Seiko Epson FBM224B Bluetooth Interface Board User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1380889
Application ID	pyVOag691oSeGE2vuW48tg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6kB (74973 bits)
Date Submitted	2010-11-24 00:00:00
Date Available	2010-11-24 00:00:00
Creation Date	2010-11-11 20:49:57
Producing Software	PrimoPDF
Document Lastmod	2010-11-11 20:49:57
Document Title	Microsoft Word - Bluetooth Interface Board Users Manual.doc
Document Creator	PrimoPDF http://www.primopdf.com/
Document Author:	0086097

Bluetooth Interface Board User’s Manual
Features
The Bluetooth Interface board has the following features:
1) A built-in Bluetooth module
2) Bluetooth 2.1+EDR compatible
3) Power class: Class 2
4) External dimensions: 50 mm × 70 mm
Manufacturer: Seiko Epson Corporation
Model Name: M224B
Product Name: Bluetooth Interface board for printer
Integration to the end product
The Bluetooth Interface Board has to be installed and used in accordance with the technical
description/installation instructions provided by the manufacturer.
The system may only be implemented in the configuration that was authorized. Note that
any changes or modifications to this equipment not expressly approved by the manufacturer
could void the user’s authority to operate this equipment.
Regulatory Information
USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
Bluetooth Interface Board User’s Manual 1
If this equipment does cause harmful interference to radio or television reception, which can
be determined by tuning the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Labelling
The Bluetooth Interface board labelled as below.
FCC ID:BKMFBM224B
The proposed FCC ID label format is to be placed on the module. If FCC ID is not visible
when the module is installed into the system, “Contains FCC ID: BKMFBM224B” shall be
placed on the outside of final host system.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons. This
device must not be co-located or operating in conjunction with any other antenna or
transmitter.
Bluetooth Interface Board User’s Manual 2
Canada-Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of this device.
L ‘ utilization de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
The term “IC” before the equipment certification number only signifies that the Industry
Canada technical specifications were met.
Caution: Exposure to Radio Frequency Radiation.
To comply with IC RF exposure compliance requirements, a separation distance of at least
20 cm must be maintained between the antenna of this device and all persons. This device
must not be co-located or operating in conjunction with any other antenna or transmitter.
Instructions to OEM Integrators
A User manual provided to the end user must indicate the operating requirements and
conditions that must be observed to ensure compliance with the above-mentioned FCC /IC
RF Exposure guideline.
If this module is intended for use in a portable device, integrators are responsible for
separate evaluation and/or approval to satisfy FCC/IC RF Exposure requirements.
If other radio devices are to be integrated with this module, an additional evaluation and
FCC/IC submission may be required. Integrators are responsible for such additional
evaluation and FCC/IC submission.
Bluetooth Interface Board User’s Manual 3
Labelling
The Bluetooth Interface board labelled as below.
IC: 1052C-M224B
The proposed IC ID label format is to be placed on the module. If IC ID is not visible when the
module is installed into the system, “Contains IC: 1052C-M224B” shall be placed on the outside of
final host system.
Bluetooth Interface Board User’s Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Creation Date--Text             : D:2010111120495709'00'
Producer                        : PrimoPDF
Mod Date--Text                  : D:2010111120495709'00'
Format                          : application/pdf
Creator                         : 0086097
Title                           : Microsoft Word - Bluetooth Interface Board Users Manual.doc
Creator Tool                    : PrimoPDF http://www.primopdf.com/
Modify Date                     : 2010:11:24 14:13:12+09:00
Metadata Date                   : 2010:11:24 14:13:12+09:00
Document ID                     : uuid:b5359e3a-72d8-4979-b971-db41d975eb1b
Instance ID                     : uuid:88fe5ba5-b857-4bf4-bea7-d48fce011f1b
Page Count                      : 4
Create Date                     : 2010:11:11 20:49:57
Author                          : 0086097

EXIF Metadata provided by EXIF.tools