Secure Wireless V2DW319 Door Window Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1663304
Application ID	THvW5qvQEXMwiAqdjlTVRw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.86kB (198218 bits)
Date Submitted	2012-03-26 00:00:00
Date Available	2012-03-26 00:00:00
Creation Date	2011-04-25 13:57:34
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-04-25 13:57:34
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	JeffC

REPLACING THE BATTERIES
Pop open the case
using a coin. Replace
with a new battery ( +
) or positive polarity
should be facing up
Replace Cover
FCC Compliance
This device complies with Part 15 FCC Rules. Operation
complies with the following 2 conditions (1) This device
may not cause harmful interference and (2) this device
must accept any interference received, including
interference that may cause undesired operation
MODEL
FCC ID
SW-NAP-V2DW
QNP-V2DW319
FREQUENCY
WARRANTY
BATTERY
319.5 MHz
Limited Life Time
CR2032 Replace with
Panasonic
200-10005 Rev A
MANUAL PART #
SW-NAP-V2DW
Door Window Sensor
NAPCO COMPATIBLE
INSTALLATION MANUAL
TECHNICAL SUPPORT
Secure Wireless 866-908-Tech
www.mysecurewireless.com
Alpha Chart
A - *0
B - *1
C -*2
D - *3
E - *4
F- *5
DOOR WINDOW MOUTING / USAGE
The SW-NAP-V2DW Door Window is equipped with an
internal reed switch as well as the ability to use an external
magnet.
Mounting
Double Sided Tape is included for
easy installation.
Reed Switch (Use Point 1
when Programming )
Align the Arrow on magnet with
the 3 lines on the side of the
sensor case
Mount the magnet no more than
¼ in from the sensor.
SLIM DOOR WINDOW SENSOR ENROLLMENT /
PROGRAMMING
The SW -NAP-V2DW Door Window is equipped with an
internal reed switch as well as the ability to use as
external magnet .
For a detail programming guide, the instruction manual
should be consulted for that panel. The below guide
should only be used as a reference and not as a
replacement for using the programming instructions.
1.
2.
3.
4.
Pull Battery Tab
ENTER PANEL PROGRAMMING
ENTER Zone
ENTER Serial ID ( Auto-learn or Manual)
To Auto-Learn

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Tagged PDF                      : Yes
Author                          : JeffC
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2011:04:25 13:57:34
Modify Date                     : 2011:04:25 13:57:34
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools