Seiko Instruments AB000005 Module User Manual

Seiko Instruments Inc Module 20160616 v1 IFWL 001 rev 160617

a href="https://usermanual.wiki/Seiko-Instruments" itemprop="url"> Seiko Instruments >

User Manual_20160616_v1 - IFWL-001_User Manual_rev 160617.pdf

IFWL-001 User’s Manual  Overview IFWL-001 is a Wireless LAN module for Seiko Instruments Printer. This module provides functions for printing over Wireless LAN.  Install and set default value 1. Install IFWL-001 to Printer with 12pin FFC. 2. Turn the power ON and set default value from Web page or USB connection on FFC. Web page: http://192.168.0.1  To set default value with USB connection, use commands by vendor request on USB. For more detail information, please see specifications document.  How to use 1. #9100 port Connect #9100 port and send printer command. 2. LPR port Connect LPR port and send data with LPR protocol. 3. #26100 port Connect #26100 port and send SVRP command.  Specifications Standard: 802.11b/g/n, 802.11a/n Input voltage: 3.0 to 3.6V Maximum current: 500mA  This  device  complies  with  Part  15  of  the  FCC  Rules.    Operation  is  subject  to  the following  two  conditions:  (1)  This  device may not cause  harmful  interference,  and  (2) this  device  must  accept  any  interference,  including  interference  that  may  cause undesired operation.
Operation  is  subject  to  the  following  two  conditions:  (1)  this  device  may  not  cause interference,  and  (2)  this  device  must  accept  any  interference,  including  interference that may cause undesired operation of the device.  Operations in 5150-5250 MHz band is for indoor use only.  Requirements to end product   This  module  must  be  integrated  only  by  OEM  integrators  under  the  following conditions. (1) OEM integrator  has to  be  aware  not  provide information  to  the  users  regarding how to install or remove this module in the user’s manual of the end product which integrate this module. Installation by end users is strictly prohibited. (2) Antenna   OEM  integrator  shall  use  this  module  without  any  modifications  including antenna.   If module integrator uses a unique antenna, the FCC certification is required for the end product.   OEM  integrator  must  make  sure  that  20cm  minimum  separation  is  maintained between users and the antenna. (3) Co-location.   This  module  must  not  be  co-located  or  operated  in  conjunction  with  any  other antenna or transmitter. The module integrator shall obtain FCC approval for the end product, if the module is used for co-location operation.   (4) Markings   To satisfy FCC/IC exterior labeling requirements, the following text must be placed on the exterior of the end product.    Contains Module FCC ID: C4ZAB000005, IC: 4445A-AB000005 Any similar wording that expresses the same meaning may be used.   (5) Caution to user for modification The following caution is expressed on the user’s instruction manual.   The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.   (6) Compliance statement to FCC The following statement is expressed on the user’s instruction manual.   For Class A device;
Download:
Mirror Download [FCC.gov]
Document ID3061913
Application IDGqeJZiajIilmNWg/beNGPw==
Document DescriptionUser Manual_20160616_v1 - IFWL-001_User Manual_rev 160617.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.21kB (52607 bits)
Date Submitted2016-07-13 00:00:00
Date Available2016-09-19 00:00:00
Creation Date2016-06-08 10:53:28
Producing SoftwareiTextSharp™ 5.5.0 ©2000-2013 iText Group NV (AGPL-version); modified using iTextSharp™ 5.5.0 ©2000-2013 iText Group NV (AGPL-version)
Document Lastmod2016-06-08 10:53:28
Document TitleUser Manual_20160616_v1 - IFWL-001_User Manual_rev 160617.pdf
Document CreatorCubePDF
FCC ID Filing: C4ZAB000005

Navigation menu