Security Group SSG-SD01 Smoke Detector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1655798
Application ID	5SdaW3YLyPixsv2wOPTm9g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.15kB (314333 bits)
Date Submitted	2012-03-14 00:00:00
Date Available	2012-03-14 00:00:00
Creation Date	2012-03-05 10:59:30
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-03-05 10:59:30
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	admin

smoke sensor user manual
Smoke sensor apply to places with less smoke,no smoke to detect smoke ion. Be able to
accurately detect smoke when the smoke concentration over the limit. The sensor will give out
sound and light alarm,and export alarm signals to the collector.
One. Technical parameters
●Power supply: 9 V alkaline batteries or carbon battery
●Working current: static current less than 10 UA, alarm working current between 10-30 MA
●Frequency: (wireless type) 315 or 433 MHZ; transmitting distance ≥ 100 meters (open area,
no interference)
●Output: (wired type)dry contact,on guard,output close circuit, on alarm, output short circuit,
Impedance less than 50 oumu
●Smoke sensitivity: fits UL 217, when the standard factory testing value is each feet 3.2% of
weak dust, the sensor reacts.
●Work environment: -5℃-50℃, 10-90% no condensation
●Buzzer volume strength: 85DB within 10 feet
●Battery life: at least one year without self-checking function
●Inside the room every 25 to 40 square meters installs a smoke detector, important equipment
above 0.5-2.5 meters installs a smoke detector
Two. Introductions for installing locations
a) Places avoid installing
1.Too close to the door ,window ,fan etc all can affect sensor sensitivity,because these places
generally have quick air circulation
2.Do not install in high temperature and wet places, such as the bathroom, the roof or higher
temperatures more than 39 ℃ or less than 5℃ places
Avoice installation in the palces showed in the following picturtes
1) Places too close to the doors
2) Places too close to the windows
3) Places too close to the wall columns
b) Installing locations for reference
Smoke sensor should be installed in open area far away doors, windows, wall culumns etc all
can affect sensor sensitivity. It works well when there is no barriers between alarm main panel
and smoke sensor. Besides, before making positioning hole, calling test must be carried out,
that is whether the communication beween smoke sensor and alarm main panel is smooth.
Installations are showed in the following pictures:
1) Far away from the doors
2) Far away from the windows
3) Far away from the wall columns as possisble as you can
c) Installing steps
Attentions before installing: Before installaion, check and assure smoke sensor to work
properly and communicate right with the alarm main panel.
1) Tools for installaion
3）Take out battery to connect powerline, then put in battery jar
4) Press the testing buttton on the smoke sensor for 3-5 seconds, the smoke sensor will make
“BBBB” sound and flash the indicator light, that prove the smoke sensor work well. ( Attentions:
firstly assure the smoke sensor can work properly )
5) when smoke sensor connected with the alarm mian panel and start the alarm mian panel
as the user manual and repeat the step 4, the main panel will issue a siren which proves
the sensor and main panel can work well.
6) Choose an appropriate area showing in the following picture and mark two mounting holes
as the red arrows showed.
7) Punch two holes ( 3.5cm deep, 6mm wide ) at the marks with a percussion drill
8) Make the two plastic nails into holes with a hammer
9)Screw up to about 1 cm left with a screwdriver as the direction (anticlockwise) of red arrow in
the following picture
10) Rotating the bracket to the other hole as the direction (anticlockwise) of red arrow in the
following picture
11) Then screw up according to anticlockwise
12) Aim the sensor at the fastener on the bracket and make it into the waist-shaped hole of the
back cover then check and confirm it. Rotate the baxk cover as the direction (clockwise) of red
arrow in the following picture. Repeat step 4 to assure the sensot to work well.
Four. Working and testing program
Working:This sensor will be in working status once it installed and powed on,in working status,
Leds flashing once per minute,when the smoke particles concentration reach the testing
range,this sensor will give out clear alarm sound and send alarm singals or or export alarm
signals to capture card till the smoke clear away
Teating: Press the test button and maintain it for 3 seconds or above,the smoke sensor will
give out clear alarm signals or export it to capture card, you can also insufflate smoke into the
smoke sensor to test it.( Every week to make a test to ensure the reliability of the sensor)
Five. Maintain and matters need attention
To maintain the sensor working efficiency is good, every 6 months need to clean the sensor,
first take the battery off, then clean the dust with brush, then put the battery pack
Attentions:
Abnomal temperature might lead to false alarm, but it will stop alarming as long as the
ventilation is good. Besides, dust also can reduce the sensitivity of sensor. So please improve
this situation as mentioned above.
FCC warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generate,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:03:05 10:59:30+08:00
Create Date                     : 2012:03:05 10:59:30+08:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D20D1CCB8D0D3A2CEC4CBB5C3F7CAE92E646F63>
Creator                         : admin
Document ID                     : uuid:bb8f36ac-9694-4ea2-9632-6bb012333bb8
Instance ID                     : uuid:462085b5-27a5-45a4-9f13-bbdd866c119d
Page Count                      : 5
Author                          : admin

EXIF Metadata provided by EXIF.tools