Secure Wireless EV-F345 Wireless Remote Control Transmitter User Manual 6658 SW Evol Manual

Secure Wireless, Inc Wireless Remote Control Transmitter 6658 SW Evol Manual

User Manual

WARRANTYSecure Wireless offers a Lifetime Warranty on thisproduct. Secure Wireless agrees to repair or replace thisproduct at no cost to the user.For return authorization please contact:Secure Wireless1185 Park Center Drive, Suite A/B Vista, CA 92083866-966-9473This device complies with part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.4 Button Wireless TransmitterFor use with Part #s: EV-F319/EV- F345/EV-F433USER MANUALButton 1 Button 26658-SW-Evol Manual 10/2/02 9:10 PM Page 1Caution: Any changes or modifications not expresslyapproved by Secure Wireless could void user's authorityto operate the equipment.
I . Programming the Remote into the Alarm SystemRefer to the programming guide that came with youralarm system for programming a wireless device (KEYFOB) into the security system.II. Changing Panic Operation to Delay Mode or Instant ModeNote: To use this feature you must have programmedbutton 4 into the alarm panel as “PANIC”.SETTING PANIC BUTTON INTO INSTANCE TRANSMISSION MODE1. Press all 4 button at the same time until the LED begins to flash. (This will take approximately 3 seconds before LED flashes.)2. Release all 4 buttons 3. Press Button 1 (TOP LEFT BUTTON)4. LED should stop flashingSETTING PANIC BUTTON FOR DELAY TRANSMISSION MODE(You must hold down panic for 3 seconds before transmission is sent)1. Press all 4 button at the same time until the LED begins to flash. (This will take approximately 3 seconds before LED flashes.)2. Release all 4 buttons 3. Press Button 2 (TOP RIGHT BUTTON)4. LED should stop flashing6658-SW-Evol Manual 10/2/02 9:10 PM Page 2

Navigation menu