Seecode Technology and KG VOSSORPB VOSSOR PHONEBOOK User Manual MHF86 OM R4

Download:
Mirror Download [FCC.gov]
Document ID	893453
Application ID	RpV1I1fIl/pOR+CCrLcuVQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	68.74kB (859215 bits)
Date Submitted	2008-01-24 00:00:00
Date Available	2008-01-24 00:00:00
Creation Date	2007-11-07 08:52:54
Producing Software	pdfFactory Pro 2.28 (Windows XP Professional)
Document Lastmod	2007-11-30 10:20:14
Document Title	MHF86-OM-R4.cdr
Document Creator	pdfFactory Pro www.pdffactory.com
Document Author:	mae

| MHF86 |
Bluetooth TM Rear - view Mirror Handsfree kit
VOSSOR
PHONEBOOK
Operation Manual
Please read the user manual before use
1. The Device
Content
1 .The Device
1.1 Features
1.2 Accessories
1.3 Pa rt De scription
1.4 Ke ys , F unctions and Specifica tion
1.5 LED and LCD Display Indicators
1.1 Features:
˙Phone Book data transfer via either OPP (object Push Profile) or
AT command
˙Ultra Large phone book capacity
˙Scrolling Caller Name and number
˙Supports Phone Status (mobile phone signal strength and battery capacity)
2 .Get Started
2.1 Ch arging
2.2 Po wer On
2.3 Pa iring/Connecting the Bean
2.3.1 First Time pairing
2.3. 2 Conn ecting
2.4 Se tting up the Vossor
2.4.1 L CD Scree n
2.4.1.1 Contra st
2.4.1.2 Inverse
2.4.2 Volume Co ntrol
2.4.3 Ring Volume C ontrol
of the Bluetooth mobile phone
3 .Making Call
3.1 Making Call from phone boo k
3.2 Making Call from Call register / last dialed number
3.3 Re ceiving Call
3.4 Re jecting Call
3.5 Ca lle r ID Display
3.6 Voice Dialing
3.7 Options during a Call
3.7.1 Call Waiting
3.7.2 Transfer Call betw een mobile and Vossor during conversation
3.7.3 Mic Gain cont rol an d Mute
3.7.4 DTMF
˙ Professional DSP for echo cancellation and noise reduction
˙ Microphone gain control
˙DTMF (DUAL TONE MODULATION FREQUENCY)
˙Speed Dialing
˙ Digital Volume Control
˙ Dot Matrix LCD
˙ Call Register
˙ Voice Dialing
˙Screen Contrast Adjust
˙Software Upgradeable
1 . 2 Accessories
˙Build-in Battery
*Not ALL mobile phones support this features, please consult you mobile phone manufacture r
for details
4 .Call Feature
5.1 Ph one Book
5.1.1 AT Comman d
5.1.2 OPP (Object Push Prof ile)
5.2 Sp eed Dialing
5.3 De let ing Phone Book Ent ry
Rechargable battery
5 . Trouble Shooting
1 . 3 Part Description
LCD Screen
DTMF (Dial Tone Modulation Frequency):
˙Activate only during the line is connected.
Michelle Home
Phone book
˙Transferring t he phone book contacts from mobile phone and
SIM to Vossor via OPP or AT Command
Menu
LCD setting
˙Contrast
Disconnect BT
Speed Dialing
˙Offer 3 slots memory for speed dialing
Del Phone Book
˙Delete entire phone book content
1 . 4 Keys and Functions
˙Receive call
˙Voice dialing
˙Conversation transfer
˙Yes
˙Bluetooth link connection
˙End call
˙Reject call
˙No
˙Power on / off
(press and hold for 2 seconds)
˙Volume +
˙Upward
˙Leftward
˙Microphone gain control +
˙Volume
˙Downward
˙Rightward
˙Microphone gain control -
1 . 5 Specification
1 . 6 Indicator
LC D Display Indicators:
Welcome Screen
BT Paring Mode
BT Paring Successful
BT Search Mode (BLINKING)
BT Disconnected
Outgoing Call
Incoming Call
Missed Call
Menu
Recep tion s ignal strength Indi cator
(for mobile phone only)
Call Register
*BT:
Battery level Indicator (for mobil e phone only)
Call Transfer to Mobile (During a call)
Line Switchin g in Ca ll waiting
Voic e Diali ng
Call Register
Volu me Indicato r
AT Command Inquire
AT Command Pho ne Book Transfer in process
AT Comm and Phone Book Transfer Finished
OPP Phone Book Transfer in process
Bluetooth ™
LE D Indicator
S t ea d y: Ba tt er y ch arging in pr o gress
R ed Light
B lue Li ght
B li nk in g (eve r y 1 s ec on d ): b att ery i n l ow le ve l,
re ch arging is r e com m e nd e d
B li nk in g (eve r y 15 seco n d): Unit is in o n
2. Get Star ted
2.3.2 Connecting
2.1 Charging:
Hint: To prolong the battery life, it is highly recommended to charge
continuously for at least 8 hours before use.
