Selex ES 774-0788 PUMA T3 Plus/806-870 User Manual Puma T3 Plus QRG A3 pm6

Selex ES SPA PUMA T3 Plus/806-870 Puma T3 Plus QRG A3 pm6

UserManual.wiki >

774-0788 User Manual >

Contents

1. safety instructions
2. user manual

user manual

P/N MAN-0696/01.01 P/N MAN-0696/01.01 P/N MAN-0696/01.01P/N MAN-0696/01.01Switch on/switch off thehandportableManage thePIN(PersonalIdentificationNumber)Hold yourPuma T3PLUSChange con-versationmode Ear-phone/Loud-speakerAdjust theVolumeLock/unlockkeypadChangemodalityTMO/DMO/FM (*)ChangeWorkingProfile Sub-set (WPS)Call a groupKeep pressed the key for a few seconds.The radio can also be turned on by keepingpressed the emergency key for a few sec-onds.PIN insertion at power on, can be:• Enable/disabled from menu• Always enabled• Always disabledIf PIN insertion is enabled, at power on theuser must insert the current PIN.In case of insertion of 3 consecutive wrongpin, the current PUK must be inserted to un-lock the radio.In case of 3 consecutive wrong PUK insertionthe radio must be reprogrammed to be un-locked.When you are speaking in Earphonemode, hold your radio like a normaltelephone.In Loudspeaker mode (or in FM modewithout the use of earphone accesso-ries) hold Puma T3 PLUS in verticalposition with its microphone, which islocated towards the bottom of the ra-dio, in front of your mouth.During conversation, press the key .Otherwise select Settings →→→→→ Preferences →→→→→Talk from main menu.To adjust the speech volume, use the volumeknob; turn it clockwise to increase the volumeand counterclockwise to decrease it. To ad-just the volume of the various sounds accessfrom main menu to Settings →→→→→ Preferences→→→→→ Sounds.Press the keys and then to lock thekeypad; to unlock it press any key and followthe instructions shown on the display.Keep pressed key 0 for a few seconds. Oth-erwise select Change mode from main menuand select the modality.Each WPS is composed of a set of differentgroups related to the group selector knob po-sitions. Changing WPS you change the groupsthat can be selected by means of the knob.To change WPS, keep pressed key 2ABC for afew seconds. Otherwise select Settings →→→→→Group MNG →→→→→ WPS Select.Select the group by means of the relevantknob, then press PTT to talk; otherwise typein the group address and press PTT.Call the dis-patcher ofthe selectedgroup (if thenetworkallows thisfunction)Call theOPENGROUPMake anindividual fullduplexspeech callMake anindividualhalf duplexspeech callMake a callin FM mode(*)Send anemergencyalarmSend astatusmessageSend a textmessageSend DTMFtonesRead areceivedmessage(Inbox)Access lastcalls listGo back ina group callEnable/disableencryptionActivateBluetooth(*)Connect anduseBluetoothaccessories(*)**RemoveBluetoothaccessories(*)DeactivateBluetooth (*)VisualizeGPS dataCheck theradiocoverage ofother users******************Select the group by means of the relevantknob and press PTT(1) to call the first avail-able dispatcher of the selected group (notthe group).Keep pressed key 9WXYZ for a few seconds,then press PTT to talk.Type in the address or select a subscriberselecting Phone Lists →→→→→ Phone Book thenpress key .Type in the address or select a subscriberselecting Phone Lists →→→→→ Phone Book thenpress PTT(1).To make a call in FM mode (whether to a useror to a group) dial the user or the group ad-dress to be called, or select the address fromthe Phone Lists and press the key . PressPTT to talk.Keep pressed the emergency key at least for2 seconds. In TETRA mode the radio can beprogrammed to:• Send a call request• Sen an SDS• Send a call request and an SDSat the emergency key pressing.In FM mode, if the channel selected is UHF(simplex or network) the radio sends an alarmuntil another radio gives the received alarmsignal through the key .Access the send status menu, pressing thekey or selecting from main menu:Messages →→→→→Send Status.Select the status to be sent, then select anuser or a group and send it by meansof the key or selecting the Send option.Access the text messages selecting from mainmenu Messages →→→→→ Text Messages; other-wise keep pressed key 4GHI for a few seconds.Create a new message or select a predefinedmessage then select Option →→→→→ Send. Selectan user or a group and send themessage by means of key or selectingthe option Send. During the editing of a mes-sage it is possible to change from Uppercaseto Lowercase pressing the key .During a half duplex call, access the DTMFmenu by pressing the key from the mainscreen keep pressing the PTT and send DTMFtones by means of the relative keys (eachalphanumeric key is a different tone).Access the received messages list from mainmenu selecting Messages →→→→→ Inbox. Use the key to scroll the list of messages. The re-ceived messages can be status or text messages. Select the message to be readand then Option to choose among Delete-Replay-Replay+History.From idle status press key to display thelist of the last 20 calls. Scroll them by meansof key . In TETRA mode it is possible torecall the subscriber by means of PTT (1) (Half-Duplex) or key (Full-Duplex, TMO only). InFM mode it is possible to recall the subscriberor the group, by means of the key .It is possible to go back in a group call whichis still active and from which you have discon-nected: in TMO by pressing the PTT and inDMO by keeping pressed the keyTUV .To enable/disable encryption End To Endencryption select Encryption →→→→→ E2EE sta-tus. Once encryption is enabled the symbol appears on the radio display and it is pos-sible to choose the key used for the encryptionselecting the item E2EE key.Activate Bluetooth functionality selecting Set-tings →→→→→ Bluetooth →→→→→ Activation. OnceBluetooth is active the symbol appears onthe radio display. Note: If the radio is turnedoff with the Bluetooth active, at the succes-sive switch on the Bluetooth is deactivated.With Bluetooth functionality active select themenu item Find New from Settings →→→→→Bluetooth →→→→→ Devices (Bluetooth device mustbe in inquiring status). Once the device hasbeen found check if it is "Trusted" or"Untrusted" through the menu item DevicesList from menu Settings →→→→→ Bluetooth →→→→→ De-vices, showing the device information. If thedevice is "Untrusted" select Option from thedisplay showing the device information, andthen select Services Search.Once the device is "Trusted" select Optionfrom the display showing the device informa-tion, and then select Services List.Choose the service scrolling the list throughthe key , select Option and then Open, toopen the service. If the accessory connectedis a Bluetooth headset, once the service hasbeen opened the symbol will be shown onthe radio display. To pass the audio signal tothe headset press the button located on theheadset itself. Pressing the headset buttonagain the audio signal returns to the radio.************************How to...TMODMOFM***How to... How to... How to...****To remove a Bluetooth accessory it is firstnecessary to disconnect it closing and remov-ing the relative service:• select Settings →→→→→ Bluetooth →→→→→ Devices→→→→→ Devices List;• scroll the device list till the device to be re-moved and select Option;• select the item Services List and scroll theService List till the service to be close;• select Option and then Close. Then, fromthe same menu select Remove to removethe service.Now it is possible to remove the accessory:• select Settings →→→→→ Bluetooth →→→→→ Devices→→→→→ Devices List;• scroll the device list till the device to be re-moved and select Option;• select the item Remove Device;• press the key associated with "YES" toconfirm the operation.To deactivate Bluetooth it is first necessary toremove all the Bluetooth accessories, thenselect Settings →→→→→ Bluetooth →→→→→ Deactiva-tion.Select GPS item from main menu to visualize:date, time, latitude, longitude, satellite number.Access the monitor menu keeping pressedthe key for a few seconds from idle sta-tus, otherwise select Monitor item from mainmenu. Selecting Option it is possible to chooseamong:•Add (to add an user to be monitored)•Delete (to remove an user to be monitored)•View (to visualize the details of the last threeradio coverage checks of the specific user).The first time that you access this menu it isrequired to enter the first address to be moni-tored.******TMODMOFM***TMODMOFMTMODMOFM** NOTE:Through the sub-menus of item Settings it is possible to configure several options of thehand-held radio terminal. For example, in TETRA mode, it is possible to inhibit the trans-mission (Tx Inhibit) or to select the default gateway and the digit ("0" "9") that must bedialled to access that gateway (Gateway<0>, Gateway<9>).It is also possible to configure the accessories connected and to enable/disable the deadman functionality. Through the Preferences sub-menu the user can personalize the termi-nal, setting: language, sounds volume, display options. Selecting Help from main menu it ispossible to visualize: the direct access keys function (direct access keys are availableeven during calls), the description of the strings to be dialled to define the call priority, thegateways and the address composition method (for TETRA). Also the meaning of thesymbols that can be visualized on the radio display is shown. NOTE:From the idle status keep the key pressed for about two seconds to quickly access therelevant functions.****(*) Function not available for U.S. market

Navigation menu