Select Hinges SL24 Spec Sheet SL24Spec Web
User Manual: Select Hinges SL24 Spec Sheet Specs
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
SPECIFICATIONS SL24 Concealed Geared Continuous Hinge MATERIAL: Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings. LENGTHS: 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available. 1/16" 11/16" LOAD/FREQUENCY RATINGS: For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Standard Duty – Tested per BHMA standards for medium-frequency doors up to 200 lb. without frame or door reinforcement. 1-29/32" 11/32" bevel edge clearance (min.) Heavy Duty – Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door. 5/16" square edge clearance (min.) DOOR CLOSED Heavy Duty (LL) – Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors. 1-3/4" FINISHES: All SL24 hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty. 7/16" Min. Clearance Required for Cap Rotation CLOSERS: Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced. DOOR OPEN 90˚ ORDER: Specify length, finish and standard duty (SD), heavy duty (HD) or heavy duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 3/4" self-drilling, thread-forming 410SS Phillips undercut flathead screws are provided as a standard pack unless otherwise specified. Wood and thread-forming screws also available. Security screws optional at extra cost. 2-13/32" AVAILABLE ELECTRIC PREPS: EPT, ATW, EMS, CTW4, CTW5, CTW8, CTW10, CTW12, CMG, AP and RP. For CTW12 prep, please consult factory for engineering approval. BHMA CERTIFICATION: SL24SD, SL24HD and SL24LL geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26-2006 Grade 1. DOOR OPEN 180˚ 1" © 2016 SELECT Products Limited Printed in U.S.A. #SP-092316 SL24 HINGE SCREW COUNT Information subject to change without notice. HINGE LENGTH & DUTY RATING DOOR SCREWS FRAME SCREWS 79" HD 19 19 83" SD/HD 19 19 85" SD/HD 19 19 95" SD/HD 21 21 120" SD/HD 23 23 83" LL 26 26 85" LL 26 26 95" LL 30 30 120" LL 34 34 Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com SPECIFICATIONS SL24 Concealed Geared Continuous Hinge SELECT Hinge Performance SELECT Advantages ■■ A SELECT geared continuous hinge has been tested in accordance with ANSI 250.41994 test procedure and acceptance criteria for physical endurance for steel doors and hardware and has surpassed 25,000,000 cycles during testing by an independent laboratory. On a door cycling 400,000 times per year, a SELECT hinge will be performing for over 62 years. ■■ SELECT geared continuous hinges are built to handle abuse from high-traffic applications. They are applied to the surface on the edge of the frame and door. No machining or reinforcement is required. ■■ The revolutionary SELECT geared continuous hinge puts an end to costly and irritating hinge failure problems, the most common cause of entrance failure. ■■ On conventional hinges, opening and “kickback” energy concentrate on a few inches of fastened reinforcing plate — with the top hinge handling 100% of the force. Pinless SELECT hinges bond the door and frame into an integrated, sag-free unit. “Kick-back” energy dissipates along the entire length of the door and frame. (Compare this to a conventional hinge’s 4-1/2" to 5" at the top of the door and frame). ■■ SELECT geared continuous hinges eliminate the gap between the door and frame, providing a weatherproof, rust-proof, tamperproof barrier. When the door is closed, there are no accessible screws, bolts or pins. ■■ SELECT SL24 geared continuous hinges are listed and tested by Underwriters Laboratories to meet the Positive and Negative pressure requirements of UL10B and UL10C, and are in accordance with UBC 7.2 (1997). SELECT SL24 geared continuous hinges are for use on swinging single fire doors (max. door opening of 4'x10') or pairs of fire doors (max. door opening of 8'x10'), including double egress, installed in masonry or drywall. SELECT SL24 geared continuous hinges are rated for up to 1-1/2 hours for wood composite and wood core type fire doors. A special patented process can be added to increase the fire rating to 3 hours (NO FIRE PINS OR STUDS REQUIRED) for hollow metal or steel covered composite type doors. PAIR-MATCHED™ HINGE LEAVES Manufactured together, machined together and anodized together, making SELECT hinges fit your doors better and last longer. An exclusive SELECT benefit. LIFETIME LUBRICATION Eliminates the need for periodic maintenance. Quiet performance. Fights gear cap wear. An exclusive SELECT benefit. ANODIZED AFTER MACHINING Delivers superior wear, durability and life. Inhibits corrosion. Few hinge makers follow SELECT’s lead in using this superior manufacturing process. MEETS LEED REQUIREMENTS Made from recycled aluminum. Reduces environmental impact and qualifies for LEED points. An exclusive SELECT benefit. PATENTED 3-HR. FIRE RATING Most SELECT hinges are fire rated for 90 minutes. 3-Hr. fire rating, optional at extra cost, approved for positive/negative pressure. No fire pins or studs required. Patented design innovation. An exclusive SELECT benefit. CONSISTENT TEMPLATING Hole pattern is identical on both Standard and Heavy Duty models, so SELECT hinges line up precisely for easier and faster installation. An exclusive SELECT benefit. COATED FASTENERS Provide additional corrosion protection with either self-drilling, thread-forming (SDTF) or thread-forming (TF) screws. An exclusive SELECT benefit. CUSTOM COLORS Match any paint color on the gear cap or the entire hinge and fasteners, including our always-in-stock Bone White gear caps. Anodized colors also available. Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com Information subject to change without notice. © 2016 SELECT Products Limited Printed in U.S.A. #SP-092316
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19 Instance ID : uuid:c3413574-2f5f-5946-b9df-e70a5644dd62 Original Document ID : adobe:docid:indd:f0e78300-ea8e-11db-87df-899a2db5f3b7 Document ID : xmp.id:9cd9a367-dd26-498b-afa8-90836d25a87d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:74caedc0-0a3e-4fa0-9779-6fdbb1c87fea Derived From Document ID : xmp.did:74caedc0-0a3e-4fa0-9779-6fdbb1c87fea Derived From Original Document ID: adobe:docid:indd:f0e78300-ea8e-11db-87df-899a2db5f3b7 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:09:23 12:53:37-04:00 Create Date : 2016:09:23 12:53:37-04:00 Modify Date : 2016:09:23 12:53:38-04:00 Metadata Date : 2016:09:23 12:53:38-04:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools