Seikilife 1626-63 Echo Audio Bottle User Manual JM IM 1626 63 09 20
Seikilife (Shanghai) Housewares Co., LTD Echo Audio Bottle JM IM 1626 63 09 20
15_1626-63 UserMan
Echo Audio Bottle
Sports Bottle
Instruction Manual
1626-63
1 x Echo Audio Bottle (1626-63)
1 x USB to Micro-USB Charging Cable
2 x Instruction Manual
Max 4hrs operating time
Charging time: up to 2hrs
Pairing Name: “Echo Audio Bottle”
(Be sure to fully charge the speaker before
Charging the Speaker
Connect the provided charging cable to a
power source and to the micro USB port on
the speaker (3).
The LED indicator light will glow red when
charging and turn off when fully charged.
Bluetooth Setup:
Press and hold Power Button(1) to turn ON
the speaker, Bluetooth LED Indicator(2) will
Turn on the Bluetooth function on mobile
device , Select “Echo Audio Bottle” pairing
successfully paired before.
Press and hold the Power Button(1) to turn
off the device.
Music Control:
Audio volume and track selection can be
made by using the mobile device.
1.
•
2.
•
•
•
3.
•
1.
2.
3.
•
•
•
Power Button
LED Indicator
Micro USB Input
What’s included:
Functions:
Instructions: This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
(1)
(2)
*
FCC Statement:
MADE IN CHINA
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
The unit’s full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close
supervision is necessary when the product
is used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For
professional. Incorrect reassembly may
or temperatures above 104°F may cause
explosion.
use only identical replacement parts to
ensure product safety
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
SAFETY PRECAUTIONS:
Working Volume
Charging Power
Bluetooth Version
Recharge Method
Battery Capacity
Rated Power
Bluetooth Range
Bottle Material
Product Size
Product Weight
FCC ID
3,4 - 4,2 V
5 V (CC)/500 mAh
RDABT host 4.0
Micro-USB
450 mAh
3 W
< 7,5 m
Tritan (sans BPA)
8,8 cm x 8,8 cm x 29,7 cm
227 g
2AOAW-162663
CLEANING:
To clean the bottle,twist to separate the
speaker lid from the bottle body.Clern the
bottle separately avoid damage to the
sperker.
(1) Hand wash racommended
(2) Use an non-abrasive cleaner
(3) To clean the speaker,wipe with a damp
cloth
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures: