Scosche BTTRNS03 Bottom Dock BlueTooth Transmitter for iPod User Manual

Download:
Mirror Download [FCC.gov]
Document ID	764636
Application ID	Efli2sUZ4yWLdWEbCX26Ag==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	59.46kB (743247 bits)
Date Submitted	2007-03-05 00:00:00
Date Available	2007-03-05 00:00:00
Creation Date	2006-12-27 09:28:23
Producing Software	Adobe PDF library 7.77
Document Lastmod	2007-03-01 16:08:38
Document Title	Users Manual
Document Creator	Adobe Illustrator CS2

IPBTT
CHARGING THE BATTERY
NOTE:
Before using the IPBTT for the first time, charge the battery a full 3 hours.
The IPBTT will also charge your iPod battery through the IPBTT power port.
BOTTOM DOCK BLUETOOTH® TRANSMITTER FOR IPOD
1. Plug the Mini Connector on charger into the charging jack as shown in illustration.
2. Connect USB Cable to an available PC or Laptop USB port.
3. Charge Battery for 3 hours (LED will illuminate RED when charging)
4. The RED LED will turn off when charging is complete. Unplug the IPBTT
and enjoy up to 10 hours of use.
5. Purchase wall and car adapters to charge at home and/or on the road.
(IPPWR / IP2IN1 - Sold Separately)
Congratulations on your purchase of the IPBTT. This unit incorporates the latest Bluetooth®
technology for seamless integration with most Bluetooth® A2DP enabled products. Before
using, please read this manual carefully.
FEATURES/SPECS
Lithium-ion 10 hour Rechargeable Battery (450mAh capacity)
Designed with 30-pin iPod bottom dock (All iPods EXCEPT Shuffle, Gen 1, Gen 2)
Wireless Range: Up to 30 Feet (10 Meters)
Bluetooth® V1.2
Transmitter Power < 3dbm
Receiver Sensitivity: -78+4dm
Supported Profiles: Advanced Audio Distribution Profile (A2DP) / Audio Video Remote
Control Profile (AVRCP)
Frequency Range: 2.4Ghz - 2.4835Ghz
Dimensions: 55x40x10mm
Weight: 16 grams
Certifications: FCC
Mini Connector
Charging Dock
PAIRING THE TRANSMITTER WITH BLUETOOTH® DEVICES
IPBTT OVERVIEW
SCOSCHE
UBR/UBRH
(Not Included)
Dual RED/BLUE
LED Indicators
Power Button
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:1) This device may not
cause interference, and 2) this device must accept any interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. Such modification could void the user's authority to operate the equipment
If you have any further questions, call our TOLL FREE number:
IPBTT
TECHNICAL HELP LINE 1-800-361-3695 Ext.3
SCOSCHE
UBHP
(Not Included)
IPBTT
NOT TO SCALE
PAIRING NOTES:
The IPBTT transmitter must be paired with a Bluetooth® receiving device before use.
It is designed for AUTO-Pairing functionality. (Passcode = 0000)
Keep the IPBTT and Bluetooth® receiving device within a distance of 3ft. (1 Meter)
during pairing.
Compatible devices must be Bluetooth® V1.2 supporting A2DP profile.
1. Power up your Bluetooth® receiving device (such as Scosche wireless headphones or
Scosche Bluetooth® receiver) to place it into pairing mode. If needed, consult your
Bluetooth® products manual for information on pairing or discovering other
Bluetooth® devices.
2. While the Bluetooth® receiver LED is flashing, press and hold the power button on the
IPBTT for 3 seconds. The Blue LED indicator light will flash indicating the unit is in
pairing mode.
3. Initial pairing can take a few minutes. If pairing is successful, the IPBTT's LED will switch
from flashing quickly to flashing slowly.
4. Test the connection by plugging the IPBTT into your iPods bottom dock connection with
an audio selection playing. You should hear the audio through your Bluetooth® receiving
device.
5. If pairing is not successful, repeat steps 1-4 above. Make sure both
devices enter pairing mode at or near the same time. Power off any other Bluetooth®
device that you do not intend to pair with the IPBTT as these units may interfere or
prevent pairing of other nearby devices. If you still cannot successfully pair two devices,
call Tech Support at (1-800-621-3695 Ext.3)
OPERATION
LED CHART
POWER ON/OFF
Press the Power Button for 3 seconds to turn the transmitter ON or OFF.
CONNECTION
Connect IPBTT to the bottom dock of your iPod. Turn the IPBTT on, then turn on your
Bluetooth® headphones or receiving device. Once the two devices are paired, enjoy the audio.
REMOTE CONTROL SOURCE FUNCTIONS
ONLY when used with a receiving device that also supports the AVCRP profile for remote
control functions. ( Scosche Bluetooth® headphones - UBHP)
- PLAY/PAUSE
Press the power button on your Bluetooth® headphones (or other receiving devices)
to PLAY or PAUSE the current track. Do not hold down the power button for
for more than 1 second or it may turn off the pwer.
(NOTE: Volume control will no longer be controlled through iPod wheel, only
through Bluetooth® device controls).
- TRACK UP/DOWN
1. Press and hold the volume up button to skip forward to the next track.
2. Press and hold the volume down button to skip back to the beginning of the song.
3. Press and hold the volume down button a second time to skip backward to the previous track.
Dual RED/BLUE
LED Indicators
LED COLOR
STATUS
Blue LED fast blinking
Pairing Mode
Blue LED slow blinking
Connected with Bluetooth® device
Red ON and/or Blue Slowly Blinking
Charging and/or connected with
Bluetooth® device
Red LED Solid
Battery is currently charging or LOW
on battery life
Red LED off
Charging Complete
PROBLEM
TIPS/SOLUTION
Red LED indicator light is bright
Low Battery - Recharge Necessary
Unit drops wireless link
The connection range varies on the
surrounding environment. Range is
not guaranteed to be 30 feet in all
situations. Range can be reduced by
other electronic devices, include cordless
phones, microwaves and typical household
electronics.
Unit loses wireless for no reason
Check for other competing Bluetooth®
or 2.4Ghz electronic devices in close proximity
to the IPBTT. Power down these devices.
IPBTT won't pair with my device
Make sure both devices enter pairing mode
at or near the same time. Make sure your
Bluetooth® device allows auto-pairing.
Make sure your Bluetooth® device uses a
Passcode of "0000" and has A2DP profile
enabled.
No audio heard from transmitter
Check to make sure the two products
successfully pair and both devices are
powered ON. Make sure you are within
range of the IPBTT. Make sure source
volume is not muted.
Power Button
This product may not be compatible with all Bluetooth® features on all Bluetooth® enabled devices. This may
or may not include send/end control functions, volume adjustment and voice dialing. Please consult your
Bluetooth® enabled cell phone operation manual for specific features and instructions.
CARE AND MAINTENANCE
1. Keep this IPBTT unit away from moisture. Sources of humidity and all types of liquids will
corrode electronic circuits.
2. Keep this IPBTT unit away from high heat. Extreme temperatures will shorten the life of
electronic circuits and could possibly melt the plastic case. For example, do not store unit
in direct sunlight on a vehicle dashboard.
3. Do not attempt to open or repair the transmitter. Non-expert handling may damage it and
void any all possibly warranty claims.
4. Don't use harsh chemicals, cleaning solvents or detergents to clean the unit.
LIMITED WARRANTY
Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 90 days from purchase. This
Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty
is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence
or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by
accident or which has been miss used, disassembled or altered.
The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period,
return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and
return the product postage paid.
In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable
or responsible for consequential or incidental damages. No empress warranties and no implied warranties, whether for fitness or any particular use
or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche. Scosche
Industries cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 12.0
For                             : Scosche,
Title                           : IPBTT (FINAL).pdf
Create Date                     : 1/31/2007 3:00 PM
Bounding Box                    : 12 -1230 780 595
Creator Version                 : 12
Container Version               : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:81db14d7-ffa2-4a34-9713-e701ab8ec262
Producer                        : Adobe PDF library 7.77
Modify Date                     : 2007:03:01 16:08:38-08:00
Metadata Date                   : 2007:03:01 16:08:38-08:00
Creator Tool                    : Adobe Illustrator CS2
Thumbnail Width                 : 108
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6166 bytes, use -b option to extract)
Document ID                     : uuid:ff8c78f2-4302-4ada-aaea-9107b6ae1933
Instance ID                     : uuid:e5b36430-7d63-47e4-ae36-1ba9280e01b7
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools