Schrader Electronics SUZ3MA4 Tire Pressure/Temperature Monitor Transmitter User Manual CLAx

Schrader Electronics Tire Pressure/Temperature Monitor Transmitter CLAx

user manual

Re: Certification for Schrader Transmitter Model/PN(s): 43130-54J2 FCC ID: MRXSUZ3MA4 IC: 2546A-SUZ3MA4 The device under test is manufactured by the grantee (Schrader) and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. Schrader will supply the following information to the reseller/distributor dictating what must be included in the end user’s manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL The following information must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual. ************************************************************************ FCC ID:MRXSUZ3MA4 IC: 2546A-SUZ3MA4 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. ************************************************************************

Navigation menu