Seiko Epson AE-H931RX LCD Projector User Manual 1 Part 1

Seiko Epson Corporation LCD Projector 1 Part 1

User Manual 1 Part 1

User's GuideModel: H928A,H930A,H931ALCD ProjectorEH-TW9400EH-TW8400WEH-TW8400Pro Cinema 6050UBHome Cinema 5050UBeHome Cinema 5050UB
Organization of the Guide and Notations in the Guide1Using Each GuideThe guides for this projector are organized as shown below.Safety Instructions/Support and Service GuideContains information on using the projector safely, as well as a support and service guide,troubleshooting check lists, and so on. Make sure you read this guide before using the pro-jector.User's Guide (this guide)Contains information on setting up and basic operations before using the projector, usingthe Configuration menu, and handling problems and performing routine maintenance.WirelessHD Transmitter User's Guide (H931A/EH-TW8400W/Home Cinema 5050UBe only) Contains information on handling the WirelessHD Transmitter and warnings and so on.Quick Start GuideContains information on the procedures for setting up the projector. Read this first.
Organization of the Guide and Notations in the Guide2Notations Used in This GuideSafety IndicationsThe documentation and the projector use graphical symbols to show how to use the projector safely.The following shows the symbols and their meanings. Please understand and respect these caution symbolsin order to avoid injury to persons or property.WarningThis symbol indicates information that, if ignored, could possibly result in personal injury or even deathdue to incorrect handling.CautionThis symbol indicates information that, if ignored, could possibly result in personal injury or physicaldamage due to incorrect handling.General Information IndicationsAttentionIndicates procedures which may result in damage or malfunctions to occur.cIndicates additional information and points which may be useful to know regarding a topic.sIndicates a page where detailed information regarding a topic can be found.Menu Name Indicates Configuration menu items.Example: Image - Color ModeButton Name Indicates the buttons on the remote control or the control panel.Example: buttonAbout the Use of "This Product" or "This Projector"As well as the main projector unit, supplied items or optional extras may be referred to using the phrase "thisproduct" or "this projector".
Contents3Organization of the Guide andNotations in the GuideUsing Each Guide ..................... 1Notations Used in This Guide ........... 2Safety Indications.......................2General Information Indications .............2About the Use of "This Product" or "This Projector"..................................... 2IntroductionPart Names and Functions ............. 6Front/Top ............................. 6Control Panel .......................... 7Remote Control ......................... 9Rear ................................ 12Base ................................ 13PreparingInstalling ............................ 14Projected Image and Position of Projector.....14Installing in parallel with the screen ........ 14Installing the projector horizontally byadjusting the height of either side ......... 14Various Setting Methods.................15Placing on a table and projecting.........15Suspending from the ceiling and projecting.................................. 16Projection Distance and Lens Shift MaximumValues ............................... 16Connecting a Device ................. 19Removing the Terminal Cover .............. 19Connecting Video Equipment ..............19Connecting a Computer .................. 20Connecting External Equipment............ 20Connecting to the Trigger Out port ........20Connecting WirelessHD devices (EH-TW9400W/EH-TW8400W only)...........20Connecting to the LAN port............. 21Attaching the Wireless LAN unit............21Connecting an HDMI Cable Clamp ........... 22Preparing the Remote Control ........ 23Installing the Remote Control Batteries.......23Remote Control Operating Range ...........24Operating range (left to right) ............ 24Operating range (top to bottom) .......... 24Basic OperationsProjecting Images ................... 25Turning On the Projector.................25If the target image is not projected . . . . . . . . 26Using the Home Screen .................. 26Turning Off ...........................27Adjusting the Projected Image . . . . . . . . 28Displaying the Test Pattern ................ 28Lens Adjustment Function (Focus, Zoom, LensShift) ................................ 28Adjusting the focus ................... 29Adjusting the projection size (ZoomAdjustment) ........................ 29Adjusting the position of the projectedimage (Lens Shift Adjustment)...........30Adjusting the Projector's Tilt ...............31Correcting Keystone Distortion ............. 31Hiding the Image Temporarily .............. 31Adjusting the ImageAdjusting the Image ................. 32Selecting the Projection Quality (Color Mode).................................... 32Switching the Screen Between Full and Zoom(Aspect)............................. 33Adjusting the Sharpness .................. 34Adjusting Image Resolution (ImageEnhancement) ......................... 35Setting Auto Iris ........................ 36Setting Frame Interpolation...............36Adjusting the Color .................. 38Adjusting the Color Temp.................38Adjusting the RGB (Offset and Gain).........38Adjusting Hue, Saturation, and Brightness . . . . . 38Adjusting the Gamma ...................40Select and adjust the correction value......40
Contents4Adjust using the gamma adjustment graph.................................. 40Viewing the Image at the Saved ImageQuality (Memory Function) . . . . . . . . . . . 42Saving a Memory ....................... 42Loading, Deleting, and Renaming a Memory.................................... 42Useful FunctionsEnjoying 3D Images .................. 44Preparing to View 3D Images .............. 44If the 3D image cannot be viewed .........44Using 3D Glasses ....................... 45Warnings Regarding Viewing 3D Images......45Connecting with WirelessHD . . . . . . . . 47Installing the WirelessHD Transmitter........47WirelessHD Transmitter part names ........ 48WirelessHD Transmitter connectionexample and signal flow ................ 49Setting the WirelessHD Transmitter ........ 54Projecting Images ...................... 54WirelessHD Settings Menu................56WirelessHD Transmission Range ............ 57Operating the Remote Control............. 58Remote Control Operating Range ...........58Switching the Input and Output............ 58Switching the target image .............. 59Switching the image source .............60Using the HDMI Link Function ........ 61HDMI Link Function ..................... 61HDMI Link Settings ...................... 61Connecting ........................... 62Using the Projector on a NetworkProjecting Using Wired LAN .......... 63Selecting Wired Network Settings ...........63Projecting Using Wireless LAN ........ 65Selecting Wireless Network Settings Manually.................................... 65Selecting the Computer's Wireless LAN Settings.................................... 67Selecting wireless network settings inWindows ........................... 67Selecting wireless network settings in OS X.................................. 67Setting Up Wireless Network Security . . . . . . . . 68Projecting in Epson iProjection (iOS/Android).................................... 68Operating using a smartphone (remotecontrol function) .....................69Configuration MenuConfiguration Menu Functions ........ 71Configuration Menu Operations............ 71Configuration Menu Table ................72Image menu........................72Signal menu ........................ 74Settings menu ....................... 75Extended menu ...................... 78Network menu ....................... 82Info menu .......................... 86Reset menu ......................... 86TroubleshootingProblem Solving . .................... 87Reading the Indicators ................... 87Indicator status during an error/warning....87Indicator status during normal operation . . . . 89When the Indicators Provide No Help........89Check the problem .................... 89Problems relating to images .............90Problems when projection starts ..........94Problems with the remote control ......... 94Problems with the control panel .......... 94Problems with 3D .................... 95Problems with HDMI ..................95Problems with WirelessHD (EH-TW9400W/EH-TW8400W only) ................... 96Network problems .................... 98About Event ID ........................ 98
Contents5MaintenanceMaintenance . . . . . .................. 100Cleaning the Parts ..................... 100Cleaning the air filter ................. 100Cleaning the main unit ................ 101Cleaning the lens .................... 102Replacement Periods for Consumables...... 102Air filter replacement period ............ 102Lamp replacement period .............. 102Replacing Consumables ................. 102Replacing the air filter ................. 102Replacing the lamp .................. 103Resetting lamp hours ................. 105Panel Alignment .................... 106Color Uniformity ................... 108About PJLink ....................... 110AppendixOptional Accessories andConsumables ....................... 111Optional Items ........................ 111Consumables ......................... 111Supported Resolutions .............. 112PC ................................. 112SD ................................. 112HD ................................ 1134K ................................. 1133D ................................. 1143D Input Signals MHL (via a WirelessHDTransmitter*) ......................... 115WirelessHD Input Signal MHL* .............115Specifications ...................... 116Appearance ........................ 119List of Safety Symbols ............... 120Glossary ........................... 122General Notes ...................... 123Warning Labels ....................... 123General Notice ........................ 124
Introduction6Part Names and FunctionsFront/TopName FunctionaLamp coverOpen when replacing the projector's lamp. s p.103bAir exhaust ventExhaust vent for air used to cool the projector internally.CautionWhile projecting, do not put your face or hands near the air exhaust vent,and do not place objects that may become warped or damaged by heat nearthe vent. Hot air from the air exhaust vent could cause burns, warping, oraccidents to occur.cLens shutterLinks to the projector's power on/off function, and automatically opens and closesthe shutter. s p.25dLensImages are projected from here.eAir intake ventIntake vent for air used to cool the projector internally.Air filter coverWhen replacing the air filter, open this cover and remove the air filter. s p.102fRemote receiverReceives signals from the remote control. s p.24gControl panelOperates the projector. s p.7
Introduction7Control PanelWhen the Illumination function is set to Off, all indicators are off under normal projectionconditions.s Extended - Operation - Illumination p.78Buttons/Indicators FunctionaFlashes to indicate warm-up in progress or cool-down in progress. Shows theprojector's status through a combination of other indicators lit and flashing.s p.87bFlashes orange when it is time to replace the lamp. Shows the projector's errorsthrough a combination of other indicators lit and flashing. s p.87cFlashes orange if the internal temperature is too high. Shows the projector'serrors through a combination of other indicators lit and flashing. s p.87dDisplays and closes the Configuration menu.On the Configuration menu, you can make adjustments and settings for Signal,Image, Input Signal, and so on. s p.71eSelects functions and settings when a menu is displayed. s p.71fControl panel coverCover for the control panel. When you want to use the control panel, grip theknob and slide the cover open. gSelects the adjustment value for the keystone correction and for menu items.s p.31hSelects adjustment values for menu items. s p.71iReturns to the previous menu level when a menu is displayed. s p.71
Introduction8Buttons/Indicators FunctionjChanges the adjustment items for the motorized lens function.The adjustment items are as follows.•Focus s p.29•Zoom s p.29•Lens shift s p.30kChanges to the image from each input port. s p.26lTurns the projector on or off. s p.25Lit when the projector is on. Shows the projector's errors through a combina-tion of other indicators lit and flashing. s p.87
Introduction9Remote ControlThe remote control varies depending on the projector model you are using. This examples in this section arefor the remote control for the EH-TW9400W/EH-TW8400W.Button FunctionaTurns the projector on. s p.25bDisplays and closes the Home screen.s p.26cChanges to the image from each input port.s p.26 is only available for the EH-TW9400W/EH-TW8400W.dPerforms operations such as play, stop, andvolume adjustment for connected devicesthat meet the HDMI CEC standards. s p.61e•When HDMI Link is OnsSettings - HDMI Link - HDMI Link p.75Displays the device connections list.•When HDMI Link is OffsSettings - HDMI Link - HDMI Link p.75Displays the HDMI link settings menu.s p.61fChanges the adjustment items for the motor-ized lens function.The adjustment items are as follows.•Focus s p.29•Zoom s p.29•Lens shift s p.30
Introduction10Button FunctiongSelects menu items and adjustment values.s p.71hThe adjustment value returns to its defaultvalue when pressed while the menu's adjust-ment screen is displayed. s p.71iDisplays and closes the Configuration menu.On the Configuration menu, you can makeadjustments and settings for Signal, Image,and so on. s p.71jSaves, loads, or erases a memory. s p.42kSets the strength for Frame Interpolation.s p.36lAdjusts the hue, saturation, and brightnessfor each RGBCMY color. s p.38mPerforms the function assigned to the userbutton. s p.75n(EH-TW9400W/EH-TW8400W only)This is the button for controlling the Wire-lessHD Transmitter.Turns on the WirelessHD Transmitter, orswitches the input and output.Make sure you point the remote control at theWirelessHD Transmitter when performingoperations. s p.47oChanges the 3D format.This projector supports the following 3D for-mats.•Frame Packing•Side by Side•Top and Bottoms p.44pThe adjustment screen for the dynamic rangeis displayed.s p.74qDisplays and closes the test pattern. s p.28rLoads the lens position registered as Memo-ry1 or Memory2 in the Save Lens Position.s p.42stReturns to the previous menu level when amenu is displayed. s p.71AWhen a menu is displayed, it accepts and en-ters the current selection and moves to thenext level. s p.71
Introduction11Button FunctionBDisplays the Image Enhancement menu.s p.35CChanges the Color Mode. s p.32DSelects the aspect mode according to the in-put signal.s p.33ETemporarily stops projection. To turn the im-age back on, press this button again.s p.31FThe remote control buttons light up for ap-proximately 10 seconds. This is useful whenoperating the remote control in the dark.GTurns the projector off. s p.27
Introduction12RearName FunctionaSecurity slot ( )The security slot compatible with the MicroSaver security system manufac-tured by Kensington. For more details, visit the homepage of Kensington athttp://www.kensington.com/.bPower inletConnect the power cord. s p.25cRemote receiverReceives signals from the remote control. s p.24dOpt.HDMI portConnects the power supply port for the optical HDMI cable. However, con-nection for all the devices is not guaranteed. Make sure to check if your deviceworks beforehand.eHDMI1 portConnects HDMI compatible video equipment and computers.s p.19HDMI1/HDMI2 ports support HDCP 2.2.fHDMI2 portgUSB-A portConnects the optional Wireless LAN unit. It is also used when updating thefirmware. s p.21hService portService port. This is not normally used.iLAN portConnects a LAN cable to connect to a network. s p.21jPC portConnects to the RGB output port on a computer. s p.20kRS-232C portWhen controlling the projector, connect the projector to a computer with anRS-232C cable. This port is for control use and should not normally be used.lTrigger Out portConnects with external devices such as motorized screens. s p.20
Introduction13BaseLENSName FunctionaCeiling mount fixingpointsAttaches the optional ceiling mount here when suspending the projector froma ceiling. s p.111Use the four ceiling mount fixing points for or depending on the in-stallation environment. Use the fixing points when installing next to a wallin a small room.bcdRear footRemove this when using the ceiling mount fixing points.eCable cover fixingscrewScrew holes for attaching the cable cover.fFront adjustable footWhen set up on a surface such as a table, extend the foot to adjust horizontaltilt. s p.31gScrew holes for ana-morphic lensScrew holes for attaching the anamorphic lens.
