Schneider Electric Altivar 58 Trx Users Manual 8806CT9901

2015-02-06

• Drives Product Support and Contacts
• Product Overview
• User Interface Options and Accessories
  • Keypad Display
  • PowerSuite™ Software
  • I/O Option Boards
  • Communication Option Boards
  • Ventilation Kits
  • Conduit Entrance Kits
  • Dynamic Braking Resistor Kits
• ATV58 TRX Type H Drive Controllers
  • Features
  • Ratings
• ATV58 TRX Type E Drive Controllers
• ATV58 TRX Type F Drive Controllers
• ATV58 TRX Type N Drive Controllers
• ATV58 Type FVC Drive Controllers
  • Features
  • Applications
  • Ratings
• Terminal Locations For ATV58 TRX Type H and Type FVC Drives
• Terminal Locations For ATV58 TRX Type H Drives
• Description of Power Terminals
• Conduit Connections for Type E and Type F Drive Controllers
• Description of Control Terminals
• Description of ATV58 Type FVC Control terminals
• keypad display
  • Configuration File Storage
  • Access Control
  • Accessing Menus
• PowerSuite Option
• Magelis Terminal
• Summary of User Interface Options
• I/O Extension Cards
  • Overview of I/O Extension Cards
  • I/O Extension Card with Analog Inputs (VW3A58201U)
  • I/O Extension Card with Encoder Inputs (VW3A58202U)
  • Pump Switching Option Card (VW3A58210U)
    • Application Example (with 3 auxiliary pumps and one variable pump)
  • 115 VAC Logic Input Module (VW3A58275U)
• Communication Options
• Ventilation Kits
• Conduit Entry Kits
• Dynamic Braking Resistor Kits
  • The following charts show the motor braking torque capacity of an ATV58 TRX drive controller with...
  • Characteristics of Braking Module and Resistors
  • Calculating Resistor Size
  • Current/Time Characteristics for DB Resistor Assemblies
• Electromagnetic Compatibility (EMC) Kits
• Internal RFI Filters
• External RFI filters
• line reactors
• Motor protecting output filters
• Macro-Configuration Programming
• Drive Controller Identification Screen: Increasing Power Rating for Variable Torque Applications
• Display Parameters
• Adjustment Parameters
  • Low Speed and High Speed
  • Low Speed Operation
  • Maximum Frequency
  • Acceleration and Deceleration Ramp Times
  • Electronic Inversion of Output Phase
  • Skip Frequency
  • Low Speed Run Time Limit
  • IR Compensation
  • Slip Compensation
  • Gain
  • Stability
  • DC Current Injection
• Drive and Motor configuration Parameters
  • Input Frequency
  • Nominal Motor Voltage
  • Nominal Motor Frequency
  • Nominal Motor Current
  • Nominal Motor Speed (rpm)
  • Motor Power Factor
  • Auto Tune
  • Automatic Adaptation of the Deceleration Ramp
  • Alternate Ramp Switching using Frequency Threshold
  • Acceleration and Deceleration Ramp Profile
  • Torque Limit
  • Current Limit
  • Switching Frequency
  • Motor Noise Reduction
  • Energy Economizer
  • Volts/Hertz Adjustment
  • Current Limit Adaptation
  • Special Motor Adaptation
  • Thermal Protection of Motor
  • Thermal Protection with PTC Probes
  • Thermal Protection of ATV58 TRX Controller
• Drive Control Parameters
  • Two-Wire Control
  • Three-Wire Control
  • Reverse Inhibit
  • Analog Input Configuration
  • Keypad Command
  • Stop Priority
  • Drive Address
  • Reset Counters
• Configurable I/O Functions
  • Default I/O Configurations
  • Assignable I/O Functions
• Function Compatibility
• Assignment of Logic Inputs (LIx)
  • Reverse Operation
  • Alternate Ramp Switching
  • Jog Speed
  • + Speed
  • +/– Speed
  • Setpoint Memory
  • Preset Speeds
  • Controlled Stop Functions
  • Switching Between Two Motors
  • Freewheel Stop Below Selectable Frequency
  • Torque Limit by Logic Input (Constant Torque Rated Products)
  • Forced Local
  • Fault Reset
  • External Fault
  • Reference Switching (Auto – Manual)
  • Auto Tune
• Assignment of Analog Inputs (AIx)
  • Speed Reference Summing
  • PI Regulation
  • Encoder Speed Feedback
  • Incremental Speed Reference
• Assignment of Analog Inputs (AIx) With Analog I/O Extension Card
  • Tachometer Speed Feedback
  • Thermo Temperature Probe (PTC)
  • Torque Limit by Analog Input (on Constant Torque Rated Products)
• Assignment of Logic Outputs (R2 or LOx)
  • Drive Running
  • Output Contactor Control
  • Reference Frequency Attained (Speed Attained)
  • High Speed Attained
  • Frequency Threshold Attained
  • Current Level Attained
  • Motor Thermal Level Attained
  • Drive Thermal Level Attained
  • Loss of Follower (4–20 mA Signal)
  • Brake Logic Command
