Schrader Electronics EG53MA4 Tire Pressure Monitoring Transmitter User Manual

Schrader Electronics Tire Pressure Monitoring Transmitter Users Manual

Contents

Users Manual

The device under test is manufactured by the grantee (Schrader Electronics) and sold as anOEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensurethe end-user has all applicable / appropriate operating instructions. When end-user instructionsare required, as in the case of this product, the grantee must notify the OEM to notify the end-user.Schrader Electronics will supply this document to the reseller/distributor dictating what mustbe included in the end user’s manual for the commercial product.INFORMATION TO BE INCLUDED IN THE END USER'S MANUALThe following information (in blue) must be included in the end product user’s manual toensure continued FCC and Industry Canada regulatory compliance. The ID numbers mustbe included in the manual if the device label is not readily accessible to the end user. Thecompliance paragraphs below must be included in the user's manual.This device complies with Part 15 of the FCC Rules and with Licence exempt RSS standards ofIndustry Canada. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillageest susceptible d'en compromettre le fonctionnement.****************************************************************************FCC ID:MRXEG53MA4 IC: 2546A-EG53MA4WARNING: Changes or modifications not expressively approved by the party responsible forcompliance could void the user's authority to operate the equipment. The term “IC:” before theradio certification number only signifies that Industry Canada technical specifications were met.******************************************************************************

Navigation menu