Preparing14InstallingProjected Image and Position of ProjectorInstall the projector as follows.Installing in parallel with the screenIf the projector is installed at an angle to the screen, keystone distortion occurs in the projected image.Adjust the projector's position so that it is installed in parallel with the screen.cIf the projector cannot be installed in front of the screen, you can adjust the position of the imageby using lens shift. s p.30Installing the projector horizontally by adjusting the height of either sideIf the projector is tilted, the projected image is also tilted.Install the projector horizontally so that both sides are at the same height.If the projector cannot be installed horizontally, you can adjust the projector's tilt with the front foot. s p.31
Preparing15Various Setting MethodsWarning•A special method of installation is required when suspending the projector from a ceiling (ceiling mount). Ifit is not installed correctly, it could fall, causing an accident and injury.•If you use adhesives, lubricants, or oil on the ceiling mount fixing points to prevent screws from loosening,or if you use items such as lubricants or oils on the projector, the outer projector case may crack, which causesit to fall from its ceiling mount. This could cause serious injury to anyone under the projector and also damagethe projector.•Do not set up the projector in locations exposed to high humidity and dust, such as on a kitchen counter, inthe kitchen, or near a humidifier, or in locations exposed to oil smoke or steam. Doing so could cause fire orelectric shock. In addition, the oil content could cause the projector’s outer case to deteriorate and couldcause the projector to fall off from the ceiling where it is suspended.•Do not install it on an unstable shelf or in a place out of load range. Otherwise, it could fall or topple causingan accident and injury.•When installing it in a high position such as on a shelf, take measures against falling by using wires to ensurethe safety in an emergency, such as an earthquake, and prevent accidents. If it is not installed correctly, itcould fall causing an accident and injury.•Do not block the air intake vent and air exhaust vent of the projector. Blocking its air intake vent and airexhaust vent may trap heat inside causing fire.Attention•Do not use the projector installed vertically. Doing so could cause a malfunction.•Clean the air filter once every three months. Clean it more often if the environment is particularly dusty.s p.100Placing on a table and projectingYou can install the projector on a table in your living room or on a low shelf to project images.
Preparing16Suspending from the ceiling and projectingYou can suspend the projector from the ceiling with the optional ceiling mount to project images.cWhen suspending from the ceiling and projecting, set Projection to Front/Ceiling or Rear/Ceiling. s Extended - Projection p.78Projection Distance and Lens Shift Maximum ValuesThe size of the projection increases as the projector is moved away from the screen.Use the table below to setup the projector at the optimum position from the screen. The values given hereare for your reference only.The maximum lens shift adjustment values are shown in the following table.cThe projected image becomes smaller after correcting distortion. Increase the projection distanceto fit the projected image to the screen size.When adjusting the projection position vertically in lens shiftA : Distance from the center of the lens to the bottom edge of the projected image (when lens shift is raisedto its highest level)B : Distance from the center of the lens to the bottom edge of the projected image (when lens shift is loweredto its lowest level)E : Projection distance from the projector to the screenF : Size of the projected image
Preparing17When adjusting the projection position horizontally in lens shiftC : Lens center movement distance when the projector is moved (when lens shift is set to maximum left)D : Lens center movement distance when the projector is moved (when lens shift is set to maximum right)E : Projection distance from the projector to the screenF : Size of the projected imageUnit: cm16:9 Screen Size Projection Distance (E) Lens Shift Maximum Values*F W x H Minimum(Wide)Maximum(Tele)Distance(A)Distance(B)Distance(C, D)50" 111 x 62 148 313 29 91 5260" 133 x 75 178 376 35 109 6380" 177 x 100 239 503 46 146 83100" 221 x 125 300 630 58 182 104150" 332 x 187 452 947 86 273 156200" 443 x 249 604 1264 115 364 209250" 553 x 311 756 1582 144 455 261300" 664 x 374 908 1899 173 547 313*Vertical and horizontal lens shift cannot both be set to their maximum values. s p.30
Preparing18Installation example (with 16:9 screen size and 100")Side viewOverhead view
Preparing19Connecting a DeviceAttention•Make cable connections before connecting to a power outlet.•Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connectorof a different shape into the port, it could cause damage and a malfunction to occur.Removing the Terminal CoverDepending on the model you are using, the projector may have a terminal cover for the connector sectionon the rear to improve the overall appearance of the projector. Remove the terminal cover before connectingany cables.There are gaps at the bottom of the terminal cover that allow you to pull the cover forward and lift it fromthe grooves at the top.When reattaching, first insert the protruding sections into the grooves at the top.Connecting Video EquipmentTo project images from DVD/Blu-ray players, connect to the projector using one of the following methods.When using a commercially available HDMI cablec•To display signals in the 18 Gbps transmission band, such as 4k60p/4:4:4, use a premium HDMI cable.If you use a cable that does not support it, images may not be displayed properly. If you experienceany trouble displaying images at 18 Gbps. change the EDID setting to Normal. sSignal-Advanced-EDID p.74•When using the power supply port for an optical HDMI cable, connect it to the Opt.HDMI port.•HDMI1/HDMI2 ports support HDCP 2.2.•This projector does not have a built-in speaker. Connect the projector to your AV system to listen toaudio from connected equipment.
Preparing20Connecting a ComputerTo project images from a computer, connect the computer using one of the following methods.When using a commercially available computer cableWhen using a commercially available HDMI cableConnecting External EquipmentConnecting to the Trigger Out portTo connect external devices such as motorized screens, connect a mini-jack stereo cable (3.5 mm) to theTrigger Out port. When set to on, a signal (12 V DC) is output from this port to communicate the projector'sstatus (On or Off) to connected devices such as electric screens.cTo use the Trigger Out port, set Trigger Out to Power (EH-TW9400W/EH-TW9400 only) or On (EH-TW8400W/EH-TW8400 only). s Extended - Operation - Trigger Out p.78Connecting WirelessHD devices (EH-TW9400W/EH-TW8400W only)The projector receives transmissions from the WirelessHD Transmitter, and projects the images. s p.47Change the projected image by pressing the button on the remote control or the button on thecontrol panel.c•When receiving WirelessHD images, make sure WirelessHD is set to On. sSettings - WirelessHD -WirelessHD p.75•You can change which device is displayed by selecting a device from Device Connections in HDMILink. sSettings-HDMI Link-Device Connections p.75
Preparing21Connecting Smartphones or TabletsYou can connect MHL compatible smartphones or tablets to the WirelessHD Transmitter. Use an MHLcompatible cable to connect the micro USB port of smartphones and tablets to the HDMI4 port on theWirelessHD Transmitter.You can operate smartphones or tablets from the projector remote control. You can also view video andlisten to music while charging a smartphone or tablet.Attention•Make sure the connection cable supports the MHL standards. During charging, the smartphone or tabletcould generate heat, cause a liquid leak, explode or generate other conditions that could result in a fire.•When a connection is made using an MHL-HDMI conversion adapter, it may not be possible to charge orcontrol the device from the remote control.cSome devices use more power during video playback than what is supplied and will therefore notenable charging during video playback or other operations.Connecting to the LAN portConnect to a network router, a hub, and so on, with a 100BASE-TX or 10BASE-T LAN cable.You can operate the projector or check its status over a network from a computer or a smart device.cTo prevent malfunctions, use a category 5 or higher shielded LAN cable.Attaching the Wireless LAN unitTo use the wireless LAN function, attach an optional Wireless LAN unit (ELPAP10).Connect the Wireless LAN unit to the USB port.
Preparing22You can use one of the following methods to project over wireless LAN. For more details, see the downloadpage.•Projecting four screens simultaneouslyWhen using Epson iProjection (Windows/Mac), you can display up to four separate screens from the projector fromup to 50 computers connected to the network.Download Epson iProjection from the following Web site.http://www.epson.com•Projecting images from a mobile terminal via a networkBy installing Epson iProjection (iOS/Android) on a smartphone or tablet, you can wirelessly project data on yourdevice.s p.68c•When not using the wireless LAN function with the Wireless LAN unit kept inserted, set Wireless LANPower to Off. This can prevent unauthorized access from outsiders. s p.82•When using Epson iProjection in Quick connection mode, we recommend making security settings.s p.84Connecting an HDMI Cable ClampIf the HDMI cable is thick and hangs down, make sure you secure it to the cable holder with an HDMI clampso that the cable's weight does not disconnect it from the port.
Preparing23Preparing the Remote ControlInstalling the Remote Control BatteriesAttention•Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted thecorrect way.•You cannot use other batteries except for the AA size manganese or alkaline.aRemove the battery cover.While pushing the battery compartmentcover catch, lift the cover up.bReplace the old batteries with newbatteries.Check the polarity of the batteries (+) and(-) before installing.cReattach the battery cover.Press the cover until it clicks into place.cIf delays in the responsiveness of theremote control occur or if it does notoperate, it probably means that thebatteries are becoming flat. When thishappens, replace them with newbatteries. Have two AA size manganeseor alkaline batteries ready.
Preparing24Remote Control Operating RangeThe operation range for the WirelessHD Transmitter differs. s p.58Operating range (left to right)10m10m30°30°30°30°Operating range (top to bottom)10m10m30°10°60°30°
Basic Operations25Projecting ImagesTurning On the ProjectoraConnect the equipment to theprojector.bConnect using the power cordsupplied.The projector's power indicator turns blue.This indicates that the projector is receivingpower, but is not yet turned on (it is instandby mode).cTurn on the connected equipment.dPress the button on the remotecontrol or the button on thecontrol panel to turn on the projector.Remote control Control panelThe lens shutter opens, and projectionstarts.The (operation indicator) flashes blueas the projector warms up. Once theprojector is warmed up, the operationindicator stops flashing and turns blue.cWhen Direct Power On is set toOn, you can start projecting bysimply connecting the power cordto the projector without having topress any buttons. s Extended -Operation - Direct PowerOn p.78Warning•Do not look into the lens during projection. Thepowerful light emitted could cause damage toeyesight. Pay close attention to how your childbehaves.•Do not stand in front of the lens during projection.Clothes could be damaged due to the hightemperature.c•This projector provides a Child Lock function to prevent children from accidentally turning the poweron and a Control Panel Lock function to prevent accidental operations and so on. s Settings - LockSetting - Child Lock/Control Panel Lock p.75•This projector provides an Auto Setup function to automatically select the optimum settings when theinput signal for the connected computer image changes. s Signal - Auto Setup p.74•When using at an altitude of 1500 m or more, set High Altitude Mode to On. s Extended - Operation -High Altitude Mode p.78
Basic Operations26If the target image is not projectedIf the image is not projected, you can change the source using one of the following methods.Remote control Control panelPress the button for the target port. Press the button and select the target port.Press the button to confirm the selection.Using the Home ScreenThe Home screen feature allows you to easily select an image source and access useful functions.Press the button on the remote control to display the Home screen.Under the following conditions, the Home screen is displayed automatically when the projector is turned on.•Home Screen Auto Disp. is set to On. s Extended - Home Screen - Home Screen Auto Disp. p.78•There are no signals from any sources.aSelects the source you want to project.bConnection Guide is displayed.cDisplays the Configuration menu. s p.71dPerforms menu options assigned to Home Screen in the Extended menu.sExtended - Home Screen p.78eSets the 3D function. sSignal - 3D Setup p.74fSelects the Color Mode. s p.32
Basic Operations27cThe Home screen disappears after 10 minutes of inactivity.Turning OffaTurn off the connected equipment.bPress the button on the remotecontrol or the button on thecontrol panel.Remote control Control panelA confirmation message is displayed.cPress the button again.Projection ends, and the lens shutter closesautomatically.The operation indicator flashes and theprojector begins to cool down.dWait until cool-down is complete.When cool-down is complete, theoperation indicator stops flashing.eDisconnect the power cord.
Basic Operations28Adjusting the Projected ImageDisplaying the Test PatternWhen adjusting the zoom/focus or the projection position just after setting up the projector, you can displaya test pattern instead of connecting video equipment.Press the button on the remote control to display the test pattern. The standard for horizontal linesat the top and bottom uses 2.40:1 CinemaScope.When you select Color Isolation while projecting images, the color selected from R (red), G (green), or B (blue)is projected (EH-TW9400W/EH-TW9400 only).Press the button again to end the test pattern display.Lens Adjustment Function (Focus, Zoom, Lens Shift)To adjust the focus, zoom, or lens shift, press the button on the remote control or the button onthe control panel, and then select the item you want to adjust.Remote control Control panelThe adjustment items switch as shown in the following table.1Focus adjustment Adjust Focus is displayed on the screen.Adjusts the focus of the projected image. s p.292Zoom adjustment Adjust Zoom is displayed on the screen.Adjusts the size of the projected image. s p.293 Lens shift adjustment Adjust Lens Shift is displayed on the screen.Adjusts the position of the projected image. s p.30To finish making adjustments, press the button in Lens shift adjustment.cYou can register the results of lens adjustment to the memory (Save Lens Position). You can load thelens position that you registered from the remote control or the Configuration menu.
Basic Operations29Adjusting the focusaPress the button on the remote control.Adjust Focus is displayed on the screen.bPress the buttons to adjust the focus.cPress the button three times to finish making adjustments.Adjusting the projection size (Zoom Adjustment)aPress the button on the remote control twice.Adjust Zoom is displayed on the screen.bPress the buttons to adjust the size of the projected screen.cPress the button twice to finish the adjustment.
Basic Operations30Adjusting the position of the projected image (Lens Shift Adjustment)If the projector cannot be installed directly in front of the screen, you can adjust the position of the image byusing lens shift.aPress the button on the remote control three times.Adjust Lens Shift is displayed on the screen.bUse the buttons to adjust the position of the image.You can move the image within the range indicated by the dotted line in the following figure.cTo move the lens position back to the cen-ter, hold the button for at least threeseconds.cPress the button to finish the adjustment.cWhen the following message is displayed when you change to Adjust Lens Shift, the imagemoves in the opposite direction to the direction pressed with the buttons.When Front/Ceiling or Rear/Ceiling is set for Projection, select Inverted. s Extended -Projection p.78Caution•When transporting the projector, set the lens position to the center. If you transport the projector when thelens is not in the central position, the lens shift mechanism could be damaged.•Do not put your finger in the moving parts of the projector's lens. Otherwise an injury could occur.c•When you cannot install the projector directly in front of the screen, it is recommended that you uselens shift to adjust the projection position.•If finely adjusting the lens shift does not work, press briefly on the arrow buttons to perform minuteadjustments while viewing the image.
Basic Operations31Adjusting the Projector's TiltIf the projected image is horizontally tilted (the left and right sides of the projected image are at differentheights) when the projector is setup on a table, adjust the front foot so that both sides are level with each other.Correcting Keystone DistortionYou can use the buttons on the control panel to correct keystone distortion.Open the control panel cover at the side to operate the control panel. s p.7Press the or buttons to display the adjustment gauges.When the gauges are displayed, press the and buttons to perform vertical correction.When the top or bottom is too widec•When you correct keystone distortion, the projected image may be reduced. Increase the projectiondistance to fit the projected image to the screen size.•You can make keystone settings from the Configuration menu. s Settings - Keystone p.75•You can make effective corrections within a projection angle of 30° top to bottom.Hiding the Image TemporarilyYou can use this to temporarily hide the image on the screen.Press the button to show or hide the image.cFor movies, because the movie continues to play even when it is hidden, you cannot return to thepoint at which you hid the image using the button.
Adjusting the Image32Adjusting the ImageSelecting the Projection Quality (Color Mode)You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of theimage varies depending on the mode selected.aPress the button.c•You can make settings from the Configuration menu. s Image - Color Mode p.72•If you press the button, you can also make settings from the Home screen.s p.26bSelect Color Mode.Use the buttons to select a mode, and then press the button to confirm theselection.Choices when projecting 2D imagesMode ApplicationDynamicThis is the brightest mode. Best for prioritizing brightness.Bright CinemaBest for projecting vivid images.NaturalBest for faithfully reproducing the color of the source image.We recommend selecting this mode when performing color adjustment for the image.s p.38CinemaBest for enjoying content such as movies.Digital CinemaProjects images in the Digital Cinema color space. Best for prioritizing colors.Choices when projecting 3D imagesMode Application3D DynamicA dedicated 3D mode best for prioritizing brightness.3D CinemaA dedicated 3D mode best for enjoying content such as movies.
Adjusting the Image33Switching the Screen Between Full and Zoom (Aspect)You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projectedimage.The available settings vary depending on the image signal currently being projected.cNote that using the aspect ratio function of the projector to reduce, enlarge, or split the projectedimage for commercial purposes or for public viewing may infringe upon the rights of the copyrightholder of that image based on copyright law.aPress the button.cYou can make settings from theConfiguration menu. s Signal -Aspect p.74bUse the buttons to selectthe setting name, and then press the button to confirm the selection.cYou may not be able to change the Aspect depending on the input signal.By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if youwant to use a different aspect.The table below shows the image projected on a 16:9 screen.Input Image Setting NameNormal Full Zoom4:3 Images16:9 Images*1Images Recorded UsingSqueezeLetterbox Images*2
Adjusting the Image34Input Image Setting NameNormal Full ZoomNotesMatches the vertical size ofthe projection panel. Theaspect ratio differs de-pending on the input im-age.Uses the entire projectionpanel. The aspect ratio dif-fers depending on the in-put resolution.Retains the aspect ratio ofthe input signal, andmatches the horizontalsize of the projection pan-el. The top and bottom ofthe image may be trunca-ted.*1 The full and zoom used for 16:9 signal input cannot be used for 4K and 3D signals, as well as for the PC imagesignal.*2 The letterbox image used in this explanation is a 4:3 aspect ratio image displayed in 16:9 with black margins atthe top and bottom for subtitle placement. The margins at the top and bottom of the screen image are usedfor subtitles.For EH-TW9400W/EH-TW9400, you can also set Anamorphic Wide and Horiz. Squeeze.Set Anamorphic Wide and attach a commercially available anamorphic lens to enjoy DVDs, Blu-rays, and soon of images recorded at Cinema Scope size.Horiz. Squeeze stretches the horizontal aspect of the input signal. This allows you to project across the fullwidth of the screen when using a commercially available anamorphic lens.c•If Anamorphic Wide is selected when Overscan is set, the image may be truncated. Set Overscan toOff.s Signal-Overscan p.74•When projecting 3D images in Anamorphic Wide, only 1080p/24 Hz/frame packing signals aresupported.•When a 4K image signal is being input, you can only select Normal, Anamorphic Wide, and Horiz.Squeeze.Adjusting the SharpnessYou can make the image clearer.The following shows the setting items and procedures.StandardEnhances the outlines for the projected image overall. When you adjust Stand-ard, the adjustment values for Thin Line Enhancement and Thick Line En-hancement are also adjusted.Thin Line EnhancementDetails such as hair and patterns on clothing are enhanced.Thick Line EnhancementRough parts such as outlines for entire subjects or the background are enhanced,making the overall image clearer.aPress the button.The Configuration menu is displayed.bSelect Image - Sharpness.The Sharpness adjustment screen isdisplayed.
