Scosche BTREC IPOD/Bluetooth - Mobile Tx & Rx Car Kit User Manual IPBCK

Download:
Mirror Download [FCC.gov]
Document ID	571272
Application ID	Hk2wHujyGdX1D8SSqlyLTQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.67kB (170932 bits)
Date Submitted	2005-08-12 00:00:00
Date Available	2005-08-10 00:00:00
Creation Date	2005-06-22 16:06:24
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-08-05 10:30:33
Document Title	IPBCK.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jerrye

IPBCK
IPOD / BLUETOOTH®
MOBILE TRANSMITTER & RECEIVER CAR KIT
Congratulations on your new Scosche Bluetooth® iPod mobile transmitter & receiver car kit!
This kit allows your iPod to play through your aftermarket stereo system using Bluetooth®
wireless digital audio streaming technology.
INSTALLING THE BLUETOOTH® RECEIVER
LOCATION:
Choosing a proper location for your Bluetooth® receiver unit will have the greatest overall
effect on the performance of this system. We recommend an area at the rear of the stereo,
above the stereo or in the glove box. Locations higher in the dash will provide better
operation. Mounting the receiver low in the dash or behind large metal obstructions may
cause signal break-up and reduced range. Once installed, switched on, and level-matched,
the receiver unit does not require further access by the user.
FEATURES
RECEIVER PANELS (FIG.1)
Features:
● Easy connection and setup with
“Auto” pairing
● Digital streaming audio transmission
● Bluetooth® 1.2 compliant
● Can be paired with multiple receivers
● Universal dash mounting clip included
● Rechargeable audio transmitter with
3.5mm input jack
● Up to 15 hours of battery life
● 12 Volt car charger/adapter included
Output Level Control
(Allows level-matching
to existing Stereo/CD
sources)
Power Connection
(Insert, twist power
cable to lock in place)
RCA Audio Outputs
(Connect to Aux input
of car stereo)
OUTPUT
PWR
PART LIST
●
●
●
●
●
(1) Bluetooth® Transmitter
(1) Bluetooth® Receiver
(1) iPod Mini 4/6G Holster
(1) iPod 40/60G/Photo Holster
(1) iPod 10/20/30G Holster
●
●
●
●
●
OUTPUT
LEVEL
(1) Receiver Power Plug/Cable
(1) Universal Dash Mounting Clip
(1) 12V iPod/Transmitter Charger-Adapter
(2) Extra Long Cable Zip Ties
(2) Adhesive Hook & Loop strips
REMOVE
LOCK
SYSTEM REQUIREMENTS
● Apple iPod Media Player: Gen3/Gen4, Mini4G/6G or Photo Player (Not included)
● Aftermarket Car Stereo with Auxiliary input feature (See note below)
NOTE: Your aftermarket stereo must have an available RCA input function. The optional
Scosche adapters available to convert CD changer inputs into a pair of Auxiliary Audio inputs,
are listed below.
MIC
ON/OFF
ON
SCOSCHE CD CHANGER AUXILIARY INPUT ADAPTERS:
Part#
DCAXAALPAI
DCAXAALPM8
DCAXKEN13
DCAXAPIO11
Description
Alpine AI Net CD Changer Compatible units
Alpine M Bus (8-Pin) CD Changer Compatible units
Kenwood (13 Pin) CD Changer Compatible units
Pioneer P bus (11 Pin) CD Changer Compatible units
Microphone input
(Not used. For future
expansion.)
Power Switch
Blue Power LED
TECH SUPPORT
If you have any further questions, call our TOLL-FREE Technical HELP line:
1-800-621-3695 x3
INSTALLING THE BLUETOOTH® RECEIVER
INSTALLING THE BLUETOOTH® RECEIVER
1. Disconnect negative battery terminal. Remove aftermarket stereo.
2. Connect the Black/White wire (marked with “+”) fused power lead to the “Amp Remote
Lead” (amplifier control) wire on the back of the aftermarket stereo. The amp remote
wire is usually Blue/white. Consult the owner’s manual of your stereo for further
information. If no “Amp Remote Lead” wire is available, then use a switched +12V
power source. The switched power lead is usually a Red wire. Connect the Black
ground wire from the receiver to chassis ground or to the ground wire of stereo. (Fig. 3)
3. Connect the receiver power cable: Insert tip, twist and lock the plug into the receptacle
marked “PWR” on side of receiver unit. (See Fig. 2)
4. Attach the RCA audio cable (included) from the OUTPUT of the receiver to the auxiliary
INPUT at the back of your car stereo. If your stereo has no auxiliary input, but is CD
changer compatible, additional parts may be available to use with your system. See
“SYSTEM REQUIREMENTS” section at the beginning of this manual. (Fig. 2 & 3)
5. Switch the receiver power button to the “ON” position. Leave the receiver power button
in the “ON” position and allow your stereo to control its on/off operation.
6. Reconnect the negative battery terminal and power up your stereo. Verify the
Bluetooth® receiver has power. (LED should be flashing). If the receiver does not
power-up, skip to TROUBLESHOOTING SECTION.
7. Leave stereo power ON. Do not re-install stereo until the LEVEL MATCHING steps are
complete.
8. Set your stereo source to Aux input (iPod) or CD changer, depending on your setup.
STEREO CONNECTIONS (FIG. 3)
AUX INPUT **
AFTERMARKET
STEREO *
EFX G2
Audio Cable
RECEIVER CONNECTIONS (FIG. 2)
Chassis
Ground
FROM:
Bluetooth
Receiver
SCOSCHE
BLUETOOTH®
RECEIVER
(+) 12V Amp
Remote lead
BLACK (-)
BLACK/WHITE (+)
EFX G2
Audio Cable
FROM:
Bluetooth
Power Connector
* Typical connections. Your stereo may vary
** Additional parts may be available for units without
an Auxiliary input, but with CD Changer capability.
Power
Connector
Power Connections:
Black/White =To Amp Remote
Black = To Chassis Ground
TO:
Stereo
AUX Input
E-Z TRANSMITTER SETUP
E-Z TRANSMITTER SETUP
NOTE: The Bluetooth® wireless transmitter is designed for use inside and within
CLOSE proximity of your vehicle. Range will vary depending on many factors including
the size of the vehicle, placement of the receiver, and pre-existing or RF interference.
3. Plug in the 12V Car Charger into your vehicle’s Lighter/Power receptacle. (Fig. 7)
4. Attach the iPod and Bluetooth® Transmitter charger plugs. (Fig. 7)
CAR ADAPTER/DUAL CHARGER (FIG. 7)
RECEIVER PANELS (FIG. 4)
(TOP)
LED
Bluetooth®
Transmitter
OFF
ON
DC 5V
Power Button
(SIDE)
Charge Port
(Insert Lighter/Charger
here)
iPod® &
Holster
1. Slide your iPod into the appropriate sized holster
(Fig. 6). Three different holsters are included in the
kit for various iPod sizes. Turn the holster 90
degrees to twist and lock your iPod into the
Bluetooth® transmitter.
12V Power
socket
2. Plug the transmitter’s 3.5mm cable into the iPod
headphone port. (Fig. 5)
MENU
HEADPHONE CONNECTION (FIG. 5)
Power
LED
3.5mm MALE HEADPHONE
CONNECTOR
Replaceable
Mini Fuse
(iPod)
MENU
HOLSTER
BLUETOOTH®
TRANSMITTER
IPOD TO HOLSTER (FIG. 6)
POWER UP & AUTO PAIRING
Pairing creates a link between devices with Bluetooth® technology and allows the transmitter
to remember the receiver’s unique ID. Your iPod transmitter and receiver will automatically
pair up the first time both devices are powered.
1. Press the power button on the side of the transmitter to turn on the unit.
2. The BLUE LED will flash quickly when the two devices are pairing. Once the transmitter
and receiver are linked, the LED becomes solid. The initial pairing operation between
the two Bluetooth® devices happens within 1-2 seconds. This will not be visible during
normal use. When both the RED and BLUE LEDs are on, a PURPLE hue will emit from
the LED window. (See LED later in this manual chart for more information.)
3. On initial use, let the Bluetooth® transmitter charge for at least 4 hours.
LEVEL MATCHING & RE-INSTALLATION
Level matching will eliminate the need to unnecessarily adjust the volume when switching
between your iPod and tuner or CD player sources. Your Bluetooth® receiver includes an
output adjustment to level-match the iPod to the volume of your stereo tuner or CD player.
LEVEL MATCHING STEPS:
1. Set stereo to auxiliary source (iPod) input and adjust volume to 3/4 of maximum.
2. Set iPod volume to 3/4, then select and play a music track.
3. Switch the source selector on your stereo between the iPod, tuner and/or CD player.
4. Note any volume differences between the iPod and other audio source.
5. Use a small flathead screwdriver to adjust the output level located on the side of the
Bluetooth® receiver to match volume level of other sources.
6. Once level-matching is complete and you are satisfied with the operation, install the
receiver in the chosen location and re-install stereo. Large cable ties and adhesive
hook & loop strips are provided in the kit for receiver mounting.
LED STATUS INDICATORS
BLUETOOTH® TRANSMITTER (2 LEDs BEHIND ONE WINDOW):
BLUE LED-Flashing
BLUE LED- Solid
Pairing or searching for Bluetooth® receiver
Established connectivity with receiver and
transmitting signal. Transmitter is fully
charged.
Charging
RED LED-Solid (When connected to car
charger)
RED LED-Solid (Not connected to car
charger)
RED & BLUE (Together)-Solid [Purple]
RED Solid & BLUE Flashing
Low battery (recharging required)
Charging and Transmitting
Pairing and Charging
BLUETOOTH® RECEIVER:
BLUE LED-Flashing
Pairing or searching for Bluetooth®
Transmitter
Receiving signal link established with
Bluetooth® transmitter
Receiver switched OFF or No Power
BLUE LED-Solid
BLUE LED-Off
TROUBLESHOOTING
Symptom
Charger not charging iPod &
Transmitter
Cause
Blown Fuse:
Car fuse Panel or ‘nose’ of
power outlet adapter
Bad connection
Remedy
Replace fuse with the appropriate
fuse (same as original). If fuse
blows again contact Tech Support.
One of the two units are not
Try disconnecting and
charging
reconnecting
Receiver never gives Blue LED
No power to unit
Test both power and ground going
to receiver. Power cable must be
+12v accessory.
No sound
Auxiliary input must be selected If stereo is not selecting aux input,
from the stereo.
refer to your stereo manual. It may
need to be enabled before being
selected.
No sound with transmitter and
Transmitter lost communication Power-off both receiver and
receiver both having LEDs on.
with receiver.
transmitter. Turn back on after 10
seconds. If problem continues
contact Tech Support.
Adjust gain control on the receiver to
Volume is to low on iPod and does Receiver has not been level
increase the output or turn up iPod.
not compare to other sources.
matched.
Alternator noise is heard.
Ground loop.
Call Tech Support.
(Changes with RPM of engine.)
Sound quality decreases
Transmitter needs to be
Plug charger into transmitter while
gradually.
charged
listening to iPod.
LIMITED WARRANTY
Scosche Industries Inc. warrants this product to be free from defects in material and workmanship, for a period
of 1 year from purchase. This Scosche product is sold with the understanding that the purchaser has
independently determined the suitability of this product. This warranty DOES NOT cover any expenses
incurred from the installation, removal, or re-installation of this product incidental or otherwise. This warranty is
offered to the original purchaser of the product only. This warranty does not cover the product if physically
damaged, subjected to negligence or misuse, abuse, improper installation, alteration, accident, or an act of
God. Also excluded from this warranty are costs for the correction of faulty installation, and elimination of
electromagnetic interference. (Engine noise) The original dated sales slip or proof of purchase will establish
warranty eligibility. If the product should prove defective, within the warranty period, return the product with
proof of purchase to Scosche Industries, Inc. Scosche at its option, will replace or repair the product free of
charge, and return the product postage-paid. In no event shall Scosche Industries, Inc. be responsible for
claims beyond the replacement value of the defective product, or in any way be liable or responsible for
consequential or incidental damages. No express warranties and no implied warranties whether for fitness or
any particular use, or otherwise, except as set forth above (which is made expressly in lieu of all other
warranties) shall apply to products. Scosche industries can not be held responsible for
discrepancies/inconsistencies that may occur, due to automotive manufacturing changes or options.
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
1) This device may not cause interference, and (2) this device must accept any interference that
may be received, including interference that may cause undesired operation. The manufacturer is
not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. Such modification could void the user's authority to operate the equipment.
iPod is a registered trademark of Apple Computer,
Inc. All rights reserved. The Bluetooth® word
mark & logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by Scosche is
under license.
IPBCK REVA 06.2005 © 2005 Scosche Industries, Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6b9b880d-712d-4e5e-bf7d-9c8d102d1c8d
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2005:06:22 16:06:24-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:08:05 10:30:33-07:00
Metadata Date                   : 2005:08:05 10:30:33-07:00
Document ID                     : uuid:cd3ce92c-6c06-42eb-b2b0-74298f0d5969
Format                          : application/pdf
Creator                         : jerrye
Title                           : IPBCK.doc
Author                          : jerrye

EXIF Metadata provided by EXIF.tools