Schneider Electric France L Isle d Espagnac XGCS85 RFID Reader User Manual Manual Installation Instructions
Schneider Electric Industries France L'Isle d'Espagnac RFID Reader Manual Installation Instructions
Contents
- 1. Manual (Installation Instructions).pdf
- 2. Manual.pdf
Manual (Installation Instructions).pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2064673 |
| Application ID | hwqq4PUVaSagKZRlupI0jA== |
| Document Description | Manual (Installation Instructions).pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.87kB (660814 bits) |
| Date Submitted | 2013-09-06 00:00:00 |
| Date Available | 2013-09-06 00:00:00 |
| Creation Date | 2013-05-14 12:48:18 |
| Producing Software | GPL Ghostscript 9.05 |
| Document Lastmod | 2013-05-14 12:48:18 |
| Document Title | Manual (Installation Instructions).pdf |
www.tesensors.com Diagnostic LEDs / Voyants de diagnostic / LED de diagnóstico en LED LED state Solid Green Description Tag presence 1 flash Red flashes No tag detected RFID errors Name TAG Smart antenna state A tag is detected – dialog ok Waiting for a tag Errors detected in the dialog with the tag OK Green flashes Requests received from a client Red flashes Errors in requests Error code returned to received from a client the client (no tag / bad parameters,..) Solid Green The network is OK NS operating normally (Network status) 4 flashes A duplicate IP The smart antenna operates condition exists offline 5 flashes The smart antenna The smart antenna sends attempts to get an BOOTP/DHCP requests to IP configuration from a BootP server and awaits BootP server a reply 6 flashes Operations are BootP requests timed out. normal with default The Smart antenna applied IP adressing settings the default Ip address (192.168.0.10) The smart antenna attempts 7 flashes Operations are in to acquire a new firmware. kernel mode Link Solid Green Ethernet link present OK Activity at 100 Mbps (port Flashing Green Traffic at 100 Mbps OK 1 & 2) Solid Yellow Ethernet link present OK at 10 Mbps Flashing Yellow Traffic at 10 Mbps OK On OK MS Green (Ethernet Off No power supply module) Not ready COM XGCS850C201 www.tesensors.com en EtherNet/IP Smart Antenna fr EtherNet/IP Smart Antenna es EtherNet/IP Smart Antenna - Link to the user guide and EDS file - Lien vers le guide d’utilisation et le fichier EDS - Enlace a la Guía del usuario y el archivo EDS es fr LED Name TAG COM LED state Solid Green Description Tag presence 1 flash Red flashes No tag detected RFID errors Smart antenna state A tag is detected – dialog ok Waiting for a tag Errors detected in the dialog with the tag OK LED Green flashes Requests received from a client Red flashes Errors in requests Error code returned to received from a client the client (no tag / bad parameters,..) Solid Green The network is OK NS operating normally (Network status) 4 flashes The smart antenna operates A duplicate IP condition exists offline The smart antenna sends 5 flashes The smart antenna BOOTP/DHCP requests to attempts to get an IP configuration from a BootP server and awaits a reply BootP server 6 flashes Operations are BootP requests timed out. normal with default The Smart antenna applied IP adressing settings the default Ip address (192.168.0.10) The smart antenna attempts 7 flashes Operations are in to acquire a new firmware. kernel mode Link Solid Green Ethernet link present OK Activity at 100 Mbps (port Flashing Green Traffic at 100 Mbps OK 1 & 2) Solid Yellow Ethernet link present OK at 10 Mbps Flashing Yellow Traffic at 10 Mbps OK MS Green On OK (Ethernet Off No power supply module) Not ready en Name TAG COM LED state Solid Green Description Tag presence 1 flash Red flashes No tag detected RFID errors Smart antenna state A tag is detected – dialog ok Waiting for a tag Errors detected in the dialog with the tag OK Green flashes Requests received from a client Red flashes Errors in requests Error code returned to received from a client the client (no tag / bad parameters,..) Solid Green The network is OK NS operating normally (Network status) 4 flashes A duplicate IP The smart antenna operates condition exists offline The smart antenna sends 5 flashes The smart antenna BOOTP/DHCP requests to attempts to get an IP configuration from a BootP server and awaits a reply BootP server 6 flashes Operations are BootP requests timed out. normal with default The Smart antenna applied IP adressing settings the default Ip address (192.168.0.10) The smart antenna attempts 7 flashes Operations are in to acquire a new firmware. kernel mode Link Solid Green Ethernet link present OK Activity at 100 Mbps (port Flashing Green Traffic at 100 Mbps OK 1 & 2) Solid Yellow Ethernet link present OK at 10 Mbps Flashing Yellow Traffic at 10 Mbps OK MS Green On OK (Ethernet Off No power supply module) Not ready Description / Description / Descripción es fr TAG : Tag LED TAG : Tag LED TAG : Tag LED COM : Communication LED COM : Communication LED COM : Communication LED NS : NetworkStatusLED NS : NetworkStatusLED NS : NetworkStatusLED LK/SP : Ethernet communication port Nr.1 LED LK/SP : Ethernet communication port Nr.1 LED LK/SP : Ethernet communication port Nr.1 LED M12 socket Ethernet port Nr 1 M12 socket Ethernet port Nr 1 M12 socket Ethernet port Nr 1 M8 Socket Power supply 24V M8 Socket Power supply 24V M8 Socket Power supply 24V M12 socket Ethernet port Nr 2 M12 socket Ethernet port Nr 2 M12 socket Ethernet port Nr 2 LK/SP : Ethernet communcation port Nr.2 LED LK/SP : Ethernet communcation port Nr.2 LED LK/SP : Ethernet communcation port Nr.2 LED MS : Ethernet Module Status LED Setting MS : Ethernet Module Status LED Setting MS : Ethernet Module Status LED Setting WARNING / AVERTISSEMENT / ADVERTENCIA UNINTENDED EQUIPMENT OPERATION p Turn off power supplying the Smart Antenna p This Class B product may cause radio interference. p The cable routing rules listed in the User Guide of the EtherNet/IP splitter box must be followed. p Properly fit all connectors with cables or sealing plugs and tighten. p Do not use factory configured IP address for operation. p Do not exceed the maximum number of word to read or write. p Consult the User Guide of the EtherNet/IP Smart Antenna for more detailed informations. Failure to follow these instructions can result in death, serious injury, or equipment damage. FONCTIONNEMENT IMPREVU DE L'EQUIPEMENT p Couper l'alimentation de la Smart Antenna p Ce produit de classe B peut générer des interférences radio. p Il faut respecter les consignes de cheminement du câble indiquées dans le manuel utilisateur du répartiteur EtherNet/IP. p Équiper correctement tous les connecteurs de câbles ou de bouchons d'étanchéité et les serrer. p Ne pas utiliser l'adresse IP configurée en usine lors du fonctionnement. p Ne pas dépasser la nombre maximum de mots à lire ou écrire. p Consulter le manuel utilisateur de la Smart Antenna EtherNet/IP pour plus de renseignements. Le non-respect de ces instructions peut provoquer la mort, des blessures graves ou des dommages matériels. FUNCIONAMIENTO INESPERADO DEL EQUIPO p Desconecte la alimentación eléctrica de la Smart Antenna. p Este producto de clase B puede causar interferencias de radio. p Se deben seguir las reglas de cableado enumeradas en la guía de usuario de la caja de distribución EtherNet/IP. p Ajuste correctamente todos los conectores con los cables o tapones de cierre y apriételos. p No utilice la dirección IP configurada en fábrica para el funcionamiento. p No supere el número máximo de palabras de lectura o escritura. p Consulte la guía del usuario de la Smart Antenna EtherNet/IP para obtener más información. Si no se siguen estas instrucciones pueden producirse lesiones personales graves o mortales o daños en el equipo. en Note: The user guide (N° EIO0000001601) and EDS file are stored in the internal memory and are accessible from the Web server of the XGCS850C201 Smart Antenna (page “Documentation”). These documents are also accessible on Web site “www.tesensors.com”. en Electrical equipment should be installed, operated and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material. fr Note : le manuel utilisateur (n° EIO0000001602) et le fichier EDS sont stockés dans la mémoire interne et sont accessibles à partir du serveur Web de la Smart Antenna XGCS850C201 (page “Documentation”). Ces documents se trouvent également sur le site Web “www.tesensors.com”. fr Les équipements électriques doivent être installés, exploités et entretenus par un personnel qualifié. Schneider Electric décline toute responsabilité quant aux conséquences de l’utilisation de ce matériel. Nota: La guía del usuario (N°EIO0000001603) y el archivo EDS están almacenados en la memoria interna y sepuede acceder a ellos desde el servidor Web de la Samart Antenna XGCS850C201 (página “Documentation” (Documentación)). También se puede acceder aestos documentos en el sitio web “www.tesensors.com”. Sólo el personal de servicio cualificado podrá instalar, utilizar, reparar y mantener el equipo eléctrico. Schneider Electric no asume las responsabilidades que pudieran es surgir como consecuencia de la utilización de este material. © 2013 Schneider Electric. “All Rights Reserved.” es HRBxxxxx 00 03 - 2013 4/4 HRBxxxxx 00 03 - 2013 1/4 Printed in XGCS850C201 XGCS850C201 www.tesensors.com Dimensions / Encombrements / Dimensiones XGCS850C201 40 1.57 30 1.18 4 x Ø 5,5 4 x Ø 0.217 www.tesensors.com Address configuration / Configuration de l'adresse / Configuración de la dirección en IP address setup by the Web server: mm in. 40 1.57 fr Configuration de l'adresse IP par le serveur Web : La Smart Antenna XGCS850C201 comprend un serveur Web. Le réglage usine de l'adresse IP du XGCS850C201 est : 192.168.0.10 Connexion à la page d'accueil du serveur Web Configurer l'adresse IP de l'ordinateur avec une adresse compatible à celle de la Smart Antenna (exemple : Smart Antenna = 192.168.0.10 V PC = 192.168.0.1) 27,5 1.08 es Configuración de dirección IP mediante el servidor web: Web site version : 2.0.2 25 0.98 La Smart Antenna XGCS850C201 incluye un servidor Web. El ajuste de fábrica de la dirección IP de la XGCS850C201 es: 192.168.0.10 Conexión con la página de inicio del servidor Web Configure la dirección IP del ordenador con una dirección que sea compatible con la Smart Antenna (ejemplo: Smart Antenna = 192.168.0.10 V PC = 192.168.0.1) En el explorador del PC, introduzca la siguiente dirección: http://192.168.0.10/ Copyright © 2000 - 2012, Schneider Electric. All Rights Reserved 15 0.59 28 1.1 11,5 0.45 93 3.66 65 2.56 80 3.15 The XGCS850C201 Smart Antenna includes a Web server. The factory setting for the IP address of the XGCS850C201 is: 192.168.0.10 Connection to the Web server Home page Configure the computer IP address with an address which is compatible with the Smart Antenna (example: Smart Antenna = 192.168.0.10 V PC = 192.168.0.1) From your PC browser, enter the following address: http://192.168.0.10/ OsiSense R XG RFiD - EtherNet/IP Smart Antenna - XGCS850C201 65 2.56 80 3.15 M12 connectors: Maximum tightening torque = 1.5 N.m (13.3 lb-in) Connecteurs M12 : Couple de serrage maximal = 1,5 N.m (13.3 lb-in) Conectores M12: Par de apriete máximo = 1,5 N.m (13.3 lb-in) A: 3,6 Nm / 31.9 lbf.in M8 connectors: Maximum tightening torque = 0.5 N.m (4.4 lb-in) Connecteurs M8 : Couple de serrage maximal = 0,5 N.m (4.4 lb-in) Conectores M8: Par de apriete máximo = 0,5 N.m (4.4 lb-in) en Security: User name and passwordare requested to secure the access to the web server. The factory settings are : User name= USER Password= USER fr Security: Utilization precautions / Précautions de mise en oeuvre / Precauciones de instalación Mounting on a metal structure Montage sur une structure métallique Montaje sobre una estructura de metal Distance between two Smart Antennas according to the used tag Distance entre deux Smart Antenna en fonction de l’étiquette utilisée Distancia entre dos Smart Antenna de acuerdo con la etiqueta utilizada User name and passwordare requested to secure the access to the web server. The factory settings are : User name= USER Password= USER Distance between tags Distance entre étiquettes Distancia entre las etiquetas es Security: d2 e1 e3 mm in. e >20 mm e >0.787in. User name and passwordare requested to secure the access to the web server. The factory settings are : User name= USER Password= USER d1 e4 - Home page / Page d'accueil / Página de inicio : e1 u e2 u e3 u XGHB90E340 430/6.93 750/29.53 280/11.02 XGHB221346 280/11.02 530/20.87 260/10.24 XGHB320ppp 310/12.2 540/21.26 240/9.45 XGHB211345 200/7.87 370/14.57 170/6.69 XGHB44ppp 310/12.2 400/15.75 160/6.3 d: depending on the connector size d: en fonction de la taille du connecteur d: dependiendo del tamaño del conector mm in. XGHB90E340 XGHB221346 XGHB320345 XGHB211345 XGHB444345 XGHB445345 XGHB440845 XGHB443245 d1u d2 u 110/4.33 120/4.72 190/7.48 120/4.72 70/2.76 60/2.36 60/2.36 60/2.36 140/5.51 50/1.97 60/2.36 20/0.79 40/1.57 10/0.39 10/0.39 10/0.39 en This page is used to configure the EtherNet/IP Smart Antenna address: - Choice of IP address allocation (local or automatic addressing with DHCP service) - Entry of the local IP address, subnet mask, and default gateway address - Confirm the new parameters by a click on [STORE CONFIGURATION] button - Cycle the power of the Smart Antenna to apply the new parameters fr Cette page sert à configurer l'adresse de la EtherNet/IP Smart Antenna : - Choisir le type d'allocation de l'adresse IP (adressage local ou automatique par DHCP) - Saisir l'adresse IP locale, le masque de sous-réseau et l'adresse de passerelle par défaut - Confirmer les nouveaux paramètres en cliquant sur le bouton [STORE CONFIGURATION] (Stocker la configuration) - Redémarrer la Smart Antenna pour appliquer les nouveaux paramètres es Esta página se utiliza para configurar la dirección de la EtherNet/IP Smart Antenna: - Opción de asignación de dirección IP (direccionamiento local o automático con servicio DHCP). - Entrada de dirección IP local, máscara de subred y dirección predeterminada de pasarela. - Confirme los nuevos parámetros haciendo clic en el botón [STORE CONFIGURATION] (Almacenar configuración). - Apague y vuelva a encender la Smart Antenna para aplicar los nuevos parámetros. en Select [Configuration] in the menu of the home page and then, [IP & FDR Client] in the left side of the page OsiSense XG RFiD - EtherNet/IP Smart Antenna - XGCS850C201 Wiring Diagrams / Schémas de câblage / Esquemas de cableado Web site version : 2.0.2 Copyright © 2000 - 2012, Schneider Electric. All Rights Reserved - Setup page / Page de configuration / Página de configuración : XGSZ12E12pp XGSZp2E45pp OsiSense R XG RFiD - EtherNet/IP Smart Antenna - XGCS850C201 Configuration Configuration Security HTTP User Admin EtherNet/IP Ethernet Ports (*): delivered with the Smart Antenna Livré avec la Smart Antenna Suministrado con la Smart Antenna XZCP0941Lp SNMP Agent (Ethernet M12 D coded - 5 pins socket) HRBxxxxx 00 03 - 2013 M12 Signal Contact TD+ RJ45 Contact TD- RD+ RD- – Not connected – Not connected – Not connected – Not connected 12345678 192 255 . 10 . 255 . 255 . 0 Default Gateway: 192 . 168 . 0 BN c + 24 V WH Not connected BU c 0V BK Not connected Apply Modifications in this page are applied after a power cycling of the Smart Antenna . 1 Undo es Web site version : 2.0.2 PELV Power supply - The 0 V must be connected to the earth to increase EMC strength. Alimentation TBTS - Le 0 V doit être relié à la terre pour améliorer la CEM. Alimentación eléctrica PELV - Los 0 V se deben conectar a tierra para mejorar la CEM. HRBxxxxx 00 03 - 2013 Select [Configuration] in the menu of the home page and then, [IP & FDR Client] in the left side of the page Modifications in this page are applied after a power cycling of the Smart Antenna Copyright © 2000 - 2012, Schneider Electric. All Rights Reserved 2/4 Select [Configuration] in the menu of the home page and then, [IP & FDR Client] in the left side of the page . 168 . 0 IP address: Subnet mask: Device Name: (M8 - 4 pins male socket) fr DHCP Client Automatic (BootP) RJ45 Connector 87654321 M12 - 4 pins Connector Modifications in this page are applied after a power cycling of the Smart Antenna Ethernet II IP Parameters Local (Stored IP) Connectors wiring / Câblage des connecteurs / Cableado de conectores Ethernet Parameters Ethernet Frame Format IP & FDR Client ASI67FACC1(*) 3/4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:494131a4-bedf-11e2-0000-b636ddd9d2a1 Producer : GPL Ghostscript 9.05 Modify Date : 2013:05:14 12:48:18+02:00 Create Date : 2013:05:14 12:48:18+02:00 Creator Tool : UnknownApplication Document ID : uuid:494131a4-bedf-11e2-0000-b636ddd9d2a1 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools