SecuEasy Electronic ND101D Smart IP Camera User Manual

Shenzhen SecuEasy Electronic Co., Ltd. Smart IP Camera

Contents

User Manual

Download: SecuEasy Electronic ND101D Smart IP Camera User Manual
Mirror Download [FCC.gov]SecuEasy Electronic ND101D Smart IP Camera User Manual
Document ID2837368
Application IDqPYAZdxO4h837+V1NYSOGA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize149.2kB (1864978 bits)
Date Submitted2015-12-10 00:00:00
Date Available2015-12-08 00:00:00
Creation Date2015-11-06 10:30:29
Producing SoftwareCorel PDF Engine Version 15.0.0.486
Document Lastmod2015-12-10 11:04:37
Document TitleUser Manual
Document CreatorCorelDRAW X5
Document Author: Administrator

CloudCam User Guide
CloudCam User Guide
1. Package
1.1 List
Item
Number
Smart IP Camera
One
Power Adapter
One
Fixed Bracket and Screw
One
Cable
One
2. User guide
2.1 Summar y
CloudCam is DHCP client device,need your router enable DHCP ser vice.
1.2 LED/Reset
Antenna
Step 1.CloudCam connect to the power adapter and power on,
Step 2.Connect the CloudCam to the Router with the network cable,
Orange Led on,connect network successfully.
Camera
Cable
connecting
Power
TF/SD card slot
WiFi status:
Orange Led:ON-WiFi Connect successfully
OFF-WiFi not connected
System status
Green Led:ON-Power on
OFF-Power off
Press reset(>5s) to default setting, Default password: admin.
1.3 Fix the CloudCam
1) Screw off the circular shaft on the bracket and life one end of bracket,
2) Install the bracket and tighten the circular shaft,use the screw to fix it,
3) Connect the circular shaft and the camera,tighten it clockwise.
CloudCamera
Router
Step 3.Download CloudCamLive APP,and add your camera by local
network or QR code scanning to add your camera,
Step 4.Set parameter .
2.2 Install App
Download CloudCamLive APP
IOS App
Android APK
Google Play: Search CloudCamLive
or scan the qrcode
App Store: CloudCamLive or
scan the qrcode
Step 2. Search in your local network or scan the QRCode
in the camera’s back,
2.3 Add/Setup Cloud Camera
Two methods to setup your camera:
1.Local Network,search in your local network or scan the QRCode
to add your camera,
2.Manual,manual input your camera’s UID, name and password .
CloudCam
CloudCam
Model:SE-ND101D
2.4 Local Network/Manual
User:admin
Password:admin
UID:XXXXXXXXXXXXXXXXXXXX
Step 3.Edit camera,Input the name and password(Default: admin)
Click“Save”to save camera’s info.
CloudCamera
Router
Search in local network or Scan the QRCode
Step 1.Open CloudCamLive APP,Clieck
“Local Network”,
and select the
Manual input:Refer to the Step 4,manual type 20bit UID and
password to add your camera.
Step 4 . Set WiFi parameter,Click“
”to enter the camera’s
parameter setting page, if smartphone is connect to the camera,
Clieck WiF Setting to set your wifi parameter to the camera.
2.5. Live viewing
3.2 Click the add botton
3.3 Then search
Click the camera list(online-green name)
3.4 Double click the device ID, then input the
password to add it
snapshot、record、listen、speaker
2.6 Modify password
Select“Camera passwd”, input old password, new password and
confirm password and click the Save button:
3.5 Save it, then can back to see live view
2.7 Others
Video:quality/mirror/flip,
Motion:motion sense and notify,
Env:50/60HZ,
Record:motion /all /no record,Format TF,
Delete camera.
3. Computer application user guide
3.1 Open the P2PCamWin on computer
4. FAQ
FAQ
Reason
Solution
No power
No LED is light
Power apapter is not
connect or jack is loose
Make sure
power supply
No live view
No frames
a. WIFI router is not
connected to internet
b. Mobile phone is not
connected to internet
Make sure your
WiFi/3G/4G network
is connect to the
internet
The picture is for reference only, the product color, sizi, screen
and refer to the actual product.
CloudCam is DHCP client device,need your router enable DHCP ser vice.
Features:
□
The product name: Smart IP Camera
□
1 Megapixel IP camera with Plug and Play function
□
10 infrared LED, 10 m distance
□
Support 3 independent coding stream(local, network, mobile)
Specifications:
Model No.
SE-ND101D
Trade Mark
POWER FORCE
Image Sensor
1/4” Progressive Scan CMOS Sensor
Display Resolution
720P(1280x720)/VGA(640x480)
Lens
f=3.6mm,F=2.4,Support IRCUT
Interface
One 10/100Mbps RJ45
WI-FI Support
Micro SD Interface
Power Interface
Reset Button
Built-in Microphone
10 infrared LED, 10 m distance
Pan/Tilt
Horizontal: 355°
Vertical:90°
Dimension
121*105*125mm
Power Input
5V DC, <5W
Wireless Speed
IEEE802.11b/g/n 150Mbps
Transmission frequency Range
2.412 GHz--2.462 GHz
Protocols & Standards
TCP/IP, DHCP, ARP, ICMP, FTP, SMTP
DDNS, NTP, UPnP, RTSP, RTP, HTTP, TCP,UDP/IP,P2P
Work Pattern
Infrastructure, Ad-Hoc
Working Current
95~140mA
Security
WPA/WPA2-PSK,WPA-/WPA2-AES,64/128-bit WEP/WPS
Distance
Outdoor:50m, indoor:15m(depending on surroundings)
Image Compression
H.264/MPEG/ MJPEG
Maximal Frame Rate
30fps
Code rate
32kbps ~ 4Mbps
Account permissions
Three Level
Motion Detection
Support Four area motion detection
Manage Software
Windows website platform,support Apple iOS, Android)
Audio
Two-way audio
Audio Compression: APDCM,Speex
< 0.02W@11n, < 0.064W@11b, < 0.025W@11g
TX power (transmission power)
B means the work in the WLAN standard in 2.4GHz frequency band, the maximum theoretical bandwidth of up to
11Mbps; G means the WLAN standard in the 2.4GHz frequency band, the maximum theoretical bandwidth of up to
54Mbps; n means the WLAN standard in the 5GHz or 2.4GHz frequency band, the maximum theoretical bandwidth of up
to 600mbps. This depends on the user's access to the Internet terminal equipment support which mode.
Frequency stability
11Mbps: -86dBm@8%; 54Mbps:-73dBm@10%; 130Mbps: -66dBm@10%
Modulation type
OFDM/DBPSK/DQPSK/CCK
PC Requirements
CPU 2.0GHz or above (suggested 3.0GHz)
Memory Size 256MB or above (suggested 1.0GHz)
Display Card 64M or above
Microsoft Windows 7,Vista,XP
Browser:IE8.0,Firefox,Safari,Goolge Chrome,other standard browsers
Temperature
Humidity
Operate Temperatures:-20℃ ~ 50℃
Operating Humidity:10% ~ 95%
Reception Sensibility
11Mbps: -86dBm@8%; 54Mbps:-73dBm@10%; 130Mbps: -66dBm@10%
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Creator                         : Administrator
Title                           : YOYO 客户Cloud Camera使用说明 A4(有内容添加).cdr
Create Date                     : 2015:11:06 10:30:29+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2015:12:10 11:04:37+08:00
Metadata Date                   : 2015:12:10 11:04:37+08:00
Producer                        : Corel PDF Engine Version 15.0.0.486
Document ID                     : uuid:98c04865-eb99-4a72-9495-4d2789f413ff
Instance ID                     : uuid:385f61ce-c759-44ca-b740-0bc71fd279ba
Has XFA                         : No
Page Count                      : 5
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AGK6ND101D

Navigation menu