Senao Co IS20V312-PLUS Long Range Wireless PCMCIA Card User Manual 2511CD final ext2

Senao International Co Ltd Long Range Wireless PCMCIA Card 2511CD final ext2

Manual

Wireless LAN Card User Guide Before operating the unit, please read this manual and retain it for future The user guide is fit for both Wireless LAN Card and Long Range Wireless LAN Card Long Range Wireless LAN Card
2 Contents 1. Introduction 1 1.1 Package Contents 1 1.2 PC Card Description 1 1.3 System Requirements 2 1.4 Features and Benefits 2 1.5 Applications 2 1.6 Network Configurations 3 2. Installing Driver and Utility 8 2.1 Installation for Windows 98/ME/2000/XP 8 2.2 Checking after Installation 15 2.3 Wireless LAN Client Utility 17 2.4 Uninstalling Driver and Utility 30 3. Connecting to a Network 31 3.1 Checking and Adding Client for Microsoft Networks 31 3.2 Checking and Adding NetBEUI 32 3.3 Checking and Adding TCP/IP 33 3.4 Checking and Adding File and Printer Sharing for Microsoft Networks 34 3.5 Checking and Adding Computer Name and Workgroup Name 34 4. Troubleshooting 35Appendix A Product Specifications 37 Appendix B Regulatory Compliance Information 40
1 Chapter 1 Introduction This chapter describes the package contents, PC Card description, system requirements, features & benefits, applications and network configurations of our wireless LAN products. 1-1 Package Contents The PC Card package contains the following items as shown in Figure 1-1 1. One PC Card 2. One Installation CD 3. One Quick Installation Guide Figure 1-1 1- 2 PC Card Descriptions The PC Card is a standard PC Card that fits into any PCMCIA Card Type II slot. The PC Card has a LED indicator and two antenna jacks as shown in Figure 1-2. Figure 1-2 1. Integrated, with built-in diversity Antenna 2. Link LED z Peer-to-Peer – Blinking, no matter the wireless is connected or not z Access Point – Solid GREEN when the wireless is connected z Off – No wireless activity Wireless LAN PC CardQuick Installation GuideWir ele ss LAN PC CardInsta llat ion CDIEEE 802.11b
2 1- 3 System Requirements Installation of the PC Card requires: 1. PC/AT compatible computer with PCMCIA Type II slot. 2. Windows 98//ME/2000/XP operating system environment. 3. Minimum 1.3M bytes free disk space for installing the PC Card driver and utility program. 1- 4 Features and Benefits 11Mbps data transfer rate High-speed data transmission High transmit output power (Long Range PC Card Only) Long operating range, up to three times range of standard products IEEE 802.11b compliant Fully interoperable with IEEE 802.11b compliant products Automatic data rate scaling at 11, 5.5, 2 and 1 Mbps Optimized throughput, range And connectivity Improved 64/128-bit WEP Engine Significantly improved throughput Wide coverage range up to 600/1200(Long Range PC Card only) meters in open space Wireless connectivity for all your computers Advanced Power Management Extended battery life Plug and Play PC Card interface Easy installation Significantly improved indoor multipath distortion Higher link quality in indoor environment 1- 5 Applications The wireless LAN products are easy to install and highly efficient. The following list describes some of the many applications made possible through the power and flexibility of wireless LANs: 1. Difficult-to-wire environments
3There are many situations where wires cannot or not easily be laid. Historic buildings, older buildings, open areas and across busy streets make the installation of LANs either impossible or very expensive. 2. Temporary workgroups Consider situations in parks, athletic arenas, exhibitions, disaster-recovery, temporary office and construction sites where one wants a temporary WLAN established and removed. 3. The ability to access real-time information Doctors/nurses, point-of-sale employees, and warehouse workers can access real-time information while dealing with patients, serving customers and processing information. 4. Frequently changed environments Show rooms, meeting rooms, retail stores, and manufacturing sites where frequently rearrange the workplace. 5. Small Office and Home Office (SOHO) networks SOHO users need a cost-effective, easy and quick installation of a small network. 6. Wireless extensions to Ethernet networks Network managers in dynamic environments can minimize the overhead caused by moves, extensions to networks, and other changes with wireless LANs. 7. Wired LAN backup Network managers implement wireless LANs to provide backup for mission-critical applications running on wired networks. 8. Training/Educational Facilities Training sites at corporations and students at universities use wireless connectivity to ease access to information, information exchanges, and learning. 1- 6 Network Configurations To better understand how the wireless LAN products work together to create a wireless network, it might be helpful to depict a few of the possible wireless LAN PC card network configurations. The wireless LAN products can be configured as: 1. Ad-hoc (or peer-to-peer) for departmental or SOHO LANs. 2. Infrastructure for enterprise LANs. 3. IP Sharing for 56K/ISDN TA/Cable/DSL Modem – Connect Internet and your SOHO network.
