Sekonic RT32-03 Remote Flash Control Transceiver User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	1645646
Application ID	trGxW0s8klOLNgDhOpv31Q==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.81kB (135125 bits)
Date Submitted	2012-02-29 00:00:00
Date Available	2012-02-29 00:00:00
Creation Date	0000-00-00 00:00:00
Document Lastmod	0000-00-00 00:00:00
Document Title	Exhibit D Users Manual per 2 1033 b3

SEKONIC
Radio Transmitter RT-32CTL
Operating Manual
Thank you for purchasing this product
Please read the instruction manual thoroughly to assure its safe and proper use.
The RT-SZCI‘L Radio Transmitter is designed to fit into select Sckonic light meters and transmit trigger signals to rocketwnard"
receivers and transceivers as well as electronic flashes with PocketWizard° receivers built-in,
When installed, it enables one person working alone to measure flash output without the need of a sync cord.
Pressing the measuring button simultaneously triggers the flash and measures the light,
The RTA32CT'L Radio Transmitter is also compatible with Pocketwizard0 ControlTL" radios.
Please see the operating manual for each light meter to learn how to set Pocketwizard“i channels for both Standard and
Cantrell-L“ radios.
For L-358
Use the Channel Selector Sheet provided in the RT-BZCTL package to set Control‘l‘l.o transmitting channels,
For Lv758 series
1. If finnware has been upgraded, select Standard and ControlTL'” channels using light meter display.
2. If the firmware has not been upgraded‘ set channels using the Channel Selector Sheet provided in the RT-3ZCFL package.
WWW!
Please use the device properly after reading the Cautions for Safety thoroughly prior to use.
ACAUTION:
* Indicates hazards or unsafe practiccs that can result in the personal injury or damage to your light meter
’ To prevent damage due to static electricity, release static electricity stored in your body by touching a
metal object nearby (door knob, aluminum window frame, etc.) before touching the radio signal trans-
mitter module
NOTE:
* Indicates a caution or limitation that accompanies operation. Please read the note to avoid incorrect ope~
ration.
1. Mounting
(1) Press the POWER button to turn OFF the light met/er.
(2) Open the battery cover.
(3) Remove the connector cover,
(4) Align the connector of the Radio Transmitter with the pins of the light meter’s connector terminal,
(5) Carefully insert the Radio Transmitter connector while holding body of the transmitter parallel to the light meter body,
(6) Confimr that the Radio Transmitter is fully inserted and close the battery cover.
1 Confirmation of operations
Be sure to Lost the operation of the Radio Transmitter and light meter before using it in a photographic situation.
(1) Press the POWER button to mm on the light meter and confin'n that Wireless flash radio triggering mode icon {8 is
displayed on the LCD.
(2) Connect a PocketWizard‘“ receiver or transceiver to a flash and set it to the same channel sot on the light meter.
(3) Press the light meter‘s measuring button to send the trigger and am the light meter for a reading. As red lamp on the
remote receiver or transceiver is lit, the flash will fire and the light meter will record a measurement.
NOTE: * If the Wireless flash radio triggering mode icon E is not displayed, confirm that the Radio Tran-
smittel' is mounted properly in the light meter‘s battery compartment.
* The Wireless flash radio triggering mode icon 5 may not be displayed if you tum the light meter
power off and then immediately turn it back on again. If that happens. turn the power off alld wait about
5 seconds before turning it back on again,
3. Specifications
Size zApprox. 34mm (H) x 28mm (W) x 12mm (D) / l.3"(l-l) x l.1"(W) x 0.5"(D)
Weight : Approx. 10g / 0.3502
Power source : Supplied from the light meter
Radio signal mnsmission distance :Approx. 30nl/100feet (In case that there is no obstacle between transmitter and
receiver/transceiver.)
Applicable standards : FCC‘ Industry Canada, CE
4. How to attach the operating label to the light meter.(For FCC 8L IC versions)
Two types ofslickers are included in the package: for L-358 tlnd L—753CINE.
Please stick "Label B" on t Z 1 area of current "Label A" on the back or light meter,
Label u for 1.353 / Label A Label B for LA758C1NE
SEKOMIC [EEK—071767 A/L“belA
| MODEL I
41/ Label B 1 4/ Label B
l I
L _______ J
NOTE: * Please remember that the light meter may be out of regulation if the label is not attached.
FCC & IC compliance information:
Warning: Changes or modifications to this tlnit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant.
To Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against hnrmful interference in a residential
installation, This equipment generates, uses, and can radiate radio frequency energy and. if not installed and used in accordance
with the instruction. may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in n particular installation, it” this equipment does cause harm in]
interference to radio or television tcception, which cnu be determined by turning the equipment off and on. the user is encouraged
to try to correct me interference by one or more of the following measures:
* Reoriont or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Consult the dealer or an experienced radio/T V technician for help.
This device conrpli s with Part 15 of the FCC rules and also with RSS~210 of Industry Canada Operation is subject to the
following two conditions: (i) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
SEKONIC CORPORATION
7-247 M Oizumi Gakuen Chu, Netitnn-ku, Tokyo Hum Japan
TEL, H 81449784335
FAX. ++ steam-5m
linp : Nivwwaekoniceorn
JO7097520

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2

EXIF Metadata provided by EXIF.tools