Senao Co IS-30V16 802.11g Mobile Wireless Mini PCI Adapter User Manual Manual
Senao International Co Ltd 802.11g Mobile Wireless Mini PCI Adapter Manual
Senao Co >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 368772 |
| Application ID | TQ7T+L6UTTf7gOh/w6CU8w== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 51.23kB (640411 bits) |
| Date Submitted | 2003-10-27 00:00:00 |
| Date Available | 2003-10-27 00:00:00 |
| Creation Date | 2003-10-23 11:47:47 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-10-23 19:57:11 |
| Document Title | Microsoft Word - NL-3054MP Plus_UsersManual_V11.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | windy |
SENAO High-Speed Wireless MiniPCI Adapter User’s Manual Version: 1.1 High-Speed Wireless MiniPCI Adapter Version: 1.1 Table of Contents Chapter 1 – Introduction 1.1 Features & Benefits………………………………………………………………..4 1.2 Package Contents………………………………………………………………….4 1.3 MiniPCI card Description………………………………………………...……………..4 1.4 System Requirements…………………………………………….……………….5 1.5 Applications…………………………………………………………………………5 1.6 Network Configuration……………………………………………………….…….6 Chapter 2 – Drivers & Client Utility 2.1 Before You Begin…………………………………………………………………..8 2.2 Installing the MiniPCI card Drivers…………………………………………………….8 2.3 Verify the Installation………………………………………………………….….12 2.4 Disable Windows SSID/WEP Configuration……………………………..…….12 2.5 Using the Client Utility………………………………………………...………….14 2.5.1 Wireless Radio On/Off…………….……………………………..………..15 2.5.2 Remove Status Icon…………………………………………….…………15 2.5.3 Wireless Network Status……….……………………………….…………16 2.5.3.1 Status………………………………………………………….16 2.5.3.2 Configuration……………………………………………….…17 2.5.3.3 Encryption..……………………………………..…………….18 2.5.3.4 Site Survey..………………………………………….……….18 2.5.3.5 IBSS.……...…………………………………………...………19 2.5.3.6 Rates……...……………………………………………..…….20 2.5.3.7 Domain……………………………………………………..….21 2.5.3.8 About…………………………………………………………...21 2.6 Uninstall the Client Utility……………………………………………….………..22 Appendix A – Troubleshooting………………………………….…………………25 Appendix B – Product Specifications……………….…………………………….26 Appendix C – Regulatory Compliance Information…………….………………27 Page 2 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 Revision History Version Date Notes 1.0 1.1 September 8, 2003 October 2, 2003 Initial Version Updated Screens Page 3 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 1 Introduction This chapter describes the features & benefits, package contents, MiniPCI card description, system requirements, applications, and network configuration. 1.1 Features & Benefits Features High-speed data rate up to 54 Mbps WEP Data Encryption and TKIP IEEE 802.1x client support (optional) Multi-country roaming (802.11d) support Advanced power management TPC (Transmission Power Control) and DFS (Dynamic Frequency Selection) support 1.2 Enhances authentication and security. Automatically adjusts regulatory domain to operate in different countries. Low power consumption in power saving mode. TPC offers flexibility to adjust RF output power. Package Contents 1.3 Benefits Capable of handling heavy data payloads such as MPEG video streaming. Powerful data security. One MiniPCI Card One Installation CD One Quick Installation Guide System Requirements The following are the minimum system requirements in order to use the MiniPCI card. • PC/AT compatible computer with a PCMCIA Type II slot. • Windows 98/ME/ /2000/XP operating system. • 1.3 MB of free disk space for installing the MiniPCI card driver and utility program. 1.4 Applications The wireless LAN products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power and flexibility of wireless LANs: a) Difficult-to-wire environments There are many situations where wires cannot be laid easily. Historic buildings, older buildings, open areas and across busy streets make the installation of Page 4 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 LANs either impossible or very expensive. b) Temporary workgroups Consider situations in parks, athletic arenas, exhibition centers, disasterrecovery, temporary offices and construction sites where one wants a temporary WLAN established and removed. c) The ability to access real-time information Doctors/nurses, point-of-sale employees, and warehouse workers can access real-time information while dealing with patients, serving customers and processing information. d) Frequently changed environments Show rooms, meeting rooms, retail stores, and manufacturing sites where frequently rearrange the workplace. e) Small Office and Home Office (SOHO) networks SOHO users need a cost-effective, easy and quick installation of a small network. f) Wireless extensions to Ethernet networks Network managers in dynamic environments can minimize the overhead caused by moves, extensions to networks, and other changes with wireless LANs. g) Wired LAN backup Network managers implement wireless LANs to provide backup for missioncritical applications running on wired networks. h) Training/Educational facilities Training sites at corporations and students at universities use wireless connectivity to ease access to information, information exchanges, and learning. Page 5 of 28 High-Speed Wireless MiniPCI Adapter 1.5 Version: 1.1 Network Configuration To better understand how the wireless LAN products work together to create a wireless network, it might be helpful to depict a few of the possible wireless LAN MiniPCI card network configurations. The wireless LAN products can be configured as: a) Ad-hoc (or peer-to-peer) for departmental or SOHO LANs. b) Infrastructure for enterprise LANs. c) Wireless routing and IP sharing. a) Ad-Hoc (peer-to-peer) Mode This is the simplest network configuration with several computers equipped with the MiniPCI cards that form a wireless network whenever they are within range of one another. In ad-hoc mode, each client is peer-to-peer, would only have access to the resources of the other client and does not require an access point. This is the easiest and least expensive way for the SOHO to set up a wireless network. The image below depicts a network in ad-hoc mode. b) Infrastructure Mode The infrastructure mode requires the use of an access point (AP). In this mode, all wireless communication between two computers has to be via the AP. It doesn’t matter if the AP is stand-alone or wired to an Ethernet network. If used in stand-alone, the AP can extend the range of independent wireless LANs by acting as a repeater, which effectively doubles the distance between wireless stations. The image below depicts a network in infrastructure mode. Page 6 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 Extended-range independent WLAN using an AP as a repeater; if wired to an Ethernet network as shown below, the AP serves as a bridge and provides the link between the server and the wireless clients. The wireless clients can move freely throughout the coverage area of the AP while remaining connected to the server. Since the AP is connected to the wired network, each client would have access to the server’s resources as well other clients. Access points have a finite range, on the order of 50 meters indoor and 100 meters outdoors. In a very large facility such as an enterprise, a warehouse, or on a college campus, it will probably be necessary to install more than one access point to cover an entire building or campus, as shown in the image below. In this scenario, access points hand the client off from one to another in a way that is invisible to the client, ensuring their connectivity. Wireless clients can roam seamlessly between different coverage areas and remain connected to the network. Page 7 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 c) Wireless routing and IP sharing In infrastructure mode, in addition to acting as a bridge between an Ethernet and wireless network, the AP can be configured as a wireless router and IP sharing device for Internet access as shown below. You don’t need to buy an expensive router. Nor do you need to buy several modems and set up phone lines. Just share one AP, one modem, a single dial-up account, and one phone line; dozens of network users can surf the Internet simultaneously. 2 Drivers & Client Utility This chapter describes how to install the drivers and client utility in Windows 98/ME/2000/XP. 2.1 Before You Begin Before installing the new drivers into your PC, you need to remove all of the Wireless LAN MiniPCI card drivers that you have installed. During the installation, Windows 98/ME/2000/XP may need to copy systems files from its installation CD. Therefore, you may need a copy of the Windows installation CD at hand before installing the drivers. On many systems, instead of a CD, the necessary installation files are archived on the hard disk in C:\WINDOWS \OPTIONS\CABS directory. 2.2 Installing the MiniPCI card Drivers Follow the steps below in order to install the MiniPCI card drivers: 1. Insert the CD-ROM that was provided to you in this package. The setup should run automatically. If the setup does not run automatically, then you must manually select the setup.exe file from the CD-ROM drive. 2. Once the setup begins you will see the Install Shield Wizard, as the image depicts below. Page 8 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 3. Click on the Next button to continue. The Install Wizard will then copy a few files that are necessary to install the MiniPCI card. You will then see the Welcome screen, as the image depicts below. 4. Click on the Next button to continue. The setup will then bring you to the Software License Agreement screen, as the image depicts below. Page 9 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 5. After reading the license agreement click on the Yes button to continue. The setup will then copy the drivers into your PC. You will then see the Setup Complete screen, as the image depicts below. 6. Click on the Finish button. The first part of the installation is complete. 