Se Jin Electron SMB-200 Mouse User Manual SMB 200 UserMan
Se Jin Electron Inc Mouse SMB 200 UserMan
users manual
User’s Manual
MOUSE
(Model No. : SMB-200)
1.INTRODUCTION:
This specification defines the functional and performance of the SEJIN PS/2 Mouse.
2.PHYSICAL CHARACTERISTICS AND: CONFIGURATION
2-1 Mechanical performance:
2-1-1 Operating force of select switches of Mouse: 75 ±20gf.
2-1-2 The weight : 150 ±15g.
2-1-3 Roller rotate force : 25 ±15gf-cm.
2-1-4 Roller,s switch force: 200 ±60gf.
2-1-5 Cable length : PS/2 6ft Connector.
3.MAXIMUM OPERATING CONDITIONS.
3-1 Operating temperature and humi dity.
Temperature : 0 to 45
Humidity : 10% to 80% RH
3-2 Storage temperature and humidity
Temperature : -20 to 60
Humidity : 10% to 90% RH
4.ELECTRICAL SPECIFICATION:
4-1 Microsoft PS/2Mouse Compatible.
4-2 Supply voltage : DC5V ±10%
4-3 Supply current : 25mA (max)
5.PERFORMANE TEST:
5-1 Test conditions
5-1-1 Standard test condition.
The tests shall be carried at temperature of 20 ±5 and the relative humidity
of 65 ±10%
5-2 Performance spec.
5-2-1 Resolution: 400Dpi
5-2-2 Tracking Speed : 250mm/sec.
6.RELIABILITY TEST:
6-1 Mouse life test
Load : 100gf vertical force
Speed : 200 ±40 mm/sec
Travel : 500Km in any direction.
6-2 Switch life test
Switching speed : 2cycle/sec.
Operating force : 80 ±20gf
Operating cycles : 3,000,000 cycle
7.SEJIN PS/2 MOUSE INSTALLATION
l Turn the power supply off to your computer.
l Check the AUX port (PS/2 Mouse port) at the back of your computer and insert
The connrctor at the end of the mouse cable into the AUX port.
l Turn the power supply on to your computer.
l Answer the online questions in the wizard on your screen.
8.CAUTION
The mouse is mechanically very sensitive product. It should be handled
With care. Be sure not to damage it by throwing or dropping.