Adjusting the Image35cUse the buttons to selectthe item, and then use the buttons to make the adjustments.The image is enhanced when moved to theright (positive) and softer when moved tothe left (negative).Press the button to return theadjustments to their default values.dPress the button to exit themenu.Adjusting Image Resolution (Image Enhancement)You can adjust the resolution of the image using the Image Enhancement function.The following content can be adjusted.4K Enhancement4K Enhancement is a function that projects an image at a doubled res-olution by diagonally shifting 1 pixel in increments of 0.5 pixels.A high-resolution image signal is projected in fine detail.Image Preset ModeSelect the settings prepared in advance as the settings for Noise Re-duction, MPEG Noise Reduction, Super-resolution, and Detail En-hancement.Noise Reduction(This can be specified only when Image Processing is set to Fine.)Smoothes out rough images.MPEG Noise Reduction(This can be specified only when Image Processing is set to Fine.)You can reduce dot and block noise that occurs in outlines when pro-jecting MPEG movies.Super-resolutionFine Line Adjust: Enhances the contrast and the outlines of complicatedimages.Soft Focus Detail: Enhances the contrast and the outlines for smoothbackgrounds.Detail EnhancementEnhances the contrast in an image to create a more emphatic textureand material feel.Strength: The larger the value, the stronger the contrast.Range: The larger the value, the wider the range of detail enhancementbecomes.
Adjusting the Image36aPress the button.cYou can make settings from theConfiguration menu. s Image -Image Enhancement p.72bUse the buttons toselect the item you want to adjust, andthen press the button to confirmthe selection.cUse the buttons to makeadjustments.Press the button to adjust anotheritem.Press the button to return theadjustments to their default values.dPress the button to exit themenu.Setting Auto IrisBy automatically setting the luminance according to the displayed image, you can enjoy deep and rich images.You can select the luminance adjustment tracking for changes in brightness in the displayed image fromNormal to High Speed.Press the button to display menus in the followingorder.Image - Auto IrisUse the buttons to select the item, and thenpress the button to confirm the selection.cDepending on the image, you may hear the Auto Iris operating, but this is not a malfunction.Setting Frame InterpolationYou can play fast moving images smoothly by automatically producing intermediate frames between theoriginal frames.Frame Interpolation is available under the following conditions.•When Image Processing is set to Fine. s Signal - Advanced - Image Processing p.74•When the source is HDMI1, HDMI2, or WirelessHD (EH-TW9400W/EH-TW8400W only).
Adjusting the Image37•When inputting 2D signals* or 3D signals (1080p 24 Hz). s p.112* This is unavailable when a 4K signal is being input. This is enabled only when 4K Enhancement is set to On and1080p 24 Hz signals are being input.s Image - Image Enhancement - 4K Enhancement p.72aPress the button.cYou can make settings from theConfiguration menu. s Image -Frame Interpolation p.72bUse the buttons toselect the item, and then press the button to confirm the selection.
Adjusting the Image38Adjusting the ColorAdjusting the Color Temp.You can adjust the overall tint of the image. Make adjustments if the image is a little too blue or too red andso on.Press the button to display menus in the followingorder.Image - Color Temp. - Color Temp.Use the buttons to make adjustments.Blue tints grow stronger as the value is increased, and redtints grow stronger as the value is reduced.cPress the button to return the adjustments to their default values.Adjusting the RGB (Offset and Gain)You can adjust the brightness of dark areas (Offset) and bright areas (Gain) for R (red), G (green), and B (blue).Press the button to display menus in the followingorder.Image - Color Temp. - CustomizedUse the buttons to select the item, and thenuse the buttons to make the adjustments. The imagebecomes brighter when moved to the right (positive) anddarker when moved to the left (negative).OffsetWhen the image is made brighter, shading for the darker sections is more vividly expressed.When the image is made darker, the image appears more full-bodied but shading for thedarker sections is harder to distinguish.GainWhen the image is made brighter, the bright sections become whiter and shading is lost.When the image is made darker, shading for the bright sections is more vividly expressed.cPress the button to return the adjustments to their default values.Adjusting Hue, Saturation, and BrightnessYou can adjust the hue, saturation, and brightness for each of the R (red), G (green), B (blue), C (cyan), M(magenta), and Y (yellow) colors.HueAdjusts the overall color of the image to be blue, green, or red.SaturationAdjusts the overall vividness of the image.BrightnessAdjusts the overall color brightness of the image.
Adjusting the Image39aPress the button.cYou can make settings from theConfiguration menu. s Image -Advanced - RGBCMY p.72bUse the buttons toselect the color you want to adjust,and then press the button toconfirm the selection.cUse the buttons toselect Hue, Saturation, orBrightness.dUse the buttons to makeadjustments.Press the button to adjust anothercolor.Press the button to return theadjustments to their default values.ePress the button to exit themenu.
Adjusting the Image40Adjusting the GammaYou can adjust slight coloration differences that may occur due to the device being used when the image isdisplayed.You can set it by using one of the following three methods.•Select and adjust the correction value•Adjust using the gamma adjustment graphSelect and adjust the correction valueaPress the button to displaymenus in the following order.Image - Advanced - GammabUse the buttons toselect the correction value, and thenpress the button to confirm theselection.The larger the value, the lighter the darkportions of the image become, but brightareas may appear discolored. The upperpart of the gamma adjustment graphbecomes rounded.The smaller the value, the darker the brightportions of the image become. The lowerpart of the gamma adjustment graphbecomes rounded.c•The horizontal axis of the gamma adjustment graph shows the input signal level, and the vertical axisshows the output signal level.•Select Reset to return the adjustments to their default values.Adjust using the gamma adjustment graphSelect a tone point on the graph and make adjustments.aPress the button to displaymenus in the following order.Image-Advanced-Gamma-Customized
Adjusting the Image41bUse the buttons to select thetone you want to adjust from thegraph.cUse the buttons toadjust the brightness, and then pressthe button to confirm theselection.