4 Ad-Hoc(peer-to-peer) Mode This is the simplest network configuration that several computers equipped with the PC Cards that form a wireless network whenever they are within range of one another (Figure 1-3). In ad-hoc mode, each client, is peer-to-peer, would only have access to the resources of the other client and requires no the access point. This is the easiest and least expensive way for the SOHO to set up a wireless network. Figure 1-3 A wireless Ad-hoc network Infrastructure Mode The infrastructure mode requires the use of an access point (AP). In this mode, all wireless communications between two computers have to be via the AP no matter the AP is wired to Ethernet network or stand-alone. If used in stand-alone, the AP can extend the range of independent wireless LANs by acting a repeater, which effectively doubling the distance between wireless stations as shown in Figure 1-4.
5 Figure 1-4 Infrastructure Mode Extended-range independent WLAN using AP as repeater If wired to an Ethernet network as shown in Figure 1-5, the AP serves as a bridge and provides the link between the server and the wireless clients. The wireless clients can move freely throughout the coverage area of the AP while remaining connected to the server. Since the AP is connected to the wired network, each client would have access to server resources as well as to other clients. Figure 1-5 Single AP bridge
6Access points have a finite range, on the order of 50 meters indoor and 100 meters outdoors. In a very large facility such as an enterprise, a warehouse, or on a college campus, it will probably be necessary to install more than one access point to cover an entire building or campus, as shown in Figure 1-6. In this scenario, access points hand the client off from one to another in a way that is invisible to the client, ensuring the connectivity. Wireless clients can roam seamlessly between different coverage areas and remain connected to the network. Figure 1-6 Multiple-AP and roaming Wireless Router and IP Sharing In infrastructure mode, in addition to acting as a bridge between an Ethernet and wireless network, the AP can be configured as a wireless router and IP sharing device for Internet access as shown in Figure 1-7. You don’t have to buy an expensive router. Nor you have to buy several modems and setup phone lines. Just share one AP, one Modem, single dial-up account, and one phone line, dozens of network users can go surfing the Internet concurrently.
7 Figure 1-7 Wireless router and IP Sharing
8 Chapter 2 Installing Drivers&Client Utility This chapter describes how to install the PC Card drivers and client utility under Windows 98/ME/2000/XP. 2- 1 Installation for Windows 98/ME/2000/XP During the installation, Windows 98/ME/2000/XP may need to copy Windows systems files from the Windows 98/ME/2000/XP installation diskette or CD-ROM. Therefore you will need a copy of the Windows 98/ME/2000/XP installation diskette or CD-ROM at hand before installing the driver. On many systems, instead of a CD, the necessary installation files are archived on the hard disk in C:\WINDOWS\OPTIONS\CABS directory. Installation Procedure: Before installing this new driver in your computer, you need to remove all of the Wireless LAN PC Card’s drivers that you had installed in your computer (Please refer to page 9). Please follow the installation procedures below. ~ Install Wireless PC Card Driver 1. Turn on the computer. 2. Be sure that there is no Wireless LAN PC Card has been inserted yet. 3. Insert the Wireless LAN Installation CD into your CD-ROM drive. 4. The setup program “wlan_ForWindows304.1.exe” should pop out automatically. If it does not start, you can run it manually by selecting RUN from the Start menu and running “wlan_ForWindows304.1.exe” from CD-ROM drive. 5. Follow the instruction and finish the installation. 6. Insert the PC Card into the PCMCIA slot of your computer. 7. The Wireless LAN PC Card will be found and driver will be installed without restart the computer as shown in Figure 2-1-1.
9 Figure 2-1-1 8. Make sure that the network protocol parameters are set correctly for your computer. These include the IP address, Subnet mask, Gateway and DNS. If you are unfamiliar with how to set network protocol parameters, refer to Chapter 3 Connection to Network for details.
