Seco Larm Usa Sk 1323 Sdq Users Manual
SK-2323-SPQ to the manual 85239765-27e1-482c-a94f-67583838dbed
2015-02-06
: Seco-Larm-Usa Seco-Larm-Usa-Sk-1323-Sdq-Users-Manual-527280 seco-larm-usa-sk-1323-sdq-users-manual-527280 seco-larm-usa pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Outdoor Stand-Alone Weatherproof Keypads Quick User Programming Guide (SK-2323-SDQ shown) Model Number (SK-1323-SPQ shown) 2 Relay Outputs Backlit Keys Proximity Reader Mullion-Style Keypads SK-2323-SDQ SK-2323-SPQ Sealed-Environment Keypads SK-1323-SDQ SK-1323-SPQ For complete programming instructions, please see page 10 of the User Manual. NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products. ENFORCER Outdoor Stand-Alone Keypads Quick Programming Guide Programming Tips Program new Master Code immediately. Program the Output #1 access mode immediately, or the keypad will only accept user cards. Take note of the keypad status LEDs— o Right LED Green: Standby o Left LED Solid Red/Right LED Solid Orange: Programming Mode o Right LED Flashing Orange: Awaiting code/card entry If unsure of which mode the keypad is in, press until the right LED is green. The keypad is now in the standby mode. Enter the master code twice to return to Programming Mode. For complete programming instructions, see page 10 of the User Manual. Programming the Master Code 1. Enter Programming Mode by entering the Master Code twice. (Default Master Code is 12345) 3 . 2. Enter 3. Enter the new 5-digit Master Code twice. Example: If the desired new Master Code is 54321, enter: 5 4 3 2 1 5 4 3 2 1 4. Exit Programming Mode by pressing . Setting the Output #1 Access Mode* DEFAULT: User card only. To use codes, you MUST set mode to 0 1 or 0 2 . 1. Enter Programming Mode by entering the Master Code twice. 0 . 2. Enter 3. Enter one of the following: 0 0 User card ONLY (DEFAULT) 0 1 Either user card OR user code 0 2 User card AND user code Note: The Output #1 Access Mode must be programmed in order for the SK-2323-SPQ and SK-1323-SPQ to accept user codes. 4. Exit Programming Mode by pressing . *SK-2323-SPQ and SK-1323-SPQ only. 2 SECO-LARM U.S.A., Inc. ENFORCER Outdoor Stand-Alone Keypad Quick Programming Guide Programming Output #1 Each Output #1 user can be programmed to have a user code and a user card.* 1.1 User Code Only 1. Enter Programming Mode by entering the Master Code twice. 2. Enter a user ID number. ( 0 0 0 to 9 9 9 ) 3. If the left LED is red, previous user data exists. Clear it by entering The keypad will beep in confirmation and the left LED will turn green. 4. Enter a new 5-digit user code. 5. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3. 6. Exit Programming Mode by pressing . . 1.2 User Card Only* 1. Enter Programming Mode by entering the Master Code twice. 2. Enter a user ID number. ( 0 0 0 to 9 9 9 ) 3. If the left LED is red, previous user data exists. Clear it by entering The keypad will beep in confirmation and the left LED will turn green. 4. Swipe a new user card. 5. Return to Programming Mode by pressing . 6. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3. 7. Exit Programming Mode by pressing again. . 1.3 User Card and Code* 1. Enter Programming Mode by entering the Master Code twice. 2. Enter a user ID number. ( 0 0 0 to 9 9 9 ) 3. If the left LED is red, previous user data exists. Clear it by entering The keypad will beep in confirmation and the left LED will turn green. 4. Swipe a new user card. 5. Enter a new 5-digit user code. 6. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3. 7. Exit Programming Mode by pressing . . *SK-2323-SPQ and SK-1323-SPQ only. SECO-LARM U.S.A., Inc 3 ENFORCER Outdoor Stand-Alone Keypads Quick Programming Guide Programming Output #2 Each Output #2 user may only have a user code OR a user card programmed. 2.1 Programming an Output #2 User Code 1. Enter Programming Mode by entering the Master Code twice. 4 . 2. Enter 3. Enter a user ID number. ( 0 0 to 0 9 ) 4. If the left LED is red, previous user data exists. Clear it by entering The keypad will beep in confirmation and the left LED will turn green. 5. Enter a new 5-digit user code. 6. To program the next user, repeat from step 3 in section 2.1 or 2.2. 7. Return to Programming Mode by pressing . 8. Exit Programming Mode by pressing again . . 2.2 Programming an Output #2 User Card* 1. Enter Programming Mode by entering the Master Code twice. 4 . 2. Enter 3. Enter a user ID number. ( 0 0 to 0 9 ) 4. If the left LED is red, previous user data exists. Clear it by entering The keypad will beep in confirmation and the left LED will turn green. 5. Swipe a new user card. 6. To program the next user, repeat from step 3 in section 2.1 or 2.2. 7. Return to Programming Mode by pressing . 8. Exit Programming Mode by pressing again. . *SK-2323-SPQ and SK-1323-SPQ only. NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors. Copyright © 2010 SECO-LARM U.S A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM. ® SECO-LARM U.S.A., Inc. 16842 Millikan Avenue, Irvine, CA 92606 Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 4 Website: www.seco-larm.com E-mail: info@seco-larm.com PICCN2 SK-x323-SxQ Addendum_1008.docx SECO-LARM U.S.A., Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2010:12:29 11:51:37-08:00 Create Date : 2010:12:29 11:51:30-08:00 Metadata Date : 2010:12:29 11:51:37-08:00 Format : application/pdf Document ID : uuid:5fc2c840-9686-4b40-a1a7-382062c9f10b Instance ID : uuid:0537a0c8-f034-476c-bc1b-ea104dbbe6af Page Count : 4 Language : en-USEXIF Metadata provided by EXIF.tools