Schrader Electronics MFR Tyre Pressure Monitoring Sensor ECU User Manual MFR x

Schrader Electronics Tyre Pressure Monitoring Sensor ECU MFR x

User manual

Download: Schrader Electronics MFR Tyre Pressure Monitoring Sensor ECU User Manual MFR x
Mirror Download [FCC.gov]Schrader Electronics MFR Tyre Pressure Monitoring Sensor ECU User Manual MFR x
Document ID2801913
Application IDpdLjrK4/+6DcLtdtBWTcMA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.21kB (152597 bits)
Date Submitted2015-11-04 00:00:00
Date Available2015-11-05 00:00:00
Creation Date2015-08-19 10:55:43
Producing SoftwareMac OS X 10.10.4 Quartz PDFContext
Document Lastmod2015-11-03 17:28:21
Document TitleMicrosoft Word - MFR User Manual.docx
Document CreatorWord

  
  
Introduction
  
  
Schrader	
  Electronics	
  Ltd.	
  
Model:	
  MFR	
  	
  
TPMS	
  ECU	
  Receiver	
  
  
  
  
User	
  Manual	
  
  
The TPMS ECU will serve as the interface between TPMS Transmitters and the CAN
communications bus within the Vehicle.
The TPMS ECU will receive RF transmissions from the Transmitters.
It will decode and analyse these transmissions and provide data on the tyre pressure
and temperature and location for each wheel on the vehicle.
Based on the data from the Transmitters and an algorithm developed, the TPMS
ECU will report warnings and tyre pressures over the CAN bus.
The TPMS ECU will be installed in a position on the vehicle to be agreed between
Schrader and the Customer. The TPMS ECU location is key to its correct operation.
It is expected that the CAN interface will be fixed and that different displays can be
supported without any update to the Schrader TPMS ECU.
The receiver ECU shall decode the incoming RF signals, format the data, and
transfer the data to the CAN bus within the vehicle as required by the customer or
supplier. The system shall also automatically detect the wheel locations of each
transmitter on the vehicle.
Environmental compatibility requirements
The TPMS ECU shall operate without degradation over the temperature range -40°C
to +105°C. All components of the TPMS ECU shall be rated to a temperature range
which covers -40o C to +105o C.
The TPMS ECU Enclosure is resilient against the environment in which it is to be
placed.
The TPMS ECU complies with ETSI (RTTE governed), FCC (USA) and IC (Canada)
regulatory requirements.
  
  
Schrader	
  Electronics	
  Ltd.	
  	
  
11	
  Technology	
  Park,	
  Belfast	
  Road,	
  Antrim	
  BT41	
  1QS,	
  Northern	
  Ireland	
  	
  
United	
  Kingdom	
  
  
  
  
Regulatory	
  Compliance	
  
  
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
(Section 15.21)
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
Label: ( Section 15.19)(a)(3)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation
  
Schrader	
  Electronics	
  Ltd.	
  	
  
11	
  Technology	
  Park,	
  Belfast	
  Road,	
  Antrim	
  BT41	
  1QS,	
  Northern	
  Ireland	
  	
  
United	
  Kingdom	
  

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2015:08:19 10:55:43Z
Creator                         : Word
Modify Date                     : 2015:11:03 17:28:21+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : Word
Metadata Date                   : 2015:11:03 17:28:21+08:00
Keywords                        : 
Producer                        : Mac OS X 10.10.4 Quartz PDFContext
Format                          : application/pdf
Title                           : Microsoft Word - MFR User Manual.docx
Document ID                     : uuid:509ae454-259a-4671-a3cc-6594a8aae445
Instance ID                     : uuid:d07ed11c-98bd-4d5f-9acf-b23c8acfa876
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MRXMFR

Navigation menu