Scotts Accugreen 2000 75345 Users Manual
75345 to the manual 88a1c53c-cf46-4ece-aa50-aa2b8a86e802
2015-02-05
: Scotts Scotts-Accugreen-2000-75345-Users-Manual-359028 scotts-accugreen-2000-75345-users-manual-359028 scotts pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
3/28/01 11:01 AM Page 1 Calibration SHUTOFF BAR Your AccuGreen® 2000TM Spreader was calibrated at the factory. You may check the calibration as follows: 1. Adjust the micrometer setting to 6. 2. Squeeze the trigger against the handle. 3. The front edge of the shutoff bar should be aligned with the calibration line engraved on the bottom of the hopper. 4. To adjust alignment, use a small wrench to turn the black calibration screw at the lower end of the control wire leading from the micrometer insert. CALIBRATION LINE Spend a few minutes on maintenance after each use DROP SPREADER Ready to use! No assembly! 1. Never leave product in the spreader. Pour leftover material The Scotts Difference 3. Store your spreader in a clean dry place. ® NOTE: This unit does not require lubrication Thank you for purchasing a Scotts® AccuGreen® 2000TM spreader. The Scotts Company introduced the first home lawn spreader in 1946 and has continued to offer superior quality that translates into more accurate application, a betterlooking lawn, and a longer-lasting, more durable spreader. The lawn care industry’s most extensive research, design, and testing have gone into making the AccuGreen series spreaders the most accurate in their class. With its durable rustproof hopper, the AccuGreen® 2000TM spreader is Questions, Comments, Information guaranteed to give you great results — now and for many years to come. “Lawn Success Made Easy” ™ Visit Scotts’ website at www.scottslawn.com ACCUGREEN 2000 75345 Scotts No-Quibble Guarantee® STRIP IN UPC CODE 0 32247 75345 6 TT S TO LL-FR EE ® 01-AG2000 Printed in USA The Scotts Company 14111 Scottslawn Rd. Marysville, Ohio 43041 Printed on Recyled Paper UR F If for any reason you, the consumer, are not satisfied after using this product, you are entitled to get your money back. Simply send us evidence of purchase and we will mail you a refund check promptly. 125000912 Call Scotts’ toll- free Consumer Helpline: 1-800-543-TURF • Accurate application of lawn products • U-shaped handle with fingertip on/off control • Precision micrometer rate setting • Mid-Size hopper holds more than 7,500-square-feet of Scotts fertilizer • 18-inch spread width • Easy-rolling 12-inch wheels for stability and maneuverability • Rustproof hopper, agitator and polymer components • Scotts No-Quibble E ELPLIN H R Guarantee® E UM CONS 1T • Made in the U.S.A. 800-543O 2. back into the package and seal the package tightly. After each use, wash thoroughly to remove all material clinging to the spreader. Hot water may be required at times to remove stubborn residue. Allow the spreader to dry thoroughly in the sun. SC AccuGreen2000 Hang Tag PROOF OF PURCHASE ©2001, The Scotts Company. World rights reserved. INSTRUCTIONS INSIDE —SAVE FOR FUTURE REFERENCE AccuGreen2000 Hang Tag 3/28/01 11:01 AM Page 2 To use your new AccuGreen 2000 spreader: ® Set up the stand and handle 5. If the lawn product you purchased does not give the setting for your Scotts® AccuGreen® spreader, you can test for the proper setting. Empty the number of pounds the manufacturer recommends for 1,000 square feet into the spreader. Adjust the spreader to a very low setting and spread product over a 1,000-square- foot area (50 by 20 feet, 33 by 30 feet, or equivalent). Adjust the setting upward after judging how much product has been applied to the test area. Remember: it is safer to under-apply with the test and increase setting later as needed. Some fertilizers can burn your lawn if over- applied. 1. Lay the spreader down so that it rests on the front of the hopper. Lift the stand and brace, then spread the sides of the brace and insert the ends into the holes in the stand. 2. Place the spreader upright on its wheels. Raise the top half of the handle to the upright position and tighten the wing nuts by hand. With our patented locking wing nuts, no tools are needed. NOTE: Reverse steps 1 and 2 for convenient, compact storage of your AccuGreen® 2000TM spreader. Follow these application tips for guaranteed results Set the spreading rate before you begin 1. For best results, use a Scotts Lawn Fertilizer or Grass Seed Product. 1. 2. 3. 4. First check the back of your Scotts® product package for the proper rate setting number under the heading “Scotts Drop.” Some other lawn product manufacturers provide settings for Scotts drop spreaders, but using Scotts products will assure the best possible results. (If you already purchased a product which does not provide a setting for Scotts drop spreaders, you can use the method described in #5.) Be sure spreader is turned off (trigger control is away from the handle)(A). Always fill the spreader on the driveway or sidewalk — not on the lawn. Turn the micrometer rate setting barrel (B) until the proper number is visible in the window. Ready? Start walking, then squeeze the trigger to open the spreader (C). Always push the spreader when applying product. When pulled backward while open, the spreader may apply an excessive amount and damage the lawn. TRIGGER CONTROL TM (A) 2. 3. (B) (C) If your lawn is rectangular, apply product the longest direction. Apply two header strips across each end for a turning area. Do not leave the spreader open as you turn — shut it off as you reach the end of a strip, then open it as you begin the next one. If there are trees in the lawn, shut off the spreader just before getting to the trunk, then move to the opposite side and continue with the spreading pattern. If your lawn is an irregular shape, apply a header strip completely around it. Then apply product back and forth in the longest direction, shutting off the spreader when you reach the header strip. Avoid “skips” or missed streaks. This means slightly overlapping each strip over the edge of the previous strip by lining up the arrow on the hopper with the wheel track from the previous row. Do not use the wheel for alignment. TIP: Applying a slight amount of water to your lawn prior to using the spreader will highlight your rows, making consistent ARROW application easier. ARROW WHEEL TRACK FROM WHEEL TRACK FROM PREVIOUS ROW PREVIOUS ROW
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2001:03:28 11:01:42Z Modify Date : 2004:11:11 16:05:59-05:00 Page Count : 2 Has XFA : No Creation Date : 2001:03:28 11:01:42Z Producer : Acrobat Distiller 4.0 for Macintosh Mod Date : 2004:11:11 16:05:59-05:00 Metadata Date : 2004:11:11 16:05:59-05:00EXIF Metadata provided by EXIF.tools