• Assignment of Analog Outputs (AOx)
  • Motor Current
  • Output Frequency
  • Ramp Output
  • Motor Torque
  • Signed Motor Torque
  • Signed Ramp
  • PI Setpoint
  • PI Feedback
  • PI Error
  • PI Integral Error
  • Motor Power
  • Motor Thermal State
  • Drive Thermal State
• Fault Management Parameters
  • Fault Relay
  • Resetting a Fault
  • Automatic Restart
  • Fault Reset Type
  • Output Phase Loss
  • Input Phase Loss
  • Loss of Follower
  • Automatic Catch of a Spinning Load (Catch-on-the-fly)
  • Controlled Stop on Power Loss
• Additional Functionality Provided in the ATV58 Type FVC Drive
• ATV58 Type FVC Adjustment Parameters
  • Ability to Shape Acceleration and Deceleration Ramps
  • + Speed/ - Speed Around a Reference:
  • Speed Loop Modes
  • Motor Fluxing Options
  • Control Mode
  • PID Regulator
  • Preset Setpoints for PID Regulator:
• ATV58 Type FVC Analog Inputs
  • Analog Torque Limit:
  • Encoder Input Application Function with I/O Extension Card And Encoder Input:
  • Encoder Input Application Function with Control Card:
• ATV58 Type FVC Analog Outputs
  • Signed Ramp (Code ORS)
  • PID Setpoint (Code OPS)
  • PID Feedback (Code OPF)
  • PID Error (Code OPE)
  • PID Integral (Code OPI)
• ATV58 Type FVC Logic Outputs
  • PID Error (Code PEE)
  • PID Feedback Alarm (Code PFA)
• Parameter summary
• Menu Overview
• Communication Parameters (Parameters Available Via The Communication Link)
  • General Configuration Registers (Continued)
  • Drive Configuration Registers (Continued)
  • Fault Configuration Registers
  • Adjustment Registers (Continued)
• Power section construction Information
  • Block Diagram for ATV58HU09M2 to ATV58HD12M2 (0.5 to 10 hp, 208/230 Vac) and ATV58HU18N4 to ATV58...
  • Block Diagram ATV58HD16M2 to ATV58HD46M2 (15 to 40 hp/50 hp VT 208/230 Vac) and ATV58HD28N4 to AT...
  • Block Diagram for ATV58HC10N4X to ATV58HC33N4X (125 to 500 hp, 400/460 Vac)
  • Integration reduces the part count which allows for smaller package size while increasing the rel...
• Performance Information (Constant Torque Rated Products)
• Speed Regulation (Constant Torque Rated Products)
  • Maximum Transient Torque
  • Operation in overspeed:
• Installation Recommendations
  • Mounting in a General-Purpose Metal Enclosure
  • Mounting in a Type 12 or IP54 Metal Enclosure
  • Calculating Enclosure Size
• Wiring Recommendations
  • Recommendations for Wire Sizing
  • Output Wiring Precautions
  • Grounding
  • Using a Line Contactor or an Output Contactor
  • Wiring Diagrams for ATV58 TRX Type H and Type N Controllers
  • Wiring Diagram for ATV58 TRX Type E Controllers (Single Phase)
  • Wiring Diagram for ATV58 TRX Type E Controllers (Three Phase)
  • Wiring Diagram for ATV58 TRX Type F Controllers (Single Phase)
  • Wiring Diagram for ATV58 TRX Type F Controllers (Three Phase)
  • Recommended Branch Circuit Protection Devices
  • Fuses
  • Circuit Breakers
• ATV58 TRX Type H Specifications
  • Environmental Specifications
• ATV58 Type FVC Specifications
  • Environmental Specifications
• Dimensions
  • ATV58 TRX Type H and Type FVC Models
  • ATV58 TRX Type E and Type F Models
  • ATV58 TRX Type N Models
  • Conduit Entry Kit (VW3A58842 to VW3A58845)
  • Conduit Entry Kit (VW3A58846 and VW3A58847)
  • Ventilation Fan Kits (VW3A58821 to VW3A58826)
  • Single-Phase Line Reactors (VW3A58501 and VW3A58502)
  • RFI Input Filters (EMC) (VW3A58401 to VW3A58407)
  • Plate for EMC Mounting
• Weights
  • ATV58 TRX Type H Models (without EMI Filter)
  • ATV58 TRX Type E and Type F Models
  • ATV58 TRX Type N Models
• Selection
  • Catalog Number Identification
    • External RFI Input Filters
• Suggested Specifications For ATV58 Type H Controllers
• Introduction
  • Class 8839 58M Enclosed AC Drive Ratings
  • Standard and Engineered Options
• Enclosure Types
  • Wall Mount
  • Floor Mount
  • Barriered
  • Class Type Number Modifications
  • Standard Features
  • Bypass Standard Features
• Power Circuits
  • Barriered Bypass
  • Line Reactor Options
  • Harmonic Filter Options
  • Line Contactor Options
• Operator Control Device Options
• Pilot Light Options
• Communication and Option Cards
• Miscellaneous Options
• Control Options
• Enclosure & miscellaneous modifications
• Power Options
  • Line Reactors:
  • Motor Protecting Output Filters:
  • Notes:
  • .Class 8839 58M Enclosed Drives 1–20 hp CT Controllers and 1–25 hp VT Controllers @ 460 V and 1–1...
