Schneider Electric Systems Canada ER450-XXF01 Remote Radio Data Modem User Manual ER Leaflet

Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) Remote Radio Data Modem ER Leaflet

Advertising Material

Features and SpecificationsTrio DataCom’s ER450 is an advanced high speed digital data radio modem designed for the most complex and demanding requirements in both Point-to-Point and Point-to-Multipoint (Multiple Address Radio) SCADA and telemetry applications.The powerful and flexible ER450 is part of the high performance E Series data radio system products that includes the EB450 Advanced Base / Repeater and the EH450 Hot Standby Base / Repeater stations.E SeriesRemote Data Radio - ER450 FeaturesRadio and Modem- Fully integrated radio, modem and data multiplexer- True 19,200 bps over-air data rates (also 4800 and 9600 bps) - Fast data turnaround- Simplex, Half Duplex and Full Duplex - Broad frequency range with fully synthesized all digital radio design- Full specification operation from -30° to + 60°C (+70°C option)- Compact, rugged diecast alloy housing- Low power consumption with sleep mode operation- Insurance against obsolescence with field upgradeable firmware in flash memory- Multi-function LED Front Panel Status Display- Digital orderwire option Network Management Remote Diagnostic option(In conjunction with TView+™ Software)- Exceptional network management tools- Over-the-air user configuration- Transparent Operation - simultaneous with user data- Network wide operation from any radio terminal Data Ports- Two independent configurable data ports and separate system port- Compatible with most industry standard data protocols. eg: MODBUS, DNP-3, IEC 870 etc.- Selectable 300 -76.8 k bps asynchronous RS-232 interface- Multistream™ simultaneous data streams allow for multiple vendor devices/protocols to be transported on the one radio network- Flexible data stream routing providing optimum radio channel efficiency- Internal repeater operation - buffered store and forward- Unique integrated C/DSMA collision avoidance technology permits simultaneous polling and spontaneous alarm reporting operation in the same systemInnovative and sophisticateddigital communications designs product s and solutions
RadioFrequency Range: 330-520 MHz (various sub-frequency bands available)Frequency Splits: Various Tx/Rx frequency splits - programmableChannel Selection: Dual synthesizer, 6.25 kHz channel stepChannel Spacing: 12.5 or 25 kHzFrequency Accuracy: ±1ppm (-30 to 60°C) (-22 to 140°F) ambient, Optional (-30 to 70°C) (-22 to 158°F) Aging: <= 1ppm/annumOperational Modes: Simplex, Half duplexor Full duplex*Configuration: All configuration via Windows based softwareCompliances: ETSI EN300113, EN301489FCC PART 15, PART 90IC RS119, ICES-001ACA AS4295-1995 TransmitterTx Power: 0.1 - 5W (+37 dBm) ±1 dB User configurable with over-temperature and reverse power protectionModulation: User configurable narrow band digitally filtered binary GMSK or 4 level FSKTx Keyup Time: <1mS Timeout Timer: Programmable 0-255 secondsTx Spurious: <= -37 dBmPTT Control: Auto (Data) / RTS line (Port A or B) / System Port OverrideReceiverSensitivity: -118 dBm for 12 dB SINADSelectivity: Better than 80 dBIntermodulation: Better than 75 dBSpurious Response: Better than 80 dBAFC Tracking: Digital receiver frequency trackingMute: Programmable digital muteDiagnostics (Optional)Network wide operation from any remote terminal.Non intrusive protocol - runs simultaneously with the application.Over-the-air re-configuration of user parameters.Programmable exception reporting of alarms. Storage of data error and channel occupancy statistics. In-built Error Rate testing capabilities.ConnectionsUser Data Ports: 2 x DB9 female ports wired as DCE (modem)System Port: RJ45 for diagnostic, configuration and re-programmingAntenna: N female bulkhead. Separate N (Tx) and SMA (Rx) connectors for full duplex.*Power: 2 pin locking, mating connector suppliedLED Display: Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs (for both port A and B)ModemData Serial Port #1: RS232, DCE, 600-76,800 bps asynchronousData Serial Port #2: RS232, DCE, 300-38,400 bps asynchronousSystem Port: RS232, 19,200 bps asynchronousFlow Control: Selectable hardware / software / 3 wire interfaceRF Channel Data Rate: 4800/9600/19,200 bps Half / Full duplex* Data Buffer: 16 kbyte of on-board RAMBit Error Rate: < 1x10-6 @ -110 dBm (4800 bps)< 1x10-6 @ -108 dBm (9600 bps) < 1x10-6 @ -106 dBm (19,200 bps)Collision Avoidance: Trio DataCom’s unique supervisory channel C/DSMA collision avoidance systemMultistream™: Trio DataCom unique simultaneous delivery of multiple data streams (protocols)Data Turnaround Time: <10mSFirmware: Field upgradeable Flash memoryGeneralPower Supply: 13.8 Vdc nominal (10-16 Vdc)Transmit Current: 750 mA nom. @ 1 W1600 mA nom. @5 WReceive Current: <125 mA nomSleep Mode Hardware: External control, < 1 mA Software: User configurable modesDimensions: Rugged Diecast Enclosure 170 x 150 x 42mm 6.7 x 5.9 x 1.65 inchesWith Mounting Plate 190 x 150 x 47mm 7.5 x 5.9 x 1.85 inchesMounting: Fitted Mounting PlateWeight: 1.27 kg (2.8lbs.)Options ERFD450 Full Duplex Operation with separate N (Tx) and SMA (Rx) connectorsDUPLX450BR External Duplexer, Band Reject (for single antenna operation)EDOVM Digital Order Wire Voice ModuleNEMA 4/R Stainless Steel Enclosure (IP65, NEMA 4 rated) TVIEW+™ Configuration, Network Management and Diagnostic Windows GUI SoftwareDIAGS/E Network Management and Remote Diagnostics Facilities per Radio ModemRelated ProductsEB450 Base StationEH450 Hot Standby Base Station95MSR 6 and 9 Port Stream Router MultiplexerHead Office41 Aster Avenue, Carrum Downs Victoria, Australia 3201 Phone +613 9775 0505 Fax +613 9775 0606 sales@trio.com.au www.trio.com.auInformation subject to change without notice. Copyright 2003 Trio DataCom Pty Ltd. All rights reserved. Issue 05/03Local regulatory conditions may determine the performance and suitability of individual versions in different countries. It is the responsibility of the buyer to confirm these regulatory conditions. Performance data indicates typical values related to the described unit.E SeriesRemote Data Radio - ER450* With ERFD450 full duplex option plus external duplexer for single antenna operation

Navigation menu