not
applicable) 37.90
L283-378 Outside Mounting Plate Assembly, > 1 3/4" - 2" thick doors (nish not
applicable) 44.20
L283-341 LT Springcage (nish not applicable) 22.70
L583-682 Door Plate (nish not applicable) 15.20
L583-684 Dummy Springcage for LT0170 & LT0172 functions (nish not applicable) 30.40
L583-708 Wrench, pin (emergency pin for privacy function) (nish not applicable) 2.60
B202-517 Strike and Latch Screws (4 screw total) 8.10
L583-584 Mounting Plate screws (requires 2 per lock) 3.70
F506-455 Screw, Combination wood/metal 0.68
Ordering Instructions: Specify part number and nish. if applicable
LT-10
LT • Parts Miscellaneous Parts
LT-SeriesTUBULAR
265
Price Book 6
Effective July 9, 2018
S Levers
GRADE 2 TUBULAR LEVERED LOCK
Inside chassis
and lever
Inside rose
Mounting screws
Outside chassis
and rose
Universal deadlatch
1/2" Throw
Outside lever
6
-Pin cylinder Box
Strike
S-Series
Exploded View - S51PD
Door Preparation
S-1
LT-Series TUBULAR
266
Price Book 6
Effective July 9, 2018
S-2
S Levers
Ordering Procedures
To order Schlage products, descriptive data should be in the same sequence as shown below.
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders.
See Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product function + cylinder code
Outside Des: Outside lever design
Outside Fin: Outside nish
Inside Des: Inside lever design, specify only if different from the outside lever design
Inside Fin: Inside lever nish, specify only if different from the outside nish
Hand: Hand of door, specify only for Flair (FLA) lever design
Latch: Product latch, leave blank for standard latch or specify part number if non-standard latch is required. LLL = less latch
Strike: Product strike, leave blank for standard strike or specify part number if non-standard strike is required. LLL = less strike
Dr Thk: Door thickness, leave blank (S lock only has standard compatibility with 1 3/8" -2" doors except for S40D, 1 3/8" - 1 7/8")
Ext: Extension, leave blank for S lock
Dim: Dimension, enter only for non-standard strike lip length
Additional
Details: Enter additional detail for keying information or special requirements
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 S51PD FLA 626 FLA 613 RH 16-204 10-025 1316 KA
LT-SeriesTUBULAR
267
Price Book 6
Effective July 9, 2018
S
Introduction
Product Identification
S 51 P D
Latch Suffix
D = Deadlatch
Cylinder Suffix
P = 6-Pin Cylinder
L = Less 6-Pin Cylinder
R = Full Size Interchangeable
Core
J = Less Full Size
Interchangeable Core
T = Full Size Construction Core
Z = Everest SL 7 pin Cylinder
Function
Lock Series
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
Standard Features
Certification ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Latch 1” x 2 1/4”, Square corner faceplate, 7/8” housing diameter, 1/2” throw
Strike 1 1/8” x 2 3/4”, Square corner, T-strike, box
Backset Dual backset latch, fits either 2 3/8” or 2 3/4” backsets
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range 1 3/8” – 2” (except S40D: 1 3/8” – 1 7/8”)
Keys Two nickel silver cut keys per lock, 6-pin, S123 section
S-3
Table of Contents
Functions S-4
Complete Locks S-5
Options S-7
DeadLatches ...................................S-7
Strikes .........................................S-7
Locks Less Components ........................S-7
Tactile Warning and Tamper Resistant
Torx® Screws ..................................S-7
Parts S-8
Levers, Roses, and Chassis Parts ................S-8
Latches & Strikes ..............................S-8
Adapters .......................................S-9
Screws .........................................S-9
Standard Screw Packs .........................S-9
Torx Screw Packs ..............................S-9
Special Parts ...................................S-9
Cylinders ......................................S-10
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
268
LT-Series TUBULAR
Price Book 6
Effective July 9, 2018
S-4
S • Functions
ANSI/BHMA Certified A156.2-2011, Series 4000, Grade 2, UL Listed for 3-hour fire door.
Non-Keyed Locks
SCHLAGE ANSI
S10D F75 Passage Latch
Both levers always unlocked.
S40D F76 Bath/Bedroom Privacy Lock
Push-button locking. Can be unlocked
from outside with small circular tool.
Turning inside lever releases button.
Closing the door does not release
button (restoring).
S51PD F81 Entrance Lock
Outside lever locked and unlocked by key
or by thumbturn inside. Inside lever always
unlocked for immediate egress. Turning
inside lever does not unlock outside lever.
S70PD F84 Classroom Lock
Outside lever locked and unlocked by
key. Inside lever always unlocked for
immediate egress.
S80PD F86 Storeroom Lock
Outside lever fixed. Entrance by key
only. Inside lever always unlocked for
immediate egress.
S170 Single Dummy Trim
Dummy trim for one side of door.
Used for door pull or as matching
inactive trim.
Keyed Locks
SCHLAGE ANSI
269
LT-SeriesTUBULAR
Price Book 6
Effective July 9, 2018
S-5
Commercial Lever Suite
S Lock
(tubular)
L Lock
(mortise)
ND Lock
(cylindrical)
AL Lock
(cylindrical)
Von Duprin
(Exit Devices)
Saturn 06 Rhodes Saturn 06
Neptune 17 Sparta Neptune 17
Jupiter 07 Athens Jupiter 07
Flair Asti Asti
0.5”
2.5”
2.5”
4.2”
Saturn (SAT)
2.5”
2.5”
4.5”
0.6”
Neptune (NEP)
2.5”
2.5”
4.5”
1.8”
Jupiter (JUP)
4”
2.3”
1.8”
2.5”
Flair (FLA)
ISpecify hand
Complete Locks • S
Tactile Options
Saturn Lever Shown
Latches
Standard, Square Corner,
16-203
Option, Round Corner,
16-204
Strikes
Standard,
T-Strike,
10-001
Option,
ANSI Strike,
10-025
Option,
Full Lip Strike,
10-027
Tactile Warning (knurling)
LT-Series TUBULAR
270
Price Book 6
Effective July 9, 2018
Function Description
Designs and Finishes PRIMARY CYLINDER ADJUSTMENTS
SAT NEP JUP FLAILD = Less standard 6-pin cylinder
626 605 606
619 625
6609 613
JD = Less Full Size Core
RD = FSIC (Full Size Interchangable Core)
TD* = Full Size Construction Core
Keyless
SAT NEP
JUP FLAISAT NEP JUP
S10D Passage $194 $206 $224
S40D Privacy 240 252 270
S170 Single Dummy 91 97 107
Keyed, Single Cylinder LD JD RD TD*
S51PD Entrance
$304 $316 $334 -62 -34 37S70PD Classroom
S80PD Storeroom
Notes For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders.
See Terms and Conditions for ordering information and requirements.
SL Cylinder with Everest B or Everest R keyways add $17.00.
* Full size construction core locks are assessed a one-time non-refundable handing charge (50-231) per core
Ordering instructions: To change cylinder type from default 6-pn standard, change lock sufx as appropriate.
Ex: S51JD for S51 function less full size core.
Primus / Primus XP - available through specic channels based on security levels. See Terms & Conditions for details.
Specify Description Price Each
Primus Cylinders
LD Sufx Order lock less cylinder; order Primus cylinder 20-752 separately -$62
(deduct from lock price)
20-752 Primus Cylinder 137
Full-Size Interchangeable Primus Core
JD Sufx Order lock less full size core; order Primus core 20-740 separately -$34
(deduct from lock price)
20-740 Full-size interchangable Primus core 148
Ordering instructions: Add sufx to lock function, order Primus cylinder separately.
S-6
S • Complete Locks
LT-SeriesTUBULAR
271
Price Book 6
Effective July 9, 2018
S-7
Options • S
DeadLatches
Specify Description List Price Adjustment
16-203 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" square corner (standard latch)
(includes A501-878 latch adapter for 1 1/8” prep & G506-815 sleeve for 1” housing) N/C
16-204 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" round corner (1/4" radius)
16-132 5” backset, 1” x 2 1/4” square corner
(includes A501-897 latch adapter for 1 1/8” prep & G506-815 sleeve for 1” housing) $9.30
Ordering instructions: specify desired latch on order only if requesting different from standard.
Strikes
Specify Description List Price Adjustment
10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) N/C
10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" $6.90
10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length N/C
10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length
10-025 xx ANSI, no box, 1 1/4" x 4 7/8", specify lip length as 1 3/8" or 1 1/2" 14.00
K510-066 Box for ANSI strike
N/C10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length
10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length
Ordering instructions: specify desired strike on order only if requesting different from standard.
Locks Less Components
Description Specify List Price Adjustment
Less standard cylinder LD cylinder sufx
Example: S51LD Sat 626 -$62.00
Less deadlatch LLL for latch
Example: S51PD Sat 626 LLL 10-001 -19.90
Less strike LLL for strike
Example: S51PD Sat 626 16-203 LLL -4.40
Ordering instructions: specify on order only if requesting different from standard.
Tactile Warning and Tamper Resistant Torx® Screws
Specify Description List Price Adjustment
'8' lever prex Tactile warning applied to outside lever; specify lever design as 8SA for tactile on Saturn lever, 8JU for
tactile on Jupiter, etc. $43.80
Torx screws Tamper-resistant Torx screws; specify under "additional details" 17.90
DeadLatches, Strikes, Locks Less Components,
Tactile Warning and Tamper Resistant Torx® Screws
LT-Series TUBULAR
272
Price Book 6
Effective July 9, 2018
Levers, Roses, and Chassis Parts
Available Finishes 605 606 609 613 625 626
• • • 6•••
Part Number Description Price Each
Inside Chassis & Lever Assembly, Inside Rose
68-011 xxx Inside chassis & lever assembly for S10, S70, S80 function. Specify (xxx) as SAT NEP JUP FLAI lever
design $110.00
68-012 xxx Inside chassis & lever assembly for the S40 function.
Specify (xxx) as SAT NEP JUP FLAI lever design 120.00
68-013 xxx Inside chassis & lever assembly for the S51 function.
Specify (xxx) as SAT NEP JUP FLAI lever design
08-021 Rose for inside chassis & lever assembly 26.70
Outside Chassis, Rose and Lever (NON-KEYED)
68-001 xxx Outside chassis, rose & lever assembly for the S10 function.
Specify (xxx) as SAT NEP JUP FLAI lever design $108.00
68-002 xxx Outside chassis, rose & lever assembly for the S40 function
Specify (xxx) as SAT NEP JUP FLAI lever design 108.00
Outside Chassis & Rose (KEYED)
68-003 Outside chassis and rose assembly for S51 and S70 function. Requires outside lever (see section
below) $73.40
68-004 Outside chassis and rose assembly for S80 function. Requires outside lever (see section below)
Outside Keyed Lever, Standard Cylinder
08-020 xxx Outside lever for use with standard cylinder.
specify (xxx) as SAT NEP JUP FLAI$76.00
Outside Keyed Lever, Interchangeable Core, and Related Parts
08-027 xxx Full size core lever, specify (xxx) as SAT NEP JUP only $76.40
08-030 xxx Full size core lever, driver, retainer (converts PD to JD).
Specify (xxx) as SAT NEP JUP only 92.20
S605-241 Full size core retainer 4.30
S605-242 Full size core driver 9.30
S605-194 Lever insert for FSIC 4.00
Ordering Instructions: Specify part number and nish.
Latches & Strikes
Available Finishes 605 606 609 613 625 626
• • • 6•••
Part Number Description Price Each
Deadlatches
16-203 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" square corner (standard latch)
(includes A501-878 latch adapter for 1 1/8” prep & G506-815 sleeve for 1” housing) $36.30
16-204 Adjustable 2 3/8" or 2 3/4" backset, 1" x 2 1/4" round corner (1/4" radius)
16-132 5" backset, 1" x 2 1/4" square corner
(includes A501-897 latch adapter for 1 1/8” prep & G506-815 sleeve for 1” housing) 47.10
39-030 Rabbeted latch and strike kit, 605 and 626 nish only
(adapts square corner & 2 3/4” high square corner strikes to 1/2” rabbeted door and frame preps) 56.50
Strikes
10-001 Square corner, T-strike, box, 1 1/8" x 2 3/4", 1 1/8" lip length (standard strike) $6.90
10-001 xx Square corner, T-strike, box, 1 1/8" x 2 3/4", specify lip length (xx) as 1", 1 1/4", 1 1/2", 1 3/4", 2" 7.40
10-004 Round corner (1/4" radius), T-strike, box 1 1/8" x 2 3/4", 1 1/8" lip length 11.20
10-025 1316 ANSI, no box, 1 1/4" x 4 7/8", 1 3/16" lip length 15.20
10-025 138 ANSI, no box, 1 1/4" x 4 7/8", 1 3/8" lip length 42.50
K510-066 Box for ANSI strike 7.00
10-026 Square corner, full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length 8.10
10-027 Round corner (1/4" radius), full lip, no box, 1 5/8" x 2 1/4", 1 1/8" lip length
Ordering Instructions: Specify part number and nish.
S-8
S • Parts Levers, Roses, and Chassis Parts, Latches & Strikes
LT-SeriesTUBULAR
273
Price Book 6
Effective July 9, 2018
S-9
Parts • S
Adapters, Screws, Standard Screw Packs,
Torx® Screw Packs, Special Parts
38-018 A501-878 G506-815
Adapters
Available Finishes 605 606 609 613 625 626
• • • 6•••
Part Number Description Price Each
38-018 Thin door extension ring (2 required per lock) $12.80
A501-878 Latch front adapter (use with 1" faceplate in 1 1/8" door prep). Order in multiples of 100. Finish not
applicable. 0.76
G506-815 1" long latch housing sleeve to adapt 7/8" diameter housing to 1" bore. Finish not applicable. 6.80
Ordering Instructions: Specify part number and nish if applicable.
Screws
Available Finishes 605 606 609 613 625 626
• • • 6•••
Part Number Description Price Each
Individual Screws
C603-256 ANSI Strike screws, PFH combo, 12-24 x 1" $1.00
(order multiples of 100)
C603-897 Latch or standard strike screws, PFH combo, 8-32 x 3/4" 0.88
(order multiples of 100)
F506-278 Mounting screws, RPH Machine, 8-32 x 1 1/2" (nish not applicable) 1.20
(order multiples of 100)
F506-237 Mounting screws, wood, #8 x 3/4" (nish not applicable) 0.78
(order multiples of 100)
PFH = Phillips Flat Head RPH = Round Phillips Head
Screw Packs
Part Number Description Price Each
S306-180 Mounting Screws, S170 Contains: (2) S506-960
(nish not applicable) 4.90
S306-182 Mounting Screws, latch & strike Contains: (2) F506-278 (4) C603-897
(1) M504-271 11.40
S306-183 Mounting screws, latch & ANSI Strike Contains: (2) F506-278 (4) C603-256
(2) C603-897 (1) M504-271 11.40
Torx Screw Packs
C203-311 Latch and standard strike Contains: (4) C503-766 (T-15)
20.70
C203-312 Latch and ANSI strike Contains: (2) C503-766 (T-15)
(2) L583-371 (T-20)
Notes Torx screw packs are furnished with the appropriate T-xx installation tool(s)
Ordering Instructions: Specify part number and nish if applicable.
Special Parts 6Extended Lead Time
Available Finishes 605 606 609 613 625 626
• • • 6•••
Part Number Description Price Each
XQ07-351 10-025 strike, 7/8” at lip $41.50
XQ07-351 xxx 10-025 strike, lips through 6” (except 7/8”, 11 3/16”, 1 3/8” and 1 1/2”).
Specify (xxx) lip length in part number 200.00
Ordering Instructions: Specify part number and nish.
LT-Series TUBULAR
274
Price Book 6
Effective July 9, 2018
S-10
S • Parts
Cylinder Reference
Cylinder Mechanism Design Complete Cylinder
Price Each
Open Restricted
Standard
Keyed Levers
21-059 $62.00 $79.00
Everest SL (R/B Keyways only) 91-007 79.00
Primus®20-752 137.00
Primus XP 20-752-XP 137.00
Everest SL Primus XP (R/B Keyways only) 91-722-XP 137.00
Primus UL437 20-552 169.00
Primus UL437-XP 20-552-XP 169.00
SPECIALTY
275
Price Book 6
Effective July 9, 2018
HL-1
HL6/PL7/PL8 Series
HOSPITAL LATCH, TUBULAR AND MORTISE
Push/Pull Cover
Cover Screws
Mounting Screws
Pull Assembly
Latch
Strike
Screws
Latch
Screws
Strike
Strike Box
Push Assembly
Mounting Nuts
Lead Washers
(optional)
Lead Latch Cover
(optional)
Push/Pull Cover
(Tubular model shown)
SPECIALTY
276
Price Book 6
Effective July 9, 2018
Hospital Latch
Ordering Procedures
To order Schlage Hospital Latch product, descriptive data should be in the same sequence as shown below
Line Item Line item number
Qty Quantity
Function - Backset Tubular Model: HL6 (passage), PL7 (privacy, thumbturn on push side), PL8 (privacy, thumbturn on pull side)
Tubular Backset: -2 (2 3/4" backset), -3 (3 3/4" backset), -5 (5" backset), -7 (7"backset)
Mortise Model: Choose from list page HL-4
Mortise Backset: leave blank (backset always 2 3/4")
Finish
605 (US3, Bright Brass); 606 (US4, Satin Brass), 612 (US10, Satin Bronze), 613 (US10B, Oil Rubbed Bronze)
625 (US26, Bright Chrome), 626 (US26D, Satin Chrome), 626AM (Satin Chrome anti-microbial),
629 (US32, Bright Stainless Steel), 630 (US32D, Satin Stainless Steel)
Option B (brass lever material for 626 nish); EN (pull-side paddle only); EO (push-side paddle only); L (lead lined); SOC (pin-in-socket
security screws)
Engraving style If applicable - E1, E2, E3, E4, E5, E6, see page HL-8 for details
Strike Tubular: leave blank for standard strike, A for ASA strike, AS for both standard and ASA strike
Mortise: leave blank for standard strike, specify BT for bent-tab strike
Line
Item Qty Function-Backset Finish Option Engraving Strike
Tubular (bored) 1 10 HL6-5 626 B E6 A
Mortise 1 10 HL6-9070 626 B E6 BT
HL-2
SPECIALTY
277
Price Book 6
Effective July 9, 2018
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
612 (US 10) Satin Brass
613 (US 10B) Oil Rubbed Bronze
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
626AM Antimicrobial Coating on Satin Chromium
629 (US 32) Bright Stainless Steel
630 (US 32D Satin Stainless Steel
630AM Antimicrobial Coating on Satin Stainless Steel
Standard Features
Certifications Tubular (bored): UL Listed for 3-hour fire door, 4.0’ x 8.0’
Mortise: UL listed for 3-hour fire door, 4.0’ x 10.0’
Latchbolt Tubular (bored): 1/2” throw stainless steel
Mortise: 3/4” throw stainless steel
Backset Tubular (bored): specify as 2-3/4”, 3-3/4”, 5”, 7”
Mortise: 2 3/4” only
Door Range 1-3/4” only
HL
Introduction
HL-3
Table of Contents
Functions HL-4
Hospital latch HL-6
HL6/PL7/PL8 Tubular (bored) Hospital Latch HL-6
HL6 Mortise Hospital Latch ...................HL-7
Push/Pull Latches Engraving Guide ...........HL-8
Parts HL-9
SPECIALTY
278
Price Book 6
Effective July 9, 2018
HL6 Passage
Latchbolt retracted by paddle from either side
Inside paddle always free for immediate egress
PL8 Privacy, pull-side thumbturn
Latchbolt retracted by paddle from either side
unless outside locked by inside thumbturn or
outside cointurn. Actuating inside padde, rotating
inside thumbturn or outside cointurn unlocks door.
Inside paddle always free for immediate egress.
PL7 Privacy, push-side thumbturn
Latchbolt retracted by paddle from either side
unless outside locked by inside thumbturn or
outside cointurn. Actuating inside padde, rotating
inside thumbturn or outside cointurn unlocks door.
Inside paddle always free for immediate egress.
Tubular (Bored) • Lock Functions
HL-4
HL6-9010 F01 Passage Latch
Latchbolt retracted by paddle from either side
at all times. Inside paddle is always free for
immediate egress.
HL6-9070 F05 Classroom Lock
Latchbolt retracted by paddle from either side
unless outside is locked by key. Unlocked from
outside by key. Inside paddle always free for
immediate exit. Auxiliary latch deadlocks latchbolt
when door is locked. Inside paddle is always free
for immediate egress.
HL6-9040 F22 Bath/Bedroom Privacy Lock
Latchbolt retracted by paddle from either side
unless outside is locked by inside thumbturn.
Actuating inside paddle or closing door
unlocks outside paddle. To unlock from
outside, remove emergency button, insert
emergency thumbturn(furnished) in access
hole and rotate. Inside paddle is always free for
immediate egress.
HL6-9080 F07
Storeroom Lock
Latchbolt retracted by key outside or by paddle
inside. Outside paddle always inoperative. Auxiliary
latch deadlocks latchbolt when door is locked.
Inside paddle is always free for immediate egress.
HL6-9050 F04 Entrance/Office Lock
Latchbolt retracted by paddle from either side
unless outside is made inoperative by key outside
or by turning inside thumbturn. When outside is
locked, latchbolt is retracted by key outside or
by paddle inside. Outside paddle remains locked
until thumbturn is returned to vertical or unlocked
by key. Auxiliary latch deadlocks latchbolt when
door is locked. Inside paddle is always free for
immediate egress.
HL6-9082 F30 Institution Lock*
Latchbolt retracted by key from either side.
Paddle on both sides always inoperative.
Auxiliary latch deadlocks latchbolt when door is
locked.
HL6-9060 F09 Apartment Entrance Lock
Latchbolt retracted by paddle from either side
unless outside is locked by key from inside. When
locked, latchbolt retracted by key outside or paddle
inside. Auxiliary latch deadlocks latchbolt when
door is locked. Inside paddle is always free for
immediate egress.
HL6-9092EL
HL6-9092EU Electrically locking/unlocking outside lever,
Outside cylinder (replaces HL6-9080EL/EU)
Outside paddle continuously locked (EL) or
unlocked (EU) by 12 or 24V DC. Latchbolt retracted
by key outside or paddle inside. Aux latch
deadlocks latchbolt when door is locked. Inside
lever always free for immediate egress.
Mortise • Lock Functions
SPECIALTY
279
Price Book 6
Effective July 9, 2018
Mortise • Lock Functions
HL-5
HL6-9095EL
HL6-9095EU Electrically locking/unlocking both levers,
Inside and outside cylinder (replaces
HL6-9082EL/EU)
Inside and outside paddle continuously locked
(EL) or unlocked (EU) by 12 or 24V DC. Latchbolt
retracted by key inside or outside. Aux latch
deadlocks latchbolt when door is locked.
HL6-9466 F14 Store/Utility Room Lock*
Latchbolt retracted by paddle from either side.
Deadbolt thrown or retracted by key from either
side.
HL6-9453 F20 Entrance/Office Lock with Deadbolt
Latchbolt retracted by paddle from either side
unless outside is locked by 20° rotation of
thumbturn. Deadbolt thrown or retracted by 90°
rotation of thumbturn. When locked, key outside
or paddle inside retracts deadbolt and latchbolt
simultaneously. Outside paddle remains locked until
thumbturn is restored to vertical position. Throwing
deadbolt automatically locks outside paddle.
Auxiliary latch deadlocks latchbolt when door is
locked. Inside paddle is always free for immediate
egress.
HL6-9473 F21 Dormitory/Bedroom Lock
Latchbolt retracted by paddle from either side.
Deadbolt thrown or retracted by key outside or
thumbturn inside.
HL6-9465 Closet/Storeroom Lock
Latchbolt retracted by paddle from either side.
Deadbolt thrown or retracted by key outside.
HL6-9486 L/LV9485 with 09-611 indicator
Adds 09-611 “Do Not Disturb” indicator to L/
LV9485. Specify L583-375 for “Occupied”. NOTE:
This is the “old style” indicator, not the 180 degree
indicator.
* In a double door application where the dummy will be used as the
strike, order 10-091 Armored Front Strike separately.
OCCUPIED
SPECIALTY
280
Price Book 6
Effective July 9, 2018
HL6/PL7/PL8 • Tubular (bored) hospital latch
HL-6
HL6 Push/Pull Latch and
PL7 and PL8 Privacy Function Push/Pull Latch
Note: see page HL-3 for ANSI finish conversion to US nomenclature (e.g., 626= US26D/Satin Chrome)
626 finish defaults to zinc paddles unless specified with ‘B’ (Brass) option. All other finishes use brass
or stainless steel paddles.
Item* Description 626 630 625 629
606
612
605
613
HL6-2 Push/Pull Latch - 2-3/4˝ Backset $337** $387 $414 $410 $397 $423
HL6-3 Push/Pull Latch - 3-3/4˝ Backset 337 387 414 410 397 423
HL6-5 Push/Pull Latch - 5˝ Backset 337** 387 414 410 397 423
HL6-7 Push/Pull Latch - 7" Backset 387 437 464 460 447 473
PL7-2 Push Side Thumbturn - 2-3/4˝ Backset 439 500 522 532 514 534
PL7-3 Push Side Thumbturn - 3-3/4˝ Backset 439 500 522 532 514 534
PL7-5 Push Side Thumbturn - 5˝ Backset 439 500 522 532 514 534
PL8-2 Pull Side Thumbturn - 2-3/4˝ Backset 439 500 522 532 514 534
PL8-3 Pull Side Thumbturn - 3-3/4˝ Backset 439 500 522 532 514 534
PL8-5 Pull Side Thumbturn - 5˝ Backset 439 500 522 532 514 534
PL7-7 Push Side Thumbturn - 7" Backset 489 550 572 582 564 584
PL8-7 Pull Side Thumbturn - 7" Backset 489 550 572 582 564 584
**Note: HL6-2 US26D, HL6-2-A US26D, HL6-5 US26D, and HL6-5-A US26D available in Fast Track and ProXpress
Options and Engraving
Item Description
List
Adjustment
AASA Strike, ANSI 115.1 (1-1/4" x 4-7/8"), when ordered with latch N/C
AS Both Standard & ASA Strikes 29.40
BBrass base material on US26D 54.60
E1-E6 Engraved Push and Pull. (See page HL-8 for ordering guide) 54.60
EN Pull Only Latch -66.20
EO Push Only Latch -66.20
LLead Lining 101.00
SOC Pin-in-Socket Security Screws 29.40
Anti-Microbial Coating
Available on 626 (US26D/Satin Chrome) and 630 (US32D/Satin Stainless Steel) nishes only;
specify nish as 626AM or 630AM $29.40
SPECIALTY
281
Price Book 6
Effective July 9, 2018
HL6 • Mortise Hospital Latch
HL-7
Push/Pull Mortise Lock Combination
• Schlage L Series mortise lock Included.
• Cylinders must be ordered separate†
• See page HL-3 for ANSI finish conversion to US nomenclature (e.g., 626= US26D/Satin Chrome)
• 626 finish defaults to zinc paddles unless specified with ‘B’ (Brass) option. All other finishes use brass or stainless steel paddles
• On functions with cylinders, handles must be mounted in down position on key side or horizontally on both sides.
• On functions with thumbturns, handles must be mounted in the horizontal position
• All units 2-3/4˝ backset
• ASA strike furnished with all units. Bent-tab strike optional
Model* Description 626 605, 606, 612, 613, 625, 630
HL6-9010 Passage Function $931 $971
HL6-9040* Privacy Function 973 1,013
HL6-9050* Ofce/Inner Entry Function 973 1,013
HL6-9060 Apartment Entrance Function 931 971
HL6-9070 Classroom Function 931 971
HL6-9080 Storeroom Function 931 971
HL6-9082 Institution Function 931 971
HL6-9092EL/EU Storeroom Function w/ Electric Locking or Unlocking 1,590 1,630
HL6-9095EL/EU Institution Function w/ Electric Locking or Unlocking 1,590 1,630
HL6-9453* Entrance Function 973 1,013
HL6-9456* Dormitory Exit Function 973 1,013
HL6-9465 Closet/Storeroom Function 973 1,013
HL6-9466 Store/Utility Function 973 1,013
HL6-9473* Dorm Bedroom Function 973 1,013
HL6-9485* Hotel Lock Function 973 1,013
HL6-9486* Hotel Lock Function 973 1,013
HL6-9000RK Mortise paddles only / less mortise lock 400 440
*Thumbturn functions
Options
Item Description
List
Adjustment
B Brass base material on US26D $54.60
BT Bent Tab for Mortise Lock Strike 63.00
E1-E6 Engraved Push and Pull. (See page 18 for ordering guide) 54.60
EN Pull Side Only Latch -153.00
EO Push Side Only Latch -153.00
L Lead Lining 280.00
RX Request to Exit (RX) option for HL6-9092 or HL6-9095 171.00
SOC Pin-in-Socket Security Screws 29.40
†Cylinders
NOTE: Cylinders are not included with mortise push-pull latches and must be ordered separate.
See Schlage PB4 pages CYL-28 (standard cylinder), CYL-33 (FSIC) and CYL-35 (SFIC) for pricing and ordering information
Anti-Microbial Coating
Available on 626 (US26D/Satin Chrome) and 630 (US32/Satin Stainless Steel) nishes only;
specify nish as 626AM or 630AM $29.00
SPECIALTY
282
Price Book 6
Effective July 9, 2018
Engraving Guide
Mounting Position To Order, Specify
Push Up, Pull Down
• Any backset
• Non-handed
E1
Push Up, Pull Up
• Any Backset
• Non-handed
E2
Horizontal Engraving
• Any Backset
• RH
E3
Horizontal Engraving
• Any Backset
• LH
E4
Push Down, Pull Up
• Any Backset
• Non-Handed
E5
Push Down, Pull Down
• Any Backset
• Non-handed
E6
Horizontal Engraving
• 7˝ Backset only
• RH
E4
Horizontal Engraving
• 7˝ Backset only
• LH
E3
Push/Pull Latches
HL-8
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
P
U
S
H
PUSH
P
U
L
L
P
U
S
H
P
U
L
L
PULL
PUSH PULL
P
U
S
H
P
U
L
L
P
U
S
H
P
U
L
L
PUSH PULL
PUSH PULL
PASSAGE
HL6
PASSAGE
HL6
PASSAGE
HL6
PASSAGE
HL6
PASSAGE
HL6
PASSAGE
HL6
PASSAGE
HL6
PASSAGE
HL6
PRIVACY
PL7/PL8
PRIVACY
PL7/PL8
MORTISE
HL6
MORTISE
HL6
MORTISE
HL6
MORTISE
HL6
MORTISE
HL6
MORTISE
HL6
SPECIALTY
283
Price Book 6
Effective July 9, 2018
Parts
HL-9
Part Number Description List
Tubular (Bored) Paddle Assemblies - NON ENGRAVED
(NOTE: additional nishes available upon request. Lever material either brass or stainless steel unless otherwise noted)
HANDLE.10155 HL6 Push Handle Assy, 605/US3/Bright Brass Finish $150.00
HANDLE.10179 HL6 Pull Handle Assy, 605/US3/Bright Brass Finish 150.00
HANDLE.10156 HL6 Push Handle Assy, 606/US4/Satin Brass Finish 139.00
HANDLE.10180 HL6 Pull Handle Assy, 606/US4/Satin Brass Finish 139.00
HANDLE.10157 HL6 Push Handle Assy, 612/US10/Satin Bronze Finish 139.00
HANDLE.10181 HL6 Pull Handle Assy, 612/US10/Satin Bronze Finish 139.00
HANDLE.10158 HL6 Push Handle Assy, 613/US10B/Oil Rubbed Bronze Finish 150.00
HANDLE.10182 HL6 Pull Handle Assy, 613/US10B/Oil Rubbed Bronze Finish 150.00
HANDLE.10159 HL6 Push Handle Assy, 625/US26/Bright Chrome Finish 148.00
HANDLE.10183 HL6 Pull Handle Assy, 625/US26/Bright Chrome Finish 148.00
HANDLE.10160 HL6 Push Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle 122.00
HANDLE.10184 HL6 Pull Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle 122.00
HANDLE.10215 HL6 Push Handle Assy, 626/US26D/Satin Chrome Finish 134.00
HANDLE.10275 HL6 Pull Handle Assy, 626/US26D/Satin Chrome Finish 134.00
HANDLE.10161 HL6 Push Handle Assy, 629/US32/Bright Stainless Steel 144.00
HANDLE.10185 HL6 Pull Handle Assy, 629/US32/Bright Stainless Steel 144.00
HANDLE.10162 HL6 Push Handle Assy, 630/US32D/Satin Stainless Steel 139.00
HANDLE.10186 HL6 Pull Handle Assy, 630/US32D/Satin Stainless Steel 139.00
HANDLE.10225 HL6 Push Handle Eo Assy 626/US26D/Satin Chrome Finish, Zinc Paddle 122.00
HANDLE.10308 HL6 Pull Handle En Assy 626/US26D/Satin Chrome Finish, Zinc Paddle 122.00
HANDLE.10248 HL6 Push Handle Eo Assy 630/US32D/Satin Stainless Steel 135.00
HANDLE.10306 HL6 Pull Handle En Assy 630/US32D/Satin Stainless Steel 135.00
HANDLE.10168 PL7 Push Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle 158.00
HANDLE.10176 PL8 Push Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle 158.00
HANDLE.10192 PL7 Pull Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle 158.00
HANDLE.10200 PL8 Pull Handle Assy, 626/US26D/Satin Chrome Finish, Zinc Paddle 158.00
HANDLE.10170 PL7 Push Handle Assy, 630/US32D/Stainless Steel 180.00
HANDLE.10178 PL8 Push Handle Assy, 630/US32D/Stainless Steel 180.00
HANDLE.10194 PL7 Pull Handle Assy, 630/US32D/Stainless Steel 180.00
HANDLE.10202 PL8 Pull Handle Assy, 630/US32D/Stainless Steel 180.00
Hospital Latch Paddles
Reference diagram below when ordering engraved push/pull paddles
PULL
PUSH PUSH PULL
Engraved Up
Engraved Towards Engraved Away
Engraved Down
SPECIALTY
284
Price Book 6
Effective July 9, 2018
Parts
Part Number Description List
Tubular (Bored) Paddle Assemblies - ENGRAVED
(NOTE: additional nishes and engravings available upon request. Lever material either brass or stainless steel unless otherwise noted)
HANDLE.10211 HL6 Push Handle Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddle $137.00
HANDLE.10212 HL6 Push Handle Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddle 137.00
HANDLE.10213 HL6 Push Handle Assy Engraved Away, 626/US26D/Satin Chrome, Zinc Paddle 137.00
HANDLE.10271 HL6 Pull Handle Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddle 137.00
HANDLE.10272 HL6 Pull Handle Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddle 137.00
HANDLE.10273 HL6 Pull Handle Assy Engraved Towards, 626/US26D/Satin Chrome, Zinc Paddle 137.00
HANDLE.10217 HL6 Push Handle Assy Engraved Down, 626/US26D/Satin Chrome, Brass Paddle 150.00
HANDLE.10254 HL6 Push Handle Assy Engraved Up U,626/US26D/Satin Chrome, Brass Paddle 150.00
HANDLE.10297 HL6 Pull Handle Assy Engraved Down, 626/US26D/Satin Chrome, Brass Paddle 150.00
HANDLE.10277 HL6 Pull Handle Assy Engraved Up, 626/US26D/Satin Chrome, Brass Paddle 150.00
HANDLE.10218 HL6 Push Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10238 HL6 Push Handle Assy Engraved Up, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10219 HL6 Push Handle Assy Engraved Away, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10220 HL6 Push Handle Assy Engraved Toward, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10278 HL6 Pull Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10296 HL6 Pull Handle Assy Engraved Up, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10280 HL6 Pull Handle Assy Engraved Away, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10279 HL6 Pull Handle Assy Engraved Towards, 630/US32D/Satin Stainless Steel 154.00
HANDLE.10262 PL7 Push Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel 195.00
HANDLE.10318 PL7 Pull Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel 195.00
HANDLE.10261 PL8 Push Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel 195.00
HANDLE.10317 PL8 Pull Handle Assy Engraved Down, 630/US32D/Satin Stainless Steel 195.00
Mortise Paddle Assemblies - NON ENGRAVED
(NOTE: additional nishes available upon request. Lever material either brass or stainless steel unless otherwise noted)
HANDLE.10203 HL6 Push Handle Mortise Assy, 605/US3/Bright Brass $150.00
HANDLE.10264 HL6 Pull Handle Mortise Assy, 605/US3/Bright Brass 150.00
HANDLE.10205 HL6 Push Handle Mortise Assy, 612/US10/Satin Bronze 139.00
HANDLE.10266 HL6 Pull Handle Mortise Assy, 612/US10/Satin Bronze 139.00
HANDLE.10206 HL6 Push Handle Mortise Assy, 613/US10B/Oil Rubbed Bronze 150.00
HANDLE.10267 HL6 Pull Handle Mortise Assy, 613/US10B/Oil Rubbed Bronze 150.00
HANDLE.10207 HL6 Push Handle Mortise Assy, 625/US26/Bright Chrome 148.00
HANDLE.10268 HL6 Pull Handle Mortise Assy, 625/US26/Bright Chrome 148.00
HANDLE.10208 HL6 Push Handle Mortise Assy, 626/US26D/Satin Chrome, Zinc Paddles 122.00
HANDLE.10269 HL6 Pull Handle Mortise Assy, 626/US26D/Satin Chrome, Zinc Paddles 122.00
HANDLE.10229 HL6 Push Handle Mortise Assy, 626/US26D/Satin Chrome 134.00
HANDLE.10289 HL6 Pull Handle Mortise Assy,626/US26D/Sating Chrome 134.00
HANDLE.10209 HL6 Push Handle Mortise Assy, 630/US32D/Stainless Steel 139.00
HANDLE.10270 HL6 Pull Handle Mortise Assy, 630/US32D/Stainless Steel 139.00
Hospital Latch Paddles (continued)
HL-10
SPECIALTY
285
Price Book 6
Effective July 9, 2018
COVER ASSEMBLIES
(NOTE: additional nishes available upon request)
840964-03 HL6 Cover, 605/US3/Bright Brass $86.10
840964-04 HL6 Cover, 606/US4/Satin Brass 77.70
840964725 HL6 Cover, 612/US10/Satin Bronze 77.70
840964-13 HL6 Cover, 613/US10B/Oil Rubbed Bronze 86.10
840964-25 HL6 Cover, 625/US26/Bright Chrome 86.10
840967-64 HL6 Cover, 626/US26D/Satin Chrome, Zinc 68.30
840964-26 HL6 Cover, 626/US26D/Satin Chrome 77.70
840965-31 HL6 Cover, 629/US32/Bright Stainless Steel 81.90
840965-32 HL6 Cover, 630/US32D/Satin Stainless Steel 77.70
840956-04 PL7/PL8 Coin Turn Cover Assy, 605/US4/Bright Brass 110.00
840956-25 PL7/PL8 Coin Turn Cover Assy, 625/US26/Bright Chrome 122.00
840956-26 PL7/PL8 Coin Turn Cover Assy, 626/US26D/Satin Chrome 111.00
840956-32 PL7/PL8 Coin Turn Cover Assy, 630/US32D/Satin Stainless Steel 117.00
840957-04 PL7/PL8 Thumbturn Cover Assy, 605/US4/Bright Brass 190.00
840957-25 PL7/PL8 Thumbturn Cover Assy, 625/US26/Bright Chrome 196.00
840957-26 PL7/PL8 Thumbturn Cover Assy, 626/US26D/Satin Chrome 180.00
840957-32 PL7/PL8 Thumbturn Cover Assy, 630/US32D/Satin Stainless Steel 190.00
STRIKES
(NOTE: additional nishes available upon request)
890023-03 Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 605/US3/Bright Brass $29.40
890023-04 Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 606/US4/Satin Brass 29.40
890023-06 Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 612/US10/Satin Bronze 29.40
890023-13 Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 613/US10B/Oil Rubbed Bronze 29.40
890023-32 Standard Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 625/626/629/630/US26/US26D/US32/US32D 29.40
890022-03 Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 605/US3/Bright Brass 29.40
890022-04 Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 606/US4/Satin Brass 29.40
890022-06 Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 612/US10/Satin Bronze 29.40
890022-13 Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 613/US10B/Oil Rubbed Bronze 29.40
890022-32 Asa Strike, HL6/PL7/PL7 Tubular (Bored) Lock, 625/626/629/630/US26/US26D/US32/US32D 29.40
Part Number Description List
Mortise Paddle Assemblies - ENGRAVED
(NOTE: additional nishes and engravings available upon request. Lever material either brass or stainless steel unless otherwise noted)
HANDLE.10236 HL6 Push Handle Mortise Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddles $137.00
HANDLE.10230 HL6 Push Handle Mortise Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddles 137.00
HANDLE.10226 HL6 Push Handle Mortise Assy Engraved Away, 626/US26D/Satin Chrome, Zinc Paddles 137.00
HANDLE.10290 HL6 Pull Handle Mortise Assy Engraved Down, 626/US26D/Satin Chrome, Zinc Paddles 137.00
HANDLE.10298 HL6 Pull Handle Mortise Assy Engraved Up, 626/US26D/Satin Chrome, Zinc Paddles 137.00
HANDLE.10286 HL6 Pull Handle Mortise Assy Engraved Towards, 626/US26D/Satin Chrome, Zinc Paddles 137.00
HANDLE.10325 HL6 Push Handle Mortise Assy Engraved Up, 626/US26D/Satin Chrome 150.00
HANDLE.10326 HL6 Pull Handle Mortise Assy Engraved Down, 626/US26D/Satin Chrome 150.00
HANDLE.10221 HL6 Push Handle Mortise Assy Engraved Down, 630/US32D/Stainless Steel 154.00
HANDLE.10243 HL6 Push Handle Mortise Assy Engraved Up, 630/US32D/Stainless Steel 154.00
HANDLE.10222 HL6 Push Handle Mortise Assy Engraved Towards, 630/US32D/Stainless Steel 154.00
HANDLE.10231 HL6 Push Handle Mortise Assy Engraved Away, 630/US32D/Stainless Steel 154.00
HANDLE.10285 HL6 Pull Handle Mortise Assy Engraved Down, 630/US32D/Stainless Steel 154.00
HANDLE.10281 HL6 Pull Handle Mortise Assy Engraved Up, 630/US32D/Stainless Steel 154.00
HANDLE.10291 HL6 Pull Handle Mortise Assy Engraved Towards, 630/US32D/Stainless Steel 154.00
HANDLE.10282 HL6 Pull Handle Mortise Assy Engraved Away, 630/US32D/Stainless Steel 154.00
Hospital Latch Paddles (continued)
Parts
HL-11
SPECIALTY
286
Price Book 6
Effective July 9, 2018
Parts
Part Number Description List
LATCHBOLTS
(NOTE: additional nishes available upon request)
800108-03 HL6/PL7pl8 2.75" Latchbolt Pkg 605/US3/Bright Brass $52.50
800108-04 HL6/PL7pl8 2.75" Latchbolt Pkg 606/US4/Satin Brass 52.50
800108-06 HL6/PL7pl8 2.75" Latchbolt Pkg 612/US10/Satin Bronze 52.50
800108-13 HL6/PL7pl8 2.75" Latchbolt Pkg 613/US10B/Oil Rubbed Bronze 52.50
800108-25 HL6/PL7pl8 2.75" Latchbolt Pkg 625/629/US26/US32 52.50
800108-26 HL6/PL7pl8 2.75" Latchbolt Pkg 626/630/US26D/US32D 52.50
800109-25 HL6/PL7pl8 3.75" Latchbolt Pkg 625/629/US26/US32 54.60
800109-26 HL6/PL7pl8 3.75" Latchbolt Pkg 626/630/US26D/US32D 54.60
800110-03 HL6/PL7pl8 5.0" Latchbolt Pkg 605/US3/Bright Brass 55.70
800110-04 HL6/PL7pl8 5.0" Latchbolt Pkg 606/US4/Satin Brass 55.70
800110-06 HL6/PL7pl8 5.0" Latchbolt Pkg 612/US10/Satin Bronze 55.70
800110-13 HL6/PL7pl8 5.0" Latchbolt Pkg 613/US10B/Oil Rubbed Bronze 55.70
800110-25 HL6/PL7pl8 5.0" Latchbolt Pkg 625/629/US26/US32 55.70
800110-26 HL6/PL7pl8 5.0" Latchbolt Pkg 626/630/US26D/US32D 55.70
800111-06 HL6/PL7pl8 7.0" Latchbolt Pkg 612/US10/Satin Bronze 109.00
800111-26 HL6/PL7pl8 7.0" Latchbolt Pkg 626/630/US26D/US32D 109.00
LEAD LINING
823150-00 HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 2 3/4" Backset $101.00
821015-00 HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 3 3/4" Backset 101.00
823148-00 HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 5" Backset 101.00
821014-00 HL6/PL7/PL8 Tubular (Bored) Lock Lead Lining, for use with 7" Backset 101.00
SCREW PACKS
840960-04 HL6/PL7/PL8 Screw Pkg 606/US4/Satin Brass $10.50
840960-06 HL6/PL7/PL8 Screw Pkg 612/US10/Satin Bronze 10.50
840960-13 HL6/PL7/PL8 Screw Pkg 613/US10B/Oil Rubbed Bronze 10.50
840960-26 HL6/PL7/PL8 Screw Pkg 625/626/US26/US26D 10.50
840960-32 HL6/PL7/PL8 Screw Pkg 629/630/US32/US32D 10.50
840613-00 HL6/PL7/8 Security Screw Pkg 3, 2D 10.50
829632-26 HL6eo Screw Pkg 625/626/US26/US26D 10.50
HLPART.10158 HL6/HL6M/PL7/PL8 Spring & Rivet Pkg 13.70
HLPART.10159 “OLD STYLE” SPRING & RIVET PKG 13.70
MORTISE LOCK COMPONENTS
840088-00 HLM6 Mounting Plate $2.60
Strikes See page L-35
Armor fronts See page L-35
Chassis See page L-39
36-371-89 EL/EU SPINDLE (Qty 1) $1.00
Hospital Latch Paddles (continued)
HL-12
Portable Security
287
Price Book 6
Effective July 9, 2018
Portable Security
Conventional Key-in-Lever Small Format Interchangeable Core
Dust cover screws
Dust cover
Cylinder housing
Cylinder
Lock head
Washer
Throw member
mounting screw
Driver
mounting screw
Driver
Throw member
Bumper
Lock Body
Lock Body
KS-Series Cable
Conventional Key-in-Lever Small Format Interchangeable Core
KS-Series Padlock Parts
PS-1
Portable Security
288
Price Book 6
Effective July 9, 2018
PS-2
Portable Security
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Keyed different products ship with Key in Knob keyed different cylinders only. For other Key in Knob cylinder options order less cylinder
padlocks from page PS-6 and cylinders separately.
3. For Custom Engraving, see page PS-9.
4. Key in Knob less cylinder padlocks ship with key stop, cylinder housing, and cylinder housing screw.
5. For cylinder and keying options, refer to Cylinders and Keys & Keying sections.
6. SFIC less cylinder product is shipped without cylinder.
7. Padlocks with cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Important Portable Security Ordering Information
All products in this section are stocked and must be ordered in case quantities. Case quantity is listed with each
product. All prices listed are unit prices.
Note: Keyed different products ship with key in knob cylinders.
All cylinders ordered for use with Less Cylinder products will ship separately.
Portable Security
289
Price Book 6
Effective July 9, 2018
PS-3
Introduction Portable Security
Standard Features for Commercial Series Padlocks
Certification Meets or exceeds ASTM standards for standard steel shackle, shackle cutting and
corrosion resistance
Lock Body Solid steel, brass and chrome plated brass - Solid steel resists impact, solid brass and
chrome plated brass resist corrosion
Shackle Hardened alloy steel, double deadbolt locking mechanism
Cylinder* Conventional Key-In-Lever, 6-pin solid brass, pinned 5, C keyway, keyed different (KD) unless
otherwise specified
Cylinder Finish 606 Satin Brass
Keys Two nickel silver cut keys per lock, branded Schlage
* Cylinders must be ordered as a separate line item for all products except conventional key in lever KD stocked.
Standard Features for Commercial Series Cables
Lock Head Die-cast zinc, 407 satin finish
Cable Braided steel vinyl coated for greater cut resistance than twisted cables
Cylinder* Conventional Key-In-Lever , 6-pin solid brass, pinned 5, C keyway, keyed different (KD)
Cylinder Finish 606 Satin Brass
Keys Two nickel silver cut keys per lock, branded Schlage
* Cylinders must be ordered as a separate line item for all products except conventional key in lever KD stocked.
Standard Features for Commercial Series Chains
Certification Padlock meets or exceeds ASTM standards for tensile force, shock, shackle cutting,
cycle test and corrosion
Padlock* Recommended for use with KS72F2300 - Round style padlock with 2” shackle
Lock Body 2 5/8” Solid steel resists impact
Shackle Molybdenum hardened steel, patented interchangeable design, double deadbolt locking mechanism
Cylinder Conventional Key-In-Lever , 6-pin solid brass, pinned 5, C keyway, keyed different (KD)
Cylinder Finish 606 Satin Brass
Keys Two nickel silver cut keys per lock, branded Schlage
Chain Triple heat treated Boron Manganese steel; unique six-sided chain links resist attack
* Padlocks and chains must be ordered separately.
