Security V390Apt Sp433 03 00 !spec433(no UL) User Manual

User Manual: Security V390Apt Sp433-03-00 V390APT_SP433-03-00 OldDatasheets specifications Products English-US s Collateral

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

VICON

NOTES

SPEC NO.

REV.

SEC.

SUPERSEDES PRODUCT
SPECIFICATION 433-499

433

706

5

PRODUCT SPECIFICATION
MODEL: V390APT AND V390APT-PP
PRODUCT CODE: 0170 AND 0170-03
DESCRIPTION: WEATHERPROOF HEAVYDUTY PAN-AND-TILT DRIVE
●

80 lb (36 kg) load rating

●

Weatherproof

●

Heavy-duty

●

Autopan

V390APT PAN-AND-TILT DRIVE

This 120 VAC unit may be operated directly by a control.
The V390APT Pan-and-Tilt Drive is a weatherproof, heavyRefer to Table 1 for maximum operating distances.
duty unit with autopan capable of operating with loads up to
80 pounds (36 kg) and 75 pounds (34 kg) in an inverted posiCAUTION: Use of units with the preset option in autopan
tion (indoors only). The heavy-duty motors are constructed
mode voids the warranty. Mounting the unit outdoors in the
with hardened-steel gears that never require lubrication. Allinverted position voids the product warranty.
weather protection is provided by "O" ring and gasket seals with
Teflon* wear surfaces. Solenoid-operated brakes provide excellent ASSOCIATED EQUIPMENT AND ACCESSORIES
operating stability with minimum coast. Counterbalanced tilt arms
Model V501G Cable Guard: Prevents cable entanglement
provide smooth, reliable tilt operation. Model V390APT-PP
during combined pan-and-tilt action. Product code 0212.
allows preset position operation with an appropriate control.

CONTRACTORS’ SPECIFICATION
WEATHERPROOF PAN-AND-TILT DRIVE
The pan-and-tilt drive shall be a weatherproof type with a load rating of 80 lb (36 kg) or 75 lb (34 kg) when mounted indoors
in the inverted position. It shall be capable of continuous unattended panning. A version with preset position operation shall
also be available.
The load rating shall be based on a moment-arm distance of 10 inches (25.4 cm) from the center of gravity of the load to
the center of tilt rotation. Torque rating shall be 40 lb-ft (54 N-m) in the pan mode and 70 lb-ft (95 N-m) in the tilt mode.
Maximum horizontal travel shall be 350º, and maximum vertical travel shall be 90 deg. Pan speed shall be 6º/sec and tilt
speed shall be 4º/sec with 60 Hz input or 5º/sec pan and 3.3º/sec tilt with 50 Hz input.
The pan and tilt motors shall be impedance protected. Double limit switch protection shall be provided in both directions.
Braking shall be minimum coast, solenoid actuated in the pan and tilt modes. Pan limit stops shall be externally adjustable.
Dimensions shall not exceed: height: 14.0 in. (35.6 cm) (tilt platform horizontal); width: 10.8 in. (27.4 cm); depth: 6.5 in.
(16.5 cm). The weight shall not exceed 37 lb (17 kg). Construction shall be of corrosion-protected steel and aluminum.
Hardened steel shall be used for all gears, and bearings shall be heavy-duty roller type, factory lubricated for life. All seals
shall be either O-ring or gasket type and have Teflon at wear surfaces.
The operating ambient temperature range shall be -30 to +140ºF or -34 to +60ºC.
The unit shall operate from 120 V, 50/60 Hz. Maximum input power shall not exceed 75 W nor maximum current exceed
0.68 A with pan and tilt functions operated simultaneously. Limit and reversing switches shall have 11 A, 10-million cycle
rating.
The weatherproof pan-and-tilt drive shall be Vicon's model V390APT; the preset version shall be Vicon model V390APT-PP.
Product specifications subject to change without notice.
Copyright ©2006 Vicon Industries Inc. All rights reserved.

Vicon part number 8006-7433-03-00
Vicon and its logo are registered trademarks of Vicon Industries Inc.