Adjusting the Image42Viewing the Image at the Saved Image Quality(Memory Function)Saving a MemoryBy using the memory function, you can register the following adjustment values, and then load them whennecessary.•Image setting from the Configuration menu•Adjustment values for Lens Adjustment Function (Focus, Zoom, Lens Shift, Blanking) s p.28aMake the settings or adjustments youwant to register.bPress the button.cUse the buttons toselect Save Memory or Save LensPosition, and then press the button to confirm the selection.Save Memory: Registers the ImagesettingsSave Lens Position: Registers theadjustment value for the lens adjustmentfunctiondUse the buttons toselect the memory name to be saved,and then press the button toconfirm the selection.The current projector settings are saved tothe memory.If the mark on the left of the memory nameis turned aqua, it means the memory hasalready been registered. When you select aregistered memory, a message is displayedasking you to confirm that you want tooverwrite the memory. If you select Yes, theprevious content is erased and the currentsettings are saved.Loading, Deleting, and Renaming a MemoryYou can load, delete, and rename registered memories.Press the button, and then select the target function on the screen displayed.c•Press the buttons on the remote control to load the lens position from the Save LensPosition registered in Memory1 or Memory2.•The position of the lens when loading the memory and the position of the lens when the memory isregistered may not be exactly the same.
Adjusting the Image43Function ExplanationLoad MemoryLoads the saved memory. When you select a memory and press the button, the settings applied to the current image are replaced with thesettings from the memory.Erase MemoryErases the registered memory. When you select a memory name and pressthe button, a message is displayed. Select Yes, and then press the button to erase the selected memory.Rename MemoryChanges the memory name. Select the memory name you want tochange, and then press the button. Enter the memory name usingthe soft keyboard. s p.83When you have finished, move the cursor over Finish, and then press the button.Load Lens PositionLoads the registered lens position memory. When you select the lens po-sition name and press the button, the adjustment value for the se-lected lens position memory is applied.Erase Lens PositionErases the registered lens position memory. When you select a lens posi-tion name and press the button, a message is displayed. Select Yes,and then press the button to erase the selected lens position memory.Rename Lens PositionChanges the lens position memory name. Select the lens position memoryname you want to change, and then press the button. Enter the lensposition memory name using the soft keyboard. s p.83When you have finished, move the cursor over Finish, and then press the button.
Useful Functions44Enjoying 3D ImagesPreparing to View 3D ImagesTo view 3D images, be sure to prepare a pair of commercially available 3D Glasses with an active shuttersystem that supports radio waves (RF/Bluetooth) communication system in advance.Check the following before viewing 3D images.•When the source is HDMI1, HDMI2, or WirelessHD (EH-TW9400W/EH-TW8400W only).•Set 3D Display to Auto or 3D.When this is set to 2D, change to Auto or 3D. s Signal - 3D Setup - 3D Display p.74•Pair 3D Glasses.This projector supports the following 3D formats.•Frame Packing•Side by Side•Top and BottomIf the 3D image cannot be viewedThe projector automatically projects a 3D image when detecting a 3D format.Some 3D TV broadcasts may not contain 3D format signals. If this happens, follow the steps below to set the3D format.aPress the button to displaymenus in the order Signal - 3D Setup.bSet 3D Display to 3D.cPress the button to set the 3Dformat on the AV device.c•If you are using a device or cable that does not support 3D images, 3D projection cannot be performed.•For details on 3D format settings on the AV device, see the documentation supplied with the AV device.•When the 3D format has not been correctly set up, an image will not be correctly projected as shownbelow.•If a 3D image is not projected correctly even when a 3D format is set, the synchronization timing forthe 3D Glasses may be inversed. Inverse the synchronization timing using Inverse 3DGlasses.s Signal - 3D Setup - Inverse 3D Glasses p.74•How a 3D image is perceived varies depending on the individual.•When you start projecting a 3D image, a warning about viewing 3D images is displayed. You can turnoff this warning by setting 3D Viewing Notice to Off. s Signal - 3D Setup - 3D Viewing Notice p.74•During 3D projection, the following Configuration menu functions cannot be changed.Aspect (set to Normal), Noise Reduction (set to Off), Overscan (set to Off), 4K Enhancement, Super-resolution, Image Processing•How the 3D image is viewed may change depending on the temperature of the surroundings and howlong the lamp has been used. Refrain from using the projector if the image is not projected normally.
Useful Functions45Using 3D GlassesYou can view 3D images by using a pair of commercially available 3D Glasses (with an active shutter systemthat supports radio waves (RF/Bluetooth) communication system).To view 3D images, you first need to pair the 3D Glasses with the projector. See the User's Guide suppliedwith your 3D Glasses for more information.Warnings Regarding Viewing 3D ImagesNote the following important points when viewing 3D images.CautionViewing Time•When viewing 3D images, always take periodic breaks during extended viewing.Long periods of viewing 3D images may cause eye fatigue.The amount of time and frequency of such breaks varies from person to person. If your eyes still feel tired oruncomfortable even after taking a break from viewing, stop viewing immediately.CautionWatching 3D Images•If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately.Continuing to view the 3D images could cause you to feel unwell.•When viewing 3D images be sure to always wear 3D Glasses. Do not attempt to view 3D images without 3DGlasses.Doing so could cause you to feel unwell.•Do not place any breakable or fragile objects around you when using 3D Glasses.3D images may cause you to move your body involuntarily, resulting in damage to nearby items or personalinjury.•Only wear 3D Glasses when viewing 3D images. Do not move around while wearing 3D Glasses.Your vision may appear darker than normal, causing you to fall or injure yourself.•Try to stay as level with the viewing screen as possible when viewing 3D images.Viewing 3D images at an angle reduces the 3D effect and may cause you to feel unwell due to unintendedcolor changes.•If using 3D Glasses in a room with fluorescent or LED lighting, you may see flashing or flickering throughoutthe room. If this should occur, reduce the lighting until the flickering goes away or turn off the lights completelywhen viewing 3D images. In some very rare cases, this flickering could trigger seizures or fainting for someindividuals. If you begin to feel uncomfortable or unwell at any time when viewing 3D images, stopimmediately.•Stay at least three times the height of the screen away from the screen when viewing 3D images.The recommended viewing distance for an 80-inch screen is at least 3 meters, and at least 3.6 meters for a100-inch screen.Sitting or standing any closer than the recommended viewing distance may result in eye fatigue.
Useful Functions46CautionHealth Risks•You should not use 3D Glasses if you are sensitive to light, have a heart condition, or are unwell.Doing so could aggravate your pre-existing conditions.CautionRecommended Age of Use•The minimum recommended age to view 3D images is six years old.•Children under the age of six are still developing and viewing 3D images may cause complications. Consultyour doctor if you have any concerns.•Children viewing 3D images through 3D Glasses should always be accompanied by an adult. It is often difficultto tell when a child is feeling tired or uncomfortable, which could result in them feeling suddenly unwell.Always check with your child to ensure that they are not experiencing any eye fatigue during viewing.