Table of Contents
PL Series Cross Reference ........................................................................................... PS-4
Key-In-Knob with Cylinder ......................................................................................... PS-5
Keyed Different ............................................................................................................. PS-5
Chain Only .................................................................................................................. PS-5
Key-In-Knob Less Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS-6
SFIC Less Cylinder ...................................................................................................PS-7
Full Size IC Core .................................................................................................... PS-8
Less Cylinder - Brass ........................................................................................................PS-8
Custom Engraving Brass Padlocks and Chrome Plated Brass Padlocks .............................................. PS-9
Parts and Accessories ............................................................................................. PS-10
Specialty Security ..................................................................................................PS-13
Flex Security .......................................................................................................PS-14
Padlocks ....................................................................................................................PS-14
Security Chains .............................................................................................................PS-15
Security Cables and Locking Cables .........................................................................................PS-15
Portable Security
290
Price Book 6
Effective July 9, 2018
PS-4
PL Series - Discontinued
Body Size Shackle Dimension Shackle Dimension (metric)
Part # Width Height Depth A B C A B C
Cylinder
Type
PL1001J
1 3/4” 2 1/8” 3/4” 5/16”
1 1/8”
3/4” 8mm
29mm
19mm KNKPL1002J 2” 51mm
PL1003J 3” 76mm
PL2001J
2” 2 1/8” 3 /4” 3/8”
1 1/8”
3/4” 9.5mm
29mm
19mm KNKPL2002J 2” 51mm
PL2003J 3” 76mm
PL3001J 2 1/4” 2 3/8” 7/8” 7/16” 1 1/8” 5/16” 11mm 29mm 24mm KNK
PL3002J 2” 51mm
PL4001J
2” 2 1/4” 7/8” 3/8”
1 1/8”
3/4” 9.5mm
29mm
19mm ICPL4002J 2” 51mm
PL4003J 3” 76mm
KS Series - Replacement
Body Size Shackle Dimension Shackle Dimension (metric)
Part # Width Height Depth A B C A B C
Cylinder
Type
KS23D2200 1 25/32” 2 3/16” 7/8” 5/16” 1 1/2” 3/4” 8mm 38mm 19mm KNK
KS23F2200 2” 51mm
KS43D2200 1 15/16” 2 3/16” 7/8” 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm KNK
KS43F2200 2” 51mm
KS43D3200 1 15/16” 2 3/16” 7/8” 3/8” 1 1/2” 3/4” 9.5mm 38mm 19mm IC
KS43F3200 2” 51mm
NOTES: 1) Padlocks must be ordered and are shipped less cylinder
– Keys & Keying must appear as a separate line item
2) Reference Schlage Keys & Keying section for specific opitions and cylinders
– All Key & Keying adders and deducts apply
3) Key retaining cams for Classic KNK padlocks - KZ32CB1 - ordered as separate line item and ships separately
4) Key retaining is not an option on Full Size IC products
Portable Security • PL Series Cross Reference
PL Part #/KS Part #
PL Series Part # KS Series Part #
PL1001J KS23D2200
PL1002J KS23F2200
PL1003J KS23F2200
PL2001J KS43D2200
PL2002J KS43F2200
PL2003J KS43F2200
PL3001J KS43D2200
PL3002J KS43F2200
PL4001J KS43D3200
PL4002J KS43F3200
PL4003J KS43F3200
Shackle Dimensions
Portable Security
291
Price Book 6
Effective July 9, 2018
PS-5
Shackle Dimensions
Body Size Shackle
Dimension
Shackle
Dimension (metric)
UPC
720018- Part # Width Height Depth A B C A B C Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
KEYED DIFFERENT - BRASS
997412 KS23D2300 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm KNK 6 24 $62.60
997405 KS23F2300 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNK 6 24 62.80
997290 KS43D2300 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm KNK 6 24 66.60
997283 KS43F2300 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNK 6 24 67.00
KEYED DIFFERENT - STEEL
997764 KS72F2300 2 5/8" 2 3/8" 1 3/32" 7/16" 2" 7/8" 11mm 51mm 22mm KNK 6 18 $72.10
Cable Size Cable Size (metric)
UPC
720018- Part # Length Diameter Length Diameter Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
KEYED DIFFERENT
997719 KC215E220 6' 5/8" 182cm 15mm KNK 1 5 $96.70
Chain Size Chain Size
(metric) Shackle Dimension ShackleShackle
Dimension (metric)
UPC
720018- Part # Length Length A B C A B C Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
CHAIN ONLY
999478 999478 5' 150 cm N/A N/A N/A 1 1 $94.00
999461 999461 3' 3" 100 cm N/A N/A N/A 1 1 49.70
20 Series
3/4” 1 1/2” 2“ 4“
KS23D
40 Series
3/4” 1 1/2” 2“ 4“
KS43F
Keyed Different - Key-In-Lever Key-in-Lever with Cylinder • Portable Security
Round Series
2” 1”
KS72F KC Series KK Series
Available in:
606 Brass
Available in:
652 Steel
Locking Head is
407 Satin Finish
Padlock is 652 Steel
NOTE: 1) For master keyed or keyed alike products, order chain, padlocks and cylinders separately.
Order chains #999478 or #999461 with padlock KS72F2300.
Prices are for chains only.
Chains and Padlocks must be ordered separately.
Portable Security
292
PS-6
Key-In-Lever
Less Cylinder
20 Series
3/4” 1 1/2” 2“ 4“
KS23D
40 Series
3/4” 1 1/2” 2“ 4“
KS43F
Available in 606 Brass
Portable Security • Key-in-Lever Less Cylinder
Body Size Shackle
Dimension
Shackle
Dimension (metric)
UPC
720018- Part # Width Height Depth A B C A B C Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
LESS CYLINDER - BRASS
000259 KS23D2200 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm KNK 6 24 $52.20
000266 KS23F2200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm KNK 6 24 52.50
000297 KS43D2200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm KNK 6 24 56.20
000303 KS43F2200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm KNK 6 24 56.50
Price Book 6
Effective July 9, 2018
Portable Security
293
PS-7
20 Series
3/4” 1 1/2” 2“ 4“
KS21F KC Series
20 Series
3/4” 1 1/2” 2“ 4“
KS23D
Available in 625
Chrome Plated Brass
Locking Head is
407 Satin Finish
Less Cylinder - SFIC SFIC - Less Cylinder • Portable Security
Body Size Shackle
Dimension
Shackle
Dimension (metric)
UPC
720018- Part # Width Height Depth A B C A B C Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
LESS CYLINDER - CHROME PLATED BRASS
997658 KS11D1200 1 25/32" 2 3/16" 7/8" 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm SFIC 6 24 $31.10
997641 KS11F1200 1 25/32" 2 3/16" 7/8˝ 1 /4" 2" 3/4" 6.4mm 51mm 19mm SFIC 6 24 32.50
997498 KS21D1200 1 25/32" 2 3/16" 7/8" 5/16" 1 1/2" 3/4" 8mm 38mm 19mm SFIC 6 24 33.00
997481 KS21F1200 1 25/32" 2 3/16" 7/8" 5/16" 2" 3/4" 8mm 51mm 19mm SFIC 6 24 34.60
997375 KS41D1200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3 /4" 9.5mm 38mm 19mm SFIC 6 24 33.00
997368 KS41F1200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm SFIC 6 24 34.60
Cable Size Cable Size (metric)
UPC
720018- Part # Length Diameter Length Diameter Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
LESS CYLINDER - SMALL FORMAT INTERCHANGEABLE CORE
998747 KC215A130 2' 5/8" 60cm 15mm SFIC 1 5 $62.60
998754 KC215B130 4' 5/8" 121cm 15mm SFIC 1 5 67.00
Price Book 6
Effective July 9, 2018
Portable Security
294
Price Book 6
Effective July 9, 2018
PS-8
40 Series
3/4” 1 1/2” 2“ 4“
KS43F
40 Series
3/4” 1 1/2” 2“ 4“
KS43D
Available in 606 Brass
Less Cylinder - IC Core
Portable Security • Full Size IC Core
Body Size Shackle
Dimension
Shackle
Dimension (metric)
UPC
720018- Part # Width Height Depth A B C A B C Cylinder
Type
Case
Pack
Master
Pack
List Price
Each
LESS CYLINDER - BRASS
999140 KS43D3200 1 15/16" 2 3/16" 7/8" 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm IC 6 24 $64.80
999157 KS43F3200 1 15/16" 2 3/16" 7/8" 3/8" 2" 3/4" 9.5mm 51mm 19mm IC 6 24 68.60
Portable Security
295
Price Book 6
Effective July 9, 2018
PS-9
Custom engraving is available on the following parts.
Brass Padlocks - Listed on page
KS23D2300
PS-5
KS23F2300
KS43D2300
KS43F2300
KS23D2200
PS-6
KS23F2200
KS43D2200
KS43F2200
KS43D3200 PS-8
KS43F3200
Chrome Plated Brass Padlocks - Listed on page
KS11D1200
PS-7
KS11F1200
KS21D1200
KS21F1200
KS41D1200
KS41F1200
NOTES: 1) A one time set up cost of $85 net will be added to the first order under part number 50-020.
2) A $8.00 net per piece engraving fee will be added to net product cost.
3) Custom engraving requires submission of completed “Custom Logo Request” form (see Forms)
and scaleable logo line art in DXF format to LOCKSUPPORT@ALLEGION.COM.
4) Minimum order quantity is 6.
5) XKS-000-XXX part number is assigned by Technical Services and
is keyed in the accessory field as part of the product part number.
Custom Engraving - Optional
KSxxxxx XKS-000-xxx
CLR Assigned Number per Technical Services
Brass Padlock/Chrome Plated Brass Padlock Stock
Locking Cables, Security Chains and Padlocks • Portable Security
Portable Security
296
Price Book 6
Effective July 9, 2018
PS-10
KIT FEATURES & SPECIFICATIONS
• Must be ordered in box quantity
• Replacement parts and accessories discounted at full lock discount
Portable Security • Stocked Parts and Accessories
UPC
720018- Part # Description
Box
Quantity
Carton
Quantity
List
Price
Each
SERVICE REPAIR KIT - PADLOCK & CABLES - CONVENTIONAL KEY-IN-LEVER & SFIC
997818 KZ390AL Service Repair Kit — Includes 10 of each part below except KZ35AC1, KZ35AC2, KZ36EB0 -
Qty 20; KZ37000 - Qty 1 and also includes pliers
1 6 $468.00
PADLOCK PARTS - CONVENTIONAL KEY-IN-LEVER
998204 KZ32CB1 Key Retaining Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $2.40
997788 KZ32DA0 Driver 30 240 2.40
PADLOCK PARTS - SFIC
998259 KZ31CB1 Key Retaining Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $1.50
998303 KZ31DA0 Throw Member 30 240 2.80
ACCESSORIES
997900* KZ200AL 9” Nickel Plated Steel Retaining Chain 6 36 $8.10
* Fits shackles diameters 1/4” - 3/8”.
Portable Security
297
Price Book 6
Effective July 9, 2018
PS-11
40 Series Shackles
3/4” 1 1/2” 2“ 4“
40 Series Shackles
3/4” 1 1/2” 2“ 4“
3/8” x 3/4” 5/16” x 2” 1/4” x 4”
40 Series Shackles
3/4” 1 1/2” 2“ 4“
FEATURES & SPECIFICATIONS
• Parts and Accessories discounted at full lock discount.
• Must be ordered in box quantity.
Parts and Accessories • Portable Security
Shackle
Dimension
Shackle
Dimension (metric)
UPC
720018- Part # A B C A B C Box
Quantity
Carton
Quantity
List Price
Each
HARDENED STEEL SHACKLES - FOR USE WITH 10 SERIES PADLOCKS
997214 KZ11A10 1/4" 3/4" 3 /4" 6.4mm 19mm 19mm 6 36 $5.20
997184 KZ11D10 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm 6 36 6.40
997153 KZ11F10 1/4" 2" 3/4" 6.4mm 51mm 19mm 6 36 6.50
997122 KZ11G10 1/4" 4" 3/4" 6.4mm 102mm 19mm 6 36 9.10
HARDENED STEEL SHACKLES - FOR USE WITH 20 SERIES PADLOCKS
997177 KZ11D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 $8.00
997115 KZ11G20 5/16" 4" 3/4" 8mm 102mm 19mm 6 36 11.60
HARDENED STEEL SHACKLES - FOR USE WITH 40 SERIES PADLOCKS
997139 KZ11F40 3/8" 2" 3/4" 9.5mm 51mm 19mm 6 36 $10.30
997108 KZ11G40 3/8" 4" 3/4" 9.5mm 102mm 19mm 6 36 14.20
BRASS SHACKLES - FOR USE WITH 10 SERIES PADLOCKS
997061 KZ12D10 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm 6 36 $6.40
997009 KZ12G10 1/4" 4" 3/4" 6.4mm 102mm 19mm 6 36 9.10
BRASS SHACKLES - FOR USE WITH 20 SERIES PADLOCKS
997054 KZ12D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 $7.50
996996 KZ12G20 5/16" 4" 3/4" 8mm 102mm 19mm 6 36 $11.50
BRASS SHACKLES - FOR USE WITH 40 SERIES PADLOCKS
997047 KZ12D40 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm 6 36 $10.00
996989 KZ12G40 3/8" 4" 3/4" 9.5mm 102mm 19mm 6 36 14.20
STAINLESS STEEL SHACKLES - FOR USE WITH 10 SERIES PADLOCKS
001270 KZ13D10 1/4" 1 1/2" 3/4" 6.4mm 38mm 19mm 6 36 $6.00
001287 KZ13F10 1/4" 2" 3/4" 6.4mm 51mm 19mm 6 36 6.40
STAINLESS STEEL SHACKLES - FOR USE WITH 20 SERIES PADLOCKS
001294 KZ13D20 5/16" 1 1/2" 3/4" 8mm 38mm 19mm 6 36 $8.00
001300 KZ13F20 5/16" 2" 3/4" 8mm 51mm 19mm 6 36 8.30
STAINLESS STEEL SHACKLES - FOR USE WITH 40 SERIES PADLOCKS
001317 KZ13D40 3/8" 1 1/2" 3/4" 9.5mm 38mm 19mm 6 36 $10.00
001324 KZ13F40 3/8" 2" 3/4" 9.5mm 51mm 19mm 6 36 10.30
Portable Security
298
Price Book 6
Effective July 9, 2018
PS-12
Replacement Parts
Portable Security • Parts and Accessories
UPC
720018- Part # Description
Box
Quantity
Carton
Quantity
List
Price
Each
PADLOCK PARTS - CONVENTIONAL KEY-IN-LEVER & SFIC
997801 KZ35AA1 Shackle Spring, 10 Series 30 240 $0.52
997795 KZ35AA2 Shackle Spring, 20, 80 Series 30 240 0.52
996972 KZ35AA3 Shackle Spring, 40, 90 Series 30 240 0.52
997894 KZ35AC1 Locking Ball Bearing, 10, 20, 40, 80, 90 Series 30 240 1.20
PADLOCK PARTS - CONVENTIONAL KEY-IN-LEVER
998167 KZ32BB0 Cylinder Housing Screw 30 240 $1.20
998174 KZ32CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 2.40
PADLOCK & CABLE PARTS - CONVENTIONAL KEY-IN-LEVER
998143 KZ38BA1* Cylinder Housing, 20, 40, 70, 80, 90, KC Series 20 160 $8.50
PADLOCK PARTS - SFIC
998235 KZ31CA1 Locking Cam, 10, 20, 40, 80, 90 Series 30 240 $2.40
998259 KZ31CB1 Key Retaining Locking Cam, SFIC, 10, 20, 40, 80, 90 Series 30 240 1.50
998273 KZ31CC1 Steel Retainer Plate, 10, 20, 40, 80, 90 Series 30 240 1.50
998297 KZ31CD0 Steel Retainer Plate Screw 30 240 1.80
998433 KZ37000 Installation Tool 6 36 3.60
CABLE PARTS
998365 KZ34DA0 Driver, Key-In-Lever 30 240 $2.60
*Cable series can use either Cylinder Housing part KZ38BA1 or KZ38BA2.
FEATURES & SPECIFICATIONS
• Must be ordered in box quantity
• Replacement parts and accessories discounted at full lock discount
• While supplies last
Portable Security
299
Price Book 6
Effective July 9, 2018
PS-13
Hasps Special Security • Auxiliary Products
855101 855118 855125
994848
Specialty Security Products
HASPS - HIGH-SECURITY
UPC Part Number Description Body Dimension
Carton
Quantity
List Price
Each
855101 855101 Vehicle or Gate Security Hasp 8-1/2" x 4-1/2" 3 $39.20
855118 855118 Flexible Double-Hinge Steel Security Hasp 7-3/4" x 1-3/4" 6 12.50
855125 855125 Center Hole Security Hasp 5" x 2" 6 11.90
HASP - MODERATE-SECURITY
994848 994848 Steel Bar Hasp 4-1/2" x 1-5/8" 6 $6.40
Price Book 6
Effective July 9, 2018
300
Portable Security
Padlocks
Flex Security • Portable Security
999232 855156
Shackle Dimensions
FLEX SECURITY FEATURES & SPECIFICATIONS
• Non rekeyable
• Retail vis-packed
• Must be ordered in case quantity multiples
850410
Special Use Padlocks
UPC Part Number Shackle Dimension Shackle Dimension (metric) Padlock
Width
Case
Qty
Price
Each
A B C A B C
Extra Large Padlock
720018999232 999232 1/2" 11" 4" 12mm 275mm 102mm 7 1/4" 5$38.00
Shackle-less Padlock
720018855156 855156 – – – – – – 2 7/8" 6$47.60
Covered Laminated Steel Padlocks
UPC Part Number Shackle Dimension Padlock
Width
Case
Qty
Price
Each
A B C
Covered Laminated Steel Padlocks
720018850410* 850410* 1 /4" 1 1/8" 3/4" 1 1/2" 3$26.20
* 2 KA units per pack. 6 Packs keyed different per case.
PS-14
Price Book 6
Effective July 9, 2018
Portable Security
301
Security Chains,
Security Cables & Locking Cables Flex Security • Portable Security
Loop Dimensions
820406 999263
999270 999249
999256
999218 999225 994800
994862
Link Dimensions
999461
999478 999201
FLEX SECURITY
FEATURES &
SPECIFICATIONS
• Non rekeyable
• Retail vis-packed
• Must be ordered in
case quantity multiples
Security Chains
UPC Part Number Shackle Dimension Chain
Length
Case
Qty
Price
Each
A
Cinch Ring Security Chains
720018999478 999478 1/2" 5’ 1 $94.00
720018999461 999461 1/2" 3’ 3" 149.70
Security Cables and Locking Cables
UPC Part Number Cable Dia. Loop Dimension Cable
Length
Case
Qty
Price
Each
A B C
Heavy Duty Locking Cable - Schlage Rekeyable
720018999201 999201 5/8" – – 6’ 5$70.00
Heavy Duty Flexible Steel Cables
720018820406 820406 5/8" 3 3/8" 1 5/8" 7’ 5$43.00
Flexible Steel Cables
720018999270 999270 3/8" 2 1/4" 1 1/8" 30’ 4 $55.00
720018999263 999263 3/8" 2 1/4" 1 1/8" 15’ 4 34.20
720018999256 999256 3/8" 2 1/4" 1 1/8" 7’ 420.20
720018999249 999249 3/8" 2 1/4" 1 1/8" 4’ 415.80
Key Cable
720018999218 999218 1/2" – – 5’ 4 $29.00
Resettable Combination Cable
720018999225 999225 3/8" – – 5’ 4 $30.10
Flexible Steel Cable and Covered Laminated Steel Padlock
720018994800 994800 3/8" 2 1/4" 1 1/8" 4’ 4$27.20
720018994862 994862 3/8" 2 1/4" 1 1/8" 15’ 4 42.70
PS-15
Portable Security
302
Price Book 6
Effective July 9, 2018
PS-16
Notes
Portable Security • Flex Security
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
303
Price Book 6
Effective July 9, 2018
Shell
Tailpiece
Retainer cap
Retainer cap pin
Retainer cap pin spring
Springs
T
op pins
Master pins
Bottom pins
Key
Plug
Undercut groove
Cylinders
Expl
oded View - Everest Key-in-Knob/Lever Cylinder
CYLINDERS
CYL-1
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
304
Price Book 6
Effective July 9, 2018
CYLINDERS
Ordering Procedures
To order Schlage products, descriptive data should be in the same sequence as shown below.
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 10 20-001 S125 626 118
CYL-2
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1 ¾" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders. See
Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with “C” keyway and KD or 0-bitted will receive 6 pin cylinders.
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Conventional standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the
order will be entered as 0-bitted.
15. Available plug face nishes are 606 and 626, 643e, 622. For brass or satin bronze nish colors, the plug face nish is 606. For oil rubbed or
aged bronze nish colors, the 643e plug face will be furnished. For chrome, nickel or stainless steel nish colors, the plug face nish is 626.
16. Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $16.40 per cylinder.
17. For hotel function cylinders: Not available in Primus. Furnished 0-bitted. Emergency keys must be ordered separately.
18. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
Line Item: Line item number
Qty: Quantity
Product: Product number + keyway
Outside Des: Not Applicable
Outside Fin: Cylinder face nish color (for Key in Lever cylinders, choose plug face color - 606 or 626)
Inside Des: Not Applicable
Inside Fin: Not Applicable
Hand: Not Applicable
Latch: Not Applicable
Strike: Not Applicable
Dr Thk: Not Applicable
Ext: Not Applicable
Dim: for mortise cylinder length (Written as 1 1/8" = 118, 1 3/4" - 134 etc.)
Additional
Details: Keying instructions (KA, KD, 0-bitted), Primus XP #, Everest 29 Facility Code, Locksmith ID#, Additional stamping instructions
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
305
Price Book 6
Effective July 9, 2018
CYL-3
CYLINDERS
Introduction
Product Identification
20-001 118 XXXX
Keyway
Dimension
Cylinder Assembly
Full Size Cylinders and Cores
When ordering full size cylinders, specify the standard or Primus cyl-
inder number, dimension (where required),
keyway (e.g. C, CP, C123, S123 etc ) or keyway family
(e.g. Obverse, Everest® Family, Everest D Family,
Everest 29 T) and finish. If no keyway is specified,
master keyed products will default to Everest 29 S145 and
non-master keyed products will default to S123.
Small Format Interchangeable Cores
Small format cores are available only in Everest and Everest 29
restricted keyways and certain Best® keyways. Small format cores
cannot be keyed into the same system as full size cylinders and
cores because the keyways are different.
See Schlage Cylinder & Keyway Terminology for more details
on Schlage’s terminology.
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
606 (US 4) Satin Brass
609 (US 5) Antique Brass
612 (US 10) Satin Bronze
613 (US 10B) Oil Rubbed Bronze
619 (US 15) Satin Nickel
622 (US 19) Matte Black
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
629 (US 32) Bright Stainless Steel
630 (US 32D) Satin Stainless Steel
643e (US11) Aged Bronze
Standard Features*
Certification BHMA certified to ANSI A156.5, 2001, Grade 1 Operational
Key Patents Primus XP keys are protected against unauthorized duplication by U S utility patents 7 159 424 Everest and Everest Primus
XP keys are protected by U S design patents 428,324 and 426,452. Everest 29 and Everest 29 Primus XP keys are protected
by U S patent US 7,665,337
Standard Solid Brass 6 pin plugs and shells. Mortise and Rim cylinders utilize a two piece Stainless Steel sintered housing secured by
Cylinder 2 Torx® screws. Standard keyway is Everest 29 S123, furnished Keyed Different (KD) with two 6 pin nickel silver keys
(except F series knobs and levers). Mortise cylinder standard lengths are 1 1/8" for conventional cylinders, 1 1/2" for large
format interchangeable core and 1 3/8" for small format interchangeable core.
SFIC Everest 29 R and Everest B combinated cores includes 2 change keys. Small format cores are available
either uncombinated or combinated. Control keys must be ordered separately.
FSIC Full size standard pinned cores are furnished 1-bitted. Primus cores are furnished 0-bitted. Primus
Primus XP cylinders are furnished MK, KA, KD, or Less Key Blank (LKB). See Terms & Conditions: Primus Sales Policy for
additional details.
Conventional standard pinned cylinders: Available 0-Bitted. 1-Bitted is not available and if specified, 0-bitted will be furnished.
Standard pinned FSIC cylinders: Furnished 1-bitted. 0-Bitted is not available and if specified, 1-bitted will be furnished.
Primus cylinders: Furnished 0-bitted. 1-Bitted is not available and if specified, 0-bitted is furnished.
Table of Contents
Multiple Tailpiece Cylinders CYL-4
Bulk Pack Cylinders CYL-5
Primus Cylinders-Sub-Assembled CYL-9
A & H, AD, AL, CL, D, ND, KS, S & S200 CYL-10
Tailpieces & Actuators ................................. CYL-16
Miscellaneous Parts .....................................CYL-17
B500 CYL-18
Conventional Cylinders & Housings .....................CYL-18
Tailpieces, Drivers & Parts .............................. CYL-19
B250, B400, E/B, F100, H, MD, S200 CYL-20
Deadbolt Cylinders .....................................CYL-20
IC Cylinders & Miscellaneous Parts ..................... CYL-21
Collars, Tailpieces and Reference Tables ...............CYL-22
B600/700/800 CYL-24
Reference Table .......................................CYL-24
Miscellaneous Parts and Tailpieces. . . . . . . . . . . . . . . . . . . . .CYL-26
IC Housings and Parts ..................................CYL-27
Mortise CYL-28
Conventional Cylinders, L-Series .......................CYL-28
Conventional Cylinders for Adams Rite, Adams Rite,
Lori & Corbin Russwin ..................................CYL-29
Concealed Shell Cylinders .............................. CYL-31
Cams, Cam Screws, Dummy Cylinder . . . . . . . . . . . . . . . . . . . CYL-32
Full Size Interchangeable Core .........................CYL-33
Small Format Interchangeable Core ....................CYL-35
Cylinder Lengths and Collars By Application ............CYL-37
Blocing Ring Requirements .............................CYL-38
Schlage cylinders for Falcon & Von Duprin CYL-39
Rim Cylinders CYL-41
Interchangeable Cores CYL-43
Full Size Interchangeable Cores ........................CYL-43
Small Format Interchangeable Cores ..................CYL-44
Competitor Retrofit Cylinders CYL-45
Corbin Russwin, Sargent, Yale Key-in-Knob/Lever ..... CYL-45
Reference Tables ..................................... CYL-46
Corbin Russwin Master Ring ........................... CYL-47
Cams to Operate Competitor Locks ................... CYL-48
Letter/Mail Box CYL-50
Special Cylinders CYL-51
Pins, Springs & Pinning Components CYL-52
Full Size ............................................... CYL-52
Small Format ......................................... CYL-53
Plugs CYL-56
Shells CYL-57
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
306
Price Book 6
Effective July 9, 2018
CYLINDERS • Multiple Tailpiece Key-in Knob/Lever
Reduce Cylinder Inventory
Multiple tailpiece cylinders allow high inventory flexibility
with low investment. Included with each cylinder are
tailpieces to suit these locks:
• A-Series (all designs)
• AL-Series
• D-Series Knobs
• H-Series Knobs (all designs)
• ND-Series Levers
Cylinders are furnished 0-bitted. Standard pinned cylinders
are furnished with two (2) blank keys. Not available in Faculty
Restroom (hotel) function.
Multiple Tailpiece Key-in-Knob/Lever Cylinders
Keyway Contents
Part
Number
Price Each
Open Restricted
All Keyways Everest,
Everest 29 and Classic
Families
(1) Pre-assembled cylinder 0-bitted, less tailpiece
(1) A301-338 tailpiece, A & H-Series Orbit
(1) A700-031 tailpiece, A, AL, H-Series (except Orbit)
(1) C603-524 tailpiece, D-Series Knobs
(1) N523-022 tailpiece, ND-Series Levers (yellow)
(2) C503-115 cap pin springs
(2) C503-116 cap pins
(2) Key Blanks 35-009 (Everest C)
OR 35-002 (Everest D)
OR 35-270 (Everest 29 S)
OR 35-268 (Everest 29 T)
40-100 62.00 79.00
Primus / Primus XP
All Keyways
(Classic, Everest and
Everest 29)
(1) Pre-assembled cylinder 0-bitted, less tailpiece, LESS keys
(1) A301-338 tailpiece, A & H-Series Orbit
(1) A700-031 tailpiece, AL-Series
(1) C603-524 tailpiece, D-Series Knobs
(1) N523-022 tailpiece, ND-Series Levers (yellow)
(2) C503-115 cap pin springs
(2) C503-116 cap pins
****Primus Keys must be ordered separately****
40-700* / 40-700-XP
Controlled Access 138.00 138.00
40-500* / 40-500-XP
UL437 Listed 169.00 169.00
Order Examples: 40-100 626 S123
40-700-XP 606 S123 (must specify Primus account information and provide necessary Primus documents)
* Primus key blanks must be ordered separately.
CYL-4
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
307
Price Book 6
Effective July 9, 2018
CYL-5
Key-in-Knob/Lever
Interchangeable Cores Bulk Pack • CYLINDERS
Key Large Jobs Faster!
Bulk Packs are kits that contain all of the components needed to build 10 cylinders. For added convenience the
shells are pre-loaded with pins and springs and slid onto a follower. Cams and tailpieces are sold separately in
economical 10-packs to maximize flexibility. Keys and Primus components are also sold separately.
The unit price of the unassembled cylinder is up to 15% less than buying it completely
assembled. In addition to this savings, labor time is reduced since cylinders don’t
have to be taken apart before being pinned in the field. Not available in Faculty Restroom (hotel) functions. Must
specify finish color, length and keyway.
09-764*
Everest Primus and Everest 29 Primus
Bulk Pack
(Includes 10 of each item shown)
10-Piece Bulk Pack Key-in-Knob/Lever Cylinders
Contents (10 each)
Cylinder
Mechanism
Keyway
Type
Bulk Pack
Number
Price Each Pack
Open Restricted
Loaded shells Cap pins Check pins
P l u gs Ca p p i n s p r in gs (Everest and Everest 29
Caps standard pinned only)
Check pin springs
Standard
Classic 09-409 $488.00 $658.00
Everest and
Everest 29 Family 09-751 488.00 658.00
Primus/Primus XP Everest and
Everest 29 09-764 966.00
Primus/Primus XP Classic 09-833 966.00
10-Piece Bulk Pack Mortise Cylinders
Contents (10 each)
Cylinder
Mechanism
Keyway
Type
Bulk Pack
Number
Price Each Pack
Open Restricted
Loaded shells Check pins (Everest and Everest 29
Plugs standard pinned only)
Cam Screws Check pin springs
See next page for cams, collars sold separately.
Available in 1 1/8" and 1 1/4" only.
Standard
Classic 09-412 $576.00 $746.00
Everest and
Everest 29 Family 09-754 576.00 746.00
Primus/Primus XP Everest and
Everest 29 09-767 993.00
Primus/Primus XP Classic 09-835 993.00
10-Piece Bulk Pack Rim Cylinders
Contents (10 each)
Cylinder
Mechanism
Keyway
Type
Bulk Pack
Number
Price Each Pack
Open Restricted
Loaded shells Drivers
Plugs Cap pin springs
Caps Screws & back plate packs
Cap Pins Check pins (Everest and
Collars Everest 29 standard pinned only)
Tailpieces Check pin springs
Standard
Classic 09-410 $669.00 $839.00
Everest and
Everest 29 Family 09-752 669.00 839.00
Primus/Primus XP Everest and
Everest 29 09-765 1,095.00
Primus/Primus XP Classic 09-834 1,095.00
10-Piece Bulk Pack Interchangeable Cores
Contents (10 each)
Cylinder
Mechanism
Keyway
Type
Bulk Pack
Number
Price Each Pack
Open Restricted
Loaded shells Actuating rings
Plugs Actuating pins
Caps Control pins
Cap pins & springs Check pins (Everest and
Everest 29 standard pinned only)
Check pin springs
Standard
Classic 09-411 $590.00 $760.00
Everest and
Everest 29 Family 09-753 590.00 760.00
Primus/Primus XP Everest and
Everest 29 09-766 1,010.00
Primus/Primus XP Classic 09-836 1,010.00
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
308
Price Book 6
Effective July 9, 2018
CYLINDERS • Multiple Tailpiece Key-in Knob/Lever
Unassembled Multiple Tailpiece Key-in-Lever SL Cylinders
Keyway Contents
Part
Number
Price Each
Restricted
Everest B and Everest 29
R Families of keyways
"(1) 33-213 Plug
(1) A508-660 Body
(1) C604-471 Retaining Clip
(1) 90-210 Locking Sidebar for SL
(2) C604-472 SL Sidebar Springs
(1) 34-950 R/B Everest Check Pin
(1) C504-116 R/B Everest Check Pin Spring
(1) 90-212 SL Plug cover
(1) 90-211 End Cap for SL Cylinders
(1) 90-002 SL End Cap Pin
(1) C603-952 SL End Cap Spring
(1) A301-338 tailpiece, A & H-Series Orbit
(1) A700-031 tailpiece, A, AL, H-Series (except Orbit)
(1) C603-524 tailpiece, D-Series Knobs
(1) N523-022 tailpiece, ND-Series Levers (yellow)
***Cylinder Is Shipped Unassembled In The Box***
****Does Not Include L Pins, L Pin Springs Or Key Blanks****"
91-200 $52.00
Primus XP
Everest B and Everest 29
R Families of keyways
"(1) Plug for SL Primus XP
(1) A508-661 SL Primus XP Body
(1) C604-471 Retaining Clip
(1) 90-210 Locking Sidebar for SL
(2) C604-472 SL Sidebar Springs
(1) C603-950 Primus Sidebar
(2) C603-952 Primus Side Bar Springs
(1) 90-212 SL Plug cover
(1) 90-211 End Cap for SL Cylinders
(1) 90-002 SL End Cap Pin
(1) C603-952 SL End Cap Spring
(1) A301-338 tailpiece, A & H-Series Orbit
(1) A700-031 tailpiece, A, AL, H-Series (except Orbit)
(1) C603-524 tailpiece, D-Series Knobs
(1) N523-022 tailpiece, ND-Series Levers (yellow)
***Cylinder Is Shipped Unassembled In The Box***
**** Does Not Include L Pins, L Pin Springs, Primus Finger Pins, Primus Finger Pin
Springs Or Key Blanks****"
91-700 Controlled
Access
95.00
91-500 UL 437
Listed
128.00
CYL-6
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
309
Price Book 6
Effective July 9, 2018
10-Piece Bulk Packs for Unassembled Everest and Everest 29 SL Cylinders
Cylinder
Type
Contents Cylinder
Mechanism Keyway Bulk Pack
Number
Price Each Pack
Restricted
Key-inLever
(10) 33-213 Plug
(10) A508-660 Body
(10) C604-471 Retaining Clip
(10) 90-210 Locking Sidebar for SL
(20) C604-472 SL Sidebar Springs
(10) 34-950 R/B Everest Check Pin
(10) C504-116 R/B Everest Check Pin
Spring
(10) 90-212 SL Plug cover
(10) 90-211 End Cap for SL Cylinders
(10) 90-002 SL End Cap Pin
(10) C603-952 SL End Cap Spring
SL Cylinder
Everest B
or Everest
R Keyway
Families
91-451 $512.00
***Cylinder Is Shipped Unassembled In The Box***
****Does Not Include L Pins, L Pin Springs Or Key Blanks****
(10) Plug for SL Primus XP
(10) A508-661 SL Primus XP Body
(10) C604-471 Retaining Clip
(10) 90-210 Locking Sidebar for SL
(20) C604-472 SL Sidebar Springs
(10) C603-950 Primus Sidebar
(20) C603-952 Primus Side Bar Springs
(10) 90-212 SL Plug cover
(10) 90-211 End Cap for SL Cylinders
(10) 90-002 SL End Cap Pin
(10) C603-952 SL End Cap Spring SL Primus
XP
Everest B
or Everest
R Keyway
Families
91-551 943.00
***Cylinder is shipped unassembled in the box***
**** Does not include L pins, L pin springs, Primus finger pins, Primus finger pin springs
or key blanks****
Mortise
(10) 33-213 Plug
(10) A508-660 Body
(10) C604-471 Retaining Clip
(10) 90-210 Locking Sidebar for SL
(20) C604-472 SL Sidebar Springs
(10) 34-950 R/B Everest Check Pin
(10) C504-116 R/B Everest Check Pin
Spring
(10) 90-212 SL Plug cover
(10) Front and Back Mortise Housings
with Screws (Specify Finish and Length)
(10) 90-002 SL End Cap Pin
(10) C603-952 SL End Cap Spring
SL Cylinder
Everest B
or Everest
R Keyway
Families
91-452 599.00
*** Cylinder is shipped unassembled in the box. See SL cams table for available cams.
Cams and collars sold seperately***
****Does not include L pins, L pin springs or key blanks****
(10) Plug for SL Primus XP
(10) A508-661 SL Primus XP Body
(10) C604-471 Retaining Clip
(10) 90-210 Locking Sidebar for SL
(20) C604-472 SL Sidebar Springs
(10) C603-950 Primus Sidebar
(20) C603-952 Primus Side Bar Springs
(10) 90-212 SL Plug cover
(10) Front and Back Mortise Housings
with Screws (Specify Finish and Length)
(10) 90-002 SL End Cap Pin
(10) C603-952 SL End Cap Spring
SL Primus
XP
Everest B
or Everest
R Keyway
Families
91-552 1,036.00
*** Cylinder is shipped unassembled in the box. See SL cams table for available cams.
Cams and collars sold seperately***
**** Does not include L pins, L pin springs, Primus finger pins, Primus finger pin springs
or key blanks****
Rim
(10) 33-213 Plug
(10) A508-660 Body
(10) C604-471 Retaining Clip
(10) 90-210 Locking Sidebar for SL
(20) C604-472 SL Sidebar Springs
(10) 34-950 R/B Everest Check Pin
(10) C504-116 R/B Everest Check Pin
Spring
(10) 90-212 SL Plug cover
(10) Front and Back Rim Housings with
Screws (Specify Finish)
(10) Rim Cylinder Driver and Tailpiece
(10) 90-211 End Cap for SL Cylinders
(10) 90-002 SL End Cap Pin
(10) C603-952 SL End Cap Spring
SL Cylinder
Everest B
or Everest
R Keyway
Families
91-453 640.00
***Cylinder is shipped unassembled in the box***
****Does not include L pins, L pin springs or key blanks****
(10) Plug for SL Primus XP
(10) A508-661 SL Primus XP Body
(10) C604-471 Retaining Clip
(10) 90-210 Locking Sidebar for SL
(20) C604-472 SL Sidebar Springs
(10) C603-950 Primus Sidebar
(20) C603-952 Primus Side Bar Springs
(10) 90-212 SL Plug cover
(10) Front and Back Rim Housings with
Screws (Specify Finish)
(10) Rim Cylinder Driver and Tailpiece
(10) 90-211 End Cap for SL Cylinders
(10) 90-002 SL End Cap Pin
(10) C603-952 SL End Cap Spring
SL Primus
XP
Everest B
or Everest
R Keyway
Families
91-553 1,071.00
***Cylinder is shipped unassembled in the box***
**** Does not include L pins, L pin springs, Primus finger pins, Primus finger pin springs
or key blanks****
Bulk Pack • CYLINDERS
CYL-7
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
310
Price Book 6
Effective July 9, 2018
CYL-8
CYLINDERS • Bulk Pack Key-in-Knob/Lever Interchangeable Cores
Bulk Pack Modular & SL Cylinder Cams and Collars
Keyway Type Type Contents (10 each) Bulk Pack Part
Number
Price Each
Pack
All (Classic /
Everest C, D,
Everest 29 S, T &
Primus, etc)
Straight Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-476 09-195 $30.00
Straight Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-477 09-196 30.00
L-Series Cam - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-474 09-197 30.00
L-Series Cam - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-475 09-198 30.00
Adam’s Rite Kit - Modular cylinders length (1-1/8; 1-3/8; 1-5/8) L583-446 36-079-037 B220-050 09-199* 150.00
Adam’s Rite Kit - Modular cylinders length (1-1/4; 1-1/2; 1-3/4) L583-447 36-079-037 B220-050 09-200* 150.00
Everest SL
Cylinders
using Everest B
and
Everest 29R
Keyways
Straight Cam - Twist and Lock Design for 1-1/8" L583-802 91-194 47.00
Straight Cam - Twist and Lock Design for 1-1/4" L583-803 91-195 47.00
L Series Cam - Twist and Lock Design for 1-1/8" L583-800 91-196 47.00
L Series Cam - Twist and Lock Design for 1-1/4" L583-801 91-197 47.00
Adams Rite Cam - Twist and Lock Design for 1-1/8" L583-773 36-079-037 B220-050 91-198 166.00
Adams Rite Cam - Twist and Lock Design for 1-1/4" L583-774 36-079-037 B220-050 91-199 166.00
* Specify finish 605, 606, 612, 613, 625 or 626.
10-Piece Tailpiece Packs for Bulk Pack Cylinders (Classic, Everest, Everest 29 & Primus)
Cylinder
Mechanism Description Contents
(10 each)
Bulk Pack Part
Number
Price Each
Pack
All Modular
Cylinders (Classic,
Everest & Primus)
A-Series (except Orbit) A301-337 with C603-098 security disc 09-756 $63.00
A-Series Orbit (except A73) A301-338 09-757
13.00
AL-Series A700-031 09-416
D-Series Levers C604-243 09-418
D-Series Knob C603-524 09-417
ND-Series Levers N523-022 (yellow) 09-019
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
311
Price Book 6
Effective July 9, 2018
CYL-9
Mortise, Rim, Primus Cylinder-Sub Bulk Pack • CYLINDERS
Primus Cylinders-Sub-Assembled
Part Number Type Price
Each
20-200
Primus Classic,
Everest or Everest 29
(Specify Keyway)
Primus classic Key in Lever sub-assembled multiple tailpiece
(A & H series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs
C604-243, ND Series N523-022). *
$95.00
20-201
Primus Classic Mortise Cylinder (specify 1-1/4" or 1-1/8") sub assembled multiple
cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and Straight
(L583-446 or L583-447).*
110.00
20-202 Primus Classic Rim Cylinder sub-assembled. * 113.00
20-203 Primus Classic FSIC sub-assembled. 101.00
20-204
Primus Everest and Primus Everest 29 Key in Lever sub-assembled multiple tailpiece.
(A & H-Series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243,
ND-Series N523-022). *
95.00
20-205
Primus Everest and Primus Everest 29 Mortise Cylinder (1-1/4" or 1-1 /8") sub-assembled
multiple cams-Schlage (L583-474 or L583-475), AR (L583-476 or L583-477)
and Straight (L583-446 or L583-447).
110.00
20-206
Primus Classic,
Everest or Everest 29
UL437 (Specify
Keyway)
Primus Everest and Primus Everest 29 Rim Cylinder sub-assembled. * 113.00
20-207 Primus Everest and Primus Everest 29 FSIC sub-assembled. * 101.00
20-208
Primus Classic UL437 Key in Lever sub-assembled multiple tailpiece. (A & H -Series
Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243,
ND-Series N523-022). *
120.00
20-209
Primus Classic UL437 Mortise Cylinder (specify 1-1/4" or 1-1/8") sub assembled.
Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or L583-477) and
Straight (L583-446 or L583-447).*
134.00
20-210 Primus Classic UL 437 Rim Cylinder sub-assembled. * 138.00
20-211
Primus Everest and Primus Everest 29 UL 437 Key in Lever sub-assembled. Multiple tailpiece
(A & H-Series Orbit A301-338, AL-Series A700-031, D-Series Levers and knobs C604-243,
ND-Series N523-022). *
120.00
20-212
Primus Everest and Primus Everest 29 UL437 Mortise Cylinder (specify 1-1/4" or 1-1/8")
sub assembled. Multiple cams – Schlage (L583-474 or L583-475), AR (L583-476 or
L583-477) and Straight (L583-446 or L583-447).*
134.00
20-213 Primus Everest and Primus Everest 29 UL 437 Rim Cylinder sub-assembled. * 138.00
* Please order separately: Keys, plug pins, Primus finger pins and finger pins springs, side bar and side bar springs.
Primus Competitor Cylinders-Sub-Assembled
Part Number Type Price
Each
20-221
Primus Classic,
Everest or Everest 29
(Specify Keyway)
Primus, sub-assembly, key-in-lever cylinder for Corbin Russwin CL3300 C
$101.00
20-219 Primus, sub-assembly, key-in-lever cylinder for Corbin Russwin CL3400, CL3600
20-218 Primus, sub-assembly, key-in-knob cylinder for Corbin Russwin CK4200
20-214 Primus, sub-assembly, key-in-lever cylinder for Sargent 7, 8, 10 Line Levers
20-215 Primus, sub-assembly, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs
20-216 Primus, sub-assembly, key-in-knob cylinder for Sargent 6 Line Except B Knob
20-220 Primus, sub-assembly, key-in-lever for Yale 5300LN, 5400LN Levers
20-217 Primus, sub-assembly, key-in-knob Yale 5300, 5400, 6200 Knobs
20-222
Primus Classic,
Everest or Everest 29
UL437 (Specify
Keyway)
Primus, sub-assembly, key-in-lever cylinder for Sargent 7, 8, 10 Line Levers
138.00
20-223 Primus, sub-assembly, key-in-knob cylinder for Sargent 7, 8, 9 Line Knobs
20-224 Primus, sub-assembly, key-in-knob cylinder for Sargent 6 Line Except B Knob
20-225 Primus, sub-assembly, key-in-knob Yale 5300, 5400, 6200 Knobs
20-228 Primus, sub-assembly, key-in-lever for Yale 5300LN, 5400LN Levers
20-226 Primus, sub-assembly, key-in-knob cylinder for Corbin Russwin CK4200
20-227 Primus, sub-assembly, key-in-lever cylinder for Corbin RusswinCL3400, CL3600
20-229 Primus, sub-assembly, key-in-lever cylinder for Corbin Russwin CL3300
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
312
Price Book 6
Effective July 9, 2018
A & H-Series Knob Cylinder Reference Table
Function Design
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14
)
Open Restricted
Standard
Functions
Except Orbit
Standard 21-002 $62.00 $79.00
Classic 33-137 A508-653
A301-337
Everest & Everest 29 33-138
Everest 29 SL 91-004 79.00
Everest B & Everest 29 R 33-213 A508-660
Primus 20-724 137.00
Classic 33-136 A508-655
Primus-XP 20-724-XP
Everest & Everest 29 33-119
Everest 29 SL
Primus XP
91-704-XP 137.00
Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-524 169.00
Classic 33-154 A508-655
Primus UL437-XP 20-524-XP
Everest & Everest 29 33-221
Orbit Except
A73 Function
Standard 21-002-122 62.00 79.00
Classic 33-137 A508-653
A301-338
Everest & Everest 29 33-138
Everest 29 SL 91-005 79.00
Everest B & Everest 29 R 33-213 A508-660
Primus 20-724-122 137.00
Classic 33-136 A508-655
Primus-XP 20-724-122-XP
Everest & Everest 29 33-119
Everest 29 SL
Primus XP
91-705-XP 137.00
Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-524-122 169.00
Classic 33-154 A508-655
Primus UL437-XP 20-524-122-XP
Everest & Everest 29 33-221
A73 Orbit
Standard Complete
cylinder
discontinued
but may be
assembled in
the eld.
-
Classic` 33-137 A508-653
A301-339
Primus
Everest & Everest 29 33-138
Primus-XP
Classic 33-136
A508-655
Primus UL437
Everest & Everest 29 33-119
Primus UL437-XP
Everest & Everest 29 33-221
A85, H185
Faculty
Restroom
Except Orbit
Standard
21-003 92.00 109.00
Classic 33-216
A508-653
A501-991
& C503-767
Everest & Everest 29 33-235
Orbit 21-003-168 92.00 109.00
Classic 33-216 A501-693
Everest & Everest 29 33-235
A, H
ORB
A, HD
D
thick
door
All Modular Cylinder
Key Families
All Modular Cylinder
Key Families
ALD, ND
Faculty
Restroom
A
GEO
PLY
TUL
C, D
A
ORB
A73
ORB
Standard
Functions
ALD ND
Standard
Functions
Faculty
Restroom
Knobs
Horizontal
Tailpiece
Levers
Vertical
Tailpiece
CYLINDERS • Key-in-Knob/Lever Reference Tables
A, AD, H-Series
CYL-10
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
313
Price Book 6
Effective July 9, 2018
CYL-11
Reference Tables
AD-Series Key-in-Knob/Lever • CYLINDERS
AD-Series Cylinder Reference Table
Function Design
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway Type Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14)
Open Restricted
All Cylindrical
Exit
(993R, 993S,
993M) with
ATH,
8AT design
only
All
Standard 23-013 $62.00 $79.00 Classic 33-137 A508-653
C604-243
Everest & Everest 29 33-138
Everest 29 SL 91-017 79.00 Everest B and
Everest 29 R 33-213 A508-660
Primus 20-750 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-134
Primus XP 20-750-XP 137.00 Classic 33-136
Everest & Everest 29 33-134
Everest 29 SL
Primus XP 91-715-XP 137.00 Everest B and
Everest 29 R 33-214 A508-661
Primus UL437 20-550 169.00 Classic 33-154
A508-655
Everest & Everest 29 33-221
Primus UL437 XP 20-550-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
MS, MD All
Standard 23-118 62.00 79.00 Classic 33-137 A508-653
23538085
Everest & Everest 29 33-138
Everest 29 SL 91-019 79.00 Everest B and
Everest 29 R 33-213 A508-660
Primus 20-854 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-134
Primus XP 20-854-XP 137.00 Classic 33-136
Everest & Everest 29 33-134
Everest 29 SL
Primus XP 91-721-XP 137.00 Everest B and
Everest 29 R 33-214 A508-661
Primus UL437 20-554 169.00 Classic 33-154
A508-655
Everest & Everest 29 33-221
Primus UL437 XP 20-554-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
993R
993S
993M
Except
ATH, 8AT
Standard 23-118 62.00 79.00 Classic 33-137 A508-653
23538085
Everest & Everest 29 33-138
Everest 29 SL 91-019 79.00 Everest B and
Everest 29 R 33-213 A508-660
Primus 20-854 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-134
Primus XP 20-854-XP 138.00 Classic 33-136
Everest & Everest 29 33-134
Everest 29 SL
Primus XP 91-721-XP 137.00 Everest B and
Everest 29 R 33-214 A508-661
Primus UL437 20-554 169.00 Classic 33-154
A508-655
Everest & Everest 29 33-221
Primus UL437 XP 20-554-XP 169.00 Classic 33-154
Everest & Everest 29
33-221
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
314 Price Book 6
Effective July 9, 2018
AL-Series Cylinder Reference Table
Function Design
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14
)
Open Restricted
Standard
Functions
All
Standard 21-020 $62.00 $79.00
Classic 33-137 A508-653 A700-031Everest & Everest 29 33-138
Everest 29 SL 91-006 79.00
Everest B & Everest 29 R 33-213 A508-660
Primus 20-728 137.00
Classic 33-136 A508-655
A700-031
Primus-XP 20-728-XP
Everest & Everest 29 33-119
Everest 29 SL
Primus XP
91-706-XP 137.00
Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-528 169.00
Classic 33-154 A508-655
Primus UL437-XP 20-528-XP
Everest & Everest 29 33-221
AL85 Faculty
Restroom Standard 21-021 92.00 109.00
Classic 33-216 A508-653 A700-023
Everest & Everest 29 33-235
CYLINDERS • Key-in-Knob/Lever Reference Tables AL, D-Series Knob
CYL-12
D-Series Knob Cylinder Reference Table
Function
Door
Thickness
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14
)
Open Restricted
Standard
Functions
Standard
Standard 23-001 $62.00 $79.00
Classic
33-137 A508-653
C603-524
Everest & Everest 29
33-138
Everest 29 SL 91-016 79.00
Everest B & Everest 29 R
33-213 A508-660
Primus 20-748 137.00
Classic
33-136 A508-655
Primus-XP 20-748-XP
Everest & Everest 29
33-119
Everest 29 SL
Primus XP
91-714-XP 137.00
Everest B & Everest 29 R
33-214 A508-661
Primus UL437 20-548
169.00
Classic
33-154
A508-655
Primus XP
UL437
20-548-XP
Everest & Everest 29
33-221
2” - 2 1/2”
Standard 21-002 62.00 79.00
Classic
33-137 A508-653
A301-337
Everest & Everest 29
33-138
Everest 29 SL 91-004 79.00
Everest B & Everest 29 R
33-213 A508-660
Primus 20-724 137.00
Classic
33-136 A508-655
Primus-XP 20-724-XP
Everest & Everest 29
33-119
Everest 29 SL
Primus XP
91-704-XP 137.00
Everest B & Everest 29 R
33-214 A508-661
Primus UL437 20-524
169.00
Classic
33-154
A508-655
Primus XP
UL437
20-524-XP
Everest & Everest 29
33-221
D85
Faculty
Restroom
Standard Standard 23-003 92.00 109.00
Classic
33-216
A508-653 C604-106 w/
C503-767
Everest & Everest 29
33-235
2” - 2 1/2” Standard 23-003-098 92.00 109.00
Classic
33-216
Everest & Everest 29
33-235
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
315
Price Book 6
Effective July 9, 2018
D-Series Lever Cylinder Reference Table
Function
Door
Thickness
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14
)
Open Restricted
Standard
Functions
Standard
Standard 23-013 $62.00 $79.00
Classic 33-137 A508-653
C604-243
Everest & Everest 29 33-138
Everest 29 SL 91-017 79.00
Everest B & Everest 29 R 33-213 A508-660
Primus 20-750 137.00
Classic 33-136 A508-655
Primus-XP 20-750-XP
Everest & Everest 29 33-119
Everest 29 SL
Primus XP
91-715-XP 137.00
Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-550 169.00
Classic 33-154 A508-655
Primus UL437-XP 20-550-XP
Everest & Everest 29 33-221
D85 Faculty
Restroom Standard 23-014 92.00 109.00
Classic 33-216 A508-653
C604-348
w/ C503-767
Everest & Everest 29 33-235
Reference Tables D-Series, ND-Series Key-in-Knob/Lever • CYLINDERS
CYL-13
ND-Series Lever Cylinder Reference Table
Function
Door
Thickness Cylinder Mechanism
Complete
Cylinder
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14
)
Open Restricted
Standard
Functions
Standard
Standard 23-065 $62.00 $79.00
Classic 33-137 A508-653
N523-022
Everest & Everest 29 33-138
Everest SL (R/B
Keyways only)
91-018 79.00
Everest B & Everest 29 R 33-213 A508-660
Primus 20-765 137.00
Classic 33-136 A508-655
Primus-XP 20-765-XP
Everest & Everest 29 33-119
Everest SL Primus XP
(R/B Keyways only) 91-718-XP 137.00
Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-565 169.00
Classic 33-154 A508-655
Primus UL437-XP 20-565-XP
Everest & Everest 29 33-221
ND85
Faculty
Restroom
Standard 23-000 92.00 109.00
Classic 33-216
A508-653
N523-123
w/ C503-767
Everest & Everest 29 33-235
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
316
Price Book 6
Effective July 9, 2018
CYLINDERS • Key-in-Knob/Lever Reference Tables S, S200-Series
CYL-14
S, S200 (Lever Only) Cylinder Reference Table
Cylinder
Mechanism Design
Complete
Cylinder
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-14
)Sleeve
Open Restricted
Standard
Keyed
Levers
21-059 $62.00 $79.00 Classic 33-137 A508-653
S605-231 S605-192
Everest & Everest 29 33-138
Everest 29 SL 91-007 79.00 Everest B & Everest 29 R 33-213 A508-660
Primus 20-752 137.00 Classic 33-136 A508-655
Primus-XP 20-752-XP Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-772-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-552 169.00 Classic 33-154 A508-655
Primus UL437-XP 20-552-XP Everest & Everest 29 33-221
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
317
Price Book 6
Effective July 9, 2018
CYL-15
Reference Tables CL and Portable Security Key-in-Knob/Lever • CYLINDERS
Door Drawer
For pins, springs, etc.,
see CYL-50.
KS-Series Padlocks KC-Series Cables
CL-Series Cabinet Lock Cylinder Reference Table
Application
Cylinder
Mechanism
Complete
Cylinder
Price Each
Keyway Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Actuator
(See CYL-15)Open Restricted
Door
Standard 20-172 $62.00 $79.00 Classic 33-137 A508-653
CL10-360
Everest & Everest 29 33-138
Everest 29 SL 91-001 79.00 Everest B & Everest 29 R 33-213 A508-660
Primus 20-772 137.00 Classic 33-136 A508-655
Primus XP 20-772-XP Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-719-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-572 169.00 Classic 33-154 A508-655
Primus XP UL437 20-572-XP Everest & Everest 29 33-221
Drawer Standard 20-174 62.00 79.00 Classic 33-137 A508-653
Everest & Everest 29 33-138
Everest 29 SL 91-002 79.00 Everest B & Everest 29 R 33-213 A508-660
Primus 20-774 137.00 Classic 33-136 A508-655
Primus XP 20-774-XP Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-720-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
Primus UL437 20-574 169.00 Classic 33-154 A508-655
Primus XP UL437 20-574-XP Everest & Everest 29 33-221
Portable Security Cylinders
Application
Cylinder
Mechanism
Complete
Cylinder
Price Each
Keyway Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Actuator
(See CYL-15)
Open Restricted
KS-Series
Standard 47-413 $62.00 $79.00 Classic 33-137 A508-653
KZ32DA0
Everest & Everest 29 33-138
Primus® 47-743 137.00 Classic 33-136
A508-655
Primus XP 47-743-XP Everest & Everest 29 33-119
Primus UL437 47-542 169.00 Classic 33-154
Primus XP UL437 47-542-XP Everest & Everest 29 33-221
KC-Series
Standard 47-414 62.00 79.00 Classic 33-137 A508-653
KZ34DA0
Everest & Everest 29 33-138
Primus 47-744 137.00 Classic 33-136
A508-655
Primus XP 47-744-XP Everest & Everest 29 33-119
Primus UL437 47-543 169.00 Classic 33-154
Primus XP UL437 47-543-XP Everest & Everest 29 33-221
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
318
Price Book 6
Effective July 9, 2018
CYL-16
CYLINDERS • Key-in-Knob/Lever Parts
A, AD, AL, L, D, H, ND, S, S200-Series
For pins, springs, etc.,
see CYL-50.
Tailpieces and Actuators
Part Number Lockset Description Price
Each
A201-934 A73 Orbit Classic conventional non modular cylinders $9.20
A301-337 A, H
Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus)
A301-337 requires C503-767 driver.
9.20
A301-338 A, H Orbit 9.20
A301-339 A73 Orbit 9.20
A501-693 A85, H185 Orbit Faculty Restroom function. Requires C503-767 driver. 9.70
A501-991 A85, H185 Faculty Restroom function. Requires C503-767 driver.
A508-606 A, H Classic conventional non modular. 3.10
A508-614 Orbit Classic conventional non modular. 1.80
A700-031 AL All except hotel function. 1.80
A700-023 AL85 Faculty Restroom function for Modular Cylinder. Requires C503-767 driver. 6.20
C503-524 D Knobs (Modular, Primus and Everest), Levers (Classic keyways prior to June 2010) 1.80
C604-243 D Levers (Modular, Primus and Everest), Knobs (Classic keyways prior to June 2010) 1.80
C604-106 D85 Knobs, hotel function. Requires C503-767 driver. 6.20
C604-107 D85 Knobs, hotel function, thick door. Requires C503-767 driver. 10.90
C604-348 D85 Levers, hotel function. Requires C503-767 driver. 6.40
N523-022 ND Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus). 1.80
N523-023 ND Classic Conventional (silver) non modular. 1.80
N523-123 ND85 Faculty Restroom function. Requires C503-767 driver. 5.90
S605-228 S, S200 Classic Conventional non modular. 2.80
S605-231 S, S200 Modular cylinders all keyway families (Classic, Everest, Everest 29 & Primus). 9.70
Hotel Function Indicator Pins, Etc.
Part
Number Description Price
Each
C503-767 Driver for hotel tailpieces $2.00
C603-195* Obstruction pin, Classic 1.60
C604-144 Indicator pin spring, Classic
(order in multiples of 100) 0.26
C604-362 Obstruction pin, Everest & Everest 29 1.60
C604-368 Indicator pin, Everest & Everest 29 4.90
C604-369 Indicator pin spring, Everest & Everest 29
(order in multiples of 100) 0.26
C604-371 Indicator pin, Classic
(except Reverse sections) 5.10
C604-372 Indicator pin, Classic
(Reverse sections) 5.10
* Not compatible with Quad keyway cylinders manufactured before 1999.
AD Series Lock - Tailpieces
Part
Number Description Keyway Lever
Style
Price
Each
C603-524 All AD Cylindrical Locks - CY Classic
non modular
All $1.60
AD Exit -993R, 993S, 993M ATH, 8AT
C604-243 All AD Cylindrical Locks Modular Cylinders all keyway families
(Classic, Everest, Everest 29 & Primus)
All 1.80
AD Exit - 993R, 993S, 993M ATH, 8AT
23538077 All AD Mortise locks - MS, MD Classic
non modular
All 1.90
AD Exit - 993R, 993S, 993M Except ATH, 8AT
23538085 All AD Mortise locks - MS, MD Modular Cylinders all keyway families
(Classic, Everest, Everest 29 & Primus)
All 1.90
AD Exit - 993R, 993S, 993M Except ATH, 8AT
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
319
Price Book 6
Effective July 9, 2018
CYL-17
Miscellaneous Parts Complete Locks • CYLINDERS
Miscellaneous Parts
Part
Number Description Price
Each
CL10-301 CL-Series cylinder retaining screw $0.44
CL10-360 CL-Series driver 2.60
CL10-361 CL-Series actuator, 7/8" to 1 1/8" door or drawer 2.60
CL10-362 CL-Series actuator, 1 3/8" door or drawer 2.60
F605-038 F Series plug retainer (order in multiples of 100) 0.24
KZ32BB0 KS Padlocks-Series cylinder housing screw (order in multiples of 30) 1.20
KZ32DA0 KS Padlocks-Series cylinder driver(order in multiples of 30) 2.40
KZ33DC0 KC Cable-Series driver mounting screw (order in multiples of 30) 1.50
KZ34CA0 KC Cable-Series cylinder cap (order in multiples of 30) 2.10
KZ34ED0 KC Cable-Series cylinder cap pin (order in multiples of 30) 0.80
KZ34DA0 KC Cable -Series driver (order in multiples of 30) 2.60
KZ38BA1** KS Padlocks 20, 40, 70, 80, 90 and KC-Series cylinder housing (order in multiples of 20) 8.50
KZ38BA2** KS Padlock10 and KC-Series cylinder housing (order in multiples of 20) 8.50
S605-192 S, S200 sleeve 1.90
S605-228 S, S200 driver 2.80
XA10-594* Spacer for 5-pin cylinder in 6-pin A or H-Series knob 10.70
* Extended factory lead time.
** KC-Series Cables accept both the KZ38BA1 and the KZ38BA2 cylinder housings.
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
320
Price Book 6
Effective July 9, 2018
CYL-18
CYLINDERS • Deadbolts B500-Series
Cylinders, Parts
B500 Series Cylinders - Single Cylinder Deadbolts
Part Number Description Door Thickness
Price Each
Open Restricted
22-003 Standard 1 3/8” - 1 3/4” $62.00 $79.00
91-009 Everest 29 SL (R/B Keyways only) 1 3/8" - 1 3/4" 79.00
22-004 Standard 1 3/4” - 2 1/4” 62.00 79.00
91-010 Everest 29 SL (R/B Keyways only) 1 3/4" - 2 1/4" 79.00
20-188 Primus 1 3/8” – 1 7/8” 137.00
20-188-XP Primus XP 1 3/8” – 1 7/8”
91-702-XP Everest 29 SL Primus XP (R/B Keyways only) 1 3/8" - 1 7/8" 137.00
20-189 Primus 1 7/8” – 2 1/4” 137.00
20-189-XP Primus XP 1 7/8” – 2 1/4”
91-703-XP Everest 29 SL Primus XP (R/B Keyways only) 1 7/8" - 2 1/4" 137.00
20-190 Primus UL 1 3/8” – 1 7/8” 169.00
20-190-XP Primus XP UL 1 3/8” – 1 7/8”
20-191 Primus UL 1 7/8” – 2 1/4” 169.00
20-191-XP Primus XP UL 1 7/8” – 2 1/4”
B500 Series Cylinders - Double Cylinder Deadbolts*
Part Number Description Door Thickness
Price Each
Open Restricted
22-645 Standard 1 3/8” - 1 3/4” $62.00 $79.00
91-014 Everest 29 SL (R/B Keyways only) 1 3/8" - 1 3/4" 79.00
22-646 Standard 1 3/4” - 2 1/4” 62.00 79.00
91-015 Everest 29 SL (R/B Keyways only) 1 3/4" - 2 1/4" 79.00
20-745 Primus 1 3/8” – 1 7/8” 137.00
20-745-XP Primus XP 1 3/8” – 1 7/8”
91-712-XP Everest 29 SL Primus XP (R/B Keyways only) 1 3/8" - 1 7/8" 137.00
20-746 Primus 1 7/8” – 2 1/4” 137.00
20-746-XP Primus XP 1 7/8” – 2 1/4”
91-713-XP Everest 29 SL Primus XP (R/B Keyways only) 1 7/8" - 2 1/4" 137.00
20-545 Primus UL 1 3/8” – 1 7/8” 169.00
20-545-XP Primus XP UL 1 3/8” – 1 7/8” 169.00
20-546 Primus UL 1 7/8” – 2 1/4” 169.00
20-546-XP Primus XP UL 1 7/8” – 2 1/4”
* Part numbers for double sided cylinders represent one cylinder only.
B500 Series Cylinder Parts
Cylinder Mechanism Complete Cylinder Keyway Type Plug Shell
Standard
See single & double cylinder part
numbers listed above
Classic 33-137 A508-653
Everest & Everest 29 33-138
Everest 29 SL Everest 29 (R/B Keyways only) 33-213 A508-660
Primus/Primus XP Classic 33-136 A508-655
Everest & Everest 29 33-119
Everest 29 SL Primus XP Everest 29 (R/B Keyways only) 33-214 A508-661
Primus UL/Primus XP UL Classic 33-154 A508-655
Everest & Everest 29 33-221
B500 Series Cylinders - B561 One-Way Deadbolt
Part Number Description Door Thickness
Price Each
Open Restricted
22-069 Standard 1 3/8” - 2 1/4” $62.00 $79.00
91-011 Everest 29 SL (R/B Keyways only) 1 3/8" - 2 1/4" 79.00
20-071 Primus 1 3/8” - 2 1/4”
137.0020-071-XP Primus XP 1 3/8” - 2 1/4”
91-701-XP Everest 29 SL Primus XP (R/B Keyways only) 1 3/8" - 2 1/4"
20-072 Primus UL 1 3/8” - 2 1/4” 169.00
20-072-XP Primus XP UL 1 3/8” - 2 1/4”
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
321
Price Book 6
Effective July 9, 2018
CYL-19
Tailpieces
Part Number Description Door Thickness Price Each
Single Cylinder, B560P, B563P B520-651 1 3/8" - 1 3/4"
$2.60
B520-652 <1 3/4" - 2 1/4"
Single Cylinder, B560GD, B560BD, B563GD, B563BD B202-957 1 3/8" - 2 1/4"
Single Cylinder, B560R, B563R B600-041 1 3/8" - 2 1/4"
Single Cylinder, B561 B520-667 1 3/8" - 2 1/4"
Double Cylinder, B562P (Classic Non-Modular) B600-045* 1 3/8" - 1 3/4"
B600-046* <1 3/4" - 2 1/4"
Double Cylinder, B562P (Everest/Primus, Classic Modular) B600-085* 1 3/8" - 1 3/4"
B600-086* <1 3/4" - 2 1/4"
Double Cylinder, B562GD, B562BD B202-580* 1 3/8" - 2"
Double Cylinder, B562R B600-040* 1 3/8" - 2 1/4"
Keyless B580, B581 B600-041 1 3/8" - 2 1/4"
Keyless B571 B520-653 1 3/8" - 2 1/4"
* Order two of each for double cylinder deadbolts.
B500-Series
Cylinders, Parts Deadbolts • CYLINDERS
Miscellaneous Parts
Part
Number Description Price
Each
36-086* Collar (Trim ring) 9.30
B600-071 Washer 0.80
B300-108 Cylinder Retaining Screw 1.40
B520-541 Security insert for collar 10.90
B302-043* Housing, outside cylinder, conventional 32.00
B520-648 Housing, inside cylinder, conventional 32.00
B600-092* Inside snap-on faceplate only, for all non-IC double cylinder deadlocks 2.70
* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e.
B500 Series IC Housings
Cylinder Type Housing Part Number* Door Thickness Price
Each
Single Cylinder, Small Format Interchangeable Core Outside B610-204 1 3/8" - 2 1/4" $55.70
Single Cylinder, Full Size Interchangeable Core Outside B610-203 1 3/8" - 2 1/4" 60.00
Double Cylinder, Small Format Interchangeable Core Outside B610-204 1 3/8" - 2 1/4" 55.70
Inside B610-281** 1 3/8" - 2 1/4" 55.70
Double Cylinder, Full Size Interchangeable Core Outside B610-205 1 3/8" - 2 1/4" 60.00
Inside B610-028** 1 3/8" - 2 1/4" 57.40
* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e.
** Inside housing does not include snap-on faceplate.
Miscellaneous Parts for B500 Series IC Cylinders
Part
Number Description Price
Each
B600-029 Driver, B560/562J $5.10
B610-032 Cotter pin for tailpiece, B560/562J (1 = pack of 50) 44.00
B600-106 Driver, SFIC 16.40
B600-107 Throw member, SFIC 3.00
B600-108 Waldes retaining ring, B560/562BD (multiples of 100) 0.34
B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks 9.20
B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks 9.80
B610-040 Tailpiece and cotter pin, B562J 14.30
B610-041 Tailpiece and cotter pin, B560J 14.00
* Specify finish: 605, 606, 609, 612, 613, 619, 625, 626, and 643e.
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
322
Price Book 6
Effective July 9, 2018
CYL-20
CYLINDERS • Deadbolts B250, H, S200-Series,
CS200-Series
Cylinder Only
5-Pin Cylinder Retaining Screw Location
Universal
Housing
(steel)
6-Pin Cylinder Retaining Screw Location
Universal
Housing
(steel)
5-Pin Cylinder Retaining Screw Location
Universal
Housing
(steel)
6-Pin Cylinder Retaining Screw Location
Universal
Housing
(steel)
Single Cylinder Double Cylinder
Cylinders Only, B250, H, and S200-Series
(S200 ordered before Feb, 2008)
Description Part Number
Price Each
Open Restricted
5-Pin C, CE, E, F only 22-001 $62.00 $79.00
6-Pin Standard 22-002
Primus 20-729* 137.00
Primus XP 20-188-XP
Primus UL 437 20-529* 169.00
Primus XP UL437 20-529-XP*
* Must be used in locks with universal housings (B202-824 or B202-825).
Cylinders Only
S200 ordered after Feb, 2008
Description Part Number
Price Each
Open Restricted
6-Pin Standard 22-081 $62.00 $79.00
Primus 24-769 137.00
Primus XP 24-769-XP
Primus UL 437 24-569 169.00
Primus XP UL437 24-569-XP
Cylinders CS200-Series
Description Part Number
Price Each
Open Restricted
6-Pin Standard 22-093 $62.00 $79.00
Cylinder Retaining Screw
Description Part Number Price Each
B520-298 Retaining screw for all models above $0.76
Cylinders & Housings, S200-Series
(For Locks after Feb 26, 2008)
Description Part Number
Price Each
Open Restricted
6-Pin Standard 22-082 $92.00
Primus 24-770 168.00
Primus XP 24-770-XP 168.00
Primus UL437 24-570 199.00
Primus XP UL437 24-570-XP 199.00
Housing only B202-824 27.50
Housings With and Without Cylinders
(S200 ordered before Feb, 2008)
Series Housing Description Outside Inside
Price Each
Open Restricted
B250, B400,
E/B
(Primus
only),
H (except
H160),
S200
Universal
(steel)
5-Pin C, CE, E, F 22-017 22-018 $92.00
6-Pin Standard 22-019 22-020 92.00
Primus 20-730 20-731 168.00
Primus XP 20-730-XP 20-731-XP 168.00
Primus UL437 20-530 20-531 199.00
Primus UL437 XP 20-530-XP 20-531-XP 199.00
Housing only B202-824 B202-825 27.50
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
323
Price Book 6
Effective July 9, 2018
CYL-21
B250, H, S200-Series
Full Size Interchangeable Core Deadbolts • CYLINDERS
Low, 10-32 Bolts
For cores,
see CYL-42
10-32 Bolts,
Angled Driver
1/4-28 Bolts
B250, H and S200-Series Interchangeable Core Cylinders
Series Core Mechanism Side Part
Number
Price
Each
B250, H, S200 Housing Less Core Outside 22-061 $67.00
Inside 22-062
Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores and cylinders only.
Cylinders S200-Series
(For Locks after Feb 26, 2008)
Description Part
Number
Price
Each
Housing Less Core S306-135 $70.00
Finishes: 605, 606, 609, 612, 613, 625 and 626 for housings; 606 and 626 for cores
and cylinders only.
Miscellaneous Parts for B250 Series IC Cylinders
Part
Number Description Price
Each
36-086* Collar (Trim ring) $9.30
B520-235 Driver 5.10
B520-240 Waldes retainer (order in multiples of 100) 0.54
B520-541 Security insert for collar 10.90
* Specify finish: 605, 609, 612, 613, 625, 626.
Miscellaneous S200-Series (For Locks after Feb 26, 2008)
Part
Number Description Price
Each
36-086* Collar (Trim ring) 9.30
B520-541 Security insert for collar 9.90
B600-029 Driver 5.10
B600-032 Cotter Pin (order in multiples of 100) 0.52
B600-041 Tailpiece (IC) 2.70
B520-685 Tailpiece 2.70
B600-071 Washer 0.80
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
324
Price Book 6
Effective July 9, 2018
CYL-22
CYLINDERS • Deadbolts B250, H, S200-Series
Collars and Tailpieces
Lazy Tailpieces, B250, H, and S200-Series
Part Number Description Price Each Part Number Description Price Each
B202-269 Double cylinder 0.810" 2.30 B220-036 Double cylinder 1.375" $7.00
B202-369 Double cylinder 0.685" 2.30 B502-999 S200 2.500" 3.60
B202-370 Double cylinder 0.550" 2.30 B520-236 Double cylinder 1.325" 5.10
B202-453 Double cylinder 0.622" 8.10 B520-237 Double cylinder 1.100" 5.10
B202-557 Single cylinder 1.850" 2.30 B520-242 Single cylinder 2.200" 11.80
B202-558 Single cylinder 2.000" 2.30 B520-243 Single cylinder 2.600" 11.80
B202-580 Double cylinder 0.450" 2.60 B590-443 Single cylinder 1.470" 2.70
B202-957 Single cylinder 1.410" 2.60 E205-204 Single cylinder 3" breakoff 8.40
B220-032 Double cylinder 1.031" 2.60
Drivers for Lazy Tailpieces
Part Number Description Price Each
B520-375 Classic Non Modular $2.70
B502-949 Modular Cylinder All Keyway Families (Classic, Everest, Everest 29 & Primus) 1.60
Collars (Trim Rings and Security Inserts), B250, H, and S200-Series
Part Number Specify Finish Description Price Each
02-037 •MD160 Series decorative cylinder rose, specify design $10.20
36-066 •Trim ring, 1/8" 8.80
36-067 •Trim ring, 7/16" 12.40
36-068 Security insert, 1/8" 5.50
36-069 Security insert, 7/16" 10.60
36-070 Security insert pack, 36-068 1/8" and 36-069 7/16" 16.30
36-071 •Trim ring and security insert pack, 36-066 and 36-068 1/8" 14.20
36-072 •Trim ring and security insert pack, 36-067 and 36-069 7/16" 22.70
B520-541 Security insert, 1" for interchangeable core 10.90
36-085 •Trim ring and security insert pack, B520-541 and 36-086 1" 26.30
36-086 •Trim ring, 1" 9.30
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
325
Price Book 6
Effective July 9, 2018
CYL-23
B250, H, S200-Series
Tailpiece and Collar Application Chart Deadbolts • CYLINDERS
Tailpieces and Collars Application Chart, B250, H, and S200-Series (Continued)
Model/Function Cylinder Door Thickness Tailpiece
(See CYL-20)
Collar(s)
(See CYL-20)
B250
5-Pin
1 5/16" – 1 5/8" B202-558 7/16" + 1/8"
1 11/16" – 2 1/4" B202-558 7/16"
over 2 1/4" – 2 9/16" B202-558 1/8"
6-Pin
1 5/16" – 1 3/8" B202-558 Two 1/8" & One 7/16"
1 7/16" – 1 15/16" B202-558 7/16" + 1/8"
2" – 2 3/8" B202-558 7/16"
over 2 3/8" – 2 9/16" E205-204 7/16"
2 5/8" – 2 3/4" B202-558 1/8"
IC
1 5/16" – 1 1/2" B520-242 1" + 1/8"
over 1 1/2" – 2 1/8" B520-242 1"
over 2 1/8" – 2 3/8" B520-243
over 2 3/8" – 2 5/8" B520-243 7/16" + 1/8"
over 2 5/8" – 3 1/8" B520-242 7/16"
B252
5-Pin
1 5/16" – 1 3/8" B202-370 7/16" + 1/8"
1 1/2" – 1 5/8" B202-269
1 11/16" – 1 15/16" B202-580 7/16"
2" – 2 3/8" B202-269
2 7/16" – 2 11/16" B202-453 1/8"
2 3/4" – 2 7/8" B202-269
6-Pin
1 3/16" – 1 3/8" B202-269 Two 1/8"
1 7/16" – 1 1/2" B202-370 7/16" + 1/8"
1 9/16" – 1 15/16" B202-369
2" – 2 3/16" B202-370 7/16"
2 1/4" – 2 11/16" B202-269
2 3/4" – 2 13/16" B202-370 1/8"
2 7/8" – 3 1/8" B202-369
IC
1 5/16" – 1 5/8" B520-237 1" + 1/8"
over 1 5/8" – 1 7/8" B520-237 1"
over 1 7/8" – 2 1/8" B520-236 1"
over 2 1/8" – 2 3/8" B520-236 7/16" + 1/8"
over 2 5/8" – 3 1/8" B520-236 7/16"
H except discontinued H160
5-Pin 1 3/8"
B202-558
7/16" + 1/8"
1 3/4" 7/16"
6-Pin
1 3/8" 7/16" + two 1/8"
1 3/4" 7/16" + 1/8"
IC 1 3/8" B520-242 1" + 1/8"
1 3/4" 1"
S200 (for locks ordered
before February 2008)
6-Pin 1 3/8" – 1 5/8" B502-999 1" + 1/8"
1 5/8" – 2" 1"
IC 1 3/8" – 1 5/8" B520-242 1" + 1/8"
1 5/8" – 2" B520-243 1"
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
326
Price Book 6
Effective July 9, 2018
CYL-24
CYLINDERS • Deadbolts B600/700/800-Series
Non-IC Reference Table
Single Cylinder Double Cylinder
B600/700/800-Series Cylinder Reference Table
Cylinder
Mechanism Function
Door
Thickness
Cylinder Less
Housing
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-26
)
Open Restricted
B600-Series
Standard B660, B663
1 3/8” – 2 1/2” 22-644 $62.00
$79.00
Classic 33-167 A508-653 B610-084
Everest & Everest 29 33-186
Everest 29 SL 91-032 Everest B & Everest 29 R 33-213 A508-660
B600-Series
Standard
B661, B664
1 3/8” – 2” 22-642 62.00 Classic 33-167 A508-653 B610-082Everest & Everest 29 33-186
Everest 29 SL 91-030 Everest B & Everest 29 R 33-213 A508-660
B600-Series
Standard 2” – 2 1/2” 22-643 62.00 Classic 33-167 A508-653 B610-083Everest & Everest 29 33-186
Everest 29 SL 91-031 Everest B & Everest 29 R 33-213 A508-660
B600-Series
Standard
B662
1 3/8” – 2” 22-085 62.00 Classic 33-167 A508-653 B610-085Everest & Everest 29 33-186
Everest 29 SL 91-028 Everest B & Everest 29 R 33-213 A508-660
B600-Series
Standard 2” – 2 1/2” 22-086 62.00 Classic 33-167 A508-653 B610-086Everest & Everest 29 33-186
Everest 29 SL 91-029 Everest B & Everest 29 R 33-213 A508-660
B700 -Series
Primus
B760, B763 1 3/8” – 2 1/2” 20-744
137.00
Classic 33-136
A508-655
B610-084
Everest & Everest 29 33-119
B761, B764
1 3/8” – 2” 20-742 Classic 33-136 B610-082
Everest & Everest 29 33-119
2” – 2 1/2” 20-743 Classic 33-136 B610-083
Everest & Everest 29 33-119
B762
1 3/8” – 2” 20-745 Classic 33-136 B610-085
Everest & Everest 29 33-119
2” – 2 1/2” 20-746 Classic 33-136 B610-086
Everest & Everest 29 33-119
B700 -Series
Primus-XP B760-XP,
B763-XP 1 3/8” – 2 1/2”
20-744-XP 137.00 Classic 33-136 A508-655
B610-084
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-711-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
B700 -Series
Primus-XP
B761-XP,
B764-XP
1 3/8” – 2”
20-742-XP 137.00 Classic 33-136 A508-655
B610-082
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-709-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
B700 -Series
Primus-XP 2” – 2 1/2”
20-743-XP 137.00 Classic 33-136 A508-655
B610-083
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-710-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
B700 -Series
Primus-XP
B762-XP
1 3/8” – 2”
20-745-XP 137.00 Classic 33-136 A508-655
B610-085
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-712-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
B700 -Series
Primus-XP 2” – 2 1/2”
20-746-XP 137.00 Classic 33-136 A508-655
B610-086
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 91-713-XP 137.00 Everest B & Everest 29 R 33-214 A508-661
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
327
Price Book 6
Effective July 9, 2018
CYL-25
B600/700/800-Series
Non-IC Reference Table Deadbolts • CYLINDERS
B600/700/800-Series Cylinder Reference Table (continued)
Cylinder
Mechanism Function
Door
Thickness
Cylinder Less
Housing
Price Each Keyway
Type
Plug
(See CYL-53)
Shell
(See CYL-55)
Tailpiece
(See CYL-26
)
Open Restricted
B800-Series
Primus UL437
B860, B863 1 3/8” – 2 1/2” 20-544
$169.00
Classic 33-154
A508-655
B610-084
Everest & Everest 29 33-221
B861, B864
1 3/8” – 2” 20-542 Classic 33-154 B610-082
Everest & Everest 29 33-221
2” – 2 1/2” 20-543 Classic 33-154 B610-083
Everest & Everest 29 33-221
B862
1 3/8” – 2” 20-545 Classic 33-154 B610-085
Everest & Everest 29 33-221
2” – 2 1/2” 20-546 Classic 33-154 B610-086
Everest & Everest 29 33-221
B800-Series
Primus-XP
UL437
B860-XP,
B863-XP 1 3/8” – 2 1/2” 20-544-XP Classic 33-154
A508-655
B610-084
Everest & Everest 29 33-221
B861-XP,
B864-XP
1 3/8” – 2” 20-542-XP Classic 33-154 B610-082
Everest & Everest 29 33-221
2” – 2 1/2” 20-543-XP Classic 33-154 B610-083
Everest & Everest 29 33-221
B862-XP
1 3/8” – 2” 20-545-XP Classic 33-154 B610-085
Everest & Everest 29 33-221
2” – 2 1/2” 20-546-XP Classic 33-154 B610-086
Everest & Everest 29 33-221
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
328
Price Book 6
Effective July 9, 2018
CYL-26
CYLINDERS • Deadbolts B600/700/800-Series
Non-IC Cylinders, Parts and Tailpieces
Tailpiece and Retainer Packs, B600/700/800-Series
Part
Number Description Price
Each
B610-041 B680 (non-keyed) $14.00
B610-042 B661, B664 Classic Conventional Non Modular 7.20
B610-043 B661, B664 Classic Conventional thick door Non Modular 7.20
B610-044 B660, B663 Classic Conventional Non Modular 7.20
B610-045 B662 Classic Conventional Non Modular 9.60
B610-046 B662 Classic Conventional thick door Non Modular 9.60
B610-082 B661, B664 Classic Conventional Modular 6.80
B610-083 B661, B664 Classic Conventional thick door Modular 8.20
B610-084 B660, B663 Classic Conventional Modular 13.20
B610-085 B662 Classic Conventional Modular 13.20
B610-086 B662 Classic Conventional thick door Modular 13.20
Miscellaneous Parts, B600/700/800-Series
Part
Number Description Price
Each
B520-298 Cylinder retaining screw 0.78
B600-070* 7/8" Collar (trim ring) for 1 5/8" – 2 1/2" door (standard) 60.50
B600-089* 1 1/8" Collar (trim ring) for 1 3/8" – 1 5/8" door 64.20
B600-090 Inside housing only (for B662, B762 & B862) 31.60
B600-092* Inside snap-on face plate 2.70
B610-024* Dummy cylinder faceplate and outside housing 49.90
B610-025* Housing, outside 31.60
B610-071 Washer 0.80
C603-098 Security disc (Order in multiples of 100) 0.36
* Specify finish: 605, 609, 612, 613, 625 and 626.
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
329
Price Book 6
Effective July 9, 2018
CYL-27
B600/700/800-Series
IC Housings and Parts Deadbolts • CYLINDERS
1/4-28 Bolts,
Angled Driver
1/4-28 Bolts
Full Size IC
Small Format IC
For pins, springs, etc.,
see CYL-50.
Miscellaneous Parts for B600/700-Series IC Cylinders
Part
Number Description Price
Each
B202-370 Tailpiece, B662BD 2.40
B202-453 Tailpiece, B662BD thick door 8.40
B202-557 Tailpiece, B660BD 2.40
B220-032 Tailpiece, B661BD 2.40
B600-089* 1 1/8" Collar, B600 all IC models 64.20
B520-240 Waldes retaining ring B662J (order in multiples of 100) 0.50
B600-029 Driver, B660/662J/663J 5.10
B610-032 Cotter pin for tailpiece, B660/662J/663J (1 = pack of 50) 41.70
B600-106 Driver, SFIC 16.40
B600-107 Throw member for SFIC models 3.00
B600-108 Waldes retaining ring B660/662BD (order in multiples of 100) 0.32
B610-014* Inside snap-on faceplate for SFIC double cylinder deadlocks 9.20
B610-031* Inside snap-on faceplate for full size IC double cylinder deadlocks 9.80
B610-040 Tailpiece and cotter pin, B662J 14.30
B610-041 Tailpiece and cotter pin, B660J, B661J, B663J 14.00
* Specify finish: 605, 609, 612, 613, 625, 626.
B600/700-Series IC Housings Less Core
Cylinder Type Housing Part Number* Price Each
Full Size
Interchangeable Core
Outside B660, B661, B663 B610-203*†
$60.00
Outside B662 B610-205 †
Inside B610-028 57.40
Small Format
Interchangeable Core
Outside B610-204*†
55.70
Inside B610-281
* Specify finish: 605, 609, 612, 613, 625, 626.
† For deadbolts purchased before 10/01/2012, also requires firecups B520-657.
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
330
Price Book 6
Effective July 9, 2018
CYL-28
Mortise Cylinders
Schlage L-Series (except L9060 outside)
Cam Description Cylinder Mechanism
Complete
Cylinder
Finishes Available:
605, 606, 609, 612, 613, 619, 622, 625, 626, 629, 630, 643e
Price Each
Open Restricted
L583-474
For cyl. length 1 1/8”,
1 3/8”, 1 5/8”
L583-475
For cyl. length 1 1/4”,
1 1/2”, 1 3/4”
Cylinder Only:
L & N Escutcheons
Standard 30-021 $72.00 $89.00
Primus Controlled Access 20-793 149.00
Primus XP Controlled Access 20-793-XP 149.00
Primus UL437 20-593 181.00
Primus XP UL437 20-593-XP 181.00
Hotel Function (Standard) 30-022I114.00 131.00
Cylinder With
Compression
Ring & Spring:
Rose Trim
Standard 30-001 83.00 100.00
Primus Controlled Access 20-787 158.00
Primus XP Controlled Access 20-787-XP 158.00
Primus UL437 20-587 189.00
Primus XP UL437 20-587-XP 189.00
Primus Lockout 20-717 214.00
Primus XP Lockout 20-717-XP 214.00
Primus UL437 Lockout 20-517 230.00
Primus XP UL437 Lockout 20-517-XP 230.00
Hotel Function (Standard) 30-002I119.00 136.00
L583-800
For cylinder length 1- 1/8"
L583-801
For cylinder length 1 -1/4"
For modular SL cylinders
introducted May 2016
Everest 29 SL
(R/B Keyways only) 91-062 100.00
Cylinder With
Compression Ring and
Spring: Rose Trim
Everest 29 SL Primus XP
(R/B Keyways only) 91-757-XP 158.00
Schlage L9060 Outside and Other Straight Cam Applications
L583-476
For cyl. length 1 1/8",
1 3/8", 1 5/8"
L583-477
For cyl. length 1 1/4",
1 1/2", 1 3/4"
Cylinder with compression
spring:
L & N Escutcheons
Standard 26-021 $74.00 $91.00
Primus Controlled Access 20-701 149.00
Primus XP Controlled Access 20-701-XP 149.00
Primus UL437 20-501 181.00
Primus XP UL437 20-501-XP 181.00
Cylinder With
Compression
Ring & Spring:
Rose Trim
Standard 20-001 83.00 100.00
Primus Controlled Access 20-700 158.00
Primus XP Controlled Access 20-700-XP 158.00
Primus UL437 20-500 189.00
Primus XP UL437 20-500-XP 189.00
Primus Lockout 20-715 214.00
Primus XP Lockout 20-715-XP 214.00
Primus UL437 Lockout 20-515 230.00
Primus XP UL437 Lockout 20-515-XP 230.00
Cylinder with Comp. Ring
& 1/8" Blocking Ring:
Adams Rite 2331
Standard
(available in 1-1/8" only)
20-002
92.00 109.00
L583-802
For cylinder length 1- 1/8"
For modular SL cylinders
introducted May 2016
Everest 29 SL
(R/B Keyways only) 91-051 100.00
L583-803
For cylinder length 1 -1/4"
Cylinder With
Compression Ring and
Spring: Rose Trim
Everest 29 SL Primus XP
(R/B Keyways only) 91-751-XP 158.00
Note: For inverted cams for dogging cylinders, add XQ11-949
Also for Schlage K-Series (discontinued), Falcon
®
non-deadbolt functions, Adams Rite
®
2331 deadlocks,Baldwin
®
mortise locks, Corbin Russwin
®
ML2242 inside and ML2255.
L583-274
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
YX
L583-275
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
YX
Dim. X = .261
Y = .644
Dim. X = .261
Y = .644
L583-274
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
YX
L583-275
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
YX
Dim. X = .261
Y = .644
Dim. X = .261
Y = .644
X
Y
DIM X = 0.35” DIM Y = 0.72”
DIM X = 0.35” DIM Y = 0.72”
X
Y
CYLINDERS • Mortise Conventional Cylinders
for L-Series Locks, Exit Devices
Cylinder Only Cylinder with Compression Ring & Spring
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
331
Price Book 6
Effective July 9, 2018
CYL-29
Mortise Cylinders (cont’d)
Cam Description Cylinder Mechanism Complete Cylinder
Price Each
Open Restricted
Adams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 Series
L583-446
For cyl. length 1 1/8",
1 3/8", 1 5/8"
L583-447
For cyl. length 1 1/4",
1 1/2", 1 3/4"
B502-944
Cylinders with these cams
incldue set screw pack
B220-050 for Adams Rite
locks.
Cylinder with compression
spring Standard 26-072 $72.00 $89.00
Cylinder With
3/8" Blocking Ring
Standard 20-013 83.00 100.00
Primus Controlled Access 20-706 158.00
Primus XP Controlled Access 20-706-XP 158.00
Primus UL437 20-506 189.00
Primus XP UL437 20-506-XP 18900
Cylinder With Compression
Ring and Spring
Primus Lockout 20-718 214.00
Primus XP Lockout 20-718-XP 214.00
Primus UL437 Lockout 20-518 230.00
Primus XP UL437 Lockout 20-518-XP 230.00
Adams Rite 4070 Series
B520-743
For cyl. length 1 1/8",
1 3/8", 1 5/8"
B520-744
For cyl. length 1 1/4",
1 1/2", 1 3/4"
Cylinder with compression
spring
Standard 26-073 $72.00 $89.00
Primus Controlled Access 20-708 149.00
Primus XP Controlled Access 20-708-XP 149.00
Primus UL437 20-508 189.00
Primus XP UL437 20-508-XP 189.00
Notes: Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $44.00. See Special Cylinders for 2" - 5" long cylinders.
1 1/8" (Dim = 118) cylinders are furnished unless otherwise specified. Cylinder lengths depend on function, trim and door thickness.
See page CYL-36 for required dimension.
Primus Lockout cylinders do not use the modular design see the cams for non-modular table on page 313 for the required cams
SL Cylinders available in 1 1/8" and 1 1/4" lengths only
Conventional Cylinders
for Adams Rite Locks Mortise • CYLINDERS
For keying in the field, order 10-piece Bulk Pack Cylinders.
Cylinders are sub-assembled to save time!
See CYL-5
Adams Rite MS 4500 & 4700, Lori 4500,
Corbin Russwin DL3000
L583-447
Adams Rite MS 4500 & 4700,
Lori 4500, Corbin Russwin DL3000
L583-446
YX
Dim. X = .19
Y = .57
Dim. X = .19
Y = .57
YX
YX
Adams Rite MS 4500 & 4700, Lori 4500,
Corbin Russwin DL3000
L583-447
Adams Rite MS 4500 & 4700,
Lori 4500, Corbin Russwin DL3000
L583-446
YX
Dim. X = .19
Y = .57
Dim. X = .19
Y = .57
YX
YX
Adams Rite 4070
B520-744
Adams Rite 4070
B520-743
YX
Dim. X = .33
Y = .63
Dim. X = .33
Y = .63
YX
Adams Rite 4070
B520-744
Adams Rite 4070
B520-743
YX
Dim. X = .33
Y = .63
Dim. X = .33
Y = .63
YX
Dim. X = .187
Y = .562
Y
X
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
332
Price Book 6
Effective July 9, 2018
Adams Rite MS, 4500 and 4700 Series; Lori 4500 and Corbin Russwin DL3000 Series
Cam Description Cylinder Mechanism Complete Cylinder
Price Each
Restricted
L583-773
For cylinder length 1-1/8"
For modular SL cylinders introduced
May 2016
Cylinder with 3/8"
Blocking Ring
Everest 29 SL
(R/B Keyways only) 91-060 $100.00
L583-774
For cylinder length 1-1/4"
Everest 29 SL Primus XP
(R/B Keyways only) 91-758-XP 158.00
Adams Rite 4070 Series Modular Cams
B520-788
For cylinder length 1-1/8"
For modular SL cylinders introduced
May 2016
Cylinder Only
Everest 29 SL
(R/B Keyways only) 91-061 $100.00
B520-789
For cylinder length 1-1/4"
Everest 29 SL Primus XP
(R/B Keyways only) 91-759-XP 158.00
Adams Rite MS, 4500 and 4700 Series; Lori 4500
and Corbin Russwin DL3000 Series
CYLINDERS • Mortise
CYL-30
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
333
Price Book 6
Effective July 9, 2018
Concealed Shell
L-Series Mortise • CYLINDERS
CYL-31
Concealed Shell Mortise Cylinders
Cam Description Cylinder Mechanism
Complete
Cylinder
Finishes Available: 606, 626
Price Each
Open Restricted
Schlage L-Series (except L9060 outside)
L583-254
Classic Standard
L583-153
Everest & Primus
Cylinder Only:
L Escutcheon
Standard 30-004 $92.00 $109.00
Primus Controlled Access 20-789 179.00
Primus XP Controlled Access 20-789-XP 17900
Primus UL437 20-589 212.00
Primus XP UL437 20-589-XP 212.00
Hotel Function
(Conventional) 30-005* 138.00
Schlage L9060 Outside
B502-191
Classic Standard
B502-948
Everest & Primus
Cylinder Only:
L Escutcheon
Standard 26-023 $92.00 $109.00
Primus Controlled Acess 24-767 179.00
Primus Controlled Acess-XP 24-767-XP 179.00
Primus UL437 24-567 212.00
Primus XP UL437 24-567-XP 212.00
* Specify hand for hotel function cylinders. Not available in Primus. Emergency keys must be ordered separately.
Notes: Prices apply to 1 1/8", 1 1/4" and 1 3/8". For 1 1/2", 1 5/8" and 1 3/4" add $44.00. Extended lengths are available. See Special Cylinders.
Everest hotel function cylinders are available 1 1/8", 1 1/4" and 1 3/8" only.
1 1/8" (Dim = 118) cylinders are furnished unless otherwise specied. Cylinder lengths depend on function, trim and door thickness.
See page CYL-36 for required dimension.
Finishes: 606 and 626.
Dim.
X = .252
Y = .638
Y
X
Dim.
X = .252
Y = .638
Y
X
Dim.
X = .338
Y = .71
Y
X
Dim.
X = .338
Y = .71
Y
X
Cams for Competitors’ Cylinders in Schlage Locks*
L583-197
Sargent and Yale non-IC (was XL11-758)
L583-198
Corbin Russwin non-IC (was XL11-545)
XL11-895
Corbin Russwin
* Sold separately only.