Step to Charge Vossor
CIGAR LIGHTER
CHARGING
STEP1 :Connect the car charger to a power outlet
STEP2 : Connect the USB to the car charger
After pairing, you can connect the mirror via your mobile or by pressing
the
once. Make sure Bluetooth has been activated on the mobile
phone before pressing the button.
(Please refer to your mobile's operation manual about connecting
Bluetooth device)
Once it is connected, user will hear “Beep” once . The mobile's ID will be
displays on the screen. Ex:
STEP3 : Connect the DC power jack to Vossor
2.4 Setting up Vossor
**Setup function only available when Vossor is connected to a device.
2.4.1 LCD Display:
2.2 Power on:
1. Power on the unit by switching the button on the top of the unit .
2 . The unit will then enter search mode
2. Vossor will stay in search mode
for 5 second
3. If no device was found,
will display on the screen. To search again,
press
once to activate search mode.
Before automatic connection , please make sure Bluetooth mode on your
. is activated and you must at least successfully paired and
mobile phone
connected to Vos sor at least once in order to act ivate this f eature.
2.3 Pairing / Connecting Vossor:
2.3.1 First time pairing
1.Press M
2.Scroll the menu by pressing
3.Press
to enter
or
until you see LCD CONTRAST
2.4.1.1 Contrast
1. In the contrast menu, you will see
. This is the status bar
showing the contrast level of the LCD Display. There are 10 levels
which user can adjust by pressing
to their desired level.
2 . Press
to save setting
2.4.2 Volume
User can adjust the volume by pressing the
1. Power on Vossor and wait until it is no longer searching .
2 . Press and hold MENU for 2 second and the screen shows
READY PAIRING
3. Follow your mobile ' s operation menu on how to pair a device
When Vossor was successfully found by your mobile, it will display the
register ID on your mobile . The ID of Vossor is “ SEECODE ” and it will
display on your mobile when linked.
4. Enter “ 1234 ” when a passcode is requested.
Vossor will display
to indicate pairing is successful.
or
during a call.
2.4.3 Ring Volume
User can adjust ring volume level by pressing the
or
in the root.
3. Making Call
3 . 5 Caller ID Display
User can make call either from mobile or Vossor
Caller ID display is a network service, please consult your network provider
for details.
3.1 Making Call using Phone Book
Caller ID can be displayed in 2 ways :
1.
2.
3.
4.
Press M
Scroll the menu by pressing
or
until you see PhoneBook
Press
to enter Phone Book
To reduce search time, scroll the first character of the desired name by
pressing
or
, then press
to select .
5 . Press
to dial
To setup phone book, please refer to Page 10 “Phone Book” for detail
1. By Name
Vossor can display the caller's name when receiving call. To display the
caller's name, the name must be stored in the phone book.
2. By Phone Number
Phone number will be displayed if there is no record in the phone book .
3.6 Voice Dialing
3.2 Making Call from Call Register / last dialed number
1. Press
2 . Scroll the phone list by pressing
number, then press
or
until you find the desired dialed
3.3 Making Call through Speed Dialing
1. Press and hold either
2. Call will automatically dial out
or
for 2 second
HINTS : In order to use Speed Dialing , the phone book must be pre - setup .
Please refer to page 13 for detail .
3.3 Receiving Call
User can accept call either through the handset or Vossor
To accept Call using Vossor, simply press
3.4 Rejecting Call
To enter Voice dialing mode :
1. Hold
key for 2 seconds
2. Speak the name after the tone
If failed to recognize, you will hear a deep beep tone twice, press
exit and repeat above procedures.
3.7 Options during a call
3.7.1 Call Waiting:
** This is a network service , please consult your network provider for details
Accepting incoming call during a conversation
1. Press
and it will automatically switch to Line2
2. To switch between to Lines, press
and display will show
3. Press
or
to choose
4. Press
to confirm
3.7.2 Transfer Call between mobile and Bean during conversation *
Press and hold
To reject call, simply press
for two seconds.
3.7.3 Mic Gain control and Mute
Mic Gain:
To increase Microphone Gain, press and hold
for 2 seconds.
To decrease MicrophoneM Gain. hold
for 2 seconds
Mute
To mute , simply press
. To cancel, press
once again.
to
10
3 .7.4 DTMF (Dial Tone Modulation Frequency )
To use DTMF Function:
1.Hold M for 2 second.
2.Scroll the desire number by pressing
3.Press
to dial
4. Call Feature
4 .1 Phone Book
or
HINTS : This function is available only during conversation
AT command and OPP (Object Push Profile) function can automatically
transfer the contacts from mobile to Vossor
HINTS : NOT ALL MOBILES SUPPORT ABOVE FEATURES
4.1.1 AT Command
To Transfer the Phone Book from mobile via AT command:
( Please make sure the Vossor and the mobile is connected )
1. Press M
2. Scroll the menu by pressing
or
until you see PHONEBOOK
3. Press M
to enter Phone Book Transfer Inquire
4. Press
to start or Press
to cancel
5. When contacts transfer is processing, LCD will show
and
blinking .
6. Once transfer was succeeded, it will indicate
4.1.2 OPP (Object Push Profile)
Vossor supports single contact or group contacts transfer via OPP function.
For detail operating procedures , please refer to your mobile phone's user
manual.
To Transfer the Phone Book from mobile via OPP:
1. Disconnect Bluetooth link from Vossor setting (If it is currently connected)
2. Do the proper setting on the mobile phone for copying and transferring
the contacts from the mobile phone to Vossor .
( Please refer to you mobile phone ' s user manual )
3 .When the contacts is transferring, display shows
4. After transferring done, display shows “ xxx records ”. The “ xxx ” is a
number representing the total contacts which have been successfully
transferred to Vossor .
5. Connect Vossor again.
Access phone book in Vossor to check whether the contacts were
successfully transferred .
Some mobiles are able to register multiple phone numbers under the same
name. Vossor phonebook can distinguish the number by a suffix
< M > ( moblie ), < H > ( home ) and < O > office at the caller ' s name.
11
12
5 . Trouble Shooting
4.2 Speed Dialing
Phone status showing :
It is depending on the availability and provides by the connected mobile phone
To activate speed dialing , phone book must be pre-setup.
4 .2.1 Setup speed dialing:
1. Press M
2. Scroll the menu by pressing
or
until you see SPEED DIALING
3. Press
4. Browse for empty slot by pressing
or
, there are totally 3 slot, each
slot is represented by
, and M (M is representing
button )
5. Once you find an empty slot. Press
and Vossor will automatically
( If phone book is empty , Press
switch to AT Command Mode)
6. Browse the phone number that you wish to set as speed dial
7. Press
to confirm
8. To exit, simply press
to return to main menu
HINT : If a slot is empty , user can simply press the desired key for 2 second ,
then follow the above procedures from 5 to 8 .
Once you have setup a number in a slot, you are required to delete it
before setting up a new number on the same slot.
Voice too low to be heard from the person who talking to Vossor user :
Do the following steps while conversation in progress
1. Adjust the microphone gain to maximum on Vossor , or
2. the person who is talking to Vossor user adjust his/her mobile phone volume
to maximum.
Strong echo heard from the person who is talking to Vossor user:
unable to eliminate .
4.3 Deleting Phone Book entr y
1. Press
2. Scroll the menu by pressing
or
until you see Del Phone Book .
3. Press
4. Display shows Are you sure ?
( do not allow deleting single entry , ALL entries will be deleted after
confirmation )
5.Press
to confirm
6.While delete is processing, it will display Deleting PB
7.Display shows Deleted ALL when Phone Book is cleared
8.Press
to return to Main Menu
13
Loudspeaker sound level too low :
Please increase the volume level to maximum on the mobile phone during
conversation.
During Conversation , transfer the call to mobile and listen. If echo disappeared,
please transfer the call again from mobile phone to Vossor and lower the loud
speaker until echo is eliminated. If the echo is still remains, that means the
echo is generated by the network provider or mobile phone itself. Vossor is
4 .2.2 Modifying / Deleting Speed Dialing Number
To delete a number in Speed Dialing Entry :
1. Press
2. Pressing
or
until you see SPEED DIALING , then press
3. Browse for the slot which you would like to modify
4.Press
twice, and the screen will show Delete?.
5 .Press
to confirm or
to cancel.
Mobile phone couldn't Pair with Vossor:
1.Please power off and on again Vossor then repeat the pairing procedures again.
2.Set off all other Bluetooth devices before start pairing.
3.Either Vossor and the mobile phone are able to be master or slave to pair with
other Bluetooth device, however pairing will not work if those are being master
or slave at the same time.
Loudspeaker volume of Vossor too low or high and impossible to adjust it:
Please adjust the volume directly on the mobile phone as desired, then fine
tune it by the volume control of Vossor .
The number dialed by mobile phone couldn't be found from Vossor:
All number which are dialed directly from the mobile are unable to save in
Vossor , please check it on the mobile phone.
The LCD display frozen or all buttons disabled:
Simply turn off the unit and turn on again.
14
15
*** Caution ***
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Changes of modifications not expressly approved by the party responsible for
compliance could void the user ’s authority to operate the equipment.
FCC statement
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2007:11:07 08:52:54+08:00
Modify Date                     : 2007:11:30 10:20:14+08:00
Page Count                      : 10
Author                          : mae
Producer                        : pdfFactory Pro 2.28 (Windows XP Professional)
Creation Date                   : 2007:11:07 08:52:54+08:00
Mod Date                        : 2007:11:30 10:20:14+08:00
Metadata Date                   : 2007:11:30 10:20:14+08:00
Title                           : MHF86-OM-R4.cdr
Creator                         : mae
Has XFA                         : No

EXIF Metadata provided by EXIF.tools