10 ~ Install Wireless PC Card Driver 1. Turn on the computer. 2. Right-click on My Computer icon on the Windows desktop to chose Properties and then System Properties window will pop out. 3. Click on the tab Device Manager and then move the mouse to Network Adapters node to expend the tree list by clicking on the plus sign. 4. Remove Wireless LAN PC Card that you have installed already. 5. Uninstall the old driver. 6. You must remove the old existing driver before installing the new driver. 7. Click Start icon on the tool bar and select Control Panel from Setting item. 8. Double click the Add/Remove Programs icon to open up Add/Remove Programs window then choose the tab Install/Uninstall, pick up the utility that you have install for Wireless LAN PC Card and press the button Add/Remove. 9. The dialog box will show up to confirm if you want to remove the driver and all of its components. Please click on OK button to complete the uninstallation procedures of the old driver. 10. Restart the computer and remove the Wireless LAN PC Card. 11. Follow the Install Wireless PC Card Driver to complete the installation procedures. 12. If the computer still use the old driver, please follow the step below: a. Right click the My Computer icon on the desktop and choose Properties. b. In the Device Manager window as shown in Figure 2-1-2, right click the Wireless LAN PC Card from the Network Adapter’s tree list and choose the Properties.
11 Figure 2-1-2 c. Click Update Driver button from the Driver tab as shown in Figure 2-1-3. Figure 2-1-3
12d. Click next of the Welcome to Upgrade the Device Driver Wizard dialog box. The Install Hardware Device Driver dialog window will be showed up as shown in Figure 2-1-4. Figure 2-1-4 e. Choose Display a list of the known drivers for this device so that I can choose the specific driver and click Next as shown in Figure 2-1-5. Figure 2-1-5
13f. In the Network Type dialog window, choose Network adapters and then click Next as shown in Figure 2-1-6. Figure 2-1-6 g. Select the network adapter for 802.11b Wireless LAN PC Card and then click Next. The Start Device Driver Installation dialog window will show up, click Next to enter the Digital Signature Notice window as shown in Figure 2-1-7. Figure 2-1-7
14h. Click Yes to continue the installation procedure as shown in Figure 2-1-8. Figure 2-1-8 i. Click Finish to complete the installation procedure as shown in Figure 2-1-9. Figure 2-1-9
15 2- 2 Checking after Installation After installing the driver and utility, follow the steps below to check that the PC Card is operating correctly. 1. Click the Start button, select Settings, and then click Control Panel. 2. In the Control Panel window, double-click the System icon, and then select the Device Manager tab. 3. Double-click Network adapters, then select Wireless LAN PC CARD as shown in Figure 2-2-1. Figure 2-2-1 4. Click the Properties button, and then check the message. This device is working properly is displayed for Device status as shown in Figure 2-2-2.
16 Figure 2-2-2 5. If you find the Yellow (?) sign on the adapter or the above message is not displayed, it shows the installation is not successful or the wireless LAN PC Card is not operating properly. Uninstall and re-install the driver, referring to Chapter 2-6 Uninstalling Driver and Utility.
17 2- 3 Wireless LAN Client Utility Wireless LAN Client Utility is used to display or change the PC Card information about link, configuration, encryption, and utility/driver/firmware version information. The client utility will also help you with site selection. The client utility will be installed automatically after installing the driver and utility. The PC Card Utility icon will appear in the System Tray in the bottom right corner on your screen as shown in the Figure 2-3-1 and Table 2-3-1. Figure 2-3-1 Green indicates good or excellent link status Yellow indicates fair link status Red indicates no or poor link status Table 2-3-1 After finishing installing the driver and utility, the client utility will automatically be executed and show a small green radio icon at the right corner of Taskbar whenever the PC Card is inserted into the PC Card slot of your computer. Double-click the radio icon to open the Wireless LAN Client Utility window as shown in Figure 2-3-2. You can click the taps on the top of the windows to select various screen messages. Below we explain the use and meanings of the various screen messages.
18 Figure 2-3-2 1. Menu of System Icon Right-click on the system tray icon, the icon menu will display as shown in Figure 2-3-3. Below is the introduction to this icon menu. Figure 2-3-3
19z Wireless Radio On/ Wireless Radio Off The first two items in the icon menu are used to turn on/off the wireless radio. When the wireless radio is turned off, a red cross is placed on the system tray icon as shown in Figure 2-3-4. When the wireless radio is turned on, the icon will vary in colors depending on the link quality as described in the Table 2-3-1. Figure 2-3-4 z Remove Status Icon This item allows you to set the System Tray Icon to appear or disappear. Once you choose this item, the system will display the dialog box to confirm if you want to remove the System Tray Icon. You can also set the System Tray Icon to disappear permanently by checking the box Remove Status Icon Permanently as shown in the Figure 2-3-5. When the computer is restarted, the System Tray Icon will come back if you have removed the System Tray Icon before but not checked the box Remove Status Icon Permanently. Figure 2-3-5
20z Wireless Network Status This item launches the PC Card Utility with the tab Status that displays the information about link status to users. z Advanced Configuration This item launches the PC Card Utility with the tab Configuration that allows users to configure PC Cards to suit their specific network settings. z WEP Encryption This item launches the PC Card Utility with the tab WEP Encryption that allows users to set up the Encryption Key which is used in their network environment. z SITE Survey This item launches the PC Card Utility with the tab Site Survey that allows users to browser the available active access points which users can connect to by pressing the Connect button. z Version Information This item launches the PC Card Utility with the tab About that displays the information about driver version, utility version, and firmware version.
212. Status Shows status information about the radio link, as shown in Figure 2-3-6. Figure 2-3-6 z Associated BSSID – means the wireless client is connected to an access point. BSSID is shown in the form of six hex digits which is the MAC address of the access point. z Scanning – means the wireless client is searching for an available access point in infrastructure mode. z Disconnected – means there are no access points or other wireless clients (if communicating in Ad-hoc mode), or the PC Card is unplugged in your computer. Current Tx Rate (Mbits/s) The data speed that wireless client is transmitting. Current Channel The operation radio frequency channel that wireless client is using in infrastructure mode. In infrastructure mode, wireless client will always go the same channel as their Access Point.
22 Throughput (Bytes/sec) z Tx: shows the outgoing (sent) data speed. z Rx: shows the incoming (received) data speed. Link Quality In infrastructure mode, this bar displays the transmission quality between a WLAN station (Access Point) and Wireless LAN PC Card. In Peer-to-Peer mode (Ad-Hoc), this bar displays the link quality between two Wireless LAN PC Cards. Signal Strength This bar displays the signal strength level. The higher bar is, the more powerful radio signal is received by the PC Card. Disable/Enable Radio This button is used like a switch that allows users to turn off the wireless radio by clicking this button and turn it on again. Rescan The radio will rescan all available channels by pressing this button. You can push this button to rescan the channels for better link quality when the link quality is poor. 3. Configuration Make configuration changes by specifying the proper configuration parameters on this configuration tab as shown in Figure 2-3-7. Figure 2-3-7
23Profile You can give a name for this field to a setting of configuration parameters, such as Network Name, Network Type, Transmit Rate, Encryption (WEP Security), etc. It makes much easier for users to change WLAN configuration settings who need to switch working places frequently. Suppose that a user has to work between the two different offices where there are different network settings. In this case, this user just needs to setup two profiles for the two offices and simply selects the proper profile when the user switches to the different office. Network Name For infrastructure mode, you need to type in the SSID of the access point to which your computer connects. For Ad-Hoc (peer-to-peer) mode, you need to type in the virtual SSID of the Ad-Hoc network to which your computer attaches. Network Type There are two types of network modes in this drop-down list as shown in Figure 2-3-8, Peer-to-Peer and Access Point (Infrastructure). Figure 2-3-8
24 z Peer to Peer: If two or more stations exchange data directly without an access point, you need to select Peer-to-Peer mode. Each station in a Peer-to-Peer (Ad-Hoc) network must specify the same network name (SSID) and peer-to-peer channel. z Access Point: If at least one access point involves in the communications in a group of stations, you need to select Infrastructure mode. Each station needs to specify the same network name (SSID) as the access point. Please refer to the section 1-6 for more details about peer-to-peer mode and Access Point (infrastructure) mode. Peer-to-Peer Channel This option is just for Peer-to-Peer (Ad-Hoc) mode. You need to specify a channel on which the communications are established. Each station in a Peer-to-Peer (Ad-Hoc) network must specify the same channel and network type (SSID). Power Save Mode Power Save function as shown in figure 2-3-9 .This function can conserve more battery energy and extend the battery life. This function has three options for power save mode. Below is detailed description. 1.On: Enable Power Save function. 2.Off: Disable Power Save function. 3.Auto: Utility will automatically detect what kind of power supply a machine uses and then determine to enable or disable Power Save function. If device uses battery, Power Save Mode is set to on. If device uses AC Power, Power Save Mode is set to off.
25 Figure 2-3-9 Transmit Rate The transmission rate on which the data packets are transmitted by the client can be specified in this drop-down list as shown in Figure 2-3-10. Below are the available transmission rates. Full Automatic PC Card chooses the highest available transmission rate 11 Mbps Allows only 11 Mbps operation 5.5 Mbps Allows only 5.5 Mbps operation Auto 1 or 2 Mbp Allows only 1 or 2 Mbps operation Table 2-3-2
26 Figure 2-3-10 Defaults Once this button is pressed, all the settings will be set back to the default settings. 4. Encryption Encryption is designed to make the data transmission more secure. you can select 64 or 128-bit WEP (Wired Equivalent Privacy) key to encrypt data (Default setting is Disable) as shown in Figure 2-3-11. WEP encrypts each frame transmitted from the radio using one of the Keys from this panel. When you use WEP to communicate with the other wireless clients, all the wireless devices in this network must have the same encryption key or passphrase. Choose one of the encryption key (64 bit or 128bit) from the Encryption (WEP Security) drop-down list to create encryption key. Click either on Create Keys Manually radio button or on Create Keys with Passphrase radio button. There are two ways, Alphanumeric and Hexadecimal, to set the different characters as shown in Table 2-3-3. z Create Keys ManuallyÆAlphanumeric Type 5/13 alphanumeric characters in the key field z Create Keys ManuallyÆHexadecimal Type a 10/26 hexadecimal numbers (1-9; A-F) in the key field
27z Use WEP Key This drop-down list allows you to specify which of the four encryption keys that you want to use. z Create Keys with Passphrase Type a character string in the field Passphrase. z Disabled Select Disabled item in the Encryption(WEP security) drop-down list allows you to disable the encryption function. Data Mode Alphanumeric Hexadecimal 64 bit 5 10 128 bit 13 26 Table 2-3-3 Figure 2-3-11
285. Site Survey Browse the available access points in your network environment by clicking the Rescan button and make a connection to one of them by pushing the Connect button in the Site Survey tab as shown in Figure 2-3-12. SSID The Network Type (SSID) of an access point RSSID The MAC address of an access point Channel The operating channel number of an access point Link Quality The quality of link status WEP“Y” indicates the WEP function enabled in an access poin “N” indicates the WEP function disabled in an access point Mode Indicates which mode does the access points use (Infrastructure or Peer to Peer) Figure 2-3-12
29 6. About About tab shows the product/driver/utility/PC Card firmware version as shown in Figure 2-3-13. Users have to use this version number when reporting their problems to technical support. Figure 2-3-13
30 2- 4 Uninstalling Driver and Utility If the PC Card installation is unsuccessful for any reason, the best way to solve the problem may be to completely uninstall the PC Card and its software and repeat the installation procedure again. 1. Insert the Wireless LAN PC Card into the PCMCIA slot. 2. Right click My Computer--->Select Properties. 3. On the Hardware tab, choose Device Manager, and click Network .Adapter. 4. Choose Wireless LAN PC Card and remove it. 5. After removing the Wireless LAN PC Card, restart your computer. 6. Click the Start button, select Control Panel from Settings. Double click the Add/Remove Programs icon on the Control Panel. In the Change or Remove Programs dialog window, choose the 802.11b Wireless LAN for Windows and click Change/Remove button to uninstall this programs as shown in Figure 2-4-1. Figure 2-4-1
31 Chapter 3 Connecting to a Network This chapter describes how to prepare for connection to network after install the PC Card drivers and utility. The following is required for all computers if you want to connect to a network. 1. Check Client for Microsoft Networks is installed. 2. Check NetBEUI -> Wireless LAN PC Card installed. 3. Check TCP/IP -> Wireless LAN PC Card is installed. 4. Check file and printer sharing for Microsoft Networks. 5. Check computer name and workgroup name. 3-1 Checking and Adding Client for Microsoft Networks The Client for Microsoft Networks enables you to connect to other Microsoft Windows computers and servers and use the files and printers shared on them. If you work on Microsoft network environment, you need to set up Client for Microsoft Networks. 1. After finishing installing the driver & utility and rebooting the computer as described in Chapter 2. The computer will show a dialog box titled Enter Network Password dialog box. Enter your password if it had been set or just click Cancel. 2. Click Start button, select Settings and then click Control Panel to open the Control Panel window. 3. In the Control Panel window, double-click the Network icon to open the Network dialog box. 4. Select Configuration tab to check Client for Microsoft Networks is installed as shown in Figure 3-1. If no, click the Add button. Select Client and click the Add button.
32 Figure 3-1 5. Select Microsoft for Manufacturer and Client for Microsoft Networks for Network Client, and then click OK. 3-2 Checking and Adding NetBEUI NetBEUI is a protocol you can use to connect to Windows NT, Windows for Workgroups, or LAN Manager servers. If you work on Microsoft network environment, you need to set up NetBEUI protocol. 1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. 2. Select Configuration tab to check NetBEUI -> Wireless LAN PC Card is installed. If no, click the Add button. Select Protocol and click the Add button. 3. Select Microsoft for Manufacturer and NetBEUI for Network Protocol, and then click OK.
333-3 Checking and Adding TCP/IP TCP/IP is the protocol you use to connect to the Internet and wide-area networks. If you want to connect to Internet, you need to set up TCP/IP protocol. 1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. 2. Select Configuration tab to check TCP/IP -> Wireless LAN PC Card is installed. If no, click the Add button. Select Protocol and click the Add button. 3. Select Microsoft for Manufacturer and TCP/IP for Network Protocol, and then click OK. 4. If yes, double-click TCP/IP -> Wireless LAN PC Card to open TCP/IP properties as shown in Figure 3-2. Due to different network applications there are many different settings here. You can select either Obtain an IP address automatically or specify an IP address. If you use the Specify and IP address, then you need to enter an IP address, Subnet Mask, Gateway IP address, and DNS Server IP address for connecting to Internet. Figure 3-2
34 3-4 Checking and Adding File and Printer Sharing for Microsoft Networks File and printer sharing for Microsoft networks gives you the ability to share your files or printers with Windows NT and Windows for Workgroups computers. If you want to share your files or printers with Microsoft networks, you need to set up this service. 1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. 2. Select Configuration tab to check File and printer sharing for Microsoft Networks is installed. If no, click the File and Printer Sharing button. 3. In the File and Print Sharing window, select what you need, and click OK. File and printer sharing for Microsoft Networks, and then click OK. 3-5 Checking and Adding Computer Name & Workgroup Name Windows uses the computer name and workgroup name to identify your computer on the network. Please enter a unique name for your computer, the workgroup it will appear in, and a short description of the computer. 1. Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. 2. Select Identification tab or User Information tab to check the computer name, workgroup and computer description are entered. If no, enter a computer name, a workgroup name and then click OK. The description field may be left blank. If you want to share data with other persons, make sure you have the same workgroup name.
35 Chapter 4 Troubleshooting This chapter describes the problems and corresponding solutions that may occur when installing a PC Card. Symptom Solution Windows does not detect the PC Card when installed. Verify that the PC Card is properly inserted into the PC Card slot. Check whether the computer has a Plug and Play BIOS. Windows 98/ME/2000/XP might not detect the PC Card if a previous installation of the PC Card was cancelled before it was finished. Remove the previous driver, and redo the installation again. Driver fails to load A resource conflict could exist. For Windows 98/ME/2000/XP, use the Device Manager to resolve resource conflicts. Select System from the Control Panel, then click on the Device Manager tab. Device conflict on a Windows system A device conflict under Windows 98/ME/2000/XP may be related to the PC Card. For Windows 98/ME/2000/XP, use the Computer properties to identify the used I/O port addresses and IRQ values. If there is a device conflict, select alternative settings for I/O Base Address or IRQ values. If you know which device is conflicting with the PC Card, you have the option of changing that device’s I/O address or IRQ instead of changing the PC Card.
