Scientech Electronics MXLN Mini Light Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1937527
Application ID	zR9bf5g3BUmoYGvnbnBKOQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	93.95kB (1174351 bits)
Date Submitted	2013-04-11 00:00:00
Date Available	2013-04-11 00:00:00
Creation Date	2012-11-28 09:48:07
Document Lastmod	2013-02-20 11:02:17
Document Title	User Manual

MX-3L MINI LIGHT DETECTOR
INTRODUCTION
MX»3L is a mini type light de|ectot to detect the ambient light iutensrty. it can he used as a control
device to control a window shutter when srm goes up or turn on a light when srrrr goes down. II nlso can
he on nlonn device to issue olar in when someone hints on a light in a dark mom (24»Hour Zone).
MX’ 3L llarker
Light
Sensol~ ,
Sensitivity m T‘ Appmchtug
Switch — _ -Magne) )0
LED —> m lest
Tnhsp-rznl Covzr
INSTALLATION
A, Enrolling Code
L Open the case by usrug a blade type screw driver (rent the marker side and insert a 3v CR-2032
Lithium banely. (Panasonic is recommended).
2. Select “Illsinllel Made“ on the Base Unit. and enter installer Password to gain access authority.
Then selsot \Set Device\Eluoll Devree\Specrsl Sensol‘\Emel Zone No. to enroll the ID of the MXr3L
hy using a magnet to approach the marker side of the MX-3L. You may change its various nttrihutes
under\Set Device\Chtmge Device Setting\3peotal Sensor Change, to tulml dlfierem requirements.
3. User also can enroll or change device settings by running the HyperSeerneLinlr sottware on a PC,
(Reter to HyperSeeureLiulr User Guide)
E. Loetttion (Important Notice: This sensor ulu’t he put on metal surface.)
The dclcuct’s transparent cover should face the light coming dilecnon.
Note: The RFtrnus ‘ ion range will be extremely shrunk due to rodloslgnal nttenuntion it
the traustnitte put on metal surface
Testing
1, Usmg a magnet to approach the marker side) the transmission LED tlashes onoe it the light
intensity is below the Ihlesllold level, flashes twice if the light intensity is shove the threshold level.
2, If the MXJL has been enrolled in the L330 Base UniL the Base Unll shows the signal
received with RF strength dB value on the LCD display.
Note: For slilhle operation, the slglml strength should he ahove 4MB (standlrd version Base
Unit). If the signal strength Is too low, the deleclnr or Base Unit should he relocated to
matte the receiving signal its high as possible.
Sensitivity Selector (sz)
swt swz ThresholdLevel (TL) lightintensityreierenee
On On 100 Lllx (highest sensitivity) Home Readiog environment 250400 Lux (default)
On Olf SOD Lux Sun Iisc/ Sun sei (olnside) SOD-1.000 Lux
Off On ZODULHX Rain dz (oulstde) 2.500-3,500Ltlx
Off oer 4000LnxUmveslsellslliI/ity) Sunnydayteutsrde) 5e000720,000Lux
OPERATION
men can he used as a control or alarm device by the settings in the Base Unit and II operates sccordtng
to the following table: (TL means Threshold Level)
Type 0 elation Action on tugger
High Corresponding switoh(s) Or. when light intensity shove the TL.
Control Corresponding switelr(s) on when light mteusity below the TL.
Low Corresponding switeh(s) On when light intensity below the TL.
Corresponding stviteh(s) on when light intensity shove the TL.
High AlurnrwhenlightintensrtyohovetheTL
Alarm Restore when light intensity below the TL
Low Alhrlnwllcn light rntensitylrelowtheTL
Restore when light intensity above the TL
SPECIFICATIONS
Power: one 3V CR»2032 lllhinm battery
RP s|gna|s: Above TL/Below TL, Baflcly Low. Heanheat (@60 mm), Power on new (@powcr on)
Sensor, NzPiCs (Cadmium Free) Iype
Light Inlensiky Threshold Level: lODLux, SODLuX, ZOOOLux‘ AOUOLux, (+/r40%), selecmble
Currem Dram: lUuA @ standby, ZDmA @ RF opemion
Estimated Baneiy Life 1 year (@ actuated 10 limes/day)
Opemnng Temperamre: -10~ 40°C
Size: 35 x 38 X10 mm
Weight: about 12g (\vnh battery)
Manual-Eackcoveupg (2544xasesx16M peg)
WARRANTY
The Manufacturer warrants its products (hereinafter referred to as the Product) to
be in conformance with its own plans and specifications and to be free of defects
in materials and workmanship under normal use and service for a period of twelve
months from the date of shipment by the Manufacturer. The Manufacturer’s
obligations shall be limited within the warranty period. At its option, to repair or
replace the Product or and part thereof. To exercise the warranty the Product must
be returned to the Manufacturer freight prepaid and insured.
This warranty does not apply in the following cases: improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident
or tampering, and repair by anyone other than the manufacturer.
This warranty is exclusive and expressly in lieu of all other warranties, obligations
or liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness for a particular purpose, or otherwise. In no case shall
the Manufacturer be liable to anyone for any consequential of incidental damages
for breach of this warranty or any other warranties whatsoever, as aforesaid.
This warranty shall apply to the Product only. All Products, accessories or
attachments of others used in conjunction with the Products, including batteries,
shall be covered solely by their own warranty, if any. The Manufacturer shall not
be liable for any damage or loss whatsoever, whether directly, indirectly,
incidentally, consequentially or otherwise, caused by the malfunction of the
Product due to Products, accessories, or attachments of others, including batteries,
used in conjunction with the Products.
The Manufacturer shall have no liability for any death, personal and/or bodily
injury and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.
NOTE: The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
To comply with the FCC RF exposure compliance requirements, this device and
its antenna must not be co-located or operating to conjunction with any other
antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause hannful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation,
CE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2013:02:20 11:02:17+08:00
Create Date                     : 2012:11:28 09:48:07+08:00
Page Count                      : 3
Mod Date                        : 2013:02:20 11:02:17+08:00
Creation Date                   : 2012:11:28 09:48:07+08:00
Metadata Date                   : 2013:02:20 11:02:17+08:00

EXIF Metadata provided by EXIF.tools