Seiko Solar Divers 200M Watch Users Manual SEIKO_V145_E
SOLAR DIVERS 200M Watch to the manual f9097b45-3427-4fa7-8e93-3239e7c805de
2015-02-03
: Seiko Seiko-Solar-Divers-200M-Watch-Users-Manual-467027 seiko-solar-divers-200m-watch-users-manual-467027 seiko pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
TIME/CALENDAR SETTING ANALOGUE QUARTZ SOLAR Cal. V145 & SOLAR DIVER’S WATCH CAL. V145 CROWN Second hand 1 Pull out to first click and turn to set the previous day’s date. Hour hand Minute hand 1 2 ➠ ➠ 3 2 4 ➠ INSTRUCTIONS 用法説明 Printed in Japan NSYV145 2001-9 TO PRESERVE THE QUALITY OF YOUR WATCH 1 2 Pull out to second click when Second hand is at the 12 o’clock position. 2 Turn the rotating bezel to align its “ ” mark with Minute hand. Condition of use Read the number on the rotating bezel that Minute hand points to. 3 Turn until the desired date appears. Diver’s Watch models / Some Regular models 20 minutes have elapsed. Elapsed time * The rotating bezel turns only counterclockwise for safety’s sake. Screw lock crown type Second hand Hour hand HOW TO CHARGE AND START THE WATCH ● ENERGY DEPLETION FOREWARNING FUNCTION ● INSTANT-START FUNCTION ● 200 METER WATER RESISTANCE (For Diver’s Watch) NOTES: observe all instructions for use and maintenance of the watch set forth in this booklet for safety’s sake. Do not attempt to dive using this watch unless you have been properly trained in diving. ● Do not use the watch for saturation diving. 1 2 50 Caution for charging ● When charging the watch, do not place it too close to a photoflash light, spotlight, incandescent light or other light sources as the watch temperature will become extremely high, causing damage to the parts inside the watch. ● When exposing the watch to sunlight to charge it, do not leave it on the dashboard of a car, etc. for a long time, as the watch temperature becomes extremely high. ● While charging the watch, make sure the watch temperature does not exceed 50° C. Most Regular models Minute hand Hour hand a b c 2 CROWN GUIDELINE OF CHARGING TIME Illumination (lux) Date Second hand a) Normal position : Free b) First click : Date setting c) Second click : Time setting Screw lock crown type Minute hand 10 a b 2 c d CROWN 20 30 a) b) c) d) A Screwed-in position Normal position : Free First click : Date setting Second click : Time setting Time required (approx.) B✩ C Distance of 60 cm (2 ft.) 250 hours 15 hours 60 minutes 700 Fluorescent light Office, overhead 175 hours 11 hours 50 minutes 1,000 Distance of 70 cm 30-watt fluorescent light (2 ft. 4 in.) 120 hours 6 hours 30 minutes 3,000 Distance of 20 cm 30-watt fluorescent light (8 in.) 40 hours 2 hours 10 minutes 5,000 Distance of 12 cm 30-watt fluorescent light (5 in.) 22 hours 80 minutes 6 minutes 10,000 Distance of 3 cm 30-watt fluorescent light (1 in.) 10 hours 30 minutes 3 minutes 10,000 Sun Cloudy weather 10 hours 30 minutes 3 minutes 100,000 Sun Fair weather 3 hours 8 minutes 1 minute A: for full charge Date Environment 60-watt incandescent light Rotating bezel Hour hand Light source 500 Diver’s Watch models / Some Regular models 50 40 50 When the instant-start function is activated by exposing the watch to light, Second hand starts moving at 2-second intervals immediately, but the energy stored in the rechargeable battery is not sufficient. If the watch is turned away from the light, it may stop operating. It is not necessary to charge the watch fully. It is important, however, to charge the watch sufficiently, especially in case of initial charge. CAUTION DISPLAY AND CROWN OPERATION 40 8 40 5 6 7 7 Push back in to normal position in accordance with a time signal. 8 While pressing, turn clockwise to screw in completely. B: for 1-second intervals C: to maintain 1-day usage ✩ The values in this column represent the charging times required until Second hand moves constantly at 1-second intervals after the watch starts operating with Second hand moving at 2-second intervals. Even if the watch is not charged for the time specified in the column, Second hand may temporarily move at 1-second intervals. But, it will soon resume moving at 2-second intervals, and therefore, charge the watch for more than the specified period. ● The above table provides only a general guideline. ● When the watch is fully charged, it will keep operating for approximately 6 months. NOTES: 1 Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, it may not change properly. * If it is necessary to set the date during that time period, first change the time to any time outside it, set the date and then reset the correct time. 2 When setting Hour hand, check that AM/PM is correctly set. * The watch is so designed that the date changes once in 24 hours. Turn the hands past the 12 o’clock marker to determine whether the watch is set for the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If the date does not change, the time is set for the P.M. period. 