  • 125–500 hp VT Controllers @ 460 V
  • 125–500 hp VT Controllers @ 460 V with Integrated or Barriered Bypass (Front and Side Views)
  • 125–500 hp VT Controllers @ 460 V with Integrated or Barriered Bypass (Conduit Views)
  • AC Drive Selection
  • Ambient Temperature/Altitude
  • AC Line & Motor Voltage
  • Power Factor
  • Harmonics
  • Input Currents Ratings (with and without Line Reactor)
  • Drive Isolation Transformer
  • Speed Range & Regulation
  • Accelerating Torque
  • Dynamic Braking
  • Follower Signals
  • PI Regulator
  • Bypass Operation
  • Motor Selection
  • Enclosure Types
  • Relay Contact Ratings
• ENCLOSED ADJUSTABLE FREQUENCY DRIVES (1 to 500 HP)
• PART 1 GENERAL
  • 1.01 SCOPE OF WORK
  • 1.02 REFERENCES
  • 1.03 SUBMITTALS
  • 1.04 WARRANTY
  • 1.05 QUALITY ASSURANCE
• PART 2 PRODUCT
  • 2.01 MANUFACTURERS
  • 2.02 GENERAL DESCRIPTION
  • 2.03 CONSTRUCTION
  • 2.04 MOTOR DATA
  • 2.05 APPLICATION DATA
  • 2.06 ENVIRONMENTAL RATINGS
  • 2.07 RATINGS
  • 2.08 PROTECTION
  • 2.09 ADJUSTMENTS AND CONFIGURATIONS
  • 2.10 OPERATOR CONTROLS
  • 2.11 AC DRIVE SEQUENCING REQUIREMENTS
  • 2.12 SYSTEM CONTROL AND INTERFACE REQUIREMENTS
  • 2.13 Communication and Networking Requirements
  • 2.14 MESSAGE DISPLAY CENTER REQUIREMENTS
  • 2.15 EMERGENCY FULL SPEED REQUIREMENTS
  • 2.16 HARMONIC MITIGATION EQUIPMENT REQUIREMENTS
  • 2.17 HARMONIC ANALYSIS
• PART 3 EXECUTION
  • 3.01 INSPECTION
  • 3.02 PROTECTION
  • 3.03 INSTALLATION
  • 3.04 TRAINING
    • END OF SECTION
• Drive Selection
• Standard Features
  • Power Circuit Descriptions
  • Test-Normal Selector Switch Description
  • Fire/Freezestat Interlock Description
• Factory Modifications
• FACTORY Modifications (CONTINUED)
• FACTORY Modifications (CONTINUED)
• Component Locations
  • Front Component Locations for 1 to 100 HP 460 Vac and 1 to 50 HP 208/230 Vac Controllers (Class 8...
• Component LOCATIONS (Continued)
  • Inside Cabinet Component Locations for 1 to 20 HP 460 Vac and 1 to 10 HP 208/230 Vac Controllers ...
• Component LOCATIONS (CONTINUED)
  • Inside Cabinet Component Locations for 25 to 100 HP 460 Vac and 15 to 50 HP 208/230 Vac Controlle...
