Scientech Electronics RC3N Remote Controller User Manual RC 3

Scientech Electronics Co., Ltd. Remote Controller RC 3

User Manual

REMOTE CONTROLLER INTRODUCTION RC-3 is a remote controller, which controls LS-30 Base Unit remotely. Thanks to using hopping-code technology, it is highly secure. There are four buttons on RC-3, as shown below Disarm: To disarm the system. Away: To arm the system. Home: To arm the system partially. Burglar sensors with Inactive Home Mode attribute are disabled. Panic: To activate panic alarm. INSTALLATION Select “Installer Mode” on the Base Unit, and enter Installer Password to gain access authority. Then select \Set Device\Enroll Device\Controller\Enter Zone No. to enroll the ID of RC-3 by pressing its DISARM button. You may change its various attributes under \Set Device\Change Device Setting\Controller Change, to fulfill different requirements. Remarks: If an RC-3 is set with Latchkey attribute ON, the Base Unit will call “Latchkey Number” (refer to section 4-2-1) whenever the Disarm or Away button is pressed. SPECIFICATIONS: Buttons: 4 Radio Code: hopping, with 7.3 X 1019 combinations. Battery: CR2032 button cell, 3V Estimated Battery Life: 4 years (@actuated 4 times / day) Size: 40.5 x 55.0 x 12.7 mm Weight (w/ battery, w/o key ring): about 18g DisarmHome Away Panic
Manual-BackCover.jpg (2544x3685x16M jpeg)

Navigation menu