Seal One 8300 Bluetooth USB Secure Online Banking Device User Manual Produktinfo 8300pro eng indd

Download:
Mirror Download [FCC.gov]
Document ID	2566872
Application ID	nyHlMhjLxyJMvx90h43HRw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50kB (625002 bits)
Date Submitted	2015-03-26 00:00:00
Date Available	2015-09-22 00:00:00
Creation Date	2014-09-30 21:34:26
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2014-09-30 21:34:27
Document Title	Produktinfo-8300pro_eng.indd
Document Creator	Adobe InDesign CS5.5 (7.5.3)

ENGLISH
display
button for signing
Thank you for choosing a product of Seal
One AG.
ON / OFF
Seal One® 8300pro
To use your Seal One® 8300pro you need
to download the proper software for your
operating system. Please open a browser in
your Laptop/Tablet/Smarthone and go to:
www.seal-one.com/8300pro
and follow the step by step introduction.
connector for charging
Secure Transactions
Seal One® 8300pro combines the maximum
security for online and mobile transactions
with a very easy operation. The device is
designed for transactions based on digital
signatures (e.g. as part of an online or mobile
banking).
Please note for your own safety that
you check the transactions displayed on
the device carefully before you release
them by pressing the button.
Seal One Acceptance Partner
Where can I use Seal One® devices?
Seal One devices are accepted by all partners
of Seal One AG. They indicate the possiblibily
to use by the Seal One acceptance Logo:
You can check a list of
the partners at:
www.seal-one.com/partner
Accessories
The following accessories are included with
the Seal One® 8300pro:
- USB charging adapter
- Protection bag
- Protection case
- This user manual
Activation at an acceptance
partner
To accticate the device at an acceptance
partner, please refer to the webpage of
the partner and follow the step by step
instruction.
Registered Seal One acceptance partner
indicate the acceptance by the Seal One
acceptance logo shown at the left.
Operation of Seal One® 8300pro
The operation of Seal One® 8300pro is simple,
convenient and secure and takes place in
three steps:
1. Connect
Turn on the device and connect with the
software based on your operating system.
2.Validate
Validate the transaction data on the display
of the device.
3. Confirm
Confirm by the push of the signing button.
Handling and safty instructions
CAUTION: Failure to observe the
following safety guidelines may under certain
circumstances result in fire, electrical shock,
other injury or damage to the Seal One
unit or other components. Please ensure
that children do not have any access to the
hardware and packaging materials. Never let
children play with the device. The device and
the acessories can be swallowed by children.
Never throw the device in a fire!
The device is designed and manufactured
with great care and should be treated with
care. The following recommendations and
operating instructions should help you to
ensure a long-lasting operation and a long life
expectancy:
- avoid dropping the device and never open it
- protect against direct sunlight, high
teperatures and severe temperature
changes, this could damage movable and
electronic components and the functionality
is no longer guaranteed.
- the use of the device once it has been
damaged is prohibited.
- the housing of the device can break through
substantial impact. When not using the
device, it is recommended to put it to the
protection bag or protection cover,
- protect the device from humidity and
liquids. and do not put paint on it.
- use device the at a clean and dry place
- protect the device from dust and vapors
- do not touch the contacts with sharp or
metal objects.
- to clean, use slightly damp, lint-free cloth
and do not use harsh cleaners or solvents.
Disposal and recycling information
You must dispose of Seal One® 8300pro
properly according to local laws and regula-
tions. Because Seal One® 8300pro contains
electronic components and a battery, Seal
One® 8300pro must be disposed of separately
from household waste. When Seal One®
8300pro reaches its end of life, contact local
authorities to learn about disposal and recycling options, or simply return it to Seal One.
The battery will be removed and recycled in
an environmentally friendly manner.
European Union—electronics and
battery disposal information
This symbol means that according
to local laws and regulations your
product and its battery should be
recycled separately from household
waste. When this product reaches its end of
life, take it to a collection point designated
by local authorities for the recycling of
electronic equipment. The improper disposal
of waste electronic equipment from the consumer may be subject to fines. The separate
collection and recycling of your product and
its battery at the time of disposal will help
conserve natural resources and ensure that it
is recycled in a manner that protects human
health and the environment.
EC-Declaration of Conformity
Hereby Seal One AG declares that this equipment is in compliance with EC the essential
requirements and other relevant provisions of
Directive 2004/108/EC.
The CE mark guarntees the
fulfillment of the directives
of the European Union.
