Se Jin Electron SWR-1027F1 Receiver User Manual users manual 2

Se Jin Electron Inc Receiver users manual 2

Contents

users manual 2

Download: Se Jin Electron SWR-1027F1 Receiver User Manual users manual 2
Mirror Download [FCC.gov]Se Jin Electron SWR-1027F1 Receiver User Manual users manual 2
Document ID150212
Application IDPNJemrrBUY7bWejbZhekyw==
Document Descriptionusers manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize89.64kB (1120556 bits)
Date Submitted2001-05-16 00:00:00
Date Available2001-05-23 00:00:00
Creation Date2001-05-16 14:06:20
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2001-05-16 14:06:37
Document Titleusers manual 2
Document CreatorMicrosoft Word 9.0
Document Author: ±èÀçÈ«

> MOUSE lNIT (BOTTOM slot-l
— 1. Ball cover 1 open to clean ball and .
2 roller when movement is not correct ' 5 Q
— . Battery cover : open to put or replace '
batteries (check correct direction) a . .
— 3. Fools: 2 tools let user move mouse »
smoothly and softly
b MOUSE KEYBOARD UNIT (BOTTOM SIDE)
— l. LEG :
there is 2 [£68 to adjust angle of
keyboard. so user can fix it to
favorite angle
— 2. Battery cover: open to put
or replace batteries (check correct direction)
0 tnstddbnofrecelvermlt
WM—200
1. Turn the power off of your tBtVI compatible PC
2. Plug connector of receiver unit into PS/2 portikeyboard and mouse
is very similar, so be careful not to plug in wrong position)
3. Turn the power on of your PC,
4. lamp on receiver unit blink for some seconds
thinking time is difter from the system)
5, WM; MOUSE is automatically detected by the system.
6, Put 2 AAA batteries in ‘WlNG MOUSE‘. It mouse does not work.
remove batteries and put again after 10 seconds. If it does not
work alter 2 or3 times trial. check battery.
7. After Wrndows°boot. movement of mouse 5 can be easily checked
by the lamp of receiver unit.
WS—200
1. Turn the power off of your IBM compatible PC(it you must plug
during power—on. you must plug mouse cable first)
2. Plug connector of receiver unit into PS/2 porttkevboard and
mouse is very similar. so be careful not to plug in wrong position)
3. Turn the power on of your PC.
4. LED lamp on receiver unit blink for some seconds [blinking time is
differ from the system)
5. ‘WING MOUSE‘ and WING—KEYBOARD‘ is automatically detected by
the system.
6. Put 2 AAA batteries in ‘WlNG lleUSE‘. lt mouse does not work,
remove batteries and put again after to seconds.
If it does not work after 2 or3 times trial, check battery.
7. Put 2 AA batteries in ‘WlNG KEYBOARD‘. lf keyboard does not work,
remove batteries and put again after to seconds.
If it does not work al'ter2 or 3 times trialcheck battery.
8. AtlertMndows ® boot, movement of mouse and key press can be
easily checked by the LED lamp of receiver unit,
0 Caution when ushg WING MOUSE
1. Don‘t let receiver unit on the floor. Cable can be damaged or
some water or dust can damage receiver unit.
2. When using mouse on steel desk, RF antenna sensitivity can be
reduced.
3. Use mouse pad for smooth movement and to protect mouse from
dust.
4, Place receiver unit as close as possible to the mouse.(within 6 feels]
0 Cleaning mouse ball
For smooth and correct movement and for long life, cleaning is
important like car.
i. Open ball cover from bottom side of mouse
2, Take out ball from mouse
3. Remove dust from ball with velvet or soft cloth
4. Remove dust from roller with thin alcoholic cotton stick
[do not use benzene, thinner, acetone)
5. Put ball in mouse and close ball cover
6. Remove dust from foot with soft tooth brush
Ne;
e P ”HQ?
QBefore you think it is our of order it
1. System can not find mouse device
W Check receiver cable connected to system correctly
(keyboard and mouse connector is very similar]
W Check receiver unit LED lamp blink when PC power on
2. Mouse cursor does not move
W Check whether battery direction
correct
W Replace batteries with new one
W Move receiver unit closer to
mouse
(RF sensitivity can be influenced .
by circumstances)
3. Mouse cursor movement is not correct
W Clean mouse ball and roller
W Replace batteries with new one
4. Keyboard does not work
W Check whether battery direction correct
W Replace batteries with new one
W Move receiver unit closer to keyboard
(RF sensitivity can be influenced by circumstances)
For more technical questions contact
http://www.wingmouse.com
@WING COM CO.,LTD
951—25, Bongchunbon—Dong‘
qunok—gu, Seoul, Korea 150—069
TEL1+82—2—874—18H
FAX:+62—2—874—1813
E—MAIL : frode©~ingmousecom
URL : hnpillwww‘wingmousecom
Manufaciurinq company
5 SEJIN CO..LTD
60—19, Koson—Dong, Keumchon—ku‘
Seout Korea 153—023
TEL:+82—2—866—3333
FAX: +82—2—866 —8567

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:05:16 14:06:37-04:00
Create Date                     : 2001:05:16 14:06:20-04:00
Author                          : ±èÀçÈ«
Creator                         : Microsoft Word 9.0
Producer                        : Acrobat Distiller 4.05 for Windows
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: GJJSWR-1027F1

Navigation menu