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
334
Price Book 6
Effective July 9, 2018
CYL-32
CYLINDERS • Mortise Non-IC Cams
and Dummy Cylinder
Cams Non Modular Cylinders
Part
Number Description Price
Each
B502-191 L9060 Straight Classic Standard $3.40
B502-292 Adams Rite MS Classic Standard 3.40
B502-380 Adams Rite 4070 Classic Standard 11.90
B502-944 Adams Rite MS Everest® & Primus® 3.40
B502-945 Adams Rite 4070 Everest & Primus 11.90
B502-948 L9060 Straight Everest & Primus 3.40
L583-153 L-Series Everest & Primus 3.40
L583-197 L-Series for Sargent and Yale non-IC cylinders 11.90
L583-198 L-Series for Corbin Russwin non-IC cylinders 11.90
L583-254 L-Series Classic Standard 3.40
XQ11-935* Inverted straight Everest and Primus (dogging) 5.30
XL11-895 L-Series for Corbin Russwin 11.90
B520-254 Cam for Falcon Exit Trim 11.90
* Subject to Specials discounting and extended factory lead time.
Cams - Modular Cylinders
Part
Number Description Price
Each
L583-476 L9060 for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" $3.00
L583-477 L9060 for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" 3.00
B520-743 Cam, Cylinder Mortise. A/R 4070 for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" 11.90
B520-744 Cam, Cylinder Mortise. A/R 4070 for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" 11.90
L583-446 Adams Rite MS for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" 3.00
L583-447 Adams Rite MS for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" 3.00
L583-474 L-Series for cylinder lengths 1-1/8", 1-3/8" and 1-5/8" 3.00
L583-475 L-Series for cylinder lengths 1-1/4", 1-1/2" and 1-3/4" 3.00
Dummy Cylinder
Part
Number Description Length Price
Each
38-070 Dummy cylinder only, less ring and cam 1 1/8", 1 1/4", 1 3/8", 1 1/2" $59.00
Note: 1) For thumbturn cylinders see page L-36.
Cam Screws For Non Modular Cylinders
Part
Number Description Price Each
(Order in multiples of 100)
B502-468 Classic Standard up to 1 3/8" $0.32
B502-942 Everest & Primus up to 1 3/8" 0.46
B502-943 Everest & Primus over 1 3/8" 0.64
B590-295 Classic Standard over 1 3/8" 0.46
Cam Screws For Modular Cylinders
Part
Number Description Price Each
(Order in multiples of 100)
B520-690 Camscrew, (5-40 x 1/2") for 1-1/8" & 1-1/4" cylinder length $0.22
B520-691 Camscrew, (5-40 x 3/4") for 1-3/8" & 1-1/2" cylinder length 0.42
B520-692 Camscrew, (5-40 x 1") for 1-5/8" & 1-3/4" cylinder length 0.54
Modular Cylinder Housing Screws
B520-693 Modular Housing Screw (8-32 x 7/8") $1.60
B590-295 Classic Standard over 1 3/8" 0.46
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
335
Price Book 6
Effective July 9, 2018
CYLINDERS • Mortise
Full Size Interchangeable Core
,
Full Size Interchangeable Core
Cam Description Cylinder Mechanism
Complete
Cylinder
Finishes Available:
605, 606, 609, 612, 613, 619,
622, 625, 626, 643e
Price Each
Open Restricted
Schlage L-Series (except L9060 outside)
L583-255 Housing Only Housing Less Core 30-016 $59.00
Cylinder With Compression
Ring & Spring: L & N
Escutcheons
Standard Core 30-008* 138.00 155.00
Everest 29 SL Core 91-163 155.00
Primus® Core 20-798 231.00
Primus® XP Core 20-798-XP 231.00
Everest 29 SL Primus XP Core 91-863-XP 231.00
Faculty Res. Function Core 30-010** 138.00
Housing Less Core 30-007 67.00
Cylinder With Compression
Ring, Spring &3/8” Blocking
Ring Rose Trim
Standard Core 30-138* 152.00 169.00
Everest 29 SL Core 91-169 169.00
Primus Core 20-776 247.00
Primus XP Core 20-776-XP 247.00
Everest 29 SL Primus XP Core 91-869-XP 247.00
Faculty Res. Function Core 30-140** 152.00
Housing Less Core 30-137 91.00
Schlage L9060 Outside
K510-680 Housing Only Housing Less Core 30-032 $59.00
Cylinder With Compression
Ring & Spring: L & N
Escutcheons
Standard Core 30-030* 138.00 155.00
Everest 29 SL Core 91-165 155.00
Primus Core 20-782 231.00
Primus XP Core 20-782-XP 231.00
Everest 29 SL Primus XP Core 91-865-XP 231.00
Cylinder With Compression
Ring, Spring & 1/2” Blocking
Ring Rose Trim
Primus Core 20-783 247.00
Primus XP Core 20-783-XP 247.00
Von Duprin, Monarch and Other Straight Cam Applications
K510-730 Housing Only Housing Less Core 20-059 $59.00
Cylinder With Compression
Ring & Spring
Standard Core 26-091* 138.00 155.00
Everest 29 SL Core 91-171 155.00
Primus Core 20-763 231.00
Primus XP Core 20-763-XP 231.00
Everest 29 SL Primus XP Core 91-871-XP 231.00
Also for Schlage K-Series (discontinued),
Falcon® non-deadbolt functions,
Von Duprin & Monarch exit devices, Adams
Rite® 2331 deadlocks, Baldwin® mortise
locks, Corbin Russwin® ML2242 inside and
ML2255, Best 30H latch function.
For dogging cylinders for Von Duprin exit
devices, specify complete cylinder (with
core) and XQ11-948.**** Available at no
additional charge.
Housing Only with
compression ring and spring
Housing Less Core 26-064 69.00
Cylinder With Compression
Ring, Spring & 3/8” Blocking
Ring
Standard Core 20-061* 153.00 170.00
Everest 29 SL Core 91-173 170.00
Primus Core 20-771 247.00
Primus XP Core 20-771-XP 247.00
Everest 29 SL Core 91-873-XP 247.00
Housing Less Core 26-094 80.00
* To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details.
** Specify hand for hotel function cylinders. Not available in Primus. Emergency key must be ordered separately.
*** For this configuration with standard full size interchangeable core, order 30-030 cylinder and 36-082-050 blocking ring.
**** Extended factory lead time.
Dim.
X = .338
Y = .778
Y
X
Dim.
X = .338
Y = .71
Y
X
Dim.
X = .252
Y = .638
Y
X
CYL-33
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
336
Price Book 6
Effective July 9, 2018
Full Size Interchangeable Core,
Cams and Parts
Mortise • CYLINDERS
For plugs, shells, pins, springs, etc.,
see CYL-51, CYL-52, CYL-53, CYL-55.
Dim.
X = .187
Y = .562
Y
X
Dim.
X = .323
Y = .627
Y
X
Full Size Interchangeable Core (cont’d)
Cam Description Cylinder Mechanism Complete Cylinder
Price Each
Open Restricted
Adams Rite MS, 4500, 4700 Series
K510-711 Cylinder Only Housing Less Core 20-060 $59.00
Cylinder With Compression
Ring & Spring Standard Core 26-098* 138.00 155.00
Everest 29 SL Core Housing Less Core 91-172 155.00
Cylinder With Compression
Ring, Spring 3/16” and 3/8”
Blocking Rings
Standard Core 20-062* 162.00 179.00
Cylinders with this cam include
set screw pack B220-050 for
Adams Rite locks.
Everest 29 SL Core 91-174 179.00
Primus® Core 20-766 262.00
Primus® XP Core 20-766-XP 262.00
Everest 29 SL Core 91-874-XP 262.00
Adams Rite 4070 Series
B520-378 Cylinder Only Housing Less Core 20-090 $59.00
Cylinder With Compression
Ring, Spring 3/16” and 3/8”
Blocking Rings
Standard Core 20-091* 162.00 179.00
Everest 29 SL Core 91-175 179.00
Primus Core 20-722 262.00
Primus XP Core 20-722-XP 262.00
Everest 29 SL Cor 91-175-XP 262.00
* To order with construction core, see Keys and Keying: Full Size Construction Core Program for additional details.
Note: 2 1/4” through 5” cylinders are available. See Special Cylinders CYL-51 for more information.
CYL-34
Interchangeable Core Cams
Part
Number Description Price
Each
B520-378 Adams Rite 4070 $11.90
K510-680 L9060 Outside 3.40
K510-711 Adams Rite MS 3.40
K510-730 Straight cam 3.40
L583-255 L-Series (except L9060 outside) 3.40
B520-698 Falcon Series MA Mortise Lock 12.40
K510-730 Cam for Falcon Exit Device Trims 3.40
Other Full Size IC Mortise Cylinder Parts
Part
Number Description Price
Each
L583-200 Cam screw (order in multiples of 100) $0.38
C604-334** Driver, universal 6.10
K510-474 Friction washer 2.70
** Will upgrade housings manufactured before March 1992 to accept Everest and Primus cores.
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
Price Book 6
Effective July 9, 2018 337
CYLINDERS • Mortise
Small Format Interchangeable Core
Small Format Interchangeable Core
Cam Description Cylinder Mechanism Complete Cylinder Price Each
Schlage L-Series (except L9060 outside)
L583-255
Cylinder With Compression
Ring & Spring:
L & N Escutcheons
Everest & Everest 29 Combinated Core 80-308 149.00
Construction Core Disposable 80-115 70.00
Keyed 80-138 105.00
Housing less Core 80-108 70.00
Cylinder With Compression
Ring & Spring: and 1/4”
Blocking Ring: Rose Trim
Everest & Everest 29 Combinated Core 80-301 153.00
Construction Core Disposable 80-109 79.00
Keyed 80-131 118.00
Housing less Core 80-101 79.00
Schlage L9060 Outside
K510-680
Cylinder With Compression
Ring & Spring:
L & N Escutcheons*
Everest & Everest 29 Combinated Core 80-304 149.00
Construction Core Disposable 80-112 70.00
Keyed 80-134 118.00
Housing less Core 80-104 70.00
Von Duprin, Monarch and Other Straight Cam Applications
K510-730
Cylinder With
Compression Ring, Spring &
1/4” Blocking Ring
Everest & Everest 29 Combinated Core 80-302 160.00
Construction Core Disposable 80-110 79.00
Keyed 80-132 84.00
Also for Schlage K-Series
(discontinued), Falcon®
non-deadbolt functions,
Von Duprin® exit devices, Adams
Rite® 2331 deadlocks, Baldwin®
mortise locks, Corbin Russwin®
ML2242 inside and ML2255. To
order dogging cylinders for Von
Duprin® and Monarch® exit devices,
specify complete cylinder (with
core) and XQ11-948**.
Available at no additional charge.
Housing less Core 80-102 79.00
* For rose trim also order 36-082-050 blocking ring.
** Extended factory lead time.
Dim.
X = .252
Y = .638
Y
X
Dim.
X = .338
Y = .778
Y
X
Dim.
X = .338
Y = .71
Y
X
CYL-35
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
338
Price Book 6
Effective July 9, 2018
Small Format Interchangeable Core,
Cams and Parts
Mortise • CYLINDERS
Dim.
X = .187
Y = .562
Y
X
Dim.
X = .323
Y = .627
Y
X
For pins, springs, etc.,
see CYL-50.
Small Format Interchangeable Core (cont’d)
Cam Description Cylinder Mechanism Complete Cylinder
Price Each
Open
Adams Rite MS, 4500 and 4700-Series
K510-711
Cylinder With
7/16” Blocking Ring
Everest & Everest 29 Combinated Core 80-303 $160.00
Construction Core Disposable 80-111 79.00
Keyed 80-133 118.00
Housing less Core 80-103 79.00
Adams Rite 4070 Series
B520-378
Cylinder With
Compression Ring, Spring &
1/4” Blocking Ring
Everest & Everest 29 Combinated Core 80-305 $160.00
Construction Core Disposable 80-113 79.00
Keyed 80-135 118.00
Housing less Core 80-105 79.00
Notes: Housing finishes: 605, 606, 609, 612, 613, 619, 625 and 626.
All SFIC cylinders with Adams Rite MS or 4070 cams are furnished with set screw pack B220-050.
Cylinder and Blocking Ring combinations are based on 1-3/4" door thickness.
CYL-36
Interchangeable Core Cams
Part
Number Description Price
Each
B520-378 Adams Rite 4070 $12.60
K510-680 L9060 Outside 3.50
K510-711 Adams Rite MS 3.50
K510-730 Straight cam 3.40
L583-255 L-Series (except L9060 outside) 3.40
Other Full Size IC Mortise Cylinder Parts
Part
Number Description Price
Each
B520-484 Cam screw (order in multiples of 100) $0.40
B520-483 Throw member (driver) 6.10
B220-050 Adams Rite set screw pack 2.70
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
339
Price Book 6
Effective July 9, 2018
CYLINDERS • Mortise
L-Series, LV-Series
Cylinder Length Reference Tables
How to Measure Mortise Cylinder Lengths, LV
Full Face and Interchangeable Core Concealed
LENGTH LENGTH
Dimensions for Mortise Cylinders
Cylinder Length Dimension
1 1/8" 118
1 1/4" 114
1 3/8" 138
1 1/2" 112
1 5/8" 158
1 3/4" 134
CYL-37
Cylinder and Length Requirements, L-Series
Function Trim Cylinder
Door Thickness
1 3/8" 1 3/4" 2" 2 1/4"
Dimension
L9050, L9056,L9070,
L9076,L9080, L9080EL/
EU, L9453, L9456, L9460
per XL11-886 or XL-635,
L9464 per XL11-886, L9465,
L9473,L9480
L460, L464, L9460, L9464 Rose 30-001 118
—Escutcheon 30-021 118 114 138 112
—
Concealed 30-004 118 114 138 112
L9485 per XL11-557 —
Rose 30-022 118
Escutcheon 30-022 —114 138 112
Concealed 30-005 —114 138 112
L9486 —
Rose 30-002 114 138 112 158
Escutcheon 30-022 118 114 138 112
Concealed 30-005 118 114 138 112
L9496 —
Rose 30-001 114 138 112 158
Escutcheon 30-021 118 114 138 112
Concealed 30-004 118 114 138 112
L9060, L9071, L9077, L9082,
L9082EL/EU*, L9457, L9462
per XL11-886, L9464, L9466,
L9482
L462, L463, L9462, L9463 Rose 30-001 118
— Escutcheon 30-001 114 ———
—30-021 —118 114 138
—Concealed 30-004 —118 114 138
L9060 Outside —
Rose 20-001 118
Escutcheon 20-001 114 ———
26-021 —118 114 138
Concealed 26-023 —118 114 138
Note: Blocking rings and/or compression rings may be required and must be ordered separately.
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
340
Price Book 6
Effective July 9, 2018
L-Series, LV-Series
Collar Reference Tables
Mortise • CYLINDERS
Full Size IC Cylinder Blocking Ring Requirements, L-Series, LV-Series
Function Trim
Door Thickness
1 3/8" 1 3/4" 2" 2 1/4"
Dimension
L9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453, L9456,
L9460 per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473,
L9480
Rose 050 037 025 025
Escutcheon 025 012 N/R N/R
L9485 per XL11-557 Rose —037 025 025
Escutcheon — 012 N/R N/R
L9486, L9496 Rose 012 N/R N/R N/R
Escutcheon 025 012 N/R N/R
L9060*, L9071*, L9077*, L9082*, L9457*, L9462* per XL11-886,
L9466*, L9482*
Rose —050 043 031
Escutcheon 025 012 N/R N/R
L460, L464, L9460, L9464 Rose 050 037 025 025
L462*, L463*, L9462*, L9463* Rose —050 043 031
Notes: Specify blocking ring (36-082), finish and dimension.
Blocking ring (36-082) must be used with compression ring (36-083).
N/R = None Required.
* 2 Blocking rings required.
Small Format IC Cylinder Blocking Ring Requirements, L-Series, LV-Series
Function Trim
Door Thickness
1 3/8" 1 3/4" 2" 2 1/4"
Dimension
L9050, L9056, L9070, L9076, L9080, L9080EL/EU, L9453, L9456, L9460
per XL11-886 or XL-635, L9464 per XL11-886, L9465, L9473, L9480
Rose 037 025 012 N/R
Escutcheon ** N/R N/R N/R N/R
L9060*, L9071*, L9077*, l9082*, L9082EL/EU*, L9457*, L9462* per XL11-886,
L9464*, L9466*, L9482*
Rose —050 037 025
Escutcheon 018 N/R N/R N/R
L9496 Rose 025 012 N/R N/R
Escutcheon N/R N/R N/R N/R
L460, L464, L496, L9460, L9464 Rose 037 025 012 N/R
L462*, L463*, L9462*, L9463* Rose —050 037 025
Notes: Specify blocking ring (36-082), finish and dimension.
Blocking ring (36-082) must be used with compression ring (36-083).
N/R =None Required.
* 2 Blocking rings required.
** Compression ring not required for doors over 1 9/16" thick.
Blocking and Compression Rings
Part
Number
Specify
Finish
Description Price
Each
36-079* • Blocking ring for use without compression ring $13.60
36-082* • Blocking ring for use with compression ring 11.80
36-083 • Compression ring and spring 9.80
L583-195 Compression ring spring 1.50
CYL-38
Dimensions for Blocking Rings
Blocking Ring Length Dimension
1/8" 012
3 /16" 018
1/4" 025
5/16" 031
3/8" 037
7/16" 043
1/2" 050
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
341
Price Book 6
Effective July 9, 2018
CYLINDERS
Allegion Compatible Cams
Allegion Compatible Cams
Description
Cams for Schlage Cylinders
Modular Cylinder
1 1/8", 1 3/8", 1 5/8
Modular Cylinder
1 1/4", 1 1/2", 1 3/4
Interchangeable Core
SFIC and FSIC
Classic Standard
Not available with
cylinder
Everest and Primus
non-IC
Not available with
cylinder
Schlage L-Series,
Except L9060 O/S L583-474 L583-475 L583-255 L583-254 L583-153
Schlage L9060 O/S L583-476 L583-477 K510-680 B502-191 B502-948
Schlage K-Series
(Discontinued) L583-476 L583-477 K510-730 B502-191 B502-948
Falcon M-Series
Non-deadbolt functions
(Discontinued)
L583-476 L583-477 K510-730 B502-191 B502-948
Falcon M-Series
Deadbolt functions
(Discontinued)
B520-738 B520-739 XB12-046 A09894-001-00* B502-907
Falcon MA-Series
except MA381 function L583-638 L583-639 B520-698 N/A N/A
Von Duprin mortise exit
device and Von Duprin
removable mullion
L583-476 L583-477 K510-730 B502-191 B502-948
Von Duprin mortise exit
device
with dogging
L583-476 L583-477 K510-730
PER XQ11-948 B502-191 B502-948
Glynn-Johnson HL-6,
except 9060 O/S L583-474 L583-475 L583-255 L583-254 l581-153
Glynn-Johnson HL-6
9060 O/S L583-476 L583-477 K510-680 B502-191 B502-948
Schlage CM5500, CM5600,
PRO5500, VIP5500, 650
Keyswitch
L583-476 L583-477 K510-680 B502-191 B502-948
Falcon 718C Trim
(Manufactured after
2/28/2011)
B520-730 B520-731 B520-254 B520-295 B520-366
Falcon 24/25 exit device
with trims
(except 718C and 718NL)
N/A N/A N/A A09897-024-00* A09897-024-00*
Falcon 24/25 exit device
with trims
(only 718C and 718NL)
Falcon #24 cam
N/A N/A N/A A09894-021-00* A09894-021-00*
* Falcon cam available through the Falcon price book.
Cam Price Cam Price Cam Price
B502-191 $3.40 K510-680 $3.10 L583-474
$3.00
B502-907 3.40 K510-730 3.20 L583-475
B502-948 3.40 L583-153 3.20 L583-476
B520-254 11.90 L583-254 3.10 L583-477
B520-698 12.20 L583-255 3.20 L583-638 11.10
B520-738 11.90 L583-639
B520-739 11.90 XB12-046 11.50
B520-740 OBSOLETE - USE
L583-476
B520-741 OBSOLETE - USE
L583-477
B520-295 11.80
CYL-39
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
342
Price Book 6
Effective July 9, 2018
Allegion Compatible Cams and Tailpieces
CYLINDERS
Falcon Retrofit Cylinder Reference Table
Side
View Lock Series
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway Type Plug Shell Tailpiece/
Cam
Open Restricted
B611, T381
IS & W,
all except 561
Standard 21-020 $62.00 $79.00 Classic 33-137 A508-652
A700-031
Everest & Everest 29 33-138
Primus
Primus XP
20-728
20-728-XP 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
20-528
20-528-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
T, all except
381 IS & 571
Standard 24-031 62.00 79.00 Classic 33-137 A508-652
030730-001*
Everest & Everest 29 33-138
Primus
Primus XP
24-761
24-761-XP 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
24-561
24-561-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
T571
Standard 24-032 62.00 79.00 Classic 33-137 A508-652
030730-002*
Everest & Everest 29 33-138
Primus
Primus XP
24-762
24-762-XP 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
24-562
24-562-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
W561, knobs
Standard 24-033 62.00 79.00 Classic 33-137 A508-652
Q330-252*
Everest & Everest 29 33-138
Primus
Primus XP
24-763
24-763-XP 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
24-563
24-563-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
W561, levers
Standard 24-034 62.00 79.00 Classic 33-137 A508-652
Q330-165*
Everest & Everest 29 33-138
Primus
Primus XP
24-764
24-764-XP 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
24-564
24-564-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
M
Standard 24-035 83.00 100.00 Classic 33-137 A508-652 See Cam
chart on
page
CYL-38 for
proper
cam
Everest & Everest 29 33-138
Primus
Primus XP
24-765
24-765-XP 158.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
24-565
24-565-XP 189.00 Classic 33-154
Everest & Everest 29 33-221
B, all except
Standard 23-013 62.00 79.00 Classic 33-137 A508-652
C604-243
Everest & Everest 29 33-138
Primus
Primus XP
20-750
20-750-XP 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL
Primus XP UL
20-550
20-550-XP 169.00 Classic 33-154
Everest & Everest 29 33-221
K
Standard 24-139 62.00 79.00 Classic 33-137 A508-653
A301-338
Everest & Everest 29 33-138
Primus
Primus XP 20-739 137.00 Classic 33-136
A508-655
Everest & Everest 29 33-119
Primus UL437
Primus XP UL437 20-539 169.00 Classic 33-154
Everest & Everest 29 33-221
H2 Standard 22-093 62.00 79.00 Classic 33-137 A508-652 F506-878/
B600-071
Everest & Everest 29 33-138
* These part numbers represent Falcon part numbers and are available to order through Falcon.
CYL-40
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
343
Price Book 6
Effective July 9, 2018
CYLINDERS • Rim
Complete Cylinders
Verticle Tailpiece (No. 1 bar) Horizontal Tailpiece (No. 2 bar)
Rim Cylinders
Type Cylinder Mechanism Tailpiece Complete
Finishes Available:
605, 606, 609, 612, 613, 619,
625, 626, 629, 630, 643e
Price Each
Open Restricted
Conventional
(non-IC)
Standard Horizontal 20-022 $79.00 $96.00
Vertical 20-021
Everest 29 SL
(R/B Keyways only)
Horizontal 91-075 96.00
Vertical 91-074
Primus Horizontal 20-710 154.00
Vertical 20-709
Primus XP Horizontal 20-710-XP 154.00
Vertical 20-709-XP
Everest 29 SL Primus XP
(R/B Keyways only)
Horizontal 91-775-XP 79.00 154.00
Vertical 91-774-XP
Primus UL437 Horizontal 20-510 193.00
Vertical 20-509
Primus XP UL437 Horizontal 20-510-XP 193.00
Vertical 20-509-XP
Lockout Primus
Horizontal
20-716 213.00
Primus XP 20-716-XP
Primus UL437 20-516
230.00
Primus XP UL437 20-516-XP
Thumbturn None Horizontal XB11-979
104.00
Notes Housing nishes: 605, 606, 609, 612, 613, 619, 625 and 626.
All items include collar, mounting screws and backplate.
Tailpiece orientation may be changed in the eld. For Von Duprin, Monarch and most other applications, tailpiece should be
horizontal.
To order less logo, specify:
“with K510-612 faceplate” for Conventional cylinder.
“with 23-031 core” for full size interchangeable core cylinder.
Conventional (non-IC) cylinders are available for application that is thicker than 3" ( combined door & device trim thickness) over
3" thick and available with special mounting screw locations for Sargent exit devices. See Special Cylinders CYL-51.
For keying in the field, order 10-piece
Bulk Pack Cylinders.
Cylinders are sub-assembled to save time!
See CYL-5
CYL-41
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
344
Price Book 6
Effective July 9, 2018
Parts
Rim • CYLINDERS
Rim Cylinder Parts
Part
Number Description
Price
Each
36-066 Collar, IC cylinders $8.80
B202-328 Screws and backplate pack 7.80
B220-001* Tailpiece & driver, full size IC 12.90
B502-200 Backplate 1.60
B502-209 Mounting screw 1.60
B502-310-604 Driver, Conventional (non-IC) cylinder 1.50
B502-899 Tailpiece, Conventional (non-IC) cylinder and SFIC housing 3.00
B520-153 Ring, cylinder, NL 8.70
B520-361* Tailpiece retainer, full size IC (order in multiples of 100) 0.34
B600-107 Throw member for SFIC models 3.00
* Not compatible with housings manufactured before July 1997.
For replacement of older parts, order housings less core (20-079).
For plugs, shells, pins, springs, etc.,
see CYL-50, CYL-52, CYL-53, CYL-55.
20-057
Rim Cylinders
Type Cylinder Mechanism Tailpiece Complete
Finishes Available:
605 606 609 612 613 619
622, 625 626 643e
Price Each
Open Restricted
Full Size
Interchangeable Core
Standard Core Convertible 20-057* $132.00 $149.00
Everest 29 SL Core 91-170 149.00
Primus Core 20-757 209.00
Primus XP Core 20-757-XP 209.00
Everest 29 SL Primus XP Core 91-870-XP 209.00
Housing only-less core
20-079 59.00
Small Format
Interchangeable Core
Everest & Everest 29 Combinated Core 80-329** 138.00
Keyed Construction Core
Horizontal
80-159*** 95.00
Disposable Construction Core 80-116 59.00
Housing only-less core
80-129 59.00
* To order with construction core, see Keys and Keying: Full Size Construction Core Program.
** Key symbol must be specified. Everest B and Everest 29 R Families keyways are restricted. See Terms & Conditions for more information.
*** Specify GRN for green or BRN for brown construction cores. A non-refundable handling charge (50-231) is assessed per core.
See Keys and Keying: Small Format Construction Core Program for details.
CYL-42
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
345
Price Book 6
Effective July 9, 2018
Full Size Core Parts
Part
Number Description
Price
Each
C503-115 Cap pin spring (Order in multiples of 100) $0.20
C503-118 Cap (Order in multiples of 25) 1.60
C603-827 Cap pin (Order in multiples of 100) 0.24
C603-956 Actuating ring 6.90
C603-964 Actuating pin (control top pin) 0.66
C603-967 Control bottom pin (Order in multiples of 100) 0.26
23446339 Driver, FSIC, AD-Series CY, MS, MD, 993R, 993 S, 993M 4.80
CYLINDERS • Interchangeable Cores
Full Size
23-031
For plugs, shells, pins, springs, etc.,
see CYL-50, CYL-52, CYL-53, CYL-55.
23-030
For keying in the
field, order 10-piece
Bulk Pack Cores.
Cores are sub-assembled
to save time!
See CYL-5
Full Size Cores
Description Part Number
Finishes Available:
606, 626
Price Each
Open Restricted
Standard core 23-030 $71.00 $88.00
Standard core less logo 23-031 71.00 88.00
Everest 29 SL core 91-161 88.00
Everest 29 SL core less logo 91-162 88.00
Primus core 20-740 148.00
Primus XP core 20-740-XP 148.00
Primus core less logo 20-741 148.00
Primus XP core less logo 20-741-XP 148.00
Everest 29 SL Primus XP core 91-861-XP 148.00
Everest 29 SL Primus XP core less logo 91-862-XP 148.00
Hotel function standard core for L9485 and L9486 30-120* 71.00 88.00
Hotel function standard core, less logo, for L9485 and L9486 30-121* 71.00 88.00
* Specify hand for hotel function cores. Emergency keys must be ordered separately.
Note: Control keys must be ordered separately.
CYL-43
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
346
Price Book 6
Effective July 9, 2018
Small Format
(Best® Style)
Interchangeable Cores • CYLINDERS
80-037
80-033
Everest® & Everest 29™ Patented Keyway Small Format Interchangeable Cores
Description
Part
Number
Price
Each
Everest combinated core, includes master keying 80-037 $82.00
Everest uncombinated core (Does not include keys, pins or springs) 80-036 54.00
Finishes: 606, 626 and 613 (simulated).
AD-Series Tailpiece for Small Format Core
Chassis Lever Design Description Tailpiece Price Each
CY, MS, MD
All
SFIC Driver 23446347 11.90
SFIC Driver, Spacer
(for 6 pins core)
and Instruction sheet
46929456 13.20
993R, 993S, 993M
Except ATH, 8AT
SFIC Driver N523-091 11.80
SFIC Driver, Spacer
(for 6 pins core)
and Instruction sheet
09-774 14.60
ATH, 8AT
SFIC Driver 23446347 11.80
SFIC Driver, Spacer
(for 6 pins core)
and Instruction sheet
46929456 13.20
For pins, springs, etc.,
see CYL-51.
Best® Keyway Small Format Interchangeable Cores
Description
Part
Number
Price
Each
7-Pin uncombinated, specify keyway 80-033 $37.00
6-Pin uncombinated, specify keyway 80-043 37.00
Notes: Finishes: 606 and 626.
Uncombinated cores are furnished less keys, pins and springs. Factory keying is not available.
Specify keyway using B sufx: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H,
JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB, TDB=TD, QB=Q.
CYL-44
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
347
Price Book 6
Effective July 9, 2018
CYLINDERS • Competitive Retrofit
Corbin Russwin and
Sargent Reference Table
Corbin Russwin® Retrot Cylinder Reference Table
Side View
Lock
Series
Cylinder
Mechanism
Price Each Complete
Cylinder Keyway Type Plug
(See CYL-53)
Shell
(See CYL-55) Tailpiece
Open Restricted
CL3300
Standard $62.00 $79.00 24-022 Classic 33-137 A508-653
N523-022
Everest & Everest 29 33-138
Everest 29 SL 79.00 91-020 Everest B & Everest 29 R 33-213 A508-660
Primus
Primus XP 137.00 20-762
20-762-XP
Classic 33-136 A508-655
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 137.00 91-720-XP Everest B & Everest 29 R 33-214 A508-661
Primus UL437
Primus XP UL437 169.00 20-562
20-562-XP
Classic 33-154 A508-655
Everest & Everest 29 33-221
CL3400
CL3600
Standard $62.00 $79.00 24-139 Classic 33-137 A508-653
A301-338
Everest & Everest 29 33-138
Everest 29 SL 79.00 91-027 Everest B & Everest 29 R 33-213 A508-660
Primus
Primus XP 137.00 20-739
20-739-XP
Classic 33-136 A508-655
Everest & Everest 29 33-119
Everest 29 SL
Primus XP 137.00 91-708-XP Everest B & Everest 29 R 33-214 A508-661
Primus UL437
Primus XP UL437 169.00 20-539
20-539-XP
Classic 33-154 A508-655
Everest & Everest 29 33-221
CK4200
UT5200
(since
1963)
Standard $62.00 $79.00 24-127 Classic 33-060 A201-690
None
Everest & Everest 29 33-232 A100-052
Primus
Primus XP 137.00 20-727
20-727-XP
Classic 33-081
A201-690
Everest & Everest 29 33-222
Primus UL437
Primus XP UL437 169.00 20-527
20-527-XP
Classic 33-080
Everest & Everest 29 33-223
Sargent® Retrot Cylinder Reference Table
Side View
Lock
Series
Cylinder
Mechanism
Price Each Complete
Cylinder Keyway Type Plug
(See CYL-53)
Shell
(See CYL-55) Tailpiece
Open Restricted
7L, 8L,
10 Line
Levers
Standard $62.00 $79.00 24-119 Classic 33-007 A201-849
C604-243
Everest & Everest 29 33-231 A100-050
Everest 29 SL 79.00 91-042 Everest B & Everest 29 R 33-219 A508-660
Primus
Primus XP 137.00 20-719
20-719-XP
Classic 33-163 A201-683
Everest & Everest 29 33-224
Everest 29 SL
Primus XP 137.00 91-742-XP Everest B & Everest 29 R
Primus UL437
Primus XP UL437 169.00 20-519
20-519-XP
Classic 33-162 A201-683
Everest & Everest 29 33-225
7, 8, 9
Line
Knobs
Standard $62.00 $79.00 24-120 Classic 33-007 A100-045
C303-437
Assembly
with cap
Everest & Everest 29 33-231 A100-049
Everest 29 SL 79.00 91-043 Everest B & Everest 29 R 33-219 A508-660
Primus
Primus XP 137.00 20-720
20-720-XP
Classic 33-163 A100-047
Everest & Everest 29 33-224
Everest 29 SL
Primus XP 137.00 91-743-XP Everest B & Everest 29 R
Primus UL437
Primus XP UL437 169.00 20-520
20-520-XP
Classic 33-162 A100-047
Everest & Everest 29 33-225
6 Line
Except
B Knob
Standard $62.00 $79.00 24-126 Classic 33-007 A100-046
C604-243
Everest & Everest 29 33-231 A100-050
Everest 29 SL 79.00 91-045 Everest B & Everest 29 R 33-219 A508-662
Primus
Primus XP 137.00 20-726
20-726-XP
Classic 33-163 A100-048
Everest & Everest 29 33-224
Everest 29 SL
Primus XP 137.00 91-745-XP Everest B & Everest 29 R
Primus UL437
Primus XP UL437 169.00 20-526
20-526-XP
Classic 33-162 A100-048
Everest & Everest 29 33-225
CYL-45
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
348
Price Book 6
Effective July 9, 2018
Yale Reference Table,
Tailpieces and Actuators
Competitive Retrofit • CYLINDERS
For pins, springs, etc.,
see CYL-51.
Tailpieces and Actuators
Part
Number
Locksets Price
Each
A301-043 Yale Levers $4.90
A301-338 Corbin Russwin
CL3400/CL3600 9.20
B520-409 Yale Knobs 30.60
C303-437 Sargent 7, 8, 9
(Assembly with cap) 13.40
C604-243 Sargent 6, 7L, 8L, 10 Line 1.80
Miscellaneous
Part
Number
Description Price
Each
A501-783 Blocking disc, Yale levers $5.10
B520-408 Sleeve, Yale cylinders 5.00
B520-407 Washer, Sargent 6.40
C607-062 Spacer, Corbin Russwin CL3300 3.60
Yale® Retrot Cylinder Reference Table
Side View
Lock
Series
Cylinder
Mechanism
Complete
Cylinder
Price Each Keyway Type Plug
(See CYL-53)
Shell
(See CYL-55) Tailpiece
Open Restricted
5300LN
5400LN
Levers
Standard 24-147 $62.00 $79.00 Classic 33-007 A201-849
A301-043
Everest & Everest 29 33-231 A100-050
Everest 29 SL 91-044 79.00 Everest B & Everest 29 R 33-219 A508-660
Primus
Primus XP
20-747
20-747-XP 137.00 Classic 33-163 A201-683
Everest & Everest 29 33-224
Everest 29 SL
Primus XP 91-744-XP 137.00 Everest B & Everest 29 R
Primus UL437
Primus XP UL437
20-547
20-547-XP 169.00 Classic 33-162 A201-683
Everest & Everest 29 33-225
5300,
5400,
6200
Series
Knobs
Standard 24-123 $62.00 $79.00 Classic 33-007 A201-849
B520-409
Everest & Everest 29 33-231 A100-050
Everest 29 SL 91-046 79.00 Everest B & Everest 29 R 33-219 A508-660
Primus
Primus XP
20-723
20-723-XP 137.00 Classic 33-163 A201-683
Everest & Everest 29 33-224
Everest 29 SL
Primus XP 91-746-XP 137.00 Everest B & Everest 29 R
Primus UL437
Primus XP UL437
20-523
20-523-XP 169.00 Classic 33-162 A201-683
Everest & Everest 29 33-225
CYL-46
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
349
Price Book 6
Effective July 9, 2018
CYLINDERS • Competitor Retrofit
Corbin Russwin
Master Ring Mortise
20-009, 20-505, 20-705
For old black cast iron case mortise locks only.
Bushing, Corbin Russwin Master Ring
Part
Number
Description Price
Each
B202-339 Reducing bushing and screws $97.30
Trim Collars Corbin Russwin Master Ring
Part Number Specify
Finish
Description Price
Each
38-033 • Trim collar $10.90
For plugs, shells, pins, springs, etc.,
see CYL-50, CYL-52, CYL-53, CYL-55.
Cams, Corbin Russwin Master Ring
Part Number Description Price Each
B502-486 Classic Standard - Non Modular Cylinders $33.70
B502-946 Everest & Primus - Non Modular Cylinders 39.60
XB11-825 Interchangeable core - Non Modular Cylinders 34.90
B520-728 Modular Cylinders (all keyways) length 1-1/8", 1-3/8", 1-5/8" 39.50
B520-729 Modular Cylinders (all keyways) length 1-1/4", 1-1/2", 1-3/4" 39.50
Mortise Cylinders, Corbin Russwin Master Ring
Cam Description Cylinder Mechanism
Complete
Cylinder
Price Each
Open Restricted
Corbin Russwin Master Ring
B502-946
Everest & Primus
B520-728
For cyl. length
1 1/8", 1 3/8", 1 5/8"
Master Ring
(includes bushing)
Standard 20-009 $201.00 $218.00
Primus Controlled Access 20-705 311.00
Primus XP Controlled Access 20-705-XP 311.00
B502-486
Classic Standard
B520-729
For cyl. length 1
1/4", 1 1/2", 1 3/4"
Primus UL437 20-505 20-505 344.00
Primus XP UL437 20-505-XP 344.00
Notes Prices apply to 1 1/8”, 1 1/4” and 1 3/8”. For 1 1/2”, 1 5/8” and 1 3/4” Primus add $44.00. For 1 1/2”, 1 5/8” and 1 3/4” Conventional add $11.50.
Finishes: 605, 606, 609, 612, 613, 625 and 626.
To order less Schlage logo specify cylinder “with K510-612 faceplate”.
Corbin Russwin Master Ring
B520-728
Corbin Russwin Master Ring
B520-729
Dim. X = .34
Y = .90
YX
Dim. X = .34
Y = .90
YX
Dim.
X = .328
Y = .893
YX
Dim.
X = .328
Y = .893
YX
Corbin Russwin Master Ring
B520-728
Corbin Russwin Master Ring
B520-729
Dim. X = .34
Y = .90
YX
Dim. X = .34
Y = .90
YX
CYL-47
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
350
Price Book 6
Effective July 9, 2018
Cams for Schlage
Competitor Retrofit • CYLINDERS
Cam and Cam Substitutions for Schlage Mortise Cylinders
to Operate Other Manufacturer's Locks
Modular Cylinder
(introduced in July 2010)
Interchangeable Core
FSIC & SFIC
Classic Standard
Non-IC
Everest, Primus
Non-IC
CAM Substitutions only
allowed on these cylinder
numbers:
Order Example:
20-001 X B210-731 626 S123
20-001, 20-002, 20-500,
20-501, 20-515, 20-700,
20-701, 20-715, 26-021
20-059, 20-061, 26-064,
20-763, 20-771, 26-091,
26-094, 80-302, 80-110,
80-132, 80-102
For Standard Pinned
Cylinders Manufactured
before
July 2010
Not Available with Cylinder
For Primus & Everest
Cylinders Manufactured
before
July 2010
Not Available with Cylinder
1 1/8", 1 3/8", 1 5/8" 1 1/4", 1 1/2", 1 3/4" N/A N/A N/A
Corbin Russwin®
DL4000 Series
(Old Corbin 420
and
Russwin 1503)
B520-730 B520-731 B520-254
(was XB11-426)
B520-295
(was XB11-458)
B520-366
(was XB11-656)
Corbin Russwin®
ML2200 Series
(Old Corbin 7000-9000
and
Russwin 4000-5000)
All functions except
ML2255 and
ML2242 inside
(see straight cam)
B520-732 B520-733 B520-253
(was XB11-352)
B520-233
(was XB08-899)
B520-309
(was XB11-629)
Corbin Russwin A65
ML2200 master ring
deadbolt functions
manufactured before
6/10/93 and
old Russwin cast iron
residential locks.
For all Best 40H Series
& 30H Deadbolt function
B520-734 B520-735 B520-360
(was XB11-817)
B520-223
(was XB03-142)
B520-367
(was XB11-887)
Yale®
2160
Arrow®
#004
Sargent®
13-0660
All functions
except 16 inside
and 50 outside
B520-736 B520-737 B520-296
(was XB11-461,
replaces XB11-484)
B520-256
(was XB11-430,
replaces XB10-659)
B520-329
(was XB11-631,
replaces XB11-630)
Best
30
Latch Function
L583-476 L583-477
K510-730 B502-191
Classic Standard
B502-948
Everest & Primus
Cam substitution with Cylinders shown above are No Charge Not available for substitution
Cam Price Cam Price Cam Price
B502-191 $3.40 B520-296
$11.90
B520-732
$11.90
B502-948 B520-309 B520-733
B520-223
11.90
B520-329 B520-734
B520-233 B520-360 B520-735
B520-253 B520-366 B520-736
B530-254 B520-367 B520-737
B520-256 B520-730 K510-730 3.40
B520-731
Dim.
X = .155
Y = .775
Y
X
Dim.
X = .232
Y = .729
Y
X
Dim.
X = .235
Y = .729
Y
X
Dim.
X = .186
Y = .718
Y
X
Dim.
X = .338
Y = .71
Y
X
Dim.
X = .338
Y = .71
Y
X
Dim.
X = .338
Y = .71
Y
X
B520-730
Corbin Russwin DL4000 Series
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-731
Corbin Russwin DL4000 Series
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Y
X
Dim. X = .153
Y = .761
Y
X
Dim. X = .153
Y = .761
B520-730
Corbin Russwin DL4000 Series
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-731
Corbin Russwin DL4000 Series
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Y
X
Dim. X = .153
Y = .761
Y
X
Dim. X = .153
Y = .761
B520-732
Corbin Russwin ML2200 Series
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-733
Corbin Russwin ML2200 Series
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Y
X
Dim. X = .236
Y = .731
Y
X
Dim. X = .236
Y = .731
B520-732
Corbin Russwin ML2200 Series
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-733
Corbin Russwin ML2200 Series
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Y
X
Dim. X = .236
Y = .731
Y
X
Dim. X = .236
Y = .731
B520-734
Corbin Russwin A65,
ML2200 master ring
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-735
Corbin Russwin A65,
ML2200 master ring
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Dim. X = .242
Y = .757
Dim. X = .242
Y = .757
Y
X
Y
X
B520-734
Corbin Russwin A65,
ML2200 master ring
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-735
Corbin Russwin A65,
ML2200 master ring
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Dim. X = .242
Y = .757
Dim. X = .242
Y = .757
Y
X
Y
X
B520-736
Yale 2160, Arrow 004,
Sargent 13-0660
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-737
Ya le 2160, Arrow 004,
Sargent 13-0660
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Dim. X = .187
Y = .727
Dim. X = .187
Y = .727
Y
X
Y
X
B520-736
Yale 2160, Arrow 004,
Sargent 13-0660
For housing sizes: 1¹⁄₈, 1³⁄₈, 1⁵⁄₈"
B520-737
Ya le 2160, Arrow 004,
Sargent 13-0660
For housing sizes: 1¹⁄₄, 1¹⁄₂, 1³⁄₄"
Dim. X = .187
Y = .727
Dim. X = .187
Y = .727
Y
X
Y
X
X
Y
DIM X = 0.35” DIM Y = 0.72” DIM X = 0.35” DIM Y = 0.72”
X
Y
CYL-48
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
351
Price Book 6
Effective July 9, 2018
CYLINDERS • Competitor Retrofit
Competititor Cams for SL Modular Cylinder
CAM Substitutions only allowed
on these cylinder numbers:
Order Example:
91-051 X B520-780 626 R123
91-051 118 91-051 114
1 1/8" 1 1/4"
Corbin Russwin® DL4000 Series
(Old Corbin 420 and Russwin 1503)
B520-780 B520-781
Corbin Russwin® ML2200 Series
(Old Corbin 7000-9000 and
Russwin 4000-5000)
All functions except ML2255 and
ML2242 inside (see straight cam)
B520-782 B520-783
Corbin Russwin A65 ML2200 master
ring deadbolt functions manufactured
before 6/10/93 and old Russwin
cast iron residential locks.
For all Best 40H Series
& 30H Deadbolt function
B520-784 B520-785
Yale® 2160
Arrow® #004
Sargent® 13-0660
All functions except 16 inside
and 50 outside
B520-786 B520-787
Best 30 Latch Function L583-802 L583-803
Cam Price
B520-780
$11.90
B520-781
B520-782
B520-783
B520-784
B520-785
B520-786
B520-787
L583-802
L583-803
Cams for Schlage
CYL-49
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
352
Price Book 6
Effective July 9, 2018
CYL-50
CYLINDERS • Mail Box
20-033
20-030 20-001
20-067 20-066 20-069
Letter/Mail Box Cylinders and Application Table
Description Keyway Type
Cam
(See Below)
Plug
(See CYL-55)
Shell
(See CYL-57)
Complete
Cylinder
Complete Cyl. Price
Open Restricted
American Device Classic C604-268 33-616 C203-726 20-066
$93.00 $110.00
Everest & Everest 29 C604-268 33-234 A100-051
Auth, 466, 470, 480 Series Classic C604-269 33-616 C203-726 20-067
Everest & Everest 29 C604-269 33-234 A100-051
Bommer vertical mail box Classic L583-476 33-137 N/A 20-001-118 83.00 100.00
Everest & Everest 29 L583-476 33-138 N/A
Bommer & Florence, Cutler Mail
Chute, Federal Equipment
Classic C604-269 33-616 C203-726 20-069
93.00 110.00
Everest & Everest 29 C604-269 33-234 A100-051
Corbin Wood Products Classic C604-271 33-616 C203-726 20-033
Everest & Everest 29 C604-271 33-234 A100-051
Dura Steel Classic C604-088 33-806 A508-653 20-030
Everest & Everest 29 C604-419 33-233
Notes: Finishes: 606 and 626. 20-001 also available 605, 612, 613 and 625.
Federal law prohibits the master keying of a letter box cylinder.
Miscellaneous Parts
Part
Number
Description Price
Each
C604-088 Cam, 20-030 Classic $35.10
C604-089 Bracket, 20-030 26.20
C604-226 Screw, 2 req’d, 20-033, 20-066,
20-067, 20-069 (order mult. of 100) 0.26
C604-234 Washer, 2 req’d, 20-033, 20-066,
20-067, 20-069 (order mult. of 100) 0.26
C604-268 Cam, 20-066 23.20
C604-269 Cam, 20-067, 20-069 23.20
C604-271 Cam, 20-033 28.40
C604-419 Cam, 20-030 Everest 35.30
Miscellaneous Parts
Part
Number
Description Price
Each
B502-468 Screw, 2 required, 20-030 Classic
(order multiples of 100) $0.32
B502-942 Screw, 20-030 Everest
(order multiples of 100) 0.46
C503-346 Spacer, 20-033, 20-066,
20-067, 20-069 1.50
C604-050 Mounting bracket, 20-033 13.30
C604-051 Screw post, 2 req’d, 20-033 1.90
C604-052 Screw, 2 req’d, 20-033 2.60
C604-053 Lock washer, 2 req’d, 20-033 2.60
For pins, springs, etc.,
see CYL-50.
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
353
Price Book 6
Effective July 9, 2018
CYL-51
Cylinders,
Non-Standard Finishes Special • CYLINDERS
Special Cylinders
6 Extended Factory Lead Time
“X”
Number
Description Price
Each
Extra Long Mortise Cylinders
XB03-418 Mortise cylinder (20-001, 30-001 or 30-004), 1 7/8" – 5" long Classic, Everest or Everest 29 $559.00
XB11-475*
Full size IC mortise cylinder (26-091 or 30-008), 2 1/4" – 5" long Classic, Everest or Everest 29 766.00
Primus full size IC mortise cylinder (20-763 or 20-798), 2 1/4" – 5" long 1,019.00
Full size IC mortise cylinder housing less core (20-059 or 30-007) 2 1/4" – 5" long 673.00
XB11-638 Primus mortise cylinder (20-700, 20-787 or 20-789), 1 7/8" – 5" long 779.00
Mortise Cylinder with Switch
XB09-195 Mortise cylinder (20-001) with “on” and “off” switch for key controlled electrical circuits, standard $593.00
XB09-795 Same as XB09-195, but double position, Classic Standard only (no master keying available) 794.00
XQ11-804 Primus mortise cylinder (20-700) with “on” and “off” switch for key controlled electrical circuits 807.00
Rim Cylinders
XB04-618
Conventional standard pinned cylinder (20-021 or 20-022) for doors over 3" thick
Insure device/ trim thickness is included in addition to door thickness $702.00
Primus cylinder (20-710) for doors over 3" thick
Insure device/ trim thickness is included in addition to door thickness 779.00
XB11-789 Conventional standard pinned cylinder (20-022) with mounting holes for Sargent® exit device 133.00
XB11-790 Primus cylinder (20-710) with mounting holes for Sargent® exit device 272.00
XB11-958
Full size IC, Standard core (20-057) for doors over 3" thick
Insure device/ trim thickness is included in addition to door thickness 732.00
Full size IC, Primus core (20-757) for doors over 3" thick
Insure device/ trim thickness is included in addition to door thickness 984.00
Full size IC, housing less core (20-079) for doors over 3" thick
Insure device/ trim thickness is included in addition to door thickness 639.00
* Available in 1/4" increments. Order collars or blocking rings separately to fill any gaps.
Note: If you are unable to find your required hardware solution in this price book, please use the Schlage Innovation Center Process in the
Forms and Example section.
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
354
Price Book 6
Effective July 9, 2018
CYL-52
CYLINDERS • Parts Pins & Springs
Full Size Cylinders
Ordering
Shaded prices are
specified in unit
quantities
(per piece) and must
be ordered in multiples.
Example:
Order 100 34-300,
Receive 1 bag of 100
pins. Price = $8.00
Original Manufacturer Nickel Silver
Pins-Full Size Cylinders
Description
Part
Number Type Size
Price
Each
34-101
Top pins
#1
Order in
multiples of 100
$0.08
34-102 #2
34-103 #3
34-202
Master pins
#2
34-203 #3
34-204 #4
34-205 #5
34-206 #6
34-207 #7
34-208 #8
34-209 #9
34-300
Bottom pins
#0
34-301 #1
34-302 #2
34-303 #3
34-304 #4
34-305 #5
34-306 #6
34-307 #7
34-308 #8
34-309 #9
34-007 Everest &
Everest 29
check pin
—Order in
multiples of 50
1.60
Primus® Finger Pins and Sidebars
Part
Number Description
Price
Each
34-001 Finger pin #1
Order in
multiples of 100
$1.00
34-002 Finger pin #2
34-003 Finger pin #3
34-004 Finger pin #4
34-005 Finger pin #5
34-006 Finger pin #6
34-058 Finger pin #7
C603-950 Sidebar 3.90
Construction Balls, RCK
Part
Number Description
Price
Each
34-401 Pack of 1,000 ball bearings $32.00
Springs
Part
Number Description
Price
Each
C503-113 Pin tumbler spring (including Primus) Order in
multiples of 100
$0.20
C503-115 Cap retainer pin spring (including Primus)
C603-951 Primus finger pin spring and Everest check pin spring
C603-952 Primus sidebar spring
Ward Rings
Part
Number Description
Price
Each
K510-045 Stop ring for hotel function Everest & Everest 29 mortise cylinders 3.60
K510-434 Stop ring for hotel function Classic mortise cylinders 3.60
Cap and Cap Pin
Part
Number Description
Price
Each
C503-116* Cap pin (non-IC)
Order in
multiples of 100
$0.20
C503-118* Cap
Order in
multiples of 25
1.50
C603-827 Full Size IC Cap Pin
Order in
multiples of 100
0.22
* See CYL-13 for KC-Series cap and cap pin
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
355
Price Book 6
Effective July 9, 2018
CYL-53
Ordering
Shaded prices are
specified in unit
quantities
(per piece) and must
be ordered in multiples.
Example:
Order 100 34-300,
Receive 1 bag of 100
pins. Price = $8.00
Pins & Springs
Small Format Interchangeable Cores Parts • CYLINDERS
SFIC Caps
Part Number Description Price Each
34-952 21C Cap
Order in
multiples of 500
$0.08
SFIC Plug Retainer
Part Number Description Price Each
C603-936 Plug retainer
Order in
multiples of 20
$1.80
Note: SFIC plug retainer is compatible with SFIC Everest products manufactured after
October 18, 2002.
SFIC Springs
Part Number Description Price Each
C504-114 20S Tumbler spring Order in
multiples of 500
$0.08
C504-116 Everest & Everest 29
check spring pin
Order in
multiples of 100
0.20
Original Manufacturer Nickel Silver Pins
Description
Part Number Type Size PriceEach
34-902
Master/
build-up/
top pins
#2B
Order in
multiples of 100
$0.10
34-903 #3B
34-904 #4B
34-905 #5B
34-906 #6B
34-907 #7B
34-908 #8B
34-909 #9B
34-910 #10B
34-911 #11B
34-912 #12B
34-913 #13B
34-914 #14B
34-915 #15B
34-916 #16B
34-917 #17B
34-918 #18B
34-919 #19B
34-800
Bottom pins
#0A
34-801 #1A
34-802 #2A
34-803 #3A
34-804 #4A
34-805 #5A
34-806 #6A
34-807 #7A
34-808 #8A
34-809 #9A
34-950 Everest & Everest 29
check pin –1.60
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
356
Price Book 6
Effective July 9, 2018
Pins & Springs
Full Size Cylinders
Parts • CYLINDERS
L Pins For SL Cylinders
Part Number Description Price Each
90-200 L-PIN, 0
$1.00
90-201 L-PIN, 1
90-202 L-PIN, 2
90-203 L-PIN, 3
90-204 L-PIN, 4
90-205 L-PIN, 5
90-206 L-PIN, 6
90-207 L-PIN, 7
90-208 L-PIN, 8
90-209 L-PIN, 9
90-200-2 L-PIN, MASTER, 0,2
90-200-4 L-PIN, MASTER, 0,4
90-200-6 L-PIN, MASTER, 0,6
90-200-8 L-PIN, MASTER, 0,8
90-201-3 L-PIN, MASTER, 1,3
90-201-5 L-PIN, MASTER, 1,5
90-201-7 L-PIN, MASTER, 1,7
90-201-9 L-PIN, MASTER, 1,9
90-202-4 L-PIN, MASTER, 2,4
90-202-6 L-PIN, MASTER, 2,6
90-202-8 L-PIN, MASTER, 2,8
90-203-5 L-PIN, MASTER, 3,5
90-203-7 L-PIN, MASTER, 3,7
90-203-9 L-PIN, MASTER, 3,9
90-204-6 L-PIN, MASTER, 4,6
90-204-8 L-PIN, MASTER, 4,8
90-205-7 L-PIN, MASTER, 5,7
90-205-9 L-PIN, MASTER, 5,9
90-206-8 L-PIN, MASTER, 6,8
90-207-9 L-PIN, MASTER, 7,9
Order single cut and master L pins in multiples of 100
90-201-3-5 L-PIN, CROSS-KEY, 1,3,5
1.00
90-201-3-7 L-PIN, CROSS-KEY, 1,3,7
90-201-3-9 L-PIN, CROSS-KEY, 1,3,9
90-201-5-7 L-PIN, CROSS-KEY, 1,5,7
90-201-5-9 L-PIN, CROSS-KEY, 1,5,9
90-201-7-9 L-PIN, CROSS-KEY, 1,7,9
90-203-5-7 L-PIN, CROSS-KEY, 3,5,7
90-203-5-9 L-PIN, CROSS-KEY, 3,5,9
90-203-7-9 L-PIN, CROSS-KEY, 3,7,9
90-205-7-9 L-PIN, CROSS-KEY, 5,7,9
90-201-3-5-7 L-PIN, CROSS-KEY, 1,3,5,7
90-201-3-5-9 L-PIN, CROSS-KEY, 1,3,5,9
90-201-5-7-9 L-PIN, CROSS-KEY, 1,3,7,9
90-203-5-7-9 L-PIN, CROSS-KEY, 3,5,7,9
90-201-3-5-7-9 L-PIN, CROSS-KEY, 1,3,5,7,9
90-200-2-4 L-PIN, CROSS-KEY, 0,2,4
90-200-2-6 L-PIN, CROSS-KEY, 0,2,6
90-200-2-8 L-PIN, CROSS-KEY, 0,2,8
90-200-4-6 L-PIN, CROSS-KEY, 0,4,6
90-200-4-8 L-PIN, CROSS-KEY, 0,4,8
90-200-6-8 L-PIN, CROSS-KEY, 0,6,8
90-202-4-6 L-PIN, CROSS-KEY, 2,4,6
90-202-4-8 L-PIN, CROSS-KEY, 2,4,8
90-202-6-8 L-PIN, CROSS-KEY, 2,6,8
90-204-6-8 L-PIN, CROSS-KEY, 4,6,8
90-200-2-4-6 L-PIN, CROSS-KEY, 0,2,4,6
90-200-2-4-8 L-PIN, CROSS-KEY, 0,2,4,8
90-200-2-6-8 L-PIN, CROSS-KEY, 0,2,6,8
90-202-4-6-8 L-PIN, CROSS-KEY, 2,4,6,8
90-200-2-4-6-8 L-PIN, CROSS-KEY, 0,2,4,6,8
Order cross-key L pins in multiples of 25
Springs For SL Cylinders
Part Number Description Price Each
C604-472 SPRING, LOCKING SIDEBAR
$0.22
C603-952 END CAP PIN SPRING
C603-951 L PIN SPRING
C604-472 CHECK PIN SPRING
Order in multiples of 100
End Cap and End Cap Pin For SL
Part Number Description Price Each
90-211 END CAP $ 1.70
90-002 END CAP PIN 0.22
Order in multiples of 50
Cylinder Parts For SL
Part Number Description Price Each
90-210 LOCKING SIDE BAR $4.20
C604-471 RETAINING CLIP 0.60
34-950 CHECK PIN, EVEREST B,
EVEREST 29 R 1.70
90-212 TOP COVER 0.12
Order in multiples of 50
CYL-54
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
357
Price Book 6
Effective July 9, 2018
CYLINDERS • Parts
Plugs for Modular Housing.
Modular Housing Interchangeability
Housing Cam Cam Screw Plug Extension
Part Number Size Part Number
B520-721 1-1/8" L583-474 B520-690 –
B520-722 1-1/4" L583-475 B520-690 –
B520-723 1-3/8" L583-474 B520-691 B590-298
B520-724 1-1/2" L583-475 B520-691 B590-298
B520-725 1-5/8" L583-474 B520-692 B590-299
B520-726 1-3/4" L583-475 B520-692 B590-299
Modular Key-In-Knob Cylinder
Modular Rim Cylinder
Modular Mortise Cylinder
1³⁄₈"
1¹⁄₂"
1⁵⁄₈"
1³⁄₄"
1¹⁄₈" housing
1¹⁄₄"
Plug Extension
B590-299
Plug Extension
B590-298
Cam
L583-474 or
L583-475
Cam
L583-474 or L583-475
Cam
L583-474 or L583-475 Cam Screw, 1”
B520-692
Cam Screw, ³⁄₄”
B520-691
Cam Screw, ¹⁄₂”
B520-690
B520-726 1³⁄₄”L583-475 B520-692 B590-299
CYL-55
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
358
Price Book 6
Effective July 9, 2018
Plugs for Key-in-Knob/Lever, etc.
Parts • CYLINDERS
Plugs, Key-in-Knob/Lever, Deadlock and Mail Box
Part
Number Description
Price
Each
33-005* 5-Pin (except F51 and F80), C, CE, E and F keyways only
$39.20 33-137 6-Pin Classic Standard
33-007 Sargent & Yale, Classic Standard
33-059* 5-Pin, F, FA-Series Knobs, BEL, GEO, PLY, AND, DNB (C keyway only) 26.30
33-059-149* 5-Pin, F-Series Knobs, ORB, C keyway only
33-060 Corbin Russwin CK4200, UT5200 Classic Standard 39.50
33-065* 5-Pin, F, FA-Series Levers, ACC, AVA, FLA, CLT, CHP, STA (C keyway only) 26.40
33-080 Corbin Russwin CK4200, UT5200 Classic Primus UL437 / Classic Primus XP UL437 98.70
33-081 Corbin Russwin CK4200, UT5200 Classic Primus / Classic Primus XP 70.20
33-119 Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 73.60
33-154 Classic Primus UL437 / Classic Primus XP UL437 94.80
33-136 Classic Primus / Class Primus XP 73.60
33-162 Sargent & Yale, Classic Primus UL437 / Classic Primus XP UL437 98.70
33-163 Sargent & Yale, Classic Primus / Classic Primus XP 70.70
33-167 B600 Plug, Classic 48.00
33-186 B600 Plug, Everest 51.70
33-213 PLUG, CYL, KIK, SL, 7-PIN 41.60
33-214 PLUG, CYL, KIK, SL, 7-PIN, PRIMUS 73.60
33-216 6-pin Classic, hotel function 55.70
33-221 Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 98.70
33-222 Corbin Russwin CK4200, UT5200, Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 10.70
33-223
Corbin Russwin CK4200, UT5200, Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437
98.70
33-224 Sargent & Yale, Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 70.70
33-225 Sargent & Yale, Everest Primus UL437/Everest Primus XP UL437 & Everest 29 Primus UL437/ Everest 29 Primus XP UL437 98.70
33-138 Everest & Everest 29 Standard
41.60
33-231 Sargent & Yale, Everest & Everest 29 Standard
33-232 Corbin Russwin CK4200, UT5200, Everest & Everest 29 Standard
33-233 Mail box 20-030 Everest & Everest 29 Standard
33-234 Mail box 20-033, 20-066, 20-067, 20-069 Everest & Everest 29 Standard
33-235 Everest & Everest 29 hotel function 55.70
33-616 Mail box 20-033, 20-066, 20-067, 20-069 Classic Standard 41.70
33-806 Mail box 20-030 Classic Standard
Notes: Specify finish: 606 (430 for F-Series Knobs & Levers) and 626 (429 for F-Series Knobs & Levers).
* These plugs are pre-drilled for lost ball construction keying (33-005 is pre-drilled in C keyway only).
Modular Cylinders Plugs-Key In lever/ Knob
Part
Number Description
Price
Each
33-137 6 Pins, Plug, Classic $39.20
33-138 6 Pins, Plug, Everest 41.60
33-136 6 Pins, Plug, Classic Primus / Primus XP 73.60
33-119 6 Pins, Plug, Everest Primus / Primus XP 73.60
Plugs, Full Size Interchangeable Core
Part
Number Description
Price
Each
33-058* Classic Standard $43.00
33-133 Everest & Everest 29 Standard hotel function
33-139 Everest Primus / Everest Primus XP and Everest 29 Primus / Everest 29 Primus XP 74.20
33-160 Classic Primus / Classic Primus XP
33-236 Everest & Everest 29 Standard 58.60
Notes: Specify 606 or 626 finish.
IC cap pins and cap pin springs must be ordered separately.
* For L-Series Classic hotel cylinders, specify “warded.”
CYL-56
CL-SeriesKeysCYLINDERS / KEYS / AUXILIARY
359
Price Book 6
Effective July 9, 2018
CYLINDERS • Parts
Shells/ bodies
Key in Lever/ Knob -Modular Cylinders Type
Part Number Description Price Each
A508-653 6 Pin, Body & Cover, Classic, Everest, Everest 29 $30.80
A508-655 6 Pin, Body & Cover, Primus/Primus XP 58.00
33-213 PLUG, CYL, KIK, SL, 7-PIN 41.60
33-214 PLUG, CYL, KIK, SL, 7-PIN, PRIMUS 73.60
Back Housings-Modular Cylinder
Part Number Description Price Each
B520-721 Back Housing, Mortise 1-1/8” 8.60
B520-722 Back Housing, Mortise 1-1/4” 8.60
B520-723 Back Housing, Mortise 1-3/8” 8.60
B520-724 Back Housing, Mortise 1-1/2” 34.40
B520-725 Back Housing, Mortise 1-5/8” 34.40
B520-726 Back Housing, Mortise 1-3/4” 34.40
B520-727 Back Housing, Rim 8.60
K110-480 316 Front housing 643e nish 8.60
K110-480 605 Front housing 605 nish 8.60
K110-480 606 Front housing 606 nish 8.60
K110-480 609 Front housing 609 nish 8.60
K110-480 612 Front housing 612 nish 8.60
K110-480 613 Front housing 613 nish 11.50
K110-480 619 Front housing 619 nish 8.60
K110-480 622 Front Housing 622 nish 8.60
K110-480 625 Front housing 625 nish 8.60
K110-480 626 Front housing 626 nish 5.90
K110-480 629 Front housing 629 nish 8.60
K110-480 630 Front housing 630 nish 8.60
Order in Multiples of 100
B520-690 Screw, Cam , 5-40 X 1/2” (for modular cylinders length 1 1/8” & 1 1/4”) 0.24
B520-691 Screw, Cam , 5-40 X 3/4” (for modular cylinders length 1 3/8” & 1 1/2”) 0.44
B520-692 Screw, Cam , 5-40 X 1”(for modular cylinders length 1 5/8” & 1 3/4”) 0.58
B520-693 Modular cylinder housings screws, 8-32 X 7/8” 1.70
B590-298 Plug extension 1-3/8”, 1-1/2” 2.60
B590-299 Plug extension 1-5/8”, 1-3/4” 2.60
Ordering
Shaded prices are
specified in unit
quantities
(per piece) and must
be ordered in multiples.
Example:
Order 100 B520-690,
Receive 1 bag of 100
cam screws. Price = $18.00
CYL-57
CL-Series Keys CYLINDERS / KEYS / AUXILIARY
360
Price Book 6
Effective July 9, 2018
Parts • CYLINDERS
Shells, Key-in-Knob/Lever, Deadlock and Mail Box
Part
Number Description
Price
Each
A100-049 Sargent 8 Line Everest & Everest 29 Standard
$35.60
A100-050 Sargent 6 Line Everest & Everest 29 Standard
A100-051
Mail box 20-033, 20-066, 20-067, 20-069 Everest & Everest 29
Standard
C203-726
Corbin Russwin CK4200, UT5200 Everest & Everest 29
Standard
A508-655 6-Pin, Body & Cover, Primus / Primus XP 63.20
A201-690 Corbin Russwin CK4200, UT5200 Primus / Primus XP 61.90
A201-691 Corbin Russwin CK4200, UT5200 Classic Standard
30.80
A508-653
6 Pin, Body & Cover, Classic/Classic, Everest, Everest 29
A201-848 5-Pin Classic (except F-Series Knobs & Levers)
A100-045 Sargent 8 Line Classic Standard
A100-046 Sargent vertical Standard
A100-047 Sargent 8 Line Primus® / Primus XP 63.20
A100-048 Sargent vertical Primus / Primus XP
C203-726 Mail box 20-033, 20-066, 20-067, 20-069 Classic Standard 35.60
Shells, Interchangeable Core
Part
Number Specify Finish Description
Price
Each
B220-006 • Everest & Everest 29 Standard $35.60
B220-117 •
Everest
&
Everest 29 hotel function, Schlage logo
B220-280 • Primus / Primus XP 72.40
B220-282 • 6-Pin Classic Standard (except hotel function) 34.30
B220-284 • Classic hotel function, Schlage logo
Note: Finishes: 606 and 626 only.
CYL-58
Modular Cylinders Mortise and Rim Cylinders Components & Service Kits
Part
Number Description
Price
Each
09-992
Service kit- Back Housing for 1 1/8" length
$8.70 Back Housing B520-721 Mortise 1 1/8", 2 Housing screws B520-693, cam screw B520-690
Order front housing and cam separately
09-993
Service kit-Back Housing for 1 1/4" length
10.10B520-722 Mortise 1 1/4", 2 Housing screws B520-693, cam screw B520-690
Order front housing and cam separately
09-994
Service kit -back housing for 1 3/8" length
15.90B520-723 Back Housing Mortise 1 3/8", plug extension B590-298, cam screw B520-691,
2 housing screws B520-693. Order front housing and cam separately
09-995
Service kit- back housing for 1 1/2" length Back Housing,
41.60B520-724 Mortise 1 1/2", 2 Housing screws B520-693 , plug extension B590-298,
cam screw B520-691. Order front housing and cam separately
09-996
Service kit- back housing for 1 5/8" length
41.60Back Housing, B520-725 Mortise 1 5/8", 2 Housing screws B520-693, plug extension
B590-299, cam screw B520-692. Order front housing and cam separately
09-997
Service kit-back housing for 1 3/4" length
41.60Back Housing, B520-726 Mortise 1 3/4", 2 Housing screws B520-693 ,
plug extension B590-299, cam screw B520-692. Order front housing and cam separately
09-998
Service kit-back housing Rim Cyl
20.80Back Housing Rim B520-727, housing screws B520-693, Tail piece B502-899,
Driver B502-310, back plate & screws B202-328. Order front housing and cam separately
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
361
Price Book 6
Effective July 9, 2018
KEYS
KEYS-1
Shoul
der
Bow
Blade
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
362
Price Book 6
Effective July 9, 2018
KEYS
Ordering Procedures
Common Pricing Information
1. Cut keys ordered with locks are priced according to appropriate extra cut key charge listed on page Keys-26.
2. Grand master sections L, LP (Primus) and Y are supplied in stainless steel only and are recommended to be cut at the factory only.
3. Stamping standards and charges are listed on page Keys-18.
4. Keying services and associated charges are listed on page Keys-22.
5. All primus Level 1+ and 7 key orders must contain the locksmith ID.
6. All restricted key orders are subject to the restricted keyway sales policies are listed in Terms & Conditions.
7. Master, grand master sections (H, J, K, L, etc.) for key blanks can be ordered in any quantity and are not subject to the purchasing in
multiples of 50
KEYS-2
To order Schlage products, descriptive data should be in the same sequence as shown below.
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr Thk Ext DIM
Additional
Details
DES FIN DES FIN
1 100 35-272 S123
Line Item: Line item number
Qty: Quantity
Product: Product number + keyway
Outside Des: Not Applicable
Outside Fin: Not Applicable
Inside Des: Not Applicable
Inside Fin: Not Applicable
Hand: Not Applicable
Latch: Not Applicable
Strike: Not Applicable
Dr Thk: Not Applicable
Ext: Not Applicable
Dim: Not Applicable
Additional
Details: Primus XP #, Everest 29 Facility Code, Locksmith ID#, Additional stamping instructions
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
363
Price Book 6
Effective July 9, 2018
KEYS & KEYING
Introduction
Cylinders: Schlage Cylinder and Keyway Terminology.
KEYS-3
Table of Contents
Keys Ordered Separately Keys-4
Classic Standard Key Blanks ..................................................................................................................................................... Keys-4
Classic Standard Cut Keys ......................................................................................................................................................... Keys-5
Everest® Full Size Standard Key Blanks and Cut Keys ...................................................................................................... Keys-6
Everest® Small Format IC Key Blanks and Cut Keys ............................................................................................................ Keys-7
Key Blanks, Best® Key Sections .................................................................................................................................................. Keys-7
Everest 29™ Full Size Standard Key Blanks and Cut Keys ................................................................................................ Keys-8
Everest 29™ Small Format IC Key Blanks and Cut Keys .................................................................................................... Keys-9
Classic Primus® Key Blanks, Cut Keys and I.D. Cards ....................................................................................................... Keys-10
Classic Primus® XP Key Blanks, Cut Keys and I.D. Cards ................................................................................................... Keys-11
Everest® Primus® Key Blanks, Cut Keys and I.D. Cards ....................................................................................................... Keys-12
Everest® Primus® XP Key Blanks, Cut Keys and I.D. Cards ................................................................................................Keys-15
Split Key Construction Keys ..................................................................................................................................................... Keys-17
Special Keys ................................................................................................................................................................................... Keys-17
Presentation Keys ........................................................................................................................................................................ Keys-18
Key Stamping Keys-19
Cylinder Stamping Keys-20
Construction Core Program Keys-21
Full Size Construction Core Program ...................................................................................................................................... Keys-21
Small Format Construction Core Program .......................................................................................................................... Keys-22
Keying Charges Keys-23
Contract Master Keying ............................................................................................................................................................ Keys-23
Contract Construction Keying (CK)/Split Key Construction Keying ............................................................................ Keys-23
Other Keying (Non-Master Keyed) ....................................................................................................................................... Keys-23
Residential Master Keying (RMK) and/or Residential Construction Keying (RCK) ................................................ Keys-24
Custom Presentation Keys, Homeowners Document Folders .......................................................................................Keys-25
Bitting Lists (Transcripts) ......................................................................................................................................................... Keys-26
KSC Generic Key Charts.............................................................................................................................................................. Keys-26
Keys Ordered with Locks or Cylinders ................................................................................................................................... Keys-27
Pack Change Keys Independently (PKI) ............................................................................................................................. Keys-27
SITEMASTER 200® Keys-28
Key System Management Software ..................................................................................................................................... Keys-28
How To Order Forms & Examples
Letter of Authorization ...............................................................................................................................................................Keys-29
Primus Order Check List ..............................................................................................................................................................Keys-30
Master Keyed Order Form and Example ...............................................................................................................................Keys-31
Master Key System System Summary ...................................................................................................................................Keys-35
Primus Face Sheet........................................................................................................................................................................Keys-45
Primus Signature Form ............................................................................................................................................................... Keys-47
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
364
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keys Ordered Separately Classic Standard Key Blanks
35-100 (5-Pin Standard)
35-101 (6-Pin) 35-130 (5-Pin)
35-131 (6-Pin) 35-102 35-056
35-140 (5-Pin)
35-141 (6-Pin)
35-143 (5-Pin)
35-144 (6-Pin)
CONTROL
KEYS-4
Classic Standard Key Blanks
Part
Number Description
Price Each
Standard
Sections
Restricted
Sections
Standard Bow
35-100
5-Pin
Standard bow, embossed both sides Order in
multiples of 50
35-130 Standard bow, unembossed both sides $1.50 $5.10
35-101
6-Pin
Standard bow, embossed both sides Order in
multiples of 50
35-131 Standard bow, unembossed both sides 2.00 7.00
35-102 Emergency Standard bow, embossed both sides, notched for all ward positions 6.10
35-056
Control
Standard bow, embossed both sides
6.30
35-076 Standard bow, unembossed both sides
35-077 Hotel Function, embossed both sides
35-079 Hotel Function, unembossed both sides
Large Bow
35-140 5-Pin Large bow, embossed both sides $5.90
35-141 6-Pin
Access Bow
35-143* 5-Pin Access bow, embossed both sides $5.90
35-144** 6-Pin
Note: Large bow custom logo keys are available as key blanks only. Cut keys are not available.
*Available with C, CE, E, and F key sections only.
** Available with all sections except L and Y.
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
365
Price Book 6
Effective July 9, 2018
Keys Ordered Separately • KEYS & KEYING
86776
CCombination
Section
R492518
CMaster Key Symbol
Registry #
AA
Section
CONTROL
C
Section
R492518
48-100 (5-Pin)
48-101 (6-Pin) 49-100 (5-Pin)
49-101 (6-Pin) 48-056
49-056
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
KEYS-5
Classic Standard Cut Keys
Part
Number Description
Price Each
Standard
Sections
Restricted
Sections
Standard Bow
48-100 5-Pin Standard bow, embossed both sides
$6.20 $15.8048-101 6-Pin
48-130 5-Pin Standard bow, unembossed both sides
48-131 6-Pin –
48-102 Emergency Standard bow, embossed both sides, notched for all ward positions 15.80 15.80
48-056
Control
Standard bow, embossed both sides
15.80 15.80
48-076 Standard bow, unembossed both sides
48-077 Hotel Function, embossed both sides
48-079 Hotel Function, unembossed both sides
Large Bow
48-140 5-Pin Large bow, embossed both sides 8.90 –
48-141 6-Pin
Access Bow
48-143* 5-Pin Access bow, embossed both sides 8.90 –
48-144** 6-Pin
*Available with C, CE, E, and F key sections only.
** Available with all sections except L and Y.
Classic Standard Master Keys
Part
Number Description Price Each
Standard Bow
49-100 5-Pin Standard bow, embossed both sides
10.80
49-101 6-Pin
49-130 5-Pin Standard bow, unembossed both sides
49-131 6-Pin
49-102 Emergency Standard bow, embossed both sides, notched for all ward positions
15.80
49-056
Control
Standard bow, embossed both sides
49-076 Standard bow, unembossed both sides
49-077 Hotel Function, embossed both sides
49-079 Hotel Function, unembossed both sides
Large Bow
49-140 5-Pin Large bow, embossed both sides 14.60
49-141 6-Pin
Access Bow
49-143* 5-Pin Access bow, embossed both sides 14.60
49-144** 6-Pin
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
366
Price Book 6
Effective July 9, 2018
KEYS-6
KEYS & KEYING • Keys Ordered Separately Full Size Everest Standard
Key Blanks, Cut Keys, Master Keys
35-015
Unembossed
35-002
Standard for
Everest D Family
35-003
Control
35-009
Standard for
Everest C Family
Back of
All Blanks
(except 35-015)
DO NOT DUPLICATE
Pat. 5,715,717
Pat. 5,715,717 DO NOT DUPLICATE
Pat. 5,715,717
001426
Facility Code
(Everest D Family Only)
Section
DO NOT DUPLICATE
Pat. 5,715,717
35-015
Unembossed
35-002
Standard for
Everest D Family
35-003
Control
35-009
Standard for
Everest C Family
Back of
All Blanks
(except 35-015)
DO NOT DUPLICATE
Pat. 5,715,717
Pat. 5,715,717 DO NOT DUPLICAT E
Pat. 5,715,717
001426
Facility Code
(Everest D Family Only)
Section
DO NOT DUPLICATE
Pat. 5,715,717
Full Size Everest Standard Key Blanks
Description
Part
Number
C Family
Open Sections
D Family
Restricted Sections
Standard embossed key 35-009 Order in multiples of 50
$3.40
—
DO NOT DUPLICATE embossed key 35-002 $7.00
DO NOT DUPLICATE unembossed key 35-015
Control key, DND embossed 35-003 5.60 7.00
Control key, DND, hotel function 35-016
Emergency key blank, DND 35-007 5.60 7.00
Note: 1) See page Keys-12 for key stamping options.
Full Size Everest Standard Cut Keys
Description
Part
Number
C Family
Open Sections
D Family
Restricted Sections
Standard key 48-009
$8.80
—
DO NOT DUPLICATE key 48-002
$16.30
DO NOT DUPLICATE key, unembossed 48-015
Set-up key 48-013
Master key 49-009
16.30
—
Master key, DO NOT DUPLICATE 49-002
16.30
Master key, DO NOT DUPLICATE, unembossed 49-015
Control key DND std., non-factory system 48-003
Control key DND std., factory system 49-003
Control key DND, hotel function, non-factory 48-016
Control key DND, hotel function, factory sys. 49-016
Emergency key DND, non-factory system 48-007
Emergency key DND, factory system 49-007
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
367
Price Book 6
Effective July 9, 2018
KEYS-7
SFIC Everest Restricted
& Best® Key Sections Keys Ordered Separately • KEYS & KEYING
001426
AA
R492518
Section Facility Code
Registry No. Key Symbol
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
35-401
Key Blanks 48-401
Operating Keys 49-356
Control Keys 49-401
Master Keys
Small Format Interchangeable Core Keys,
Everest Restricted Key Sections
Part
Number Description
Price
Each
Key Blanks
35-401 Embossed key blank (control and operating) Order in
multiples
of 50
$6.60
35-021 Unembossed key blank (control and operating)
35-425 Embossed key blank (Everest SL)
35-426 Unembossed key blank (Everest SL)
Cut Keys
48-401 Embossed operating key 12.90
48-021 Unembossed operating key
49-401 Embossed master key
13.30
49-021 Unembossed master key
49-356 Embossed control key
49-022 Unembossed control key
49-425 Embossed master key (Everest SL)
49-426 Unembossed master key (Everest SL)
48-425 Embossed control key (Everest SL)
48-426 Unembossed control key (Everest SL)
35-310
Key Blanks
J
DUPLICATION
PROHIBITED
Key Blanks, Best® Key Sections
Part Number Description Price Each
35-310 Key blank, 6 or 7-pin
Specify keyway using B suffix: AB = A, BB=B, CB=C,
DB = D, DDB=DD, EB = E, FB = F, GB = G, HB = H,
JB = J, KB = K, LB = L, NB=N, MB = M, RB=R, TBB=TB,
TBD=TD, QB=Q.
Order in multiples of 50
$3.00
Notes: Key stamping not available on 35-310 key blanks.
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
368
Price Book 6
Effective July 9, 2018
KEYS-8
KEYS & KEYING • Keys Ordered Separately Full Size Everest 29 Standard
Key Blanks, Cut Keys, Master Keys
Standard for
Control Keys
and all T Family keys.
Optional for S Family
35-268 Operating
35-269 Control
Back of
35-269
Standard Front
for S Family
35-270
Plain Both Sides
35-272
Back of
All Except
35-272
6-Pin
Control
Standard Front
35-004 XP Operating
35-005 Control
Plain Both Sides
35-013
Back of
All Except
35-013
Standard markings unless otherwise specified. See Keys-18 for additional key stamping information.
Full Size Everest 29™ Standard Key Blanks
Description
Part
Number
S Family
Open Sections
T Family
Restricted Sections
Standard embossed key 35-270 Order in multiples of 50
$3.40
—
DO NOT DUPLICATE embossed key 35-268 $7.00
DO NOT DUPLICATE unembossed key 35-272
Control key, DND embossed 35-269 5.60 7.00
Control key, DND, hotel function 35-267
Emergency key blank, DND 35-271 5.90 7.00
Everest 29 Shim, duplicating (Order in packs of 10) 40-225 0.58
Full Size Everest 29 Standard Cut Keys
Description
Part
Number
S Family
Open Sections
T Family
Restricted Sections
Standard key 48-270
$8.80
—
DO NOT DUPLICATE key 48-268
$16.30
DO NOT DUPLICATE key, unembossed 48-272
Set-up key 48-034
Master key 49-270
16.30
—
Master key, DO NOT DUPLICATE 49-268
16.30
Master key, DO NOT DUPLICATE, unembossed 49-272
Control key DND std., non-factory system 48-269
Control key DND std., factory system 49-269
Control key DND, hotel function, non-factory 48-267
Control key DND, hotel function, factory system 49-267
Emergency key DND, non-factory system 48-271
Emergency key DND, factory system 49-271
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
369
Price Book 6
Effective July 9, 2018
SFIC Everest 29 Restricted
Key Sections Keys Ordered Separately • KEYS & KEYING
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
35-400
Key Blanks 35-264
Operating Keys 49-355
Control Keys 49-400
Master Keys
Small Format Interchangeable Core Keys,
Everest 29 Restricted Key Sections
Part
Number Description
Price
Each
Key Blanks
35-400 Embossed key blank
(control and operating)
Order in
multiples
of 50
$7.00
35-429 Embossed key blank - Everest 29 SL
(control and operating)
35-264 Unembossed key blank
(control and operating)
35-430 Unembossed key blank - Everest 29 SL
(control and operating)
Cut Keys
48-400 Embossed operating key 15.20
48-264 Unembossed operating key
49-400 Embossed master key
15.20
49-264 Unembossed master key
49-355 Embossed control key
49-000 Unembossed control key
49-429 Embossed master key (Everest SL)
49-430 Unembossed master key (Everest SL)
48-429 Embossed control key (Everest SL)
48-430 Unembossed control key (Everest SL)
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
370
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keys Ordered Separately Classic Primus Keys,
Classic Primus I.D. Cards
Key Blanks Cut Keys
48-053, 49-053
Front
Back
of Both
48-157, 49-157
Front
35-157
Front
35-053
Front
Back
of Both
PRIMUS
DO NOT DUPLICATE
PRIMUS
DO NOT DUPLICATE
48-053, 49-053
Front
Back
of Both
48-157, 49-157
Front
35-157
Front
35-053
Front
Back
of Both
PRIMUS
DO NOT DUPLICATE
PRIMUS
DO NOT DUPLICATE
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
Classic Primus I.D. Cards
Part Number Level Price Each
40-061 1 Order in multiples
of 50
$3.40
40-065 1 Plus
40-062 2
KEYS-10
Classic Primus Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-157 Standard bow, embossed both sides Order in
multiples of 50
$8.20
35-053 Standard bow, unembossed one side, “PRIMUS” logo on one side
35-171 Standard Bow, Stainless steel LP section key 54.30
35-172 Control Key, Standard Bow Stainless Steel, LP section only 54.30
35-116 Large bow, embossed both sides 13.30
35-115 Access bow, embossed both sides
35-158 Control key, standard bow, embossed both sides 12.80
35-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side
35-159 Lockout key, standard bow, embossed both sides 12.80
Cut Keys
48-157 Standard bow, embossed both sides 20.00
48-053 Standard bow, unembossed one side, “PRIMUS” logo on one side
48-171 Standard bow, stainless steel LP section key 76.60
48-116 Large bow, embossed both sides 25.50
48-115 Access bow, embossed both sides
48-158 Control key, standard bow, embossed both sides 19.50
48-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side
48-172 Control key, stainless steel LP section control key 88.10
48-159 Lockout key, standard bow, embossed both sides 20.00
Master Keys
49-157 Standard bow, embossed both sides 20.00
49-053 Standard bow, unembossed one side, “PRIMUS” logo on one side
49-171 Standard bow, stainless steel LP section key 76.60
49-116 Large bow, embossed both sides 25.50
49-115 Access bow, embossed both sides
49-158 Control key, standard bow, embossed both sides 20.00
49-052 Control key, standard bow, unembossed one side, “PRIMUS” logo on one side
49-172 Control key, stainless steel LP section control key 88.10
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
371
Price Book 6
Effective July 9, 2018
Classic Primus I.D. Cards
Part Number Level Price Each
40-061-XP 1 Order in multiples
of 50
$3.40
40-065-XP 1 Plus
40-062-XP 2
Classic Primus XP Keys,
Classic Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING
Key Blanks Cut Keys
48-053-XP, 49-053-XP
Front
Back
of Both
48-157-XP, 49-157-XP
Front
35-157-XP
Front
35-053-XP
Front
Back
of Both
PRIMUS
DO NOT DUPLICATE
PAT
. NO. 7,195,424
PRIMUS
DO NOT DUPLICATE
PAT
. NO. 7,195,424
48-053-XP, 49-053-XP
Front
Back
of Both
48-157-XP, 49-157-XP
Front
35-157-XP
Front
35-053-XP
Front
Back
of Both
PRIMUS
DO NOT DUPLICATE
PAT
. NO. 7,195,424
PRIMUS
DO NOT DUPLICATE
PAT
. NO. 7,195,424
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
KEYS-11
Classic Primus Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-157-XP Standard bow, embossed both sides Order in
multiples of 50
$8.20
35-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side
35-171-XP Standard Bow, Stainless Steel LP section 54.30
35-172-XP Control Key, Standard Bow Stainless Steel, LP section only 54.30
35-116-XP Large bow, embossed both sides 13.30
35-115-XP Access bow, embossed both sides
35-158-XP Control key, standard bow, embossed both sides 12.80
35-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side
35-159-XP Lockout key, standard bow, embossed both sides 12.80
Cut Keys
48-157-XP Standard bow, embossed both sides 20.00
48-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side
48-171-XP Standard bow, stainless steel LP section key 76.60
48-116-XP Large bow, embossed both sides 25.50
48-115-XP Access bow, embossed both sides
48-158-XP Control key, standard bow, embossed both sides 19.50
48-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side
48-172-XP Control key, stainless steel LP section control key 8.10
48-159-XP Lockout key, standard bow, embossed both sides 20.00
Master Keys
49-157-XP Standard bow, embossed both sides 20.00
49-053-XP Standard bow, unembossed one side, “PRIMUS” logo on one side
49-171-XP Standard bow, stainless steel LP section key 76.60
49-116-XP Large bow, embossed both sides 25.50
49-115-XP Access bow, embossed both sides
49-158-XP Control key, standard bow, embossed both sides 20.00
49-052-XP Control key, standard bow, unembossed one side, “PRIMUS” logo on one side
49-172-XP Control key, stainless steel LP section control key 88.10
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
372
Price Book 6
Effective July 9, 2018
KEYS-12
KEYS & KEYING • Keys Ordered Separately Everest Primus Keys,
Everest Primus I.D. Cards
35-012 35-005
Everest Primus
Embossed Control
35-004
Embossed
Everest Primus Key
Back of
All Keys
(except unembossed)
Facility or
Dealer ID Number
Section
Pat. 5,809,816
PRIMUS
DO NOT DUPLICATE
Pat. 5,809,816
PRIMUS
DO NOT DUPLICATE
Pat. 5,809,816
DO NOT DUPLICATE
001426
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
Everest Primus I.D. Cards
Part Number Level Price Each
40-060 1
Order in multiples
of 50
$4.20
Everest Primus Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-004 6-Pin Standard bow, embossed one side Order in
multiples of 50
$8.30
35-012 Standard bow, unembossed
35-005 Control Control key, standard bow, embossed one side
13.00
35-013 Control key, standard bow, unembossed
35-006 Lockout Lockout key, standard bow, embossed one side
35-019 Lockout key, standard bow, unembossed
Cut Keys
48-004 6-Pin Standard bow, embossed one side
20.00
48-012 Standard bow, unembossed
48-005 Control Control key, standard bow, embossed one side
48-020 Control key, standard bow, unembossed
48-006 Lockout Lockout key, standard bow, embossed one side
48-019 Lockout key, standard bow, unembossed
Master Keys
49-004 6-Pin Standard bow, embossed one side
20.00
49-012 Standard bow, unembossed
49-005 Control Control key, standard bow, embossed one side
49-020 Control key, standard bow, unembossed
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
373
Price Book 6
Effective July 9, 2018
KEYS-13
Everest Primus XP Keys,
Everest Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING
35-012-XP 35-005-XP
Everest Primus
Embossed Control
35-004-XP
Embossed
Everest Primus Key
Back of
All Keys
(except unembossed)
Facility or
Dealer ID Number
Section
Pat. 5,809,816
PRIMUS
DO NOT DUPLICATE
Pat. 5,809,816
PRIMUS
DO NOT DUPLICATE
Pat. 5,809,816
DO NOT DUPLICATE
001426
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
Everest Primus XP I.D. Cards
Part Number Level Price Each
40-060-XP 7 or 8
Order in multiples
of 50
$4.20
Everest Primus XP Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-004-XP 6-Pin Standard bow, embossed one side Order in
multiples of 50
$8.30
35-012-XP Standard bow, unembossed
35-005-XP Control Control key, standard bow, embossed one side
13.00
35-013-XP Control key, standard bow, unembossed
35-006-XP Lockout Lockout key, standard bow, embossed one side
35-019-XP Lockout key, standard bow, unembossed
Cut Keys
48-004-XP 6-Pin Standard bow, embossed one side
20.00
48-012-XP Standard bow, unembossed
48-005-XP Control Control key, standard bow, embossed one side
48-020-XP Control key, standard bow, unembossed
48-006-XP Lockout Lockout key, standard bow, embossed one side
48-019-XP Lockout key, standard bow, unembossed
Master Keys
49-004-XP 6-Pin Standard bow, embossed one side
20.00
49-012-XP Standard bow, unembossed
49-005-XP Control Control key, standard bow, embossed one side
49-020-XP Control key, standard bow, unembossed
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
374
Price Book 6
Effective July 9, 2018
KEYS-14
KEYS & KEYING • Keys Ordered Separately Everest 29 Primus Keys,
Everest 29 Primus I.D. Cards
Standard Front
35-199-XP Operating
35-273-XP
Plain Both Sides
35-138-XP Control
35-215-XP Operating
Back of All Except
35-199-XP
35-273-XP
35-216-XP
Standard Front
35-199 operating
35-273
Plain Both Sides
35-138 Control
35-215 Operating
Back of
All Except
35-199
35-273
35-216
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
Everest 29 Primus I.D. Cards
Part Number Level Price Each
40-060 7 or 8
Order in multiples
of 50
$4.20
Everest 29 Primus Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-199 6-Pin Standard bow, embossed one side Order in
multiples of 50
$8.50
35-215 Standard bow, unembossed
35-273 Control Control key, standard bow, embossed one side
13.60
35-138 Control key, standard bow, unembossed
35-216 Lockout Lockout key, standard bow, embossed one side
35-218 Lockout key, standard bow, unembossed
Cut Keys
48-199 6-Pin Standard bow, embossed one side
21.00
48-215 Standard bow, unembossed
48-273 Control Control key, standard bow, embossed one side
48-014 Control key, standard bow, unembossed
48-216 Lockout Lockout key, standard bow, embossed one side
48-218 Lockout key, standard bow, unembossed
Master Keys
49-199 6-Pin Standard bow, embossed one side
21.00
49-215 Standard bow, unembossed
49-273 Control Control key, standard bow, embossed one side
49-023 Control key, standard bow, unembossed
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
375
Price Book 6
Effective July 9, 2018
KEYS-15
Everest 29 Primus XP Keys,
Everest 29 Primus XP I.D. Cards Keys Ordered Separately • KEYS & KEYING
Standard Front
35-199-XP Operating
35-273-XP
Plain Both Sides
35-138-XP Control
35-215-XP Operating
Back of All Except
35-199-XP
35-273-XP
35-216-XP
Standard Front
35-199 operating
35-273
Plain Both Sides
35-138 Control
35-215 Operating
Back of
All Except
35-199
35-273
35-216
Standard markings unless otherwise specified. See page Keys-18 for additional key stamping information.
Everest 29 Primus XP I.D. Cards
Part Number Level Price Each
40-060-XP 7 or 8
Order in multiples
of 50
$4.20
Everest 29 Primus XP Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-199-XP 6-Pin Standard bow, embossed one side Order in
multiples of 50
$8.50
35-215-XP Standard bow, unembossed
35-273-XP Control Control key, standard bow, embossed one side
13.60
35-138-XP Control key, standard bow, unembossed
35-216-XP Lockout Lockout key, standard bow, embossed one side
35-218-XP Lockout key, standard bow, unembossed
Cut Keys
48-199-XP 6-Pin Standard bow, embossed one side
21.00
48-215-XP Standard bow, unembossed
48-273-XP Control Control key, standard bow, embossed one side
48-014-XP Control key, standard bow, unembossed
48-216-XP Lockout Lockout key, standard bow, embossed one side
48-218-XP Lockout key, standard bow, unembossed
Master Keys
49-199-XP 6-Pin Standard bow, embossed one side
21.00
49-215-XP Standard bow, unembossed
49-273-XP Control Control key, standard bow, embossed one side
49-023-XP Control key, standard bow, unembossed
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
376
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keys Ordered Separately Everest 29 Primus Keys,
Everest 29 Primus I.D. Cards
Everest B Keyway Family Primus XP
Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-421-XP Standard Bow, Embossed one side
Order in
multiples of 50
$8.50
35-422-XP Standard Bow, Unembossed
35-427-XP Standard Bow, Embossed
(Everest 29 SL)
35-428-XP Standard Bow, Unembossed
(Everest 29 SL)
Cut Keys
48-421-XP Standard Bow, Embossed one side
21.00
48-422-XP Standard Bow, Unembossed
48-427-XP Standard Bow, Embossed
(Everest 29 SL)
48-428-XP Standard Bow, Unembossed
(Everest 29 SL)
Master Keys
49-421-XP Standard Bow, Embossed one side
21.00
49-422-XP Standard Bow, Unembossed
49-427-XP Standard Bow, Embossed
(Everest 29 SL)
49-428-XP Standard Bow, Unembossed
(Everest 29 SL)
Everest 29 R Keyway Family Primus XP
Key Blanks and Cut Keys
Part Number Description Price Each
Key Blanks
35-423-XP Standard Bow, Embossed one side
Order in
multiples of 50
$8.50
35-424-XP Standard Bow, Unembossed
35-431-XP Standard Bow, Embossed
(Everest 29 SL)
35-432-XP Standard Bow, Unembossed
(Everest 29 SL)
Cut Keys
48-423-XP Standard Bow, Embossed one side
21.00
48-424-XP Standard Bow, Unembossed
48-431-XP Standard Bow, Embossed
(Everest 29 SL)
48-432-XP Standard Bow, Unembossed
(Everest 29 SL)
Master Keys
49-423-XP Standard Bow, Embossed one side
21.00
49-424-XP Standard Bow, Unembossed
49-431-XP Standard Bow, Embossed
(Everest 29 SL)
49-432-XP Standard Bow, Unembossed
(Everest 29 SL)
35-421-XP
Front Back
35-423-XP
Front Back
35-422-XP
Front Back
35-424-XP
Front Back
KEYS-16
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
377
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keys Ordered Separately
Split Key Construction Keys,
Special Keys
35-057
Classic
35-104 Key Blank
48-104 Cut Key
Everest®
35-008 Key Blank
48-008 Cut Key
Everest 29
35-097 Key Blank
48-097 Cut Key
Standard
35-110 Classic Blank
48-113 Classic Cut
35-289 Everest Blank
48-289 Everest Cut
Hotel Cylindrical
35-111 Classic Blank
48-114 Classic Cut
35-231 Everest Blank
48-039 Everest Cut
Split Key Construction Keys
Part Number
Description Classic Everest Everest 29
Price
Each
Key Blanks
Construction key, standard bow, embossed 35-104 35-008 35-097 $6.40
Construction insert 35-110 35-289 35-289 8.90
Construction insert, A85, AL85, D85, ND85, or H185 function
35-111 35-231 35-231
Extractor tool 35-057 21.80
Cut Keys
Construction key, standard bow, embossed 48-104 48-008 48-097 6.40
Construction insert 48-113 48-289 48-289 8.90
Construction insert, A85, AL85, D85, ND85, or H185 function
48-114 48-039 48-039
Notes: Split key construction keys are NOT available for interchangeable core cylinders.
Split key construcion keys are ONLY available in L, Y, 0000 and ZZZZ Classic sections, C000 and D000 Everest sections and S000 and
T000 Everest 29 sections.
35-250 35-251 L583-233-458 M504-271
Special Keys
Part
Number Description
Price
Each
35-250 Emergency key, A40, AL40, D40, or ND40 function $5.10
35-251 Spanner key, A85, AL85, D85, ND85, or H185 function
L583-233-458 Emergency turn, L9040 function
(note: for L9040 with outside indicator, a small flathead screwdriver is used instead of an emergency turn)
18.50
M504-271 Emergency key, F40 or S40 function 1.60
61-509 Emergency release key standard size, for occupancy deadbolts (Includes one key, ring, and instruction tag.) 10.70
61-510 Emergency release key large, for occupancy deadbolts (Includes one key, ring, and instruction tag.) 20.30
KEYS-17
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
378
Price Book 6
Effective July 9, 2018
Presentation Keys
Keys Ordered Separately • KEYS & KEYING
35-223
35-224 35-227
35-228 35-229
Presentation Keys
Part
Number Description
Price
Each
Key Blanks
35-223 5-Pin Velvet case with 2 standard bow Classic gold plated blanks, embossed both sides $170.00
35-224 6-Pin
35-227 5-Pin Velvet case with 1 large bow Classic gold plated blank, embossed both sides
35-228 6-Pin
35-229 6-Pin Velvet case with 1 Everest gold plated blank
Cut Keys
48-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides $185.00
48-224 6-Pin
48-227 5-Pin Velvet case with 1 large bow Classic gold plated key, embossed both sides
48-228 6-Pin
48-229 6-Pin Velvet case with 1 Everest gold plated key
Master Keys
49-223 5-Pin Velvet case with 2 standard bow Classic gold plated keys, embossed both sides $201.00
49-224 6-Pin
49-227 5-Pin Velvet case with 1 large bow Classic gold plated key, embossed both sides
49-228 6-Pin
49-229 6-Pin Velvet case with 1 Everest gold plated key
Note: Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.
KEYS-18
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
379
Price Book 6
Effective July 9, 2018
Stamping Area
Key Symbol
(Standard on Everest
and Primus keys
for MK systems)
Key Section Bitting
(Not stamped on Everest
or Primus keys)
DO NOT DUPLICATE
C
765352
AA1
KEYS & KEYING • Key Stamping
When ordered with a lock or cylinder, 50-XXX charges will be added as
an option to the product when applicable. Stand alone
50-XXX Charges will be separate lines and priced separately.
Key Stamping
Description Notes Key Type Specify
Part
Number Price Each Key
Visual Key Control (VKC)
with standard key symbols
1, 9 Classic Standard Stamp key symbol on key 50-217 $2.70
1, 2 Everest & all Primus (furnished as standard) —N/C
Non-standard code 1, 5, 8 All Standard & all Primus Non-standard code 50-003 7.20
per side
DO NOT DUPLICATE
Classic Standard Stamp key “Do Not Duplicate” XQ06-878
N/C
Everest C or Everest 29 S Family Standard Use 35-002 blanks (C) or 35-268 (S)
—
3
Everest B or Everest 29 R Family (furnished as standard)
Everest D, Everest 29 T Family, all Primus
Custom die stamp 4, 5 All Standard & all Primus Die Stamp Information 50-219 4.90
per side
Delete key section from bow Classic and Everest Standard, Classic and
Everest Primus/Primus XP, Everest Primus Delete key section 50-220 4.90
Bitting not stamped 9Classic Standard Delete key combination 50-221 2.70
Everest & all Primus (furnished as standard) —N/C
Stamp bitting
Classic Standard (furnished as standard) —N/C
6Everest C or Everest 29 S Family Standard Stamp key bitting 50-233 7.20
Stamp with Serial Number 7Restricted Everest (B, D), Everest 29 (R, T) Stamp Key with Serial Number 50-229 2.80
Notes: 1.) Maximum of 6 characters for VKC, Non Standard Code
2.) Specify “delete key symbol on key” if VKC is not required. Available at no charge.
3.) Everest B and Everest 29 R Family keys are stamped “RESTRICTED”.
4.) Contact product support, new dies are subject to a one time charge that is quoted through RFQ process; all new dies remain the
property of Schlage Lock Company.
5.) Only available on unembossed keys.
6.) Not available on Primus or Everest B and D or Everest 29 R and T Family keys or on keys with key symbols stamped (VKC).
7.) Serial Number is a Straight Numerical Sequence comprised of 8 digits including leading zeros..
8.) Sequential stamping will be charged as non-standard code (example: AA1-1, AA1-2, etc.).
9.) When selecting VKC (50-217) with DHI standard key symbols for Classic Standard systems, Delete Combination (50-221) will be
included at no charge.
KEYS-19
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
380
Price Book 6
Effective July 9, 2018
Cylinder Stamping • KEYS & KEYING
When ordered with a lock or cylinder, 50-XXX charges will be added
as an option to the product when applicable. Stand alone
50-XXX Charges will be separate lines and priced separately.
AA1
AA1
Cylinder Stamping
D
escription Notes Key Type Specify
Part Number
Price
Each
Visual Key Control (VKC) with standard
key symbols or non standard codes 1
Classic Standard, Everest C & D,
Everest 29 S &T
Standard, (Not available
for Primus or Primus XP) Stamp key symbol or non-
conventional code on face (VKC) or Cylinder
or core.
50-002 $6.60
Everest B Family and Everest 29
R (SFIC) —N/C
Concealed Key Control (CKC) with
standard key symbols or Non-standard
codes
1
Classic Standard, Everest C & D,
Everest 29 S &T
Standard, Primus and Primus
XP cylinders
Stamp key symbol or
non-conventional code on
side (CKC) of core
50-216 $6.60
Everest B Family and Everest 29
R (SFIC) —N/C
Note: Maximum of 6 characters for VKC, Non Standard Code or Serial number stamping.
KEYS-20
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
381
Price Book 6
Effective July 9, 2018
CONTROL
C
Section
KEYS & KEYING • Construction Core Program
Full Size
Construction Core Program
Example:
Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and one
control key. The following charges apply to this order:
1. 23-030-ICX construction cores (150 units).
2. 48-101-ICX cut keys (20 units).
3. 48-056-ICX cut control key (1 unit).
4. 50-231 Non-refundable handling charge (150 units-one per core ordered).
Upon return of the cores to the factory the distributor will be credited for the following:
1. 23-030-ICX construction cores (150 units).
There is no credit for the keys or handling fee.
Full Size Construction Core Program
Temporary construction cores may be ordered with full size interchangeable core locks, mortise cylinders and rim cylinders.
These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge (50-231).
See Terms & Conditions for more information.
Features:
• 6-Pin C keyway.
• Construction cores have a two-tone face: the faceplate is a flat black finish (622) and the plug is unfinished brass.
• Back of each core is marked with the letter that identifies the keyed alike group: A, B or C.
• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately.
• A control key is required to install and remove construction cores. Control keys must be ordered separately.
If a control key is not ordered, one will be supplied at a charge of $15.80.
• Construction cores may be returned for credit. Contact your Schlage representative for return authorization. Credit is issued
upon receipt of cores at our factory.
23-030-ICX 48-101-ICX 48-056-ICX
Full Size Construction Core Program
Part
Number Description Specify Price
Each
23-030-ICX Construction core
New jobs: Specify “ICX”
Existing jobs: Specify “ICA”, “ICB”
or “ICC”.
$71.00
48-101-ICX Cut key for construction phase (order separately) 8.00
48-056-ICX Cut control key (order separately) 15.80
50-231 Non-refundable handling charge (per core) 10.10
Notes: To order mortise and rim cylinders with full size construction cores for a new job, suffix ICX to non-Primus cylinder
number. Example: 30-008 ICX. For existing construction core combinations, specify ICA, ICB, or ICC.
Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide. Other
Schlage projects in the same area using the same or different contractors may use the same key. Where a higher degree
of security is desired, order a set of Standard or Primus® cores in 606 or 626 finish keyed alike to a random
combination. Specify “KA Group 1”. Such cores would not be assessed the handling fee and are not returnable to Schlage.
KEYS-21
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
382
Price Book 6
Effective July 9, 2018
Small Format
Construction Core Program
Construction Core Program • KEYS & KEYING
80-035 48-310 48-311
A
DUPLICATION
PROHIBITED
A
CONTROL
DUPLICATION
PROHIBITED
Small Format Construction Cores
Part
Number Description Specify
Price
Each
48-310 Cut key for construction phase (order separately) Schlage assigns the color for each
order at random. If a specific color
is required, specify “GRN” for green and
“BRN” for brown cores.
$8.40
48-311 Cut control key (order separately) 15.80
80-035 Construction core 43.00
50-231 Non-refundable handling charge (per core) 10.10
Small Format Disposable Cores
Part
Number Description
Price
Each
M204-152 Disposable plastic construction core $5.90
M204-152
KEYS-22
Small Format Construction Core Program
Temporary construction cores may be ordered with small format interchangeable core locks, mortise cylinders and rim
cylinders. These cores may also be ordered separately. All construction cores are assessed a non-refundable handling charge
(50-231). See Terms & Conditions for more information.
Features:
• Best® A keyway
• Construction cores have a green or brown face. Each color is keyed alike to its own operating and control key.
• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately. If construction operating keys are not ordered,
one 48-310 cut key will be provided per order at a charge of $8.40 unless specifically stated to not include.
• A control key is required to install and remove construction cores. Control keys must be ordered separately.
If a control key is not ordered, one will be supplied at a charge of $15.80.
• Construction cores may be returned for credit. Contact your Schlage representative for return authorization. Credit is issued
upon receipt of cores at our factory.
• Small format disposable cores may not be returned for credit.
Example:
Example for construction core charges and credits. distributor XYZ ordered 150 construction cores with 20 keys and
one control key. The following charges apply to this order:
1. 80-035 construction cores (150 units).
2. 48-310 cut keys (20 units).
3. 48-311 cut control key (1 unit).
4. 50-231 Non-refundable handling charge (150 units-one per core ordered).
Upon return of the cores to the factory the distributor will be credited for the following:
1. 80-035 construction cores (150 units).
There is no credit for the keys or handling fee.
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
383
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keying Charges
Contract Master Keying, Contract
Construction Keying, Other
Contract Master Keying
Part
Number Description
Price
Each
50-210 Cylinder Master keyed (MK), grand master keyed (GMK), Emergency Master keyed
(EMK), and Single keyed (SKD) groups (charge does not apply to interchangeable core)
$19.50
—Interchangeable core Master keyed (MK), grand master keyed (GMK), and Single
keyed (SKD) groups
N/C
Note: The Schlage Master Key Department determines and makes the final decision in the selection and use of key sections. 100% Expansion is
allowed for new master key systems unless.
Contract Construction Keying (CK)/Split Key Construction Keying
Part
Number Description
Price
Each
50-211 Cylinder Construction keyed (CK) $11.50
Notes: Construction keyed cylinder charges are in addition to master keying charges.
Pack Keys Individual (PKI) 60-000 packing is included at no extra charge.
Construction keying not available with Primus cylinders or interchangeable cores. Construction cores may be ordered for Interchangeable core locks,
mortise cylinders or rim cylinders for use during construction. See Construction Core Program).
Split Key construction keying requires 6 pin cylinders.
Construction master keys must be ordered separately
Extractor tool (35-057) will be added to all split key construction key orders unless specifically notes to exclude. Charge for 35-057 is $20.50.
Other Keying (Non-Master Keyed)
Part
Number Description
Price
Each
—Cylinder keyed different (KD) or keyed alike to a Schlage selected combination (KA)
in sets of 2 or more, include FSIC.
N/C
—Cylinder 0-bitted or 1-bitted, as applicable* N/C
50-001 Standard and Primus cylinder keyed to a specified combination $9.70
*Standard non-IC cylinders: Available 0-Bitted. 1-Bitted is not available and if specified, 0-bitted will be furnished. Standard IC cylinders:
Furnished 1-bitted. 0-Bitted is not available and if specified, 1-bitted will be furnished.
Primus cylinders: All Furnished 0-bitted. 1 bitted is not available and if specified, 0-bitted is furnished.
When ordered with a lock or cylinder, 50-XXX charges will be added as
an option to the product when applicable. Stand alone
50-XXX Charges will be separate lines and priced separately.
KEYS-23
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
384
Price Book 6
Effective July 9, 2018
Residential Master & Construction Keying
Keying Charges • KEYS & KEYING
When ordered with a lock or cylinder, 50-XXX charges will be added as
an option to the product when applicable. Stand alone
50-XXX Charges will be separate lines and priced separately.
KEYS-24
Residential Master Keying (RMK) and/or Residential Construction
Keying (RCK)
Qualifications:
• Residential projects.
• RMK and/or RCK must be specified on the order.
• Systems are available in 5-Pin C keyway only.
• Systems cannot be combined with Contract Master Key systems.
• Two levels of keying maximum (Change Key and Master Key levels only).
• Maison keying allowed.
• Door detailing and labeling allowable as listed below.
Residential Master Keying (RMK)
Part
Number Description
Price
Each
50-223 Cylinder Residential Master keyed (RMK) $2.60
49-100 Residential Master Key - Not offered for commercial products 10.80
Residential Construction Keying (RCK)/Lost Ball Construction Keying
Part
Number Description
Price
Each
50-224* Cylinder Residential Construction keyed (RCK) $2.60
48-100 Residential Construction Master Key 6.20
Notes: Lost ball construction device is triggered by the highest level permanent key unless otherwise specified.
Change keys packed in envelopes and packed in lock box. PKI packing available at no additional charge.
Residential Construction keying charges are in addition to Residential Master keying charges.
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
385
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keying Charges
Custom Presentation Keys,
Homeowners Document Folders
Send Building Partnerships orders to: Trade Marketing
Schlage Lock Company
Residential Customer Service
2119 E. Kansas City Rd.
Olathe, KS 66061
FAX: (800) 366-5625
email: res_contact_center@allegion.com
35-135-C MS-J175
35-135-C
MS-J175
H
OMEOWNER
D
OCUMENTS
Builder Logo
KEYS-25
Custom Presentation Keys
Part
Number Description
Price
Each
35-135-C* Large bow custom logo key (minimum order quantity: 400 keys) $3.00
50-230 Die charge for key customization (one time charge on initial order) 252.00
net
*Send Building Partnerships orders to address given at bottom of page.
Notes: Large bow custom logo keys are available as key blanks only. Cut keys are not available.
Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.
Homeowners Document Folders
Part
Number Description
Price
Each
MS-J175* Document folder, plain $6.30
MS-J175* Document folder, customized (minimum customized order quantity: 100 folders) 10.50
* Send Building Partnerships orders to address given at bottom of page.
Customized presentation keys require high-resolution logo file in “tiff” or “eps” format.
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
386
Price Book 6
Effective July 9, 2018
Bitting Lists, KSC Key Charts
Keying Charges • KEYS & KEYING
When ordered with a lock or cylinder, 50-XXX charges will be added as
an option to the product when applicable. Stand alone
50-XXX Charges will be separate lines and priced separately.
KSC Generic Key Charts
Part Number Description Price Each
50-600 6-Pin system with 4,096 change combinations furnished $1,254.00
50-700 7-Pin system with 16,384 change combinations furnished $1,625.00
Notes: KSC systems are for dealer or end-user maintained master key systems. KSC systems cannot be converted or tied to
factory established or factory maintained systems.
KSC systems are furnished with instruction manual and binder.
Number of valid/ usable change combinations provided in 50-600 is not guaranteed due to system constraints. 4,096
is the theoretical number possible, actual number of valid/ usable changes will vary.
KEYS-26
Bitting Lists (Transcripts)
Part
Number Description
Price
Each
50-123 Bitting list for factory master keyed products (requires written authorization from end-user). $226.00*
50-120 Establish new master key system for field master keying (one-time charge).
Each bitting is assessed a 50-121 or 50-122 charge below.
33.80
50-121 New master key bitting for cylinders keyed in the field.
50-120 charge assessed if this bitting establishes a new system.
4.40
50-122 New change key bitting for cylinders keyed in the field. 3.40
*Can be used for SiteMaster download (keying and bitting details) if ordered as such. Please specify SiteMaster
download file if applicable in the details column. Information reequired: is Structure or original order number,
end user name, city and state (used to verify the structure number). Also required is an email address for the end
user, include their full name to address the email and a “ Letter Of Authorization”.
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
387
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Keying Charges
Keys Ordered with Locks or Cylinders, PKI
When ordered with a lock or cylinder, 50-XXX charges will be added as
an option to the product when applicable. Stand alone
50-XXX Charges will be separate lines and priced separately.
Keys Ordered with Locks or Cylinders (2 std bow keys provided with keyed locks or cylinders)
Part Number Description Price Each
50-214 Extra cut Primus keys ordered with lock or cylinder. $10.90
50-215 Extra cut standard bow Classic or Everest C or Everest 29 S Family keys ordered with lock or cylinder 4.20
50-227 Extra cut large bow or access bow keys ordered with lock or cylinder 6.70
50-228 Cut large bow or access bow keys substituted for standard bow Classic keys 3.10
50-232 Extra cut Classic restricted families, Everest B Family, Everest D, Everest 29 R and Everest 29 T family keys ordered with
lock or cylinder.
8.00
Pack Change Keys Independently (PKI)
Part Number Description Price Each
60-000 Pack change keys independently (PKI) for split key construction keying N/C
60-001 Pack change keys independently (PKI) $0.58
KEYS-27
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
388
Price Book 6
Effective July 9, 2018
SITEMASTER 200® • KEYS & KEYING
®
Key System Management Software
Description Part Number Price Each
Windows Full Version on CD SM01-391 $2,522.00
Windows Full Version with Lockshop Enhancement SM01-392 2,789.00
Notes: SiteMaster manuals have been replaced by an extensive help menu on the CD
SiteMaster comes without any information loaded. The download file needs to be ordered
(see Part Number 50-123 Page 347 ordering instructions) and Schlage is not responsible to load personnel information, etc.
Forms
Description Part Number Price Each
Key Record Form (order in multiples of 50) SM01-210 $0.46
Download Free Demonstration Software
at allegion.com/us
KEYS-28
CL-SeriesCylindersCYLINDERS / KEYS / AUXILIARY
389
Price Book 6
Effective July 9, 2018
KEYS-29
KEYS & KEYING
Sample Letter of Authorization
For All Restricted Key Products
May 1, 2003
To: Schlage Dealer
100 East Avenue
Dealer City, State 11111
RE: District 10, Jones Elementary School
Please consider this authorization to ship product for the above-referenced project.
Jones Elementary School is to be keyed using a new Everest D Restricted Key System. For security
reasons, we would like to have all keys for this facility shipped to a location other than the job site. Master keyed prod-
ucts, however, can be shipped directly to the site. This letter authorizes Schlage to ship our restricted products to the
following addresses:
Master Keyed Products, Construction Keys, Locks Less
Cylinders, and Locks with Construction Cores
Attn: Building Project Manager
District 10 Schools
555 Main Street
End User City, State 55555
Master Keys, Change Keys, Control Keys, and Key Blanks
Attn: Locksmith
District 10 Lockshop
1201 Fifth Avenue
End User City, State 55555
These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility. We
understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to
add, remove, or change authorized shipping locations.
Sincerely,
End User Representative
Facilities Manager
Date - REQUIRED
Facility Name - REQUIRED
Dealer Name -
RECOMMENDED Include Registry
Number & Facility
Code (stamped on
keys) for existing
key systems
Authorized Ship-
To Addresses -
REQUIRED
End User
Representative
Signature -
REQUIRED
Letter may be mailed or faxed to Schlage
Schlage Restricted Order Processing
3899 Hancock Expressway
Colorado Springs, CO 80911
District 10 Schools
555 Main Street
End User City, State 55555
(555) 555-5555
End User
Letterhead - REQUIRED
DISTRICT 10
CL-Series Cylinders CYLINDERS / KEYS / AUXILIARY
390
Price Book 6
Effective July 9, 2018
KEYS & KEYING • Primus Checklist
PRIMUS AND EVEREST PRIMUS ORDERING CHECKLIST
TO FACILITATE ORDER ENTRY FOR KEYS, CYLINDERS, AND CARDS
IMPORTANT NOTES
To expedite processing of all Primus orders, it is highly recommended that Primus products
be ordered separately
For Level One Plus and 7, All Cylinder Orders Will Be Supplied LESS KEYBLANKS Unless Otherwise
Specified
For All Other Levels, All Cylinder Orders Will Be Supplied WITH KEYBLANKS Unless Otherwise Specified
PRIMUS EVEREST PRIMUS
FOR LEVEL ONE
3 The Distributor’s Primus number MUST be
provided
3 The Sequence number MUST be provided
FOR LEVEL ONE PLUS
3 The Distributor’s Primus number MUST be
provided
3 The Sequence number MUST be provided
3 The Locksmith number MUST be provided
FOR LEVEL TWO
3 The Dealer’s Primus number MUST be
provided
3 The Sequence number and/or Section MUST
be Provided
FOR LEVELS THREE & FOUR
3 Orders Originating a System MUST include
both an Original Facesheet and a Signature
Card
3 An Original Facesheet MUST accompany all
succeeding orders
3 The Primus number MUST be indicated on
the Facesheet
3 ALL fields on the Facesheet MUST be
completed where applicable
FOR LEVEL SEVEN
3 The Distributor’s Primus number MUST be
provided
3 The Locksmith’s Facility code MUST be
provided
3 The Keyway MUST be provided
FOR LEVEL EIGHT
3 The Distributor’s Primus number MUST be
provided
3 The Keyway MUST be provided
FOR LEVEL NINE
3 Orders Originating a System MUST include
both an Original Facesheet and a Signature
Card
3 An Original Primus Facesheet MUST
accompany all succeeding orders
3 The Primus number MUST be indicated on
the Facesheet
3 ALL fields on the Facesheet MUST be
completed where applicable
All Primus Orders & Supporting Documentation Should be Sent To:
Schlage
Attn: Primus Order Processing
3899 Hancock Expressway
Colorado Springs, CO 80911
KEYS-30
MASTER KEYED ORDER
This form must be attached to the
MASTER KEY SYSTEM SUMMARY FORM
Please provide as complete and accurate as possible so we can
provide what you need for your Key System
Excel Soft copy - Print Instructions:
To avoid printing more sheets than needed,
Select <Print>, from the print screen select
<Print range>, then select <Pages> from
___to___& click OK.
Quote #: Account No.: P.O. #:
Shipping Instructions: Mark Cartons: Date:
Order Written By: Customer Name and Address: Ship to:
For Further Information Contact:
Name:
Phone:
Fax:
Page 1 of ___
Items Ordered OUTSIDE
HAND
(Only one
hand per
line item)
INSIDE LATCH STRIKE Enter door
thickness
if not
standard
Enter
when
door
thickness
is greater/
equal to
2˝
Dimen-
sion for
mortise
cylinder,
blocking
ring, etc.
ADDITIONAL DETAILS
Lock Details DESIGN FINISH DESIGN FINISH
Key/Label Instructions
QTY Heading DOOR #
KEY
Symbol-
(s)
MK
Symbol-
(s)
LINE
ITEM
QTY PRODUCT DR THK EXT DIM
Page 1 of ___
MS-I100
Items Ordered OUTSIDE
HAND
(Only one
hand per
line item)
INSIDE LATCH STRIKE Enter door
thickness
if not
standard
Enter
when door
thickness
is greater/
equal to 2˝
Dimension
for mortise
cylinder,
blocking
ring, etc.
ADDITIONAL DETAILS
Lock Details DESIGN FINISH DESIGN FINISH
Key/Label Instructions
QTY Heading DOOR #
KEY
Symbol(s)
MK
Symbol(s)
LINE ITEM QTY PRODUCT DR THK EXT DIM
Page 2 of ___Page 2 of ___
MS-I150
1 of 5 MS-I200
MASTER KEY
SYSTEM SUMMARY
This form must be attached to the
Master Key Order form and P.O.
Please provide as complete and accurate as
possible so we can provide what you need for
your Key System.
o New
o Attached Dealer Specified Combinations
Construction Keyed o Yes o No
Full Size Construction Cores o ICA o ICB o ICC
(Schlage Only)
Small Format Construction Cores o Brown o Green
Construction Keyed Type
oFalcon o CK (BOK) o Lost Ball
oSchlage o CK (Split) o RCK ( 5-Pin C only )
Type
o 5-pin o 6-pin o 7-pin
See compatibility chart on page 5
Keyway
Specified **:
Schlage
 oClassic
 oClassic Primus *
Everest ®
 oB (Small Format IC, Restricted *)
 oC (Open)
oPrimus® *
oD (Restricted *)
oPrimus® *
Everest 29™
oR (Small Format IC, Restricted *)
 oS (Open)
oPrimus® *
oT (Restricted *)
oPrimus® *
Job Name
Address
City / State
Country
Account
No.
P.O.#
For detailed instructions on how to complete this form please refer to pages 4 & 5
System Overview
1. Select System
o Existing (provide info below)
Registry # __________________________________________
Structure or
Factory Order # _____________________________________
Falcon
oStandard
 oSchlage C
 oRestricted *
oInterchangeable Core A2
 oInterchangeable Core A4
** = The Commercial Master Key Department makes the final
decision in the selection of key sections
Everest 29 key sections are backwards compatible to Everest
keyways and have the following relationships:
R family sections > B family keyways
S family sections > C family keyways
T family sections > D family keyways
2 of 5 MS-I200
2. Select Keys & Key Stamping
3. Select Cylinder Stamping
Change Keys
No. Of Keys per Symbol
No. Of Keys per Cylinder
Type
oStandard Bow oStandard Bow oAccess Bow oLarge Bow
(Unembossed) (Schlage Only)
Key Stamp Details
oKeyset Symbol oDo Not Duplicate oWith Custom Die
(DND) (Specify)
oNon-standard Code (Specify)
Change Key Packaging and Shipping Instructions
Pack Keys Independently (PKI) of Lock or Cylinder ***
oYes oNo
If PKI, ship change keys to:
oDealer oOther
oSee Primus Facesheet
*** = Furnished standard at no charge with
Split-Key construction keying
Cylinder Stamp Details
oWith Industry Standard Key Symbol oNon-Standard Code (Specify)
Cylinder Stamping Location
oPlug Face (N/A in Primus) - VKC oConcealed (N/A in Falcon STD) - CKC
3 of 5 MS-I200
6. Operating Instructions
(Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders)
Cross Keyed is operated by
Cylinder these change keys
X
X
X
X
Cross Keyed is operated by
Cylinder these change keys
X
X
X
X
GGM o
GM o
MK o
MK o
MK o
MK o
Others o
5. Master Key Future Expansion
List Future MK Symbols
Example:
MK………oBJ, BK 40 each
Approx. # of Change Key Symbols Under Each Future MK
3
Level Qty. Per Master Key Symbol (s) Total Quantity
GGM
GM
MK or RMK
Control
Emergency
Others
Ship Master Keys To:
oDealer oSee Primus Facesheet oOther
Special Function Qty. Per Qty. Per
RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only)
CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only)
Extractor Tools **** Small Format Construction Core Keys
Small Format Construction Core Control Keys
4. Select Key Quantities
**** = Use with Construction Keying
4 of 5 MS-I200
7. Instructions and Compatibility
General Information
If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer
Service prior to placing the order:
Tel. 1-877-671-7011
Fax 1-800-452-0663
• Only one structure may be ordered on the same purchase order
• Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families
• Classic Primus refers to Primus Obverse and Primus Quad key section families
Section 1: Select System
Full Size Construction Cores
• Schlage only
Small Format Construction Cores
• 7-pin only for Schlage
• 6- and 7-pin for Falcon
CK (Split)
• 6-pin for Schlage and Falcon
• Split key construction keying is not available for Classic Primus or Everest 29 Primus
RCK (Lost Ball)
• 5-pin (C keyway) only for Schlage
• 5-, 6-, and 7-pin for Falcon
System Selection
• Refer to the compatibility chart
Section 2: Select Keys and Key Stamping
Stamp Details
• Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys
• For custom die, attach RFQ approval for Schlage
Section 3: Select Cylinder Stamping
Type
• For cylinder type refer to the compatibility chart
Keyway (specify)
• Schlage Commercial’s default key section for new Master Key Systems is Everest™ S145
5 of 5 MS-I200
Section 4: Key Quantities
Level
• Unless otherwise specified, the control key has the same cut as the highest-level key in the system
(Except SFIC systems)
Special Function
• Construction keys are not furnished unless specified
Change Keys
• Unless otherwise specified 2 change keys are furnished per lock or cylinder
Section 5: Master Key Future Expansion
• Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols
Section 6: Operating Instructions
• Cross keying reduces the security and expansion of key systems
• Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders
5 Pin 6 Pin 7 Pin Split
Key
Block
O-Key
Lost
Ball
Tempe
Core A2 A4 0.025 0.018
Schlage
Classic X X X X X
Everest 29 S X X X
Everest 29 T X X X
Everest 29 R X X X
Classic Primus (XP) X X
Everest 29 Primus (XP) X X
Falcon
Open X X X X X X
Restricted X X X X X
Schlage C X X
SFIC Open XX XXX
SFIC Restricted XX XXX
Compatibility Chart
IF SOLD TO ANY ENTITY/INDIVIDUAL OTHER THAN END-USER SPECIFY NAME:
29
MS-E120
© 2009 Ingersoll Rand
MS-E120 Rev. 6/09
Ingersoll Rand Security Technologies
Schlage
Attn.: Primus Order Processing
3899 Hancock Expressway
Security, CO. 80911
© 2014 Allegion
MS-E120 Rev. 3/14
Allegion
PRIMUS SECURITY LEVEL:
PROJECT INFORMA TION
Project Name (please print or type)
Street Address (no P .O. Box)
City State Zip Code
AUTHORIZED OWNER SIGNA TURE(S):
If restrictions are not indicated and in multiple signature cases, the first signature will be regarded as the primary authorit y able to control
other signers on this form.
1.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
2.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
3.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
4.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
5.
Name (please print or type) Street (no P .O. Box)
Title or Position City State Zip Code
Signature Date Phone Number
Level 3, 4, and 9 Order Authorization
Signature Card
PRIMUS ®
THIS SIGNA TURE CARD EST ABLISHES AUTHORIZA TION TO PURCHASE ADDITIONAL
PRIMUS HIGH SECURITY PRODUCT FOR THE SECURITY SYSTEM INST ALLED A T THE ADDRESS BELOW .
— OVER —
For Internal Use Only
Primus# Order#
G/Z/E S/M
THIS ORIGINAL FORM MUST BE MAILED TO SCHLAGE COMMERCIAL DIVISION WITH YOUR ORDER
– F AXED COPIES NOT ACCEPT ABLE –
3U (no exclusivity) 4Z (time exclusivity)
3G (2-digit zip exclusivity) 4N (nationwide exclusivity)
Classic K e yw a y s
9U (no exclusivity) 9Z (time exclusivity)
9G (2-digit zip exclusivity) 9N (nationwide exclusivity)
Ev erest 29 Keyways
MS-E130
DEALER OR LOCKSMITH AUTHORIZATION (OPTIONAL WITH OWNER AUTHORIZATION/SIGNATURE)
Dealer or Locksmith Account # Primus #
Dealer or Locksmith Company Name
Phone Number Fax Number
Contact 1 (Please print or type)
Contact 1 Signature
Owners Authorization By (Please print or type)
SPECIAL NOTE: In the case where the end user / owner has assigned the Dealer or Primus Locksmith Signature
authorization (as noted above), the Dealer or Primus Locksmith agrees to take full responsibility
for validating the owner’ s signature as identified on the Primus Signature Card before ordering
the material.
SPECIAL INSTRUCTIONS: Please indicate any restrictions to authorized individuals listed on this form when purchasing
additional Primus product or duplicating keys.
Please fill out a new Primus Signature Card in the event of changes, additions or deletions in authorized signatures and send w ith letter
requesting changes to Schlage at the address below . Primus Signature Cards are available from authorized Schlage Primus distrib utors
and Schlage Commercial upon request. W e suggest that you make a copy of this completed form for your records. A photo copy or fax of
this card will not be accepted.
Please mail the original copy to: IR Schlage
Attn.: Master Key Control Department
2315 Briargate Parkway, Suite 700
Colorado Springs, CO 80920
– F AXED COPIES WILL NOT BE ACCEPTED –
© 2002 Ingersoll-Rand
MS-E130 Rev . 8/05
Effective From:
Date Date
to
Owners Authorization Signature Date
Address (no P.O. Box)
Contact 2 (Please print or type)
Contact 2 Signature
City State Zip Code
Schlage
Attn: Key Control Department
3899 Hancock Expressway
Colorado Springs, CO 80911
Please mail the original copy to:
MS-E130 Rev. 3/14
KeysCylindersCYLINDERS / KEYS / AUXILIARY
409
Price Book 6
Effective July 9, 2018
CL
CL-1
Cylinder housing
6-Pin cylinder
Bar strikes
Strike mounting
screws
Lock body
Cylinder retaining screw Spacers
Lock mounting
screws
CL-Series
Exploded View - CL1000PB
Keys Cylinders CYLINDERS / KEYS / AUXILIARY
410
Price Book 6
Effective July 9, 2018
CL-2
CL
Common Pricing Information
1. Locks are furnished with standard features unless otherwise specied.
2. Door thickness is 1-3/4" unless otherwise specied.
3. Split nishes and designs will be priced at the highest list price of the design and/or nish.
4. Engineering specials are denoted by a part number beginning with “X”.
5. 6 denotes a lock or part that requires an extended lead time.
6. I denotes a handed product and requires handing to be specied.
7. For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus cylinders.
See Terms and Conditions for ordering information and requirements.
8. Locks, keys and cylinders containing restricted keyways require additional documentation to order. Please see Terms and Conditions for the
specic requirements.
9. Keyway must be specied for keyed functions and cylinders. If not specied, default keyway will be S123 for KA, KD and 0-bitted product
and S145 for Factory managed masterkey systems.
10. Multiple keying options are available. Locks and cylinders are furnished KD unless otherwise specied or excepted by notation.
11. Control Keys for permanent and construction cores are not included with the lock or cylinder and must be ordered separately.
12. Locks specied with "C" keyway and KD or 0-bitted will receive 6 pin cylinders (keyed 5).
13. Full Size Interchangeable Cores (FSIC) are furnished 1-bitted unless otherwise specied. If 0-bitted is selected, the order will be entered as
1-bitted. This does not apply to FSIC Primus® cores.
14. Standard pinned cylinders, Primus cylinders (conventional and FSIC) can be supplied 0-bitted. If 1-bitted is selected, the order will be
entered as 0-bitted.
15. Available plug face nishes are 606 and 626. For brass or bronze nish colors, the plug face nish is 606. For chrome, nickel or stainless
steel nish colors, the plug face nish is 626.
16. Locks and cylinders will be furnished with 2 keys each as standard. Additional keys will be charge at the additional cut keys charge
appropriate for the cylinder/key type
KeysCylindersCYLINDERS / KEYS / AUXILIARY
Price Book 6
Effective July 9, 2018 411
CL-3
CL
Introduction
Product Identification
CL 100 PB
Cylinder Suffix
PB = 6-Pin Cylinder
R = Full Size
Interchangeable Coe
G = Everest 29 Patented SFIC
Function (See examples below)
100 = Door Lock
154 = Primus® UL437 Listed
Door Lock
174 = Primus® Controlled
Access Door Lock
200 = Drawer Lock
254 = Primus® UL437 Listed
Drawer Lock
274 = Primus® Controlled
Access Drawer Lock
Lock Series
Finish Codes
and Descriptions
Code Description
605 (US 3) Bright Brass
626 (US 26D) Satin Chromium Plated
Standard Features
Certification ANSI A156.11, 1996, Series 4000, Grade 2
Bar CL100-Series 1” throw; CL200-Series 3/4” throw
Strike 1/2” Bar strike and 1/4” bar strike
Cylinder 6-Pin solid brass, keyed 6-pin, S123 keyway, keyed different (KD)
Door Range Spacers and strikes will accommodate doors 7/8”, 1”, and 1 1/8” thick
Keys Two nickel silver cut keys per lock, 6-pin, S123 section**
Table of Contents
Complete Locks CL-4
CL-Series: Conventional Offering ..........................CL-4
CL-Series: Full Size
Interchangeable Core Offering ............................CL-5
CL-Series: Small Format
Interchangeable Core Offering ........................... CL-6
Options CL-7
Strikes ....................................................CL-7
Non-Standard Door Thickness ........................... CL-7
Special Locks .............................................CL-7
Parts CL-8
Trim Collars ............................................. CL-8
Strikes ................................................... CL-8
Adapters ................................................. CL-8
Screws ................................................... CL-8
Drivers and Accessories .................................. CL-8
Cam Options ............................................. CL-8
Ratchet Lock Accessories .................................CL-8
Trim Collar Options .......................................CL-8
Complete Cylinders See Cylinders Section
How To Order Forms & Examples
Keys Cylinders CYLINDERS / KEYS / AUXILIARY
412
Price Book 6
Effective July 9, 2018
CL-4
Conventional Offering
CL • Complete Locks
CL100PB CL200PB
CL-Series
Function Description
Finishes
605
626
Keyed
Open Restricted
CL100PB Door cabinet lock, 6-pin cylinder, 1” bolt throw $144.00 $161.00
CL200PB Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw
CL-Series: Primus XP/ Primus Controlled Access
Primus cylinders are offered for sale through specific channels of distribution based on security levels
See Terms & Conditions for more information
Function Description
Finishes
605
626
Keyed
CL174PB Door cabinet lock, 6-pin cylinder, 1” bolt throw
$169.00
CL174PB-XP Door cabinet lock, 6-pin cylinder, 1” bolt throw
CL274PB Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw
CL274PB-XP Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw
CL-Series: Primus XP/ Primus High Security UL 437
Primus cylinders are offered for sale through specific channels of distribution based on security levels.
See Terms & Conditions for more information.
Function Description
Finishes
605
626
Keyed
CL154PB Door cabinet lock, 6-pin cylinder, 1” bolt throw
$195.00
CL154PB-XP Door cabinet lock, 6-pin cylinder, 1” bolt throw
CL254PB Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw
CL254PB-XP Drawer cabinet lock, 6-pin cylinder, 3/4” bolt throw
Notes: Keying options: see Keys & Keying.
For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to
Primus families. See Terms & Conditions for more information.
Primus locks are furnished 0-bitted, with two 6-pin keys entered as a separate line item, unless otherwise specified.
Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $16.40 per cylinder.
KeysCylindersCYLINDERS / KEYS / AUXILIARY
413
Price Book 6
Effective July 9, 2018
CL-Series: Full-Size Interchangeable Core
Function Description
Finishes
605 626
Keyed
Open Restricted
CL777R Door cabinet lock, FSIC, 1” bolt throw $177.00 $194.00
CL888R Drawer cabinet lock, FSIC, 3/4” bolt throw
CL920R FSIC Cam Lock 135.00 152.00
CL-Series: Full Size Interchangeable Core Ratchet Lock
Function Description
Finishes
605 626
Keyed
Open Restricted
CL929R Ratchet Lock, FSIC $175.00 $192.00
CL-Series: Full-Size Interchangeable Core Primus XP/ Primus Controlled Access
Function Description
Finishes
605 626
Keyed
CL774R Door cabinet lock, FSIC, 1” bolt throw
$206.00
CL774R-XP Door cabinet lock, FSIC, 1” bolt throw
CL874R Drawer cabinet lock, FSIC, 3/4” bolt throw
CL874R-XP Drawer cabinet lock, FSIC, 3/4” bolt throw
CL974R FSIC Cam Lock 179.00
CL974R-XP FSIC Cam Lock
Complete Locks • CL
Full Size Removable Core Offering
CL777R CL888R CL920R
Full Size Interchangeable Core Option
Description Specify Price
Full Size Construction Core * T sufx Example: N/C
Less Full Size Core J sufx Example: Deduct $34.00
from lock price
*Locks are assessed a non-refundable handling charge (50-231) per core. See Keys & Keying .
Notes: Keying options: see Keys & Keying.
For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00. This does not apply to Primus
families. See Terms & Conditions for more information.
Specify LKB if 0-bitted Primus cylinders are required “Less Key Blanks.” Deduct $16.40 per cylinder.
CL-5
Keys Cylinders CYLINDERS / KEYS / AUXILIARY
414
Price Book 6
Effective July 9, 2018
CL-6
CL • Complete Locks Small Format Interchangeable Core Offering
CL721G CL771G CL725G CL775G
CL720G CL728G CL729G
CL-Series: Everest Restricted Small Format Interchangeable Core
Function Description
Finishes
626
Keyed
Open
CL721G Door cabinet lock, SFIC, 1” bolt throw
$141.00
CL771G Drawer cabinet lock, SFIC, 3/4” bolt throw
CL725G Everest Patented SFIC Rim Latch Lock
CL775G Everest Patented SFIC Rim Deadbolt Lock
CL-Series: Everest Restricted Small Format Interchangeable Core
Function Description
Finishes
626
Keyed
Open
CL720G Everest Patented SFIC Cam Lock $133.00
CL728G Everest Patented SFIC Mail Box Lock 110.00
CL729G Everest Patented SFIC Ratchet Lock 169.00
Notes: For small format construction core, specify suffix HD. Example: B560HD. Available at no additional charge. Locks
are assessed one non-refundable handling charge (50-231) per core. See Keys & Keying for details.
Please refer to Everest small format interchangeable core key control policies, under the Terms & Condition Section.
KeysCylindersCYLINDERS / KEYS / AUXILIARY
415
Price Book 6
Effective July 9, 2018
CL-7
Options • CL
Strikes, Non-Standard Door Thickness,
Special Locks
CL10-355 CL10-354
Shaded items are standard components and are
furnished with locks unless otherwise specified.
Strikes
Description Specify
Add to
Lock Price
Bar strike, 3/4” x 1 31/32” x 1/2”, standard CL10-355 N/C
Bar strike, 3/4” x 1 31/32” x 1/4”, standard CL10-354
Non-Standard Door Thickness
Description Specify
Add to
Lock Price
Lock for 1 3/8” door 1 3/8” door thickness - for CL door and drawer locks $3.10
Special Locks
6 Extended Factory Lead Time
Function Description
Price
Each
XB03-232 Cabinet Lock for doors 1/8” to 3/4” thick $577.00
XB03-232P Primus Cabinet Lock for doors 1/8” to 3/4” thick 577.00
XB06-530 Cabinet Lock for doors over 7/8” to 2” thick 695.00
XB06-530P Primus Cabinet Lock for doors over 7/8” to 2” thick 695.00
Notes:: For slotted strike (CL10-352), see CL Parts: Strikes, Page CL-6.
Locking provided by swinging cam. Attached to door with hex nut.
Keying options: see Keys & Keying.
If you are unable to find your required hardware solution in this price book, please refer to our Custom Product Request Process on page iv.
For all restricted keyways (Everest D, Everest 29 T, Quad, Numbered, Reversed) add $17.00.
This does not apply to Primus families. See Terms & Conditions for more information.
Specify door hand and door thickness.
Keys Cylinders CYLINDERS / KEYS / AUXILIARY
416
Price Book 6
Effective July 9, 2018
CL-8
36-031
CL10-352 CL10-354 CL10-355
CL • Parts Trim Collars, Strikes, Adapters, Screws
Drivers and Accessories, Trim Collars
Trim Collars
Part Number Finish Description Price Each
36-031 • 1 3/16” diameter x 5/8” depth $10.80
Adapters
Part Number Description Price Each
CL10-350 Spacer $2.90
CL729-Ratchet Locks Accessories
Part Number Description Price Each
CL729S-2 Optional strap for 3/8” material thickness $9.10
CL729S-3 Optional strap for 5/8” material thickness 13.00
Screws
Part Number Description Price Each
CL10-301 Retaining screw $0.44
Drivers and Accessories for CL100/200/ 725/721/ 777/888 Series
Part Number Description Price Each
CL10-360 Universal Driver bar for CL100/ 200 $2.60
CL10-361 Driver bar for CL100/ 200PB 2.60
CL10-362 Driver bar for CL100/ 200PB 1 3/8” long 2.60
CL7788-PA-D Actuator for FSIC CL locks 2.20
CL725-1 Spacer for 6 pins SFIC 2.00
CL-ETS1 External trim plate spacer 2.80
CLTR78 Trim rings 626 or 605 3.00
CL-720G Cam
Part Number Description Price Each
CL720-3-1 CL720 short cam inverted hand $2.90
CL720-3-2 CL720 long inbent cam, vertical hand 2.90
CL720-3-3 CL720 long offset cam, inverted hand 2.80
CL720-3-4 CL720 long straight cam, vertical hand 3.10
CL720-3-5 CL720 long shall offset cam, inverted hand2.40 2.00
CL775-SP Strike pack for CL775 (Latch lock) 2.90
CL725-SP Strike pack for CL725 (Deadbolt lock) 2.80
CL720/920 Trim Collars
Part Number Description Price Each
TR201 Trim collar for CL720/ 920, 1/8” (626,605)$3.30 $2.90
TR202 Trim collar for CL720/ 920, 1/4” (626,605) 4.89
TR203 Trim collar for CL720/ 920, 3/8” (626,605) 5.20
TR200A Trim collar package for CL720/ 920, includes all three 14.50
Strikes
Part Number Description Price Each
CL10-352 Slotted strike
$2.90 CL10-354 Bar strike, 3/4” x 1 31/32” x 1/4”, standard
CL10-355 Bar strike, 3/4” x 1 31/32” x 1/2”, standard
Merchandising AidsTOOLS AND KITS
417
Price Book 6
Effective July 9, 2018
Tools-1
Introduction TOOLS & KITS
Table of Contents
Keying Tools & Kits Tools-2
Full Size Pin Kits ...................................... Tools-2
Full Size Keying Tools ................................ Tools-3
Small Format Interchangeable Core Pin Kits .......... Tools-4
Small Format Interchangeable
Core Service Equipment ............................... Tools-4
Competitive Keying Kits .............................. Tools-5
Competitive Keying Tools ............................ Tools-5
Tools Tools-6
Installation Templates ................................ Tools-6
Installation Tools ......................................Tools-7
Torx® Tools ............................................Tools-7
Kits Tools-8
Portable Security Repair Kit .......................... Tools-8
Home Secure RCK Accessories ........................ Tools-8
Maintenance Kits (Replacement Parts Assortments) .. Tools-8
Installation JIG ........................................ Tools-9
Mortise JIG (wood) ....................................Tools-10
How To Order Forms & Examples
Merchandising Aids TOOLS AND KITS
418
Price Book 6
Effective July 9, 2018
Tools-2
Full Size Pin Kits
TOOLS & KITS • Keying Tools & Kits
40-119 40-133 40-134
Full Size Pin Kits
Part
Number Description Contents
Price
Each
40-070 Primus pin kit Sidebars Finger pins Sidebar springs $493.00
Finger pin springs Plug holder
40-119 Pin kit, seal-tight metal box Bottom pins Retainer cap pins Cylinder Cap Removal Tool 420.00
Master pins Retainer cap pin springs
Top pins Shim stock
Pin springs Tweezers
Retainer caps Follower bar
40-132 Retail Keying Kit, seal-tight
metal box
Bottom pins B-Series cylinder bars T-Pin Spring 236.00
Top pins Key gage T-Pin
Pin springs Follower bar Removable Cap
Cylinder caps Cap-removal tool
Cap spring and pins Retaining Rings
40-133 Home Secure™ Pin kit Bottom pins Tweezers Construction balls 407.00
Top pins Retaining rings Retainer cap pins
Master pins Retainer caps T-Pin Spring
Follower bar Retainer cap pin springs T-Pin
Removal tool B-Series cylinder bars Removable Cap
Key gage B-Series drivers
Cylinder springs Shim stock
40-134 Pin kit, snap-tight plastic box Bottom pins Key gage Removable Cap 117.00
Top pins Follower bar
Pin springs T-Pins Spring
Retainer cap pins T-Pin
Note: 1) For replacement pins and springs, see Cylinders.
Merchandising AidsTOOLS AND KITS
419
Price Book 6
Effective July 9, 2018
Tools-3
Full Size Keying Tools Keying Tools & Kits • TOOLS & KITS
* Adds Everest C and Everest 29 S Family capability to Blue Punch key machines
(designed for Obverse keys) with serial numbers below 990358,
manufactured before July 1999.
** For all Standard and Primus keys with Obverse, Everest C and
Everest 29 S Family sections only.
®
PRO-LOK
BLUE PUNCH #BP201
PRO-LOK TOOLS & ACCESSORIES
ORANGE, CA 92667
9
9
8
5
21
0
876543210
P
R
O
F
E
S
S
I
O
N
A
L
Q
U
A
L
I
T
Y
T
O
O
L
S
PRO-LOK
40-104 40-074 40-075
M204-200
M540-051
40-099
M540-056
®
7 6 4 3
M540-000
Aluminum follower and
Master Pin Remover
Full Size Keying Tools
Part
Number Description
Price
Each
40-066 Primus® plug holder $128.00
40-074* Everest vise jaw upgrade kit 91.00
40-075** Key bitting punch for Everest C Family,
Everest 29 S and Obverse keyway families
3,065.00
40-104 Key gage (All Schlage keys except SFIC) 14.80
40-099 Key bitting punch for Everest D and Everest 29 T Families 3,674.00
M204-168 Lubriplate 9.00
M204-200 Tweezers 39.40
M204-201 Shim (pack of 25) 30.80
M540-051 Follower 3.30
M540-056 Cylinder cap removal tool 57.50
M540-000 Aluminum Follower and Master Pin Remover 57.70
M504-548 Follower for Modular Cylinder 19.00
Merchandising Aids TOOLS AND KITS
420
Price Book 6
Effective July 9, 2018
Tools-4
TOOLS & KITS • Keying Tools & Kits Small Format Interchangeable Core Pin
Kit and Service Equipment
®
7 6 4 3
PRO-LOK
BLUE PUNCH #BP201
PRO-LOK TOOLS & ACCESSORIES
ORANGE, CA 92667
9
9
8
5
21
0
876543210
P
R
O
F
E
S
S
I
O
N
A
L
Q
U
A
L
I
T
Y
T
O
O
L
S
PRO-LOK
40-071
Everest B and Everest 29 R Family Key
Bitting Punch
40-181
Falcon/Best® SFIC Key Bitting Punch
9 8 7 6 5 4 3 2 1 0
40-128
SFIC Key Gage
40-171
IC Decode, Dump Tool
40-172
Ejector Pin
40-173
Staking Tool
* For service of this key
machine, contact:
Pro-Lok
655 North Hariton St.
Orange, CA 92668
(714) 633-0681
FAX (714) 633-0471
SL Cylinder 7 pin A2 Pinning Kit
Part Number Description Contents Price Each
40-247 SL A2 Pin Kit L Pins, Single Cut (25 each)
L Pins, Master pins (25 each)
L Pin Springs
Locking Side Bar
Locking Side Bar Springs
SL Plug Clip
SL Plug Cover
SL End Cap
SL End Cap Pin
SL End Cap Pin Spring
Everest SFIC Check Pin
Everest SFIC Check Pin Spring
A2 Key System Key Gauge
Plug Holder Crimp Tool
Tweezers
$1,304.00
SL Cylinder Plug Holder and CrimpTool
Part Number Description Price Each
40-296 SL Plug Holder Crimp Tool $137.00
Small Format Interchangeable Core Service Equipment
Part Number Description Price Each
40-071* Key bitting punch, Everest B and Everest 29 R Family keys only $3,856.00
40-128 Key gage, A2 system 17.50
40-181 Key bitting punch, Falcon/Best® 3,632.00
40-171 IC decode, rekey, dump tool 260.00
40-172 Ejector Tool 49.00
40-173 Staking Tool 49.00
Small Format Interchangeable Core Pin Kits
Part Number Description Contents Price Each
40-129 A2 System pin kit Blocking pin springs
Blocking pins
Bottom pins
Caps
Master/build-up/top pins
Tumbler spring
Plug retainers
Capping block
Capping tool
Ejector tool
Key gage
Tweezers
$820.00
Note: 1) For pin kit refills, see Cylinders.
Merchandising AidsTOOLS AND KITS
421
Price Book 6
Effective July 9, 2018
Tools-5
Installation Tools • TOOLS & KITS
40-026
1 1/2” Bushing (old style)
40-286
Universal Clamp
40-226
AL & ND Template
40-227
L-Series Template (front side)
40-152
1 3/8” Thick Door Adapter
x 2 3/8” Backset
40-228
H-Series Template
40-153
5” Backset Adapter
40-158
Mortise Pocket Filler (edge)
40-029 40-030
Strike Marking Chisels
40-031
1” Front
40-032
1 1/8” Front
Latch Marking Chisels
Merchandising Aids TOOLS AND KITS
422
Price Book 6
Effective July 9, 2018
Installation Tools
Part
Number
Description Price
Each
40-017 AL and D-Series Lever castle nut wrench $13.70
40-026 Bushing, 1 1/2”, for 40-012 jig 51.90
40-029 Strike marking chisel - full lip strikes 82.90
40-030 Strike marking chisel - 1 1/8” x 2 3/4” 91.70
40-031 Latch marking chisel - 1” x 2 1/4” 79.10
40-032 Latch marking chisel - 1 1/8” x 2 1/4” 79.10
40-049 Tool box, for 40-006 kit 292.00
40-112 Circular strike bit for machine equipment 903.00
40-152 Backset Adapter for 1-3/8” doors and/or
2-3/8” Backset
233.00
40-153 Backset Adapter for 5” Backset 159.00
40-158 L-Series mortise pocket filler (edge) 169.00
40-035 Strike locator - 7/8” 53.40
40-015 7/8” Boring bit 200.00
40-179 Strike locator - 1” 53.70
40-175 1” Boring bit 103.00
40-176 2-1/8” Multi-spur bit 260.00
40-177 1-1/2” Muliti-spur bit 225.00
24002693 ND & L Lever removal tool 22.70
24341471 ND & L Lever removal tool - 20 pack 416.00
M204-198 Boring jig - ND and AL series locks 16.30
M504-271 Tool to remove AL and D-Series levers 1.60
M504-306 Circular faceplate wrench 2.60
021415 Spanner wrench, D-Series Knobs and L-Series 4.20
M504-347 Socket screw key, for 40-012 jig 3.50
M504-413 Installation tool, interchangeable core 17.40
N523-108 Tool to remove AL and D-Series levers 1.70
40-226 Installation template - AL, ND, NDE series 332.00
40-227 Installation template - L series 437.00
40-228 Installation template - H series 402.00
40-286 Universal Clamp 449.00
Tools-6
TOOLS & KITS • Tools Installation Tools
M504-413
N523-108
M204-198
M504-271
021415
Torx® Tools
Part Number Description Price Each
M504-424 Tool T-8 $42.00
M504-425 Tool T-15
40.50
M504-426 Tool T-20
M504-427 Tool T-30
M504-428 Tool T-10
Merchandising AidsTOOLS AND KITS
423
Price Book 6
Effective July 9, 2018
Tools-7
RCK Accessories, Maintenance Kits Kits • TOOLS & KITS
KZ390AL
Portable Security Repair Kit
Home Secure RCK Accessories
Part
Number Description
Price
Each
P513-024 Home Secure Construction Key Envelopes 0.44
P513-023 Home Secure Owner Key Envelopes 0.44
34-401 Home Secure Replacement Construction Balls (pack of 32.00
1,000 construction balls)
Portable Security Repair Kits
Part
Number Description
Price
Each
KZ390AL
Portable Security Repair Kit supports all Portable
$468.00Security Commercial Padlocks and Locking Cables,
SFIC and KNK. See PS-9 for additional details.
Maintenance Kits (Replacement Parts Assortments)
Part
Number Description
Price
Each
40-054 L-Series maintenance kit $936.00
40-097 ND-Series lever maintenance kit 649.00
40-223 Modular Cylinder Service Kit 1,006.00
Merchandising Aids TOOLS AND KITS
424
Price Book 6
Effective July 9, 2018
TOOLS & KITS • Kits Installation Kits
40-147
Complete Installation Kit
40-148
Installation JIG
M504-497
Case Only
40-176
2 1/8” Multi Spur Bit
40-177
1 1/2” Multi Spur Kit
40-175 1” Bit
40-015 7/8” Bit
40-179
1” Strike Locator
40-035
7/8” Strike Locator
40-029
Full Lip Strike Chisel
40-030
1 1/8” x 2 3/4”
Strike Chisel
40-031
1” x 2 1/4” Latch Chisel
40-032
1 1/8” x 2 1/4”
Latch Chisel
Tools-8
Installation Kits
Part
Number
Description Contents Price
Each
40-147 Installation Kit for Locksets & Deadbolts
Kit includes JIG, Case, (2) Multi-spur bits, (4) latch/strike chisels,
(2) Bushing Plates, 1” Auger bit & strike locator
40-148
M504-497
40-176
40-177
40-030
40-175
40-179
40-029
40-031
40-032
$2,453.00
M504-497 Case Only —217.00
40-148 Installation JIG only —1,858.00
Notes: 1) For F-Series installation, 40-015 and 40-035 (Page Tool-7) is required.
2) For 40-147, doors requiring thrubolt holes and/or 7/8” edge bores, bits sold separately. Reference Tool-7.
Merchandising AidsTOOLS AND KITS
425
Price Book 6
Effective July 9, 2018
Installation Kits Kits • TOOLS & KITS
Tools-9
40-160
Mortise Lock JIG
40-161
5/8” Wood Cutter Bit
40-162
11/16” Wood Cutter Bit
40-163
3/4” Wood Cutter Bit
40-164
13/16” Wood Cutter Bit
40-165
7/8” Wood Cutter Bit
40-166
15/16” Wood Cutter Bit
40-167
1” Wood Cutter Bit
40-168
1 1/16” Wood Cutter Bit
40-169
1 1/4” Wood Cutter Bit
40-170
Long Boring Shaft
Installation Kits
Part
Number
Description Contents Price
Each
40-160 Installation kit for mortise lock
Kit includes: Jig, Case (3 wood
cutter bits and long boring shaft)
40-160
40-165
40-167
40-169
40-170
$1,290.00
Installation Tools
Part Number Description Price Each
40-161 5/8” Woodcutter Bit $121.00
40-162 11/16” Woodcutter Bit 121.00
40-163 3/4” Woodcutter Bit 121.00
40-164 13/16” Woodcutter Bit 121.00
40-165 7/8” Woodcutter Bit 132.00
40-166 15/16” Woodcutter Bit 132.00
40-167 1” Woodcutter Bit 132.00
40-168 1-1/16” Woodcutter Bit 132.00
40-169 1-1/4” Woodcutter Bit 161.00
40-170 Long boring shaft for locks up to 6” 252.00
Merchandising Aids TOOLS AND KITS
426
Price Book 6
Effective July 9, 2018
Tools-10
TOOLS & KITS • Kits Notes
Tools and KitsTOOLS AND KITS
427
Price Book 6
Effective July 9, 2018
Merch-1
Introduction MERCHANDISING AIDS
Table of Contents
Display Mounts .......................................Merch-3
Solid Oak Mounts .................................... Merch-3
Special Parts ......................................... Merch-3
Miscellaneous Merch-4
Finish Selector Kit ................................... Merch-4
Plastic Lock Case Cover .............................. Merch-4
Promotional Items .................................. Merch-4
How To Order Forms & Examples
Product literature is available, contact Customer Service.
Tools and Kits TOOLS AND KITS
428
Price Book 6
Effective July 9, 2018
Merch-2
Solid Oak Mounts
MERCHANDISING AIDS • Display Mounts
Solid Oak Mounts
44-104 44-105 44-106*44-107
44-108 44-109* 44-110 44-111
44-112 44-113 44-119* 44-120*
44-121
®
®
®
®
®
®
®
®
®
®
®
®
* Top and bottom holes are 4” center to center.
®
XL11-806
®
?Commercial Price Book 6
Effective Marc h 1, 2006
44-161
®
44-162
®
Tools and KitsTOOLS AND KITS
429
Price Book 6
Effective July 9, 2018
Merch-3
Display Mounts • MERCHANDISING AIDS
Display Mounts
Dimensions
Part
Number Description A B C Overall
Price
Each
44-104 B (except BR260 & B260E) 2 3/8" 1 1/2" 1 1/8" 6" x 9 1/2" $102.00
44-105 A, F, B (single) and BE 2 3/8" 2 1/8" 1" 6" x 9 1/2" 102.00
44-106 A with B, F, FE,and H (double) 2 3/8" 2 1/8" 1" 6" x 14" 122.00
44-107 A, F, B (triple) 2 3/8" 2 1/8" 1" 6" x 14" 130.00
44-108
A, F, B (quadruple)
2 3/8"2 1/8" 1" 6" x 24 1/2" 163.00
44-109 F, FE300 2 3/8" 2 1/8" 1" 6" x 24 1/2" 134.00
44-110* L9000 2 3/4" — — 8 1/2" x 14" 140.00
44-111 A, B600/700/800, D Knob, S (single) 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" 148.00
44-112 D Lever, AL (single), ND Lever 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 14" 181.00
44-113 A, S, D Knob (triple) 2 3/4" 2 1/8" 1 1/8" 8 1/2" x 24 1/2" 210.00
44-115 Clear plastic mount ring —2 1/8" — 2 1/2" x 1" 41.90
44-119 F300 BOW 2 3/8" 1 1/2" (top)
2 1/8" (bottom) 1" 6" x 24 1/2" 141.00
44-120 F300 CEN 2 3/8" 1 1/2" (top)
2 1/8" (bottom) 1" 6" x 24 1/2" 130.00
44-121 S200, H 2 3/8" 1 1/2" (top)
2 1/8" (bottom) 1" 6" x 14" 142 .00
44-161
FE
& BE
Keypad Lock Mount
2 3/8" 2 1/8" 1" 6" x 14"96.50
44-162 FE & BE Keypad Lock &
Keypad Deadbolt Mount 2 3/8" 1 1/2" (top)
2 1/8" (bottom) 1" 6 " x 19 " 124.00
44-165
CS200, FE400, H200 5 1/2" mount
2 3/8" 2 1/8" 1" 133.00
44-166
CS200, FE400, H200 4" mount
2 3/8" 2 1/8" 1" 133.00
* For special L lock mount, see Special Parts.
Notes: 1) Price does not include lock.
2) L400-Series mounts are not available.
Display Mounts, Special Parts
Special Parts
6 Extended Factory Lead Time
Part Number Description Price Each
XL11-806 Modified 44-110 display mount with see-through window $507.00
Note: 1) If you are unable to find your required hardware solution in this price book, please use the Schlage Innovation Center
Process in the forms and example section.
Tools and Kits TOOLS AND KITS
430
Price Book 6
Effective July 9, 2018
Merch-4
Finish Selector Kit, Plastic Lock Case Cover,
Promotional Items,
MERCHANDISING AIDS • Miscellaneous
39-029
Finish Selector Kit
Part Number Description Price Each
39-029 Finish selector kit
Finishes: 505, 605, 606, 609, 612, 613, 619, 620, 622, 625, 626, 629, 630, 716, 643e
$38.40
Plastic Lock Case Cover
Part Number Description Price Each
39-042 Plastic lock case cover (for display), L-Series $76.00
Modular Cylinder Sales Kit
Part Number Description Price Each
40-224 Contents:
FSIC Classic, SFIC Everest 29 R, Primus XP Classic, Everest 29 S, Everest 29 S Primus XP,
Mortise Modular Cylinder, Rim Modular Cylinder
$666.00
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
431
Price Book 6
Effective July 9, 2018
01-001 ................. 65
01-002................. 65
01-008 ................ 65
01-009 ................ 65
01-018 ................. 65
01-026................. 65
01-053................. 65
01-055................. 67
01-056................. 67
01-057 . . . . . . . . . . . . . . . . . 67
01-058................. 67
01-060 ................ 67
01-063................. 67
02-037................. 324
03-000 ................ 110
03-030 ................ 110
03-031 ................. 110
03-032 ................ 110
03-042 ................ 112
03-200 ................ 110
03-230 ................ 110
03-231 ................. 110
03-232................. 110
03-233................. 110
03-234................. 110
03-235................. 110
03-236................. 110
03-237 ................. 110
03-244 ................ 110
03-255................. 110
03-266 ................ 110
03-277 . . . . . . . . . . . . . . . . . 110
04-001 ................ 92
04-002 . . . . . . . . . . . . . . . . 92
04-006................ 92
04-007 ................ 92
04-020 . . . . . . . . . . . . . . . . 93
04-021................. 93
04-022 ................ 93
04-023 ................ 93
04-025 ................ 93
04-026 ................ 93
04-030 . . . . . . . . . . . . . . . . 92
04-031................. 92
04-033 ................ 92
04-034 ................ 92
04-060................ 79
06-242 ................ 230
08-000................ 254
08-020 ................ 252
08-020 xxx ............ 272
08-021................. 272
08-027 ................ 252
08-027 xxx ............ 272
08-029 ................ 230
08-030 ................ 252
08-030 xxx ............ 272
08-032 ................ 252
08-034 ................ 252
08-035 ................ 252
09-019................. 310
09-060................ 113
09-061................. 113
09-062 ................ 113
09-063 ................ 113
09-138................. 192
09-139................. 192
09-155 ................. 192
09-156................. 192
09-157 ................. 192
09-158................. 192
09-159................. 192
09-189................. 192
09-195................. 310
09-196................. 310
09-197 . . . . . . . . . . . . . . . . . 310
09-198................. 310
09-199................. 310
09-200 ................ 310
09-401................. 183, 213
09-402 ................ 183, 213
09-403 ................ 183, 213
09-403 xx ............. 263
09-404 ................ 183, 213
09-409 ................ 307
09-410................. 307
09-411 ................. 307
09-412................. 307
09-416................. 310
09-417 . . . . . . . . . . . . . . . . . 310
09-418................. 310
09-446 ................ 180
09-447 ................ 180
09-449 ................ 180
09-451................. 180
09-454 ................ 180
09-455 ................ 180
09-456 ................ 180
09-459 ................ 263
09-473................. 181
09-474 ................ 181
09-475 ................ 181
09-477................. 181
09-483 134 ............ 182
09-483 138 ............ 182
09-483 200 ........... 182
09-483 212 ............ 182
09-483 214 ............ 182
09-484 114............. 181
09-484 118............. 181
09-484 138 ............ 181
09-485 114............. 181
09-485 118............. 181
09-485 138 ............ 181
09-486 . . . . . . . . . . . . . . . . 263
09-487 xx.............. 186, 215
09-488 134 ............ 182
09-488 138 ............ 182
09-488 200 ........... 182
09-488 212 ............ 182
09-488 214 ............ 182
09-493 ................ 182
09-494 ................ 181
09-494 112............. 181
09-494 1316 ........... 181
09-502 ................ 263
09-506 . . . . . . . . . . . . . . . . 184, 214
09-508 . . . . . . . . . . . . . . . . 183, 213
09-509 027............ 186, 215
09-509 033............ 186, 215
09-509 040 ........... 186, 215
09-509 047............ 186, 215
09-550 ................ 184, 214
09-551................. 184, 214
09-552 ................ 184, 214
09-553 ................ 184, 214
09-554 ................ 214
09-555 ................ 214
09-611 ................. 188
09-632 ................ 183, 213
09-633 ................ 183, 213
09-634 ................ 183, 213
09-635 ................ 183, 213
09-636 ................ 183, 213
09-637 ................ 183, 213
09-638 ................ 183, 213
09-639 ................ 183, 213
09-640 ................ 213
09-641................. 213
09-655 ................ 184, 214
09-661................. 185
09-662 ................ 185
09-663 ................ 185
09-664 . . . . . . . . . . . . . . . . 185
09-665 ................ 185
09-666 ................ 185
09-667 ................ 185
09-668 ................ 185
09-669 ................ 185
09-670 ................ 185
09-671 ................. 185
09-672................. 185
09-713 ................. 185
09-717 ................. 185
09-718 . . . . . . . . . . . . . . . . . 185
09-751 ................. 307
09-752................. 307
09-753................. 307
09-754................. 307
09-756................. 310
09-757 ................. 310
09-764 ................ 307
09-765................. 307
09-766 ................ 307
09-767................. 307
09-774................. 113, 346
09-833 ................ 307
09-834 ................ 307
09-835 ................ 307
09-836 ................ 307
09-900 xx ............. 186, 215
09-904 xx ............. 186, 215
09-905 . . . . . . . . . . . . . . . . 186, 215
09-907 ................ 215
09-992 ................ 360
09-993 ................ 360
09-994 . . . . . . . . . . . . . . . . 360
09-995 ................ 360
09-996 ................ 360
09-997 ................ 360
09-998 ................ 360
10-001 ................. 123, 229, 253, 263, 272
10-001 100............. 66, 80
10-001 112.............. 66, 80
10-001 114.............. 66, 80
10-001 118.............. 66, 80
10-001 134 ............. 66, 80
10-001 200 ............ 66, 80
10-001 xx .............. 123, 263, 272
10-004 ................ 66, 80, 123, 263, 272
10-013-112.............. 93, 112
10-013-118 ............. 93, 112
10-016 ................. 93, 112
10-025 112.............. 66, 80
10-025-112 ............. 93, 112
10-025 138 ............. 66, 80, 272
10-025-138 ............ 93, 112
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
432
Price Book 6
Effective July 9, 2018
10-025 1316 ............ 66, 80, 123, 263, 272
10-025-1316............ 93, 112
10-025 xx .............. 123, 263
10-026................. 66, 80, 229, 253, 263,
272
10-027 ................. 66, 80, 229, 253, 263,
272
10-058................. 66, 80, 253
10-064................. 134, 146, 253
10-072 1316 ............ 185
10-072 xx.............. 185
10-073 ................. 185
10-075 ................. 185
10-078................. 185
10-079 ................. 185
10-087................. 134, 146
10-091 ................. 185
10-092................. 134, 146, 229, 253
10-094................. 134, 146, 229, 253
10-095................. 134, 146, 229, 253
10-103 ................. 134, 146
10-104 ................. 134, 146
10-108 ................. 134
10-109 ................. 229, 253
10-110.................. 253
10-111................... 253
10-112 .................. 134, 146, 253
10-116 .................. 229
10-121 .................. 229
10-122.................. 229
10-123.................. 229
10-124.................. 229
10-140 ................. 113
10-141 .................. 113
10-142.................. 113
10-143.................. 113
10-251.................. 253
10-253 ................. 253
10-256 ................. 253
10-257 ................. 253
10-258 ................. 253
10-259 . . . . . . . . . . . . . . . . . 253
11-068 ................. 65, 80
11-069 ................. 65, 80
11-085 ................. 65, 80
11-088 ................. 65, 80
11-091 .................. 65, 80
11-092 ................. 65, 80
11-096 ................. 65, 80
11-103 .................. 65, 80
11-104 .................. 65, 80
11-105 .................. 65, 80
11-110................... 65, 80
11-111 ................... 65, 80
11-112................... 65, 80
11-113................... 65
11-116................... 65, 80
11-118................... 65, 80
12-100 ................. 123
12-103.................. 123
12-287 ................. 134
12-288 ................. 134, 252
12-289 ................. 134, 252
12-290 ................. 134
12-291 .................. 134, 229, 252
12-297.................. 146
12-317 .................. 146
12-339 ................. 229
12-340 ................. 229
12-617 .................. 147
12-618.................. 147
12-625 ................. 147
12-626 ................. 134, 147
12-627 ................. 146
12-628 ................. 146
12-630 ................. 146
12-631.................. 146
12-632 ................. 146
12-633 ................. 134, 146, 229, 252
12-640 ................. 146
12-641.................. 146
12-642 ................. 146
12-643 ................. 146
12-650 ................. 146
12-651.................. 146
12-652 ................. 146
12-653 ................. 146
13-247.................. 92, 112
13-248 ................. 92, 112
14-010 ................. 92, 112
14-028................. 92, 112
14-042................. 92, 112
14-047 ................. 92, 112
14-048................. 92, 112
16-132.................. 229, 253, 272
16-203 ................. 272
16-204 ................. 253, 272
16-228 ................. 229, 253
16-260................. 229
16-480................. 253
16-481 ................. 253
16-482 ................. 253
16-483 ................. 229, 253
16-484................. 229, 253
20-001................. 195, 330, 339
20-001-118............. 352
20-002 ................ 330
20-009 ................ 349
20-013................. 331
20-021................. 343
20-022 ................ 343
20-030 ................ 352
20-033 ................ 352
20-057................. 344
20-059 ................ 335
20-060 ................ 336
20-061................. 335
20-062 ................ 336
20-066 ................ 352
20-067 ................ 352
20-069 ................ 352
20-071 . . . . . . . . . . . . . . . . . 320
20-071-XP ............. 320
20-072................. 320
20-072-XP............. 320
20-079 ................ 344
20-090 ................ 336
20-091................. 336
20-172 ................. 317
20-174 ................. 317
20-188................. 137, 320
20-188-XP ............. 137, 320, 322
20-189................. 137, 320
20-189-XP ............. 137, 320
20-190................. 137, 320
20-190-XP ............. 137, 320
20-191 ................. 137, 320
20-191-XP.............. 137, 320
20-200 ................ 311
20-201 ................. 311
20-202 ................ 311
20-203 ................ 311
20-204 ................ 311
20-205 ................ 311
20-206 ................ 311
20-207................. 311
20-208 ................ 311
20-209 ................ 311
20-210 ................. 311
20-211.................. 311
20-212 ................. 311
20-213 ................. 311
20-214 ................. 311
20-215 ................. 311
20-216 . . . . . . . . . . . . . . . . . 311
20-217 ................. 311
20-218 . . . . . . . . . . . . . . . . . 311
20-219 . . . . . . . . . . . . . . . . . 311
20-220 ................ 311
20-221 ................. 311
20-222................. 311
20-223................. 311
20-224................. 311
20-225................. 311
20-226................. 311
20-227 ................. 311
20-228................. 311
20-229................. 311
20-500 ................ 195, 330
20-500-XP ............ 195, 330
20-501................. 195, 330
20-501-XP ............. 195, 330
20-505 ................ 349
20-505-XP............. 349
20-506 ................ 331
20-506-XP ............ 331
20-508 ................ 331
20-508-XP ............ 331
20-509 ................ 343
20-509-XP ............ 343
20-510................. 343
20-510-XP ............. 343
20-515 . . . . . . . . . . . . . . . . . 195, 330
20-515-XP ............. 195, 330
20-516 ................. 343
20-516-XP ............. 343
20-517 ................. 195, 219, 330
20-517-XP.............. 195, 219, 330
20-518 ................. 331
20-518-XP ............. 331
20-519 ................. 347
20-519-XP ............. 347
20-520 ................ 347
20-520-XP............. 347
20-523................. 348
20-523-XP ............. 348
20-524 ................ 69, 95, 312, 314
20-524-122 ............ 69, 312
20-524-122-XP......... 312
20-524-XP............. 69, 95, 312, 314
20-524-XP-122......... 69
20-526 ................ 347
20-526-XP............. 347
20-527................. 347
20-527-XP ............. 347
20-528 ................ 83, 314, 342
20-528-XP............. 83, 314, 342
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
433
Price Book 6
Effective July 9, 2018
20-529 ................ 125, 322
20-529-XP............. 125, 322
20-530 ................ 322
20-530-XP............. 322
20-531 ................. 322
20-531-XP ............. 322
20-539 ................ 342, 347
20-539-XP............. 347
20-542 ................ 150, 327
20-542-XP............. 150, 327
20-543 ................ 150, 327
20-543-XP............. 150, 327
20-544 ................ 150, 327
20-544-XP............. 150, 327
20-545 ................ 137, 150, 320, 327
20-545-XP............. 137, 150, 320, 327
20-546 ................ 137, 150, 320, 327
20-546-XP............. 137, 150, 320, 327
20-547................. 348
20-547-XP ............. 348
20-548 ................ 95, 314
20-548-XP ............ 95, 314
20-550 ................ 313, 315, 342
20-550-XP............. 313, 315, 342
20-552................. 254, 274, 316
20-552-XP............. 254, 274, 316
20-554 ................ 313
20-554-XP............. 313
20-562 ................ 347
20-562-XP............. 347
20-565 ................ 113, 315
20-565-XP............. 113, 315
20-572................. 317
20-572-XP ............. 317
20-574................. 317
20-574-XP ............. 317
20-587................. 195, 219, 330
20-587-XP ............. 195, 219, 330
20-589 ................ 333
20-589-XP ............ 333
20-593 ................ 195, 219, 330
20-593-XP............. 195, 219, 330
20-700 ................ 195, 330
20-700-XP............. 195, 330
20-701 ................. 195, 330
20-701-XP ............. 195, 330
20-705................. 349
20-705-XP............. 349
20-706 ................ 331
20-706-XP............. 331
20-708 ................ 331
20-708-XP............. 331
20-709 ................ 343
20-709-XP............. 343
20-710 ................. 343
20-710-XP ............. 343
20-715 ................. 195, 330
20-715-XP.............. 195, 330
20-716 ................. 343
20-716-XP ............. 343
20-717.................. 195, 219, 330
20-717-XP .............. 195, 219, 330
20-718 ................. 331
20-718-XP ............. 331
20-719 ................. 347
20-719-XP ............. 347
20-720................. 347
20-720-XP ............. 347
20-722 ................. 336
20-722-XP ............. 336
20-723 ................. 348
20-723-XP ............. 348
20-724................. 69, 95, 312, 314
20-724-122............. 69, 312
20-724-122-XP ......... 312
20-724-XP ............. 69, 95, 312, 314
20-726................. 347
20-726-XP . . . . . . . . . . . . . 347
20-727 ................. 347
20-727-XP ............. 347
20-728................. 83, 314, 342
20-728-XP ............. 83, 314, 342
20-729................. 125, 322
20-729-XP . . . . . . . . . . . . . 125
20-730................. 322
20-730-XP ............. 322
20-731 ................. 322
20-731-XP.............. 322
20-739................. 342, 347
20-739-XP . . . . . . . . . . . . . 347
20-740................. 270, 345
20-740-XP ............. 345
20-741 ................. 345
20-741-XP.............. 345
20-742................. 150, 326
20-742-XP ............. 150, 326
20-743 ................. 150, 326
20-743-XP ............. 150, 326
20-744................. 150, 326
20-744-XP ............. 150, 326
20-745................. 137, 150, 320, 326
20-745-XP ............. 137, 150, 320, 326
20-746................. 137, 150, 320, 326
20-746-XP ............. 137, 150, 320, 326
20-747 ................. 348
20-747-XP ............. 348
20-748................. 95, 314
20-748-XP ............. 95, 314
20-750................. 313, 315, 342
20-750-XP............. 313, 315, 342
20-752 ................. 254, 270, 274, 316
20-752-XP ............. 254, 274, 316
20-757 ................. 344
20-757-XP ............. 344
20-762................. 347
20-762-XP ............. 347
20-763................. 335
20-763-XP . . . . . . . . . . . . . 335
20-765................. 113, 315
20-765-XP ............. 113, 315
20-766................. 336
20-766-XP............. 336
20-771 ................. 335
20-771-XP.............. 335
20-772 ................. 317
20-772-XP ............. 317
20-774 ................. 317
20-774-XP ............. 317
20-776 ................. 335
20-776-XP ............. 335
20-782................. 335
20-782-XP ............. 335
20-783................. 335
20-783-XP . . . . . . . . . . . . . 335
20-787 ................. 195, 219, 330
20-787-XP ............. 195, 219, 330
20-789................. 333
20-789-XP............. 333
20-793................. 195, 219, 330
20-793-XP ............. 195, 219, 330
20-798................. 335
20-798-XP............. 335
20-854 ................ 313
20-854-XP ............ 313
21-000................. 113
21-002................. 69, 95, 312, 314
21-002-122............. 69, 312
21-003................. 69, 312
21-003-098............ 314
21-003-168 ............ 69, 312
21-020................. 83, 314, 342
21-021.................. 83, 314
21-059 ................. 254, 274, 316
22-001 ................. 125, 322
22-002 ................ 125, 322
22-003 ................ 137, 320
22-004 ................ 137, 320
22-017 ................. 322
22-018 . . . . . . . . . . . . . . . . . 322
22-019 . . . . . . . . . . . . . . . . . 322
22-020 ................ 322
22-061 . . . . . . . . . . . . . . . . . 323
22-062................. 323
22-069 ................ 320
22-081 . . . . . . . . . . . . . . . . . 254, 322
22-082................. 322
22-085 ................ 150, 326
22-086 ................ 150, 326
22-093................. 230, 322
22-642................. 150, 326
22-643................. 150, 326
22-644 ................ 150, 326
22-645................. 137, 320
22-646 ................ 137, 320
23-000 ................ 315
23-001................. 95, 314
23-003 ................ 95, 314
23-003-098 ........... 95
23-013 ................. 313, 315, 342
23-014 ................. 315
23-030 ................ 345
23-030-ICX ............ 381
23-031 ................. 345
23-065 ................ 113, 315
23-118.................. 313
24-022................. 347
24-031 ................. 342
24-032................. 342
24-033................. 342
24-034 ................ 342
24-035 ................ 342
24-119.................. 347
24-120 ................. 347
24-123 ................. 348
24-126 ................. 347
24-127 ................. 347
24-139 ................. 342, 347
24-147 ................. 348
24-561 ................. 342
24-561-XP ............. 342
24-562................. 342
24-562-XP ............. 342
24-563................. 342
24-563-XP............. 342
24-564 ................ 342
24-564-XP............. 342
24-565................. 342
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
434
Price Book 6
Effective July 9, 2018
24-565-XP............. 342
24-567................. 333
24-567-XP ............. 333
24-569 ................ 254, 322
24-569-XP............. 254, 322
24-570................. 322
24-570-XP ............. 322
24-761 ................. 342
24-761-XP.............. 342
24-762 ................. 342
24-762-XP ............. 342
24-763 ................. 342
24-763-XP ............. 342
24-764................. 342
24-764-XP . . . . . . . . . . . . . 342
24-765................. 342
24-765-XP ............. 342
24-767 ................. 333
24-767-XP ............. 333
24-769 ................. 254, 322
24-769-XP ............. 254, 322
24-770 ................. 322
24-770-XP ............. 322
26-021 ................. 195, 330, 339
26-023 ................ 333, 339
26-064 ................ 335
26-072................. 331
26-073................. 331
26-091................. 335
26-094 ................ 335
26-098 ................ 336
30-001................. 195, 219, 330, 339
30-002 ................ 195, 330, 339
30-004 . . . . . . . . . . . . . . . . 333, 339
30-005 ................ 333, 339
30-007 ................ 335
30-008 ................ 335
30-010................. 335
30-016................. 335
30-021................. 195, 219, 330, 339
30-022 ................ 195, 330, 339
30-030 ................ 335
30-032 ................ 335
30-120 ................. 345
30-121.................. 345
30-137 ................. 335
30-138 . . . . . . . . . . . . . . . . . 335
30-140................. 335
33-005 ................ 358
33-007................. 347, 348, 358
33-058 ................ 358
33-059 ................ 358
33-059-149 ............ 358
33-060 ................ 347, 358
33-065 ................ 358
33-080 ................ 347, 358
33-081 ................. 347, 358
33-119.................. 312, 314, 315, 316, 317,
326, 342, 347, 358
33-133 ................. 358
33-134 ................. 313
33-136 ................. 312, 313, 314, 315, 316,
317, 326, 342, 347, 358
33-137.................. 312, 313, 314, 315, 316,
317, 342, 347, 352, 358
33-138 ................. 312, 313, 314, 315, 316,
317, 342, 347, 352, 358
33-139 ................. 358
33-154 ................. 312, 313, 314, 315, 316,
317, 327, 342, 347, 358
33-160 . . . . . . . . . . . . . . . . . 358
33-162 ................. 347, 348, 358
33-163 ................. 347, 348, 358
33-167 ................. 326, 358
33-186 ................. 326, 358
33-213 ................. 312, 313, 314, 315, 316,
317, 326, 347, 358, 359
33-214 ................. 312, 313, 314, 315, 316,
317, 326, 347, 358, 359
33-216 ................. 312, 314, 315, 358
33-219 ................. 347, 348
33-221 ................. 312, 313, 314, 315, 316,
317, 327, 342, 347, 358
33-222 . . . . . . . . . . . . . . . . . 347, 358
33-223 ................. 347, 358
33-224 ................. 347, 348, 358
33-225 ................. 347, 348, 358
33-231 ................. 347, 348, 358
33-232 ................. 347, 358
33-233 ................. 352, 358
33-234................. 352, 358
33-235 ................. 312, 314, 315, 358
33-236................. 358
33-616 ................. 352, 358
33-806 ................ 352, 358
34-001................. 354
34-002 ................ 354
34-003 ................ 354
34-004 ................ 354
34-005 ................ 354
34-006 ................ 354
34-007 ................ 354
34-058 ................ 354
34-101 ................. 354
34-102 ................. 354
34-103 ................. 354
34-202................. 354
34-203................. 354
34-204 ................ 354
34-205................. 354
34-206 ................ 354
34-207................. 354
34-208 ................ 354
34-209 ................ 354
34-300 ................ 354
34-301 ................. 354
34-302................. 354
34-303................. 354
34-304 ................ 354
34-305................. 354
34-306 ................ 354
34-307................. 354
34-308 ................ 354
34-309 ................ 354
34-401................. 354, 423
34-800 ................ 355
34-801................. 355
34-802 ................ 355
34-803 ................ 355
34-804 ................ 355
34-805 ................ 355
34-806 ................ 355
34-807................. 355
34-808 ................ 355
34-809 ................ 355
34-902 ................ 355
34-903 ................ 355
34-904 ................ 355
34-905 ................ 355
34-906 ................ 355
34-907................. 355
34-908 ................ 355
34-909 ................ 355
34-910................. 355
34-911.................. 355
34-912 ................. 355
34-913 ................. 355
34-914 ................. 355
34-915 ................. 355
34-916 ................. 355
34-917 ................. 355
34-918 ................. 355
34-919 ................. 355
34-950 ................ 355
34-952................. 355
35-002 ................ 366
35-003 ................ 366
35-004 ................ 372
35-004-XP ............ 373
35-005 ................ 372
35-005-XP............. 373
35-006 ................ 372
35-006-XP ............ 373
35-007................. 366
35-008 ................ 377
35-009 ................ 366
35-012 ................. 372
35-012-XP ............. 373
35-013 ................. 372
35-013-XP ............. 373
35-015 . . . . . . . . . . . . . . . . . 366
35-016 ................. 366
35-019 ................. 372
35-019-XP ............. 373
35-021 ................. 367
35-039 ................ 377
35-052................. 370
35-052-XP............. 371
35-053................. 370
35-053-XP ............. 371
35-056 ................ 364
35-057................. 377
35-076................. 364
35-077 ................. 364
35-079................. 364
35-097................. 377
35-100................. 364
35-101.................. 364
35-102 ................. 364
35-104 ................. 377
35-110.................. 377
35-111 .................. 377
35-115.................. 370
35-115-XP .............. 371
35-116.................. 370
35-116-XP .............. 371
35-130 ................. 364
35-131.................. 364
35-135-C ............... 385
35-138 ................. 374
35-138-XP ............. 375
35-140 . . . . . . . . . . . . . . . . . 364
35-141.................. 364
35-143 ................. 364
35-144 ................. 364
35-157 ................. 370
35-157-XP.............. 371
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
435
Price Book 6
Effective July 9, 2018
35-158 ................. 370
35-158-XP ............. 371
35-159 ................. 370
35-159-XP ............. 371
35-171 . . . . . . . . . . . . . . . . . . 370
35-172-XP .............. 370, 371
35-199 ................. 374
35-199-XP ............. 375
35-215 ................. 374
35-215-XP.............. 375
35-216 ................. 374
35-216-XP ............. 375
35-218 ................. 374
35-218-XP ............. 375
35-223 ................. 378
35-224................. 378
35-227 ................. 378
35-228................. 378
35-229................. 378
35-231 ................. 377
35-250................. 377
35-251 ................. 377
35-264................. 369
35-267 ................. 368
35-268................. 368
35-269................. 368
35-270................. 368
35-271.................. 368
35-272 ................. 368
35-273 ................. 374
35-273-XP ............. 375
35-289................. 377
35-310 ................. 367
35-400 ................ 369
35-401 ................. 367
35-421-XP ............. 376
35-422-XP ............. 376
35-423-XP ............. 376
35-424-XP ............. 376
36-056 ................ 252
36-066 ................ 324, 344
36-067................. 324
36-068 ................ 324
36-069 ................ 324
36-070 ................ 324
36-071 ................. 324
36-072................. 324
36-079 ................ 340
36-080 ................ 191
36-082 ................ 340
36-083 ................ 340
36-085 ................ 324
36-086 ................ 321, 323, 324
37-001 ................. 67, 81, 93, 115
37-015 ................. 185
37-016 ................. 134, 135, 146, 147, 229
38-016................. 123
38-017 ................. 123
38-018................. 68, 94, 273
38-031 ................. 123, 135
38-032 ................ 123
38-033 ................ 349
38-034 ................ 134, 147
38-070 ................ 334
38-090 ................ 193
38-091................. 193
38-092 ................ 193
38-093 ................ 193
38-094 ................ 193
38-095 ................ 193
39-029 ................ 430
39-030 ................ 65, 80, 92, 112, 123,
134, 146, 252, 253, 272
39-034 ................ 193
39-042 ................ 191, 430
39-234................. 193
40-015................. 422
40-017 ................. 422
40-026 ................ 422
40-029 ................ 422
40-030 . . . . . . . . . . . . . . . . 422
40-031................. 422
40-032 ................ 422
40-035 ................ 422
40-049 ................ 422
40-054 ................ 423
40-060................ 372, 374
40-060-XP ............ 373, 375
40-061................. 370
40-061-XP............. 371
40-062 ................ 370
40-062-XP ............ 371
40-065 ................ 370
40-065-XP ............ 371
40-066 ................ 419
40-070 ................ 418
40-071 ................. 420
40-074 ................ 419
40-075 ................ 419
40-097 ................ 423
40-099 ................ 419
40-104................. 419
40-112 ................. 422
40-119 ................. 418
40-128 ................. 420
40-129 ................. 420
40-132 ................. 418
40-133 ................. 418
40-134 ................. 418
40-147 ................. 424
40-148................. 424
40-152 ................. 422
40-153 . . . . . . . . . . . . . . . . . 422
40-158................. 422
40-160................. 425
40-161 ................. 425
40-162 ................. 425
40-163 ................. 425
40-164................. 425
40-165................. 425
40-166................. 425
40-167 ................. 425
40-168................. 425
40-169................. 425
40-170 ................. 425
40-171.................. 420
40-172 ................. 420
40-173 ................. 420
40-175 ................. 422
40-176 ................. 422
40-177 ................. 422
40-179 ................. 422
40-181 ................. 420
40-223................. 423
40-224 ................ 430
40-225................. 368
40-226 ................ 422
40-227................. 422
40-228 ................ 422
40-247................. 420
40-286 ................ 422
40-296 ................ 420
40-400................ 111
40-600................ 111
41-005................. 65
43-005 ................ 80, 92, 112
44-104................. 429
44-105................. 429
44-106................. 429
44-107 ................. 429
44-108................. 429
44-109................. 429
44-110 ................. 429
44-111 .................. 429
44-112.................. 429
44-113.................. 429
44-115.................. 429
44-119 ................. 429
44-120 ................. 429
44-121.................. 429
44-161 ................. 429
44-162 ................. 429
44-165 ................. 429
44-166................. 429
47-413 ................. 317
47-414 ................. 317
47-542................. 317
47-542-XP ............. 317
47-543 ................. 317
47-743 ................. 317
47-743-XP ............. 317
47-744 ................. 317
47-744-XP ............. 317
48-002 ................ 366
48-003 ................ 366
48-004 ................ 372
48-004-XP ............ 373
48-005 ................ 372
48-005-XP ............ 373
48-006 ................ 372
48-006-XP ............ 373
48-007 ................ 366
48-008 ................ 377
48-009 ................ 366
48-012................. 372
48-012-XP ............. 373
48-013................. 366
48-014................. 374
48-014-XP ............. 375
48-015................. 366
48-016................. 366
48-019................. 372
48-019-XP ............. 373
48-020 ................ 372
48-020-XP ............ 373
48-021................. 367
48-034 ................ 368
48-039 ................ 377
48-052 ................ 370
48-052-XP............. 371
48-053 ................ 370
48-053-XP............. 371
48-056 ................ 365
48-056-ICX............ 381
48-076 ................ 365
48-077................. 365
48-079 ................ 365
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
436
Price Book 6
Effective July 9, 2018
48-097 ................ 377
48-100................. 365, 384
48-101 ................. 365
48-101-ICX ............. 381
48-102................. 365
48-104................. 377
48-113.................. 377
48-114 ................. 377
48-115.................. 370
48-115-XP.............. 371
48-116 ................. 370
48-116-XP.............. 371
48-130................. 365
48-131.................. 365
48-140................. 365
48-141 ................. 365
48-143 ................. 365
48-144................. 365
48-157 ................. 370
48-157-XP.............. 371
48-158 ................. 370
48-158-XP ............. 371
48-159 ................. 370
48-159-XP ............. 371
48-171.................. 370
48-171-XP .............. 371
48-172 ................. 370
48-172-XP.............. 371
48-199................. 374
48-199-XP . . . . . . . . . . . . . 375
48-215 ................. 374
48-215-XP ............. 375
48-216 ................. 374
48-216-XP ............. 375
48-218 ................. 374
48-218-XP ............. 375
48-223................. 378
48-224................. 378
48-227................. 378
48-228 ................ 378
48-229................. 378
48-264 ................ 369
48-267................. 368
48-268 ................ 368
48-269 ................ 368
48-270................. 368
48-271 ................. 368
48-272................. 368
48-273................. 374
48-273-XP ............. 375
48-289 ................ 377
48-310 ................. 382
48-311.................. 382
48-400 ................ 369
48-401................. 367
48-421-XP ............. 376
48-422-XP............. 376
48-423-XP............. 376
48-424-XP............. 376
49-000................ 369
49-002 ................ 366
49-003 ................ 366
49-004 ................ 372
49-004-XP ............ 373
49-005 ................ 372
49-005-XP ............ 373
49-007 ................ 366
49-009 ................ 366
49-012................. 372
49-012-XP ............. 373
49-015................. 366
49-016................. 366
49-020 ................ 372
49-020-XP ............ 373
49-021................. 367
49-022 ................ 367
49-023 ................ 374
49-023-XP............. 375
49-052 ................ 370
49-052-XP............. 371
49-053 ................ 370
49-053-XP............. 371
49-056 ................ 365
49-076 ................ 365
49-077................. 365
49-079 ................ 365
49-100................. 365, 384
49-101 ................. 365
49-102 ................. 365
49-115.................. 370
49-115-XP.............. 371
49-116 ................. 370
49-116-XP.............. 371
49-130 ................. 365
49-131.................. 365
49-140................. 365
49-141 ................. 365
49-143 ................. 365
49-144 ................. 365
49-157 ................. 370
49-157-XP.............. 371
49-158 ................. 370
49-158-XP ............. 371
49-171.................. 370
49-171-XP . . . . . . . . . . . . . . 371
49-172 ................. 370
49-172-XP.............. 371
49-199................. 374
49-199-XP ............. 375
49-215 ................. 374
49-215-XP ............. 375
49-223................. 378
49-224................. 378
49-227 ................. 378
49-228................. 378
49-229................. 378
49-264 ................ 369
49-267................. 368
49-268 ................ 368
49-269 ................ 368
49-270................. 368
49-271 ................. 368
49-272 ................. 368
49-273 ................. 374
49-273-XP ............. 375
49-355................. 369
49-356 ................ 367
49-400 ................ 369
49-401................. 367
49-421-XP ............. 376
49-422-XP............. 376
49-423-XP............. 376
49-424-XP............. 376
50-001................. 383
50-002 ................ 380
50-003 ................ 379
50-120 ................. 386
50-121.................. 386
50-122 ................. 386
50-123 ................. 386
50-210 ................. 383
50-211.................. 383
50-214 . . . . . . . . . . . . . . . . . 387
50-215 ................. 387
50-216 ................. 380
50-217 ................. 379
50-219 ................. 379
50-220 ................ 379
50-221 ................. 379
50-223................. 384
50-224................. 384
50-227................. 387
50-228 ................ 387
50-229................. 379
50-230 ................ 385
50-231 ................. 381, 382
50-232................. 387
50-233................. 379
50-600 ................ 386
50-700 ................ 386
51-021.................. 79
51-022 ................. 79
51-023 ................. 79
51-024 ................. 79
51-025 . . . . . . . . . . . . . . . . . 79
51-026 ................. 79
51-037 ................. 81
51-038 ................. 81
51-039 ................. 81
51-040................. 81
51-041 ................. 81
60-000................ 387
60-001 ................ 387
61-500................. 137
61-501 ................. 137
61-502 ................. 137
61-503 ................. 137
61-504................. 137
61-505................. 137
61-506................. 137
61-507 ................. 137
61-509................. 135, 377
61-510 ................. 135, 377
68-001................. 252
68-001 xxx............. 272
68-002 xxx ............ 272
68-003 ................ 252, 272
68-004 ................ 252, 272
68-011 xxx ............. 272
68-012 xxx............. 272
68-013 xxx ............. 272
80-033 ................ 346
80-035 ................ 382
80-036 ................ 346
80-037 ................ 346
80-043 ................ 346
80-101 ................. 337
80-102................. 337
80-103................. 338
80-104................. 337
80-105................. 338
80-108................. 337
80-109................. 337
80-110 ................. 337
80-111 .................. 338
80-112 ................. 337
80-113 ................. 338
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
437
Price Book 6
Effective July 9, 2018
80-115 ................. 337
80-116 ................. 344
80-129 ................. 344
80-131 ................. 337
80-132 ................. 337
80-133 . . . . . . . . . . . . . . . . . 338
80-134 ................. 337
80-135 ................. 338
80-138................. 337
80-159................. 344
80-301................. 337
80-302 ................ 337
80-303 ................ 338
80-304 ................ 337
80-305 ................ 338
80-308 ................ 337
80-329 ................ 344
90-200 ................ 356
90-200-2 .............. 356
90-200-2-4............ 356
90-200-2-4-6 ......... 356
90-200-2-4-6-8 . . . . . . . 356
90-200-2-4-8 ......... 356
90-200-2-6............ 356
90-200-2-6-8 ......... 356
90-200-2-8............ 356
90-200-4.............. 356
90-200-4-6 ........... 356
90-200-4-8 ........... 356
90-200-6.............. 356
90-200-6-8 ........... 356
90-200-8.............. 356
90-201................. 356
90-201-3............... 356
90-201-3-5 ............ 356
90-201-3-5-7........... 356
90-201-3-5-7-9 ........ 356
90-201-3-5-9 .......... 356
90-201-3-7............. 356
90-201-3-9 ............ 356
90-201-5............... 356
90-201-5-7............. 356
90-201-5-7-9 .......... 356
90-201-5-9 ............ 356
90-201-7 ............... 356
90-201-7-9............. 356
90-201-9 .............. 356
90-202 ................ 356
90-202-4 .............. 356
90-202-4-6............ 356
90-202-4-6-8 ......... 356
90-202-4-8............ 356
90-202-6 . . . . . . . . . . . . . . 356
90-202-6-8............ 356
90-202-8 . . . . . . . . . . . . . . 356
90-203 ................ 356
90-203-5 .............. 356
90-203-5-7 ............ 356
90-203-5-7-9 .......... 356
90-203-5-9............ 356
90-203-7 .............. 356
90-203-7-9 ............ 356
90-203-9 .............. 356
90-204 ................ 356
90-204-6.............. 356
90-204-6-8 ........... 356
90-204-8.............. 356
90-205 ................ 356
90-205-7 .............. 356
90-205-7-9 ............ 356
90-205-9 .............. 356
90-206 ................ 356
90-206-8.............. 356
90-207 ................ 356
90-207-9 .............. 356
90-208 ................ 356
90-209 ................ 356
91-001 ................. 317
91-002................. 317
91-004................. 69, 95, 312, 314
91-005................. 69, 312
91-006................. 83, 314
91-007 ................. 254, 274, 316
91-008................. 125
91-009................. 320
91-010 ................. 320
91-011 .................. 320
91-014 ................. 320
91-015 ................. 320
91-016 ................. 95, 314
91-017.................. 313, 315
91-018 ................. 113, 315
91-019 ................. 313
91-020................. 347
91-027 ................. 347
91-028................. 150, 326
91-029................. 150, 326
91-030................. 150, 326
91-031 ................. 150, 326
91-032 ................. 150, 326
91-042................. 347
91-043................. 347
91-044................. 348
91-045................. 347
91-046................. 348
91-051 ................. 195, 330
91-059................. 195
91-060................. 332
91-061 ................. 332
91-062................. 195, 330
91-074 ................. 343
91-075 ................. 343
91-194 ................. 310
91-195 ................. 310
91-196 ................. 310
91-197.................. 310
91-198 ................. 310
91-199 ................. 310
91-200................. 308
91-451 ................. 309
91-453 ................. 309
91-500................. 308
91-504-XP . . . . . . . . . . . . . 69
91-505-XP ............. 69
91-551.................. 309
91-552 ................. 309
91-553 ................. 309
91-700 ................. 308
91-701-XP .............. 320
91-702-XP ............. 320
91-703-XP ............. 320
91-704-XP ............. 69, 95, 312, 314
91-705-XP ............. 69, 312
91-706-XP ............. 83, 314
91-707-XP.............. 125
91-708-XP ............. 347
91-709-XP ............. 150, 326
91-710-XP .............. 150, 326
91-711-XP............... 150, 326
91-712-XP .............. 150, 320, 326
91-713-XP .............. 150, 320, 326
91-714-XP .............. 95, 314
91-715-XP .............. 313, 315
91-718-XP .............. 113, 315
91-719-XP .............. 317
91-720-XP ............. 317, 347
91-721-XP .............. 313
91-722-XP.............. 254, 274
91-729-XP.............. 254
91-742-XP.............. 347
91-743-XP.............. 347
91-744-XP ............. 348
91-745-XP.............. 347
91-746-XP ............. 348
91-751-XP .............. 195, 330
91-757-XP .............. 195, 330
91-758-XP ............. 332
91-759-XP.............. 195, 332
91-772-XP .............. 316
91-774-XP.............. 343
91-775-XP.............. 343
021415 ................. 422
030730-001 ........... 342
030730-002 ........... 342
800108-03 ............ 286
800108-04 ............ 286
800108-06 ............ 286
800108-13 ............. 286
800108-25............. 286
800108-26 ............ 286
800109-25............. 286
800109-26 ............ 286
800110-03 ............. 286
800110-04............. 286
800110-06............. 286
800110-13.............. 286
800110-25 ............. 286
800110-26 ............. 286
800111-06 ............. 286
800111-26.............. 286
820406................ 301
821014-00 ............. 286
821015-00 ............. 286
823148-00............. 286
823150-00............. 286
829632-26............. 286
840088-00 ........... 286
840613-00 ............ 286
840956-04............ 285
840956-25 ............ 285
840956-26 ............ 285
840956-32 ............ 285
840957-04 ............ 285
840957-25............. 285
840957-26............. 285
840957-32............. 285
840960-04............ 286
840960-06............ 286
840960-13............. 286
840960-26 ............ 286
840960-32 ............ 286
840964-03 ............ 285
840964-04............ 285
840964-13............. 285
840964-25 ............ 285
840964-26 ............ 285
840965-31............. 285
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
438
Price Book 6
Effective July 9, 2018
840965-32 ............ 285
840967-64 ............ 285
850410 ................ 300
855101 . . . . . . . . . . . . . . . . . 299
855118 ................. 299
855125................. 299
855156................. 300
890022-03 ............ 285
890022-04 ............ 285
890022-06 . . . . . . . . . . . . 285
890022-13 ............. 285
890022-32 ............ 285
890023-03 ............ 285
890023-04 ............ 285
890023-06 ............ 285
890023-13 ............. 285
890023-32 ............ 285
994800 ............... 301
994848................ 299
994862................ 301
999140 ................ 294
999157................. 294
999201 ................ 301
999218 ................ 301
999225 ................ 301
999232 ................ 300
999249 ................ 301
999256 ................ 301
999263 ................ 301
999270 ................ 301
999461 ................ 291, 301
999478 ................ 291, 301
23446339.............. 345
23446347.............. 346
23538077 .............. 318
23538085 ............. 313, 318
24002693 ............. 422
24085037 ............. 114
24085060............. 114
24088544 ............. 114
24088551.............. 114
24302960 ............. 218
24341471 ............... 422
24353625.............. 193
24358830 ............. 193
24457715............... 193
24457723 .............. 193
24483760 ............. 115
24511081 ............... 218
24616914 .............. 217
24616922 .............. 218
24616930.............. 218
24624892 ............. 218
24625642 ............. 218
24625667.............. 218
24625717............... 218
24641714............... 218
24647265.............. 217
24647307 605 ......... 214
24647315 606.......... 214
24647323 609 ......... 214
24647356 619.......... 214
24647364 625 ......... 214
24647372 626.......... 214
24647380 629 . . . . . . . . . 214
24647398 316.......... 214
24653917 .............. 218
24653925.............. 218
24664997 ............. 217
24665002 ............. 217
24683542 ............. 218
24691750 .............. 217
24691768 .............. 217
24691776 .............. 217
24691784 .............. 217
24721714 ............... 217
24721722 ............... 217
24750408 ............. 217
24756504.............. 217
24759599.............. 217
24759623 .............. 217
24759656.............. 217
24759664.............. 217
24792558.............. 217
24865057 ............. 218
24869893 ............. 218
24869901.............. 218
46929456 ............. 346
47244699 630 ......... 214
48968887 ............. 217
49001704.............. 218
840964725 ............ 285
A
A100-045.............. 347, 360
A100-046.............. 347, 360
A100-047 .............. 347, 360
A100-048.............. 347, 360
A100-049.............. 347, 360
A100-050.............. 347, 348, 360
A100-051 .............. 352, 360
A100-052.............. 347
A100-053.............. 82
A100-054.............. 82
A201-330 .............. 68
A201-370 .............. 68, 82
A201-377............... 68
A201-399 .............. 68
A201-406.............. 68
A201-558 .............. 65
A201-683 .............. 347, 348
A201-684 .............. 68
A201-688.............. 68
A201-690.............. 347, 360
A201-691............... 360
A201-811 ............... 69
A201-812............... 69
A201-814............... 69
A201-848.............. 360
A201-849 .............. 347, 348
A201-934 .............. 318
A301-043 .............. 348
A301-337............... 312, 314, 318
A301-338 .............. 312, 318, 342, 347, 348
A301-339 .............. 312, 318
A301-386 .............. 68
A301-387 .............. 68
A301-391............... 68
A301-402 .............. 68, 82
A301-403 .............. 68
A301-404.............. 68
A301-405 .............. 68
A301-406.............. 68
A301-409.............. 68
A301-410 .............. 68
A500-00 .............. 68
A500-002 ............. 68
A501-161 ............... 69
A501-167 ............... 68, 82, 94
A501-171 ............... 83, 95, 115
A501-305 .............. 68, 82
A501-311 ............... 82
A501-498.............. 68
A501-499 .............. 68
A501-565 .............. 67, 81, 93, 115, 123, 135,
147
A501-566 .............. 67, 81, 93, 115, 123, 135,
147
A501-567 .............. 67, 81, 93, 115
A501-615............... 68, 82
A501-633 .............. 68
A501-693 .............. 312, 318
A501-710............... 68
A501-721 ............... 68, 82
A501-746 .............. 83, 95
A501-766 .............. 65
A501-767............... 68
A501-768 .............. 68
A501-769 .............. 69
A501-770 .............. 69
A501-783 .............. 348
A501-791 ............... 68, 82
A501-818 .............. 69
A501-874 .............. 68, 82
A501-878 .............. 67, 81, 93, 135, 273
A501-901 .............. 68, 82
A501-941 .............. 65
A501-945 .............. 230
A501-991 .............. 312, 318
A508-399 ............. 68
A508-597.............. 68, 82
A508-598 ............. 68
A508-600 . . . . . . . . . . . . . 68
A508-605 ............. 68
A508-606 ............. 318
A508-614.............. 318
A508-640 ............. 68
A508-641.............. 68
A508-649 ............. 69
A508-650 ............. 69
A508-652 ............. 342
A508-653 ............. 312, 313, 314, 315, 316,
317, 326, 347, 352, 359,
360
A508-655 ............. 312, 313, 314, 315, 316,
317, 326, 327, 342, 347,
359, 360
A508-660 ............. 312, 313, 314, 315, 316,
317, 326, 347, 348
A508-661.............. 312, 313, 314, 315, 316,
317, 326, 347
A508-662 ............. 347
A590-158 . . . . . . . . . . . . . . 68, 82
A590-159 .............. 68, 82
A590-180.............. 68, 82
A590-181............... 68, 82
A700-003 ............. 82
A700-004 ............. 82
A700-014 .............. 82
A700-015 .............. 82
A700-016.............. 82
A700-017 .............. 68, 82
A700-021 . . . . . . . . . . . . . . 79
A700-023.............. 314, 318
A700-028 ............. 81
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
439
Price Book 6
Effective July 9, 2018
A700-029 ............. 81
A700-030 ............. 81
A700-031 . . . . . . . . . . . . . . 314, 318, 342
A700-032.............. 83
A700-033.............. 81
A700-034 ............. 81
A700-036 ............. 82
A700-039 ............. 79
A700-041 .............. 79
A700-043 ............. 81
A700-044 ............. 79
A700-045 ............. 79
A700-046 ............. 82
A700-047.............. 79, 82
A700-048 ............. 81
A700-049 ............. 81
A700-050 ............. 81
A700-051 .............. 81
A700-052 ............. 79
A700-056 ............. 82
A700-057.............. 82
A710-001 .............. 82
A710-004.............. 82
A710-007 .............. 82
A710-008.............. 82
A710-020 .............. 82
B
B202-269.............. 324, 325
B202-328 .............. 344
B202-339 .............. 349
B202-369.............. 324, 325
B202-370 . . . . . . . . . . . . . . 324, 325, 329
B202-453.............. 324, 325, 329
B202-509.............. 125
B202-517............... 83, 95, 115, 125, 264
B202-557 .............. 324, 329
B202-558.............. 324, 325
B202-560.............. 125
B202-578 .............. 230
B202-580.............. 321, 324, 325
B202-671 .............. 123
B202-672 .............. 123
B202-824.............. 322
B202-825.............. 322
B202-957 .............. 321, 324
B220-001 .............. 344
B220-006 ............. 360
B220-032.............. 324, 329
B220-036.............. 324
B220-043.............. 125
B220-050 ............. 338
B220-117 ............... 360
B220-280.............. 360
B220-282 .............. 360
B220-284.............. 360
B250PD................ 121
B300-108.............. 321
B302-041 .............. 134
B302-043.............. 321
B302-045.............. 134
B502-191............... 333, 334, 341, 350
B502-200.............. 344
B502-209.............. 344
B502-292 .............. 334
B502-310-604 ......... 344
B502-380.............. 334
B502-468 ............. 334, 352
B502-486 ............. 349
B502-711 ............... 123
B502-815 .............. 123
B502-873 .............. 230
B502-899 ............. 344
B502-907.............. 341
B502-942.............. 334, 352
B502-943.............. 334
B502-944 ............. 334
B502-945.............. 334
B502-946 ............. 349
B502-948 ............. 333, 334, 341, 350
B502-949 ............. 324
B502-998 ............. 254
B502-999 ............. 324, 325
B520-086 ............. 124
B520-087.............. 124
B520-153 .............. 344
B520-223 . . . . . . . . . . . . . . 350
B520-233 .............. 350
B520-235 .............. 323
B520-236 .............. 324, 325
B520-237 .............. 324, 325
B520-240.............. 323, 329
B520-242 .............. 324, 325
B520-243 .............. 324, 325
B520-253 .............. 350
B520-254 .............. 334, 341
B520-256.............. 350
B520-267 .............. 124
B520-268.............. 124
B520-269.............. 124
B520-271............... 124
B520-295.............. 341
B520-296.............. 350
B520-298.............. 136, 322, 328
B520-309.............. 350
B520-329 .............. 350
B520-360.............. 350
B520-361 .............. 344
B520-366.............. 350
B520-367 .............. 350
B520-375 .............. 324
B520-378 . . . . . . . . . . . . . . 336, 338
B520-407.............. 348
B520-408 ............. 348
B520-409 ............. 348
B520-483.............. 338
B520-484 ............. 338
B520-541 .............. 321, 323, 324
B520-648 ............. 321
B520-649 ............. 135
B520-650 ............. 135
B520-651 .............. 321
B520-652.............. 321
B520-653.............. 321
B520-662.............. 136
B520-663.............. 136
B520-667.............. 321
B520-685.............. 323
B520-690 ............. 334, 359
B520-691 .............. 334, 359
B520-692.............. 334, 359
B520-693.............. 334, 359
B520-698 ............. 336, 341
B520-721............... 359
B520-722 .............. 359
B520-723 .............. 359
B520-724 .............. 359
B520-725 .............. 359
B520-726 .............. 359
B520-727 .............. 359
B520-728 . . . . . . . . . . . . . . 349
B520-729 .............. 349
B520-730 .............. 350
B520-731............... 350
B520-732 .............. 350
B520-733 .............. 350
B520-734 .............. 350
B520-735 .............. 350
B520-736 .............. 350
B520-737 .............. 350
B520-738 .............. 341
B520-739 .............. 341
B520-740 .............. 341
B520-741............... 341
B520-743 .............. 331, 334
B520-744 .............. 331, 334
B520-780.............. 351
B520-781 .............. 351
B520-782 .............. 351
B520-783 .............. 351
B520-784 .............. 351
B520-785 .............. 351
B520-786.............. 351
B520-787 .............. 351
B520-788.............. 332
B520-789 .............. 332
B530-254 .............. 350
B590-295.............. 334
B590-298.............. 359
B590-299.............. 359
B590-443.............. 324
B600-017 .............. 147
B600-018.............. 134, 147
B600-029 ............. 321, 323, 329
B600-032 ............. 323
B600-040 ............. 321
B600-041.............. 321, 323
B600-045 ............. 321
B600-046 ............. 321
B600-047 ............. 136
B600-048 ............. 136
B600-053 ............. 136
B600-066 ............. 136
B600-070 ............. 328
B600-071 .............. 321, 323
B600-078 ............. 136
B600-085 ............. 321
B600-086 ............. 321
B600-089 ............. 328, 329
B600-090 ............. 328
B600-092 ............. 321, 328
B600-100.............. 136
B600-101 .............. 136
B600-106.............. 321, 329
B600-107 .............. 321, 329, 344
B600-108.............. 321, 329
B610-014 .............. 321, 329
B610-024 .............. 328
B610-025 .............. 328
B610-028.............. 321, 329
B610-031 .............. 321, 329
B610-032 . . . . . . . . . . . . . . 321, 329
B610-035 .............. 147
B610-040.............. 321, 329
B610-041 .............. 321, 328, 329
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
440
Price Book 6
Effective July 9, 2018
B610-042 .............. 328
B610-043 .............. 328
B610-044.............. 328
B610-045.............. 328
B610-046.............. 328
B610-049.............. 148
B610-050.............. 148
B610-051 .............. 148
B610-053 .............. 148
B610-054.............. 148
B610-055 .............. 148
B610-056.............. 148
B610-059.............. 149
B610-061 .............. 149
B610-062.............. 149
B610-063 .............. 149
B610-064.............. 149
B610-065.............. 149
B610-066.............. 148, 149
B610-071............... 328
B610-082.............. 326, 327, 328
B610-083.............. 326, 327, 328
B610-084.............. 326, 327, 328
B610-085.............. 326, 327, 328
B610-086.............. 326, 327, 328
B610-203 .............. 321, 329
B610-204 .............. 321, 329
B610-205 .............. 321, 329
B610-281............... 321, 329
C
C100-059.............. 94
C100-062 .............. 94
C102-522............... 93
C102-524 .............. 93
C102-540 .............. 94
C102-541 ............... 93
C102-542 .............. 93
C102-570 .............. 93
C102-572............... 93
C102-837............... 94
C102-840 .............. 94
C203-034.............. 94
C203-311 ............... 69, 83, 95, 115, 125,
149, 254, 273
C203-312............... 69, 83, 95, 115, 125,
149, 273
C203-376 .............. 94
C203-390.............. 94
C203-391 .............. 94
C203-411 ............... 94
C203-726 .............. 352, 360
C203-733 .............. 94
C203-736 .............. 83, 95, 115, 194
C203-858.............. 94
C203-947 .............. 94
C203-948.............. 94
C303-006 ............. 94
C303-007.............. 95
C303-028.............. 95
C303-029.............. 83
C303-400 ............. 94
C303-421 .............. 83
C303-437 .............. 347, 348
C303-438.............. 83
C303-439.............. 94
C503-008 ............. 68, 94
C503-019 .............. 94, 114
C503-113 ............... 354
C503-115 ............... 345, 354
C503-116 ............... 354
C503-118............... 345, 354
C503-308.............. 82, 94
C503-314 .............. 94
C503-324 .............. 94
C503-331............... 114
C503-334 . . . . . . . . . . . . . . 94
C503-335 .............. 94
C503-339 .............. 94
C503-346.............. 352
C503-359 .............. 94
C503-360.............. 94
C503-361 .............. 94
C503-362 .............. 94
C503-368.............. 94
C503-371............... 94
C503-400 ............. 94
C503-403.............. 92
C503-524 .............. 318
C503-746 .............. 92
C503-767 .............. 312, 314, 315, 318
C503-768 .............. 94
C503-775 .............. 92
C503-940 ............. 92
C503-965.............. 94
C504-114............... 355
C504-116............... 355
C603-098 ............. 328
C603-195 .............. 318
C603-256.............. 69, 83, 95, 115, 124,
148, 273
C603-262.............. 92
C603-500 ............. 94
C603-524.............. 314, 318
C603-569.............. 92
C603-623.............. 123, 263
C603-827 .............. 345, 354
C603-897.............. 69, 83, 95, 115, 124,
136, 148, 254, 273
C603-936.............. 355
C603-950 ............. 354
C603-951 .............. 354
C603-952.............. 354
C603-956.............. 345
C603-964 ............. 345
C603-967.............. 345
C604-050 ............. 352
C604-051 .............. 352
C604-052 ............. 352
C604-053 ............. 352
C604-088 ............. 352
C604-089 ............. 352
C604-106 .............. 314, 318
C604-107 .............. 318
C604-144 .............. 318
C604-187 .............. 94, 114
C604-188 .............. 94, 114
C604-191............... 94, 114
C604-204 ............. 94
C604-205.............. 94
C604-226.............. 352
C604-234.............. 352
C604-243.............. 313, 315, 318, 342, 347,
348
C604-268 ............. 352
C604-269.............. 352
C604-271 .............. 352
C604-273 .............. 82, 94
C604-307.............. 65
C604-312 .............. 94
C604-333 .............. 92
C604-334.............. 336
C604-348.............. 315, 318
C604-354.............. 82
C604-362.............. 318
C604-368.............. 318
C604-369.............. 318
C604-371 .............. 318
C604-372 .............. 318
C604-381 .............. 79
C604-395.............. 83
C604-400 ............. 82
C604-402 ............. 79
C604-419 .............. 352
C607-062.............. 348
CL10-301 ............... 319, 416
CL10-350 .............. 416
CL10-352............... 416
CL10-354 .............. 416
CL10-355............... 416
CL10-360 .............. 317, 319, 416
CL10-361 ............... 319, 416
CL10-362 .............. 319, 416
CL100PB............... 412
CL154PB ............... 412
CL154PB-XP ........... 412
CL174PB ............... 412
CL174PB-XP............ 412
CL200PB .............. 412
CL254PB............... 412
CL254PB-XP ........... 412
CL274PB ............... 412
CL274PB-XP ........... 412
CL720-3-1 .............. 416
CL720-3-2 ............. 416
CL720-3-3 ............. 416
CL720-3-4 ............. 416
CL720-3-5 ............. 416
CL720G ................ 414
CL721G ................. 414
CL725-1 ................ 416
CL725G ................ 414
CL725-SP .............. 416
CL728G ................ 414
CL729G ................ 414
CL729S-2 .............. 416
CL729S-3 .............. 416
CL771G ................. 414
CL774R ................ 413
CL774R-XP............. 413
CL775G ................ 414
CL775-SP .............. 416
CL777R................. 413
CL874R ................ 413
CL874R-XP ............ 413
CL888R................ 413
CL920R ................ 413
CL929R . . . . . . . . . . . . . . . . 413
CL974R ................ 413
CL974R-XP ............ 413
CL7788-PA-D .......... 416
CL-ETS1................ 416
CLTR78 ................ 416
CON-6 ................. 116, 196, 220
CON-6P................ 116, 196, 220
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
441
Price Book 6
Effective July 9, 2018
CON-6W . . . . . . . . . . . . . . . 116, 196, 220
CON-12................. 116, 196, 220
CON-12P ............... 116, 196, 220
CON-26 ................ 116, 196, 220
CON-26P............... 116, 196, 220
CON-32 ................ 116, 196, 220
CON-32P............... 116, 196, 220
CON-38 ................ 116, 196, 220
CON-38P............... 116, 196, 220
CON-44................ 116, 196, 220
CON-44P .............. 116, 196, 220
CON-50................ 116, 196, 220
CON-50P .............. 116, 196, 220
CON-192 ............... 116, 196, 220
CON-192P .............. 116, 196, 220
CON-KIT ............... 116, 196, 220
CS210-B500 ........... 227
D
D500-000............. 79, 113
E
E205-204.............. 324, 325
F
F206-493.............. 230
F206-494.............. 230
F206-496.............. 230
F506-237 .............. 273
F506-278 . . . . . . . . . . . . . . 273
F506-359.............. 136
F506-455.............. 264
F506-864 ............. 230
F506-867.............. 254
F506-878.............. 230
F605-038 ............. 319
G
G506-815 .............. 67, 81, 93, 254, 273
G570-232 .............. 68
H
HANDLE.10155 ......... 283
HANDLE.10156 ......... 283
HANDLE.10157 ......... 283
HANDLE.10158 ......... 283
HANDLE.10159 ......... 283
HANDLE.10160 ......... 283
HANDLE.10161.......... 283
HANDLE.10162 ......... 283
HANDLE.10168 ......... 283
HANDLE.10170 ......... 283
HANDLE.10176 ......... 283
HANDLE.10178 ......... 283
HANDLE.10179 ......... 283
HANDLE.10180 ......... 283
HANDLE.10181.......... 283
HANDLE.10182 ......... 283
HANDLE.10183 ......... 283
HANDLE.10184 ......... 283
HANDLE.10185 ......... 283
HANDLE.10186 ......... 283
HANDLE.10192 ......... 283
HANDLE.10194 ......... 283
HANDLE.10200 ........ 283
HANDLE.10202......... 283
HANDLE.10203......... 284
HANDLE.10205 ........ 284
HANDLE.10206 ........ 284
HANDLE.10207......... 284
HANDLE.10208 ........ 284
HANDLE.10209 ........ 284
HANDLE.10211.......... 284
HANDLE.10212 ......... 284
HANDLE.10213 ......... 284
HANDLE.10215 ......... 283
HANDLE.10217 ......... 284
HANDLE.10218 ......... 284
HANDLE.10219 ......... 284
HANDLE.10220......... 284
HANDLE.10221 ......... 285
HANDLE.10222......... 285
HANDLE.10225......... 283
HANDLE.10226......... 285
HANDLE.10229......... 284
HANDLE.10230......... 285
HANDLE.10231 ......... 285
HANDLE.10236......... 285
HANDLE.10238......... 284
HANDLE.10243......... 285
HANDLE.10248......... 283
HANDLE.10254......... 284
HANDLE.10261 ......... 284
HANDLE.10262......... 284
HANDLE.10264 ........ 284
HANDLE.10266 ........ 284
HANDLE.10267......... 284
HANDLE.10268 ........ 284
HANDLE.10269......... 284
HANDLE.10270......... 284
HANDLE.10271 ......... 284
HANDLE.10272 . . . . . . . . . 284
HANDLE.10273 . . . . . . . . . 284
HANDLE.10275 ......... 283
HANDLE.10277 ......... 284
HANDLE.10278......... 284
HANDLE.10279......... 284
HANDLE.10280 ........ 284
HANDLE.10281 ......... 285
HANDLE.10282......... 285
HANDLE.10285......... 285
HANDLE.10286 ........ 285
HANDLE.10289 ........ 284
HANDLE.10290 ........ 285
HANDLE.10291 ......... 285
HANDLE.10296 ........ 284
HANDLE.10297......... 284
HANDLE.10298 ........ 285
HANDLE.10306 ........ 283
HANDLE.10308 ........ 283
HANDLE.10317 ......... 284
HANDLE.10318 ......... 284
HANDLE.10325......... 285
HANDLE.10326......... 285
HL6-2.................. 280
HL6-3.................. 280
HL6-5.................. 280
HL6-7 .................. 280
HL6-9000RK .......... 281
HL6-9010.............. 281
HL6-9040 ............. 281
HL6-9050 ............. 281
HL6-9060 ............. 281
HL6-9070 ............. 281
HL6-9080 ............. 281
HL6-9082 ............. 281
HL6-9092EL/EU....... 281
HL6-9095EL/EU....... 281
HL6-9453.............. 281
HL6-9456 ............. 281
HL6-9465 ............. 281
HL6-9466 ............. 281
HL6-9473.............. 281
HL6-9485 ............. 281
HL6-9486 ............. 281
HLPART.10158.......... 286
HLPART.10159.......... 286
J
J250-028 . . . . . . . . . . . . . . 136
K
K110-020 .............. 194
K110-020 xx............ 214
K110-480 316 .......... 359
K110-480 605.......... 359
K110-480 606.......... 359
K110-480 609.......... 359
K110-480 612 .......... 359
K110-480 613 .......... 359
K110-480 619 .......... 359
K110-480 625 .......... 359
K110-480 626.......... 359
K110-480 629.......... 359
K110-480 630.......... 359
K110-550............... 191
K110-947............... 194
K510-045 .............. 354
K510-053 .............. 185
K510-066.............. 66, 80, 93, 112, 123,
146, 185, 263, 272
K510-320 .............. 191
K510-330 .............. 186, 215
K510-389 .............. 188, 216
K510-390 . . . . . . . . . . . . . . 188, 216
K510-434 .............. 354
K510-474 .............. 336
K510-680.............. 335, 336, 337, 338, 341
K510-711................ 336, 338
K510-730 .............. 335, 336, 337, 338,
341, 350
K510-842 .............. 191
KC215A130 . . . . . . . . . . . . . 293
KC215B130 ............. 293
KC215E220............. 291
KS11D1200 ............. 293
KS11F1200 ............. 293
KS21D1200............. 293
KS21F1200 . . . . . . . . . . . . . 293
KS23D2200............ 290, 292
KS23D2300............ 291
KS23F2200 ............ 290, 292
KS23F2300 ............ 291
KS41D1200............. 293
KS41F1200 ............. 293
KS43D2200............ 290, 292
KS43D2300............ 291
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
442
Price Book 6
Effective July 9, 2018
KS43D3200............ 290, 294
KS43F2200 ............ 290, 292
KS43F2300 ............ 291
KS43F3200 ............ 290, 294
KS72F2300 ............ 291
KZ11A10 ................ 297
KZ11D10 ................ 297
KZ11D20 ............... 297
KZ11F10 ................ 297
KZ11F40................ 297
KZ11G10 ................ 297
KZ11G20 ............... 297
KZ11G40 ............... 297
KZ12D10 ............... 297
KZ12D20 ............... 297
KZ12D40............... 297
KZ12G10 ............... 297
KZ12G20 . . . . . . . . . . . . . . . 297
KZ12G40 ............... 297
KZ13D10 ............... 297
KZ13D20 ............... 297
KZ13D40............... 297
KZ13F10................ 297
KZ13F20 ............... 297
KZ13F40 ............... 297
KZ31CA1................ 298
KZ31CB1................ 296, 298
KZ31CC1................ 298
KZ31CD0............... 298
KZ31DA0............... 296
KZ32BB0 .............. 298, 319
KZ32CA1 ............... 298
KZ32CB1 ............... 296
KZ32DA0 .............. 296, 317, 319
KZ33DC0 .............. 319
KZ34CA0 .............. 319
KZ34DA0 .............. 298, 317, 319
KZ34ED0 .............. 319
KZ35AA1 ............... 298
KZ35AA2 .............. 298
KZ35AA3 .............. 298
KZ35AC1 ............... 298
KZ38BA1............... 298, 319
KZ38BA2 .............. 319
KZ200AL .............. 296
KZ390AL .............. 296, 423
KZ37000 .............. 298
L
L0170 . . . . . . . . . . . . . . . . . . 163, 165, 167, 169
L0172 .................. 163, 165, 167, 169
L283-003.............. 191
L283-004.............. 191
L283-006.............. 191
L283-008.............. 191
L283-010 .............. 191
L283-029 .............. 191
L283-030.............. 191, 218
L283-031 .............. 191, 218, 264
L283-039.............. 189
L283-040.............. 191, 218
L283-049.............. 191
L283-055 .............. 191, 218
L283-056 19 ........... 186, 215
L283-056 23........... 186, 215
L283-056 25........... 186, 215
L283-056 31 ........... 186, 215
L283-056 37 . . . . . . . . . . . 186, 215
L283-056 43........... 186, 215
L283-056 48........... 186, 215
L283-057 .............. 191
L283-060.............. 188, 216
L283-061 .............. 188, 216
L283-062.............. 189
L283-064.............. 188, 216
L283-065.............. 188, 216
L283-075 .............. 191
L283-099.............. 189
L283-100 .............. 194
L283-101 . . . . . . . . . . . . . . . 194
L283-112 ............... 191
L283-121 ............... 194
L283-122............... 194
L283-123............... 194
L283-124 19 ............ 186, 215
L283-124 23............ 186, 215
L283-124 25............ 186, 215
L283-124 31 ............ 186, 215
L283-124 37 ............ 186, 215
L283-124 43............ 186, 215
L283-124 48 ........... 186, 215
L283-126............... 189
L283-127 ............... 191
L283-128............... 191
L283-131 ............... 189
L283-132............... 189
L283-133............... 189
L283-134............... 189
L283-137 ............... 189
L283-138............... 189
L283-139............... 189
L283-140 .............. 189
L283-141 ............... 189
L283-144............... 189
L283-145............... 189
L283-146 .............. 189
L283-150 .............. 191, 218
L283-154 xx............ 194
L283-170............... 189
L283-171 ............... 189
L283-172 . . . . . . . . . . . . . . . 189
L283-173 . . . . . . . . . . . . . . . 189
L283-176............... 189
L283-177 ............... 189
L283-178............... 189
L283-180 .............. 189
L283-181 ............... 189
L283-182............... 189
L283-198 .............. 188, 216
L283-199 .............. 188, 216
L283-310............... 189
L283-311 ............... 189
L283-314............... 189
L283-316............... 189
L283-317 . . . . . . . . . . . . . . . 189
L283-340 .............. 264
L283-341............... 264
L283-344 .............. 218
L283-347 .............. 190
L283-378 .............. 264
L283-392 .............. 190
L283-393 .............. 190
L283-394 .............. 190
L283-395 .............. 190
L283-396 . . . . . . . . . . . . . . 190
L283-397 .............. 190
L283-398 . . . . . . . . . . . . . . 190
L283-412............... 182
L283-413............... 187
L283-414 .............. 187
L283-415............... 187
L283-416 .............. 187
L283-417............... 187
L283-418 .............. 187
L283-419 .............. 187
L283-420 .............. 187
L283-421............... 187
L283-422 .............. 187
L283-423 .............. 187
L283-424 .............. 187
L283-425 .............. 187
L283-426 .............. 187
L283-427 .............. 187
L283-428 .............. 187
L283-429 . . . . . . . . . . . . . . 187
L283-430 .............. 187
L283-431............... 187
L283-432 .............. 187
L283-433 .............. 187
L283-434 .............. 187
L283-435 .............. 187
L283-436 . . . . . . . . . . . . . . 187
L283-438 . . . . . . . . . . . . . . 187
L283-439 . . . . . . . . . . . . . . 187
L283-440.............. 187
L283-441 .............. 187
L283-442 . . . . . . . . . . . . . . 187
L283-443 .............. 187
L283-444.............. 187
L283-445 .............. 187
L283-446.............. 187
L283-447 .............. 187
L283-448.............. 187
L283-450.............. 182
L283-452 .............. 191
L283-467 .............. 190
L283-468.............. 190
L283-469.............. 190
L283-470 .............. 190
L283-471............... 190
L283-472 .............. 190
L283-473 .............. 190
L283-474 .............. 190
L283-475 .............. 190
L283-476 .............. 190
L283-479 .............. 190
L283-480.............. 190
L283-481 .............. 190
L283-482 .............. 190
L283-483 .............. 190
L283-484.............. 190
L283-680.............. 218
L283-725 .............. 189
L283-736 .............. 187
L460P ................. 171
L462P ................. 171
L463P ................. 171
L464P ................. 171
L480 .................. 171
L496P ................. 171
L583-004.............. 191
L583-015 .............. 191, 218
L583-019 .............. 218
L583-020.............. 191, 218
L583-021 .............. 191, 218
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
443
Price Book 6
Effective July 9, 2018
L583-022 .............. 191, 218
L583-023 .............. 191, 218
L583-024 .............. 191, 218
L583-025 .............. 191, 218
L583-026.............. 191
L583-027 .............. 191
L583-028.............. 191
L583-029.............. 191, 218
L583-030.............. 191
L583-031 .............. 191
L583-035 .............. 191
L583-038.............. 191
L583-043 .............. 191
L583-044.............. 191
L583-045.............. 191, 218
L583-047 .............. 191
L583-048.............. 191, 218
L583-049.............. 191
L583-050.............. 191, 218
L583-051 .............. 191
L583-053 .............. 191
L583-056.............. 191
L583-057 .............. 191
L583-058.............. 191
L583-063.............. 191
L583-064.............. 191
L583-065.............. 192
L583-066.............. 192, 218
L583-119 ............... 188, 216
L583-120............... 188, 216
L583-121 ............... 188, 216
L583-122............... 188, 216
L583-123............... 188, 216
L583-133............... 83, 115, 188, 216
L583-153............... 333, 334, 341
L583-156............... 192
L583-174 ............... 192
L583-187............... 183, 213
L583-192............... 192
L583-195............... 340
L583-196 .............. 192
L583-197............... 334
L583-198 .............. 334
L583-200.............. 336
L583-211 ............... 188, 216
L583-212............... 188, 216
L583-213............... 188, 216
L583-214............... 188, 216
L583-215............... 188, 216
L583-216............... 188, 216
L583-217 ............... 188, 216
L583-218............... 188, 216
L583-219............... 188, 216
L583-233 .............. 186, 215
L583-233-458 ......... 377
L583-245 .............. 188
L583-254 .............. 333, 334, 341
L583-255 .............. 335, 336, 337, 338, 341
L583-286 .............. 192
L583-287 .............. 188, 216
L583-290 .............. 192
L583-291............... 192
L583-321............... 192
L583-322 .............. 192
L583-363 .............. 186, 187, 215
L583-375 .............. 188
L583-426 .............. 192
L583-427 .............. 192
L583-446.............. 331, 334
L583-447 .............. 331, 334
L583-454 .............. 115, 192, 218
L583-468.............. 192
L583-474 .............. 330, 334, 341
L583-475 .............. 330, 334, 341
L583-476 .............. 330, 334, 341, 352
L583-477 .............. 330, 334, 341
L583-481 .............. 192
L583-485.............. 192, 218
L583-490.............. 192, 218
L583-492 .............. 192
L583-494.............. 192
L583-496.............. 192
L583-497 .............. 188, 216
L583-498.............. 188, 216
L583-499.............. 188, 216
L583-500.............. 188, 216
L583-501 .............. 188, 216
L583-502 .............. 188, 216
L583-503 .............. 188, 216
L583-504.............. 188, 216
L583-579 .............. 187
L583-584.............. 264
L583-585 .............. 194
L583-638 .............. 341
L583-639 .............. 341
L583-682 .............. 264
L583-684.............. 264
L583-685.............. 264
L583-705 .............. 187
L583-708 .............. 264
L583-709 .............. 187
L583-710............... 187
L583-711 ............... 187
L583-712 ............... 187
L583-717 ............... 187
L583-739 .............. 187
L583-748 .............. 191
L583-752 .............. 187
L583-757............... 187
L583-760 .............. 192
L583-761............... 192
L583-773............... 332
L583-774............... 332
L583-800.............. 330
L583-801 .............. 330
L583-802.............. 330, 351
L583-803.............. 330, 351
L9010.................. 163, 165, 167, 169
L9010B ................ 179
L9025 ................. 163, 165, 167, 169
L9026P................ 163, 165, 167, 169
L9040 ................. 163, 165, 167, 169
L9040B................ 179
L9044 ................. 163, 167
L9050LB .............. 179
L9050P................ 163, 165, 167, 169
L9056LB............... 179
L9056P................ 163, 165, 167, 169
L9060P................ 163, 165, 167, 169
L9070LB............... 179
L9070P ................ 163, 165, 167, 169
L9071P................. 163, 165, 167, 169
L9076P ................ 163, 165, 167, 169
L9077P ................ 163, 165, 167, 169
L9080LB .............. 179
L9080P................ 163, 165, 167, 169
L9082LB............... 179
L9082P................ 163, 165, 167, 169
L9090 . . . . . . . . . . . . . . . . . 163, 165, 167, 169
L9090LB .............. 179
L9091LB ............... 179
L9092P................ 163, 165, 167, 169
L9094P................ 163, 165, 167, 169
L9175 .................. 163, 165, 167, 169
L9176 .................. 163, 165, 167, 169
L9440 ................. 163, 165, 167, 169
L9444 ................. 163, 167
L9453LB............... 179
L9453P ................ 163, 165, 167, 169
L9456LB............... 179
L9456P ................ 163, 165, 167, 169
L9457P ................ 163, 165, 167, 169
L9458P ................ 163, 165, 167, 169
L9460P................ 171
L9462P ................ 171
L9463P ................ 171
L9464P................ 171
L9465LB............... 179
L9465P................ 163, 165, 167, 169
L9466P................ 163, 165, 167, 169
L9473LB ............... 179
L9473P ................ 163, 165, 167, 169
L9480LB .............. 179
L9480P................ 163, 165, 167, 169
L9485LB............... 179
L9485P................ 163, 165, 167, 169
L9486P................ 163, 167
L9492P ................ 163, 165, 167, 169
L9494P................ 163, 165, 167, 169
L9496P................ 163, 167
LM9210 . . . . . . . . . . . . . . . . 203, 205, 207, 209
LM9210F............... 203, 205, 207, 209
LM9210M .............. 203, 205, 207, 209
LM9225................ 203, 207
LM9225F .............. 203, 207
LM9225M .............. 203, 207
LM9250FP............. 203, 205, 207, 209
LM9250MP ............ 203, 205, 207, 209
LM9250P .............. 203, 205, 207, 209
LM9256FP ............. 203, 205, 207, 209
LM9256MP ............ 203, 205, 207, 209
LM9256P .............. 203, 205, 207, 209
LM9270FP ............. 203, 205, 207, 209
LM9270MP ............ 203, 205, 207, 209
LM9270P .............. 203, 205, 207, 209
LM9271 ................ 203
LM9271FP.............. 203, 205, 207, 209
LM9271MP ............. 203, 205, 207, 209
LM9271P ............... 205, 207, 209
LM9280FP............. 203, 205, 207, 209
LM9280MP ............ 203, 205, 207, 209
LM9280P .............. 203, 205, 207, 209
LM9290EL or EU ....... 203, 205, 207, 209
LM9290FEL or EU...... 203, 205, 207, 209
LM9290MEL or EU ..... 203, 205, 207, 209
LM9291EL or EU........ 203, 205, 207, 209
LM9291FEL or EU ...... 203, 205, 207, 209
LM9291MEL or EU...... 203, 205, 207, 209
LM9292ELP or EUP .... 203, 205, 207, 209
LM9292FELP or EUP ... 203, 205, 207, 209
LM9292MELP or EUP .. 203, 205, 207, 209
LM9293ELP or EUP .... 203, 205, 207, 209
LM9293EPL or EUP .... 203
LM9293FELP or EUP ... 203, 205, 207, 209
LM9293MELP or EUP .. 203, 205, 207, 209
LM9294MELP or EUP .. 203, 205, 207, 209
LM9295ELP or EUP .... 205, 207, 209
PARTS INDEX
INDEX
Part Number Page Number Part Number Page Number Part Number Page Number
444
Price Book 6
Effective July 9, 2018
LM9295FELP or EUP . . . 205, 207, 209
LM9295FEPL or EUP . . . 203
LM9295MELP or EUP .. 203, 205, 207, 209
LM9325................ 163, 167
LT10 ................... 258, 260
LT10F .................. 258, 260
LT40................... 258, 260
LT40F ................. 258, 260
LT170 .................. 258, 260
LT172................... 258, 260
LV9040B .............. 179
LV9050LB ............. 179
LV9056LB ............. 179
LV9070LB ............. 179
LV9080LB ............. 179
LV9082LB ............. 179
LV9453LB.............. 179
LV9456LB ............. 179
LV9480LB ............. 179
LV9485LB ............. 179
M
M204-152.............. 382
M204-168.............. 419
M204-198.............. 422
M204-200 ............. 419
M204-201.............. 419
M504-271 .............. 377, 422
M504-306 . . . . . . . . . . . . . 422
M504-347 ............. 422
M504-413.............. 422
M504-424 ............. 422
M504-425 ............. 422
M504-426 ............. 422
M504-427 ............. 422
M504-428 ............. 422
M504-497 ............. 424
M504-548 ............. 419
M540-000............. 419
M540-051 ............. 419
M540-056 ............. 419
MS-J175 ................ 385
N
N123-007 .............. 113
N123-008.............. 113
N123-010............... 113
N123-011 ............... 113
N123-012............... 113
N123-013............... 113
N123-020 .............. 115
N123-021............... 111
N123-022 .............. 111
N123-032 .............. 111
N123-034 .............. 112
N123-035 .............. 112
N123-040 .............. 115
N123-043 .............. 111
N123-045 .............. 113
N123-055 .............. 113
N123-056 .............. 111
N123-057 .............. 111
N123-059 .............. 113
N123-062 .............. 114
N123-076 .............. 113
N123-085 .............. 112
N123-086 .............. 112
N123-087 .............. 112
N123-097 .............. 113
N123-098 .............. 113
N223-062.............. 114
N223-063.............. 114
N223-066 ............. 113
N523-000 ............. 112
N523-001 .............. 112
N523-002 ............. 112
N523-013 .............. 114
N523-019 .............. 114
N523-020 ............. 114
N523-021 .............. 115
N523-022.............. 315, 318, 347
N523-023.............. 318
N523-025.............. 114
N523-041 .............. 114
N523-054.............. 114
N523-055.............. 114
N523-063.............. 114
N523-064 ............. 114
N523-065.............. 113
N523-066 ............. 113
N523-067.............. 114
N523-069 ............. 114
N523-091 .............. 113, 346
N523-092.............. 115
N523-105 .............. 114
N523-108 .............. 422
N523-123............... 315, 318
N523-124 .............. 112
N523-127............... 113
N523-131 . . . . . . . . . . . . . . . 114
N523-135 .............. 115
N523-149 .............. 114
N523-177 ............... 114
N523-194 .............. 114
N523-209.............. 112
N523-210 .............. 112
N523-211 ............... 112
N523-218 .............. 111
N523-221............... 111
N523-222 .............. 111
N523-223 .............. 111
N523-224 . . . . . . . . . . . . . . 111
N523-225 .............. 111
N523-240.............. 115
N623-017 .............. 114
N623-030 ............. 115
P
P513-023 .............. 423
P513-024 .............. 423
PL7-2 .................. 280
PL7-3 .................. 280
PL7-5 .................. 280
PL7-7 .................. 280
PL8-2.................. 280
PL8-3.................. 280
PL8-5.................. 280
PL8-8.................. 280
PL1001J ................ 290
PL1002J ............... 290
PL1003J ............... 290
PL2001J ............... 290
PL2002J ............... 290
PL2003J . . . . . . . . . . . . . . . 290
PL3001J ............... 290
PL3002J ............... 290
PL4001J ............... 290
PL4002J............... 290
PL4003J............... 290
Q
Q330-165 .............. 342
Q330-252.............. 342
R
R525-256 .............. 136
S
S10D................... 270
S40D .................. 270
S51PD.................. 270
S70PD ................. 270
S80PD................. 270
S170 ................... 270
S206-501 .............. 230
S206-502.............. 230
S206-504 ............. 230
S206-515 .............. 230
S206-516 .............. 230
S206-517 .............. 230
S206-518 .............. 230
S210-B60 .............. 227
S210PD ................ 250
S251PD ................ 250
S270PD ................ 250
S280PD................ 250
S290................... 250
S306-135 .............. 323
S306-151............... 254
S306-180 .............. 273
S306-182 .............. 273
S306-183 .............. 273
S605-192 .............. 316, 319
S605-194 .............. 252, 272
S605-228.............. 318, 319
S605-231 .............. 316, 318
S605-241 .............. 252, 272
S605-242.............. 252, 272
S605-289.............. 254
S605-297 .............. 254
SM01-210 .............. 388
SM01-391 .............. 388
SM01-392.............. 388
T
THP-021 ............... 264
THP-022............... 264
THP-8201-CH .......... 263
THP-8201-F-CH........ 263
THP-8219-CH . . . . . . . . . . 263
THP-8219-F-CH........ 263
THP-8301-CH .......... 263
THP-8301-F-CH........ 263
THP-8319-CH .......... 263
THP-8319-F-CH........ 263
THP-S88806-IR ....... 264
PARTS INDEX
INDEX
445
Price Book 6
Effective July 9, 2018
Part Number Page Number
TR200A ............... 416
TR201.................. 416
TR202 ................. 416
TR203 ................. 416
X
XA10-594 .............. 319
XB03-418 .............. 353
XB04-618.............. 353
XB09-195 .............. 353
XB09-795.............. 353
XB11-475 ............... 353
XB11-638............... 353
XB11-720 ............... 194
XB11-789 ............... 353
XB11-790............... 353
XB11-825............... 349
XB11-916 ............... 149
XB11-917 ............... 149
XB11-918 ............... 149
XB11-919 ............... 149
XB11-920............... 149
XB11-921 ............... 149
XB11-922............... 149
XB11-958............... 353
XB11-979............... 343
XB12-046 .............. 341
XC03-069 ............. 94, 114
XK10-992.............. 194
XL11-422 ............... 194
XL11-515 ............... 194
XL11-634 ............... 194
XL11-636............... 194
XL11-743 ............... 194
XL11-806............... 429
XL11-820............... 194
XL11-821 ............... 194
XL11-848............... 194
XL11-895............... 334
XL11-986............... 188
XN12-012............... 114
XN12-035 .............. 112
XN12-045 .............. 112
XN12-292 .............. 113
XN13-052 . . . . . . . . . . . . . . 114
XN13-053 .............. 114
XN13-054 .............. 114
XQ02-309 ............. 94, 114
XQ03-493 xx........... 125
XQ03-494 ............. 94, 114
XQ06-878 ............. 379
XQ07-351 .............. 82, 94, 114, 273
XQ07-351 xx............ 125
XQ07-351 xxx . . . . . . . . . . 273
XQ11-804 .............. 353
XQ11-935............... 334
PARTS INDEX
446
Price Book 6
Effective July 9, 2018
Notes
© 2018 Allegion
010057, Rev. 07/18
allegion.com/us
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.
As a $2 billion provider of security solutions for homes and businesses, Allegion
employs more than 7,800 people and sells products in more than 120 countries
across the world. Allegion comprises 23 global brands, including strategic
brands CISA®
, Interflex®
, LCN®
, Schlage® and Von Duprin®
.
For more, visit www.allegion.com
About Allegion

Navigation menu