3 When setting Minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. 4 It is necessary to adjust the date at the end of February and 30-day months. ENERGY DEPLETION FOREWARNING FUNCTION ● When the energy stored in the rechargeable battery is reduced to an extremely low level, Second hand starts moving at 2-second intervals instead of the normal 1-second intervals. ● In that case, recharge the watch as soon as possible by exposing it to light. Otherwise, the watch may stop operating in about 3 days. (For recharging the watch, see “HOW TO CHARGE AND START THE WATCH”) TO PREVENT THE ENERGY DEPLETION ■ Wear the watch so that it is not covered by your clothes. NOTE ON POWER SUPPLY ● This watch is provided with a rechargeable battery for exclusive use with the watch. Unlike conventional battery-powered watches, therefore, battery replacement is not necessary. ● The solar cell is a clean energy source, having no adverse effect on the natural environment. CAUTION ● Never insert a conventional silver oxide battery in your watch as it may explode, generate an intense heat or catch fire. The watch is so designed that even if the battery is installed in the watch, the watch will not operate. Taking a bath and shallow diving Scuba diving** No indication Non-water resistant No No No No WATER RESISTANT 3 bar Yes No No No WATER RESISTANT 5 BAR 5 bar Yes Yes No No WATER RESISTANT 10/15/20 BAR 10/15/20 bar Yes Yes Yes No DIVER’S 200 M 20 bar Yes Yes Yes Yes ● Non-water resistant • If the watch becomes wet, have it checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER. ● Water resistant 5/10/15/20 bar 5 bar WR 10/15/20 bar WR If there are any malfunctions, we recommend that you contact an AUTHORIZED SEIKO DEALER before using the watch. While diving • While you are underwater, never unscrew the crown or pull it out. • Take care not to hit the watch against hard objects such as rocks. • Bezel rotation may become slightly harder in the water but this is not a malfunction. TEMPERATURES +50°C -5°C • After making a dive, be sure to rinse the watch in fresh water, and wash out all seawater, soil, sand, etc. • After cleaning the watch in fresh water, be sure to wipe it thoroughly dry to prevent possible rust on the case. • To maintain the excellent water resistant quality of the watch, we recommend that you have the watch overhauled and that you have the gaskets for case back and crown replaced by an AUTHORIZED SEIKO DEALER periodically. • Before using in water, be sure the crown is pushed in completely. • Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. • Do not operate the crown when the watch is wet with soapy water or shampoo. • If the watch is left in warm water, a slight time loss or gain may be caused. This condition, however, will be corrected when the watch returns to normal temperature. * Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** Do not use the watch for saturation diving. After diving Your watch works with stable accuracy within a temperature range of 5° C and 35° C (41° F and 95° F). Temperatures over 50° C (122° F) or below –5° C (+23° F) may cause a slight time loss or gain or shorten the duration within which the watch keeps operating. However, the above conditions will be corrected when the watch returns to normal temperature. MAGNETISM N S 1 2 Frequency of crystal oscillator .. Loss/gain (monthly rate) ........... 3 4 5 6 7 Operational temperature range . Driving system .......................... Power supply ............................ Duration of life Full charge ........................... 2-second interval operation .. Additional function ..................... 8 IC (Integrated Circuit) ................ 32,768 Hz (Hz = Hertz … Cycles per second) ±20 seconds at normal temperature range (5° C ~ 35° C) (41° F ~ 95° F) –5° C ~ +50° C (23° F ~ 122° F) Step motor Titanium-lithium ion rechargeable battery Approx. 6 months Approx. 3 days Instant-start function, energy depletion forewarning function and overcharging prevention function C-MOS-IC, 1 piece * The specifications are subject to change without prior notice for product improvement. CARE OF CASE AND BRACELET Your watch will be adversely affected by strong magnetism. Keep it away from close contact with magnetic objects. SPECIFICATIONS ■ When the watch is not in use, leave it in a bright place as long as possible. * Make sure that the watch temperature does not exceed 50° C. Degree of water resistance* Accidental Swimming, yachting contact and with water taking a such as shower rain and splashes Before diving Check that: • the watch operates normally. • the second hand is moving at 1-second intervals. If it is moving at 2-second intervals, do not use the watch for diving. (For recharging the watch, see “HOW TO CHARGE AND START THE WATCH”) • the time and date are properly indicated. • the rotating bezel turns counterclockwise smoothly (the rotation must not be too loose or too tight) and the “ ” mark aligns with the minute hand. • the crown is locked tightly in place. • there are no visible cracks in the crystal or the watch band. • the strap or bracelet is securely fastened to the watch case. • the buckle or clasp keeps the strap or bracelet firmly secured to the wrist. • the metal bracelet is sized to fit your wrist if your watch has it. * See “GUIDELINE OF CHARGING TIME” . Diver’s Watch model ✩ The solar cell is installed under the dial. SOLAR DIVERS 200M 6 Turn to set Hour and Minute hands to the desired time. 4 ➠ 3 30 ▲ 3 When the watch is charged after it has completely stopped, set the date and time before wearing the watch. ● Diving is an inherently hazardous form of recreation and it is essential that you strictly Second hand 5 Turn until the desired date appears. 20 ✩ If your watch is a diver’s watch, “DIVER’S 200 M” is inscribed on the dial. Please read the instructions pertaining to your watch. SOLAR Date ➠ ▲ 2 Keep the watch exposed to the light until Second hand moves at 1-second intervals. 4 Pull out to second click when Second hand is at the 12 o’clock position. CROWN PRECAUTIONS FOR DIVING for Diver’s Watch model 2 Pull out to first click. 3 Turn to set the previous day’s date. 10 ● ROTATING BEZEL (For Diver’s Watch) DIVERS 200M 3 * When the watch has stopped operating, Second hand will start moving at 2-second intervals. ● SCREW DOWN CROWN (For Diver’s Watch) ✩ The solar cell is installed under the dial. DIVERS 200M 1 Expose the watch to sunlight or strong artificial light. ● OVERCHARGING PREVENTION FUNCTION 1 Unscrew by turning counterclockwise. ➠ 2 SOLAR CROWN 2 20 ● LASTS FOR 6 MONTHS AFTER FULL CHARGE 10 ● When you start the watch or when the energy in the rechargeable battery is reduced to an extremely low level, charge it sufficiently by exposing the watch to light. ● Instant-start function: When the watch is exposed to sunlight or strong artificial light (of more than 1,000 lux), it will start operating immediately with Second hand moving at 2-second intervals. ● NO NEED FOR BATTERY CHANGE CAUTION for 1 TO CHARGE THE WATCH ● POWERED BY LIGHT ENERGY Minute hand 30 FEATURES Indication on case back Start 5 Push back in to normal position in accordance with a time signal. Date Printed on recycled paper WATER RESISTANCE ● The rotating bezel can show up to 60 minutes of elapsed time. 4 Turn to set Hour and Minute hands to the desired time. 5 CROWN Copyright © 2001 by ROTATING BEZEL Most Regular models CHEMICALS Be careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become dis-colored, deteriorated or damaged. PRECAUTION REGARDING CASE BACK PROTECTIVE FILM If your watch has a protective film and/or a sticker on the case back, be sure to peel them off before using your watch. To prevent possible rusting of the case and bracelet, wipe them periodically with a soft dry cloth. SHOCKS & VIBRATION Be careful not to drop your watch or hit it against hard surfaces. PERIODIC CHECK 2-3 Years It is recommended that the watch be checked once every 2 to 3 years by an AUTHORIZED SEIKO DEALER or SERVICE CENTER to ensure that the case, crown, gasket and crystal seal remain intact.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:11:12 11:00:30 Producer : Acrobat Distiller 4.0 for Macintosh Subject : SEIKO_V145_E Creator : Adobe PageMaker 6.53 Title : SEIKO_V145_E Author : Nakano Modify Date : 2001:11:12 11:01:31+09:00 Page Count : 1EXIF Metadata provided by EXIF.tools