SL 155 AIS T1 T3 Installation Manual Rev3

2017-07-06

• Introduction
• Operating Principle
• Technology
• Specifications
• Product Components
• PC Configuration Tool
• Programming the Lantern
• Info Tab
• Operation Mode Tab
• Flash Code
• Intensity
• Sensors
• AIS Report
• IR Programmer
  • Sealite IR Programmer / Universal Remote Compatibility
• Test Mode / Configure
• Normal Operation
• Read
  • Example Key Sequences:
• IR Programmer Functions
• SL-155 Series Lantern
  • Power Consumption
  • Power Basics
• Thermal Management
• SL-155-5D
  • Please contact your Sealite representative if you have any questions regarding the installation and service of the lantern.
  • Option 1: Installation of Lantern to Mains Power
  • Option 2: Installation of Lantern to Solar Powered System
    • 1. Unpacking Instructions
    • 2. Initial Inspection
    • 3. Installation
    • 3.1 Installing the Post
    • 3.3 Installing the Battery Box
    • Figure 3. Battery and Battery Box
  • COM Port selection
  • Read / Write configuration
  • Configuration tabs
  • BIIT failure actions
  • Vessel proximity alert
  • AtoN Details
    • Sealite Pty Ltd will repair or replace your LED light in the event of electronic failure for a period of up to three years from the date of purchase, as per the terms & conditions below.
• Lantern Data
• Let’s Try a practical Example
• Power Supply Design Considerations
• Lantern Testing
• Lantern Installation
• GPS Synchronisation
• Lantern Testing
• Lantern Installation
• Optional GPS Synchronisation
• AIS System
  • Type 1 AIS AtoN
  • Type 3 AIS AtoN
  • GNSS systems
• Supported AIS Messages
• Installation
  • Description of the proAtoN Programming Software Tool
  • Installing the proAtoN PC Software Tool
• Application layout
• Transceiver configuration
  • Configuration of ‘Real’ AtoN parameters
• Message schedule configuration
• Adding additional messages to the schedule
• FATDMA Schedule configuration
• RATDMA Schedule configuration
• Virtual AtoN configuration
• Virtual / Synthetic AtoN
• Virtual / Synthetic AtoN Details
• Virtual AtoN schedule
• Status input configuration tab
• Alert messages
• Off position alert
• SART Relay Mode
• Transceiver diagnostics
  • GNSS tab
• Serial Data tab
  • Diagnostics tab
• Report generation
• Reported messages
• Active alarms
• Maintenance & Servicing
• Trouble Shooting
• Appendix – Flash Codes
• Notes
• Warranty Conditions
• Sealite LED Light Warranty V2.2
• Limitation of Liability
• Limited to Original Purchaser
• Miscellaneous
• Warrantor