7. Gently insert the MiniPCI card into the PCMCIA Type II slot of your PC. Windows will automatically detect the MiniPCI card and display the Found New Hardware Wizard, as the image depicts below. Page 10 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 8. Select the Install the software automatically (Recommended) radio button, and then click on the Next button to continue. The setup will then begin to copy the necessary files. After the copying is completed you will see the final screen of the installation procedure, as the image depicts below. 9. The installation of the MiniPCI card is now complete. Click on the Finish button. Page 11 of 28 High-Speed Wireless MiniPCI Adapter 2.3 Version: 1.1 Verify the installation Follow the steps below in order to verify that the MiniPCI card has been installed and is functioning properly: 1. 2. 3. 4. Click on Start > Settings > Control Panel. Double click on the System icon. Click on the Hardware tab, and then click on the Device Manger button. Select Network adapters to view a list of network adapters on your PC. You will then see a window similar to the image below. 5. Make sure that you do not see a yellow (?) or a red (X) next to the MiniPCI card (IEEE 802.1g WLAN 11g network adaptor 802.11g Adapter). If you do see a (?) or (X) you would need to uninstall the drivers, and reinstall them again. In order to uninstall the drivers refer to section 2.6 Uninstall Client Utility. 2.4 Disable Windows SSID/WEP Configuration In order to configure SSID and WEP settings from the Client Utility, you must first disable the Windows based SSID and WEP configuration from the Network Configuration in the Control Panel. Follow the steps below in order to disable the SSID and WEP on Windows. 1. Click on Start > Settings > Control Panel. 2. Double click on the Network Connections icon. 3. Right-click on the wireless network connection for the MiniPCI card, and then select Properties. The icon may look similar to the image below. Page 12 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 After you click on Properties, the Wireless Network Connection Properties window will appear, as the image depicts below: 4. Click on the Wireless Networks tab, you will then see the following screen. Page 13 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 5. Make sure that there isn’t any check placed in the Use Windows to configure my wireless network settings check box. 6. Click on the OK button. 2.5 Using the Client Utility After a successful installation you will see the MiniPCI card Client Utility radio icon in the system tray. Green indicates good or excellent link status. Yellow indicates fair link status. PC Card Client Utility radio Red indicates poor or no link status. Page 14 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 The client utility will automatically be executed and show a small green radio icon at the bottom right corner of your screen in the system tray whenever the MiniPCI card is inserted into the MiniPCI card slot of your computer. Right-click the radio icon to view the list of options available. Each item is described below. 2.5.1 Wireless Radio On/Off The first two items in the icon menu are used to turn on/off the wireless radio (image right). When the wireless radio is turned off, a red cross is placed over the radio icon in the system tray as shown below. When the wireless radio is turned on, the icon will vary in colors depending on the link quality. Link Quality Wireless Radio Off Green indicates good or excellent link status. Yellow indicates fair link status. Red indicates poor or no link status. 2.5.2 Remove Status Icon This item allows you to set the system tray radio icon to appear or disappear. Once you choose this item, the system will display the dialog box to confirm if you want to remove the system tray icon as shown below. You can also set the system tray radio icon to disappear permanently by placing a check in the box Remove Status Icon Permanently as shown above. When the computer is restarted, the system tray radio icon will reappear unless the Remove Status Icon Permanently box was checked. Page 15 of 28 High-Speed Wireless MiniPCI Adapter 2.5.3 Version: 1.1 Wireless Network Status This item allows you to view the status, configure IBSS, Rates, Domain, and view information about the client utility. 2.5.3.1 Status The Status tab displays the current status of the wireless radio. The following information is included in this tab, as the image depicts below. State: this displays the MAC address of the AP that the radio is associated with. Current Tx Rate: this displays the current transfer rate. Disable Radio: click on this button to turn the radio off. Rescan: click on this button if you would like the radio to scan for a different channel. Current Channel: this displays the current channel that the radio is using. Throughput (bytes/sec): this displays the transmitting (Tx) and receiving (Rx) bytes per second. Link Quality: this displays the quality of the link from the radio to the AP. Signal Strength: this displays the strength of the signal from the radio to the AP. Click on the Apply or OK button if you have made any changes. Page 16 of 28 High-Speed Wireless MiniPCI Adapter 2.5.3.2 Version: 1.1 Configuration The Configuration tab allows you to configure the SSID and type of network. The following information is included in this tab, as the image depicts below. Profile Name: enter a name for this profile; this can be any name that you may associate with your network. Network Name: enter the SSID of the network. The SSID is a unique name shared among all points in your wireless network. The SSID must be identical for all points in the network, and is case-sensitive. Network Type: select Peer-to-Peer or Access Point from the drop-down list. Click on the Apply or OK button if you have made any changes. Page 17 of 28 High-Speed Wireless MiniPCI Adapter 2.5.3.3 Version: 1.1 Encryption The Encryption tab allows you to configure WEP security. The following information is included in this tab, as the image depicts below. Encryption (WEP security): WEP is an acronym for Wired Equivalent Privacy, which is a security protocol for Wireless Local Area Networks (WLANs) defined in the 802.11 standard. WEP is designed to provide the same level of security as a wired LAN. Select disabled, 64-bit, or 128-bit from the drop-down list. Alphanumeric characters: select this radio button if you would like to use characters/numbers for the WEP key. Hexadecimal digits (0-9, A-F): select this radio button if you would like to use hexadecimal digits for the WEP key. Key 1 – Key 4: enter the WEP key here. Create Keys with Pass phrase: enter a string of characters to be used as a WEP key. Use WEP key: select a key number from the drop down list. Click on the Apply or OK button if you have made any changes. 2.5.3.4 Site Survey The Site Survey tab displays a list of Access Points in the area, and allows you to connect to a specific Access Point. The following information is included in this tab, as the image depicts below. Page 18 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 SSID: displays the SSID of the Access Point. LQ: displays the link quality of the Access Point. C: displays the channel number of the Access Point. BSSID: displays the MAC address of the Access Point. W: indicates whether WEP is enabled. Mode: indicates whether the SSID is a Station (STA) or Access Point (AP). WPA: indicates whether WPA (Wi-Fi Protected Access) is enabled. Connect: to connect with a specific Access Point, select the Access Point from the drop-down list, and then click on the Connect button. Scan: to view a list of Access Points in the area click on the Scan button. Click on the Apply or OK button if you have made any changes. 2.5.3.5 IBSS The IBSS tab displays IBSS Channel Selection. You may select a channel from the list, or click on the Default button, for a default channel. The image below depicts the IBSS tab. Page 19 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 Click on the Apply or OK button if you have made any changes. 2.5.3.6 Rates The Rates tab displays the data rate. You may select a data rate from the list, or click on the Default button, for a default data rate (Fully Automatic). The image below depicts the Rates tab. Click on the Apply or OK button if you have made any changes. Page 20 of 28 High-Speed Wireless MiniPCI Adapter 2.5.3.7 Version: 1.1 Domain The Domain tab displays the 802.11d support and current countries/domains, as the image depicts below. 802.11d Support: by default 802.11d support is set to flexible. You may change this by selecting None or Strict. Countries/Domains: you may select your country from the drop-down list. You will then see country specific information in the text box. Click on the Apply or OK button if you have made any changes. 2.5.3.8 About The About tab displays information about the MiniPCI card. This includes the network driver version and date, configuration utility version and date, and the NIC (Network Interface Card) firmware version and date. Page 21 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 2.6 Uninstall the Client Utility If the MiniPCI card installation is unsuccessful for any reason, the best way to solve the problem may be to completely uninstall the MiniPCI card and its software and repeat the installation procedure again. Follow the steps below in order to uninstall the Client Utility: 1. Double click on the Safely Remove Hardware icon in the system tray. Safely Remove Hardware icon After clicking on the icon the following window will appear. 2. Select IEEE 802.11g WLAN11g network adaptor 802.11g Adapter and then click on the Stop button. You will then see a window asking you to confirm the stop. Page 22 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 3. Click on the OK button. 4. At this point, gently remove the MiniPCI card from the PCMCIA Type II slot. 5. Click on Start > Settings > Control Panel, and then click on the Add or Remove Programs icon. A window will then appear listing all the programs on your PC. From the list click on the MiniPCI card item, as the image depicts below. 6. Click on the Change/Remove button. You will then be asked to confirm the file deletion, as the image depicts below. 7. Click on the Yes button. The uninstall shield will then begin to uninstall the files from you computer, as the image depicts below. Page 23 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 8. Click on the OK button, the uninstallation is successful. Page 24 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 Appendix A – Troubleshooting The following table describes the solutions for the problems that may occur when installing the MiniPCI card. Problem Windows does not detect the MiniPCI card when installed Solution Verity that the MiniPCI card is properly inserted into the MiniPCI card slot. Check whether the computer has a Plug and Play BIOS. Driver fails to load Device conflict on Windows system No resource conflicts were detected, but the wireless station does not attach to the network Non functioning card LED Windows 98/ME/2000/XP might not detect the MiniPCI card if a previous installation of the MiniPCI card was cancelled before it was completed. Remove the driver and reinstall it again. A resource conflict could exit. Use the Device Manger to resolve the resource conflict. A device conflict may be related to MiniPCI card. Use the computer properties to identify the Port Address and IRQ values. If there is a device conflict, select alternative settings for I/O Base Address or IRQ values. If you know which device is conflicting with the MiniPCI card, you have the option of changing the device’s I/O address or IRQ instead of the MiniPCI card. Verify that the SSID of the MiniPCI card matches that of the Access Point. Use the Network Configuration properties in the control panel to modify the SSID. The MiniPCI card is not powered on: The cause may be: • No driver loaded or installed. • Card – Driver mismatch, which prevented the driver from loading. • Device conflict, which prevented the driver from loading. Actions: • Verify that the driver has been installed. • Determine if there is a conflict with another device. Page 25 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 Appendix B – Specifications Wireless MiniPCI Adapter General Data Rates 1,2,5.5,6,9,11,12,18,24,36,48,54 Mbps Network Standards IEEE 802.11, IEEE 802.11b, 802.11g draft Compliance FCC Part 15/UL, ETSI 300/328/CE Drivers Windows 98/ME/2000/XP Operational Voltage 3.3 V ± 0.15V Current Consumption Continue Tx: < 1000mA Continue Rx: < 500mA Security IEEE802.1x Client Support WPA -- Wi-Fi Protected Access (64,128-bit WEP with TKIP, PreShare Key) RF Information Frequency Band Channels Media Access Protocol Modulation Technology Receive Sensitivity (Typical) Available transmit power (Depend on Different Countries’ Regulation) 2412 – 2483.5 MHz 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France Carrier sense multiple access with collision avoidance (CSMA/CA) Orthogonal Frequency Division Multiplexing (OFDM) DBPSK @ 1Mbps DQPSK @2Mbps CCK @ 5.5 & 11Mbps BPSK @ 6 and 9 Mbps QPSK @ 12 and 18 Mbps 16-QAM @ 24 and 36 Mbps 64-QAM @ 48 and 54 Mbps -94dBm @ 1Mbps -92dBm @ 6Mbps -83dBm @ 24Mbps -92dBm @ 2Mbps -90dBm @ 9Mbps -79dBm @ 36Mbps -89dBm @ 5.5Mbps -88dBm @ 12Mbps -74dBm @ 48Mbps -86dBm @ 11Mbps -86dBm @ 18Mbps -72dBm @ 54Mbps 21 ± 2dBm @1, 2, 5.5 and 11Mbps 20 ± 2dBm @6, 9, 12, 18Mbps 17 ± 2dBm @24, 36Mbps 16 ± 2dBm @48, 54Mbps Physical Interface Mini PCI TypeIII A Antenna Two Antenna Connectors(U.FL) Dimensions 50.9(L) mm x 59.6(W) mm x 4.8.(H) mm 2 (L) in x 2.3(W) in x 0.2.(H) in Environmental Temperature Range Humidity (non-condensing) 0°C to 55°C - Operating -40°Cto 70°C - Storage 5%~95% Typical Page 26 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 Appendix C – Regulatory Compliance Information Mobile of module Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 27 of 28 High-Speed Wireless MiniPCI Adapter Version: 1.1 This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example :Access Point , Router etc.). The final end product must be labeled in a visible area with the following: “Contains TX FCC ID: NI3-IS-30V16”. Manual Information That Must be Included The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrate this module. The users manual for OEM integrators must include the following information in a prominent location “ IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. Page 28 of 28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Create Date : 2003:10:23 11:47:47Z Modify Date : 2003:10:23 19:57:11+08:00 Page Count : 28 Creation Date : 2003:10:23 11:47:47Z Mod Date : 2003:10:23 19:57:11+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : windy Metadata Date : 2003:10:23 19:57:11+08:00 Creator : windy Title : Microsoft Word - NL-3054MP Plus_UsersManual_V11.docEXIF Metadata provided by EXIF.tools