36No resource conflicts were detected, but the wireless station does not attach to the network Verify that the SSID of the PC Card matches that of the access point. Use the Network Configuration Properties Application in the Control Panel to modify the SSID. Verify that the Network Mode of the PC Card is configured correctly. Nonfunctioning card LED The PC Card is not powered on. The cause may be: y No Driver loaded or installed. y Card – Driver mismatch, which prevented the driver from loading. y Device conflict, which prevented the driver from loading. Actions: y Verify that a driver has been installed. y Determine if there is a conflict with another device. Weak signal or intermittent connection. Try reorienting the antenna. The PC Card antenna is attached to the end of the PC Card. For best use of the antenna: Keep the area around the antenna clear from materials that could block radio transmission, such as metal objects, electronic devices, and cordless telephones. If your signal is weak, change the direction of the antenna slightly. If necessary, move your notebook computer a few inches to find a better signal. Use the Link Quality and Signal Strength display in the Client Utility to determine the best location and orientation for a network connection.
37 Appendix A Product Specifications General Radio Data Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-Back Range (open environment) 11 Mbps – 150m 450m(Long Range PC Card ) 5.5 Mbps –200m 600m(Long Range PC Card) 2 Mbps – 250m 750m(Long Range PC Card) 1 Mbps – 400m 1200m(Long Range PC Card) Operating Voltage 3.3V/5V Regulation Certifications FCC Part 15/UL, ETSI 300/328/CE Compatibility Fully interoperable with IEEE802.11b compliant products LED Indicator RF Link activity Network Information Network Architecture Support ad-hoc, peer-to-peer networks and infrastructure communications to wired Ethernet networks via Access Point Drivers Windows 98/ME/2000/XP/CE3.0 Access Protocol CSMA/CA Roaming IEEE802.11b compliant Security 64/128-bit WEP data encryption
38Radio Frequency Band 2.4 – 2.484 GHz Radio Type Direct Sequence Spread Spectrum (DSSS) Modulation CCK (11, 5.5Mbps) DQPSK (2Mbps) DBPSK (1Mbps) Operation Channels 11 for North America, 14 for Japan, 13 for Europe, 2 for Spain, 4 for France RF Output Power 15 dBm 20 dBm (Long Range PC Card for CE) 23 dBm (Long Range PC Card for FCC) Antenna Two jacks for external antenna Sensitivity @FER=0.08 11 Mbps < -85dBm <-87dbm( Long range PC Card) 5.5 Mbps < -88dBm <-90dbm( Long range PC Card) 2 Mbps < -91dBm <-93dbm( Long range PC Card) 1 Mbps < -93dBm <-95dbm( Long range PC Card) Environmental Temperature Range 0 to 50 C (operating) -20 to 80 C (storage) Humidity (non-condensing) 5% to 95% typical
39 Physical Specifications Form Factor PCMCIA Type II PC Card Dimensions 118(L) mm x 54(W) mm x 7.5(H) mm Weight 40 g
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one of thefollowing measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved bythe party responsible for compliance could void the user's authority tooperate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operatedwith minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter. 40
This device is intended only for OEM integrators under the followingconditions:1) The antenna must be installed such that 20 cm is maintained between theantenna and users, and2) The transmitter module may not be co-located with any other transmitter orantenna.As long as 2 conditions above are met, further transmitter test will not berequired. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this moduleinstalled (for example, digital device emissions, PC peripheral requirements,etc.).IMPORTANT NOTE: In the event that these conditions can not be met (forexample certain laptop configurations or co-location with another transmitter),then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integratorwill be responsible for re-evaluating the end product (including the transmitter)and obtaining a separate FCC authorization.End Product LabelingThis transmitter module is authorized only for use in device where the antennamay be installed such that 20 cm may be maintained between the antennaand users (for example :AP, ROUTER). The final end product must be labeledin a visible area with the following: “Contains TX FCC ID: NI3-IS20V312-PLUS”.Manual Information That Must be IncludedThe OEM integrator has to be aware not to provide information to the end userregarding how to install or remove this RF module in the users manual of theend product which integrate this module.The users manual for OEM integrators must include the following informationin a prominent location “ IMPORTANT NOTE: To comply with FCC RFexposure compliance requirements, the antenna used for this transmitter mustbe installed to provide a separation distance of at least 20 cm from all personsand must not be co-located or operating in conjunction with any other antennaor transmitter.41

Navigation menu