Seiko Epson FBWLU3090 2.4GHz Wireless LAN MINI USB module User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1087676
Application ID	bLhvP0qCIIdQvha1Jp4cmg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.27kB (453339 bits)
Date Submitted	2009-03-30 00:00:00
Date Available	2009-03-30 00:00:00
Creation Date	2009-03-30 11:09:40
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-03-30 11:09:40
Document Title	Microsoft Word - WLU3090-D69_User Manual_3rd revision.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Daveg

Seiko Epson Corporation
2.4GHz Wireless LAN MINI USB module
WLU3090-D69(RoHS)
OPERATION MANUAL
Install driver
Copy “2.2.29_Drivers” folder C:\
When module connect with NB or PC, it needs driver please load
“2.2.29_Drivers\usb4315\RAPTOR_REL_4_216_41\Bcm_DriverOnly\”
Linking to Networks
View Available Wireless Networks
USA - Federal Communications Commission (FCC)
FCC Radiation Exposure Statement
CAUTION:
„ The radiated output power of 2.4GHz Wireless LAN MINI USB module
devices is far below the FCC radio frequency exposure limits.
Nevertheless, 2.4GHz Wireless LAN MINI USB module devices should be
used in such a manner that the potential for human contact during normal
operation is minimized. To avoid the possibility of exceeding the FCC
radio frequency exposure limits, you should keep a distance of at least 20
cm between you (or any other person in the vicinity) and the antenna that
is built into the notebook.
Interference Statement
These devices comply with Part 15 of the FCC Rules. Operation of the devices
is subject to the following two conditions: (1) The devices may not cause
harmful interference, and (2) The devices must accept any interference that
might cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If the equipment is not installed and used in accordance with
the instructions, the equipment might cause harmful interference to radio
communications. There is no guarantee, however, that such interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception (which can be determined by
turning the equipment off and on), the user is encouraged to try to correct the
interference by taking one or more of the following measures:
„
„
„
Relocate this device.
Increase the separation between the device and the receiver.
Connect the device into an outlet on a circuit different from that of other
electronics.
„
Consult the dealer or an experienced radio technician for help.
Canada. Industry Canada (IC)
This device complies with RSS210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
CAUTION: Exposure to Radio Frequency Radiation. The installer of this radio
equipment must ensure that the antenna is located or pointed such that it does
not emit RF field in excess of Health Canada limits for the general population.
Consult Safety Code 6, obtainable from health Canada’s website
www.hc-sc.ca/rpb.
Note, any changes to the module not expressly approved by the manufacturer,
could void the user’s authority to operate the equipment.
Note, the use of any antennas other than the antennas located on the module,
is not permitted.
Instructions for the Installer of the Radio Module:
1.
The module must be installed such that the antennas will maintain a
separation distance of 20cm from a user. Installation into a device that does
not ensure 20cm separation distance is not covered by the FCC/IC approval.
2.
This module must not be co-located with any other radio transmitters.
3.
When the module is installed in a host system, the host system must
include a label that states:
“Contains FCC ID: BKMFBWLU3090”
Europe. EU Declaration of Conformity
This equipment complies with the essential requirements of the European
Union directive 1999/5/EC.
Български
С настоящето SEIKO EPSON CORPORATION потвърждава, че това
Безжично устройство е в съответствие със задължителните изисквания и
другите приложими разпоредби на Директива 1999/5/EC.
Čeština
SEIKO EPSON CORPORATION tímto prohlašuje, že tento Wireless Device je
ve shodž se základními požadavky a dalšími príslušnými ustanoveními
smernice 1999/5/ES.
Dansk
Undertegnede SEIKO EPSON CORPORATION erklærer herved, at følgende
udstyr Wireless Device overholder de væsentlige krav og øvrige relevante krav
i direktiv 1999/5/EF.
Deutsch
Hiermit erklärt SEIKO EPSON CORPORATION, dass sich das Gerät Wireless
Device in Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
English
Hereby, SEIKO EPSON CORPORATION declares that this Wireless Device is
in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Eesti
Käesolevaga kinnitab SEIKO EPSON CORPORATION seadme Wireless
Device vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Español
Por medio de la presente SEIKO EPSON CORPORATION declara que el
Wireless Device cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Eλληυικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ SEIKO EPSON CORPORATION ΔΗΛΩΝΕΙ ΟΤΙ Wireless
Device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
Par la présente SEIKO EPSON CORPORATION déclare que l'appareil
Wireless Device est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italiano
Con la presente SEIKO EPSON CORPORATION dichiara che questo
Wireless Device è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Íslensk
Hér með lýsir SEIKO EPSON CORPORATION yfir Því að Wireless Device er í
samræmi viðgrunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Latviešu
Ar šo SEIKO EPSON CORPORATION deklarē, ka Wireless Device atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių k.
Šiuo SEIKO EPSON CORPORATION deklaruoja, kad šis Wireless Device
atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Magyar
Alulírott, SEIKO EPSON CORPORATION nyilatkozom, hogy a Wireless
Device megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
Maltese
Hawnhekk, SEIKO EPSON CORPORATION, jiddikjara li dan Wireless Device
jikkonforma mal-ħtiġijiet essenzja ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Nederlands
Hierbij verklaart SEIKO EPSON CORPORATION dat het toestel Wireless
Device in overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Norsk
SEIKO EPSON CORPORATION erklærer herved at utstyret Wireless Device
er i samsvar med de grunnleggend krav og øvrige relevante krav i direktiv
1999/5/EF.
Polski
Niniejszym SEIKO EPSON CORPORATION oświadcza, że Wireless Device
jest zgodny z zasadniczymi wymogam oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português
SEIKO EPSON CORPORATION declara que este Wireless Device está
conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/CE.
Română
Prin aceasta, SEIKO EPSON CORPORATION declară că acest Dispozitiv
Wireless este în conformitate cu cerinţ esenţiale şi alte dispoziţii relevante ale
Directivei 1999/5/CE.
Slovenčina
SEIKO EPSON CORPORATION týmto vyhlasuje, že Wireless Device spĺňa
základné pošiadavky a všetky prĺsluš ustanovenia Smernice 1999/5/ES.
Slovenščina
SEIKO EPSON CORPORATION izjavlja, da je ta Wireless Device v skladu z
bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Suomi
SEIKO EPSON CORPORATION vakuuttaa täten että Wireless Device
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Svenska
Härmed intygar SEIKO EPSON CORPORATION att denna Wireless Device
står I överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
France
In all Metropolitan départements, wireless frequencies can be used under the
following conditions, either for public or private use:
„ Indoor use: maximum power (EIRP) of 100 mW for the entire
2400–2483.5 MHz frequency band.
„ Outdoor use: maximum power (EIRP) of 100 mW for the 2400–2454 MHz
band and with maximum power (EIRP) of 10 mW for the 2454–2483.5
MHz band.
Taiwan NCC
Article 12: Unless granted permission by Taiwan NCC, the user is not allowed
to change the frequency or transmitting power or enhance or alter the original
design characteristics or operating functions of an approved low-power radio
frequency device.
Article 14: Low-power radio-frequency devices shall not influence aircraft
security or interfere with legal communications; if such influence or
interference occurs, the user shall immediately cease operating the device.
Legal communications is defined as radio communications operations that
conform to the Telecommunications Act. Low-power radio-frequency devices
must accept any interference received from legal communications and
industrial, scientific, and medical (ISM) radio wave devices.
Radio Approvals
It is important to ensure that you use your radio device only in countries where
the device is approved for use.
In countries other than the United States and Japan, verify that the location
setting on the Location tab in Regional and Language Options (from Control
Panel) has been set to the country in which you are using your 2.4GHz
Wireless LAN MINI USB module device. This ensures compliance with local
regulatory restrictions on transmit power and optimizes operational
performance. Any deviation from the permissible power and frequency settings
for the country of use is an infringement of national law and might be punished
as such.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:03:30 11:09:40-07:00
Create Date                     : 2009:03:30 11:09:40-07:00
Format                          : application/pdf
Title                           : Microsoft Word - WLU3090-D69_User Manual_3rd revision.doc
Creator                         : Daveg
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:91b77075-dfea-4570-9dc2-defe6271a2e6
Instance ID                     : uuid:daad1cac-e02b-4ab4-a861-39372ebc5843
Page Count                      : 14
Author                          : Daveg

EXIF Metadata provided by EXIF.tools