Schrader Electronics SHS4 Tyre Pressure Monitoring Sensor User Manual

Schrader Electronics Tyre Pressure Monitoring Sensor

User manual

   Tyre Pressure Monitoring Sensor  Schrader Electronics Ltd.    Model:     SHS4  Equipment Category:  TPMS  Intended Use:  Low Power Short Range Device sensor 433.92 MHz   The device under test is manufactured by the grantee (Schrader Electronics) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end user.   Schrader  Electronics will  supply  this  document  to  the  reseller/distributor  dictating  what must be included in the end user’s manual for the commercial product.    INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL  The  following  information  (in  blue)  must  be  included  in  the  end  product  user’s  manual  to ensure  continued  FCC  regulatory  compliance.  The  ID  number must  be  included  in  the manual  if  the  device  label  is  not  readily  accessible  to  the  end  user.  The  compliance paragraph below must be included in the user's manual.  FCC ID: MRXSHS4  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1)  This  device  may  not  cause  harmful  interference,  and  (2)  This  device  must accept any interference received, including interference that may cause undesired operation.  WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu