Sears 200 71488 Users Manual
DIEHARD Battery charger Manual L0807707 DIEHARD Battery charger Owner's Manual, DIEHARD Battery charger installation guides
200.71488 L0807707
200.71488 to the manual ca2c7543-1109-4ce1-868b-e58611b2b118
2015-02-05
: Sears Sears-200-71488-Users-Manual-398711 sears-200-71488-users-manual-398711 sears pdf
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
OWNER'S MANUAL DieHard, Portable Power 1150 Jump Starter/DC Power Source Air Compressor, Inflator and AC Power Model No. 200.71488 CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 00-99-000525/1205 bIL*_ :] I :l[o) =[e[o]_bll:l_11[-1 Warranty ........................................................................................................................ 2 Important Safety Instructions ........................................................................................ 3 Portable Power 1150 Product Features ........................................................................ 3 Operating Instructions ................................................................................................... 4 Jump-starting A Vehicle Engine ..................................................................... Powering a 12V DC Device ............................................................................ 4 4 12V DC Electrical Device Example Run-Time Chart ...................................... Using the Air Compressor .............................................................................. 5 5 Using the Inflator ............................................................................................. Using the Deflator ........................................................................................... Using the Built-in Light .................................................................................... 5 6 6 Before Using the Inverter ................................................................................ Using the Inverter ........................................................................................... 6 7 Powering a 110V AC Device ........................................................................... 110V AC Electrical Device Example Run-Time Chart .................................... 7 8 Digital Display Functions ................................................................................ Charging the Internal Battery .......................................................................... 8 8 Storage and Maintenance ............................................................................................. Replacing the Built-In Light ............................................................................. Specifications .............................................................................................................. 9 9 10 Replacement 10 Parts ...................................................................................................... Please read this Owner's Manual before using your Portable Power 1150. For information about troubleshooting, call toll-free from anywhere in the U.S.A. 7 am to 4:30 pm Central Time Monday through Friday. 1-800-SEARS-64 (1-800-732-7764). kt,t/±l i_1 i_±! _/ Ik'd One-Year Full Warranty on DieHard Portable Power 1150 (excluding bulbs) If this Portable Power 1150 fails due to a defect in material or workmanship within one year from the date of purchase, RETURN IT TO ANY SEARS STORE or OTHER DIEHARD OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT. This warranty does not include the light bulbs, which are expendable parts. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179 hVAI ;[o] Z_IIV;1_| | _-"T;1 d =/15"dII_[._ | zZi[o,)d [o] _[.'] SAVE THESE INSTRUCTIONS CHARGE THE 1150 BEFORE THE FIRST USE AND AFTER EVERY USE THEREAFTER. USE IN A WELL-VENTILATED SPACE. CONTAINS SEALED NON-SPILLABLE LEAD-ACID MUST BE DISPOSED OF PROPERLY. WARNING: POSSIBLE MAY CAUSE SEVERE CHILDREN. BATTERY. EXPLOSION HAZARD, CONTACT WITH BATTERY ACID BURNS AND BLINDNESS. KEEP OUT OF REACH OF WARNING: Handling the cord on this product or cords associated with accessories sold with this product, may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. 1. Light/Display switch. This switch turns on the light or the internal battery status digital display. 2. Inverter/Compressor switch. This switch turns the inverter and air compressor 3. on and off. 4. Digital Displayindicates internal and vehicle's battery percentage of charge and displays a code when improperly connected to battery. Plastic lens cover 5. Two, light bulbs 6. Two, 12V DC power outlets 7. Two, 110VAC outlets 8. Air compressor 9. Air compressor hose 10. Air compressor accessory 11. Air compressor ball inflation 12. 13. Two, air compressor miscellaneous inflation adapters ON/OFF inflator/deflator switch household power gauge 14. High-flow 15. Inflator/deflator 16. 17. High-flow deflator outlet Inflator/deflator hose bag adapter inflator outlet hose end adapter 18. Three, Inflator/deflator adapters hose device 19. Male-to-male 20. Two, cables with clamps 12V charging connector [.]__;l-'_lil _[_ WARNING: Failure may cause damage entire instruction Always shield eyes safety glasses. to follow instructions or an explosion. Read manual before use. during use and wear JUMP-STARTING A VEHICLE ENGINE Use in well-ventilated area. Keep hands, hair, clothing and jewelry clear of fan blades, belts, pulleys and other parts that may cause injury. 1. Turn ignition off before making cable connections. 2. Rest the 1150 on a flat, stable surface near the vehicle battery and away from moving engine parts. 3. Connect the red clamp to the positive terminal of the vehicle battery. 4. Connect the black clamp to an unpainted and unmoving part of the vehicle chassis or engine block. CAUTION: If you have connected the clamps backwards, an audible alarm will sound. Reverse the connections and the audible alarm will stop. NOTE: If after following steps 1-4 the display remains blank, check for a good connection on both jaws of the clamps. If the display still doesn't light, hold down the display switch for 5 seconds. If the display doesn't blink, the external battery voltage is too low to be detected by the 1150. This means your battery power is less than a half-a-volt (or 0.5V) and needs to be charged for the 1150 to jump start it. 5. Digital Display: The charge percentage of the vehicle's battery will be displayed for 5 seconds. The display will blink to indicate proper connection and will then show the charge percentage of both batteries combined (1150 and vehicle). If the combined percentage is below 35%, the 1150 needs charging. If the combined percentage is above 35%, proceed to #6. II_[-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 11 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Sat Aug 16 04:14:34 2008 Author : Title : Subject :EXIF Metadata provided by EXIF.tools