Contents
- 1. Manual
- 2. Addendum
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2142503 |
| Application ID | I7Ob9KtgBlXv1eX0TU8RLw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 31.82kB (397755 bits) |
| Date Submitted | 2013-12-13 00:00:00 |
| Date Available | 2013-12-13 00:00:00 |
| Creation Date | 2013-11-26 12:17:08 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2013-11-26 12:17:10 |
| Document Title | Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
RHYTHM RTHM17/RTHM19 Performance Heart Rate Monitor and Biometric Sensor USER MANUAL !!Warning!! This is not a medical device and is intended for training and recreational use only. Consult a physician prior to use to determine appropriate heart rate zones. Notice RHYTHM Heart Rate Monitors are waterproof to IEC Standard 60529 IP67. It can withstand immersion in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to the unit. PRELIMINARY Care Instructions • • • • To ensure accurate readings, clean the sensor lens with a soft cloth. Use a soft cloth with ONLY mild hand soap and cool water to wipe down the armband, sensors and plastic housing. Use a cotton swab and ONLY rubbing alcohol to clean the charging contacts. Do not use any abrasive chemicals to clean the RHYTHM Armband, sensors or plastic housing. This will cause permanent damage. About PerformTek PerformTek sensor technology continuously measures more real-time biometric and physiological data than any other fitness monitor with a high degree of accuracy and consistency, and uses that data to give people meaningful health and fitness assessments. It seamlessly integrates into audio earbuds and other wearable devices, such as armbands and wristbands, and connects with smartphone apps people are already using while exercising. PerformTek Precision Biometrics is a licensable sensor technology that allows you to capture accurate data such as heart rate, distance, speed, cadence, calories burned and VO2 max (aerobic fitness level). PerformTek and the PerformTek design are registered trademarks of Valencell, Inc. and may not be used for any purpose without the express prior written consent of Valencell, Inc. ©2013 SCOSCHE INDUSTRIES, INC. SI 300RTHM17/RTHM19 11/13 GETTING STARTED MULTIFUNCTION BUTTON (MFB)* Press once - on/off/play/pause Twice - next track Three times - previous track Press & hold 3 seconds - turn off FRONT VIEW VOL - (lower volume) VOL + (raise volume) REAR VIEW HEART RATE SENSOR CHARGING TERMINALS USB ARMBAND CHARGING BASE *Music controls only supported by RHYTHM Smart FIGURE 1 Charging Charge the SCOSCHE® RHYTHM for 2 hours or until a solid blue light indicates the unit is fully charged. 1. Attach the charging base to the SCOSCHE® RHYTHM unit (Figure 1). 2. Connect the USB to a wall charger or your computer. 3. A red flashing LED indicates that the unit is charging. 4. Remove the charging base as shown (Figure 2). FIGURE 2 USING THE ARMBAND MONITOR FIGURE 3 Wear armband on the upper portion of the forearm. Sensor should be on the inside or top of forearm. It should be worn snug enough not to move on your arm, but NOT so tight that it restricts arm circulation (Figure 3). Initial Setup with Bluetooth Smart Fitness Apps 1. Set Bluetooth on the device to ON. 2. Find the Sensor Settings menu in the Bluetooth Smart Fitness App. 3. Connect the RHYTHM armband by turning it on. Initial Setup with Bluetooth Smart devices (Sports Watches & Fitness Equipment) 1. From the device settings menu select “Add HR sensor” 2. Connect the RHYTHM armband by turning it on. Initial Setup with ANT+ devices (Sports Watches & Fitness Equipment) Only supported in the RHYTHM Plus armband: Turn on the armband and move within range of your display device. Note: Heart Rate Monitoring will work with most Bluetooth Smart Fitness Apps. Music Controls and Workout Recording are only supported in the RHYTHM Smart armband and will only work with Apps which have integrated the Scosche BLE SDK (available at www.scosche.com). For a list of the latest Apps that have integrated the Scosche BLE SDK please visit www.scosche.com. LED Indicators (Bluetooth Smart Mode) 1. Alternating RED/BLUE – the armband is waiting for a connection. a. If no connection the armband will power down after 60 seconds. b. If a connection is established and then lost the armband will power down after 5 minutes if the connection is not reestablished. c. Only supported in the RHYTHM Plus armband: Armband will only power down if removed from the forearm for more than one minute 2. Three (3) BLUE blinks – the armband has connected successfully. 3. Slow purple blink – you are in your HR zone, or no HR zone has been selected, but the monitor is running. 4. Slow BLUE blink – you are below your HR zone. 5. Slow RED – you are above your HR zone. 6. Alternating 3 slow RED and 3 slow BLUE – recorded workout is syncing with the Fitness App. 7. The LEDs will freeze while the recorded workout is being deleted from the armband. Normal LED operation will resume once deletion is complete. LED Indicators (ANT+ Mode) 1. Slow purple blink – The HR monitor is on and normal operation. USING THE ARMBAND MONITOR (cont’d) Recording a Workout 1. To record a workout on the armband using the Scosche RHYTHM App: a. Connect the RHYTHM Smart armband to the RHYTHM App by launching the App and turning the armband on. b. Configure your workout and press Start. Feel free to leave your phone behind and let the armband record your HR, Step Rate, Speed, Distance, and Calories. i. All workouts must be STARTED from the App. ii. Pause and Resume are only supported in the App. c. When you are finished, STOP the workout. (5 ways to stop a workout) i. Press Stop from the RHYTHM App. ii. Turn the armband off. iii. Reach the 4-hour time limit. iv. Attach the charger. v. If the battery runs down during your workout, it will be recorded up to the time of battery depletion. d. To sync your recorded workout simply open the RHYTHM App and connect the armband. 2. For other Fitness Apps please review the App-specific instructions for recording. LIMITED WARRANTY Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 1 year from purchase. This Scosche product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by accident or which has been misused, disassembled or altered. The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period, return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and return the product postage paid. In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable or responsible for consequential or incidental damages. No empress warranties and no implied warranties, whether for fitness or any particular use or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche. Scosche Industries cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2013:11:26 12:17:08-06:00 Metadata Date : 2013:11:26 12:17:10-06:00 Modify Date : 2013:11:26 12:17:10-06:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:3f80633e-6255-1b4e-8033-40fc5ee54252 Original Document ID : xmp.did:C07045AD0D2368118F62E976C3E268B7 Document ID : xmp.id:5D8829F811216811822AF9BE9342502E Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5C8829F811216811822AF9BE9342502E Derived From Document ID : xmp.did:AFF8E5A78C216811B50F912782F1BE3D Derived From Original Document ID: xmp.did:C07045AD0D2368118F62E976C3E268B7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2013:11:26 12:17:08-06:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools