Scientech Electronics PT3 Medical Button User Manual
Scientech Electronics Co., Ltd. Medical Button
User Manual
ACCESSORIES The LS-30 system includes a full range of accessories, so you can customize many feature of your security system. All the radio transmitters used in the LS-30 system, except the Remote Controller, have a unique random code that is set by the factory with 16,777,216 combinations in total. Also with specially designed transmission timing control, the LS-30 system can effectively prevent mutual interference from other transmitters in the system. The Remote Controller uses copy-preventing hopping-code technology, changing its radio code every time you press the button. The combinations possible through this hopping-code are up to 7.3 X 1019. To comply with the regulations in most countries, radio power is limited to below 10mW, and effective range is about 100 meters measured at open field. The range may be somewhat less indoors, depending on the layout of building construction and furniture. You may enroll all the wireless accessories and change their related settings, either through the guidance of the interactive LCD display on the Base Unit explained in the “INSTALLATION” section that follows, or by using a computer with the proprietary software “HyperSecureLink” through an interface adapter, which offers a quicker and simpler way to perform the installation in. NOTE: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. PT-3S Introduction PT-3S is a water-proof medical button, it activates medical alarm remotely when you press the button. Installation Select “Installer Mode” on the Base Unit, and enter Installer Password to gain access authority. Then select \Set Device\Enroll Device\Medical Button\Enter Zone No. to enroll the ID of PT-3S by pressing its button Specifications: Battery: 3V Current: 1uA @ standby 15mA @ operation. Battery life: about 3 years. Water proof test condition: 50 cm deep in 25℃ water, 5 hours.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2006:01:19 11:15:37+08:00 Create Date : 2006:01:19 11:08:45+08:00 Title : untitled Producer : Acrobat Distiller 6.0 (Windows) Page Count : 2 Mod Date : 2006:01:19 11:15:37+08:00 Creation Date : 2006:01:19 11:08:45+08:00 Metadata Date : 2006:01:19 11:15:37+08:00EXIF Metadata provided by EXIF.tools