Secure Wireless EV-F319W Recessed Door/Window Sensor User Manual Revised Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	795918
Application ID	8QUEPmjf7e48TgZ80gvZ2A==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.8kB (34964 bits)
Date Submitted	2007-05-23 00:00:00
Date Available	2007-05-23 00:00:00
Creation Date	2007-05-23 10:37:23
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2007-05-23 10:37:23
Document Title	Revised Users Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	choque

❏✔ Tactile feedback: When any button on the EV-F319W wireless key is pressed a ‘click’
can be felt. This tactile feedback coupled with the visual LED gives absolute
confirmation that the signal was sent.
❏✔ Long Life Lithium Batteries: The EV-F319W Wireless Key is equipped with CR2025
long life lithium batteries. The average life is 7-10 years under normal conditions
before it reports low battery.
Technical Support (866) 908-TECH
EV-F319W: GE Compatible Wireless Key
USER MANUAL
Congratulations, you have purchased a GE compatible wireless key!
The EV-F319W was designed as an upgraded
version of those wireless keys and is feature rich and
user friendly to operate.
Compatibility:
The EV-F319W is compatible with all GE wireless security systems including Simon,
Concord, Concord Express and Caddx panels.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
❏✔ Tactile feedback: When any button on the EV-F319W wireless key is pressed a ‘click’
can be felt. This tactile feedback coupled with the visual LED gives absolute
confirmation that the signal was sent.
❏✔ Long Life Lithium Batteries: The EV-F319W Wireless Key is equipped with CR2025
long life lithium batteries. The average life is 7-10 years under normal conditions
before it reports low battery.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Enrolling the EV-F319W:
The EV-F319W Wireless Wall Key enrolls the same as any other GE wireless remote.
Please refer to your GE security installation manual for information on how to enroll
wireless remotes.
Version_D
Technical Support (866) 908-TECH
EV-F319W: GE Compatible Wireless Key
USER MANUAL
Congratulations, you have purchased a GE compatible wireless key!
The EV-F319W was designed as an upgraded
version of those wireless keys and is feature rich andVersion_D
user friendly to operate.
Compatibility:
The EV-F319W is compatible with all GE wireless security systems including Simon,
Concord, Concord Express and Caddx panels.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
❏✔ Tactile feedback: When any button on the EV-F319W wireless key is pressed a ‘click’
can be felt. This tactile feedback coupled with the visual LED gives absolute
confirmation that the signal was sent.
❏✔ Long Life Lithium Batteries: The EV-F319W Wireless Key is equipped with CR2025
long life lithium batteries. The average life is 7-10 years under normal conditions
before it reports low battery.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Enrolling the EV-F319W:
The EV-F319W Wireless Wall Key enrolls the same as any other GE wireless remote.
Please refer to your GE security installation manual for information on how to enroll
Version_D
wireless remotes.
Technical Support (866) 908-TECH
EV-F319W: GE Compatible Wireless Key
USER MANUAL
Congratulations, you have purchased a GE compatible wireless key!
The EV-F319W was designed as an upgraded
version of those wireless keys and is feature rich andVersion_D
user friendly to operate.
Compatibility:
The EV-F319W is compatible with all GE wireless security systems including Simon,
Concord, Concord Express and Caddx panels.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
❏✔ Tactile feedback: When any button on the EV-F319W wireless key is pressed a ‘click’
can be felt. This tactile feedback coupled with the visual LED gives absolute
confirmation that the signal was sent.
❏✔ Long Life Lithium Batteries: The EV-F319W Wireless Key is equipped with CR2025
long life lithium batteries. The average life is 7-10 years under normal conditions
before it reports low battery.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Enrolling the EV-F319W:
The EV-F319W Wireless Wall Key enrolls the same as any other GE wireless remote.
Please refer to your GE security installation manual for information on how to enroll
Version_D
wireless remotes.
Technical Support (866) 908-TECH
EV-F319W: GE Compatible Wireless Key
USER MANUAL
Congratulations, you have purchased a GE compatible wireless key!
The EV-F319W was designed as an upgraded
version of those wireless keys and is feature rich andVersion_D
user friendly to operate.
Compatibility:
The EV-F319W is compatible with all GE wireless security systems including Simon,
Concord, Concord Express and Caddx panels.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Enrolling the EV-F319W:
The EV-F319W Wireless Wall Key enrolls the same as any other GE wireless remote.
Please refer to your GE security installation manual for information on how to enroll
Version_D
wireless remotes.
Double Button Panic:
Many states have begun to outlaw the single button panic in an attempt to eliminate
false alarms. The EV-F319W can accommodate a TWO button panic by simply pressing
Buttons 1 and 2 simultaneously. This is indicated by the two RED dots printed on Button
1 and Button 2.
Press Button #3: Activates or Deactivates the disarm button
(Button #2) See Deactivating Disarm Section *
* These are toggle features to change from one state to the other, you must re-enter
programming and press the desired button to toggle the feature.
Programming:
The EV-F319W is field programmable to allow some installer customization.
To Enter Programming:
Step 1) Press and HOLD all four
buttons on the EV-F319W
simultaneously until the
LED begins to flash
(Approximately 3
seconds), release buttons.
To Enter Programming (Step 2 continued):
Press Button #2 Instant or 3 second delay on button #4 (Instant is default)*
Activate or De-activate the Disarm Button (Button #2):
Because the EV-F319W may be mounted in a location where it is easily accessible, the
homeowner may choose to use it as an arming station only.
Panic
To Disable the Disarm button (Button #2) from sending a signal, enter programming as
