Seiko Epson AE-WLU5630 WLAN / BT Module User Manual Install

Download:
Mirror Download [FCC.gov]
Document ID	4194144
Application ID	eBqFZ/y725AaQqgvGnr6Qw==
Document Description	User Manaul
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.75kB (359324 bits)
Date Submitted	2019-03-07 00:00:00
Date Available	2019-03-08 00:00:00
Creation Date	2019-02-28 10:33:32
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2019-02-28 10:33:42
Document Title	Install
Document Creator	Acrobat PDFMaker 15 Word 版
Document Author:	Teddy Ho

Seiko Epson Corporation
WLAN / BT Module / WLU5630B-D101(RoHS)
OPERATION MANUAL
Install driver
Connect WLU5630B-D101(RoHS) with cable to host device, and install drive.
In Linux system, execute Terminal with Superuser permission (sudo su)
Permission, goto “init.sh” folder, and execute “./init.sh” to enable driver.
Access to WiFi & Bluetooth service:
Follow Host device instruction to connect/access Wireless/Bluetooth service.
Regulatory statement
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Canada/ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes canaux;
The transmitter module may not be co-located with any other transmitter or antenna.
Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
The Country Code Selection feature is disabled for products marketed in the US/Canada
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être
exploités. Sélection d'autres canaux n'est pas possible.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de
distance entre la source de rayonnement et votre corps.
This module is intended for OEM integrators under the following conditions:
FCC: This module is certified pursuant to two Part 15 rules sections (15.407, 15.247).
Canada/ISED: This module is certified pursuant to RSS-247 rules sections.
This module has been approved to operate with the antenna types listed below, with the maximum
permissible gain indicated.
FCC, ISED Antenna Information
Antenna
Antenna
Antenna
Frequency Band
Antenna Type
Model Number
2400-2483.5MHz
5150-5250MHz
5725-5850MHz
2400-2483.5MHz
5150-5250MHz
5725-5850MHz
2400-2483.5MHz
(BT)
Printed
Antenna
WLU5630B-D101(Ro
HS)
Gain
(dBi)
1.92
1.42
2.21
2.22
2.11
2.00
2.22
The OEM integrator is still responsible for
1. ensuring that the end-user has no manual instructions to remove or install module
2. the FCC/ISED compliance requirement of the end product, which integrates this
module.
Information on test modes and additional testing requirements
1. This module is restricted to integration into hosts for indoor use only.
2. This module has been approved under stand-alone configuration.
3. OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz
band.
4. The separate approval is required for all other operating configurations, including
portable configurations with respect to Part 2.1093 and different antenna
configurations
5. The information on how to configure test modes for host product evaluation for
different operational conditions for a stand-alone modular transmitter in a host,
versus with multiple, simultaneously transmitting modules or other transmitters in a
host can be found at KDB Publication 996369 D04.
Additional testing, Part 15 Subpart B disclaimer
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations
(e.g. SDoC) of the host product to be addressed by the integrator/manufacturer.
This module is only FCC authorized for the specific rule parts 15.247, 15.407 listed on the grant, and the
host product manufacturer is responsible for compliance to any other FCC rules that apply to the host
product as being Part 15 Subpart B compliant.
NCC Statement
1.
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
2.
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低
功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
3.
本模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求平台廠商於平台上標示
「本產品內含射頻模組 CC XX xx LP yyy Z z 」
。
4.
「本公司於說明書中提供所有必要資訊以指導使用者/安裝者正確的安裝及操作」
。
5.
無線資訊傳輸設備避免影響附近雷達系統之操作。
Regulatory statement (for end-product)
Label of the end product:
FCC:
The host product must be labeled in a visible area with the following " Contains FCC ID:
BKMAE-WLU5630".
Canada/ISED:
The final end product must be labeled in a visible area with the following: “Contains IC: 1052D-WLU5630”.
Taiwan/NCC
本模組於取得認證後將依規定於模組本體標示審驗合格標籤，並要求平台廠商於平台上標示「本產
品內含射頻模組 CC XX xx LP yyy Z z 」。
The user manual of the end product:
FCC:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or
transmitter.
Canada/ISED:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour
utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20cm est respectée entre l'antenne et les
utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Taiwan/NCC
1.
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
2.
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低
功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
3.
無線資訊傳輸設備避免影響附近雷達系統之操作。

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Teddy Ho
Comments                        : 
Company                         : askey
Create Date                     : 2019:02:28 10:33:32+08:00
Modify Date                     : 2019:02:28 10:33:42+08:00
Source Modified                 : D:20190228023003
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2019:02:28 10:33:42+08:00
Creator Tool                    : Acrobat PDFMaker 15 Word 版
Document ID                     : uuid:20f0502e-d322-4103-9572-9d502af5b3b5
Instance ID                     : uuid:496da7c9-1ab2-4c12-addd-106990fb764e
Format                          : application/pdf
Title                           : Install
Description                     : 
Creator                         : Teddy Ho
Producer                        : Adobe PDF Library 15.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 9

EXIF Metadata provided by EXIF.tools