Se Jin Electron SMB-2200U Mouse User Manual users manual

Se Jin Electron Inc Mouse users manual

users manual

SYSTEM REQUIREMENTS       Works with Windows 98 on your computer.     USB Mouse Port   SEJIN USB 3D MOUSE INSTALLATION   Locate the rectangular 4-pin USB port on the back of the computer.   Plug the 4-pin USB (rectangular) connector into the USB port.       Answer the online questions in the wizard on your screen.    FUNCTION   SCROLL, AUTOSCROLL, PAN, ZOOM, DATA ZOOM.    CAUTION   The mouse is mechanically very sensitive product. It should be handled with care.   Be sure not to damage it by throwing or dropping.
THANKS FOR USING SEJIN OPTICAL USB 3D MOUSE  THE SEJIN OPTICAL USB 3D MOUSE   * Designed with the users in mind, it has a pleasant appearance and is convenient to   use.      * No extra power supply is required.       * It is compatible with the Microsoft USB 3D Mouse.    MAXIMUM OPERATING CONDITIONS         1) Operating temperature and humidity       Temperature : 0℃ to 45℃          Humidity : 10% to 80% RH        2) Storage temperature and humidity       Temperature : -20℃ to 60℃          Humidity : 10% to 90% RH    ELECTRICAL SPECIFICATION        1) Supply voltage : DC5V  ± 10%      2) Supply current : 50mA (max.)       3) Switch life test       Switching speed : 2cycle/sec.      Operating force : 80 ± 20gf      Operating cycles : 3,000,000 cycle
FCC NOTICE   THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,   INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED   OPERATION.    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a   particular installation. If this equipment does cause harmful interference to radio or   television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :    - Reorient or relocate the receiving antenna.    - Increase the separation between the equipment and receiver.    - Connect the equipment into an outlet on a circuit difference from that to which       the receiver is connected.    - Consult the dealer of an experienced radio/TV technician for help.     NOTE : The manufacturer is not responsible for any radio or TV interference caused by   unauthorized modifications to this equipment. Such modifications could void the user’s   authority to operate the equipment.

Navigation menu