• Controller Ratings
• Controller Ratings (continued)
• Input Current Ratings
• Input Current Ratings (continued)
• Technical Characteristics
• Dissipated Watts Loss
• Dimensions and Weights for Type 1 and Type 12K Enclosures
• Dimensions and weights for Type 1 and Type 12K Enclosures (continued)
• Recommended Spare Parts
• Circuit Breaker List
• Application Information
  • AC Drive Selection
  • Ambient Temperature/Altitude
  • AC Line & Motor Voltage
  • Power Factor
• Application Information (Continued)
  • Harmonics
  • Input Current Ratings
  • Drive Isolation Transformer
  • Application Information (Continued)
  • Speed Range and Regulation
  • Accelerating Torque
  • Follower Signals
  • Bypass Operation
  • Enclosure Types
  • Motor Selection
• SPECIFICATIONS FOR CENTRIFUGAL PUMP AND FAN APPLICATIONS CLASS 8839 Econoflex™ AC DRIVES
• General Information
• MCC Package Features
• Factory Options
• Monitoring and Indication
• AC Drive Options
• Basic “Drive” Power Circuit
• Space Requirements
• Power Contactor Options
• Pilot Devices
• Miscellaneous Options
• Multi-drive Process Line Cabinets
• Wiring Diagrams
  • Typical Wiring Diagram for MCC Altivar 58 TRX AC Drive with Basic Power Option
  • Typical Wiring Diagram for MCC Altivar 58 TRX AC Drive with Barriered Bypass Power Option
• EncDrives (Screen).pdf
  • Drive Selection
  • Standard Features
    • Power Circuit Descriptions
    • Test-Normal Selector Switch Description
    • Fire/Freezestat Interlock Description
  • Factory Modifications
  • FACTORY Modifications (CONTINUED)
  • FACTORY Modifications (CONTINUED)
  • Component Locations
    • Front Component Locations for 1 to 100 HP 460 Vac and 1 to 50 HP 208/230 Vac Controllers (Class 8...
  • Component LOCATIONS (Continued)
    • Inside Cabinet Component Locations for 1 to 20 HP 460 Vac and 1 to 10 HP 208/230 Vac Controllers ...
  • Component LOCATIONS (CONTINUED)
    • Inside Cabinet Component Locations for 25 to 100 HP 460 Vac and 15 to 50 HP 208/230 Vac Controlle...
  • Controller Ratings
  • Controller Ratings (continued)
  • Input Current Ratings
  • Input Current Ratings (continued)
  • Technical Characteristics
  • Dissipated Watts Loss
  • Dimensions and Weights for Type 1 and Type 12K Enclosures
  • Dimensions and weights for Type 1 and Type 12K Enclosures (continued)
  • Recommended Spare Parts
  • Circuit Breaker List
  • Application Information
    • AC Drive Selection
    • Ambient Temperature/Altitude
    • AC Line & Motor Voltage
    • Power Factor
  • Application Information (Continued)
    • Harmonics
    • Input Current Ratings
    • Drive Isolation Transformer
    • Application Information (Continued)
    • Speed Range and Regulation
    • Accelerating Torque
    • Follower Signals
    • Bypass Operation
    • Enclosure Types
    • Motor Selection
  • SPECIFICATIONS FOR CENTRIFUGAL PUMP AND FAN APPLICATIONS CLASS 8839 Econoflex™ AC DRIVES
• Sec01Page1 Screen.pdf
  • Product Overview
  • User Interface Options and Accessories
    • Keypad Display
    • PowerSuite™ Software
    • I/O Option Boards
    • Communication Option Boards
    • Ventilation Kits
    • Conduit Entrance Kits
    • Dynamic Braking Resistor Kits
  • ATV58 TRX Type H Drive Controllers
    • Features
    • Ratings
  • ATV58 TRX Type E Drive Controllers
  • ATV58 TRX Type F Drive Controllers
  • ATV58 TRX Type N Drive Controllers
  • ATV58 Type FVC Drive Controllers
    • Features
    • Applications
    • Ratings
  • Terminal Locations For ATV58 TRX Type H and Type FVC Drives
  • Terminal Locations For ATV58 TRX Type H Drives
  • Description of Power Terminals
  • Conduit Connections for Type E and Type F Drive Controllers
  • Description of Control Terminals
  • Description of ATV58 Type FVC Control terminals
  • keypad display
    • Configuration File Storage
    • Access Control
    • Accessing Menus
  • PowerSuite Option
  • Magelis Terminal
  • Summary of User Interface Options
  • I/O Extension Cards
    • Overview of I/O Extension Cards
    • I/O Extension Card with Analog Inputs (VW3A58201U)
    • I/O Extension Card with Encoder Inputs (VW3A58202U)
    • Pump Switching Option Card (VW3A58210U)
      • Application Example (with 3 auxiliary pumps and one variable pump)
    • 115 VAC Logic Input Module (VW3A58275U)
  • Communication Options
  • Ventilation Kits
  • Conduit Entry Kits
  • Dynamic Braking Resistor Kits
    • The following charts show the motor braking torque capacity of an ATV58 TRX drive controller with...
