SecuEasy Electronic ND101D Smart IP Camera User Manual

Shenzhen SecuEasy Electronic Co., Ltd. Smart IP Camera

Contents

User Manual

2. User guide
2.1 Summary
CloudCam is DHCP client device,need your router enable DHCP service.
Step 1.CloudCam connect to the power adapter and power on,
Step 2.Connect the CloudCam to the Router with the network cable,
Orange Led on,connect network successfully.
Step 3.Download CloudCamLive APP，and add your camera by local
network or QR code scanning to add your camera,
Step 4.Set parameter .
2.2 Install App
Download CloudCamLive APP
Android APK IOS App
Google Play: Search CloudCamLive
or scan the qrcode
App Store: CloudCamLive or
scan the qrcode
CloudCamera Router
CloudCam User Guide
CloudCam User Guide
1. Package
1.1 List
Item
Smart IP Camera
Power Adapter
Fixed Bracket and Screw
Number
One
Cable
One
One
One
1.2 LED/Reset
WiFi status:
Orange Led:ON－WiFi Connect successfully
OFF－WiFi not connected
System status
Green Led:ON－Power on
OFF－Power off
Press reset(>5s) to default setting, Default password: admin.
Camera
Power
TF/SD card slot
Cable
connecting
1.3 Fix the CloudCam
1) Screw off the circular shaft on the bracket and life one end of bracket,
2) Install the bracket and tighten the circular shaft,use the screw to fix it,
3) Connect the circular shaft and the camera,tighten it clockwise.
Antenna
Step 2. Search in your local network or scan the QRCode
in the camera’s back,
Step 3.Edit camera，Input the name and password（Default: admin）
Click“Save”to save camera’s info.
Manual input：Refer to the Step 4，manual type 20bit UID and
password to add your camera.
Step 4 Set WiFi parameter，Click“ ”to enter the camera’s
parameter setting page, if smartphone is connect to the camera,
Clieck WiF Setting to set your wifi parameter to the camera.
.
CloudCam
Model:SE-ND101D
Password:admin
UID:XXXXXXXXXXXXXXXXXXXX
User:admin
CloudCam
CloudCamera Router
2.3 Add/Setup Cloud Camera
Two methods to setup your camera:
1.Local Network，search in your local network or scan the QRCode
to add your camera,
2.Manual，manual input your camera’s UID, name and password .
2.4 Local Network/Manual
Search in local network or Scan the QRCode
Step 1.Open CloudCamLive APP,Clieck and select the
“Local Network”,
4. FAQ
The picture is for reference only, the product color, sizi, screen
and refer to the actual product.
FAQ
No power
No LED is light
No live view
No frames
Reason
Power apapter is not
connect or jack is loose
a. WIFI router is not
connected to internet
b. Mobile phone is not
connected to internet
Solution
Make sure
power supply
Make sure your
WiFi/3G/4G network
is connect to the
internet
3.2 Click the add botton 3.3 Then search
3.4 Double click the device ID, then input the
password to add it
3.5 Save it, then can back to see live view
CloudCam is DHCP client device,need your router enable DHCP service.
2.5. Live viewing
Click the camera list(online-green name)
2.6 Modify password
Select“Camera passwd”, input old password, new password and
confirm password and click the Save button：
2.7 Others
Video：quality/mirror/flip,
Motion：motion sense and notify,
Env：50/60HZ,
Record：motion/all/no record，Format TF,
Delete camera.
snapshot、record listen speaker、 、
3. Computer application user guide
3.1 Open the P2PCamWin on computer
Features:
□The product name: Smart IP Camera
□1 Megapixel IP camera with Plug and Play function
□10 infrared LED, 10 m distance
□Support 3 independent coding stream(local, network, mobile)
Specifications:
Model No. SE-ND101D
Trade Mark POWER FORCE
Image Sensor 1/4” Progressive Scan CMOS Sensor
Display Resolution 720P(1280x720)/VGA(640x480)
Lens f=3.6mm,F=2.4,Support IRCUT
Interface
One 10/100Mbps RJ45
WI-FI Support
Micro SD Interface
Power Interface
Reset Button
Built-in Microphone
10 infrared LED, 10 m distance
Pan/Tilt Horizontal: 355°
Vertical:90°
Dimension 121*105*125mm
Power Input 5V DC, <5W
Wireless Speed IEEE802.11b/g/n 150Mbps
Transmission frequency Range 2.412 GHz--2.462 GHz
Protocols & Standards TCP/IP, DHCP, ARP, ICMP, FTP, SMTP
DDNS, NTP, UPnP, RTSP, RTP, HTTP, TCP,UDP/IP,P2P
Work Pattern Infrastructure, Ad-Hoc
Working Current 95~140mA
Security WPA/WPA2-PSK,WPA-/WPA2-AES,64/128-bit WEP/WPS
Distance Outdoor:50m, indoor:15m（depending on surroundings)
Image Compression H.264/MPEG/ MJPEG
Maximal Frame Rate 30fps
Code rate 32kbps ~ 4Mbps
Account permissions Three Level
Motion Detection Support Four area motion detection
Manage Software Windows website platform,support Apple iOS, Android)
Audio Two-way audio
Audio Compression: APDCM,Speex
TX power (transmission power)
< 0.02W@11n, < 0.064W@11b, < 0.025W@11g
B means the work in the WLAN standard in 2.4GHz frequency band, the maximum theoretical bandwidth of up to
11Mbps; G means the WLAN standard in the 2.4GHz frequency band, the maximum theoretical bandwidth of up to
54Mbps; n means the WLAN standard in the 5GHz or 2.4GHz frequency band, the maximum theoretical bandwidth of up
to 600mbps. This depends on the user's access to the Internet terminal equipment support which mode.
Frequency stability 11Mbps: -86dBm@8%; 54Mbps:-73dBm@10%; 130Mbps: -66dBm@10%
Modulation type OFDM/DBPSK/DQPSK/CCK
PC Requirements
CPU 2.0GHz or above (suggested 3.0GHz)
Memory Size 256MB or above (suggested 1.0GHz)
Display Card 64M or above
Microsoft Windows 7,Vista,XP
Browser:IE8.0,Firefox,Safari,Goolge Chrome,other standard browsers
Temperature Operate Temperatures：-20℃ ~ 50℃
Humidity Operating Humidity：10% ~ 95%
Reception Sensibility 11Mbps: -86dBm@8%; 54Mbps:-73dBm@10%; 130Mbps: -66dBm@10%
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Navigation menu