VICON INDUSTRIES INC. 89 ARKAY DRIVE, HAUPPAUGE, N.Y. 11788 ❖ TEL: 516-952-CCTV (2288) ❖ FAX: 516-951-CCTV (2288)
TOLL FREE: 800-645-9116 ❖ UK: 44/(0)1489/566300 ❖ INFOFAX: 800-287-1207 ❖ WORLD WIDE WEB: www.vicon-cctv.com

TECHNICAL INFORMATION
ELECTRICAL

Load Rating:

Input Voltage:
Power Consumption:

Heat Equivalent:

120 V, 60 Hz.
Pan: 21 W.
Tilt: 44 W.

Braking:

3.6 btu/min (0.9 cal/min).
Note: These figures represent the
conversion of 100% of the electrical
energy to heat. Actual percentage of
the heat generated will be less and
will vary from product to product.
These figures are provided as an aid
in determining the extent of cooling
required for an installation.

Overload Protection:
Limit Switches:

Reversing Switch:
Cable Requirements:

Automatically engaging solenoid
brake in pan and tilt for minimum
coast.

MECHANICAL
Dimensions:

Weight:
Normal Operating
Current:

Based on C.G. to center of tilt rotation
distance of 10 in. (25 cm).
Upright: 80 lb (36 kg).
Inverted: 75 lb (34 kg).

0.68 A (pan-and-tilt functions operated simultaneously at rated speeds).

Construction:

Impedance-protected motors.

Finish:

11 A, 10-million cycle rating. Double
switch protection both directions.

Bearings:

11 A, 10-million cycle rating.
8-conductor, unshielded.
Preset: 12-conductor, unshielded.

See Figure 1.
Height: 14.0 in. (35.6 cm).
Width: 10.8 in. (27.4 cm).
Depth: 6.5 in. (16.5 cm).
36.2 lb (16.4 kg).
Die-cast aluminum housing. All parts
corrosion-protected steel or aluminum.
Light gray enamel.
Heavy-duty roller bearings on all
rotating parts.

Gears:

Hardened steel.

Seals:

“O” ring and gasket seals with Teflon
for all-weather protection.

Reversing:

Instantaneous.
Pan: continuous.
Tilt: intermittent.

OPERATIONAL
Angular Travel:

Pan: 350º maximum.
Tilt: ±90º maximum.

Duty Cycle:

Limit Stops:

Externally adjustable.

Shipping Dimensions:

Speed:

Pan: 6º/sec at 60 Hz.
5º/sec at 50 Hz.
Tilt: 4º/sec at 60 Hz.
3.3º/sec at 50 Hz.

Shipping Weight:

38.8 lb (17.6 kg).

Shipping Volume:

1.4 ft3 (0.04 m3).

Torque:

Pan: 480 lb-in. (54 N-m).
Tilt: 840 lb-in. (95 N-m).

Height: 9.3 in. (24 cm).
Width: 14.0 in. (36 cm).
Length: 18.0 in. (46 cm).

ENVIRONMENTAL
Ambient Temperature
Range:

-30 to 140ºF (-34 to 60ºC).

TABLE 1
MAXIMUM OPERATING DISTANCES

2

Control Model

Wire Size (AWG)
Annealed Copper

Maximum Distance
ft (m)

V123APT

20
18
16
14

830 (250)
1,300 (400)
2,200 (9670)
3,400 (1,000)

Spec. No. 433

7.0 in.
(18.0 cm)

0.75 in.
(1.9 cm)

5.0 in.
(13.0 cm)

1.2 in.

4.6 in. (3.0 cm)
(11.6 cm)
1.9 in.
(4.9 cm)

3.5 in.
(8.9 cm)

1.9 in.
(4.9 cm)

(5) 0.28 in. (0.07 cm) Dia. Holes

6.5 in.
(16 cm)

10.8 in.
(27.5 cm)

14.0 in.
(36.0 cm)
10.1 in.
(25.7 cm)

5.1 in.
(13 cm)
6.1 in.
(16 cm)

5.1 in.
(13 cm)
6.1 in.
(16 cm)

SIDE VIEW

FRONT VIEW
Figure 1
Overall Dimensions

3

Spec. No. 433



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2005:12:08 08:51:41Z
Creator Tool                    : QuarkXPressª 4.04: LaserWriter 8 8.7.1
Modify Date                     : 2006:07:17 08:44:50-04:00
Metadata Date                   : 2006:07:17 08:44:50-04:00
Format                          : application/pdf
Creator                         : Donna Rella
Title                           : !spec433(no UL)
Producer                        : Acrobat Distiller 4.0 for Macintosh
Document ID                     : uuid:62fef4ab-8004-44e6-b1a4-a832d03f3827
Instance ID                     : uuid:696430f0-c151-4182-98ef-c86017689840
Page Count                      : 3
Author                          : Donna Rella

EXIF Metadata provided by EXIF.tools