described in the “enter programming” section and press button #3. To verify the disarm
is disabled, press button #2. The LED will pulsate to indicate that the Disarm button
(Button #2) is not functional.
Step 2) Press Button #1
(top button): Instant or
.5 second delay
transmission on button
push (instant is default)*
Additional Features:
✔
❏ Press Button #1 Once for AWAY arming. Press Button #1 Twice for STAY arming.
✔
❏ LED Visual indication: Red LED
• Flash Once - Transmission Sent
• Flash repeatedly - NO Transmission Sent
Double Button Panic:
Many states have begun to outlaw the single button panic in an attempt to eliminate
false alarms. The EV-F319W can accommodate a TWO button panic by simply pressing
Buttons 1 and 2 simultaneously. This is indicated by the two RED dots printed on Button
1 and Button 2.
To Enter Programming (Step 2 continued):
Press Button #2 Instant or 3 second delay on button #4 (Instant is default)*
* These are toggle features to change from one state to the other, you must re-enter
programming and press the desired button to toggle the feature.
Programming:
The EV-F319W is field programmable to allow some installer customization.
To Enter Programming:
Step 1) Press and HOLD all four
buttons on the EV-F319W
simultaneously until the
LED begins to flash
(Approximately 3
seconds), release buttons.
Press Button #3: Activates or Deactivates the disarm button
(Button #2) See Deactivating Disarm Section *
Activate or De-activate the Disarm Button (Button #2):
Because the EV-F319W may be mounted in a location where it is easily accessible, the
homeowner may choose to use it as an arming station only.
Panic
To Disable the Disarm button (Button #2) from sending a signal, enter programming as
described in the “enter programming” section and press button #3. To verify the disarm
is disabled, press button #2. The LED will pulsate to indicate that the Disarm button
(Button #2) is not functional.
Step 2) Press Button #1
(top button): Instant or
.5 second delay
transmission on button
push (instant is default)*
Additional Features:
✔ Press Button #1 Once for AWAY arming. Press Button #1 Twice for STAY arming.
❏
✔ LED Visual indication: Red LED
❏
• Flash Once - Transmission Sent
• Flash repeatedly - NO Transmission Sent
Double Button Panic:
Many states have begun to outlaw the single button panic in an attempt to eliminate
false alarms. The EV-F319W can accommodate a TWO button panic by simply pressing
Buttons 1 and 2 simultaneously. This is indicated by the two RED dots printed on Button
1 and Button 2.
To Enter Programming (Step 2 continued):
Press Button #2 Instant or 3 second delay on button #4 (Instant is default)*
* These are toggle features to change from one state to the other, you must re-enter
programming and press the desired button to toggle the feature.
Programming:
The EV-F319W is field programmable to allow some installer customization.
To Enter Programming:
Step 1) Press and HOLD all four
buttons on the EV-F319W
simultaneously until the
LED begins to flash
(Approximately 3
seconds), release buttons.
Press Button #3: Activates or Deactivates the disarm button
(Button #2) See Deactivating Disarm Section *
Activate or De-activate the Disarm Button (Button #2):
Because the EV-F319W may be mounted in a location where it is easily accessible, the
homeowner may choose to use it as an arming station only.
Panic
To Disable the Disarm button (Button #2) from sending a signal, enter programming as
described in the “enter programming” section and press button #3. To verify the disarm
is disabled, press button #2. The LED will pulsate to indicate that the Disarm button
(Button #2) is not functional.
Step 2) Press Button #1
(top button): Instant or
.5 second delay
transmission on button
push (instant is default)*
Additional Features:
✔ Press Button #1 Once for AWAY arming. Press Button #1 Twice for STAY arming.
❏
✔ LED Visual indication: Red LED
❏
• Flash Once - Transmission Sent
• Flash repeatedly - NO Transmission Sent
Double Button Panic:
Many states have begun to outlaw the single button panic in an attempt to eliminate
false alarms. The EV-F319W can accommodate a TWO button panic by simply pressing
Buttons 1 and 2 simultaneously. This is indicated by the two RED dots printed on Button
1 and Button 2.
To Enter Programming (Step 2 continued):
Press Button #2 Instant or 3 second delay on button #4 (Instant is default)*
* These are toggle features to change from one state to the other, you must re-enter
programming and press the desired button to toggle the feature.
Programming:
The EV-F319W is field programmable to allow some installer customization.
To Enter Programming:
Step 1) Press and HOLD all four
buttons on the EV-F319W
simultaneously until the
LED begins to flash
(Approximately 3
seconds), release buttons.
Step 2) Press Button #1
(top button): Instant or
.5 second delay
transmission on button
push (instant is default)*
Press Button #3: Activates or Deactivates the disarm button
(Button #2) See Deactivating Disarm Section *
Activate or De-activate the Disarm Button (Button #2):
Because the EV-F319W may be mounted in a location where it is easily accessible, the
homeowner may choose to use it as an arming station only.
Panic
To Disable the Disarm button (Button #2) from sending a signal, enter programming as
described in the “enter programming” section and press button #3. To verify the disarm
is disabled, press button #2. The LED will pulsate to indicate that the Disarm button
(Button #2) is not functional.
Additional Features:
✔ Press Button #1 Once for AWAY arming. Press Button #1 Twice for STAY arming.
❏
✔ LED Visual indication: Red LED
❏
• Flash Once - Transmission Sent
• Flash repeatedly - NO Transmission Sent

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:05:23 10:37:23-07:00
Modify Date                     : 2007:05:23 10:37:23-07:00
Page Count                      : 1
Creation Date                   : 2007:05:23 17:37:23Z
Mod Date                        : 2007:05:23 17:37:23Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : choque
Metadata Date                   : 2007:05:23 17:37:23Z
Creator                         : choque
Title                           : Revised Users Manual.pdf

EXIF Metadata provided by EXIF.tools