    • Characteristics of Braking Module and Resistors
    • Calculating Resistor Size
    • Current/Time Characteristics for DB Resistor Assemblies
  • Electromagnetic Compatibility (EMC) Kits
  • Internal RFI Filters
  • External RFI filters
  • line reactors
  • Motor protecting output filters
  • Macro-Configuration Programming
  • Drive Controller Identification Screen: Increasing Power Rating for Variable Torque Applications
  • Display Parameters
  • Adjustment Parameters
    • Low Speed and High Speed
    • Low Speed Operation
    • Maximum Frequency
    • Acceleration and Deceleration Ramp Times
    • Electronic Inversion of Output Phase
    • Skip Frequency
    • Low Speed Run Time Limit
    • IR Compensation
    • Slip Compensation
    • Gain
    • Stability
    • DC Current Injection
  • Drive and Motor configuration Parameters
    • Input Frequency
    • Nominal Motor Voltage
    • Nominal Motor Frequency
    • Nominal Motor Current
    • Nominal Motor Speed (rpm)
    • Motor Power Factor
    • Auto Tune
    • Automatic Adaptation of the Deceleration Ramp
    • Alternate Ramp Switching using Frequency Threshold
    • Acceleration and Deceleration Ramp Profile
    • Torque Limit
    • Current Limit
    • Switching Frequency
    • Motor Noise Reduction
    • Energy Economizer
    • Volts/Hertz Adjustment
    • Current Limit Adaptation
    • Special Motor Adaptation
    • Thermal Protection of Motor
    • Thermal Protection with PTC Probes
    • Thermal Protection of ATV58 TRX Controller
  • Drive Control Parameters
    • Two-Wire Control
    • Three-Wire Control
    • Reverse Inhibit
    • Analog Input Configuration
    • Keypad Command
    • Stop Priority
    • Drive Address
    • Reset Counters
  • Configurable I/O Functions
    • Default I/O Configurations
    • Assignable I/O Functions
  • Function Compatibility
  • Assignment of Logic Inputs (LIx)
    • Reverse Operation
    • Alternate Ramp Switching
    • Jog Speed
    • + Speed
    • +/– Speed
    • Setpoint Memory
    • Preset Speeds
    • Controlled Stop Functions
    • Switching Between Two Motors
    • Freewheel Stop Below Selectable Frequency
    • Torque Limit by Logic Input (Constant Torque Rated Products)
    • Forced Local
    • Fault Reset
    • External Fault
    • Reference Switching (Auto – Manual)
    • Auto Tune
  • Assignment of Analog Inputs (AIx)
    • Speed Reference Summing
    • PI Regulation
    • Encoder Speed Feedback
    • Incremental Speed Reference
  • Assignment of Analog Inputs (AIx) With Analog I/O Extension Card
    • Tachometer Speed Feedback
    • Thermo Temperature Probe (PTC)
    • Torque Limit by Analog Input (on Constant Torque Rated Products)
  • Assignment of Logic Outputs (R2 or LOx)
    • Drive Running
    • Output Contactor Control
    • Reference Frequency Attained (Speed Attained)
    • High Speed Attained
    • Frequency Threshold Attained
    • Current Level Attained
    • Motor Thermal Level Attained
    • Drive Thermal Level Attained
    • Loss of Follower (4–20 mA Signal)
    • Brake Logic Command
  • Assignment of Analog Outputs (AOx)
    • Motor Current
    • Output Frequency
    • Ramp Output
    • Motor Torque
    • Signed Motor Torque
    • Signed Ramp
    • PI Setpoint
    • PI Feedback
    • PI Error
    • PI Integral Error
    • Motor Power
    • Motor Thermal State
    • Drive Thermal State
  • Fault Management Parameters
    • Fault Relay
    • Resetting a Fault
    • Automatic Restart
    • Fault Reset Type
    • Output Phase Loss
    • Input Phase Loss
    • Loss of Follower
    • Automatic Catch of a Spinning Load (Catch-on-the-fly)
    • Controlled Stop on Power Loss
  • Additional Functionality Provided in the ATV58 Type FVC Drive