Useful Functions47Connecting with WirelessHD Installing the WirelessHD TransmitterYou can use the supplied WirelessHD Transmitter to wirelessly receive image and sound data.This is useful when the projector cannot be setup near your AV devices as you can connect the devices to theprojector without using cables.You can use the WirelessHD Transmitter in the following ways.•You can connect up to four AV devices at the same time, and switch images using the remote control.•As well as the projector, you can connect another monitor device, such as a television, to the HDMI Out port, andthen switch the output using the remote control.•This allows other monitor devices such as TVs connected to the HDMI Out port to project images from the connectedAV device, even if the projector is off.•You can connect smart devices and tablets that support MHL, and then project images from the connected MHLdevice. You can also operate MHL devices from the projector's remote control, as well as charge the MHL device.•You can split the HDMI signal that is being input into the WirelessHD Transmitter into image and audio, and outputto other devices.•Even for AV devices that do not support HDCP 2.2, you can output audio by connecting to the HDMI Out port on theWirelessHD Transmitter.
Useful Functions48WirelessHD Transmitter part namesFront RearName Functionat buttonTurns the transmitter on or off.This performs the same function as the button for the WirelessHDTransmitter control on the lower section of the remote control.b buttonChanges to the image from each input port.This performs the same function as the button for the WirelessHDTransmitter control on the lower section of the remote control.c buttonSwitches the output image to the projector or the device connected to theHDMI Out port.This performs the same function as the button for the WirelessHDTransmitter control on the lower section of the remote control.dMain power switchTurns the main power for the transmitter on or off.eAC adapter portConnects the AC adapter.fHDMI Out portConnects to a monitor device, such as a television. You can switch the outputimage using the button on the remote control or the buttonon the WirelessHD Transmitter.gOptical Audio-Out portConnects to an audio device equipped with an optical digital audio inputport.hHDMI Input portConnects to the AV device you want to playback. You can switch the inputimage using the Input button.The HDMI4 port of the unit meets the MHL standards. You can play contentfrom MHL compatible smart devices or tablets connected with an MHL ca-ble.i3D Glasses charging portConnects a USB cable to charge the 3D Glasses.jSetup buttonThis is the button on the back of the WirelessHD Transmitter.This is a paring button for changing devices. Do not use this button undernormal circumstances since this transmitter is already configured before theshipment.kOn/Standby indicator(blue)This flashes while the WirelessHD Transmitter is starting up, and remains litwhile operating.
Useful Functions49Name FunctionlWiHD indicator (blue)Indicates the communication status for the WirelessHD.•Lit when wirelessly transmitting images to the projector.•Off when outputting to the HDMI Out port.mLink indicator (blue)Indicates the connection status with the projector.•Turns on when connected to the projector.•Flashes when searching for a projector.•Flashes slowly when standing by in power saving status.nTV indicator (blue)Lit when a monitor device such as a TV is selected as the output.oHDMI1 to 4 indicators(blue)The indicator for the source currently being projected is lit.WirelessHD Transmitter connection example and signal flowc•The antennas are built-into the front of the projector and the WirelessHD Transmitter. Make sure theantennas face each other (face the front) when setting up the devices.Also, do not place any object over the front side of the projector and WirelessHD Transmitter.•Place the WirelessHD Transmitter on a level surface facing towards the projector.•You can view the signal strength from the WirelessHD settings menu. s Settings - WirelessHD -Video Reception p.75•When outputting audio from devices connected to the Optical Audio-Out port or the HDMI Out port,set the output audio in Audio Out Device. s p.61•You can output images from the projector or a monitor device such as TV. You can switch the outputimage using the button on the remote control or the button on the WirelessHDTransmitter.s p.59•When inputting images from HDMI Input1 or HDMI Input2 port, if noise is generated by monitors suchas televisions or if the audio is lost, try connecting to the HDMI Input3 or HDMI Input4 port.•This projector cannot transmit signals in the 18 Gbps transmission band such as 4K60p/4:4:4 using awireless network.
Useful Functions50Connection example 1: Viewing without an AV amplifier (audio is output from the Optical Audio-Out port)Audio is output from the sound bar connected to the Optical Audio-Out port. Use a commercially availableoptical digital cable to connect to the sound bar.c•When connecting a device, such as a sound bar, to the Optical Audio-Out port on the WirelessHDTransmitter, check that Audio Out Device is set to WiHD Transmitter (Optical). sSettings - HDMILink - Audio Out Device p.75•The following conditions mus t b e m et wh en y ou w an t t o o ut pu t i m ag e s f ro m m on it or de v ic e s i nc lu di ngTVs that support 18 Gbps transmission band, such as 4k60p/4:4:4.- Connect the monitor device to the HDMI Out port with a Premium HDMI cable.- Connect the AV device to the HDMI Input1 or HDMI Input2 port.•You cannot output some audio from the Optical Audio-Out port due to restrictions in audio standards*.- Lossless audio- Lossy high-bandwidth audio- Immersive audio* This is the specifications as of June 2018. This will be changed in the future.
Useful Functions51Connection example 2: Viewing without an AV amplifier (audio is output from the HDMI Out port)Audio is output from the sound bar and so on connected to the HDMI Out port. In this situation, you can evenoutput audio from AV amplifiers or sound bars that do not support HDCP 2.2.cWhen connecting a device, such as a sound bar, to the HDMI Out port on the WirelessHDTransmitter, check that Audio Out Device is set to WiHD Transmitter (HDMI). s Settings - HDMILink - Audio Out Device p.75
Useful Functions52Connection example 3: Viewing with a connected AV amplifierConnect using an AV amplifier.Audio is output from the AV amplifier.
Useful Functions53Connection example 4: Viewing with a connected smart deviceConnect an MHL cable to the HDMI4 port.
Useful Functions54Setting the WirelessHD TransmitteraSet up the WirelessHD Transmitterconnected to the projector so thatthey are facing each other. s p.47c•The antennas are built-into thefront of the projector and theWirelessHD Transmitter. Makesure the antennas face each other(face the front) when setting upthe devices.Also, do not place any object overthe front side of the projector andWirelessHD Transmitter.•Place the WirelessHDTransmitter on a level surfacefacing towards the projector.bConnect the WirelessHD Transmitterto an electrical outlet using thesupplied AC adapter.cUsing an HDMI cable, connect the AVdevice you want to use to the Inputport on the WirelessHD Transmitter.You can connect up to four multi-mediaplayers.c•You can connect another monitor device, such as a television, to the HDMI Out port on the WirelessHDTransmitter. You can switch between output images using the remote control. s p.59•The HDMI4 port of the WirelessHD Transmitter supports the MHL input signal. You can play contentfrom MHL compatible smart devices or tablets connected with an MHL cable.•If the following message is displayed when you connect an MHL device, the device has been connectedto a port other than the HDMI4 port, or the connected device is not compatible with MHL."No Signal"•You can use the HDMI link function even when using the WirelessHD Transmitter. s p.61Projecting ImagesaStart playback on the AV device, and then turn on the projector and the WirelessHDTransmitter.The On/Standby indicator on the WirelessHD Transmitter turns on.

Navigation menu