FCC compliance statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
Important: Changes or modifications to this
product not authorized by Seal One could
void the electromagnetic compatibility (EMC)
and wireless compliance and negate your
authority to operate the product. This
product has demonstrated EMC compliance
under conditions that included the use of
compliant peripheral devices and shielded
cables between system components. It is
important that you use compliant peripheral
devices and shielded cables between system
components to reduce the possibility of
causing interference to radios, televisions, and
other electronic devices.
© 2014 Seal One AG All rights reserved.
Seal One® is a trademark of Seal One AG.
Seal One The Bluetooth® word mark and
logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks
by Seal One Inc. is under license.
Seal One hardware product limited warranty
Seal One warrents to the original purchaser
that the Seal One hardware product shall
be free from defects in material and workmanship for the period of time, identified in
the product package an/or in the user documenation, from the date of purchase. This
information is also available on our website
at www.seal-one.com/support. Except where
prohibited by applicable law, this warranty is
nontransferable and is limited to the original
purchaser. This warranty gives specific legal
rights and may also be have other rights
thatvary under local laws.
Seal One‘s entire liability and exclusive
remedy for any breach os warranty shall be,
at Seal One‘s option, (1) to repair or replace
the hardware, or (2) to refund the price paid,
provided that the hardware is returned to
to the point of purschase or such a place as
Seal One may direct with a copy of the sales
receipt or dated itemized receipt. Shipping
and handling charges may apply, except
where prohibited by applicable law. Any
replacement hardware will be warrented for
the remainder of the original warranty period
or thirty (30) days, whichever is longer or
for any additional period of time that may be
applicable in the specific jurisdiction.
The warranty does not cover problems or
damages from: (1) accident, abuse, misapplication, or any unahorized repair, modification
or disassembly (2) improper operation or
maintenance, usage not in accordance with
product instructions or connection to improper volatge supply. Seal One AG disclaims any
liability for damage which may arise due to
improper use. Seal One® 8300pro must not be
opened. Any changes to the device are strictly
prohibited and will void the warranty.
Limitation of liability
SEAL ONE SHALL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDETIAL OR CONSEQUETIAL DAMAGES
WHATSOEVER, INCLUDING BUT NIT LIMITED TO LOSS OF PROFIT; REVENUE OR
DATA (WHETHER DIRECT OR INDIRECT)
OR COMMERCIAL LOSS FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY
ON THE PRODUCT EVEN IF SEAL ONE
HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES:
Duration of implied warranties
EXCEPT TO THE EXTENT PROHOBITED
BY APPLICABLE LAW; ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE HARDWARE PRODUCT
IS LIMITED IN DURATION TO THE
DURATION OF THE APPLICABLE LIMITED
WARRANTY PERIOD FOR THE PRODUCT.
Additional rights. Some states do not allow
limitations on how long an implied warranty
lasts, or allow the exclusion or limitation
of icidental or consequential damages, so
the above limitations or exclusion may not
apply. This warranty gives specific legal rights,
and maybe there also other rights that vary
from State to State or by country or other
jurisdiction.
National Satutory Rights
Consumers have legal rights under applicable
national legislation governing the sale of
consumer goods. Such rights are not affected
by the warranties in this Limited Warranty.
No other warranties
No Seal One dealer, agent, or employee is authorized to make any modification, ectension,
or addition to this warranty.
Warranty Periods
Please note, that the European Union, any
warranty period less than two years shall be
increased to two years.
Seal One address
Seal One AG, Berliner Str. 44, 60311 Frankfurt
am Main, Germany.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51
Create Date                     : 2014:09:30 21:34:26+02:00
Metadata Date                   : 2014:09:30 21:34:27+02:00
Modify Date                     : 2014:09:30 21:34:27+02:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.3)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 7343 bytes, use -b option to extract), (Binary data 5627 bytes, use -b option to extract)
Instance ID                     : uuid:29494152-6434-7043-b5aa-8c3aaa36fd9e
Document ID                     : xmp.did:FC7F1174072068118083D4E00D3E7B81
Original Document ID            : xmp.did:FC675153B5B5E311AFD7A4E816DD76AF
Rendition Class                 : proof:pdf
Version ID                      : 1
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:FC675153B5B5E311AFD7A4E816DD76AF, xmp.iid:FD675153B5B5E311AFD7A4E816DD76AF, xmp.iid:FE675153B5B5E311AFD7A4E816DD76AF, xmp.iid:FF675153B5B5E311AFD7A4E816DD76AF, xmp.iid:1401241C5CB6E311B289C8FFB1429E8D, xmp.iid:1501241C5CB6E311B289C8FFB1429E8D, xmp.iid:1601241C5CB6E311B289C8FFB1429E8D, xmp.iid:1801241C5CB6E311B289C8FFB1429E8D, xmp.iid:1A01241C5CB6E311B289C8FFB1429E8D, xmp.iid:C3E6D10A85B6E311B289C8FFB1429E8D, xmp.iid:C7E6D10A85B6E311B289C8FFB1429E8D, xmp.iid:5F11F4DCCCB8E311A228A9C603BA8510, xmp.iid:ADB80EE1B2B9E311B63BD2811C7AFB3B, xmp.iid:A49181C942BAE31189488A538B228482, xmp.iid:B43FF48D43BAE311A92AB7F856068C41, xmp.iid:332D35BD46BAE311B1BBDE6777FE4736, xmp.iid:850067CD60BAE311AA2C811FD0794BF6, xmp.iid:97AAD5E082BAE311AA2C811FD0794BF6, xmp.iid:EBF05710DABFE3118250E4602C9FA8CE, xmp.iid:EEF05710DABFE3118250E4602C9FA8CE, xmp.iid:6B1E15C896C1E3119E3FD1088857F380, xmp.iid:88F40855B5C4E311991F8457467E8EAE, xmp.iid:DF70BD75C6CBE311991CF433E6281197, xmp.iid:DE9953164B13E4119DDFB81D042FCCAE, xmp.iid:10B2507B3E29E411B39E9F0998BF56F0, xmp.iid:D6AEF732C939E411BF79EE4021B42381, xmp.iid:3B7503DE823EE411BD7DA2D3D65BA7EC, xmp.iid:33639B91AB44E411A1A7BF45A2E20F6E, xmp.iid:F24D6905EE47E411AE14AC88EDBD19B0, xmp.iid:F34D6905EE47E411AE14AC88EDBD19B0, xmp.iid:F77F1174072068118083D4E00D3E7B81, xmp.iid:FC7F1174072068118083D4E00D3E7B81, xmp.iid:FE7F1174072068118083D4E00D3E7B81, xmp.iid:00801174072068118083D4E00D3E7B81, xmp.iid:F983837D6E2068118083D4E00D3E7B81, xmp.iid:FE83837D6E2068118083D4E00D3E7B81
History When                    : 2014:03:27 14:48:33+01:00, 2014:03:27 14:57:15+01:00, 2014:03:27 14:57:15+01:00, 2014:03:27 18:16:07+01:00, 2014:03:28 10:34:07+01:00, 2014:03:28 11:06:27+01:00, 2014:03:28 12:00:38+01:00, 2014:03:28 14:29:38+01:00, 2014:03:28 14:35:43+01:00, 2014:03:28 15:27:07+01:00, 2014:03:28 15:58:01+01:00, 2014:03:31 14:06:17+02:00, 2014:04:01 17:33:03+02:00, 2014:04:02 10:42:56+02:00, 2014:04:02 10:48:25+02:00, 2014:04:02 11:11:13+02:00, 2014:04:02 14:25:59+02:00, 2014:04:02 18:21:48+02:00, 2014:04:09 13:28:24+02:00, 2014:04:10 17:45:37+02:00, 2014:04:11 18:31:49+02:00, 2014:04:15 17:48:04+02:00, 2014:04:24 17:38:25+02:00, 2014:07:24 17:56:34+02:00, 2014:08:21 16:21:46+02:00, 2014:09:11 17:35:03+02:00, 2014:09:17 17:54:12+02:00, 2014:09:25 18:33:14+02:00, 2014:09:29 17:33:54+02:00, 2014:09:29 17:57:09+02:00, 2014:09:29 18:27:54+02:00, 2014:09:29 18:27:54+02:00, 2014:09:30 11:58:46+02:00, 2014:09:30 19:21:20+02:00, 2014:09:30 21:24:47+02:00, 2014:09:30 21:33:52+02:00
History Software Agent          : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Derived From Instance ID        : xmp.iid:F77F1174072068118083D4E00D3E7B81
Derived From Document ID        : xmp.did:FC675153B5B5E311AFD7A4E816DD76AF
Derived From Original Document ID: xmp.did:FC675153B5B5E311AFD7A4E816DD76AF
Derived From Rendition Class    : default
Doc Change Count                : 13547
Format                          : application/pdf
Title                           : Produktinfo-8300pro_eng.indd
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
GTS PDFX Version                : PDF/X-3:2002
GTS PDFX Conformance            : PDF/X-3:2002
Page Count                      : 2
Creator                         : Adobe InDesign CS5.5 (7.5.3)

EXIF Metadata provided by EXIF.tools