Scientific Toys 3834-24BR BLUETOOTH CARS (TURBO RACER) User Manual OI 5931 27500 ai

Download:
Mirror Download [FCC.gov]
Document ID	2982946
Application ID	g0Kym1i2q76uLt53wCytug==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	146kB (1824988 bits)
Date Submitted	2016-05-09 00:00:00
Date Available	2016-05-09 00:00:00
Creation Date	2015-12-14 10:27:23
Producing Software	Acrobat Distiller 6.0.1 for Macintosh
Document Lastmod	2015-12-14 10:27:23
Document Title	OI 5931(27500).ai
Document Creator	Adobe Illustrator(R) 11
Document Author:	Scientific

PERFORMANCE TIPS
1. Operate your vehicle in a safe place. Do not drive in the street. Avoid driving through sand, mud, and water, which can impair
the performance of your vehicle.
2. Do not leave your vehicle near sources of heat or under direct sunlight for long periods of time.
3. Do not expose your vehicle to humidity for long periods of time as dampness can damage interior mechanism.
4. Clean the toy vehicle regularly with a slightly damp cloth.
5. When the vehicle slows down or begins to move erratically, replace the batteries with new ones.
6. Concrete walls, metal posts, wire fence, and other electrical appliances and machineries can interfere with the transmission
signal and result in erratic performance of your vehicle. In this case, change to a different location.
7. If another radio control vehicle or CB radio is operating at your same location, they may interfere with the performance of
your vehicle.
8. Alkaline batteries are highly recommended.
BATTERY CAUTIONS
1. For maximum performance, use alkaline batteries.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries
4. Do not recharge non-rechargeable battery.
5. Ensure batteries are inserted with the correct polarity.
6. Remove batteries when toy is not in use.
7. Remove exhausted batteries from toy and dispose of in accordance with the makers recommendation
8. Rechargeable batteries should only be charged under adult supervision.
9. Remove rechargeable batteries from toy before charging.
10. The supply terminals are not to be short-circuited.
SMARTPHONE CONTROLLED
TURBO RACER
OPERATING INSTRUCTIONS:
Battery/Batteries should be installed by an adult only. The toy is not intended for children under 3 years old.
Keep packaging for reference since it contains important information. Exhausted batteries are to be removed from the toy.
Motion
WARNING:
NOT SUITABLE FOR CHILDREN UNDER THE AGE OF 36 MONTHS DUE TO SMALL PART(S) AND ENTANGLEMENT/
STRANGULATION HAZARDS.
PACKAGING MATERIALS ARE NOT TOYS.
PLEASE REMOVE ALL PACKAGING AND PACKING TAGS/WIRES BEFORE GIVING THIS TOY TO YOUR CHILD.
COLOUR, DESIGNS AND DECORATIONS MAY VARY FROM THOSE SHOWN IN THE PHOTOGRAPHS.
HAIR ENTANGLEMENT MAY RESULT IF THE CHILD'S HEAD IS TOO CLOSE TO THE MOTORISED UNIT OF THIS TOY.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT
If you experience any problems or issues with this item, do not take it back to the store where you purchased.
Please email service@scientific.com.hk and we will be happy to assist you in resolving any issues you may have.
We thank you for your purchase.
Left, Right, Forwards, Backwards
Bluetooth® Smart technology
Battery Requirement:
Vehicle: 3 x AAA batteries(not included)
Battery Installation:
1. Make sure the ON/OFF switch at the underside of vehicle is at the OFF position. (See Diagram 1)
2. Unscrew to open the battery lid. (See Diagram 2)
3. Insert 3 x 1.5V “AAA” batteries by matching the (+) and (–) signs as indicated in the battery compartment
(See Diagram 3)
4. Replace the battery lid.
Bluetooth Declaration ID: DO28868
Bluetooth®
The
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Scientific Toys, Ltd is under license.
Other trademarks and trade names are those of their respective owners.
Apple and the Apple logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.
OFF
Battery
cover
Google Play is a trademark of Google Inc.
3 x 1.5V
“AAA”
batteries
Unscrew
to open
ON
ON/OFF
switch
Diagram 1
Diagram 3
Diagram 2
© 2016 SCIENTIFIC TOYS LTD. 1108, TOWER B,
14 SCIENCE MUSEUM ROAD, TSIMSHATSUI, HONG KONG.
PRINTED IN CHINA
O.I. NO.5931
SIZE: 297MM X 241MM
Operation:
Prepare your smartphone or tablet to set up the operation step by step.
1. Go to App Store (For Apple) or Play Store (For Andriod) search: Eztec Turbo Racer, download and install.
Play Store (For Andriod)
App Store (For Apple)
OI PN#65-5931-000-0100
7. There are 2 modes to operate the vehicle with the smartphone / tablet, Motion Sensor / Steering Wheel mode,
functions include: Forward , Reverse, Left and Right, Stop, Lights ON/OFF. (See Diagram 5,6)
Steering
Motion
Diagram 5
2. Turn ON your vehicle, slide the Power ON/OFF switch to ON position and the head lights will flash continuously.
3. Connect Bluetooth®, enable Bluetooth® on your smartphone / tablet.
4. Open the APP
, press “Engine Start”
to play. (See Diagram 4)
5. Once your smartphone / tablet is connected with
your vehicle the head lights will turn ON.
6. DO NOT try to connect one smartphone / tablet with
two vehicles at the same time. Also the connecting
process of two or more vehicles should be
performed at a reasonable distance and not at
the same time.
Diagram 4
Diagram 6
8. If the vehicle does not run straight, adjust the
"Steering Alignment Lever" on the underside
of the vehicle. (See Diagram 7)
Diagram 7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:3d083b14-a20a-11e5-9f20-001ec29f69d5
Producer                        : Acrobat Distiller 6.0.1 for Macintosh
Create Date                     : 2015:12:14 10:27:23+08:00
Modify Date                     : 2015:12:14 10:27:23+08:00
Creator Tool                    : Adobe Illustrator(R) 11
Document ID                     : uuid:3d07c012-a20a-11e5-9f20-001ec29f69d5
Format                          : application/pdf
Creator                         : Scientific
Title                           : OI 5931(27500).ai
Author                          : Scientific

EXIF Metadata provided by EXIF.tools