Sears Expanse 500 831 297432 Users Manual
831297432 831297432 LIFESTYLER LIFESTYLER EXPANSE 500 - Manuals and Guides 99020121 View the owners manual for your LIFESTYLER LIFESTYLER EXPANSE 500 #831297432. Home:Fitness Equipment Parts:Lifestyler Parts:Lifestyler LIFESTYLER EXPANSE 500 Manual
LIFESTYLER Treadmill Manual 99020121 LIFESTYLER Treadmill Owner's Manual, LIFESTYLER Treadmill installation guides
EXPANSE 500 831.297432 99020121
831.297432 to the manual 8ae72aa4-7f67-4ef3-ac74-91ecbd586e5f
2015-02-05
: Sears Sears-Expanse-500-831-297432-Users-Manual-399536 sears-expanse-500-831-297432-users-manual-399536 sears pdf
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
EX PANSE SEARS 500 Model No. 831.297432 Serial No. The serial number can be found in the locationshown below. Write the serial number in the space above. Serial Number Decal Ex EC_ i[€,lll _- F_ _ U :Bit I P I S M in I_ I_ Ro| N T _. !-1 HF---LPLINE! _Y:-.800- 736- 6879 _CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual in a safe place for future reference. OWNER'S MANUAL SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 I FULL 90 DAY WARRANTY For 90 days from the date of purchase, if failure occurs due to defect in matedal or workmanship in this SEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the United States and SEARS will repair or replace the TREADMILL EXERCISER, free of charge. This warranty does not apply when the TREADMILL EXERCISER is used commemially or for rental purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. SEARS, ROEBUCK AND CO., DEPT. 817WA_ HOFFMAN ESTATES, IL 60179 2 EXPANSE 5 O O M TABLE OF CONTENTS FULL 90 DAY WARRANTY ................................................................... 2 IMPORTANT PRECAUTIONS ................................................................. BEFORE YOU BEGIN ....................................................................... 4 5 ASSEMBLY ............................................................................... OPERATION AND ADJUSTMENT ............................................................. 6 7 TROUBLE-SHOOTING AND STORAGE ........................................................ CONDITIONING GUIDELINES ............................................................ PART LIST ............................................................................... EXPLODED DRAWING ..................................................................... ORDERING REPLACEMENT PARTS .................................................. _k WA RNING: 10 _..12 14 15 Back Cover Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. SEARS assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 3 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock or injury to persons, read the following Important precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately Informed of all warnings and precautions. . Use the treadmill only as described in this manual. 2. . . . Q 7. . 9. Place the treadmill on a level surface, with eight feet of clearance behind it. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water. Do not operate the treadmill where aerosol products are used or where oxygen is being administered. Keep small children and pets away from the treadmill at all times. The treadmill should be used only by persons weighing 250 pounds or less. Never allow more than one person on the treadmill at a time. When connecting the power cord (see HOW TO PLUG IN THE POWER CORD on page 7), plug the power cord into a surge protector (not included) and plug the surge protector into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. 10. Use only a UL-IIsted surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. Do not use an extension cord. 12. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 5 If the treadmill is not working properly.) 13. Wear appropriate exercise attire when using the treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals. 14. Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill. 15. The treadmill is capable of high speeds. Adjust the speed In small increments to avoid sudden jumps in speed. 16. To reduce the possibility of the treadmill overheating, do not operate the treadmill continuously for longer than I hour. 17. Never leave the treadmill unattended while it is running. Always remove the key when the treadmill is not in use. 18. Never insert any object into any opening. 19. Inspect and tighten all parts on the treadmill every three months. 20. Always unplug the power cord before performing the maintenance and adjustment procedures described in this manual. Servicing other than the procedures in this manual should be performed by an authorized service representative only. 11. Keep the power cord and the surge protector away from heated surfaces. SAVE THESE INSTRUCTIONS 4 BEFORE YOU BEGIN Thank you for selecting the SEARS LIFESTYLEFP EXPANSE 500 treadmill. The EXPANSE 500 treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and pdvacy of your home. For your benefit, read this manual carefully before using the treadmill. If you have additional questions, please call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is 831.297432. The serial number can be found on a decal ,_ttached to the treadmill (see the front cover of this manual for the location). Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled. FRONT Walking Belt Foot Rails Padded Walking Platform Power Cord BACK RIGHT SIDE Rear Roller Adjustment Bolts Note: The incline leg pad may mark some types of linoleum. Mild household cleaning agents will remove any marks. 5 ASSEMBLY Set the treadmill in a cleared area and remove all packing matedals. Do not dispose of the packing materials until assembly is completed. THE FOLLOWING TOOLS and your own adjustable ARE REQUIRED wrench _ FOR ASSEMBLY: The Included 7/32" allen wrench . 1. Raise the Right Handrail (12) to a vertical position. Align the hole in the lower end of the Right Handrail with the h01e in the side of the Frame (36). Insert one of the three 3/8" x 2" Bolts (28) into th e Right Handrail, and tighten the Bolt into the Frame. Tighten the Bolt that is already in the Right Handrail. Tighten Press the Right Handrail Cap (27) onto the lower end of the Right Handrail (12). Note: It may be necessary to push the 12" Cable Loom (10) into the Right Handrail. 2. Using the 7/32" Allen Wrench (9), loosen the Handrail Bolt that is under the Console (6). Rotate the Console to the position shown. 2 1 38 See the inset drawing. If there is a cable tie through the Handrail (1) and Handrail Cage Nut (38), cut it. Make sure that the Cage Nut is inserted into the hole in the underside of the Handrail. Insert the upper end of the Left Handrail (1) into the left side of the Console (6). Insert a Handrail Bolt (2) into the bottom of the Console and the Left Handrail (1). Finger tighten the Handrail Bolt. 3. Align the holes in the lower end of the Left Handrail (1) with the holes in the treadmill Frame (36). Tighten a 318" x 2" Bolt (28) into each hole. Press the Left Handrail Cap (68) onto the lower end of the Left Handrail (1). See step 2. Using the 7/32" Allen Wrench (9), tighten the two Handrail Bolts (2) under the Console (6). 28 1 36 4. Remove the paper backing from the Wrench Clip (16). Press the Wrench Clip onto the Right Rear Endcap (59) in the indicated location. Press the 3/16" Allen Wrench (58) into the Wrench Clip. Make sure that all parts are tightened before using the treadmill. Note: To protect the floor or carpet from damage, place a mat under the treadmill. _59 16 6 OPERATION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge protector, and plug the surge protector into an appropriate outlet that is properly installed and grounded In accordance with all local codes and ordinances. Your treadmill features a walking belt coated with PERFORMANT LUBE TM, a high-performance lubdcant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD DANGER: improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in drawing I below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge protector to a 2-pole receptacle as shown in drawing 2 if a propedy grounded outlet is not available. The temporary adapter should be used only until a propedy grounded outlet (drawing 1) can be installed by a qualified electddan. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly:grounded. Do not modify the plug provide d with the product---if it will 'not fit the outle t havea 'proper outlet installed by a qualified electrician.' The graen-colorad rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet box Cover Is grounded before using an adapter. Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home's power, Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your tread1 j Grounded Outlet Box mill being damaged, always use a surge protector (not in/ Grounding Pin cluded) with your treadmill. "_unding Surge protectors are sold at most hardware stores and department stores. Use only a ULlisted surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. This product must be grounded, If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the dsk of Treadmill Power Cord-.. Plug 3rounded Outlet __ ,_/Grounded ,1 Outlet Box Adapter ,_ Grounding Pin Plug Surge Protector DIAGRAMOFTHECONSOLE Motivational SPEED Fitness I TIME Monitor DISTANCE CALORIES ON/_ Speed ¢ 0 Key The heart of the treadmill is the innovative console. The console features a key-operated power switch, electronic speed control and four independent displays to provide continuous exercise feedback. Please read these instructions carefully before operating the console. Note: If there is a sheet of protective plastic on the face of the console, peel it off before operating the console. INSTALLING BATTERIES The motivational fitness monitor requires two "AA" battedes (not included); alkaline batteries are recommended. Slide open the battery cover located on the underside of the console. Remove the battery clip from the console. Find the markings inside the battery clip showing which direction the batteries should be turned. Press the battedes into the battery clip. Replace the battery clip in the console and close the battery cover. Underside of Console • dinJ" I Battery ._,J ___J - Cover HOW TO TURN ON THE POWER Stand on the foot rails of the treadmill. Do not stand on the endcaps or they may be damaged. Find the clip attached to the key, and clip it onto your waistband. "'--["' CAUTION: Do not stand on the walk- ing belt when turning on the power. Always wear the clip while operating the treadmill. Insert the key into the power switch. The four displays of the motivational fitness monitor will not appear until the ON/CLEAR button is pressed, or the walking belt begins to move (see CONTROLLING THE SPEED below). Note: If batteries were just installed, the four displays will already appear. CONTROLLING THE SPEED To start the walking belt, first turn the speed control knob to "STOP/RESET." Then, turn the knob slowly clockwise until the walking belt begins to move at slow speed. Do not let your feet touch the walking belt when standing on the foot rails. A, CAUTION: After the knob is turned, there will be a pause before the walking belt begins to move. Adjust the speed slowly until you are familiar with the operation of the treadmill. Carefully step onto the walking belt and begin exercising. Change the speed of the walking belt as desired by turning the speed control knob. To stop the walking belt, turn the knob to "STOP/RESET." MOTIVATIONAL FITNESS MONITOR The four displays of the motivational fitness monitor provide continuous exercise feedback. The displays can be reset by pressing the ON/CLEAR button. The four displays are descdbed below: SPEED--This display shows the current speed of the walking belt, in miles per hour. TIME--This display shows the elapsed time. Note: When the walking belt is stopped, the TIME display will go into a pause mode after a few seconds. DISTANCE--This display shows the total distance that you have walked or run, in miles. CALORIES--This display shows the approximate number of nutritional Calories that you have burned. Note: If the walking belt is stopped and remains stationary for about four minutes, the four displays of the motivational fitness monitor will be reset and will darken, although the power will remain on. The four displays will appear again when the ON/CLEAR button is pressed, or the walking belt is restarted. HOW TO CHANGE THE INCUNE OF THE TREADMILL The incline of the treadmill can be changed by raising or lowering the back end. Before changing the incline, remove the key and unplug the power cord. Place one foot on the incline leg near the sticker, and grasp the.rear roller with beth hands, CAUTION: Do not place your hands under the frame, or they may be pinched. Do not lift on the endcaps or they may be damaged. When the back end of the treadmill is in the lowest position, the incline is about 10%. Raise the back end until it clicks into position..The inclinewill then be about 5%. Raise the back end again until it clicks into position. The inclinewill then be about 3%. To lower the back end, first raise it past the highest position, and then lower it. CAUTION: Before exercising on the treadmill, push slightly on the back of the : treadmill to make sure that the incline leg Is locked in position. TURNING OFF THE POWER To turn off the power, remove the key from the console. Store the key in a secure location. PADDED WALKING PLATFORM The treadmill features a padded walking platform that adds to your comfort as you exercise on the treadmill. 9 TROUBLE,SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-7366879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a propedy grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. (See HOW TO TURN ON THE POWER on page 8.) c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in. Tripped _ I Reset 2. SYMPTOM: THE POWER TURNS OFF DURING USE a. Check the circuit breaker located on the treadmill near the power cord. If the circuit breaker has tripped (see the drawing above), wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in. c. Remove the key from the console. Reinsert the key fully into the console. 3. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3-4 inches off the walking platform. The center of the walking belt should just touch the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened. Rear Roller Adjustment Bolts c. If the walking belt still slows when walked on, please call our toll-free HELPLINE. 4. SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. 10 b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. c. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctlytightened, you should be able to lift each side of the walking belt 3-4 inches off the walking platform. The center of the walking belt should just touch the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat untilthe walking belt is propedy tightened. STORAGE Unplug the power cord when the treadmill is not in use. Remove the left handrail cap and the two bolts from the lower end of the left handrail (see drawing 1). Using the 7132"allen wrench, remove the bolt from the upper end of the left handrail (see drawing 2). Slide the handrail out and lay it on the treadmill. Remove the right handrail cap and the bolt from the lower end of the right handrail. Loosen the other bolt in the handrail (see drawing 3). Lay the right handrail on the treadmill. It is recommended that the treadmill be covered during extended periods of storage. Remove 11 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that proper nutrition and adequate rest are essential for successful results. WARNING: To measure your heart rate, stop exercising and place two fingers on your wrist as shown below. Before beginning this or any exercise program, consult your physician. This Is especially important for individuals over the age of 35 or Individuals with pre-existing health problems. EXERCISE INTENSITY To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. Foreffective aerobic exercise, your heart rate should be maintained at a level between 70% and 85% of your maximum heart rate as you exercise. This is known as your training zone. You can find your training zone in the table below. Training zones are listed for both unconditioned and conditioned persons according to age. AGE UNCONDITIONED TRAINING ZONE (BEATS/MIN) CONDITIONED TRAINING ZONE (BEATS/MIN) 20 138-167 133-162 25 136-166 132-160 30 135-164 130-158 35 134-162 129-156 40 132-161 127-155 45 131-159 125-153 50 129-156 124-150 55 127-155 122-149 60 126-153 121-147 65 125-151 119-145 70 123-150 118-144 75 122-147 117-142 80 120-146 115-140 85 118-144 114-139 During the first few months of your exercise program, keep your heart rate near the low end of your training zone as you exercise. After a few months, your heart rate can be increased gradually until it is near the middle of your training zone as you exercise. 12 Take a six-second heartbeat count, and multiply the result by 10 to find your heart rate. For example, if your six-second heartbeat count is 14, your heart rate is 140 beats per minute. (A six-second count is used because your heart rate will drop rapidly when you stop exercising.) Adjust the intensity of your exercise until your heart rate is at the proper level. WORKOUT GUIDELINES Each workout should consist of three basic parts: a warm-up, 20 to 30 minutes of training zone exercise, and a cool-down. Warming up prepares the body for exercise by increasing circulation, delivering more oxygen to the muscles and raising the body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up. Next, increase the intensity of your exercise to raise your heart rate to your training zone for 20 to 30 minutes. Breathe regularly and deeply as you exercise-never hold your breath. Finish each workout with 5 to 10 minutes of stretching to cool down. Stretching after exercise is very effective for increasing flexibility. To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. The key to success is to make exercise an enjoyable part of your everyday life. SUGGESTED STRETCHES The following stretches can provide a good warm-up or cool-down. Correct form for each stretch is shown in the drawings below. Move slowly as you stretch---never bounce. TOE TOUCH STRETCH Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. HAMSTRING STRETCH Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times for both legs. Stretches: Hamstrings, lower back and groin. CALF/ACHILLES STRETCH With one leg in front of the other, reach forward and place your hands against a wall. Keep your back leg straight and your back foot fiat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times for both legs. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles. QUADRICEPS STRETCH With one hand against a wall for balance, reach back and grasp one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for both legs. Stretches: Quadriceps and hip muscles. INNER THIGH STRETCH Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Quaddceps and hip muscles. 13 PART LIST--Model 14 R0296A Description Key No. Part No. 1 2 4 1 1 1 1 1 1 2 5 1 1 12 1 2 1 1 4 1 1 1 1 3 1 2 1 4 2 14 2 Left Handrail Handrail Bolt Cage Nut Key/Clip Speed Control Knob Console Wire Harness Console Plate 7/32" Allen Wrench 12"Cable Loom Console Screw Right Handrail Pulley Cover Endcap Screw Front Roller/Pulley Adhesive Clip Reed Switch Extension Wire Wire Clip Circuit Breaker Grommet Power Cord Front Roller Adj. Bolt Adjustment Washer Front Right Endcap Motor Nut Right Handrail Cap 3/8" x 2" Bolt Wheel Bolt Small Screw Front Wheel 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 122363 122871 016057 124423 013547 124292 012108 014105 123627 116980 123961 116927 116926 123355 123992 105444 123991 109788 100691 124146 124380 125323 031238 123921 122812 014117 120867 122632 112825 118017 100994 6 2 1 10 1 1 2 1 1 2 4 1 2 Front Wheel Nut/Incline Leg Nut Belt Guide Safety Cover Safety Cover Screw Frame Right Foot Rail Handrail Cage Nut Walking Belt 4" Wire Tie Incline Leg Bolt Incline Leg Spring Motor Pivot Bolt Incline Leg Latch 76 77 78 79" 80 81 # # # # 124100 117992 108080 124151 111467 127733 115868 123898 115868 128018 Key No. Part No. Qty. 1 2 3 4 5 6* 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 123635 122137 111869 119038 110000 124150 123897 123637 045017 103643 013141 123633 123993 013322 124147 016028 118153 118195 054023 109382 124695 124669 112609 014127 123994 105477 123922 013601 117806 120630 123647 32 33 34 35 36 37 38 39 40 41 42 43 44 012056 124318 123628 013162 NSP 124148 111430 124145 016029 124422 124565 107503 123666 Specifications No. 831.297432 are subject to change without notice. Qty. Description 1 1 2 2 1 1 1 4 1 2 2 1 1 1 Controller Plate Controller 8" wire Tie Incline Bolt Motor Lock Bolt Pulley Cover Bracket Motor Swivel Nut Incline Leg Washer Incline Leg Incline Leg Er'tdcap Incline Leg Pad Cable Tie Clip Cable Tie 3/16" Allen Wrench 1 2 1 1 8 Right Rear Endcap Rear Roller Adj. Bolt Left Rear Endcap Rear Roller Platform Screw 1 8 1 1 1 1 1 1 1 1 1 2 1 Padded Walking Platform Endcap U-Nut Left Foot Rail Choke Left Handrail Cap Motor Tension Washer Star Washer Motor Tension Nut Motor Mount Bracket Pulley/Flywheel/Fan Motor Belt Motor Bolt Motor 1 4 1 1 Safety Cover Plug Choke Screw/Plate Screw Motor/Pulley/Flywheel/Fan Potentiometer 1 1 1 1 1 Battery Cover Pot. Wire Extension White 2 Wire Jumper 12" Pot Extension Wire Owner's Manual * Includes all the parts shown in the box. # These are non-illustrated parts. EXPLODED DRAWING--Model No. 831.297432 RO296A 81 8O 11 2 12 13 51 68 22 70 49 39 \ 27 37 14 14 34 31 35 33 3O 29 61 52 16 55 48 54 78 404--_ 15 S£/ARS The model number and serial number of your EXPANSE 500 treadmill are listed on a decal attached to the frame. See the front cover of th s manua to find the location of the decal. Model No. 831.297432 All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service Center. To request service or to order parts by telephone, call the toll-free numbers listed at the left. QUESTIONS? If you find that: • you need help assembling or operating the EXPANSE 500 treadmill • a part is missing When requesting help or service, or ordering parts, please be prepared to provide the following information: • The NAME OF THE PRODUCT (SEARS LIFESTYLEFP EXPANSE 500) • The MODEL NUMBER OF THE PRODUCT (831.297432) • or you need to schedule repair service call our toll-free HELPLINE 1-800-736-6879 • The PART NUMBER OF THE PART (see page 14 of this manual) • The DESCRIPTION OF THE PART (see page 14 of this manual) Monday-Saturday, 7 am-7 pm Central Time (excluding holidays) REPLACEMENT PARTS If parts become worn and need to be replaced, call the following ton-free number 1-800-FON-PART (1-800-366-7278) SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 USA Pa_ No. 128018 F00229AC RO296A Printed in USA © 1996 Sears, RoebLJckand Co.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 16 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Apr 02 11:13:41 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools