SecuEasy Electronic ND101D Smart IP Camera User Manual
Shenzhen SecuEasy Electronic Co., Ltd. Smart IP Camera
Contents
- 1. User manual
- 2. User Manual
User manual
CloudCam User Guide
CloudCam User Guide
1. Package
1.1 List
Item
Smart IP Camera
Power Adapter
Fixed Bracket and Screw
Number
One
Cable
One
One
One
1.2 LED/Reset
WiFi status:
Orange Led:ON－WiFi Connect successfully
OFF－WiFi not connected
System status
Green Led:ON－Power on
OFF－Power off
Press reset(>1s) to default setting, Default password: admin.
Camera
Power
TF/SD card slot
Cable
connecting
1.3 Fix the CloudCam
1) Screw off the circular shaft on the bracket and life one end of bracket,
2) Install the bracket and tighten the circular shaft,use the screw to fix it,
3) Connect the circular shaft and the camera,tighten it clockwise.
2. User guide
2.1 Summary
CloudCam is DHCP client device,need your router enable DHCP service.
Step 1.CloudCam connect to the power adapter and power on,
Step 2.Green Led is on,WiFi AP mode，if the Green Led is off，
please press the Reset to default setting,
Step 3.Download CloudCamLive APP，and add your camera by local
network or QR code scanning to add your camera,
Step 4.Set parameter .
2.2 Install App
Download CloudCamLive APP
Android APK IOS App
Google Play: Search CloudCamLive
or scan the qrcode
App Store: CloudCamLive or
scan the qrcode
CloudCamera Router
CloudCamera Router
2.3 Add/Setup Cloud Camera
Two methods to setup your camera:
1.Local Network，search in your local network or scan the QRCode
to add your camera,
2.Manual，manual input your camera’s UID, name and password .
2.4 Local Network/Manual
Search in local network or Scan the QRCode
Step 1.Open CloudCamLive APP,Clieck and select the
“Local Network”,
Antenna
Step 2. Search in your local network or scan the QRCode
in the camera’s back,
Step 3.Edit camera，Input the name and password（Default: admin）
Click“Save”to save camera’s info.
Manual input：Refer to the Step 4，manual type 20bit UID and
password to add your camera.
Step 4 Set WiFi parameter，Click“ ”to enter the camera’s
parameter setting page, if smartphone is connect to the camera,
Clieck WiF Setting to set your wifi parameter to the camera.
.
2.5. Live viewing
Click the camera list(online-green name)
2.6 Modify password
Select“Camera passwd”, input old password, new password and
confirm password and click the Save button：
2.7 Others
Video：quality/mirror/flip,
Motion：motion sense and notify,
Env：50/60HZ,
Record：motion /all /no record，Format TF,
Delete camera.
snapshot、record listen speaker、 、
4. FAQ
The picture is for reference only, the product color, sizi, screen
and refer to the actual product.
FAQ
No power
No LED is light
No live view
No frames
Reason
Power apapter is not
connect or jack is loose
a. WIFI router is not
connected to internet
b. Mobile phone is not
connected to internet
Solution
Make sure
power supply
Make sure your
WiFi/3G/4G network
is connect to the
internet
3. Computer application user guide
3.1 Open the P2PCamWin on computer
3.2 Click the add botton 3.3 Then search
3.4 Double click the device ID, then input the
password to add it
3.5 Save it, then can back to see live view
CloudCam is DHCP client device,need your router enable DHCP service.
CloudCam
Model:SE-ND101D
User:admin
Password:admin
UID:XXXXXXXXXXXXXXXXXXXX
CloudCam
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.