Scientific Toys 4203-27P 27 MHz REMOTE CONTROL TRANSMITTER User Manual OI 4598 U DRIVER ai
Scientific Toys Ltd 27 MHz REMOTE CONTROL TRANSMITTER OI 4598 U DRIVER ai
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1174616 |
| Application ID | 7fQ7OeGcOduO4EX33mShLA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.2kB (239944 bits) |
| Date Submitted | 2009-09-24 00:00:00 |
| Date Available | 2009-09-24 00:00:00 |
| Creation Date | 2009-08-08 11:59:23 |
| Producing Software | Acrobat Distiller 6.0.1 for Macintosh |
| Document Lastmod | 2009-08-08 11:59:23 |
| Document Title | OI 4598(U-DRIVER).ai |
| Document Creator | Adobe Illustrator(R) 11 |
| Document Author: | HO Wong |
FCC NOTE: THE ANTENNA PROVIDED IS A UNIQUE ANTENNA. BY INSTALLATION OF UNAUTHORIZED ANTENNA TO THIS EQUIPMENT. SUCH UNAUTHORIZED INSTALLATION COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. BATTERY INSTALLATION (For maximum performance, use alkaline batteries) Remember to take out all batteries from vehicle and transmitter after playing. 1. Do not mix old and new batteries. 2. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable batteries. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. ATTENTION PARENTS It is recommended that this toy and all accessories be periodically examined for potential hazards and that any potentially hazardous parts be repaired or replaced. Back Panel of transmitter Cable HOW TO INSTALL BATTERY IN VEHICLE 1. Turn over the vehicle and push the ON/OFF to "OFF" position. (See Diagram #1) 2. Open the battery cover. (See Diagram #1) 3. Follow the "arrow" sign and insert the battery pack into the battery compartment. Make sure the (+) (–) polarity is correct. (See Diagram #2) 4. Replace the battery cover. Antenna tube 2 x AA Batteries Open How to install batteries in Transmitter 1. Slide open the battery cover at the back of the transmitter and insert 2 x AA battery into the battery compartment according to polarity (+) and (–). (See Diagram #3) 2. Replace the battery cover. DIAGRAM 3 DIAGRAM 4 Note:Remove battery after you have finished using your vehicle OFF OFF Battery cover On On/Off switch Unscrew to open ON ON 5 x AA Batteries DIAGRAM 5 DIAGRAM 1 DIAGRAM 2 0681 © 2009 SCIENTIFIC TOYS LTD. 1108, TOWER B, 14 SCIENCE MUSEUM ROAD, TSIMSHATSUI, HONG KONG. PRINTED IN CHINA O.I. NO.4598 SIZE: 210 X 148.5MM PN#65-4598-000-0100 How to Play 1. Build up antenna by passing the cable through the antenna tube provided and plug into the vehicle tightly. Otherwise, the vehicle will not work. (See Diagram #4) 2. Slide the Power switch to ON position to turn on the transmitter and vehicle. (See Diagram #5) 3. After playing, slide the Power switch to OFF position to turn off the transmitter Driving Forward Press the FORWARD trigger at the back of transmitter for forward running. (See Diagram #6) Driving in Reverse Press the REVERSE trigger at the back of transmitter for reverse running. (See Diagram #7) Steering Operation To make left or right hand turns while driving forward, swing the transmitter to left or right while pressing the FORWARD trigger at the same time. (See Diagram #8) BATTERY CAUTIONS 1. For maximum performance, use alkaline batteries. 2. Do not mix old and new batteries. 3. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries 4. Do not recharge non-rechargeable battery. 5. Ensure batteries are inserted with the correct polarity. 6. Remove batteries when toy is not in use. 7. Remove exhausted batteries from toy and dispose of in accordance with the makers recommendation 8. Rechargeable batteries should only be charged under adult supervision. 9. Remove rechargeable batteries from toy before charging. 10. The supply terminals are not to be short-circuited. 11. The antenna wires are not to be inserted into socket outlet. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE, DUE TO SMALL PARTS. Press “Forward” Steering Right Press “Forward” Steering Left To make left or right hand turns while driving reverse, swing the transmitter to left or right while pressing the REVERSE trigger at the same time. (See Diagram #9) Front wheels steering adjustment 5. If the vehicle does not run straight forward, adjust the lever for satisfactory alignment on the underside of the vehicle. (See Diagram #10) 6. If the vehicle runs towards left, turn "Steering Alignment Lever" towards "R". 7. If the vehicle runs towards right, turn "Steering Alignment Lever" towards "L". Stop Operation To stop, release both FORWARD & REVERSE triggers. Forward Press “Forward” Swing Right Swing Left DIAGRAM 8 Press “Reverse” Press “Reverse” Swing Right Steering Right Press “Reverse” Swing Left Steering Left DIAGRAM 9 Reverse DIAGRAM 6 Steering alignment lever DIAGRAM 7 DIAGRAM 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:dc06022b-83cf-11de-a296-0011247ec63c Producer : Acrobat Distiller 6.0.1 for Macintosh Modify Date : 2009:08:08 11:59:23+08:00 Creator Tool : Adobe Illustrator(R) 11 Create Date : 2009:08:08 11:59:23+08:00 Document ID : uuid:dc05eba2-83cf-11de-a296-0011247ec63c Format : application/pdf Creator : HO Wong Title : OI 4598(U-DRIVER).ai Author : HO WongEXIF Metadata provided by EXIF.tools