Se Jin Electron SPR-8695T Keyboard User Manual 1

Se Jin Electron Inc Keyboard 1

Contents

users manual

User’s Manual (M/N:SPR-8695T) Sejin Electron Inc.
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Thanks for using SEJIN Mini-keyboard with track ball (MODEL:SPR-8695T) THE SEJIN Mini-keyboard with Track-ball  Designed with the users in mind, it has a pleasant appearance and is Convenient to use.  No extra power supply is required.  It is compatible with the Microsoft Keyboard and Trackball Mini-keyboard with Track-ball INSTALLATION  Turn the power supply off to your computer.  Check the PS/2 keyboard/mouse port at the back of your computer and insert The connector at the end of the Mini key-board with track ball cables into the port (keyboard/mouse).  Turn the power supply on to your computer. Using the Mini-keyboard with track ball
Using the Numeric KeyPad

Navigation menu